ZANUSSI ZWG3125S User Manual

Add to my manuals
28 Pages

advertisement

ZANUSSI ZWG3125S User Manual | Manualzz
132953770.qxd
25/03/2009
9.57
Pagina
User
Manual
Washing
machine
ZWG 3125 S
1
132953770.qxd
25/03/2009
9.57
Pagina
2
Thank you for selecting our appliance
We wish you lots of enjoyment with your new appliance and we hope that you will consider our
brand again when purchasing household appliances.
Please read this user manual carefully and keep it throughout the product life cycle as a reference
document. The user manual should be passed on to any future owner of the appliance.
The following symbols are used in this manual:
Important information concerning your personal safety and information on how to avoid
damaging the appliance.
General information and tips
Environmental information
Content
Safety information - - - - - - - - - - - - - - - - - - -3
Care and cleaning - - - - - - - - - - - - - - - - - -16
Description of the appliance - - - - - - - - - - - -5
Something not working - - - - - - - - - - - - - - 18
Detergent dispenser drawer - - - - - - - - - - - -5
Technical data- - - - - - - - - - - - - - - - - - - - - 21
Control panel and functions - - - - - - - - - - - -6
Consumption values - - - - - - - - - - - - - - - - 22
Programme table - - - - - - - - - - - - - - - - - -8-9
Installation instruction - - - - - - - - - - - - - - - 23
Programme information - - - - - - - - - - - - - -10
Environmental concerns - - - - - - - - - - - - - 26
Washing Hints - - - - - - - - - - - - - - - - - - - - -11
Guarantee/Customer service - - - - - - - - - - 27
Before the first use - - - - - - - - - - - - - - - - -13
European guarantee - - - - - - - - - - - - - - - - 30
Operating Sequence - - - - - - - - - - - - - - - -14
2
132953770.qxd
25/03/2009
9.57
Pagina
3
Safety information
In the interest of your safety and to ensure
the correct use, before installing and first
using the appliance, read this user manual
carefully, including its hints and warnings.
To avoid unnecessary mistakes and
accidents, it is important to ensure that all
people using the appliance are thoroughly
familiar with its operation and safety
features. Save these instructions and make
sure that they remain with the appliance if it
is moved or sold, so that everyone using it
through its life will be properly informed on
appliance use and safety.
General safety
●
●
●
●
●
●
●
It is dangerous to alter the specifications or
attempt to modify this product in any way.
During high temperature wash programmes
the door glass may get hot. Do not touch it!
Make sure that small pets do not climb into
the drum. To avoid this, please check into
the drum before using.
Any objects such as coins, safety pins, nails,
screws, stones or any other hard, sharp
material can cause extensive damage and
must not be placed into the machine.
Only use the advised quantities of fabric
softener and detergent. Damage to the fabric
can ensue if you over-fill. Refer to the
manufacturer’s recommendations of
quantities.
Wash small items such as socks, laces,
washable belts etc in a washing bag or
pillow case as it is possible for such items to
slip down between the tub and the inner
drum.
Do not use your washing machine to wash
articles with whalebones, material without
hems or torn material.
●
●
Always unplug the appliance and turn off the
water supply after use, clean and
maintenance.
Under no circumstances should you attempt
to repair the machine yourself. Repairs
carried out by inexperienced persons may
cause injury or serious malfunctioning.
Contact your local Service Centre. Always
insist on genuine spare parts.
Installation
●
●
●
●
●
●
●
●
●
This appliance is heavy. Care should be
taken when moving it.
When unpacking the appliance, check that it
is not damaged. If in doubt, do not use it and
contact the Service Centre.
All packing and transit bolts must be
removed before use. Serious damage can
occur to the product and to property if this is
not adhered to. See relevant section in the
user manual.
After having installed the appliance, check
that it is not standing on the inlet and drain
hose and the worktop is not pressing the
electrical supply cable.
If the machine is situated on a carpeted floor,
please adjust the feet in order to allow air to
circulate freely
Always be sure, that there is no water
leakage from hoses and their connections
after the installation.
If the appliance is installed in a location
subject to frost, please read the «dangers of
freezing» chapter.
Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
3
132953770.qxd
25/03/2009
9.57
Pagina
4
Use
●
●
●
●
●
●
●
This appliance is designed for domestic use.
It must not be used for purposes other than
those for which it was designed.
Only wash fabrics which are designed to be
machine washed. Follow the instructions on
each garment label.
Do not overload the appliance. See the
relevant section in the user manual.
Before washing, ensure that all pockets are
empty and buttons and zips are fastened.
Avoid washing frayed or torn articles and
treat stains such as paint, ink, rust, and
grass before washing. Underwired bras must
NOT be machine washed.
Garments which have been in contact with
volatile petroleum products should not be
machine washed. If volatile cleaning fluids
are used, care should be taken to ensure
that the fluid is removed from the garment
before placing in the machine.
Never pull the power supply cable to remove
the plug from the socket; always take hold of
the plug itself.
Never use the washing machine if the power
supply cable, the control panel, the working
surface or the base are damaged so that the
inside of the washing machine is accessible.
Child safety
●
●
●
4
This appliance is not intended for use by
person (including children) with reduced
physical sensory or mental capabilities or
lack of experience and knowledge unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
This washing machine is not intended for
use by young children or infirm persons
without supervision.
Young children should be supervised to
ensure that they do not play with the
appliance.
●
●
●
The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children danger of suffocation! Keep them out of
children’s reach
Keep all detergents in a safe place out of
children’s reach.
Make sure that children or pets do not climb
into the drum. To avoid this the machine
incorporates special feature.
To activate this
device, rotate the
button (without
pressing it) inside the
door clockwise until
the groove is
horizontal. If
necessary use a coin.
To disable this
device and restore
the possibility of
closing the door,
rotate the button anticlockwise until the
groove is vertical.
132953770.qxd
25/03/2009
9.57
Pagina
5
Description of the appliance
1
Detergent dispenser drawer
2
Control panel
3
Door opening handle
4
Drain pump
5
Adjustable feet
1
2
3
4
5
Detergent dispenser drawer
Prewash
Wash
Fabric Softener
5
132953770.qxd
25/03/2009
9.57
Pagina
6
Control panel and functions
+
30°
1200
900
700
+
40°
90°
50°
60°
+
1
ZWG 3125 S
2
3
4
5
6
7
Programme and temperature selector dial symbols:
= White/Coloured cottons,
= Delicates,
= Rinsing,
= Wool,
= Draining ,
= Synthetics,
= Handwash,
= Spinning
= «Prewash»,
= Jeans,
= «Economy»
= Sport intensive
= Cold Wash,
Key symbols Control Panel:
= «Spin reduction» button,
= «Rinse Hold» option,
= «Options» button,
= «Super Quick» option,
= «Easy Iron» button,
Rinse» button,
= «Start Pause» button
= «Extra
Information
Henceforth, the programme selector dial, the different buttons and the programme progress
display will be indicated in all the book with the relevant numbers given in this table:
1
Programme selector dial and
On/Off switch
2 Temperature selctor dial
6
●
●
The programme selector dial allows to select a programme
and/or to switch the machine on/off.
The temperature selector dial allows to select a temperature
suitable for the lundry to be washed.
132953770.qxd
25/03/2009
9.57
Pagina
7
Press this button repeatedly to change the spin speed, if you
want your laundry to be spun at a speed different from the
one proposed by the washing machine or to select Rinse
Hold option.
● The relevant light will light up.
●
Spin reduction button and
3 Rinse Hold option
By means of this button, you can select only one of the
options.
● The relevant light will light up.
●
4 Option button
5 Extra Rinse button
●
By means of this button, the machine performs some
additional rinses.
This button allows to start the selected programme; the
corresponding green pilot light stops flashing.
● This button interrupts also a programme which is running,
the corresponding green pilot light starts to flash.
●
6 Start/Pause button
7 Programme progress display
●
The different pilot lights illuminate depending on the running
programme phase.
Functions
Rinse hold
By selecting this option the water of the last
rinse is not emptied out to prevent the fabrics
from creasing. When the programme has
finished, the pilot light of button 6 is off and the
door is blocked to indicate that the water must
be emptied out.
EASY IRON
Selecting this option the laundry is gently
washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine
will perform additional rinses.
SUPER QUICK
Short cycle for lightly soiled items or for laundry
which needs only freshening up.
We recommend you to reduce the fabrics
loading.
EXTRA RINSE
The machine performs some additional rinses
during the washing cycle. This option is
recommended for people who are allergic to
detergents, and in areas where the water is
very soft.
Programme progress display (7)
(A)
Washing
(B)
Spinning/Rinsing
(C)
End
The light A illuminates after pressing button 6.
The light B is on when the machine is rinsing
or spinning.
The light C illuminates at the end of the
washing cycle.
7
132953770.qxd
25/03/2009
9.57
Pagina
8
Programme table
Programme/
Temperature
COTTONS
90° to Cold
(WHITE COTTONS)
+ PREWASH
90° to Cold
Economy
60° to 40°
Eco + PREWASH
60° to 40°
SYNTHETICS
60° to Cold
SYNTHETICS +
PREWASH
60° to Cold
DELICATES
40° to Cold
WOOL
40° to Cold
8
Type of laundry
Options
Description of
programme
White cottons(normally
soiled items)
Spin red./ Rinse Hold,
Easy Iron, Super Quick,
Extra Rinse
Main wash
Rinses
Long spin at the
maximum spin speed
White cotton (heavily
soiled cotton items)
Spin red./Rinse Hold,
Easy Iron, Super Quick,
Extra Rinse
Prewash, Main wash
Rinses
Long spin at the
maximum spin speed
White and fast
coloured cotton
(normally soiled cotton
items) ECONOMY
Spin red./Rinse Hold,
Easy Iron,
Extra Rinse
Main wash
Rinses
Long spin at the
maximum spin speed
Prewash, Main wash
White and fast coloured Spin red./Rinse Hold,
Rinses
cotton (heavily soiled
Long spin at the
Easy
Iron,
Extra
Rinse
cotton items)
maximum spin speed
Synthetic or mixed
fabrics
Spin red./Rinse Hold, Main wash
Easy Iron, Super Quick, Rinses
Short spin at 900 rpm
Extra Rinse
Synthetic or mixed
fabrics
Spin red./Rinse Hold, Prewash, Main wash
Easy Iron, Super Quick, Rinses
Short spin at 900 rpm
Extra Rinse
Delicate items
Programme for wool
«Pure new wool, nonshrink, machine
washable» label
Rinse Hold,
Super Quick,
Extra Rinse
Main wash
Rinses
Short spin at 700 rpm
Spin red./Rinse Hold
Main wash
Rinses
Short spin at 900 rpm
132953770.qxd
25/03/2009
9.57
Pagina
9
Programme table
Programme/
Temperature
Type of laundry
Options
Description of
programme
Special programme for
delicate fabrics with the
«hand washing» care
symbol
Spin red./Rinse Hold
Special programme for
jeans or dark colours
cotton items
Main wash
Spin red./ Rinse Hold, Rinses
Long spin at the
Easy iron
maximum spin speed
Special programme for
heavily soiled sportwear
items
Prewash
Spin red./ Rinse Hold, Main wash
Extra Rinse
Rinses
Short spin at 900 rpm
RINSES
Separate rinses cycle
with softener, if needed,
for hand washed cotton
items
Spin red./ Rinse Hold, Rinses
Long spin at the
Extra Rinse
maximum spin speed
DRAIN
For emptying out the
water
SPIN
Long spin at the max
speed for hand washed
cotton items
HANDWASH
40° to Cold
JEANS
40°
SPORT INTENSIVE
40° to Cold
O
Cancelling /
Switching off
of the machine
Main wash
Rinses
Short spin at 900 rpm
Draining of water
Spin reduction
Drain and long spin at
the maximum spin speed
To interrupt a running programme, to cancel an
incorrect option selection or to switch the machine
off,
Max loads for:
Cottons.......................................................6 kg
Synthetics and Delicates............................3 kg
Wool and Handwash . . . . . . . . . . . . . . . . .2 kg
Sport Intensive . . . . . . . . . . . . . . . . . . . . .3 kg
Max load for Jeans . . . . . . . . . . . . . . . . . 3 kg
Max load for Cottons + Super Quick . . . . .3 kg
Max load for Synthetics/
/Delicates + Super Quick . . . . . . . . . . . .1.5 kg
9
132953770.qxd
25/03/2009
9.57
Pagina
10
Programme information
Economy
Jeans
Sport Intensive
This programme can be selected for slightly or normally soiled cotton
items. The temperature will decrease and the washing time will be
extended. This allows to obtain a good washing efficiency by saving
energy.
Cotton cycle suitable for Jeans and dark coloured articles. With the
special rinsing phase of this program it is possible to remove any
residual trace of detergent on dark fabrics. We recommend you to
reduce the amount of load in order to obtain a good washing
performance.
This programme is suitable for washing heavily soiled sport items. The
machine will add automatically a prewash phase before the main
wash to eliminate mud stains.
Important:
We recommend you NOT to put the detergent into the compartment
of the detergent drawer in order to rinse the laundry before the main wash
with only water .
Rinses
With this separate programme it is possible to rinse and spin cotton
garments which have been washed by hand. The machine performs
3 rinses, followed by a final spin at maximum speed. The spin speed
can be reduced by depressing button 3.
Drain
For emptying out the water at the end of a programme with Rinse
Hold option.
Turn first the programme selector dial to «O», then select
programme «Drain» and depress the button 6.
Spin
Separate spin for cotton items washed by hand.
According to the type of fabric, it is possible to choose a different
speed by means of the relevant button from one proposed by the
machine. This programme can be selected for emptying out the water
at the end of a programme with Rinse Hold option.
10
132953770.qxd
25/03/2009
9.57
Pagina
11
Washing hints
Sorting the laundry
Maximum loads
Follow the wash code symbols on each
garment label and the manufacturer’s washing
instructions. Sort the laundry as follows: whites,
coloureds, synthetics, delicates, woolen.
Recommended loads are indicated in the
programme charts.
General rules:
Cotton, linen: drum full but not too tightly
packed;
Synthetics: drum no more than half full;
Delicate fabrics and woolen: drum no more
than one third full.
Washing a maximum load makes the most
efficient use of water and energy.
For heavily soiled laundry, reduce the load
size.
Temperatures
90° or 95°
for normally soiled white cottons
and linen (e.g. tea cloths, towels,
tablecloths, sheets...)
50°/60°
for normally soiled, colour fast
garments (e.g. shirts, night
dresses, pyjamas....) in linen,
cotton or synthetic fibres and for
lightly soiled white cotton (e.g.
underwear).
30°-40°
for delicate items (e.g. net
curtains), mixed laundry including
synthetic fibres and woolen
bearing the label «pure new wool,
machine washable, non-shrink».
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first wash;
they should therefore be washed separately
the first time.
Make sure that no metal objects are left in
the laundry (e.g. hair clips, safety pins,
pins). Button up pillowcases, close zip
fasteners, hooks and poppers. Tie any belts
or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove hooks
or tie them up in a bag or net.
Laundry weights
The following weights are indicative:
bathrobe
napkin
quilt cover
sheet
pillow case
tablecloth
towelling towel
tea cloth
night dress
ladies’ briefs
man’s work shirt
man’s shirt
man’s pyjamas
blouse
men’s underpants
1200 g
100 g
700 g
500 g
200 g
250 g
200 g
100 g
200 g
100 g
600 g
200 g
500 g
100 g
100 g
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable to
treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a
special detergent then rub in the soap and
water.
11
132953770.qxd
25/03/2009
9.57
Pagina
12
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and
dab the stain; treat several times.
Dried grease stains: moisten with turpentine,
lay the garment on a soft surface and dab the
stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since the
cellulose structure will already have been
damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone (*), lay the garment on a soft cloth and
dab the stain.
Lipstick: moisten with acetone as above, then
treat stains with methylated spirits. Remove
any residual marks from white fabrics with
bleach.
Red wine: soak in water and detergent, rinse
and treat with acetic or citric acid, then rinse.
Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the
fabric first with acetone (*), then with acetic
acid; treat any residual marks on white fabrics
with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub with
detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the
environment. Although biodegradable,
detergents contain substances which, in large
quantities, can upset the delicate balance of
nature.
The choice of detergent will depend on the
type of fabric (delicates, woolen, cottons, etc.),
12
the colour, washing temperature and degree of
soiling.
All commonly available washing machine
detergents may be used in this appliance:
● powder detergents for all types of fabric,
● powder detergents for delicate fabrics (60°C
max) and woolen,
● liquid detergents, preferably for low
temperature wash programmes (60°C max)
for all types of fabric, or special for woolen
only.
The detergent and any additives must be
placed in the appropriate compartments of the
dispenser drawer before starting the wash
programme.
If using concentrated powder or liquid
detergents, a programme without prewash
must be selected.
The washing machine incorporates a
recirculation system which allows an optimal
use of the concentrated detergent.
Pour liquid detergent into the dispenser drawer
compartment marked
just before starting
the programme.
Any fabric softener or starching additives must
be poured into the compartment marked
before starting the wash programme.
Follow the product manufacturer’s
recommendations on quantities to use and do
not exceed the «MAX» mark in the
detergent dispenser drawer.
132953770.qxd
25/03/2009
9.57
Pagina
13
Quantity of detergent to be used
The type and quantity of detergent will depend
on the type of fabric, load size, degree of
soiling and hardness of the water used.
Water hardness is classified in so-called
«degrees» of hardness. Information on
hardness of the water in your area can be
obtained from the relevant water supply
company, or from your local authority.
Follow the product manufacturers’ instructions
on quantities to use.
Degrees of water hardness
Follow the product manufacturers’ instructions
on quantities to use.
Degrees
Level
Characteristic
German
°dH
French
°T.H.
1
soft
0-7
0-15
2
medium
8-14
16-25
3
hard
15-21
26-37
4
very hard
> 21
> 37
Use less detergent if:
● you are washing a small load,
● the laundry is lightly soiled,
● large amounts of foam form during washing.
Before the first use
WARNING!
Ensure that the electrical and water
connections comply with the installation
instructions.
IMPORTANT!
Remove the polystyrene block and any
material from the drum.
IMPORTANT!
We recommend you to pour 2 litres of water
into the main wash compartment
, of the
detergent drawer in order to activate the ECO
valve. Than run a cotton cycle at 90°C, without
any laundry in the machine, to remove any
manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the
dispenser drawer and start the machine.
13
132953770.qxd
25/03/2009
9.57
Pagina
14
Operating sequence
Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in
the drum, one item at
a time, shaking them
out as much as
possible. Close the door.
Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
pour it into the main wash compartment
and, if you wish to carry out a programme with
the prewash, pour it into the compartment
marked
.
If required, pour fabric softener into the
compartment marked
(the amount used
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
Select the required programme by means of
the programme selector dial (1)
Turn the programme selector dial to the
required programme.
The green light of button 6 starts to flash.
It can be turned either clockwise or
anticlockwise.
On position «O» the programme is reset and
the machine is switched OFF.
14
At the end of the programme the selector
dial must be turned to position «O», to
switch the machine off.
ATTENTION!
If you turn the programme selector dial to
another programme when the machine is
working, the red pilot light of button will flash 3
times to indicate a wrong selection. The
machine will not perform the new selected
programme.
Select the required temperature by means
of the temperature selector dial (2)
Turn the programme selector dial to the
required temperature. It is possible to select a
temperature from 90°C to Cold.
For the maximum temperature allowed by
each programme, refer to the section
«Programmes table».
Select the spin speed or Rinse Hold option
by pressing button 3
The relevant light will light up.
When selecting a programme, the light
corresponding to the maximum speed allowed
for that programme will illuminate (refer to the
section «Programme table» for the maximum
allowed spin speed).
Select the desired option by means of
buttons 4 and 5
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired programme
and before pressing the button 6.
For the compatibility of the options with the
washing programmes, refer to the section
«Programme table».
132953770.qxd
25/03/2009
9.57
Pagina
15
Start the programme by pressing button 6
To start the selected programme, press this
button; the corresponding green pilot light
stops flashing.
On programme progress display the pilot light
A illuminates to indicate that the appliance
starts operating and the door is locked.
IMPORTANT!
If an option which is not compatible with the set
wash programme is selected, the red light of
this button flashes for 3 times.
Altering an option or a running programme
It is possible to change any option before the
programme carries it out.
Before you make any change, you must pause
the washing machine by pressing the button 6.
Changing a running programme is possible
only by resetting it. Turn the programme
selector dial to «O» and then to the new
programme position. Start the new programme
by depressing the button 6 again.
The washing water in the tub will not empty
out.
Interrupting a programme
Press the button 6 to interrupt a programme
which is running, the corresponding light starts
to flash. Press the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to «O» to cancel a
programme which is running. Now you can
select a new programme.
If the machine is already heating, that the
water level is above the bottom edge of the
door, the door cannot be opened.
If you cannot open the door but you need to
open it you have to switch the machine off by
turning the selector dial to «O». After few
minutes the door can be opened
(Pay attention to the water level and
temperature!).
After this procedure, it will be necessary to set
the programme and the options again and then
press the button 5.
At the end of the programme
The machine stops automatically.
The pilot light of button 6 goes off while the
phase light C illuminates. The door can be
opened.
If at the end of a programme there is water in
the tub, to empty out the water follow the
following instructions:
● turn the programme selector dial to «O»
● select the «Drain» or «Spin» programme
● reduce the spin speed if needed, by means
of the relevant button
● press button 6
At the end of the cycle, turn the programme
selector dial to «O» to switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty.
If you do not intend to carry out another wash,
close the water tap.
Leave the door open to prevent the formation
of mildew and unpleasant smells.
Opening the door after the programme has
started
First set the machine to pause by pressing the
button 6.
After some minutes, the door can be opened.
15
132953770.qxd
25/03/2009
9.58
Pagina
16
Care and cleaning
IMPORTANT!
You must DISCONNECT the appliance from
the electricity supply, before you can carry out
any cleaning or maintenance work.
Remove the drawer by pressing the catch
downwards and by pulling it out. Flush it out
under a tap, to remove any traces of
accumulated powder.
Descaling
The water we use normally contains lime. It is
a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder
manufacturer's instructions. This will help to
prevent the formation of lime deposits.
Cleaning the drawer recess
Maintenance Wash
With the use of low temperature washes it is
possible to get a build up of residues inside the
drum.
We recommend that a maintenance wash be
performed on a regular basis.
To run a maintenance wash:
● The drum should be empty of laundry.
● Select the hottest cotton wash programme.
● Use a normal measure of detergent, must be
a powder with biological properties.
External cleaning
Clean the exterior cabinet of the appliance with
soap and water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser
drawer should be cleaned regularly.
To aid cleaning, the top part of the additive
compartment should be removed.
16
Having removed the
drawer, use a small
brush to clean the
recess, ensuring that
all washing powder
residue is removed
from the upper and
lower
part of the recess.
Replace the drawer and run the rinse
programme without any clothes in the drum.
Cleaning the pump
The pump should be inspected if
● the machine does not empty and/or spin
● the machine makes an unusual noise during
draining due to objects such as safety pins,
coins etc. blocking the pump.
Proceed as follows:
● Disconnect the appliance.
● If necessary wait until the water has cooled
down.
● Open the pump
door.
● Place a container
close to the pump to
collect any spillage.
● Pull out the
emergency emptying
hose, place it in the
container and remove its cap.
● When no more water comes out, unscrew the
pump cover and remove it. Always keep a
rag nearby to dry up spillage of water when
removing the cover.
132953770.qxd
●
●
25/03/2009
9.58
Pagina
17
Remove any objects from the pump impeller
by rotating it.
Put the cap back on the emergency emptying
hose and place the latter back in its seat.
● Screw the pump
cover fully in.
● Close the pump
door.
IMPORTANT!
When the appliance is in use and depending
on the programme selected there can be hot
water in the pump.
Never remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When
replacing the cover, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains traces of
lime deposit, the water inlet filter may become
clogged. It is therefore a good idea to clean it
from time to time.
Turn off the water tap.
Unscrew the water
inlet hose. Clean the
filter using a hard
bristle brush.
Tighten up the inlet
hose.
The dangers of freezing
If the machine is exposed to temperatures
below 0°C, certain precautions should be taken.
● Turn off the water tap.
● Unscrew the inlet hose.
● Place the end of the emergency emptying
hose and that of the inlet hose in a bowl
placed on the floor and let water drain out.
● Screw the water inlet hose back on and
reposition the emergency emptying hose
after having put the cap on again.
● When you intend to start the machine up
again, make sure that the room temperature
is above 0°C.
IMPORTANT!
Every time you drain the water through the
emergency emptying hose you must pour 2
litres of water into the main wash compartment
of the detergent drawer and then run the drain
programme. This will activate the ECO VALVE
device avoiding that part of the detergent
remains unused at next washing.
Emergency emptying out
If the water is not discharged, proceed as
follows to empty out the machine:
● pull out the plug from the power socket;
● close the water tap;
● if necessary, wait until the water has cooled
down;
● open the pump door;
● place a bowl on the floor and place the end
of the emergency emptying hose into the
bowl. Remove its cap. The water should
drain by gravity into the bowl. When the bowl
is full, put the cap back on the hose. Empty
the bowl. Repeat the procedure until water
stops flowing out;
● clean the pump if necessary as previously
described;
● replace the emergency emptying hose in its
seat after having plugged it;
● screw the pump cover again and close the
door.
17
132953770.qxd
25/03/2009
9.58
Pagina
18
Something not working
IMPORTANT!
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Centre, please carry out the
checks listed below.
During machine operation it is possible that the red pilot light of button 6 flashes to indicate that
the machine is not working.
Once the problem has been eliminated, press the button 6 to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
Malfunction
Possible Cause / Solution
The door has not been closed. (Red pilot light
flashes)
● Close firmly the door.
The plug is not properly inserted in the power socket.
● Insert the plug into the power socket.
The washing machine does not start:
There is no power at the socket.
● Please check your domestic electrical installation.
The main fuse has blown.
● Replace the fuse.
The selector dial is not correctly positioned and the
button 6 has not been pressed.
● Please turn the selector dial and press the button 6
again.
The water tap is closed. (Red pilot light flashes)
● Open the water tap.
The inlet hose is squashed or kinked. (Red pilot light
flashes)
● Check the inlet hose connection.
The machine does not fill:
The machine fills then empties
immediately:
18
The filter in the inlet hose is blocked. (Red pilot light
flashes)
● Clean the water inlet hose filter.
The door is not properly closed. (Red pilot light
flashes)
● Close firmly the door.
The end of the drain hose is too low.
● Refer to relevant paragraph in «water drainage»
section.
132953770.qxd
25/03/2009
9.58
Pagina
Malfunction
19
Possible Cause / Solution
The drain hose is squashed or kinked. (Red pilot
light flashes)
● Check the drain hose connection.
The machine does not empty and/or
does not spin:
The drain pump is clogged. (Red pilot light flashes)
● Clean the drain pump.
The laundry is not evenly distributed in the drum.
● Redistribute the laundry.
The «Rinse Hold» option has been selected.
● Disable the option.
● Select the «Drain» or «Spin» programme.
Too much detergent or unsuitable detergent (creates
too much foam) has been used.
● Reduce the detergent quantity or use another one.
There is water on the floor:
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this as
the water runs down the hose; check to see if it is
damp.
● Check the water inlet hose connection.
The inlet hose is damaged.
● Change it with a new one.
The cap on the emergency emptying hose has not
been replaced after cleaning the pump.
● Put the cap back on the emergency emptying and
place the latter back in its seat.
Too little detergent or unsuitable detergent has been
used.
● Increase the detergent quantity or use another one.
Unsatisfactory washing results:
Stubborn stains have not been treated prior to
washing.
● Use commercial products to treat the stubborn
stains.
The correct temperature was not selected.
● Check if you have selected the correct temperature.
Excessive laundry load.
● Introduce into the drum less laundry.
19
132953770.qxd
25/03/2009
9.58
Pagina
Malfunction
The door will not open:
20
Possible Cause / Solution
The programme is still running.
● Wait the end of washing cycle.
The door lock has not been released.
● Wait until the door is released.
There is water in the drum.
● Select drain or spin programme to empty out the
water.
The transit bolts and packing have not been
removed.
● Check the correct installation of the appliance.
The machine vibrates or is noisy:
The support feet have not been adjusted.
● Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
● Redistribute the laundry.
Maybe there is very little laundry in the drum.
● Load more laundry.
Spinning starts late or the machine
does not spin:
The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rotation
of the drum. This may happen several times before
the unbalance disappears and normal spinning can
resume. If, after 10 minutes, the laundry is still not
evenly distributed in the drum, the machine will not
spin. In this case, redistribute the load manually and
select the spin programme.
● Redistribute the laundry.
The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a softer
The machine makes an unusual noise
start and more even distribution of the laundry in the
drum when spinning, as well as increased stability of
the machine.
No water is visible in the drum
20
Machines based on modern technology operate very
economically using very little water without affecting
performance.
...
If you are unable to identify or solve the
problem, contact our service centre.
Before telephoning, make a note of the model,
serial number and purchase date of your
machine: the Service Centre will require this
information.
...
21
...
Pagina
No.
9.58
..
Ser.
25/03/2009
Mod.
Prod ...
. No. ... ...
...
...
132953770.qxd
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
Technical data
Dimensions
Width
60 cm
Height
85 cm
Depth (including the porthole)
63 cm
Electrical connection Voltage Overall power - Fuse
Information on the electrical connection is given on the rating
plate on the inner edge of the appliance door
Water supply pressure
Minimum
0,05 MPa
Maximum
0,8 MPa
Maximum Load
Cotton
Spin Speed
Maximum
6
0
kg
1200 rpm
21
132953770.qxd
25/03/2009
9.58
Pagina
22
Consumption values
Energy
consumption
(in kWh)
Water
consumption
(in litres)
Programme
duration
Cotton 90°
2.0
61
135
Cotton 90° + Prewash
2.15
71
155
Eco 60° (*)
1.02
46
155
Eco 60° + Prewash
1.20
64
175
Synthetics 60°
1.0
54
90
Synthetics 60° + Prewash
1.2
65
107
Delicates 40°
0.55
60
65
Wool 40°
0.4
53
60
Handwash 40°
0.4
53
60
Jeans 40°
0.55
55
110
Sport Intensive 40°
0.65
59
100
Rinses
0.1
42
45
Drain
-
-
2
Spin
-
-
10
Programme
Infos
The consumption data shown on this chart is
to be considered purely indicative, as it may
vary depending on the quantity and type of
laundry, on the inlet water temperature and on
the ambient temperature. It refers to the
highest temperature for each wash
programme.
22
(*) The «Cotton Eco» at 60°C with a load of 6
kg is the reference programme for the data
entered in the energy label, in compliance
with EEC 92/75 standards.
132953770.qxd
25/03/2009
9.58
Pagina
23
Installation instruction
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever
has to be transported again.
1. After removing all the packaging, carefully
lay machine on it’s back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable and the
draining hose from the hose holders on the
rear of the appliance.
6. Fill the smaller upper hole and the two large
ones with the corresponding plastic plug
caps supplied in the bag containing the
instruction booklet.
Positioning
Install the machine on a flat hard floor. Make
sure that air circulation around the machine is
not impeded by carpets, rugs etc. Check that
the machine does not touch the wall or other
kitchen units. Level the washing machine by
raising or lowering the feet. The feet may be
tight to adjust as they incorporate a self locking
nut, but the machine MUST be level and
stable.
Any necessary adjustment can be made with a
spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
Never place cardboard, wood or similar
materials under the machine to compensate for
any unevenness in the floor.
If necessary, check the
setting with a spirit
level.
3. Unscrew the three bolts.
4. Slide out the relevant plastic spacers.
Water inlet
An inlet hose is supplied and can been found
on the back of the appliance.
Do not use the hose from your previous
machine to connect to the water supply.
5. Open the porthole and remove the
polystyrene block fitted with the adhesive
tape on the door seal.
23
132953770.qxd
25/03/2009
9.58
Pagina
24
attaching it to the wall.
Attention !
Do not place the inlet hose downwards.
Angle the hose to the left or right
depending on the position of your water
tap.
1. Set the hose correctly by loosening the ring
nut. After positioning the inlet hose, be sure
to tighten the ring nut again to prevent
leaks.
2.Connect the hose to
a tap with a 3/4”
thread. Always use
the hose supplied
with the appliance.
The inlet hose must not be lengthened. If it is
too short and you do not wish to move the tap,
you will have to purchase a new, longer hose
specially designed for this type of use.
Water drainage
The end of the drain hose can be positioned in
three ways:
Hooked over the
edge of a sink using
the plastic hose
guide supplied with
the machine. In this
case, make sure the
end cannot come
unhooked when the
machine is emptying. This could be done by
tying it to the tap with a piece of string or
24
In a sink drain pipe branch. This branch must
be above the trap so that the bend is at least
60 cm above the ground.
Directly into a drain pipe at a height of not
less than 60 cm and not more than 90 cm. The
end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain
pipe must be larger than the outside diameter
of the drain hose.
The drain hose must not be kinked.
Electrical connection
This machine is designed to operate on a 230
V, single-phase, 50 Hz supply.
Check that your domestic electrical installation
can take the maximum load required (2.2 kW),
also taking into account any other appliances
in use.
Attention!
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
Attention!
Should the appliance power supply cable need
to be replaced, this MUST be carried out by
our Service Centre.
NOTE
Please ensure that when the appliance is
installed it is easily accessible for the engineer
in the event of a breakdown.
132953770.qxd
25/03/2009
9.58
Pagina
25
Environmental concerns
Packaging materials
The materials marked with the symbol
are
recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by
disposing of them properly in appropriate
collection containers.
Old machine
Use authorised disposal sites for your old
appliance. Help to keep your country tidy!
The symbol
on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product.
For more detailed information about recycling
of this product, please contact your local city
office, your household waste disposal service
or the shop where you purchased the product.
Ecological hints
To save water, energy and to help protect the
environment, we recommend that you follow
these tips:
● Normally soiled laundry may be washed
without prewashing in order to save
detergent, water and time (the environment
is protected too!).
● The machine works more economically if it is
fully loaded.
● With adequate pre-treatment, stains and
limited soiling can be removed; the laundry
can then be washed at a lower temperature.
● Measure out detergent according to the
water hardness, the degree of soiling and
the quantity of laundry being washed.
25
132953770.qxd
25/03/2009
9.58
Pagina
26
European guarantee
This appliance is guaranteed by Electrolux in
each of the countries listed at the back of this
user manual, for the period specified in the
appliance guarantee or otherwise by law. If you
move from one of these countries to another of
the countries listed, the appliance guarantee
will move with you subject to the following
qualifications:
●
●
●
●
The appliance guarantee starts from the date
you first purchased the appliance which will
be evidenced by production of a valid
purchase document issued by the seller of
the appliance.
The appliance guarantee is for the same
period and to the same extent for labour and
parts as exists in your new country of
residence for this particular model or range
of appliances.
The appliance guarantee is personal to the
original purchaser of the appliance and
cannot be transferred to another user.
The appliance is installed and used in
accordance with instructions issued by
Electrolux and is only used within the home,
i.e. is not used for commercial purposes.
26
●
The appliance is installed in accordance with
all relevant regulations in force within your
new country of residence.
The provisions of this European Guarantee do
not affect any of the rights granted to you by
law.
132953770.qxd
25/03/2009
9.58
Pagina
27
www.electrolux.com
à
Albania
+35 5 4 261 450
Rr. Pjeter Bogdani Nr. 7 Tirane
Belgique/België/Belgien
+32 2 363 04 44
Bergensesteenweg 719, 1502 Lembeek
Česká republika
+420 2 61 12 61 12
Budějovická 3, Praha 4, 140 21
Danmark
+45 70 11 74 00
Sjællandsgade 2, 7000 Fredericia
Deutschland
+49 180 32 26 622
Muggenhofer Str. 135, 90429 Nürnberg
Eesti
+37 2 66 50 030
Mustamäe tee 24, 10621 Tallinn
España
+34 902 11 63 88
Carretera M-300, Km. 29,900 Alcalá de Henares Madrid
France
www.electrolux.fr
Great Britain
+44 8705 929 929
Addington Way, Luton, Bedfordshire LU4 9QQ
Hellas
+30 23 10 56 19 70
4, Limnou Str., 54627 Thessaloniki
Hrvatska
+38 51 63 23 338
Slavonska avenija 3, 10000 Zagreb
Ireland
+353 1 40 90 753
Longmile Road Dublin 12
Italia
+39 (0) 434 558500
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Latvija
+37 17 84 59 34
Kr. Barona iela 130/2, LV-1012, Riga
Lituania
+370 5 27 80 609
Verkiu,2 9, 09108 Vilnius, Lithuania
Luxembourg
+35 2 42 43 13 01
Rue de Bitbourg, 7, L-1273 Hamm
Magyarország
+36 1 252 1773
H-1142 Budapest XIV, Erzsébet királyné útja 87
Nederland
+31 17 24 68 300
Vennootsweg 1, 2404 CG - Alphen aan den Rijn
Norge
+47 81 5 30 222
Risløkkvn. 2 , 0508 Oslo
Österreich
+43 18 66 400
Herziggasse 9, 1230 Wien
Polska
+48 22 43 47 300
ul. Kolejowa 5/7, Warsaw
Portugal
+35 12 14 40 39 39
Quinta da Fonte - Edificio Gonçalves Zarco - Q35 -2774-518 Paço de Arcos
Romania
+40 21 451 20 30
Str. Garii Progresului 2, S4, 040671 RO
Schweiz-Suisse-Svizzera
+41 62 88 99 111
Industriestrasse 10, CH-5506 Mägenwil
Slovenija
+38 61 24 25 731
Tr aška 132, 1000 Ljubljana
Slovensko
+421 2 43 33 43 22
Electrolux Slovakia s.r.o., Electrolux Domáce spotrebiče SK, Seberíniho 1, 821 03 Bratislava
Suomi
www.electrolux.fi
Sverige
+46 (0)771 76 76 76
Electrolux Service, S:t Göransgatan 143, S-105 45 Stockholm
Türkiye
+90 21 22 93 10 25
Tarlabași caddesi no : 35 Taksim Istanbul
Россия
+7 095 937 7837
129090 Москва, Олимпийский проспект, 16, БЦ “Олимпик”
27
132953770.qxd
25/03/2009
9.58
Pagina
28
www.electrolux.com
www.zanussi.tr
132 953 770 - 00 - 132008
Subject to change without notice

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement