Panasonic KXP1695 Hints and Tips

TechInfo Sheet
fax: 01344 853394
Data Products
email: [email protected]
Product Group: Printers
Model: KX-P1695
Date: 25/09/98
Revision No: 1.0
Subject: Changing top of form setting.
Document No: 002
Question: How do I change the position of the first line of print in relation to the top of my page.
Answer:
Firstly you will need to have loaded the paper into your printer by using the Load/Park
facility from the bail release lever. Once the paper is inserted correctly use the following
combinations of buttons to advance or reverse the paper to the correct top of form setting:
ON LINE
ON LINE
FF
+
LF
+
To micro line feed forwards by holding each key down once
simultaneously.
To reverse micro line feed the paper by holding down each key
once
simultaneously.
By moving the paper installed in the printer using the above button combinations the top of
form setting is changed and stored electronically. To store the new setting use the following
button combination:
FUNCTION
To enter Function mode, then
To exit press
ON LINE
to set top of form to the current
position.
FUNCTION
N.B. When performing paper installation or adjusting the paper position please ensure that the
platen roller knob is not used, this setting can only be changed electronically via the front
panel.
Panasonic CS U.K.
Document No: 002
Model: KX-P1695
1
TechInfo Sheet
fax: 01344 853394
Data Products
email: [email protected]
Panasonic CS U.K.
Document No: 002
Model: KX-P1695
2