Aeg LAVEUROLINES User Manual

Add to My manuals
56 Pages

advertisement

Aeg LAVEUROLINES User Manual | Manualzz
ÖKO-LAVAMAT euroline S
update
The Environmentally-Friendly Washing
Machine
User Information
Dear customer,
Please read this user information carefully.
In particular, pay attention to the section ”Safety” on the first pages.
Keep this user information in a safe place for later reference. Pass it on
to any subsequent owners of the unit.
1
Points which are necessary for your safety or which are important for
the unit's functional capability are highlighted by a warning triangle
and/or signal words (Warning!, Caution!, Attention!). Always remember.
0 1. This symbol guides you step by step in operating the unit.
2. ...
3
After this symbol you will find detailed information on operation and
practical use of the unit.
2
The clover leaf indicates tips and information on the economical and
environmentally-responsible use of the unit.
This user information contains information on remedying any faults
which may occur, see the section ”What to do if ...”.
If these instructions are not sufficient, our After-Sales Service is at your
disposal at any time:
ELGROEP & AEG SERVICE
Bergensesteenweg 719
1502 Lembeek
Tel.: 02/3630444
Here you will receive an answer to any question concerning the features and use of your unit. Of course, we are also pleased to receive any
requests, suggestions and criticism. Our aim is to further improve our
products and services for the benefit of our customers.
In the event of technical problems, our factory customer service in your
area is at your disposal at all times. Also refer to the section ”Service”.
Printed on recycled paper.
Those who think ecologically act ecologically ...
2
Contents
Instructions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Environment Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Unit Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Drawer for Washing Powder and Care Agent . . . . . . . . . . . . . . . . . . . . . . . 9
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Program Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Additional Program Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Consumption Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
What Does ”Update” Mean? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Before the First Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Prepare the Washing Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sort and Prepare the Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing Types and Care Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing Detergents and Care Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Which washing detergent and care agent? . . . . . . . . . . . . . . . . . . . . . .
How much washing detergent and care agent? . . . . . . . . . . . . . . . . . . .
Water Softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
15
16
17
17
17
17
Run a Washing Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brief Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the spin speed/Selecting the rinse hold function . . . . . . . . . . . .
Opening and Closing the Filling Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Add the Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Add Washing Detergent/Care Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Start the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Completion of the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing a Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing Cycle Ended/Remove Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
18
19
20
21
21
22
23
23
24
25
3
Program Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Separate Conditioning/Starching/Impregnating . . . . . . . . . . . . . . . . . . . .
Separate Rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Separate Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
26
28
28
28
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing Detergent Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filling Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the drain pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
29
29
30
30
30
What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remedying Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the washing result is not satisfactory . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carry Out an Emergency Emptying Operation . . . . . . . . . . . . . . . . . . . . . . .
Additional Rinse (RINSE+/SPOELEN+/RINCAGE+) . . . . . . . . . . . . . . . . . . . .
32
32
36
37
38
Child Safety Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Setting up and connection instructions
. . . . . . . . . . . . . . . . . 40
Safety Instructions for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Setting Up the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transporting the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remove the Transport Safeguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Prepare the Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Up on a Concrete Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Up on a Vibrating floor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compensate for Floor Unevenness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
41
41
41
43
43
43
44
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Water Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Permissible Water Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Water Inflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Water Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery Heads over 1m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45
45
46
47
48
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Dimensions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Guarantee conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Customer services
Index
49
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Service
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
5
Instructions for use
Instructions for use
1
Safety
The safety of AEG electrical appliances conforms to the recognised
technical regulations and the legislation covering the safety of appliances. However, as manufacturers, we still regard it as our responsibility
to inform you of the following safety information.
Before Putting into Operation for the First Time
• Refer to the ”Installation and Connection Instructions” later in this
user information.
• When the unit is delivered in winter months with minus temperatures: Store the washing machine for 24 hours at room temperature
before putting it into operation.
Correct Use
• The washing machine is only designed for normal domestic washing.
If the unit is used for purposes other than that for which it is designed, the manufacturer can accept no liability for any resulting
damages.
• For safety reasons, conversions or modifications to the washing machine are not permissible.
• Use only detergents which are suitable for washing machines. Follow
the washing detergent manufacturer's instructions.
• The washing must not contain any flammable solvents. Also remember this when washing pre-cleaned washing.
• Do not use the washing machine for chemical cleaning.
• Dyes/dye removers may only be used in washing machines if the
manufacturer expressly allows these products. We cannot be held liable for any resulting damage.
• Use only water from the water mains. Use rainwater or service water
only if it meets the requirements outlined in DIN1986 and DIN1988.
• Frost damage is not covered by the warranty! If the washing machine
is in a room which is at risk from frost, an emergency emptying operation must be carried out when there is a frost risk (see the section
”Carry Out Emergency Emptying”).
6
Instructions for use
Child Safety
• Packaging components (e.g. films, polystyrene) can be hazardous to
children. Risk of suffocation! Keep packaging away from children.
• Children often cannot recognise the hazards associated with handling
electrical appliances. Therefore, ensure the necessary supervision during operation and do not allow children to play with the washing machine – there is a risk that children can get trapped inside.
• Ensure that children or small animals cannot climb into the washing
machine's drum.
• When disposing of the washing machine: Pull out the mains plug, destroy the door lock, cut off the electrical supply lead and throw away
the plug and the left-over cable. This means that children at play
cannot shut themselves inside and in so doing be in danger.
General Safety
• Repairs to the washing machine may only be carried out by qualified
specialists. Incorrect repairs may result in significant risk to the user.
If repairs are necessary, consult our customer service or your specialist dealer.
• Never use the washing machine if the mains cable is damaged or the
conrol panel, work surface or base panel area are so badly damaged
that the interior of the unit is openly accessible.
• Switch off the washing machine before carrying out cleaning, care
and maintenance work. Also pull the mains plug out of the socket or,
– if it is permanently connected, – switch off the circuit breaker at
the household power distribution box or completely remove the
screw-in fuse.
• If the appliance will be out of operation for an extended period of
time, unplug it from the mains.
• Never pull the cable to remove the plug from the socket. Always
pull the plug itself.
• Multiple connectors, couplings and extension cables must not be
used. There is a risk of fire with overheating!
• Do not spray down the washing machine with a water jet. Risk of
electric shock!
• The glass in the door becomes hot in the case of wash programmes
with high temperatures. Do not touch!
• Allow the washing solution to cool before carrying out an emergency
emptying operation or cleaning the drain pump.
7
Instructions for use
• Small animals can chew the power cables and water hoses. Risk of
electric shock and danger of water damage! Keep small animals away
from the washing machine.
2
Disposal
Dispose the packing material!
Dispose of your washing machine's packaging correctly. All the packaging materials used are harmless to the environment and can be recycled.
• Plastic parts are marked with standard international abbreviations:
>PE<
for polyethylene, e.g. sheet wrapping material
>PS<
for polystyrene, e.g. padding material (always CFC-free)
>POM< for polyoxymethylene, e.g. plastic clips
• Cardboard packaging is manufactured from recycled paper and
should be deposited in the waste paper collection for recycling.
Dispose the old appliance!
When you finally put your appliance out of operation,
please bring it to your nearest recycling centre or to your dealer.
2
Environment Tips
• The pre-wash cycle is not required for averagely dirty washing. This
saves washing powder/liquid, water and time (and does not harm the
environment).
• The washing machine is especially economical when you fully utilise
the stated filling quantities.
• For small amounts of washing, use only half to two thirds the recommended amount of washing powder/liquid.
• Suitable pretreatment enables stains and small amounts of dirt to be
removed. You can then wash at a lower temperature.
• Use the energy-saving program to wash garments which are lightly to
moderately dirty.
• There is often no need for conditioner. Try it once! If you use a dryer,
your washing will become soft and velvety even without conditioner.
• In the case of medium to high water hardness, (hardness range II or
higher, see ”Washing and Care Agents”), you should use water softener.
The washing powder/liquid can then always be metered for hardness
range I (= soft).
8
Instructions for use
Unit Description
Front View
Drawer for
washing
powder and
care agent
Control panel
Rating plate
(behind filling
door)
Filling door
Flap in front of
drain pump
Screw feet
(height-adjustable)
Drawer for Washing Powder and Care Agent
In-wash stain treatment
Main detergent
(powder) and
water-softener
if required
Pre-wash
detergent/
soaking agent
or water-softener
Liquid care agent
(conditioner,
finisher, starch)
9
Instructions for use
Control Panel
Spin button / RINSE HOLD
Additional program
buttons
Program sequence display
DOOR display
Multidisplay
Program selector
Button
START/PAUSE
OVER DOSING display
Program Selector
The program selector determines
the type of washing cycle (e.g.
water level, drum movement,
number of rinses, spin speed) according to the type of garments
being washed, and also the washing solution.
OFF (UIT, ARRET)
Switches off the washing machine. All other positions are
"switched on".
COTTONS/LINEN
(WITTE/BONTE WAS, BLANC/COULEURS)
Main washing cycle Cottons/Linen at 30 °C to 95 °C.
2
10
ENERGY SAVING position (E-STAND, ECO): Energy-saving program at
approx. 67 °C for slightly to normally dirty cottons, extended washing
time (cannot be combined with QUICK WASH/KORT/COURT).
Instructions for use
EASY-CARES (KREUKHERSTELLEND, DEFROISSABLE)
Main washing cycle for easy-care textiles (mixed fabrics) at 40 °C to
60 °C.
EASY IRON position (STRIJKVRIJ, SANS REPASSAGE): Main washing cycle at 40 °C for easy-care textiles which, with the aid of this program,
only have to be either gently ironed or not ironed at all.
DELICATES (FIJNE WAS, LINGE DELICAT)
Main washing cycle for delicates at 30 °C or 40 °C.
WOOLLENS (WOL, LAINE)/P (Handwash)
Main washing cycle (cold up to 40 °C) for machine-washable woollens
and for hand-washable wool textile and silk with the care symbol
ï (handwash).
GENTLE RINSE (FIJN SPOELEN, RINC. DELICAT)
Separate gentle rinse e.g. for rinsing hand-washed textiles (2 rinses,
liquid care agent from rinsing compartment æ is added, short spin).
STARCHING (STIJVEN, AMIDON.)
Separate starching, separate conditioner, separate impregnation of
damp washing (1 rinse, liquid care agent from the rinsing compartment
æ is added, spin).
PUMP OUT (POMPEN, VIDANGE)
Pumping off the water after a rinse hold (without spin).
3
Rinse hold means: The washing remains lying in the last rinsing water.
It is not spun.
SPIN (CENTRIFUG., ESSORAGE)
Pumping off the water after a rinse hold and spin, or separate spin of
hand-washed cottons/linen.
SHORT SPIN (KORT CENTRIFUG., ESSOR. DELICAT)
Pumping off the water after a rinse hold and short spin or separate
short spin of sensitive textiles (easy-care washing, delicates, woollens).
11
Instructions for use
Additional Program Buttons
The additional program buttons are for adapting
the washing program to the dirtiness of the washing. Additional programs are not required for
washing which is not excessively dirty.
Various functions can be combined with each
other, depending on the program.
PRE WASH (VOORWAS, PRELAV.)
Warm pre wash before the main washing cycle
which follows on automatically; with intermediate
spin for COTTONS/LINEN (WITTE/BONTE WAS,
BLANC/COULEURS) and EASY-CARES (KREUKHERSTELLEND, DEFROISSABLE), without intermediate spin for DELICATES (FIJNE WAS, LINGE
DELICAT).
If RINSE HOLD (GEEN CENTR., SANS ESSOR.) has been selected, no spinning will take place at all.
SOAKING (INWEKEN, TREMPAGE)
Approximately 50 minutes at 30°C water temperature. This is followed
by the main washing cycle.
QUICK WASH (KORT, COURT)
Shorter washing cycle for slightly dirty washing.
STAIN (VLEKKEN, TACHES)
For treating very dirty washing or stained washing. In-wash stain treatment is added during the program on a time-optimized basis. May only
be used for wash temperatures from 40°C as stain removers only become effective at higher temperatures.
3
12
With the WOOLLENS (WOL, LAINE) program/P (Handwash), it is not
possible to select the additional programs (any pressed buttons have no
effect).
Instructions for use
Consumption Values
The values for selected programs in the following tables were determined under normal conditions. However, there is a helpful orientation
aid for domestic operation.
Filling Quantity
in kg
Water
in Litres
Energy
in kWh
COTTONS/LINEN 95
(WITTE/BONTE WAS,
BLANC/COULEURS)
5
49
1,80
COTTONS/LINEN 601)
(WITTE/BONTE WAS,
BLANC COULEURS)
5
45
0,94
COTTONS/LINEN 40
(WITTE/BONTE WAS,
BLANC/COULEURS)
5
54
0,60
EASY-CARES 40
(KREUKHERSTELLEND,
DEFROISSABLE)
2,5
54
0,50
DELICATES 30
(FIJNE WAS, LINGE DELICAT)
2,5
50
0,25
WOOLLENS (WOL, LAINE)/P
(Handwash) 30
2
47
0,25
Program Selector/Temperature
1) Note: Program setting for a test in accordance with EN 60 456. The consumption
values can deviate from the stated values depending on the water pressure,
hardness, inlet temperature, room temperature, type and quantity of washing,
the washing powder/liquid used, fluctuations in the mains voltage and selected
additional functions.
What Does ”Update” Mean?
The washing programs of your washing machine are controlled by software.
New types of textiles or new washing powders/liquids could, in the future, require new washing programs. The software can be adapted to
these in most cases.
For further information on the ”Update”, consult the Customer Service.
You can also ask the Customer Service about the costs of an ”Update”.
13
Instructions for use
Before the First Wash
0 1. Pull out the washing powder drawer slightly.
2. Pour about 1 litre of water through the washing powder drawer into
the washing machine. With the next program start, this will close the
solution container and the eco-sluice can function correctly.
3. Run the washing cycle without washing (COTTONS/WITTE WAS, BLANC
95 °C, with half the amount of washing detergent). This removes residues left over from production on the drum and solution container.
14
Instructions for use
Prepare the Washing Cycle
Sort and Prepare the Washing
• Sort the washing according to care codes and type (see ”Washing
Types and Care Codes”).
• Empty pockets.
• Remove metal parts (paper clips, safety pins etc.).
• To prevent washing damage and washing snags: Close zip fasteners,
button closed bed covers and pillow cases, and tie together ribbons,
e.g. on aprons.
• Use clothing made of double-layer fabric (sleeping bag, anorak etc.).
• On knitted, coloured textiles and on wool and textiles with fitted
decorations: Turn inside out.
• Wash small and sensitive items (baby socks, stockings, tights, bras
etc.) in a washing net, a cushion with a zip fastener or in larger socks.
• Treat curtains with particular care. Remove small metal rollers or
small, burred rollers or tie them in a net or in a bag. We cannot accept any liability for damage.
• Do not wash coloureds and whites together in one washing cycle.
Otherwise, whites will discolour or turn grey.
• New coloureds often contain surplus dye. It is best to wash such
items separately the first time.
• Mix small and large items of washing! This speeds up theeffect of
washing and the washing is more favourably distributed during spinning.
• Loosen up the washing before loading it into the washing machine.
• Put the washing into the drum folded out.
• Pay attention to the care instructions ”Wash separately” and ”Wash
separately several times”!
15
Instructions for use
Washing Types and Care Codes
The care codes help you choose the correct washing program. The
washing should be sorted according to type and care code. The temperatures stated in the care codes are all maximum values.
Cottons ç
Textiles made of cotton and linen with this care code are insensitive to
mechanical stress and high temperatures. The program COTTONS/LINEN
(WITTE/BONTE WAS, BLANC/COULEURS) is suitable for this type of
washing.
Linen è ë
Textiles made of cotton and linen with this care code are insensitive to
mechanical stresses. The program COTTONS/LINEN (WITTE/BONTE WAS,
BLANC/COULEURS) is suitable for this type of washing.
Easy-Care Garments ê í
Textiles such as finished cottons, cotton mixtures, viscose and synthetics with this care code require mechanically more mild treatment. The
program EASY-CARES/EASY IRON (KREUKHERSTELLEND, DEFROISSABLE/STRIJKVRIJ, SANS REPASSAGE) is suitable for this type of washing.
Delicates ì
Textiles such as layered fibres, microfibres, viscose, synthetics and curtains with this care code require very gentle treatment. The program
DELICATES (FIJNE WAS, LINGE DELICAT) is suitable for this type of
washing.
Wool and Very Sensitive Washing 9 ì ï
Textiles such as wool, wool mixtures and silk with this care code are especially sensitive to mechanical stresses. The program WOOLLENS (WOL,
LAINE)/P (handwash) is suitable for this type of textiles.
Attention! Textiles with the care codeñ (Do not wash!) must not be
washed in the washing machine!
16
Instructions for use
Washing Detergents and Care Agents
Which washing detergent and care agent?
Use only washing detergents and care agents which are suitable for use
in washing machines. Always follow the manufacturer's instructions.
How much washing detergent and care agent?
The amount to be used depends on:
• the dirtiness of the washing
• the hardness category of the mains water supply
• the filling quantity
2
If the detergent manufacturer gives no details of the dosing quantities
for minimum loads, add one third less for half loads and, in the case of
very small loads and for EASY IRON (STRIJKVRIJ, SANS REPASSAGE),
only half the amount of detergent recommended for a full load.
Refer to the detergent/care agent manufacturer's instructions on use
and dosage.
Water Softener
For medium to high water hardness (hardness category II or higher) you
should use water softener. Pay attention to the manufacturer's instructions. Always then meter detergent for hardness category I (= soft). The
responsible water works can provide information on the local water
hardness.
2
Since the water softener is added before the main washing detergent,
(water pre-softening), eighty percent of the softener quantity stated on
the package is sufficient.
Water Hardness Details
Water Hardness °dH
(degrees German
hardness)
Water Hardness in mmol/l
(millimol per litre)
I – soft
0-7
up to 1.3
II – medium hard
7 - 14
1.3 - 2.5
III – hard
14 - 21
2.5 - 3.8
IV – very hard
over 21
over 3.8
Hardness Category
17
Instructions for use
Run a Washing Cycle
Brief Instructions
A washing cycle is run in the following steps:
0 1. Set the correct washing program:
– Set the program and temperature with the program selector
– Set any additional program(s)
2. If necessary, change the spin speed/select RINSE HOLD (GEEN CENTR.,
SANS ESSOR.).
3. Open the filling door and fill with washing.
4. Close the filling door.
5. Add washing detergent/care agent.
6. Start the washing program.
After the Washing Program Ends:
Attention! If the washing cycle ended with Rinse Hold, before opening
the filling door carry out PUMP (POMPEN, VIDANGE),
SPIN (CENTRIFUG., ESSORAGE) or SHORT SPIN (KORT CENTRIFUG., ESSOR. DELICAT).
7. Open the filling door and remove the washing.
8. Switch off the washing machine: Set the program selector to OFF
(UIT, ARRET).
18
Instructions for use
Set the Washing Program
For a suitable program, the right temperature and possible additional
programs for the relevant washing type, refer to the ”Program Tables”.
0 1. Set the program selector to the
required washing program with
the required temperature.
The probable duration of the set
program in minutes is shown in
the multi-display.
3
2. Select any additional programs:
The indicator for the selected additional program
lights up.
– Press another button to make different selection.
– Press the button again to deselect.
19
Instructions for use
Changing the spin speed/Selecting the rinse
hold function
If required, change the spin speed for the final
spin/select rinse hold:
0
3
Changing the spin speed
Continue pressing the spin speed/RINSE HOLD
(GEEN CENTR., SANS ESSOR.) button until the indicator for the desired spin speed is illuminated.
If you do not change the spin speed, the final spin
will be adjusted automatically depending on the
type of wash cycle:
– COTTONS/LINEN
1350 revolutions
(WITTE/BONTE WAS, BLANC/COULEURS)
per minute
– EASY-CARES/EASY IRON
900 revolutions
(KREUKHERSTELLEND, DEFROISSABLE/
per minute
STRIJKVRIJ, SANS REPASSAGE)
– DELICATES
700 revolutions
(FIJNE WAS, LINGE DELICAT)
per minute
– WOOLLENS
900 revolutions
(WOL, LAINE)/P (Handwash)
per minute
The speed for the intermediate spin cycle is dependent on the wash cycle selected and cannot be altered.
0
3
20
Selecting the rinse hold function
Continue pressing the spin speed/RINSE HOLD (GEEN CENTR., SANS ESSOR.) button until the RINSE HOLD (GEEN CENTR., SANS ESSOR.) indicator is illuminated.
If RINSE HOLD (GEEN CENTR., SANS ESSOR.) is selected, the washing
will remain in the final rinse water and will not be spun.
The washing will not be spun throughout the entire wash cycle. As a result the cycle is a very quiet one. RINSE HOLD (GEEN CENTR., SANS ESSOR.) is therefore especially suitable for washing at night.
Instructions for use
Opening and Closing the Filling Door
0
0
Open: Pull on the handle of the filling door.
Close: Press the filling door firmly closed.
The displays DOOR (DEUR/PORTE) and START/
PAUSE (START/PAUZE, MARCHE/PAUSE) show
whether the door can be opened while the appliance is switched on:
Display DOOR
(DEUR, PORTE)
Display START/PAUSE
(START/PAUZE, MARCHE/PAUSE)
Opening door
possible?
Glows green
Flashes red
Yes
Glows green
Glows red
Yes, after pressing button
START/PAUSE (START/
PAUZE, MARCHE/PAUSE)
Is off
Flashes or glows red
No1)
1) The main door is locked because of a high water level or a high temperature.
3
If
– the display DOOR (DEUR, PORTE) flashes red
– then the error code E40 flashes in the multidisplay
– and the display MAIN WASH (HOOFDWAS, LAVAGE) flashes
you tried to start a washing program without first closing the main
door properly. In this case push the door shut firmly and restart the
washing program.
Add the Washing
For the maximum filling quantities, refer to the ”Program Tables”.
For information on the correct preparation of the washing, see ”Sort
and Prepare the Washing”.
0 1. Sort and prepare the washing according to type.
2. Open the filling door: Pull on the handle of the filling door.
3. Fill with washing.
Attention! When closing the door, make
sure no items of washing get stuck! This
could damage textiles and the unit.
4. Close the filling door securely.
3
21
Instructions for use
Add Washing Detergent/Care Agent
Refer to the information on washing detergents and care agents, see
section ”Washing Detergents and Care Agents”.
0 1. Open the washing detergent drawer:
grip inside the flap on the drawer at the
bottom (1) and pull out the drawer as
far as it will go (2).
3
2. Fill with washing detergent/
care agent
Compartment for in-wash stain
treatment
Compartment for main washing
powder
(If you use water softener and need the
right compartment for the pre-wash/
soaking agent, add the water softener
to the main washing detergent in the
left compartment.)
Compartment for liquid care agent
(Conditioner, finisher, starch)
Attention! Fill the compartment up to the MAX mark.
If necessary, dilute viscous agent up to the MAX mark,
and dissolve powder starch.
Note: It is normal for a small amount of water to
be left in the compartment for liquid conditioner;
this will not affect the wash results.
Compartment for pre-wash agent/soaking agent
(only for additonal programs PRE WASH/VOORWAS, PRELAV.
and SOAKING/INWEKEN, TREMPAGE)
or for water softener
3. Push the drawer fully in.
3
22
If using Liquid Detergent/Tabs:
Add liquid detergent/tabs in the amount recommended by the washing
detergent industry. Follow the instructions on the detergent package.
Instructions for use
Start the Washing Program
0 1. Check that the water valve is open.
2. Start the washing program: Press the button
START/PAUSE (START/PAUZE, MARCHE/PAUSE).
The washing program is started.
3
The filling door is not correctly closed if, when the button START/PAUSE
(START/PAUSE, MARCHE/PAUSE) is pressed,
– the indicator DOOR (DEUR, PORTE) flashes red
– the fault code E40 in the multidisplay flashes
– and the indicator MAIN WASH (HOOFDWAS, LAVAGE) flashes.
In this case, press the filling door firmly closed and again press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE).
Completion of the Washing Program
Program Sequence Display
Before the start, the program steps to be carried out are
displayed by the program sequence display. Ther current
program step is displayed during the washing program.
Multi-Display
The expected remaining time (in minutes) is
shown up to the program end in the multi-display.
3
With automatic program adaptation by the controller of the washing
machine (quantity of washing, type of washing, imbalance recognition,
special rinse etc.), it is possible to stop or correct the counting of the
remaining run time.
23
Instructions for use
Changing a Washing Program
Changing or aborting a program
0 1. Press button START/PAUSE (START/PAUZE, MARCHE/PAUSE).
2. Turn programme knob to OFF (UIT, ARRET). The washing program is
aborted.
3. If required, set a new washing program. Otherwise turn the programme
knob to PUMP OUT (POMPEN, VIDANGE) and then press the button
START/PAUSE (START/PAUZE, MARCHE/PAUSE).
3
The washing program can be interrupted at any time with the button
START/PAUSE (START/PAUZE, MARCHE/PAUSE) and continued by pressing the button again. Changing the washing program is possible only
after the programme knob was turned to OFF (UIT, ARRET).
Select the Additional Program
The additional programs QUICK WASH (KORT, COURT) or STAIN
(VLEKKEN, TACHES) can also be selected after the program start.
0 1. Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE).
2. Press the button QUICK WASH (KORT, COURT) or the button STAIN
(VLEKKEN, TACHES).
3. Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) again.
The washing program is continued.
Change the Spin Speed
During the washing program, the spin speed can still be changed or
RINSE HOLD (GEEN. CENTR., SANS ESSOR.) can be set.
0 1. Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE).
2. Change the speed with the button Spin/RINSE HOLD (GEEN CENTR.,
SANS ESSOR.).
3. Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) again.
The washing program is continued.
24
Instructions for use
Washing Cycle Ended/Remove Washing
After a washing program has ended, END (EINDE, FIN) lights up on the
program sequence display.
If you selected RINSE HOLD (GEEN CENTR., SANS ESSOR.), the indicator
next to the button START/PAUSE (START/PAUZE, MARCHE/PAUSE)
flashes.
0 1. After a rinse hold, it is first necessary to pump off the water:
– Press either the button START/PAUSE (START/PAUZE, MARCHE/
PAUSE)
(water is pumped off and the washing is spun according to the program which has just run; after pressing the button START/PAUSE
(START/PAUZE, MARCHE/PAUSE) again, the spin speed can also still be
changed during spinning),
or
– turn the program selector to OFF (UIT, ARRET) and then to PUMP
(POMPEN, VINDAGE) and press the button START/PAUSE (START/
PAUZE, MARCHE/PAUSE)
(water is pumped off without spinning)
or
– turn the program selector to OFF (UIT, ARRET) and then to SPIN
(CENTRIFUG., ESSORAGE) or SHORT SPIN (KORT CENTRIFUG., ESSOR.
DELICAT) and press the button START/ PAUSE (START/PAUZE,
MARCHE/PAUSE)
(water is pumped off and the washing is spun or gently spun).
After the end of this program step, the indicator END (EINDE, FIN)
lights up.
2. Open the filling door.
As soon as the indicator DOOR (DEUR, PORTE) lights up green, the filling door can be opened.
3. Remove the washing.
4. Turn the program selector to OFF (UIT, ARRET).
5. After washing, pull out the washing detergent drawer slightly so that it
can dry out. Only lean the door against the washing machine so that
the latter can air out.
3
OVERDOS.
If the display OVER DOSING (OVERDOS., SURDOSAGE)
SURDOSAGE
lights up, too much washing detergent was used in the
washing program just ended. During the next wash, pay
attention to the dosing information of the washing detergent
manufacturer and pay attention to the filling quantity!
Attention! If the washing machine is not used for a long time:
Close the water tap and disconnect the washing machine from the
electricity mains.
25
Instructions for use
Program Tables
Washing
Not all possible settings are listed below - only the ones most commonly used in everyday operation and the most appropriate ones.
Type of Washing,
Care Codes
Cottons
ç
Energy-Saving
Program:
Cottons ç
Linen
è ë
26
Max.
Filling Quantity
(dry weight)1)
5kg
5kg
5kg
Program Selector
Temperature
Possible
Additional
Programs
COTTONS/LINEN
(WITTE/BONTE WAS,
BLANC/COULEURS)
95
PRE WASH
(VOORWAS,
PRELAV.)
SOAKING
(INWEKEN,
TREMPAGE)
QUICK WASH
(KORT, COURT)
STAIN
(VLEKKEN,
TACHES)
COTTONS/LINEN
(WITTE/BONTE WAS,
BLANC/COULEURS)
ENERGY SAVING
(E-STAND, ECO)
PRE WASH
(VOORWAS,
PRELAV.)
SOAKING
(INWEKEN,
TREMPAGE)
STAIN
(VLEKKEN,
TACHES)
COTTONS/LINEN
(WITTE/BONTE WAS,
BLANC/COULEURS)
30 to 60
PRE WASH
(VOORWAS,
PRELAV.)
SOAKING
(INWEKEN,
TREMPAGE)
QUICK WASH2)
(KORT, COURT)
STAIN
(VLEKKEN,
TACHES)3)
Instructions for use
Type of Washing,
Care Codes
Max.
Filling Quantity
(dry weight)1)
2.5kg
Easy-Cares
ê í
1kg
Delicates
ì
Woollens/
Handwash
9 ì ï
2.5kg
(or 15-20m2
curtains)
2kg
Program Selector
Temperature
EASY-CARES
(KREUKHERSTELLEND,
DEFROISSABLE)
40 to 60
EASY IRON4)
(STRIJKVRIJ,
SANS REPASSAGE)
40
Possible
Additional
Programs
PRE WASH
(VOORWAS,
PRELAV.)
SOAKING
(INWEKEN,
TREMPAGE)
QUICK WASH
(KORT, COURT)
STAIN
(VLEKKEN,
TACHES)
PRE WASH
(VOORWAS,
PRELAV.)
SOAKING
(INWEKEN,
DELICATES
(FIJNE WAS, LINGE DELICAT) TREMPAGE)
QUICK WASH
30, 40
(KORT, COURT)
STAIN
(VLEKKEN,
TACHES)3)
P
WOOLLENS
(WOL, LAINE),
COLD (KOUD, FROID) to 40
1) A 10-litre bucket holds approx. 2.5kg of dry washing (cottons).
2) QUICK WASH cannot be selected if washing at 50°C.
3) In the case of the STAINS, a minimum temperature of 40°C is required for the
stain remover to become effective.
4) Only if a filling quantity of 1kg is observed are creases in the washing largely
avoided.
5 to 7 easy-care men's shirts are equivalent to about 1kg of dry washing.
27
Instructions for use
Separate Conditioning/Starching/Impregnating
Type of Washing
Cottons/Linen
Max. Filling Quantity
(dry weight)
Program Selector
5kg
STARCHING
(STIJVEN, AMIDON.)
Max. Filling Quantity
(dry weight)
Program Selector
Separate Rinse
Type of Washing
Cottons/Linen
5kg
Easy-Cares
2.5kg
Delicates
2.5kg
Woollens/Handwash
GENTLE RINSE
(FIJN SPOELEN,
RINC. DELICAT)
2kg
Separate Spin
Type of Washing
Cottons/Linen
Program Selector
5kg
SPIN
(CENTRIFUG., ESSORAGE)
Easy-Cares
2.5kg
Delicates
2.5kg
Woollens/Handwash
28
Max. Filling Quantity
(dry weight)
2kg
SHORT SPIN
(KORT CENTRIFUG.,
ESSOR. DELICAT)
Instructions for use
Cleaning and Care
Control Panel
0
Attention! For cleaning panels and control parts, do not use furniture
polish or any aggressive cleaning agents.
Wipe off control panels with a damp cloth. Use warm water to do this.
Washing Detergent Drawer
The washing detergent drawer should be cleaned from time to time.
0 1. Pull out the washing detergent drawer as far as it will go.
2. Remove the washing detergent drawer with a firm pull.
3. Remove the softener insert from
the middle compartment.
4. Clean the softener insert under
running water.
5. Clean the compartments from the
rear with warm water.
It is best to use a bottle brush.
6. Push on the softener insert as far
as it will go so that it is secure.
29
Instructions for use
7. Use a brush to clean the entire
rinsing-in part of the washing machine, especially the nozzles on the
top side of the rinsing-in chamber.
8. Insert the washing detergent
drawer into the guide rails and
push it in.
Washing Drum
0
The washing drum is made of high-quality stainless steel. Rust deposits
on the drum can occur due to foreign bodies in the washing which can
cause rust.
Attention! Do not clean the stainless steel drum with acidic antiliming
agents, scouring agents containing chlorine or iron or steel wool. Our
Customer Service Department has suitable agents available.
Remove any rust deposits on the drum using a stainless steel cleaning
agent.
Filling Door
0
Check regularly whether there are deposits or foreign bodies in the
rubber sleeve behind the filling door and, if so, remove them.
Cleaning the drain pump
Paper clips, nails and so on can sometimes get into the washing machine with the washing and remain in the drain pump casing. Fluff and
strands of fabric can gather on these items and block the drain pump.
Therefore the drain pump should be cleaned at least once a year.
30
Instructions for use
Warning! Switch off the washing machine and pull out the mains plug
before cleaning the drain pump!
0 1. First carry out emergency emptying (see section "Carrying out emergency emptying").
2. Place a towel on the floor in front of the cover of the drain pump. Residual water can run out.
3. Unscrew the drain pump cover anticlockwise and pull it out.
1
4. Remove any foreign objects, fluff and
strands of fabric from the drain pump.
5. Check that you are able to turn the
pump wheel at the very rear of the
pump housing. (If the wheel rotates
with a jerky motion, this is normal.) If
you cannot turn the pump wheel, contact customer service.
6. Replace the cover. Insert the webs on
the cover laterally into the guide slots
and screw on the cover securely clockwise.
7. Close the emergency emptying hose and
place it in the holder.
8. Close the flap.
31
Instructions for use
What to do if ...
Remedying Faults
In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even during the warranty period.
• If the fault code E10, E20 or E40 is shown in
the multidisplay, you may be able to remedy
the fault yourself (see Faults Table below). After remedying the fault, press the button START/PAUSE (START/
PAUZE, MARCHE/PAUSE). If the fault code is shown again, inform
Customer Service.
• In the case of all other displayed faults (E and number or letter),
please inform the Customer Service and state the fault code.
Problem
The washing machine
does not work.
32
Possible Cause
Remedy
The mains plug is not
plugged in.
Plug in the mains plug.
The fuse of the building's
wiring is not in order.
Replace the fuse.
The filling door is not correctly closed.
Close the filling door; the
lock must engage audibly.
The button START/PAUSE
(START/ PAUZE, MARCHE/
PAUSE) was not pressed for
long enough.
Press the button START/
PAUSE (START/ PAUZE,
MARCHE/PAUSE) until the
program begins.
The filling door cannot
The child lock is set.
be closed.
Cancel the child lock (see
section „Child Lock").
Fault code E40 appears. The indicator
MAIN WASH (HOOFDWAS, LAVAGE) flashes.
Close the filling door correctly. Restart the program.
The filling door is not correctly closed.
Instructions for use
Problem
Possible Cause
Water valve is closed.
No water runs in.
Fault code E10 appears. The indicator
RINSE+ (SPOELEN+,
RINCAGE+) flashes.
Remedy
Open the water valve.
Restart the program.
Close the water valve. Unscrew the hose from the waFilter in screw connection of
ter valve, remove the filter
the intake hose is blocked.
and clean it under running
water.
Water valve is blocked with
limescale or is faulty.
Check he water valve and
have it repaired if necessary.
The transport packaging has
not been removed.
Remove transport packaging
according to the installation
and connection instructions.
The height-adjustable screw
feet are not correctly set.
Adjust in accordance with
the installation and connection instructions.
The washing machine
There is not much washing in
This does not impair the
vibrates during opera- the drum (e.g. only one
function.
tion or it is on an une- dressing gown).
ven surface.
Check the laying of the
The water could not be comdrainage hose and eliminate
pletely pumped off before
the bend if necessary, or
spinning because the drainclean the solution pump and,
age hose is bent
if required, remove foreign
or
bodies from the pump housthe solution pump is blocked.
ing.
The washing solution
of the main wash
froths up a lot.
Too much detergent was
probably used.
Meter the detergent exactly
in accordance with the
manufacturer's information.
33
Instructions for use
Problem
Possible Cause
Remedy
The screw connection on the Tighten the intake hose
intake hose is leaky.
screw connection.
Water runs out under
the washing machine.
The drainage hose is leaky.
Check the drainage hose and
replace it if necessary.
The washing solution pump
cover is not correctly closed.
Close cover correctly.
Washing stuck in the filling
door.
Stop the program, remove
washing from the filling
door, start a new program.
The emergency drain hose is
not properly shut off or it is
not water-tight.
Shut the emergency drain
hose off properly (see section
"Performing an Emergency
Drain"). Call your after-sales
service if the emergency
drain hose is not water-tight.
Conditioner not added,
Filter insert in the compart- Clean the detergent drawer
compartment æ for
ment for care agent not cor- and firmly attach the filter
care agent is full of
rectly attached or is blocked. insert.
water.
Washing heavily
creased.
Washing not well spun.
Residual water still visible in the drum.
Fault code E20 appears. The indicator
RINSE (SPOELEN,
RINCAGE) flashes.
34
Too much washing probably
put in.
Pay attention to the maximum filling quantity (see
Program Tables). For easycare textiles, select the program EASY IRON (STRIJKVRIJ,
SANS REPASSAGE).
Drainage hose bent.
Remove the bend.
Consult Customer Service.
Maximum pump head (outlet They can supply a retrofit kit
as a special accessory for dehead 1m from unit's floor
livery heads of more than
surface) exceeded.
1m.
Solution pump blocked.
Switch off the unit and pull
out the mains plug. Clean
the solution pump.
If a siphon is connected: Siphon blocked.
Clean the siphon.
Instructions for use
Problem
Possible Cause
Remedy
Wait until the display DOOR
(DEUR, PORTE) lights up
green.
Should it nevertheless be
necessary to open the main
The main door is locked be- door:
cause of a high water level or Turn the programme knob to
a high temperature. The dis- OFF (UIT, ARRET); turn the
play DOOR (DEUR, PORTE) is programme knob to PUMP
not lit.
OUT (POMPEN, VIDANGE).
Press button START/PAUSE
The main door cannot
(START/PAUZE, MARCHE/ARbe opened while the
RET). The main door can be
appliance is turned on.
opened after the water has
been pumped out.
Power failure!
(All displays have gone off.)
For safety reasons the door
remains locked for 4 to
10 minutes.
If water can be seen through
the window in the door, first
carry out emergency emptying (see section “Carrying out
Emergency Emptying Operation").
After approx. 4 to 10 minutes
the door can be opened
again by pulling the handle.
Water valve not fully opened. Open the water valve fully.
Washing detergent
residues form in the
washing detergent
drawer.
The rinsing water is
murky.
Filter in the screw connection of the intake hose on
the water valve or on the
unit is blocked.
Close the water valve. Unscrew the intake hose from
the water tap and from the
unit. Clean the filter.
The cause is probably a detergent with a high silicate
content.
No negative influence on the
rinsing result, use liquid detergent if necessary.
The corresponding display does not light up The selected additional prowhen one of the addi- gram cannot be combined
tional program butwith the set program.
tons is pressed.
Make another selection.
35
Instructions for use
If the washing result is not satisfactory
If the washing is grey and limescale forms in the drum
• Not enough washing detergent added.
• The right washing detergent was not used.
• Special types of stain were not pretreated.
• Program or temperature incorrectly set.
• If binary wahing detergents were used, the individual components
were not added in the correct ratio.
If there are still grey stains on the washing
• Washing contaminated with creams, grease or oils was washing with
too little detergent.
• Washing at too low temperature.
• A frequent cause is that conditioner – particularly concentrated
form, ended up on the washing. Wash out such stains as quickly as
possible and carefully use the right conditioner.
If foam is still visible after the final rinse
• Modern washing detergents can still produce foam, even in the final
rinse. The washing is still sufficiently rinsed.
If there are white residues on the washing
• These are the insoluble components of modern detergents.
They are not the result of an insufficient rinsing effect.
Shake or brush off the washing. Perhaps in future you should turn
the washing before washing it. Check the choice of detergent and use
a liquid detergent if necessary.
36
Instructions for use
Carry Out an Emergency Emptying Operation
• When the washing machine no longer pumps off the washing solution, an emergency emptying operation must be carried out.
• When the washing machine is in a room where there is a frost risk, an
emergency emptying operation must be carried out when there is a
frost risk.
Also: Unscrew the intake hose from the water tap and lay it on the
floor. Empty the drainage hose.
Warning! Switch off the washing machine before carrying out an
emergency emptying operation and pull out the mains plug.
Caution! The washing solution running out of the emergency emptying
hose can be hot. Risk of scalding! Allow the washing solution to cool
down before carrying out emergency emptying.
0 1. Provide a flat collecting vessel to catch the washing solution as it runs
out.
2. Open the flap downwards in the right
part of the base panel and pull it off.
1
3. Remove the emergency emptying hose
from the holder.
4. Place the collecting vessel underneath.
5. Release and pull out the plug of the
emergency emptying hose by turning it
anticlockwise.
The washing solution drains off. Depending on the amount of solution, it
may be necessary to empty the collecting vessel several times. To do this, temporarily close the emergency emptying
hose again with the plug.
37
Instructions for use
When all the washing solution has drained off:
6. Firmly push the plug into the emergency emptying hose and turn it
tight clockwise.
7. Put the emergency emptying hose back into the holder.
8. Insert the flap into the base panel and close.
Additional Rinse (RINSE+/SPOELEN+/RINCAGE+)
The washing machine is set for extremely economical water consumption. However, for persons who suffer from allergies, it can be helpful
to rinse with more water.
3
If RINSE+ (SPOELEN+, RINCAGE+) is set, an additional rinse is performed in the case of the programs COTTONS/LINEN (WITTE/BONTE
WAS, BLANC/COULEURS), EASY-CARES (KREUKHERSTELLEND,
DEFROISSABLE)/EASY IRON (STRIJKVRIJ, SANS REPASSAGE) and
DELICATES (FIJNE WAS, LINGE DELICAT).
No additional rinse is set when the unit is delivered.
Set Additional Rinse:
0 1. Turn the program selector to COTTONS/LINEN (WITTE/BONTE WAS,
BLANC/COULEURS), EASY-CARES/EASY IRON (KREUKHERSTELLEND,
DEFROISSABLE/STRIJKVRIJ, SANS REPASSAGE) or DELICATES (FIJNE
WAS, LINGE DELICAT) with any temperature.
2. Simultaneously keep the button PRE WASH (VOORWAS, PRELAV.) and
the button QUICK WASH (KORT, COURT) pressed for at least 2 seconds.
RINSE+ (SPOELEN+, RINCAGE+) lights up on the program run indicator.
The additional rinse is set. It remains saved until you cancel it again.
3
The additional rinse increases water consumption and the program run
time.
Cancel Additional Rinse:
0 1. Again turn the program selector to COTTONS/LINEN (WITTE/BONTE
WAS, BLANC/COULEURS), EASY-CARES/EASY IRON (KREUKHERSTELLEND, DEFROISSABLE /STRIJKVRIJ, SANS REPASSAGE) or DELICATES
(FIJNE WAS, LINGE DELICAT).
2. Simultaneously keep the button PRE WASH (VOORWAS, PRELAV.) and
the button QUICK WASH (KORT, COURT) pressed for at least 2 seconds.
RINSE+ (SPOELEN+, RINCAGE+) goes out in the program run indicator.
The additional rinse is cancelled.
38
Instructions for use
Child Safety Feature
When the child safety feature is
used, the filling door can no
longer be closed and no more
washing programs can be started.
0
1
0
Setting the Child Safety
Feature:
Use a coin to turn the rotary knob
(on the inside of the filling door)
clockwise as far as it will go.
Warning! The rotary knob must
not be pressed in following adjustment, otherwise the child safety
feature is not active. The rotary
knob must project as shown in the
diagram.
Cancelling the Child Safety
Feature:
Turn the rotary knob anticlockwise
as far as it will go.
39
Setting up and connection instructions
Setting up and connection instructions
Safety Instructions for Installation
• Do not tilt the washing machine onto its front or onto its right side
(looking from the front). Electrical components could get wet!
• Check the washing machine for transport damage. Never connect a
damaged unit. Consult your supplier in the event of damage.
• Ensure that all parts of the transport safeguard have been removed
and that the splash guard is fitted to the unit, see ”Removing the
Transport Safeguard”. Otherwise, damage to the unit or to adjacent
furniture could occur during spinning.
• Always insert the plug into a correctly installed PE socket.
• In the case of permanent installation: A permanent installation may
only be made by an authorised specialist.
• Before putting the unit into operation, ensure that the rated voltage
and current type shown on the unit's rating plate are the same as the
mains voltage and current type at the installation location. The required electrical fuse is also shown on the rating plate.
• Should work be carried out on the water supply installations in order
to allow the machine to be connected properly to the water supply,
this work must be carried out by an authorised installer.
• Should work be carried out on the mains supply in order to allow the
machine to be connected properly to the electricity supply, this work
must be carried out by an authorised electrician.
• The mains cable may only be replaced by the Customer Service or by
an authorised specialist.
40
Setting up and connection instructions
Setting Up the Unit
3
Washing machines with curved panels are not suitable for substructures.
Transporting the Unit
• Do not place the washing machine on its front side or on its right side
(looking from the front). Otherwise the electrical components can get
wet.
• Never transport the unit without using the transport safeguard. Do
not remove the transport safeguard until you reach the installation
site. Transporting the unit without the transport safeguard can result
in damage to the unit.
• Never lift the unit by the open filling door or by its base.
• When transporting the unit with a sack trolley: Attach the sack trolley only at the side.
Remove the Transport Safeguard
Attention! It is essential to remove the transport safeguard before putting the unit into
operation! Keep all parts of the
transport safeguard in a safe
place for possible later transport
(moving house).
0 1. Open both hose holders on the
rear of the unit and remove the
hoses and the mains cable.
2. Firmly pull both hose holders off
the unit.
41
Setting up and connection instructions
3
42
The special button A and the plug caps B (2 ea.) and C (1 ea.) are
supplied with the unit.
3. Remove the screw D, including
the compression spring with the
special button A.
4. Close off the hole with the plug
cap C.
Attention! Push in the plug cap
so firmly that it engages in the
rear panel (this protects the inside
of the unit against splash water).
5. Unscrew the two screws E using
the special button A.
6. Unscrew the four screws F using
the special button A.
7. Remove the transport rail G.
8. Screw the four screws F back in.
9. Close off the two large holes with
the plug caps B.
Attention! Push in the plug caps
so firmly that they engage in the
rear panel (this protects the inside
of the unit against splash water).
Setting up and connection instructions
Prepare the Installation Location
• The installation surface must be clean, dry and free of floor wax residue and other lubricating coatings so that the unit does not slide
away. Do not use any lubricants as sliding aids.
• It is not recommended to set up the washing machine on deep-pile
carpets or on floor coverings with soft foam underlays, as this would
mean that the stability of the unit would not be guaranteed.
• Use ordinary rubber mats as underlays in locations with small-format
tiles.
• Never use wood, card or similar underlays to compensate for minor
floor unevenness. Always use the adjustable screw-type feet of the
machine.
• If, for reasons of space, it is not possible to avoid setting up the unit
next to a gas cooker or coal stove: Insert a thermally-insulating panel
between the washing machine and the cooker (85 x 57cm). This panel
must have an aluminium foil on the side against the cooker.
• The washing machine must not be set up in a room where there
is a danger of frost. Frost damage!
• The intake and drainage hoses must not be bent or pinched.
Setting Up on a Concrete Pedestal
When setting up the washing machine on
a concrete pedestal, it is essential for
safety reasons to fit stand plates in which
the washing machine is then adjusted.
The stand plates are available from the
Customer Service under spare part
number 645 425 058.
Setting Up on a Vibrating floor
In the case of vibrating floors, especially wooden beam floors with flexible boards, securely screw a water-resistant wooden panel at least
15mm thick onto at least 2 of the floor beams. If possible, set up the
unit in a corner of the room where the wooden floor is best firmly installed and is therefore least likely to be susceptible to vibrations.
43
Setting up and connection instructions
Compensate for Floor Unevenness
Floor unevenness can be compensated for and the height can be corrected with the four adjustable screw feet. The height can be adjusted
in a range of +10 ... -5 mm.
To adjust the feet use the special spanner supplied for removing the
transport braces.
0 1. Slide the special key firmly onto
the hexagon head of the
threaded foot as far as it will go.
2. Adjust the screw feet so that the
unit is horizontal and stable. The
unit must not wobble over when
loaded.
3. If necessary, check the setting
with a spirit level.
Attention! Never compensate for
minor floor unevenness with underlays made of wood, card etc.
Always adjust the adjustable feet.
44
Setting up and connection instructions
Electrical Connection
Refer to the rating plate for details
of the mains voltage, current type
and the necessary fuses. The rating
plate is located at the top behind
the filling door.
;
This unit conforms to the following
EU directives:
– the ”Low Voltage Directive" 73/23/EU with changes
– the ”EMC Directive" 89/336/EWG with changes
Water Connection
3
The washing machine has safety features which prevent contamination
of the drinking water and which conform to the legal regulations of
the water authorities (e.g. for Germany: DVGW regulations). Other protection measures in the installation are therefore not necessary.
Attention!
– Units for connection to cold water must not be connected to hot water!
– Use only new sets of hoses for connection!
Permissible Water Pressure
The water pressure must be at least 1bar (= 10N/cm2 = 0.1MPa), maximum 10bar (= 100N/cm2 = 1MPa).
• In the case of more than 10bar: Connect a pressure-reducing valve
upstream.
• In the case of less than 1bar: Unscrew the intake hose on the unit
side on the inlet solenoid valve and remove the flow regulator (to do
this, remove the filter with pointed pliers and remove the rubber
washer behind). Replace the filter.
45
Setting up and connection instructions
Water Inflow
A pressure hose 1.5m in length is supplied.
If a longer inflow hose is required, only a VDE-approved, complete set
of hoses with fitted hose screw connections offered by our Customer
Service is permissible.
– Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for
washing machines without Aqua-Control.
– Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for
washing machines with Aqua-Control.
Attention! Never cut into pieces in order to extend the hoses!
Sealing rings are supplied either in the plastic
nuts of the hose screw connection or in the enclosed pack. Do not use other seals!
0 1. Connect the hose with the angled connection to
the machine.
3
Attention!
– Do not lay the supply hose
vertically downwards. Rather,
turn it to the right or left as
shown in the diagram.
– Only tighten the screw
connection manually.
2. Connect the hose with the
straight connection to a water tap with a screw
thread of R 3/4 (inches).
Attention! Only tighten the screw connection
manually.
3. By slowly opening the water tap before putting
the washing machine into operation, check
whether the connection is free of leaks.
46
Setting up and connection instructions
Water Drainage
The drainage hose can either be connected to a siphon or hung in a
wash basin or bath tub.
Only original hoses may be used for extension purposes (max. 3m on
the floor and then up to 80cm high). The Customer Service stocks hoses
in lengths of 2.7 and 4m.
Attention! It is absolutely essential to install the drainage hose free of
pinches.
0
Water Drainage into a Siphon
The grommet on the end of the hose fits
all commonly used siphon types.
Secure the grommet/siphon connecting
point with a hose clamp.
Draining the water into a basin
Attention!
– Small basins are not suitable for
draining the water into them.
Water could overflow!
– It is not permitted to submerge the
end of the drainage hose into the
pumped-off water. Water could be
sucked up into the hose!
0
– When hooked into a wash-basin or a
bath tub the drainage hose must be
protected from slipping out of place
by the supplied slip-on elbow. Otherwise the repelling power of the draining water can press the hose out of the
sink.
Fix the elbow to the water tap or to the
wall with string.
47
Setting up and connection instructions
Delivery Heads over 1m
To pump off the washing / rinsing agent, every washing machine has a
pump which transports liquids via the drainage hose up to a height of
1m, calculated from the machine's floor.
For delivery heads over 1m, consult the Customer Service.
Technical Data
Height adjustment
Filling quantity
(program-dependent)
Use
Drum speed, spin
Water pressure
Dimensions
(Measurements in mm)
48
Approx. +10/-5mm
max. 5kg
Domestic
see rating plate
1-10bar
(=10–100N/cm2 = 0.1–1.0MPa)
Guarantee conditions
Guarantee conditions
Belgium
DECLARATION OF GUARANTEE TERMS.
Our appliances are produced with the greatest of care. However, a defect may still occur. Our consumer services department will repair this upon request, either during or
after the guarantee period. The service life of the appliance will not, however, be reduced as a result.
This declaration of guarantee terms is based on European Union Directive 99/44/EC and
the provisions of the Civil Code. The statutory rights that the consumer has under this
legislation are not affected by this declaration of guarantee terms.
This declaration does not affect the vendor's statutory warranty to the end user. The
appliance is guaranteed within the context of and in adherence with the following
terms:
1. In accordance with provisions laid down in paragraphs 2 to 15, we will remedy free of
charge any defect that occurs within 24 months from the date the appliance is delivered to the first end user.
These guarantee terms do not apply in the event of use for professional or equivalent
purposes.
2. Performing the guarantee means that the appliance is returned to the condition it was
in before the defect occurred. Defective parts are replaced or repaired. Parts replaced
free of charge become our property.
3. So as to avoid more severe damage, the defect must be brought to our attention immediately.
4. Applying the guarantee is subject to the consumer providing proof of purchase showing the purchase and/or delivery date.
5. The guarantee will not apply if damage caused to delicate parts, such as glass (vitreous
ceramic), synthetic materials and rubber, is the result of inappropriate use.
6. The guarantee cannot be called on for minor faults that do not affect the value or the
overall reliability of the appliance.
7. The statutory warranty does not apply when defects are caused by:
• a chemical or electrochemical reaction caused by water,
• abnormal environmental conditions in general,
• unsuitable operating conditions,
• contact with harsh substances.
8. The guarantee does not apply to defects due to transport which have occurred outside
of our responsibility. Nor will the guarantee cover those caused by inadequate installation or assembly, lack of maintenance or failure to respect the assembly instructions or
directions for use.
9. Defects that result from repairs or measures carried out by people who are not qualified
or expert or defects that result from the addition of non-original accessories or spare
parts are not covered by the guarantee.
10. Appliances that are easy to transport may be delivered or sent to the consumer services
department. Home repairs are only anticipated for bulky appliances or built-in appliances.
11. If the appliances are built-in, built-under, fixed or suspended in such a way that removing and replacing them in the place where they are fitted takes more than half an hour,
the costs that result therefrom will be charged for. Connected damage caused by these
removal and replacement operations will be the responsibility of the user.
49
Guarantee conditions
12. If, during the guarantee period, repairing the same defect repeatedly is not conclusive,
or if the repair costs are considered disproportionate, in agreement with the consumer,
the defective appliance may be replaced with another appliance of the same value.
In this event, we reserve the right to ask for a financial contribution calculated according to the length of time it has been used.
13. A repair under guarantee does not mean that the normal guarantee period will be extended nor that a new guarantee period begins.
14. We give a twelve month guarantee for repairs, limited to the same defect.
15. Except in the event where liability is legally imposed, this declaration of guarantee
terms excludes any compensation for damage outside the appliance for which the consumer wishes to assert his rights. In the event of legally admitted liability, compensation will not exceed the purchase price paid for the appliance.
These guarantee terms are only valid for appliances purchased and used in Belgium. For
exported appliances, the user must first make sure that they satisfy the technical conditions (e.g.: voltage, frequency, installation instructions, type of gas, etc.) for the country concerned and that they can withstand the local climatic and environmental
conditions. For appliances purchased abroad, the user must first ensure that they meet
the qualifications required in Belgium. Non-essential or requested adjustments are not
covered by the guarantee and are not possible in all cases.
Our consumer services department is always at your disposal, even after the guarantee
period has expired.
Address for our consumer services department:
ELECTROLUX HOME PRODUCTS BELGIUM
Bergensesteenweg, 719 - 1502 LEMBEEK
Tel.: 02.363.04.44
50
Customer services
Customer services
Belgium
Tel.:
Electrolux Home Products Belgium
ELECTROLUX SERVICE
Bergensesteenweg 719
1502 Lembeek
Province de Liège:
S.D.E.
Rue Gaucet 26
4020 Liege
Fax.:
Consumer services 02/363.04.44 02/363.04.00
02/363.04.60
04/343.11.60 04/343.47.68
51
52
53
Index
Index
C
Care agent . . . . . . . . . . . . . . . . . 9, 17, 18,
Child safety feature . . . . . . . . . . . . . . .32,
Conditioner . . . . . . . . . . . . . 8, 9, 11, 22,
Cottons . . . . . . . . . . . . . . . . . . .10, 16, 26,
Curtains . . . . . . . . . . . . . . . . . . . . . . . . .15,
Customer service . . . . . . . 13, 30, 32, 51,
Q
22
39
28
28
27
55
D
Delicates . . . . . . . . . . . . . . . . . . . . . 11, 16,
Detergent . . . . . . . . . . . . . . . . . . . . . 9, 17,
Detergent dispenser drawer . . . . . . . . . . 9,
Door opening . . . . . . . . . . . . . . . . . 21, 25,
Drain pump . . . . . . . . . . . . . . . . . . . . . . . 9,
27
22
22
35
30
E
Easy iron . . . . . . . . . . . . . . . . . .11, 16, 27, 34
Easy-cares . . . . . . . . . . . . . . . . . . . 11, 16, 27
Eco-sluice . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Emergency emptying . . . . . . . . . . . . . . . . . 37
Energy saving . . . . . . . . . . . . . . . . . . . .10, 26
F
Filling quantity . . . . . . . . . . . . . . . . . . .13, 26
Frost hazard . . . . . . . . . . . . . . . . . . . . . . . 6, 37
G
Gentle rinse . . . . . . . . . . . . . . . . . . . . . .11, 28
H
Handwash . . . . . . . . . . . . . . . . . . . 11, 27, 28
I
In-wash stain treatment . . . . . . . . . . . . 9, 22
L
Linen . . . . . . . . . . . . . . . . . . . . .10, 16, 26, 28
M
Multi-display . . . . . . . . . . . . . . . . . . . . . . . . 55
Multidisplay . . . . . . . . . . . . . . . . . . 10, 23, 32
O
Over-dosed . . . . . . . . . . . . . . . . . . . . . . . . . 25
P
Pre wash . . . . . . . . . . . . . . 12, 19, 22, 26,
Pre-wash detergent . . . . . . . . . . . . . . . . 9,
Program aborting . . . . . . . . . . . . . . . . . . . .
Program changing . . . . . . . . . . . . . . . . . . .
Program sequence display . . . . . . . . . . . . .
Pump out . . . . . . . . . . . . . . . . . . . . . . . .11,
54
27
22
24
24
23
25
Quick wash . . . . . . . . . . . .12, 19, 24, 26, 27
R
Rating plate . . . . . . . . . . . . . . . . . . . 9, 45, 55
Rinse hold . . . . . . . . . . . . . . . . . . . .11, 20, 25
S
Silk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11,
Soaking . . . . . . . . . . . . . . .12, 19, 22, 26,
Soaking agent . . . . . . . . . . . . . . . . . . . . 9,
Spin . . . . . . . . . . . . . . . . . .11, 18, 20, 24,
Stain . . . . . . . . . . . 8, 12, 19, 24, 26, 27,
Starching . . . . . . . . . . . . . . . . . . . . . . . . 11,
16
27
22
28
36
28
U
Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
W
Warranty . . . . . . . . . . . . . . . . . . . . . . 6, 32, 49
Washing
coloured . . . . . . . . . . . . . . . . . . . . . . . . . .15
lightly soiled . . . . . . . . . . . . . . . . . . . . 8, 12
sensitive . . . . . . . . . . . . . . . . . . . . . . 15, 16
Washing detergent . . . . . . . . . . . . . . . . . . .17
Washing powder . . . . . . . . . . . . . . . . . 18, 22
Water
hardness . . . . . . . . . . . . . . . . . . . . . . . 8, 17
softener . . . . . . . . . . . . . . . . . . 8, 9, 17, 22
Woollens . . . . . . . . . . . . . . . . . 11, 16, 27, 28
hand-washable . . . . . . . . . . . . . . . . . 11, 27
Service
Service
In the section ”What to do if ...” there is a list of some faults which you
can remedy yourself. Look there first if a fault occurs. If you find no information there, please consult your Customer Service Centre.
Always prepare in advance for the discussion. By doing so you will simplify the diagnosis and the decision on whether customer service is
necessary.
Note the PNC-number and the
S-number. Both can be found on the
rating plate on the inside of the door
on your washing machine.
PNC .....................................................
S-No. .....................................................
Answer as precisely as possible:
• What form does the fault take?
• Under what circumstances does the fault occur?
• Does the multi display show an error message?
When do you incur costs even during the warranty period?
– if you could have dealt with the fault yourself with the aid of the
Faults Table (see the section ”What to do if ...”) ,
– if several trips by the customer service technician are necessary because he had not received all the necessary information before his
visit and must now e.g. fetch spare parts. These multiple trips can be
avoided if you prepare your phone call as described above.
55
From the Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg.hausgeraete.de
© Copyright by AEG
822 943 077-01-250203-03
Subject to change without notice

advertisement

Related manuals

Download PDF

advertisement