Panasonic | EBGD75 | Operating instructions | Panasonic EBGD75 Operating Instructions

Operating Instructions
Digital Cellular Phone
EB-GD75
Before operating this equipment please read these instructions
completely.
Important Information
Important Information
We, Matsushita Communication Industrial UK Ltd., declare, that the
EB-GD75 conforms with the essential and other relevant requirements of
the directive 1999/5/EC. A declaration of conformity to this effect can be
found at http://www.panasonicmobile.co.uk/support
Safety Considerations
The following information should be read and understood as it provides
details which will enable you to operate your phone in a manner which is
both safe to you and your environment, and conforms to any legal
requirements regarding the use of cellular phones.
This equipment should only be charged with approved charging
equipment. Other usage will invalidate any approval given to this
apparatus and may be dangerous. The use of approved charging
equipment is recommended to ensure optimum performance
and avoid damage to your phone. Ensure the voltage rating of
the Travel Charger is compatible with the area of use when
travelling abroad.
A Travel Charger (EB-CAD92Vxx* or EB-CAD95xx*) is
supplied with the Main Kit. Other recommended equipment for
charging -Car Charger (EB-CDD95),Handsfree Car Kit
(EB-HFD75Z).
Note* xx identifies the Charger region, e.g. CN, EU, HK, UK.
Switch off your cellular phone when in an aircraft. The use of
cellular phones in an aircraft may be dangerous to the operation
of the aircraft, disrupt the cellular network and may be illegal.
Failure to observe this instruction may lead to the suspension or
denial of cellular phone services to the offender, or legal action
or both.
It is advised not to use the equipment at a refuelling point. Users
are reminded to observe restrictions on the use of radio
equipment in fuel depots, chemical plants or where blasting
operations are in progress. Never expose the battery to
extreme temperatures (in excess of 60°C).
i
Important Information
It is imperative that the user exercises proper control of your
vehicle at all times. Do not hold a phone while you are driving;
find a safe place to stop first. Do not speak into a Handsfree
microphone if it will take your mind off the road. Always
acquaint yourself thoroughly with restrictions concerning the use
of cellular phones within the area you are driving and observe
them at all times.
Care must be taken when using the phone in close proximity to
personal medical devices, such as pacemakers and hearing aids.
For most efficient use hold the phone as you would any normal
phone. Your GD75 cellular phone is fitted with an internal
antenna, located in the upper portion of the phone, above the
display screen. To avoid deterioration of signal quality or
antenna performance, do not touch the antenna area while the
phone is switched on. Unauthorized modifications or
attachments may damage the phone and violate applicable
regulations. The use of an unapproved modification or
attachment may result in the invalidation of your guarantee –
this does not affect your statutory rights.
This Panasonic mobile phone is designed, manufactured and
tested to ensure that it complies with the specifications covering
RF exposure guidelines applicable at the time of manufacture, in
accordance with EU, USA FCC, and Australian ACA regulations;
or as specifically stated in the separate declaration leaflet
enclosed with this product.
Please refer to our website for latest information/standards
compliance in your country/region of use.
www.panasonicmobile.co.uk/2001/health
ii
Care and Maintenance
Care and Maintenance
Pressing any of the keys may produce a loud tone. Avoid holding
the phone close to the ear while pressing the keys.
Extreme temperatures may have a temporary effect on the
operation of your phone. This is normal and does not indicate a
fault.
Do not modify or disassemble the equipment. There are no user
serviceable parts.
Do not subject the equipment to excessive vibration or shock.
Avoid contact with liquids. If the equipment becomes wet
immediately remove the power and contact your dealer.
Do not leave the equipment in direct sunlight or a humid, dusty
or hot area.
Keep metallic items that may accidentally touch the terminals
away from the equipment.
Always charge the battery in a well ventilated area, not in direct
sunlight, between +5°C and +35°C. It is not possible to
recharge the battery if it is outside this temperature range.
Do not incinerate or dispose of the battery as ordinary rubbish.
The battery must be disposed of in accordance with local
legislation and may be recycled.
When disposing of any packing materials or old equipment
check with your local authorities for information on recycling.
iii
Quick Reference
Quick Reference
Q
abcd
Z
Z+Hold
Menu
Direction which the user can move around the display
screen using the Navigation key.
Press a key once for a particular phone operation.
“Press and hold” a key for a particular phone function.
Representation of screen menu option.
A
Phonebook key.
B
Right hand Option Key.
1- 0
iv
"Press (Z) to select".
Numeric key pads.
D
Answer a call or call a dialled number.
E
To end a call or return to Idle screen or Z +Hold
to switch the phone off.
Q
Indicates that a function is SIM Dependent.
R
Indicates that a function is Network Dependent.
#
Switches Discreet Mode on and off.
Contents
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Fitting the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Removing the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Fitting the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operation of Battery Level Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 3
Disconnecting the Fast Travel Charger. . . . . . . . . . . . . . . . . . . . . . . . 3
Low Battery Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting to Know Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
The Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Navigation Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
To Select a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Switching the Phone On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
International Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Automatic Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Caller Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Earpiece Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Locking the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting Vibration Alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting Discreet Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting Ring and Key Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Store a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Overwrite Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Browsing Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Retrieve a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Editing Phonebook Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Grouping Phonebook Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
My Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Personalising Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Add a Start-up Greeting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Download Melody. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Logos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Setting the Backlight Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using Voice Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Voice Dial Entry Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Recalling Voice Dial Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
v
Dialling Voice Dial Entries . . . . . . . . . . . . . . .
Editing the Voice Dial Entries . . . . . . . . . . . . .
Changing the Language . . . . . . . . . . . . . . . .
Restoring the Default Phone Settings . . . . . . . . .
Phone Security. . . . . . . . . . . . . . . . . . . . . .
Using Key Guard . . . . . . . . . . . . . . . . . . .
Disabling Key Guard. . . . . . . . . . . . . . . . . .
Changing the Security Codes . . . . . . . . . . . . .
Restricting Calls . . . . . . . . . . . . . . . . . . . .
Applications . . . . . . . . . . . . . . . . . . . . . . .
Clock . . . . . . . . . . . . . . . . . . . . . . . . .
Initially Setting the Home Time . . . . . . . . . . . .
Setting the Clock Format . . . . . . . . . . . . . . .
Altering the Time/Date . . . . . . . . . . . . . . . .
Setting the Clock for Summer Time . . . . . . . . .
Setting the Alarm . . . . . . . . . . . . . . . . . . .
Muting the Alarm . . . . . . . . . . . . . . . . . . .
Setting a Power On/Off Time . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . .
Currency Convertor . . . . . . . . . . . . . . . . .
Text Messages . . . . . . . . . . . . . . . . . . . . . .
Setting the Phone for Short Text Messages . . . . . .
Setting the Message Centre Number . . . . . . . . .
Creating a Text Message . . . . . . . . . . . . . . .
Receiving Text Messages . . . . . . . . . . . . . . .
Message Options . . . . . . . . . . . . . . . . . . .
Cut / Copy & Paste Message Text . . . . . . . . . .
Manage Messages Lists . . . . . . . . . . . . . . . .
Parameters . . . . . . . . . . . . . . . . . . . . . .
Call Information . . . . . . . . . . . . . . . . . . . . .
Recent Numbers . . . . . . . . . . . . . . . . . . .
Call Duration . . . . . . . . . . . . . . . . . . . . .
Call Charges. . . . . . . . . . . . . . . . . . . . . .
Setting the Unit Price . . . . . . . . . . . . . . . . .
Setting the Maximum Unit Level . . . . . . . . . . .
Setting a Warning Level . . . . . . . . . . . . . . . .
Call Identification . . . . . . . . . . . . . . . . . . .
Advanced Operation. . . . . . . . . . . . . . . . . . .
Diverting Calls. . . . . . . . . . . . . . . . . . . . .
Holding Calls and Call Waiting . . . . . . . . . . . .
Making a Second Call . . . . . . . . . . . . . . . . .
Receiving a Second Call . . . . . . . . . . . . . . . .
Accept a Second Call . . . . . . . . . . . . . . . . .
Reject a Second Call. . . . . . . . . . . . . . . . . .
End Current Call and Receive Second Call . . . . . .
Operation During Two Calls . . . . . . . . . . . . .
Call Transfer . . . . . . . . . . . . . . . . . . . . .
Multi-party Calls. . . . . . . . . . . . . . . . . . . .
Adding to Multi-party . . . . . . . . . . . . . . . . .
Splitting a Multi-party . . . . . . . . . . . . . . . . .
Ending Multi-party Calls . . . . . . . . . . . . . . . .
Ending a Multi-party Call . . . . . . . . . . . . . . .
Changing to a New Network . . . . . . . . . . . . .
vi
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
23
23
24
24
25
25
25
25
26
28
28
28
28
28
29
29
29
30
30
31
32
32
32
32
33
33
34
34
35
37
37
38
38
38
39
39
39
40
40
40
40
41
41
41
41
41
42
42
42
42
43
43
44
Schedule . . . . . . . . . . . . .
Creating a Reminder . . . .
Viewing Reminders . . . . .
Deleting Reminders . . . . .
Deleting Holiday Reminders
Jump to Future Date . . . .
Games . . . . . . . . . . . . . .
Racing Game . . . . . . . .
Ball Game . . . . . . . . . .
WAP Browser . . . . . . . . . .
Server Settings . . . . . . .
Activating the Browser . . .
Navigating Content . . . . .
The Browser Menu . . . . .
Using Bookmarks . . . . . .
Deactivating the Browser . .
Setting the Linger Time . . .
Last Error . . . . . . . . . .
Additional Features . . . . . . .
Desktop Handsfree . . . . .
Voice Memo. . . . . . . . .
Record a Voice Memo . . .
DTMF Tones . . . . . . . .
Note Pad . . . . . . . . . .
Second Clock . . . . . . . .
Setting Clock Display . . . .
Accessory Related Features .
Text Entry . . . . . . . . . . . .
T9® Text Input . . . . . . .
Other Text Modes . . . . .
Editing Text . . . . . . . . .
Menu Structure . . . . . . . . .
Trouble Shooting . . . . . . . .
Important Error Messages .
Glossary of Terms . . . . . . . .
Specifications . . . . . . . . . .
Phone (Including Battery)* .
EU Warranty . . . . . . . . . . .
Personal Record . . . . . . . . .
WAP Settings . . . . . . . .
Notes . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . .
. . . . . . .
. . . . . .
. . . . . .
. . . . . . .
. . . . . .
. . . . . .
. . . . . . .
. . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . .
. . . . . . .
. . . . . .
. . . . . .
. . . . . . .
. . . . . .
. . . . . .
. . . . . . .
. . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
45
45
45
45
46
46
47
47
47
48
48
49
49
49
50
51
51
51
52
52
52
52
53
54
54
54
55
56
57
57
57
58
59
61
63
65
65
66
71
71
72
vii
Getting Started
Getting Started
Thank you for purchasing this Panasonic digital cellular phone. This phone is
designed to operate on the Global System for Mobile Communications
(GSM), GSM900 or GSM1800. Ensure the battery is fully charged before
use.
Before operating this phone please read the “Important Information”
section - see page i.
These operating instructions detail use of the equipment contained in the
Main Kit.
Some services detailed, are network dependent and are indicated by
(R)or may only be available on a subscription basis. Some functions are
SIM dependent and are indicated by (Q). For more information contact
the Service Provider.
Fitting the SIM
The SIM is inserted into the
back of the phone underneath
the battery. Remove the
battery - see “Removing the
Battery” page 2. Unlock the
SIM retainer by sliding it up
towards the top of the phone
(1). Gently lower the SIM
retainer. Place the SIM into its
recess, ensuring the bevelled
corner is positioned in the top
left corner (2). Move the SIM
retainer back into position and
secure by sliding downwards.
The SIM retainer is properly
locked when it has clicked into
position (3).
Note: Ensure the SIM retainer is properly locked into position. Failure to
do so will inhibit the fitting of the battery and the battery cover.
1
Getting Started
Removing the SIM
Unlock the SIM retainer by
gently pushing towards the top
of the phone (1). Gently lower
the SIM retainer (2) and remove
the SIM (3). Ensure the SIM
retainer is correctly locked
before re-fitting the battery and
battery cover.
Fitting the Battery
Ensuring the label is uppermost,
locate the two lugs at the top of
the battery into the rear of the
phone (1). (The base of the
battery will stay slightly raised at
this point). Locate the two lugs
at the top of the battery cover
into the rear of the phone (2).
Using light pressure, push the
bottom of the battery cover into
place and lock by pushing up on
the battery cover release clip (3).
Removing the Battery
Push the battery cover release clip down (1). The base
of the battery cover will raise out of the recess (2).
Remove the battery cover. The battery can now be
removed from the phone (3).
2
Getting Started
Charging the Battery
Connecting the Fast Travel Charger
The battery must be fitted in the phone before
the charger is connected. Ensuring the arrows on
the plug are to the front of the phone. Insert the
charger into the base of the phone.
Note: DO NOT force the connector as this may damage the phone and/or
the charger.
Connect the charger to the mains power supply. The charging indicator will
light and the battery level indicator will scroll right to left when charging.
Operation of Battery Level Indicator
While charging
Phone on
Phone off
Charging complete
K
H
K
LCD Battery
Indicator off
When charging is complete turn off the mains power supply and disconnect
the charger from the phone. See “Disconnecting the Travel Charger”page
3.
Disconnecting the Fast Travel Charger
Disconnect the charger from the mains power supply.
Squeeze together the two buttons on the plug of the
charger (1) and while maintaining pressure extract the
plug from the base of the phone (2).
3
Getting Started
Low Battery Warning
When the battery power is low a warning tone will sound and a flashing
LOW BATTERY message will be displayed. If this occurs during
conversation, finish your call immediately. The power will automatically
shut off after the warning tone. Fully recharge the battery. See “Charging
the Battery” page 3. (Calls can be made and received while the phone is
charging)
It is recommended that the battery is fully discharged between charges to
maintain optimum battery life and performance.
Getting to Know Your Phone
Location of Controls
Navigation Key
Earpiece
Display
Earpiece/Microphone
Socket
g
B
A
D
E
Microphone
External Connector
Navigation key - moving up/down/left/right navigates through the
options in the Main Display area. Pressing this key activates the
function currently displayed in the Main Option area
Cancel key - this key is mainly used to cancel the current
operation and return to the previous menu level. In certain menus
it has other functions
Primarily used for accessing the Phonebook or switching character
types
Makes a call or recalls recently dialled phone numbers
Ends a call or Z+ Hold enables the user to switch the phone
on/off
4
Getting Started
1
Digit keys 0 to 9, * and # – # will switch on and off
Discreet Mode
The Menu System
The menu system allows the user to access all the functions of the phone
that are not accessible purely by key strokes.
Display Icons
Following some operations the display will automatically clear after three
seconds or after pressing any key.
Information Area
Main Display
Status Icons
Secondary
Option Area
Main Option
Area
Navigation Prompt
Status Icons
The status icons are displayed according to the currently activated
functions. The Antenna, Signal and Battery icons are displayed when the
handset is switched on and connected to a network.
Y
t
]
P
[
5
is displayed when you are registered to a non-home network roaming
is displayed when call divert is enabled
is displayed when vibration alert is enabled
is displayed when Discreet Mode is enabled
is displayed when all tones or ring volume is off
Getting Started
N
O
S
T
H
flashes when an unread message is stored or lights when
message area is full
is displayed when phone lock is enabled
indicates that it is possible to make emergency calls
indicates the received signal strength: \ - weak signal, T strong signal
indicates the battery level: H - full, G (flashing) - low battery
Information
Icons are used to indicate the current top level menu, the sub-menu
number, text entry mode, Phonebook source, Phonebook location number,
or the alarm set icon depending on the current mode of operation.
?
>
<
indicates alarm is set
indicates current Phonebook entry is sourced from the Mobile
Phonebook
indicates current Phonebook entry is sourced from the SIM
Phonebook
Navigation Prompt
p
This area indicates the available directions in which the
Navigation key can be pressed according to the current mode of
operation
Using the Menu System
The menu system provides the means for accessing all the functions which
do not have their own dedicated buttons on the keypad.
The menu functions are selected using the five-way Navigation key.
6
Getting Started
To Select a Function
Z Q then use the navigation key as a joystick to move around the icons
on the screen in any of the four directions (a,b,c,d). When a particular
menu is highlighted, Z Q, and a submenu is displayed. From any
submenu, use e until the required item is highlighted, Z Q
Example:
From Idle Z Q, select Personalise > Display Setting >
Animation Z Q
In detail:
1
Z Q to enter the menu system
2
Use db to highlight the Personalise menu
3
Z Q to enter the menu
4
Use a three times to highlight the Display Setting menu
5
Z Q to enter the menu
6
Use a twice to highlight Animation menu
7
Z Q to enter the menu
8
Use ab to select Off, Theme 1 or Theme 2 Z Q
Following some operations the display will automatically clear after three
seconds, if this is not the case Z E to return to Idle.
Shortcuts
When familiar with the layout of the menu, use the keypad to enter the
Menu Number. This will allow the user to obtain the required function
without having to navigate through the display menus. For example, Z
Q or g to enter the menu and then 143 to take you directly to
the Animation menu.
7
Basic Operation
Basic Operation
Switching the Phone On/Off
To switch the phone on or off Z+Hold E
When the phone is switched on a greeting will be displayed and then the
phone will go into Idle.
Making a Call
Ensure that the phone is switched on, the network operator logo is
displayed and the signal strength meter shows network coverage is available
in the current area.
1
Enter area code and phone number
2
ZD
International Dialling
Using the automatic international access code (+)
you will be able to dial international numbers
without having to know the code for the
international exchange.
List:
UK
UKR
URY
Ok
If the international number is known then it can be
entered in the normal fashion followed by the area
code and phone number.
1
From Idle Z+ Hold 0 until “+” is
displayed
2
Use e to cycle through the abbreviated
international names Z Q to choose the required code
3
Enter area code and phone number
4
Z D
Note: Many countries / regions include an initial “0” in the area code. This
should, in most cases, be omitted when dialling international numbers. If
you have difficulties making international calls, contact your Service
Provider.
8
Basic Operation
Emergency Calls
To make an emergency call the antenna symbol (S) must be present.
Enter 112 Z D or if no SIM is fitted to the phone Z QaQ
Automatic Redial
When a call is unsuccessful you may want the phone to redial the number
again automatically.
When your connection is unsuccessful, Z Q when Ok is displayed and
a timer will countdown in seconds to the next redial.
To stop redialling, press Q when Cancel is displayed in the main option
area or B when C is displayed in the secondary option area.
When a call is connected a beep will be emitted.
If a call is repeatedly unsuccessful you will not be able to automatically redial
the phone number. In this case you must redial the phone number
manually.
Ending a Call
Press E
Answering a Call
To receive a call the phone must be switched on and the signal strength
meter must be displayed.
Z any key except E to answer a call
Z E to reject the call
Z Q during an incoming call, and you will be given the option to
Accept or Reject the call. Use e to select an option and Z Q
If a call is not answered, or is rejected, the number of incoming calls missed
will be displayed.
Z any key to clear the display
Caller Identification
This feature allows you to identify incoming calls and accept or reject them.
The caller’s phone number, and name if stored in Phonebook, will be
displayed.
Note: Caller Identification may not always be available.
9
Basic Operation
Earpiece Volume Control
The volume level may be adjusted during a call:
Use a to decrease the volume, use b to increase the volume
Note: Volume control for Personal Handsfree accessory is adjusted in the
same manner.
Locking the Phone
With the Phone Lock enabled you will be restricted
to answer incoming calls and make emergency calls
only. The Phone Lock Code is factory set to “0000”.
1
From Idle Z Q, select Phone Menu
> Security > Phone Lock Z Q
2
Select Enable Z Q
3
Enter the 4-digit code, Z Q
The phone will be locked and the lock icon (O) will
be displayed.
Unlocking the Phone
To restore normal operation, enter your Lock Code Z Q. The lock
icon will be removed from the display. However, once you turn the phone
off and on again the Lock Code will need to be re-entered. When the
correct code has been entered Z Q.
Disabling Phone Lock
The phone must be unlocked before the phone lock can be disabled.
1
From Idle Z Q, select Phone Menu > Security > Phone
Lock Z Q
2
Select Disable Z Q
3
Enter the 4-digit code Z Q
Using the PIN
The PIN (Personal Identification Number) protects your SIM against
unauthorized use. If you enable the PIN, every time the phone is turned on
you will be prompted to enter the PIN.
The PIN2 controls security for the Fixed Dial Store, Call Charge metering
and Barred Dial.
10
Basic Operation
Enabling/Disabling the PIN
1
2
3
From Idle Z Q, select Phone Menu > Security > PIN
Z Q
Use a select Enable / Disable or Change PIN Z Q
Enter PIN (Between 4 and 8 digits)Z Q
Setting Vibration Alert
When required, the phone can be set up to vibrate when a call is received.
Vibration alert enables the user to choose between Continuous,
Intermittent vibration alerts when a call is received. Switching on vibration
alert will silence the ring volume. If, however, the ring volume is adjusted
after the vibration alert is switched on, or the Discreet Mode is switched
on, (see “Setting Discreet Mode” page 11 ) and its profile enables ring
tones, the phone will ring and vibrate when a call is received.
From Idle Z Q, select Personalise > Vibration Alert.
Choose the vibration setting required, Continuous, Intermittent
or Disable, Z Q
When activated, the phone will vibrate briefly.
Note: When Discreet Mode is enabled, it’s profiles will supercede those of
the Vibration alert.
Setting Discreet Mode
Discreet Mode will allow the user to choose between “Vibrate only”, “ring
tone only” or both.
1
From Idle Z Q select Personalise > Discreet Mode
Z Q
2
Use e to select Ring Volume or Vibration Z Q
3
Use e to select the required vibration type or ring tone volume
4
Z Q to select the required vibration type or ring tone volume
5
Z+ Hold #
Note: If the ring tone volume is increased beyond “Max” volume it will set
an escalating ring tone.
11
Basic Operation
Setting Ring and Key Volume
Changing either the ring volume/key volume is done in the same manner. If
you increase the ring volume above maximum it will set an escalating ring
tone. If you turn the ring volume off, the silent indicator icon ([) will be
displayed.
1
From Idle Z Q, select Personalise > Tones Z Q
2
Select Ring Volume or Key Volume Z Q
3
Use e to set the volume level Z Q
12
Phonebook
Phonebook
It is possible to store phone numbers in two locations:
In the SIM Phonebook (Q)
In the Mobile Phonebook. This means that if you change the SIM, the
numbers in the phone are not lost
The Mobile Phonebook has the advantage that you can group your
phonebook entries together.
Store a Number
To Store a Number in the SIM Phonebook
1
From Idle enter the phone number and
Location:
press A
(1-100)
2
To select SIM Phonebook Z Q
3
Enter the name – see “Text Entry” page 56,
Z Q twice
0-9 Any
4
Enter location number Z Q
You can choose not to enter a location number
and the entry will be placed in the next available location. Simply Z
Q when Any is displayed.
To Store a Number in the Mobile Phonebook
1
From Idle enter the phone number and
Group Name:
Z A
2
Use a to select Mobile Phonebook and
<1>
<2>
Z Q
<3>
3
Enter the name - see “Text Entry” page 56,
1
Select
Z a
4
Confirm phone number Z Q twice
5
Use e to select a group - see “Grouping
Phonebook Entries” page 16 - into which to
place the entry Z Q
6
Enter location number Z Q
A location number does not have to be specified, in this case the entry will
be placed in the next available location. Simply Z Q when Any is
displayed.
13
Phonebook
Overwrite Protection
If a location is occupied, a prompt will be displayed to confirm that the
current information is to be overwritten.
Z Q to overwrite the selected location
Z B to choose another location number
Note: If you amend an entry stored in your phonebook that has a Voice
Dial Command assigned to it, you will need to delete and reassign that
Voice Dial Command - see “Editing the Voice Dial Entries” page 23.
Browsing Phonebook
You can search the Phonebook by either Name or Location. The default
setting for browsing is by name. When browsing by name pressing a
lettered key will take you to the first entry starting with that letter.
1
From Idle Z Q, select Phonebook > Browse Z Q
2
Use e to toggle between Names or Loc. Nos. display mode
Z Q
3
Use e to select the Phonebook you wish to browse Z Q
Retrieve a Number
1
From Idle Z A
2
Use e to browse through the Phonebook
Once you have selected a phone number or name, there are a number
of actions that you can perform. To dial the selected number Z
D.
Note: The Phonebook you last viewed will be the default when you next
press A. To change the default, use the Phonebook menu to select a
particular phonebook.
Speed Dial a Number Stored in SIM Phonebook
1
2
3
From Idle Enter location number – leading zeros may be left out
Z #
Z D
Editing Phonebook Entries
It is possible to Detail, View, Recall, Edit, Delete or Create
information in the Phonebook. To access any of these functions follow the
same procedure for each one. With a phone number or name displayed:
14
Phonebook
Detail
Displays each element of the selected Phonebook entry. Use e to display
the next/previous element of the entry. Each element may be edited Z QaQ, edit as required Z Q twice to save any changes.
View
Displays an individual name and phone number in the names list.
If an e-mail address is present in the Mobile Phonebook this will be
displayed along with the name and number.
Recall
Displays the phone number, enabling you to either change it or call the
number.
Edit
Displays the entry allowing you to make changes as required. Z Q
twice to save any changes.
Delete
Deletes the entry from the Phonebook.
Create
Creates a new entry in the Phonebook
1
Use e to cycle through Detail, View, Recall, Edit, Delete or
Create
2
Z Q to select an option
15
Phonebook
Grouping Phonebook Entries
The ability to group phonebook entries together is an extra function of the
Mobile Phonebook.
Retrieving a Number from a Group
Groups are used to collect together types of Phonebook entries, for
example business and personal. Each group can be suitably titled for quick
access to the entries contained within.
An alert profile can be attributed to groups, or a phone number, thus
allowing incoming calls to be tailored to indicate the type of caller. See
“Using Alert Profiles” page 16.
1
From Idle Z Q, select Phonebook > Group Setting and
Z Q or from Idle Z A twice
2
Use e to select the group Z Q twice
3
Use e to select the entry required Z Q twice to recall the
number
Retitling Group Names
1
From Idle Z Q, select Phonebook > Group Setting
Z Q
2
Use e to select the group required Z Q
3
Use e to select Edit Z Q
Clear the current title and re-enter - see “Text Entry” page 56
4
Z Q twice to save any changes
Using Alert Profiles
Alert Profile enables you to identify callers with a particular ring tone,
display picture, making it easier to distinguish between callers or groups of
callers.
Creating an Alert Profile
1
2
3
4
5
From Idle Z Q, select Phonebook > Alert Profile Z
Q
Z Q twice to insert a new profile
Use e to select Personal or Group Z Q
Recall the phone number / select group from the Phonebook – see
“Retrieve a Number” page 14 Z Q
Z Q
16
Phonebook
6
7
Use e to select the ring tone that you wish to use for this profile
Z Q
Use e to select the picture Z Q
Hot Key Phone Numbers
It is possible to dial phone numbers from the Phonebook or Service Dial
part of Phonebook very quickly. Some Hot Key Phone numbers may be
reserved by the Service Provider, for example the first three Hot Key
Phone numbers may be linked to Service Dial (R).
1
Z + Hold a Digit key 1 - 9
2
Z D
Setting the Hot Key Dial Source
1
2
From Idle Z Q, select Phonebook > Hot Key Dial Z
Q
Use e to select SIM Phonebook or Mobile Phonebook and
Z Q
Service Dial Numbers
Your Service Provider may program some special phone numbers into your
SIM (R). It is not possible to modify the Service Dial numbers.
1
Z + Hold A
2
Z e to browse through the Service Dial list of phone numbers
The phone number pointed to can only be recalled or dialled.
Review the Phonebook
The Review function in the Phonebook menu shows how many locations
are available in the Phonebook.
1
From Idle Z Q, select Phonebook > Review Z Q
2
Use e to select SIM Phonebook or Mobile Phonebook
Z Q
A summary of the selected Phonebook will be displayed.
3
Use e to gain a detailed view of the Phonebook locations.
Occupied locations are shown with “w”
17
My Numbers
My Numbers
My Numbers is a convenient part of Phonebook where voice, fax and data
phone number(s) can be stored and viewed. (Q)
Adding Numbers
1
2
3
From Idle Z Q, select Phonebook > My Numbers Z
Q twice
Use e until Create is displayed Z Q
Enter the name - see “Text Entry” page 56, and use a
Note: If using T9® text input then move c before moving a otherwise an
alternative word will be selected.
4
5
Enter the phone number Z Q twice
Enter location number or select Any Z Q
Viewing Stored Numbers
1
2
From Idle Z Q, select Phonebook > My Numbers Z
Q
If more than one number is available then use e to cycle through
the listed numbers
18
Personalising Your Phone
Personalising Your Phone
Add a Start-up Greeting
A personalised greeting can be programmed for when the phone is
switched on.
1
From Idle Z Q, select Personalise > Display Setting >
Greeting Z Q
2
Use the text entry facility to add a greeting Z Q twice - see
“Text Entry” page 56
Displaying Animations
Animations can be displayed when the phone is switched on.
1
From Idle Z Q, select Personalise > Display Setting >
Animation Z Q
2
Use e to cycle through the animated themes available
3
Z Q to select either the desired theme, or switch off the
animation
Changing the Ring Tone
The ring tones of the phone can be changed to one of many pre-defined
sounds or to a voice ringer. (a voice recording used as a ring tone)
Each voice, fax, data and message can have a different ring tone.
Alternatively you can use the Melody Composer to generate a custom ring
tone. See “Composing a Melody" page 20.
Setting up a Pre-defined Ring Tone
It is possible to choose from a selection of tones and melodies.
1
From Idle Z Q, select Personalise > Tones > Ring
Type Z Q
2
Use e to select the appropriate call type to be changed Z Q
3
Use e to select the desired ring tone Z Q
Recording a Voice Ringer
1
2
19
From Idle Z Q, select Personalise > Tones > Voice
Ringer Z Q
Use e to select the appropriate voice ringer to be changed Z
Q
Personalising Your Phone
3
Z Q, start speaking into the microphone. The recording will
stop automatically, or before if Q is selected
To playback the recording use e to select the appropriate voice
ringer Z Q, select Playback Z Q
4
Composing a Melody
From Idle Z Q, select Personalise > Tones > Melody
Composer Z Q
Using the following table as reference, enter the notes (from the choice of
low, middle and high), rests, and the durations of each, to generate your
composition.
Note: At any time during composing press A to play back the current
melody.
When the composition is complete Z Q twice to save it.
Key
1st
press
2nd
press
3rd
press
4th
press
5th
press
6th
press
1
C
C#
low C
low C#
high C
high C#
2
D
D#
low D
low D#
high D
high D#
3
E
low E
high E
4
F
F#
low F
low F#
high F
high F#
5
G
G#
low G
low G#
high G
high G#
6
A
A#
low A
low A#
high A
high A#
7
B
low B
8
9
0
rest
*
1/8
1/16
1/1
½
1/4
#
½
1/1
1/16
1/8
1/4
20
Personalising Your Phone
Editing your Melody
Once the melody has been saved the following operations can be used for
re-editing purposes:
Z B to delete the character to the left of the cursor
Use g to navigate the cursor around the screen
Use the relevant keys to insert new notes/rests
Disabling all Tones
1
2
From Idle Z Q, select Personalise > Tones Z Q
Z Q to disable all tones. When Idle is resumed the silent
indicator icon ([) will be displayed
Repeat the process to enable all tones
Download Melody
Melodies may be downloaded to the phone from the Internet, via short text
messages.
For further information see:
http://www.panasonicmobile.co.uk/support/ringtones
Downloaded melodies overwrite pre-defined ring tone numbers 16-20.
When a message has been received containing a melody:
1
Z Q to acknowledge receipt of the melody
2
Use e to select the ring tone number to overwrite Z Q twice
The melody is now stored and can be selected as a pre-defined ring
tone.
Logos
Logos may be downloaded to the phone from the Internet, via short text
messages.
For further information see:
http://www.panasonicmobile.co.uk/support/logos
Downloaded logos overwrite 5 pre-defined logos in the logo menu.
When a message has been received containing a logo:
1
Z Q to acknowledge receipt of the logo
2
Use e to select the logo location Z Q twice
21
Personalising Your Phone
The logo is now stored and can be selected as an idle screen option from
the Personalise menu.
Setting the Backlight Time
1
2
3
From Idle Z Q, select Personalise > Display Setting >
Backlight Time Z Q
Use e to cycle through the times available
Z Q to select the desired time
Using Voice Commands
Before any of the phone’s voice activated functions can be used, it is
necessary to configure the phone so that it will recognize a particular voice
and intonation.
Voice Dial Entry Setup
This function allows the user to recall and dial numbers from the
Phonebook using voice commands.
1
From Idle Z Q, select Personalise > Voice Command
> Voice Dial Z Q
2
Z Q to add a new Voice Dial entry to the list
3
Browse through the Phonebook to select an entry which is to be
attributed with a voice command, Z Q twice
Note: Each recording is short in length, so be prepared to speak soon after
initiating the recording.
4
When ready, the user should hold the phone approximately 20cm
from his/her mouth, Z Q and speak clearly into the
microphone to record the name of the selected Phonebook entry
When the recording has stopped, it will be necessary to repeat the name.
5
When prompted, Z Q and repeat the name
When recording is completed for a second time, the display will indicate if
the recording was successful or not. If unsuccessful, repeat from step 4.
22
Personalising Your Phone
Recalling Voice Dial Entries
From Idle move and hold the navigation key (g) in any one of the four
directions a,b,c or d. Speak clearly the name you wish to recall (exactly
as recorded) and wait.
The above procedure will recall the phone number and the recorded Voice
Dial entry is repeated; to initiate the call Z D.
Dialling Voice Dial Entries
Using Permission
From Idle Z Q, select Personalise > Voice Command >
Permission Z Q
With this function enabled a recalled phone number is automatically dialled
without further intervention.
Repeat this process to disable the Permission function returning to Voice
Dial recall only.
Editing the Voice Dial Entries
It is possible to add to, play or delete any of the Voice Dial entries. With a
Voice Dial entry displayed:
Z Q and use e to select Add, Play or Delete Z Q to
select the desired option
Add
To add a new Voice Dial entry.
Play
To listen to the recording of a Voice Dial entry.
Delete
To delete an entry.
23
Personalising Your Phone
Changing the Language
It is possible to change the language that the phone uses for either display
messages and/or text entry.
1
From Idle Z Q, select Personalise > Language Z
Q
2
Use e to select Display Language or Tegic Language (text
entry) that you wish to change Z Q
3
Use e to select the desired language Z Q
Restoring the Default Phone Settings
Any personal settings can be returned to their factory default, with the
exception of some features, such as the Phone Lock code and the
Language.
1
From Idle Z Q, select Personalise > Defaults Z Q
2
Z Q to restore the default settings
24
Phone Security
Phone Security
The phone features a number of security functions that protect against
unauthorized use, and enable the user to restrict access to certain features see “Using the PIN” page 10. It is recommended that all security codes are
memorized. If it is necessary to make a note of any security codes, never
write them in a way that they can be recognized by another person. If
forgotten, contact the dealer for the Phone Lock Code or the Service
Provider for PIN and PIN2.
Using Key Guard
The Key Guard function is used to prevent any keys
from being accidentally pressed e.g. when the phone
is being carried.
From Idle Z Q, select Key Guard Z Q
twice to enable Key Guard or Z + Hold Q,
select Key Guard, Z Q twice.
Guard
Keypad?
Ok
When a call is received Key Guard will be disabled
temporarily, allowing the user to press any key
except E to answer the call. Emergency calls can
still be made - see “Emergency Calls” page 9.
Note: When making emergency calls with the “Key Guard” enabled, there
will be no audible or visual indication that the number is being dialled
Disabling Key Guard
Z Q
When Free Keypad: is displayed, use a to select Yes Z Q
Changing the Security Codes
1
2
3
4
5
6
25
From Idle Z Q, select Phone Menu > Security Z Q
Use e to select Phone Lock, PIN or PIN2 Z Q
Use e to select Change Z Q
Enter the current code Z Q
Enter the new code Z Q
Verify the new code Z Q
Phone Security
Restricting Calls
Call Barring
The Call Bar function is used to restrict certain outgoing and/or incoming
calls. Call Bar is controlled by a security password that is supplied by the
Service Provider. When updating or checking the status of Call Bar the
phone must be registered with a network. Different Call Bar restrictions
can be used for voice, fax and data calls. Any combination of call restrictions
can be set.
1
From Idle Z Q, select Phone Menu > Security > Call
Bar Z Q
2
Use e, select Bar Voice, Bar Fax or Bar Data Z Q
twice
3
Use e to select the level of call barring that needs to be applied
and Z Q
4
Enter Call Bar password and Z Q
Barred Dialling
The Barred Dial function enables the user to bar all phone numbers
pre-programmed in the SIM from being dialled on the phone. To use this
function PIN2 is required.
1
From Idle Z Q, select Phone Menu > Security > Barred
Dial Z Q
2
Enter PIN2 Z Q
Fixed Dial
The Fixed Dial Store is part of Phonebook, but with additional security.
When the security feature Fixed Dial is enabled it is only possible to make
calls with phone numbers that are in the Fixed Dial Store.
When Fixed Dial is enabled any manually dialled phone numbers must
match a phone number in the Fixed Dial Store.
To store, edit or delete a phone number in the Fixed Dial Store the Fixed
Dial function must be enabled. With Fixed Dial enabled, all phone numbers
can be added, edited or deleted as normal, but you will be prompted for
PIN2.
26
Phone Security
“Wild” Numbers
Wild numbers are spaces that can be stored in a phone number. The “wild”
numbers must be filled before the phone number is dialled. Used in
conjunction with Fixed Dial calls can be restricted, for example, to a specific
area by storing the area code of a phone and when recalled the remainder
can be added. The “wild” numbers can be anywhere within a stored phone
number.
1
Z+ Hold 0 until _ is displayed to enter a wild number
2
When the phone number is recalled pressing a numeric key will fill
in a “wild” number
27
Applications
Applications
Clock
This phone incorporates a clock with date/time, an alarm and a power
on/off feature.
A second clock for dual time is also included - see “Second Clock” page 54.
Initially Setting the Home Time
1
2
3
From Idle Z Q, select Applications
> Clock Function > Clock Set >
Home > Time Set Z Q
Enter the digits for the date in the format
day/month/year Z Q
Enter the digits for the time using 24 hour
clock Z Q
From Idle Z Q, select Applications >
Clock Function > Clock Set > Home >
Summer Time
Z Q to enable or disable Summer
Time
Time:
H:MM
0-9
Setting the Clock Format
1
2
3
From Idle Z Q, select Applications > Clock Function
> Clock Format > Display Format Z Q
Use e to cycle through the different clock and/or date formats
Z Q to select the desired clock display type
Altering the Time/Date
1
2
3
4
5
6
From Idle Z Q, select Applications > Clock Function >
Clock Set > Home > Time Set Z Q
Z+ Hold B to remove the current date
Enter the digits in the format day/month/year
Z Q to accept the date
Z+ Hold B to remove the current time
Enter the digits using 24 hour clock Z Q
28
Applications
Setting the Clock for Summer Time
1
2
From Idle Z Q, select Applications > Clock Function >
Clock Set > Home > Summer Time
Z Q to set Summer Time On or Off
Setting the Alarm
If the clock hasn’t been set, the user will be
prompted to do so prior to setting the alarm.
1.
2.
3.
4.
--:---:---:---:--
There are four separate alarms, each of which may
be set independently.
1
Set
1
From Idle Z Q, select Applications
> Clock Function > Alarm Set Z
Q
2
Use e to select the alarm to be set Z Q
3
Enter the digits for the time Z Q
4
Use e to select the frequency of the alarm Z Q
5
Use e to select the ring type Z Q
When the alarm has been set, ? will be displayed when the phone is in
Idle.
The alarm is activated in accordance with the current clock (Home or
Second).
Muting the Alarm
When the set time is reached the alarm will sound and the display will flash
with an alarm message. The alarm will sound for 30 seconds. If the alarm is
due during a call, it will activate vibration alert.
To end the alarm:
Z any key
Disabling the Alarm
1
From Idle Z Q, select Applications > Clock Function >
Alarm Set Z Q
2
Use e to select the alarm to be disabled Z Q twice
3
Use e to select Disabled Z Q
When disabled, following the same procedure will re-enable the alarm.
29
Applications
Adjusting the Alarm Time
1
2
3
4
5
6
From Idle Z Q, select Applications > Clock Function >
Alarm Set Z Q
Use e to select the alarm to be adjusted Z Q
Z+ Hold B to remove the current alarm time
Enter the digits for the time Z Q
Use e to select the frequency of the alarm Z Q
Use e to select the ring type Z Q
Setting a Power On/Off Time
The phone can be set to turn itself on or off automatically at a specified
time using the Power On/Off feature. The procedure for setting/adjusting
the Power On/Off automatically is similar to that for setting the time on the
clock. For either setting or adjusting the time needed to select Power On
Time or Power Off Time in the Clock Function menu.
Caution: Ensure that the setting of the Alarm or Power On function will
not contravene any regulations whereby it may automatically power on
when in an aircraft or medical facility etc. - see “Important Information”
page i.
Calculator
The four function calculator will enable the user to perform simple
arithmetic calculations (addition/subtraction/multiplication and division).
1
From Idle Z Q, select Applications > Calculator Z
Q
2
Enter a number (maximum 10 digits) and it will be displayed on the
upper right of the display. If a decimal point is required, Z+
Hold 1
3
Use g to select the arithmetic operation you wish to perform (b
to multiply, c to add, a to divide, d to subtract)
4
Enter a number (maximum 10 digits) and it will be displayed next to
the operation symbol
If g is used to select another arithmetical operation to perform, an
intermediate calculation will be performed and the result displayed on the
middle line.
5
Z Q to complete the calculation when = is displayed in the
centre of the operation field
30
Applications
Currency Convertor
The currency convertor enables the user to convert from/to a home
currency using a conversion rate that you enter.
From Idle Z Q, select Applications > Currency Z Q
Entering an Initial Conversion Rate
1
2
3
4
Z Q
Enter an abbreviation for the home currency (up to 3 characters)
Z Q twice
Enter an abbreviation for the foreign currency (up to 3 characters)
Z Q twice
Enter the currency conversion rate Z Q twice
Converting a Value
1
Check the conversion rate is the one you require Z Q twice
2
Enter the value to be converted Z Q twice
The conversion rate will be retained in the phone once entered. The next
time the convertor is used, the conversion rate / currency abbreviation can
be edited while in the Currency /rate display. Z Q, then use e to
select Edit Z Q.
Swapping the Currency Conversion
When you have accepted the conversion rate and are ready to enter the
value to be converted, you can swap the currencies to convert from the
foreign currency into the home currency.
1
Use e to select Swap Z Q
2
Enter the value for conversion Z Q twice
31
Text Messages
Text Messages
It is possible to receive, display, edit and/or send text messages of up to 459
characters, (Dependant on the language being used) to mobile phones on
the same network or any network that has a roaming agreement. Messages
will be sent as one message, but will be received as (up to) three messages.
(Dependant on the recipients phone parameters).
Setting the Phone for Short Text Messages
Before a message can be sent, it is necessary to enter the Message Centre
number into Parameters (the Service Provider will supply the Message
Centre number).
The Message Centre number may have been preprogrammed on the SIM.
Setting the Message Centre Number
From Idle Z Q, select Messages > Parameters >
Message Centre Z Q
Enter message centre number in international dial format – see
“International Dialling” page 8 .
Creating a Text Message
1
From Idle Z Q, select Messages >
Create Z Q
Hello
Create a text message (up to 459 characters) see “Text Entry” page 56
Menu
Z + Hold 1- 0 to enter character menu.
Z B to exit the character menu
2
Use g to navigate through the message and add or delete text
3
Z Q twice
The user may be prompted to send the message, if the message is not to
be sent Z C, the message will be stored.
4
Z Q and enter the destination phone number (or recall a
number from the Phonebook) - see “Retrieve a Number” page 14
Z Q twice
32
Text Messages
5
The user may be asked if delivery confirmation is required. If not
required use e to select No Z Q. If yes, use e to select Yes
Z Q
The default setting for delivery confirmation can be enabled/disabled using
the Report parameter in the Parameters menu.
Receiving Text Messages
When a Short Text Message is sent to the phone the message indicator
(N) will flash in the display, with an audible tone or vibration. This indicates
that a new message has been received.
When Read is displayed Z Q to read the message. Use g to
navigate through the message and to identify the sender and the time
the message was sent.
Note: If the message indicator is displayed constantly (does not flash) this
indicates that the message area is full and you will need to delete old
messages in order to be able to receive new messages in the future.
Message Options
Reply to a Message
When a message is received and read the option to reply to the sender may
be selected.
Z Q twice. This will allow the user to create a reply message
Delete a Message
1
Z Q
2
Use e to select Delete Z Q to delete the message
To enable the auto-deletion of messages - see “Parameters” page 35.
Edit a Message
1
2
Z Q
Use e to select Edit Z Q to edit the message
Z Q, this will give the option to send the edited message - see
“Creating a Text Message” page 32. Z B if it is not necessary to send
the message and it will be stored in the Send List.
33
Text Messages
Cut / Copy & Paste Message Text
This function allows the user to cut or copy message text from a user
defined message or a user created message, into a new or existing message.
It can also be used to paste text to a previously sent message - See “Edit a
Message” page 33.
1
When message text is displayed, Z Q, select Cut or Copy
Z Q
2
Use g to position the cursor at the beginning of the text to be cut
or copied Z Q
3
Use g to highlight the required text Z Q
The cut or copied text will remain in the phone memory until other text is
cut or copied.
4
Select the required text screen for cut or copied text to be pasted
into Z Q
5
Select PasteZ Q
To cut or copy text from a received message, select Forw’d and repeat
steps 1 - 3.
Manage Messages Lists
All messages, whether sent or received, will be stored on the SIM until they
are deleted. Selecting a stored message allows it to be replied to, edited or
deleted.
Receive List
Messages received will be stored in the Receive List. A N in the receive
list, indicates an unread message.
When reading a message the sender’s information is displayed below the
text. Press e to show the sender’s ID (if available), the time the message
was sent and the message centre number. Z Q twice allows the user
to reply to the message.
Send List
When a message has been sent or edited it will be stored in the Send List.
Create
This allows the user to create a new message or reply to a received
message.
34
Text Messages
Chat SMS
Chat, will enable the user to read sent and received messages on one
screen when in Chat SMS mode.
Review
Review allows you to check usage of the message area.
Parameters
From Idle Z Q, select Messages > Parameters Z Q
The following parameters can be set:
Recipient Group
Recipient Group enables the user to pre-define the destination of text
messages.
Auto Delete
When set will erase messages automatically:
Received Read - will overwrite the oldest read message.
Received Any - will overwrite the oldest message, even though it may
not have been read.
Lifetime
This is the duration that your message is stored at the Message Centre.
Delivery attempts will be repeated until the message has been delivered or
the Lifetime expires.
Message Centre
Allows the Message Centre phone number to be edited - see “Setting the
Phone for Short Text Messages” page 32.
Report
When your message has been delivered a confirmation will be received if
Report is set to Yes.
Protocol
The Message Centre may be able to convert the message to the format
specified by the selected protocol.
35
Text Messages
Broadcast
You need to specify the topic(s) of information that you wish to receive as
broadcasts before you can receive them.
1
From Idle Z Q, select Messages > Broadcasts >
Topics Z Q
2
Z Q twice to insert a new topic
3
Use e to cycle through the available topics
4
Z Q to insert the currently displayed topic into your broadcast
list
Enabling/Disabling Broadcasts
1
From Idle Z Q, select Messages > Broadcasts Z
Q
2
Select Receive Z Q
When enabled, following the same procedure will disable broadcasts.
Message List
This is a store for the last received broadcast messages. Messages can be
deleted from here.
Language
The language in which broadcast messages are displayed can be changed
(R).
36
Call Information
Call Information
Recent Numbers
Recently dialled phone numbers will be stored in Last Dialled.
If Caller Identification is available the caller’s phone number, for an
answered call will be stored in the Answered menu and an unanswered
call will be stored in the Unanswered menu.
If Caller Identification is not available then calls will still be stored but will
have the date and time attributed to them.
When the store is full the next phone number will overwrite the oldest.
1
From Idle Z D
2
Use e to select Last Dialled, Answered or Unanswered
Z Q
3
Use e to select the phone number (or name) you wish to redial
Z D
You can edit or delete the phone number before dialling – see “Editing
Phonebook Entries” page 14.
If you wish to store the selected number in Phonebook, Z A while
the number is displayed – see “Store a Number” page 13.
Calling the Last Dialled Number
To redial your last called phone number Z D twice.
Returning an Unanswered Call
When the display shows that you have received calls but not answered
them.
1
Z Q
The last caller’s phone number will be displayed if it is available.
2
Use e to select the phone number you wish to dial
3
Z D
37
Call Information
Call Duration
1
From IdleZ Q, select Phone Menu > Call Service >
Calls Z Q
Note: The Calls function is SIM dependent (Q). If the SIM does not
support this function then items under Calls menu will be found directly
under Call Service menu.
2
Use e to select one of the functions described below, and Z
Q
The Last Call function will display the duration and call charge if available, of
the last call during Idle mode, or the current call during a call. Times are
indicated as: hours (0-99), minutes (0-59), seconds (0-59) - HH:MM:SS.
The All Calls function displays the accumulated duration and call charge, if
available, of Incoming and Outgoing calls. The lock code or PIN2 is required
to reset the timer and call charge.
Call Charges
To maintain control over the cost of calls that are made, the phone can be
set to restrict use to a finite number of units overall. (Q)
Setting the Unit Price
Firstly, a price per unit must be entered. This is the cost that the Service
Provider charges for one unit of call time. (Q)
1
From Idle Z Q, select Phone Menu > Call Service >
Service Charges > Price/Unit Z Q
2
Z Q to edit the values
At this point you will be asked to enter your PIN2 or Lock code Z Q.
3
Enter a currency unit (up to three characters) e.g. GBP Z Q
twice
4
Enter a price Z Q twice
38
Call Information
Setting the Maximum Unit Level
This function allows the user to pre - determine the maximum cost of calls
made. (Q)
1
From Idle Z Q, select Phone Menu > Call Service >
Service Charges > Max Cost Z Q
2
Z Q twice to edit the values
At this point you will be asked to enter your PIN2 or lock code Z Q.
3
Enter a value (number of units) which is to be the maximum
permitted, and the corresponding cost will be displayed
4
Z Q twice to accept
Note: The duration of one unit may vary during the day, peak and off-peak
times. Therefore, the call charge can be calculated accordingly. However,
call charge information may not give an accurate reflection of the tariffs
charged by your Service Provider.
Setting a Warning Level
A warning can be set as an indication that the maximum cost is about to be
reached. This function is SIM dependent.
1
From Idle Z Q, select Phone Menu > Call Service >
Service Charges > Warning at Z Q
2
Z Q twice to edit the value
3
Enter a value (in units) at which time you would like the warning to
sound Z Q twice
Call Identification
In the Call Service menu, the Caller’s ID and Withhold ID functions allow
you to check the status of whether a Caller’s Identification is sent or can be
received. (Withhold ID R)
Note: When checking the status the phone must be registered with a
network.
39
Advanced Operation
Advanced Operation
Diverting Calls
Voice, fax and data calls can be diverted using different circumstances and
to different numbers. For example you may wish voice calls to be diverted
to Voicemail in the event that the phone is switched off.
1
From Idle Z Qselect Phone Menu > Call Divert Z
Q
2
Use e to select the type of calls to divert, Z Q twice
3
Use e to select the circumstances to initiate the divert Z Q
4
Enter phone number to divert to Z Q twice
When a divert situation is enabled the divert icon (t) is displayed.
When updating or checking the status of Call Divert the phone must be
registered with a network. (Q)
Holding Calls and Call Waiting
Holding a Call
During a call:
1
Z Q
2
Use e to select Hold Z Q
Resuming a Call
1
2
Z Q
Use e to select Resume Z Q
Making a Second Call
1
Enter phone number (or recall from Phonebook – see “Retrieve a
Number” page 14)
2
Z D
The first call will be placed on hold.
40
Advanced Operation
Receiving a Second Call
A second call can be received, if Call Waiting is switched on. This is enabled
from the Phone Menu > Call Service menu. It is not possible to have
more than one fax or data call. All voice calls must be ended before you can
make or receive a fax or data call. (Q)
Accept a Second Call
1
Z Q
2
Use e to select Accept Z Q
The current call will be placed on hold.
Reject a Second Call
1
2
Z Q
Use e to select Reject Z Q
End Current Call and Receive Second Call
1
2
Z E with a waiting call
Z any key except E or g
Operation During Two Calls
Swapping Between Calls
The ! prompt in the display screen, indicates the current call
1
Z Q
2
Use e select Swap Z Q
End Current Call
1
Z Q
2
Use e to select End Z Q
The held call will remain held.
End Both Calls
Z E
41
Advanced Operation
Call Transfer
With two calls connected, Call Transfer enables the user to connect them
together ending your connection, leaving the other parties to talk together.
(Q)
When two calls are in use:
1
Z Q
2
Use e to select Trans. Z Q
The two calls will be connected to each other and your call will be ended.
Note: Two call transfer cannot be utilized while in Multi-party mode.
Multi-party Calls
A Multi-party call enables three to five people to be in conversation at the
same time. It is possible to swap between a Multi-party call and another call
in the same way as with two separate calls. (Q)
Enabling Multi-party
With two calls connected (one active, one on hold):
1
Z Q
2
Use e to select Merge Z Q
A Multi-party call has been enabled, all three people will be able to talk to
each other.
Adding to Multi-party
It is possible to add to the Multi-party call (up to a maximum of five). Either
by making a call or accepting an incoming call. The call can then be merged
into the Multi-party.
Note: When making a call or accepting an incoming call the Multi-party call
will be placed on hold. The callers in the Multi-party call can continue to
communicate with each other while on hold.
Splitting a Multi-party
The user can select an individual from the Multi-party and remove their
connection. This enables you to talk privately without the participation of
the rest of the Multi-party.
42
Advanced Operation
During a Multi-party call:
1
Z Q
2
Use e to select Option Z Q
3
Use e to select a caller in the Multi-party
4
Z Q
5
Use e to select Split Z Q
The selected caller will be split from the Multi-party call and the Multi-party
call will be placed on hold (the remaining Multi-party call callers can still
communicate).
Ending Multi-party Calls
The user can either select an individual in the Multi-party and end the call or
end the entire Multi-party call. If a call is held, or an other call is incoming
then an individual call cannot be ended.
Ending a Single Connection
During a Multi-party call
1
Z Q
2
Use e to select Option Z Q
3
Use e to select a caller in the Multi-party
4
Z Q
5
Use e to select End Z Q
Ending a Multi-party Call
During a Multi-party call:
Z E to end all the calls at once
43
Advanced Operation
Changing to a New Network
When not in your home Country / Region, the user may use a network that
is not directly subscribed to, this is called ROAMING. National Law may not
permit roaming in your home region.
The New Network function is used to manually select a network that is
available in your current location.
1
From Idle Z Q, select Phone Menu > Network > New
Network Z Q
2
Use e to select one from the list of available networks Z Q
An X will be displayed in the information area if you cannot register with
the selected network.
When the Search Mode is set to Automatic the phone will automatically
reselect a new network in order to maintain optimum network availability.
With the Search Mode set to Manual the phone will only use a selected
network. If coverage is lost another network should be selected.
The Network List is used when the Search Mode has been set to
Automatic. The location numbers in the Preferred Network List show the
search priority.
Selecting Insert stores a new network in the currently displayed location
and then moves other networks down, Edit overwrites the old network
with a new one, and Add stores a new network at the end of the list.
44
Schedule
Schedule
The Scheduler can be used to register reminders for personal events as well
as planning holiday periods.
Caution: Ensure that any settings made in the Scheduler will not
contravene any regulations whereby the phone may automatically power
on when in an aircraft or medical facility etc. - see “Important Information”
page i.
Creating a Reminder
From Idle Z Q, select Schedule Z Q
1
Use the Navigation key (g) to select the date for your reminder
2
Z Q twice to create a new entry when the required date is
highlighted
3
Enter the digits for the time using 24 hour clock Z Q twice
4
Use e to select the frequency of the reminder Z Q
When selecting Daily, Weekly or Yearly you will be given the option of
using the “Repeat Count”, which allows you to set the frequency of the
alarm.
5
Enter the memo for the reminder – see “Text Entry” page 56,
Z Q twice
6
Use e to select a ring type for the reminder Z Q
To indicate that a reminder has been set, the date will appear as a white
number on a dark background.
Viewing Reminders
When in the Schedule menu, select the required date using the
Navigation key (g) Z A to view reminders for that date
Deleting Reminders
1
2
3
4
45
From Idle Z Q, select Schedule Z Q
Use g to select the required date of the reminder Z A
Use e to select the reminder to be deleted Z Q
Use e to select Delete Z Q twice
Schedule
Setting a Holiday Reminder
1
2
From Idle Z Q, select Schedule Z Q
Use the Navigation key (g) to select the day of your holiday Z
Q
3
Use e to select Function Z Q
4
Use e to select Holiday Set Z Q
5
Use e to select Day, Day of the week Z Q three times to
update the Holiday List
Repeat process for each day of holiday as required.
Deleting Holiday Reminders
To delete holiday reminders:
1
From Idle Z Q, select Schedule Z Q
2
Use the Navigation key (g) to select the day of your holiday to be
deleted Z Q
3
Use e to select Function Z Q
4
Use e to select Holiday Set Z Q
5
Use e to select Holiday List, Z Q to select date for deletion
Z Q twice
To delete ALL Holiday Reminders select All Clear Z Q twice.
Note: To indicate that a holiday reminder has been set, the date/s will be
encapsulated in a clear box.
Jump to Future Date
1
2
3
4
5
From Idle Z Q, select Schedule Z Q
Z Q
Use e to select Jump Z Q
Z + Hold B to remove the current date
Using 0 - 9 enter the date (using chosen date format) to
which you want to ‘jump’ to Z Q twice
46
Games
Games
Racing Game
The object of the game is to control a racing car around a circuit avoiding
other cars in the fastest time possible & avoiding obstacles on the track i.e.
Oil spillages.
Each time a new game is started, the player is credited with three “lives”.
Play the Game
1
From Idle Z Q select Games >Racing GameZ Q,
twice
2
Use e to select a skill level Z Q to enter the game screen
Approximately three seconds after entering the game screen, the timer will
begin.
3
Use e to change the gears enabling the car to accelerate and slow
down/stop. (b to accelerate or a to slow down or stop)
There is a gear change indicator on the right hand side of the display,
showing current gear position.
4
Use f to change lateral direction of the car during the race
Ball Game
The object of the game is to control a character between elevating
platforms and achieve a high score without allowing the character to fall to
the bottom of the screen or to get hit by a fireball.
A life will also be lost if the character is allowed to the top of the screen.
Play the Game
1
From Idle Z Q select Games > Ball Game Z Q
2
Use e select GAME STARTZ Q
3
Use f select difficulty level Z Q
After a short demonstration, the game will begin.
4
Use fto control the character between the platforms
The current score is displayed on the right hand side of the screen.
47
WAP Browser
WAP Browser
The phone’s WAP (Wireless Application Protocol) Browser enables the
user to access Internet services supported by the network, such as news,
weather reports, sport etc.
Server Settings
Before Internet services can be accessed, the SIM must be data enabled and
the relevant configuration information, entered into the phone.
These settings may have been pre-programmed by the network operator.
Note: Modifying previously entered settings can cause failure of the
Browser.
1
From Idle Z Q, select Browser > Browser Setting >
Server Setting Z Q
2
Two servers may be setup on the phone. Use e to select one or
other of the server settings Z Q
3
Use e to select Edit Z Q
A list of configuration parameters will be displayed. The parameter Name
will be highlighted and Edit will be displayed.
4
Z Q
5
Enter the name of the WAP server Z Q twice
6
Use e to select each of the other parameters in turn, edit the
information Z Q twice
7
After all parameters have been entered, Z B to return to
the previous menu level
8
Select the server setting that you have just edited Z Q. Use e
to select Set Z Q
Record your WAP settings in the table at the rear of this booklet for
easy reference.
48
WAP Browser
Activating the Browser
To activate the Browser:
From Idle Z Q, select Browser > Start Browser Z Q
The first time that the browser is activated there will be no content stored
so the Home URL content will be displayed (as defined by the network
operator). The Home URL will be recalled from the cash, each time the
browser is activated. (Cache is the phone’s memory that stores content
downloaded in the past). When recalling content from cache the phone
remains off-line (not connected to a WAP server).
Navigating Content
Use the Navigation key (g) to scroll through the content on the screen as
follows:
Use e to scroll up/down on the current page
Use d to return to the previous page
Use c to return to the next page (only applicable if returned to
previous page)
When linked text (underlined text) is highlighted Z Q to load the page
represented by the link.
(
)
~
'
indicates a table - with View displayed Z Q to view contents
of table
Indicates an image which cannot be displayed
Indicates on-line browsing (Non Secure)
Indicates on-line browsing (Secure)
The Browser Menu
The Browser also contains its own menu which is applicable when content
is currently being displayed (either on-line or off-line).
To access the Browser menu Z A when Menu is displayed at the
bottom.
This menu is used as follows:
Home Deck
Displays the Home URL content as defined by the network operator.
49
WAP Browser
Bookmark
Use, add, delete and rename bookmarks.
Enter URL
Type in a URL directly to go to a known site .
Reload
Will reload and update the current page.
Reset
Deletes the content in cache and displays the Home URL content.
Exit
Deactivates the Browser.
Using Bookmarks
Frequently accessed pages may be bookmarked to save time. This prevents
the need to re-enter the URL each time.
Adding a Bookmark
1
2
3
While viewing content Z A
Use e to select Bookmark
Z Q twice to register the bookmark
Recalling Pages Using Bookmarks
1
2
3
With content displayed Z A
Use e to select Bookmark Z Q
Use e to select the relevant bookmark from the list, Z Q
Renaming a Bookmark
1
2
3
4
5
With content displayed Z A
Use e to select Bookmark Z Q
Use e to select the relevant bookmark from the list, Z A
Z Q
Z + Hold B to remove the bookmark name, then re-type
the name required Z Q twice
50
WAP Browser
Deleting Bookmarks
1
2
3
4
With content displayed Z A
Use e to select Bookmark Z Q
Use e to select the relevant bookmark from the list, Z A
Use e to select Delete Z Q twice
Deactivating the Browser
The Browser can be deactivated as follows:
When browsing on-line Z E to review cache off line.
When browsing off-line Z E to return to Idle mode.
Setting the Linger Time
The phone will be automatically disconnected from the WAP server after a
set period of non-interaction. This period is defined in seconds by the
Linger Time setting.
1
From Idle Z Q, select Browser > Browser Setting >
Linger Time Z Q
2
Z + Hold B to remove the current linger time, then
re-enter the value required Z Q twice
Last Error
If an error should occur when using the Browser, use this function to
inform the network operator of the last error which occurred with the
phone, to assist with a diagnosis of the problem.
From Idle Z Q, select Browser > Browser Setting > Last
Error Z Q
51
Additional Features
Additional Features
Desktop Handsfree
Desktop Handsfree enables you to hold a conversation without having to
hold the phone to your ear.
Note: Do NOT hold the phone to your ear in Handsfree mode.
Swapping Between Handsfree and Handheld Calls
During a Handheld call:
1
Z Q
2
Use e to select H’free Z Q
During a Handsfree call:
Z Q twice to revert for Handheld operation
Answering a Call Handsfree:
To answer a call using Handsfree Z+ Hold D
Voice Memo
You can record a two-way conversation during a call. If a different SIM is
installed any voice memos will be lost.
Caution: Security of a recorded message is your responsibility. You MUST
ask for the other party’s consent before recording.
Record a Voice Memo
Z Q
Use e to select Memo Z Q
A tone will sound when recording starts. When the recording stops a tone
will sound.
If you Z Q while recording a voice memo, recording will stop but no
tone will sound to either party.
52
Additional Features
Play Back a Voice Memo
From Idle Z Q, select Applications > Voice Memo Play
> Playback Z Q
To stop playing, Z Q twice
The Note Pad function is available during playback - see “Note Pad” page
54.
Volume Control During Playback
While playing back:
Use e to adjust the volume of the voice memo
Delete Memo
From Idle Z Q, select Applications > Voice Memo Play
> Delete Z Q twice
DTMF Tones
DTMF tones can be sent during conversation. These are often used to
access voice mail, paging and computerized home banking. For example,
you may need to input a number to remotely access voice mail messages. A
phone number may be stored in the Phonebook with DTMF tones, allowing
the number to be dialled upon recall and the DTMF number to be sent
automatically.
Send DTMF Tones During a Call
Enter digits (0 to 9, # and *)
Pause Dial
Using pauses allows you to send DTMF tones automatically.
1
Enter phone number
2
Press and hold 0 until a P is displayed at the end of the phone
number entered
3
Enter DTMF digits after the pause, e.g. enter the number to access
voice mail messages.
4
Z D
When the call is successful DTMF tones will be sent after 3 seconds or
Z D to send the DTMF tones manually.
If the DTMF tones are unsuccessful then the destination of your call may
require that the length of the tones be increased.
53
Additional Features
5
6
From Idle Z Q, select Personalise > DTMF Length
Z Q
Use e to select Long Z Q
Note Pad
During a call numbers can be entered which you may wish to dial when the
call has ended.
During a call:
1
Enter phone number
2
When the call has ended Z D to call that number
To store in Phonebook, Z A while the number is displayed – see
“Store a Number” page 13.
Second Clock
The Second Clock can either be set to auto-adjusting, whereby the second
time will be automatically set from the code of the current network, or a
specified time difference can be set manually.
Setting Clock Display
1
2
From Idle Z Q, select Applications > Clock Function
> Clock Format > Display Pattern Z Q
Use e to select Second Time or Home Time Z Q
Setting Auto Adjustment
If travelling to a country / region which has a roaming agreement with the
users’ home network, the Second Clock will be automatically adjusted.
However, for countries / regions which have several time zones in the same
area manual adjustment is required.
1
From Idle Z Q, select Applications > Clock Function
> Clock Set > Second > Auto Adjustment > Home area
Z Q
2
Use e to select your home area Z Q
54
Additional Features
Enabling Auto Adjustment
From Idle Z Q, select Applications > Clock Function >
Clock Set > Second > Auto Adjustment > Auto
Adjustment Z Q
Repeat to disable Auto Adjustment.
Setting Manual Adjustment
1
2
From Idle Z Q, select Applications > Clock Function
> Clock Set > Second > Time Difference Z Q
Use e to select the time difference required Z Q to set the
value
Setting Summer Time
From Idle Z Q, select Applications > Clock Function >
Clock Set > Second > Summer Time Z Q
Once enabled, following the same procedure will disable Summer Time.
Accessory Related Features
When Auto Answer is switched on, and Personal Handsfree is connected, a
call will be answered without pressing any keys. Any call waiting should be
answered in the normal way.
This is also applicable to the Handsfree Car Kit accessory.
See the documentation provided with the relevant Accessory for
operation details.
55
Text Entry
Text Entry
The phone provides a means for entering alphanumeric characters to enter
details into the Phonebook, to create text and e-mail messages etc. This
section details the characters that can be entered and the relevant keys to
press.
Text Mode
Key
®
T9
0
Alternatives
1
Punctuation
2
Normal
(ABC)
Greek
(ÁÂÃ)
Extended
(AÄÅ)
Numeric
(0 - 9)
+_
+_
+_
0+P_
.@/:;*#+-”,!¡?¿_()[]{}’&%\^~|<>=_£$¥¤§
1
abc
ABCabc
ABÃ
AÄÅÆBCÇaäåæàbc
2
3
def
DEFdef
ÄÅÆ
DEÉFdeéèf
3
4
ghi
GHIghi
ÇÈÉ
GHIghiì
4
5
jkl
JKLjkl
ÊËÌ
JKLjkl
5
6
mno
MNOmno
ÍÎÏ
MNÑOÖØmnñoöøò
6
7
pqrs
PQRSpqrs
ÐÑÓ
PQRSpqrsß
7
8
tuv
TUVtuv
ÔÕÖ
TUÜVtuüùv
8
9
wxyz
×ØÙ
WXYZwxyz
9
WXYZwxyz
*
*
*
Shift/Lock
Shift/Lock
#
Space
Space
@
Space
Space
#
* Z * once to enter a single capital letter (subsequent characters
will be lower case). Z * twice acts as a keyboard CAPS LOCK
function and subsequent characters will be uppercase. Z * a third
time, to return to lowercase character entry.
Alternatively, Z+ Hold any of the numeric keys to enter the character
menu, which allows the user to navigate around the menu (g) until the
required character is highlighted.Z Q to select.
Z C to return to the message screen.
56
Text Entry
®
T9 Text Input
Using this mode of text entry dramatically reduces the number of key
presses required:
Press a key once for any letter you require on that key. The desired letter
may not be displayed. Continue pressing other keys until the end of a word
is reached; then check that the word has been typed correctly before
continuing on to the next word.
If the combination of letters typed has produced a word which is not the
one you require, press 0 repeatedly until the correct word is displayed.
Continue to the next word.
If the word you require is not in the internal dictionary (i.e. It is a proper
noun or a rarely used word) then it should be entered using the Normal
(U) mode.
Other Text Modes
To access any of the other text entry modes use A to cycle through until
the desired mode is displayed in the Information Area.
When using Normal (U), Greek (V) or Extended (W) text entry
modes, each time a key is pressed in quick succession it will display the next
character available on that key (or if the key is pressed and held down it will
cycle through the available characters). Releasing the key, or pressing
another key will enter the currently displayed character and the cursor will
move to the next position.
Editing Text
Pressing e will move you up or down one text line (or field in Phonebook).
Pressing f will move you left or right one character. When the cursor is
moved over a character and another key pressed this will insert the new
character immediately before the selected character. Pressing B will
delete the character to the left of the cursor or delete the current line
when pressed and held.
T9® is a trademark of Tegic Communications Inc.T9® Text Input is licensed under one
or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928,
and 6,011,554; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No.HK0940329; Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; and
additional patents are pending worldwide.
57
Menu Structure
Menu Structure
From Idle Z Q to display a menu of phone features. To select a
feature, use gto navigate to the icon of the feature you require.
Z Qwhen the icon is highlighted.
To exit the current menu and return to the previous level Z B. To
exit completely out of the menu structure, Z +Hold B, or E
(except during a call).
During a call a restricted menu will be available.
1 Personalise
Language
Tones
All Tones
Ring Volume
Ring Type
Melody Composer
Voice Ringer
Key Volume
Key Tone Type
Warning Tone
Voice Command
Voice Dial
Permission
Display Setting
Idle Screen
Greeting
Animation
Contrast
Backlight Time
Vibration Alert
Continuous
Intermittent
Disable
Discreet Mode
Ring Volume
Vibration
Continuous
Intermittent
Disable
User Msg.
Auto Answer
DTMF Length
Defaults
1
2
2 Games
Racing Game
Ball Game
3 Phonebook
Browse
Create
Alert Profile
Group Setting
Review
My Numbers2
Hot Key Dial
4 Key Guard
5 Browser
Start Browser
Browser Setting
Linger Time
Last Error
Server Setting
6 Messages
Receive List
Send List
Create
Chat SMS
Review
Parameters
Broadcasts2
7 Phone Menu
Call Service
Calls
*Last Call
Function is Network Dependent (R)
Function is SIM Dependent (M)
* Will move up a level if the SIM does not support Calls function
All calls
Call Waiting1
Caller's ID
*Withhold ID
*My number
*Service Charges
Call Divert
Voice Calls
Fax Calls
Data Calls
Cancel All
Status
Security
Phone Lock
Call Bar1
PIN2
PIN22
Fixed Dial2
Barred Dial2
Network
New Network
Search Mode
Network List
*
*
*
8 Applications
Games
Voice Memo Play
Download Data1
Melody
Logos
Clock Function
Clock Set
Clock Format
Alarm Set
Power On Time
Power Off Time
Calculator
Currency
9 Schedule
58
Trouble Shooting
Trouble Shooting
Should any problem persist contact your dealer.
Problem
Cause
Phone will not
switch on
Extremely short
battery life for a
new battery
Remedy
Check that the battery is fully
charged and correctly
connected to the phone
The network you are
using and the
condition of the
battery can affect
battery life
Short battery life The battery has worn
for an old battery
out
Replace with a new fully
charged battery
The charging
The battery is not
Leave the phone charging the
indicator does attached to the phone
battery for a few minutes
not light, the
or when the battery
before the indicator is lit and
battery level
has been deeply
attempting to switch it on
indicator does
discharged the phone
not appear and
will take a short time
the phone cannot
until the indicator
be switched on
lights
when charging
The battery is not
attached to the phone
Battery fails to
charge
59
Battery has been
connected to the
phone after AC
adaptor has been
switched on
Ensure the battery is fitted to
the phone prior to
commencing charging.
Trouble Shooting
Calls cannot be
made
The phone is
locked
Unlock the phone
Outgoing calls are
barred
Disable the outgoing call barring,
or barred dial
The phone is not
registered to a
network
Move to a coverage area and
operate your phone after it has
registered with a network.
Calls cannot be
made from Fixed
Dial Store
Calls cannot be
received
Check your SIM supports Fixed
Dial
Check if the Fixed Dial is
switched on
Check the phone number is
stored in the Fixed Dial
The phone is not
switched on
Switch the phone on
Incoming calls are
barred
Disable the incoming call barring
The phone is not
registered to a
network
Move to a coverage area and
operate your phone after it has
registered with a network.
Emergency calls
cannot be made
You are not in a
GSM coverage
area
Check that the antenna symbol S
is displayed - move to a coverage
area and operate your phone
when the antenna symbol is
displayed
Phone numbers
cannot be
recalled from
Phonebook
The phone is
locked
Unlock the phone
Phone number has
been restricted
Switch off restriction
60
Trouble Shooting
Important Error Messages
These are some of the most important error messages which may be
displayed:
Area Not
Allowed
Roaming in the selected area is not allowed
Network Not
Allowed
Roaming with the selected network is not allowed
Security Failure
The network has detected an authentication failure
because your SIM is not registered with that network
- contact your Service Provider
SIM Blocked /
Contact Service
provider
The SIM is blocked because one of the PIN/PIN2
unblocking keys (PUK/PUK2) has been entered
incorrectly ten times - contact your Service Provider
SIM Error
The phone has detected a problem with the SIM switch the phone off and then back on; if the message
is still displayed contact your Service Provider
SIM Invalid
The SIM has failed one or more of the SIM
personalisation checks - contact your Service Provider
Function
Unavailable
The selected feature is either not supported by the
SIM or is not available with the current subscription contact your Service Provider
PIN2 Invalidated
The PIN2 is blocked permanently because the wrong
PUK2 has been entered ten times, services controlled
by PIN2 cannot be used - contact your Service
Provider
Message Rejected A message has been received but the message store is
Store Full
full - to receive messages, delete some of the
currently stored messages or set messages to Auto
Delete
Phone Number
Too Long
(Max:20)
The edited or newly created Phonebook number is
too long for the SIM
Warning Store
Full Continue?
The message area is full. Your messages cannot be
stored until some of the currently stored messages
are deleted
61
Trouble Shooting
Verification
Failure
On changing the phone lock code, verification of the
new code is incorrect - retry changing the lock code
with correct verification
Incorrect Lock
Code
Disabling or enabling the lock code has failed due to
incorrect entry of the lock code - re-enter lock code
Incorrect PIN /
PIN2 / PUK /
PUK2
The entered code is incorrect - re-enter code
correctly
Auto Redial List
Full
Redial list of unsuccessfully dialled numbers is full switch the phone off and then on again
62
Glossary of Terms
Glossary of Terms
Cut
Permanently removes selected text from short text
message
Copy
Copies selected text from short text message without
removing it from the original message
DTMF Tones
Dual Tone Multi-Frequency tones allow you to
communicate with computerized phone systems,
voice mailboxes etc.
GSM
Global System for Mobile Communications. The name
given to the advanced digital technology that your
phone uses.
Network
Operator
The organization responsible for operating a GSM
network.
Password
Used for the control of the Call Bar. Supplied by your
Service Provider.
PIN
Personal Identification Number used for SIM security.
Supplied by your Service Provider. If the PIN is
entered incorrectly 3 times, the PIN will be blocked.
PIN2
Personal Identification Number used for the control of
Fixed Dial Store and Call Charge metering. Supplied
by your Service Provider. If the PIN2 is entered
incorrectly 3 times, the PIN2 will be blocked.
PUK/PUK2
PIN/PIN2 Unblocking Key. Used to unblock the
PIN/PIN2. Supplied by your Service Provider. If the
PUK/PUK2 is entered incorrectly 10 times, the
PUK/PUK2 will be blocked.
Registration
The act of locking on to a GSM network. This is
usually performed automatically by your phone.
Roaming
The ability to use your phone on networks other than
your Home network.
Service
Provider
The organization responsible for providing access to
the GSM network.
63
Glossary of Terms
SIM
Subscriber Identity Module. A small smart-card which
stores unique subscriber and user-entered information
such as Phonebook and Short Messages. Supplied by
your Service Provider.
WAP
Wireless Application Protocol. The communication
standard which enables you to download resources
from the Internet to your phone
64
Specifications
Specifications
Phone (Including Battery)
Type
Temperature Range
Charging
Storage
Weight
Dimensions (mm)
Height x Width x Depth
Supply Voltage
Standby Time (hrs)
Talk Time (Min)
Charge Time (Phone off)
*
GSM900 Class 4
GSM1800 Class 1
+5ºC - +35ºC
-20ºC - +60ºC
82g*
Antenna
SIM Type
106 x 46 x 16
3.7V DC, 650mAh Li-ion
Up to 150
Up to 360
Up to 90m (Travel Charger)
Up to 120m (Car Charger)
Internal
3V only
phonebook Memory
Animation Themes
Voice Memo
User Composed Melody
Downloadable Melody
Recordable Ringer
Games
Back light colours
Ring tones
Scheduler
Alarms
200 + SIM
2
2 x 16 seconds
One
Up to 5
2 x 10 seconds
2
1 (Light Blue)
23 Fixed & Variable
Up to 100 Entries
4
Note: Charge time will be longer when the phone is turned on. Battery life
is affected by the network being used and the condition of the battery.
65
EU Warranty
EU Warranty
EU/EEA-Wide guarantee is applicable in the EU/EEA and Switzerland.
Panasonic GSM European Service Guarantee Conditions
Dear Customer,
Thank you for buying this Panasonic digital cellular telephone. The Panasonic GSM European Service
Guarantee only applies while traveling in countries other than where the product was purchased.
Your local guarantee is applicable in all other cases. If your Panasonic GSM telephone requires service
while abroad, please contact the local service company shown on this document.
The Guarantee
The applicable period of the European wide guarantee for GSM is generally 12 months for the main
body and 3 months for the rechargeable battery. With respect to a product used in a country other
than a country of purchase, notwithstanding what is stated in the conditions below, the customer will
benefit, in that country of use, from these guarantee periods of, respectively, 12 and 3 months, if
these conditions are more favorable to him than the local guarantee conditions applicable in such
country of use.
Conditions of Guarantee
When requesting guarantee service the purchaser should present the warranty card together with
proof of purchase, to an authorized service centre.
The guarantee covers breakdowns due to manufacturing or design faults; it does not apply to other
events such as accidental damage, however caused, wear and tear, negligence, adjustment,
modification or repair not authorized by us.
Your sole and exclusive remedy under this guarantee against us is the repair, or at our option the
replacement, of the product, or any defective part or parts. No other remedy, including, but not
limited to, incidental or consequential damage or loss of whatsoever nature shall be available to the
purchaser.
This is in addition to and does not in any way affect any statutory or other rights of consumer
purchasers. This guarantee applies in countries shown on this document at the authorized service
centres detailed for that country.
UK
Service Centres in the UK
England:
Tel. +44 8705 159159
Ireland:
Tel: +353 1 2959966
D
Panasonic Service Center Dresden
SERKO GmbH
Großenhainer Straße 163
01129 Dresden
Tel. +49 (0)351/ 85 88 477
Panasonic Service Center Cottbus
Petsch Kundendienst GmbH
Am Seegraben 21
03058 Gross-Gaglow
Tel. +49 (0)355/ 58 36 36
Panasonic Service Center Leipzig
KES Keilitz-Electronic-Service GmbH
Föpplstraße 19
04347 Leipzig
Tel. +49 (0)341/ 244 33 33
Panasonic Service Center Chemnitz
WPS Rundfunk- u. Fernsehservice GmbH
Zietenstraße 16
09130 Chemnitz
Tel. +49 (0)371/ 40 10 359
Panasonic Service Center Berlin
SERKO GmbH
Schwedter Straße 34a
10435 Berlin
Tel. +49 (0)30/ 44 30 3221
Panasonic Service Center Berlin
RUESS SYSTEMS
Thrasoltstraße 11
10585 Berlin
Tel. +49 (0)30/ 342 2013
Panasonic Service Center Rostock
warnow electronic service gmbh
An der Jägerbäk 2
18069 Rostock
Tel. +49 (0)381/ 82 016
Panasonic Service Center Hamburg
ELVICE Service GmbH
Spaldingstraße 74
20097 Hamburg
Tel. +49 (0)40/ 23 08 07
Panasonic Service Center Rendsburg
FERNSEH-DIENST B&W Service GmbH
Kieler Straße 41
24768 Rendsburg
Tel. +49 (0)4331/ 14 11-0
Panasonic Service Center Bremen
COM Elektronik Service GmbH
Rübekamp 50
28219 Bremen
Tel. +49 (0)421/ 691 80 69
66
EU Warranty
Panasonic Service Center Hannover
COM Elektronik Service GmbH
Vahrenwalder Straße 311
30179 Hannover
Tel. +49 (0)511/ 37 27 91
Panasonic Service Center Magdeburg
SERKO GmbH
Ebendorfer Chaussee 47
39128 Magdeburg
Tel. +49 (0)391/ 289 90 69
Panasonic Service Center Düsseldorf
VTH GmbH
Kölner Straße 147
40227 Düsseldorf
Tel. +49 (0)211/ 77 90 25
Panasonic Service Center Essen
Bernd van Bevern GmbH
Heinrich-Held-Straße 16
45133 Essen
Tel. +49 (0)201/ 84 20 220
Panasonic Service Center Osnabrück
Petsch Kundendienst GmbH
Pagenstecherstraße 75
49090 Osnabrück
Tel. +49 (0) 541/ 68 038
Panasonic Service Center Wiesbaden
J. Hemmerling - VAD GmbH
Ostring 7
65205 Wiesbaden
Tel. +49 (0)6122/ 90 91 10
Panasonic Service Center Mannheim
N. Schaaf
Reichenbachstraße 21-23
68309 Mannheim
Tel. +49 (0)621/ 72 787-0
Panasonic Service Center Stuttgart
Hans Beck
Friedrich-List-Straße 38
70771 Leinfelden-Echterdingen
Tel. +49 (0) 711/ 94 701-0
Panasonic Service Center Reutlingen
Herbert Geissler
Lichtensteinstraße 75
72770 Reutlingen
Tel. +49 (0)7072 / 92 96-0
Panasonic Service Center München
G.Berghofer & W.Kaller GmbH
Helene-Wessel-Bogen 7
80939 München
Tel. +49 (0)89/ 318 907-0
Panasonic Service Center Augsburg
Klaus Bienek
Affinger Straße 4
86167 Augsburg
Tel. +49 (0)821/ 70 70 75
Panasonic Service Center Nürnberg
Herbert Geissler GmbH
Friedrich-Ebert-Straße 21
90537 Feucht
Tel. +49 (0)9128/ 70 76-0
Panasonic Service Center Eisenach
Blitz Elektro-Elektronik-GmbH
Bahnhofstraße 17
99817 Eisenach
Tel. +49 (0)3691/ 29 29 42 8
67
A
Service-Zentren in Österreich
Funk Fuchs GmbH & CoKg Unterhart 90
4642 Sattledt
Tel. +43 7244 733
Funktechnik Seissl
Dorf 79
6330 Schwoich
Tel. +43 5372 8217
Elektro Oberndorfer
Linzer Straße 2-4
4840 Vöcklabruck
Tel. +43 7672 72889
Panasonic Austria Handelsges.mbH Laxenburger
Straße 252
1232 Wien
Tel. +43 222/61080
FR
CETELEC
ZI de la Delorme
5 Avenue Paul héroult
13015 MARSEILLE
Tél. : 04 96 15 77 77
Tél. : 04 91 58 07 55
CORDON Electronique
BP 460
ZI Taden
22107 DINAN CEDEX
Tél. : 02.96.85.82.20
Fax : 02.96.85.82.21
EASY REPAIR
26 rue des Cosmonautes
31400 Toulouse
Tél. : 05.62.71.48.14
Fax : 05.62.71.48.15
EASY REPAIR
22 boulevard des Brotteaux
69006 Lyon
Tél. : 04.72.83.02.02
Fax : 04.78.52.40.38
ELECTRONIQUE SERVICE
Avenue Figuières
ZAC Font de la Banquière
34970 LATTES
Tél. : 04.67.15.96.30
Fax : 04.67.20.04.72
GENERAL ELECTRONIQUE
16 rue Joseph Cugnot
Z.I. Bracheux
60000 BEAUVAIS
Tél. : 03.44.89.79.00
Fax : 03.44.05.16.96
Négoce Technique etMaintenance
40 boulevard Bessières
75017 PARIS
Tél. : 01.44.85.21.66
Fax : 01.42.29.60.05
S.B.E.
Z.I. de la Liane
BP 9
62360 SAINT LEONARD
Tél. : 03.21.10.10.21
Fax : 03.21.80.20.10
EU Warranty
NL
Service-centra in
Nederlands
Panasonic-Centre Nederland
(Servicom bv)
P.O Box 16280
2500 BG
Den-Haag
Nederland
Tel. +31 703314314
Zonweg 60
2516 BM
Den-Haag
Nederland
Tel. +31 703314314
I
Per i Centri Assisitenza in Italia
Servizio Clienti
Tel. +39 02/ 67072556
E
Panasonic España, S.A.
Servicio de Atención a Usuarios:
Tel: 902 15 30 60
DK
For nærmeste servicecenter ring Panasonic
Danmark
Tel. +45 43 20 08 50
S
Firmor i Sverige
Komrep
Rosenlundsgatan 4
411 20 Göteborg
Tel. +46 031-173354
Signalstyrkan
Kungsholmstorg 4
104 22 Stockholm
Tel. +46 08-6542500
CR service
Industribyn 3
232 37 Malmö
Tel. +46 040-430030
PLAY-SHOP SERVICE Keskuskatu 3
00100 Helsinki
Puh. +358 09 27053626
MEGAFIX KY
Louhenkatu 9
74100 Iisalmi
Puh. +358 017 14631
T: MI.M.HAAPOJA
Miilukatu 7
40320 Jyväskylä
Puh. +358 014 677121
OUTOKUMMUN PUHELIN Pohjoisahonkatu 9
83500 Outokumpu
Puh. +358 013 562211
SETELE OY
Rengastie 31
60100 Seinäjoki
Puh. +358 06 4148344
TURUN J-MARKKINAT OY Tuureporinkatu 6
20100 Turku
Puh. + 358 02 2332685
N
Servicesenter i Norge
Norsk Elektronikksenter
Fetveien 1
2007 Kjeller
Tlf: +47 63 80 45 00
Panasonic Norge AS
Østre Aker vei 22
0508 Oslo
Tlf: +47 22 91 68 00
GR
ÊÝíôñá ôå÷íéêÞò õðïóôÞñéîçò
INTERTECH S.A.
International Technologies
Áöñïäßôçò 26, 167 77 Åëëçíéêü
Tá÷. Èõñ.: 738 21, 167 10 ÅËËÇÍÉÊÏ
Ôçë. ÊÝíôñï: (01) 9692.300
ÕðïêáôÜóôçìá Âüñåéáò ÅëëÜäáò:
Ê. ÊáñáìáíëÞ 11, 54638 ÈÅÓÓÁËÏÍÉÊÇ
Ôçë. ÊÝíôñï: (031) 245.840-3
P
SF
Huoltokeskukset Suomessa:
KAUKOMARKKINAT OY
PANASONIC-HUOLLOT Kutojantie 4
02630 Espoo
Puh. +358 09 521 5151 Huolto
Puh. +358 09 521 5155 Varaosat Ja Tarvikkeet
SETELE OY
Vanha Viertotie 7
00300 Helsinki
Puh. +358 09 549100
Centros de Assistência em Portugal
PAPELACO, S.A.
Vale Paraiso - Ferreiras
8200 ALBUFEIRA
ALGARVE
Tel. +351 89 589960
PAPELACO, S.A.
Largo de Santos, 9
1200 LISBOA
Tel. +351 1 3970539
PAPELACO, S.A.
Largo do Tribunal, Lote 11
2400 LEIRIA
Tel. +351 44 28071
68
EU Warranty
PAPELACO, S.A.
Rua Cidade de Santos, 31R/C
9000 FUNCHAL
MADEIRA
Tel. +351 91 231523
PAPELACO, S.A.
Rua do Outeiro,
Lote 25 - Gemunde
4470 MAIA
PORTO
Tel. +351 2 944 0354/9
PAPELACO, S.A.
Rua Major Leopoldo da Silva,
Lote 3
3500 VISE
Tel. +351 32 424771
B
Centres de service apres-vents en Belgique
BROTHERS
Heavily 167
2630 AARTSELAAR
Tel. +32 03/887 06 24
HENRIETTA
Rue du Campinaire 154
6240 FARCIENNES
Tel. +32 071/39 62 90
PIXEL VIDEOTECH
Rue St Remy 7
4000 LIEGE
Tel. +32 041/23 46 26
DELTA ELECTRONICS
Rue P.d’Alouette 39
5100 NANINNE
Tel. +32 081/40 21 67
ELEKSERVICE FEYS Houthulstseweg 56
8920 POELKAPELLE
Tel. + 32 057/48 96 37
AVS WAASLAND Lavendelstraat 113
9100 ST NIKLAAS
Tel. +32 03/777 99 64
A.V.T.C SA
Kleine Winkellaan 54
1853 STROMBEEK-BEVER Tel. + 32 02/267 40
19
RADIO RESEARCH
Rue des Carmélites 123
1180 BRUXELLES
Tel. +32 02/345 68 56
VIDEO TECHNICAL SERVICE
Av. du Roi Albert 207
1080 BRUXELLES
Tel. +32 02/465 33 10
SERVICE CENTER Kapellestraat 95
9800 DEINZE
Tel. +32 09/386 76 67
TOP SERVICE
Westerloseweg 10
2440 GEEL
Tel. +32 014/54 76 24
TELECTRO SC
Quai des Ardennes 50
4020 Liège
Tel. +32 041/43 29 04
69
L
Centres de service apres-vents au Luxembourg
NOUVELLE CENTRAL RADIO
Rue des Jones 15
L - 1818 Howald
Luxembourg - Grand Duché
Tel. +32 40 40 78
CH
Jonh Lay Electronics AG
Littauerboden
6014 Littau
Phone: +41 41 259 9090 Fax: +41 41 252
0202
TR
TEKOFAKS ISTANBUL CENTRE OFFICE
KAÐITHANE CADDESI SEVÝLEN SOKAK NO. 58
80340 ÇAÐLAYAN-ISTANBUL
Tel: 90-212-220 60 70 / 14 Lines
Fax: 90-212-220-60 94
ANKARA BRANCH OFFICE
GÜVEN MAH.FARABI SOKAK NO: 38/6 06690
KAVAKLIDERE- ANKARA
Tel: 90-312-467 30 94/2 Lines pbx
Fax: 90-312 467 85 38
ÝSMÝR BRANCH OFFICE
CUMHURÝYET BULVARI NO:330 K.:6 D.:608 SEVÝL
ÝÞ MERKEZÝ 35520 ALSANCAK-ÝZMÝR
Tel: 90-232-464 29 01 pbx
Fax: 90-232-422 67 44
BURSA BRANCH OFFICE
ÞEHREKÜSTÜ MAHLLESÝ DURAK CADDESÝ NO.:7
BURSA
Tel: 90-224-225 10 46 pbx
Fax: 90-224-223 81 03
ADANA BRANCH OFFICE
REÞATBEY MAH.FUZULÝ CAD.GÜLEK SÝTESÝ A
BLOK NO: 75b 01120 ADANA
Tel: 90-322-458 39 52 pbx
Fax: 90-322-453 21 32
TRABZON BRANCH OFFICE
MARAÞ CAD.MARAÞ APT.NO:51 D.:2 61200
TRABZON
Tel: 90-462-321 33 08
Fax: 90-462-326 37 78
ANTALYA BRANCH OFFICE
ALTINDAÐ MAH. 146 SOKAK ÖZKOÇ
APT.NO:9/1-2A ANTALYA
Tel: 90-242-243 23 70 / 3 Lines
Fax: 90-242-243 23 72
DÝYARBAKIR BRANCH OFFICE
LÝSE CADDESÝ GÖKALP APT.NO: 18/A
DÝYARBAKIR
Tel: 90-412-228 73 00
Fax: 90-412-223 59 00
EU Warranty
EU/EEA-Wide Guarantee: Conditions applicable in any country other than the country
of original purchase.
A When the purchaser finds the appliance to be defective, he should promptly contact the proper
sales company or national distributor in the EU/EEA country where this guarantee is claimed, as
indicated in the “Product Service Guide” or the nearest authorized dealer together with this
guarantee and proof of date of purchase.
The purchaser will then be informed whether:
(i) the sales company or national distributor will handle the repair service: or
(ii) the sales company or national distributor will arrange for trans-shipment of the appliance to
the EU/EEA country where the appliance was originally marketed; or
(iii) the purchaser may himself send the appliance to the sales company or national distributor in
the EU/EEA country where the appliance was originally marketed.
B If the appliance is a product model which is normally supplied by the sales company or national
distributor in the country where it is used by the purchaser, then the appliance, together with
this guarantee card and proof of date of purchase, should be returned at the purchaser’s risk and
expense to such sales company or distributor, which will handle the repair service. In some
countries, the affiliated sales company or national distributor will designate dealers or certain
service centres to execute the repairs involved.
C If the appliance is a product model which is not normally supplied in the country where used, or
if the appliance’s internal or external product characteristics are different from those of the
equivalent model in the country where used, the sales company or national distributor may be
able to have the guarantee repair service executed by obtaining spare parts from the country
where the appliance was originally marketed, or it may be necessary to have the guarantee
repair service executed the sales company or national distributor in the country where the
appliance was originally marketed.
In either case, the purchaser must furnish this guarantee card and proof of date of purchase. Any
necessary transportation, both of the appliance and of any spare parts, will be at the purchaser’s
risk and expense, and there may be a consequent delay in the repair service.
D Where the consumer sends the appliance for repair to the sales company or national distributor
in the country of use of the appliance, the service will be provided on the same local terms and
conditions (including the period of guarantee coverage) as prevail for the same model appliance
in the country of use, and not the country of initial sale in the EU/EEA. Where the consumer
sends the appliance for repair to the sales company or national distributor in the EU/EEA
country where the appliance was originally marketed, the repair service will be provided on the
local terms and conditions prevailing in the country of initial sale in the EU/EEA.
E Some product models require adjustment or adaptation for proper performance and safe use in
different EU/EEA countries, in accordance with local voltage requirements and safety or other
technical standards imposed or recommended by applicable regulations. For certain product
models, the cost of such adjustment or adaptation may be substantial and it may be difficult to
satisfy local voltage requirements and safety or other technical standards. It is strongly
recommended that the purchaser investigates these local technical and safety factors before
using the appliance in another EU/EEA country.
F This guarantee shall not cover the cost of any adjustments or adaptations to meet local voltage
requirements and safety or other technical standards. The sales company or national distributor
may be in a position to make the necessary adjustments or adaptations to certain product
models at the cost of the purchaser. However, for technical reasons it is not possible to adjust
or adapt all product models to comply with local voltage requirements and safety or other
technical standards. Moreover, where adaptations or adjustments are carried out the
performance of the appliance may be affected.
G If in the opinion of the sales company or national distributor in the country where the appliance
is used the purchaser has the necessary adjustments or adaptations to local voltage requirements
and technical or safety standards properly made, any subsequent guarantee repair service will be
provided as above indicated, provided the purchaser discloses the nature of the adjustment or
adaptation if relevant to the repair. (It is recommended that the purchaser should not send
adapted or adjusted equipment for repair to the sales company or national distributor in the
country where the appliance was originally marketed if the repair relates in any way to the
adaptation or adjustment).
H This guarantee shall only be valid in territories subject to the laws of the European Union and
the EEA.
Please keep this guarantee with your receipt.
70
Personal Record
Personal Record
The Serial Number can be found on the outside of the phone under the
battery. For your convenience we recommend that you note the
following details as a record of your purchase.
Part Number
Serial Number
Dealer Name
Purchase Date
WAP Settings
Use the table below to record your WAP settings.
71
Item
Hint
Name
WAP Server Name
Home URL
URL of Server
Security
Secure or Unsecured
Digital Dial #
Phone Number
Analog Dial #
Phone Number
Circuit Type
Analog, Digital or Auto
PPP ID
Name
PPP Password
Password
Gateway IP
IP Address
Current Setting
Notes
Notes
72
BULL CP8 PATENT
© Matsushita Communication Industrial UK Limited 2001
Information in this document is subject to change without notice. No part of these
instructions may be reproduced or transmitted in any form or by any means without
obtaining express permission from Matsushita Communication Industrial UK Limited
Printed in UK
www.panasonicmobile.co.uk
GD7 5 DPK1 1 A
Download PDF

advertising