Panasonic NVSD410 Operating Instructions

Panasonic NVSD410 Operating Instructions
 TE TESS wr A cma
ord
PRE es rem TE ES
‘Video Cassette Rec
NV-SD260B
“= LA == Сэр A a = =.
Operating Instructions
der
——==Xx— a —
a MFP SA CSP CL -- =. 1
pe = EE pe ee pe -— = жет - - - o -
TT a TT ETES
TONE TL EL IE RT ae Ne ee AE
=
SUPER DRIVE
ATTEN
EF
== ae Ba SE
EA очко отн ==
- -=
==" product, pleas
Dear Customer
May we take this opportunity to thank you for purchasing Crystal View Control
this Panasonic Video Cassette Recorder. introducing Crystal View Control. and innovative new
We would particularly advise that you carefully study the rechnofogy tor high p th Verte te re pe
Operating Instructions before attempting to operate the bot oToprocessor to de « ai y con rol the relationship
unit and that you note the listed precautions. SA Deriormanca of each. The results consistentiy
Auto Setup optimum picture quality.
PDC (Programme Delivery Control)
Connect the aerial lead and the mains lead. 1 What Is PDC? 7
(See page 12.) J PDC is a signal system transmitted by TV broadcasters to
control the start and stop time of each programme. This
signal is used by the VCR to control the start and stop
4 N time of programmed timer recordings.
| Turn on the VCR. | PDC is particularly useful when the broadcaster changes
the time for a programme from the published time, the
VCR's timer recording start and stop time will be
Auto Setup Is finished. controlled by the broadcaster, e.g. when the programme is
delayed or extended. Recording can also be interrupted
Video Plus+ Programming System by the broadcaster, e.g. news flash, and resumed when
Programming is now easier than ever: simply enter the the programme restarts.
PiusCode provided in the programme schedule column At present PDC transmission does not cover all areas and
carried by newspapers and magazines. stations in the UK, please check with the broadcasters in
e Video Plus+ and PlusCode are trademarks of Gemstar your area for detaits.
Development Corp. Vidao Plus+ system is -
manufactured under license from Gemstar Development The illustrations shown in this operating instruction
Corporation. use mode! No. NV-SD410 Series.
(2)
Contents
es i Caution for ÂC Mains Lead .... ......._ ........ 4
TE Unpacking .............es-ececerzaionaracmno. 5.
IMPORTANT Controls and Connection Sockets OT 8
Your attention is drawn to the fact that _ WALI FLEE CAN Sr FI IE LEI NE EE со. я ная в EA La
the recording of pre-recorded tapes or
discs or other published or broadcast - ‘
material may infringe copyright laws. Setting U e
WARNING
TO REDUCE THE RISK OF FIRE OR Connections ...........—e—.— e sremvierec ea... 12
SHOCK HAZARD, DO NOT EXPOSE - Tuning the TVtoyour VCR .................... 15
THIS EQUIPMENT TO RAIN OR Auto Setup RR a aa ea « 16
MOISTURE. Satellite Settings .............erecreamrorame.. 17
В =~ . -- недо кокс До. > 1 re 2 = токо TT TONE — =
FOR YOUR SAFETY а = -
E DO NOT REMOVE QUTER COVER,
To prevent electric shock, do not remove -
a alt cobos poro PT w PRÓROR 22 ee te 2
RR 0 "9 Lee pepe a TG LL J Manual Recording ...........—...—.eeermeamers 24
Timer Recording ............. reee, кк.. 28
elUsing On ScreenDisplay . . .................... 28
e Programming the Video Plus+ PlusCode ......... 30
Editing ....... i ieee 31
sAssembly Editing ........... iii, 31
OtherFunctions ............... coccinea. 32
_various Settings
Storing TV Broadcasts into your YCR ........... 34
Settings Using On Screen Display .............. 38
Setting the Clock of your VCR . . . .............. 40
Setting the Remote Controller for Operation of
YOLF TV ....ciivaaaaaaaanoaavaarereanmor 41
= ape
‘Helpful Hints
Before Reauestinag Service ...... ... :......... 44
Precautions ...........eee._.—.e0nerice ón were. 47
Speclfications , . ............. ........ Back Cover
(3)
(4)
Caution for AC Mains Lead
LL АВ
ah
PIE ER te:
AENA PL BL:
e
NELLIE IN
It
it,
de na i mn RE IR IED Cai a
oll
For your safety please read the following text
carefully
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5 amp fuse is fitted in this plug.
Should the fuse need to ba replaced please ensure
that the replacement fuse has a rating of 5 amps and
that it is approved by ASTA or BS! to BS 1362.
Check for the ASTA mark <@> or the BS! mark Y on
the body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
if vou lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local Panasonic Dealer,
IF THE FITTED MOULDED PLUG 1S UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE
PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG |5 INSERTED INTO
ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring
code as shown below.
If in any doubt please consult a qualified electrician,
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal in the plug which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal in the plug which is marked
with the letter L or coloured RED.
Under no circumstance should either of these wires
be connected to the earn terminal of ine three pin
plug, marked with the letter E or the Earth Symbol =.
How to replace the Fuse
¢ There are two types of the AC Mains Lead
assembly: (A) and €) as shown below,
1 Open the fuse compartment with a screwdriver.
2 Replace the fuse and fuse cover.
TYPE ®
1
MI
AI ECETIA MORAL FLEUR HAAR EA RO °
ICA EL) REN a AL ORE ATT GEA SEA LEA) BER RES oh
A
Unpacking
Check and identify the supplied accessories, and then set up this VCR after reading
“Setting up”.
[+]
||
RF coaxial cable for
connecting between this
VCR and a TV (1 pc.)
VJA0728-A or VJAO963
AC mains lead (1 pc.)
VJAC733
Batteries for the
remote controller
(2 pcs.)
LIM3 or RE type
¡o
BB
Remote controller
(1 pc.)
NV-SD260B: VEQ1863
NV-SD410B, BL: VEQ1867
Jada
O0
QQ OO
(5)
Infra-red Remote Controller
NV-SD410B, BL: NV-SD250B: ” e IE =
17
(6)
=~ E A An WON
POWER (TW)
To switch the TV from on to standby mode or vice
versa. in standby mode, the TV is still connected to
the mains.
eWith some TV models, it may only be possible to
switch the TV to standby mode using this button.
in this case, use TV/AV or V 2 (TV) to switch the
TV on. о
TV/AV
To select the TV input.
POWER (VCR)
To switch the VCR from on to standby mode or vice
versa. in standby mode, the VCR is still connected to
the mains. -
OSD
For the On Screen Display Function.
REW (REWIND)
In the stop mode: To rewind the tape.
in the playback mode: To search backward.
in ihe rewind mode: To obtain high speed picture.
"GT is tit.
PLAY
To start playback. “> 15 Lit.
PAUSE/STILL
During playback: Still picture.
During recording: To interrupt recording.
REC
To stant a recording.
e Press both buttons simultaneously.
Y A (VCR)
To select the required programme position (TV
station) of the VCR.
16
15
14
13
12
11
10
10
11
12
wih
No function
25
No function
26
27
28
THACKING/V-LOCK
For manual tracking adjustment
when, for exampie, noise bars on the picture are
batter removed manually than by the automatic digital
tracking control. - ВЕ
Press both buttons together to return to automatic
dightar tracking control. TT TT
For slow tracking adjustment
(Only Tor NV-SD4105,5L}
When noise bars appear during Still or Slow
playback, switch over to slow playback and adjust
with the + or — bution to reduce the noise bars.
For vertical locking adjustment
Use the + and — buttons to minimize any vertical!
jitter curtng stitl-picture ptayback. ВЕ
e Even after manual adjustment, noise bars or vertical
jitter may not bs sliminated completely, especially
for tapes recorded on another VCR. This is not
malfunction.
NV-SD260B: No function
NV-5D410B, BL: SLOW
For the slow motion playback
function. “T>” is HL.
FF (FAST FORWARD) Ш a
In the stop mode: To fast forward the tape.
In the playback mode: To search forward.
in the fast forward mode: To oblain high speed
picture.
“Tis Н.
STOP
To stop any playback or recording.
14 INDEX
For the index search function,
TE Y AfTU
7 (TU
To select the required programme position (TV
station} of the TV.
16 VOLUME
To adjust the volume of the TV.
17 Infra-red Transmitter
18 v A
To programme a timer recording.
19 DATE
To programme a timer recording.
20 DISPLAY
To change the indication on the VCR Display.
— Clock— Counter— Remaining Tape Time——
|
_ |
21 RESET
To reset the tape counter (elapsed time) to “0:00.00°.
e The tape counter is automatically reset to “0:00,00”
when a vídeo cassette is inserted.
22 CHECK
Ta check timer programmes.
23 ZERO STOP
For the zero stop function.
24 CANCEL
To cancel the settings made for a timer recording.
25 INPUT SELECT
To select the A1 or A2 external recording source. -
26 RECORDING SP/LP
To select the tape speed desired for recording.
SP gives the best picture quality.
LP gives the longest recording time.
27 TV SELECT
To set the remote coniroller for operation of the TV.
28 EXIT
To make On Screen Display disappear onthe TV
screen.
29 STORE
To make selections from On Screen Display.
30 à V <>
To make selections from On Screen Display.
31 MENU
To make On Screen Display Main Menu appear on
the TY screen.
32 Programme Position Selector Buttons
eTo select the programme positions (1-99).
3;
19: I-D-J
sTo select the satellite programme positions
(SAT 1— SAT 29)
SAT 9:C9)-C9-
SAT 19: DI-DI-D
* To enter a PlusCode.
33 VIDEO PLUS+
-— For the Video Plus+ programming.
34 TIMER REC
To turn the timer recording function on and off.
M Is lit or not lit. o
Once operating timer recording function, the normal
VCR operation is not possible unless this button is set
to off.
35 OFF
To programme a timer recording.
36 ON
To programme a timer recording.
Power Source for the Remote Controller
The remote controller is powered by 2 “AA”, "UM3” or “R6”
size batteries. The life of the batteries is about one year,
although this depends on the frequency of use.
Precautions for Battery Replacement
eo nad the new batteries with their polarity (& and 53)
aligned correctly.
«Do not apply heat to the batteries, or an internal
short-circuit may occur.
eif you do not intend to use the remote controller for a
long period of time, remove the batteries and store them
in a cool and dry place.
eo Remove spent batteries immediately and dispose of
them.
eDo not use an old and a new battery together, and never
use an alkaline battery with à manganese battery.
Installing the Batteries
(7)
(8)
Controls and Connection Sockets
This gives a detailed explanation of the function of each button, switch and connection socket.
©
Ф
infra-red Signal Transmitter
The satellite receiver control signal are transmitted
from here to the satellite receiver.
Cassette Compartment
insert a video cassette here.
REW (REWIND)
In the stop mode: To rewind the tape.
In the playback mode: To search backward.
In the rewind mode:
"<< is lt.
PLAY
To start playback. "P>” is lit.
FF (FAST FORWARD)
In the stop mode: To fast forward the tape.
In the playback mode: To search forward.
In the fast forward mode: To obtain high speed
picture.
“>>” is ft.
STOP
To stop any playback or recording.
POWER AA
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
connected to ine mains.
EJECT
To eject a video cassette.
Infra-red Remote Control Recelver Window
CVC {Crystal View Control) Indicator
Indicates that the CVC function is active.
This indicator is always lit when the power is on.
Display
/
< бет
To obtain high speed picture.
sd са
N
NT N
€) TIMER REC
To tum the timer recording function on and off.
[ is dif or not HT р
Once operating timer recording function, the normal
VCR operation is not possible uniess this button is set
to off.
\” ^^
To select the required programme position (TV
station).
REC
To start a recording.
©
©
D
©
ANT TEE ATV
e
N
ooDFazc
gocai-caad
AC IN,
SECTEUR, TEE” SIGMA,
RE Def |
1 OF fay ¡
; ic ©; | 1 i -
[es ¿Da
rm A AAA =
RF IN
To connect to the external aerial.
CH ADJ.
To adjust the RF transmitting channel 30-42,
AC IN-—-
To connect to the main power supply.
RF OFF/TEST SIGNAL
RF OFF. Set to this position when the VCR is
connected to the TV via the 21-pin scart
cable.
TEST SIGNAL OFF:
Set to this position when the VCR is
connected to the TV via the RF coaxial
cable only.
TEST SIGNAL ON:
Set to this position when tuning the TV into
the VCR.
The test signal is transmitted on
channel 36 initially.
Avi
This 21-pin scart terminal carries input and output
signals for both picture and sound. TV sets equipped
with a similar socket can be connected here.
This is also called Scart
Peritel
Euro Connector
Euro AV
©
21
3 5 7 8% 11 13 18 77 19
|
60002900200:
000002000 |
\
Z 4 E #8 15 32 14 16 28 2
1 AUDIO OUTPUT 13 RED GROUND
2 AUDIO INPUT 14 BLANKING
3 AUDIO OUTPUT GROUND
4 AUDIO GROUND 15 RED
5 BLUE GROUND 16 BLANKING
6 AUDIO INPUT 17 VIDEO OUTPUT
7 BLUE GROUND -
8 SWITCHING VOLTAGE 18 VIDEO INPUT
9 GREEN GROUND GROUND
10 No connection 19 VIDEO OUTPUT
11 GREEN 20 VIDEO INPUT
12 No connection 21 GROUND
Caution: RGB reservation for only E/E operation
when connecting the Pay TV decoder
AV?
To connect to a decoder, another VCR or a satellite
receiver.
e Only used as the input socket.
Note:
A satellite receiver shouid normaly be connected to AV1
teminal.
AV2 can be used for connection to satellite receiver, but
AV2 Connection on the MENU must first be set to
VCR/SAT. (See page 39.)
(9)
(10)
Setting Up
= — == — тента
[= -
о | 3 o =
Connections 2
ES
Nn
This tells you how to connect with an aerial, TV, etc.
Tuning the TV to your VCR
The VCR supplies a signal to the TV set via the RF
coaxial cable on channel 36 of the UK broadcasting
system. Your TV must be tuned into this channel in order
to view the VCR playback picture.
If the connection to the TV includes the 21-pin scart cable,
the playback picture can be viewed by selecting AV on
your TV. The RF coaxial cable must still be connected as
shown on page 12, but the TV need not be tuned to
channel 36.
Auto Setup a
When the VCR is turned on after connecting the aerial
lead and the mains lead, Auto setup (Auto tuning and Auto
clock setting) starts.
Satellite Settings
Satellite Setting
Preset Type
Teaching the VCR your satellite channels
How to select the satellite channel
(11)
Connections
This tells you how to connect with an aerial, TV. etc.
Basic Connections
The following connections are required to record and play
back the VCR through TV set: TV Set (Not supplied)
Aerial
(Not supplied)
1
Aenal Connector
e
3
To mains supply
Connection to a TV Set with 21-Pin Scart Terminal
TV Set (Not supplied)
Aerial
Aerial Connector (Not supplied)
- 1
21-Pin
Terminal
2
(Not supplied)
Note:
Set AF OFF/TEST SIGNAL to HF OFF when tha YCR is
To mains supply connected to the TV via the 21-pin scart cable.
(12)
Connection to a Decoder
TY Set (Not supplied) Aerial
E Ed es I —
Aerial Connector m | (Not supplied)
= 1
21-Pin Scart
—
kz IN
SECTE AT
Decoder
(Not suppiied)
de
(Not supplied)
To mains © mans Supply 21-Pin Scart Terminal
Notes:
® “НОВ” 15 an abbreviation for “RED/GREEN/BLUE”
signals. If the TV with RGB input capability is connected
to AV1 and the unit with RGB output capability is
connected to AV2, the TV can receive RGB signal from
the unit through the VCR.
eUse full-wired 21-pin AV cables for the connection.
eSelection of RGB or normal video output is done by the
external equipment connected to AV2 terminal.
eSet AF OFF/TEST SIGNAL to AF OFF when the VCR 1s
connected to the TV via the 21-pin scart cable.
Setting Up
(13)
Connection to a Satellite Receiver
Also refer to the operating instructions for the satellite receiver,
(» By means of 21-pin Scart Cable
Aerial Connector (Not supplied)
1
21-Рт Scan
Terminal
Satellite Receiver
(Not supplied)
с
a a
A
A
^^
21-Pin Scarf Terminal
{Not supplied)
To mains supply
Notes:
eSet RF OFF/ITEST SIGNAL to AF OFF when the VCR is connected to the TV via the 21-pin scart cable.
s Also refer to the operating instructions for the satellite receiver when connecting a decoder.
| How to install
We recommend that the satellite receiver be ; By means of RF Coaxial Cable
placed on top of the VCR, positioned so that a
the infrared signal transmitter is clearly TV Set (Not supplied) Aerial
: accessible.
| | Not supplied
Satellite 21-Pin Scart Cable (Not supplied)
Receiver or Coaxial Cable | 1 Satellite Receiver
| | (Not supplied)
| Infrared | _
Signal
a
Ea
Note:
AF output channel of the satellite receiver should be adjusted away from Channel 36,
which is used by the VCR, E.G. re-adjust to channel 38.
Also select "SKY ONE" or "SKY NEWS" on the satellite receiver to ensure reliable tuning
To mains supply before starting the Auto Setup.
(14)
Tuning the TV to your VCR
Operations
Setting Up
It is possible to view the video picture on your TV inthe — ....
same way that you watch TV broadcasts.
If you have connected the VCR to the TV through the
21-pin scart terminal, then you do not need to follow the
procedure mentioned below.
Preparations
®Тигп оп the TV.
eo Refer to the operating instruction of the TV set and carry
out tuning/preset procedure.
О
2
lp
3 On Screen Display
| AJO HILO oF Prog wl
1
| Ш CES |
i
: EXIT TEO
|
| I
JL —
(During Auto setup) {After Auto Setup)
Turn on the VCR.
—— = - =: Ге
To generate a test pattern, set RF OFF/
TEST SIGNAL to TEST SIGNAL ON.
Sei ihe TV io an unused position which you
wish to use for your video playback.
e Tune the TV until the test pattern appears on the screen.
eOn Panasonic TV the programme number O should be
selected to obtain best performance.
eWhen the VCR is turned on after connecting the aerial
lead and the mains lead, Auto setup (Auto tuning and
Auto clock setting) starts. (See next page.)
TEST SIGNAL
4
que
Note:
The test signal is transmitted on channel 36 of the UK
broadcasting channels. If you are encountering
interference from another broadcast on the video channel,
you may readjust to a free channel (30-42) by using the
CH ADJ. screw which is located on the rear of the VCR.
Please note that if the CH ADJ. screw is used then you
will have to retune your TY to the test signal as in item 2 to
4 above.
Set RF OFF/TEST SIGNAL to TEST
SIGNAL OFF.
(15)
eT rE CIN CR
es
Auto Setup
Auto Setup 1 Press MENU.
When the VCR is turned on after connecting the aerial
lead and the mains lead, Auto setup (Auto tuning and Auto
clock setting) starts.
On Screen Display
|
J i |
me e
| mom. 2 Select Station list.
| EXIT temo
|
| ar J- a mm
eo The Auto setup is searching for TV station from minimum
to maximum and memorizing the data for every
programme position.
e The Auto setup takes two or more minutes to complete
the search for TV station and the clock setting.
elf the clock setting screen appears after auto setup has
| 521775
been completed, refer to page 40 and proceed with the a) 4 : я i
setting. > С) fe 8 :
Note: Y) STORE | $ сп Е 3 ZZ z
If VCR is not correctly set by Auto setup, see Various or \ —_—
Settings on pages 34—37 and 40. Lo (3) li x ===" ||
}
A
Viewing the TV station list
«2 ~ ) >
Use the following steps to confirm that the Auto setup is | (The station names have : ° When the station names
correctly set. been entered and set “have not been correctly
| correctly. | : entered and set |
Preparations > TT]
e Confirm that the TV is on and the VCR viewing channel | *
is selected. i :
eo Turn on the VCR. | eT ро _
(~ Auto setup is completed. Perform the settings on
EN page 34.
(16)
Satellite Settings
| т a | | Q
Satellite Setting 5 Select Tuner type by refering to the enclosed satellite >
isti ind th
If you have connected a satellite receiver, you must Foes ror listing A find the tuner type number for your >
narform the settinas outlined below in accordance with the SEE =
connection method used. | " "| D
| Saletre co=rariios AVE :
1 Press MENU, and then select Settings. A) [sesos _ N
On Screen Display ® Tuner type 1 |
>+ 5-09
EXIT lea e re | :
2 Select Satellite. а | ов |
#7 > Tunes yp 2
O | em us == _
O) > O : or | elt is also possible to select by pressing numeric button.
STORE
ha : | 7 Press STORE, and then press EXIT.
| TE EE eue
|
QO > ©
3 Select Satellite connection, Notes: — =
SD am Tha VID mana mat haa mala Ea amaral aus mambo e
| HIG VAT TAY HWE WT AFIT UW WU ILL Л PELE К
| | models of Satellite Receiver, due to the choice of
@ Teva ом | Remote Control coding being beyond our control.
| masses — eCheck that the satellite receiver can be properiy
Y) | controlled. (Refer to page 19.)
| ;
| опр ЦЕН !
(Wy J
4 Select the position where the satellite receiver is
© 7 Satelite cornecdzn AVEO
— —
. i
y
X
я 1
wl! 1
I
1
— | —— —
9 ® we
—
\ «8 & _
No: When the satellite receiver is not connected fo
the VCR.
RF: When the satellite receiver is connected to RF IN
socket of the VCR.
AVi: When the satellite receiver is connected to AV1
socket of the VCH.
AV2: When the satellite receiver is connected to AV?
socket of the VCR.
e The Position item is also automatically set when RF
has been selected, and cannot be changed here. To
change position of satellite channel, refer to Manual
Tuning Procedure on page 34.
(17)
Teaching the VCR your
cataliita nhannale a Press STORE.
ACTA ER, ENEE, orl BLATT IN ID D On
e"... appears on the
Before proceeding with the Video Plus+ programming, programme position
perform the settings given below. Rem.
Operations OJ
STORE
1 Switch your satellite receiver on and.
go through each channel making a
note of which channel is on which
и 7 First you have to select position
programme position. Your list look where satellite receiver is
enmathin ka thic
something like this. connected, e.g. AV i, position 5 from
— — — station list.
ZT Ш — Channel ВЕ Key in the number 1 using the
ie ok + remote controller. This is the
1 Sky 1 programme position on the satellite
receiver which corresponds with the
2 Sky News correct channel (in our example, Sky
- 1) for the programme you've
3 Sky Movies selected.
a
The Mavis Channel
T —_— F
MTV Сосо)
е!с.
| gray =n nes Pia ]
> Get hold of a Satellite programme Press STORE
listing magazine or a newspaper 8 = ;
which gives Video Plus+ codes for. _ _Ñ ¿— — evcRawilgointotimer recording standby mode. ____
satellite channels for that day.
9 Press VIDEO PLUS+ again.
3 Chose any programme that will be
broadcast on the channel! you've Do
assigned to programme position 1 The video plus menu reappears.
on your satellite receiver (in our Repeat the same procedure, but this
example, Sky 1) and make a note of time selecting any programme that
its Video Plus+ code. o Is going to be broadcast on the
channel you've assigned to
4 Press VIDEO PLUS+ on your programme position 2 on your
remote nontrollar, satellite receiver. (In QUT example,
eThe Video Plus menu On Screen Display Sky News)
appears on screen eWhen you gel ta step 7 above, key in the
display. number 2.
D-AHD-
Input the Video Plus+ code.
Cn
(18)
a
pr ¡usd
i .
4 о
YT
: ©
How to Select the Satellite >
1 0 Repeat the procedure again, Channel >
gelactina nne nronramme in turn —
aiid tL Hh ed dd - LACT ELERA AR LA Ah +=
from each of the channels on your TTT TT D
satellite receiver (Sky Movies, The — in Y
Movie Channel, MTV, Disney e ere
Channel, Bravo, UK Gold, etc.). =
Press TIMER REC button to cancel
the timer recording standby mode.
1 1 Cancel all programming by pressing
CHECK, A Y, and CANCEL.
Ha 2 »5
tJ
The VCR has now learnt to recognize the individual
satellite channels from Video Plus-+ codes. In future,
when you want to record, say a programme from SKY 1,
all you need to do is key in the appropriate Video Plus+
code. The correct satellite channel, in this case, will
automatically appear in the on screen display —you don't
have to enter it manually.
Press the numeric buttons on the remote controller.
SAT 9: = ED ED _ Dela ELSE CE —
SAT 19: DD MM oT
® There will be a slight delay after pressing a button before
channel change occurs. This is due to signal conversion.
* The range of satellite channels available for selection is
1 through 89.
e With some satellite receivers, it is not possible to select
satellite channeis up to 99.
eVith some satellite receivers, it is not possible to select
any more channels beyond the highest number of the
channels which can be selected by the satellite receiver
if that number is 99 or less.
IARI oras AAA A IEA A IA
With some satelite receivers, itis necessary t tc leave a
short interval after seiecting one channel before
attempting to select another channel.
e[f the display on the satellite receiver fails to indicate the
channels, refer to the operating instructions of the
satellite receiver and follow the procedure for displaying
the channels.
(19)
(20)
Basic Operations
Playback
Manual Recording
Basic Operations
(21)
Playback
muh
7) A & 2
“ | VU J
Operations Display Symbols
— 1
Insert a recorded cassette
tape.
Start viewing the picture.
L 1 .
en 2
== E
Рене TVAV VOLUME —_ |
\
Search forward by briefly
pressing FF.
e To change back to normat
playback, press PLAY.
Search backward by briefly
pressing REW.
eTo change back to nomnal
playback, press PLAY.
View a still picture.
s To continue the normal playback,
press PLAY or PAUSE/STILL.
(Only for NV-SD410B, BL)
View the slow motion
picture,
e To continue the normal playback,
press PLAY.
Stop viewing the picture.
(22)
Other Playback Functions
To obtain High Speed Picture during
Fast Forward or Rewind
Keep FF pressed during fast forward.
Keep REW pressed during rewind.
= =
НЕМ ; FF
\ tg >
To return to a Specified Scene
1 Press RESET to set the counter to 0:00.00.
>
2 After playback, press ZERO STOP in the stop mode.
® The tape will be rewound or fast forwarded to 0:00.00
approximately.
Notes:
e Cue, review or slow playback will be automatically
released after 10 minutes, and still playback after
5 minutes.
ae EN D' mada пыл
— 4141 o E ARIF WANE "e Y +
1. During any playback mode other than normal
playback, the picture may have some nolse bars, the
colour may be unstable, or a black and white picture
may appear.
2. When playing back a tape which was recorded on
another VCH, it may be necessary to adjust the
Tracking Control. in some cases the picture quality
may still be inferior. This is due to limitation of format.
Only for NV-SD260B:
Depending on the connected television, the noise bar may
жи В a Fa EE
das mens a alla m I
LIL YES HAU UU CUE UN [EVIEW DidYLACKR.
JONS
Basic Operat
(23)
Manual Recording
= LL | ==
|
E Operations Display Symbols В
insert a cassette tape.
eif it has already been inserted,
press POWER to tum the VCR on.
Select TV station.
Start recording.
Stop recording.
(24)
To select the Desired Tape Speed
SP gives the best picture quality.
LP gives the longest recording time.
To interrupt Recording
Press PAUSE/STILL during recording.
Press again to continue recording.
PAUSE
ql
To record One TV Programme while
Viewing Another Programme
1 Refer to the manual recording operations steps 1 to 3
(page 24).
2 Select the TV programme on your TV set you wish to
ar mF Fine mA MINT iman
view Ak LL ARA PU 11 LLL Y Ar
To display the Approximate Remaining
Tape Time
1 Select Tape Length from On Screen Display and select
the corresponding cassette tape length. See page 39.
On Screen Display
O
> OO» E
® | Rey ; |
+09» |
HS
STORE ю мого x
\ MENU. rem emo chars J
“4 E-180: For E30, -60, -90, -120 and -180 tapes.
E-195: For E195 tape.
E-240; For E240 tape.
E-260 DM: For E260 and -300 tapes,
2 Press DISPLAY.
J Bi
—Clock-> Counter— Remaining Tape Time —,
e The remaining tape time may not be displayed
correctly depending on the tape used.
Notes:
eWhen a video cassette with a broken off tab is inserted,
the "MX indication will flash to indicate that recording is
not possible.
Elan var pain eu wm в ваз. ПГО a whom wn ar
= LIE CSL VIII IY pause mod E МУН LT aug ICALI CER y
released after 5 minutes and be to the stop mode.
Basic Operations
(25)
(26)
Advanced Operations
Timer Recording
Up to 8 timer programmes can be recorded up to one
month in advance by setting the timer.
Editing
Assembly Editing
This enables you to record a new segment immediately
after a previously recorded segment.
Other Functions
On Screen Display
NTSC Playback
VHS index Search System
Other Automatic Functions
|
Advanced Operations
(27)
Timer Recording
Using On Screen Display
Up to 8 timer programmes can be recorded up to one
month in advance by setting the timer, including weekly
and daily programmes.
Preparations
e[nsert a cassette tape with an intact erasure prevention
tab.
o Confirm that the TV is on and the VCR viewing channel
is selected.
For Example:
Programme position (channel); 2
Date; 27th, October
Starting time; 20:02
Ending time; 21:30
(Present date; 16th, October)
a | +
Follow the operation quide on screen display.
Set each item by using 4 Y <>».
Operatons
AB ls mn BE enn oe PY NATA
DEL DIGTUTMIG пе сле.
sWhen it is Kept pressed, the indication changes
in 30-minute steps.
Set Ending time 21:30”.
Select the desired Tape speed
(SP/LP).
Select POC ON or OFF (———).
On Screen Display
OY O Gi
e During satellite
channel timer
programming, PDC
cannot be set to ON
9 Press STORE.
e For the setting other programmes in
successlon, repeat steps 2-9.
1 0 To activate timer recording, press
TIMER REC.
1 Press MENU, and then select Timer
recording.
Select the unoccupied position.
“an .
Set Date “27/10”.
3 set Programme position (channel)
Weekly Timer Recording
in step 4, seiect the desired day by pressing ¥ or DATE—.
Daily Timer Recording
For this timer function, several groups of days can be
selected.
(A) Daily recording from Monday to Friday.
Daily recording from Monday to Saturday.
(© Daily recording from Sunday to Saturday.
in step 4, select the desired days by pressing Y or
DATE—.
Timer Recording from External Signal
Source
If Timer Recording is performed by a unit connected to the
AV1 or AV2 socket, select the AT or AZ indicator for the
programme position.
A1: Through the AV1 socket.
A2: Through the AV2 socket.
— - a ML A — - = _— - —- - = тон A ao. -
Satellite Channel Programmed
Recording
When selecting the programme posltion (channel), use the
numeric buttons to select a satellite channel,
ват 9:C0)-C9)- Id
saT 19: CO )-CDI-C 2)
On Screen Display
ePDC programming is not possible in conjunction with
satellite programmed recording.
Ee E em ARS
e With some satellite receivers, the power remains off
for several seconds when timer recording commences.
With some satellite receivers, the first several seconds
will not be recorded when the timer recording function
is used. :
In these cases, set the start time about 1 minute
before the published time to avoid missing the start of
the programme.
e With some satellite receivers, the power goes off if the
recording Is stopped while timer recording is still
underway.
Checking a Timer Programme
¢ The VCR must be turned on, or the timer recording
indicator "[]” is lit.
e Confirm that the TV is on and the YCR viewing channel
is selected.
CHECK
Press CHECK. }
* On Screen Display may be Е E rai fg 5 <n
distorted in the PDC recording des Tas e AND Е
standby mode. : ВЛЕВО ЗН Ве:
Nte meras Cas сбое |
| Gt ie |
a _
Cancelling a Timer Programme
e The VCR must be turned on, or the timer recording
indicator *[X" is lit.
eConfirm that the TV is on and the VCR viewing channel
is selected. CHECK
1 Press CHECK. Ш ¡E Name. re. Esc. Sab. > ere
20 B8C2 271% 2608 2135 SP LN
| A" 1647 CS 2 "IET LF
" EY EL "Fr ЧР
у Сел Ви инь A A
Er Ak EL ARA LEIA
programme.
3 Press CANCEL le)
PDC (Programme Delivery Control)
How to use PDC?
(1)
(2)
(3)
(4)
Notes on PDC recording:
(1)
(2)
(3)
(4)
(5)
The VCR detects if broadcast stations transmit PDC
signal or not at the time of “Auto-setup” only, and
stores this information in its memory.
If broadcast stations introduce or discontinue PDC
transmission later on. “Auto-setup” must be carried out.
again to update the VCR's memory.
PDC mode will be automatically set to "ON" when
using *Video Plus+" codes for timer programming, if
the stations have been memorised by the VCR as
having PDC transmission,
PDC mode will be automatically set to “OFF” if the
start time is altered during timer programming.
PDC mode will be automatically set to “-— (no PDC)
when using “Video Plus+" codes for timer
programming, if the stations have not been
memorised by the VCR as having PDC transmission.
PDC mode will be automatically set to “OFF” when
timer programming Is done, for any station, by the
“On-Screen” timer recoraing méeinoa, because he
start time can be entered freely by the user.
To use PDC recording in this case, if the station
transmits PDC signal, set PDC mode to “ON” and
ensure that the start time is set t&o exactly the same as
the published time, e.g. in newspapers, magazines,
etc. If this is not done correctly, recording will not start.
Advanced Operations
PDC recording will start approximately some seconds
before the broadcast programme commences and
may stop some seconds before or afferthe end of the
programme, depending on the controi from the
broadcaster.
Normally programmed timer recording data is
automatically cancelled after recording is completed.
Under the following conditions the programmed timer
recording data will be automatically cancelled at
4 a.m. of the next day.
(a) If PDC signal cannot be detected during PDC
timer recording, the VCR will perform normal timer
recording {without PDC).
(b) If a timer recording is incomplete due to insufficient
tape or cancellation by the user.
(c} If timer recording is still in progress at 4 a.m.
(d) If the broadcaster transmits a PDC signal to
suspend or interrupt the recording.
If these cases. the VCR will remain in the timer
standby condition after timer recordings have been
completed.
If PDC is set to "ON" manually for the station which
does not have PDC transmission, the VCR will
perform normal timer recording (without PDC).
in case of multiple timer programmings, while the VCR
is in timer standby mode the VCR will periodically
check PDC status of the programmed stations with
PDC in turn for any change in the start time of each
programme. But while the VCR is recording a
programme, it can only check the PDC status of that
programme being recorded.
If the actual broadcasting times of timer recordings
overlap (regardless of whether they are PDC-
controlled), the recording that starts first always has
priority, and the recording of the later programme will
start only after the first timer recording has finished.
(29)
(30)
Programming the Video
Diria 1 Diiraef Annan
ID T 1 TUDO AUG
Programming is now easier than ever: simply enter the
PlusCode provided in the programme schedule column
carried by newspapers and magazines.
PlusCodes are numbers which are assigned to each
programme listed in the TV programme schedule carried
in newspapers and TY guides. When these codes are
entered and STORE is pressed, the codes are converted
into the actual programming.
Preparations
elnsert a cassetie tape with an intact erasure prevention
tab.
e Confirm that the TV is on and the VCR viewing channel
is selected.
Operations
1 Press VIDEO PLUS+.
o
Enter a Video PlusCode for the TV
programme to be recorded.
Example: 920216
со
Press STORE.
On Screen Display
STORE
e To extend the ending time or to make any
corrections, use buttons A Y < № ог “и A,
FS EEE MET a
DIA 1 E, UT, UTE.
When programming for the first time using à
Video Plus+ code, "——” wlil appear for the
programme position
because the statlon A
has been manually tuned: es Aa |
In this case, select the | 1
programme position of
your VCR which receives
the TV station you
entered the Video Plus+
PiusCode for at step 2
using button A or Y.
eNext time Video Plus+
PiusCode for this station
is entered, the correct position will appear.
4 Press STORE once more to confirm.
e The VCR will go into timer recording standby
mode.
J
STORE
Note:
The VCR will automatically change to the timer
recording standby mode after about 1 minute, if
STORE is not pressed.
5 When programming two or more
programmes, repeat steps 1—4.
Notes:
® 70 reiease from ihe standby mode, press TIMER HEC.
eWhen the PiusCade is used for programming. the
recording time may be slightly longer than the actual
programme time.
eThe procedures for checking and cancelling a timer
programme are the same as on page 28.
Editing
Assembly Editing
This function can be used to make up an edited tape from
other recordings Or video Sources,
rr ew a BE er Emr wr Era wae Am wr
A new scene can be added to the end of a previous one.
Preparations
Connect a movie camera or another VCR to this VCH as
shown.
eInsert à recorded cassette tape with an intact erasure
prevention tab.
e Select the video source required by pressing “Y Ato
sel Al or A2.
AT: Through AV1 socket.
A: Thrash AV сей
F Ha La) A + Bg [gr yy
Fu Fe PS
TV
POXCR muay voLU<E
5) ©) ÉS
Ga!
AV2 AV
N N Recording VCR
> "
i
x À
Advanced Operations
Operations
ISA С Кл LIS PIE Vi
recording.
Press PAUSE/STILL.
FALSE
SL
©)
Press REC to switch the VCR from the
pause mode to the recording standby
mode. ne
9 O
Start the new recording by pressing
PAUSE/STILL again.
FAUSE-
ST
= lea
©
Press STOP to stop recording.
STOP
CE)
(31)
(32)
Other Functions
on Screen Display
a Fa а, — — чо 8
Press OSD to make the On Screen D
TV screen,
O TV station
Note:
When the item “On screen display” is set to OFF, the On
Screen Display (except for the error message) will not
appear. (See page 38.)
NTSC Playback
Tapes recorded in the NTSC system can be played back
with this VCR via a PAL system TV set.
® The playback picture may roll up or down. [f the TV set is
equipped with a V-HOLD control, it may be possible to
stop the picture movement by adjusting this control.
e Depending on the TV set used. the picture may be in
black and white. However, this is not an indication of a
malfunction.
VHS Index Search System
e o a A EA A E rd ia em aad wm Jo, al al e a
it is very aasy tó Tina the Deginning of each recording,
because a special index signal is recorded at the start of
each recorded segment on the tape.
Recording Index Signals
index signals are recorded in following cases.
=When a recording is started by pressing REC.
s\When REC is pressed during recording.
«When timer recording 15 activated.
For example:
Searching for the 2nd recorded segment in the forward
direction.
Press INDEX »-#i twice during playback or stop mode.
> I
# After finding the specific recorded segment, playback
starts automatically.
eFor the reverse direction, press INDEX «a.
e Up to 20 programmes can be searched for in both
directions.
eWhen the opposite INDEX button is pressed, the number
shall be decreased till 1.
eo The figure on the dispiay is decremented by 1 each time
an index signal is located. Bear in mind that the display
will be decremented in this way even while either INDEX
button is being pressed.
e The INDEX search function can only work correctly, if
the index signals are spaced at least 3 minutes apart in
the SP mode and 5 minutes apart in the LP mode.
Other Automatic Functions
Automatic Playback
When a cassette without an erasure prevention tab is
inserted, the VCR starts playback automatically.
VCH-off Piayback
When the VCR is off, an inserted cassette can be played
back by pressing PLAY.
Automatic Rewinding
When the tape reaches its end during recording {except
for timer recording) or playback. it will automatically be
rewound to the beginning.
Automatic Switching Off and Ejection
When the VCR is switched off, and inserted cassette can
be ejected simply by pressing EJECT. The VCR will eject
the cassette and automatically turn itself off again.
Various Settings
Storing TV Broadcasts into your VCR
The VCR is fitted with its own TV tuner (just like a normal
TV set) and can be pre-set to receive up ta 99 TV
broadcast stations.
Settings Using On Screen Display TT
— MEL _ in = sas us 41 FM I
Seiting the Ciock of your \ VCR
The built-in clock is used to activate the timer for
automatic recording and must be set to the correct time.
Setting the Remote Controller for
Operation of your TV
You can operate some makes of TVs using the supplied
Remote Controller alter ihis setting up.
Various Settings
(33)
(34)
Storing TV Broadcasts into your VCR
introduction
Tha VCR ic filed with ite nwn tunar fin: 18t lika a normal TV
dF TT ea NA E
set) and can be pre-set to receive up to 99 TV broadcast
stations.
When your video cassette recorder is plugged in for the
first time, the Auto setup feature will tune in your channels
automatically.
However, under certain circumstances in some
transmission areas certain channels may not be assigned
a channel name or their normal channel position. If this is
the case they will need to be tuned manually. If Auto setup
is not successful, please follow the steps below.
Preparation
Confirm that the TV is on and the VCR viewing channet is
selected. ны
Manual Tuning Procedure
Follow the operation guide on screen display.
Operations
3 Seiect Tuning.
» J
4 Select Manual.
> (0) 7 с
STORE | a
i 1
io e
5 Select desired Programme
position.
=>
(Y) grise
Mot? a
6 Select the Signal Transmission
Channel (Ch)
if known. Г
I
|
Co 3-Cs)
11se the numeric buttons; -
Example: 33 | = "Рети
eUse A Y to search for \| ас нее —— i
the station if channel! number is not known.
4 Press MENU.
В
RAEN)
2 Select Settings.
E E
7 Press MENU, and then press EXIT.
efiepeat steps 5 to 7 if manual tuning for other
station is required. before pressing EXIT.
Channel Plan
Entering the Station Name
Follow the steps 1 to 4 on page 34.
5
Select the station(s) named
x xx x for which you wish to
setup name.
Establish which channel you are
viewing, by checking
race NET
Newspaper. | 224 Mee Cn
ETOR= | 4 = I
A Highlight the — —
~ TV station name. | |
® =>» 0 | rer |
|
Enter characters into all five
>< kkk positions, from the table
using the arrows and press STORE
after each character. Use blank
space if required, to enter a blank
select the area
between Z and * . |
Press MENU once.
If you wish to change or setup any
other TV station
names, repeat
Changing the Programme
Position
Follow the steps 1 to 4 on page 34, then follow the
example below.
5
Select the station(s) named “BBC1”.
© + ©
STORE
—_———_—_ 3
Select the number location you want
to set'the channel.
| |
| I
| |
i
ED ED | nat TN |
e Use the numeric | =. me 2
buttons. ere |
Example; 1 LA ——
7 Press MENU ER
once. owe
( MEN. )
To amend other programme
positions repeat steps 527.
When correctly tuned your station
list will look like
this. (Channel
information will
vary.)
e This is needed for using Video Plus+
PlusCodes correctly.
9
Steps 548. BRC; 8
Р | + e 8
HELL
Press EXIT.
10
Notes:
Press EXIT.
eWhen channels have been set with manual tuning, the
channel position will need to be entered in the
highlighted box the first time Video Plus+ is used.
® Any channel which receives satellite broadcasts is set
using the special name of “SAT
”. The “SAT >
name should not therefore be changed.
If a channel name is to be changed in order to use that
channel as an ordinary channel instead of receiving the
broadcasts of the satellite channel, first select a setting
mare Haas SDE fAr PQ atallita command lsan? om
Hin LA] 204 в FE 151
AMV IG] LL ICLLN
il ICH Nr Rr Msi JI Pr Wr Er
“Satellite” on the OSD menu “Settings” (see page 17),
and then proceed with Manual Tuning.
Settings
Various
(35)
(36)
Satellite Tuning Manually
This section describes method for tuning VCR to a
satellite receiver which has been added to your system
after Auto setup has been done previously. If AV
connection {connection by means of a 21-pin scart cable)
is used, then this procedure is not necessary.
Preparations
e Confirm that the TV is on and the VCR viewing channel
is selected.
Turn on the VCR.
e Turn on the satellite receiver and select "SKY ONE” or
"SKY NEWS" station.
am ———— SC et,
À
Follow the operation guide on screen display.
Operations
1 Press MENU.
2 Select Settings. On Screen Display
| Toe scenes
A i Sakon Sat
de |
Y) STORE |
Select Manual.
®
>
Select unoccupied Programme
position.
o
6
Select a signal transmission channel
(Ch) on which ___,
satellite broadcasts |
can be viewed. |
9 O + DD | mana
E a = |
Use the numeric buttons. =r mle
Example: 35 (7 ]
or A Y tosearch for satellite : signal,
7 Select the TV station a
name (Name) item. | i
Enter “SAT __”,
8
a)
О + © ® + О
= © |
PRE
FRE | |
e _ ] | == eee
eo“ "Indicates two blank spaces. Enter tha space
to the right of the “7” on the keyboard.
e “SAT” is a special term; use it only when a
satellite receiver is connected.
elf “SAT” 15 already displayed, this step is
unnecessary.
Auto Setup Restart | Shipping Condition
If the VCR is moved to a different TV transmission area, If you want to return the VCR to the factory-preset
you may have lo retune your VCR, Follow the procedure condition, Toliow the procedure bellow.
below, Foliow the steps 1 to 3 on page 34.
Follow the steps 1 to 3 on page 34. 4 Select Shipping condition.
4 Select Auto setup restart. SEEN
On Screen Display a) | малая
AO EROS Ea
=> | $e pong ociosas
ET э * © |
© > / og an | al E
— == es ==
ETRE 12 Pe
STORE EFippirc 5 : 1 Ey _ a dn hae
|
|
' 1: Me |
| SERE nues !
MEND lemas RAZA
— —
| a. m0 = пена |
= | Sons sender i 6 Press STORE again.
OQ
S°CFE
' Note:
EXT ue
| To re-tune VCR, disconnect mains lead and then
| — reconnect mains lead. If VCR is off, turn on the VCR. Auto
| € | setup will start automatically.
Various Settings
(37)
Settings Using On Screen Display
Preparations
® Confirm that the TV is on and the VCR viewing channel
is selected.
e Turn on the VCR.
(38)
VCR functions
WII oLTeCI] LADBPIAaY
i Press MENU, and then select Settings.
> >» ©
2 Select VCR functions
3 Select On screen display.
@ | =
9 |
4 Select ON or OFF.
© ©
ON: The On Screen Display will appear on the TV
screen by pressing OSD. a
OFF: The On Screen Display will not appear even if
OSD is pressed,
To select the Corresponding Cassette
Tape Length for Displaying the
Ñan Vir AA rra arar UT ara Tim e
ApPproxXimas Cai Ey dpt E EII
1 Select Tape Length.
—
i DZ Kae per DEF
Tapa Lie - 1E- HE
AZ Toreo CECODE
= charge
TORE Treen L
\ MESU ae = vin "e j
2 Select the corresponding cassette tape length.
© ®
rl :
SCRE ave marges |
MEAL" EA CERA ;
« E-180: For E30, -60, -90, -120 and -180 tapes.
E-195: For E195 tape.
E-240: For E240 tape.
E-260 PF: For E260 and -300 tapes.
—— ==
y
|
+ aM |
HC !
AV? Connection
1 Select AY? Connection.
| era Tera ЕЕ
A i eg E i
: A 72 Connie © DECODER |
Y) |
ro e CADA 1
| =- Fi ce |
1 = CRE Ms tha -oet +
LEA a Topes !
2 Select VCR/SAT or DECODER.
— — Tee „EM
ra "a AE CONTE. ET - YC.
fd >
i
_
+ a Je 1
1 ed |
| 573A E) Choma Fg nog 1
Lo ea TI + J
VCR/SAT: When another VCR or the satellite
receiver is connected to the AV2 socket.
DECODER: When the decoder is connecied to the
AY? socket.
If Satellite Connection is set to AV2 (See page 17),
AV2 Connection is set to VCR/SAT automatically.
After All Settings are selected
Press STORE, and then press EXIT to make On Screen
Display disappear.
q > 5
Various Settings
(39)
(40)
Setting the Clock of your VCR
The built-in clock is used to activate the timer for
automatic recording and must be set to the correct time.
The built-in digital clock employs the 24-hour system.
If VCR is not correctly set by Auto setup. follow the
procedure below.
Preparations
eConfirm that the TY is on and the VCR viewing channel
is selected.
e Turn on the VCR.
__)
Manual Clock Setting
Follow the operation guide on screen display.
Operations
"ad
tk
Set Month (M).
4 Press MENU, and then select
« Setiings.
2 Select Clock.
Select Manual setting.
a WwW
Set Time (H/M).
*When it is kept pressed. the indication changes in
30-minute steps.
Set Year (Y).
~ | | YI
8 Press STORE.
® The clock will start.
(MN Press EXIT.
ud
Automatic Clock Setting
Follow steps 1 to 2 of the above procedure.
3 Select Automatic setting.
4 Press STORE
a The ciock is set automatically.
Notes:
eThe clock operates for at least 60 minutes by its backup
system in the event of power failure.
e When the item “Automatic clock-set is” is ON, on the
on screen display, Automatic time correcting function is
activated.
The Automatic time correcting function will only work
when the VCR is in standby. This function will not work
during timer recording standby mode.
Setting the Remote Controller for Operation of
your TV
You can operate some TV manufacturers (see next page) Preparation
using the supplied Remate Controller after this setting up. install the batteries in the remote controller. See page 7.
Operations
Turn on the TV.
Press corresponding operation button
to your TV manufacturer (see next
page) while keeping TY SELECT
pressed.
elf setting is correct, TV will be tumed off
automatically,
№ | —
Note:
Some TV models cannot be operated using this remote
controller.
Various Settings
(41)
(42)
TV Manufacturer Operation Button
- TV SELECT
O + 17
TV SELECT
OO + x
Panasonic Y SELECT DATE
O + [*
TV SELECT DATE
GRUNDIG, Blaupunkt,
SIEMENS
O
AL
PHILIPS, LOEWE, SAMSUNG,
RADIOLA, DUAL, PYE, BUSH,
GOODMANS, ELEMIS, CURTIS,
2
©
3
O
O
Z
a
SBR
TV SELECT OFF
SONY | + |
TV SELECT OFF
METZ
О
FERGUSON, THOMSON,
TELEFUNKEN, GOODMANS,
SABA
CC
FERGUSON, THOMSON,
TELEFUNKEN, GOODMANS
©)
pm
m
o
^
*
О
FERGUSON, THOMSON,
TV SELECT CANCEL »
TELEFUNKEN, GOODMANS, (N CY)
TV SELECT TIMER REC =
FERGUSON, TELEFUNKEN,
GOODMANS, SABA
О
TELEFUNKEN
2
a
a
5
CNC
+
FERGUSON, THOMSON,
TELEFUNKEN, GOODMANS,
2
@
q
O
В
O
SABA
FERGUSON, THOMSON, TV SELECT means
TELEFUNKEN, GOODMANS, SABA, ()
NORDMENDE, BRANDT
TV SELECT
HITACHI
Tv SELECT
O
TV SELECT
SIEMENS Ca)
Ty SELECT
SAMSUNG
ITT. NOKIA, SELECO +
+
NOKIA, SALORA O)
N m *
O
un
de
oJ
J»
+
3
3
JVC +
SHARP | +
<
4
q
O
MITSUBISHI
TY SELECT .
TELEFUNKEN ( ) + J
EXIT
When the TY manufacturer is Panasonic or HITACHI:
When the TV's power is tumed off in step à on the
previous page, tum It back on and adjust the TV's volume
using this remots controller. The volume can be adjusted if
the operation button matches the TV manufacturer.
1 i in ima A da Fra ds da a Es TUE A AAA
F1 a is no PL DHL гл GOJUII MID FY OO WIFI, try +" essi Fu
the other operation button to match the TV manufacturer
again until the volume can be adjusted.
“When the TV manutacturer is FERGUSON,
THOMSON, TELEFUNKEN, GOODMANS, SABA,
NORDMENDE or BRANDT:
How to change the programme position of TV:
1 Press A (TV) lo make POS appear on screen display.
2 Press VOLUME + or —.
eTa adjust the TV's volume using the remote controller
aa r Him ra и dm em La TRAE mas ear rima =
CATA Li al, +1 La FN CT 1 Y) LLF EFFES I Wil WIT OED | LAIA Ия ay
disappear and then adjust the volume. For some
models, POS disappears automatically after several
seconds. In these cases, this operation № not necessary.
Note:
SIEMENS, SAMSUNG, NOKIA, FERGUSON,
THOMSON, TELEFUNKEN, GOODMANS and SABA
have plural operation buttons. Although some models may
operate with any of these operation buttons, other models
may operate with only one operation button. Check each
operation button in tum, and set the optimal operation
Le wm
EILItLLA 1.
Before Requesting Service
Before requesting service, check the following points once
agaln.
Precautions
Please read these cautions before you operate this VCR.
Ta
Specifications
Helpful Hints
(43)
(44)
Before Requesting Service
Before requesting service, check the following points once again.
|
| : — Message of On Screen Display is displayed.
|
This action is no! possible VIDEO PLUS+ is pressed Set date and time.
: before time and date is set | when date and time is not set.
REC, PLAY, FF or REW is Insert a video cassette.
Please insert d wh Hei
Video tape pressed when no cassette in
the VCR.
Please use REC is pressed without tab Use a cassette with tab.
unprotected tape of Cassette.
LL = =
This VCR has a self-diagnosis and display function. If the VCR detects troubie during installation or during use, the following
indications automatically appear in the VCR display. Indications are displayed in the form of a single English letter plus two
numbers such as [HO1].
М
|
tu |
I
|
HOT i Some trouble has occurred. Consult your dealer for further advice.
(Numbers tollowing Hand F
differ according to the status
of the VCR.)
FOO
. VCR will not operate correctly
En | CAUSE | REMEDY . CHECKED
| VCR display is not | Mains lead is not connected. Reconnect mains lead to VCR.
: Hluminated. ;
VCR display is VCR is in timer mode, Press TIMER REC to operate VCR manually.
illuminated but VCR
will not operate, Safety devices are operating. Disconnect mains lead and wait for 1 minute.
| " Reconnect mains supply and check functions.
; |
| - Condensation may have Do not operate VCR for 1 hour. :
| formed |
я - The satellite receiver cannot be controlled correctly
Ч = — " — |
— PTOM ! CAUSE REMEDY ! CHECKED
The Satellite The Satellite Receiver is not Connect the Satellite Receiver correctly.
Receiver cannot be connected correctly to the See page 14.
controlled. VCR.
|
The settings on page 17 for ‘ Perform the settings on page 17-19 and 36 again |
receiving satellite broadcasts ¡ correctly.
"are not correct.
|
Playback will not operate correctly |
CAUSE REMEDY CHECKED
o a = um
Picture noisy or not
in colour.
Horizontal bars or
lines run down the
screen.
. Tracking is not correct.
Adjust the tracking. See page 6.
TV set is not tuned to VCR.
Operate RF OFF/TEST SIGNAL on VCR and check
TV tuning. See page 15.
Video heads are clogged or
worn.
i Consult your dealer for further advice.
| Head cleaning by service agent is not covered by
— warranty.
pful Hints
Hel,
(43)
(46)
= =-— — > ToT Tae == —=o a rr ow TE НН E -
E CE an - med oo e e,
CAUSE
E =
REMEDY i -
‘Bl indication
flashes whenever
recording is
attempted.
Erasure prevention tab on
: cassette is broken off.
Use tape with intact erasure prevention tab, or cover
tab hole with adhesive tape, if original recording is
no longer required.
Picture is recorded
with noise or blank
screen.
Aerial or aerial lead is
defective.
Check aerial connection to VCR. See page 12.
Check your normal TV picture. if there is no picture,
check your aerial.
VCR is not correctly tuned.
Re-tune VCR. See pages 34-37.
Al or AZ is selected.
Select the required TV programme.
Timer recording
Clock or calendar is
Check clock and calendar. Set to present time.
recordings cannot
be made.
cannot be incorrectly set. (Note this is a 24 hour ciock.) See page 40.
performed.
Recording start or end time Set recording start and end time correctiy.
setting is incorrect.
VCR ie na + fr or timar Drace TIMER BES aftar nrnnramrin;a far timar
Y ."i E 1 Da La {! buses В Жил ыыы Ш в Tm a ЯР Ъ ый rt ry EY ir uf TA НТ Ея
record ing. recording.
AV external A1 or AZ is not selected.
Select A1 or A2 by pressing INPUT SELECT.
External AV connections are
: incorrect.
Check that connections for external video and audio
source are correct. See page 31.
Remote controtièr win not Wo
ao
=Tixes PEE:
CAUSE
Remote controller
does not operate
correctly.
Remote controller transmitter
beam is not reaching VCR.
Ensure that remote controlier is being pointed at
VCR and that transmitter beam is not obstructed.
Distance is too far.
Use remote controller within 7 m of VCR. If this
range is not possible, replace batteries.
Batteries are exhausted.
Replace batteries. Nolte precaution for replacement
on page 7.
Batteries are incorrectiy fitted
. Larriba FLY reverand]
- ТИ земли,
Fit batteries correctly as shown on page 7.
Precautions
Please read these cautions before you operate this VCR.
Avold Sudden Changes in Temperature
If the VCR is suddenly moved from a cold place to a warm
place, condensation may form on the tape and inside the
VCR.
Humidity and Dust
Avoid places where there is high humidity or much dust,
which may cause damage to internal parts.
Do Not Obstruct the Ventilation Holes
The ventilation hotles prevent abnormal increases in
temperature. Do not block or cover these holes. Especially
avoid covering the holes with soft materials such as cloth
or paper.
Keep away from High Temperature
Keep the YCR away from extreme direct heat such as
direct sunlight, heating radiators, or closed automobiles.
Keep Magnets away
Never bring a magnet or magnetized object near the VCR
Marca rca iF will а йа геев = РНР Ва оны Ву гг а ий Ha
AAACN LL FV I CAAA Vd ir ly CRE Ii bt LP A FA TT IGA Fuhr Wi Al
VCR.
No Fingers or Other Objects Inside
Touching internal parts of this VCR is dangerous, and may
cause serious damage to the VCR. Do not attempt to
disassemble the VCR. There are no user serviceable
parts inside.
Keep Water away
Keep the VCR away from flower vases, tubs, sinks, etc.
CAUTION: If liquids are spilled into the VCR, serious
damage could occur. If you spill any liguid into the VCR,
consult qualified service personnel.
Cleaning the VCR
Wipe the VCR with a clean, dry cloth. Never use cleaning
fluid, or other chemicals. Do not use compressed air to
remove dust.
Stacking
Fiace the VCH in a horizontal position, and do not place
anything heavy on it.
Video Head Clogging
The video heads place picture signals on the tape during
recording and read picture signals from the tape during
playback and they are, therefore, of critical importance for
the picture quality. If the VCR is used aver extremely long
periods of time, these heads may become dirty and
clogged. In such a case, the signals can no longer be
recorded correctly. and the playback picture will be
distorted accordingly. This is the case, for example. during
the playback of a tape, the sound is reproduced normally,
but no picture is seen. or the picture is greatly distorted.
When such a symptom case occurs have the recorder
checked by qualified service personnel.
Head cleaning by service agent is not covered
by warranty.
Condensation may form in the VCR if:
ee The VCR is in a room where the heater has just been
turned on.
e The VCR is in a room with steam or high humidity.
e The VCR is brought from cold surroundings into a well-
heated room.
eo The VCR is suddenly brought from cool surroundings,
such as an air-conditioned room or car, to a place which
is hot and humid.
Note:
Do not operate the VCR for at least 1 hour if any of the
above conditions occur.
This VCR does not incorporate a dew sensor.
Tape Care
Some do's and don'ts on tape care.
DO:
1) Use a good quality branded tape, such as Panasonic.
2) Keep in the Box supplied with your tape, or a video
case, when not in use.
3) Try to use all the tape on a cassette by making
recordings not only at the tape start but also in the
middle and end sections. This will avoid many
repeated recordings at the beginning of the tape
resulting in premature wear.
4) Take care to insert a tape correctiy into the VCR to
avoid damage.
DO NOT:
1) Expose the tape to high humidity or temperature.
2) Expose to liquid.
3) Expose to dust particles by storing directly on a carpet
for example.
4) Use a damaged tape or attempt to repair.
5) Dismantle the cassette housing.
6) Attempt to lift the front cassette flap or touch the tape
surface.
—- -_ -_ A A nA Ee Tt
Helpful Hints
(47)
Specifications
NV-5D260B...(U.K. model)
NV-SDA10B...(U.K. model), BL...(EIRE model)
eE
Power Source:
Power Consumption:
+ see
Tape Speed:
Tape Format:
Record/Playback Time:
VIDEO
Television System:
Modulation System:
Input Level:
Output Level:
AUDIO
input Level:
Output Level:
Audio Track:
Video Horizontal Resolution:
Signal-to-Nolse Ratio:
Audio Frequency Response:
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
Standard Accessories:
220-240 V AC 50/60 Hz
19 watts
ARERR INANE
2 rotary heads, helical scanning system
2 heads (NV-5D260B)
4 heads (NV-5D4108, BL)
SP; 23.39 mm/sec.
LP; 11.7 mm/sec.
VHS tape
SP; 240 min. with NV-E240
LP; 480 min. with NV-E240
CCIR; 625 lines, 50 fieids, PAL colour signal
Luminance; FM azimuth recording
Colour signal; converted subcarrier phase shift recording
AV1/AV2: 1.0 Vp-p.
AV1/AV2; 1.0 Vp-p,
RF Modulated; UHF channel! 36 (+6),
AV1/AV2; more than —6 dBV,
AV1/AV2; —6 dBY,
{ track (Normal-mono only)
Colour; more than 240 lines
Video; more than 43 dB (SP)
Audio; more than 43 dB (SP)
80 Hz—10 kHz
5°C-40°C
35%-80%
4.2 kg
430 (W)x989.9 (H) x293 (D) mm
1 pc. RF Coaxial Cable
1 pc. Remote Controller
2 pcs. “RE” size batteries
1 pc. AC Mains Lead
Weight and dimensions shown are approximate.
Specifications are subiect to change without notice.
E
VQT6593-1
707
75 ohm, terminated
75 ohm, terminated
75 ohm
more than 10 kohm
1 kohm
Matsushita Electric Industrial Co., Ltd
TU —— — apm ==
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement