Panasonic DPMB350 Operating instructions

Panasonic DPMB350 Operating instructions
MB350-PNQW1864ZA-QRG-en.PDF Page 1 Friday, July 10, 2009 4:26 PM
Quick Reference Guide
Multi-Function Printer
Model No.
DP-MB350
Do NOT connect the unit to a computer with the USB cable until prompted to do so during the
setup of Multi-Function Station (CD-ROM).
1
Accessory information:
To ensure that the unit operates properly, we
recommend the use of Panasonic toner
cartridge and drum cartridge.
■ Replacement accessory
– Toner cartridge
L Model No. (Part No.): DQ-TCB008
– Drum cartridge
L Model No. (Part No.): DQ-DCB020
■ Optional accessory
– Lower input tray
L Model No. (Part No.): DA-LCB350
2
The supplied Setup CD-ROM provides the
Operating Instructions in PDF format with a
detailed description on how to use the unit.
Adobe® Reader® is required to view them.
Please read before using the unit and save
the CD-ROM for future reference.
You can select the English or Spanish
language.
The display and reports will be in the selected
language. The default setting is English. If you
want to change the setting, see the operating
instructions (feature #110).
MB350-PNQW1864YA-QRG-en.book Page 2 Friday, January 22, 2010 10:56 AM
User record (for your future reference)
Date of purchase
ENERGY STAR:
L As an ENERGY STAR® Partner, Panasonic has
determined that this product meets the ENERGY
STAR guidelines for energy efficiency. ENERGY
STAR is a U.S. registered mark.
Serial number (found on the rear of the unit)
Dealer’s name and address
Dealer’s telephone number
Attach your sales receipt here.
Note:
L Save the original carton and packing materials for
future shipping and transportation of the unit.
L After unpacking the product, take care of the packing
materials and/or power plug cap appropriately.
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
L This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material - special
handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate
L The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a computer or
other electronic device, including fax machines, to
send any message unless such message clearly
contains in a margin at the top or bottom of each
transmitted page or on the first page of the
transmission, the date and time it is sent and an
identification of the business or other entity, or other
individual sending the message and the telephone
number of the sending machine or such business,
other entity, or individual. (The telephone number
provided may not be a 900 number or any other
number for which charges exceed local or longdistance transmission charges.)
In order to program this information into your fax
machine, you should complete the instructions from
the operating instructions.
2
Trademarks:
L Adobe and Reader are either registered trademarks
or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
L All other trademarks identified herein are the
property of their respective owners.
Copyright:
L This material is copyrighted by Panasonic System
Networks Co., Ltd., and may be reproduced for
internal use only. All other reproduction, in whole or
in part, is prohibited without the written consent of
Panasonic System Networks Co., Ltd.
© Panasonic System Networks Co., Ltd. 2009
MB350-PNQW1864ZA-QRG-en.book Page 3 Friday, July 10, 2009 4:26 PM
Table of Contents
1. Table of Contents
Table of Contents (Quick
Reference Guide)
1. Important Information
Important Information
1.1
1.2
1.3
1.4
1.5
1.6
For your safety............................................... 4
Important safety instructions ......................... 6
Moving the unit .............................................. 6
Illegal copies.................................................. 6
Display messages ......................................... 7
FCC and Other Information ........................... 8
3
MB350-PNQW1864ZA-QRG-en.book Page 4 Friday, July 10, 2009 4:26 PM
1. Important Information
1 Important
1Detailed
Important
operating
Information
Information
instructions are on the CD-ROM.
Do not place objects on the power cord.
Install the unit where no one can step or trip
on the cord.
1.1 For your safety
To prevent severe injury and loss of life/property,
read this section carefully before using the unit to
ensure proper and safe operation of your unit.
Do not overload power outlets and
extension cords. This can result in the risk of
fire or electric shock.
L The following symbols are used to classify and
describe the level of hazard and injury caused
when the denotation is disregarded and
improper use is performed.
Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
Regularly remove any dust, etc. from the AC
adaptor/power plug by pulling it from the
power outlet, then wiping with a dry cloth.
Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.
Denotes a potential hazard that could result in
serious injury or death.
Unplug this unit from power outlets if it emits
smoke, an abnormal smell or makes
unusual noise. These conditions can cause
fire or electric shock. Confirm that smoke
has stopped and contact an authorized
service center.
Denotes hazards that could result in minor injury or
damage to the unit.
L The following symbols are used to classify and
describe the type of instructions to be observed.
This type of symbol is used to alert users
to a specific operating procedure that
must be performed carefully.
Never touch the plug with wet hands. There
is a danger of electric shock.
Installation
This type of symbol is used to alert users
to a specific operating procedure that
must not be performed.
Place the unit securely on a stable, level
surface. Serious damage and/or injury may
result if the unit falls.
This type of symbol is used to alert users
to a specific operating procedure that
must be emphasized in order to operate
the unit safely.
To prevent the risk of fire or electrical shock,
do not expose this product to rain or any
type of moisture.
Make sure that the unit is installed in a well
ventilated room so as not to increase
density of ozone in the air. Since ozone is
heavier than air, it is recommended that air
at floor level be ventilated.
Power and ground connection
Use only the power source marked on the
unit. If you are not sure of the type of power
supplied to your home, consult your dealer
or local power company.
For safety purposes this unit is equipped
with a grounded plug. If you do not have this
type of outlet, please have one installed. Do
not defeat this safety feature by tampering
with the plug.
4
Operating safeguards
Turn the power switch OFF before cleaning.
Do not use liquid or aerosol cleaners.
Do not cover slots and openings on the unit.
They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.
Detailed operating instructions are on the CD-ROM.
MB350-PNQW1864ZA-QRG-en.book Page 5 Friday, July 10, 2009 4:26 PM
1. Important Information
Never push any objects through slots in this
unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.
Installation and relocation
After moving the unit from cold areas to
warmer areas, wait approximately 30
minutes before turning on the power switch
to allow the unit to adjust to the ambient
temperature. If the power switch is turned on
too soon after a sudden climate change,
condensation may form inside the unit,
causing malfunction.
To reduce the risk of electric shock, do not
disassemble this unit. Take the unit to an
authorized service center when service is
required. Opening or removing covers may
expose you to dangerous voltage or other
risks. Incorrect reassembly can cause
electric shock when the unit is subsequently
used.
Never turn the unit upside down or sideways
when moving it.
Follow all warnings and instructions marked
on this unit.
Never install telephone wiring during a
lightning storm.
Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may cause
a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
Unplug this unit from power outlets and refer
servicing to an authorized service center
when any of the following conditions occur:
L If the power cord is damaged or frayed.
L If liquid has been spilled into the unit.
L If the unit has been exposed to rain or
water.
L If the unit does not work normally by
following the operating instructions.
Adjust only controls covered by the
operating instructions. Improper
adjustment may require extensive work
by an authorized service center.
L If the unit has been dropped or
physically damaged.
L If the unit exhibits a distinct change in
performance.
Use caution when installing or modifying
telephone lines.
Do not position the unit in a location where it
is unstable or subject to vibrations.
Laser radiation
The printer of this unit utilizes a laser. Use of
controls or adjustments or performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
USB cable/LAN cable
To assure continued emission limit
compliance;
– use only shielded USB cable (Example:
Hi-Speed USB 2.0 certified cable).
– use only shielded LAN cable (category 5
straight cable).
Fuser unit
During or immediately after printing, the
fuser unit gets hot. This is normal. Do not
touch the fuser unit.
Note:
L The area near the recording paper exit may also get
warm. This is normal.
Detailed operating instructions are on the CD-ROM.
5
MB350-PNQW1864ZA-QRG-en.book Page 6 Friday, July 10, 2009 4:26 PM
1. Important Information
Toner cartridge
Avoid ingestion, inhalation, eye or skin
contact.
L If ingestion occurs, drink several glasses
of water to dilute stomach contents.
L If inhalation occurs, exit the area
immediately into the fresh air.
L If skin contact occurs, wash thoroughly
with soap and cold water, then air dry.
Do not use hot water or hair dryer.
L If eye contact occurs, flush thoroughly
with water.
L In all cases, seek medical treatment if
adverse symptoms occur.
When moving the unit, hold by the grips (1) on both
sides.
1
1.2 Important safety instructions
When using this unit, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, or personal injury.
1
1. Do not use this unit near water, for example near a
bathtub, wash bowl, kitchen sink, etc.
2. During thunderstorms, avoid using telephones
except cordless types. There may be a remote risk of
an electric shock from lightning.
3. Do not use the telephone of this unit (if so equipped)
to report a gas leak, when in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
1.3 Moving the unit
The unit is heavy. It is highly recommended that two
people handle this unit.
1.4 Illegal copies
L It is unlawful to make copies of certain
documents.
Copying certain documents may be illegal in your
country. Penalties of fines and/or imprisonment may
be imposed on those found guilty. The following are
examples of items that may be illegal to copy in your
country.
– Currency
– Bank notes and checks
– Bank and government bonds and securities
– Passports and identification cards
– Copyright material or trademarks without the
consent of the owner
– Postage stamps and other negotiable
instruments
This list is not inclusive and no liability is
assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
6
Detailed operating instructions are on the CD-ROM.
MB350-PNQW1864ZA-QRG-en.book Page 7 Friday, July 10, 2009 4:26 PM
1. Important Information
Notice:
L Install your machine near a supervised area to
prevent illegal copies from being made.
1.5 Display messages
To indicate the unit’s status, one or more of the following
messages will appear on the display. See the operating
instructions for details.
– “Call Service”
– “Change Drum”
– “Change Supplies Toner Empty”
– “Change Supplies Toner Low”
– “Check Document”
– “Check Drum”
– “Check Install Input Tray #1”
– “Check Paper”
– “Check Pick Up Input Tray #1”
– “Directory Full”
– “Drum Life Low”
– “Email Size Over”
– “Fax in Memory”
– “File Size Over”
– “Keep Copying”
– “Left Cover Open”
– “Low Temperature”
– “Memory Full”
– “Memory Overflow”
– “Modem Error”
– “No Fax Reply”
– “Out of Paper Input Tray #1”
– “Paper Jammed”
– “PC Fail or Busy.”
– “Please Wait”
– “Redial Time Out”
– “Remove Document”
– “Replace Drum”
– “RX Memory Full”
– “Scanner Position Error”
– “Transmit Error”
– “Tray #2 Left Cover Open”
– “Warming Up”
Detailed operating instructions are on the CD-ROM.
7
MB350-PNQW1864YA-QRG-en.book Page 8 Friday, January 22, 2010 10:56 AM
1. Important Information
1.6 FCC and Other Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
CAUTION:
Any changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate this device.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV
technician for help.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
FCC Inquiries Only:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Email: [email protected]
Note: For Technical Support, please contact your
Authorized Panasonic selling dealer.
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the rear
of this equipment is a label that contains, among other
information, a product identifier in the format US:ACJ---------.
If requested, this number must be provided to the
telephone company.
• Registration No .....(found on the rear of the unit)
• Ringer Equivalence No. (REN)
...............................(found on the rear of the unit)
The REN is used to determine the number of devices
that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not
all areas, the sum of RENs should not exceed five
(5.0).To be certain of the number of devices that may be
connected to a line, as determined by the total RENs,
contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is
part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are
the REN without a decimal point (e.g., 03 is a REN of
0.3).
If this equipment causes harm to the telephone network,
the telephone company will notify you in advance that
temporary discontinuance of service may be required.
But if advance notice isn't practical, the telephone
company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that could
affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order
for you to make necessary modifications to maintain
uninterrupted service.
If trouble is experienced with this equipment, for repair or
warranty information, please contact an authorized
Panasonic dealer. If the equipment is causing harm to
the telephone network, the telephone company may
request that you disconnect the equipment until the
problem is resolved.
Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public service
commission or corporation commission for information.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation of
this equipment does not disable your alarm equipment. If
you have questions about what will disable alarm
equipment, consult your telephone company or a
qualified installer.
WHEN PROGRAMMING EMERGENCY NUMBERS
AND(OR) MAKING TEST CALLS TO EMERGENCY
NUMBERS:
1) Remain on the line and briefly explain to the
dispatcher the reason for the call.
2) Perform such activities in the off-peak hours, such as
early morning or late evenings.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed
to be connected to a compatible modular jack that is also
compliant.
8
Detailed operating instructions are on the CD-ROM.
MB350-PNQW1864ZA-QRG-en.book Page 9 Friday, July 10, 2009 4:26 PM
Notes
9
MB350-PNQW1864ZA-QRG-en.book Page 10 Friday, July 10, 2009 4:26 PM
Notes
10
MB350-PNQW1864ZA-QRG-en.book Page 11 Friday, July 10, 2009 4:26 PM
Notes
11
MB350-PNQW1864YA-QRG-en.book Page 12 Friday, January 22, 2010 10:56 AM
USA Only
WARRANTY
PANASONIC CORPORATION OF NORTH AMERICA MAKES NO WARRANTIES, GUARANTEES OR
REPRESENTATIONS, EXPRESSED OR IMPLIED, TO CUSTOMER WITH RESPECT TO THIS
PANASONIC MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
PANASONIC CORPORATION OF NORTH AMERICA ASSUMES NO RISK AND SHALL NOT BE
SUBJECT TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS SUSTAINED BY
THE CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS PANASONIC
MACHINE.
SEE YOUR DEALER FOR DETAILS OF DEALER’S WARRANTY.
For Service, Call:
One Panasonic Way, Secaucus, New Jersey 07094
http://panasonic.net/pcc/support/mfp/
PNQW1864YA
CM0709DW1129
1/2
PNQW1864YA
Printed in CM0709DW1129
Malaysia
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement