IKEA | RENLIGFWM | User manual | IKEA RENLIGFWM User Manual

RENLIG
FWMND6
GB
ENGLISH
4
ENGLISH
4
Contents
Safety information
Product description
Control panel
First use
Personalisation
Daily use
Helpful hints and tips
Washing programmes
4
7
8
10
11
11
14
15
Consumption values
Care and cleaning
What to do if…
Technical data
Installation
Electrical connection
Environment concerns
IKEA GUARANTEE
18
19
22
25
26
26
27
27
Subject to change without notice
Safety information
For your safety and correct operation
of the appliance, read this manual
carefully before installation and use. Always
keep these instructions with the appliance
even if you move or sell it. Users must fully
know the operation and safety features of
the appliance.
The manufacturer is not responsible for
damages caused by incorrect installation
and use.
Children and vulnerable people safety
• Do not let persons, children included, with
reduced physical sensory, reduced mental functions or lack of experience and
knowledge to use the appliance. They
must have supervision or instruction for
the operation of the appliance by a person who is responsible for their safety.
• Keep all packaging well away from children. There is risk of suffocation.
• Keep all detergents in a safe area. Do
not let children touch the detergents.
• Make sure that children or pets do not
climb into the drum. Please check into the
drum before using it.
This appliance incorporates a special
feature to prevent children and pets becoming trapped inside the drum.
To activate this
device, rotate the
button clockwise
(without pressing
it) inside the door
until the groove is
horizontal. If necessary use a coin.
To disable this device and restore
the possibility of
closing the door,
rotate the button
anticlockwise until
the groove is vertical.
General safety
• Do not change the specifications or modify this product. There is risk of injury and
damage to the appliance.
• If the appliance is delivered in the winter
months when there are minus temperatures, store it at room temperature for 24
hours before using for the first time.
Please read the “dangers of freezing”
chapter.
• This appliance is designed for use in normal inside temperature. Manufacturer is
not responsible for freezing damages.
• Always unplug the appliance and turn off
the water supply after use, cleaning and
maintenance.
ENGLISH
Installation
• A qualified and competent person must
do the electrical and the plumbing installation.
• This appliance is heavy. Take care when
you move it.
• Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary,
contact dedicated After Sales Service.
• Remove all packaging and transit bolts
before first use. Serious damage can occur to the appliance or to neighbouring
cabinets or furniture.
• Keep all transit devices so that they can
be refitted if the appliance ever has to be
transported again. Please refer to the relevant steps in the Assembly Instruction.
• Never place cardboard, wood or similar
materials under the appliance to compensate for any unevenness in the floor.
Level accurately the appliance and tight
the lock nuts to prevents vibration, noise
and displacement of the appliance during operation.
• If your appliance is installed on a carpeted floor, adjust the feet in order to ensure that the air must circulate freely under the appliance.
• Check that your appliance is not standing
on the inlet and drain hose and the worktop or the back of the appliance is not
pressing the electrical supply cable
against the wall.
• Always be sure, that there is no water
leakage from hoses and their connections
after the installation.
• If the appliance is installed in a location
subject to frost, please read the “dangers
of freezing” chapter.
Use
• The appliance is only for domestic use.
Do not use the appliance for commercial
and industrial use or for other uses.
• Only an authorised service engineer can
repair this appliance. Use only original
spare parts.
5
• Refer to the instructions on the label of
each item (garment) before washing.
• Do not overload the appliance. See the
Washing Programme Table.
• Before washing, ensure that all pockets
are empty and buttons and zips are fastened.
• Any objects such as coins, safety pins,
nails, screws, stones or any other hard,
sharp material can cause extensive damage and must not be placed into the appliance.
• Treat stains such as paint, ink, rust, and
grass before washing.
• Only use the advised quantities of fabric
softener and detergent. Damage to the
fabric can ensue if you overfill. Refer to
the manufacturer’s recommendations of
quantities.
• Wash small items such as socks, laces,
washable belts etc. in a washing bag or
pillow case as it is possible for such items
to slip down between the tub and the inner drum.
• Do not use your appliance to wash articles with whalebones, items without hems,
frayed and torn. Underwired bras must
NOT be washed.
• Garments which have been in contact
with volatile petroleum products should
not be appliance washed. If volatile
cleaning fluids are used, care should be
taken to ensure that the fluid is removed
from the garment before placing in the
appliance.
• The water we use normally contains lime.
It is a good idea to periodically use a
water softening powder in the appliance.
Do this without any laundry into the drum
and according to the softening powder
manufacturer’s instructions. This will help
to prevent the formation of lime deposits
making your appliance more efficiency.
• Never pull the power supply cable to remove the plug from the socket; always
take hold of the plug itself.
ENGLISH
• Never use the appliance if the power
supply cable, the control panel, the working surface or the base is damaged so
that the inside of the appliance is accessible.
Water inlet
• This appliance must be connected to a
cold water supply.
• Do not use connection hoses from an old
appliance to connect it to the water supply.
• The water pressure must be in the limits
(refer to the chapter «Technical data» table). Make sure that the local water authority gives you the average mains pressure in your area.
• Make sure that there are no kinks in the
water inlet hose and that the water inlet
hose is not squashed or entangled.
• Before connecting up the appliance to
new pipework or to pipework that has
not been used for some time, run off a
reasonable amount of water to flush out
any debris that may have collected in the
pipes.
• Turn the inlet hose on the back of the appliance to the left or the right to suit the
installation.
• The inlet hose must not be lengthened. If
it is too short and you do not wish to
move the tap, you will have to purchase a
new, longer hose specially designed for
this type of use.
• Before opening the water tap, be sure to
tighten the ring nut well to prevent any
leaks.
Water drainage
• Make sure the end of the drain hose cannot come unhooked when the appliance
is emptying. This could be done by tying
it to the tap with a piece of string or attaching it to the wall.
6
• The drain hose must be placed at a
height of not less than 44 cm and not
more than 90 cm. Please refer to the Assembly Instruction booklet.
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the mains plug from
the mains socket.
• Clean the exterior cabinet of the appliance with soap and water only, and then
dry thoroughly.
• The washing powder and additive dispenser drawer should be cleaned regularly.
• Inspected the pump regularly and particularly if:
– the appliance does not empty and/or
spin
– the appliance makes an unusual noise
during draining due to objects such as
safety pins, coins etc. blocking the
pump.
• Never remove the pump cover during a
wash cycle. Always wait until the appliance has drained out the water. If you
have selected an high temperature washing programme please wait until the water has cooled down.
• Ensure that the pump cover is securely retightened to prevent any leaks.
ENGLISH
7
Product description
1
1
2
3
4
5
6
2
3
4
5
6
Detergent dispenser drawer
Compartment for detergent used for
prewash and soak phase or for stain remover used during the stain action phase
(if available). The prewash and soak detergent is added at the beginning of the
wash programme. The stain remover is
added during the stain action phase.
Compartment for powder or liquid detergent used for main wash. If using liquid
detergent pour it just before starting the
programme.
Compartment for liquid additives (fabric softener, starch).
Follow the product manufacturer’s
recommendations on quantities to
use and do not ever exceed the «MAX»
mark in the detergent dispenser drawer.
Any fabric softener or starching additives
must be poured into the compartment before starting the wash programme.
Detergent dispenser drawer
Control panel
Door opening handle
Rating Plate
Drain pump
Adjustable feet
ENGLISH
8
Control panel
Below is a picture of the control panel. It shows the programme selector dial as well as
the buttons and the indicator lights. These are presented by relevant numbers on the
following pages.
1
2
10
1 Programme selector dial
2 Display
3 Door locked indicator light
4 Delay Start button
5 Start/Pause button
Table of symbols
9
8
6
7
8
9
10
7
= Spin
= Cottons
= No spin
= Cold wash
= Rinse Hold
= Synthetics
= Options
= Delicates
= Economy
= Quick Wash
= Wool
= Prewash
= Special programmes
= Easy Iron
= Jeans
= Extra Rinse
= Soak
= Start/Pause
= Rinses
= Drain
4
5
Extra Rinse button
Easy Iron button
Prewash button
Multi-Functions button
Spin reduction button
= On/Off - Reset
= Handwash
6
3
= Door locked
= Delay Start
ENGLISH
9
Programme selector dial
It allows you to switch the appliance On/Off and/or to select
a programme.
Spin reduction button
By pressing this button you can change the spin speed of the
selected programme.
• No Spin option: by selecting this option, all spinning phases are suppressed and replaced by a drain, so as not to
wrinkle the laundry. Recommended for extremely delicate
fabrics.
• Rinse Hold option: by selecting this option the water of the
last rinse is not emptied out to prevent the fabrics from
creasing. Before opening the door it will be necessary to
empty out the water. To empty out the water, please read
the paragraph «At the end of the programme».
Multi-Functions button:
By pressing this button, you can select only one of the options. The relevant indicator light will light up.
• Economy: recommended washing programme for cottons
and synthetic items lightly or normally soiled at a temperature of 40° C or higher. The washing time will be prolonged and the washing temperature will be reduced. You
can use this option if you want to wash normally soiled
laundry and at the same time save energy.
• Super Quick: a very short cycle for slightly soiled items that
have been worn for a short time.
Prewash button
By selecting this option the appliance performs a prewash
cycle before the main wash phase. The washing time will be
prolonged. This option is recommended for heavily soiled
laundry.
Easy Iron button
By selecting this option the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform some additional rinses in
some programmes. On cotton programmes the maximum
spin speed is reduced automatically.
Extra Rinse button
This appliance is designed for saving energy. If it necessary
to rinse the laundry using an extra quantity of water (extra
rinse), select this option. Some additional rinses will be performed. This option is recommended for people who are allergic to detergents, and in areas where the water is very
soft.
Start/Pause button
This button allows you to start or to interrupt the selected
washing programme.
ENGLISH
10
Door Locked indicator
light
The indicator light 3 illuminates when the programme starts
and indicates if the door can be opened:
• light on: the door cannot be opened. The machine is working or has stopped with water left in the tub.
• light off: the door can be opened. The programme is finished or the water has been emptied out.
• light blinking: the door is opening in a few minutes.
Delay Start button
The programme can be delayed from 30 min - 60 min - 90
min, 2 hours and then by 1 hour up to a maximum of 20
hours by means of this button.
Display
The display shows the following information:
• 10.1
– Child safety lock.
This device permits you to leave the appliance unattended during it's functioning.
• 10.2
– Duration of the selected programme.
After selecting a programme, the duration is displayed
in hours and minutes (for example
). The duration
is calculated automatically on the basis of the maximum
recommended load for each type of fabric. After the
programme has started, the time remaining is updated
every minute.
– Delayed start.
The Selected delay set by pressing the relevant button
appears on the display for a few seconds, then the duration of the selected programme is displayed again.
The delay time value decreases by one unit every hour
and then, when 1 hour remains, every minute.
– Alarm codes.
In the event of operating problems, some alarm codes
can be displayed, for example
(see paragraph
«What to do if...»).
– Incorrect option selection.
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed at
the bottom of the display for a few seconds and the integrated red indicator light of button 5 start flashing.
– End of programme.
When the programme has finished the flashing zero (
) is displayed, the indicator light 3 and the indicator
light of button 5 go out and the door can be opened.
10.1
10.2
First use
1.
Ensure that the electrical and water
connections comply with the installation
instructions.
2.
Remove any material from the drum.
ENGLISH
3.
11
Pour 1/2 a measure of detergent into
the main wash compartment and start
the appliance.
Pour 2 liters of water into the main
of the detergent
wash compartment
drawer in order to activate the ECO
valve.
Select a cotton cycle at the highest temperature without any laundry in the appliance, to remove any manufacturing
residue from the drum and tub.
Personalisation
Acoustic signals
The machine is provided with an acoustic
device, which sounds in the following cases:
• at the end of the cycle
• if there is a fault.
By pressing the 7 and 8 buttons simultaneously for about 6 seconds, the acoustic signal is deactivated (except if there is a fault).
By pressing these 2 buttons again, the
acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unattended so you do not need to
worry that children might be injured by or
cause damage to the appliance. This function remains enabled also when the washing machine is not working.
There are two different ways to set this option:
1. Before pressing button 5: it will be impossible to start the machine.
2. After pressing button 5: it will be impossible to change any other programme
or option.
To enable or disable this option press simultaneously for about 6 seconds buttons 9
and 10 until on the display, the icon
appears or disappears.
Daily use
Open the door
Open the door by carefully pulling the door
handle outwards.
Load the laundry
Place the laundry in
the drum, one item
at a time, shaking
them out as much
as possible.
By pushing the
porthole frame,
close firmly the
door.
Measure out detergent and fabric
softener
1
Pour the detergent
into the main wash
compartment
or
in the appropriate
compartment if the
selected programme/option it
requires (see more
details in "Detergent dispenser
drawer").
To pour the right
quantity of the detergent, see more
ENGLISH
12
details in "Degrees
of water hardness".
2
Pour fabric softener
into the compartment marked
(must not exceed
the «MAX» mark in
the drawer).
Close the drawer gently
Select the required programme by turning
the programme selector dial (1)
The appliance is now switched on. The indicator light of button 5 starts to blink.
At the end of the programme the selector
dial must be turned to position O, to switch
the appliance off.
For the description of each wash cycle,
the compatibility among the washing
programmes and the options, consult the
chapter «Washing Programmes».
Caution! If you turn the programme
selector dial to another programme
when the appliance is working, the red
indicator light of button 5 will blink 3 times
and the message Err appears on the
display to indicate a wrong selection. The
appliance will not perform the new selected
programme.
Reduce the spin speed or select the No
Spin or Rinse Hold by pressing button 2
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 2 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant indicator light illuminates.
Select the available options by pressing
buttons 6, 7, 8 and 9
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired programme and before starting the programme.
When these buttons are pressed, the corresponding indicator lights illuminate. When
they are pressed again, the indicator lights
go out. If an incorrect option is selected, the
integrated red indicator light of the button
5 flashes for 3 times and the message Err
appears on the display.
For the compatibility among the washing programmes and the options see
chapter «Washing Programmes».
Select the Delay Start by pressing button
4
Before you start the programme, if you wish
to delay the start, press this button to select
the desired delay.
The selected delay time value will appear
on the display for a few seconds, then the
duration of the programme will appear
again.
You must select this option after you have
set the programme and before you start the
programme.
You can cancel or modify the delay time at
any moment, before you press button 5.
Selecting the delay start :
1. Select the programme and the required
options.
2. Select the delay start by pressing button 4.
3. Press button 5:
– the machine starts its hourly countdown.
– the programme will start after the selected delay has expired.
Cancelling the Delay Start after having started the programme:
1. Set the washing machine to PAUSE by
pressing button 5.
2. Press button 4 once. On the display will
appear '.
ENGLISH
3.
13
Press button 5 again to start the programme.
Press the button again to restart the programme.
• The selected delay can be changed
only after selecting the washing programme again.
• The door will be locked throughout
the delay time. If you need to open
the door, you must first set the washing machine to PAUSE by pressing
button 5 and wait a few minutes before opening the door. After you
have closed the door, press the
same button again.
• The Delay Start cannot be selected
with the draining programme.
Cancelling a programme
Turn the selector dial to O to cancel a programme which is running.
You can select now a new programme.
Start the programme by pressing button 5
To start the selected programme, press this
button; the corresponding green indicator
light stops blinking.
The indicator light 3 illuminates to indicate
that the appliance starts operating and the
door is locked.
If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, the
message Err appears on the display
for a few seconds and the red indicator
light of the button 5 blinks 3 times.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must
PAUSE the appliance by pressing the button
5.
Changing a running programme is possible
only by resetting it. Turn the programme selector dial to O and then to the new programme position. Start the new programme
by pressing the button 5 again. The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 5 to interrupt a programme
which is running, the corresponding green
indicator light starts blinking.
Opening the door after the programme
has started
First set the machine to pause by pressing
the button 5.
If the indicator light 3 blinks and after a few
minutes goes off, the door can be opened.
If the indicator light 3 remains lit, this means
that the machine is already heating or that
the water level is too high. In any case, do
not try to force the door open!
If you cannot open the door but you need
to open it, you have to switch the machine
off by turning the selector dial to
. After
a few minutes the door can be opened.
After closing the door, it is necessary to select the programme and options again and
to press button 5.
Caution! Pay attention to the water
level and temperature!
At the end of the programme
The machine stops automatically. Some
acoustic signals sound and a blinking appears on the display, the indicator light of
button 5 and the indicator light 3 go off.
If a programme or an option that ends with
water left in the tub has been selected, the
indicator light 3 remains on and the door is
locked to indicate that the water must be
emptied out before opening the door.
To empty out the water:
1. Turn the programme selector dial to
.
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, by
pressing button 2.
4. Press button 5.
ENGLISH
14
Stand by : once the programme has finished after a few minutes the energy saving
system will be enabled. The brightness of
the display is reduced. By pressing any button the appliance will come out of the energy saving status.
At the end of the programme, the door is
released and can be opened. Turn the programme selector dial to
to switch the
machine off.
Remove the laundry from the drum and
carefully check that the drum is empty. If
you do not intend to carry out another
wash, close the water tap. Leave the door
open to prevent the formation of mildew
and unpleasant smells.
Helpful hints and tips
Grass: soap lightly and treat with bleach
(white cottons and fast coloureds only).
Ball point pen and glue: moisten with acetone1), lay the garment on a soft cloth and
dab the stain.
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with
bleach.
Ink: depending on the type of ink, moisten
the fabric first with acetone1), then with acetic acid; treat any residual marks on white
fabrics with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with
detergent paste.
Sorting out the laundry
Follow the wash code symbols on each garment label and the manufacturer’s washing
instructions. Sort the laundry as follows:
whites, coloureds, synthetics, delicates,
woollens.
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable to treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a
stain remover product then rub in the soap
and water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth
and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and
dab the stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since
the cellulose structure will already have
been damaged and the fabric tends to
hole.
Mould stains: treat with bleach, rinse well
(white cottons and fast coloureds only).
Characteristic
Degrees of water hardness
Water hardness is classified in so-called
“degrees” of hardness. Information on
hardness of the water in your area can be
obtained from the relevant water supply
company, or from your local authority.
Degrees of water hardness
German °dH
French °T.H.
Soft
0-7
0-15
Medium
8-14
16-25
1) do not use acetone on artificial silk
ENGLISH
15
Degrees of water hardness
Characteristic
German °dH
French °T.H.
Hard
15-21
26-37
Very hard
> 21
> 37
A water softener must be added when water has a medium-high degree of hardness.
Follow the manufacturer’s instructions. The quantity of detergent can then always be
adjusted (reduced) to degree of hardness soft.
Washing programmes
Coloured cotton
(normally-lightly
soiled items).
6 kg
3 kg1)
Spin
No Spin
Rinse Hold
Economy2)
Super
Quick
Prewash
Easy Iron
Extra Rinse
6 kg
3 kg1)
Spin
No Spin
Rinse Hold
Economy2)
Super
Quick
Prewash
Easy Iron
Extra Rinse
Detergent
Compartment
Cycle
Description
Main wash
Rinses
Max. final
spin at
1200 rpm
Available
Options
COTTONS
40°-30°-Cold
White cotton (heavy- Main wash
normally soiled
Rinses
items).
Max. final
spin at
1200 rpm
Max. Load
Red. Load1)
COTTONS
90°-60°
Type of
laundry
Programme/
Temperature
Please always refer to the care label symbol of your garment and select the washing
programme based on what it says.
3)
3)
Main wash
Rinses
Max. final
spin at 900
rpm
DELICATES
40°-30°-Cold
Delicate fabrics: for
example curtains.
Main wash
Rinses
Max. final
spin at 700
rpm
HANDWASH
30°-Cold
Special programme
for delicate fabrics
with «hand washing»
care symbol.
Main wash
Rinses
Max. final
spin at 900
rpm
WOOL
40°
Special programme
for wool garments
bearing the «Pure
new wool, nonshrink, appliance
washable» label.
Main wash
Rinses
Max. final
spin at 900
rpm
With this programme
it is possible to wash
items like pants,
shirts or jackets in
denim and also jersey realized with hitech materials.
Main wash
Rinses
Max. final
spin at 900
rpm
JEANS
40°
3 kg
1.5 kg1)
Spin
No Spin
Rinse Hold
Economy2)
Super
Quick
Prewash
Easy Iron
Extra Rinse
3 kg
1.5 kg1)
No Spin
Rinse Hold
Super
Quick
Prewash
Extra Rinse
2 kg
2 kg
3 kg
Detergent
Compartment
Available
Options
Synthetic or mixed
fabrics: underwear,
coloured garments,
non-shrink shirts,
blouses.
SYNTHETICS
60°-40°-30°Cold
Max. Load
Red. Load1)
Cycle
Description
16
Type of
laundry
Programme/
Temperature
ENGLISH
3)
3)
Spin
No Spin
Rinse Hold
Spin
No Spin
Rinse Hold
Spin
No Spin
Rinse Hold
Prewash
Extra
Rinse4)
3)
DRAIN
Prewash
Soak for
about 40
minutes
Stop with
water in the
tub
6 kg
With this programme
it is possible to rinse
and spin cotton garments which have
been washed by
hand. The appliance
performs some rinses, followed by a final long spin. The
spin speed can be
reduced.
Rinses
Max. final
spin at
1200 rpm
For emptying out the
water of the last
rinse in programmes
with the Rinse Hold
option selected.
Draining of
water
6 kg
6 kg
Detergent
Compartment
Special programme
for heavily soiled
laundry. The appliance performs a
soak at 30° C. At the
end of this time the
appliance will stop
automatically with
water left in the tub.
Before starting a
new washing programme, drain the
water.
Available
Options
Max. Load
Red. Load1)
RINSES
Cycle
Description
SOAK5)
30°
17
Type of
laundry
Programme/
Temperature
ENGLISH
3)
Spin
No Spin
Rinse Hold
Easy Iron
Extra Rinse
Max. final
Separate spin for
spin at
hand washed garments and after pro- 1200 rpm
grammes with the
Rinse Hold option selected. You can
choose the spin
speed by pressing
the relevant button
to adapt it to the
fabrics to be spun.
SPIN
Detergent
Compartment
Available
Options
Type of
laundry
Cycle
Description
Max. Load
Red. Load1)
18
Programme/
Temperature
ENGLISH
Spin
6 kg
1) If you select the SUPER QUICK option, we recommend you, to reduce the maximum load as indicated. (Red. load =
reduced load). Full loading is possible however with somewhat reduced cleaning results.
2) This option is not active at a temperature lower than 40° C.
3) If using liquid detergents, a programme without PREWASH must be selected.
4) The EXTRA RINSE option will be activated automatically.
5) Refer to the detergent dispenser drawer paragraph to pour the detergent for soak programme.
Consumption values
Programme
White Cottons 90°
Energy consumption
(KWh)
Water consumption Programme dura(litres)
tion (Minutes)1)
2.1
62
Cottons 60°
1.3
59
Cottons 60° +
ECONOMY 2)
1.02
45
Cottons 40°
0.75
59
Synthetics 40°
0.5
45
Delicates 40°
0.55
55
Wool/ Handwash 30°
0.3
50
For the duration
of the programmes, please
refer to the display on the control panel.
1) Without prewash option selected.
2) «Cottons + Economy» at 60°C with a load of 6 kg is the reference programme for the data entered in the energy
label, in compliance with CEI 456 standards.
The consumption data shown on this chart is to be considered purely indicative, as it
may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
ENGLISH
19
Care and cleaning
Warning! Switch the appliance off
before you carry out any cleaning or
maintenance work.
Maintenance Wash
With the use of low temperature washes it is
possible to get a build up of residues inside
the drum.
We recommend that a maintenance wash
be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash programme.
• Use a normal measure of detergent, must
be a powder with biological properties.
3
Use a stiff brush to
clean and remove
all washing powder
residue.
4
Flush out all the removed parts of the
dispenser drawer
under a tap to remove any traces of
accumulated powder.
5
Use the previous
brush to clean the
recess, ensuring
that upper and lower part of it is well
cleaned.
After having
cleaned the dispenser and the
drawer recess, replace it and run a
rinse programme
without any laundry
in the drum to flush
away any residue.
Cleaning the dispenser drawer and the
drawer recess
1
2
To remove the
drawer, press the
catch downwards
and pull it out.
To aid cleaning, remove also the top
part of the additive
compartment.
Cleaning the pump
Proceed as follows:
ENGLISH
1
20
4
1
Open the pump door.
Put a container below the recess of the
drain pump to collect the water that flows
out.
2
Pull back the drainage duct.
Unscrew the filter and remove it.
5
2
Remove fluff and objects from the pump.
Press the two levers and pull forward the
drainage duct to let the water flow out.
6
3
When the container is full of water, put
the drainage duct back again and empty
the container. Do steps 3 and 4 again
and again until no more water flows out
from the drain pump.
Make sure that the impeller of the pump
can turn. If this
does not occur, contact the service centre.
7
1
2
ENGLISH
21
Clean the filter under the water tap and
put it back in the pump into the special
guides.
Make sure that you tighten correctly the
filter to prevent leakages.
• Unscrew the hose from the appliance.
Keep a rag nearby because some water may flow.
• Clean the filter in the valve with a stiff
brush or with the piece of cloth.
8
3
35°
Close the pump door.
Cleaning the water inlet filters
If the appliance takes long to fill with water
or doesn't fill, the starting button indicator
light blinks in red. Check if the water inlet filters are blocked (see chapter "What to do
if..." for more details).
Proceed as follows:
1
2
• Turn off the water
tap.
• Unscrew the hose
from the tap.
• Clean the filter in
the hose with a
stiff brush.
• Screw firmly the
inlet hose back
onto the tap.
45°
• Screw the hose
back to the appliance turning it to
the left or the
right to suit the
installation. Tight
the locknut correctly to prevent
water leaks.
• Turn on the water
tap.
Frost precautions
If the machine is installed in a place where
the temperature could drop below 0° C, remove the remaining water from the inlet
hose and the drain pump.
1. disconnect the mains plug from the
mains socket.
2. close the water tap
3. unscrew the water inlet hose from the
tap;
4. put the two ends of the inlet hose in a
container and let the water flow out of
the hose.
5. empty the drain pump as described in
the ‘Emergency emptying out’ section.
6. when the drain pump is empty, install
the water inlet hose again.
Warning! Make sure that the
temperature is more than 0° C before
you use the appliance again.
The manufacturer is not responsible for
damages caused by low temperatures.
Emergency emptying out
If the appliance cannot drain the water,
proceed as follows to empty out the machine:
1. pull out the plug from the power socket;
2. close the water tap;
3. if necessary, wait until the water has
cooled down;
ENGLISH
4.
5.
6.
7.
22
open the pump door;
place a container on the floor below
the recess of the drain pump;
press the two levers and pull forward
the drainage duct to let the water flow
out;
when the container is full of water, put
the drainage duct back again and
empty the container;
repeat this operation until water stops
flowing out;
8.
if necessary clean the pump (refer to
the section ‘Cleaning the pump’ );
9. close the drain pump door.
When you drain the water with the emergency drain procedure, you must activate
again the drain system:
1. Put 2 litres of water in the main wash
compartment of the detergent dispenser.
2. Start the programme to drain the water.
What to do if…
The start of the appliance does not occur or
it stops during operation.
First try to find a solution to the problem (refer to the table). If not, contact the service
centre.
•
- The appliance does not drain the
water.
•
- The appliance door is open or not
closed correctly.
With some problems, the acoustic signals
operate and the display shows an alarm
code:
•
- The appliance does not fill with
water.
Warning! Switch off the appliance before you do the checks.
Problem
The appliance
does not fill:
The appliance
does not drain
the water:
Possible cause
Solution
The water tap is closed.
Open the water tap.
The inlet hose is squashed or
kinked.
Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
Clean the water inlet filters. (See
"Cleaning the water inlet filters"
for more details).
The water tap is blocked or is furred with limescale.
Clean the water tap.
The connection of the water inlet
hose is not correct.
Check the inlet hose connection.
The water pressure is too low.
Contact your local water authority.
The door is not properly closed.
Close the door firmly.
The drain hose is squashed or
kinked.
Check the drain hose connection.
The drain filter is clogged.
Clean the drain filter.
The connection of the drain hose is
not correct.
Check the drain hose connection.
ENGLISH
Problem
23
Possible cause
Solution
Select the draining or spinning
An option or a programme that
programme.
ends with the water still in the tub
or a that eliminates all the spinning
phases has been selected.
Close the door firmly.
The appliance
door is open or
not closed correctly.
The appliance
does not start:
The appliance
spinning phase
starts late or
does not start:
The plug is not properly inserted in
the power socket.
Insert the plug into the power
socket.
There is no power at the socket.
Please check your domestic electrical installation.
The main fuse has blown.
Replace the fuse.
The programme selector dial is not Please turn the selector dial and
correctly positioned and the button press the button 5 again.
5 has not been pressed.
The delay start has been selected.
If the laundry are to be washed
immediately, cancel the delay
start.
The Child Lock function is activated.
Deactivate the Child Lock function.
The electronic unbalance detection Redistribute the load manually or
device has cut in because the laun- load more laundry and select the
dry is not evenly distributed in the spin programme.
drum. The laundry is redistributed
by reverse rotation of the drum.
This may happen several times before the unbalance disappears
and normal spinning can resume.
If, after 10 minutes, the laundry is
still not evenly distributed in the
drum, the appliance will not spin.
Too much detergent or unsuitable
detergent (creates too much foam)
has been used.
There is water
on the floor:
Reduce the detergent quantity or
use another one.
Check whether there are any leaks Check the water inlet hose connecfrom one of the inlet hose fittings. It tion.
is not always easy to see this as
the water runs down the hose;
check to see if it is damp.
ENGLISH
Problem
The door will
not open:
The appliance
produces an
unusual noise
24
Possible cause
Solution
The drain or inlet hose is damaged.
Replace it with a new one (check
with the After Sales Service the
right spare part number).
The filter has not been properly
screwed in after cleaning action.
Screw the filter fully in.
The washing programme is still
running.
Wait the end of washing programme.
The door lock has not been released.
Wait a few minutes until the door
indicator light goes off.
There is water in the drum.
Select drain or spin programme to
empty out the water.
The transit bolts and packing have
not been removed.
Check the correct installation of the
appliance.
The support feet have not been
adjusted
Check the correct levelling of the
appliance.
The drain pump could be blocked.
Check the drain pump. (See
"Cleaning the pump" for more details).
Too little detergent or unsuitable
detergent has been used.
Increase the detergent quantity or
use another one.
Stubborn stains have not been
treated prior to washing.
Use commercial products to treat
the stubborn stains.
Unsatisfactory
washing results: The correct temperature was not
selected.
Excessive laundry load.
After the check, switch on the appliance
and press the button 5 to restart the programme.
If the malfunction shows again, contact your
After Sales Service.
Check if you have selected the correct temperature.
Reduce the laundry load in according to the "Washing Programmes table".
The necessary data for the service centre is
on the rating plate. We recommend that
you write the data here:
ENGLISH
25
Model description
(MOD): .....................
Product number (PNC): ...........................
Serial number (S.N.): ...............................
Made In Italy
© Inter IKEA Systems B.V. 1999
000.000.00
21552
Technical data
Dimensions
Water supply
pressure1)
Width (cm)
59.6
Height (cm)
84.5
Depth (cm)
48.4 max.
Minimum
Maximum
Cotton max. load (kg)
6
Max. spin speed (rpm)
1200
Energy class
A+
Washing class
A
Spinning class
B
Washing noise (dB(A))
56
Spinning noise (db(A))
75
Average annual energy
consumption (kWh)2)
204
Average annual water consumption (litres)2)
9000
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
1) If the pressure in your area is lower or higher, please contact your After Sales Service.
2) The data is based on the washing programme for test institutes assuming 200 cycles per a year.
Information on the electrical connection, voltage and overall power is given on the rating plate, on the inner edge of the appliance door.
ENGLISH
26
Installation
Caution! Refer to the assembly
instructions, in order to proceed with
the installation.
Warning! Make sure that mains plug is
disconnected from the mains socket
during installation.
If a repair is necessary, the appliance must
be easily accessible for the engineer. Put
the appliance adjacent to a water tap and
a drain.
Water inlet
1
Connect the hose to
a tap with 3/4"
thread.
2
Turn the inlet hose
to the left or the
right to suit the installation. Tight the
locknut correctly to
prevent water
leaks.
35°
45°
Caution! Do not place the inlet hose
downwards.
The inlet hose must not be lengthened.
If it is too short and you do not wish to
move the tap, you will have to purchase a
new, longer hose specially designed for this
type of use.
Water drainage
If you connect the
water drain hose to
a water trap under
A the sink, remove the
plastic membrane
(A). If you do not remove the membrane, detergent
residue and clothes
fluff can cause a
blockage in the
drain hose spigot.
Caution! Make sure that the water
couplings are tight to prevent water
leakage.
The drain hose may be extended to a
maximum of 4 metres. An additional
drain hose and joining piece is available
from your local Service Centre.
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agree with your domestic power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-way plugs, connectors
and extension cables. There is a risk of
fire.
• Do not replace or modify the mains cable
yourself. Contact the After Sales Service.
• Make sure that the mains plug and cable
is not squashed or damaged by the back
of the appliance.
• Make sure that the mains plug is accessible after installation.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.
• This appliance complies with the E.E.C.
Directives.
ENGLISH
Warning! The appliance is supplied
with a 13 amp plug attached. Use a 13
amp ASTA approved (BS 1362) fuse if it is
necessary to change the fuse in the plug
27
supplied. A cut off plug inserted into a 13
amp socket is a serious safety danger.
Make sure that it is disposed of safely.
Environment concerns
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Packaging materials
The materials with the symbol
are recyclable. Dispose the packaging in a suitable
collection containers to recycle it.
Disposal of the appliance
• To prevent the risk of physical injury or
damage:
– Disconnect the mains plug from the
mains socket.
– Cut off the mains cable and discard it.
– Discard the door catch. This prevents
children or small animals from being
closed inside of the appliance. There is
a risk of suffocation.
IKEA GUARANTEE
How long is the IKEA guarantee valid?
This guarantee is valid for five (5) years
from the original date of purchase of Your
appliance at IKEA, unless the appliance is
named LAGAN in which case two (2) years
of guarantee apply. The original sales receipt is required as proof of purchase. If
service work is carried out under guarantee,
this will not extend the guarantee period for
the appliance,
Which appliances are not covered by the
IKEA five (5) years guarantee?
The range of appliances named LAGAN
and all appliances purchased in IKEA before 1st of August 2007
Who will execute the service?
IKEA service provider will provide the service through its own service operations or
authorized service partner network.
What does this guarantee cover?
The guarantee covers faults of the appliance, which have been caused by faulty
construction or material faults from the date
of purchase from IKEA. This guarantee applies to domestic use only. The exceptions
are specified under the headline “What is
not covered under this guarantee?” Within
the guarantee period, the costs to remedy
the fault e.g. repairs, parts, labour and travel will be covered, provided that the appliance is accessible for repair without special
expenditure. On these conditions the EU
guidelines (Nr. 99/44/EG) and the respective local regulations are applicable. Replaced parts become the property of IKEA.
ENGLISH
What will IKEA do to correct the problem?
IKEA appointed service provider will examine the product and decide, at its sole discretion, if it is covered under this guarantee.
If considered covered, IKEA service provider
or its authorized service partner through its
own service operations, will then, at its sole
discretion, either repair the defective product or replace it with the same or a comparable product.
What is not covered under this
guarantee?
• Normal wear and tear.
• Deliberate or negligent damage, damage caused by failure to observe operating instructions, incorrect installation or by
connection to the wrong voltage, damage caused by chemical or electro-chemical reaction, rust, corrosion or water
damage including but not limited to damage caused by excessive lime in the water supply, damage caused by abnormal
environmental conditions.
• Consumable parts including batteries
and lamps.
• Non-functional and decorative parts
which do not affect normal use of the appliance, including any scratches and possible color differences.
• Accidental damage caused by foreign
objects or substances and cleaning or unblocking of filters, drainage systems or
soap drawers.
• Damage to the following parts: ceramic
glass, accessories, crockery and cutlery
baskets, feed and drainage pipes, seals,
lamps and lamp covers, screens, knobs,
casings and parts of casings. Unless such
damages can be proved to have been
caused by production faults.
• Cases where no fault could be found during a technician’s visit.
• Repairs not carried out by our appointed
service providers and/or an authorized
service contractual partner or where nonoriginal parts have been used.
• Repairs caused by installation which is
faulty or not according to specification.
28
• The use of the appliance in a non-domestic environment i.e. professional use.
• Transportation damages. If a customer
transports the product to their home or
other address, IKEA is not liable for any
damage that may occur during transport.
However, if IKEA delivers the product to
the customer's delivery address, then
damage to the product that occurs during
this delivery will be covered by this guarantee.
• Cost for carrying out the initial installation
of the IKEA appliance. However, if an
IKEA service provider or its authorized
service partner repairs or replaces the
appliance under the terms of this guarantee, the service provider or its authorized
service partner will re-install the repaired
appliance or install the replacement, if
necessary.
This restriction do not apply to fault-free
work carried out by a qualified specialist
using our original parts in order to adapt
the appliance to the technical safety specifications of another EU country.
How country law applies
The IKEA guarantee gives You specific legal
rights, which covers or exceed local demands. However these conditions do not
limit in any way consumer rights described
in the local legislation
Area of validity
For appliances which are purchased in one
EU country and taken to another EU country, the services will be provided in the
framework of the guarantee conditions normal in the new country. An obligation to
carry out services in the framework of the
guarantee exists only if the appliance complies and is installed in accordance with:
• the technical specifications of the country
in which the guarantee claim is made;
• the Assembly Instructions and User Manual Safety Information;
The dedicated After Sales Service for
IKEA appliances:
Please do not hesitate to contact IKEA After
Sales Service to:
ENGLISH
1.
make a service request under this guarantee;
2. ask for clarification on installation of the
IKEA appliance in the dedicated IKEA
kitchen furniture. The service won’t provide clarifications related to:
– the overall IKEA kitchen installation;
– connections to electricity (if machine
comes without plug and cable), to
water and to gas since they have to
be executed by an authorized service engineer.
3. ask for clarification on user manual contents and specifications of the IKEA appliance.
To ensure that we provide you with the best
assistance, please read carefully the Assembly Instructions and/or the User Manual
section of this booklet before contacting us.
How to reach us if You need our service
Please refer to the last page of this manual
for the full list of IKEA appointed contacts
and relative national phone numbers.
29
Important! In order to provide You with a
quicker service, we recommend that You
use the specific phone numbers listed at the
end of this manual. Always refer to the
numbers listed in the booklet of the specific
appliance You need an assistance for.
Before calling us, assure that You have to
hand the IKEA article number (8 digit code)
for the appliance of which you need our
assistance.
Important! SAVE THE SALES RECEIPT! It is
Your proof of purchase and required for the
guarantee to apply. Note that the receipt
reports also the IKEA article name and
number (8 digit code) for each of the
appliances you have purchased.
Do You need extra help?
For any additional questions not related to
After Sales of your appliances, please contact our nearest IKEA store call centre. We
recommend you read the appliance documentation carefully before contacting us.
30
Country
België
Belgique
Phone number
070 246016
Call Fee
Opening time
Binnenlandse gesprekskosten
8 tot 20 Weekdagen
Tarif des appels nationaux
8 à 20. En semaine
България
0700 10 218
Такса за повикване от страната
От 9 до 18 ч в работни дни
Česká republika
246 019721
Cena za místní hovor
8 až 20 v pracovních dnech
Danmark
70 15 09 09
Landstakst
man.-fre. 09.00-20.00
lør. 09.00-16.00
1 søndag pr. måned, normalt første
søndag i måneden
01803-334532
(0,09 € / Min.*) * aus dem Festnetz
der DTAG; Mobilfunkpreise
abweichend
8 bis 20 Werktage
Deutschland
Ελλάδα
211 176 8276
Υπεραστική κλήση
8 έως 20 κατά τις εργάσιμες ημέρες
España
91 1875537
Tarifa de llamadas nacionales
De 8 a 20 en días laborables
France
0170 36 02 05
Tarif des appels nationaux
9 à 21. En semaine
Ireland
0 14845915
National call rate
8 till 20 Weekdays
Ísland
5880503
Innanlandsgjald fyrir síma
9 til 18. Virka daga
02 00620818
Tariffa applicata alle chiamate
nazionali
dalle 8 alle 20 nei giorni feriali
Italia
Κυπρος
Magyarország
Nederland
Norge
22 030 529
Υπεραστική κλήση
8 έως 20 κατά τις εργάσιμες ημέρες
061 998 0549
Belföldi díjszabás
Hétköznap 8 és 10 óra között
0900 235 45 32
and/or
0900 BEL IKEA
"0,10 EUR/min (niet lokaal)
Incl. BTW"
ma-vr 9.00-21.00
zat 9.00-20.00
zon 9.00-18.00
815 22052
Takst innland
8 til 20 ukedager
Österreich
0810 300486
zum Ortstarif
8 bis 20 Werktage
Polska
012 297 8787
Stawka wg taryfy krajowej
Od 8 do 20 w dni robocze
Portugal
211557985
Chamada Nacional
9 às 21. Dias de Semana
*excepto feriados
România
0212121224
Tarif apel naţional
8 - 20 în zilele lucrătoare
8 495 6662929
Действующие телефонные
тарифы
с 8 до 20 по рабочим дням
Время московское
Россия
Schweiz
Suisse
031 5500 324
Svizzera
Slovensko
Tarif für Anrufe im Bundesgebiet
8 bis 20 Werktage
Tarif des appels nationaux
8 à 20. En semaine
Tariffa applicata alle chiamate
nazionali
dalle 8 alle 20 nei giorni feriali
(02) 3300 2554
Cena vnútroštátneho hovoru
8 až 20 v pracovných dňoch
Suomi
0207 85 1000
Kotimaan puhelun hinta
arkipäivisin 8.00-20.00
Sverige
0775 700 500
lokalsamtal (lokal taxa)
mån-fre 8.30-20.00
lör-sön 9.30-18.00
Türkiye
212 244 0769
Ulusal arama ücreti
Hafta içi saat 09:00'dan 18:00'a kadar
Україна
044 586 2078
Міжміськи дзвінки платні
9 - 21 В робочі дні
020 3347 0044
National call rate
9 till 21. Weekdays
United Kingdom
31
132939331-A-122011
© Inter IKEA Systems B.V. 2008
AA-504245-2
Download PDF

advertising