Panasonic TX26LX50F Operating Instructions

Panasonic TX26LX50F Operating Instructions
OK
1
2
3
4
5
6
7
8
9
C
0
Operating Instructions
Wide LCD TV
N
PULL
TV
Model No.
TX-26LX50F
TX-32LX50F
The illustration shown is an image.
Please read these instructions before operating your set and retain them for future reference.
English
TQB0E0120U
Welcome
Dear Panasonic Customer,
We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of
this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete
instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers.
Contents
Accessories ................................................................ 2
Warnings and Precautions ......................................... 3
Fitting remote control batteries ................................... 3
Cable cover removal and fitting .................................. 4
How to open the front cover ....................................... 4
How to use the LCD stand ......................................... 4
Quick Start Guide ....................................................... 5
Basic controls: front panel and remote control ........... 7
Using the On Screen Displays ................................... 8
Picture menu .............................................................. 9
Sound menu ............................................................. 10
Setup menu .............................................................. 11
Tuning menu – overview .......................................... 12
Tuning menu – Programme edit ............................... 13
Adding / deleting a programme channel ................ 13
Moving a programme channel ............................... 13
Tuning a programme channel................................ 13
Renaming a programme channel .......................... 14
Locking a programme channel .............................. 14
Changing the sound system for a channel ............ 14
Copying programme information to
a recording device ........................................ 14
Tuning menu – Auto setup ........................................ 15
Tuning menu – Manual tuning .................................. 16
Manual tuning (via front panel) ................................ 16
Q-Link ....................................................................... 17
Aspect Controls ........................................................ 18
VCR / DVD operation ............................................... 20
Teletext operation ..................................................... 21
Still ............................................................................ 23
Audio / Video connections ........................................ 24
How to connect the Headphones / AV3 terminals ... 24
How to connect the Audio Output terminals ......... 25
How to connect the AV1 / 2 / 4 Scart terminals ..... 25
How to connect the Component Input terminals ... 25
Troubleshooting ........................................................ 26
Maintenance ............................................................. 27
Scart and S-video terminal information .................... 27
Specifications ........................................................... 28
Accessories
Check that you have the accessories and items shown
Operating
Instructions
Remote Control
Transmitter
(EUR7651060)
OK
1
2
3
4
5
6
7
8
9
C
0
N
TV
2
Batteries for the
Remote Control
Transmitter
(2 × R6 (UM3) size)
Clamper
Pan European
Guarantee Card
Warnings and Precautions
• This TV set is designed to operate on AC 220-240 V,
50 / 60 Hz.
• To prevent damage which might result in electric shock
or fire, do not expose this TV set to rain or excessive
moisture. This TV must not be exposed to dripping or
splashing water and objects filled with liquid, such as
vases, must not be placed on top of or above the TV.
• Keep unneeded small parts and other objects out
of the reach of small children. These objects can
be accidentally swallowed. Also, be careful about
packaging materials and plastic sheets.
• WARNING: HIGH VOLTAGE!!!
Do not remove the rear cover as live parts are
accessible when it is removed. There are no user
serviceable parts inside.
Ensure that the mains plug is easily accessible.
• TV Games / Home Computers
Extended use of TV games or home computers with
any television set can cause a ‘shadow’ on the screen.
This type of LCD panel phenomenon, can be limited
by observing the following points:
• The On / Off switch on this model does not fully
disconnect the TV from the mains supply. Remove the
mains plug from the wall socket before connecting or
disconnecting any leads, or if the TV set is not used
for a prolonged period of time.
Note:
If the set is not switched off when the TV station stops
transmitting, it will automatically go to Standby mode
after 30 minutes. This function will not operate when
the TV is in AV mode.
• Cabinet and LCD panel care
Remove the mains plug from the wall socket. The
cabinet and LCD panel can be cleaned with a soft cloth
moistened with mild detergent and water. Do not use
solutions containing benzol or petroleum.
• When ambient temperature is cool, the picture may
take a short time to reach normal brightness, but this
is not a malfunction. (After brief moment, the picture
will have normal brightness.)
• Adequate ventilation is essential to prevent failure of
electrical components, we recommend that a gap of
at least 10 cm is left all around this television receiver
even when it is placed inside a cabinet or between
shelves.
• Avoid exposing the TV set to direct sunlight and other
sources of heat. To prevent fire, never place any type
of candle or naked flame on top or near the TV set.
• Ventilation should not be impleded by covering the
ventilation openings with items such as newspapers,
table cloths and curtains.
• Reduce the brightness and contrast levels to a minimum
viewing level.
• Do not allow a still picture to be displayed for an extended
period, as this can cause a permanent after-image to remain
on the LCD TV screen.
• Examples of still pictures include logos, video games,
computer images, teletext and images displayed in 4:3
mode.
• This type of LCD panel damage, is not an operating defect,
and as such is not covered by the Panasonic warranty.
Fitting remote control batteries
1
2
3
+
-
+
-
“R6 (UM3)” size
Pull and hold the hook, then
open the battery cover.
Insert batteries - note correct
polarity ( + and -).
Replace the cover.
• Make sure that the batteries are fitted the correct way round.
• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni-Cad) batteries.
Batteries, packaging and old equipment should not be disposed of as domestic waste,
but in accordance with the applicable regulations.
3
Cable cover removal and fitting
Removal
1. Push down hooks and pull the cover slightly towards
yourself to disengage the claws (at 3 points).
2. Slowly pull out in the downward direction.
Fitting
1. Insert the claws (at 3 points) at the bottom end.
2. Push until it clicks.
Note:
To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.
How to open the front cover
PULL
PULL
Raise the lower part of the door
labeled “PULL”.
How to use the LCD stand
Adjust the LCD panel to your desired angle.
The LCD panel can be adjusted the following direction:
20° Right
20° Left
(View from the top)
4
Quick Start Guide
1
Connection and setting up options
Please ensure that the unit is disconnected from the mains
before attaching or disconnecting any leads.
RF cable
(Not supplied)
SET TOP BOX
AV1
AV2
AV4
COMPONENT
L
Y
R
AUDIO
Scart cables
(Not supplied)
PB
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
PR
VIDEO
RF cable (Not supplied)
VCR / DVD
Recorder
OR
Plug in aerial and connect ancillary equipment.
2
Connect the mains plug to the wall socket.
Press the [
set on.
] switch on the TV set to turn the
To switch the TV set to Standby mode, press the
button on the remote control.
The TV set can be switched on by pressing the
button again if it was in Standby mode.
Note:
This TV will still consume some power as long
as the mains plug is still inserted into the wall
socket.
C.A.T.S. sensor
LCD C.A.T.S. (Contrast Automatic Tracking
System) automatically senses the ambient
light conditions and adjusts the brightness and
gradation accordingly, to optimize contrast.
C.A.T.S. is in effect when Viewing mode is set
to Auto. See page 9.
OK
PULL
1
2
3
4
5
6
7
8
9
C
0
N
TV
Power Indicator
Standby : Red
On : No Light
Remote control signal sensor
5
Quick Start Guide
3
Select your country.
For Belgium, Switzerland and E.Eu, select
the desired language.
If you wish to perform manual tuning, press
the Green button.
See page 16.
Land
Green
Press the Red button to start Auto Setup.
Deutschland
Österreich
France
Italia
España
Portugal
Nederland
Danmark
Sverige
Norge
Suomi
Belgien
Schweiz
ELLADA
Polska
Česká republika
Magyarország
E.Eu
Start ATP
OK
Suchlauf
Abbruch
Red
Auto setup will begin, your stations will be
located and stored.
If a compatible recording device is connected
to the correct Scart terminal, programme
data will be downloaded to the device via
Q-Link.
See page 17.
4
CH12
1
2
3
4
5
6
7
8
9
C
0
N
AUTO SETUP IN PROGRESS
SEARCHING :
PLEASE WAIT
02
78:01
41
TV
Exit
TV to VCR or DVD Recorder Download
If a “Q-Link”, “NEXTVIEWLINK” or compatible recording device has been
connected to a Scart terminal before starting Step 2, programme information
will be downloaded to that device.
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
The programme positions will be downloaded to the recording device, in the same order as stored in the TV.
See page 17.
Not all VCRs / DVD Recorders support this download of programme information, some may require to be
started manually.
Refer to the recording device’s operating instruction book.
If a recording device other than those described above has been connected, then there will be no download
operation.
Notes:
• If the recording device has not accepted download data from the TV, you may need to select the Download
option from the device’s menu system. Refer to the recording device’s operating instruction book.
• If Q-Link is not operating correctly, check the following:
The Scart cable is connected to the TV’s Scart terminal, AV2 or AV4, and correctly setup in the menu.
The Scart cable is connected to the recording device’s compatible (Q-Link, NEXTVIEWLINK or similar
technology) Scart terminal.
The Scart cable is a “fully wired” type.
• For further information on Q-Link and connecting equipment, see page 17, 25, 27.
6
Basic controls: front panel and remote control
On / Off switch
STR (Normalization store)
Used to store tuning and other function settings.
F (Function select)
Displays the On Screen Display functions, use
repeatedly to select from the available functions Volume, Contrast, Brightness, Colour, Sharpness,
Tint (in NTSC mode), Bass, Treble, Balance and
Tuning mode.
Headphones jack
AV3 terminals
(see page 24)
(see page 24)
TV/AV button (see page 24)
Increases or decreases the programme position by one. When a
function is already displayed, press to increase or decrease the
selected function. When in Standby mode, switches TV On.
Standby On / Off button
Switches TV On or Off (Standby mode).
GUIDE button
Displays the Programme table.
Move the cursor to choose the position,
then press the OK button to the viewing
screen.
Menu button
Press to access the Picture, Sound and
Setup menus. (see page 8-11)
Sound mute On / Off
DIRECT TV REC
GUIDE
TV/AV
DIRECT TV Record button
(see page 17)
Switch between viewing TV or AV input.
(see page 24)
Cursor buttons to make selections and
adjustments.
OK
EXIT
MENU
Exit the mode.
Press to confirm selections and choices.
Coloured buttons used for the selection,
navigation and operation of various
functions.
TEXT
F.P.
INDEX HOLD
Text Index button (see page 23)
Teletext button (see page 21-23)
1
2
3
Text F.P. button (see page 22)
4
5
6
Direct channel access
During normal TV viewing or when
in the Tuning, Programme edit or
Manual tuning menus, press and then
enter channel number using the numeric
buttons.
7
8
9
0
C
N (Normalize) button
Resets all settings to their default levels.
Programme / channel change buttons (09) and Teletext page buttons.
(see page 21-23)
When in Standby mode, switches TV
On.
Status button
Press to display status information for the
current Programme position, Programme
name, Channel number, MPX mode,
Receiving system and ASPECT mode.
Press again to remove the information.
VCR
Channel up / down button
ASPECT control button
(see page 18, 19)
Text Hold / Picture Still button
(see page 21, 23)
ASPECT
Volume up / down button
N
REC
PROGRAMME
VCR
DVD
VCR / DVD buttons
(see page 20)
TV
7
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control
as shown below to access and adjust features as desired.
The MENU button is used to open the main menus and also
to return to the previous menu.
MENU
OK
The up and down cursor buttons are used to move the
cursor and select menus.
The left and right cursor buttons are used to access menus,
adjust levels or to select from a range of options.
The OK button is used with a number of features to store
settings after adjustments have been made or options have
been set.
The EXIT button is used to exit the menu system and return
to the normal viewing screen.
An On Screen Help box is displayed whenever a menu is
displayed on the TV. This Help box indicates which buttons on
the remote control are used to navigate the menu shown, see
above for descriptions of button functions.
Note:
The Help box is not shown in the menu pictures in this instruction
book due to space limitations.
8
OK
EXIT
1
2
3
4
5
6
7
8
9
C
0
N
TV
Sound menu
Bass
Treble
Balance
Headphone volume
MPX
Mode
Ambience
No service
Music
Off
Select
Adjust
Exit
Return
ON SCREEN HELP
‘Instructions’ box
Picture menu
Press the MENU button.
MENU
Move to choose Picture menu.
OK
Access Picture menu.
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
1
2
3
4
5
6
7
8
9
C
0
N
EXIT
TV
Viewing mode
The Viewing mode menu allows you to select four different
screen settings - Dynamic, Normal, Cinema and Auto.
In each Viewing mode setting, Contrast, Brightness,
Colour, Sharpness, Tint (in NTSC only), Colour balance,
Colour management, P-NR, MPEG NR and 3D-COMB
can be adjusted and stored to suit your particular viewing
requirement. (e.g., you may require different settings for
viewing sports, films, news etc.)
Viewing mode offers you up to a maximum of four separate
settings for each signal source: RF, AV1, AV2, AV3, AV4
and Component. Changes will be stored automatically.
By analysing and processing the incoming picture, all four
modes feature automatic enhancement.
Contrast, Brightness, Colour, Sharpness
Increase or decrease the levels of these options according
to your personal preference.
Tint
Colour balance
With an NTSC signal source connected to the TV, the picture
hue can be adjusted to suit your taste.
Allows you to set the overall colour tone of the picture.
Choose from Cool, Normal and Warm.
Colour
management
Enables vivid colour adjustment automatically.
P-NR
Automatically reduces unwanted picture noise.
Not available during HD signal input.
MPEG NR
3D-COMB
Reduces MPEG noise.
Allows you to choose from Off, Min, Mid and Max.
This function is effective in reducing the digital block noise
when viewing DVD, VCD or digital broadcasting. The effect
will be changed based on the scene and image.
MPEG: Compression technology of the image signal
adopted by DVD, VCD or digital broadcasting.
Main menu
P i c t u r e menu
Sound menu
Setup menu
Picture menu
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB
Dynamic
Normal
On
Auto
Off
On
Picture menu
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB
Dynamic
Normal
On
Auto
Off
On
Picture menu
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB
Dynamic
Normal
On
Auto
Off
On
Occasionally, whilst viewing still or slow moving pictures,
colour patterning may be seen. Set 3D-COMB to On to
display sharper and more accurate colours.
Displayed only when receiving PAL or NTSC signals.
Not displayed during RGB Video, S-Video and component
input mode.
9
Sound menu
Press the MENU button.
MENU
Move to choose Sound menu.
OK
Access Sound menu.
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
1
2
3
4
5
6
7
8
9
C
0
N
EXIT
TV
Press the OK button after having adjusted some features to store the new
settings as the default (replacing the factory setting).
Bass
Increase or decrease level to enhance or minimise lower,
deeper sound output.
Treble
Increase or decrease level to enhance or minimise sharper,
higher sound output.
Balance
Headphone
volume
The levels of sound between the left and right speakers can
be adjusted to suit your listening position.
Can be adjusted independently of the TV speakers so
that everyone can enjoy listening at a level comfortable
for them.
OK
Main menu
P i c t u r e menu
Sound menu
Setup menu
Sound menu
Bass
Treble
Balance
Headphone volume
MPX
Mode
Ambience
No service
Music
Off
Sound menu
MPX
Usually set to Stereo to provide the best reproduction, but if
reception deteriorates or if the service is not available then
switch to Mono. Mono (M1) and (M2) can also be selected
if a mono signal is being transmitted.
Bass
Treble
Balance
Headphone volume
MPX
Mode
Ambience
No service
Music
Off
Sound menu
Mode
Ambience
10
Sound quality can be improved when watching music scene
or drama by selecting the appropriate Music or Speech
mode.
Bass
Treble
Balance
Headphone volume
MPX
Mode
Ambience
Ambience provides a dynamic enhancer to simulate
improved spatial effects.
Sound menu
Bass
Treble
Balance
Headphone volume
MPX
Mode
Ambience
No service
Music
Off
No service
Music
Off
Setup menu
Press the MENU button.
MENU
Move to choose Setup menu.
OK
Access Setup menu.
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
1
2
3
4
5
6
7
8
9
C
0
N
EXIT
TV
Q-Link
Allows you to select which AV terminal is to be used for data
communication between this TV and a compatible recording
device. Choose from Off, AV2 and AV4. See page 17.
AV2 / AV4 out
Offers a choice of signals to send to the Scart terminal
selected in the Q-Link option. You can choose from the
current TV programme position, the signal entering AV1
/ AV2 / AV3 / AV4 or Monitor - the picture displayed on
screen.
Teletext
Allows you to choose between TOP/FASTEXT or List mode.
See page 21-23.
Off timer
Switches the TV off within a preset time which you can
choose from between 0 to 90 minutes in 15 minute
intervals.
Text language
Main menu
P i c t u r e menu
Sound menu
Setup menu
Setup menu
Q-Link
AV2 out
Teletext
Off timer
Text language
Tuning menu
OSD language
AV2
TV
TOP
Off
West
Setup menu
Q-Link
AV2 out
Teletext
Off timer
Text language
Tuning menu
OSD language
Select character set, so that all characters needed are
availabe for text on teletext pages (e.g., cyrillic characters,
etc.).
Mode Languages
Setup menu
West: English, French, German, Greek, Italian, Spanish, Q-Link
AV2 out
Swedish, Turkish
Teletext
timer
East1: Czech, English, Estonian, Lettish, Rumanian, Off
Text language
Tuning menu
Russian, Ukrainian
OSD language
East2: Czech, English, German, Hungarian, Lettish, Polish,
AV mode
Rumanian
AV2
TV
TOP
Off
West
Access
AV2
TV
TOP
Off
West
Access
Setup menu
Tuning menu
Provides access to many other features including
Programme edit and Auto setup. See page 12-16.
OSD language
When you first install the TV, the On Screen Display
language is set according to your choice of country. OSD
language lets you change the language used for On Screen
Displays.
Colour system
During AV mode, Colour system is displayed. See page
12.
Q-Link
AV2 out
Teletext
Off timer
Colour system
Volume correction
Text language
OSD language
AV2
TV
TOP
Off
Auto
West
Volume correction During AV mode, Volume correction is displayed.
You can adjust volume level of AV mode. Volume level is
memorised.
11
Tuning menu – overview
Press the MENU button.
MENU
Move to choose Setup menu.
OK
Access Setup menu.
Move to choose Tuning menu.
1
2
3
4
5
6
7
8
9
C
0
Access Tuning menu.
Move to choose menu option.
N
Adjust chosen option or access chosen menu.
TV
Press the EXIT button at any time to go back to watching TV.
Press the OK button after having adjusted some features to store the new
settings as the default (replacing the factory setting).
Programme edit
Access in order to customize your programme settings
(e.g., adding or deleting a programme position). See page
13, 14.
EXIT
OK
Main menu
P i c t u r e menu
Sound menu
Auto setup
Allows you to automatically retune the TV. Useful if you
move house and wish to retune your TV to the local stations.
See page 15.
Manual tuning
Allows individual programme positions to be tuned manually.
See page 16.
Fine tuning
Use to make small adjustments to the tuning of an individual
station (useful for example when weather conditions are
affecting reception quality of a programme).
Setup menu
Setup menu
AV2
TV
TOP
Off
West
Access
Q-Link
AV2 out
Teletext
Off timer
Text language
Tuning menu
OSD language
Tuning menu
Colour system
Volume correc.
Decoder
(AV2 / AV4)
Lets you select the correct transmission standard for the
transmission signal being received.
Lets you adjust the volume level of individual stations. Use
this feature if the volume level varies significantly between
stations. Adjusting one station’s volume to bring it into line
with the other stations means you can avoid having to adjust
the volume each time you change channels.
This option is used when a decoder is connected via
AV2 / AV4. Store the setting as On so that every time
this programme position is selected, the TV software is
set to handle the decoded information (this is important if
your decoder unit is connected to AV2 / AV4 via a Q-Link
device).
Auto
Off
Programme edit
Prog.
1
2
3
4
5
:
:
:
:
:
Delete
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
Add
Move
Tuning menu
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Decoder (AV2)
Access
Auto
Off
Tuning menu
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Decoder (AV2)
Access
Auto
Off
Tuning menu
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Decoder (AV2)
12
Access
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Decoder (AV2)
Auto
Off
Download
Tuning menu – Programme edit
MENU
Press the MENU button.
Move to choose Setup menu.
OK
Access Setup menu.
Move to choose Tuning menu.
1
2
3
4
5
6
7
8
9
C
0
Access Tuning menu.
Move to choose Programme edit.
N
Access Programme edit.
TV
Move to choose programme position (e.g., Prog. 3).
Make required change, e.g., moving a programme channel (see the
relevant procedure below).
EXIT
Press the EXIT button at any time to go back to watching TV.
Press the OK button after having adjusted some features to store the
new settings.
OK
Adding / deleting a programme channel
Move the cursor to the programme to be deleted or added.
Programme edit
Prog.
Press the Green button to add a programme channel to the
programme position, or the Red button to delete one.
Red
Green
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
Add
Cancel
Press the same button again to confirm your decision.
Moving a programme channel
Move the cursor to the programme to be moved.
Programme edit
Prog.
Press the Yellow button.
Yellow
Choose the new position for the programme channel.
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
Confirm
Cancel
Press the Yellow button again to confirm your decision.
Tuning a programme channel
Move to the Chan. column.
Programme edit
Prog.
Increase or decrease the programme channel number (you will
see the TV retune to the new number as you change it) or use the
C button for Direct Channel Access. See page 7.
Press the OK button to store this change.
1
2
3
4
5
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
C
OK
13
Tuning menu – Programme edit
Renaming a programme channel
Move to the Name column.
Programme edit
Prog.
1
2
3
4
5
Choose the new character. The box at the bottom of the screen shows
the character currently selected.
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
ABCDEFGHIJKLMNOPQRST
UVWXYZ+-. 0123456789
Move to the next character position.
Continue until renaming is done.
Press the OK button to store the new name.
OK
Locking a programme channel
You may wish to lock a programme channel to prevent access to it.
Programme edit
Prog.
1
2
3
4
5
Move to the Lock column.
Choose between Lock On or Lock Off.
Press the OK button to store the new setting.
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
OK
Note:
When a programme position is locked, Direct Channel Access
using the C and numeric buttons on the remote control is not
available.
Changing the sound system for a channel
You can change the sound system used for a programme channel.
Programme edit
Prog.
1
2
3
4
5
Move to the Sys column.
Choose the required sound system:
SC1 : PAL B, G, H / SECAM B, G
SC2 : PAL I
SC3 : PAL D, K / SECAM D, K
F:
SECAM L / L’
Press the OK button to store the new setting.
:
:
:
:
:
Chan.
Name
Lock
Sys
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
OK
Copying programme information to a recording device
You can copy programme information to a compatible recording device
connected to AV2 / AV4. See page 25 for connection information.
Press the Blue button.
Programme data will now be sent to the recording device(s). This
might take a few seconds, depending on the number of stations stored.
If the message “Feature not available” appears on the screen, the
television is unable to send the programme information to the recording
device(s). See the device’s instruction book for further information.
Note:
This is not available when you choose Q-Link Off in Setup menu.
14
DOWNLOAD IN PROGRESS
PLEASE WAIT
Blue
Programme : 63
Remote control unavailable
Tuning menu – Auto setup
Auto setup automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your TV
to receive the local stations.
MENU
Press the MENU button.
OK
Move to choose Setup menu.
Access Setup menu.
Move to choose Tuning menu.
Access Tuning menu.
1
2
3
4
5
6
7
8
9
C
0
N
Move to choose Auto setup.
Access Auto setup.
Press to confirm start.
TV
OK
Notes:
• If you proceed with the next step all tuning data will be erased
(all stations and their programme positions stored in your TV’s
memory will be wiped out so the new settings can be stored).
• If you exit the procedure after this point and before Auto setup is
complete, no station information will be stored. Restart and complete
the Auto setup procedure so that the TV is retuned.
WARNING
All current tuning
data will be erased
Start Auto Setup
Exit
Return
Select your country.
Press to start Auto setup.
Country
OK
The TV will search for, locate, store and then sort into
order your local stations.
If compatible recording device is connected via the AV2 /
AV4 terminal, programme data will be sent to the device
via Q-Link. See page 17.
CH12
AUTO SETUP IN PROGRESS
SEARCHING :
PLEASE WAIT
Once this operation is completed the TV will display the
programme now stored on programme position 1.
Press the EXIT button at any time to go back to watching
TV (please read the Notes in the above procedure).
Deutschland
Österreich
France
Italia
España
Portugal
Nederland
Danmark
Sverige
Norge
Suomi
Belgium
Schweiz
ELLADA
Polska
Česká republika
Magyarország
E.Eu
02
78:01
41
EXIT
Exit
Return
15
Tuning menu – Manual tuning
It is possible to retune individual programme positions:
MENU
Press the MENU button.
OK
Move to choose Setup menu.
Access Setup menu.
Move to choose Tuning menu.
1
2
3
4
5
6
7
8
9
C
0
Access Tuning menu.
N
Move to choose Manual tuning.
Access Manual tuning.
TV
Select the programme position to be tuned.
1
CH12
Press repeatedly until required station is found.
Manual tuning
When the desired station is found, press the OK button to store.
The programme position will flash.
OK
02
EXIT
Press the EXIT button at any time to go back to watching TV.
C
78:01
41
Search down/up
Store
Exit
Return
9 Direct entry
0
Note:
If your VCR is connected to this TV by an RF cable only, choose programme position “0” to tune to the VCR
signals.
Manual tuning (via front panel)
It is also possible to use the control panel buttons on the front of your TV to tune individual programme positions:
Press the F button until Tuning mode is reached.
Press the –/ or +/ button to access Tuning mode.
Press the TV/AV button to move between Change
programme, Search and Change TV system.
Press the –/ or +/ button to change programme position
or start search.
When the desired station is found, press the STR button
to store.
The programme position will flash.
Repeat above procedure to tune additional programme
positions.
Press the F button at any time to go back to watching TV.
16
STR
F
TV/AV
1
CH12
SC1
Manual tuning
-, +
TV / AV
STR
F
:
:
:
:
Search
Move cursor
To store
To exit
02
STR
78:01
F
-/
+/
41
TV / AV
Q-Link
Q-Link allows the television to communicate with a compatible VCR or DVD Recorder.
For Q-Link communication to work, the TV must be connected to a recording device with the “Q-Link”, “NEXTVIEWLINK”,
“DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” logo using a “fully wired” Scart cable between the AV2 /
AV4 terminal of the television and the appropriate terminal on your VCR or DVD Recorder.
For connection to the appropriate Scart terminal on the recording device, refer to the device’s instruction book.
When using a “NEXTVIEWLINK” device the main features possible are the following:
Preset Download
This allows the programme order from the TV to be downloaded to the recording device, helping to ensure that correct
recordings are made; there are several ways to perform this operation:
1. During installation as explained in the “Quick Start Guide” on page 5, 6.
2. When Auto setup is started from within the Tuning menu. See page 12.
3. Preset download started from the recording device, refer to the device’s instruction book.
OK
What You See Is What You Record (DIRECT TV RECORDING)
This will allow the immediate recording of the programme currently shown on the TV, by the recording
device attached to the Scart terminal, which can be chosen using “Q-Link”. See page 11.
Press the DIRECT TV REC button.
DIRECT TV REC
If the recording device is in Standby mode with usable recording media inserted, it will automatically
switch on when you press the DIRECT TV REC button.
If a “Q-Link” device is connected, a message will appear on the TV screen showing what is being recorded,
or if it is not possible to record. Some “Q-Link” compatible devices will only display the message when
on the VCR programme position “0” or in AV mode. Refer to the device’s instruction book.
Recording in progress
The recording device is recording the programme signal
from its own tuner. If you wish you can switch off the TV
and leave the device recording in the normal way.
1
2
3
4
5
6
7
8
9
C
0
N
TV
No recording -Check tape or disc
The tape or disc may have been “write protected”,
missing or may be damaged. The device may already be
recording. Refer to the device’s instruction book.
Additionally, when using a “Q-Link” device the main features possible are the following:
The following features are only available from the device connected to the Scart terminal selected using “Q-Link”.
See page 11.
TV / Recording device Auto Power On
If you insert pre-recorded media into the recording device and press the Play button whilst the TV is in Standby mode,
the TV will automatically switch on and select the correct AV input so that you can view the content.
Recording device Auto Power Standby
When the TV is switched into Standby mode, the recording device will also switch into Standby mode if there is no
media inserted, or if there is media inserted and the device is in Rewind or Stop mode. If a VCR is rewinding a tape,
it will not switch into Standby mode until rewinding has finished.
Recording device Image View On
If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e.g., Main
menu), the TV will automatically switch On and the menu will be displayed.
This TV will also communicate with other recording device’s that bear the following logos:
• “DATA LOGIC” (a trademark of Metz Corporation)
• “Megalogic” (a trademark of Grundig Corporation)
• “Easy Link” (a trademark of Philips Corporation)
• “SMARTLINK” (a trademark of Sony Corporation)
Important Note:
Some recording devices may not support all or some of the above functions. Refer to the instruction book for the
device.
If Q-Link functions do not work, check the connection and ensure that the scart lead is a fully-wired type.
17
Aspect Controls
The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including widescreen
cinema format pictures.
Press the ASPECT button repeatedly to move through the eight aspect
options:
ASPECT
OK
Panasonic Auto, 16:9, 14:9, Just, 4:3, Zoom1, Zoom2 and Zoom3
OR
Press the ASPECT button. Whilst the on screen selector keys are
displayed, use the Red or Green buttons to move in either direction
through the eight aspect options.
Red
1
2
3
4
5
6
7
8
9
C
0
Green
N
TV
Panasonic Auto
Panasonic Auto determines the best aspect ratio to use to fill your screen. It
does this using a four step process to determine if the picture being viewed is
a widescreen picture.
WIDE
If Panasonic Auto detects a widescreen signal it switches into the appropriate
widescreen mode. If Panasonic Auto does not detect a widescreen signal then
this advanced TV set enhances the picture for optimum viewing pleasure.
The text shown on the screen indicates how Panasonic Auto determined
which ratio to use:
Panasonic Auto switches to the appropriate widescreen ratio.
“Panasonic Auto” appears in the top left of the screen if black stripes above
and below the picture are detected.
Panasonic Auto chooses the best ratio and expands the picture to fill the
screen. This process can take several minutes, depending on the darkness
of the picture.
“WIDE” ap pears in the top left
of the screen, Panasonic Auto
switches to the appropriate 16:9
or 14:9 widescreen ratio.
Panasonic Auto
You may prefer to manually select one of the other aspect options available
to view the picture.
Notes:
• If, in Panasonic Auto mode, you experience problems with the screen display
size when playing back widescreen format recordings from your VCR then
it is possible that the tracking control of your VCR requires adjustment (your
VCR instruction book will contain adjustment details).
• The widescreen aspect ratios of different films and programmes can vary.
If these are wider than a standard 16:9 aspect picture then a black band may
be visible at the top and bottom of the screen.
• “WIDE” will appear in the top left corner of the screen and picture aspect
changes accordingly in any aspect modes, if a widescreen identification signal
(WSS) is detected or a control signal is found through a Scart terminal.
“Panasonic Auto” appears in the
top left of the screen. The best
ratio is chosen and the picture
expanded to fill the screen.
Panasonic Auto
Press the ASPECT button, then
use the Red or Green buttons to
move in either direction through
the eight aspect options.
18
Aspect Controls
16 : 9
16 : 9
16:9 will display a true 16:9 (anamorphic) picture with no aspect distortions.
16 : 9
14 : 9
14 : 9
14:9 will display a 14:9 picture at its standard 14:9 size without any
stretching.
14 : 9
Just
Just
Use Just when you wish to expand a 4:3 picture to fill the whole screen (rather
than watching a programme with black stripes down the left and right sides of
the picture).
The 4:3 picture will be stretched horizontally so that the image fills the screen,
this is done in such a way that the stretching is only obvious at the left and
right edges of the screen.
4:3
Just
4:3
4:3 will display a 4:3 picture at its standard 4:3 size with no aspect
distortions.
4:3
Zoom1
Zoom1
Zoom1 will display 16:9 letterbox or 4:3 pictures with no aspect distortions.
Zoom1
Zoom2
Zoom2
Zoom2 will display 16:9 anamorphic letterbox pictures as a full screen display
with no aspect distortions.
Zoom2
Zoom3
Zoom3
Zoom3 will display 21:9 letterbox pictures as a full screen display with no
aspect distortions.
16:9 will display the picture at its maximum size but with slight stretching.
Zoom3
19
VCR / DVD operation
The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital Versatile
Disc) equipment. Some VCR and DVD equipment have different functions, so to ensure compatibility please refer to
the equipment’s instruction book or consult your dealer for details.
Standby
Press to switch the VCR, DVD or DVD recorder to Standby
mode.
Press again to switch back on.
DIRECT TV REC
GUIDE
TV/AV
VCR
DVD
VCR / DVD switch
Use this switch to select whether controls operate the DVD
equipment or VCR.
OK
EXIT
MENU
Play
Press to playback the tape or DVD.
TEXT
F.P.
INDEX HOLD
1
2
3
4
5
6
7
8
9
Stop
Press to stop the tape or DVD.
Skip / Fast Forward / Cue
VCR: Press to fast forward the tape. In Play mode, press
to view the picture rapidly forward (Cue).
DVD: Press to skip to the next track or title.
Press and hold to search forward.
0
C
VCR
Skip / Rewind / Review
VCR: Press to rewind the tape. In Play mode, press to view
the picture rapidly in reverse (Review).
DVD: Press to skip to the previous track or title.
Press and hold to search backward.
ASPECT
N
REC
VCR
DVD
Pause / Still
Press in Play mode, the picture will pause.
Press again to restart play.
DVD: Press and hold for slow-motion play.
PROGRAMME
TV
PROGRAMME
REC
20
Programme Up / Down
Press to increase or decrease the programme position by
one.
Record
Press this button to start recording.
Teletext operation
• Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected
is transmitting Teletext.
• Pressing the MENU button whilst in Teletext operation will display the contrast function with a cyan bar, press the
left and right cursor buttons to alter the setting as required.
• Pressing the MENU button whilst in Teletext operation will display special function options at the bottom of the
screen.
• Pressing the Volume up / down button whilst in Teletext operation will display the volume function with a green bar,
press the volume up / down button to alter the setting as required.
What is List mode ?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers
can be altered and stored in the TV’s memory.
What is TOP/FASTEXT mode?
In TOP/FASTEXT mode, four differently coloured subjects are situated at the bottom of the display. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
TV / Teletext mode
Press the TEXT button to switch between the current programme and teletext.
TEXT
1
2
3
4
5
6
7
8
9
0
VCR
MENU
Green
MENU
Red
Page Selection
Pages can be selected in two ways:
a. Press the Up / Down cursor buttons to increase or decrease the page number by one.
b. By entering the page number, using 0 - 9 on the remote control.
Full / Top / Bottom
Press the MENU button to display special functions, followed by the Green button.
Press the Green button again to expand the BOTTOM half.
Press again to return to normal (FULL) size.
Reveal
Press the MENU button to display special functions, followed by the Red button to reveal
hidden words e.g., quiz page answers. Press again to hide.
Red / Green / Yellow / Blue buttons
In TOP/FASTEXT mode they correspond to the differently coloured subjects.
In List mode they correspond to the differently coloured page numbers.
1
2
3
4
5
6
7
8
9
OK
List Store
In List mode the four page numbers can be altered (programme positions 1 - 25 only).
To do this, press one of the four coloured buttons and enter the new page number.
Press and hold the OK button, the page numbers will change to white indicating that the
page is stored.
0
VCR
HOLD
HOLD
To hold the Teletext page when viewing multi-page information.
Press again to return to automatic page update.
21
Teletext operation
It is not possible to change the programme position when in News flash, Update or Sub Coded Page Access
operation.
Blue
1
2
3
4
5
6
8
9
7
OK
F.P.
0
VCR
MENU
Yellow
Favourite Page (F.P.)
Stores a favourite page in memory for instant recall. To store such a page, the TV must be
in List mode, and the programme position must be from 1 - 25.
Press the Blue button, select the page number, then press and hold the OK button. The
page number is now stored.
Press F.P. to recall this page.
Update Display
Press the MENU button to display special functions, followed by the Yellow button to view
the TV picture whilst searching for a Teletext page (this is not necessary in Picture and text
mode, as the picture is displayed on the left of the screen). When found, the screen will
display the page number at the top left. Press the Yellow button to view the page.
Press the TEXT button again to return to normal TV operation.
