Panasonic | KXFL611BL | Operating instructions | Panasonic KXFL611BL Operating Instructions

Panasonic KXFL611BL Operating Instructions
FL611BL-PFQX2200ZA-en.PDF Page 1 Thursday, April 7, 2005 1:15 PM
High Speed Laser Fax
with Copier Function
Operating Instructions
Model No.
Please read these operating instructions
before using the unit and save for future
reference.
This unit is compatible with Caller ID. To
use this feature, you must subscribe to
the appropriate service of your service
provider.
KX-FL611BL
Be sure to use the telephone line
cord included in this unit.
This model is designed to be used only
in Belgium.
FL611BL-PFQX2200ZA-en.book Page i Thursday, April 7, 2005 1:15 PM
Location of Controls
How to use the operating instructions
When following operating instructions, always keep the front cover page (next page) open for easy
reference to the buttons.
OPEN
i
FL611BL-PFQX2200ZA-en.book Page ii Thursday, April 7, 2005 1:15 PM
Location of controls
Please keep this page open when following operating instructions.
For a description of each button, see page 8.
A
I J K L
B
D E F
C
M N O P
Q R S
Buttons (Listed in alphabetical order)
AUTO ANSWER G
HELP M
BROADCAST B
JUNK FAX PROHIBITOR D
CALLER ID PRINT Q
LOWER S
CALLER ID SEARCH R
MANUAL BROAD C
COLLATE E
MENU O
COPY START V
MONITOR L
DIRECTORY PROGRAM N
NAME/TEL NO. S
FAX START U
NAVIGATOR P
HANDSET MUTE J
QUICK SCAN START H
T
G H
U
V
RK
REDIAL/PAUSE I
RESOLUTION F
SET U
Station keys A
STOP T
VOLUME P
ii
FL611BL-PFQX2200ZA-en.book Page 2 Thursday, April 7, 2005 1:15 PM
Thank you for purchasing a Panasonic fax machine.
Things you should keep a record of
Attach your sales receipt here.
For your future reference
Date of purchase
Serial number (found on the rear of the unit)
Dealer’s name and address
Dealer’s telephone number
You can select English or French for the language.
L The display and reports will be in the selected language. The default setting is English. If you want to
change the setting to French, see feature #48 on page 41.
Caution:
L Do not rub or use an eraser on the printed side of recording paper, as the print may smear.
L In the event of problems, you should contact your equipment supplier in the first instance.
L This equipment is designed for use on the Belgium analogue telephone network.
Declaration of Conformity:
L Panasonic Communications Co., Ltd. declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment
(R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are available
for download by visiting:
http://www.doc.panasonic.de
Contact:
Panasonic Services Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, F.R. Germany
Copyright:
L This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for
internal use only. All other reproduction, in whole or in part, is prohibited without the written consent
of Panasonic Communications Co., Ltd.
© 2005 Panasonic Communications Co., Ltd. All Rights Reserved.
2
FL611BL-PFQX2200ZA-en.book Page 3 Thursday, April 7, 2005 1:15 PM
Important Information
Important
Safety
Instructions
Information
Important safety
instructions
When using this unit, basic safety precautions
should always be followed to reduce the risk of
fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked
on this unit.
3. Unplug this unit from power outlets before
cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this unit near water, for example
near a bathtub, wash bowl, kitchen sink, etc.
5. Place the unit securely on a stable surface.
Serious damage and/or injury may result if
the unit falls.
6. Do not cover slots and openings on the unit.
They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.
7. Use only the power source marked on the
unit. If you are not sure of the type of power
supplied to your home, consult your dealer or
local power company.
8. For safety purposes this unit is equipped with
a grounded plug. If you do not have this type
of outlet, please have one installed. Do not
defeat this safety feature by tampering with
the plug.
9. Do not place objects on the power cord.
Install the unit where no one can step or trip
on the cord.
10. Do not overload power outlets and extension
cords. This can result in the risk of fire or
electric shock.
11. Never push any objects through slots in this
unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.
12. To reduce the risk of electric shock, do not
disassemble this unit. Take the unit to an
authorised service centre when service is
required. Opening or removing covers may
expose you to dangerous voltage or other
risks. Incorrect reassembly can cause
electric shock when the unit is subsequently
used.
13. Unplug this unit from power outlets and refer
servicing to an authorised service centre
when the following conditions occur:
A. When the power cord is damaged or
frayed.
B. If liquid has been spilled into the unit.
C. If the unit has been exposed to rain or
water.
D. If the unit does not work normally by
following the operating instructions.
Adjust only controls covered by the
operating instructions. Improper
adjustment may require extensive work
by an authorised service centre.
E. If the unit has been dropped or physically
damaged.
F. If the unit exhibits a distinct change in
performance.
14. During thunderstorms, avoid using
telephones except cordless types. There may
be a remote risk of an electric shock from
lightning.
15. Do not use this unit to report a gas leak, when
in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
CAUTION:
Installation
L After moving the unit from cold areas to
warmer areas, let the unit adjust to the
warmer temperature and do not connect the
unit for about 30 minutes. If the unit is
connected too soon after a sudden climate
change, condensation may form inside the
unit causing malfunction.
L Never install telephone wiring during a
lightning storm.
L Never install telephone jacks in wet locations
unless the jack is specifically designed for
wet locations.
L Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
L Use caution when installing or modifying
telephone lines.
L Do not touch the plug with wet hands.
3
FL611BL-PFQX2200ZA-en.book Page 4 Thursday, April 7, 2005 1:15 PM
Important Information
Laser radiation
L The printer of this unit utilises a laser. Use of
controls or adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
Fuser unit
L The fuser unit gets hot. Do not touch it.
L During or immediately after printing, the area
near the recording paper exit (1) also gets
warm. This is normal.
have read them, open the drum unit
protection bag. The drum unit contains a
photosensitive drum. Exposing it to light may
damage the drum. Once you have opened
the protection bag:
– Do not expose the drum unit to light for
more than 5 minutes.
– Do not touch or scratch the green drum
surface.
– Do not place the drum unit near dust or
dirt, or in a high humidity area.
– Do not expose the drum unit to direct
sunlight.
WARNING:
L To prevent the risk of fire or electrical shock,
do not expose this product to rain or any type
of moisture.
L Unplug this unit from power outlets if it emits
smoke, an abnormal smell or make unusual
noise. These conditions can cause fire or
electric shock. Confirm that smoke has
stopped and contact an authorised service
centre.
2
1
2
Fuser unit
Toner cartridge
L Be careful of the following when you handle
the toner cartridge:
– Do not leave the toner cartridge out of the
protection bag for a long time. It will
decrease the toner life.
– If you ingest any toner, drink several
glasses of water to dilute your stomach
contents, and seek immediate medical
treatment.
– If any toner comes into contact with your
eyes, flush them thoroughly with water,
and seek medical treatment.
– If any toner comes into contact with your
skin, wash the area thoroughly with soap
and water.
– If you inhale any toner, move to an area
with fresh air and consult local medical
personnel.
Drum unit
L Read the instructions on page 10 before you
begin installation of the drum unit. After you
4
For best performance
Toner cartridge and drum unit
L In the printing process, heat is used to fuse
toner onto the page. As a result, it is normal
for the machine to produce an odour during
and shortly after printing. Be sure to use this
unit in an area with proper ventilation.
L To extend the life of the drum unit, the unit
should never be turned OFF immediately
after printing. Leave the power turned ON for
a minimum of 30 minutes after printing.
L Do not cover slots or openings on the unit.
Inspect the air circulation vents regularly and
remove any dust build-up with a vacuum
cleaner (2).
L When replacing the toner cartridge or drum
unit, do not allow dust, water, or liquids to
come in contact with the drum. This may
affect print quality.
Environment
L Keep the unit away from electrical noise
generating devices, such as fluorescent
lamps and motors.
L The unit should be kept free from dust, high
temperature and vibration.
L The unit should not be exposed to direct
sunlight.
L Do not place heavy objects on top of the unit.
FL611BL-PFQX2200ZA-en.book Page 5 Thursday, April 7, 2005 1:15 PM
Important Information
L When you leave the unit unused for a long
period of time, unplug this unit from power
outlet.
L The unit should be kept away from heat
sources such as heaters, kitchen stoves, etc.
It should not be placed in rooms where the
temperature is less than 10 °C or greater
than 32.5 °C. Damp basements should also
be avoided.
Recording paper
L Store unused paper in the original packaging,
in a cool and dry place. Not doing so may
affect print quality.
Routine care
L Wipe the outer surface of the unit with a soft
cloth. Do not use benzine, thinner, or any
abrasive powder.
5
FL611BL-PFQX2200ZA-en.book Page 6 Thursday, April 7, 2005 1:15 PM
Table of Contents
1. Introduction and
Installation
1. Table of Contents
Accessories
1.1 Included accessories..........................7
1.2 Accessory information ........................8
Finding the Controls
1.3 Description of buttons......................... 8
1.4 Overview ............................................ 9
Installation
1.5 Toner cartridge and drum unit ......... 10
1.6 Paper tray and paper tray cover ....... 11
1.7 Paper stacker....................................12
1.8 Document stacker............................. 13
1.9 Handset cord ....................................13
1.10 Recording paper............................... 13
2. Preparation
Connections and Setup
2.1 Connections .....................................15
Help Button
2.2 Help function ....................................16
Volume
2.3 Adjusting volume ..............................16
Initial Programming
2.4 Date and time ...................................17
2.5 Your logo...........................................18
2.6 Your fax number ............................... 19
3. Telephone
Automatic Dialling
3.1 Storing names and telephone numbers
for the one-touch dial feature and
navigator directory............................21
3.2 Making a phone call using one-touch
dial feature or navigator directory ..... 22
Caller ID
3.3 Caller ID service ............................... 23
3.4 Viewing and calling back using caller
information........................................ 24
3.5 Storing caller information into the onetouch dial feature and navigator
directory............................................25
4. Fax
Sending Faxes
4.1 Sending a fax manually .................... 27
4.2 Documents you can send ................. 28
4.3 Sending a fax using one-touch dial
feature and navigator directory......... 29
4.4 Broadcast transmission ....................29
Receiving Faxes
4.5 Selecting the way to use your fax
6
machine............................................31
Receiving a fax manually – Auto answer
OFF .................................................. 32
4.7 Receiving a fax automatically – Auto
answer ON........................................ 33
4.8 Using the unit with an answering
machine............................................34
4.9 Receive polling (retrieving a fax placed
on another fax machine)................... 34
4.10 Junk fax prohibitor (preventing fax
reception from undesired callers) ..... 35
4.6
5. Copy
Copying
5.1 Making a copy ..................................36
6. Programmable Features
Features Summary
6.1 Programming ....................................38
6.2 Basic features...................................39
6.3 Advanced features............................40
6.4 Direct commands for programming
features.............................................42
7. Help
Error Messages
7.1 Error messages – Reports ............... 44
7.2 Error messages – Display ................ 44
Troubleshooting
7.3 When a function does not work, check
here .................................................. 47
Replacement
7.4 Replacing the toner cartridge and the
drum unit ......................................... 51
Jams
7.5 Recording paper jam ........................53
7.6 Document jams - sending................. 56
Cleaning
7.7 Cleaning the inside of the unit .......... 57
8. General Information
Printed Reports
8.1 Reference lists and reports .............. 59
Specifications
8.2 Specifications ...................................60
9. Index
9.1
Index................................................ 63
FL611BL-PFQX2200ZA-en.book Page 7 Thursday, April 7, 2005 1:15 PM
1. Introduction and Installation
1 Introduction and Installation
1.1 Included accessories
No.
Item
Quantity
1
Power cord
1
----------
2
Telephone line cord
1
----------
3
Handset
1
----------
4
Handset cord
1
----------
5
Paper stacker
1
----------
6
Paper tray
1
----------
7
Paper tray cover
1
----------
8
Drum unit
1
See page 62.
9
Toner cartridge
(starter toner cartridge)
1
prints about 800 A4-sized
pages with a 5% image area
(page 61).
j
Operating instructions
1
French
1
Dutch
k
Quick installation guide
Notes
1
----------
1
2
3
4
5
6
7
8
9
j
k
Note:
L If any items are missing or damaged, contact the place of purchase.
L Save the original carton and packing materials for future shipping and transportation of the unit.
7
FL611BL-PFQX2200ZA-en.book Page 8 Thursday, April 7, 2005 1:15 PM
1. Introduction and Installation
M {HELP}
1.2 Accessory information
To ensure that the unit operates properly, we
recommend the use of a Panasonic toner
cartridge and drum unit.
L To print helpful information for quick
reference (page 16).
N {DIRECTORY PROGRAM}
L To store or edit names and telephone
numbers (page 21).
1.2.1 Available accessories
O {MENU}
– Replacement toner cartridge (KX-FA83X)
– Replacement drum unit (KX-FA84X)
P {NAVIGATOR}{VOLUME}
See page 61 for specifications.
Finding the Controls
1.3 Description of buttons
L Keep the front cover page open for button
locations.
A Station keys
L To use the one-touch dial feature (page
21, 22, 29).
B {BROADCAST}
L To transmit a document to multiple parties
(page 29, 30).
C {MANUAL BROAD}
L To transmit a document to multiple parties
manually (page 29, 30).
D {JUNK FAX PROHIBITOR}
L To use junk fax prohibitor (page 35).
E {COLLATE}
L To make a collated copy (page 37).
F {RESOLUTION}
L To select a resolution (page 27, 36).
G {AUTO ANSWER}
L To turn the auto answer setting ON/OFF
(page 32, 33).
H {QUICK SCAN START}
L To store a scanned document into
memory, and then send it (page 27).
I {REDIAL/PAUSE}
L To redial the last number dialled. If the line
is busy when you make a phone call using
the {MONITOR} button, the unit will
automatically redial the number up to 5
times.
L To insert a pause during dialling.
J {HANDSET MUTE}
L To mute your voice to the other party
during a conversation. Press again to
resume the conversation.
K {R}
L To access special telephone services or
for transferring extension calls.
L {MONITOR}
L To initiate dialling.
8
L To initiate or exit programming.
L To adjust volume (page 16).
L To search for a stored item (page 22, 29).
L To select features or feature settings
during programming (page 38).
L To navigate to the next operation.
Q {CALLER ID PRINT}
L To print the Caller ID list (page 24).
R {CALLER ID SEARCH}
L To view caller information (page 24).
S {LOWER}{NAME/TEL NO.}
L To select stations 12–22 for the one-touch
dial feature (page 21, 22, 29).
L To change the display of the caller
information (page 24).
T {STOP}
L To stop an operation or programming
session.
U {FAX START}{SET}
L To start sending or receiving a fax.
L To store a setting during programming.
V {COPY START}
L To copy a document (page 36).
FL611BL-PFQX2200ZA-en.book Page 9 Thursday, April 7, 2005 1:15 PM
1. Introduction and Installation
1.4 Overview
1
7
2
8
3
9
4
j
5
k
6
l
1 Handset
2 Speaker
3 Document guides
4 Paper tray cover
5 Tension plate
6 Paper tray
7 Paper stacker*1
8 Document stacker*1
9 Recording paper exit
j Document exit
k Front cover
l Document entrance
*1 The paper stacker and document stacker
may not be shown in all illustrations.
9
FL611BL-PFQX2200ZA-en.book Page 10 Thursday, April 7, 2005 1:15 PM
1. Introduction and Installation
3
Installation
1.5 Toner cartridge and
drum unit
Place the toner cartridge (1) into the drum
unit (2) vertically.
1
The included toner cartridge is a starter toner
cartridge. It will print about 800 A4-sized pages
with a 5 % image area (page 61).
Caution:
L Read the following instructions before
you begin installation. After you have read
them, open the drum unit protection bag.
The drum unit contains a photosensitive
drum. Exposing it to light may damage the
drum. Once you have opened the
protection bag:
– Do not expose the drum unit to light for
more than 5 minutes.
– Do not touch or scratch the green
drum surface.
– Do not place the drum unit near dust or
dirt, or in a high humidity area.
– Do not expose the drum unit to direct
sunlight.
L Do not leave the toner cartridge out of the
protection bag for a long time. It will
decrease the toner life.
1
Before opening the protection bag of the new
toner cartridge, shake it vertically more than
5 times.
2
4
Firmly press down the toner cartridge to
snap into position.
5
Turn the two levers (1) on the toner
cartridge firmly.
1
2
Remove the toner cartridge and drum unit
from the protection bags. Peel off the seal
(1) from the toner cartridge.
6
Make sure that the triangles (1) match, to
install the toner cartridge correctly.
1
1
10
FL611BL-PFQX2200ZA-en.book Page 11 Thursday, April 7, 2005 1:15 PM
1. Introduction and Installation
7
Lift open the front cover (1), holding OPEN
(2).
9
Close the front cover (1) by pushing down
on both sides, until locked.
1
1
2
L If the lower glass (3) is dirty, clean it with
a soft and dry cloth.
Toner save feature
If you want to reduce toner consumption, set the
toner save setting to ON (feature #79 on page
42). The toner cartridge will last approximately
40 % longer. This feature may lower the print
quality.
3
8
L While the unit displays “PLEASE WAIT”,
do not open the front cover, or disconnect
the power cord.
Install the drum and toner unit (1) by holding
the tabs.
2
1.6 Paper tray and paper
tray cover
1
Insert the paper tray (1) into the slot (2) on
the back of the unit.
1
2
1
L Do not touch the transfer roller (2).
11
FL611BL-PFQX2200ZA-en.book Page 12 Thursday, April 7, 2005 1:15 PM
1. Introduction and Installation
2
Pull the tension plate forward (1) and attach
the paper tray cover (2), then push the
tension plate back (3).
1.7 Paper stacker
Line up the slots (1) in the paper stacker with
the pegs (2) on the bottom of the unit, then
insert the two tabs of the paper stacker into the
slots on the unit (3).
2
1
2
4
3
3
Note:
L Do not place the unit in an area where the
paper tray may be obstructed (i.e., by a wall,
etc.).
L Keep this surface (4) away from walls etc.
more than 50 mm to let the unit cool down.
To remove the paper tray
Pull the paper tray forward in the direction of the
arrow.
12
1
Note:
L Do not place the unit in an area where the
paper stacker may be easily bumped into.
L Document and recording paper will be
ejected from the front of the unit. Do not place
anything in front of the unit.
L The paper stacker can hold up to
approximately 100 sheets of printed paper.
Remove the printed paper before the paper
stacker becomes full.
FL611BL-PFQX2200ZA-en.book Page 13 Thursday, April 7, 2005 1:15 PM
1. Introduction and Installation
1.8 Document stacker
1.9 Handset cord
Pull the document stacker (1) forward gently
until it clicks into place, then press the centre
part of the document stacker (2) to open the
extender (3).
Connect the handset cord (1).
1
1
1.10 Recording paper
2
A4 size recording paper can be used for fax
messages.
The unit can hold:
– Up to 250 sheets of 60 g/m2 to 75 g/m2
paper.
– Up to 230 sheets of 80 g/m2 paper.
– Up to 200 sheets of 90 g/m2 paper.
Please refer to page 61 for information on
recording paper.
1
Before inserting a stack of paper, fan the
paper to prevent paper jams.
3
13
FL611BL-PFQX2200ZA-en.book Page 14 Thursday, April 7, 2005 1:15 PM
1. Introduction and Installation
2
Correct
Pull the tension plate forward (1).
Incorrect
1
5
3
Attach the paper tray cover (1).
Remove the paper tray cover (1).
1
1
6
4
Push the tension plate back (1).
Insert the paper, print-side down (1).
1
1
2
2
L The paper should not be over the tabs
(2).
L If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
14
FL611BL-PFQX2200ZA-en.book Page 15 Thursday, April 7, 2005 1:15 PM
2. Preparation
2 Preparationand Setup
Connections
2.1 Connections
L If you use the unit with a computer and your
internet provider instructs you to install a
filter, please connect it as follows.
Caution:
L When you operate this product, the power
outlet should be near the product and
easily accessible.
L Be sure to use the telephone line cord
included in this unit.
L Do not extend the telephone line cord.
1 Telephone line cord
L Connect to a single telephone line jack.
2 Power cord
L Connect to the power outlet
(220 – 240 V, 50 Hz).
Telephone
line cord
Filter
To a single
telephone
line jack
1
2
Note:
L To avoid malfunction, do not position the fax
machine near appliances such as TVs or
speakers which generate an intense
magnetic field.
L If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
L If you want to connect an answering machine
to this unit, see page 34.
15
FL611BL-PFQX2200ZA-en.book Page 16 Thursday, April 7, 2005 1:15 PM
2. Preparation
Help Button
2.2 Help function
2.3 Adjusting volume
The unit contains helpful information which can
be printed for quick reference.
Basic settings:
How to set the date, time, your logo and fax
number.
Feature list:
How to program the features.
Directory:
How to store names and numbers in the
directory and how to dial them.
Fax receiving:
Help with problems to receive faxes.
{A}{B}
{SET}
Ringer volume
4 levels (high/medium/low/off) are available.
While the unit is idle, press {A} or {B}.
L If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.
Copier:
How to use the copier function.
Reports:
List of available reports.
Caller ID:
How to use the Caller ID service.
To turn the ringer OFF
1. Press {B} repeatedly to display “RINGER
OFF= OK?”.
2. Press {SET}.
L When a call is received, the unit will not
ring and will display “INCOMING CALL”.
L To turn the ringer back ON, press {A}.
{HELP} {<}{>}
1
2
{SET}
Press {HELP}.
Press {<} or {>} repeatedly to display the
desired item.
Ringer pattern
L You can select one of three ringer patterns
(feature #17 on page 39).
Monitor volume
8 levels (high to low) are available.
While using the monitor, press {A} or {B}.
Initial Programming
3
Volume
16
Press {SET}.
L The selected item will be printed.
FL611BL-PFQX2200ZA-en.book Page 17 Thursday, April 7, 2005 1:15 PM
2. Preparation
Note:
L If you select French for the language (feature
#48 on page 41), the time is set using a 24
hour clock.
Example: 15:15 (3:15PM)
Press {1}{5} {1}{5}.
2.4 Date and time
You must set the date and time.
L The other party’s fax machine will print the
date and time on the top of each page you
send according to your unit’s date and time
setting.
L The accuracy of the clock is approximately
±60 seconds a month.
{MENU}
{SET}
{<}{>}
1
Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[( )]
2
Press {<} or {>} repeatedly to display the
following.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
If you have subscribed to a Caller ID
service
The date and time will be automatically set
according to the received caller information.
L If the time has not previously been set, Caller
ID will not adjust the clock.
SET DATE & TIME
PRESS SET
3
Press {SET}.
L The cursor (|) will appear on the display.
D:|
01/M:01/Y:05
TIME: 12:00AM
4
Enter the current day/month/year by
selecting 2 digits for each.
Example: 10 August, 2005
Press {1}{0} {0}{8} {0}{5}.
D:10/M:08/Y:05
TIME: |
12:00AM
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “AM” or
“PM”.
Example: 3:15PM (12 hour clock entry)
1. Press {0}{3} {1}{5}.
D:|
10/M:08/Y:05
TIME: 03:15AM
2. Press {*} repeatedly to display “PM”.
D:|
10/M:08/Y:05
TIME: 03:15PM
6
Press {SET}.
L The next feature will be displayed.
7
Press {MENU} to exit.
17
FL611BL-PFQX2200ZA-en.book Page 18 Thursday, April 7, 2005 1:15 PM
2. Preparation
Keypad
Characters
2.5 Your logo
{6}
M N O m n
o
6
The logo can be your name or the name of your
company.
{7}
P Q R S p
q
r
{8}
T U V t
v
8
{9}
W X Y Z w x
{0}
0
(
)
% & ¥
{MENU}
{R}
{STOP}
{SET}
{<}{>}{A}{B}
{HANDSET MUTE}
1
Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[( )]
2
Press {<} or {>} repeatedly to display the
following.
YOUR LOGO
PRESS SET
3
Press {SET}.
L The cursor (|) will appear on the display.
5
6
Press {SET}.
L The next feature will be displayed.
z
9
!
"
#
$
@ @ ^
’
→
< >
To change capital or lowercase letter.
{R}
To enter a hyphen.
{HANDSET
MUTE}
To insert a space.
{STOP}
To delete a digit.
Note:
L To enter another character that is located on
the same dial key, press {>} to move the
cursor to the next space.
To enter your logo
Example: “BILL”
1. Press {2} 2 times.
LOGO=|
B
2. Press {4} 3 times.
3. Press {5} 3 times.
LOGO=BI|
L
4. Press {>} to move the cursor to the next
space and press {5} 3 times.
Press {MENU} to exit.
Note:
L Your logo will be printed on the top of each
page sent from your unit.
To select characters with the dial keypad
Keypad
Characters
{1}
1
[
]
{
}
+
–
/
,
.
_
`
:
;
?
|
{2}
A B C a
b
c
2
{3}
D E F d
e
f
3
{4}
G H I
g
h
i
4
{5}
J
j
k
l
5
18
y
u
LOGO=B|
I
Enter your logo, up to 30 characters. See the
following character table for details.
K L
7
{#}
LOGO=|
4
s
LOGO=BIL|
L
To change capital or lower-case letters
Pressing the {#} key will change to capital or
lower-case alternately.
1. Press {2} 2 times.
LOGO=|
B
=
2. Press {4} 3 times.
LOGO=B|
I
3. Press {#}.
LOGO=B|
i
FL611BL-PFQX2200ZA-en.book Page 19 Thursday, April 7, 2005 1:15 PM
2. Preparation
4. Press {5} 3 times.
LOGO=Bi|
l
2.6 Your fax number
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character, and make the correction.
To delete a character
Press {<} or {>} to move the cursor to the
character you want to delete and press {STOP}.
L To erase all characters, press and hold
{STOP}.
To insert a character
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the character.
2. Press {HANDSET MUTE} to insert a space
and enter the character.
To select characters using {A} or {B}
Instead of pressing the dial keys, you can select
characters using {A} or {B}.
1. Press {B} repeatedly to display the desired
character. Characters will be displayed in the
following order:
1 Uppercase letters
2 Number
3 Symbol
4 Lowercase letters
L If you press {A}, the order will be
reversed.
2. Press {>} to insert the character.
3. Return to step 1 to enter the next character.
{MENU}
{R}
1
{STOP}
{<}{>}
{SET}
Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[( )]
2
Press {<} or {>} repeatedly to display the
following.
YOUR FAX NO.
PRESS SET
3
Press {SET}.
L The cursor (|) will appear on the display.
NO.=|
4
Enter your fax number, up to 20 digits.
Example:
NO.=1234567|
5
Press {SET}.
L The next feature will be displayed.
6
Press {MENU} to exit.
Note:
L Your fax number will be printed on the top of
each page sent from your unit.
L The {*} button enters a “+” and the {#}
button enters a space.
Example: +234 5678
Press {*}{2}{3}{4}{#}{5}{6}{7}{8}.
L To enter a hyphen in a telephone number,
press {R}.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
To delete a number
Press {<} or {>} to move the cursor to the
number you want to delete and press {STOP}.
19
FL611BL-PFQX2200ZA-en.book Page 20 Thursday, April 7, 2005 1:15 PM
2. Preparation
L To erase all numbers, press and hold
{STOP}.
20
FL611BL-PFQX2200ZA-en.book Page 21 Thursday, April 7, 2005 1:15 PM
3. Telephone
L To program other items, repeat steps 2 to
6.
3 Telephone
Automatic
Dialling
3.1 Storing names and
telephone numbers for the
one-touch dial feature and
navigator directory
For rapid access to frequently dialled numbers,
the unit provides the one-touch dial feature (22
items) and navigator directory (100 items).
L Station 1 to 3 can be used alternatively as
broadcast keys (page 29).
L You can also send faxes using one-touch dial
feature and navigator directory (page 29).
7
Press {DIRECTORY PROGRAM}.
Helpful hints:
L You can confirm the stored items by printing
the telephone number list (page 59).
Note:
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
Station keys
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
L To erase all characters/numbers, press and
hold {STOP}.
3.1.2 Storing navigator directory
items
{LOWER}
{SET}
1
2
3
Press {DIRECTORY PROGRAM}.
4
5
6
Press {SET}.
2. Press {SET}.
7
Press {DIRECTORY PROGRAM}.
For stations 4–11:
Helpful hints:
L You can confirm the stored items by printing
the telephone number list (page 59).
{<}{>}{A}{B} {STOP}
{DIRECTORY PROGRAM}
3.1.1 Storing one-touch dial item
1
2
Press {DIRECTORY PROGRAM}.
Select the desired station key.
For stations 1–3:
1. Press one of the station keys.
Example:
STATION 1
DIAL MODE
[±]
Press one of the station keys.
For stations 12–22:
Press {LOWER}, then press one of the
station keys.
3
Enter the name, up to 10 characters (see
page 18 for instructions).
4
5
6
Press {SET}.
Enter the telephone number, up to 30 digits.
Press {SET}.
Press {>}.
Enter the name, up to 10 characters (see
page 18 for instructions).
Enter the telephone number, up to 30 digits.
Press {SET}.
L The display shows the number of items
stored in the navigator directory briefly.
L To program other items, repeat steps 3 to
6.
Note:
L If “SPACE= 5 DIRS.” is displayed, you can
store only 5 more items.
L A hyphen or a space entered in a telephone
number counts as 2 digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
21
FL611BL-PFQX2200ZA-en.book Page 22 Thursday, April 7, 2005 1:15 PM
3. Telephone
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
L To erase all characters/numbers, press and
hold {STOP}.
3.1.3 Editing a stored item
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired item.
3
4
5
6
7
8
3.2 Making a phone call
using one-touch dial
feature or navigator
directory
Before using this feature, store the desired
names and telephone numbers in one-touch dial
feature and navigator directory (page 21).
L Keep the front cover page open for button
locations.
Press {DIRECTORY PROGRAM}.
3.2.1 Using one-touch dial
feature
Press {*}.
L If you do not need to edit the name, skip
to step 6.
1
2
Press {MONITOR} or lift the handset.
Select the desired station key.
Edit the name. For further details, see the
storing procedure on page 21.
For stations 1–11:
Press {SET}.
L If you do not need to edit the telephone
number, skip to step 8.
For stations 12–22:
Edit the telephone number. For further
details, see the storing procedure on page
21.
Press {SET}.
L To edit other navigator directory items,
repeat steps 2 to 8.
Press the desired station key.
Press {LOWER}, then press the desired
station key.
L The unit will start dialling automatically.
3.2.2 Using the navigator
directory
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
3.1.4 Erasing a stored item
2
Press {A} or {B} repeatedly to display the
desired item.
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
3
Press {MONITOR} or lift the handset.
L The unit will start dialling automatically.
2
Press {A} or {B} repeatedly to display the
desired item.
3
4
Press {DIRECTORY PROGRAM}.
5
Press {SET}.
L To erase other items, repeat steps 2 to 5.
6
Press {STOP}.
To search for a name by initial
Example: “LISA”
1. Press {>}.
L Confirm that there are no documents in
the document entrance.
2. Press {A} or {B} to initiate the navigator
directory.
3. Press {5} repeatedly to display any name
with the initial “L” (see the character table,
page 18).
L To search for symbols (not letters or
numbers), press {*}.
4. Press {A} or {B} repeatedly to display
“LISA”.
L To stop the search, press {STOP}.
9
22
Press {STOP}.
Press {#}.
L To cancel erasing, press {STOP}.
FL611BL-PFQX2200ZA-en.book Page 23 Thursday, April 7, 2005 1:15 PM
3. Telephone
L To dial the displayed party, press
{MONITOR} or lift the handset.
Caller ID
3.3 Caller ID service
This unit is compatible with the Caller ID
service offered by your local telephone
company. To use this unit’s Caller ID
features, you must subscribe to Caller ID
service.
Important:
L This unit is designed in accordance with
the “FSK based subscriber line protocol”
under the ETS (European
Telecommunication Standard) and only
supports the basic CLIP (Calling Line
Identification Presentation) features.
L This unit will only display the caller’s
telephone number and name.
L This unit will not support future additional
telephone services.
L This unit cannot support services based
on the “DTMF based subscriber line
protocol”.
L Depending on the service of the local
telephone company, the date/time of the
call or the caller’s name may not be
displayed.
Make sure the following ring setting is set to
2 or more rings beforehand.
– FAX ring setting (feature #06 on page 39)
– TEL/FAX ring setting (feature #78 on page
42)
3.3.1 How Caller ID is displayed
The calling party’s telephone number or name
will be displayed after the 1st ring. You then have
the option of whether or not to answer the call.
The unit will automatically store caller
information (telephone number, name and the
time of the call) of the 30 most recent calls. Caller
information is stored by the most recent to the
oldest call. When the 31st call is received, the
oldest call is deleted.
Caller information can be viewed on the display
one item at a time (page 24) or confirmed by
printing the Caller ID list (page 24).
L When caller information is received and it
matches a telephone number stored in the
unit’s one-touch dial or navigator directory,
the stored name will be displayed.
L If the unit is connected to a PBX (Private
Branch Exchange) system, caller information
may not be received properly. Consult your
PBX supplier.
L If the unit cannot receive caller information,
the following will be displayed:
23
FL611BL-PFQX2200ZA-en.book Page 24 Thursday, April 7, 2005 1:15 PM
3. Telephone
“OUT OF AREA”: The caller dialled from an
area which does not provide Caller ID
service.
“PRIVATE CALLER”: The caller requested
not to send caller information.
“LONG DISTANCE”: The caller made a long
distance call.
To confirm caller information by printing
the Caller ID list
– To print manually, see page 24.
– To print automatically after every 30 new
calls, activate feature #26 (page 40).
3.4 Viewing and calling
back using caller
information
You can easily view caller information and call
back.
Important:
L Calling back will not be possible in the
following cases:
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
{MONITOR}
L To send a fax, insert the document FACE
DOWN and press {FAX START}.
To change the way caller information is
displayed
Press {NAME/TEL NO.} repeatedly after step 2.
Example:
SAM LEE
11:20AM 20 Jul ,
b
1345678901
11:20AM 20 Jul ,
L Check mark (,) on the display means the call
has already been viewed or answered.
Display while viewing
L When the unit could not receive a name, the
display will show “NO NAME RCVD”.
L When no calls have been received, the
display will show “NO CALLER DATA”.
To stop viewing
Press {STOP} after step 2.
3.4.1 Printing the Caller ID list
1
Press {CALLER ID PRINT} to start printing.
L The display will show “ERASE ALL OK?”
after printing.
2
Press {STOP} to exit the program.
L To erase all of the stored caller
information, press {SET} instead of
{STOP}.
{NAME/TEL NO.}
3.4.2 Editing a caller’s telephone
number before calling back
1
2
{MENU}
{<}{>} {A}{B}
{STOP}
{FAX START}
{SET}
{CALLER ID PRINT}
{CALLER ID SEARCH}
1
2
3
24
Press {CALLER ID SEARCH}.
Press {A} to search from the most recently
received caller information.
L If you press {B}, the display order will be
reversed.
Press {MONITOR} or lift the handset to
return the call.
L The unit will start dialling automatically.
Press {CALLER ID SEARCH}.
Press {A} or {B} repeatedly to display the
desired entry.
3
Press {NAME/TEL NO.} to display the
telephone number.
4
Press dial key (0 to 9) or {*} to enter the
editing mode and edit the telephone number.
5
Press {MONITOR} or lift the handset to call
back the edited number.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX START}.
Note:
L The edited telephone number will not be
saved in the caller information. To save in the
directory, see page 25.
FL611BL-PFQX2200ZA-en.book Page 25 Thursday, April 7, 2005 1:15 PM
3. Telephone
To correct a mistake
1. Press {<} or {>} to move the cursor to the
incorrect number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the
number you want to delete and press {STOP}.
3.5 Storing caller
information into the onetouch dial feature and
navigator directory
L Keep the front cover page open for button
locations.
To insert a number
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the number.
2. Enter the number.
Important:
L This feature is not available in the
following cases.
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
3.4.3 Erasing all caller
information
1
2
1
Press {MENU} repeatedly to display
“CALLER SETUP”.
2
Press {SET}.
L “CALL LIST ERASE” will be displayed.
3
4
5
3
4
Press {CALLER ID SEARCH}.
Press {A} or {B} repeatedly to display the
desired item.
Press {DIRECTORY PROGRAM}.
Select the station key or navigator directory.
For stations 1–3:
Press {SET}.
L To cancel erasing, press {STOP}, then
{MENU}.
1. Press the desired station key.
Press {SET}.
For stations 4–11:
Press {STOP} to exit the program.
1. Press the desired station key.
2. Press {SET}.
3. Press {SET}.
2. Press {SET}.
3.4.4 Erasing specific caller
information
For stations 12–22:
1
2
Press {CALLER ID SEARCH}.
1. Press {LOWER}, then press the desired
station key.
Press {A} or {B} repeatedly to display the
desired item.
2. Press {SET}.
3
Press {<}.
L To cancel erasing, press {STOP} 2 times.
1. Press {<} or {>}.
4
Press {SET}.
L To erase other items, repeat steps 2 to 4.
5
Press {STOP} to exit the program.
For navigator directory:
2. Press {SET}.
5
Press {SET}.
Note:
L You can confirm the stored items by printing
the telephone number list (page 59).
L The unit can only store a name of up to 10
characters long.
L To edit a name or number, see page 22.
L If caller information does not include the
caller’s name, enter the name manually. See
the instructions on page 21.
25
FL611BL-PFQX2200ZA-en.book Page 26 Thursday, April 7, 2005 1:15 PM
3. Telephone
L If you assign an item to a station key which
already contains an item, the previous item
will be replaced.
L If you use stations 1–3 as broadcast keys,
you cannot store caller information for
stations 1–3 (page 29).
26
FL611BL-PFQX2200ZA-en.book Page 27 Thursday, April 7, 2005 1:15 PM
4. Fax
4 Fax
Sending
Faxes
4.1 Sending a fax manually
1
– “STANDARD”: For printed or typewritten
documents with normal-sized characters.
– “FINE”: For documents with small print.
– “SUPER FINE”: For documents with very
small print. This setting is effective only when
the other party has a compatible fax
machines.
– “PHOTO”: For documents containing
photographs, shaded drawings, etc.
– “PHOTO WITH TEXT”: For documents
containing photographs and text.
L Using the “FINE”, “SUPER FINE”, “PHOTO”
and “PHOTO WITH TEXT” settings will
increase transmission time.
L If the resolution setting is changed during
feeding, it will be effective from the next page.
{MONITOR}
{STOP}
{FAX START}
{SET}
{REDIAL/PAUSE}
To redial the last number
1. Press {REDIAL/PAUSE}.
2. Press {FAX START}.
L If the line is busy, the unit will automatically
redial the number up to 5 times.
L To cancel redialling, press {STOP}, then
press {SET}.
{RESOLUTION}
{QUICK SCAN START}
1
Adjust the width of the document guides (1)
to fit the actual size of the document.
2
Insert the document (up to 20 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3
If necessary, press {RESOLUTION}
repeatedly to select the desired resolution.
4
5
6
Press {MONITOR}.
Dial the fax number.
When a fax tone is heard:
Press {FAX START}.
When the other party answers your call:
Lift the handset and ask them to press their
start button. When the fax tone is heard,
press {FAX START}.
Note:
L After pressing {FAX START}, you can
replace the handset.
To select the resolution
Select the desired resolution according to the
type of document.
To send more than 20 pages at a time
Insert the first 20 pages of the document. Add
the other pages (up to 20 at a time) on top of the
previously inserted pages before the last page
feeds into the unit.
To predial a fax number
You can dial the fax number first before inserting
the document. This is convenient if you need to
refer to the document for the other party’s fax
number.
1. Enter the fax number.
2. Insert the document.
3. Press {FAX START}.
Sending from memory (Quick scan feature)
You can scan the document into memory before
sending.
1. Insert the document.
2. Enter the fax number.
3. Press {QUICK SCAN START}.
Transmitting reservation (Dual Access)
feature
You can send the document even when the unit
is just receiving a fax or sending a fax from
memory (up to 3 reservations).
27
FL611BL-PFQX2200ZA-en.book Page 28 Thursday, April 7, 2005 1:15 PM
4. Fax
1. Insert the document during fax reception or
fax memory transmission.
Maximum document size
600 mm
2. Enter the fax number using the dial keypad,
one-touch dial or navigator directory.
3. Press {QUICK SCAN START} or {FAX
START}.
L The document will be fed into the unit and
scanned into memory. The unit will then send
the data. If the document exceeds the
memory capacity, transmission will be
cancelled. You must send the entire
document manually.
216 mm
Effective scanning area
L Shaded area will be scanned.
To stop transmission
Press {STOP}.
4 mm
Printing a sending report
A sending report provides you with a printed
record of transmission results. To print sending
reports, make sure feature #04 is activated
(page 39). For an explanation of error messages,
see page 44.
4 mm
4 mm
4 mm
208 mm
Printing a journal report
A journal report provides you with a printed
record of the 30 most recent faxes. To print
manually, see page 59. To print automatically
after every 30 new fax transmissions and
receptions, make sure feature #22 is activated
(page 40). For an explanation of error messages,
see page 44.
4.2 Documents you can
send
128 mm
Minimum document size
128 mm
28
216 mm
Document weight
L Single sheet:
45 g/m2 to 90 g/m2
L Multiple sheets:
60 g/m2 to 80 g/m2
Note:
L Remove clips, staples or other fasteners.
L Do not send the following types of
documents: (Make a copy of the document
and send the copy.)
– Chemically treated paper such as carbon
or carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with a faint image
– Paper with printing on the opposite side
that can be seen through the other side,
such as newsprint
L Check that ink, paste or correction fluid has
dried completely.
L To send a document with a width of less than
210 mm, we recommend using a copy
machine to copy the original document onto
A4-sized paper, then sending the copied
document.
FL611BL-PFQX2200ZA-en.book Page 29 Thursday, April 7, 2005 1:15 PM
4. Fax
4.3 Sending a fax using
one-touch dial feature and
navigator directory
Before using this feature, store the desired
names and telephone numbers into one-touch
dial feature and navigator directory (page 21).
L Keep the front cover page open for button
locations.
1
Adjust the width of the document guides to fit
the actual size of the document.
2
Insert the document (up to 20 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3
4
4.4 Broadcast
transmission
By storing one-touch dial and navigator directory
items (page 21) into the broadcast memory, you
can send the same document to multiple parties
(up to 20). Your programmed items will remain in
the broadcast memory, allowing frequent re-use.
L The broadcast function utilises stations 1–3.
The one-touch dial function will be disabled.
L Keep the front cover page open for button
locations.
4.4.1 Programming items into
the broadcast memory
1
2
Press {DIRECTORY PROGRAM}.
Select the desired broadcast key.
If necessary, press {RESOLUTION}
repeatedly to select the desired resolution
(page 27).
For BROADCAST 1-2:
Enter the fax number.
2. Press {A} or {B} repeatedly to select
“BROADCAST”.
1. Press the desired {BROADCAST} key.
Using stations 1–11:
For MANUAL BROADCAST:
Press the desired station key.
1. Press {MANUAL BROAD}.
Using stations 12–22:
Press {LOWER}, then press the desired
station key.
Using navigator directory:
Press {<} or {>}, then press {A} or {B}
repeatedly to display the desired item and
press {FAX START}.
2. Press {A} or {B} repeatedly to select
“MANUAL BROAD”.
3
4
Program items.
Using stations 1–11:
Press the desired station key.
Using stations 12–22:
Fax auto redial
If the line is busy or if there is no answer, the unit
will automatically redial the number up to 5
times.
L To cancel redialling, press {STOP}, then
press {SET}.
If your unit does not send a fax
L Confirm that you have entered the number
correctly, and that the number is a fax
number.
L Confirm that the other party’s fax machine is
answering by turning ON the connecting tone
feature (feature #76, page 41).
Press {SET}.
Press {LOWER}, then press the desired
station key.
Using navigator directory:
Press {A} or {B} repeatedly to display the
desired item, and press {SET}.
Using the dial keypad (only for MANUAL
BROAD):
Enter the fax number and press {SET}.
L To program other items, repeat this step
(up to 20 items).
5
Press {SET} after programming all of the
desired items.
L To program another broadcast key,
repeat steps 2 to 5.
6
Press {STOP} to exit.
29
FL611BL-PFQX2200ZA-en.book Page 30 Thursday, April 7, 2005 1:15 PM
4. Fax
Note:
L If you program the wrong item, press {STOP}
after step 4 to erase the item.
L Confirm the stored items by printing a
broadcast programming list (page 59).
4.4.2 Adding a new item into the
broadcast memory
After initial programming, you can add new items
(up to a combined total of 20).
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired broadcast memory
(“<BROADCAST1>”, “<BROADCAST2>” or
“<MANUAL BROAD>”).
3
4
5
Press {DIRECTORY PROGRAM}.
6
Press {SET}.
L To add other items, repeat steps 5 and 6
(up to 20 items).
7
Press {DIRECTORY PROGRAM} to exit.
Press {*}.
Press {A} or {B} repeatedly to display the
desired item you want to add.
Note:
L When adding new items to the MANUAL
BROADCAST memory, you can only select
stored items.
4.4.3 Erasing a stored item from
the broadcast memory
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired broadcast memory
(“<BROADCAST1>”, “<BROADCAST2>” or
“<MANUAL BROAD>”).
3
4
5
Press {DIRECTORY PROGRAM}.
6
7
Press {SET}.
30
Press {#}.
Press {A} or {B} repeatedly to display the
desired item you want to erase.
L To cancel erasing, press {STOP}.
Press {SET}.
L To erase other items, repeat steps 5 to 7.
8
Press {DIRECTORY PROGRAM} to exit.
4.4.4 Sending the same
document to pre-programmed
parties
1
2
Insert the document FACE DOWN.
3
Press the desired {BROADCAST} (1-2) or
{MANUAL BROAD}.
L The document will be fed into the unit and
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
L After transmission, the stored document
will be erased from memory
automatically, and the unit will
automatically print a report (broadcast
sending report).
If necessary, press {RESOLUTION}
repeatedly to select the desired resolution
(page 27).
Note:
L If you select “FINE”, “SUPER FINE”,
“PHOTO” or “PHOTO WITH TEXT”
resolution, the number of pages that the unit
can send will decrease.
L If the document exceeds the memory
capacity, sending will be cancelled.
L If a party is busy or does not answer, it will be
skipped and redialled later up to 5 times.
To cancel broadcast transmission
1. Press {STOP} while “BROADCASTING” is
displayed.
L The display will show “SEND
CANCELED?”.
2. Press {SET}.
FL611BL-PFQX2200ZA-en.book Page 31 Thursday, April 7, 2005 1:15 PM
4. Fax
Receiving Faxes
4.5 Selecting the way to
use your fax machine
Depending on your situation, select the way you
prefer to use your fax machine.
– Use only as a fax
– Use as a telephone and/or fax
– Mostly phone calls
– With answering machine
4.5.1 Use only as a fax
Your situation
You have a separate telephone line just for faxes.
How to set up
Set the fax machine to FAX ONLY mode (page
33) by pressing {AUTO ANSWER} repeatedly.
Note:
L Make sure feature #77 is set to “FAX ONLY”
beforehand (page 42).
How to receive calls
All incoming calls will be answered as faxes.
4.5.2 Use as a telephone and/or
fax
Your situation
You want to answer phone calls yourself and
receive faxes automatically without rings.
How to setup
Set the fax machine to TEL/FAX mode (page 33)
by pressing {AUTO ANSWER} repeatedly.
Note:
L Make sure feature #77 is set to “TEL/FAX”
beforehand (page 42).
How phone calls and faxes are received
If the call is a phone call, the fax machine will
ring.
If a fax calling tone is detected, the fax machine
will receive the fax automatically without ringing.
4.5.3 Mostly phone calls
Your situation
You plan to answer the calls yourself.
How to set up
Set the fax machine to TEL mode (page 32) by
pressing {AUTO ANSWER} repeatedly.
How to receive calls
You have to answer all calls manually.
To receive a fax document, press {FAX START}
for each fax receiving.
4.5.4 With answering machine
Your situation
You want to use the fax machine with an
answering machine.
How to set up
Connect an external telephone answering
machine and set the ring count of the answering
machine to less than 4.
L Set the ring count in FAX ONLY mode of the
fax machine to more than 4, if you use with
auto answer on.
How to receive calls
When receiving phone calls, the answering
machine will record voice messages.
31
FL611BL-PFQX2200ZA-en.book Page 32 Thursday, April 7, 2005 1:15 PM
4. Fax
4.6 Receiving a fax
manually – Auto answer
OFF
4.6.1 Activating TEL mode
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} repeatedly to display the
following.
TEL MODE
L The {AUTO ANSWER} light is OFF.
{STOP}
{FAX START}
How to receive phone calls and faxes
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX START}.
CONNECTING.....
3. Replace the handset.
L The unit will start fax reception.
L If you do not answer the call within 10
rings, the unit will temporarily switch to fax
reception. The other party can then send
a fax.
32
To stop receiving
Press {STOP}.
How to receive faxes with an extension
telephone
If you have another telephone connected to the
same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*} {#} {9} (default fax activation
code) firmly.
L The fax machine will start reception.
3. Replace the handset.
Note:
L To receive fax documents using the
extension telephone, make sure remote fax
activation is turned ON (feature #41 on page
40) beforehand. The default setting is ON.
FL611BL-PFQX2200ZA-en.book Page 33 Thursday, April 7, 2005 1:15 PM
4. Fax
L The {AUTO ANSWER} light is ON.
4.7 Receiving a fax
automatically – Auto
answer ON
3
The ringer volume setting should be ON
(page 16).
4.7.1 Activating FAX ONLY mode
1
Make sure feature #77 is set to “FAX ONLY”
beforehand (page 42).
2
Press {AUTO ANSWER} repeatedly to
display the following.
FAX ONLY MODE
L The {AUTO ANSWER} light is ON.
{STOP}
How faxes are received
When receiving calls, the unit will automatically
answer all calls and only receive fax documents.
Note:
L The number of rings before a call is answered
in FAX ONLY mode can be changed (feature
#06 on page 39).
4.7.2 Activating TEL/FAX mode
1
Make sure feature #77 is set to “TEL/FAX”
beforehand (page 42).
2
Press {AUTO ANSWER} repeatedly to
display the following.
TEL/FAX MODE
How phone calls and faxes are received
1. “INCOMING CALL” will be displayed but the
unit will not ring.
2. The unit will wait for the duration of 2 rings
before answering the call.
L The number of rings is determined by the
“TEL/FAX delayed ring setting” (feature
#78 on page 42).
L During this time, an extension telephone
(if connected) will ring.
3. The unit will answer the call and try to detect
a fax calling tone.
When a fax calling tone is detected
The unit receives the fax automatically
without ringing.
When a fax calling tone is not detected
A The unit will ring 3 times. You may answer
the call.
L The number of rings is determined by the
“Silent fax recognition ring setting”
(feature #30 on page 40).
L Callers will hear a ring back tone different
from the one generated by the telephone
company.
L An extension telephone (if connected) will
not ring at this time. To answer the call
with the extension telephone, lift the
handset and press {*}{0} (default auto
33
FL611BL-PFQX2200ZA-en.book Page 34 Thursday, April 7, 2005 1:15 PM
4. Fax
disconnection code) while the fax
machine is ringing.
B If you do not answer the call, the unit will
activate the fax function.
L Some fax machines do not generate fax
calling tones when sending faxes,
therefore the unit will try to receive a fax
even if no fax calling tone is detected.
Note:
L The auto disconnection code can be
changed in feature #49 on page 41.
L Even when you answer a call with the
extension telephone and press the auto
disconnection code, the fax machine may
activate the fax function depending on the
type of an extension telephone. Press
{STOP} on the fax machine to talk with the
calling party.
4.8 Using the unit with an
answering machine
4.8.1 Setting up the fax machine
and an answering machine
1
Connect the answering machine.
L We recommend you record a message
up to 10 seconds long, and not to pause
for more than 4 seconds during the
message. Otherwise, both machines will
not function correctly.
4
5
Activate the answering machine.
6
Check all or part of the followings are not the
same:
– the remote access code of the answering
machine
– the fax activation code (feature #41 on
page 40)
Set the fax machine to the desired receiving
mode (page 32, 33).
L If you set to FAX ONLY mode, change
the ring setting in FAX ONLY mode to
more than 4 (feature #06 on page 39).
Receiving a voice message and fax
document in one call
The caller can leave a voice message and send
a fax document during the same call. Inform the
caller of the following procedure beforehand.
1. The caller calls your unit.
L The answering device will answer the call.
2. The caller can leave a message after the
greeting message.
3. The caller presses *#9 (pre-selected fax
activation code).
L The unit will activate the fax function.
4. The caller presses the start button to send a
document.
Note:
L The fax activation code can be changed in
feature #41 (page 40).
4.9 Receive polling
(retrieving a fax placed on
another fax machine)
To a
single
telephone
line jack
Answering machine
(Not included)
2
3
34
Set the number of rings on the answering
machine to less than 4.
L This will allow the answering machine to
answer the call first.
Record a greeting message on the
answering machine.
This feature allows you to retrieve a document
from another compatible machine. Therefore you
pay for the call.
Make sure that no documents are fed into your
unit and that the other party’s machine is ready
for your call.
L Keep the front cover page open for button
locations.
1
Press {MENU} repeatedly to display
“POLLING”.
2
Press {SET}.
FL611BL-PFQX2200ZA-en.book Page 35 Thursday, April 7, 2005 1:15 PM
4. Fax
3
4
Dial the fax number.
4.10.2 Storing undesired callers
Press {SET}.
L The unit will start reception.
You can register up to 10 undesired numbers
from the Caller ID list (page 24) if you do not wish
to receive faxes from them.
4.10 Junk fax prohibitor
(preventing fax reception
from undesired callers)
If you subscribe to Caller ID service, this feature
prevents fax reception from calls that do not
show caller information.
Additionally, you can store undesirable phone
numbers in the junk fax prohibitor list; faxes sent
from these phone numbers will not be received
by your fax machine.
L Keep the front cover page open for button
locations.
Important:
L This feature does not work when manual
reception is performed.
4.10.1 Activating the junk fax
prohibitor
LIGHT
JUNK FAX
PROHIBITOR
1
2
Press {CALLER ID SEARCH}.
Press {A} or {B} repeatedly to display the
party you wish to prevent fax reception from.
3
4
Press {JUNK FAX PROHIBITOR}.
5
Press {STOP} to exit the program.
Press {SET}.
L To program other parties, repeat steps 2
to 4.
Note:
L If there is no space to store new items, “LIST
FULL” is displayed in step 4. Erase
unnecessary items.
To display the junk fax prohibitor list
1. Press {JUNK FAX PROHIBITOR}.
2. Press {>} repeatedly to display “JUNK
LIST DISP.”.
3. Press {SET}.
4. Press {A} or {B} to display the items on the
list.
5. Press {STOP} to stop viewing.
6. Press {STOP} to exit the list.
To print the junk fax prohibitor list
1. Press {JUNK FAX PROHIBITOR}.
2. Press {>} repeatedly to display “JUNK
LIST PRINT”.
3. Press {SET}.
4. Press {STOP} to exit the list.
{SET}
{STOP}
{CALLER ID SEARCH}
{<}{>}{A}{B}
1
2
3
4
5
Press {JUNK FAX PROHIBITOR}.
Press {>}.
Press {A} or {B} repeatedly to select “ON”.
Press {SET}.
Press {STOP} to exit the program.
Note:
L While the junk fax prohibitor is activated, the
JUNK FAX PROHIBITOR indicator is ON.
To erase an item from the junk fax
prohibitor list
1. Press {JUNK FAX PROHIBITOR}.
2. Press {>} repeatedly to display “JUNK
LIST DISP.”.
3. Press {SET}.
4. Press {A} or {B} repeatedly to display the
desired item.
5. Press {<}.
L To cancel erasing, press {STOP}.
6. Press {SET}.
L The item is erased.
L To erase other items, repeat steps 4 to 6.
7. Press {STOP} 2 times.
35
FL611BL-PFQX2200ZA-en.book Page 36 Thursday, April 7, 2005 1:15 PM
5. Copy
5 Copy
Copying
5.1 Making a copy
1
– “PHOTO”: For documents containing
photographs, shaded drawings, etc.
– “PHOTO WITH TEXT”: For documents
containing photographs and text.
L If you select “STANDARD”, copying will be
done using “FINE” mode.
To stop copying
Press {STOP}.
5.1.1 More copying features
{A}{B} {COLLATE}
{STOP}
{COPY START}
{RESOLUTION}
1
2
Adjust the width of the document guides (1)
to fit the actual size of the document.
Insert the document (up to 20 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3
If necessary, press {RESOLUTION}
repeatedly to select the desired resolution.
4
Press {COPY START}.
L If necessary, enter the number of copies
(up to 99).
5
Press {COPY START}, or wait for 20
seconds.
L The unit will start copying.
Note:
L Any document which can be sent as a fax can
also be copied (page 28).
To select the resolution
Select the desired resolution according to the
type of document.
– “FINE”: For printed or typewritten
documents with small print.
– “SUPER FINE”: For documents with very
small print.
36
To enlarge a document
1. Insert the document, then press {COPY
START}.
2. Press {A} repeatedly to select from “105%”
to “200%” by changing the enlargement rate
5% at a time.
3. Press {COPY START}.
L The unit will only enlarge the centre of the
upper part of the document. To make an
enlarged copy of the bottom of the
document, turn the document around,
and then make a copy.
Example: 150% enlarged copy
Original document
A B
Enlarged copy
A B
C D
C D
To reduce a document
1. Insert the document, then press {COPY
START}.
2. Press {B} repeatedly to select from “50%” to
“95%” by changing the reduction rate 5% at a
time.
3. Press {COPY START}.
Example: 70% reduced copy
Original document
A B
Reduced copy
A B
C D
C D
FL611BL-PFQX2200ZA-en.book Page 37 Thursday, April 7, 2005 1:15 PM
5. Copy
To collate multiple copies
The unit can collate multiple copies in the same
order as the original document pages.
1. Insert the document, then press {COLLATE}
repeatedly to display “COLLATE=ON”.
2. Enter the number of copies (up to 99).
3. Press {COPY START}.
Example: Making 2 copies of a 4-page
original document
4
3
4
2
4
1
3
3
2
4
2
3
1
2
1
Collated pages
1
Uncollated pages
Note:
L The unit will store the documents into
memory while collating the copies. If memory
becomes full while storing, the unit will only
print out the stored pages.
L After copying, the collating feature will turn
OFF automatically.
37
FL611BL-PFQX2200ZA-en.book Page 38 Thursday, April 7, 2005 1:15 PM
6. Programmable Features
L The setting you selected is set, and the
next feature will be displayed.
6 Programmable
Features
Summary
Features
6.1 Programming
7
To exit programming, press {MENU}.
Note:
L To exit programming, press {MENU} at any
time.
{MENU}
{SET}
{<}{>}{A}{B}
6.1.1 Programming basic
features
1
2
Press {MENU}.
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
3
Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
4
Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press {MENU}.
6.1.2 Programming advanced
features
1
2
3
4
Press {MENU}.
Press {<} or {>} repeatedly to display
“ADVANCE SETTINGS”.
Press {SET}.
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
5
Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
6
Press {SET}.
38
To program by entering the program code
number directly
You can select a feature by directly entering the
program code (# and a 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code (page 39 to
page 42).
3. Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
4. Press {SET}.
5. To exit programming, press {MENU}.
FL611BL-PFQX2200ZA-en.book Page 39 Thursday, April 7, 2005 1:15 PM
6. Programmable Features
4. Press {SET}.
6.2 Basic features
5. Enter your ID from 1 to 5 digits, using 0–9,
{*} and {#}.
L The default ID is “11”.
Code #01: Setting the date and time
6. Press {SET}.
SET DATE & TIME
PRESS SET
See page 17 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
7. Press {MENU}.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A
[±]
You can select “A” (default), “B” or “C”.
See page 18 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 19 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR
[±]
To print a sending report for fax transmission
results (page 28).
“ERROR” (default): A sending report will be
printed only when fax transmission fails.
“ON”: A sending report will be printed after every
transmission.
“OFF”: Sending reports will not be printed.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2
[±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “1”, “2” (default), “3”, “4”, “5”,
“6”, “7”, “8” or “9”. If you are using the unit with
an answering machine, set to more than 4 (page
34).
Code #12: Enabling remote operation for an
answering machine
REMOTE TAM ACT.
=OFF
[±]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID. You can access the
answering machine remotely by pressing this ID
to retrieve recorded voice messages.
1. Press {MENU}.
2. Press {#} then {1}{2}.
3. Press {A} or {B} repeatedly to select “ON”.
39
FL611BL-PFQX2200ZA-en.book Page 40 Thursday, April 7, 2005 1:15 PM
6. Programmable Features
8. Press {SET}.
6.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON
[±]
“ON” (default): The unit will print a journal report
automatically after every 30 new fax
transmissions and receptions (page 28).
“OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax transmissions
and receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR
[±]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
“NEXT FAX”: This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
“ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document.
“OFF”: Deactivates this feature.
Note:
L This feature is not available for broadcast
transmission.
L Calling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[±]
This feature allows you to take advantage of lowcost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. If necessary, press {RESOLUTION}
repeatedly to select the desired resolution
(page 27).
3. Press {MENU}.
4. Press {#} then {2}{5}.
9. Enter the transmission start time.
L Press {*} repeatedly to select “AM” or
“PM”.
L If you select French for the language
(feature #48 on page 41), the time is set
using a 24 hour clock.
10. Press {SET}.
L To cancel after programming, press {STOP}
then {SET}.
Code #26: Setting the Caller ID list to be
printed automatically
AUTO CALL. LIST
=ON
[±]
“ON” (default): The unit will print the Caller ID list
automatically after every 30 new calls (page 24).
“OFF”: The unit will not print the Caller ID list, but
will keep records of the information for the last 30
callers.
Code #30: Changing the silent fax
recognition ring setting
SILENT FAX RING
RINGS=3
[±]
To change the number of times the unit rings
while in TEL/FAX mode. You can select “3”
(default), “4”, “5”, “6”, “7”, “8” or “9”. See
page 33 for details.
Code #37: Receiving other size documents
AUTO REDUCTION
=ON
[±]
To receive a fax document that is longer than
your recording paper.
“ON” (default): The unit will fit received
documents onto your recording paper.
“OFF”: The unit will print the original size.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL
[±]
“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=ON
[±]
6. Press {SET}.
If you wish to use an extension telephone to
receive faxes, activate this feature and program
the activation code.
7. Enter the fax number.
1. Press {MENU}.
5. Press {A} or {B} repeatedly to select “ON”.
40
FL611BL-PFQX2200ZA-en.book Page 41 Thursday, April 7, 2005 1:15 PM
6. Programmable Features
2. Press {#}, then {4}{1}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9,
{*} and {#}.
L The default code is “;#9”.
L Do not enter “0000”.
6. Press {SET}.
To answer a call with an extension telephone in
TEL/FAX mode (page 33), activate this feature
and program the code.
1. Press {MENU}.
2. Press {#}, then {4}{9}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
7. Press {MENU}.
5. Enter your code (2–4 digits) using the dial
keys 0–9 and {*}.
L The default code is “;0”.
Code #44: Setting the memory reception alert
6. Press {SET}.
RECEIVE ALERT
=ON
[±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
“ON” (default): You will be alerted to a reception
problem by a beeping sound.
“OFF”: Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON
[±]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
“ON” (default): You do not have to press {FAX
START} for fax reception.
“OFF”: You have to press {FAX START} for fax
reception.
Code #48: Selecting the language
LANGUAGE
=ENGLISH
[±]
The display and reports will be in the selected
language.
“ENGLISH” (default): English is used.
“FRENCH”: French is used.
1. Press {MENU}.
2. Press {#}, then {4}{8}.
3. Press {A} or {B} repeatedly to select the
desired language.
4. Press {SET}.
5. Press {MENU}.
Code #49: Setting the auto disconnection
7. Press {MENU}.
Code #58: Setting the scan contrast
SCAN CONTRAST
=NORMAL
[±]
To send or copy a document with faint or dark
writing, set this feature before transmission or
copying.
“NORMAL” (default): Used for normal writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
Code #68: Setting the Error Correction Mode
(ECM)
ECM SELECTION
=ON
[±]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
“ON” (default): To send a fax even if there is
static interference on the telephone line.
“OFF”: Deactivates this feature.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON
[±]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones:
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party’s machine.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
L If the ring back tone continues, the other
party’s machine may not be a fax machine or
may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be
adjusted.
AUTO DISCONNECT
=ON
[±]
41
FL611BL-PFQX2200ZA-en.book Page 42 Thursday, April 7, 2005 1:15 PM
6. Programmable Features
Code #77: Changing the receiving mode in
the auto answer setting
AUTO ANSWER
=FAX ONLY
[±]
“FAX ONLY” (default): Fax only mode (page 33)
“TEL/FAX”: Telephone/Fax mode (page 33)
Code #78: Changing the TEL/FAX delayed
ring setting
TEL/FAX RING
RINGS=2
[±]
If you use an extension telephone in TEL/FAX
mode, select the desired number of times the
extension telephone rings before the unit
answers the call. You can select “1”, “2”
(default), “3”, “4”, “5”, “6”, “7” “8” or “9”. See
page 33 for details.
Code #79: Setting toner save feature
TONER SAVE
=OFF
[±]
“ON”: The toner cartridge will last longer.
“OFF” (default): Deactivates this feature.
Note:
L This feature may lower the print quality by
reducing toner consumption.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO
[±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “YES”.
4. Press {SET}.
6.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 39 to
page 42.
1
2
3
Press {MENU}.
4
5
Press {SET}.
Press {#} and the 2-digit code number.
Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
To exit programming, press {MENU}.
6.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial
keypad. See page 17 for details.
{#}{0}{2} Your logo
L Enter your logo using the dial keypad. See
page 18 for details.
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad.
See page 19 for details.
{#}{0}{4} Sending report
– {1}:“ON”
– {2}:“OFF”
– {3}:“ERROR” (default)
5. Press {SET} again.
6. Press {MENU}.
L The language setting (feature #48, page 41)
will not be reset.
{#}{0}{6} FAX ring count
– {1}:“1”
– {2}:“2” (default)
– {3}:“3”
– {4}:“4”
– {5}:“5”
– {6}:“6”
– {7}:“7”
– {8}:“8”
– {9}:“9”
{#}{1}{2} Remote activation ID
– {1}:“ON”
– {2}:“OFF” (default)
42
FL611BL-PFQX2200ZA-en.book Page 43 Thursday, April 7, 2005 1:15 PM
6. Programmable Features
L If you select “ON”, then enter your ID from 1
to 5 digits using 0-9, {*} and {#}.
{#}{1}{7} Ringer pattern
– {1}:“A” (default)
– {2}:“B”
– {3}:“C”
{#}{2}{2} Automatic journal report
– {1}:“ON” (default)
– {2}:“OFF”
{#}{2}{3} Overseas mode
– {1}:“NEXT FAX”
– {2}:“OFF”
– {3}:“ERROR” (default)
{#}{2}{5} Delayed send
– {1}:“ON”
– {2}:“OFF” (default)
L If you select “ON”, next enter the fax number
and transmission time using the dial keypad
(see feature #25 on page 40 for details).
{#}{2}{6} Automatic Caller ID list
– {1}:“ON” (default)
– {2}:“OFF”
{#}{3}{0} Silent fax ring setting
– {3}:“3” (default)
– {4}:“4”
– {5}:“5”
– {6}:“6”
– {7}:“7”
– {8}:“8”
– {9}:“9”
{#}{3}{7} Auto reduction
– {1}:“ON” (default)
– {2}:“OFF”
{#}{3}{9} Display contrast
– {1}:“NORMAL” (default)
– {2}:“DARKER”
{#}{4}{1} Fax activation code
– {1}:“ON” (default)
– {2}:“OFF”
– {2}:“OFF”
{#}{4}{8} Language
– {1}:“ENGLISH” (default)
– {2}:“FRENCH”
{#}{4}{9} Auto disconnection
– {1}:“ON” (default)
– {2}:“OFF”
{#}{5}{8} Scan contrast
– {1}:“NORMAL” (default)
– {2}:“LIGHT”
– {3}:“DARKER”
{#}{6}{8} ECM selection
– {1}:“ON” (default)
– {2}:“OFF”
{#}{7}{6} Connecting tone
– {1}:“ON” (default)
– {2}:“OFF”
{#}{7}{7} Auto answer
– {1}:“TEL/FAX”
– {2}:“FAX ONLY” (default)
{#}{7}{8} TEL/FAX ring setting
– {1}:“1”
– {2}:“2” (default)
– {3}:“3”
– {4}:“4”
– {5}:“5”
– {6}:“6”
– {7}:“7”
– {8}:“8”
– {9}:“9”
{#}{7}{9} Toner save
– {1}:“ON”
– {2}:“OFF” (default)
{#}{8}{0} Set default
– {1}:“YES”
– {2}:“NO” (default)
L If you select “YES”, press {SET} 2 times,
then press {MENU} to exit.
L If you select “ON”, next enter your code from
2 to 4 digits using 0-9, {*} and {#}.
{#}{4}{4} Memory reception alert
– {1}:“ON” (default)
– {2}:“OFF”
{#}{4}{6} Friendly reception
– {1}:“ON” (default)
43
FL611BL-PFQX2200ZA-en.book Page 44 Thursday, April 7, 2005 1:15 PM
7. Help
7 HelpMessages
Error
7.1 Error messages –
Reports
If a problem occurs during fax transmission or
reception, one of the following messages will be
printed on the sending and journal reports (page
28).
COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)
L A transmission or reception error occurred.
Try again or check with the other party.
COMMUNICATION ERROR
(Code: 43, 44)
L A line problem occurred. Connect the
telephone line cord to a different jack and try
again.
L An overseas transmission error occurred. Try
using the overseas mode (feature #23, page
40).
DOCUMENT JAMMED
L The document is jammed. Remove the
jammed document (page 56).
ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)
L A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.
JUNK FAX PROH. REJECT
L The junk fax prohibitor feature of this unit
rejected fax reception.
MEMORY FULL
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 13)
or clear the jammed paper (page 53).
NO DOCUMENT
L The document was not fed into the unit
properly. Re-insert it and try again.
OTHER FAX NOT RESPONDING
L The other party’s fax machine is busy or has
run out of recording paper. Try again.
L The other party’s fax machine rings too many
times. Send the fax manually (page 27).
L The other party’s machine is not a fax
machine. Check with the other party.
L The number you dialled is not in service.
PRESSED THE STOP KEY
L {STOP} was pressed and fax communication
was cancelled.
44
THE COVER WAS OPENED
L The front cover was opened. Close it and try
again.
OK
L Fax transmission or reception was
successful.
7.2 Error messages –
Display
If the unit detects a problem, one or more of the
following messages will appear on the display.
—————————————————————
CALL SERVICE
L There is something wrong with the unit.
Contact our service personnel.
—————————————————————
CHANGE DRUM
b
CHANGE SUPPLIES
L There is something wrong with the drum unit.
Replace the drum unit and the toner cartridge
(page 51).
—————————————————————
CHECK DOCUMENT
L The document was not fed into the unit
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 57) and try
again.
—————————————————————
CHECK DRUM
L The drum unit is not inserted properly. Reinsert it correctly (page 10).
—————————————————————
CHECK MEMORY
PROB.MEMOIRE
L The memory (telephone numbers,
parameters, etc.) has been erased. Reprogram.
—————————————————————
COVER OPEN
FL611BL-PFQX2200ZA-en.book Page 45 Thursday, April 7, 2005 1:15 PM
7. Help
L The front cover is open. Close it.
—————————————————————
DIRECTORY FULL
L There is no space to store new items in
navigator directory. Erase unnecessary items
(page 22).
—————————————————————
DRUM LIFE OVER
REPLACE DRUM
b
L When making a copy, the document being
stored exceeded the memory capacity of the
unit. Press {STOP} to clear the message.
Divide the document into sections.
—————————————————————
MODEM ERROR
L There is something wrong with the unit’s
modem. Contact our service personnel.
—————————————————————
NO FAX REPLY
CHANGE SUPPLIES
L The drum life is complete. Replace the drum
unit immediately (page 51).
—————————————————————
L The other party’s fax machine is busy or has
run out of recording paper. Try again.
—————————————————————
OUT OF PAPER
FAILED PICK UP
L Recording paper was not fed into the unit
properly. Re-insert the recording paper (page
56).
—————————————————————
FAX IN MEMORY
L The unit has a document in memory. See the
other displayed message instructions to print
out the document. For fax memory capacity,
see page 60.
—————————————————————
FAX MEMORY FULL
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 13)
or clear the jammed paper (page 53).
L When performing memory transmission, the
document being stored exceeded the
memory capacity of the unit. Send the entire
document manually.
—————————————————————
LOW TEMP.
L The inside of the unit is extremely cold and
cannot be operated. Use the unit in a warmer
area. While the unit cannot be operated, the
received documents are temporarily stored
into the memory, and will be printed out
automatically when the unit warms up.
—————————————————————
MEMORY FULL
L Recording paper is not installed or the unit
has run out of paper. Install paper (page 13).
L Recording paper is not fed into the unit
properly. Reinstall paper (page 13).
—————————————————————
PAPER JAMMED
L A recording paper jam occurred. Clear the
jammed paper (page 53).
—————————————————————
PLEASE WAIT
L The unit is warming up. Wait for a while.
—————————————————————
POLLING ERROR
L The other party’s fax machine does not offer
the polling function. Check with the other
party.
—————————————————————
REDIAL TIME OUT
L The other party’s fax machine is busy or has
run out of recording paper. Try again.
—————————————————————
REMOVE DOCUMENT
L The document is jammed. Remove the
jammed document (page 56).
L Attempted to send a document longer than
600 mm. Press {STOP} to remove the
document. Divide the document into two or
more sheets and try again.
45
FL611BL-PFQX2200ZA-en.book Page 46 Thursday, April 7, 2005 1:15 PM
7. Help
—————————————————————
REPLACE DRUM
SOON
L The drum life is near to an end. Replace the
drum unit as soon as possible (page 51).
—————————————————————
TONER EMPTY
b
CHANGE SUPPLIES
L The toner life is complete. Replace the toner
cartridge immediately (page 51).
—————————————————————
TONER LOW
b
CHANGE SUPPLIES
L The toner life is near to an end. Replace the
toner cartridge as soon as possible (page
51).
—————————————————————
TRANSMIT ERROR
L A transmission error occurred. Try again.
—————————————————————
WARM UP
L The inside of the unit is too cold. Let the unit
warm up. Wait for a while.
—————————————————————
WRONG PAPER
L The fax message was printed on paper which
is shorter than A4 size paper. Use the
appropriate size paper (page 61).
46
FL611BL-PFQX2200ZA-en.book Page 47 Thursday, April 7, 2005 1:15 PM
7. Help
Troubleshooting
7.3 When a function does not work, check here
7.3.1 Initial settings
Problem
Cause & Solution
I cannot hear a dial tone.
L If you use a splitter to connect the unit, remove the splitter and
connect the unit to the wall jack directly. If the unit operates
properly, check the splitter.
L Disconnect the unit from the telephone line and connect a known
working telephone. If the working telephone operates properly,
contact our service personnel to have the unit repaired. If the
working telephone does not operate properly, contact your
telephone company.
L The power cord or telephone line cord is not connected. Check the
connections.
L If you connected the fax machine through a computer modem,
connect the fax machine directly to a telephone line jack.
The unit does not ring.
L The ringer volume is turned OFF. Adjust it (page 16).
7.3.2 General
Problem
Cause & Solution
The other party complains
they only hear a fax tone
and cannot talk.
L FAX ONLY mode is set. Tell the other party the number is only used
for faxes.
L Change to TEL mode (page 32) or TEL/FAX mode (page 33).
The {REDIAL/PAUSE}
button does not function
properly.
L If this button is pressed during dialling, a pause will be inserted. If
pressed immediately after a dial tone is obtained, the last number
dialled will be redialled.
During programming, I
cannot enter the code or
ID number.
L All or part of the number is the same. Change the number: feature
#12 (page 39), #41 (page 40) and #49 (page 41).
The unit beeps.
L Recording paper has run out. Press {STOP} to stop the beeps and
install paper.
7.3.3 Fax – sending
Problem
Cause & Solution
I cannot send documents.
L The other party’s fax machine is busy or has run out of recording
paper. Try again.
L The other party’s machine is not a fax machine. Check with the
other party.
L The other party’s fax machine failed to answer the fax
automatically. Send the fax manually (page 27).
I cannot send a fax
overseas.
L Use the overseas transmission mode (feature #23 on page 40).
L Add two pauses at the end of the telephone number or dial
manually.
47
FL611BL-PFQX2200ZA-en.book Page 48 Thursday, April 7, 2005 1:15 PM
7. Help
Problem
Cause & Solution
The other party complains
that letters on their
received document are
distorted or not clear.
L If your line has special telephone services such as call waiting, the
service may have been activated during fax transmission. Connect
the unit to a line that does not have these services.
L Another telephone on the same line is off the hook. Hang up the
extension telephone and try again.
L Try copying the document. If the copied image is clear, there may
be something wrong with the other party’s machine.
The other party complains
that black lines, white
lines or smudges appear
on their received
document.
L The glass or rollers are dirty with correction fluid, etc. Clean them
(page 57). Please do not insert a document before correction fluid
has dried completely.
7.3.4 Fax – receiving
Problem
Cause & Solution
I cannot receive
documents automatically.
L The receiving mode is set to TEL mode. Set to FAX ONLY mode
(page 33) or TEL/FAX mode (page 33).
L The time taken to answer the call is too long. Decrease the number
of rings before the unit answers a call (feature #06 on page 39 and
#78 on page 42).
The display shows
“CONNECTING.....”, but
faxes are not received.
L The incoming call is not a fax. Change the receiving mode to TEL
mode (page 32) or TEL/FAX mode (page 33).
A blank sheet is ejected.
L The other party placed the document in their fax machine the
wrong way. Check with the other party.
The printing quality is
poor.
L If documents can be copied properly, the unit is working normally.
The other party may have sent a faint document or there may be
something wrong with the other party’s machine. Ask them to send
a clearer copy of the document or to check their fax machine.
L Some paper has instructions recommending which side to print on.
Try turning the paper over.
L You may have used paper with a cotton and/or fibre content that is
over 20%, such as letterhead or resume paper.
L The remaining toner is low. Replace the toner cartridge (page 51).
L We recommend you replace the drum unit every fourth time you
replace the toner cartridge (page 51). To check the drum life and
quality, please print the printer test list (page 59).
L The toner save mode is ON (feature #79 on page 42).
The other party complains
that they cannot send a
document.
L The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 13)
or clear the jammed paper (page 53).
L The unit is not in FAX ONLY mode. Press {AUTO ANSWER}
repeatedly to turn ON the {AUTO ANSWER} light.
48
FL611BL-PFQX2200ZA-en.book Page 49 Thursday, April 7, 2005 1:15 PM
7. Help
Problem
I cannot select the desired
receiving mode.
Cause & Solution
L If you want to set FAX ONLY mode or TEL/FAX mode:
– select the desired mode using feature #77 (page 42), and press
{AUTO ANSWER} repeatedly to turn ON the {AUTO
ANSWER} light.
L If you want to set TEL mode:
– press {AUTO ANSWER} repeatedly to turn OFF the {AUTO
ANSWER} light.
7.3.5 Copying
Problem
Cause & Solution
The unit will not make a
copy.
L You cannot make a copy during programming. Make the copy after
programming.
L The document was not fed into the unit properly. Re-insert the
document.
L Recording paper is not installed or the unit has run out of paper.
Install paper (page 13).
A black line, a white line or
smudge appears on the
copied document.
L The glass or rollers are dirty with correction fluid, etc. Clean them
(page 57). Please do not insert a document before correction fluid
has dried completely.
The printing quality is
poor.
Original
Copy
ABC
L Some paper has instructions recommending which side to print on.
Try turning the paper over.
L You may have used paper with a cotton and/or fibre content that is
over 20%, such as letterhead or resume paper.
L The remaining toner is low. Replace the toner cartridge (page 51).
L We recommend you replace the drum unit every fourth time you
replace the toner cartridge (page 51). To check the drum life and
quality, please print the printer test list (page 59).
L The toner save mode of feature #79 is ON (page 42).
7.3.6 Using an answering machine
Problem
Cause & Solution
I cannot receive
documents automatically.
L Your greeting message on the answering machine is too long.
Shorten the message. Record a message up to 10 seconds long.
L The answering machine rings too many times. Set to 1 or 2 rings.
I cannot receive voice
messages.
L Check if the answering machine is turned ON and connected to the
fax machine properly (page 34).
L Set the number of rings on the answering machine to 1 or 2.
I cannot retrieve recorded
voice messages on the
answering machine from
a remote location.
L You did not program your remote access code into your fax
machine correctly. Program the same code that is programmed on
the answering machine on the fax machine with feature #12 (page
39).
49
FL611BL-PFQX2200ZA-en.book Page 50 Thursday, April 7, 2005 1:15 PM
7. Help
Problem
Cause & Solution
I pressed the remote
access code to access the
answering machine
remotely, but the line was
disconnected.
L The code may include “#” which is used for certain features
provided by telephone companies. Change the code on the
answering machine to another number which does not include “#”.
Also change the code of the fax machine with feature #12 (page
39).
Callers complain that they
cannot send a document.
L Your answering machine has run out of recording tape. Rewind the
tape to record messages.
L You set the answering machine to only give a greeting message.
7.3.7 If a power failure occurs
L The unit will not function.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L If any fax documents are stored in the memory, they will be lost. When power is restored, a power
down report will be printed stating which documents in memory have been erased.
50
FL611BL-PFQX2200ZA-en.book Page 51 Thursday, April 7, 2005 1:15 PM
7. Help
Replacement
1
Before opening the protection bag of the new
toner cartridge, shake it vertically more than
5 times.
2
Remove the new toner cartridge from the
protection bag. Peel off the seal (1) from the
toner cartridge.
7.4 Replacing the toner
cartridge and the drum
unit
When the display shows the following, replace
the toner cartridge.
TONER LOW
TONER EMPTY
We recommend you replace the drum unit
every fourth time you replace the toner
cartridge. To check the drum life and quality,
please print the printer test list (page 59). To
ensure that the unit operates properly, we
recommend the use of Panasonic toner
cartridge (Model No. KX-FA83X) and drum
unit (Model No. KX-FA84X). See page 8 for
accessory information.
To maintain print quality and machine life, we
recommend you to clean slots and openings
(page 4) and the inside of the unit (page 57)
when replacing the toner cartridge and/or drum
unit.
Caution:
L We cannot be responsible for any damage
to the unit or degradation of print quality
which may occur from the use of a nonPanasonic toner cartridge and drum unit.
L The drum unit contains a photosensitive
drum. Exposing it to light may damage the
drum.
Once you have opened the protection
bag:
– Do not expose the drum unit to light for
more than 5 minutes.
– Do not touch or scratch the green
drum surface.
– Do not place the drum unit near dust or
dirt, or in a high humidity area.
– Do not expose the drum unit to direct
sunlight.
L Do not unplug the fax machine. Loss of
fax documents in memory may occur.
L Do not leave the toner cartridge out of the
protection bag for a long time. It will
decrease the toner life.
L Do not add toner to the toner cartridge.
1
3
Lift open the front cover (1), holding OPEN
(2).
1
2
3
Caution:
The fuser unit (3) gets hot. Do not
touch it.
4
Tap on the used toner cartridge several times
to allow the remaining toner to fall into the
51
FL611BL-PFQX2200ZA-en.book Page 52 Thursday, April 7, 2005 1:15 PM
7. Help
drum unit. Remove the drum and toner unit
(1) by holding the two tabs.
6
Remove the used cartridge (1) from the
drum unit (2).
1
2
2
1
L Do not touch the transfer roller (2).
L If you replace the toner cartridge and the
drum unit at the same time, skip to step 7.
5
3
L The toner may stick to the cartridge and
the drum unit. Be careful when handling.
See page 4 for details.
L Do not drop the toner on the green drum
surface (3).
L Put the used toner cartridge into the
protection bag.
Turn the two levers (1) on the used toner
cartridge firmly, until the triangles (2) match.
7
1
If you replace the drum unit at the same time,
remove the new drum unit from the
protection bag.
Place the new toner cartridge (1) into the
drum unit (2) vertically.
1
2
2
52
FL611BL-PFQX2200ZA-en.book Page 53 Thursday, April 7, 2005 1:15 PM
7. Help
8
Firmly press down the toner cartridge to
snap into position.
11 Install the drum and toner unit (1) by holding
the tabs.
1
9
Turn the two levers (1) on the toner
cartridge firmly.
1
12 Close the front cover (1) by pushing down
on both sides, until locked.
1
10 Make sure that the triangles (1) match, to
install the toner cartridge correctly.
1
L While the unit displays “PLEASE WAIT”,
do not open the front cover, or disconnect
the power cord.
L If the lower glass (2) is dirty, clean it with
a soft and dry cloth.
Waste disposal method
Waste material should be disposed of under
conditions which meet all national and local
environmental regulations.
Jams
7.5 Recording paper jam
2
7.5.1 When the recording paper
has jammed in the unit
The display will show the following.
PAPER JAMMED
53
FL611BL-PFQX2200ZA-en.book Page 54 Thursday, April 7, 2005 1:15 PM
7. Help
1
Lift open the front cover (1), holding OPEN
(2).
L Do not touch the transfer roller (2).
When the recording paper has jammed
near the recording paper exit:
1. Pull the tension plate forward (1), then
remove the paper tray cover (2).
1
2
2
1
3
Caution:
The fuser unit (3) gets hot. Do not
touch it.
2
Remove the jammed paper.
When the recording paper has jammed
near the drum and toner unit:
Remove the jammed paper (1) carefully by
pulling it toward you.
2. Remove the recording paper (1), then
remove the drum and toner unit (2) to
allow the jammed paper (3) to pull free
from the rear cabinet.
2
1
2
1
54
3
FL611BL-PFQX2200ZA-en.book Page 55 Thursday, April 7, 2005 1:15 PM
7. Help
3. Lift both green levers (1) forward until
they stop.
3
Close the front cover (1) by pushing down
on both sides, until locked.
1
1
4
4. Remove the jammed paper (1) from the
fuser unit by pulling it upwards carefully,
then install the drum and toner unit.
Re-insert the recording paper (1).
L Before re-inserting, make sure to fan and
straighten the recording paper.
1
1
5. Push back the levers (1) to the original
position.
5
Attach the paper tray cover (1), then push
back the tension plate (2).
1
2
1
55
FL611BL-PFQX2200ZA-en.book Page 56 Thursday, April 7, 2005 1:15 PM
7. Help
7.5.2 When the recording paper
is not fed into the unit properly
2
Hold the centre part of the front cover (1),
and pull open the inner cover (2).
The display will show the following.
FAILED PICK UP
1
1
Pull the tension plate forward (1), then
remove the paper tray cover (2). Remove
the recording paper (3).
2
3
2
3
L Do not touch the transfer roller (3).
3
1
2
Re-insert the recording paper. Attach the
paper tray cover, then push back the tension
plate (see steps 5 to 6 on page 14).
L Before re-inserting, make sure to fan and
straighten the recording paper.
7.6 Document jams sending
1
Lift open the front cover (1), holding OPEN
(2).
1
2
3
Caution:
The fuser unit (3) gets hot. Do not
touch it.
56
Remove the jammed document carefully
(1).
1
4
5
Push back the inner cover.
Close the front cover (1) by pushing down
on both sides, until locked.
1
FL611BL-PFQX2200ZA-en.book Page 57 Thursday, April 7, 2005 1:15 PM
7. Help
Caution:
The fuser unit (3) gets hot. Do not
touch it.
Note:
L Do not pull out the jammed document forcibly
before opening the front cover.
3
Clean the document separation roller (1)
with a cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly.
1
Cleaning
7.7 Cleaning the inside of
the unit
4
Clean the inside of the unit when:
– Document frequently misfeed.
– Black line, a white line or a dirty pattern
appear on the original document when
sending or copying.
1
Caution:
L Be careful when handling the drum and
toner unit.
See the caution for the drum unit on page
51 for details.
L Do not use paper products, such as paper
towels or tissues, to clean the inside of
the unit.
1
Disconnect the power cord and the
telephone line cord.
2
Lift open the front cover (1), holding OPEN
(2).
Hold the centre part of the front cover (1),
and pull open the inner cover (2).
2
3
L Do not touch the transfer roller (3).
5
Clean the document feeder roller (1) with a
cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly.
Clean the upper glass (2) with a soft and dry
cloth.
1
1
2
3
2
6
Push back the inner cover.
57
FL611BL-PFQX2200ZA-en.book Page 58 Thursday, April 7, 2005 1:15 PM
7. Help
7
Remove the drum and toner unit (1) by
holding the two tabs.
10 Close the front cover (1) by pushing down
on both sides, until locked.
1
1
8
Clean the lower glass (1) with a soft and dry
cloth.
11 Reconnect the power cord and the telephone
line cord.
Note:
L Do not touch the transfer roller (1).
1
9
Reinstall the drum and toner unit (1) by
holding the tabs.
1
58
1
FL611BL-PFQX2200ZA-en.book Page 59 Thursday, April 7, 2005 1:15 PM
8. General Information
8 General
Printed
Reports
Information
8.1 Reference lists and
reports
You can print out the following lists and reports
for your reference.
Setup list:
provides you with the current settings of the
basic and advanced programming features
(page 39 to page 42).
Telephone number list:
provides you with names and numbers which are
stored in the one-touch dial feature and
navigator directory.
Journal report:
keeps records of fax transmission and reception.
This report can be printed automatically after
every 30 fax communications (feature #22 on
page 40).
Broadcast programming list:
provides you with names and numbers which are
stored in the broadcast memory (page 29).
Printer test:
allows you to check the print quality of your unit.
If the test print has a dirty pattern, or blurred
points or lines, clean the inside of the unit (page
57). If printing quality is still poor, replace the
toner cartridge and drum unit.
{MENU}
{STOP}
{<}{>}
{SET}
1
Press {MENU} repeatedly to display “PRINT
REPORT”.
2
Press {<} or {>} repeatedly to display the
desired item.
3
Press {SET} to start printing.
L To stop printing, press {STOP}.
4
Press {MENU}.
59
FL611BL-PFQX2200ZA-en.book Page 60 Thursday, April 7, 2005 1:15 PM
8. General Information
Specifications
8.2 Specifications
Applicable lines:
Public Switched Telephone Network
Document size:
Max. 216 mm in width, Max. 600 mm in length
Effective scanning width:
208 mm
Effective printing width:
202 mm
*1
Transmission time :
Approx. 8 s/page (ECM-MMR)*2
Scanning density:
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm – in standard resolution,
7.7 lines/mm – in fine/photo/photo with text
resolution,
15.4 lines/mm – in super fine resolution
Photo resolution:
64-level
Scanner type:
Contact Image Sensor
Printer type:
Laser Printer
Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
Modem speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400
bps; Automatic Fallback
Operating environment:
10 °C – 32.5 °C, 20 % – 80 % RH (Relative
Humidity)
Dimensions:
Approx. height 370 mm × width 430 mm × depth
480 mm
Mass (Weight):
Approx. 9.2 kg
Power consumption:
Standby: Approx. 4 W
Transmission: Approx. 12 W
Reception: Approx. 290 W
Copy: Approx. 290 W
Maximum: Approx. 950 W (When the fuser lamp
turns on)
Power supply:
220 – 240 V AC, 50 Hz
Fax memory capacity:
Approx. 120 pages of memory transmission
Approx. 170 pages of memory reception
60
(Based on the ITU-T No. 1 Test Chart in standard
resolution.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
Print speed:
Approx. 9 ppm (pages per minute)
Printing resolution:
600 × 600 dpi
*1 Transmission speed depends upon the
contents of the pages, resolution, telephone
line conditions and capability of the other
party’s machine.
*2 Transmission speed is based upon the ITU-T
No. 1 Test Chart. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
ITU-T No.1 Test Chart
FL611BL-PFQX2200ZA-en.book Page 61 Thursday, April 7, 2005 1:15 PM
8. General Information
Recording paper specifications
Recording paper size:
A4: 210 mm × 297 mm
Recording paper weight:
60 g/m2 to 90 g/m2
Note for recording paper:
L Do not use the following types of paper:
– Paper with a cotton and/or fibre content
that is over 20 %, such as letterhead
paper or paper used for resumes
– Extremely smooth or shiny paper, or
paper that is highly textured
– Coated, damaged or wrinkled paper
– Paper with foreign objects attached, such
as tabs or staples
– Paper which has dust, lint or oil stains
– Paper that will melt, vaporize, discolour,
scorch or emit dangerous fumes near
200 °C, such as vellum paper. These
materials may transfer onto the fusing
roller and cause damage.
– Moist paper
– Inkjet paper
L Some paper only accepts print on one side.
Try using the other side of the paper if you are
not happy with the print quality or if
misfeeding occurs.
L For proper paper feeding and best print
quality, we recommend using long-grained
paper.
L Do not use paper of different types or
thickness at the same time. This may cause a
paper jam.
L Avoid double-sided printing.
L Do not use paper printed from this unit for
double-sided printing with other copiers or
printers. This may cause a paper jam.
L To avoid curling, do not open paper packs
until you are ready to use the paper. Store
unused paper in the original packaging, in a
cool and dry location.
Toner life
Toner life depends on the amount of content in a
received, copied or printed document. The
following is the approximate relationship
between image area and toner life for
replacement toner cartridge (Model No. KXFA83X). Toner life varies in actual usage.
5 % image area
Approx. 2,500 sheets of A4 size paper can be
printed.
10 % image area
Approx. 1,200 sheets of A4 size paper can be
printed.
15 % image area
61
FL611BL-PFQX2200ZA-en.book Page 62 Thursday, April 7, 2005 1:15 PM
8. General Information
Approx. 800 sheets of A4 size paper can be
printed.
Note:
L The image area changes with the depth,
thickness and size of the characters.
L If you turn on the toner save feature, the toner
cartridge will last approx. 40% longer.
Drum life
The included drum unit or Model No. KX-FA84X
can print approx. 7,000 A4-sized sheets at 20
sheets per print job, and approx. 5,000 A4-sized
sheets at 1 sheet per print job regardless of the
content of the image area. The actual drum life is
determined by various factors, such as
temperature, humidity and type of paper, etc.
Note:
L Design and specifications are subject to
change without notice.
L The pictures and illustrations in these
instructions may vary slightly from the actual
product.
62
FL611BL-PFQX2200ZA-en.book Page 63 Thursday, April 7, 2005 1:15 PM
9. Index
9. Index
9.1 Index
# #01 Date and time: 17
#02 Your logo: 18
#03 Your fax number: 19
#04 Sending report: 28, 39
#06 FAX ring count: 39
#12 Remote activation ID: 39
#17 Ringer pattern: 16
#22 Automatic journal report: 28, 40
#23 Overseas mode: 40
#25 Delayed send: 40
#26 Automatic Caller ID list: 40
#30 Silent fax ring setting: 33, 40
#37 Auto reduction: 40
#39 Display contrast: 40
#41 Fax activation code: 40
#44 Memory reception alert: 41
#46 Friendly reception: 41
#48 Language: 41
#49 Auto disconnection: 41
#58 Scan contrast: 41
#68 ECM selection: 41
#76 Connecting tone: 41
#77 Auto answer: 42
#78 TEL/FAX ring setting: 33, 42
#79 Toner save: 42
#80 Set default: 42
A Accessories
Paper stacker: 12
Paper tray: 11
Paper tray cover: 11
Advanced features: 40
Alert
Memory reception (Feature #44): 41
Auto answer setting (Feature #77): 42
Auto disconnection (Feature #49): 41
Auto reduction (Feature #37): 40
B Basic features: 39
Broadcast transmission: 29
C Caller ID
Calling back: 24
Storing: 25
Caller ID list (Feature #26): 24, 40
Character table: 18
Cleaning: 57
Connecting tone (Feature #76): 41
Connections: 15
Copy: 36
Collation: 37
Enlarge: 36
Reduce: 36
D Date and time (Feature #01): 17
Delayed transmission (Feature #25): 40
Direct command: 42
Display
Contrast (Feature #39): 40
Error messages: 44
Document size: 28
Drum life: 62
Drum unit: 10, 51
E ECM selection (Feature #68): 41
Error messages: 44
Extension telephone: 32
F Fax activation code (Feature #41): 40
Fax number (Feature #03): 19
Friendly reception (Feature #46): 41
H Help: 16
J Jams
Document: 56
Recording paper: 53
Journal report (Feature #22): 28, 40
Junk fax prohibitor: 35
L Language selection (Feature #48): 41
Logo (Feature #02): 18
M Memory reception alert (Feature #44): 41
N Navigator directory
Making a phone call: 22
Sending faxes: 29
Storing: 21
O One-touch dial
Making a phone call: 22
Sending faxes: 29
Storing: 21
Overseas mode (Feature #23): 40
P Polling: 34
Power failure: 50
Programming: 38
Q Quick scan: 27
R Receiving faxes
Automatically: 33
Manually: 32
Recording paper: 13
Recording paper size: 61
Redialling: 27, 29
Remote activation ID (Feature #12): 39
63
FL611BL-PFQX2200ZA-en.book Page 64 Thursday, April 7, 2005 1:15 PM
9. Index
Reports
Broadcast programming: 59
Broadcast sending: 30
Caller ID: 24, 40
Journal: 28, 59
Power down: 50
Printer test: 59
Sending: 28, 39
Setup: 59
Telephone number: 59
Reset (Feature #80): 42
Resolution: 27, 36
Ringer pattern (Feature #17): 16, 39
Ring setting
FAX ONLY (Feature #06): 39
Silent fax (Feature #30): 40
TEL/FAX (Feature #78): 42
S Scan contrast (Feature #58): 41
Sending faxes
Broadcast: 30
From memory: 27
Manually: 27
Navigator directory: 29
One-touch dial: 29
Sending report (Feature #04): 28, 39
Set default (Feature #80): 42
Storing
Broadcast: 29
Navigator directory: 21
One-touch dial: 21
T Toner cartridge
Installing: 10
Replacing: 51
Toner life: 61
Toner save (Feature #79): 11, 42
V Volume: 16
64
FL611BL-PFQX2200ZA-en.book Page 65 Thursday, April 7, 2005 1:15 PM
65
FL611BL-PFQX2200ZA-en.book Page 66 Thursday, April 7, 2005 1:15 PM
66
FL611BL-PFQX2200ZA-en.book Page 67 Thursday, April 7, 2005 1:15 PM
67
FL611BL-PFQX2200ZA-en.book Page 68 Thursday, April 7, 2005 1:15 PM
0682
Manufacturer:
Panasonic Communications (Malaysia) Sdn. Bhd.
PLO No.1, Kawasan Perindustrian Senai, KB No. 104, 81400 Senai, Negeri Johor Darul Ta zim, Malaysia
Global web site:
http://www.panasonic.co.jp/global/
PFQX2200ZA
CM0305DT0
0/2
PFQXxxxxZA
CM0405CE0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising