Zanussi | ZCG660GNC | User manual | Zanussi ZCG660GNC, ZCG660GWC, ZCG660GXC User manual

EN
User manual
Cooker
ZCG660
GB
IE
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _
Product description _ _ _ _ _ _ _ _ _ _ _ _ _
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Hob - Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Hob - Helpful hints and tips _ _ _ _ _ _ _ _ _
Hob - Care and cleaning _ _ _ _ _ _ _ _ _ _
2
3
7
8
8
9
9
Oven - Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _
Oven - Clock functions _ _ _ _ _ _ _ _ _ _
Oven - Helpful hints and tips _ _ _ _ _ _ _
Oven - Care and cleaning _ _ _ _ _ _ _ _ _
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Environment concerns _ _ _ _ _ _ _ _ _ _ _
10
12
12
17
19
20
23
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always
keep the instructions with the appliance for future reference.
Children and vulnerable people safety
Warning! Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised by an adult or a person who is responsible for their safety.
• Do not let children play with the appliance. Children under 3
years must not be left unsupervised in the vicinity of the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot.
• If the appliance has a child safety device, we recommend that
you activate it.
• Cleaning and user maintenance shall not be made by children
without supervision.
General Safety
• The appliance and its accessible parts become hot during use.
Do not touch the heating elements.
2
www.zanussi.com
• Do not operate the appliance by means of an external timer or
separate remote-control system.
• Unattended cooking on a hob with fat or oil can be dangerous
and may result in fire.
• Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
• Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
• Remove any spillage from the lid before opening. Let the hob
surface cool down before closing the lid.
• Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
• If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in
order to avoid a hazard.
Safety instructions
Installation
Warning! Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied
with the appliance.
• Always be careful when you move the appliance because it is heavy. Always wear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other
appliances and units.
www.zanussi.com
• Make sure that the appliance is installed below and adjacent safe structures.
• The sides of the appliance must stay adjacent to appliances or to units with the same
height.
• Do not install the appliance on a platform.
• Do not install the appliance adjacent to a
door or under a window. This prevents hot
cookware to fall from the appliance when
the door or the window is opened.
Electrical connection
Warning! Risk of fire and electrical
shock.
3
• All electrical connections should be made
by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable. Contact
the Service or an electrician to change a
damaged mains cable.
• Do not let mains cables to come in touch
with the appliance door, specially when the
door is hot.
• The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
• If the mains socket is loose, do not connect
the mains plug.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips
and contactors.
• The electrical installation must have an isolation device which lets you disconnect the
appliance from the mains at all poles. The
isolation device must have a contact opening width of minimum 3 mm.
Gas connection
• All gas connections should be made by a
qualified person.
• Before installation, make sure that the local
distribution conditions (nature of the gas
and gas pressure) and the adjustment of the
appliance are compatible.
4
• Make sure that there is air circulation around
the appliance.
• The information about the gas supply is on
the rating plate.
• This appliance is not connected to a device,
which evacuates the products of combustion. Make sure to connect the appliance
according to current installation regulations.
Pay attention to requirements regarding adequate ventilation.
Use
Warning! Risk of injury, burns or electric
shock.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are
not blocked.
• Do not let the appliance stay unattended
during operation.
• Deactivate the appliance after each use.
• Internally the appliance becomes hot when
in operation. Do not touch the heating elements that are in the appliance. Always use
oven gloves to remove or put in oven accessories or ovenware.
• Be careful, when you open the appliance
door while the appliance is in operation. Hot
air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open door.
• Always keep the appliance door closed
when the appliance is in operation.
• Do not put cutlery or saucepan lids on the
cooking zones. They become hot.
• Set the cooking zone to “off” after use.
• Do not use the appliance as a work surface
or as a storage surface.
• Provide good ventilation in the room where
the appliance is installed.
www.zanussi.com
• Use only stable cookware with the correct
shape and diameter larger than the dimensions of the burners.
• Make sure the flame does not go out when
you quickly turn the knob from the maximum
to the minimum position.
• Make sure pots are centrally positioned on
the rings and do not stick out over edges of
the cooking surface.
• Use only the accessories supplied with the
appliance.
• Do not install a flame diffuser on the burner.
• This appliance is for cooking purposes only.
It must not be used for other purposes, for
example room heating.
•
•
•
•
•
Warning! Risk of fire or explosion.
• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook
with them.
• The vapours that very hot oil releases can
cause spontaneous combustion.
• Used oil, that can contain food remnants,
can cause fire at a lower temperature than
oil used for the first time.
• Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
• Do not let sparks or open flames to come in
contact with the appliance when you open
the door.
• Open the appliance door carefully. The use
of ingredients with alcohol can cause a mixture of alcohol and air.
Warning! Risk of damage to the
appliance.
• To prevent damage or discoloration to the
enamel:
– do not put ovenware or other objects in
the appliance directly on the bottom.
– do not put aluminium foil directly on the
bottom of the appliance.
– do not put water directly into the hot appliance.
www.zanussi.com
•
•
•
– do not keep moist dishes and food in the
appliance after you finish the cooking.
– be careful when you remove or install the
accessories.
Discoloration of the enamel has no effect on
the performance of the appliance. It is not a
defect in the sense of the warranty law.
Use a deep baking tray for moist cakes.
Fruit juices cause stains that can be permanent.
Do not keep hot cookware on the control
panel.
Do not let cookware to boil dry.
Be careful not to let objects or cookware fall
on the appliance. The surface can be damaged.
Do not activate the cooking zones with
empty cookware or without cookware.
Do not put aluminium foil on the appliance.
Cookware made of cast iron, aluminium or
with a damaged bottom can cause scratches on the glass ceramic. Always lift these
objects up when you have to move them on
the cooking surface.
Warning! This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room heating.
Gas Grill
Warning! Risk of fire and burns.
• Do not put the oven shelf with food on the
highest shelf level.
Lid
• Do not change the specification of the lid.
• Clean the lid regularly.
• Do not open the lid, when there are spills on
the surface.
• Before you close the lid turn all burners off.
• Do not close the lid until the hob and oven
are completely cold.
• Glass lids can shatter, when heated (if applicable).
5
• If you use an oven spray, obey the safety instructions on the packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of detergent.
• Do not clean the burners in the dishwasher.
Care and Cleaning
Warning! Risk of injury, fire or damage to
the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
• Make sure the appliance is cold. There is
the risk that the glass panels can break.
• Replace immediately the door glass panels
when they are damaged. Contact the Service.
• Be careful when you remove the door from
the appliance. The door is heavy!
• Clean regularly the appliance to prevent the
deterioration of the surface material.
• Remaining fat or food in the appliance can
cause fire.
• Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.
6
Internal light
• The type of light bulb or halogen lamp used
for this appliance, is only for household appliances. Do not use it for house lighting.
Warning! Risk of electrical shock.
• Before replacing the lamp, disconnect the
appliance from the power supply.
• Only use lamps with the same specifications.
Service
• Contact the Service to repair the appliance.
We recommend only the use of original
spare parts.
Disposal
Warning! Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children
and pets to get closed in the appliance.
www.zanussi.com
Product description
General overview
3
2
1
6
3 Grill
4 Oven lamp
5 Shelf positions of the main oven
6 Shelf positions of the top oven
5
4
3
2
1
5
1 Control panel and hob
2 Air vents for cooling fan
1
2
3
4
Cooking surface layout
1
2
5
1 Steam outlet
2 Semi-rapid burner
3 Auxiliary burner
4 Rapid burner
4
3
5 Semi-rapid burner
Control panel
1
2
3
4
1
1 Knobs for the hob
2 Knob for the main oven
3 Electronic programmer
4 Knob for the top oven / Grill
Accessories
• Oven shelf
www.zanussi.com
For cookware, cake tins, roasts.
• Deep roasting pan
7
To bake and roast or as pan to collect fat.
• The roasting pan grid
To put in the deep roasting pan.
Before first use
Warning! Refer to the Safety chapters.
Initial Cleaning
• Remove all accessories and removable shelf
supports (if applicable).
• Clean the appliance before first use.
Important! Refer to the chapter "Care and
cleaning".
Setting the time
You must set the time before you operate
the oven.
When you connect the appliance to the electrical supply or after a power cut, the indicator
for the Time of Day function flashes.
Press the + or - button to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day
you set.
To change the time, press
again and
again until the indicator for the Time of
Day function flashes.
Preheating
Set an oven to maximum temperature and run
an empty oven for 1 hour, to burn off any residue from the cavity surface. Accessories can
become hotter than in normal use. During this
period an odour can be emitted. This is normal. Make sure the room is well ventilated.
Preheat the two ovens. Heat up one oven at a
time.
Hob - Daily use
Warning! Refer to the Safety chapters.
1
Lighting the burners
Warning! Be very careful when you use
open fire in a kitchen environment. The
manufacturer declines all responsibility in case
of misuse of the flame.
9
Always light the burner before you put
cookware on it.
6
1.
2.
3.
Turn the knob to the maximum position
and push it down. When you push the
knob, the spark generator activates automatically.
Keep the control knob pushed for approximately 5 seconds. This lets the thermocouple warm up. If not, the gas supply is
interrupted.
Adjust the flame after it is regular.
If after some tries the burner does not
light, check if the crown and its cap are in
the correct positions.
8
7
2
3
4
5
1 Burner cap
2 Burner crown
3 Ignition candle
4 Thermocouple
5 Hob
6 Slots
7 Burner body
8 Location peg
9 Hole
8
www.zanussi.com
Replacing burner parts
1. Carefully put the burner crown on the
burner body. Do not use force.
a) Make sure that the hole in the crown
is above the ignition candle.
b) Make sure that the location pegs are
in the slots in the burner body.
c) Let the crown fall freely onto the
body.
d) Make sure that you can move the
crown a small distance from side to
side.
2. Put the burner cap centrally on top of the
crown (enamel side up). Move the cap
from side to side and front to back to
make sure that it is correctly installed.
3. Try to light the burner. If the burner does
not ignite, adjust the crown and cap again.
If the burner does not light after 15 seconds,
release the control knob, turn it into off
position and wait for at least 1 minute before
trying to light the burner again.
If the burner accidentally goes out, turn
the control knob to the off position and try
to light the burner again after minimum 1 minute.
The spark generator can start automatically when you switch on the mains, after
installation or a power cut. It is normal.
Turning the burner off
To put the flame out, turn the knob to the sym.
bol
Warning! Always turn the flame down or
switch it off before you remove the pans
from the burner.
Warning! Do not keep control knob
pressed for more than 15 seconds.
Hob - Helpful hints and tips
Warning! Refer to the Safety chapters.
Energy savings
• If possible, always put the lids on the pans.
• When the liquid starts to boil, turn down the
flame to barely simmer the liquid.
Use pots and pans with diameter applicable to the dimension of burner.
Burner
Diameters of cookware
Rapid
180 mm - 260 mm
Semi-rapid
120 mm - 220 mm
Auxiliary
80 mm - 160 mm
Use cookware with the bottom as thick and
flat as possible.
Hob - Care and cleaning
Warning! Refer to the Safety chapters.
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Switch the appliance off and
let it cool down before you clean it.
Warning! For safety reasons, do not
clean the appliance with steam cleaners
or high-pressure cleaners.
Warning! Do not use abrasive cleaners,
steel wool pads or acids, they can cause
damage to the appliance.
www.zanussi.com
• To clean the enamelled parts, cap and
crown, wash it with warm soapy water.
• Stainless steel parts wash with water, and
then dry with a soft cloth.
• The pan supports are not dishwasher
proof; they must be washed by hand.
• Make sure you position the pan supports
correctly after cleaning.
• To make burners work correctly, make sure
that the arms of the pan supports are in the
centre of the burner.
9
• Be very careful when you replace the
pan supports to prevent the hob top
from damage.
After cleaning, dry the appliance with a soft
cloth.
Oven - Daily use
Warning! Refer to the Safety chapters.
Cooling fan
When the appliance operates, the cooling fan
activates automatically to keep the surfaces of
the appliance cool. If you deactivate the appliance, the cooling fan continues to operate until the temperature in the appliance cools
down.
If there is a fault in the cooling fan, contact the customer service.
Switching the top oven, top oven grill or
the main oven on and off
Ignition of top and main oven gas burner:
Push the gas oven control knob and turn it to
. Keep it pushed for some seconds, but no
more than 15 seconds. Do not release it until
the flame comes on.
Ignition of top oven grill burner:
Push the gas oven control knob and turn it to
. Keep it pushed for some seconds, but
no more than 15 seconds. Do not release it
until the flame comes on.
If the top oven gas burner or grill burner
does not come on or if it accidentally
goes out:
1. Release the gas oven control knob and
turn it to the “ Off“ position.
2. Open the oven door.
3.
After one minute, try to light the oven gas
burner again.
You cannot operate the top oven, when
the grill is in use.
After ignition:
1. Release the gas oven control knob.
2. Close the oven door.
3. Turn the gas oven control knob to the
necessary temperature setting.
Ovens safety device:
The top and main oven has a thermocouple. It
stops the gas flow, if the flame goes out.
Turning off the oven burner
To put out the flame, turn the knob to the off
position.
Turning off the grill burner
To put out the flame, turn the knob to the off
position.
Automatic ignition
Sometimes when the appliance is in operation
you can hear noises, these are normal and do
not refer to any defects.
The top oven and the main oven have an
automatic ignition system which ignites again
the burner if the flame accidentally goes out.
If the gas supply is cut out the automatic
ignition will continue to ignites the burner. Turn
the gas oven control knob to the off position.
Top Oven Functions
Oven function
Off position
Gas mark 1 - 8
10
Range of temperature
adjustment
Application
The appliance is off.
Range of temperature adjustment for conventional cooking.
To set the temperature, turn the knob counterclockwise.
www.zanussi.com
Oven function
Application
To grill flat food in the middle of the shelf. To make toast. To
activate the grill, turn the knob clockwise.
Grill
Main Oven Functions
The oven has these functions:
Oven function
Off position
Gas mark 1 - 9
Range of temperature adjustment
Ignition
Minimum temperature
Application
The appliance is off.
Range of temperature adjustment for conventional cooking.
To activate the oven.
To set the minimum temperature.
Installing the oven accessories
Put the slide-in accessories between the
guide bars of one of the oven levels.
Important! The flame protection on the shelf
must point up.
Use the shelf with flame protection only
on the first and second level in the top
oven, and on all the levels in the main oven.
Grilling set
The grilling set includes the roasting pan grid
and the deep roasting pan. You can use the
roasting pan grid on the two sides.
Warning! Risk of burns when removing
the accessories from a hot oven.
www.zanussi.com
You can use the grilling set to roast larger
pieces of meat or
poultry on one level:
You can use the grilling set to grill flat
dishes in large quantities and to toast:
Put the roasting pan
grid inside the deep
roasting pan so that
the supports of the
oven shelf point upwards.
Put the roasting pan
grid inside the deep
roasting pan so that
the supports of the
oven shelf point
downwards.
Put the deep roasting pan in the oven at the
necessary level.
Only put the grilling set on the second or
third shelf level of top oven.
11
Oven - Clock functions
Electronic programmer
1
2
3
1 Minute minder indicator
2 Time display
3 Time of day indicator
4 Button +
5 Selection button
6 Button -
6
5
4
Clock function
Time of day
Minute Minder
Application
To set, change or check the time of day.
To set a countdown time. This function has no effect on the operation of
the oven.
Minute Minder function
This function has no effect on oven operations.
1.
Press the Selection button again and
again until the indicator for the minute
minder function flashes.
2. Set the time with + or - button (the maximum time is 2 hours 30 minutes).
3. After 5 seconds, the clock starts to count
down.
4.
When the set time ends, press a button to
stop the signal.
Cancelling the clock functions
1. Push the Selection button again and again
until necessary function indicator flashes.
2. Push and hold button "- ".
After some seconds the clock function
goes out.
Oven - Helpful hints and tips
Warning! Refer to the Safety chapters.
The temperature and baking times in the
tables are guidelines only. They depend
on the recipes, quality and quantity of the ingredients used.
Top oven
The top oven is the smaller of the two ovens. It
has 3 shelf levels. Use is to cook smaller
quantities of food. It gives especially good re12
sults when used to cook fruitcakes, sweets
and savoury flants or quiche.
Main oven
The main oven is particularly suitable for cooking larger quantities of food.
Baking
General instructions
• Your new oven may bake or roast differently
to the appliance you had before. Adapt your
www.zanussi.com
usual settings (temperature, cooking times)
and shelf levels to the values in the tables.
• With longer baking times, the oven can be
switched off about 10 minutes before the
end of baking time, to use the residual heat.
• Use deep roasting pan in middle or top shelf
level of top oven.
• To brown pastry dishes on the bottom, cook
on metal plate or put on a baking tray.
When you use frozen food, the trays in
the oven can twist during baking. When
the trays get cold again, the distortion
will be gone.
• If you cannot find the settings for a special
recipe, look for the one that is almost the
same.
• Baking time can be extended by 10-15 minutes, if you bake cakes on more than one
level.
• Cakes and pastries at different heights do
not always brown equally at first. If this occurs, do not change the temperature setting. The differences equalize during the
baking procedure.
How to use the Baking Tables
• We recommend to use the lower temperature the first time.
Tips on baking
Baking results
Possible cause
Remedy
The cake is not browned
sufficiently below
Incorrect oven level
Put the cake on a lower oven level
The cake sinks (becomes soggy, lumpy,
streaky)
Oven temperature too high
Use a lower setting
The cake sinks (becomes soggy, lumpy,
streaky)
Baking time is too short
Set a longer baking time
Do not set higher temperatures to decrease baking times
The cake sinks (becomes soggy, lumpy,
streaky)
Too much liquid in the mixture
Use less liquid. Look at the mixing times, specially when you use mixing machines
Cake is too dry
Oven temperature too low
Set a higher oven temperature
Cake is too dry
Baking time too long
Set a shorter baking time
Cake does not brown
equally
Oven temperature too high
and baking time too short
Set a lower oven temperature and a longer
baking time
Cake does not brown
equally
No equal mixture
Put the mixture equally on the baking tray
Cake does not cook in
the baking time set
Temperature too low
Use a slightly higher oven temperature setting
Top oven cooking chart
Food
Shelf position
Gas mark
Cooking Time (Total
Hours)
Biscuits
1-2
4
0:10 - 0:20
Small / Queen Cake
1-2
5
0:18 - 0:25
www.zanussi.com
13
Food
Shelf position
Gas mark
Cooking Time (Total
Hours)
Sponge
1-2
4
0:18 - 0:20
Victoria Sandwich
1-2
4
0:18 - 0:25
Gingerbread
1-2
2
1:15 - 1:30
Flapjack
1-2
5
0:25 - 0:30
Shortbread
1-2
3
0:45 - 1:05
Fruit Pies, Crumbles
1-2
6
0:40 - 0:50
Milk Puddings
1-2
3
1:30 - 2:00
Scones
1-2
7
0:08 - 0:12
Choux Pastry
1-2
6
0:30 - 0:35
Éclairs / Profiteroles
1-2
5
0:20 - 0:30
Flaky Pastry
1-2
6
0:25 - 0:40
Mince Pies
1-2
5
0:15 - 0:20
Pasta Lasagne etc.
1-2
5
0:40 - 0:45
Meat Pies
1-2
7
0:25 - 0:35
Quiche, Tarts, Flans
1-2
5
0:25 - 0:45
Shepherd’s Pie
1-2
7
0:30 - 0:40
Soufflés
1-2
5
0:20 - 0:30
Fish
1-2
4
0:20 - 0:30
Fish Pie
1-2
6
0:20 - 0:25
Beef Casserole
1-2
3
2:30 - 3:00
Lamb Casserole
1-2
4
2:30 - 3:00
Convenience Foods
Follow manufacturer’s instructions
Baked Potatoes
1-2
5
1:00 - 1:30
Roast Potatoes
1-2
6
1:00 - 1:30
Large Yorkshire Puddings
1-2
7
0:25 - 0:40
Individual Yorkshire Puddings
1-2
7
0:15 - 0:25
Shelf position
Gas mark
Cooking Time (Total
Hours)
Biscuits
1+4
4
0:10 - 0:20
Bread
2-3
81)
0:25 - 0:30
Bread rolls/buns
3-4
81)
0:15 - 0:20
Small / Queen Cake
1+4
5
0:18 - 0:25
Sponge
1+4
4
0:20 - 0:30
Main oven cooking chart
Food
14
www.zanussi.com
Food
Shelf position
Gas mark
Cooking Time (Total
Hours)
Victoria Sandwich
1+4
4
0:18 - 0:25
Madeira Cake
2-3
4
1:15 - 1:30
Rich Fruit Cake
2-3
2
2:15 - 2:30
Christmas Cake
2-3
2
3:00 - 4:30
Gingerbread
2-3
2
1:15 - 1:30
Flapjack
3
5
0:25 - 0:30
Shortbread
3
3
0:45 - 1:05
Fruit Pies, Crumbles
3
6
0:40 - 0:60
Milk Puddings
3
3
1:30 - 2:00
Scones
1+4
7
0:08 - 0:12
Choux Pastry
3
6
0:30 - 0:35
Éclairs / Profiteroles
3
5
0:20 - 0:30
Flaky Pastry
3
6
0:25 - 0:40
Mince Pies
1+4
5
0:15 - 0:20
Pasta Lasagne etc.
3
5
0:40 - 0:45
Meat Pies
3
2
0:25 - 0:35
Quiche, Tarts, Flans
3
2
0:25 - 0:45
Shepherd’s Pie
3
7
0:30 - 0:40
Soufflés
3
5
0:20 - 0:30
Fish
3
4
0:20 - 0:30
Fish Pie
3
6
0:20 - 0:25
Beef Casserole
2
3
2:30 - 3:00
Lamb Casserole
2
4
2:30 - 3:00
Convenience Foods
Follow manufacturer’s instructions
Baked Potatoes
3-4
5
1:00 - 1:30
Roast Potatoes
3-4
6
1:00 - 1:30
Large Yorkshire Puddings
3-4
7
0:25 - 0:40
Individual Yorkshire Puddings
3-4
7
0:15 - 0:25
1) When baking bread cook for 10 minutes at gas mark 8 then reduce to mark 6 for the remaining cook time.
Roasting
Roasting dishes
• Use heat-resistant ovenware to roast
(please read the instructions of the manufacturer).
www.zanussi.com
• Large roasting joints can be roasted directly
in the deep roasting pan or on the oven
shelf above the deep roasting pan. (If
present)
• Roast lean meats in a roasting tin with a lid.
This well keep the meat more succulent.
15
• All types of meat, that can be browned or
have crackling, can be roasted in the roasting tin without the lid.
• Use deep roasting pan in middle or top shelf
level of top oven and in two or higher level
of main oven.
• Make sure that the grilling set or
roasting pan is set in middle of shelf
between front and rear of the oven
cavity
Roasting chart
Shelf Level
Gas Mark
Cooking time
Beef/ Beef boned
Meat
2
5
20 - 35 minutes per 500g (1lb) and 20 - 35
minutes over
Mutton/Lamb
2
5
25 - 35 minutes per 500g (1lb) and 25 - 35
minutes over
Pork/Veal/Ham
2
5
30 - 40 minutes per 500g (1lb)
Chicken
2
5
15 - 20 minutes per 500g (1lb) and 20 minutes over
Turkey/Goose
2
5
15 - 20 minutes per 500g (1lb) up to 3500g
(7lb) then 10 minutes per 500g (1lb) over
3500g (7lb)
Duck
2
5
25 - 35 minutes per 500g (1lb) and 25 - 30
minutes over
Pheasant
2
5
35 - 40 minutes per 500g (1lb) and 35 - 40
minutes over
Rabbit
2
5
20 minutes per 500g (1lb) and 20 minutes
over
Grilling
Always use the grilling function with
maximum temperature setting
Warning!
• When grill operates, closing the door
automatically cut-off the flames.
• Do not use the door as a cut-off device.
• Always grill with the oven door opened.
• Keep minimum 5 cm distance from
front and rear edges of grilling area.
• Do not put a meal on edge of shelf.
• The grilling area is set in centre of the
shelf.
• Make sure that the grilling set or
roasting pan is set in middle of
shelf between front and rear of the
oven cavity
Caution! Accessible parts may be hot
when grill is in use. Young children
should be kept away.
Always pre-heat the empty oven with the
grill functions for 5 minutes.
• Set the shelf in the shelf level as recommended in the grilling table.
• When use grilling set in top oven, always remove the oven shelf.
• Grill only flat pieces of meat or fish.
Grilling chart
Food
Bacon Rashers
16
Shelf position
Grilling Time (Total Hours)
2-3
0:05 - 0:06
www.zanussi.com
Food
Shelf position
Grilling Time (Total Hours)
Beef Burgers (home-made)
2-3
0:20 - 0:30
Chicken Joints
2-3
0:30 - 0:40
Lamb Chops
2-3
0:15 - 0:20
Pork Chops
2-3
0:20 - 0:30
Whole Trout/Mackerel
2-3
0:15 - 0:25
Plaice/Cod Fillets
2-3
0:10 - 0:15
Kebabs
2-3
0:20 - 0:30
Kidneys – Lamb/Pig
2-3
0:08 - 0:12
Liver – Lamb/Pig
2-3
0:10 - 0:20
Sausages
2-3
0:20 - 0:30
Steak – Rare
2-3
0:06 - 0:12
Steak – Medium
2-3
0:12 - 0:16
Steak – Well Done
2-3
0:14 - 0:20
Toasted Sandwiches
2-3
0:01 - 0:03
Oven - Care and cleaning
Warning! Refer to the Safety chapters.
• Clean the front of the appliance with a soft
cloth with warm water and cleaning agent.
• To clean metal surfaces use a usual cleaning agent
• Clean the oven interior after each use. Thus
you can remove dirt more easily and it does
not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft cloth
with warm water and cleaning agent) after
each use and let them dry.
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It can
destroy nonstick coating!
Stainless steel or aluminium appliances:
Clean the oven door with a wet sponge only.
Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materials as they can damage the oven surface.
www.zanussi.com
Clean the oven control panel with the same
precautions
Catalytic walls
The walls with a catalytic coating are selfcleaning. They absorb fat which collects on
walls while the oven operates.
To support this self-cleaning process
heat the oven without any food regularly:
1. Open the oven door.
2. Remove all accessories from the oven.
3. Close the door.
4. Set the maximum oven temperature and
let the oven operate for 1 hour.
5. Clean the oven cavity with a soft and
damp sponge.
Caution! Do not attempt to clean
catalytic surfaces with oven sprays,
abrasive cleaners, soap or other cleaning
agents. This may damage the catalytic surface.
Discolouration of the catalytic surface has
no effect on catalytic properties.
17
Cleaning the top oven glass panels
A
The door glass on your product can be
different in type and shape from what you
see in diagrams. The number of glasses can
be different.
Removing the glass:
1. Open the door.
2. Push the door trim at both sides to release
the clips. Refer to the picture.
3. Remove the glass panels.
2
1
1
To replace the glass panels obey the procedure in opposite sequence. Before you
lower the trim attach the A trim part to the
door. Refer to picture.
2
1
To replace the glass obey the procedure
in opposite sequence.
Cleaning the oven door
The door glass on your product can be
different in type and shape from what you
see in diagrams. The number of glasses can
be different.
Removing the glass:
1. Push the door trim at one side to remove it.
Refer to the picture.
2. Pull up the trim.
3. Remove the glass panels.
Oven lamp
Warning! There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch
off the circuit breaker.
Put a cloth on the bottom of the oven for
protection of the oven light and glass
cover.
Replacing the oven lamp
1. You can find the lamp glass cover at the
back of the cavity.
Turn the lamp glass cover counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with an applicable
300 °C heat-resistant oven lamp.
Important! Use the same oven lamp type.
4.
18
Install the glass cover.
www.zanussi.com
What to do if…
Warning! Refer to the Safety chapters.
Problem
Possible cause
Remedy
The appliance does not operate.
The fuse in the fuse box is released.
Control the fuse. If the fuse is released more than one time, refer
to a qualified electrician.
The appliance does not operate.
The appliance is too hot.
Cool down the appliance for
some hours
The grill, burners, ovens and timer
do not work.
There is no electrical supply.
Make sure that the unit is connected and the electrical supply
is switched on.
The grill, burners, ovens and timer
do not work.
There is no electrical supply.
Examine the house electrical installation fuse.
The grill, burners, ovens and timer
do not work.
There is no gas supply.
Examine the house gas supply,
use other gas appliance (Central
heating or gas fires).
Only main oven does not work.
Time is not set.
Set the time
There is no spark when lighting
the gas.
Burner cap and crown are placed
uneven.
Make sure that the burner cap
and crown are in correct positions.
The flame is blow out immediately
after ignition.
Thermocouple is not heated sufficient.
After lightning the flame, keep the
knob pushed for approximately 5
seconds.
The gas ring burns unevenly.
Burner crown is blocked with
food residue.
Make sure that the injector is not
blocked and the burner crown is
clear of food particles or cleaning
fluids. Dry them with a cloth and
clean stubborn marks away with a
dry nylon brush (for example an
old toothbrush).
The oven does not heat up.
The oven is not switched on.
Switch on the oven.
The oven does not heat up.
The necessary settings are not
set.
Control the settings.
The oven does not cook evenly.
Check that the appliance is correctly installed and levelled, and
that you use the recommended
temperatures and shelf positions.
The oven lamp does not operate.
The oven lamp is defective.
Replace the oven lamp.
The display shows “12.00” and
"LED".
A power cut.
Reset the clock.
Steam and condensation settle
on the food and in the oven cavity.
You left the dish in the oven for
too long.
Do not leave the dishes in the
oven for longer than 15-20 minutes after the cooking process
ends.
www.zanussi.com
19
Problem
Possible cause
Remedy
The appliance makes noises or
popping sounds.
When the gas is drawn through
the burner, it can compress as
they heat up. Some metal parts of
the appliance expand and contract when they heat up or cool
down. The noises are normal.
The flame colour is orange or yellow.
The flame can look orange or yellow (flame disturbance) in some
areas of the burner because of
how the burner is made. This is
normal.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
Warning! Refer to the Safety chapters.
Technical data
basement, or aboard a boat, yacht or other
vessel.
For the minimal distances of fitting check the
table.
Dimensions
Height
894 - 912 mm
Width
595 mm
Depth
600 mm
Top oven capacity
34 l
Main oven capacity
79 l
Location of the appliance
You can fit your freestanding appliance with
cabinets on one or both sides and in the corner.
Do not install the appliance in a bed-sitting
room of volume less than 20 m³ or in a bathroom, shower room or garage.
D
A
E
F
C
B
Warning! Do not install the appliance
below ground level, for example in a
20
www.zanussi.com
Before you install stability chain, adjust the
appliance to the correct height.
Minimal distances
Dimension
mm
A
650
B
150
C
2
D
400
E
450
F
less than 400
Measure down 180 mm from the appliance
top surface, then measure right 30 mm (See
picture). Mark the position of the wall and this
gives anchor point for the stability chain.
180 mm
30 mm
Levelling
Use small feet on the bottom of appliance to
set same level of cooker top surface with other
surfaces
Warning! These instructions are only
valid in the countries whose symbols
appear on this booklet's cover.
Gas Category
I3+
Gas Supply
G30/31 (3+) –
28-30/37 mbar
The stability chain
Caution! You must install the stability
chain. If you do not install it the appliance
can tilt.
Gas burners
BURNER
NORMAL POWER
LPG
kW
inj. 100/mm
Auxiliary burner
1,0
50
71,8
Semi-rapid burner
2,0
71
136,5
Rapid burner
3,0
88
244,12
Grill
2,7
95
194
Top Oven
1,9
70
136,5
Main Oven
1,9
70
136,5
Gas Connection
Use a flexible pipe in compliance with the regulation in force. Be careful they do not come in
touch with mobile parts or they are not
squeezed.
www.zanussi.com
g/h
Warning! Only a qualified and
competent person must do the gas
installation.
21
Warning! Before gas connection
disconnect the mains plug from the
mains socket or switch off the fuse in
the fuse box. Close the primary valve of
the gas supply.
Supply piping should not be less than
R3/8. Connection is made to the Rc ½
(1/2 “ B.S.P.) female threaded. Entry pipe located just below the hob level on the rear left
hand side of the appliance.
The gas supply ramp is on the rear side of the
appliance.
Warning! Only liquid sealants to be used
when inlet gas pipe is fitted i.e.: do not
use P.T.F.E. sealant tape.
When installation is complete. Carry out a gas
tightness test and make sure that the seal of
each pipe fitting is correct.
Important! Use flexible tubing, which comply
with BS.669 current edition.
A
E
D
B
C
C
Warning! The gas bayonet must be in
mark area.
22
Dimension
mm
A
250
B
680
C
50
D
250
Dimension
mm
E
580
Pressure test
The Rapid injector is used as a pressure test
point.
1. Connect the pressure gauge to the Rapid
injector.
2. Examine the supply pressure by turning the
Rapid burner and one other burner fully on,
and lighting them. The pressure must be:
a) 20 mbar for Natural Gas
b) 29 mbar for LPG, butane only
c) 37 mbar for LPG, propane only.
3. Turn the taps off and disconnect the pressure gauge.
4. Make sure that all burners work correctly.
Checking the grill
1. Put in the grill pan containing the grid.
2. Light the grill burner by turning the grill
.
control knob to the symbol
3. Release the knob when the burner comes
on.
Checking the hob burners
1. Lift the lid.
2. Put in the burner crowns and caps. Make
sure that they are correctly seated.
3. Put in the pan supports.
4. Check each of the burners in turn by turning the burner control knob to the symbol
.
5. Release the knob when the burners come
on.
Checking the oven burners
1. Push the gas oven control knob and turn it
position.
to
2. Keep it pushed until the oven burners
come on (about 10 seconds).
3. Set the flame.
4. Turn the control knob off and check that
the oven flames go out.
www.zanussi.com
Electrical installation
The manufacturer is not responsible if you
do not follow the safety precautions from
the chapter "Safety information".
MANUFACTURER:
ELECTROLUX POLAND Sp.z o.o..
ul.Kazimierza Odnowiciela 28
58-100 Świdnica - POLAND
This appliance is supplied with a main plug
and a main cable.
Connect the phases correctly, if you do
not connect, spark generator will work all
the time.
Environment concerns
Recycle the materials with the symbol . Put
the packaging in applicable containers to
recycle it.
Help protect the environment and human
health and to recycle waste of electrical and
electronic appliances. Do not dispose
appliances marked with the symbol with the
household waste. Return the product to your
local recycling facility or contact your
municipal office.
www.zanussi.com
Packaging material
The packaging material is environmentally-friendly and recyclable. Plastic parts are
marked with international abbreviations such
as PE, PS, etc. Dispose of the packaging material in the containers provided for this purpose at your local waste management facility.
23
892957662-B-472013
www.zanussi.com/shop

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project