Panasonic NVSD400 Operating Instructions

Panasonic NVSD400 Operating Instructions
 Е Tree nC =
Be clad EES RS —=
Le ~ Video Cassette Recorder _
NV-SD400 и.
Operating Instruction
SHE
Err om
ir
m === —
e a
A ===" 7
EMEA
wv ely SA
EL
PE
cr
==
ct.
_— ee =
gad these instructions complete, —_—_—_—
a
== Fi sae ARE se Drogue please
Г
I=
Fess
LAA Anta A
operate or adiust this
Dear Customer
May we take this opportunity to thank you for purchasing Video Plus+ Programming System
this Panasonic Video Cassette Recorder. Programming is now easier than ever: simply enter the
We would particularly advise that you carefully study the PiusCode provided in ihe programme schedule column
Operating Instructions before attempting to operate the carried by newspapers and magazines.
unit and that you note the listed precautions. Video Plus+ and PlusCode are trademarks of Gemstar
Development Corp. Video Plus+ system is
Auto Setup manufactured under license from Gemstar Development
7 re 7 =” — SET a Corporation.
( (Soo pas Mee lead and the mains lead. В С rystal View Control
e _ ____ Introducing Crystal View Control. and innovative new_____
technology for high picture quality. This technology uses
an microprocessor to intelligentiy contro! the relationship
f between the tane heads and circuitry, bringing out the
Turn on the VCR. | maximum performance of each. The result is consistently
optimum picture quality.
wet?
Auto Setup is finished. e FÁQ (High Quality) Picture System
Video recorders carrying the HQ symbol mark feature the
new VHS High Quality Picture System. This system
assurgs complete compatibility with VCRs that use the
conventional VHS system.
IMPORTANT
Your aitention is drawn to the fact thai
the recording of pre-recorded tapes or
discs or other published or broadcast
material may infringe copyright laws.
WARNING
TO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN CR
MOISTURE.
FOR YOUR SAFETY
Ш DO NOT REMOVE OUTER COVER.
To prevent electric shock, do not remove
cover. No user serviceable parts inside. Refer
servicing to qualified service personnel.
AA PE fray
SE EEES e SE Bil RERO RE ER EME EE
daa BW NI ii
Contents
Connections .......100 444 ea La LL LL 11220000 8
Tuning the TV to your YCR .................. 10
Auto Setup ......... — reee. N 11
Infra-red Remote Controller .................. 12
Controls and Connection Sockets ............ 14
Playback RR 18
Manual Recording . . .. ......._ .............. 20
Timer Recording ........................... 24
Using On Screen Display .................... 24
Programming the Video Plus+ PlusCode ....... 26
Editing .................. reaver em RE
eAssembiy Editing ...... aL. 27
Other Functions ........................... 28 —
Various Settings
Storing TY Broadcasts into your VCR .......... 30
Settings Using On Screen Display ............ 32
Setting the Remote Controller
for Operation of your TV ................... 34
Setting the Clock ofyour VCR... .........c..... 36 e
RESTE a Ti €
Before Requesting Service .................C 38
Precautions .........................« xi: 41
Specifications Lo... 42
Caution for AC Mains Lead
4
ne
*
E
7
MR wy kd
Is ins en
CL har ре
МС
m TH i LA el
, ë
Ae hes ETA
A ni И
aa |]
gh a
PA a Et Lens
Me
eS
4
Hid gop
ia
ea A,
mr me mm = - -. = a 2 таща «в
For vour cafetv nlease read the following text
carefully
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5 amps and
that it is approved by ASTA or BS! to BS 1362.
Check for the ASTA mark @> or the BSI mark Q on
the body of the fuse.
If the plug contains a removable fuse cover you must
ancre that + ice raoféHtatl ahoan fhe fica io ranlarnesrd
WDA LI ECAR DA [e TOA WHI | UW TLDS BT pri A,
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG 1S UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE
PLUG CUT OFF AND DISPOSED OF SAFELY. ~~
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED
ТАГИ АКТ Я) АКЯГУ СИ ИИ
HN IW MINT JD РАО ИЯ 1
If a new plug is to be fitted please observe the wiring
code as shown below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
Biue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
appliance may not correspond win ine coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal in the plug which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal in the plug which is marked
with the letter L ar coloured RED.
Under no circumstance should either of these wires
be connected to the earth terminal of the three pin
plug, marked with the letter E or the Earth Symbol
1.
ай учла + a win nud on
PIQUE AU CHIGLC
e There ara two types of the AC Mains Lead
assembly: @ and & as shown below.
1 Open the fuse compartment with a screwdriver.
2 Replace the fuse and fuse cover.
ТУРЕ ®
|
| i all
A EG JT Ica ENG II GRR REA" EM 0 8 | MUI ACME 14€ DOCE TI td RC
Caution for AC Mains Lead
Unpacki ng Unpacking
Check and identify the supplied accessories, and then set up this VCR after reading
“Setting up”.
Eo
7
— | |
COCO 5 |
ere — TELL
a = fe — - Sem ран ОНИ mr ye aa ETA В
RF coaxial cable for Batteries for the Remote controller a
connecting between this remote controller (1 pc.)
VCRand a TV (1 pc.) (2 pcs.) VEQ1657
VJA0710-1 or VJA0728 UM3 or R6 type
оо
о ©
OUD
обр
АС mains [ead (1 pc.)
VJA0733 STN
|
|
0
Qu
OC
О ©
ap
a
Setting Up
etting Up
mm a Lm Tara LL eT]
Connections
This tells vou how to connect with an aerial, TY, etc.
Tuning the TV to your VCR |
The VCR supplies a signal to the TY set via the RF
coaxial cable on channel 36 of the UK broadcasting
system. Your TY must be tuned into this channel in order
to view the VCR playback picture.
If the connection to the TV includes the 21-pin scart
cable, the playback picture can be viewed by selecting
AV on your TV. The HF coaxial cable must still be
connected as shown on page 8, but the TV need not be
tuned to channel 36.
~ BEE ET PILI. ET
Auto Setup |
When the VCR is turned on after connecting the aerial
lead and the mains lead, Auto setup (Auto tuning and
Auto clock setting) starts.
Controls and Connection Sockets
This gives a detailed explanation of the function of each =
button, switch and connection socket.
Connections
This tells you how to connect with an aerial, TV, etc.
Basic Connections
The following connections are required to record and play
back the VCR through TV set: o
Aerial TV Set (Not supplied)
Ta Th HR TE TR RW WY
(Not supplied)
Aerial Connector
| Е й
TG Mains supply
Connection to a TV Set with 21-Pin Scart Terminal
Aerial TV Set (Not supplied)
(Not supplied) Aerial Connector =
2
1 21-Pin Scart Terminal
_ a
Note:
RF OFF/TEST SIGNAL SWITCH
Switch to “OFF position only if interference beat occurs,
then viewing via 21-pin scart connetion only.
To mains supply
Connections
Connection to a Satellite Receiver
oe By means of 21-pin Scart Cable
Asrlal
(Not supplied)
Aerial Connector
TV Se
[lm
t (Not supplied)
— he.
Satellite Receiver (Not supplied)
21-Pin Scart Terminal
21-Pin Scart
Terminal
—
==
4
>
—— —
To mains supply
Note:
"RGB" is an abbreviation for “RED/GREEN/BLUE”
signals. If the TV with RGB input capability is connected
to AV1 and the unit with RGB output capability is
connected to AV2, the TV can receive RGB signal from
the unit through the VCR.
e By means of RF Coaxial Cable
Aerlal
“(Not supplied)
Satellite Receiver (Not supplied)
N
RF IN RF OUT
e Use full-.wired 21-pin AV cables for the connection.
e Selection of RGB or normal video output is done by the
external equipment connected to AY? terminal.
"Note:
AF OFF/TEST SIGNAL SWITCH
Switch to “OFF” position only if interference beat occurs,
then viewing via 21-pin scart connetion only.
TV Set (Not supplied)
L
~~
|
=]
Aerial Connector
(Gooncosgea Ÿ i
ighaagacocozo: >
J]
гр ; El
A
NEAROJOCICE no '
2026009 | |
lr
a |
Note:
RF output channel of the satellite receiver should be
adjusted away from channel 36, which is used by the
VCR, E.G. re-adjust to channel 38.
Also select "SKY ONE” or "SKY NEWS” on the satellite
receiver to ensure reliable tuning before starting the Auto
Setup.
Setting Up
10
Tuning the TV to your VCR
D.
;
A E AAA AE rE RE EE Ao maa =
Iti is possible to view the video picture on your TV in 1the
same way that you watch TV broadcasts.
H you have connected the VCR to the ТУ through the
procedure mentioned below.
Preparation
e Tur on the TV.
» Refer to the operating instruction of the TV set and carry
out tuning/preset procedure.
Operations
§ a Turn on the VCR.
2 RF on To generate a test pattern, set RF OFF/
orF[_LITEST SIGNAL TEST SIGNAL to TEST SIGNAL ON.
wp
Ww
y
(During Auto setup) (After Auto Setup)
4 ВЕ ON — Le meme
OFF CO JTEST SIGNAL
OFF —
=
Set the TV to an unused position which
you wish | to use for your video playback.
eOn Panasonic TV the programme number O should be
selected to obtain best performance.
eWhen the VCR is turned on after connecting the aerial
lead and the mains lead, Auto setup (Auto tuning and
Auto ciock setting) starts. (See next page.)
Set RF OFF/TEST SIGNAL to TEST
SIGNAL OFF.
Note:
The test signal is transmitted on channel 36 of the UK
broadcasting channels. If you are encountering
interference from another broadcast on the video
channel, you may readjust to a free channel (30—42) by
using the CH ADJ. screw which is located on the rear of
the VCR.
Please note that if the CH ADJ. screw 15 used then you
will have to retune your TV to the test signal as in item 2
to À above.
TE TE
Auto Setup
Tuning the TV to your VCH
Auto Setup
Auto Setup
When the VCR is turned on after connecting the aerial
lead and the mains lead, Auto setup (Auto tuning and
Auto clock setting) starts.
On Screen Display
: |
i AACHEN I Par -
| a al
- EN ren .
' - 1
| ee == ;
[E ——
eo The Auto setup is searching for TV station from
minimum to maximum and memorizing the data for
every programme position.
e The Auto setup takes two or more minutes to complete
the search for TV station and the clock setting. _
elf the clock setting screen appears after auto setup has
been completed, refer to page 36 and proceed with the
setting.
Note:
If VCR is not correctly set by Auto setup, see Various
settings on pages su, 51 ana Jo.
Viewing the TV station list
Preparations
as refi that than TU 18 na arma? da WT CIMA Carnal
AFA LE ACA UIE 4 OY 10 VII OU LIA Y NATI VIS NME ERA OT OUI ing
is selected.
e Turn on the VCR.
1 Press MENU.
AONE SLT]
i
= т TT -
DRE Es
LOU Save rats o
2 Select Statlon list.
@ | |
wp œ | EpPrze |
Y) STE | |
3 Select the desired TV station, if you want to view the
broadcast.
i Fou Mea Th Fos Kame Th
1 ESCH 22 1 CM se |
y = = x3 12 MN == °
\ 3 mA м 5 sex E,
a Cha 25 14 POSTA "e |
a S425 = = РЕ ТЕ E
ml (_J & CHARME 21 5 FOSIE es |
> Crane =r нон.
== P C-HAME 1 QE === ое
. Y STORE = Can 2 jo ====- == |
17 SAT = #5 -==== sn
I 15. neha] posilor |
1 572 A MP MATE ara a ———]]; I
LE TS AI
|
Setting Up
11
12
Y 16
15
| 1a
I 13
“1 12
7
VAN
a
WN =
ANA
5 x SE
pa
O
NNN
``]
“
с
1 POWER (TV)
To switch the TV from on to standby mode or vice
versa. In standby mode, the TV is still connected to
the mains.
e With some TV models, it may only be possible to
switch the TV to standby mode using this button.
In this case, use TV/AV or Y A (TV) to switch thé
TV on.
2 TV/AYV
To select the TV input.
3 POWER (VCR)
To switch the VCR from on to standby mode or vice
versa. in standby mode, the VCR is still connected to
the mains.
4 osp
For the On Screen Display Function.
5 REW (REWIND)
In the stop mode: To rewind the tape.
In the playback mode: To search backward.
In the rewind mode: To obtain high speed picture.
“<1” is lit.
6 PLAY
To start playback. “>” is lit.
No function
function
25
26
27
28
7 PAUSE/STILL
During playback: Still picture.
During recording: To interrupt recording.
REC
To start a recording.
e Press both buttons simultaneously.
9 vv A (VCR)
To select the required programme position (TV
station) of the VCR.
a
10 TRACKING/V-LOCK
To adjust the tracking and the vertical locking.
(See page 19.)
11 SLOW
ror the Siow motion DiayDack function. “DD>" is I.
12 FF (FAST FORWARD)
In the stop mode: To fast forward the tape.
In the playback mode: To search fonward.
In the fast forward mode: To obtain high speed
picture.
“Tis Ш,
13 STOP
To stop any playback or recording.
14 INDEX
For the index search function.
Infra-red Remote Controller
15 vv A (TV)
To select the required programme position {TV
station) of the TV,
Tari AE
IU VOLUME
To adjust the volume of the TV.
17 Infra-red Transmitter
The programming data are transmitted from here to
the VCH.
18 VA
To programme a timer recording.
19 DATE
To programme a timer recording.
20 DISPLAY
To change the indication on the VCR Display.
—> Clock-> Counter Remaining Tape Time-——
21 RESET
To reset the tape counter (elapsed time) to "0:00.00",
eThe tape counter is automatically reset to “0:00.00”
when a video cassette is inserted,
22 CHECK
To set and check timer programmes.
23 ZERO STOP
For the zero stop function,
24 CANCEL
To cancel the settings made for a timer recording.
25 INPUT SELECT
To select the A1 or A2 external recording source.
26 RECORDING SP/LP
To select the tape speed desired for recording.
SP gives the best picture quality.
LP gives the longest recording time.
27 TY SELECT
To set the remote controller for operation of the TV.
28 EXIT
To make On Screen Display disappear on the TV
screen.
29 STORE
To make selections from On Screen Display.
30 4 Y <>
To make selections fram On Screen Display.
31 MENU
To make On Screen Display Main Menu appear on
the TV screen.
32 Programme Position Selector Buttons
eo To select the programme positions (1-99).
0: CD
19: —CT)-—C9) -
#To enter a PlusCode.
‘Setting Up
33 VIDEO PLUS+
For programming the Video Plus+ PlusCode.
34 TIMER REC
To turn the timer recording functio
[is lit or not lit.
Once operating timer recording function, the normal
VCR operation is not possible unless this button is
set to off.
35 OFF
e To programme a timer recording.
eTo set the manufacturer number of the TV.
36 ON
To programme a timer recording.
„= ко mam od m FE
LIT aria Wi.
Power Source for the Remote Controller
"R&" size batteries. The life of the batteries is about one
year, although this depends on the frequency of use.
Precautions for Battery Replacement
eo oad the new batteries with their polarity (= and >)
aligned correctly.
eDo not apply heat to the batteries, or an internal
short-circuit may occur.
ef you do not intend to use the remote controller for a
long period of time, remove the batteries and store them
in a cool and dry place.
e Remove spent batterres immediately and dispose of
them.
e Do not use an old and a new battery together, and
never use an alkaline battery witn a manganese battery.
Installing the Batteries
13
14
Controls and Connection Sockets |
This gives a detailed explanation of the function of each button, switch and connection socket.
о се ©
о ©
“об ее <
Cassette Compartment
Insert a video cassette here.
VA
To select the required programme position (TV
station).
REC
To start a recording.
PAUSE/STILL
During playback: Still picture.
During recording: To interrupt recording.
REW (REWIND)
In the stop mode: To rewind the tape.
In the playback mode: To search backward.
in the rewind mode: To obtain high speed picture.
“<<” is lit.
PLAY
To start piayback. “I>" is lit.
FF (FAST FORWARD)
In the stop mode: To fast forward the tape.
In the playback mode: To search forward.
In the fast forward mode: To obtain high speed
picture.
“>[>" is lit.
STOP
To stop any playback or recording.
POWER OA
Press to switch the unit from on to standby mode or
vice versa. in standby mode, the unit is still
connected to the mains.
1411516
OO EJECT
To eject a video cassette.
O Standby indicator
This indicator is lit when the VCR is turned off or the
VCH is timer recording standby mode.
"(D Infra-red Remote Control Receiver Window’
® Display
EU) Cvc indicator
When the CYC function is on, this indicator is lit.
(E Cvc (Crystal View Control)
ON: — Using the CYC function, piayback is
performed in the state which achieves
optimum picture quality in light of
characteristics of a tape.
ee The CVC indicator is fit.
* This control should normaly be left in the
ON position.
OFF: Turn off the CVC function.
eo The CVC indicator is not kt.
eWin certain tapes, the OFF position may
resuit in a better picture.
TIMER REC
To turn the timer recording function on and off.
A] is lit or not ft.
Once operating timer recording function. the normal
VCR operation is not possible unless this button is
set to off.
©
Controls and Connection Sockets
4) RFIN
o ©
To connect to the external aerial.
CH ADJ.
To adjust the RF transmitting channel 30-42.
RF OFF/TEST SIGNAL
RF OFF: Set to this position when the VCR is
connected to the TV via the 21-pin scart
cable.
TEST SIGNAL OFF;
Set to this position when the VCR is
connected to the TV via the RF coaxial
cable only,
TEST SIGNAL ON:
Set to this position when tuning the TV into
the VCR.
The test signal is transmitted on
channel 36 initially.
AV1
This 21-pin scart terminal carries input and output
signals for both picture and sound. TV sets equipped
with a similar socket can be connected here.
This is aiso called Scart
Peritel
Euro Connector
Euro AV
oa, AY
ear SPaHAL
OFF
©
25 “E E 12 12 “1 E в 52
TL ML LL
rss fafkErcoqaqFErED
: = JI LL
= SPORE Lire hres .
1 ah
19 17 158 1% 11 9 7 E Sd
1 AUDIO OUTPUT 13 RED GROUND
2 AUDIO INPUT 14 BLANKING
3 AUDIO OUTPUT GROUND
4 AUDIO GROUND 15 RED
5 BLUE GROUND — 16 BLANKING
6 AUDIO INPUT 17 VIDEO OUTPUT
7 BLUE GROUND
8 SWITCHING VOLTAGE 18 VIDEQ INPUT
9 GREEN GROUND GROUND
10 No connection 19 VIDEO OUTPUT
11 GREEN 20 VIDEO INPUT
12 No connection 21 GROUND
Note: RED, GREEN and BLUE are inputs only.
AC IN—
To connect to the main power supply.
RF OUT
To connect to the aerial terminal on a TV set.
АМ2
To connect to a decoder or another VCR.
e Only used as the input socket.
e The 21 pín list is same with AV 1.
Setting Up
15
16
Basic Operations
Playback
‘ Manual Recording |
Basic Opera tions
17
1 54273
Operations Display Symbois
a 2 =
2
PLAY Start viewing the picture.
(power A =
Search forward by briefly
pressing FF.
e To change back to normal
playback, press PLAY.
insert a recorded cassette
tape.
O Di
5
pi
№
Search backward by briefly
pressing REW.
#70 change back to normal
playback, press PLAY.
e
View a still picture.
e To continue the normal playback,
press PLAY or PAUSE/STILL.
PAUSE/
gone um.
Li ia
View the siow motion
picture.
e To continue the normal playback,
press PLAY.
E
a
LU PUS
г
|
7 (stop Stop viewing the picture.
va
Playback
Other Playback Functions
To obtain High Speed Picture during
Fast Forward or Rewind
Keep FF pressed during fast forward,
Keep REW pressed during rewind.
To return to a Specified Scene
1 Press RESET to set the counter to 0:00.00.
2 After playback, press ZERQ STOP in the stop made.
e The tape will be rewound or fast forwarded to 0:00.00
approximately.
To find the Beginning of Each Recording
Recording Index Signals
Indav ennale ara racardan in fallmanna racae
EL LAME ыы Li [EE AI TA A a Al ый ll FE EE 1 т a" Erik ый a
eWhen a recording is started by pressing REC.
ewWhen REC is pressed during recording.
eVyhen timer recording is activated.
For example:
Searching for the 2nd recorded segment in the forward
direction,
Press INDEX »mi twice during playback or stop mode.
6 ©
e After finding the specific recorded segment, playback
starts automatically.
eFor the reverse direction, press INDEX Ha-qí
e Up to 20 programmes can be searched for in both
directions.
eWhen the opposite INDEX button is pressed, the
number shall be decreased till 1.
e The figure on the display is decremented by 1 each time
an index signal is located. Bear in mind that the display
will be decremented in this way even while either INDEX
button is being pressed.
e The INDEX search function can only work correctly, if
the index signals are spaced at least 3 minutes apart in
the SP mode and 5 minutes apart in the LP mode.
Basic Operations
CES
(f=
To adjust the tracking and the
vertical locking
TRAG
— kh
A
For manual tracking adjustment
The + and — buttons are used to adjust the tracking
when. for example, noise bars on the picture are better
removed manually than by the automatic digital tracking
control.
Press both buttons together to return to automatic digital
tracking control.
For slow tracking adjustment
When noise bars appear during Still or Slow playback,
switch over to slow playback and adjust with the + or —
button to reduce the noise bars.
For vertical locking adjustment
Use the + and — buttons to minimize any vertical jitter
during still-picture playback.
e Even after manual adjustment, noise bars or vertical
jitter may not be eliminated completely, especially for
tapes recorded on another VCR. This is not malfunction.
Notes:
e Cue, review or slow playback will be automatically
released after 10 minutes. and sílil piaypack after
5 minutes.
ein “LP” mode only:
1. During any playback mode other than normal
playback, the picture may have some noise bars, the
colour may be unstable, or a black and white picture
may appear.
2. When playing back a tape which was recorded on
another VCR, it may be necessary to adjust the
Tracking Control. In some cases the picture quality
may still be inferior. This is due to limitation of format.
19
20
Operations
Display Symbols
1
Ka
Insert a cassette tape.
elf it has already been inserted.
press POWER to tum the VCR on.
г. ` ВЕ
=» Fes
AN IE
"y — Select TV station.
den LJ
©
3 Start recording.
—REC—
Stop recording.
To select the Desired Tape Speed
Press RECORDING SP/LP before recording.
Feo CASING =
Ba |
LP
Os
SP gives the best picture quality.
LP gives the longest recording time.
To interrupt Recording
Press PAUSE/STILL during recording.
Press again to continue recording.
га Ат = =F
mr
РЁ
To record One TV Programme while
Viewing Another Programme
1 Refer to the manual recording operations steps 1 to 3
(page 20).
2 Select the TV programme on your TV set you wish to
view at the present time.
To display the Approximate Remaining
Tape Time
1 Select Tape Length from On Screen Display and
select the corresponding cassette tape length. See
page 33.
o
On Screen Display
©
+
@
©
|
|
—-
ЗЕ
ea
4
=
>» » Y
« F-180: For E30, -60, -90, -120 and -180 tapes.
E-195: For E195 tape.
E-240: For E240 tape.
E-260 >: For E260 and -300 tapes.
2 Press DISPLAY,
NA
> Clock— Counter— Remalning Tape Time—
e The remaining tape time may not be displayed
correctly depending on the tape used.
Notes:
e\Vhen a vidéo cassette with a broken off tab is inserted,
the “SE indication will flash to indicate that recording is
not possible.
eThe recording pause mode will be automatically
— —] ——]—— = a Er mm me mw BR mae me we meme =
released after 5 minutes and be back to the stop mode.
Manual Recording
Basic Operations
Advanced Operations
Timer Recording
Up to 8 timer programmes can be recorded up to one
month in advance by setting the timer.
Editing
Assembly Editing
This enables you to record a new segment immediately
after a previously recorded segment.
Other Functions
On Screen Display
Other Automatic Functions
|
Advanced Operations
Timer Recording
Using On Screen Display
Up to 8 timer programmes can be recorded up to one
monin in advance by setiing the timer, inciuding weekiy
and daily programmes.
Preparations
e insert a cassette tape with an intact erasure prevention
tab.
e Confirm that the TV is on and the VCR viewing channel
is selected.
For Example:
Programme position (channel); 2
Date; 27th, October
Starting time; 20:02
Ending time; 21:30
(Present date; 16th, October)
24
Follow the operation guide on screen display.
Set each item by using A Y < > or v, DATE, ON,
OFF.
Operatons
1 Press MENU, and then select Timer
recording.
Seiect the unoccupied position.
Set Programme position (channel)
He
WN
Set Date “27/10”.
+=
Set Starting time “20:02”. I
sWhen it is kept pressed, the indication changes
in 30-minute steps.
O
Set Ending time "21:30".
Select the desired Tape speed
(SP/LP).
Select PDC ON or OFF (-——).
«PDC is automatically On Screen Display
set to ON if the TV
station transmits PDC (NNN
signals. Butitcan be | :
set to OFF manualiy [r= == ox = ex |
. . по ETT ria rian ve
if desired. =:
O Y O
9 Press STORE.
To activate timer recording. press
IV TIMER REC.
Timer Recording
Weekly Timer Recording
in step 4, select the desired day by pressing Y.
Daily Timer Recording
For this timer function, several groups of days can be
selected.
(A) Daily recording from Monday to Friday.
B) Daily recording from Monday to Saturday.
(© Daily recording from Sunday to Saturday.
In step 4, select the desired days by pressing Y.
Timer Recording from External Signal
Source
If Timer Recording is performed by a unit connected to
the AV1 or AV2 socket, select the At or A2 indicator for
the programme position,
Setting other Programmes in
Succession
Repeat steps 2-9.
Checking a Timer Programme
e The VCR must be turned on.
eConfirm that the TV is on and the VCR viewing channel
is selected.
Press CHECK,
#On Screen Display may be
distorted in the PDC/VPS
recording standby mode.
On Screen Display
F-anmrallians a Timar Dra
Tat EAL EN Wr LEE "e E E ERE Я N | Wir
e The VCR must be turned on.
eo Confirm that the TV is on and the VCR viewing channel
is selected.
1 Press CHECK.
2 Select the desired timer programme.
3 Press CANCEL.
1 pps
| СнЕСК agar
Soa
1 CE.
Note:
If a timer recording is not performed to the end (due to
insufficient tape or cancellation by the user), the
programmed timer recording data will be cancelled from
the memory by 4 a.m. two days later.
However, if the Timer Record Function is activated at that
time, the programmed timer recording data will be
cancelled at 4 a.m. the next day.
PDC (Programme Delivery Control)
The Programme Delivery Control (PDC) is a very
convenient system which assures that the TV
programmes you have programmed for timer recording
will be recorded exactly from beginning to end, even if the
actual broadcasting time differs from the scheduled time
due to delayed start or extension of the programme
duration. Also, if a programme is interrupted and for
example, some special news item is inserted, the
recording will also be interrupted automatically and
resumed when the programme continues.
ein the case of PDC recording, use the correct time
(PDC time) for recording the TV programmes. PDC
recording is not performed when the time (PDC time} is
incorrect, even if only by ane minute, i.e. start time as
published in TV programme guide in newspaper,
magazine, teletext, eic.
Since PDC signals are received when a recording is
programmed using PDC, the power of the unit's tuner
section is turned on and the programmed broadcasting
is received. When a multiple number of programmes
have been programmed for timer recording, all of the
broadcasts concerned will be received in sequence,
These broadcast pictures can be seen on the video
playback channel and AV (no sound).
elf the actual broadcasting times of timer recordings
overlan (regardiess of whether they are PDC-
controlled), the recording that starts first always has
priority, and the recording of the later programme will
start only after the first timer recording has finished.
eWhen the PDC signal drops out because the broadcast
signal is weak, or when a broadcasting station does not
transmit a regular PDC signal, the timer recording will be
performed in the normal mode (without PDC) even if it
was programmed for PDC.
In this case, even if the timer recording is performed,
whatever has been programmed will not be cancelled at
that particular time but at 4 a.m. on the following day.
s\When programmes transmitted by different TV stations
are programmed by PDC at time when one programme
ends as another starts, the first minute at the start of the
second programme will not be recorded.
e PDC recording is also possible during timer
recording from AV2.
Advanced Operations
25
р НН ===
26
Programming the Video
Plus+ PlusCode
Programming is now easier than ever: simply enter the
PlusCode provided in the programme schedule column
carried by newspapers and magazines.
PlusCodes are numbers which are assigned to sach
programme listed in the TV programme schedule carried
in newspapers and TV guides. When these codes are
entered and STORE is pressed. the codes are converted
into the actual programming.
Preparations
einsert a cassette tape with an intact erasure prevention
tab.
eConfirm that the TV is on and the VCR viewing channel
Is selected.
Operations Display Symbols
1 Press VIDEO PLUSH.
—
2 Enter a PlusCode.
Example: 920216
3 Press STORE.
o The VCR will be in the timer recording standby
mode after about 1 minute.
elf the “—— appears in the programme position:
select the programme position of your VCR which
receives the TV station you entered at step 2
using button 4 or Y.
e To extend the ending time or to make any
corrections. use buttons A Y 4 # or A Y,
DATE, ON, OFF.
Notes:
®То release from the standby mode. press TIMER REC.
When the PlusCode is used for programming, the
recording time may be slightly ionaer than the actual
programme time.
#When programming two or more programmes, repeat
steps 1-3,
eThe procedures for checking and cancelling a timer
programme are the same as on page 25.
Editing
Timer Recording
Editing
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of a previous one.
Preparations
eConnect a movie camera or another VCR to this VCR as
shown.
einsert a recorded cassette tape with an intact erasure
prevention tab.
e Select the video source required by pressing INPUT
SELECT to set Al or AZ.
A1: Through AVT socket.
A2: Through AV2 sacket.
Recording VCR
1
Advanced Operations
Playback unlt
Operations
1
Search for the end of the previous
recording.
Press PAUSE/STILL.
PASSE/
STILL
Press REC to switch the VCR from the
pause mode to the recording standby
mode.
—REC
© O
Start the new recording by pressing
PAUSE/STILL again.
SAUSEr
STILL
O
27
28
Other Functions
On Screen Display
Press OSD to make the On Screen Dispiay appear on the
TV screen.
OSD
O
= —— ——— | — -
г
a
m
1)
==
jan |
=
>
— mea}
ÿ ¢
YD
00 DE
o
7 PAN
1 [
@ TV station
@ Error message
Notes:
#On Screen Display may be disturbed or disappear
during special playback.
eWhen the item “On screen display” is set to OFF, the
On Screen Display (except for the error message} wifi
not appear. (See page 32.)
Other Automatic Functions Ш
Automatic Playback
When a cassette without an erasure prevention tab is
inserted, the VCR starts playback automatically.
VCR-off Playback
Whan the VIR ic Sf an incertar! eaczatta ran han
a rr Ya Y Er TT ear ww Eg = FT — e a SE Ell eal y gl “hg Wal =
back by pressing PLAY.
Automatic Rewinding a a
When the tape reaches its end during recording (except
for timer recording) or playback, ıt wit automatically be
rewound to the beginning.
Automatic Switching Off and Ejection
When the VCR is switched off. and inserted cassette can
he ejected simply by pressing EJECT. The VCR will eject
the cassette and automaticaily turn itself off again
var
Le
ng
Various Settings
Storing TV Broadcasts into your
VCR
The VCR is fitted with its own TV tuner (just like a normal
TV set) and can be tuned to receive up to 99 TV
broadcast stations.
Settings Using On Screen Display
Setting the Remote Controller for
Operation of your TV
You can operate some makes of TVs using the supplied
Remote Controller after this setting up.
Setting the Clock of your VCR
The built-in clock is used to activate the timer for
automatic recording and must be set to the correct time.
"
|
1
Various Settings
25
30
Storing TV Broadcasts into your VCR
Introduction
The VCR is fitted with its own tuner (just like a normal TV
set) and can be pre-set to receive up ta 99 TY broadcast
stations.
If VCR is not correctly tuned by Auto setup. follow the
procedure bellow.
Preparation
Confirm that the TV is on and the VCR viewing channel is
selected.
Manual Tuning Procedure
Follow the operation guide on screen display.
Operations
1 Press MENU.
Select Settings.
Select Tuning.
WN
Select Manual.
Select desired programme position.
Select Channel (Ch).
On Screen Display
| a
fo 0
1 ni O Pym | nn
7 Press MENU, and then press EXIT.
To change the programme position or
TV station name:
After step 5 but before step 7, select the programme
position (Pos) or TV station name (Name) item using
€ », and then make the desired change.
Storing TV Broadcasts into your VCH
Auto Setup Restart
When your address changes, follow the procedure below.
Follow the steps 1 to 3 on page 30.
4 Select Auto setup restart.
5 Press STORE.
On Screen Display
!
MET ul i
| Auto setup mear !
i SHpprçi-e on
| |
]
i FI apes 1
| SEE ea mane |
HL т altar ed Ш
La Xd
PRE A HH El AS
xl PORTES =
LEE EL ELE RE
1
Appa DF FORE |
SEA члай
EXIT Moo
Shipping Condition
If you want to return the VCR to the factory-preset
condition, follow the procedure bellow.
Follow the steps 1 to 2 on nage 30.
=== Re MR
4 Select Shipping condition.
5 Press STORE.
e
J pr re
su С -
in a | LLL
Pr ES TORRE On Tr
= IEEE E
EXEL AEN EINER LT
6 Press STORE again.
S DRE
>. | en
ARTA Hw,
Presa TURF 11 cos
ETE
Note:
To re-tune VCR, disconnect mains lead and then
reconnect mains lead. If VCR is off, turn on the VCR.
Auto setup starts.
Various Settings
31
32
Settings Using On Screen Display
Preparations
e Confirm that the TV is on and the VCR viewing channel
ie calartar
Ind ARA Na
e Turn on the VCR.
DATE ON
OFF
VCR functions
On Screen Display
1 Press MENU, and then select Settings.
> (J
© =
3 Select On screen display.
(a)
©
4 Select ON or OFF.
г
~~
>
a
On Screen Display
tm to :
| rr TT j
1 Ci
i a E
| E
[ + зас 1
: CURE 15 aaa I
' a Ea wd ar i
: WCE Tra “ol FET
! E - FE =
Awd mg тык СЧГаГаБ Е
ON: The On Screen Display will appear on the TV
screen by pressing OSD. a a
OFF: The On Screen Display will not appear even if
QSD is pressed.
Settings Using On Screen Display
VCR Display
1 Select VCR Display.
On Screen Display
| Or rear ce es LFF
: E ay SED
| Tape Length iE - CE
. AGE Comma JEZODER
У | |
1 * + bd 1
I STORE Tac I
MFG 1 Ka }
2 Select ON, OFF or DIMMED.
eA Satay on
«© >») | mee ЕО
|
X Ft HI” UMN Ze pn I
ON: When VCR is turned off, the characters are
lit in the VCR display.
OFF: When VCR is turned off, the characters are
not lit in the VCR display.
DIMMED: When VCR is turned off, the characters are
dimmed in the YCR display.
To select the Corresponding Cassette
Tape Length for Displaying the
Approximate Remaining Tape Time
1 Select Tape Length.
A core ama, OF
» CFR Cora CH
4) . "Твое окр = : E- 0
| EZ Creció : SEDCDER |
I
©
| TE e... |
| VENT arenas ga
2 Select the corresponding cassette tape length.
90
«4 E-{80: For E30, -60, -90, -120 and -180 tapes,
E-195: For E195 tape.
E-240; For E240 tape.
a Ta = re A и LL
-260 №»: Бог E260 and -300 tapes.
mi
AV? Connection
1 Select AV2 Connection.
-- c"ange 1
! s-one в qoccge
1 EN. ret = Foul cherpe }
VCR/SAT: When another YCR or the satellite
receiver is connected to the AVZ socket.
DECODER: when the decoder ls connected ta the
AY? socket.
After All Settings are selected
Press STORE, and then press EXIT to make On Screen
Display disappear.
о + ©
STORE EXIT
ngs
Ï
Various Sett
34
a
Setting the Remote Controller for Operation of
your TV
You can operate some TV manufacturers (see next page)
using the supplied Remote Controller after this setting up.
Preparation
Install the batteries in the remote controller. Sees page 13.
Operations
1 Turn on the TV.
2 Press corresponding operation button
to your TV manufacturer (see following
table) while keeping TV SELECT
pressed.
elf setting is correct. TV will be tumed off
automaticalhy.
Note:
Some TV models cannot be operated using this remote
controller.
Setting the Remote Controller for Operation of your TV
Ema
TV Manufacturer Operation Button
=
== ai ain ee == 1-0! a -
=". TV Manufacturer Operation Button
: Tv SFLEZT _
OO +}
TY SELECT
OO + |
Panasanic
!
on
HT
Г
Im
—
( i
É
>
—
m
—
=
a
Eu
m
=
=
=
о
I»
+
mi
GRUNDIG, Blaupunkt,
SIEMENS
!
LG
Fr
Г
ra
a
+
©
ME
PHILIPS, LOEWE, SAMSUNG,
RADIOLA, DUAL, PYE, BUSH.
GOODMANS, ELEMIS CURTIS
T7 SELECT
o
=
e
TELEFUNKEN
t
5
Mi
=
Mm
(5
+
| Ty SELECT OFF
SONY | ( ) | + |
| Y SELECT OFF
METZ | ) | - |
FERGUSON, THOMSON, Tu SELECT OISELAY >
; TELEFUNKEN, GOODMANS, | { )
| SABA
FERGUSON, THOMSON, | XX CHECK -
TELEFUNKEN, GOODMANS O
FERGUSON, THOMSON, T SELECT CANCEL +
TELEFUNKEN, GOODMANS,
SABA
FERGUSON, TELEFUNKEN, "7 TIMER REC +
aePaAAARIO CAÑA | |
GOODMANS SARA A nu
o
FERGUSON, THOMSON,
TELEFUNKEN, GOODMANS,
SABA
FERGUSON, THOMSON,
TELEFUNKEN. GOODMANS.
SABA, NORDMENDE. BRANDT
|
©
Fr
r
Fil
FA
1
y
m
OS
A
“4
0
T
x
О 9
fp ———
HITACHI
—
T+ SELECT _
SIEMENS e C3)
Y SELECT
SAMSUNG | O
Ty SELECT
ITT. NOKIA, SELECO O + 5)
Ti SELECT
NOKIA, SALORA ; + “ 6
J Le
Ty SELECT
MIVAR ! ) + { 7 )
: Ty SELECT
TOSHIBA { ) + / 8 )
| :
| Y 5ELES
|
TY SELECT |
Ts SELECT NAUT SELECT [ =
SHARP O + CU) E
O
T+ SELECT : с)
MITSUBISHI ) + (Ч ) ©
Ty SELECT 2
| ) * "en
TELEFUNKEN ' ) + Ces
EXIT >
When the TV manufacturer Is Panasonic or HITACHI:
When the TV's power is turned off in step 2 above, turn it
back on and adjust the TV's volume using this remote
controller. The volume can be adjusted if the operation
button matches the TY manufacturer.
If it is not possible to adjust the TV's volume, try pressing
the other operation button to match the TV manufacturer
again uniii ihe voiume can be adjusied.
“When the TV manufacturer is FERGUSON,
THOMSON, TELEFUNKEN, GOODMANS, SADA,
NORDMENDE or BRANDT:
How to change the programme position of TV:
1 Press » (TV) to make POS appear on screen display.
2 Press VOLUME + or —. a. и
e To adjust the TV's volume using the remote controller
after that, press A {TV) to make POS on screen
display disappear and then adjust the volume. For
some modeis, FOS disappears automatically alter
several seconds. In these cases, this operation is not
necessary.
Note:
FERGUSON, THOMSON, TELEFUNKEN. GOODMANS -—
and SABA have plural operation buttons. Although some
models may operate with any of these operation buttons,
other models may operate with only one operation button.
Check each operation button in turn, and set the optimal
operation bution.
36
Setting the Clock of your VCR
The built-in clock is used to activate the timer for
automatic recording and must be set to the correct time.
The built-in digital clock employs the 24-hour system.
If VCR is not correctly set by Auto setup, follow the
procedure below.
Preparations
e Confirm that the TV is on and the VCR viewing channel
is selected,
e Turn on the VCR.
Manual Clock Setting
Follow the operation guide on screen display.
Operations
1 Press MENU, and then select
Settings.
5 Set Date (D).
Select Clock.
Set Time (H/M).
e When it is kept pressed, the indication changes in
30-minute steps.
2
3 Select Manual setting.
4
6 Set Month (M).
7 Set Year (Y).
On Screen Display
— дл |
| = нат == я
Press STORE.
The clock will start.
9 Press EXIT.
Automatic Clock Setting
Follow steps 1 to 2 of the above procedure.
3 Select Automatic setting.
4 Press STORE.
e The clock is set automatically.
Notes:
e The clock operates for at least 60 minutes by its backup
system in the event of power failure.
eWhen the item “Automatic clock-set la” is ON on
screen display. Automatic time correcting function is
activated.
The Automatic time correcting function will only work
when the VCR is in standby. This function will only work
during timer recording standby mode.
Helpful Hints
Before Requesting Service
Before requesting service, check the following points
once again.
Precautions
Please read these cautions before you operate this VCH.
Specifications
Зент же отв meee
Helpful Hints
37
Before Requesting Service
Before requesting service, check the foliowing points once again. TT
i
| E | Message of On Screen Display is displayed.
CAUSE — RENEOY vu |
This action is not possicie | VIDEQ PLUS +4 is pressed Set date and time.
before time and date is set | when date and time is not set.
REC, PLAY, FF or REW is Insert a video cassette.
Please inser: | pressed when no cassette in
video tape x
: the VCR. ;
Please use ; REC is pressed without tab Use a cassette with tab.
unprotected tape of Cassette.
This VCR has a seif-diagnosis and display function. If the VCR detects trouble during installation or during use, the following
indications automatically appear in the VCR display. Indications are displayed in the form of a single English letter pius two
| numbers such as [HO1].
38
HOO Some trouble has occurred. Consult your dealer for further advice.
(Numbers following H and F
FCO differ according to the status
cu of the VCR.)
Before Requesting Service
VCR will not operate correctly
EE EE ee 1
—.. CAUSE
REMEDY CHECKED
VCR display is not
illuminated.
Mains lead Is not connected.
Reconnect mains lead to VCR,
* VCR Display setting is OFF.
Set VCR Display to ON or DIMMED, See page 33.
| VCR display is
illuminated but VCR
will not operate.
: VCR is in timer mode.
Press TIMER REC to operate VCR manually.
Safety devices are operating.
Disconnect mains lead and wait for 1 minute.
Reconnect mains supply and check functions.
Condensation may have
formed,
"Do not operate VCR for 1 hour.
. Playback will not operate correctly
CAUSE
REMEDY CHECKED
Picture noisy or not
in colour.
Horizontal bars or
lines run down the
£eraan
e" E a
, Tracking is not correct.
Adjust the tracking. See page 15.
TV set is not tuned to VCR.
- TV tuning. See page 10.
Operate RF OFF/TEST SIGNAL on VCR and check
! Video heads are clogged or;
— worn. |
Consult your dealer for further advice.
Head cleaning by service agent is not covered by
warranty.
Helpful Hints
38
40
Recording v will not operate correctly - re
CAUSE REMEDY
! "BIE" indication Erasure prevention tab on Use tape with intact erasure prevention tab, or
. flashes whenever cassette is broken off. cover tab hole with adhesive tape, if original
: recording is recording is no longer required.
: attempted.
Picture is recorded Aerial or aerial lead is Check aerial connection to VCR. See page 8.
with noise or blank defective. Check your normal TY picture. If there is no picture,
screen. = check your aerial.
VCR is not correctly tuned. He-tune VCR. See pages 30-31.
A1 or A2 is selected. Seiect the required TV programme.
Timer recording Clock or calendar is 1. Check clock and calendar. Set to present time.
cannot be incorrectly set. (Note this is a 24 hour clock.) See page 34.
: performed.
Recording start or end time Set recording start and end time correctiy.
setting is incorrect.
= VCR is not set for timer Press TIMER REC after programming for timer
> recording. recording.
AV externa! * A1 or A2 is not selected. Select A1 or A2 by pressing INPUT SELECT.
recordings cannot — +
be made. ¡ External AV connections are Check that connections for extemal video and
| incorrect. audio source are correct. Seg page 27.
Eon. =
ии Remote controller will not work correctly _ AA
“SYMPTOM CAUSE REMEDY | CHECKED
on + ld kl
Remote controller
does not operate
correctly.
: Remote controller transmitter
: beam is not reaching VCR.
Ensure that remote controller is being pointed at
VCR and that transmitter beam is not obstructed.
| Distance is too far.
Use remote controller within 7 m of VCR. If this
range is not possible, replace batteries.
; Batteries are exhausted.
Repiace batteries. Note precaution for replacement
on page 13.
; Batteries are incorrectly fitted
: with (+/—) reversed.
Fit batteries correctly as shown on page 13.
Precautions
Before Requesting Service
Precautions
Please read these cautions before you operate this VCR.
Avoid Sudden Changes in Temperature
H tha Yo сео Поет Вкл
61 LEER WALL BD OU HEY PERS ANA E
П
warm place, condensation may for
inside the VCH.
3
o
5
rire
=
Humidity and Dust
Avoid places where there is high humidity or much dust,
which may cause damage to internal parts.
Do Not Obstruct the Ventilation Holes
The ventilation hoies prevent abnormal increases in
temperature. Do not block or cover these holes.
Especially avoid covering the holes with soft materials
such as cloth or paper.
Keep away from High Temperature
Keep the VCR away from extreme direct heat such as
direct sunlight, heating radiators, or closed automobiles.
Keep Magnets away
Never bring a magnet or magnetized object near the VCR
because it will adversely affect the performance of the
VCH.
No Fingers or Other Objects Inside
Touching internal parts of this VCR is dangerous, and
may cause serious damage to the VCR. Do not attempt to
disassemble the VCR. There are no user serviceable
parts inside.
Keep Water away
Keep the VCR away from flower vases, tubs, sinks, etc.
CALITION: If liquids are spilled into the VCR, serious
damage could occur. If you spill any liquid into the VCR,
consult qualified service personnel.
Cleaning the VCR
Wipe the VCR with a clean, dry cloth. Never use cleaning
fluid, or other chemicals. Do not use compressed air to
remove dust.
Stacking
Place the VCR in a horizontal position, and do not place
anything heavy on it.
Video Head Clogging
The video heads place picture signals on the tape during
Fran and raad nintirra cicle fraem thao tama Airis
E A E AE thd AL Id В | pr ra A ея il ILI RAEE IA LO я Td EL HI ей
playback and they are, therefore, of critical importance for
the picture quality. To ensure that they can always
provide optimum picture quality, this VCR is equipped
with an Auto Head Cleaning Function that removes tape
particles and dust from the video heads. However, if the
VCR is used over extremely long periods of time, these
heads may still become dirty and clogged. In such a case,
the signals can no longer be recorded correctly, and the
playback picture will he distorted accordingly. This is the
case, for example, during the playback of a tape, the
sound 15 reproduced normally, but no picture is seen, or
the picture is greatly distorted. When such a symptom
case occurs have the recorder checked by qualified
service personnel.
Head cleaning by service agent is not covered
by warranty.
Condensation may form in the VCR if:
e The VCR is in a room where the heater has just been
turned on,
e The VCR is in a room with steam or high humidity.
e The VCR is brought from cold surroundings into a well-
heated room.
e The VCR is suddenly brought from cool surroundings,
such as an air-conditioned room or car, to a place which
is hot and humid.
Note:
Do not operate the VCR for at least 1 hour if any of the
above conditions occur.
This VCR does not incorporate a dew sensor.
Tape Care
Some do's and don’ts on tape care,
DO:
1) Use a good quality branded tape. such as Panasonic.
2) Keep in the Box supplied with your tape. or a video
case, when not in use,
3) Try to use all the tape on a cassette by making
recordings not only at the tape start but also in the
middle and end sections. This will avoid many
repeated recordings at the beginning of the tape
resulting in premature wear.
4) Take care to insert a tape correctly into the VCR to
avoid damage.
DO NOT:
1) Expose the tape to high humidity or temperature.
2) Expose to liquid.
3) Expose to dust particies by storing directly on a carpet
for example.
4) Use a damaged tape or attempt to repair,
5) Dismantle the cassette housing.
6) Attempt to lift the front cassette flan or touch the tape
surface.
Helpful Hints
42
Specifications
NV-SD400B...{(U.K. model), Bl...(EIRE model)
у
1
"er
= Power Source:
Dé Li
vi
Video Recording System:
Video Heads:
Tape Speed:
Tape Format:
Record/Playback Time:
VIDEO
Television System:
Modulation System:
Input Level:
Output Level:
AUDIO
Input Level:
Output Level:
Audio Track:
Power Consumption:
Video Horizontal Resolution:
Signal-to-Noise Ratlo:
Audio Frequency Hesponse:
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
Standard Accessorles:
E Sr ak rm A mm
220-240 \ АС 50-60 Н2
21 watts
PTA TI
2 rotary heads, helical scanning system
4 heads
SP, 23.39 mm/sec.
LP; 11.7 mm/sec.
VHS tape
SP; 240 min. with NV-E240
LP; 480 min. with NV-E240
CCIR; 625 lines, 50 fields, PAL colour signal
Luminance; FM azimuth recording
Colour signal; converted subcarrier phase shift recording
AV, 1.0 Vp-p,
AV; 1.0 Vp-p.
RF Modulated; UHF channel 36 (+6),
75 ohm, teminated
75 ohm, terminated
75 ohm
AV;
AV;
1 track (Normal-mono only)
—6 dev,
—6 dBV,
more than 10 kohm
less than 1 kohm
Colour; more than 240 lines (SF)
Video; more than 43 dB (SP)
Audio; more than 43 dB
80 Hz-10 kHz
5C-Z00 ~ o PTT TT р В LT Tm
35%—80% : => нок
4.7 kg
430 (Wy x91 (H)>x 310 (D) mm
1 pc. RF Coaxial Cable
1 pc. Remote Controller
2 pcs. "RE" size batteries
1 pc. AC Mains Lead
Weight and dimensions shown are approximate.
Specifications are subiect to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement