AEG | F77000W0P/AU | User manual | Aeg F77000M0P/AU User Manual

Aeg F77000M0P/AU User Manual
FAVORIT 77000 W0P/AU
FAVORIT 77000 M0P/AU
EN User manual
2
www.aeg.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading to get
the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.aeg.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INSTRUCTIONS
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.
•
•
•
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included,
with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or
instruction for the operation of the appliance by a person who is responsible
for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the
appliance door when it is open.
1.2 Installation
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Do not drill into the sides of the appliance otherwise damage to hydraulic
and electrical components may occur.
•
•
•
•
the power supply. If not, contact an
electrician.
Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be replaced, this must be carried out by our
Service centre.
Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
Do not touch the mains cable or the
mains plug with wet hands.
Test the appliance. Run a quick washing program and ensure that the appliance fills with water, washes and
drains with no leaks.
Water connection
• Make sure not to cause damage to the
water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
• The water inlet hose has a safety valve
and a sheath with an inner mains cable.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees with
WARNING!
Dangerous voltage.
4
www.aeg.com
• If the water inlet hose is damaged, immediately disconnect the mains plug
from the mains socket. Contact the
Service to replace the water inlet hose.
1.3 Use
• This appliance is intended to be used
in household and similar applications
such as:
– Farm houses.
– By clients in hotels, motels and other residential type environments.
– Bed and breakfast type environments.
WARNING!
Risk of injury, burns, electrical
shock or fire.
• Do not change the specification of this
appliance.
• Put knives and cutlery with sharp
points in the cutlery basket with the
points down or in a horizontal position.
• The appliance can release hot steam if
you open the door while a program
operates.
• Do not keep the appliance door open
without supervision to prevent to fall
on it.
• Do not sit or stand on the open door.
• Obey the safety instructions from the
manufacturer of the dishwasher deter-
•
•
•
•
•
•
•
gent to prevent burns to eyes, mouth
and throat.
Only put detergent in the dispenser
before you start a program.
Check that the detergent dispenser is
empty after completion of the program.
Do not drink and play with the water in
the appliance.
Do not remove the dishes from the
appliance until the program is completed. There can be detergent on the
dishes.
Make sure the dispenser is empty after
the completion of the program.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not use water spray and steam to
clean the appliance.
1.4 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
ENGLISH
2. PRODUCT DESCRIPTION
2
1
3
4
13
12
11
10 9
8
7
6
5
1 Worktop
8 Air vent and water hardness dial
2 Top spray arm
9 Rinse aid dispenser
3 Upper spray arm
4 Lower spray arm
10 Detergent dispenser
5 Filters
12 Lower basket
6 Rating plate
13 Upper basket
7 Salt container
11 Cutlery basket
5
6
www.aeg.com
3. CONTROL PANEL
1
2
3
8
7
4
5
6
1 On/off button
5 Delay button
2 Program button
6 Option button
3 Program indicators
7 Indicators
4 Display
8 Start button
Indicators
Description
ExtraHygiene indicator.
Multitab indicator.
Washing phase indicator. It comes on when the washing phase
operates.
Rinsing phase indicator. It comes on when the rinsing phases
operate.
Drying phase indicator. It comes on when the drying phase operates.
End indicator. It comes on when the program is completed.
Door indicator. It comes on when the appliance door is open
or is not correctly closed.
Delay indicator.
Rinse aid indicator. It is always off while the program operates.
Salt indicator. It is always off while the program operates.
ENGLISH
7
4. PROGRAMS
Program
Degree of soil
Type of load
Program
phases
Options
All
Crockery, cutlery,
pots and pans
Prewash
Wash 45 °C or 70 °C
Rinses
Dry
ExtraHygiene
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
3)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
4)
Fresh soil
Crockery and cutlery
Wash 60 °C
Rinse
ExtraHygiene
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
ExtraHygiene
Normal soil
Crockery and cutlery
Wash 55 °C
Rinses
Dry
ExtraHygiene
All
Prewash
1)
2)
5)
6)
1) The appliance senses the degree of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy
consumption and the program duration.
2) This program has a high temperature rinsing phase for better hygiene results. During
the rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
3) This is the most silent program. The pump works at a very low speed to decrease the
level of noise. Because of the low speed, the program duration is long.
4) With this program you can wash a load with fresh soil. It gives good washing results in a
short time.
5) With this program you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard program for test institutes).
6) Use this program to quickly rinse the dishes. This prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance.
Do not use detergent with this program.
Consumption values
Program 1)
Duration
(min)
Energy
(kWh)
Water
(l)
90 - 160
0.9 - 1.7
8 - 15
140 - 160
1.5 - 1.6
13 - 14
8
www.aeg.com
Program 1)
Duration
(min)
Energy
(kWh)
Water
(l)
200 - 220
1.1 - 1.2
9 - 11
30
0.9
9
147 - 161
0.79 - 0.96
10.4 - 12.6
50 - 60
1.0 - 1.2
10 - 11
14
0.05
4
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
ENGLISH
9
5. OPTIONS
Activate or deactivate the options before the start of a program. You cannot activate or deactivate the options while a program operates.
If one or more options are set,
make sure that the related indicators are on before the program
starts.
5.1 ExtraHygiene
With this option you have better hygiene
results. During the rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.
How to activate the ExtraHygiene
option
1. Press Option until the ExtraHygiene
indicator comes on. In the display
you can see the update of the program duration.
• If the option is not applicable to
the program, the related indicator
does not come on.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The program duration can increase.
How to activate the Multitab option
1. Press Option until the Multitab indicator comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest program with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
5.2 Multitab
Activate this option only when you use
the combi detergent tablets.
6. BEFORE FIRST USE
1. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a program to remove
them. Do not use detergent and do
not load the baskets.
10 www.aeg.com
6.1 Adjusting the water softener
Water softener
adjustment
Water hardness
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Electronic
47 - 50
84 - 90
8.4. - 9.0
58 - 63
2 1)
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
2 1)
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
21)
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
21)
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
21)
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
21)
51)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
1
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
1
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
<4
<7
< 0.7
<5
12)
12)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.
Electronic adjustment
1. Press the on/off button to activate
the appliance. Make sure that the appliance is in setting mode, refer to
“Setting and starting a program”.
2. Press and hold, at the same time, Delay and Start until the indicators of
,
and
start to flash.
3. Press Program,
• The indicators of
and
go off.
• The indicator of
continues to flash.
• The display shows the current setting of the water softener, e.g.
= level 5.
4. Press Program again and again to
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the setting.
Manual adjustment
Turn the water hardness dial to the position 1 or 2.
ENGLISH
11
6.2 Filling the salt container
1.
2.
3.
4.
5.
Turn the cap counterclockwise and
open the salt container.
Put 1 litre of water in the salt container (only for the first time).
Fill the salt container with dishwasher salt.
Remove the salt around the opening
of the salt container.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out
from the salt container when you
fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a program.
6.3 Filling the rinse aid dispenser
1.
Press the release button (D) to open
the lid (C).
2. Fill the rinse aid dispenser (A), no
more than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the release button locks into position.
B
A
M AX
4
3 2
1
+
-
C
D
You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 (highest quantity).
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the appliance is in setting mode, refer to
“Setting and starting a program”.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent
tablets, activate the Multitab option.
5. Set and start the correct program for
the type of load and the degree of
soil.
12 www.aeg.com
7.1 Using the detergent
A
1.
B
2.
30
3.
4
MAX
+
32
-
1
20
4.
C
7.2 Setting and starting a
program
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
Press the on/off button to activate the
appliance. The appliance is in setting
mode when all the program indicators
come on and the display shows 2 horizontal status bars.
If the control panel does not show this
condition, press and hold at the same
time Delay and Start until the appliance
is in setting mode.
Starting a program without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the appliance is in setting mode.
3. Close the appliance door.
4. Press Program again and again until
the indicator of the program you
want to set comes on. You can also
set the applicable options.
• The duration of the program flashes in the display.
• The indicators of the phases that
are foreseen for the program come
on.
5. Press Start to start the program.
• When the program starts, only the
indicator of the running phase
stays on.
5.
Press the release button (B) to open
the lid (C).
Put the detergent in the compartment (A) .
If the program has a prewash phase,
put a small quantity of detergent on
the inner part of the appliance door.
If you use detergent tablets, put the
tablet in the compartment (A).
Close the lid. Make sure that the release button locks into position.
• The program duration starts to decrease with steps of 1 minute.
Starting a program with delay
start
1. Set the program.
2. Press Delay again and again until the
display shows the delay time you
want to set (from 1 to 24 hours).
• The Delay indicator comes on.
• The delay time flashes in the display.
• The indicators of the phases that
are foreseen for the program go
off.
3. Press Start to start the countdown.
• The countdown starts to decrease
with steps of 1 hour.
When the countdown is completed, the
program starts. The indicator of the running phase comes on.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the appliance continues from the point of interruption.
Cancelling the delay start
while the countdown operates
When you cancel the delay start, also the
program is cancelled.
1. Press and hold, at the same time, Delay and Start until all the program in-
ENGLISH
dicators come on and the display
shows 2 horizontal status bars.
2. Set the program again.
Cancelling the program
1. Press and hold, at the same time, Delay and Start until all the program indicators come on and the display
shows 2 horizontal status bars.
Make sure that there is detergent
in the detergent dispenser before you start a new program.
13
Important
• For better drying results, keep the
door ajar for some minutes before you
remove the dishes.
• Let the dishes become cold before
you remove them from the appliance.
Hot dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and
on the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
At the end of the program
The display shows 0 and the end indicator comes on.
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
If you do not press the on/off
button, the Auto Off function automatically deactivates the appliance a few minutes after the end
of the program.
This helps to decrease the energy consumption,
8. HINTS AND TIPS
8.1 The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water
softener clean and in good conditions. It
is important to set the right level of the
water softener. This makes sure that the
water softener uses the correct quantity
of dishwasher salt and water.
8.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
• The rinse aid helps, during the last
rinsing phase, to dry the dishes without streaks and stains.
• Combi detergent tablets contain detergent, rinse aid and other added
agents. Be sure that these tablets are
applicable to the water hardness in
your area. Refer to the instructions on
the packaging of the products.
• Detergent tablets do not fully dissolve
with short programs. To prevent detergent residues on the tableware, we
recommend that you use the tablets
with long programs.
Do not use more than the correct
quantity of detergent. Refer to
the instructions on the detergent
packaging.
14 www.aeg.com
8.3 Loading the baskets
Refer to the supplied leaflet with
examples of the load of the baskets.
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items
made of wood, horn, aluminium, pewter and copper.
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove remaining food from the
items.
• To remove easily remaining burned
food, soak pots and pans in water before you put them in the appliance.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that cutlery and dishes do
not bond together. Mix spoons with
other cutlery.
• Make sure that glasses do not touch
other glasses.
• Put the small items in the cutlery basket.
• Put the light items in the upper basket. Make sure that they do not move.
• Make sure that the spray arms can
move freely before you start a program.
8.4 Before starting a program
Make sure that:
• The filters are clean and correctly installed.
• The spray arms are not clogged.
• The position of the items in the baskets is correct.
• The program is applicable for the type
of load and for the degree of soil.
• The correct quantity of detergent is
used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tablets).
• The cap of the salt container is tight.
9. CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains socket.
Dirty filters and clogged spray
arms decrease the washing results.
Make a check regularly and, if
necessary, clean them.
9.1 Cleaning the filters
1.
C
C
B
A
Turn the filter (A) counterclockwise
and remove it.
ENGLISH
2.
3.
4.
5.
A1
A2
6.
7.
15
To disassemble the filter (A), pull
apart (A1) and (A2).
Remove the filter (B).
Wash the filters with water.
Before you put the filter (B) back,
make sure that there are no residues
of food or soil in or around the edge
of the sump.
Make sure that the filter (B) is correctly positioned under the 2 guides
(C).
Assemble the filter (A) and put it
back in filter (B). Turn it clockwise
until it locks.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
9.2 Cleaning the spray arms
9.4 Internal cleaning
Do not remove the spray arms.
If the holes in the spray arms are clogged, remove remaining parts of soil with
a thin pointed object.
If you regularly use short duration programs, these can leave deposits of
grease and limescale inside the appliance.
To prevent this, we recommend to run
long duration programs at least 2 times
per month.
9.3 External cleaning
Clean the appliance with a moist soft
cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning
pads or solvents.
10. TROUBLESHOOTING
The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solution to the problem.
With some problems, the display
shows an alarm code:
•
- The appliance does not fill with
water.
•
- The appliance does not drain
the water.
•
- The anti-flood device is on.
WARNING!
Deactivate the appliance before
you do the checks.
Problem
Possible solution
You cannot activate the appliance.
Make sure that the mains plug is connected
to the mains socket.
16 www.aeg.com
Problem
Possible solution
Make sure that there is not a damaged fuse
in the fuse box.
The program does not start.
Make sure that the appliance door is closed.
Press Start.
If the delay start is set, cancel the setting or
wait for the end of the countdown.
The appliance does not fill with
water.
Make sure that the water tap is open.
Make sure that the pressure of the water
supply is not too low. For this information,
contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is
not clogged.
Make sure that the inlet hose has no kinks or
bends.
The appliance does not drain
the water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks
or bends.
The anti-flood device is on.
Close the water tap and contact the Service.
After the checks are completed, activate
the appliance. The program continues
from the point of interruption.
If the problem occurs again, contact the
Service.
If the display shows other alarm codes,
contact the Service.
10.1 If the washing and drying
results are not satisfactory
Whitish streaks or bluish layers on
glasses and dishes
• The released quantity of rinse aid is
too much. Adjust the rinse aid selector
to a lower position.
• The quantity of detergent is too much.
Stains and dry water drops on glasses
and dishes
• The released quantity of rinse aid is
not sufficient. Adjust the rinse aid selector to a higher position.
• The quality of the detergent can be
the cause.
Dishes are wet
• The program is without a drying phase
or with a low temperature drying
phase. Leave the door ajar for some
minutes before you remove the
dishes.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
cause.
• The quality of the combi detergent
tablets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse aid together with
the combi detergent tablets.
Refer to “HINTS AND TIPS” for
other possible causes.
10.2 How to activate the rinse
aid dispenser
The activation of the rinse aid dispenser
can occur only with the Multitab option
activated.
1. Press the on/off button to activate
the appliance. Make sure that the ap-
ENGLISH
pliance is in setting mode, refer to
“Setting and starting a program”.
2. Press and hold, at the same time, Delay and Start until the indicators of
,
and
start to flash.
3. Press Option .
• The indicators of
and
go off.
• The indicator
continues to
flash.
• The display shows the current setting.
17
Rinse aid dispenser off
Rinse aid dispenser on
4. Press Option to change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the setting.
6. Adjust the released quantity of rinse
aid.
7. Fill the rinse aid dispenser.
11. TECHNICAL INFORMATION
Dimensions
Width / Height / Depth
(mm)
Electrical connection
Refer to the rating plate.
Voltage
Frequency
Water supply pressure
Min. / max. (bar / MPa)
Water supply 1)
Cold water or hot water2)
Capacity
Place settings
596 / 850 / 610
220-240 V
50 Hz
(0.5 / 0.05 ) / (8 / 0.8 )
max. 60 °C
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, wind
turbine energy), use the hot water supply to decrease energy consumption.
14
18 www.aeg.com
12. INSTALLATION
12.1 Fitting under a kitchen
counter
The plinth of a freestanding appliance is
not adjustable.
Do not remove the appliance worktop if
you want to use it as a freestanding unit.
It is not necessary to remove the worktop when installing under a standard
kitchen counter.
Only remove the appliance worktop to
install it under a close fitting sink unit or
kitchen counter (820 mm).
Put the appliance adjacent to
a water tap and a water drain.
2. Make sure that the dimensions of the recess agree with
the dimensions in the figure.
1.
min 570 mm
820 mm
600 mm
Removing the worktop
3.
4.
5.
1
6.
7.
Remove the rear screws (1).
Pull the worktop from behind
(2).
Lift the worktop and move it
from the front slots. (3)
Level the appliance using the
adjustable feet.
Install the appliance under
the kitchen counter.
2
3
4
12.2 Water connection
Water inlet hose
Connect the inlet hose to a water tap
with an external BSP thread spout of
3/4″.
For best washing performance it is recommended to connect the appliance to
a cold water supply.
Energy savings can be made by connecting the appliance to a Solar water system and using economy options, however the water temperature must not exceed 60 °C.
Inlet water supply
• Water pressure: 800 kPa max - 50 kPa
min.
• Water flow rate 10 L / minute min.
ENGLISH
• If water pressure is in excess of 800
kPa, a pressure reducing valve should
be used. Check for leaks.
• If water temperature is in excess of 60
°C, a tempering valve should be used.
Check for leaks.
CAUTION!
Always use new hoses when you
connect the appliance to the water mains. Old hoses must not be
used. The water inlet hose must
be examined at an interval of
twelve months for deterioration
and replaced if necessary.
The water pressure must be in the limits,
refer to “TECHNICAL INFORMATION”.
Make sure that the local water authority
gives you the average mains pressure in
your area.
19
and must have a continuous fall to the
plumbing connection.
The drain hose can be lengthened using
additional lengths and connectors.
These must be purchased from Electrolux Spare Parts. The extension length
must not exceed 2 metres.
The drain hose must be free of obstructions.
Remove the sink plug when the appliance drains the water to prevent that the
water goes back into the appliance.
The appliance has a security feature to
prevent dirty water going back into the
appliance. If the spigot of the sink has a
non-return valve, this valve can cause the
appliance to drain incorrectly. Remove
the non-return valve.
Water drain hose
The highest point of the drain hose must
be no more than 600 mm from the floor
Remove
entire
internal
membrane
If you connect the water drain hose to a
trap spigot under the sink, remove the
plastic membrane. If you do not remove
the membrane, remaining food can
cause a blockage in the drain hose spigot.
20 www.aeg.com
13. WARRANTY
FOR SALES IN AUSTRALIA AND NEW
ZEALAND
ALL AEG BRANDED APPLIANCES
This document sets out the terms and
conditions of the product warranties
for AEG Appliances. It is an important
document. Please keep it with your
proof of purchase documents in a safe
place for future reference should you
require service for your Appliance.
1. In this warranty
a) ‘acceptable quality’ as referred to
in clause 10 of this warranty has
the same meaning referred to in
the ACL;
b) ‘ACL’ means Trade Practices
Amendment (Australian Consumer Law) Act (No.2) 2010;
c) ‘Appliance’ means any AEG
product purchased by you accompanied by this document;
d) ‘ASC’ means AEG’ authorised
serviced centres;
e) AEG is the brand controlled by
Electrolux Home Products Pty
Ltd of 163 O’Riordan Street, Mascot, NSW 2020, ABN 51 004 762
341 in respect of Appliances purchased in Australia and Electrolux (NZ) Limited of 3-5 Niall Burgess Road, Mount Wellington, in
respect of Appliances purchased
in New Zealand;
f) ‘major failure’ as referred to in
clause 10 of this warranty has the
same meaning referred to in the
ACL and includes a situation
when an Appliance cannot be repaired or it is uneconomic for
Electrolux, at its discretion, to repair an Appliance during the
Warranty Period;
g) ‘Warranty Period’ means:
– where the Appliance is used
for personal, domestic or
household use (i.e. normal single family use) as set out in the
instruction manual, the Appliance is warranted against manufacturing defects in Australia
2.
3.
4.
5.
and New Zealand for 60
months, following the date of
original purchase of the Appliance;
– this Appliance is not designed
for commercial use and therefore no warranty applies in this
case;
h) ‘you’ means the purchaser of the
Appliance not having purchased
the Appliance for re-sale, and
‘your’ has a corresponding meaning.
This warranty only applies to Appliances purchased and used in Australia or New Zealand and is in addition to (and does not exclude, restrict, or modify in any way) any nonexcludable statutory warranties in
Australia or New Zealand.
During the Warranty Period AEG or
its ASC will, at no extra charge if
your Appliance is readily accessible
for service, without special equipment and subject to these terms and
conditions, repair or replace any
parts which it considers to be defective. AEG or its ASC may use remanufactured parts to repair your Appliance. You agree that any replaced
Appliances or parts become the
property of AEG. This warranty does
not apply to light globes, batteries,
filters or similar perishable parts.
Parts and Appliances not supplied
by AEG are not covered by this warranty.
You will bear the cost of transportation, travel and delivery of the Appliance to and from AEG or its ASC. If
you reside outside of the service
area, you will bear the cost of:
a) travel of an authorised representative;
b) transportation and delivery of the
Appliance to and from AEG or its
ASC,
In all instances, unless the Appliance
is transported by AEG or an AEG authorised representative, the Appli-
ENGLISH
6.
7.
8.
9.
ance is transported at the owner’s
cost and risk while in transit to and
from AEG or its ASC.
Proof of purchase is required before
you can make a claim under this warranty.
You may not make a claim under this
warranty unless the defect claimed is
due to faulty or defective parts or
workmanship. AEG is not liable in
the following situations (which are
not exhaustive):
a) the Appliance is damaged by:
– accident
– misuse or abuse, including failure to properly maintain or
service
– normal wear and tear
– power surges, electrical storm
damage or incorrect power
supply
– incomplete or improper installation
– incorrect, improper or inappropriate operation
– insect or vermin infestation
– failure to comply with any additional instructions supplied
with the Appliance;
b) the Appliance is modified without authority from AEG in writing;
c) the Appliance’s serial number or
warranty seal has been removed
or defaced;
d) the Appliance was serviced or repaired by anyone other than
AEG, an authorised repairer or
ASC.
This warranty, the contract to which
it relates and the relationship between you and AEG are governed
by the law applicable where the Appliance was purchased. Where the
Appliance was purchased in New
Zealand for business purposes the
Consumer Guarantee Act does not
apply.
To the extent permitted by law, AEG
excludes all warranties and liabilities
(other than as contained in this
document) including liability for any
10.
11.
12.
13.
14.
21
loss or damage whether direct or indirect arising from your purchase,
use or non use of the Appliance.
For Appliances and services provided by AEG in Australia, the Appliances come with a guarantee by
AEG that cannot be excluded under
the Australian Consumer Law. You
are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are
also entitled to have the Appliance
repaired or replaced if the Appliance
fails to be of acceptable quality and
the failure does not amount to a major failure. The benefits to you given
by this warranty are in addition to
your other rights and remedies under a law in relation to the Appliances or services to which the warranty
relates.
At all times during the Warranty Period, AEG shall, at its discretion, determine whether repair, replacement
or refund will apply if an Appliance
has a valid warranty claim applicable
to it.
For Appliances and services provided by AEG in New Zealand, the
Appliances come with a guarantee
by AEG pursuant to the provisions of
the Consumer Guarantees Act, the
Sale of Goods Act and the Fair Trading Act.
To enquire about claiming under
this warranty, please follow these
steps:
a) carefully check the operating instructions, user manual and the
terms of this warranty;
b) have the model and serial number of the Appliance available;
c) have the proof of purchase (eg
an invoice) available;
d) telephone the numbers shown
below.
You accept that if you make a warranty claim, AEG and its ASC may
exchange information in relation to
you to enable AEG to meet its obligations under this warranty.
Important Notice
22 www.aeg.com
Before calling for service, please ensure that the steps listed in point 13 above have
been followed.
SERVICE AUSTRALIA
www.aeg.com/au
FOR SERVICE
or to find the address of your nearest state service centre in Australia
PLEASE CALL 1300 363 664
OR EMAIL customercare@aegaustralia.com.au
For the cost of a local call (Australia only)
FOR SPARE PARTS
or to find the address of your nearest state spare parts centre in Australia
PLEASE CALL 13 13 50
OR EMAIL customercare@aegaustralia.com.au
For the cost of a local call (Australia only)
SERVICE NEW ZEALAND
FOR SERVICE
or to find the address of your nearest authorised service centre in New Zealand
FREE CALL 0800 10 66 10
OR EMAIL customercare@electrolux.co.nz
(New Zealand only)
FOR SPARE PARTS
or to find the address of your nearest state spare parts centre in New Zealand
FREE CALL 0800 10 66 20
OR EMAIL customercare@electrolux.co.nz
(New Zealand only)
14. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
ENGLISH
23
117909741-A-052013
www.aeg.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising