Aeg-Electrolux | BP7304001M | User manual | Aeg-Electrolux BP7304001M User Manual

BP7304001
EN OVEN
USER MANUAL
2
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect,
from specialist cookware to cutlery baskets, from bottle holders to delicate
laundry bags…
Visit the webshop at:
www.aeg.com/shop
Contents
3
CONTENTS
4
7
9
10
12
14
16
17
19
22
25
26
27
29
Safety information
Product description
Before first use
Control panel
Daily use
Clock functions
Automatic programmes
Using the accessories
Additional functions
Care and cleaning
What to do if…
Environment concerns
Installation
Guarantee/Customer Service
Centres
The following symbols are used in this user
manual:
Important information concerning your
personal safety and information on how to
avoid damaging the appliance.
General information and tips
Environmental information
Subject to change without notice.
4
Safety information
SAFETY INFORMATION
Before the installation and use, read this manual carefully:
• For your personal safety and the safety of your property
• For the respect of the environment
• For the correct operation of the appliance.
Always keep these instructions with the appliance also if you move or sell it.
The manufacturer is not responsible if incorrect installation or use results in damage.
Children and vulnerable people safety
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in safe
way and understand the hazards involved. Children shall not play with the appliance.
• Keep all packaging away from children. There is the risk of suffocation or physical injury.
• WARNING: Keep children and animals away from the appliance when the door is open
or the appliance is in the operation, because it becomes hot. There is the risk of injury or
other permanent disability.
• If the appliance has Child Lock or Key Lock (Control Lock) function, use it. It prevents
children and animals from accidental operation of the appliance.
General safety
• Do not change the specifications of this appliance. There is the risk of injury and damage
to the appliance.
• Do not let the appliance stay unattended during operation.
• Switch off the appliance after each use.
Installation
• Only an approved electrician can install and connect the appliance. Contact an approved
service centre. This is to prevent the risks of structural damage or physical injury.
• Make sure that the appliance is not damaged because of transport. Do not connect a
damaged appliance. If necessary, contact the supplier.
• Remove all packaging, stickers and layers from the appliance before first use. Do not remove the rating plate. It can invalidate the guarantee.
• Make sure that the appliance is disconnected from the power supply during the installation.
• Be careful when you move the appliance. The appliance is heavy. Always use safety
gloves. Do not lift the appliance by the handle.
• The electrical installation must have an isolation device which lets you disconnect the
appliance from the mains at all poles. The isolation device must have a contact opening
width of minimum 3 mm.
• You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
Safety information
5
• Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable.
• Make sure that the appliance is installed below and adjacent safe structures.
• Keep the minimum distances to the other appliances and units.
• The appliance cannot be positioned on a base.
• Built in ovens and built in cooking surfaces are attached with special connection system.
To prevent damage to the appliance, only use an appliance with the appliances from the
same manufacturer.
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical data on the rating plate agree with your domestic power
supply.
• Information on the voltage is on the rating plate.
• Always use a correctly installed shockproof socket.
• Do not use multi-way plugs, connectors and extension cables. There is the risk of fire.
• Do not replace or change the mains cable. Contact the service centre.
• Make sure not to squash or cause damage to the mains plug (if applicable) and cable
behind the appliance.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug – if
applicable.
Use
• The appliance is only for domestic use. Do not use the appliance for commercial and industrial use.
• Only use the appliance for domestic cooking tasks. This is to prevent physical injury to
persons or prevent damage to property.
• Do not use the appliance as a work surface or storage surface.
• The interior of the appliance becomes hot during use. There is the risk of burns. Do not
touch the heating elements in the appliance. Use gloves when you insert or remove the
accessories or pots.
• Be careful when you remove or install the accessories to prevent damage to the oven
enamel.
• Always stay away from the appliance when you open the door while the appliance is in
operation. Hot steam can release. There is the risk of skin burns.
• To prevent damage or discoloration to the enamel:
– Do not put any objects directly on the appliance floor and do not cover it with aluminium foil.
– Do not put water directly into the hot appliance.
– Do not keep moist dishes and food in the appliance after you finish the cooking.
• Discoloration of the enamel has no effect on the performance of the appliance so it is
not a defect in the sense of the warranty law.
• Do not apply pressure on the open door.
6
Safety information
• Always close the appliance door when you cook, even while grilling.
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the appliance from the
power supply.
• Before maintenance, make sure that the appliance is cold. There is the risk of burns.
There is the risk that the glass panels can break.
• Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a
fire.
• Regular cleaning prevents the surface material from deteriorating
• Use a deep baking tray for very moist cakes to prevent that fruit juices cause stains that
can be permanent.
• For your personal safety and the safety of your property, only clean the appliance with
water and a soap. Do not use flammable products or products that can cause corrosion.
• Do not clean the appliance with steam cleaners, high-pressure cleaners, sharp objects,
abrasive cleaning agents, abrasive sponges and stain removers
• If you use an oven spray, follow the instructions from the manufacturer.
• Do not clean the glass door with abrasive cleaning agents or metal scraper. Heat resistant surface of the inner glass can break and shatter.
• When the door glass panels are damaged they become weak and can break. You must
replace them. Contact the service centre.
• Be careful when you remove the door from the appliance. The door is heavy!
• Do not clean catalytic enamel (if applicable).
Risk of fire
• Open the door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air. There is the risk of fire.
• Do not let sparks or open flames come near the appliance when you open the door.
• Do not put flammable products or items that are wet with flammable products, and/or
fusible objects (made of plastic or aluminium) in, near or on the appliance.
Pyrolytic cleaning
WARNING!
Risk of burns.
• Keep children away from the appliance while the Pyrolytic cleaning is in operation. The
appliance becomes very hot.
• Provide good ventilation during and after each Pyrolytic cleaning.
• Remove any pets (especially birds) from the vicinity of the oven location during and after
the Pyrolytic cleaning and first use maximum temperature operation to a well ventilated
area.
• Read carefully all the instructions for Pyrolytic cleaning.
Product description
7
Oven lamp
• The type of light bulb or halogen lamp used for this appliance is only for household appliances. Do not use it for house lighting.
• If it becomes necessary to replace the lamp, use one of the same power and specifically
designed for household appliances only.
• Disconnect the appliance from the power supply before the replacement of the oven
lamp. There is the risk of electrical shock.
Service centre
• Only an approved engineer can repair or work on the appliance. Contact an approved
service centre.
• Use only original spare parts.
Disposal of the appliance
• To prevent the risk of physical injury or damage
– Disconnect the appliance from the power supply.
– Cut off the mains cable and discard it.
– Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.
PRODUCT DESCRIPTION
General overview
2
1
3
4
5
5
4
10
3
6
2
1
7
8
9
8
Product description
1
2
3
4
5
6
7
8
9
10
Control panel
Electronic programmer
Socket for the core temperature sensor
Heating element
Oven lamp
Fan
Rear wall heating element
Bottom heat
Shelf support, removable
Shelf positions
Accessories
• Wire shelf
For cookware, cake tins, roasts.
• Baking tray
For cakes and biscuits.
• Grill / roasting pan
To bake and roast or as pan to collect fat.
Before first use
9
• Core Temperature Sensor
To measure how far the food is cooked.
BEFORE FIRST USE
WARNING!
Refer to "Safety information" chapter.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
First connection to the mains
After first connection to the mains all symbols in the display are on for some seconds. For
the subsequent few seconds the display shows software version.
First setting the time of day
After the software version goes off, the display shows "h" and "12:00".
Setting the time of day:
or
to set hours.
1. Touch
or .
2. Touch
or
to set minutes.
3. Touch
or .
4. Touch
The Temperature/Time display shows new time.
Changing the time of day
You can change the time of day only if the appliance is off.
Touch . flashes in the display. To set new time of day use the above procedure.
10
Control panel
CONTROL PANEL
Electronic programmer
1
2
3
4
5
6
7
8
9
10
Use the sensor fields to operate the appliance.
Sensor Field
Function
-
DISPLAY
Shows the current settings of the appliance.
2
ON/OFF
To activate and deactivate the appliance.
3
OPTIONS
To set an oven function or programme.
Straight access to the oven function when the
appliance is off.
4
MY FAVOURITE PROGRAMME
You can store your favourite programme. Use it
to access your favourite programme directly, also
when the appliance is off.
5
TEMPERATURE / FAST
HEAT UP
To set and examine cavity temperature or core
temperature sensor temperature. If you press it
and hold for three seconds, it turns Fast heat up
function ON and OFF.
Straight access to the temperature setting of
the first oven function when the appliance is
off.
6
UP, DOWN
To choose an oven function, clock function and
to set the minute minder, temperature or time of
day.
7
OK
8
OVEN LIGHT
9
CLOCK
To set the clock function.
10
MINUTE MINDER
To set the minute minder.
1
Description
To confirms the selection or setting.
To set the oven lamp on or off.
11
Control panel
Display
1
2
7
3
6
5
4
Oven function symbol
Temperature/Time display
Clock/Residual heat display (also Minute minder and Time of day)
Residual heat indicator
Indicators for the clock functions (refer to the table "Clock functions")
Heat up indicator
Number of oven function/programme
1
2
3
4
5
6
7
Other indicators of display
Symbols
/
/
Name
Description
Function
You can choose an oven function.
Automatic programme
You can choose an oven programme.
My favourite programme
The favourite programme operates.
kgr/gr
An oven programme with weight input operates.
h/min
A clock function operates.
Temperature / fast heat up
The function operates.
Temperature
You can examine or change the temperature.
Core temperature sensor
The core temperature sensor is in the core temperature
sensor socket.
Door lock
The door lock function operates.
Oven light
The oven light is off.
Minute minder
The minute minder function operates.
Heat up indicator
If you set an oven function, the bars in the display come on one by one. The bars show
that the temperature in the appliance increases or decreases.
When the appliance is at the set temperature Heat up indicator goes off the display.
12
Daily use
DAILY USE
WARNING!
Refer to "Safety information" chapter.
To operate the appliance you can use:
• manual mode -to set an oven function, the temperature and the cooking time manually.
• automatic programmes -to prepare a dish when you do not have a knowledge or experience in cooking.
Setting the oven function
1.
2.
3.
Touch .
The display shows a preset temperature, symbol and number of the oven function.
flashes in the display.
or
to set an oven function.
Touch
or the appliance starts automatically after five seconds.
Touch
If you activate the appliance with or and do not set any oven function or programme
the appliance will deactivate automatically after 20 seconds.
Oven function
Application
1
True Fan Cooking
To bake maximum on three shelf positions at the same time.
Decrease the oven temperatures (68-104 °F) compared with
Conventional. And to dry food.
2
Pizza Setting
To bake on one shelf position food with a more intensive
browning and a crispy base. Decrease the oven temperatures
(68-104 °F) compared with Conventional cooking.
3
Slow Cook
4
Conventional
Cooking
To bake and roast food on one shelf position.
5
Frozen Foods
To make your convenience food like e.g. French Fries, Wedges, spring rolls crispy.
6
Turbo Grilling
To roast larger meat joints or poultry with bones on one
shelf position. Also to gratinate and to brown.
7
Fast Grilling
8
Grilling
9
Keep Warm
10
Defrost
To prepare very lean, tender roasted food.
To grill flat food in large quantities. To toast bread.
To grill flat food in the middle of the grill. To toast bread.
To keep food warm.
To defrost frozen food.
13
Daily use
Oven function
Application
11
Bottom Heat
To bake cakes with a crispy base, and to preserve food.
12
ECO Roasting
ECO functions let you to optimize the energy consumption
during cooking. Thus it is necessary to set the cooking time
first. To get more information about the recommended settings, refer to the cooking tables with the equivalent usual
oven function.
13
Pyro Cleaning
For automatic pyrolytic cleaning of the oven. The oven temperature is at approximately 932 °F. It burns off residual dirt
in the oven. This can then be removed with a cloth when the
oven is cold.
Changing the oven temperature
Touch
/
to change the temperature in steps of 41 °F.
When the appliance is at the set temperature, an acoustic signal operates three times and
the Heat up indicator goes off.
Examining the oven temperature
You can examine the temperature in the appliance when the function or programme operates.
.
1. Touch
The Temperature/Time display shows the temperature in the appliance.
If you want to change the oven temperature, touch
2.
one more time and use
or
.
to go back to the set temperature or the display will show it automatically
Touch
after five seconds.
Fast heat up function
The fast heat up function decreases the heat up time.
Do not put food in the oven when the fast heat up function operates.
for more then three seconds.
Activating the fast heat up function: Touch and hold
If you activate the fast heat up function, the bars on the display flash one by one to
show that the function operates.
The fast heat up is not available with every oven function. An acoustic signal operates if the
fast heat up is not available for set function.
14
Clock functions
Energy saving
The appliance has some features that help you save energy during everyday cooking:
• Residual heat:
– the oven function or programme operates: the heating elements are deactivated 10%
time earlier (the lamp and fan continue to operate). The condition: the cooking time is
longer then 30 minutes or you use the clock functions (Duration, End, Time delay).
– the oven is off: you can use the heat to keep the food warm. The indication: the clock/
Residual heat display shows the remaining temperature, the bars show the decreasing
temperature.
• Oven lamp off - touch to deactivate the oven lamp during cooking;
at the same time
• Display off - if necessary, deactivate the appliance. Touch and
until the display goes out (or on).
• Eco functions - refer to "Oven function".
CLOCK FUNCTIONS
SYMBOL
FUNCTION
DESCRIPTION
COUNT UP TIMER
To set count up. It shows how long the appliance operates.
This function has no effect on the operation of the appliance.
TIME OF DAY
To examine the time of day. For changing the time of day refer to 'Setting the time of day'.
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates. You can use Duration
and End at the same time (Time delay), if the appliance is to
be activate and deactivate automatically later.
SET+GO
To start the appliance with necessary settings with only one
touch of the sensor field, any time later.
Count Up Timer
Use the Count Up Timer to monitor how long the appliance operates. It is on immediately
when the appliance starts to heat.
Reset the Count Up Timer: touch again and again until flashes in the display. Touch
until the display shows "00:00" and the Count Up Timer starts to count up again.
You can not use Count Up Timer when Duration or End is set.
Setting the DURATION
1.
Activate the appliance and set an oven function and temperature.
15
Clock functions
2.
3.
4.
5.
Touch again and again until the display shows .
flashes in the display.
or
to set minutes for DURAUse
TION.
to confirm
Touch
or
to set hours for DURATION.
Use
If you touch or
during setting hours for DURATION, the appliance goes to setting of
the END function.
6. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
Touch any sensor field or open the oven door to stop an acoustic signal.
7. Deactivate the appliance.
Setting the END
1.
2.
3.
4.
5.
6.
Activate the appliance and set an oven function and temperature.
Touch again and again until the display shows .
flashes in the display.
or
to set END (first you set minutes and then hours) and
or
Use
confirm.
When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
Touch any sensor field or open the oven door to stop an acoustic signal.
Deactivate the appliance.
to
Setting the SET+GO
To start of the appliance with necessary settings with only one touch of the sensor field,
any time later.
1. Set an oven function (or programme) and temperature (refer to "Setting the oven
function" and "Changing the oven temperature").
2. Set DURATION (refer to "Setting the DURATION").
3. Touch again and again until will flash in the display.
to set the SET+GO function.
4. Touch
The display shows and with a dot. This dot shows which clock function is activated.
5. Touch any sensor field (apart from ON/OFF) to start the SET+GO function.
You can use SET+GO function only if DURATION is set.
Check result (selected models only)
If you set END or DURATION function, 2 minutes before end of cooking an acoustic signal
sounds and lamp activates. The appliance goes to the setting of the END or DURATION
16
Automatic programmes
function. During these two minutes you can examine the cooking results and, if necessary,
add END or DURATION time.
Setting the Time delay function
DURATION and END can be used at the same time, if the oven is to be switched on
and off automatically later. In this case first set DURATION and then END function
(refer to "Setting the DURATION" and "Setting the END ").
When the Time delay function is activated the display shows static symbol of the oven
function, with a dot and . The dot shows which clock function is on in the Clock/
Residual heat display.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This function has no
effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the
appliance is off.
1. Touch .
and "00" flash in the display.
or
to set MINUTE MINDER.
2. Use
First you set seconds and then minutes
and hours.
or the MINUTE MINDER starts
3. Touch
automatically after five seconds.
4. When set time ends, an acoustic signal
operates for two minutes and "00:00"
and flash in the display.
5. Touch any sensor field or open the oven door to stop an acoustic signal.
AUTOMATIC PROGRAMMES
WARNING!
Refer to "Safety information" chapter.
There are 20 automatic programmes and recipes. Use an automatic programme or recipe
when you do not have a knowledge or experience how to prepare a dish. You can find the
recipes for the automatic programmes in the "Recipe book".
There are three types of automatic programmes:
• Automatic recipes;
• Automatic programmes with weight input;
• Automatic programmes with core temperature sensor;
Automatic recipes
Setting an automatic recipe:
1. Touch two times until the display shows .
The display shows symbol and number of the automatic programme.
Using the accessories
2.
3.
4.
5.
17
Touch
or
to choose the automatic recipes.
or the automatic recipe activates automatically after five seconds.
Touch
When set time ends, an acoustic signal operates for two minutes. Symbol flashes.
The appliance deactivates.
Touch any sensor field or open the oven door to stop an acoustic signal.
Automatic programmes with weight input
If you set the weight of the meat, the appliance calculates the roasting time.
1. Touch again and again until the display shows .
or
to set the weight programme (refer to "Recipe book").
2. Touch
The display shows: cooking time, duration symbol , a default weight, a unit of
measurement (kg, g).
or the settings save automatically after five seconds.
3. Touch
4. The appliance starts. A symbol of the weight unit flashes in the display. During this
or
. Touch
.
time you can change the default weight value with
5. When set time ends, an acoustic signal operates for two minutes. flashes.
The appliance deactivates.
6. Touch any sensor field or open the oven door to stop an acoustic signal.
Automatic programmes with core temperature sensor
The core temperature of the food is default and fixed in programmes with core temperature
sensor. The programme ends when the appliance is at the set core temperature.
1. Touch again and again until the display shows .
2. Install the core temperature sensor (refer to "The core temperature sensor").
or
to set the core temperature sensor programme.
3. Touch
When a core temperature sensor programme is set, the display shows the cooking
.
time, and
or the settings save automatically after five seconds.
4. Touch
5. When set time ends, an acoustic signal operates for two minutes. flashes.
The appliance deactivates.
6. Touch any sensor field or open the oven door to stop an acoustic signal.
USING THE ACCESSORIES
WARNING!
Refer to "Safety information" chapter.
The core temperature sensor
The core temperature sensor measures the core temperature of the meat. When the meat is
at the set temperature, the appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table for roasting in the recipe book.
18
Using the accessories
• The core temperature: refer to the table for the core temperature sensor in the recipe
book.
Only use the core temperature sensor supplied or original replacement parts.
1.
2.
3.
4.
5.
Activate the appliance.
Put the point of the core temperature
on the
sensor (with the symbol
handle) into the centre of the meat.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows a flashing symbol
and the default set core temperature. The temperature is 140 °F during
the first use, and the last set value during each subsequent use.
or
to set the core temperTouch
ature.
or the settings save autoTouch
matically after 5 seconds.
You can set the core temperature only when the symbol
flashes. If the display shows a
before you set the core temperature, use
and
or
to set a new
static symbol
value.
6. Set the oven function and, if necessary, the oven temperature.
The display shows the current core temperature and (which shows the relation between the set oven temperature and the current oven temperature).
The core temperature sensor must stay in the meat and in the socket during the cooking.
While the appliance calculates the approximate duration time, the value of the Count Up
Timer function shows in the Timer/Residual heat display. When the first calculation ends,
the Timer/Residual heat display shows -, and then the approximate duration of the cooking.
The appliance continues to calculate the duration during the cooking. The display updates
at intervals with the new duration value.
7. When the meat is at the set core temperature, the core temperature and
flash. An
acoustic signal sounds for two minutes.
Touch a sensor field to deactivate the acoustic signal.
8. Remove the core temperature sensor from the socket and remove the meat from the
appliance.
WARNING!
Be careful when you remove the core temperature sensor. It is hot. There is a risk of burns.
9. Deactivate the appliance.
Additional functions
19
When you put the core temperature sensor into the socket, you cancel the settings for the
clock functions.
When you cook with the core temperature sensor, you can change the temperature shown
in the Temperature/Time display. After you put the core temperature sensor in the socket
and set an oven function and temperature, the display shows the current core temperature.
Touch
again and again to see three other temperatures:
• The current core temperature
• The oven set temperature
• The current oven temperature.
The set core temperature changes into current core temperature and current oven temperature changes into set oven temperature.
Installing the Oven Accessories
The deep pan and the wire shelf have side edges.
These edges and the shape of the guide-bars causes the anti-tilt safety for the oven accessories.
Installing the wire shelf and the deep pan together
Put the wire shelf on the deep pan. Push the deep
pan between the guide-bars of one of the oven
levels.
ADDITIONAL FUNCTIONS
My Favourite Programme function
Use this function to save your favourite settings of temperature and time for an oven function or programme.
20
Additional functions
1.
2.
Set the temperature and time for an oven function or programme.
Touch and hold for more than three seconds.
An acoustic signal sounds.
3. Deactivate the appliance.
Using My Favourite Programme function:
• To activate the function touch . The appliance activates your favourite programme.
• To deactivate the function touch . The appliance deactivates your favourite programme.
When the function operates, you can change the time and temperature.
Child Lock
The Child Lock prevents an accidental operation of the appliance.
Activating and deactivating the Child Lock function:
1. Deactivate the appliance with . Do not set an oven function.
at the same time for 2 seconds. An acoustic signal sounds.
2. Touch and hold and
SAFE comes on/goes out in the display.
If the oven has Pyro Cleaning function, the door is locked.
SAFE comes on in the display when you touch a sensor field.
Control lock
You can activate the function only when the appliance operates. The Control Lock prevents
an accidental change of the oven function.
Activating/deactivating the control lock function:
1. Activate the appliance.
2. Activate an oven function or setting.
at the same time for 2 seconds. An acoustic signal sounds.
3. Touch and hold and
Loc comes on/goes out in the display.
You can deactivate the appliance when the control lock is on. When you deactivate the appliance, the control lock deactivates.
If the oven has the Pyro cleaning function, the door is locked.
Loc comes on in the display when you touch a sensor field.
Settings menu
The settings menu lets you to add or remove functions from the main menu (for example:
you can set on or off the Residual heat indicator). Settings menu has maximum eight settings (from SET1 to SET8). The number of the settings is different for different models. Look
into the table below to see the possible value of each setting.
Settings menu
Indicator of the setting menu
Description
Value to set
SET1
SET+GO
ON/OFF
Additional functions
Indicator of the setting menu
Description
Value to set
SET2
RESIDUAL HEAT INDICATOR
ON/OFF
SET3
CLEANING REMINDER
ON/OFF
SET4
KEY TONE
CLICK/BEEP/OFF
SET5
FAULTY TONE
ON/OFF
SET6
SERVICE MENU
---
SET7
RESTORE SETTINGS
YES/NO
SET81)
TIME EXTENSION
ON/OFF
21
1) Selected models only
You can set the settings menu only when the appliance is off.
Activate the Settings menu:
1. If necessary, deactivate the appliance .
2. Touch and hold for three seconds.
The display shows "SET1" and "1" flashes.
/
to set the setting.
3. Touch
.
4. Touch
/
to change the value of the setting.
5. Touch
.
6. Touch
Automatic switch-off
For safety reasons the appliance deactivates automatically after some time:
• if an oven function operates.
• if you do not change the oven temperature.
Oven temperature
Switch-off time
80 °F - 245 °F
12.5 h
250 °F - 395 °F
8.5 h
400 °F - 480 °F
5.5 h
485 °F - maximum °F
3.0 h
After an automatic switch-off, touch a sensor field to operate the appliance again.
The Automatic switch-off works with all oven functions, apart from Light, Low temperature
cooking, core temperature sensor, Duration, End, Time delay.
Brightness of the display
There are two modes of display's brightness:
• Night brightness - when the appliance is off, the brightness of the display is lower between 22:00 and 06:00;
• Day brightness:
22
Care and cleaning
– when the appliance is on;
– if you touch any of the sensor fields during night brightness (apart from ON/OFF), the
display goes back to day brightness mode for next 10 seconds;
– if the appliance is off and you set the minute minder. When the minute minder function ends, the display goes back to night brightness;
Cooling fan
When the appliance operates, the cooling fan activates automatically to keep the surfaces
of the appliance cool. If you deactivate the appliance, the cooling fan can continue to operate until the appliance cools down.
CARE AND CLEANING
WARNING!
Refer to "Safety information" chapter.
Notes on cleaning:
• Clean the front of the appliance with a soft cloth with warm water and cleaning agent.
• To clean metal surfaces use a usual cleaning agent.
• Clean the appliance interior after each use. Then you can remove dirt more easily and it
does not burn on.
• Clean stubborn dirt with a special oven cleaner.
• Clean all accessories (with a soft cloth with warm water and cleaning agent) after each
use and let them dry.
• If you have nonstick accessories, do not clean them using an aggressive agents, sharp
edged objects or dishwasher. It can cause a damage to the nonstick coating.
Pyrolytic cleaning
1.
Remove all parts from the appliance.
The pyrolytic cleaning procedure cannot start:
– If you do not remove the shelf support or telescopic runners (if present), the display
shows "C1"
– If you do not remove the core temperature sensor plug from the socket, the display
shows „C2“
– If you do not close the oven door correctly, the display shows „C3“.
2. Remove the worst of the residual dirt manually.
3. Set the Pyrolytic cleaning function (refer to "Oven functions").
to activate the Pyro cleaning function.
4. Touch
or
to set the duration of the cleaning procedure:
5. Touch
– P1 1:00 for a low degree of dirt
– P2 1:30 for a usual degree of dirt
– P3 2:30 for a high degree of dirt.
to confirm.
Touch
Care and cleaning
23
You can use the End function to delay start of the cleaning process.
During the Pyro cleaning the door is locked. The symbol and the bars of the heat indicator come up, until the door unlocks again.
The door unlocks when temperature inside the oven is under safety condition and Pyro
cleaning is finished.
During pyrolytic cleaning the lamp is off.
Cleaning reminder
To remind you that the pyrolytic cleaning is necessary the cleaning reminder symbol flashes
in the display after every deactivating the appliance for the next 10 seconds.
The cleaning reminder goes off from the display:
• After end of the pyrolytic cleaning function
• When you deactivate it in the Basic settings (refer to "Basic settings")
Shelf support
You can remove the shelf support to clean the side walls.
Removing the shelf support
1. Pull the front of the shelf support away
from the side wall.
2.
Pull the shelf support from the back of
the side wall to remove it.
To install the shelf support follow the procedure in reverse.
Valid with telescopic runners:
The retaining pins on the telescopic shelf
runners must point to the front!
Oven lamp
WARNING!
There is a risk of electrical shock.
The oven lamp and the lamp glass cover can be hot.
2
1
24
Care and cleaning
Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp
glass cover and the cavity.
Replacing the oven lamp:
1. You can find the lamp glass cover at the cavity ceiling.
Turn the lamp glass cover counterclockwise to remove it.
2. Clean the glass cover.
3. If necessary, replace the oven lamp with applicable 570 °F heat-resistant oven lamp.
Use the same oven lamp type.
4.
Install the glass cover.
Door and glass panels
To clean the door, remove it.
CAUTION!
Be careful when you remove the door from the appliance. The door is heavy!
Removing the door
1. Open the door as far as it goes.
2. Fully press clamping levers (A) on the
two door hinges.
3. Close the door until the first position
(angle approximately 70°).
4. Hold of the door with one hand on each
side and pull it away from the at an up
angle.
A
A
To install the door follow the procedure in
reverse.
The number of glass panels if different for the different models.
CAUTION!
Put the door with the outer side down on a soft and level surface to prevent scratches.
Removing and cleaning the door glass panels
1. Remove the door.
What to do if…
2.
3.
25
Hold the door trim (B) on the top edge
of the door at the two sides and push
inwards to release the clip seal.
Pull the door trim to the front to remove it.
B
4.
5.
Hold the door glass panels on their top
edge one by one and pull them up out
of the guide
Clean the door glass panels.
To install panels follow the procedure in reverse. Install the smaller panel first, then the
larger.
WHAT TO DO IF…
WARNING!
Refer to "Safety information" chapter.
Problem
Possible cause
Solution
The oven does not heat up
The appliance is deactivated
Activate the appliance
The oven does not heat up
The time of day is not set
Set the clock. Refer to "First
setting the time of day"
The oven does not heat up
The necessary settings are not
set
Make sure, the settings are correct
The oven does not heat up
The automatic switch-off is ac- Refer to „Automatic switchtivated
off“
The oven does not heat up
The fuse is released
Make sure, if the fuse is the
cause for the malfunction. If
the fuse releases again and
again, refer to an authorized
electrician
The oven lamp does not operate
The oven lamp is defective
Replace the oven lamp.
The display shows C1
You want to start the pyrolytic
cleaning but you did not remove the shelf support (or
telescopic runners).
Remove the shelf support (or
telescopic runners) from the
oven.
26
Environment concerns
Problem
Possible cause
Solution
The display shows C2
You want to start the pyrolytic
cleaning, keep warm or defrost
function but you did not remove core temperature sensor
plug from the socket.
Remove the core temperature
sensor plug from the socket.
The display shows C3
You want to start pyrolytic
cleaning but you did not close
the oven door correctly.
Close the door correctly.
The display shows F102
The door lock is defect
• Close the door correctly
• Deactivate the appliance
with the house fuse or the
safety switch in the fuse box
and activate it again
• If the display shows F102
again, refer to the Customer
Care Department
The display shows an error code There is an electronic fault
that is not in this list
• Deactivate the appliance
with the house fuse or the
safety switch in the fuse box
and activate it again
• If the display shows the error code again, refer to the
Customer Care Department
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
.........................................
.........................................
.........................................
ENVIRONMENT CONCERNS
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
Installation
27
Packaging material
The packaging material is environmentally-friendly and recyclable. Plastic parts are marked
with international abbreviations such as PE, PS, etc. Dispose of the packaging material in
the containers provided for this purpose at your local waste management facility.
INSTALLATION
WARNING!
Refer to "Safety information" chapter.
The built-in unit must meet the stability requirements of DIN 68930.
min.
3 mm
200 cm2
547
546
114
590
560 min.
20
530 min.
572
594
579
5
590 min.
567
594
21
30
28
Installation
max. R1200 mm
130
140
alternativ 100
H05VV-F
H05RR-F
min. 1600 mm
90º
Guarantee/Customer Service Centres
29
2x3,5x25
GUARANTEE/CUSTOMER SERVICE CENTRES
EURO-LINE APPLIANCES INC.
LENGTH OF WARRANTY
EURO-LINE WILL PAY FOR:
TWO YEAR FULL WARRANTY
from original date of purchase, including parts
and labour, to the first purchaser of this appliance
Replacement parts and/or labour to repair defects in materials or workmanship. Service must
be provided by an authorized Euro-Line company (unless advised otherwise).
THIS GUARANTEE DOES NOT COVER COMMERCIAL USE.
The name Euro-Line Appliances, for service matters, incorporates work performed by authorized service agents or service companies.
EXCEPTIONS:
EURO-LINE APPLIANCES WILL NOT PAY FOR THE FOLLOWING SERVICE CALLS:
1. To install or correct the installation of an appliance
2. To instruct the use of an appliance.
3. To replace house fuses, re-set circuit breakers or correct house wiring.
4. To correct house plumbing.
5. To clean drains, filters or garbage disposers.
6. To repair an appliance if it fails due to misuse or abuse.
EURO-LINE APPLIANCES WILL NOT PAY WHEN THE FOLLOWING OCCURS:
1. Damage resulting from fires, acts of God, alteration, improper installation, or installation not in accordance with local building codes.
2. Pickup or delivery of major appliances requiring service. The appliances are designed to
be repaired in the home. However, Euro-Line will not be responsible for travelling and
labour costs if the customer lives in excess of 50 km/30 miles, or if the travel time is in
excess of 30 minutes from the nearest service center. Any excess to this will not be
covered by the warranty.
In no event, will Euro-Line be responsible for incidental or consequential damages. For warranty service and parts, contact EURO-PARTS. Service will be provided during normal business hours. Should you have a service problem that is not resolved locally, contact:
30
For Service and Parts Contact:
EURO-PARTS, USA
EURO-PARTS, CANADA
EURO-LINE APPLIANCES
Tel: 1-800-561-4614
Fax: 1-519-528-5001
Tel: 1-800-678-8352
Fax: 1-519-528–5001
1-800-421-6332
Tel. Direct: 1-905-829-3980
Fax: 1-905-829-3985
User Instructions & Installation Manual
Service & Repair
To save you time and money please have the following information ready in case you have
to call for service:
• Name of the dealer from whom you purchased the appliance.
• Model number (shown on the rating plate)
• Serial number (shown on the rating plate)
• Date of purchase.
You should also retain the original purchase receipt to support any claim made under the
warranty. (We suggest you staple the receipt to this page).
If service is required, contact the Service Center:
EURO-PARTS, CANADA
EURO-PARTS, USA
Tel: 1–800–678–8352
Fax: 1-519-528-5001
Tel: 1-800-561-4614
Fax: 1-519-528-5001
DISTRIBUTED BY: EURO-LINE APPLIANCES INC.
2278 SPEERS ROAD OAKVILLE, ON, CANADA L6L 2X8 1-800-421-6332
Tel: 905-829-3980
Fax: 905-829-3985
www.euro-line-appliances.com
31
www.aeg.com/shop
892945725-H-422011
Download PDF

advertising