Aeg-Electrolux | T59800 | User manual | Aeg-Electrolux T59800 User Manual

LAVATHERM 59800
Condenser Dryer with Heat Pump
User information
Dear Customer,
Please read this user information carefully and keep it to refer to later.
Please pass the user information on to any future owner of the appliance.
1
3
2
2
The following symbols are used in the text:
Safety instructions
Warning! Information that affects your personal safety.
Important! Information that prevents damage to the appliance.
Useful tips and hints
Environmental information
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Environmental tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Description of machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Operating screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Before the first drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Sorting and preparing laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Programme overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching machine on / switching light on . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening loading door / loading laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting time delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing laundry or loading laundry when necessary . . . . . . . . . . . . . . . . .
Drying cycle complete / removing laundry . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
12
12
12
13
14
14
14
15
15
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning lint filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the door seal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Emptying the water reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the fluff filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clean operating screen and housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
16
17
17
18
20
20
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting by yourself . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing the bulb for interior lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Programming options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Consumption values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3
Installation and connection instructions. . . . . . . . . . . . . . . . .
25
Installation safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Removing transport safety packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Door reversal instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Special accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service and Spare Parts
4
30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Operating Instructions
1 Safety
Prior to initial start up
• Note the ”Installation and connection instructions”
• Before first starting up, check the machine for any damage incurred
during transport. Never connect a damaged machine. If parts are
damaged, contact your supplier.
Intended use
• The dryer is intended for drying standard laundry in domestic environments.
• Conversions or modifications to the dryer are not permitted.
• The laundry must not contain flammable solvents (benzene,
alcohol, stain remover, etc.) . Risk of fire and/or explosion! Laundry
which has come into contact with such substances must be rinsed
thoroughly by hand before drying.
• When using dry-cleaning sets: Only use those products which are declared as suitable for the dryer by the manufacturer.
• Do not place items of laundry in the dryer which contain foam rubber
or materials similar to rubber. Risk of fire!
• Do not place heavily worn laundry items in the dryer. Risk of fire!
• Do not place laundry items with loose fillings (e.g. cushions) in the
dryer. Risk of fire!
• Parts with rigid components (e.g. door mats) may cover the air slots.
Risk of fire! Do not place such items in the dryer.
• Do not overfill the dryer. Risk of fire! Observe max. loading volume of
6 kg.
• Ensure that explosive objects (e.g. cigarette lighters, spray cans, etc.)
do not enter the dryer with the laundry. Risk of fire and/or explosion!
• Clean the micro-fine filter and fine strainer after each drying cycle.
• Do not use the machine if there are no lint filters or if these are damaged. Risk of fire!
• Clean the fluff filter behind the base door regularly.
• With stacked washer and dryer: Do not place objects on the dryer.
These may fall off during operation.
• The lampcover for the interior light must be screwed down tightly.
5
Child safety
• Keep packaging away from children. Risk of suffocation!
• Children can often not see the dangers associated with electrical appliances. Never leave unsupervised children near the dryer.
• Ensure that children and small animals cannot climb into the dryer’s
drum. Risk of death! Keep the dryer door shut whenever it is not being used.
General safety
• Only our qualified engineers may undertake repairs on the dryer.
• Never start up the dryer if the mains cable is damaged or if the operating screen, operating plate or base area are damaged so that the inside of the machine is open and accessible.
• Switch off the dryer before all cleaning, care or maintenance work.
Also disconnect the mains plug from the socket or – with permanent
connections – switch off the LS switch in the fuse box and/or remove
the fuse.
• Disconnect the machine from the power supply when it is not in use.
• When removing from the socket, never pull the mains plug by the cable, instead take a hold of the plug.
• Adapter plugs, couplings and extension cables must not be used. Risk
of fire from overheating!
• Do not spray down the dryer with jets of water. Risk of electric shock!
• Do not lean on the open door. The machine may tip over.
• Once the drying cycle has been interrupted, the laundry and drum
may be hot. Risk of burns! Take care when removing the laundry.
Disposal
2
6
Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at your local waste disposal facilities.
2
Old appliance
W
1
The symbol
on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
The heat pump of your dryer contains a closed refrigerant circuit filled
with a refrigerant which is free from fluoro-chloro-hydrocarbons. The
refrigerant circuit in the heat pump must not be damaged.
Warning! When your appliance has finished it's working life, remove
the plug from the mains socket. Cut off the cable and plug and dispose
of them.
Destroy the door lock. This prevents children from trapping themselves
inside and endangering their lives.
2 Environmental tips
• Your dryer will function most economically if you:
– always keep the ventilation slots on the base of the dryer unobstructed;
– use the loading volumes specified in the programme overview;
– ensure you have good ventilation in the installation room;
– clean the micro-fine filter and fine strainer after each drying cycle;
– spin the laundry well before drying. Example: Consumption data –
depending on spinning speed – for 6kg of laundry, dried using the
COTTONS STORAGE DRY programme.
Pre-draining
Revolutions per
minute
Drying cycle
Residual dampness
Energy
in kWh
in litres
as a %
1000
3.6
60
2,1
1200
3.2
53
1,9
1400
3.0
50
1,8
1800
2.5
42
1,5
7
Description of machine
Display panel
Water reservoir
Fine strainer
(lint filter)
Lamp for interior
illumination
Large mesh filter
(lint filter)
Micro-fine filter
(lint filter)
Rating plate
Loading door
(reversible)
Base door
upstream of
fluff filter and
heat exchanger
Screwed feet
(with height
adjustment)
Air slots
Operating screen
INTENSITY button
Display showing
level of dryness
Multi-display
DELAY TIMER
button
Programme progress display
Block of buttons and displays
8
Programme selector
Maintenance displays
– EMPTY WATER (empty!)
– CLEAN FILTER DOOR (clean lint filter!)
– CLEAN FILTER BASE (clean lint filter!)
Before the first drying cycle
1
If the appliance was not transported in an upright position, leave it to
stand for 12 hours before connecting it to the electricity supply and using it for the first time, so that the oil can flow back to the compressor.
Otherwise the compressor could be damaged.
1. In order to remove any residues which may have been produced during
production, wipe the dryer drum with a damp cloth or carry out a brief
drying cycle (30 MIN) with damp cloths in the machine.
Sorting and preparing laundry
Sorting laundry
• Sorting by fabric type:
– Cotton/linen for programmes in the COTTON programme group.
– Mixed fibres and synthetics for programmes in the EASY CARES
programme group.
• Sorting by care label. The care labels mean:
n
m
l
k
Drying in
the tumble dryer
possible in principle
Dry at normal
temperature
Dry at
reduced temperature
Drying in the
tumble dryer
not possible
• Do not dry new, coloured textiles together with light-coloured laundry items. Textile colours may bleed.
• Do not dry cotton jersey and knitwear with the EXTRA DRY programme. Items may shrink!
• Wool and wool-like textiles can be dried using the WOOL programme.
Before the drying cycle spin the woollen textiles as well as possible
(max. 1200 rpm). Only dry woollen textiles together which are similar
or the same with repect to material, colour and weight. Please dry
heavy laundry items made of wool separately.
Preparing laundry
• To avoid laundry becoming tangled: close zips, button up duvet covers and tie loose ties or ribbons (e.g. of aprons).
• Empty pockets. Remove metal items (paper clips, safety pins, etc).
• Turn items with double-layered fabrics inside out (e.g. with cottonlined anoraks, the cotton layer should be outermost). These fabrics
will then dry better.
9
Programme overview
max. load
(weight when dry)
INTENSITY
LONG ANTICREASE
SIGNAL
Additional
functions
EXTRA DRY
6kg
•
•
•
Thorough drying of thick or multilayered fabrics, e.g. terry towelling
items, bathrobes.
mn
INTENSIVE
DRY
6kg
•
•
•
Thorough drying of thick fabrics,
e.g. terry towelling items, towels.
mn
STORAGE
DRY
6kg
•
•
•
Thorough drying of fabrics of even
thicknesses, e.g. terry towelling
items, knitwear, towels.
mn
DAMP
6kg
•
•
•
For thin fabrics which are also to
be ironed, e.g. knitwear, cotton
shirts.
mn
HAND
IRON
6kg
•
•
•
For normal thickness cotton or
linen laundry, e.g. bedding, table
linen.
mn
MACHINE
IRON
6kg
•
•
•
For cotton or linen laundry which
is also to be machine pressed, e.g.
bedding, table linen.
mn
EXTRA DRY
3kg
•
•
•
Thorough drying of thick or multilayered fabrics, e.g. pullovers, bedding, table linen.
mln
mln
mln
EASY CARES
COTTONS
Programmes
10
Application/properties
STORAGE
DRY
3kg
•
•
•
For thin fabrics which are not
ironed, e.g. easy care shirts, table
linen, baby clothes, socks, lingerie
with bones or wires.
DAMP
3kg
•
•
•
For thin fabrics which are also to
be ironed, e.g. knitwear, cotton
shirts.
Care
symbols
LEISURE
EASY IRON
LONG ANTICREASE
SIGNAL
30 MIN
INTENSITY
Programmes
max. load
(weight when dry)
Additional
functions
1kg
-
•
•
6kg
1kg
•
-
•
•
Application/properties
For further drying of individual items of
laundry or for small volumes of less than
1kg.
ml
n
mn
•
Special programme for leisure clothing,
such as jeans, sweatshirts, etc., of different material thicknesses (e.g. at the neck,
cuffs and seams).
ml
n
•
Special programme with anti-crease
mechanism for easy care fabrics such
shirts and blouses; for minimum ironing
effort. The result depends on the type of
fabric and its finish. (The load corresponds to approx. 5 to 7 shirts.)
Recommendation: Place fabrics in the
dryer straight after spinning. Once dried,
immediately remove fabrics and place on
a clothes hanger.
WOOL
1kg
•
-
•
Special programme, for drying woollen
fabrics after they have been washed, using warm air at minimum mechanical
load (Follow section “Sorting and preparing washing”). Recommendation: Remove
fabrics immediately after drying, as no
anti-crease programme follows.
SILK
1kg
•
•
•
Special programme for drying silk using
warm air and gentle movement.
•
Special programme, lasting around 35
minutes, for refreshing or gently cleaning
textiles with commercially available dry
cleaning products.
(Only use those products which are declared as suitable for the dryer by the
manufacturer; please observe the manufacturer’s instructions for use.)
REFRESH
1kg
-
-
Care
symbols
11
Drying
Switching machine on / switching light on
Turn the programme selector to any programme or turn it to LIGHT. The
machine has been switched on. When the door is opened, the drum is
illuminated.
Opening loading door / loading laundry
1. Open loading door:
Push against the loading door (push point
)
2. Load your laundry (do not force it in/overload the machine).
1
Caution! Be careful not to trap laundry in between the loading door
and rubber seal.
3. Close loading door securely. Lock must audibly lock.
Selecting the programme
Use the programme selector to set
the programme you require.
The probable programme run time
is displayed (in minutes) on the
multi-display.
With the programme knob position
WOOL/SILK, the desired
programme can be selected with
the WOOL or SILK buttons. If no
button is pressed, the WOOL
programme is automatically set.
12
Selecting additional functions
INTENSITY
For precise setting of the residual
moisture content of the laundry,
the degrees of dryness +, ++ or
+++ can be set in addition to most
programmes. Laundry becomes drier from + to +++.
1. Press the INTENSITY button repeatedly until the light for the residual
moisture required is lit.
In the programmes WOOL or SILK further drying can also be set by restarting the programmes with the residual moisture levels +, ++ or +++
set in addition, as required. In the case of a drying cycle with relatively
dry laundry, the length of the programme cycle displayed at the beginning is corrected after a while.
Important: Do not over dry wool or silk.
If required, press the LONG ANTICREASE or SIGNAL buttons.
LONG ANTICREASE
If this additional function is selected, the anti-crease phase at the end
of the drying cycle is lengthened by 60 minutes. The laundry can be removed at any time during the anti-crease phase.
SIGNAL
When the drying cycle has finished, an intermittent acoustic signal will
sound.
13
Setting time delay
3
3
3
With the DELAY TIMER button, you can delay the start of a programme
by between 30 minutes (30' and a maximum of 23 hours (23h).
1. Select the programme
2. Press the DELAY TIMER button as many times as necessary until the required start delay appears on the multi display, e.g. 12h if the programme is to be started in 12 hours. The DELAY TIMER display is
illuminated.
If 23h is displayed and you press the button again, the time delay will
be cancelled. The display will show 0' and then the duration of the selected programme.
3. To activate the delay timer, press the START/PAUSE button. The amount
of time remaining until the programme is set to start is continuously
displayed (e.g. 12h, 11h, 10h, … 30' etc).
Until the start of the programme the drum is moved at longish intervals
to loosen the laundry.
Starting the programme
Press the START/PAUSE button. The programme is started.
The programme progress display and the display showing the level of
dryness show drying progress.
Changing programme
3
14
To change a programme which has been selected by mistake once the
programme has started, first turn the programme selector to OFF and
then reset the programme.
The programme can no longer be changed directly once the programme
has started. If nevertheless there is an attempt to change the programme on the programme knob, the programme progress display and
the maintenance indicators flash. If an option button (excluding the
SIGNAL button) is pressed, Err appears in the multidisplay. The drying
programme is not however affected by this (laundry protection).
Removing laundry or loading laundry when necessary
1. Open loading door
1
Warning! Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close the door securely. Lock must audibly lock.
4. Press the START/PAUSE button to continue the drying cycle.
Drying cycle complete / removing laundry
3
Once the drying cycle is complete, the END and CREASE GUARD indicators light up. If the SIGNAL button has been pressed, an acoustic signal
sounds intermittently.
The drying cycles (except for the WOOL programme) are automatically
followed by an anti-crease phase which lasts around 30 minutes. The
drum rotates at intervals during this phase. This keeps the laundry loose
and free of creases. The laundry can be removed at any time during the
anti-crease phase. (The laundry should be taken out towards the end of
the anti-crease phase at the latest to prevent creases from forming.) If
LONG ANTICREASE has been selected, the anti-crease phase is lengthened by 60 minutes.
1. Open door.
2. Before removing the laundry, remove fluff from the micro-fine filter. It
is best to use a damp hand for this purpose. (See “Cleaning and maintenance” section.)
3. Remove laundry.
4. Turn the programme selector to OFF.
Important: After each drying cycle
– Clean the micro-fine filter and fine filter
– Drain the condensed water container
(See section “Cleaning and maintenance”.)
5. Close door.
15
Cleaning and maintenance
Cleaning lint filter
1
To ensure that the dryer works efficiently, the lint filters (micro-fine filter and fine strainer) must be cleaned after every drying cycle.
Caution! Never operate the dryer without fluff filters or with damaged
or blocked fluff filters.
1. Open door
2. Use a damp hand to clean the micro-fine filter, which is built into
the lower part of the loading aperture.
3. Push down unlock button on large
mesh filter.
Large mesh filter elevates.
4. Take out fine strainer.
5. Remove fluff from fine strainer. It
is best to use a damp hand for this
purpose.
16
3
Clean the entire filter area
The strainer area does not have to be cleaned after every drying cycle,
but should be checked regularly and cleaned of fluff if necessary.
6. To do this, grip the top of the large
mesh filter and pull it forwards until it comes loose from the two
brackets.
7. Remove fluff from the entire filter
area. It is best to use a vacuum
cleaner for this purpose.
8. Press both lugs of the large mesh
filter into the brackets on the loading door until they snap into place.
9. Re-insert fine strainer.
10. Press against the large mesh filter
until it locks into the interlock.
3
If the fine strainer is not fitted, the
large mesh filter will not snap into
place and the door cannot be
closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cycle has finished.
Emptying the water reservoir
1
Empty water reservoir after every drying cycle.
If the water reservoir is full, an active programme will be interrupted
automatically and the EMPTY WATER display will light up. In order to
continue the programme, the water reservoir must be emptied.
Warning! The condensed water is not suitable for drinking or for preparing foodstuffs.
17
1. Take out drawer containing water
reservoir completely (1) and pull up
the water reservoir’s drainage pipe
as far as it will go (2).
3
2. Pour condensed water out into a
sink or other suitable container.
3. Slide outlet connections in and refit water reservoir.
If the programme has been interrupted as a result of the water reservoir being full:
Press the START/PAUSE button to
continue the drying cycle.
3
The water reservoir has a volume of approx. 4 litres. This is sufficient for
around 6kg of laundry which has previously been spun at 800 revolutions/minute.
The condensed water can be used as distilled water, e.g. for steam ironing. However first filter it (e.g. with a coffee filter) to remove any residue and small pieces of fluff.
Cleaning the fluff filter
3
1
18
If the indicator CLEAN FILTER BASE lights up, the fluff filter in the
plinth of the appliance must be cleaned.
To protect the heat pump from dirt, the dryer is fitted with a special filter mat, which is located in the filter housing. Here too large amounts
of fluff build up over time, which affect the function of the appliance.
• Check the filter mat regularly.
• Clean the filter mat after about every 20th drying cycle or every second month at the latest.
Important
• Operating when the fluff filter is clogged with fluff can damage the
dryer. This also increases energy consumption.
• Never operate the dryer without the fluff filters.
• Do not use the dryer without the filter mat. A dirty heat pump requires more energy and can only be cleaned up by means of a costly
process.
1. Open door.
2. Open door in plinth: To do this,
press the release button on the
bottom of the door aperture and
open the door in the plinth to the
left.
3. Pull filter housing out of the base
by the handle.
4. Clean the inside of the door, the
fluff filter chamber and the rubber
seals of fluff.
5. Remove fluff from the fluff filter
on the floor of the base with a
damp hand.
6. To clean the filter mat:
Remove the holder from the filter
housing. To do this press the pressure points on the sides and pull
the holder up out of the housing.
7. Pull the filter mat and its frame up
out of the filter housing.
8. Take the filter mat out of the frame
and wash it by hand or use a vacuum cleaner, when it is has dried
out. Fluff, which has become stuck
in the filter mat and has not been
removed by washing, does not affect the function.
19
9. Insert the filter mat in the frame
and then insert with the frame into
the filter housing.
1
Important: The filter mat must engage tightly with the frame. Check
that the mat is sitting snuggly in
the frame, especially after inserting
it into the filter housing.
10. Insert holder into the filter housing.
11. As necessary, approx. once every 6
months, remove the fluff from the
heat exchanger using the sponge
supplied. When doing this, please
use rubber gloves.
Tip: The fluff can be removed more
easily if it is first dampened e. g.
with a laundry dampener.
12. Re-insert filter housing with holder
and filter mat in the base of the appliance.
Note: If the holder and filter mat are not inserted in the filter housing,
the filter housing cannot be pushed into the base of the appliance.
13. Close door in plinth.
3
The indicator CLEAN FILTER BASE only goes out when the programme
knob has been positioned to OFF.
Cleaning the drum
1
3
Caution! Do not use abrasives or steel wool to clean the drum.
Lime in the water or cleaning agents may form a barely visible lining on
the inside of the drum. The degree to which the laundry has been dried
is then no longer detected reliably. The laundry is damper than expected when removed from the dryer.
Use a damp cloth, which has been soaked in water and a little vinegar,
to wipe the inside of the drum and drum ribs.
Clean operating screen and housing
1
20
Caution! Do not use furniture cleaners or aggressive cleaning agents to
clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if …
Troubleshooting by yourself
If, during operation, the error code (E plus number or letter) appears on
the multi-display: Switch the machine off and on again. Reset programme. Press the START/PAUSE button
If the error is still displayed, please inform your local Service Force Centre and quote the error code.
Problem
Possible cause
Remedy
Mains plug is not plugged in Plug in at mains socket. Check
or fuse is not working cor- fuse in fuse box (domestic inrectly.
stallation).
Dryer does not work.
Loading door is open.
Close loading door.
Have you pressed the START/ Press the START/PAUSE button
PAUSE button?
again.
Select a different programme
the next time you dry (see
Wrong programme selected.
“Overview of programmes”
section).
Drying results unsatisfactory.
Lint filters clogged.
Clean lint filters.
Fluff filter clogged.
Clean fluff filter.
Overloading of laundry.
Observe recommended loading volumes.
Ventilation slots in base area Uncover ventilation slots in
covered up.
base area.
Residue on inside surface of Clean inside surface of drum
drum or drum ribs.
and drum ribs.
Make an adjustment using the
INTENSITY function (see chapter ”Drying, Selecting additional functions”).
Fine strainer not in place
Install fine strainer and/or
Loading door does not
and/or large mesh filter not snap large mesh filter into
close.
locked in place.
place.
When a button is
pressed, Err appears
in the multi-display.
Drum light does not
work.
Washing protection. After the
Turn the programme knob to
start of the programme, the
OFF. Set the programme again.
option can no longer be set.
Programme selector in OFF
position.
Turn programme selector to
LIGHT or to any programme.
Defective light bulb.
Replace light bulb (see next
section).
21
Problem
Possible cause
Remedy
PROGRAMME TIME
display changes erratically or stays unchanged for a long
time.
Programme time is corrected automatically depending
Automatic process; this is not
on type and volume of
a machine fault.
laundry and level of dampness.
Programme inactive,
EMPTY WATER display
illuminated.
Condensate tank is full.
Drying cycle ends
shortly after programme starts. END
display illuminated.
Select time programme or
Not enough washing loadhigher drying level (e.g. INTENed or washing loaded is too
SIVE DRY instead of STORAGE
dry for selected programme.
DRY).
Drying cycle lasts an
unusually long time.
Note:
After around 5 hours
the drying cycle ends
automatically (see
„Drying cycle complete“).
Lint filter clogged.
Clean lint filter.
Fluff filter clogged.
Clean fluff filter.
Load volume too big.
Reduce load volume.
Laundry insufficiently spun.
Laundry must be adequately
spun.
Empty condensate tank, then
start programme with START/
PAUSE button.
Changing the bulb for interior lighting
Only use a special bulb which is designed specially for dryers. The special bulb can be obtained from the Customer Care Department, ET no.
112 552 000-5.
3
1
1
Important: When the appliance is switched on, the interior lighting
switches itself off after 5 minutes when the door is open.
Warning: Do not use standard bulbs! These develop too much heat and
may damage the appliance.
Warning: Before replacing the bulb, disconnect the mains plug; with a
permanent connection: fully unscrew or deactivate the fuse.
1. Unscrew cover above the bulb (this can be found directly behind the
loading aperture, at the top; refer to “Description of machine” section.)
2. Replace defective bulb.
3. Screw cover back down.
1
22
Warning: For safety reasons, the cover must be screwed down tightly.
If this is not done, the dryer must not be operated.
Programming options
Objective
Implementation
1. Turn the programme selector to any programme.
Permanently programme 2. Press the SIGNAL button and hold down for approx. 5
in the audible signal
seconds.
which reminds you that
A brief signal sounds several times. The SIGNAL display
the programme is comflashes several times.
plete.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
Adjust “level of dryness”
detection:
If the laundry is slightly
drier or slightly damper
at the end of the programme than with the
standard setting.
1. Turn the programme selector to any programme.
2. Press the SILK and SIGNAL buttons at the same time and
hold down for approx. 5 seconds.
The current setting appears on the multi-display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting required
appears on the multi-display.
4. Turn the programme selector to OFF.
The setting is permanently programmed.
To deactivate the EMPTY
WATER display when using an external drain for
the condensed water.
1. Turn the programme selector to any programme.
2. Press the WOOL and LONG ANTICREASE buttons at the
same time and hold down for approx. 5 seconds. The
multi-display briefly displays ”0”
The EMPTY WATER display is permanently deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays ”1” (rather than
”0”).
23
Technical data
5
This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Height x width x depth
85 x 60 x 60 cm
Depth with loading door open
109 cm
Height can be adjusted by
1.5 cm
Weight when empty
approx. 60kg
Loading volume (depends on programme) 1)
max. 6kg
Energy consumption in accordance with IEC 1121 s. e.
(6kg of cotton, pre-drained at 1000 rpm,
2,1 kWh
COTTONS STORAGE DRY programme)
Use
Domestic
permissible ambient temperature
+ 5°C to + 35°C
1) Different loading volume data may be needed in some countries as a result of different measuring methods.
Consumption values
The consumption values have been established under standard conditions. They may deviate when the machine is operated in domestic circumstances.
Programme
COTTONS STORAGE DRY 1)
COTTONS HAND IRON
1)
EASY CARES STORAGE DRY
1) pre-drained at 1000 rpm
2) pre-drained at 1200 rpm
24
2)
Loading volume
in kg
Energy
consumption
in kWh
6
2,1
6
1,7
3
0,9
Installation and connection instructions
1 Installation safety instructions
• Before first starting up, all parts of the transport safety devices must
be removed. The machine may otherwise be damaged.
• Before using for the first time, ensure that the nominal voltage and
type of current specified on the machine rating plate match the
nominal voltage and type of current at the installation site. The electrical fuses required can also be found on the rating plate.
• Always connect the plug into a protection contact socket which has
been installed as specified.
• With permanent connections: A permanent connection may only be
established by an authorised specialist electrician.
• Do not install machine in rooms at risk of frost.
• Ensure that the door of the machine cannot be blocked by interior
doors of the house or the doors of other appliances.
• Do not install on deep pile carpets. Air circulation will be hindered at
the ventilation slots.
• Ensure that the machine is not placed on its mains cable.
• The tumble dryer must be level when installed.
• Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
Transporting the appliance
1
Important: Only tip the appliance
on its left side to transport (see illustration), if it cannot be transported in an upright position.
25
Removing transport safety packaging
1
Caution! Before first using all
parts of the transport packaging
must be removed.
1. Open loading door
2. Pull off adhesive strips from inside
machine on top of drum.
3. Remove foil hose and polystyrene
padding from the machine.
Electrical connection
1
26
Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
WARNING – THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should these safety measures
not be observed.
Before switching on, make sure the electricity supply voltage is the
same as that indicated on the appliance rating plate.
The appliance is supplied with a 13 amp plug fitted. In the event of
having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1363) fuse must be used.
The power supply cable must be accessible after installing the machine.
Should the plug need to be replaced
for any reason, proceed as described
below.
The wires in the mains lead are
coloured in accordance with the
following code:
1
Green and Yellow:
Earth
Blue:
Neutral
Brown:
Live
• The wire coloured green and yellow
must be connected to the terminal
marked with the letter “E“ or by the
earth symbol E or coloured green and yellow.
• The wire coloured blue must be connected to the terminal “N“ or
coloured black.
• The wire coloured brown must be connected to the terminal marked
“L“ or coloured red.
• Upon completion there must be no cut, or stray strands of wire
present and the cord clamp must be secure over the outer sheath.
WARNING! A cut off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut off plug is disposed of safely.
Permanent Connection
1
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any
point.
This appliance complies with the requirements laid out in the EEC Directive 76/899.
Voltage 240 V AC: Fuse rating 13amps
See rating plate for further information.
This appliance meets VDE requirements.
Particular regulations of local electricity authorities must be observed.
This appliance conforms to EEC Directive No. 82/499/EWG on radio interference.
WARNING! Repairs to electrical appliances must only be carried out by
trained personnel. Improper repairs may lead to serious risks for the user.
27
Door reversal instructions
1
Warning! The door may only be reversed by a specialist.
If necessary, please contact your local Service Force Centre.
Warning! Before reversing the door, disconnect the mains plug; with a
permanent connection: remove the fuse.
1. Open door.
2. Unscrew hinge A from the front of
the machine and take off the door.
3. Carefully pry off cover plates B and
C. To do this, insert a thin screwdriver into the slots as shown in the
illustration, press downwards
slightly and pry out the cover
plates.
4. Unfasten locking block D from the
snap-on fixture, take out and reinsert on the other side, having rotated the block through 180°.
5. Unscrew hinge A from the door, rotate through 180°, reinsert on the
opposite side and screw down.
6. Reinsert cover plates B and C on
the opposite site having first rotated them through 180°.
7. Unscrew cover plates E from the
front of the machine, rotate
through 180, screw on the opposite
side.
8. Unscrew door lock F, push down
slightly and remove from the front
of the machine.
9. Press snap-in button G in and down,
press cover down slightly and remove from front of the machine.
10. Transfer door lock F to the oppositeside and screw down.
11. Fix cover G on to the other side and
allow the snap-in button to lock in
place.
28
12. Insert door and hinges into recesses on the front of the machine and
screw down.
Note regarding contact protection: The machine is only secure for
operations again once all plastic parts have been inserted.
Special accessories
The following special accessories are available from your Service Force
Centre or your specialist dealer:
Intermediate installation kits for stacked washer and
dryer:
These intermediate installation kits can be used to arrange the dryer
and an automatic AEG-Electrolux washing machine (60cm wide, front
loading) as a space-saving washer/dryer stack. The automatic washing
machine is at the bottom and the dryer is at the top.
Version to be supplied:
– with extractable stacker plate
916.018 903
Installation kit for external condensate drain
Installation kit (125 122 510) for direct draining of condensate into a
basin, siphon, gully, etc. The condensate tank then no longer has to be
drained, it must however remain in its intended position in the machine. Refer to the “Programme options” section for how to deactivate
the EMPTY WATER display.
Max. displacement height: 1m from the base of the dryer; max. displacement length: 3m
29
Warranty conditions
Great Britain
Standard guarantee conditions
We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or
any part thereof is proved to be defective by reason only of faulty workmanship or materials, we
will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage
on condition that:
• The appliance has been correctly installed and used only on the electricity or gas supply stated
on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the
manufacturer's operating and maintenance instructions.
• The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any
person not authorised by us.
• All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company's property.
• This guarantee is in addition to your statutory and other legal rights.
• Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available
outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject
to rental agreements.
• Products of AEG manufacture which are not marketed by AEG.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to
your new home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in
the new country of use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within the European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.
• The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your
move and able to look after you and your appliances.
France
Germany
Italy
Sweden
UK
30
Senlis
Nürnberg
Pordenone
Stockholm
Luton
+33 (0) 3 44 62 29 29
+49 (0) 800 234 7378
+39 (0) 800 117511
+46 (0) 8 672 5360
+44 (0) 8705 350 350
Service and Spare Parts
If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning:
0870 5 929 929
Your telephone call will be automatically routed to the Service Force
Centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the website at
www. serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details
under the heading „What to do if...“
When you contact the Service Force Centre you will need to give the
following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model and serial number of the appliance (found on the rating
plate)
5. The purchase date.
Please note that a valid purchase receipt or guarantee documentation is
required for in-guarantee service
calls.
Customer Care
For general enquiries concerning
your AEG appliance, or for further
information on AEG products please
contact our Customer Care Department by letter or telephone at the
address below or visit our website at www.aeg.co.uk.
Customer Care Department For Customer Service in the Republic
of Ireland please contact us at the adMajor Appliances
dress below:
AEG Domestic Appliances
AEG/ Electrolux Group (Ire) Ltd
Addington Way
Long Mile Road/ Dublin 12
Luton
Republic of Ireland
Bedfordshire, LU4 9QQ
Tel: +353 (0) 1 4090754
Tel: 08705 350350 (*)
Email: service.eid@electrolux.ie
(*) Calls may be recorded for training purposes
31
From the Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg-electrolux.de
© Copyright by AEG
822
944 710-01-310805-01
125984510-01-080306-01
Subject to change without notice
Download PDF

advertising