News Flash
When a news flash page has been selected, press the MENU, Yellow buttons, to view the
TV picture. When an update is received, the page number will be displayed on screen.
Press the Yellow button to display the News Flash.
Press the TEXT button to return to normal TV operation.
Update
Press the MENU, Yellow buttons to see the update of information on certain pages.
When an update is received, the page number will be displayed at the top left of the
screen.
Press the Yellow button to view the page.
Press the TEXT button to return to normal TV operation.
Accessing sub pages
When Teletext information exceeds one page, it may take some time for the automatic
changing of the sub pages to reach the sub page you require. As each sub page is found
its number is displayed at the top of the page so that you may select it; as more sub pages
are picked up, the display at the top of the page changes, so that you are always offered
the most recently transmitted selection of sub pages.
In Teletext operation, use the following procedure to access sub pages:
1
2
3
4
5
6
7
8
9
If the sub page you want to look at is not yet available, press the MENU button (to display
special functions) followed by the Yellow button to view the TV picture whilst waiting for
more sub pages to be found. The sub pages found will be displayed across the top of the
screen.
0
VCR
MENU
Yellow
22
When the sub page you are waiting for is available press the Yellow button to return to
viewing the Teletext pages, then use the left and right cursor buttons to select the sub
page of your choice.
The maximum number for sub page that can be entered is restricted to 79 by
broadcasters.
Notes:
• If you do not want to display the on screen selector keys on the TV picture whilst waiting
for a sub page to be found, press the MENU button to clear the keys from the screen.
Press again to redisplay the keys.
• If you have cleared the special function keys from the screen and then used the left and
right cursor buttons to select a sub page, whilst still viewing the TV picture, you must
press the MENU button then the Yellow button to display the Teletext page again.
• If the top of the page indicates that sub pages are being transmitted but the page displayed
never changes, then the ‘sub page number’ is there to show the page contents have been
updated, there are no sub pages.
Teletext operation
MENU
Blue
Alternatively, if you know which sub page you require, press the MENU button (to display
special functions) followed by the Blue button; T**** will be displayed where the page number
is normally found.
Enter desired sub page number before the T**** disappears.
e.g., to select page 6 enter 0, 0, 0 and 6.
Press the Yellow button to view the TV picture whilst waiting for more sub pages to be found.
The sub pages found will be displayed across the top of the screen.
When the page is available, press the Yellow button to view the page. Regardless of how
many pages are found, pressing the Yellow button will take you to the sub page which you
requested.
Press the TEXT button to return to normal TV operation.
INDEX
MENU
INDEX
When in TOP/FASTEXT operation
Press the INDEX button to return to the main index page.
Depending on the way information is transmitted, this may have to be pressed more than
once to return to the main index page.
Picture and text
Press the MENU button twice to display special functions, followed by the left or right cursor
button to select Picture and text On or Off.
Picture and text mode lets you see the current programme and a page of teletext side by
side. Whilst using this feature, the remote control affects the teletext page; if you wish to
make changes to the programme viewed press the TEXT button to return to watching the
programme on its own then make the desired changes.
Still
Press the HOLD button to freeze the picture.
Press again to return to watching the current programme.
HOLD
OK
1
2
3
4
5
6
7
8
9
C
0
N
TV
23
Audio / Video connections
It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external
equipment to the front and rear of the TV.
Once your equipment is connected, use the following procedure to view the input:
TV/AV
Press the TV/AV button.
Whilst the on screen selector keys are displayed, select the page by
pressing the Red or Blue button and then press coloured buttons to
select the AV source you wish to view.
Red button
: AV1 Scart terminal / Back page
Green button : AV2 Video, S-Video Scart terminal /
AV4 Video, S-Video Scart terminal
Yellow button : AV3 Audio, Video, S-Video terminals /
Component terminals
Blue button : Next page / The on screen selector keys that appear clear after a few seconds. If
you want to select an input when the keys are not shown, press the
TV/AV button again and the keys will reappear.
Red
Blue
OK
1
2
3
4
5
6
7
8
9
C
0
N
TV/AV
TV
Notes:
• You can also select an AV source using the TV/AV button on the
front panel of the TV.
Press the TV/AV button repeatedly until you reach the AV source
you wish to view.
• When in AV mode a reduced number of options are available
in the Sound and Setup menus (e.g., in the Setup menu there
is no Tuning menu option).
How to connect the Headphones / AV3 terminals
(M3 plug)
(Optional)
Connect the S-VIDEO or VIDEO terminal.
S-Video
OUT
VCR / S-VIDEO VCR
DVD PLAYER
CAMCORDER /
S-VIDEO CAMCORDER
VIDEO
Video
OUT
Audio
OUT
S-VIDEO
L
AUDIO
R
Notes:
• The volume level of the headphones can be adjusted by selecting “Headphone volume” from the Sound menu.
• Additional equipment and cables shown are not supplied with this TV set.
24
Audio / Video connections
To bundle the cables with the clamper
To tighten:
To loosen:
Pull
Keep the
Pull
knob pressed.
Note: Do not put the RF cable and the mains lead together to avoid noise.
How to connect the Audio Output terminals
AV1
AV2
AV4
COMPONENT
AUDIO
IN
L
L
R
R
L
Amplifier to Speaker
System
Y
R
AUDIO
OUT
AUDIO
PB
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
PR
VIDEO
How to connect the AV1 / 2 / 4 Scart terminals
AV1
AV2
AV4
COMPONENT
L
Y
R
AUDIO
AV1:
VCR
SET TOP BOX
DVD PLAYER
DVD RECORDER
CAMCORDER
GAME CONSOLE /
COMPUTER(RGB)
AV2:
VCR / S-VIDEO VCR
Q-Link COMPATIBLE VCR
DVD PLAYER
DVD RECORDER
Q-Link COMPATIBLE
DVD RECORDER
CAMCORDER /
S-VIDEO CAMCORDER
AV1/2/4
AV4:
VCR / S-VIDEO VCR
Q-Link COMPATIBLE VCR
SET TOP BOX
DVD PLAYER
DVD RECORDER
Q-Link COMPATIBLE
DVD RECORDER
CAMCORDER /
S-VIDEO CAMCORDER
GAME CONSOLE /
COMPUTER(RGB)
PB
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
PR
VIDEO
How to connect the Component Input terminals
This terminal accepts progressive or non-progressive signals format.
Y
Y
AV1
AV2
AV4
AUDIO IN
Y, PB, PR PB
OUT
COMPONENT
PB
L
L
DVD PLAYER
Y
R
PR
PR
R
AUDIO
AUDIO
OUT
L
L
R
R
PB
AUDIO
RGB
VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
S-VIDEO
PR
VIDEO
Notes:
• Additional equipment and cables shown are not supplied with this TV set.
• Do not connect a computer with TTL output (5V) to this set.
• For Scart terminal wiring information see page 27.
25
Troubleshooting
If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
Symptoms
Picture
Checks
Sound
Aerial location, direction or connection
Snowy Picture
Noisy Sound
Aerial location, direction or connection
Multiple Images
Normal Sound
Electrical appliances
Cars / Motorcycles
Fluorescent lights
Interference
Noisy Sound
Switch on P-NR in Picture menu to reduce picture noise.
Volume level
Sound mute switched on.
Normal Picture
No Picture
No Sound
No Sound
TV set to AV mode.
Not plugged into AC outlet.
Not switched on.
Picture / Sound controls set at minimum levels.
Check if in Standby mode.
Colour controls set at minimum levels.
No Colour
Normal Sound
Retune Channel (s).
Poor or Distorted Picture
Weak or No Sound
Sound reception may have deteriorated.
Switch MPX setting (Sound menu) to Off until reception improves.
Normal Picture
Weak or Distorted Sound
There may be red spots,
blue spots and green
spots on the screen.
Normal Sound
26
This is a characteristic of liquid crystal panels and is not a problem. The
liquid crystal panel is built with very high precision technology giving you
fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of blue, green, or red.
Please note this does not affect the performance of your LCD.
Maintenance
To clean this set, wipe with a soft, dry cloth.
Neutral
If the surfaces are extremely dirty, use a soft cloth dipped in soap-and-water solution or a detergent
weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this set.
• Before using chemically treated cloth, read the instructions that came with the cloth
carefully.
• Do not wipe the LCD with water.
Wipe the cabinet with a soft cloth.
If the cabinet is heavily soiled, wipe with a well-wrung soft cloth dipped in neutral cleanser diluted with water.
CAUTION:
If water or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction may result.
Scart and S-video terminal information
AV1 Scart terminal (RGB, VIDEO)
Socket Earth
CVBS out (video)
CVBS earth
Red in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
RGB status earth
Status RGB
Earth
--Status CVBS
Audio in (L)
Audio earth
Audio in (R)
Suitable inputs for AV1 include
RGB (Red / Green / Blue).
AV3 S-VIDEO 4 pin terminal
Chrominance in
Chrominance earth
Luminance in
Luminance earth
AV2 Scart terminal (VIDEO, S-VIDEO, Q-Link)
Socket Earth
21
CVBS out (video) 19
CVBS earth
17
S.C. - in
15
Earth
13
-11
Earth
9
-7
Earth
5
Audio out (L)
3
Audio out (R)
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
Earth
-Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
AV2 - Pins 15 and 20 are dependent
on AV2 S-VHS / VIDEO switching.
AV4 Scart terminal (RGB, VIDEO, S-VIDEO, Q-Link)
Socket Earth
21
CVBS out (video) 19
CVBS earth
17
Red in, S.C. - in 15
Red earth
13
Green in
11
Green earth
9
Blue in
7
Blue earth
5
Audio out (L)
3
Audio out (R)
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
Earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
AV4 - Pins 15 and 20 are dependent
on AV4 S-VHS / VIDEO switching.
27
Specifications
Power Source
Power Consumption
LCD
Screen Size
Sound
Speaker
Audio Output
Headphones
Scanning format
Receiving Systems /
Band name
Aerial - Rear
Operating Conditions
Connection Terminals
AV1 (Scart connecter)
AV2 (Scart connecter)
AV3
VIDEO
S-VIDEO
AUDIO L - R
AV4 (Scart connecter)
COMPONENT VIDEO
AUDIO L - R
Output
AUDIO L - R
Dimensions ( W × H × D )
Including TV Stand
TV Set Only
Weight
TX-26LX50F
AC 220-240 V, 50 / 60 Hz
Average use : 126 W
Standby condition : 0.4 W
Wide XGA (1,366 × 768 pixels)
16:9 aspect ratio LCD panel
575.8 mm (W) × 323.7 mm (H)
TX-32LX50F
Average use : 161 W
Standby condition : 0.4 W
697.7 mm (W) × 392.3 mm (H)
Woofer φ 8 cm × 2 pcs, Full range φ 5 cm × 2 pcs
20 W (5.4 W + 5.4 W, 4.6 W + 4.6 W)
M3 (3.5 mm) Jack × 1
480i(60Hz), 480p(60Hz), 576i(50Hz), 576p(50Hz), 720p(50Hz), 1080i(50Hz)
PAL B, G, H, SECAM B, G SECAM L / L’
VHF E2 - E12
VHF H1 - H2 (ITALY)
VHF A - H (ITALY)
UHF E21 - E69
CATV (S01 - S05)
CATV S1 - S10 (M1 - M10)
CATV S11 - S20 (U1 - U10)
CATV S21 - S41 (Hyperband)
PAL D, K, SECAM D, K
VHF R1 - R2
VHF R3 - R5
VHF R6 - R12
UHF E21 - E69
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR)
M.NTSC
Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only) Playback from NTSC Video recorders (VCR)
UHF / VHF
Temperature : 5 °C - 35 °C
Humidity : 5 % - 90 % RH (non-condensing)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in)
21 Pin terminal (Audio/Video in, Audio/Video out, S-Video in, Q-Link)
RCA PIN Type × 1
Mini DIN 4-pin
RCA PIN Type × 2
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
Y, PB, PR
RCA PIN Type × 2
RCA PIN Type × 2
663 mm × 556 mm × 299.5 mm
663 mm × 494.3 mm × 140.7 mm
795 mm × 634.7 mm × 299.5 mm
795 mm × 573 mm × 140.7 mm
18 kg Net
21 kg Net
Note:
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
Customer’s Record
The model number and serial number of this product can be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record
of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global/
 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Czech Republic
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement