ZANUSSI ZWF5140P User Manual

Add to my manuals
28 Pages

advertisement

ZANUSSI ZWF5140P User Manual | Manualzz
EN
User manual
Washing Machine
ZWF 5120 P
ZWF 5140 P
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2
4
4
5
5
6
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16
Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 18
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21
Subject to change without notice
Safety information
Important! Read carefully and keep for future reference.
• The safety of your appliance complies with the industry
standards and with legal requirements on the safety of
appliances. However, as manufacturers, we feel it is
our duty to provide the following safety notes.
• It is most important that this instruction book should
be retained with the appliance for future reference.
Should the appliance be sold or transferred to another
owner, or should you move house and leave the appliance, always ensure that the book is supplied with
the appliance in order that the new owner can get to
know the functioning of the appliance and the relevant
warnings.
• You MUST read them carefully before installing or using the appliance.
• Before first starting up, check the appliance for any
damage incurred during transport. Never connect up a
damaged appliance . If parts are damaged, contact your
supplier.
• If the appliance is delivered in the winter months when
there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.
• This appliance is made for use in a normal domestic
situation. The manufacturer is not responsible for
freezing damages. Read "Frost precaution".
General safety
• It is dangerous to alter the specifications or attempt to
modify this product in any way.
• During high temperature wash programmes the door
glass may get hot. Do not touch it!
• Make sure that small children and pets do not climb
into the drum. To avoid this, please check inside the
drum before using.
2
• Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the appliance.
• Only use the advised quantities of fabric softener and
detergent. Damage to the fabric can ensue if you overfill. Refer to the manufacturer’s recommendations of
quantities.
• Wash small items such as socks, laces, washable belts
etc in a washing bag or pillow case as it is possible for
such items to slip down between the tub and the inner
drum.
• Do not use your appliance to wash articles with whalebones, material without hems or torn material.
• Always unplug the appliance and turn off the water
supply after use, cleaning and maintenance.
• Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
• This appliance is heavy. Care should be taken when
moving it.
• All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in the user manual.
• This appliance is free standing only. DO NOT build it
in under a counter and DO NOT remove the worktop
for any reason.
• After having installed the appliance, check that it is not
standing on the inlet and drain hose and the worktop
is not pressing the electrical supply cable against the
wall.
• Install the appliance on a flat hard floor.
• Never place cardboard, wood or similar materials under the appliance to compensate for any unevenness
in the floor.
• If the appliance is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely
under the appliance.
• Check that the appliance does not touch the wall or
other kitchen units.
• This appliance must be connected to a cold water supply.
• Do not use the hose from your previous appliance to
connect to water supply. Always use the hose supplied
with the appliance.
• The inlet hose must not be lengthened. If it is too short
and you do not wish to move the tap, you will have to
purchase a new, longer hose specially designed for
this type of use.
• Always be sure, that there is no water leakage from
hoses and their connections after the installation.
• If the appliance is installed in a location subject to frost,
please read the “Frost precaution” chapter. Manufacturer decline any responsibility for freezing damages.
• Any plumbing work required to install this appliance
should be carried out by a qualified plumber or competent person.
• Any electrical work required to install this appliance
should be carried out by a qualified electrician or competent person.
Use
• This appliance is designed for domestic use. It must
not be used for purposes other than those for which it
was designed.
• Only wash fabrics which are designed to be machine
washed. Follow the instructions on each garment label.
• Do not overload the appliance. See the "Washing Programme Chart".
• Before washing, ensure that all pockets are empty and
buttons and zips are fastened. Avoid washing frayed or
torn articles and treat stains such as paint, ink, rust,
and grass before washing. Underwired bras must NOT
be machine washed.
• The detergent dispenser drawer is provided with an
insert for liquid detergent. Do not use the insert downwards for gelatinous detergents, with programmes including prewash, with the delay start option. In all these
cases you can use metering balls or sachets provided
with the detergent, Take out the metering aid at the end
of the washing cycle.
• Garments which have been in contact with volatile petroleum products should not be machine washed. If
volatile cleaning fluids are used, care should be taken
to ensure that the fluid is removed from the garment
before placing in the appliance.
• Never pull the power supply cable to remove the plug
from the socket; always take hold of the plug itself.
• Never use the appliance if the power supply cable, the
control panel, the working surface or the base are
damaged so that the inside of the appliance is accessible.
Child safety
• This appliance is not intended for use by people (including children) with reduced physical sensory or
mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.
• Keep all detergents in a safe place out of children’s
reach.
• Make sure that children or pets do not climb inside the
drum. To prevent children and pets becoming trapped
inside the drum this appliance incorporates a special
feature.
3
To activate this device, rotate the button (without
pressing it) inside the
door clockwise until the
groove is horizontal. If
necessary use a coin.
To disable this device and
restore the possibility of
closing the door, rotate the
button anti-clockwise until the groove is vertical.
Frost precaution
If the appliance is installed in a place where the temperature could drop below 0°C, proceed as follows to remove
any water remaining inside the appliance:
1. unplug the appliance;
2. turn off the water tap;
3. unscrew the water inlet hose from the tap;
4. unscrew the drain hose from the rear support and
unhook it from sink or spigot;
5. place a bowl on the floor;
6. let the drain hose run along the floor, place the external extremities of the drain and inlet hoses in the
bowl placed on the floor and let water drain out completely;
7. screw the water inlet hose to the tap and the drain
hose to the rear of the appliance again;
When you intend to start the appliance up again, make
sure that the room temperature is above 0°C.
Environment concerns
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
4
contact your local council, your household waste disposal
service or the shop where you purchased the product.
Packaging materials
The materials marked with the symbol are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them
properly in appropriate collection containers.
Ecological hints
To save water, energy and to help protect the environment,
we recommend that you follow these tips:
• Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the
environment is protected too!).
• The machine works more economically if it is fully
loaded.
• With adequate pre-treatment, stains and limited soiling
can be removed; the laundry can then be washed at a
lower temperature.
• Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry
being washed.
Product description
1
2
7
3
11
8
9
4
9
9
10
5
12
6
1 Detergent dispenser drawer
2 Worktop
7 Water drain hose
8 Drain hose support
3 Control panel
4 Door opening handle
9 Hose holders
10 Water inlet hose
11 Mains cable
5 Rating plate (on the inner edge)
6 Front adjustable feet
12 Back adjustable feet
Technical data
Dimensions
Width
Height
Depth
60 cm
85 cm
50 cm
Electrical connection
Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
5
Water supply pressure
Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load
Cotton
5 kg
Spin Speed
Maximum
1200 rpm (ZWF5120P)
1400 rpm (ZWF5140P)
Installation
Unpacking
Warning!
• Read carefully the "Safety information" chapter
before installing the appliance.
x3
A
B
• Remove the cardboard top.
• Remove the polystyrene packaging materials.
x3
x1
C
x2
1
Warning! Remove and keep all transit devices so
that they can be refitted if the appliance ever has
to be transported again.
Necessary tools
2
• Spread the front piece
on the floor behind the
appliance and then lay
the appliance carefully
rear side down on it.
Make sure that no hoses are crushed in the
process.
• Remove the polystyrene base from the bottom.
• Return appliance to it's
upright position.
10 mm
30 mm
• Remove the external
film. Use a cutter, if
necessary.
6
• Open the door and remove the plastic hose
guide, the bag containing the instruction
booklet and the plastic
plug caps from the
drum.
• Remove the power supply cable and the draining and
inlet hose from the hose holders ( C ) on the rear of
the appliance.
• Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.
Positioning and levelling
• Unscrew the three bolts ( A ) and remove the hose
holders ( C ).
• Slide out the relevant plastic spacers ( B ).
x4
Level the appliance by raising or lowering the feet.
The appliance MUST be level and stable on a flat hard
floor. If necessary, check the setting with a spirit level.
Any necessary adjustment can be made with a spanner.
7
Firstly form a hook in the end of the drain hose using
the plastic hose guide supplied with the appliance .
The end of the drain hose can be positioned in three
ways:
• Hooked over the edge of a sink using the plastic hose
guide.
Accurate levelling prevents vibration, noise and displacement of the appliance during operation.
Repeat the levelling action, if the appliance is not level
and stable.
Water inlet
Connect the hose to a tap
with a 3/4” thread.
Tie the plastic hose guide to the tap with a string to
prevent that the drain hose unhooks when the appliance
is emptying.
• Onto a sink outlet spigot.
35°
45°
Loosen the ring nut to angle the hose to the left or right
depending on the position of your water tap. Do not
place the inlet hose downwards. After positioning the
inlet hose, be sure to tighten the ring nut again to prevent leaks.
Push the drain hose onto the spigot and secure with a
clip, ensure a loop is formed in the drain hose to prevent
waste from the sink entering the appliance.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
• Directly into a drain pipe at a height of not less than
60 cm and not more than 100 cm.
MAX 100cm
Water drainage
The end of the drain hose
must always be ventilated ,
i.e. the inside diameter of
the drain pipe must be
larger than the outside diameter of the drain hose.
The drain hose must not
be kinked.
• Directly to a built-in drain pipe in the room wall.
8
The drain hose may be extended to a maximum of
4 metres. An additional drain hose and joining piece
is available from your Local Centre.
Connections overview
115 cm
100 cm
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information on the rating
plate agree with your domestic power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-way plugs, connectors and extension
cables. There is a risk of fire.
• Do not replace or modify the mains cable yourself.
Contact the After Sales Service.
150 cm
max 100 cm
9 0 cm
min. 60 cm
min. 60 cm
max 100 cm
115 cm
140 cm
• Make sure that the mains plug and cable is not squashed or damaged by the back of the appliance.
• Make sure that the mains plug is accessible after installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• This appliance complies with the E.E.C. Directives.
First use
• Ensure that the electrical and water connections
comply with the installation instructions.
• Ensure that the drum is empty.
machine, to remove any manufacturing residue
from the drum and tub. Pour 1/2 a measure of
detergent into the main wash compartment and
start the machine.
• Before the first wash, run a cotton cycle at the
highest temperature without any laundry in the
9
Daily use
Sort out the laundry
Follow the wash code symbols on each garment label and
the manufacturer’s washing instructions. Sort the laundry
as follows: whites, coloureds, synthetics, delicates, woollens.
Before Loading The Laundry
Important! Make sure that
no metal objects are left in
the laundry (e.g. hair clips,
safety pins, pins). Button
up pillowcases, close zip
fasteners, hooks and poppers. Tie any belts or long
tapes. Remove any hooks
(e.g curtains).
• Never wash whites and coloureds together. Whites may
lose their «whiteness» in the wash.
• New coloured items may run in the first wash; they
should therefore be washed separately the first time.
• Rub particularly soiled areas with a special detergent
or detergent paste.
• Treat curtains with special care.
• Wash the socks and the gloves inside the bag or a net.
Remove stubborn stains before washing:
Blood : treat fresh stains with cold water. For dried stains,
soak overnight in water with a special detergent then rub
in the soap and water.
Oil based paint : moisten with benzine stain remover, lay
the garment on a soft cloth and dab the stain; treat several
times.
Dried grease stains : moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips
and a cotton cloth.
Rust : oxalic acid dissolved in hot water or a rust removing
product used cold. Be careful with rust stains which are
not recent since the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains : treat with bleach, rinse well (whites and
fast coloureds only).
Grass : soap lightly and treat with bleach (whites and fast
coloureds only).
1) do not use acetone on artificial silk.
10
Ball point pen and glue : moisten with acetone1), lay the
garment on a soft cloth and dab the stain.
Lipstick : moisten with acetone as above, then treat stains
with methylated spirits. Treat any residual marks with
bleach.
Red wine : soak in water and detergent, rinse and treat
with acetic or citric acid, then rinse. Treat any residual
marks with bleach.
Ink : depending on the type of ink, moisten the fabric first
with acetone1), then with acetic acid; treat any residual
marks on white fabrics with bleach and then rinse thoroughly.
Tar stains : first treat with stain remover, methylated spirits
or benzine, then rub with detergent paste.
Open the door by carefully pulling the door handle
outwards
Load the laundry
Place the laundry in the
drum, one item at a time,
shaking them out as much
as possible.
Maximum Loads
Recommended loads are indicated in the «Washing Programmes».
General rules:
• Cotton, linen : drum full but not too tightly packed;
• Synthetics : drum no more than half full;
• Delicate fabrics and woollens : drum no more than one
third full.
Open the detergent dispenser drawer
Compartment for
powder or liquid detergent
used for main wash.
Compartment for liquid
additives (fabric softener,
starch).
Detergents and additives
Quantity of detergent to be used
The type and quantity of detergent will depend on the type
of fabric, load size, degree of soiling and hardness of the
water used.
For the quantity of detergent, refer always to what is written
on the product packing.
Use less detergent if:
• you are washing a small load,
• the laundry is lightly soiled,
• large amounts of foam form during washing.
Warning! If you wish to carry out the prewash, pour
the detergent among washing items into the drum.
Warning! Depending on the type detergent you use
(powder of liquid), ensure that the flap, placed in
the main wash compartment, is in the desired position.
Flap for powder or liquid detergent
SH
PU
SH
UP- Flap position if using DOWN - Flap position if
POWDER detergent
using LIQUID detergent
during main wash
RE
TO MOV
CL E
EA
N
Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste
and protect the environment.
Although biodegradable, detergents contain substances
which, in large quantities, can upset the delicate balance
of nature.
The choice of detergent will depend on the type of fabric
(delicates, woollens, cottons, etc.), the colour, washing
temperature and degree of soiling.
All commonly available washing machine detergents may
be used in this appliance:
• powder detergents for all types of fabric,
• powder detergents for delicate fabrics (40°C max) and
woollens,
• liquid detergents, preferably for low temperature wash
programmes (60°C max) for all types of fabric, or special for woollens only.
PU
Warning! Make sure
that any fabrics were
not trapped when closing
the door.
If the water hardness degree is medium or high we suggest
you to add a water softener following always the manufacturer’s instructions.
When the degree of hardness is soft, readjust the quantity
of the detergent.
RE
TO MOV
CL E
EA
N
Close the door gently
If the flap is not in the desired position :
Degrees of water hardness
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in your
area can be obtained from the relevant water supply company, or from your local authority.
11
• Remove the drawer. Push the drawer edge outwards
where indicated by the arrow (PUSH) to facilitate
drawer removal.
The flap is down and you wish to use powder detergent:
• Rotate the flap upwards. Ensure to fit the
flap completely in.
• Carefully put the drawer back.
• Measure out the detergent.
• Pour the powder detergent into the main wash
.
compartment
The flap is up and you wish to use liquid detergent:
• Rotate the flap downwards.
• Carefully put the drawer back.
• Pour the liquid detergent in the compartment
without exceeding the limit indicated in the flap. The
detergent must be placed in the appropriate compartments of the dispenser drawer before starting the
wash programme.
•
•
•
•
Warning! Do not use the flap in "DOWN" position
with:
Gelatinous detergent or thick detergent.
Powder detergent.
With programmes with prewash.
Do not use liquid detergent if the washing programme
doesn't start immediately.
In all above listed cases, use the flap in "UP" position .
Measure out the fabric softener
Pour fabric softener or any
additives into the com(do
partment marked
not exceed the «MAX»
mark in the drawer). Any
additives must be placed
in the appropriate compartments of the dispenser
drawer just before starting
the wash programme.
Close the detergent dispenser drawer
• Measure out the detergent.
For the quantity of detergent, refer always to what
is written on the product packing and ensure that
the detergent can be poured in the drawer.
Set your washing programme
The control panel permits to select a washing programmes and different options.
When an option button is selected, the corresponding pilot light is on. Otherwise it is off.
For compatibility among washing programmes and options, see the "Washing Programme Chart". If an incorrect
option is selected, the integrated red pilot light of the button 6 flashes 3 times.
12
Katoen
Jeans
Mini 30
Katoen + voorwas
20°
5 overhemden
1400
Katoen eco
900
Hoofdwas
4u
Extra spoelen
700
Anti-kreuk
Synthetica
Einde
8u
30°
90°
Centrifugeren
Mix
Pompen
Fijne was
Wol
Spoelen
1
Centrifugeren
Startuitstel
Extra kort
3
4
5
Start/Pauze
40°
60°
2
6
7
Turn the programme selector dial to the required programme. The selector
dial can be turned either clockwise or counter-clockwise. The green pilot
light of the button 6 starts flashing: the appliance is now switched on.
Programme selector dial
Katoen
Jeans
Mini 30
1
Katoen + voorwas
5 overhemden
Katoen eco
Anti-kreuk
Synthetica
Centrifugeren
Mix
Pompen
Spoelen
Wol
Fijne was
If you turn the programme selector dial to another programme when
the appliance is working, the red pilot light of the button 6 will flash
3 times to indicate a wrong selection. The appliance will not perform the
new selected programme.
• To switch the appliance off , turn the programme selector dial to the
.
position
• To cancel or change a running programme, switch the appliance off by
. Select the new
turning the programme selector dial to the position
programme by turning the selector to the desired programme. Start the
new programme by pressing the button 6 again. The water in the tub
will be not emptied out.
Temperature button
20°
2
30°
90°
60°
Push the temperature button to select the most suitable temperature for
washing your laundry .
Cold : Cold wash.
40°
13
1400
900
700
3
Centrifugeren
4u
8u
4
Startuitstel
Spin Reduction
By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you want your
laundry to be spun at a different speed. The relevant light illuminates.
Rinse Hold
By selecting this function the water of the last rinse is not emptied out to
prevent the fabrics from creasing. Before opening the door it will be necessary to empty out the water.
To empty out the water, please read the paragraph «At the end of the programme».
The start of the programme can be delayed by 8 or 4 hours by means of
this button. The relevant light illuminates.
You must select this option after you have set the programme and before
you start the programme.
Select a delayed start:
• select the programme and the required options;
• select the delay start by pressing the button 4 ;
• press the button 6 :
– the appliance starts its hourly countdown.
– The programme will start after the selected delay has expired.
Cancelling the delayed start after having started the programme:
• set the appliance to PAUSE by pressing the button 6 ;
• press the button 4 once, the light relevant to the selected delay goes off;
• press the button 6 again to start the programme.
The DELAY START cannot be selected with the drain programme.
Important! The selected delay can be changed only after selecting the
washing programme again. The door will be locked throughout the delay
time. If you need to open the door, you must set the appliance to PAUSE
(by pressing the button 6 ) and then wait a few minutes. After you have
closed the door, press the button 6 again.
Extra kort
5
14
By pressing this button the corresponding pilot light illuminates.
Short cycle for lightly soiled items or for laundry which needs only freshening up.
With this option, a reduced load of laundry is recommended:
• Cottons 2,5 Kg
• Synthetics and delicates 1,5 Kg
Extra Rinse
4u
8u
Startuitstel
Extra kort
Start/Pauze
6
Indicator pilot lights
7.1
7.2
Hoofdwas
Extra spoelen
Einde
7.3
This appliance is designed for saving water. However, for people with very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water.
Press simultaneously the buttons 4 and 5 for some seconds: the pilot light
7.2 comes on. This function stays permanently on. To remove it press the
same buttons again until the pilot light 7.2 goes off.
Start the programme by pressing the button 6
• To start the selected programme, press the button 6 , the corresponding
green pilot light stops flashing. The pilot light 7.1 illuminates to indicate
that the appliance starts operating and the door is locked. If you have
chosen a delayed start, the appliance will begin the countdown.
• To interrupt a programme which is running, press the button 6 : the
corresponding green pilot light starts flashing. It is possible to
change some options of a running programme before the programme
carries them out.
• To restart the programme from the point at which it was interrupted,
press the button 6 .
• After the programme has started the door is locked. If, for any reason,
you need to open the door , set firstly the appliance to PAUSE by pressing
the button 6 . After a few minutes it will be possible to open the door.
If the door remains locked, this means that the appliance is already
heating or that the water level is too high. In any case, do not try to force
the door!
If you cannot open the door but you need to open it you have to switch
. After a few minutes
the appliance off by turning the selector dial to
the door can be opened ( pay attention to the water level and temperature! ). After closing the door, it is necessary to select the programme
and options again and to press the button 6 .
• When you start the programme by pressing the button 6 , the washing
phase pilot light ( 7.1 ) illuminates. This means that the appliance is
operating.
• The additional rinses pilot light ( 7.2 ) illuminates when the appliance
perform an extra rinse.
• When the programme has finished the end cycle pilot light ( 7.3 ) comes
on.
At the end of the programme
The appliance stops automatically. The pilot light of the
button 6 and the pilot light corresponding to the just finished washing phase go off. The light 7.3 illuminates.
If a programme or an option that ends with water left in
the tub has been selected and the door remains locked to
indicate that the water must be emptied out before opening
the door.
Follow the below instructions to empty out the water:
15
• Turn the programme selector dial to
.
• Select the draining or spinning programme.
• Reduce the spin speed if needed, by pressing the relevant button.
• Press the button 6 .
At the end of the programme, the door can be now opened.
to switch the
Turn the programme selector dial to
appliance off.
Remove the laundry from the drum and carefully check
that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open to
prevent the formation of mildew and unpleasant smells.
lector dial and any button are not touched, after a few
minutes the energy saving system is enabled. The pilot
lights go off. The green pilot light of the button 6 flashes
with a low frequency. By pressing any button the appliance will come out of the energy saving status.
Door seal
At the end of every cycle,
check from the door seal
and remove objects that
could be trapped in the
fold.
Warning! If there are children or pets in the house,
activate the child safety device in the inner side of
the door frame (for more details read " Child safety" in the
chapter "Safety Information").
Stand by : during programme setting up and once
the programme has finished, if the programme se-
Washing programmes
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type
of Laundry
Options
COTTONS
(Cold)
90°Main wash - Rinses - Maximum spin speed: 1200 rpm for
ZWF5120P and 1400 rpm for ZWF5140P
Max. load 5 kg - Reduced load 2,5 kg1)
White, coloured cotton and linen . Normally soiled items.
SPIN REDUCTION ,
RINSE HOLD ,
DELAY START ,
SUPER QUICK ,
EXTRA RINSE
COTTONS + PREWASH
(Cold)
90° Prewash - Main wash - Rinses - Maximum spin speed: 1200 rpm
for ZWF5120P and 1400 rpm for ZWF5140P
Max. load 5 kg - Reduced load 2,5 kg1)
White, coloured cotton and linen . Heavy soiled items.
SPIN REDUCTION ,
RINSE HOLD ,
DELAY START ,
SUPER QUICK ,
EXTRA RINSE
ECONOMY
60° - 40°
Main wash - Rinses - Maximum spin speed: 1200 rpm for
ZWF5120P and 1400 rpm for ZWF5140P
Max. load 5 kg
White and coloured cotton . This programme can be selected for
slightly or normally soiled cotton items. The temperature will decrease and the washing time will be extended. This allows to obtain
a good washing efficiency by saving energy.
SPIN REDUCTION ,
RINSE HOLD ,
DELAY START ,
EXTRA RINSE
16
Detergent Compartment
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type
of Laundry
Options
SYNTHETICS
(Cold)
60° Main wash - Rinses - Maximum spin speed: 1200 rpm for
ZWF5120P - 900 rpm forZWF5140P
Max. load 2,5 kg - Reduced load 1,5 kg1)
Synthetic or mixed fabrics : underwear, coloured garments, nonshrink shirts, blouses . Normally soiled items.
SPIN REDUCTION ,
RINSE HOLD ,
DELAY START ,
SUPER QUICK ,
EXTRA RINSE
MIX
20°
Main wash - Rinses - Maximum spin speed: 1200 rpm for
ZWF5120P - 900 rpm for ZWF5140P
Max. load 2,5 kg
Highly energy efficient cold wash programme for lightly soiled
laundry. This programme requires a detergent which is active in
cold water.
SPIN REDUCTION ,
RINSE HOLD ,
DELAY START ,
EXTRA RINSE
DELICATES
(Cold)
40°Main wash - Rinses - Maximum spin speed at 700 rpm
Max. load kg 2,5 - Reduced load 1,5 kg1)
Delicate fabrics : acrylics, viscose, polyester . Normally soiled
items.
Detergent Compartment
RINSE HOLD ,
DELAY START ,
SUPER QUICK ,
EXTRA RINSE
WOOL
(Cold)
40°Main wash - Rinses - Maximum spin speed at 1200 rpm for
ZWF5120P - 900 rpm for ZWF5140P
Max. load 2 kg
Machine washable wool, hand washable woollens and delicate
fabrics with «hand washing» care symbol . Note : A single or bulky
item may cause imbalance. If the appliance doesn’t perform the
final spin phase, add more items, redistribute the load manually
and then select the spinning programme.
SPIN REDUCTION ,
RINSE HOLD ,
DELAY START
RINSE
Rinse - Short spin speed 700 rpm. If a spin speed higher than 700
rpm is selected, by pressing the relevant button, the appliance
performs a long spin. (Maximum spin speed at 1200 rpm)
Max. load 5 kg
To rinse and spin cotton garments which have been washed by
hand. Select the EXTRA RINSE option to intensify the rinsing action.
The appliance adds additional rinses.
SPIN REDUCTION ,
RINSE HOLD ,
DELAY START ,
EXTRA RINSE
DRAIN
Draining of water
For emptying out the water left in the drum.
17
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type
of Laundry
Options
SPIN
Drain and long spin at maximum spin speed: 1200 rpm for
ZWF5120P- 1400 rpm for ZWF5140P
Max. load 5 kg
Separate spin for hand washed garments and after programmes
with the No Spin option selected. You can choose the spin speed
by pressing the relevant button to adapt it to the fabrics to be spun.
If a spin speed at 700 rpm or lower is selected, by pressing the
relevant button, the appliance performs a short spin.
SPIN REDUCTION ,
DELAY START
EASY IRON
(Cold)
40°Main wash - Rinses - Maximum spin speed at 900 rpm
In order to obtain the best anti-creasing result, reduce the load of
synthetic items. (Recommended load 1 kg)
Synthetic or mixed fabrics. Gentle wash and spin to avoid any
creasing. The appliance performs additional rinses.
SPIN REDUCTION ,
RINSE HOLD ,
DELAY START ,
EXTRA RINSE
5 SHIRTS
30°
Main wash - Rinses - Maximum spin speed at 900 rpm
Synthetics and mixed fabrics . Suitable for 5 - 6 shirts lightly soiled.
SPIN REDUCTION ,
DELAY START
MINI 30
30°
Main wash - Rinses - Maximum spin speed at 700 rpm
Max. load 3 kg
Synthetics and delicates. Lightly soiled items or which only needs
freshening up.
RINSE HOLD ,
DELAY START
JEANS
(Cold)
60°Main wash - Rinses - Maximum spin speed:1200 rpm for
ZWF5120P - 900 rpm for ZWF5140P
Max. load 3 kg
Trousers, shirts or jackets in denim and jersey realized with hi-tech
materials. The Extra Rinse option is activated automatically.
SPIN REDUCTION ,
RINSE HOLD ,
DELAY START
Detergent Compartment
1) If you select the SUPER QUICK option by pressing button 5 , we recommend that you reduce the maximum load as indicated. Full
loading is possible however with somewhat reduced cleaning results.
Consumption values
Programme
White Cottons 90°
18
Energy consumption
(KWh)
Water consumption (litres)
Programme duration (Minutes)
2.00
72
170
Programme
Energy consumption
(KWh)
Water consumption (litres)
Programme duration (Minutes)
Cottons 60°
1.10
67
145
Cotton ECO 60° 1)
0.85
46
175
Cottons 40°
0.70
67
140
Synthetics 40°
0.55
55
90
Delicates 40°
0.55
63
75
Wool/ Handwash 30°
0.30
48
55
1) «Cottons Eco» at 60°C with a load of 5 kg is the reference programme for the data entered in the energy label, in compliance with
EEC 92/75 standards.
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on
the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
Care and cleaning
Warning! Switch the appliance off and remove the
mains plug from the socket before any cleaning
action.
Maintenance Wash
• To aid cleaning, the top
part of the additive
compartment should
be removed.
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash programme.
• Use a normal measure of detergent, must be a powder
with biological properties.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
• Use a stiff brush to clean and remove all washing
powder residue.
• Clean all the removed parts of the dispenser drawer
under a tap to remove any traces of accumulated
powder.
• Remove the drawer.
19
• Use the previous brush
to clean the recess, ensuring that upper and
lower part of it is well
cleaned.
After having cleaned the dispenser and the drawer recess, replace it.
Cleaning the drain filter
The filter permits to hold fluff or foreign bodies left unawares in the laundry.
The pump must be cleaned regularly.
To clean the filter, proceed as follows:
• turn programme selector dial to position
;
• remove the filter and clean it under the tap;
• if necessary, place the
filter cover in the right
position again.
• open the filter cover
and insert the filter
again;
• unplug the appliance;
• open the door;
• turn the drum and align
the filter cover ( FILTER ) with the arrow on
the door seal;
• open the filter cover by
pressing the special
hook and by rotating
the cover upwards;
Warning! Keep the
filter cover open until the filter removal.
• before removing the filter, remove any fluff or
small objects from
around the filter;
20
The filter is inserted correctly when the indicator on its
top is visible and blocked.
• close the filter cover;
• insert the mains plug
again.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, it takes a long time
to fill with water, the starting button flashes red or the
display (if available) shows the relevant alarm (see
chapter "What to do if..." for more details), check if the
water inlet filters are blocked .
• Screw the hose back onto the tap. Make sure the
connection is tight.
• Unscrew the hose from
the appliance. Keep a
towel nearby because
some water may flow.
• Clean the filter in the
valve with a stiff brush
or with the piece of
cloth.
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose from
the tap.
• Clean the filter in the
hose with a stiff brush.
• Screw the hose back to the appliance and make sure
the connection is tight.
• Turn on the water tap.
What to do if…
The appliance does not start or stops during operation.
Certain problems are due to lack of simple maintenance
or oversights, which can be solved with the help of the
indications described in the charts, without calling out an
engineer.
During appliance operation it is possible that the red pilot
light of the button 6 flashes and one of the indicator pilot
Fault code and malfunction
Hoofdwas
Extra spoelen
Einde
Start/Pauze
lights illuminates to indicate that the appliance is not
working.
Before contacting your local Service Centre, please carry
out the checks listed below.
Possible cause / Solution
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
• Clean the water inlet filters (read "Cleaning the water inlet filters" for more details).
The light of button 6 flashes
and the light 7.1 illuminates:
Problem with the water supply
21
Fault code and malfunction
Possible cause / Solution
The drain hose is squashed or kinked.
• Check the drain hose connection.
The drain filter is clogged.
If the appliance stops working without discharging the water , first carry out an
emergency drain:
• turn the programme selector dial to
;
Hoofdwas
Extra spoelen
Einde
Start/Pauze
•
•
•
•
•
The light of button 6 flashes •
and the light 7.2 illuminates:
Problem with the water drainage
•
•
•
•
•
Hoofdwas
Extra spoelen
unplug the appliance;
close the water tap;
if necessary, wait until the water has cooled down;
unscrew the drain hose from the rear support (see "Frost precaution") and unhook
it from the sink or spigot;
let it run along the floor;
place a bowl on the floor and place the end of the draining hose into the bowl.
The water should drain by gravity into the bowl. When the bowl is full, empty it.
Repeat the procedure until water stops flowing out ;
screw the draining hose to the rear support and reposition it;
open the door and remove the laundry;
carry out the drain filter cleaning as described in "Cleaning the drain filter";
at the end of cleaning action, close the door and insert the mains plug again;
run a drain programme to check if the appliance works now.
The door has not been closed or is not closed properly.
• Close firmly the door.
Einde
Start/Pauze
The light of button 6 flashes
and the light 7.3 illuminates:
Door open
The appliance does not start or stops during operation
without any visible alarm.
22
Before contacting your local Service Centre, please carry
out the checks listed below.
Malfunction
Possible cause / Solution
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
The appliance does not start: • Replace the fuse.
The programme selector dial is not correctly positioned and the button 6 has not
been pressed.
• Please turn the selector dial and press the button 6 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The appliance fills then emp- The end of the drain hose is too low.
ties immediately:
• Refer to paragraph in "Water drainage" in chapter "Installation".
An option or a programme that ends with the water still in the tub or a that eliminates
all the spinning phases has been selected.
The appliance does not empty
• Select the draining or spinning programme.
and/or does not spin:
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
There is water on the floor:
Too much detergent or unsuitable detergent (creates too much foam) has been used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It is not always
easy to see this as the water runs down the hose; check to see if it is damp.
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Replace it with a new one.
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the door lock is released.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The appliance is not levelled correctly.
The appliance vibrates noisi- • Adjust the feet.
ly:
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
23
Malfunction
Possible cause / Solution
The electronic unbalance detection device has cut in because the laundry is not
evenly distributed in the drum. The laundry is redistributed by reverse rotation of the
drum. This may happen several times before the unbalance disappears and normal
spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed
Spinning starts late or the ap- in the drum, the appliance will not spin. In this case, redistribute the load manually
and select the spin programme.
pliance does not spin:
• Load more laundry.
The load is too small.
• Add more items, redistribute the load manually and then select the spinning
programme.
No water is visible in the
drum:
Appliances based on modern technology operate very economically using very little
water without affecting performance.
Unsatisfactory washing results
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The appliance makes an unusual noise
The appliance is fitted with a type of motor which makes an unusual noise compared
with other traditional motors. This new motor ensures a softer start and more even
distribution of the laundry in the drum when spinning, as well as increased stability
of the appliance.
The necessary data for the service centre is on the rating
plate. We recommend that you write the data here:
Mod
Prod . ...
. No. ... ...
...
...
..
Ser.
No.
...
...
...
After completing these checks, switch on the appliance
and press the button 6 to restart the programme.
If the malfunction shows again, contact your Service Centre.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
Model description
(MOD.)
...............................
Product number (PNC) ...............................
Serial number (S.N.)
24
...............................
25
26
27
132 943 190 - 00 - 182010
www.zanussi.com/shop

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement