Panasonic TC11LV1 Operating Instructions

Add to my manuals
60 Pages

advertisement

Panasonic TC11LV1 Operating Instructions | Manualzz
Combination 11˝ Diagonal
LCD TV/DVD Player
Operating Instructions
Model No.
TC-11LV1
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com
(U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com
(Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca
(Canada)
This manual is divided into two parts, the “Install and TV Adjusts” and “DVD Operation Guide” :
Install and TV Adjusts: Details on installation of the unit and adjustments to achieve optimum quality of the TV.
DVD Operation Guide: Details on operating instructions for playing discs such as DVDs and CDs.
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this
manual for future reference.
English
TQBC0357-1
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are
a risk of electric shock to
persons.
The exclamation point within
a triangle is intended to tell
the user that important
operating and servicing
instructions are in the papers
with the appliance.
■ Note to CATV System Installer: This reminder is provided to direct the CATV system installer’s attention to
Article 820–40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
■ Important Safety Instructions for LCD TV
1)
2)
3)
4)
5)
Read these instructions and apply them with your LCD TV.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water. For example: Avoid placing it near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool, etc.
6) Clean only with dry cloth. Unplug this LCD TV from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation
of the LCD TV and to protect it from overheating. These openings must not be blocked or covered. There should be
at least 10 cm of space from these openings. The openings should never be blocked by placing the LCD TV on a
bed, sofa, rug or other similar surface. This LCD TV should not be placed in a built-in installation such as a bookcase
unless proper ventilation is provided.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
10) Only use attachments/accessories specified by the manufacturer. Otherwise it may cause hazards.
11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
12) Unplug this apparatus during lightning storms or when it will be left unused for long periods of time. This will prevent
damage to the receiver due to lightning and power-line surges.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Upon completion of any service or repairs to this LCD TV, ask the service technician to perform routine safety
checks to determine that the television is in safe operating condition.
14) Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power
supplied to your home consult your television dealer or local power company.
15) Follow all warnings and instructions marked on the LCD TV.
16) Never push objects of any kind into this LCD TV through cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the LCD TV.
2
Important Safety Instructions
17) If an outside antenna is connected to the television
equipment, be sure the antenna system is grounded
EXAMPLE OF ANTENNA GROUNDING AS
ANTENNA
so as to provide some protection against voltage surges PER (NEC) NATIONAL ELECTRICAL CODE
LEAD-IN WIRE
and built up static charges. In the U.S. Selection 810-21
of the National Electrical Code provides information with
GROUND
respect to proper grounding of the mast and supporting
CLAMP
structure, grounding of the lead-in wire to an antenna
ANTENNA
discharge unit, size of grounding conductors, location
DISCHARGE UNIT
of antenna discharge unit, connection to grounding
(NEC SECTION 810-20)
electrodes, and requirements for the grounding
ELECTRIC
electrode.
SERVICE
GROUNDING CONDUCTORS
EQUIPMENT
18) An outside antenna system should not be located in the
(NEC SECTION 810-21)
vicinity of overhead power lines or other electric light or
GROUND CLAMPS
power circuits, or where it can fall into such power lines or
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
circuits. When installing an outside antenna system
(NEC ART 250, PART H)
extreme care should be taken to keep from touching
such power lines or circuits as contact with them
might be fatal.
19) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD TV.
c. If the LCD TV has been exposed to rain or water.
d. If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the LCD TV to normal operation.
e. If the LCD TV has been dropped or the cabinet has been damaged.
f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
20) When replacement parts are required, be sure the service technician to use replacement parts specified by the manufacture that
have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
21) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
22) CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
23) CAUTION: USE WITH OTHER STAND MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.
24) CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE
SAME OR EQUIVALENT TYPE.
NOTE:
equipment is designed to operate in the U.S.A. and other countries where the broadcasting system and
• This
AC house current is exactly the same as in the U.S.A.
marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such
• The
is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time.
■ Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.
This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible
LCD panel deterioration can be limited by observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
■ This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal
of these materials may be regulated in your community due to environmental considerations. For disposal or
recycling information please contact your local authorities, or the Electronics Industries Alliance: www.eiae.org.
3
Dear Panasonic Customer
Welcome to the Panasonic family of customers.
We hope that you will have many years of enjoyment from your new
combination 11 ″ Diagonal LCD TV/DVD player.
To obtain maximum benefit from your set, please read these instructions before making
any adjustments, and retain them for future reference.
Retain your purchase receipt, and note down the model number and serial number of
your set in the space provided on the rear cover of these instructions.
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com
(U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com
(Puerto Rico)
For assistance, please call : 1-800-561-5505
or visit us at www.panasonic.ca
(Canada)
Federal Communication Commission Information
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. If this
equipment does cause or receive interference, which can be determined by turning equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the TV antenna.
Increase the separation between TV and other equipment.
Connect TV into separate outlet from other equipment.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
CAUTION:
COMBINATION 11″″ DIAGONAL LCD TV/DVD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS
COMBINATION 11″″ DIAGONAL LCD TV/DVD PLAYER USES A VISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE COMBINATION
11″″ DIAGONAL LCD TV/DVD PLAYER CORRECTLY AS INSTRUCTED.
WHEN THIS COMBINATION 11″″ DIAGONAL LCD TV/DVD PLAYER IS PLUGGED INTO THE WALL OUTLET,
DO NOT PLACE YOUR EYES CLOSE TO THE DISC SLOT OR OTHER OPENINGS TO LOOK INTO THE INSIDE
OF THIS PLAYER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
4
Table of Contents
Installation and TV Settings
Important Safety Instructions ...................................... 2
Federal Communication Commission Information ....... 4
Installation ..................................................................... 6
Disc handling ............................................................... 6
SUPPLIED ACCESSORIES ........................................ 7
Remote control battery installation ............................... 7
Connecting the Antenna Cable to the RF In Terminal ...... 8
Antenna / Cable Connection ........................................ 8
Antenna Connection (Cable Box, no VCR) .................. 9
Antenna Connection (Cable Box, and VCR) ................ 9
How to connect the input terminals ............................ 10
How to connect the DVD OUT Terminals ................... 10
Connecting Headphones / Earphones ....................... 10
Connecting OPTICAL audio cable ............................. 10
Power ON / OFF ........................................................... 11
Connecting the plug to the Wall Outlet....................... 11
How to Turn the Power On ......................................... 11
Location of Controls ................................................... 12
Flow Chart of TV menu ............................................... 14
Selecting LANGUAGE .................................................... 16
Tuning channels (Automatic channel programming) ...... 16
Tuning channels (Manual channel programming) ....... 17
Playing a VCR or other peripheral equipment ......... 18
Setting condition to be displayed ............................. 19
Child lock ..................................................................... 20
ASPECT Controls ........................................................ 21
Picture Adjustments ................................................... 22
Adjusting screen position and size ........................... 24
Audio Adjustments ..................................................... 25
Selecting STEREO/SAP/MONO .................................. 26
SURROUND Control ................................................... 26
Customizing the VIDEO INPUT labels ....................... 27
Natural Color ............................................................... 28
Automatically changing screen size
for VIDEO INPUT modes (ID-1) .................................. 28
To eliminate noise at the top and bottom of
the screen (IMAGE ADJ.) ............................................ 29
DVD (CD) Operation Guide
Features of DVD on this Product ............................... 32
Enjoying digital audio output from the digital audio
output connector ........................................................ 33
Location of Controls for DVD Operation................... 34
Location of front operation panel .............................. 35
Basic play .................................................................... 36
To play ........................................................................ 36
Stopping play ............................................................. 37
Skipping chapters or tracks ........................................ 38
Still picture (Pause) .................................................... 38
Rapid advance (Rapid reverse) ................................. 38
Frame advance (Frame reverse) [DVD/Video CD] .... 39
Slow-motion play [DVD/Video CD] ............................. 39
Cancelling playback control [Video CD] ..................... 39
Using a Top MENU [DVD] .......................................... 39
Using a DVD MENU [DVD] ........................................ 39
Random play [CD] ...................................................... 40
Selecting sound field .................................................. 40
Repeat play ................................................................ 41
A-B repeat play .......................................................... 41
Changing audio soundtrack language [DVD] ........... 42
Changing subtitle language [DVD] ............................ 43
Viewing from another angle [DVD] ............................ 43
General information about GUI screens ................... 44
Common procedures ................................................. 44
Screen for disc information (for DVD) ........................ 45
Screen for disc information (for Video CD/CD) .......... 46
GUI screen reference chart ........................................ 47
Initial settings .............................................................. 48
Common procedures ................................................. 48
DISC MENU ............................................................... 49
VIDEO MENU ............................................................ 51
DISPLAY MENU ......................................................... 52
AUDIO MENU ............................................................ 52
Initial setting condition of DVD SETUP menu ............ 53
Language code list ..................................................... 54
How images appear on your TV
(aspect ratios of the screen) ......................................... 55
Troubleshooting .......................................................... 56
Maintenance ................................................................ 58
Specifications .............................................................. 59
5
Installation
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
To ensure optimum picture quality do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,
Antenna cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components require.
Also determine the length of cable you’ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed clearly. Turn off
florescent lamps near the LCD and place in a location not exposed to outdoor light.
Disc handling
Handling precautions
Hold the disc by the edges so the surface will not be soiled with fingerprints.
Fingerprints, dirt and scratches can cause skipping and distortion.( ):
Do not write on the label side.
Do not use record cleaning sprays, benzine, thinner, static electricity
prevention liquids or any other solvent.
Be careful not to drop or bend the disc.
Do not install more than 1 disc.
Store the disc in its case when not in use.
•
•
•
•
•
•
If the surface is soiled
Wipe gently with a soft, damp (water only) cloth.
When wiping discs, always wipe from the center toward the outer edge.
(If you wipe using a circular motion, circular scratches can occur, which will cause noise.)
If the disc is brought from a cold to a warm environment, moisture
may form on the disc
Wipe with a soft, dry, Iint-free cloth before using the disc.
Improper disc storage
You can damage discs if you store them in the following places:
Areas exposed to direct sunlight
Humid or dusty areas
Areas directly exposed to a heat outlet or heating appliance
•
•
•
Discs which cannot be played with this player
DVD with Region No. other than “1” or “ALL”
DVD-ROM
DVD-R/DVD-RAM
DVD-AUDIO
CD-ROM
VSD
CDV
CD-G
CD-RW
CVD+RW
CDV
SVCD
Divx Video Disc etc.
Do not try to play Photo CD or CD-R.
(Data on the disc may be damaged.)
•
•
•
•
•
•
•
•
6
•
•
•
•
•
•
Installation
SUPPLIED ACCESSORIES
Check the accessories before installations.
• Operating Instruction book
(TQBC0357/0358/0359)
• Remote Control Transmitter
(TNQE284)
EJECT DISPALY
POWER
TO
PM
EN
U
ANGLE
DV
MEN D
U
• Battery for the Remote Control
Transmitter
(2 × AAA size)
ENTER
TV
MENU
RETURN
SLOW/SEARCH
SKIP
STOP
PAUSE
ASPECT TV/VIDEO
SLEEP
CH
PLAY
MUTE
VOL
SURROUND
CANCEL
REPEAT MODE A-B REPEAT PLAY MODE
R-TUNE
• Warranty Card
(TQDC18014)
• AC Adaptor & AC Cord
AC Adaptor: (N0JZHK000005)
AC Cord: (K2CA2EA00005)
• Service Center List
(TQBC7055-2)
Remote control battery installation
Requires two AAA batteries.
1. Turn the transmitter face down.
2. Install the batteries as shown in
3. Replace the cover and slide in
Remove top cover by pressing
the battery compartment. (Polarity
reverse until the lock snaps.
down on marking and sliding
+ or – must match the markings in
cover off in the direction indicated.
the compartment).
Two AAA size
Helpful Hint:
For frequent remote control
users, replace old batteries with
Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will
damage the remote control transmitter.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new
batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when the remote control acts
sporadically or stops operating this unit.
7
Installation
Connecting the Antenna Cable to the RF In Terminal
Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best reception
an outdoor antenna is recommended. Antenna Mode must be set to TV.
UHF Antenna
S-VIDEO
VIDEO
L
INPUT
VHF Antenna
AUDIO
R
DVD
DIGITAL
AUDIO OUT
OUTPUT
S-VIDEO
RF in Terminal
Mixer
Coaxial Antenna Plug
75 Ohm
Coaxial Cable
Antenna / Cable Connection
Incoming Cable From Home Antenna (75 Ohm)
VHF/UHF
Incoming 75 Ohm Cable (From Cable Company)
Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company. Antenna
Mode must be set to CABLE. (Refer to Antenna Mode section.)
VHF/UHF
Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local Cable company for its compatibility
requirements.
8
Installation
Antenna Connection (Cable Box, no VCR)
Use this configuration when connecting the TV to a cable TV system using a Cable Box.
S-VIDEO
L
INPUT
VIDEO
AUDIO
CABLE BOX
R
DVD
DIGITAL
AUDIO OUT
OUTPUT
S-VIDEO
ANTENNA
TERMINAL ON
THE LEFT SIDE
OF THE TV
OUTPUT
INPUT
TERMINAL ON THE BACK
OF THE CABLE BOX
Connect the cable from the
Output terminal on the back of
the Cable Box to the ANT
terminal on the left side of the
TV.
Incoming Cable from
Antenna or Cable TV
System
Antenna Connection (Cable Box, and VCR)
Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.
CABLE BOX
S-VIDEO
L
INPUT
VIDEO
AUDIO
R
DVD
DIGITAL
AUDIO OUT
OUTPUT
S-VIDEO
OUTPUT
INPUT
TERMINAL ON THE BACK
OF THE CABLE BOX
ANTENNA
TERMINALS ON
THE LEFT SIDE
OF THE TV
Connect the cable from the
Output terminal on the back
of the Cable Box to the
Antenna input terminal on the
back of the VCR.
Connect the cable from the
antenna or cable system to the
Input terminal on the back of the
CABLE BOX.
Incoming Cable from
Antenna or Cable TV
System
VCR
TO VCR
Connect the cable
from the Output
terminal on the back of
the VCR to the
Antenna input terminal
on the left side of the
TV.
ANT INPUT
OUTPUT
ANT OUTPUT
S-VIDEO
VIDEO
L-AUDIO-R
Note: When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel
to CH3 or CH4, cable. This does not apply when signal is input from VIDEO INPUT.
9
Installation
How to connect the input terminals
How to connect the DVD OUT Terminals
Connects VCRs and other peripheral equipment
(TV)
(Super-VHS VCR)
S-VIDEO
L
INPUT
VIDEO
AUDIO
R
DVD
DIGITAL
AUDIO OUT
Audio
R OUT L
Video
OUT
OUTPUT
S-VIDEO
S-Video
OUT
Audio
R INPUT L
S-Video
IN
S-VIDEO cable
VIDEO
VIDEO
L
VIDEO IN
S-VIDEO
Connect the
S-VIDEO or
VIDEO Terminal.
AUDIO
S-VIDEO
AUDIO/
DIGITAL AUDIO
(PCM/BTSTREAM)
OPTICAL
DVD OUT
R
AUDIO
Notes:
When a monaural VCR is used, connect the monaural audio cable to the AUDIO-L (Left) terminal.
When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the
video input terminal are connected at the same time.
•
•
Connecting Headphones / Earphones
Connect headphones / earphones as follows.
(M3 plug)
(Optional)
Connecting OPTICAL audio cable
Refer to OPTICAL output for details on DVD Operating Guide.
(See page 52)
S-VIDEO
S-VIDEO
L
INPUT
VIDEO
R
DVD
DIGITAL
AUDIO OUT
OUTPUT
S-VIDEO
VIDEO
L
VIDEO IN
AUDIO
AUDIO
S-VIDEO
AUDIO/
DIGITAL AUDIO
(PCM/BTSTREAM)
OPTICAL
DVD OUT
R
Optical digital cable
(Optional)
Connect without
bending.
Optical input
terminal
Audio system equipped with
optical audio connector.
10
Power ON / OFF
Connecting the Plug to the Wall Outlet
Note:
The TV and AC adaptor will still consume some power
as long as the power cord is still inserted into the wall
outlet.
3
2
1
2
How to Turn the Power On
Push the POWER switch on the TV to turn the set on.
POWER-ON: Green
Turn the power of the TV set off by pressing the
POWER switch on the TV when the TV is on or in
standby mode.
Remote control
sensor
Example: The screen below is displayed for a while
after the TV is turned on. (setting condition
is an example.)
NORMAL
CH 6
STEREO
SAP
MONO
EJECT DISPLAY
POWER
TO
E
PM
NU
ANGLE
D
ME VD
NU
ENTER
TV
MENU
RETURN
POWER
SKIP
STOP
SLOW/SEARCH
PAUSE
PLAY
Press the POWER button on the remote
control to turn the TV off: Red (standby)
Press the POWER button on the remote
control to turn the TV on: Green
11
Location of Controls
Controls on the TV
POWER switch
Remote control sensor
Input mode selection button
(See page 18)
ASPECT mode selection button
(See page 21)
Volume up (+) / down (–)
buttons
Channel up ( ) /
down ( ) buttons
SLEEP timer button
The TV may be preset to switch to stand-by
after a fixed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes
(off timer cancelled) each time the button is
pressed.
30
60
90
0
3 ” will flash.
When three minutes remain, “
The off timer is cancelled if the main power is
turned off.
Starting three minutes before the power is
automatically turned off, the remaining time,
3 → 2 → 1 will blink on the screen.
SLEEP
CH
For DVD/CD disc operation.
(Refer to “DVD/CD Operation
Guide” See page 31)
VOL
SURROUND
Volume Up or Down
Channel Up or Down
SURROUND button
The benefits of surround are
astounding. You can be completely
enveloped in sound, just as if you
were at a concert hall or cinema.
(See page 26)
Valid during DVD mode
REPEAT MODE A-B REPEAT
PLAY MODE
PLAY MODE button (See page 40)
A-B REPEAT button (See page 41)
Repeating selections between two specific points.
REPEAT MODE button (See pages 40, 41)
12
Location of Controls
Stand-by (ON/OFF) button
TV must first be plugged into the wall outlet and turned on at the power switch (See pages 12, 34, 35).
Use with DVD operation. (Refer to “DVD/CD Operation Guide”...See page 31)
EJECT button
Press to eject DVD or CD.
EJECT DISPLAY
POWER
P
TO
NU
ME
ANGLE
D
ME VD
NU
DISPLAY button
Press the DISPLAY button to display the current system status.
Refer to “DVD Operation Guide” when using the DVD.
Moves cursor to the
left during menu
mode.
ENTER
TV
MENU
Moves cursor upward during menu mode.
Moves cursor to the
right during menu
mode.
RETURN
STOP
ENTER
SLOW/SEARCH
SKIP
PAUSE
Press TV MENU
button to display
the Menu screen.
PLAY
TV
MENU
RETURN
MENU
ADJUST
SET UP
ENTER
PICTURE
PICTURE ADJUST
ASPECT TV/VIDEO
SLEEP
CH
POSITION / SIZE
AUDIO
AUDIO ADJUST
MUTE
PAGE
RETURN
SELECT
Moves cursor
downward during
menu mode.
Press to return to
previous menu
screen.
VOL
For disc operation use.
(Refer to “DVD/CD Operation Guide”...See page 31)
SURROUND
ASPECT TV/VIDEO
MUTE
MUTE button
Press to mute the sound.
Press again to reactivate sound. Sound is
also reactivated when power is turned off
or volume level is changed.
TV/VIDEO button
This input mode changes each time this button is pressed
(See page 18).
CANCEL
REPEAT MODE A-B REPEAT PLAY MODE
ASPECT button
Changes screen size
(See page 21).
R-TUNE
NORMAL
JUST
FULL
ZOOM
Direct program number selection buttons
R-TUNE
R-TUNE button
Switches to previous channel or video mode.
13
Flow Chart of TV menu
EJECT DISPLAY
POWER
EN
PM
O
T
U
ANGLE
1
D
M E VD
NU
If the TV MENU
button is pressed,
the MENU screen
will be displayed.
If the TV MENU
button is pressed
once more, the
MENU screen will
be cleared.
ENTER
TV
MENU
RETURN
SLOW/SEARCH
SKIP
STOP
PAUSE
TV
MENU
MENU
ADJUST
SET UP
ENTER
PICTURE
PICTURE ADJUST
POSITION / SIZE
AUDIO
AUDIO ADJUST
PAGE
RETURN
SELECT
PLAY
2
ASPECT TV/VIDEO
SLEEP
CH
MUTE
VOL
Select desired MENU by
pushing Right “ ” button
or Left “ ” button.
ENTER
SURROUND
CANCEL
MENU
ADJUST
SET UP
ENTER
PAGE
REPEAT MODE A-B REPEAT PLAY MODE
LANGUAGE
PROGRAM CH
DVD SET UP
R-TUNE
INPUT LABEL
OTHER ADJUST
14
RETURN
SELECT
Flow Chart of TV menu
PICTURE ADJUST
menu
POSITION/SIZE
menu
PICTURE ADJUST
POSITION / SIZE
NORMALIZE
BACK LIGHT
0
PICTURE
0
BRIGHTNESS
0
COLOR
0
TINT
0
SHARPNESS
0
AI PICTURE
AUDIO ADJUST
NORMAL
ENTER
STANDARD
PIC MODE
AUDIO ADJUST
menu
NORMAL
PAGE
NORMALIZE
RETURN
SELECT
SIZE
1
BASS
0
TREBLE
0
PAGE
RETURN
SELECT
0
BALANCE
OFF
SURROUND
RETURN
ENTER
AUTO
MODE
STEREO
SAP
MONO
(See page 24)
OFF ON
(See page 25)
(See pages 22,23)
1 Press to select each item.
2 Press to adjust the screen that is displayed.
ENTER
Notes:
Items displayed in light blue cannot be adjusted.
Display color changes according to input settings.
(Press the TV/VIDEO button to switch inputs.)
•
•
LANGUAGE
menu
PROGRAM CHANNELS
adjust screen
DVD SET UP
PROGRAM CHANNELS
LANGUAGE
SETUP
DISC
AUDIO
ENTER
LANGUAGE
TV
MODE
ENGLISH
ENTER
CHANGE
AUTO
CHANGE
PAGE
CABLE
PROGRAM
ENGLISH
RETURN
SUBTITLE
SELECT
MANUAL PROGRAM
ENGLISH
RETURN
ENTER
(See pages 16,17)
(See page 16)
MENUS
ENGLISH
RETURN
RATINGS
LEVEL 8
(See page 48)
VIDEO INPUT LABEL
setting menu
OTHER ADJUST
setting menu
OTHER ADJUST
INPUT LABEL
VIDEO
VIDEO
ENTER
(See page 27)
NATURL CLR
OFF ON
ID-1
OFF ON
CHANGE
PAGE
RETURN
SELECT
CHANGE
IMAGE ADJ.
RETURN
CHILD LOCK
1
2
OFF ON
(See pages 28,29)
15
Selecting LANGUAGE
It is possible to change the screen menu language to a different language. (English, Français, Español)
1
Press the TV MENU button to display the MENU screen and
select SET UP.
MENU
ADJUST
SET UP
ENTER
PAGE
ENTER
Press to select LANGUAGE.
Press to display the LANGUAGE
screen.
LANGUAGE
RETURN
PROGRAM CH
SELECT
DVD SET UP
INPUT LABEL
OTHER ADJUST
Press to select LANGUAGE.
ENGLISH
FRANÇAIS
ESPAÑOL
2
3
LANGUAGE
ENGLISH
LANGUAGE
Press the RETURN button to return to the SET UP MENU.
ENTER
CHANGE
Press the TV MENU button to exit the SET UP MENU.
RETURN
Tuning channels (Automatic channel programming)
Automatically scans all TV channels and stores them in memory.
1
2
Turn the Power on and press the TV/VIDEO button to display the TV channel.
Press the TV MENU button to display the MENU screen and
select SETUP.
Press to select PROGRAM CH.
MENU
ADJUST
SET UP
PAGE
LANGUAGE
RETURN
PROGRAM CH
ENTER
ENTER
SELECT
DVD SET UP
INPUT LABEL
Press to display the PROGRAM
CHANNELS screen.
Press to select MODE.
3
OTHER ADJUST
PROGRAM CHANNELS
ENTER
Press to select TV or CABLE.
ENTER
MODE
AUTO
TV
CHANGE
PAGE
CABLE
PROGRAM
RETURN
SELECT
MANUAL PROGRAM
4
Press to select AUTO PROGRAM.
AUTO PROGRAM
ENTER
ENTER
CHANGE
PAGE
Activate
"AUTO PROGRAM?"
YES
Press to display the confirmation screen.
16
NO
RETURN
SELECT
5
Press to select YES.
ENTER
Press to select NO.
AUTO PROGRAM
In "AUTO PROGRAM"
CHANNEL
If YES selection
Press to run AUTO PROGRAM
59
MENU
STOP
Channels will automatically advance until all channels have been scanned. Channel numbers with a
video signal present will turn light blue indicating it has been stored in the Channel Scan Memory.
6
7
Press the RETURN button to return to the PROGRAM CHANNELS.
Press the TV MENU button to exit the set up menu.
Notes:
When buttons are pressed with AUTO PROGRAM running, the TV set will return to normal viewing. (Channels
searched up to this point are added.)
After AUTO PROGRAM is finished, the lowest channel number added will be received.
When there are no receivable channels, channel 69 is displayed for TV and channel 125 is displayed for cable TV.
•
•
•
Tuning channels (Manual channel programming)
Use this setting when changing setting of receiving channels or changing the channel display.
Turn the TV on and select the broadcast channel. Follow the steps on the previous page to display the PROGRAM
CHANNEL screen.
Selecting the PROGRAM CHANNELS menu.
1
2
Refer to previous page Tuning channels step 1 to 3.
Press to select MANUAL PROGRAM.
MANUAL PROGRAM
ENTER
ENTER
ENTER CHANNEL
PAGE
ADD
DELETE
121
RETURN
CH SELECT
Press to display the MANUAL PROGRAM
screen.
Adding or deleting channels
3
Press to select channel ( or number keys ).
MANUAL PROGRAM
ENTER
ENTER
ENTER CHANNEL
121
PAGE
ADD
DELETE
RETURN
CH SELECT
Press to add channels to memory
(Channel number turns blue).
4
ENTER
Press to delete channels from memory
(Channel number turns yellow).
5
6
Repeat steps 3 and 4 to continue adding or deleting channels.
Press the TV MENU button to exit the set up menu.
17
Playing a VCR or other peripheral equipment
S-VIDEO
L
Confirming connections
INPUT
VIDEO
AUDIO
R
DVD
DIGITAL
AUDIO OUT
OUTPUT
S-VIDEO
Confirm that the TV is in standby mode.
To S-video output
or video output
Video camera
VIDEO
L
VIDEO IN
S-VIDEO
VCR
AUDIO
S-VIDEO
AUDIO/
DIGITAL AUDIO
(PCM/BTSTREAM)
OPTICAL
DVD OUT
R
To audio output
Laser Disc Player
DVD player
This equipment can also be connected to the
rear terminals. See Connections for details.
Turning the power on and switching input modes
EJECT DISPLAY
POWER
E
PM
TO
NU
ANGLE
D
ME VD
NU
1
POWER
Turn the TV on.
ENTER
TV
MENU
RETURN
SLOW/SEARCH
SKIP
STOP
PAUSE
ASPECT TV/VIDEO
SLEEP
2
CH
The input mode changes each time this
button is pressed.
CH6
PLAY
playing
• When
a VIDEO
playing
• When
a DVD or CD
VIDEO
DVD/CD
MUTE
VOL
Note:
When the remote control is unavailable, input modes can also be switched
on the TV set using the TV/VIDEO button.
SURROUND
3
CANCEL
18
TV/VIDEO
Operate the connected equipment.
Setting condition to be displayed
DISPLAY (On-screen display)
DISPLAY
EJECT DISPLAY
POWER
TO
EN
PM
U
ANGLE
D
M E VD
NU
ENTER
TV
MENU
Press this button to display channel number, off-timer remaining
time, screen modes, and other settings. Display fades away
after about 3 seconds. Press this button again to delete channel
number display.
Aspect status
RETURN
CH 6
FULL
SKIP
STOP
STEREO
SAP
MONO
SLOW/SEARCH
PAUSE
Channel number Video or
DVD/CD Input Selected
Multiplex sound
Disc Icon
(When disc is inserted.)
PLAY
90
SLEEP timer status
The GUI menu bar for DVD operation is displayed by pressing
the DISPLAY button when the above screen is displayed.
DISPLAY
Press to GUI screen
DISPLAY
FULL
DVD/CD
The GUI screen changes
every time the DISPLAY
button is pressed.
(Refer to “DVD Operation
Guide”)
DISPLAY
01 12 01 05 00 00 00
1
2 0
DISPLAY
1 2 OFF
OFF NORMAL
19
Child lock
EJECT DISPLAY
POWER
TO
E
PM
NU
ANGLE
D
M E VD
NU
When CHILD LOCK is ON, the Disc cannot be ejected with the EJECT
button. (The message below is displayed.)
CHILD LOCK ON
EJECT
ENTER
TV
MENU
RETURN
SLOW/SEARCH
SKIP
STOP
PAUSE
On remote
PLAY
1
ASPECT TV/VIDEO
SLEEP
CH
On TV set
MUTE
VOL
Press the TV MENU button to display the MENU screen and select
SET UP.
2
Press to select OTHER ADJUST.
ENTER
SURROUND
Press to display the OTHER ADJUST
screen.
MENU
ADJUST
SET UP
ENTER
PAGE
LANGUAGE
RETURN
SELECT
PROGRAM CH
DVD SET UP
CANCEL
INPUT LABEL
OTHER ADJUST
REPEAT MODE A-B REPEAT PLAY MODE
R-TUNE
3
Press to select CHILD LOCK.
Press to set.
ENTER
OTHER ADJUST
NATURL CLR
OFF ON
CHANGE
PAGE
ID-1
OFF ON
RETURN
IMAGE ADJ.
CHILD LOCK
TV
MENU
To end adjustment.
Note:
The settings are memorized even after power is turned OFF.
20
SELECT
1
2
OFF ON
ASPECT Controls
The TV will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.
STOP
PAUSE
ASPECT TV/VIDEO
SLEEP
CH
ASPECT
PLAY
ASPECT button
The aspect mode changes each time the ASPECT button is
pressed.
NORMAL
JUST
FULL
ZOOM
MUTE
VOL
SURROUND
Picture
Mode
Explanation
NORMAL will display a 4:3 picture at its standard 4:3
size.
4
NORMAL
NORMAL
3
4
JUST
JUST
3
JUST mode will display a 4:3 picture at maximum size
but with aspect correction applied to the center of the
screen so that elongation is only apparent at the left
and right edges of the screen. The size of the picture
will depend on the original signal.
ZOOM mode magnifies the central section of the picture.
4
ZOOM
ZOOM
3
4
FULL
FULL
FULL will display the picture at its maximum size but
with slight elongation.
3
Note:
When ID-1 signal is detected, the ASPECT mode changes to FULL or ZOOM automatically.
Priority is given to S1 when S1 and ID-1 are inputted simultaneously.
•
•
21
Picture Adjustments
1
Press the TV MENU button to display the MENU screen and select ADJUST.
MENU
Press to select PICTURE ADJUST.
ADJUST
SET UP
2
Press to select the menu to adjust.
NORMALIZE
PIC MODE
NORMALIZE is displayed at default.
BACK LIGHT
0
PICTURE
0
BRIGHTNESS
0
COLOR
0
TINT
0
AI PICTURE
SELECT
0
CINEMA
NORMALIZE
DYNAMIC
STANDARD
Displays unaltered image.
CINEMA
Ideal for movies.
22
DYNAMIC
Displays a clear screen with contrast
of light and dark.
ENTER
STANDARD
BACK LIGHT
0
PICTURE
0
BRIGHTNESS
0
COLOR
0
TINT
0
PAGE
RETURN
SELECT
0
SHARPNESS
AI PICTURE
DYNAMIC
OFF ON
button to switch between
PIC MODE
CINEMA
PAGE
RETURN
PICTURE ADJUST
STANDARD
STANDARD
ENTER
STANDARD
SHARPNESS
or right
SELECT
PICTURE ADJUST
Select the desired level by looking at the
picture behind the menu.
ENTER
PAGE
RETURN
POSITION / SIZE
AUDIO
AUDIO ADJUST
Press to display the PICTURE ADJUST
screen.
Press the left
modes.
ENTER
PICTURE
PICTURE ADJUST
ENTER
OFF ON
See next page
Picture Adjustments
BACKLIGHT
Luminance of the back light is adjusted.
PICTURE ADJUST
PICTURE
Selects proper brightness and density for the room.
NORMALIZE
STANDARD
PIC MODE
BRIGHTNESS
Adjusts for easier viewing of dark pictures such as night
scenes or a hair portion.
COLOR
Adjusts slightly to a lighter color.
BACK LIGHT
0
PICTURE
0
BRIGHTNESS
0
COLOR
0
TINT
0
PAGE
RETURN
SELECT
0
SHARPNESS
TINT
Adjust for flesh tone color.
ENTER
AI PICTURE
OFF ON
SHARPNESS
Displays a sharp image.
AI PICTURE
Displays black and white colors more clearly
when turned ON.
• To adjust each item,
ENTER
Press the left
and
right buttons to make
adjustments.
Press the up and down buttons to select each
item.
BACK LIGHT
+5
-
+
-30 to +30
PICTURE
0
-
+
-30 to +30
BRIGHTNESS
-5
-
+
-30 to +30
COLOR
+5
-
+
-30 to +30
TINT
+5
SHARPNESS
0
AI PICTURE
• To reset to standard setting,
-
+
-
+
-30 to +30
-30 to +30
OFF ON
Select NORMALIZE with the up
buttons.
and down
ENTER
Press ENTER button.
•
To return to normal viewing
TV
MENU
Press TV MENU button.
23
Adjusting screen position and size
1
ASPECT
Press to select the screen mode to adjust
screen position and size.
ENTER
TV
MENU
RETURN
SLOW
/SEARCH
SKIP
STOP
For adjusting position
For adjusting size
ZOOM mode
NORMAL and JUST mode
PAUSE
ASPECT TV/VIDEO
2
TV
MENU
SLEEP
Press to display the MENU screen.
Press to select
ADJUST menu.
ADJUST
3
SET UP
PAGE
RETURN
SELECT
Adjusting size
NORMAL
NORMAL
SIZE
1
ENTER
POSITION / SIZE
POSITION / SIZE
NORMALIZE
VOL
CH
PICTURE
PICTURE ADJUST
POSITION / SIZE
AUDIO
AUDIO ADJUST
Adjusting position
MUTE
MENU
ENTER
3
PLAY
Press to
move image
upwards.
NORMALIZE
SIZE
1
Press to narrow.
RETURN
RETURN
Press to widen.
Press to
move image
downwards.
NORMAL
• To return to standard
• To end adjustments
JUST
Press
Press
Press
Press
Press ENTER
Press MENU (RETURN)
Notes:
This TV is equipped with various screen modes. If a screen mode with a different aspect from the broadcast program
is selected, the image will appear distorted. Select the proper screen mode with this in mind.
Be careful when using this TV for commercial purposes or for public use, such as in cafes and hotels, as shrinking
and enlarging images by using screen mode switching function (zoom, etc.) may violate copyright laws.
Images displayed on a wide screen TV will be cut off or distorted at the edges, when viewing normal aspect images
of 4:3 in ZOOM, JUST or FULL mode. Display in NORMAL mode to view the original image intended by the producer.
The adjusted setting will remain even when the TV is turned off.
The signals output from the output terminal on the left of the TV are not affected when the screen size and position are
adjusted.
•
•
•
•
•
24
Audio Adjustments
1
Press the TV MENU button to display the MENU screen and select ADJUST.
Press to select to AUDIO ADJUST.
MENU
ADJUST
POSITION / SIZE
AUDIO
AUDIO ADJUST
Press to display the AUDIO ADJUST screen.
2
SET UP
ENTER
PICTURE
PICTURE ADJUST
ENTER
PAGE
RETURN
SELECT
Press to select the menu to adjust each item.
ENTER
BASS
Adjusts low sounds
TREBLE
Adjusts high sounds
BALANCE
Adjust left and right
volume
Select the desired level by listening to the
sound.
AUDIO ADJUST
NORMAL
AUTO
MODE
BASS
0
TREBLE
0
BALANCE
0
ENTER
STEREO
AUTO
Automatically adjusts
quiet sound and loud
sound for ease of
listening.
STANDARD
STANDARD
Emits the original
sound.
DYNAMIC
DYNAMIC
Gives contrast to
sound.
MUSIC
MUSIC
For programs
consisting mainly of
music. Enhances
high sounds (around
4 kHz).
PAGE
RETURN
SELECT
SURROUND
SURROUND
To enjoy a concert
hall effect, turn
SURROUND to ON
when stereo is
playing.
(See page 26)
AUTO
ENTER
SAP
OFF
MONO
Selecting STEREO/
SAP/MONO.
(See page 26)
To reset to standard setting,
select NORMAL with the up and down buttons and press ENTER.
To adjust settings individually , press the up
and down
buttons to select the
desired menu and adjust using the left and right buttons.
TV
MENU
Press to end.
25
Selecting STEREO/SAP/MONO
Press the TV MENU button to display the MENU screen and select AUDIO ADJUST screen.
Press to select STEREO/SAP/MONO.
AUDIO ADJUST
NORMAL
ENTER
BASS
0
TREBLE
0
0
SURROUND
STEREO
PAGE
RETURN
SELECT
BALANCE
Press to select STEREO/SAP/MONO.
ENTER
AUTO
MODE
SAP
OFF
MONO
ENTER
Helpful Hints:
TV
MENU
• STEREO - Two channel Audio reception.
• SAP - Second Audio Programming (typically
Press to end.
•
used for bilingual audio).
MONO - Use when stereo signal is weak.
SURROUND Control
SURROUND
ASPECT TV/VIDEO
SLEEP
SURROUND
CH
MUTE
VOL
SURROUND Button
The benefits of surround are astounding. You can be
completely enveloped in sound, just as if you were at a
concert hall or cinema.
The surround setting switches on and off each time the
SURROUND button is pressed.
SURROUND OFF
SURROUND ON
SURROUND OFF
Notes:
The surround settings are memorized separately for each SOUND mode (AUTO, STANDARD, DYNAMIC, MUSIC).
Even from the MENU screen the surround setting is possible.
See page 40 for DVD and CD operation.
•
•
•
26
Customizing the VIDEO INPUT labels
Display for each VIDEO INPUT can be changed to match with the connected device (VCR,
DVD Player).
Example: When changing VIDEO to LD.
1
Press the TV MENU button to display the MENU screen and select SET UP.
MENU
ADJUST
SET UP
ENTER
PAGE
LANGUAGE
Press to select INPUT LABEL.
RETURN
SELECT
PROGRAM CH
DVD SET UP
ENTER
INPUT LABEL
OTHER ADJUST
Press to display the VIDEO INPUT
LABEL screen.
INPUT LABEL
VIDEO
VIDEO
ENTER
CHANGE
2
Press to change.
RETURN
ENTER
By pressing this button, display changes as follows:
NTER
VIDEO
BLANK
ENTER
VCR
DTV
DVD
LD
GAME
This button rotates in reverse.
TV
MENU
Press to end.
27
Natural Color
This feature allows you to set a natural color for the picture.
1
2
Press the MENU button to display the MENU screen and select SET UP.
Press to select OTHER ADJUST.
MENU
ADJUST
SET UP
ENTER
PAGE
ENTER
LANGUAGE
RETURN
SELECT
PROGRAM CH
DVD SET UP
Press to display the OTHER ADJUST
screen.
Press to select NATURL CLR.
3
INPUT LABEL
OTHER ADJUST
OTHER ADJUST
Press to turn NATURL CLR ON.
ENTER
NATURL CLR
OFF ON
CHANGE
PAGE
ID-1
OFF ON
RETURN
SELECT
1
IMAGE ADJ.
CHILD LOCK
2
OFF ON
TV
MENU
Press to end.
Note:
Not available for DVD/CD mode.
Automatically changing screen size for VIDEO INPUT modes (ID-1)
If the received signal contains screen size specifications in VIDEO INPUT the screen size is
automatically changed.
1
Press the MENU button to display the MENU screen and select SET UP.
MENU
ADJUST
Press to select OTHER ADJUST.
SET UP
ENTER
PAGE
LANGUAGE
RETURN
SELECT
PROGRAM CH
DVD SET UP
ENTER
INPUT LABEL
OTHER ADJUST
Press to display the OTHER ADJUST screen.
2
Press to select ID-1 (Image Detection).
Press to set.
ENTER
ON
TV
MENU
: When screen size specification signals
are detected, ASPECT mode is
automatically changed.
OFF : ASPECT mode is not automatically
changed. (Turn OFF if this function does
not operate properly.)
Press to end.
Note:
When ID-1 is detected, ASPECT mode changes to FULL.
28
OTHER ADJUST
NATURL CLR
OFF ON
CHANGE
PAGE
ID-1
OFF ON
RETURN
IMAGE ADJ.
CHILD LOCK
SELECT
1
2
OFF ON
To eliminate noise at the top and bottom of the screen (IMAGE ADJ.)
1
Press the MENU button to display the MENU screen and select SET UP.
Press to select OTHER ADJUST.
MENU
ADJUST
SET UP
ENTER
PAGE
LANGUAGE
ENTER
RETURN
SELECT
PROGRAM CH
DVD SET UP
Press to display the
OTHER ADJUST screen.
2
Press to select IMAGE ADJ.
ENTER
Press to select 2.
INPUT LABEL
OTHER ADJUST
OTHER ADJUST
NATURL CLR
OFF ON
CHANGE
PAGE
ID-1
OFF ON
RETURN
IMAGE ADJ.
Press to select 1.
CHILD LOCK
(Example)
TV
MENU
SELECT
1
2
OFF ON
(Example)
Press to end.
Notes:
IMAGE ADJ. settings are stored for TV, VIDEO and DVD each.
This setting will not change during ZOOM.
•
•
Select 1
Select 2
29
DVD/CD Operation Guide
31
Features of DVD on this Product
High picture quality
• 10 bit video D/A converter
Reproduces fine images faithfully.
• An array of picture quality modes yielded by digital processing
Signal deterioration is kept to minimum by processing the data digitally.
This feature can be used to tailor picture quality for DVD playback.
High sound quality
• 96 kHz/24 bit audio D/A converter
This player enables 96 kHz/24 bit linear PCM signals, the highest specifications in DVD standards, to be reproduced faithfully. To
support 96 kHz sampling/24 bit sound, the shaping noise of this multilevel digital sigma type D/A converter is kept flat up to 44 kHz,
thus preventing the audio signals from being affected in any way. This means sound is reproduced faithfully.
• Dolby Digital/dts (digital theater systems) digital output (See pages 45, 47.)
By connecting a Dolby Digital/dts decoder or an amplifier incorporating a Dolby Digital/dts decoder, you can enjoy high quality digital
surround sound from Dolby Digital/dts discs.
Graphical User Interface (GUl) screen (See pages 44 to 47.)
By simply pressing the DISPLAY button on the remote control, information on the DVD/Video CD/CD player and disc can be displayed
on the TV screen for easy identification. The player’s operations and settings can be easily accessed by operating the remote control
while monitoring the TV screen. The color and position of the GUl screen can be changed.
Versatile DVD features
• Multi-audio function (See pages 42, 45, 49.)
The audio soundtrack can be heard in up to 8 languages. (The number of languages depends on the software.)
Multi-subtitle
function (See pages 43, 45, 49.)
•
Subtitles may be displayed in one of 32 languages. (The number of languages depends on the software.)
• Multi-angle function (See pages 43, 45.)
This function allows you to choose the camera angle of scenes shot from different angles. (Limited to DVDs recorded with multiple
camera angles.)
• Parental lock function (See page 50.)
This function can prevent playback of DVD software which may be unsuitable for some audiences (especially for children). (Limited to
DVDs encoded with specific rating level.)
Disc formats supported by this player
The player can playback discs bearing
any of the following marks:
DVD
Video CD
CD
[8 cm disc/ 12 cm disc]
NTSC
[8 cm disc/ 12 cm disc]
NTSC
[8 cm disc/ 12 cm disc]
Discs which cannot be played with this player
• DVD with Region No. other than “1” or “ALL”
• CVD
• DVD-R/DVD-RAM
• SVCD
• CD-ROM
• VSD
• DVD + RW etc.
• DVD-ROM
• CDV
• DVD-AUDIO
• CD-G
• CD-RW
• Divx Video Disc
• Do not try to play Photo CD or CD-R. (Data on the disc may be damaged.)
Region Management Information
This player is designed to respond to the Region Management Information recorded on DVDs. The region number of this player is “1”.
If the region number described on the DVD does not correspond to the region number of this player, this player cannot play this disc.
This player will play DVDs made for “ALL” regions. This player will play DVDs marked with labels containing the region number “1” or
“ALL”:
Example:
1
32
or
ALL
Features of DVD on this Product
Enjoying digital audio output from the digital audio output connector
Optical digital audio output connector
Disc
DVD
Video CD
CD
Sound recording format
Optical digital audio output from connector
Dolby Digital
Dolby Digital bitstream (1–5.1ch) or PCM (2ch) (48 kHz/16 bit)*1 *2
Linear PCM (48/96 kHz 16/20/24 bit)
Linear PCM (2ch) (48 kHz sampling/16 bit only) or no output*1
dts
Dts bitstream (1–5.1ch)*1
MPEG 1
PCM (44.1 kHz sampling)*2
Linear PCM
Linear PCM (44.1 kHz sampling)
dts*3
Dts bitstream (1–5.1ch)*1
*1 The type of audio output from the connector can be selected by “7 Digital Audio Output” of the initial settings. (See page 52.)
*2 Compressed sound converted to PCM will be output.
*3 The settings and connections necessary to enjoy CDs recorded in dts are the same as for DVDs recorded in dts.
Note:
• Some dts decoders which do not support DVD-dts interface may not work properly with the DVD/Video CD/CD player.
For your reference:
• Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories, Inc. Supporting 5.1-channel surround
sound, as well as stereo (2-channel) sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc.
• The digital theater system (dts) is a 5.1-channel surround sound system, which is widely used in movie theatres around the world. It
allows the bit rate to be increased in order to provide good sound quality without excessively compressing the data.
• Linear PCM is a signal recording format used in a CD. While a CD is recorded in 44.1 kHz/16 bit, a DVD is recorded in 48 kHz/16 bit
up to 96 kHz/24 bit.
• If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide
full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.
• The digital audio output connector (optical) converts electrical signals into optical signals and transfers them to an amplifier. These
optical signals are immune from electrical interference, and they also have minimal effect on other equipment.
Caution for the optional digital audio output connector:
• Do not connect to the digital audio input of an amplifier that does not have Dolby Digital/dts/MPEG audio decoder.
• If such an amplifier should be connected to the player with “Bitstream” selected at the “2 Dolby digital”, any attempt to play DVDs
(or CDs recorded in dts) may cause such a high level of noise that it may be harmful to your ears and damage your speakers.
• Video CDs and CDs can be played as they would normally be played.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater
Systems, Inc. © 1996 Digital Theater Systems, Inc. All rights reserved.
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098 and 4,907,093 licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
33
Location of Controls for DVD Operation
Switches angles when scenes taken from
several angles are being played.
(See page 43.)
Used to eject DVD or CD.
EJECT DISPLAY
Turns the power ON and OFF
when the power on the TV is
ON.
Displays the menu for discs
with several titles recorded.
(See page 37, 39.)
POWER
NU
ANGLE
E
PM
TO
D
ME VD
NU
ENTER
TV
MENU
RETURN
STOP
PAUSE
ASPECT TV/VIDEO
SLEEP
Displays the menu for DVDs
with several menus.
(See page 37, 39.)
Used to make selections,
SELECT Key adjustments
and settings. (See page 13.)
SLOW/SEARCH
SKIP
Searches the beginning of a
scene or song. (See page 38.)
Stops operation of disc.
(See page 37.)
Pauses movies and music or
forwards frames.
(See page 38.)
Displays disc information and
settings when pressed during
play. (See pages 40 to 47.)
CH
PLAY
MUTE
For fast forwarding and rewinding or slow play.
(See page 38.)
Plays the disc.
(See page 36.)
VOL
SURROUND
Select sound field.
(See page 40.)
Used to select menus, songs,
set time and input passwords.
CANCEL
REPEAT MODE A-B REPEAT PLAY MODE
Selects groups.
(See page 41.)
R-TUNE
34
Selects still pictures and
play modes.
PLAY MODE : CD ONLY.
(See page 41.)
Functions of front operation panel
Stand-by : Red
Power ON : Green
(See page 11.)
POWER switch Turns power
ON and OFF.
(The remote control can be
operated when this is ON)
Remote control sensor
Disc slot (Slot in loading).
(See page 36.)
ASPECT button (See page 21.)
TV/VIDEO button
Plays DVD/CD discs.
(See page 36.)
Pauses or stops play of DVD/
CD discs.
LCD display
(11 inch wide-screen)
Stops operation of disc.
(See page 37.)
Skip forwards DVD/CD discs
and skips scenes during play.
(See page 38.)
Rewinds DVD/CD discs and
skips backwards scenes
during play. (See page 38.)
EJECT button
SLEEP timer button
(See page 12.)
VOLUME up (+)/
down (-) button
(See page 12.)
Channel up ( )/down (
(See page 12.)
) button
35
Basic play
EJECT DISPLAY
POWER
U
EN
PM
TO
ANGLE
D
ME VD
NU
ENTER
TV
MENU
Before enjoying DVD/Video CD/CD
The On-Screen menu language of your player has been factory preset to
English.
You can change the menu language to French or Spanish. Refer to
“Selecting On-Screen Display menu language” on page 52.
In the explanations given below it is assumed that English has been
selected as the menu language.
RETURN
SLOW/SEARCH
SKIP
STOP
PAUSE
To play
PLAY
POWER to switch on the power.
1 Press
(See page 34, 35.)
ASPECT TV/VIDEO
SLEEP
CH
MUTE
2 Insert DVD to play.
NO DISC
VOL
the disc in the disc slot with the label side to be played facing
3 Place
frontwards. (If the disc has a label)
Hold the disc without touching either of its surfaces, position it with the
label side to be played facing frontwards, align it with the guides, and
place it in position.
DVD
READING
• When you insert a DVD or CD, loading will be carried out automatically
and reading of the track of DVD or CD will begin.
4 Press PLAY to display the following:
• When a menu screen appears on the TV.
In the case of many movie DVDs, an interactive DVD, or a Video CD with
playback control, a title screen appears on the TV. Perform step 5 to start
play.
(Example of DVD)
5 Press SELECT (
,
,
,
) button to select the title and press ENTER.
(Example )
Play of the selected title now begins.
36
Basic play
When the menu continues onto another screen
).
After step 3 on page 36, press SKIP (
To
return
to
the
previous
menu
screen
Press
SKIP (
•
(
Due
to
the
design
of
some
software
titles,
SKIP
,
•
of the disc concerned.
)
) may not always work. For operation, refer also to the jacket
Stopping play and returning to the menu screen
Press DVD MENU or TOP MENU.
Play is suspended, and the menu screen is displayed.
• The buttons may not work depending on the disc used.
After operation
When the player is not in use, remove the disc and press POWER to set the player to the standby mode.
What is playback control?
If a Video CD has “playback control” written on its disc or jacket, it means that particular scenes or information can be
selected for viewing interactively with the TV monitor using the menu screen.
Note:
• The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item.
When no further selections are to be played, be sure to press STOP to clear the menu display.
For your reference:
• When appears on the screen when a button is pressed, the operation is prohibited by the player or disc.
Stopping play
Press STOP during play.
RESUME function
The player records the point where STOP was pressed during play.
• Press PLAY again, and play will resume from this point.
• When the tray is opened or STOP is pressed again, the RESUME function will be cleared.
This feature remains active if the player is set to the standby mode and then turned back ON.
Notes:
• Cancelling the RESUME function will also clear the chapter review function.
• The chapter review function may not work with some DVDs.
• The DVD/CD disc may feel warm when removed from the product, however, this will not affect the quality or efficiency of
the disc.
37
Basic play
Skipping chapters or tracks
OPEN
CLOSE DISPLAY
POWER
NU
ANGLE
E
PM
TO
D
ME VD
NU
Press SKIP (
) during play.
,
With the remote control
On the TV SET
SKIP
ENTER
TV
MENU
Reverse
RETURN
SLOW/SEARCH
SKIP
Forward
Reverse
Forward
For your reference:
• A chapter (DVD) or a track (Video CD/CD) is skipped each time the button
is pressed.
• When SKIP (
STOP
PAUSE
PLAY
•
ASPECT TV/VIDEO
SLEEP
CH
) is pressed once midway through a chapter/track, play
returns to the start of that chapter/track. When it is pressed again, a chapter/
track is skipped each time the button is pressed.
When SKIP (
,
) is pressed during menu play of Video CDs with
playback control, a menu screen may sometimes be recalled.
MUTE
VOL
SURROUND
Still picture (Pause)
Press PAUSE (
) during play.
STILL
• DVD/Video CD: The player will be placed in the still
• CD:
CANCEL
picture mode.
The player will be placed in the
pause mode.
• Normal play is resumed when PLAY is pressed.
(DVD)
PAUSE
REPEAT MODE A-B REPEAT PLAY MODE
(CD)
Rapid advance (Rapid reverse)
Press SLOW/SEARCH (
,
) during play.
SLOW/SEARCH
Reverse Forward
(Example)
• The speed of advance (reverse) is relatively slow at first. When the button
is pressed again, the speed increases up to 5 steps.
• Normal play is resumed when PLAY is pressed.
For your reference:
• When SLOW/SEARCH ( , ) is used during menu play of Video CDs
with playback control, a menu screen may sometimes be recalled.
• For DVDs and Video CDs, audio will be heard during scanning (forward
direction only) at the initial scan speed. For CDs, audio will be heard during
scanning at every scan speed (1 to 5). (For dts CDs, audio will not be
heard at any speed.)
38
Basic play
Frame advance (Frame reverse)
[DVD/Video CD]
1 Press PAUSE button.
( ,
2 Press:SELECT
Reverse
Using a TOP MENU [DVD]
Some movie discs may have two or more titles. If the disc
has a title menu recorded on it, pressing TOP MENU shows
the title menu screen. (The details of operation depend
on the disc used.)
) in the still picture mode.
: Forward
The
disc
is advanced (reversed) by one frame each time
•
the SELECT ( , ) is pressed.
• When the SELECT ( , ) is kept pressed, consecutive
frame advance (reverse) works.
Normal
play is resumed when PLAY is pressed.
•
Note:
• For Video CDs, frame reverse is not possible.
For your reference:
• Pressing PAUSE also activates frame advance.
• Whether the pictures are advanced by a “Frame” or
“Field” is automatic.
Slow-motion play [DVD/ Video CD]
1 Press PAUSE button.
SLOW/SEARCH (
2 Press
mode.
,
) in the still picture
SLOW/SEARCH
Reverse Forward
(Example)
The
speed
of
slow-motion
is
slow
at
first.
When
the button
•
is pressed again, the speed increases up to 4 steps.
• Normal play is resumed when PLAY is pressed.
Note:
• For Video CDs, slow-motion playback in reverse direction
is not possible.
TOP MENU during play.
1 Press
A list of the titles on the disc is
now displayed.
(Example )
• Pressing TITLE again resumes play from the scene when
TITLE was first pressed.
SELECT ( , , , ) button to select the
2 Press
item and press ENTER or PLAY.
The selected title now starts playing.
(Example )
Using a DVD MENU [DVD]
Some DVDs have unique menus. These menus can be
for language selection, audio output selection and/or
subtitle language selection, etc. Although the DVD menu’s
contents and operation differ from disc to disc, the following
explains basic operation when this feature is used:
1 Press DVD MENU during play.
The DVD menu available on the
disc is now displayed.
(Example)
• Pressing DVD MENU again resumes play from the scene
when DVD MENU was first pressed.
Cancelling playback control [Video CD]
1 Press STOP after the menu screen appears .
the numeric buttons to select a track.
2 Press
(Play begins.)
• Refer to the jacket etc. of the disc concerned for the
track numbers.
Press
“1” to start play from the beginning of the disc.
•
SELECT ( , , , ) button
2 Press
and then press ENTER, or press
the numeric buttons, to select the
item.
The selected title now starts playing.
(Example)
When the menu continues onto another screen
Repeat step 2.
To return to menu play
Press STOP to stop playback and press DVD MENU.
39
Basic play
Random play [ CD ]
EJECT DISPLAY
POWER
T
M
OP
EN
U
ANGLE
D
ME VD
NU
Using PLAY MODE button
PLAY MODE button in the stop mode.
1 Press
The program Random play screen appears on
ENTER
TV
MENU
Two way setting method for Random Play. (1.From play mode, 2.From display
mode)
The player plays the tracks on the disc in random order.
the screen.
RETURN
SLOW/SEARCH
SKIP
STOP
PAUSE
PLAY MODE button again, the Random
2 Press
play screen changes “OFF” to “ON”.
MUTE
CH
VOL
SURROUND
DISPLAY button and
1 Press
display Random play screen.
SELECT ( , ) to select
2 Press
Random Play.
3 Press SELECT ( , ) button.
ON
R-TUNE
14 14
1 214 00 00 00
01
OFF
OFF NORMAL
OFF
Selecting sound field
CANCEL
REPEAT MODE A-B REPEAT PLAY MODE
10 14
(Example )
Using GUI screen
SLEEP
ON
PLAY
08 14
ASPECT TV/VIDEO
OFF
Two way setting method for Sound field.
Using GUI screen
1
SELECT (
2 Press
sound field.
3 Press SELECT (
12
OFF NORMAL
Press DISPLAY button and
display sound field screen.
,
) to select
, ) button.
NORMAL
LIVE
MOVIE
CONCERT
Using SURROUND button
NORMAL
During playback of disc, each time the
SURROUND button is pressed, the
sound field changes as shown below.
SURROUND OFF
NORMAL
SURROUND OFF
40
NORMAL
SURROUND ON
LIVE
LIVE SOUND
MOVIE
MOVIE SOUND
CONCERT
CONCERT SOUND
Basic play
Repeat play
Repeat viewing (Listening)
Press REPEAT MODE during play.
Each time this button is pressed, the TV monitor changes as shown below and the disc will repeat a chapter, a title (DVD)
or a track (Video CD/CD)
• DVD
• Video CD / CD
Normal play
Normal play
Repeat of chapter
being played
C
Repeat of title being
played
T
Cancel repeat mode
(Normal play)
OFF
Repeat of track
being played
Repeat of entire
disc contents
Cancel repeat mode
(Normal play)
T
A
OFF
To return to normal play
Press REPEAT MODE until “ OFF ” is displayed.
Notes:
• Repeat play may not work correctly with some DVDs.
• Repeat play does not work with an interactive DVD or during menu play of a Video CD with playback control.
A-B repeat play
Repeating sections between two specific points ( A-B repeat )
1 Press A-B REPEAT during play at the point where repeat play is to start (A).
A
2 Press A-B REPEAT at the point where repeat play is to be concluded (B).
AB
Repeat play of the section between points A and B starts.
To return to normal play
Press A-B REPEAT until “
” is displayed.
Notes:
• A-B repeat play does not work with an interactive DVD.
• Some subtitles recorded around point A or B may fail to appear (DVD).
• A-B repeat play works only within a title (DVD) or a track (Video CD/CD).
For your reference:
• The end of a track or title is automatically determined as point B.
41
Changing audio soundtrack language [ DVD ]
EJECT DISPLAY
POWER
P
TO
ME
NU
ANGLE
D
ME VD
NU
It is possible to change the audio soundtrack language to a different language
from the one selected at the initial settings if available. (See page 49.)
This operation works only with discs on which multiple audio soundtrack
languages are recorded.
1
ENTER
TV
MENU
RETURN
SLOW/SEARCH
SKIP
STOP
PAUSE
2
Press DISPLAY during play to display the disc information.
The program playback screen appears on the TV monitor.
• When no audio soundtrack is recorded, “–” will be displayed instead of
the language number.
01 12 01 05 00 00 00
1 ENG 2 0
Press SELECT ( , ) to select
soundtrack language.
Hello
PLAY
Number of the audio soundtrack
language being played back
ASPECT TV/VIDEO
SLEEP
CH
MUTE
VOL
3 Press SELECT (
,
) to select the language.
Pressing the numeric buttons also changes the audio soundtrack
language.
SURROUND
01 12 01 05 00 00 00
2 FRA 2 0
Bonjour
• Press DISPLAY to clear the display.
CANCEL
REPEAT MODE A-B REPEAT PLAY MODE
R-TUNE
42
For your reference:
• When the preferred language is not selected, even after pressing the
SELECT ( , ) button several times, it means that language is not
available on the disc.
When
the power is turned on, or the disc is removed, the language heard is
•
the one selected at the initial settings. If this language is not recorded on the
disc, only the available language on the disc will be heard.
Changing subtitle language [ DVD ]
It is possible to change the subtitle language to a different language from the one selected at the initial settings if available.
(See page 49.)
This operation works only with discs on which multiple subtitle languages are recorded.
1 Press DISPLAY button to display the player information.
01 12 01 05 00 00 00
1
2 0
1
ENG ON
• When no subtitles are recorded, “– –” will be displayed
instead of the language number.
Number of the audio soundtrack language
being played back
2 Press SELECT (
3 Press SELECT (
,
,
I love you
) to select SUBTITLE language item.
) to select the language.
01 12 01 05 00 00 00
1
2 0
2
FRA ON
Pressing the numeric buttons also changes the subtitle language.
4
,
Press SELECT (
) to select “ON OFF” item.
Je t'aime
5 Press SELECT (
,
) to select subtitle “ON” or “OFF”.
To clear/display the subtitles
Press the RETURN button to clear the display.
For your reference:
• When the preferred language is not selected, even after pressing the SELECT ( , ) several times, it means that
language is not available on the disc.
When
the power is turned on, or the disc is removed, the language heard is the one selected at the initial settings. If this
•
language is not recorded on the disc, only the available language on the disc will be heard.
Viewing from another angle [ DVD ]
Some DVDs contain scenes which have been shot simultaneously from a number of different angles. For these discs, the
same scene can be viewed from these different angles with the ANGLE button. (The angles depend on the disc used.)
1 Press ANGLE during play.
Number of angle
being played back
SELECT ( , ) to select the angle.
2 Press
Pressing the numeric buttons also changes the angle.
13
33
• Press ENTER to clear the display.
Note:
• This function only works for titles having scenes recorded at different angles.
43
General information about GUI screens
This player features GUI (Graphical User Interface) screens
providing various functions. A “banner” will be displayed on the
TV when DISPLAY button on the remote control is pressed.
Operating the SELECT/ENTER button on the remote control will
show disc information (title/chapter/track number, elapsed playing
time, audio/subtitle language, and angle) and player information
(repeat play, A-B repeat play, play mode, etc.). Some icons allow
the settings to be changed.
EJECT DISPLAY
POWER
U
EN
PM
TO
D
ME VD
NU
ANGLE
ENTER
TV
MENU
RETURN
SLOW/SEARCH
SKIP
STOP
PAUSE
PLAY
Common procedures
ASPECT TV/VIDEO
SLEEP
MUTE
1 Press DISPLAY during play or in the stop mode.
VOL
CH
Each time this button is pressed, the TV monitor changes as
shown below.
GUI screen for selecting disc information
SURROUND
GUI screen for selecting player information
GUI screen is cleared
• Some functions cannot be accessed from the stop mode.
CANCEL
REPEAT MODE A-B REPEAT PLAY MODE
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
DVD
2 Press the SELECT (
,
) button to select the item.
• The currently selected item is indicated by the yellow frame
on the GUI screen.
FULL
DVD/CD
3 Press the SELECT (
•
01 12 01 05 00 00 00
1
2 0
•
12
OFF NORMAL
Video CD
) button to select the setting.
For some functions, the setting will be registered
immediately; for others, ENTER or PLAY must be pressed.
When numbers are displayed (e.g. title No.), the numeric
buttons are also effective for setting instead of the SELECT
( , ) button. When numbers are entered with numeric
buttons, press ENTER to register the setting.
Press RETURN to clear the GUI screen.
FULL
DVD/CD
01 14 00 00 00 L R OFF
Examples of GUI screens
See
,
and
for detailed illustration.
The screens depend on the disc contents.
OFF NORMAL
For your reference:
• The GUI screens may not be displayed when playing some
kinds of DVD software.
CD
FULL
01 14 00 00 00
44
,
DVD/CD
OFF
OFF NORMAL
General information about GUI screens
Screen for disc information (For DVD)
Title No.
Change the title No. with time SELECT (
Elapsed playing time
(hour: minute: second)
LPCM
Audio
attribute
Digital
DTS
1
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
96k
or
48k
16b
20b
24b
,
) button or the numeric buttons.
Press ENTER during to store location A and press ENTER again
to store location B. Repeat play between the two locations starts.
Press ENTER again to return to normal play.
12
2 0
Change the No. with the SELECT
( , ) button or the numeric buttons.
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:
SVE:
NOR:
DAN:
) button or the numeric buttons and press ENTER.
Change the No. with the SELECT (
A-B repeat play
(See page 41.)
01 12 01 05 00 00 00
,
Change the time with the numeric buttons and press ENTER.
Example: To specify “1 hour 10 min. 37 sec.”, enter “11037”.
(This function does not work with some discs.)
Angle No.
(See page 43.)
Audio soundtrack
language
) button or the numeric buttons and press ENTER.
Change the chapter No. with the SELECT (
Chapter No.
Audio soundtrack
language No.
(See page 42.)
,
POR:
RUS:
JPN:
CHI:
KOR:
MAL:
VIE:
THA:
:
*
Portuguese
Russian
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Other
Linear PCM
(“k” stands for kHz
and “b” stands for bit.)
1ch–3/2.1ch*
Dolby Digital
–
dts surround
Example:
3/2.1ch
0: No low frequency effect (for subwoofer)
1: Low frequency effect (for subwoofer)
OFF NORMAL
Select the mode during play with the
SELECT ( , ) button.
Repeat play
(See page 41.)
Sound field
OFF
Normal play
C
Chapter repeat play
T
Title repeat play
Select the mode during play with the
SELECT ( , ) button.
When sound quality is selected, playback
is done with that effect.
NORMAL: Normal sound quality
LIVE: Sound quality like a live performance
MOVIE: Sound quality like a movie theater
CONCERT: Sound quality like a concert hall
Subtitle language No.
(See pages 54.)
Change the No. with the SELECT
( , ) button or the numeric buttons.
Sub language
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:
SVE:
NOR:
DAN:
0: No Surround
1: Mono Surround
2: Stereo Surround (left/right)
1: Center
2: Front left + Front right
3: Front left + Front right + Center
DVD
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
POR:
RUS:
JPN:
CHI:
KOR:
MAL:
VIE:
THA:
:
*
Portuguese
Russian
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Other
Select “ON” or “OFF” with the
SELECT ( , ) button.
Subtitle on/off
OFF
Subtitles cleared.
ON
Subtitles displayed.
• The GUI screen display indicates the number of channels recorded on the disc.
Notes:
• Repeat play does not work with an interactive DVD or during menu play of a Video CD with playback control.
• A-B repeat play does not work with an interactive DVD.
• It is not possible to change the play mode using the GUI screen.
For your reference:
• “ , ” around the icon means that the item can be changed with the SELECT (
,
) button.
03 12
45
General information about GUI screens
Screen for disc information (For Video CD/CD)
Change the Track No. with the SELECT (
Track No.
Elapsed playing time
(minute: second)
,
) button or the numeric buttons and press ENTER.
Display is changed with the SELECT ( , ) button.
Elapsed playing time
Remaining time of the track
Remaining time of the disc
This function works with the following discs:
• CDs
• Video CDs with playback control when menu play is cancelled
(Press STOP while the menu screen is displayed.)
• Video CDs which do not support playback control (Ver 1.1)
Random play
(See page 40.)
1. Select the random play setting menu.
2. Press the SELECT ( , ) button to selection, and press ENTER button.
A-B repeat play
(See page 41.)
Press ENTER during to store location A and press ENTER again to store
location B. Repeat play between the two locations starts. Press ENTER
again to return to normal play.
(VIDEO CD)
(CD)
01 14 00 00 00
OFF
OFF NORMAL
01 14 00 00 00 L R OFF
Select the mode during play with the
SELECT ( , ) button.
Repeat play
(See page 41.)
OFF
Normal play
T
Track repeat play
A
Disc repeat play
Video
CD/
CD
Sound field
Change the mode with SELECT
( , ) button.
Audio mode
(Video CD only)
LR
Left channel sound is output
from the speaker (L),
and right channel sound
from the speaker (R).
L
Left channel sound only is
output.
R
Right channel sound only is
output.
Playback
controls
OFF NORMAL
Select the mode during play with the
SELECT ( , ) button.
When sound quality is selected, playback
is done with that effect.
NORMAL: Normal sound quality
LIVE: Sound quality like a live performance
MOVIE: Sound quality like a movie theater
CONCERT: Sound quality like a concert hall
• Selection cannot be done with DTS/DTS CD.
• With a video CD, selection is only
possible when the audio mode is LR.
OFF
Menu play is off.
ON
Menu play is on.
Notes:
• Track No. and the elapsed playing time are not displayed during menu play of Video CDs with playback control.
• It is not possible to turn playback control ON or OFF using the GUI screen.
• Repeat play does not work with an interactive DVD or during menu play of a Video CD with playback control.
• A-B repeat play does not work with an interactive DVD.
• It is not possible to change the play mode using the GUI screen.
For your reference:
• “ , ” around the icon means that the item can be changed with the SELECT (
46
,
) button.
03 12
GUI screen reference chart
Disk information screen
02 12
Title no. (DVD)
Track no. (CD, video CD)
When you select a no. and press [Set], playback of that title/track begins.
(Selection can also be made using the numerical buttons)
02 05
Chapter no.
(DVD)
When you select a no. and press [Set], playback of that chapter beings.
(Selection can also be made using the numerical buttons)
Elapsed time
(DVD)
If you designate the time for starting playback with the numerical buttons,
playback begins from that time.
Example: To start playback after 1 hour, 6 minutes and 37 seconds,
➡ ➡ ➡ ➡ ➡ press [Set].
Time display
(CD, video CD)
During playback, this changes the display each time [ ] or [ ] is pressed.
Track elapsed time
Track remaining time
Disc remaining time
Audio information
(DVD)
When a no. is selected, playback begins with that audio.
(1) Audio language allocated to no. (See page 45)
(2) Audio attributes allocated to no. (See page 45)
00 00 00
1
2 0
(1)
(2)
Audio mode
switching (Video CD)
ON
When a channel is selected, playback is done with that audio.
Subtitle no.
(DVD)
When a no. is selected, subtitles are displayed in that language.
(1) Subtitle language allocated to no. (See page 45)
(2) Select subtitle "On" or "Off".
Playback control
(Video CD)
This displays the "On" "Off" state of menu playback. (Content cannot be
changed).
Angle no.
When a no. is selected, playback is seen from that angle.
(1) (2)
ON
12
Audio attributes
• LPCM /
Digital / DTS :Signal type
• k :Sampling frequency
• b :Number of bits
• ch :Number of channels
Information screen for this device
Playback is repeated between the designated 2 points. Each time [Set] is
pressed during playback, the setting cycles are as indicated below.
AB
OFF
NORMAL
OFF
Repeat
playback
between
A and B
Repeat
playback
Designate A point
Designate B point
Return to normal playback
(A–B repeat playback begins)
• This is only possible in the same chapter (same title if there are no chapter
divisions) (DVD), or the same track (video CD, music CD).
• If the chapter(title)/track ends before the end point B is designated, the start
point A is cancelled.
When the playback type is selected, repeat playback begins.
• For DVD
• For CD, video CD
OFF
(Chapter) (Title) (Normal playback)
OFF
(Track) (Entire disk) (Normal playback)
Sound field
When sound quality is selected, playback is heard with that effect.
NORMAL: Normal sound quality
LIVE: Sound quality like a live performance
MOVIE: Sound quality like a movie theater
CONCERT: Sound quality like a concert hall
• Selection cannot be done with DTS/DTS CD.
• With a video CD, selection is only possible when the audio mode is LR.
Random playback
(CD)
Select "On" "Off" for random setting.
If "On" is selected, random playback is used for playback.
47
Initial settings
Once the intial settings have been completed, the player can always be
operated under the same conditions (especially DVDs).
The settings will be retained in the memory, until the settings are changed,
even after switching to standby mode.
OPEN
CLOSE DISPLAY
POWER
D
ME VD
NU
ANGLE
U
P
TO
N
ME
Common procedures
ENTER
TV
MENU
1
2
RETURN
SLOW/SEARCH
SKIP
STOP
PAUSE
PLAY
Press TV MENU to display menu screen during stop mode.
Press SELECT (
,
) button to select SET UP.
MENU
ADJUST
SET UP
ENTER
PAGE
ASPECT TV/VIDEO
LANGUAGE
MUTE
RETURN
SELECT
PROGRAM CH
CH
SLEEP
DVD SET UP
VOL
INPUT LABEL
OTHER ADJUST
SURROUND
3
Press SELECT (
ENTER.
,
) button to select DVD SET UP, and press
MENU
ADJUST
SET UP
ENTER
CANCEL
PAGE
LANGUAGE
REPEAT MODE A-B REPEAT PLAY MODE
RETURN
SELECT
PROGRAM CH
DVD SET UP
R-TUNE
INPUT LABEL
OTHER ADJUST
4
Press SELECT (
,
,
,
) button to select the menu setup.
Each screen for setting the value is displayed.
DISC MENU
VIDEO MENU
SETUP
DISPLAY MENU
SETUP
DISC
AUDIO
VIDEO
TV ASPECT
ENGLISH
SETUP
DISPLAY
MENU LANGUAGE
ENGLISH
16 : 9
SUBTITLE
MENUS
ENTER
RATINGS
D. RANGE COMPRESS.
STANDARD
POS 1
ENTER
OSD MESSAGES
ENGLISH
RETURN
AUDIO
DIGITAL AUDIO OUT
OFF
OSD POSITION
ENGLISH
ENTER
AUDIO MENU
SETUP
ENTER
ON
RETURN
RETURN
AUDIO DURING SRCH
ON
RETURN
LEVEL 8
(See pages 49 to 51)
48
(See page 51)
(See page 52)
(See pages 52, 53)
Initial settings
DISC MENU
These settings allow you to choose the languages used when a DVD is played.
If the language selected is not available on the disc, the language designated by each disc will be selected. There
are cases where the selected language recorded by the disc designates another language.
Press the SELECT (
,
) button to select DISC menu and to set following steps.
Selecting AUDIO language [DVD]
1
Press the SELECT (
SETUP
,
) button to select AUDIO and press ENTER button.
AUDIO
ENGLISH
The language is selected.
FRENCH
SPANISH
ENTER
RETURN
2
ORIGINAL
The original language of each disc will be selected.
OTHER 0
Another language can be selected.
(Refer to the language codes on page 54.)
Press the SELECT (
,
) button to select item and press ENTER button.
• Press CANCEL if an incorrect language code is entered.
Selecting SUBTITLE language [DVD]
1
Press the SELECT (
,
) button to select SUBTITLE and press ENTER button.
AUTOMATIC:
SETUP
SUBTITLE
AUTOMATIC
ENGLISH
FRENCH
Subtitle language will automatically be selected in
accordance with the audio soundtrack language.
(Factory preset)
• If the language selected for the “AUDIO” is actually
used during playback, the subtitles will not appear.
• If another language is used during playback, the
subtitles will appear in the language selected at
the setup “AUDIO”.
ENGLISH / FRENCH / SPANISH: The language is selected.
ENTER
SPANISH
RETURN
2
OTHER 0
Press the SELECT (
,
OTHER 0:
Another language can be selected.
(Refer to the language codes on page 54.)
) button to select item and press ENTER button.
• Press CANCEL if an incorrect language code is entered.
49
Initial settings
■ Selecting MENUS [DVD]
1
Press the SELECT (
SETUP
,
) button to select MENUS and press ENTER button.
MENUS
ENGLISH
ENGLISH:
English is selected. (Factory preset)
FRENCH
FRENCH / SPANISH: The language is selected.
SPANISH
ENTER
OTHER
OTHER 0:
0
RETURN
2
Press the SELECT ( , ) button
to select item and press ENTER.
Another language of each disc will be selected.
(Refer to the language codes on page 54.)
Notes:
If the language selected is not available on the disc, the language
designated by each disc will be selected.
Press CANCEL if an incorrect language code is entered.
Press return to the previous screen, press RETURN button.
•
•
•
■ Selecting RATINGS [DVD]
This feature is used to disable the playing of some DVDs which are unsuitable for some audiences, for example,
children.
Some DVDs are encoded with a specific rating level. If the rating level of the disc is higher than that preset in the
initial settings operation, playback of the disc will be prohibited.
Press the SELECT ( , ) button to select RATINGS and press ENTER button.
•
1
SETUP
RATINGS
ENTER A 4 - DIGIT
PASSWORD.
THEN PRESS ENTER.
Input a 4-digit password with the numeric buttons and
press ENTER button.
• Do not forget your password.
• Factory setting : 1111
ENTER
RETURN
2
Press the SELECT (
,
) button to select the level and press ENTER button.
Setting is finished and the initial settings screen is displayed.
• The rating is locked. Any discs with a higher rating than the setting cannot be played back unless the password
is entered.
SETUP
ENTER
RETURN
50
RATINGS
8 NO LIMIT
7
6
5
4
3
2
1
Level 8:
All DVDs can be played.
(Factory preset)
Level 7 to 2:
DVDs for general audiences/children can be played.
(DVDs for adults are prohibited.)
Level 1:
DVDs for children can be played.
(DVDs for adults/general audiences are prohibited.)
Initial settings
• Change the password
SETUP
Press the SELECT ( , ) button to select the CHANGE
1 PASSWORD
and press ENTER button.
RATINGS
CHANGE LEVEL
LEVEL 1
CHANGE PASSWORD
ENTER
RETURN
SETUP
2 Input new password and press ENTER button.
RATINGS
ENTER A NEW
4 - DIGIT PASSWORD.
THEN PRESS ENTER.
2222
ENTER
RETURN
SETUP
3 Press RETURN button to exit RATINGS menu.
RATINGS
REMEMBER THE
PASSWORD. OR YOU
CANNOT CHANGE
THE RATING LEVEL.
3333
ENTER
RETURN
VIDEO MENU
■ Setting TV screen aspect
Select the aspect, conventional size screen (4:3) or wide screen (16:9), when connecting to your TV set.
1
Press the SELECT (
,
) button to select VIDEO menu and press ENTER button.
SETUP
SETUP
VIDEO
TV ASPECT
TV ASPECT
16 : 9
16 : 9
4 : 3 LETTERBOX
4 : 3 PAN&SCAN
2
ENTER
ENTER
RETURN
RETURN
Press the SELECT ( , )
button to select aspect item
and press ENTER button.
"16:9": Select when a wide screen TV set is connected. (Factory preset)
Select this if the disc video type is 16:9. (For wide screen TV's,
set the screen mode to "Full".)
"4:3 LETTERBOX": Select when a conventional TV set is connected.
Wide video with an aspect ratio like 16:9 is played back
on the screen with black bands on the top and bottom.
"4:3 PAN&SCAN": Select when a conventional TV set is connected.
Wide video with an aspect ratio like 16:9 is played back
on the screen with either both sides or one side cut off.
• If Pan & Scan or Letterbox is designated
beforehand on the disc side, the disc designation
takes priority.
51
Initial settings
DISPLAY MENU
■ Setting on screen DISPLAY
1
2
Press the SELECT (
,
) button to select DISPLAY menu .
Press the SELECT (
,
) button to select each item and press ENTER button.
SETUP
MENU LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
ENTER
You can change the language used for the on screen display
menus.
ENGLISH: SELECTED as onscreen language.
FRANÇAIS: SELECTED as onscreen language.
ESPAÑOL: SELECTED as onscreen language.
RETURN
SETUP
SETUP
DISPLAY
MENU LANGUAGE
ENGLISH
OSD POSITION
POS 1
OSD POSITION
POS 2
POS 1
ENTER
OSD MESSAGES
ENTER
ON
RETURN
RETURN
SET
SETUP
UP
OSD MESSAGES
ON
OFF
ENTER
RETURN
POS 1: Display appears at the position on the top side of the
screen.
POS 2: Relative to "Position 1", the display appears at the
bottom.
(Select this for example, when part of the display is
missing.)
This is used to turn the display of functions like "PLAY" and
"STOP" on or off.
ON: Functions like "PLAY" and "STOP" are displayed on
the television screen.
OFF: Functions like "PLAY" and "STOP" are not displayed
on the television screen.
• To return to the previous screen, press RETURN button.
AUDIO MENU
■ Setting AUDIO [DVD]
1
2
Press the SELECT (
,
) button to select AUDIO menu .
Press the SELECT (
,
) button to select each item and press ENTER button.
SETUP
DIGITAL AUDIO
OUT
OFF
BITSTREAM
ENTER
LPCM
RETURN
SETUP
AUDIO
DIGITAL AUDIO OUT
OFF
D. RANGE COMPRESS.
STANDARD
ENTER
See next page
AUDIO DURING SRCH
ON
RETURN
See next page
Digital audio output setting
• This is for selecting the type of digital audio signal output from
the optical digital audio output terminal of this device,
according to the connection method with other equipment.
OFF: For analog connection of audio output ➠ Set to "OFF".
BITSTREAM: When connecting with digital equipment with a
built-in Dolby digital decoder or DTS decoder ➠
Set to "BITSTREAM".
LPCM: When connecting with digital equipment without a built-in
Dolby digital decoder or DTS decoder ➠ Set to "LPCM".
When playing back a DVD recorded at LPCM 96 kHz using 96 kHz
sampling, perform analog connection by setting to "OFF". Optical
digital output is not compatible in this case. (When "BITSTREAM" or
"LPCM" is selected, downsampling to 48 kHz is done for both optical
digital output and analog output.)
CAUTION:
• When performing digital connection with equipment without a
built-in Dolby digital decoder or DTS decoder, be sure to set
to "LPCM".
• If setting is not done correctly, noise will be generated, and
this may hurt your ears or damage speakers.
• To return to the previous screen, press RETURN button.
52
Initial settings
■ Setting AUDIO [DVD]
1
2
Press the SELECT (
,
) button to select AUDIO menu .
Press the SELECT (
,
) button to select each item and press ENTER button.
Previous page
SETUP
Setting for dynamic range control
This is for selecting the DVD dynamic range (difference
between high and low volume).
• This setting works only with DVD discs recorded in Dolby digital.
STANDARD: Set this to listen with a range equivalent to a
normal television.
MAX RANGE: Set this to listen with the range recorded on the disc.
MIN RANGE: Set this to listen with a smaller difference between
the maximum and minimum volume. (When you
want a powerful sound even at low volume, or when
you wish to moderate high volume, etc.)
D. RANGE
COMPRESS.
SETUP
STANDARD
AUDIO
DIGITAL AUDIO OUT
OFF
MAX RANGE
MIN RANGE
ENTER
D. RANGE COMPRESS.
STANDARD
RETURN
ENTER
AUDIO DURING SRCH
ON
RETURN
SETUP
Setting volume during fast forward
This sets whether or not to output audio during fast forward (2x
speed) of DVDs and video CDs.
ON: Audio is output during fast forward (2x speed).
OFF: Audio is not output during fast forward (2x speed).
• With a music CD, audio is output at all speeds during fast
forward and rewind, regardless of this setting.
AUDIO DURING
SEARCH
ON
OFF
ENTER
RETURN
• Press return to the previous screen, press RETURN button.
Intial setting condition of DVD SET UP menu
SETUP
MENUS
DISC
VIDEO
DISPLAY
AUDIO
ITEMS
CONTENTS OF SETTING
Ref.
page
AUDIO LANGUAGE
ENGLISH • FRENCH • SPANISH • ORIGINAL • OTHER 0
49
SUBTITLE LANGUAGE
AUTOMATIC • ENGLISH • FRENCH • SPANISH • OTHER 0
49
MENUS LANGUAGE
ENGLISH
50
RATINGS
LEVEL 8 (NO LIMIT) • LEVEL 1 to 7
50
PASSWORD
4 digit numeric ( 1111 Factory setting)
51
TV ASPECT
16 : 9
51
MENU LANGUAGE
ENGLISH
OSD POSITION
POS 1
OSD MESSAGES
ON
DIGITAL AUDIO OUT
OFF
D. RANGE COMPRESS.
STANDARD
AUDIO DURING SEARCH
ON
• FRENCH • SPANISH • OTHER 0
• 4 : 3 LETTERBOX • 4 : 3 PAN&SCAN
•
•
52
POS 2
52
OFF
•
•
• FRANÇAIS • ESPANÕL
52
BITSTREAM
•
•
LPCM
MAX RANGE
•
OFF
52
MIN RANGE
53
53
Intial setting (Factory setting)
53
Language code list
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or “MENUS”. (See pages 49, 50)
Code
Language
Code
Language
Code
Language
Code
Language
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laotian
8376
Slovenian
6570
Afrikaan
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
lrish
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Scots Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Galician
7775
Macedonian
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sundanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorssian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatianb
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajiki
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
lcelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Punjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Rmance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Romanian
8679
Volapük
6984
Estonian
7579
Korean
8285
Russian
8779
WoIof
6985
Basque
7587
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
54
How images appear on your TV (aspect ratios of the screen)
The Images on the TV screen depend on the type of software and the TV set.
Type of TV set (ASPECT mode)
Type of software
4:3
16:9 (“FULL” mode)
16:9 (“ZOOM” mode)
16:9 (“AUTO” mode)
Wide-screen
(pan and scan
format)
Right and left edges
are cut off.
Full screen
Top and bottom
edges are cut off.
Full screen
Software (4:3)
Full screen
Screen horizontally
enlarged
Top and bottom
edges are cut off.
Full screen
(with black bands at
right and left)
Screen horizontally
enlarged (with black
bands at top and
bottom)
Full screen
Screen in which the
picture at the far left
and far right ends only
is extended horizontally
(with black bands at
top and bottom)
Software
(4:3, Letterbox)
Letterbox
(with black bands at
top and bottom)
• The images which appear on the TV screen, and what each screen mode is called, depend on the manufacturer of
the TV set and type of TV set. Consult the instruction manual provided with your TV set.
For your reference:
Letterbox
Black bands are inserted at the top and bottom of the screen to fill in the gaps where the size of the picture is smaller
than the screen.
Pan and Scan
Part of the wide-screen picture (either at both sides or one side of the screen) is automatically eliminated so that the
picture fills the whole screen.
•
•
55
Troubleshooting
Before requesting service for this LCD/DVD combo, check the chart below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,
consult your dealer for instructions.
For TV broadcasts (VHF, UHF)
Symptom
Cause and remedy
Page
Power supply does not go on
• Is power supply plug unplugged from the outlet?
• If power will not go on with the remote control, is the power supply of the TV "Off"?
• Is battery exhausted, or is battery polarity wrong?
• Is the remote control receiver illuminated with strong light from a fluorescent
lamp etc.?
• Are you using the special-purpose remote control for this equipment? (The unit
–
13
• Is there deterioration, breakage or disconnection of the antenna or antenna wire?
• Is the antenna wire connected correctly?
• Is the system affected (by radio wave interference or induced electromagnetic
–
8, 9
Remote control cannot be
operated
will not operate with another remote control.)
Image shakes, or image is
unclear
There are spots on the picture,
or the screen shakes
The image appears doubled
or tripled
A color pattern appears, or
colors disappear
Only a certain channel looks bad
The channel number
disappears from the screen
waves) by external sources (automobiles or trains, high-voltage wires, neon,
motors, magnetized steel frame, or iron rain shutters, etc.)?
➠Turn off the power supply, and try changing the equipment setup location. If
that has no effect, separate magnet-proofing will be required.
• Is the antenna direction shifted?
• Are reflected electromagnetic waves being received from mountains or buildings?
• Is the equipment being affected by another TV (electromagnetic interference)?
➠Changing the TV setup location may lead to improvement.
•Is channel fine tuning correct?
• Has the screen display button been pressed?
➠Press the "Screen display button" again.
If the system is switched to external input and there is no external signal
video, the number will disappear.
7
–
–
–
–
–
–
19
When the image is not stable,
the screen turns completely
white for a moment
• This occurs when the signal for driving the liquid crystal is lost, and is not a
The screen goes dark
momentarily when the
channel is changed.
• The screen is darkened for a moment to conceal noise generated when changing
The TV makes a hissing
noise occasionally
• If the screen and audio are not abnormal, this sound is caused by slight expansion
–
The screen display shakes
with video input
• When input is switched to "video input", this may occur if there is no signal at the
10, 18
There are parts at the top
and bottom of the screen
where there is no image
• With video software wider than 16:9 (cinema vision size software etc.) there are
Top and bottom of picture
are missing after zoom
• Has the screen position adjustment been left shifted?
56
malfunction.
channels.
and contraction of the cabinet due to changes in room temperature. It has no
effect on performance.
video/audio input terminal.
parts at the top and bottom of the screen where there is no image.
➠Adjust the screen position.
–
–
21
24
Troubleshooting
For TV broadcasts (VHF, UHF)
Symptoms
Cause and remedy
Page
A black band appears momentarily
when selecting channels with video
• This is due to noise generated when changing channels.
–
In some parts color tint is poor,
and some parts are colored
• If a bright image (of white clothes, etc.) is stopped, it may be partially colored.
–
Both edges of the screen, or columns
or window frames, appear bent
• They may appear bent due to the received channel and the screen brightness.
–
The image from the connected
equipment does not appear
• Are plugs securely inserted into each terminal?
8-10
Parts of the screen are
missing with game software
• When set to self-wide or zoom screen, the top and bottom may be missing.
21, 24
The main unit is hot to the
touch
• The main unit radiates heat, so some parts of the console reach a high temperature.
This is not a problem for performance or quality.
• Set up at a location with good ventilation.
This is not a malfunction. This will disappear when the bright screen is gone.
This is not a malfunction.
➠Securely insert terminals all the way.
➠Using the screen mode, set to "Full" or "Normal".
–
Do not cover the ventilation holes of the console with anything (tablecloth, etc.),
and do not place on top of other equipment (like a video deck).
For DVD operation
Symptoms
Cause and remedy
When the playback button is
pressed, playback does not
begin, or it stops quickly
• Is there any condensation? (Let sit for 2–3 hours.)
• Have you inserted a disc other than a DVD, video CD or music CD?
• If the disc is dirty, wipe it clean.
• Insert correctly, with the label surface on the near side.
• When connected to an external amp, set DVD output to "Yes".
• Check connections and audio settings.
• There is no sound during pause, still picture, jog or slow playback.
• Operation may be forbidden, depending on the disc.
• If buttons do not operate at all, try turning the power supply button of the main
No sound, or sound is
strange
Buttons cannot be operated
unit "Off" and "On". The system may fail to operate correctly due to the effects of
lightning or static electricity, etc.
Screen messages do not appear
GUI screen display is cut off
The picture is disturbed
during fast forward or rewind
• Turn On "Screen message" in onscreen setting.
• Change the position of the GUI screen using "Onscreen display position" in onscreen setting.
• Some disturbance is normal. This is not a malfunction.
Playback does not start even
when a title is selected
• Some titles cannot be played back if viewing restrictions have been set.
The disc is hot when it is
removed
• This is not a problem for quality or performance.
Subtitles do not appear
• Subtitles are not recorded on the DVD.
• If the subtitle setting is "Off", set it to "On".
• The DVD does not have multiple languages.
The audio or subtitle
language cannot be selected
The angle cannot be
changed
• Even with a DVD, switching cannot be done at points where multi-angle is not
stored.
Page
–
–
–
48, 52
–
50, 51
–
45
45
43
57
Troubleshooting
For DVD operation
Symptoms
Cause and remedy
Page
The preset audio or subtitle
language does not appear
• The DVD does not have multiple languages.
45
The disc cannot be removed
• Is the child lock "On"?
20
Frequently asked questions (Q&A)
Q (Question)
A (Answer)
Page
• Almost all DVD discs have copy protection so recording is not possible.
• The region number indicates that the disc conforms to the DVD standard. Discs which
–
32
Can the spot light function and
real-time text function be used?
• They cannot be used with this equipment.
–
Sound volume seems lower
than TV or radio, etc.
• Dolby digital audio signals have a wide dynamic range (i.e., the range between high
–
Can I play back DVDs
purchased abroad?
• If the region number contains "ALL" or "1" and the format is NTSC, it can be played
–
Can I playback videos or
CDs purchased overseas?
• They can be played back if they are in NTSC format.
–
Can I play back CD-R,
DVD-R and DVD-RAM?
• No. (They are not compatible with this equipment.) If compatibility of other discs
Can I do video recording?
Can I playback discs with no
region number?
do not comply with the standard cannot be played.
and low volume) so in general volume seems to sound low.
back.
is unclear, check the disc logo.Some titles cannot be played back if viewing restrictions
have been set.
Maintenance
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in soap-and-water
solution or a weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came with
the cloth carefully.
Mild
detergent
CAUTION :
If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.
58
–
Specifications
Power Source
AC 120 V, 60 Hz
Power Consumption
Average use : 40 W (Maximum Current 2.5 A)
Stand-by condition : 0.8 W
LCD
TFT 11-inch, 16 : 9 aspect ratio, 854 × 480 dots, 409,920 pixel
Screen Size
9.63 ″ (244 mm) (W) × 5.41 ″ (137 mm) (H) × 11.04 ″ (280 mm) (DIAGONAL)
Channel Capability-181
VHF-12 ch : UHF-56 ch : Cable-125 ch
Sound
Speaker
1.57 ″ (4 cm) × 1.10 ″ (2.8 cm) 2pcs.
Audio Output
2 W [1 W + 1 W ] (10 % THD) Power Frequency Response 35 Hz ~ 16 kHz
Headphones
M3 (3.5 mm) Jack (16 Ω ~ 32 Ω)
FEATURES
Disc Played
DVD Player
DVD-VIDEO disc
COMPACT disc (CD-DA, VIDEO CD)
12 cm single-sided, single-layer
12 cm disc
12 cm single-sided, dual-layer
8 cm disc
12 cm double-sided, single-layer
8 cm single-sided, single-layer
8 cm single-sided, dual-layer
8 cm double-sided, single-layer
Accessories Supplied
Remote control Transmitter
TNQE284
Battery : AAA (R03) Battery 2pcs.
AC Adaptor
AC Adaptor : N0JZHK000005
AC Cord : K2CA2EA00005
Operating Conditions
Temperature : 42 °F - 95 °F (5 ° – 35 °C)
Humidity : 20 % - 80 % (non-condensing)
Connection Terminals
VIDEO IN
S-VIDEO (Mini DIN 4 pin)
VIDEO (Pin Jack)
AUDIO L-R (Pin Jack × 2)
DVD OUT
Y : 1.0 Vp-p (75 Ω)
C : 0.286 Vp-p (75 Ω)
1.0 Vp-p (75 Ω)
0.5 Vrms
Y : 1.0 Vp-p (75 Ω)
C : 0.286 Vp-p (75 Ω)
AUDIO L-R / DIGITAL AUDIO (STEREO M3 Jack)
1.3 Vrms (1 kHz, 0 dB) / BITSTREAM, Linear PCM
S-VIDEO (Mini DIN 4 pin)
Dimensions (W × H × D)
With pedestal
12.8 ″ (325 mm) × 9.89 ″ (251 mm) × 6.70 ″ (170 mm)
Without pedestal
12.8 ″ (325 mm) × 8.55 ″ (217 mm) × 2.72 ″ (69 mm)
Weight (Mass)
approx. 7.1 lb. (approx. 3.2 kg) Net
Note:
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
•
59
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Customer’ Record
The model number and serial number of this product can be found on its rear panel. You should note
this serial number in the space provided below and retain this book, plus your purchase receipt, as a
permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty
Service purposes.
Model Number
TC-11LV1
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus
New Jersey 07094
Serial Number
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico Inc. (“PSC”)
Ave. 65 de Infanteria, Km 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
Printed in Japan
MBS101A0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement