Aeg FSK93800P User Manual

Add to My manuals
28 Pages

advertisement

Aeg FSK93800P User Manual | Manualzz
FSK93800P
USER
MANUAL
EN
User Manual
Dishwasher
2
www.aeg.com
CONTENTS
1. SAFETY INFORMATION............................................................................................. 2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. PRODUCT DESCRIPTION...........................................................................................6
4. CONTROL PANEL....................................................................................................... 7
5. PROGRAMMES............................................................................................................7
6. SETTINGS.....................................................................................................................9
7. OPTIONS....................................................................................................................11
8. BEFORE FIRST USE................................................................................................... 13
9. DAILY USE.................................................................................................................. 15
10. HINTS AND TIPS..................................................................................................... 18
11. CARE AND CLEANING.......................................................................................... 19
12. TROUBLESHOOTING............................................................................................. 21
13. PRODUCT INFORMATION SHEET .......................................................................25
14. ADDITIONAL TECHNICAL INFORMATION.........................................................26
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
ENGLISH
3
manufacturer is not responsible for any injuries or
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away unless continuously supervised.
Children of less than 3 years of age should be kept
away unless continuously supervised.
Do not let children play with the appliance.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
•
•
•
This appliance is intended to be used in household
and similar applications such as:
– farm houses; staff kitchen areas in shops, offices
and other working environments;
– by clients in hotels, motels, bed & breakfast and
other residential type environments.
Do not change the specification of this appliance.
The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar
(MPa)
Obey the maximum number of 13 place settings.
4
www.aeg.com
•
•
•
•
•
•
•
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
Put the cutlery in the cutlery basket with the sharp
ends pointing down or put them in the cutlery drawer
in a horizontal position with the sharp edges down.
Do not leave the appliance with the open door
unattended to avoid stepping accidentally onto it.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
If the appliance has ventilation openings in the base,
they must not be covered e.g. by a carpet.
The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Install the appliance in a safe and
suitable place that meets installation
requirements.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
ENGLISH
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• This appliance complies with the
E.E.C. Directives.
• UK and Ireland only. This appliance is
fitted with a 13 A mains plug. If it is
necessary to change the mains plug
fuse, use only a 13 A ASTA (BS 1362)
fuse.
2.3 Water connection
• Do not cause damage to the water
hoses.
• Before connection to new pipes,
pipes not used for a long time, where
repair work has been carried out or
new devices fitted (water meters,
etc.), let the water flow until it is clean
and clear.
• Ensure that there are no visible water
leaks during and after the first use of
the appliance.
• The water inlet hose has a safety valve
and a sheath with an inner mains
cable.
5
• Dishwasher detergents are
dangerous. Obey the safety
instructions on the detergent
packaging.
• Do not drink and play with the water
in the appliance.
• Do not remove the dishes from the
appliance until the programme is
complete. Some detergent may
remain on the dishes.
• The appliance can release hot steam
if you open the door while a
programme operates.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
2.5 Internal lighting
WARNING!
Risk of injury.
• This appliance has an internal lamp
that comes on when you open the
door and goes off when the door is
closed.
• The type of lamp used for this
appliance is for household appliances
only. Do not use it for house lighting.
• To replace the internal lighting,
contact the Authorised Service
Centre.
2.6 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
WARNING!
Dangerous voltage.
• If the water inlet hose is damaged,
immediately close the water tap and
disconnect the mains plug from the
mains socket. Contact the Authorised
Service Centre to replace the water
inlet hose.
2.4 Use
• Do not sit or stand on the open door.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
6
www.aeg.com
3. PRODUCT DESCRIPTION
1
2
3
14
13
12
11
10
9 8
1
2
3
4
5
6
7
8
7 6
Top spray arm
Upper spray arm
Lower spray arm
Filters
Rating plate
Salt container
Air vent
Rinse aid dispenser
3.1 TimeBeam
TimeBeam displays the following
information on the floor below the
appliance door:
• The programme duration when the
programme begins.
• 0:00 and CLEAN when the
programme is completed.
• DELAY and the countdown duration
when the delay start begins.
• An alarm code when the appliance
has a malfunction.
5
9
10
11
12
13
14
4
Detergent dispenser
Comfort Lift basket
Trigger handle
Lower basket handle
Upper basket
Cutlery drawer
ENGLISH
7
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
check the remaining time of
the running programme,
look at the control panel
display.
4. CONTROL PANEL
1
2
3
6
1
2
3
4
4
5
5 OK button
6 Navigation button (down)
On/off button
Navigation button (up)
Display
Option button
4.1 Button behaviour
Navigation buttons (up and down)
• Use these buttons to scroll the lists
and information texts on the display.
Option button
• Short press to open the option list.
• Short press in the option list to return
to the programme list.
• Short press in the settings list to
return to the option list.
• Long press (3 sec.) when a delay start
or a programme is running to cancel
the delay start, the programme and
options. The display shows the default
programme: ECO 50°.
OK button
• Short press to confirm the selection of
the programme, options and settings.
• Long press (3 sec.) to start the
MyFavourite programme. If no
programme has been saved, the
display shows: Set MyFavourite.
5. PROGRAMMES
Programme
Degree of soil
Type of load
Programme phases
ECO 50° 1)
• Normal soil
• Prewash
• Crockery and cut- • Wash 50 °C
lery
• Rinses
• Dry
Options
• Extra Hygiene
• XtraDry
8
www.aeg.com
Programme
Degree of soil
Type of load
Programme phases
Options
AutoSense
• All
• Crockery, cutlery,
pots and pans
• Prewash
• Wash from 45 °C
to 70 °C
• Rinses
• Dry
• Extra Hygiene
• XtraDry
• Prewash
• Wash 50 °C and
65 °C
• Rinses
• Dry
• TimeSaver
• XtraDry
•
•
•
•
Prewash
Wash 70 °C
Rinses
Dry
• Extra Hygiene
• TimeSaver
• XtraDry
• Wash 60 °C
30 Minutes 60° 5) • Fresh soil
• Crockery and cut- • Rinses
lery
• Extra Hygiene
• XtraDry
45°-70° 2)
ProZone 50°-65° 3)• Mixed soil
• Crockery, cutlery,
pots and pans
Pro 70° 4)
• Heavy soil
• Crockery, cutlery,
pots and pans
Glass 45°6)
• Normal or light
soil
• Delicate crockery
and glassware
• Wash 45 °C
• Rinses
• Dry
• XtraDry
Extra Silent 7)
• Normal soil
• Prewash
• Crockery and cut- • Wash 50 °C
lery
• Rinses
• Dry
• XtraDry
Prewash 8)
• All
• Prewash
1) This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes.
2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of water as well as the wash duration.
3) This programme is suitable for washing a load with mixed soil. Place items with heavy soil in the lower
basket and with normal soil in the upper basket. The pressure and temperature of the water in the lower
basket are higher than in the upper basket.
4) This programme is designed to wash heavily soiled items with high water pressure and at a high temperature.
5) This programme is suitable for washing a load or a half load with fresh or light soil in a short time.
6) This programme controls the temperature of the water to provide special care for delicate items,
glassware in particular.
7) This is the most silent programme. The wash pump works at a very low speed to reduce the noise
generated by the appliance. Due to the low speed, the programme duration is long.
8) With this programme, you can quickly rinse off food remains from dishes and prevent odours forming
in the appliance. Do not use detergent with this programme.
ENGLISH
9
5.1 Consumption values
Water
(l)
Energy
(kWh)
Duration
(min)
11
0.832
235
AutoSense 45°-70°
8 - 15
0.7 - 1.7
46 - 170
ProZone 50°-65°
14 - 16
1.2 - 1.5
160 - 180
12.5 - 14.5
1.4 - 1.7
170 - 190
10
0.9
30
Glass 45°
12 - 14
0.8 - 1.0
82 - 92
Extra Silent
12 - 13
1.1 - 1.3
230 - 250
4
0.1
14
Programme 1)
ECO 50°
Pro 70°
30 Minutes 60°
Prewash
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
[email protected]
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6. SETTINGS
6.1 Setting list
Settings
Values
Description
Set MyFavourite
List of programmes
Set your favourite daily programme. Refer to specific information provided in this
chapter.
AirDry
ON
OFF
Set the automatic opening
of the door during the drying
phase. Refer to specific information provided in this
chapter.
Factory setting: ON.
End sound
ON
OFF
Set the acoustic signal that
sounds when the programme is complete.
Factory setting: OFF.
10
www.aeg.com
Settings
Values
Description
Key tones
Click
Beep
Off
Set the sound of the buttons
when pressed.
Volume
From level 1 to level 10 Adjust the sound volume.
Brightness
From level 0 to level 9
Adjust the brightness of the
display.
Contrast
From level 0 to level 9
Adjust the contrast of the
display.
Water hardness
From level 1 to level 10 Adjust the level of the water
softener according to the
water hardness in your area.
Factory setting: level 5.
Rinse aid level
From level 0 to level 6
Level 0 = no release of
rinse aid
Adjust the released quantity
of the rinse aid according to
the required dosage.
Factory setting: level 4.
Languages
List of languages
Set the preferred language.
Default language: English.
Display on floor
White
None
Activate or deactivate the
TimeBeam.
Factory setting: White.
Reset settings
Reset
Cancel
Reset the appliance to the
factory settings.
6.2 How to change a setting
with 2 values (ON and OFF)
6.3 How to change a setting
with multiple values
Saved settings remain valid until you
change them again.
Saved settings remain valid until you
change them again.
1. Press .
The display shows the option list.
1. Press .
The display shows the option list.
2. Select Settings and press
.
The display shows the setting list.
2. Select Settings and press
.
The display shows the setting list.
to
3. Select a setting and press
change the setting value.
• The setting value changes from
ON to OFF or vice versa.
• The display remains in the
settings list.
3. Select a setting and press
enter the setting.
4. Press
repeatedly until the display
shows the programme list.
4. Use
and
setting value.
to
to change the
5. Press
to save the setting.
The display returns to the setting list.
repeatedly until the display
6. Press
shows the programme list.
ENGLISH
11
6.4 How to save the
MyFavourite programme
You can save your favourite programme
along with applicable options. It is not
possible to save the MyFavourite
programme with the Delay option.
You can save one programme at a time.
A new setting cancels the previous one.
1. Press .
The display shows the option list.
.
2. Select Settings and press
The display shows the setting list.
3. Select Set MyFavourite and press
.
The display shows the programme list.
.
4. Select a programme and press
The display shows two values.
• Add option: select the value to
add an option to the programme.
• Done: select the value to save the
programme without options or to
finish adding options to the
programme.
.
5. Press
If the programme is applicable to the
TimeSaver option, the display shows two
values with corresponding programme
durations.
• Fast: select the value to activate
TimeSaver.
• Normal: select the value to
deactivate TimeSaver.
to confirm.
6. Press
The display confirms that the
MyFavourite programme is saved.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3
minutes, the running
programme ends.
AirDry is automatically activated with all
programmes excluding Prewash (if
applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
12
www.aeg.com
7.1 Option list
Options
Values
Description
Delay
From 1 to 24 hours
OFF (default value)
Delays the start of a programme.
XtraDry
ON
OFF (default value)
Boosts the drying performance. Refer to specific information provided in this
chapter.
Extra Hygiene
ON
OFF (default value)
Ensures better hygiene results by keeping the temperature at 70 °C for at least 10
minutes during the last rinsing phase.
Settings
Shows the appliance settings
7.2 How to set an option
7.3 XtraDry
The option list shows only the options
that are applicable to the selected
programme.
Activate this option to boost the drying
performance.
Not all options are compatible with each
other. If you select options that are not
compatible, the appliance automatically
deactivates one or more of them. The
display informs which options are
deactivated.
When the programme is complete or
cancelled, the options are set to the
default values.
1. Select a programme.
2. Press .
The display shows applicable options.
3. Select an option.
The display shows the default option
value in parenthesis.
to change the value from
4. Press
OFF to ON or vice versa.
If you select Delay and press
, the
display shows the number of hours
available for the delay start. Select the
desired delay time and press
confirm.
to
repeatedly until the display
5. Press
shows the selected programme.
XtraDry is a permanent option for all
programmes other than ECO 50°. It is
automatically activated in next cycles.
This configuration can be changed at any
time.
Every time ECO 50° is
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates TimeSaver
and vice versa.
7.4 TimeSaver
TimeSaver allows to reduce the duration
of a selected programme by
approximately 50%.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
Activate TimeSaver the following way:
Select a programme and press
.
ENGLISH
If TimeSaver is applicable to the selected
programme, the display shows two
values with corresponding programme
durations.
• Fast: select the value to activate
TimeSaver and press
confirm.
to
13
• Normal: select the value to
deactivate TimeSaver and press
to confirm.
Activating TimeSaver deactivates XtraDry
and vice versa.
8. BEFORE FIRST USE
When you activate the appliance for the
first time, you need to set the language.
The default language is English.
1. Set the language.
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
8.1 The water softener
• Press
to confirm English.
• Select a different language and
to confirm.
press
2. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
3. Fill the salt container.
4. Fill the rinse aid dispenser.
5. Open the water tap.
6. Start a programme to remove any
residuals from the manufacturing
process. Do not use detergent and
do put dishes in the baskets.
After starting the programme, the
appliance recharges the resin in the
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
Water hardness
German degrees (°dH)
French degrees
(°fH)
mmol/l
Clarke degrees
Water softener level
47 - 50
84 - 90
8.4 - 9.0
58 - 63
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
5 1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
2
14
www.aeg.com
German degrees (°dH)
French degrees
(°fH)
mmol/l
Clarke degrees
Water softener level
<4
<7
<0.7
<5
1 2)
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill notification
active.
Multi-tabs containing salt
are not effective enough to
soften hard water.
4. Carefully shake the funnel by its
handle to get the last granules
inside.
5. Remove the salt around the opening
of the salt container.
8.2 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
Make sure that the Comfort
Lift basket is empty and
locked in the raised position.
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with dishwasher
salt (until it is full).
6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
When the salt container
needs refilling, the display
shows the related message.
8.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
ENGLISH
How to fill the rinse aid
dispenser
A
B
15
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (A) is
clear.
When the rinse aid
dispenser needs refilling, the
display shows the related
message.
C
CAUTION!
Only use rinse aid designed
specifically for dishwashers.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse
aid reaches the marking ''MAX''.
If you use multi-tablets and the drying
performance is satisfactory, the message
about refilling the dispenser can be
disabled by setting the rinse aid level to
0.
We recommend to always
use rinse aid for better
drying performance, also in
combination with multitablets containing rinsing
agent.
9. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
• Fill the salt container if the display
shows the related message.
• Fill the rinse aid dispenser if the
display shows the related
message.
3. Load the baskets.
4. Add the detergent.
5. Set and start a programme suitable
for the type of load and the degree
of soil.
9.1 Comfort Lift
CAUTION!
Do not sit on the rack or put
excessive pressure on the
locked basket.
CAUTION!
Do not exceed the max load
capacity of 18 kg.
CAUTION!
Make sure that items do not
stick out of the basket frame
as it can cause damage to
the items and the Comfort
Lift mechanism.
The Comfort Lift mechanism allows to lift
the lower rack up (to the second rack
level) and put it down to load and unload
dishes easily.
To load or unload the lower basket:
1. Lift the basket by pulling the rack out
of the dishwasher by the basket
handle. The trigger handle should
not be used.
16
www.aeg.com
9.2 Using the detergent
A
The basket is automatically locked on the
upper level.
2. Carefully place items in the basket or
remove them (refer to Basket
loading leaflet).
3. Lower the basket by connecting the
trigger handle with the basket frame
as shown below. Lift the trigger
handle completely and the basket
handle slightly until the basket is
disengaged on both sides.
Once the basket is unlocked, push
the rack down. The mechanism
returns to its default position on the
lower level.
There are two ways of lowering the
basket depending on the loading:
• If there is a full load of plates,
slightly push the basket down.
• If the basket is empty or halfloaded, press the basket down.
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.3 Setting and starting a
programme
How to start a programme
1. Press the on/off button to activate
the appliance.
The display shows the programme list.
2. Select a programme. ECO 50° is
always the default programme.
3. Set applicable options if desired.
Once you set options, return to the
programme list.
.
4. Press
If the programme is applicable to the
TimeSaver option, the display shows two
values with corresponding programme
durations.
• Fast: select the value to activate
TimeSaver and press
confirm.
to
ENGLISH
• Normal: select the value to
deactivate TimeSaver and press
to confirm.
5. Close the appliance door to start the
programme.
How to start the MyFavourite
programme
1. Press and hold
for about 3
seconds until the display shows the
MyFavourite programme.
2. Close the appliance door to start the
programme.
How to delay the start of a
programme
It is not possible to set the delay start of
the MyFavourite programme.
1. Select a programme.
2. Press .
The display shows the option list.
3. Select Delay and press
.
The display shows the number of hours
available for the delay start (from 1 to 24).
4. Select the desired number of hours
to confirm.
and press
The display returns to the option list.
5. You can set other applicable options.
repeatedly until the display
6. Press
shows the selected programme.
to confirm the
7. Press
programme selection.
8. Close the appliance door to start the
countdown.
When the countdown is completed, the
programme starts.
How to cancel the delay start
while the countdown operates
The programme and options are set to
their default values when you cancel the
delay start.
1. Open the appliance door.
for about 3
2. Press and hold
seconds. The display shows: Stop
washing? and two values.
17
• Stop: select the value to cancel
the delay start. Press
to
confirm.
• Resume: select the value to
resume the countdown. Press
to confirm. Close the
appliance door.
How to cancel the running
programme
1. Open the appliance door.
2. Press and hold
for about 3
seconds. The display shows: Stop
washing? and two values.
• Stop: select the value to cancel
the running programme. Press
to confirm.
• Resume: select the value to
resume the running programme.
to confirm. Close the
Press
appliance door.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry
function.
End of the programme
When the programme is complete, the
TimeBeam displays 0:00 and CLEAN.
1. Press the on/off button or wait for
the Auto Off function to
automatically deactivate the
appliance. If you open the door
before the activation of Auto Off, the
18
www.aeg.com
appliance is automatically
deactivated.
2. Close the water tap.
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
10. HINTS AND TIPS
10.1 General
Follow the hints below to ensure optimal
cleaning and drying results in daily use
and to help you protect the environment.
• Remove larger residues of food from
the dishes into the waste bin.
• Do not pre-rinse dishes by hand.
When needed, select a programme
with a prewash phase.
• Always use the whole space of the
baskets.
• Make sure that items in the baskets
do not touch or cover each other.
Only then can the water completely
reach and wash the dishes.
• You can use dishwasher detergent,
rinse aid and salt separately or you
can use the multi-tablets (e.g. ''All in
1''). Follow the instructions on the
packaging.
• Select a programme according to the
type of load and the degree of soil.
ECO 50° offers the most efficient use
of water and energy consumption.
10.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
• In areas with hard and very hard water
we recommend to use plain
dishwasher detergent (powder, gel,
tablets containing no additional
agents), rinse aid and salt separately
for optimal cleaning and drying
results.
• At least once a month run the
appliance with the use of appliance
cleaner which is particularly suitable
for this purpose.
• Detergent tablets do not fully dissolve
with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use the
tablets with long programmes.
• Do not use more than the correct
quantity of detergent. Refer to the
instructions on the detergent
packaging.
10.3 What to do if you want to
stop using multi-tablets
Before you start to use separately
detergent, salt and rinse aid, complete
the following steps:
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
4. When the programme is completed,
adjust the water softener according
to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
10.4 Loading the baskets
• Use the appliance to wash
dishwasher-safe items only.
• Do not wash in the appliance items
made of wood, horn, aluminium,
pewter and copper.
• Do not wash in the appliance items
that can absorb water (sponges,
household cloths).
• Remove large food residues from
dishes.
• Soak cookware with burnt-on food
before washing it in the appliance.
• Put hollow items (cups, glasses and
pans) with the opening facing
downwards.
ENGLISH
19
• Make sure that glasses do not touch
each other.
• Put light items in the upper basket.
Make sure that the items do not move
freely.
• Put cutlery and small items in the
cutlery drawer.
• Make sure that the spray arms can
move freely before you start a
programme.
• There is enough salt and rinse aid
(unless you use multi-tablets).
• The arrangement of the items in the
baskets is correct.
• The programme is suitable to the
type of load and the degree of soil.
• The correct quantity of detergent is
used.
10.5 Before starting a
programme
1. Let the tableware cool down before
you remove it from the appliance.
Hot items can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
Before you start the selected
programme, make sure that:
10.6 Unloading the baskets
After the programme is
completed, water can still
remain on the inside
surfaces of the appliance.
• The filters are clean and correctly
installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
11. CARE AND CLEANING
WARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.
Make sure that the Comfort
Lift basket is empty and
locked in the raised position.
Dirty filters and clogged
spray arms decrease the
washing results. Make a
check regularly and, if
necessary, clean them.
11.1 Cleaning the filters
The filter system is made of 3 parts.
C
B
A
1. Turn the filter (B) counterclockwise
and remove it.
20
www.aeg.com
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.
11.2 Cleaning the upper spray
arm
We recommend to clean the upper spray
arm regularly to prevent soil from
clogging the holes.
Clogged holes can cause unsatisfactory
washing results.
1. Pull out the upper basket.
2. To detach the spray arm from the
basket, press the spray arm upwards
and simultaneously turn it clockwise.
5. Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter (A).
Make sure that it is correctly
positioned under the 2 guides.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.
7. Reassemble the filters (B) and (C).
ENGLISH
21
11.3 External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products,
abrasive cleaning pads or solvents.
11.4 Internal cleaning
4. To install the spray arm back, press
the spray arm upwards and
simultaneously turn it
counterclockwise until it locks into
place.
• Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
• To maintain the performance of your
appliance, use a cleaning product
designed specifically for dishwashers
at least once a month. Carefully follow
the instructions on the packaging of
the product.
• Do not use abrasive products,
abrasive cleaning pads, sharp tools,
strong chemicals, scourer or solvents.
• Using short-duration programmes
regularly can cause grease and
limescale buildup inside the
appliance. Run long-duration
programmes at least twice a month to
prevent the buildup.
12. TROUBLESHOOTING
WARNING!
Improper repair of the
appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
to contact an Authorised Service
Centre.
Refer to the below table for information
on possible problems.
With some problems, the display shows a
message.
The majority of problems that may
occur can be solved without the need
Problem
Possible cause and solution
You cannot activate the appliance.
• Make sure that the mains plug is connected to the
mains socket.
• Make sure that there is no damaged fuse in the fuse
box.
22
www.aeg.com
Problem
Possible cause and solution
The programme does not
start.
• Make sure that the appliance door is closed.
The appliance does not fill
with water.
The display shows the message: Appliance is not filling water.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not
too low. For this information, contact your local water
authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clogged.
• Make sure that the inlet hose has no kinks or bends.
The appliance does not
drain the water.
The display shows the message: Appliance is not
draining water.
• Make sure that the sink spigot is not clogged.
• Make sure that the filter in the outlet hose is not clogged.
• Make sure that the interior filter system is not clogged.
• Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows the message: Appliance is flooding
or has an error in the water inlet.
• Close the water tap and contact an Authorised Service
Centre.
• Press
.
• If the delay start is set, cancel the setting or wait for the
end of the countdown.
• The appliance recharges the resin inside the water softener. The duration of the procedure is approximately 5
minutes.
The appliance stops and
• It is normal. It provides optimal cleaning results and enstarts more times during opergy savings.
eration.
The programme lasts to
long.
• If the delay start is set, cancel the delay setting or wait
for the end of the countdown.
• Activate the TimeSaver option to reduce the programme duration.
• Activating options can increase the programme duration.
The remaining time in the
display increases and skips
nearly to the end of the programme duration.
• This is not a defect. The appliance is working correctly.
Small leak from the appliance door.
• The appliance is not levelled. Loosen or tighten the adjustable feet (if applicable).
• The appliance door is not centred on the tub. Adjust the
rear foot (if applicable).
The appliance door is difficult to close.
• The appliance is not levelled. Loosen or tighten the adjustable feet (if applicable).
• Parts of the tableware are protruding from the baskets.
ENGLISH
23
Problem
Possible cause and solution
Rattling or knocking sounds
from the inside of the appliance.
• The tableware is not properly arranged in the baskets.
Refer to basket loading leaflet.
• Make sure that the spray arms can rotate freely.
The appliance trips the circuit-beaker.
• The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the appliances in use.
• Internal electrical fault of the appliance. Contact an Authorised Service Centre.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For other messages or problems not
described in the table, contact an
Authorised Service Centre.
12.1 The washing and drying results are not satisfactory
Problem
Possible cause and solution
Poor washing results.
• Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
• Use more intensive washing programmes.
• Clean spray arm jets and the filter. Refer to "Care and
Cleaning".
Poor drying results.
• Tableware has been left for too long inside the closed
appliance.
• There is no rinse aid or the dosage of rinse aid is not
sufficient. Adjust the rinse aid level to a higher level.
• Plastic items may need to be towel dried.
• For the best drying performance, activate XtraDry and
AirDry.
• We recommend to always use rinse aid, even in combination with multi-tablets.
There are whitish streaks or
bluish layers on glasses and
dishes.
• The released quantity of rinse aid is too high. Adjust
the rinse aid level to a lower level.
• The quantity of detergent is too high.
There are stains and dry water
drops on glasses and dishes.
• The released quantity of rinse aid is not sufficient. Adjust the rinse aid level to a higher level.
• The quality of the rinse aid can be the cause.
24
www.aeg.com
Problem
Possible cause and solution
The dishes are wet.
• For the best drying performance, activate XtraDry and
AirDry .
• The programme does not have a drying phase or has
a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a
different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.
The interior of the appliance is • This is not a defect of the appliance. Humid air conwet.
densates on the appliance walls.
Unusual foam during washing. • Use the detergent designed specifically for dishwashers.
• There is a leak in the rinse aid dispenser. Contact an
Authorised Service Centre.
Traces of rust on cutlery.
• There is too much salt in the water used for washing.
Refer to "The water softener".
• Silver and stainless steel cutlery were placed together.
Avoid putting silver and stainless steel items close together.
There are residues of detergent in the dispenser at the
end of the programme.
• The detergent tablet got stuck in the dispenser and
was not completely washed away by water.
• Water cannot wash away the detergent from the dispenser. Make sure that the spray arm is not blocked or
clogged.
• Make sure that items in the baskets do not impede the
lid of the detergent dispenser from opening.
Odours inside the appliance.
• Refer to "Internal cleaning".
Limescale deposits on the tableware, on the tub and on
the inside of the door.
• The level of salt is low. After you activate the appliance, check the display for the salt refill notification.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to "The water softener".
• Use salt and set regeneration of the water softener
even when multi-functional tablets are used. Refer to
"The water softener".
• If lime scale deposits still remain, clean the appliance
with appliance cleaners which are particularly suitable
for this purpose.
• Try a different detergent.
• Contact the detergent manufacturer.
ENGLISH
25
Problem
Possible cause and solution
Dull, discoloured or chipped
tableware.
• Make sure that only dishwasher-safe items are washed
in the appliance.
• Load and unload the basket carefully. Refer to basket
loading leaflet.
• Place delicate items in the upper basket.
• For washing delicate items and glassware, select the
dedicated programme. Refer to "Programmes".
Refer to "Before first use",
"Daily use" or "Hints and
tips" for other possible
causes.
13. PRODUCT INFORMATION SHEET
Trade Mark
AEG
Model
FSK93800P
Rated capacity (standard place settings)
13
Energy efficiency class
A+++
Energy consumption in kWh per year, based on 280 standard clean- 234
ing cycles using cold water fill and the consumption of the low power
modes. The actual energy consumption will depend on how the appliance is used.
Energy consumption of standard cleaning cycle (kWh)
0.832
Power consumption in off mode (W)
0.10
Power consumption in left-on mode (W)
5.0
Water consumption in litres per year, based on 280 standard clean3080
ing cycles. The actual water consumption will depend on how the appliance is used
Drying efficiency class on a scale from G (least efficient) to A (most
efficient)
A
The ‘standard programme’ is the standard cleaning cycle to which
the information in the label and the fiche relates. This programme is
suitable to clean normally soiled tableware and is the most efficient
programme in terms of combined energy and water consumption. It
is indicated as "Eco" programme.
ECO 50°
Programme time of standard cleaning cycle (min)
235
Duration of the left-on mode (min)
5
Sound power level (db(A) re 1pW)
39
Built in appliance Y/N
Yes
26
www.aeg.com
14. ADDITIONAL TECHNICAL INFORMATION
Dimensions
Width / height / depth (mm)
596 / 818 - 898 / 550
Electrical connection 1)
Voltage (V)
200 - 240
Frequency (Hz)
50 / 60
bar (minimum and maximum)
0.5 - 8
MPa (minimum and maximum)
0.05 - 0.8
Cold water or hot water 2)
max 60 °C
Water supply pressure
Water supply
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to
decrease energy consumption.
15. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
*
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH
27
117883333-A-402018
www.aeg.com/shop

advertisement

Related manuals

Download PDF

advertisement