Zanussi | ZKG7145 | User manual | ZANUSSI ZKG7165 User Manual

EN
User manual
Washer-dryer
ZKG 7125
ZKG 7145
ZKG 7165
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Washing Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7
Automatic Drying programmes _ _ _ _ _ _ _ _ _ _ _ _ 9
Drying Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Drying Hints _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12
Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Daily Use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Use - Drying _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _
13
13
15
16
19
23
23
24
27
Subject to change without notice
Safety information
Important! Read carefully & keep for future reference.
• The safety of Your appliance complies with the industry
standards and with legal requirements on the safety of
appliances. However, as manufacturers, we feel it is
our duty to provide the following safety notes.
• It is most important that this instruction book should
be retained with the appliance for future reference.
Should the appliance be sold or transferred to another
owner, or should you move house and leave the appliance, always ensure that the book is supplied with the
appliance in order that the new owner can get to know
the functioning of the appliance and the relevant warnings.
• You MUST read them carefully before installing or using the appliance.
• Before first starting up, check the appliance for any
damage incurred during transport. Never connect up a
damaged appliance . If parts are damaged, contact your
supplier.
• If the appliance is delivered in the winter months when
there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.
General safety
• It is dangerous to alter the specifications or attempt to
modify this product in any way.
• During high temperature wash programmes the door
glass may get hot. Do not touch it!
• Make sure that small pets and children do not climb
into the drum. To avoid this, please check into the
drum before using.
2
• Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
• Only use the advised quantities of fabric softener and
detergent. Damage to the fabric can ensue if you overfill. Refer to the manufacturer’s recommendations of
quantities.
• Wash small items such as socks, laces, washable belts
etc in a washing bag or pillow case as it is possible for
such items to slip down between the tub and the inner
drum.
• Do not use your washing machine to wash articles with
whalebones, material without hems or torn material.
• Always unplug the appliance and turn off the water
supply after use, cleaning and maintenance.
• Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
• This appliance is heavy. Care should be taken when
moving it.
• When unpacking the appliance, check that it is not
damaged. If in doubt, do not use it and contact the
Service Centre.
• All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in the user manual.
• After having installed the appliance, check that it is not
standing on the inlet and drain hose and the worktop is
not pressing the electrical supply cable against the
wall.
• If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely
under the appliance.
• Always be sure, that there is no water leakage from hoses and their connections after the installation.
• If the appliance is installed in a location subject to
frost, please read the “dangers of freezing” chapter.
• Any plumbing work required to install this appliance
should be carried out by a qualified plumber or competent person.
• Any electrical work required to install this appliance
should be carried out by a qualified electrician or competent person.
Use
• This appliance is designed for domestic use. It must
not be used for purposes other than those for which it
was designed.
• Only wash and dry fabrics which are designed to be
machine washed or dried. Follow the instructions on
each garment label
• Do not overload the appliance. See the Washing Programme Table.
• Before washing, ensure that all pockets are empty and
buttons and zips are fastened. Avoid washing frayed or
torn articles and treat stains such as paint, ink, rust,
and grass before washing. Underwired bras must NOT
be machine washed.
• Garments which have been in contact with volatile petroleum products should not be machine washed. If
volatile cleaning fluids are used, care should be taken
to ensure that the fluid is removed from the garment
before placing in the machine.
• As some duvets and eiderdowns should be washed/
dried in large commercial machines because of their
bulk, please check with the manufacturer of the item
before washing in a domestic machine.
• The users should always check that they have not left
their gas lighters (disposable or otherwise) in their
clothing.
• Never tumble dry items that have had contact with
chemicals such as dry cleaning fluid. These are of a
volatile nature and could cause an explosion. Only
tumble dry items which have been washed in water or
require airing.
• Plastic detergent dispensers should not remain in the
drum during the drying cycle, as the plastic used is not
designed to withstand the heat. If you wish to washthrough-to-dry you should use the conventional detergent dispenser drawer.
• Never pull the power supply cable to remove the plug
from the socket; always take hold of the plug itself.
• Never use your new appliance if the power supply cable, the control panel, the working surface or the base
are damaged so that the inside of the appliance is accessible.
Child safety
• This appliance is not intended for use by person (including children) with reduced physical sensory or
mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach
• Keep all detergents in a safe place out of children’s
reach.
• Make sure that children or pets do not climb into the
drum. To prevent children and pets becoming trapped
inside the drum this machine incorporates a special
feature.
To activate this device, rotate the button (without
pressing it) inside the
door clockwise until the
groove is horizontal. If
necessary use a coin.
To disable this device and
restore the possibility of
closing the door, rotate the
button anti-clockwise until
the groove is vertical.
3
Product description
1
2
3
4
5
6
Detergent dispenser drawer
Control panel
Door opening handle
Rating plate
Drain pump
Adjustable feet
1
2
3
4
5
6
Detergent dispenser drawer
Compartment for detergent used for prewash and soak
phase or for stain remover used during the stain action
phase (if available). The prewash and soak detergent is
added at the beginning of the wash programme. The stain
remover is added during the stain action phase.
Compartment for powder or liquid detergent used for
main wash. If using liquid detergent pour it just before
starting the programme.
Compartment for liquid additives (fabric softener,
starch).
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in the
detergent dispenser drawer. Any fabric softener or starching additives must be poured into the compartment before
starting the wash programme.
4
Control panel
On the following page there is a picture of the control panel. It shows the programme selector dial as well as the
buttons, pilot lights and the display. These are presented by relevant numbers on the following pages.
10
9
1
1
2
3
4
5
2
Programme selector dial
Spin button
Autodry button
Drying time button
Super quick button
3
4
6
7
8
9
10
5
6
7
8
Extra rinse button
Start/Pause button
Delay start button
Door pilot light
Display
Table of symbols
= Rinse hold
1-8 Programme selector dial, spin speed button,
drying level and time, and available options
Programme Selector Dial
It allows you to switch the appliance on/off and/or to select a programme.
Spin
By pressing this button you can change the spin speed of
the selected programme or to select Rinse Hold option.
Rinse hold
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing. Before
opening the door it will be necessary to empty out the water. To empty out the water, please read the paragraph «At
the end of the programme».
= Child Safety Lock
Automatic Dry
By pressing this button you can choose the required degree of drying for cottons and synthetics:
• Cupboard dry (Cottons and Synthetics)
• Iron dry (Cottons)
The pilot light corresponding to the selected dryness degree will illuminate.
Drying Time
If you wish to carry out a timed drying programme, press
this button until the drying time you want appears on the
display according to the fabrics (cottons or synthetics)
you have to dry. For Cottons you can select a drying time
from 10 minutes to 250 minutes (4.10). For Synthetics
you can select a drying time from 10 minutes to 130 minutes (2.10). Every time you press this button the drying
time increases by 5 mins.
5
Available options:
Super Quick
Short cycle for lightly soiled items or for laundry which
needs only freshening up. We recommend you to reduce
the fabrics loading.
Extra Rinse
This appliance is designed to save energy. If it necessary
to rinse the laundry using an extra quantity of water (extra
rinse), select this option. Some additional rinses will be
performed. This option is recommended for people who
are allergic to detergents, and in areas where the water is
very soft.
Start Pause
This button allows you to start or to interrupt the selected
programme.
Delay Start
The programme can be delayed from 30 min - 60 min - 90
min, 2 hours and then by 1 hour up to a maximum of 20
hours by means of this button.
Door light
The pilot light 9 illuminates when the programme starts
and indicates if the door can be opened:
• light on: the door cannot be opened. The machine is
working or has stopped with water left in the tub.
• light off: the door can be opened. The programme is
finished or the water has been emptied out.
• light blinking: the door is opening in a few minutes.
10 Display
10.1
6
10.2
The display shows the following information:
10.1: Child safety lock
This device permits you to leave the appliance unattended
during it's functioning.
10.2:
• Duration of the selected programme
After selecting a programme, the duration is displayed
). The durain hours and minutes (for example
tion is calculated automatically on the basis of the
maximum recommended load for each type of fabric.
After the programme has started, the time remaining is
updated every minute.
• Selected drying time
After selecting a drying programme the drying time is
shown in minutes or hours and minutes. After the programme has started, the time remaining is updated every minute.
• Delayed start
The Selected delay set by pressing the relevant button
appears on the display for a few seconds, then the duration of the selected programme is displayed again.
The delay time value decreases by one unit every hour
and then, when 1 hour remains, every minute.
• Alarm codes
In the event of operating problems, some alarm codes
(see paragraph
can be displayed, for example
«What to do if...»).
• Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed at
the bottom of the display for a few seconds and the integrated red light of button 7 start flashing.
• End of programme
When the programme has finished the flashing zero (
) is displayed, the pilot light 9 and the pilot light of
button 7 go out and the door can be opened.
Washing Programmes
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load Type of Laundry
Options
Cottons
90° - 60°
Main wash - Rinses
Maximum spin speed at 1200 rpm (ZKG 7125), 1400 rpm (ZKG
7145), 1600 rpm (ZKG 7165)
Max. load 6 kg - Reduced load 3 kg1)
White cotton(heavily and normally soiled items).
SPIN
RINSE HOLD
SUPER QUICK
EXTRA RINSE
Cottons Eco
60° - 40°
Main wash - Rinses
Maximum spin speed at 1200 rpm (ZKG 7125), 1400 rpm (ZKG
7145), 1600 rpm (ZKG 7165)
Max. load 6 kg
White or fast colour cotton (normally soiled items).
This programme can be selected for normally soiled cotton
items. The temperature will decrease and the washing time will
be extended. This allows to obtain a good washing efficiency by
saving energy.
SPIN
RINSE HOLD
EXTRA RINSE
Cottons
60° - 30°
Main wash - Rinses
Maximum spin speed at 1200 rpm (ZKG 7125), 1400 rpm (ZKG
7145), 1600 rpm (ZKG 7165)
Max. load 6 kg - Reduced load 3 kg1)
White or colour cotton (normally or slightly soiled items) .
SPIN
RINSE HOLD
SUPER QUICK
EXTRA RINSE
Cottons + Prewash
60° - 40°
Prewash - Main wash - Rinses
Maximum spin speed at 1200 rpm (ZKG 7125), 1400 rpm (ZKG
7145), 1600 rpm (ZKG 7165)
Max. load 6 kg - Reduced load 3 kg1)
White or colour cotton (heavily or normally soiled items)
SPIN
RINSE HOLD
SUPER QUICK
EXTRA RINSE
Synthetics
60° - 30°
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 3 kg - Reduced load 2 kg1)
Synthetic or mixed fabrics: underwear, coloured garments, nonshrink shirts, blouses.
SPIN
RINSE HOLD
SUPER QUICK
EXTRA RINSE
Detergent Compartment
2)
7
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load Type of Laundry
Options
Easy iron
40°
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 1 kg
Synthetic or mixed fabrics: selecting this programme the laundry is gently washed and spun to avoid any creasing. In this way
ironing is easier. Furthermore the machine will perform additional rinses.
SPIN
RINSE HOLD
EXTRA RINSE
Delicates
40° - 30°
Main wash - Rinses
Maximum spin speed at 700 rpm
Max. load kg 3 - Reduced load kg 1,51)
Delicate fabrics: acrylics, viscose, polyester.
SPIN3)
RINSE HOLD
SUPER QUICK
EXTRA RINSE
Wool / Handwash
40° - Cold
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 2 kg
Washing programme for machine washable wool as well as for
hand washable woollens and delicate fabrics. Note! A single or
bulky item may cause imbalance. If the appliance doesn’t perform the final spin phase, add more items, redistribute the load
manually and then select the spinning programme.
SPIN
RINSE HOLD
Jeans
40°
Main wash - Rinses
Maximum spin speed at 1200 rpm
Max. load 3 kg
With this programme it is possible to wash items like pants,
shirts or jackets in denim tissue and also jersey realized with hitech materials. Note! The Extra Rinse option will be activated automatically.
SPIN
RINSE HOLD
Sport Intensive
40°
Prewash - Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 2,5 kg
This programme is suitable for washing heavily soiled sport
items. The appliance will add automatically a prewash phase before the main wash to eliminate mud stains.
SPIN
RINSE HOLD
8
Detergent Compartment
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load Type of Laundry
Rinses
Maximum spin speed at 1200 rpm (ZKG 7125), 1400 rpm (ZKG
7145), 1600 rpm (ZKG 7165)
Max. load 6 kg
With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine performs
3 rinses, followed by a final long spin.
Options
Detergent Compartment
SPIN
RINSE HOLD
EXTRA RINSE
Important!
The spin speed will automatically assume the setting for cotton
items. if required, reduce the speed to the desired level by
pressing the button 2.
Drain
Draining of water
Max. load 6 kg
For emptying out the water of the last rinse in programmes
which stop with water in the tub.
Spin
Drain and long spin
Maximum spin speed at 1200 rpm (ZKG 7125), 1400 rpm (ZKG
7145), 1600 rpm (ZKG 7165)
Max. load 6 kg
Separate spin for hand washed garments and after programmes
which stop with water in the tub. You can reduce the spin speed
to the required level by pressing the relevant button to adapt it
to the fabrics to be spun.
SPIN
O/Off
For cancelling the programme which is running or to switch the
machine off .
1) If you select the Super Quick option by pressing button 5, we recommend that you reduce the maximum load as indicated. Full
loading is possible however with somewhat reduced cleaning results.
2) If using liquid detergents, a programme without PREWASH must be selected.
3) Available only with model ZKG 7125.
Automatic Drying programmes
Degree of Drying
Type of Fabric
Max Load
Cupboard dry
Suitable for items to put away without ironing
Cotton and linen (bathrobes, bath
towels, etc)
3 kg
Cupboard dry
Suitable for items to put away without ironing
Synthetics and mixed fabrics
(jumpers, blouses, underwear,
household linen)
2 kg
9
Degree of Drying
Iron dry
Suitable for ironing
Type of Fabric
Max Load
Cotton and linen (sheets, tablecloths, shirts, etc.)
3 kg
Drying Programmes
Degree of Drying
Suitable for items to put away without ironing
Suitable for items to put away without ironing
Suitable for ironing
them.
Type of Fabric
Max Load
Cotton and linen (bathrobes, bath towels, etc)
Synthetics and mixed
fabrics
Cotton and linen
(sheets, tablecloths,
shirts, etc.)
4 kg
3 kg
1,5 kg
2 kg
1 kg
4 kg
3 kg
1,5 kg
Spin Speed
Suggested drying time in
Mins
1600
130-150
75-85
35-45
1400
140-160
80-90
40-50
1200
150-170
85-95
45-65
900
70-80
35-45
1600
100-120
65-75
30-40
1400
110-130
65-75
35-45
1200
120-140
70-80
40-50
In compliance with EC directive EN 50229 the cotton reference programme for the data entered in the Energy Label
must be tested dividing the maximum washing load by two equal parts and drying with DRYING TIME each of
Helpful hints and tips
Sorting out the laundry
Before loading the laundry
Follow the wash code symbols on each garment label and
the manufacturer’s washing instructions. Sort the laundry
as follows: whites, coloureds, synthetics, delicates, woollens.
Never wash whites and coloureds together. Whites may
lose their «whiteness» in the wash.
New coloured items may run in the first wash; they should
therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and
poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
10
Rub particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie them
up in a bag or net.
Removing stains
Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to
washing.
Blood: treat fresh stains with cold water. For dried stains,
soak overnight in water with a special detergent then rub
in the soap and water.
Oil based paint: moisten with benzine stain remover, lay
the garment on a soft cloth and dab the stain; treat several
times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips
and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust removing
product used cold. Be careful with rust stains which are
not recent since the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and fast
coloureds only).
Grass: soap lightly and treat with bleach (whites and fast
coloureds only).
Ball point pen and glue: moisten with acetone1), lay the
garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains
with methylated spirits. Treat any residual marks with
bleach.
Red wine: soak in water and detergent, rinse and treat with
acetic or citric acid, then rinse. Treat any residual marks
with bleach.
Ink: depending on the type of ink, moisten the fabric first
with acetone1), then with acetic acid; treat any residual
marks on white fabrics with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, methylated spirits
or benzine, then rub with detergent paste.
Detergents and additives
Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and
protect the environment.
Although biodegradable, detergents contain substances
which, in large quantities, can upset the delicate balance
of nature.
The choice of detergent will depend on the type of fabric
(delicates, woollens, cottons, etc.), the colour, washing
temperature and degree of soiling.
All commonly available washing machine detergents may
be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics (60°C max) and
woollens
• liquid detergents, preferably for low temperature wash
programmes (60°C max) for all types of fabric, or special for woollens only.
The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before
starting the wash programme.
If using liquid detergents, a programme without prewash
must be selected.
Your appliance incorporates a recirculation system which
allows an optimal use of the concentrated detergent.
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in
the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend on the type
of fabric, load size, degree of soiling and hardness of the
water used.
Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during washing.
Degrees of water hardness
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in your
area can be obtained from the relevant water supply company, or from your local authority. If the water hardness
degree is medium or high we suggest you to add a water
softener following always the manufacturer’s instructions.
When the degree of hardness is soft, readjust the quantity
of the detergent.
1) do not use acetone on artificial silk
11
Drying Hints
Preparing the drying cycle
As a dryer, the appliance works on the condensation principle.
Therefore, the water tap must be open and the drain hose
must drain water into a sink or into the drain pipe, even
during the drying cycle.
Attention!
Before starting the drying programme, reduce the loads of
washed laundry, in order to obtain good performances.
Laundry not suitable for drying
• Particularly delicate items such as synthetic curtains,
woollen and silk, garments with metal inserts, nylon
stockings, bulky garments such as anoraks, bed covers, quilts, sleeping bags and duvets must not be machine dried.
• Avoid drying dark clothes with light coloured fluffy
items such as towels as these can attract the fluff.
• Remove the laundry when the appliance has finished
drying.
• To avoid a static charge when drying is completed, use
either a fabric softener when you are washing the laundry or a fabric conditioner specifically for tumble dryers.
• Garments padded with foam-rubber or materials similar to foam-rubber must not be machine dried; they
represent a fire hazard.
• Also, fabrics containing residue of setting lotions or
hair sprays, nail solvents or similar solutions must not
be machine dried in order to avoid the formation of
harmful vapours.
The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before
starting the wash programme.
If using liquid detergents, a programme without prewash
must be selected.
Your appliance incorporates a re-circulation system which
allows an optimal use of the concentrated detergent.
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in
the detergent dispenser drawer.
Garment labels
For drying, follow the indications given on the manufacturer’s labels:
•
= May be tumble dried
•
= Drying at high temperature
•
= Drying at reduced temperature
•
= Do not tumble dry.
Drying cycle duration
The drying time may vary depending on:
• speed of the final spin
• dryness degree required (iron dry, store dry)
• type of laundry
• weight of the load size .
The average drying time for a timed drying are indicated in
the «Drying programmes» chapter. The experience will
help you to dry your laundry in a more suitable way, according to the different fabrics. Take note of the duration
drying time of the already performed cycles.
Additional drying
If the laundry is still damp at the end of the drying programme, select a short drying cycle again.
Warning! Do not over dry the laundry in order to
avoid creasing of fabrics or garment’s shrinking.
First use
• Ensure that the electrical and water connections
comply with the installation instructions.
• Remove the polystyrene block and any material
from the drum.
• Before the first wash, run a cotton cycle at the
highest temperature without any laundry in the
12
machine, to remove any manufacturing residue
from the drum and tub. Pour 1/2 a measure of
detergent into the main wash compartment and
start the machine.
Personalisation
Acoustic signals
The machine is provided with an acoustic device, which
sounds in the following cases:
• at the end of the cycle
• if there is a fault.
By pressing the 3 and 4 buttons simultaneously for about
6 seconds, the acoustic signal is deactivated (except if
there is a fault). By pressing these 2 buttons again, the
acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unattended
so you do not need to worry that children might be injured
by or cause damage to the appliance. This function remains enabled also when the washing machine is not
working.
There are two different ways to set this option:
1. Before pressing button 7: it will be impossible to
start the machine.
2. After pressing button 7: it will be impossible to
change any other programme or option.
To enable or disable this option press simultaneously for
about 6 seconds buttons 2 and 3 until on the display, the
appears or disappears.
icon
Daily Use
Load the laundry
Open the door by carefully
pulling the door handle
outwards. Place the laundry in the drum, one item
at a time, shaking them
out as much as possible.
Close the door.
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage
to the laundry.
Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required, pour it into the
or in the appropriate commain wash compartment
partment if the selected programme/option it requires
(see more details in "Detergent dispenser drawer").
If required, pour fabric softener into the compartment
(the amount used must not exceed the
marked
«MAX» mark in the drawer). Close the drawer gently.
Select the required programme by means of the
programme selector dial (1)
Turn the programme selector dial to the required programme.
The green pilot light of button 7 starts to flash. The selector dial can be turned either clockwise or anticlockwise.
to reset the proTurn the selector dial to position
gramme/to switch the machine OFF.
At the end of the programme the selector dial must be
, to switch the machine off.
turned to position
Important! If you turn the programme selector dial to
another programme when the machine is working, the red
pilot light of button 7 will blink 3 times and the
messageErr is displayed to indicate a wrong selection.
The machine will not perform the new selected
programme.
Select the spin speed by pressing button 2
When selecting a programme, the appliance proposes automatically the maximum spin speed provided for that
13
programme. (See "Washing programmes" for the maximum allowed spin speed).
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a different speed. The
relevant pilot light illuminates.
Select the available options by pressing the buttons
5 and 6
Depending on the programme, different options can be
combined. These must be selected after choosing the desired programme and before starting the programme.
When these buttons are pressed, the corresponding pilot
lights illuminate. When they are pressed again, the pilot
lights go out. If an incorrect option is selected, the integrated red pilot light of the button 7 flashes 3 times and
the message Err is displayed.
For the compatibility among the washing programmes and
the options see chapter «Washing programmes».
Start the programme by pressing button 7
To start the selected programme, press this button; the
corresponding green pilot light stops blinking.
The pilot light 9 illuminates to indicate that the appliance
starts operating and the door is locked.
If you have chosen a delayed start, the machine will begin
the countdown.
Important! If an incorrect option is selected, the message
Err is displayed for a few seconds and the red pilot light of
this button blinks 3 times.
Select the Delay Start by pressing button 8
Before you start the programme, if you wish to delay the
start, press this button to select the desired delay.
The selected delay time value will appear on the display
for a few seconds, then the duration of the programme will
appear again.
You must select this option after you have set the programme and before you start the programme.
You can cancel or modify the delay time at any moment,
before you press button 7.
Selecting the delay start :
1. Select the programme and the required options.
2. Select the delay start by pressing button 8.
3. Press button 7:
- the machine starts its hourly countdown.
- the programme will start after the selected delay
has expired.
Cancelling the Delay Start after having started the programme:
14
1.
Set the washing machine to PAUSE by pressing button 7.
2.
Press button 8 once. On the display will appear
Press button 7 again to start the programme.
3.
'.
Important!
• The selected delay can be changed only after selecting
the washing programme again.
• The door will be locked throughout the delay time. If
you need to open the door, you must first set the washing machine to PAUSE by pressing button 7 and wait a
few minutes before opening the door. After you have
closed the door, press the same button again.
Important! The Delay Start cannot be selected with the
draining programme.
Altering an option or a running programme
It is possible to change some options before the programme carries them out.
Before you make any change, you must pause the washing
machine by pressing button 7.
Changing a running programme is possible only by resetand then
ting it. Turn the programme selector dial to
to the new programme position. Start the new programme
by pressing button 7 again.
The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 7 to interrupt a programme which is running, the corresponding pilot light starts blinking. Press
the button again to restart the programme.
Cancelling a programme
Turn the selector dial to
to cancel a programme which
is running. Now you can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button 7.
If the pilot light 9 goes off, the door can be opened.
If the pilot light 9 remains lit, this means that the machine
is already heating or that the water level is too high. In any
case, do not force the door!
If you cannot open the door but you need to open it,
.
switch the machine off by turning the selector dial to
After a few minutes the door can be opened.
(Pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme and options again and to press button 7.
At the end of the programme
The machine stops automatically. The blinking appears
on the display, the pilot light of button 7 and the pilot light
9 go off.
If a programme or an option that ends with water left in the
tub has been selected, the pilot light 9 remains on and the
door is locked to indicate that the water must be emptied
out before opening the door.
Before you empty out the water, the drum continues to run
at regular intervals until the water draining.
Follow the below instructions to empty out the water:
1. Turn the programme selector dial to
.
2.
3.
Select the draining or spinning programme.
Reduce the spin speed if needed, by pressing the
relevant button.
4. Press button 7.
At the end of the programme, the door is released and can
to
be opened. Turn the programme selector dial to
switch the machine off.
Remove the laundry from the drum and carefully check
that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open to
prevent the formation of mildew and unpleasant smells.
Use - Drying
Drying only
The recommended load size is 3 kg for cottons and linen,
and 2 kg for synthetic items.
Note! By pressing Drying Time button it is also possible
to dry up to 4 kg of cotton items (see the «Drying Programme» table).
The water tap must be open and the drain hose must be
positioned in the sink or connected to the drain pipe.
1. Load the laundry.
2. Select a spin cycle at the maximum spin speed allowed for the type of laundry in order to obtain the
best drying performances.
3. Select the drying programme for Cottons or Synthetic in the Drying sector of the programme selector dial.
4. If you wish to select an electronic drying, press the
button 3 until the pilot light corresponding to the required dryness degree illuminates.
5. If you wish to select a timed drying, press button 4
until the time you want appears on the display (see
the «Drying Programmes» table). Every time you
press this button the drying time increases by 5 minutes.
Note!
The programme time will automatically increase by a
few minutes.
6. Press button 7 to start the programme.
After the programme has started, the time remaining
is updated every minute.
Note!
7.
8.
9.
The different type of cottons (towelling, sheets,
shirts, and so on) or any laundry items rolling up
during the spinning phase may result in partial dryness. In the exceptional case that at the end of the
cycle the laundry remains slightly wet, we suggest
that you unfold the rolled up items, redistribute them
evenly in the drum and select an additional drying
cycle of 20-30 minutes.
At the end of the programme, the buzzer sounds and
a blinking « » appear on the display.
The last 10 minutes of the drying cycle correspond
to an anti-crease phase. During this time the door is
locked and the display keeps showing the flashing
zero « ».
Note!
If you wish to open the door before or during the anti-crease phase or to interrupt it, press any button or
turn the programme selector dial to any programme
), the door can be opened after a
position (except
few minutes.
Turn the selector dial to the
the machine off.
Remove the laundry.
position to switch
Automatic washing and drying (NON-STOP programme)
For NON-STOP programmes, the recommended load size
is 3 kg for cotton and 2 kg for synthetic.
Note! It is possible to dry up to 4 kg of cotton items by
pressing Drying Time button only (see the «Drying Programme» table).
Do not use a dosing device/ball when carrying out a
washing and drying programme.
15
1.
2.
3.
4.
5.
Load the laundry.
Add detergent and fabric softener.
Switch the machine on by turning the selector dial to
the selected washing programme/fabric.
Select the required options by pressing the relevant
buttons.
Note!
If possible, do not select a spin speed lower than
that proposed by the appliance to avoid too long a
drying time therefore saving energy.
In any case the reduction of the spin speed is only
possible after selecting drying.
Select the drying time by pressing the button 4 or
dryness degree by pressing the button 3. The display
shows the entire duration of the washing and the selected drying cycle.
Fluff in the garments
During the WASHING AND/OR DRYING PHASE, certain
types of fabric, as sponge-cloth, sweatshirt, could release
fluff.
The released fluff could stick to the fabrics during the next
cycle.
This drawback increases with technical fabrics.
To prevent the lint in your clothes, it is recommended:
• To do not wash dark fabrics after you washed and dried
light colored fabrics (new sponge, sweatshirt especially) and vice versa.
6.
7.
8.
9.
Start the programme by pressing button 7. After the
programme has started, the time remaining is updated every minute.
At the end of the programme the buzzer sounds. A
flashing zero « » appear on the display. At this
point of the programme, starts an anti-crease phase
which lasts about 10 minutes. During this time the
door is locked and the display keeps showing the
flashing zero « ». (If you wish to open the door
before or during the anti-crease phase, please follow
the instructions given in the previous chapter).
Turn the selector dial to the
the machine off.
Remove the laundry.
position to switch
• To air-dry this type of fabrics when they are washed the
first time.
• To clean the filter.
• Perform one or more rinse cycles to wash the drum between the washing and drying of fabrics with different
colors.
• After the drying phase, thoroughly clean the empty
drum, the gasket and the door with a wet rag.
Care and cleaning
Warning! You must DISCONNECT the appliance
from the electricity supply, before you can carry out
any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea
to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and
according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
16
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by
pressing the catch downwards and by pulling it
out. Flush it out under a
tap, to remove any traces
of accumulated powder.
To aid cleaning, the top
part of the additive compartment should be removed.
Open the pump door.
Put a container below the recess of the drain pump to
collect the water that flows out.
Cleaning the drawer recess
Having removed the drawer, use a small brush to
clean the recess, ensuring
that all washing powder
residue is removed from
the upper and lower part of
the recess.
Press the two levers and pull forward the drainage duct
to let the water flow out.
Replace the drawer and run the rinse programme without any clothes in the drum.
Cleaning the pump
The pump should be inspected regularly and particularly
if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump;
• a problem with water draining is detected (see chapter
“What to do if...” for more details).
1.
2.
Warning!
Disconnect the mains plug from the mains socket.
Do not remove the filter while the appliance operates. Do not clean the drain pump if the water in the
appliance is hot. The water must be cold before you
clean the drain pump.
When the container is full of water, put the drainage
duct back again and empty the container. Do steps 3
and 4 again and again until no more water flows out
from the drain pump.
1
2
Pull back the drainage duct.
Unscrew the filter and remove it.
Proceed as follows:
17
empty. When refitting the pump cover, ensure it is
securely re-tightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filters
Remove fluff and objects from the pump.
Important! If the appliance doesn't fill, takes long to fill
with water, the starting button blinks yellow or the display
(if available) shows the relevant alarm (see chapter "What
to do if..." for more details), check if the water inlet filters
are blocked .
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose from
the tap.
• Clean the filter in the
hose with a stiff brush.
Make sure that the impeller of the pump can turn. If this
does not occur, contact the service centre.
1
• Screw the hose back onto the tap. Make sure the
connection is tight.
2
Clean the filter under the water tap and put it back in the
pump into the special guides.
Make sure that you tighten correctly the filter to prevent
leakages.
• Unscrew the hose from the machine. Keep a rag
nearby because some water may flow.
• Clean the filter in the valve with a stiff brush or with
the piece of cloth.
35°
45°
Close the pump door.
Caution! When the appliance is in use and
depending on the programme selected there can be
hot water in the pump.
Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is
18
• Screw the hose back to the machine and make sure
the connection is tight.
• Turn on the water tap.
Frost precautions
If the machine is installed in a place where the temperature could drop below 0°C, remove the remaining water
from the inlet hose and the drain pump.
1. disconnect the mains plug from the mains socket.
2. close the water tap
3. unscrew the water inlet hose from the tap;
4. put the two ends of the inlet hose in a container and
let the water flow out of the hose.
5. empty the drain pump as described in the ‘Emergency emptying out’ section.
6. when the drain pump is empty, install the water inlet
hose again.
Warning!
Make sure that the temperature is more than 0 °C before
you use the appliance again.
The manufacturer is not responsible for damages caused
by low temperatures.
Emergency emptying out
1.
2.
3.
4.
5.
pull out the plug from the power socket;
close the water tap;
if necessary, wait until the water has cooled down;
open the pump door;
place a container on the floor below the recess of the
drain pump;
6. press the two levers and pull forward the drainage
duct to let the water flow out;
7. when the container is full of water, put the drainage
duct back again and empty the container;
repeat this operation until water stops flowing out;
8. if necessary clean the pump (refer to the section
‘Cleaning the pump’ );
9. close the drain pump door.
When you drain the water with the emergency drain procedure, you must activate again the drain system:
1. Put 2 litres of water in the main wash compartment
of the detergent dispenser.
2. Start the programme to drain the water.
If the appliance cannot drain the water, proceed as follows
to empty out the machine:
What to do if…
Certain problems are due to lack of simple maintenance or
oversights, which can be solved easily without calling out
an engineer. Before contacting your local Service Centre,
please carry out the checks listed below.
During machine operation it is possible that the red pilot
light of button 7 blinks, one of the following alarm codes
appears on the display and some acoustic signals sound
every 20 seconds to indicate that the machine is not working:
•
•
: problem with the water supply.
: problem with the water draining.
•
: door open.
Once the problem has been eliminated, press the button 7
to restart the programme. If after all checks, the problem
persists, contact your local Service Centre.
19
Problem
Possible cause/Solution
The door has not been closed.
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
The washing machine does not start: • Replace the fuse.
The selector dial is not correctly positioned and/or the button 7 has not been
pressed.
• Please turn the selector dial and press the button 7 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The Child Safety Lock has been activated.
• Deactivate the Child Safety Lock.
The machine does not fill:
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or in the inlet valve filter are blocked.
• Clean the water inlet filters (see ‘Cleaning the water inlet filters’ for more
details).
The door is not properly closed.
• Close the door firmly.
The machine fills then empties immediately:
The end of the drain hose is too low.
• Refer to relevant paragraph in «Water drainage» section.
The machine does not empty and/or
does not spin:
The drain hose is squashed or kinked.
• Check the drain hose connection.
The drain filter is clogged.
• Clean the drain filter.
An option or a programme that ends with the water still in the tub or that eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
20
Problem
Possible cause/Solution
There is water on the floor:
Too much detergent or unsuitable detergent (creates too much foam) has been
used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if it is
damp.
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Replace it with a new one.
The filter has not been properly screwed in after cleaning action.
• Screw the filter fully in.
Unsatisfactory washing results:
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the door is released.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The machine vibrates is noisy:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
21
Problem
Possible cause/Solution
Spinning starts late or the machine
does not spin:
The electronic unbalance detection device has cut in because the laundry is
not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still
not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and select the spin programme.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually and then select the spinning
programme.
The machine makes an unusual
noise:
The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and
more even distribution of the laundry in the drum when spinning, as well as
increased stability of the machine.
No water is visible in the drum:
Machines based on modern technology operate very economically using very
little water without affecting performance.
The machine does not dry or does
not dry properly:
The drying time or the dryness degree has not been selected.
• Select the drying time or the dryness degree.
The water tap is not turned on.
• Open the water tap.
The drain filter is clogged.
• Clean the drain filter.
The machine is overloaded.
• Reduce the laundry load in the drum.
The selected drying programme, time or dryness degree was not suitable for
the laundry.
• Select the suitable drying programme, time or dryness degree for the laundry.
The laundry is full of different colored fluff:
The fabrics washed in the previous cycle released fluff of a different color (refer
to “Fluff in the garments” in chapter “Use - Washing & Drying”).
• The drying phase helps to eliminate some fluff.
• Clean the clothes with a fluff remover.
In case of an excessive amount of fluff in the drum repeat the following procedure twice:
• Thoroughly clean the empty drum, the gasket and the door with a wet rag.
• Perform a rinse cycle.
• Put a wool or piled fabric rag inside the drum.
• Perform a drying cycle of 10 minutes.
• Remove the old wool cloth.
Now you can wash other garments.
22
If you are unable to identify or solve the problem, contact
our service centre. Before telephoning, make a note of the
model, serial number and purchase date of your machine:
the Service Centre will require this information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
Technical data
Dimensions
Width
Height
Depth
60 cm
85 cm
63 cm
Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Water Supply Pressure
Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load
Cotton
6 kg
Maximum Dry Load
Cotton
Cotton Big Capacity
Synthetic
3 Kg
4 Kg
2 Kg
Spin Speed
Maximum
1600 rpm (ZKG 7165)
1400 rpm (ZKG 7145)
1200 rpm (ZKG 7125)
Consumption values
Programme
Energy consumption
(KWh)
Water consumption (litres)
White Cottons 90°
2.00
61
Cottons 60°
1.30
58
Cotton Energy Saving Programme 60° 1)
1.02
46
Cottons 40°
0.70
58
Synthetics 40°
0.50
50
Delicates 40°
0.55
60
Wool/ Handwash 30°
0.25
53
Programme duration (Minutes)
For the duration of the programmes, please refer to
the display on the control
panel.
1) «Cotton Energy Saving programme » at 60°C with a load of 6 kg is the reference programme for the data entered in the energy label,
in compliance with EEC 92/75 standards.
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the
quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
23
Installation
Unpacking
Positioning
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can
be refitted if the machine ever has to be transported again.
Install the machine on a flat hard floor. Make sure that air
circulation around the machine is not impeded by carpets,
rugs etc. Check that the machine does not touch the wall
or other kitchen units. Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as
they incorporate a self locking nut, but the machine MUST
be level and stable.
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and displacement of the machine during operation. Never place cardboard, wood or similar materials under the machine to
compensate for any unevenness in the floor.
After removing all the
packaging, carefully lay
machine on it's back to remove the polystyrene base
from the bottom.
Remove the power supply
cable and the hoses from
the hose holders on the
rear of the appliance.
If necessary, check the
setting with a spirit level.
Installation on suspended flooring
Unscrew the three bolts.
Slide out the relevant plastic spacers.
Suspended wooden floors are particularly susceptible to
vibration.
To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws, the
wood panel must extend beyond the front feet.
If possible install the appliance in one of the corners of
the room, where the floor is more stable.
Rubber feet kit (4055126249)
Open the porthole and remove the polystyrene
block fitted on the door
seal.
24
Fill the smaller upper hole
and the two large ones
with the corresponding
plastic plug caps supplied
in the bag containing the
instruction booklet.
Available from your authorized dealer.
The rubber feet are particularly recommended on floating,
slippery and wooden floors.
Mount the rubber feet to prevent vibration, noises and displacement of the appliance during operation.
Read carefully the instructions supplied with the kit.
Water inlet
Warning! This appliance must be connected to a
cold water supply
Caution! Before connecting up the appliance to new
pipework or to pipework that has not been used for
some time, run off a reasonable amount of water to flush
out any debris that may have collected
Caution! Do not use the hose from your previous
appliance to connect to water supply.
The inlet hose is screwed to the back of the appliance.
Connect the hose to a tap
with a 3/4” thread. Always
use the hose supplied with
the appliance.
There should be a minimum vertical distance of 5.02 m
(16.5 ft) between the appliance’s inlet and the bottom of
the water storage tank.
Water drainage
This appliance is designed to be permanently plumbed into your home's drainage system using one of the following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
“U” piece supplied
35°
45°
The other end of the inlet hose which connects to the
appliance can be turned as showed in the picture.
Do not place the inlet hose downwards. Angle the hose
to the left or right depending on the position of your
water tap. Set the hose correctly by loosening the ring
nut. After positioning the inlet hose, be sure to tighten
the ring nut again to prevent leaks.
Caution! The inlet hose must not be lengthened. If it
is too short and you do not wish to move the tap,
you will have to purchase a new, longer hose specially
designed for this type of use.
Warning! Installation should comply with local
water authority and building regulations’
requirements.
The appliance must be connected to a cold water supply.
A minimum water pressure of 0.05 MPa (0.5 bar) is
required for safe operation of the appliance.
If you cannot make the cold water connection direct from
the rising mains, you may be able to operate the appliance
from your cold water storage system.
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38 mm thus
ensuring there is an air break between the drain hose
and standpipe.
When discharging into a standpipe ensure that the top
of the standpipe is no more than 90 cm (35.4'') and no
less than 60 cm (23.6'') above floor level.
38 mm (1.5”)
standpipe
diamater
30 cm (12”)
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre. The
joining piece must have an internal diameter of 18 mm.
25
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
In the interest of the environment
Min. 60 cm (23.6”)
Max. 90 cm (35.4”)
If your drain hose looks
like this (see beside) you
do not require the “U”
piece”. Just push the hose
firmly in to the standpipe.
The appliance should be connected to the FOUL drainage
system, the water will then be taken to a sewage works for
treatment before being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.
If you require any further advice please contact your local
water authority.
2. Onto a sink outlet spigot.
SHOWER
SINK TOILET
BATH
BIDET
WASHING
MACHINE
DISHWASHER
RAINWATER
‘RUN-OFF’
Loop
If the outlet spigot has not
been used before, remove
any blanking plug that
may be in place.
Push the drain hose onto
the spigot and secure with
a clip, ensure a loop is
formed in the drain hose
(see above) to prevent
waste from the sink entering the appliance.
If you intend to drain the hose from the machine into a
sink, make sure that the sink is empty and the plug hole
is not blocked. Use the plastic “U - Piece” supplied.
Special conditions
If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent
noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the appliance.
Note!
26
Warning! The appliance should NOT be placed on
deep pile carpeting.
SURFACE WATER
DRAINS & SEWERS
UNTREATED
DISCHARGE
RIVER
FOUL DRAIN
FOUL SEWERS
SEWAGE TREATMENT
WORKS
TREATED DISCHARGE
RIVER
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or competent person.
Warning! THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this
safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate.
Warning! Information on the electrical connection is
given on the rating plate on the inner edge of the
appliance door.
The appliance is supplied with a 13 amp plug fitted.
In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS1363/A) fuse must be
used.
MUST be carried out by our Service Force Centre. The
appliance should not be connected to the electrical supply
by means of an extension cable.
Warning! A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of safely. Should
the appliance power supply cable need to be replaced, this
Note!
When the appliance is installed the power supply cable
must be accessible.
Environmental concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
Packaging materials
The materials marked with the symbol
>PE<=polyethylene
>PS<=polystyrene
are recyclable.
>PP<=polypropylene
This means that they can be recycled by disposing of
them properly in appropriate collection containers.
Ecological hints
To save water, energy and to help protect the environment,
we recommend that you follow these tips:
• Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the
environment is protected too!).
• The machine works more economically if it is fully loaded.
• With adequate pre-treatment, stains and limited soiling
can be removed; the laundry can then be washed at a
lower temperature.
• Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry
being washed.
27
132937920-A-142011
www.zanussi.com/shop
Download PDF

advertising