ZANUSSI ZWS5108 User Manual

Add to My manuals
24 Pages

advertisement

ZANUSSI ZWS5108 User Manual | Manualzz
EN
User manual
Washing Machine
ZWS 5108
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _
Special accessories for installation _ _ _ _ _ _
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2
3
5
6
6
8
8
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _
10
11
14
17
17
20
22
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep
the instructions with the appliance for future reference.
Children and vulnerable people safety
Warning! Risk of suffocation, injury or permanent disability.
• Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction
for the operation of the appliance by a person who is responsible
for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door when it is
open.
• If the appliance has a child safety device, we recommend you activate it.
General Safety
• Before maintenance, deactivate the appliance and disconnect the
mains plug from the mains socket.
• Do not change the specification of this appliance.
2
www.zanussi.com
• Obey the maximum load volume of 6 kg (refer to the “Programme
chart” chapter).
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
• The operating water pressure (minimum and maximum) must be
between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa)
• The ventilation openings in the base (if applicable) must not be obstructed by a carpet.
• The appliance is to be connected to the water mains using the
new supplied hose-sets. Old hose sets must not be reused.
Safety instructions
Installation
• Remove all the packaging and the transit
bolts.
• Keep the transit bolts. When you move the
appliance again you must block the drum.
• Do not install or use a damaged appliance.
• Do not install or use the appliance where the
temperature is less than 0 °C or where it is
exposed to the weather.
• Obey the installation instruction supplied with
the appliance.
• Make sure that the floor where you install the
appliance is flat, stable, heat resistant and
clean.
• Do not install the appliance where the appliance door can not be fully opened.
• Always be careful when you move the appliance because it is heavy. Always wear safety
gloves.
• Make sure that there is air circulation between the appliance and the floor.
• Adjust the feet to have the necessary space
between the appliance and the carpet.
Electrical connection
Warning! Risk of fire and electrical shock.
• The appliance must be earthed.
www.zanussi.com
• Make sure that the electrical information on
the rating plate agrees with the power supply.
If not, contact an electrician.
• Always use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and extension
cables.
• Make sure not to cause damage to the mains
plug and to the mains cable. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Centre.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
• Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
• Do not touch the mains cable or the mains
plug with wet hands.
• Only for UK and Ireland. The appliance has a
13 amp mains plug. If it is necessary to
change the fuse in the mains plug, use a 13
amp ASTA (BS 1362) fuse.
•
This appliance complies with the E.E.C. Directives.
3
Water connection
• Make sure not to cause damage to the water
hoses.
• The appliance is to be connected to the water mains using the new supplied hose-sets.
Old hose sets must not be reused.
• Before you connect the appliance to new
pipes or pipes not used for a long time, let
the water flow until it is clean.
• The first time you use the appliance, make
sure that there is no leakage.
Use
Warning! Risk of injury, electrical shock,
fire, burns or damage to the appliance.
• Use this appliance in a household environment.
• Obey the safety instructions on the detergent
packaging.
• Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
• Do not touch the glass of the door while a
programme operates. The glass can be hot.
• Make sure that you remove all metal objects
from the laundry.
4
• Do not put a container to collect possible water leakage under the appliance. Contact the
Service to ensure which accessories can be
used.
Care and Cleaning
Warning! Risk of injury or damage to the
appliance.
• Do not use water spray and steam to clean
the appliance.
• Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.
Disposal
Warning! Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children
and pets to get closed in the appliance.
Service
• Contact the Service to repair the appliance.
We recommend only the use of original spare
parts.
www.zanussi.com
Product description
1 Detergent dispenser drawer
2 Control panel
1
2
3 Door opening handle
4 Rating plate
5 Drain pump
6 Adjustable feet
3
4
5
6
Detergent dispenser drawer
Compartment for detergent used for prewash
and soak phase or for stain remover used during
the stain action phase (if available). The prewash
and soak detergent is added at the beginning of
the wash programme. The stain remover is added during the stain action phase.
Compartment for powder or liquid detergent
used for main wash. If using liquid detergent
pour it just before starting the programme.
Compartment for liquid additives (fabric softener, starch).
Follow the product manufacturer’s recommendations on quantities to use and do not exceed the
«MAX» mark in the detergent dispenser drawer. Any fabric softener or starching additives must
be poured into the compartment before starting the wash programme.
Child Safety device
Make sure that children or pets do not climb into the drum. To prevent children and pets be-
www.zanussi.com
coming trapped inside the drum this machine incorporates a special feature.
5
To activate this device, rotate the button
(without pressing it)
inside the door clockwise until the groove
is horizontal. If necessary use a coin.
To disable this device and restore the
possibility of closing
the door, rotate the
button anti-clockwise
until the groove is vertical.
Special accessories for installation
Rubber feet kit (4055126249)
Available from your authorized dealer.
The rubber feet are particularly recommended
on floating, slippery and wooden floors.
Mount the rubber feet to prevent vibration,
noises and displacement of the appliance during operation.
Read carefully the instructions supplied with the
kit.
Fixing plate kit (4055171146)
Available from your authorized dealer.
If you install the appliance on a plinth, secure
the appliance in the fixing plates.
Follow the instructions supplied with the kit.
Control panel
Below is a picture of the control panel. It shows the programme selector dial as well as the
buttons, pilot lights and the display. These are presented by relevant numbers on the following
pages.
1
1 Programme selector dial
6
2
3
4
5
6
7
2 Temperature selector dial
www.zanussi.com
3 SPIN reduction button (Spin)
4 OPTIONS button (Options)
– Easy Iron (Easy Iron)
– Super Quick (Super Quick)
Table of symbols
5 EXTRA RINSE button (Extra Rinse)
6 START/PAUSE button (Start/Pause)
7 Indicator Pilot Light
Rinse Hold
Cold water
Programme and temperature selector dials, spin speed button
and available options
Programme Selector Dial
It allows you to switch the appliance on/off and/
or to select a programme.
Temperature selector dial
This dial allows you to select the temperature
more suitable to the laundry to be washed.
(Cold) the machine
By selecting the position
will wash with cold water.
Available options:
Spin Reduction
By pressing this button you can change the spin
speed of the selected programme.
Rinse hold
By selecting this function the water of the last
rinse is not emptied out to prevent the fabrics
from creasing. Before opening the door it will be
necessary to empty out the water. To empty out
the water, please read the paragraph «At the
end of the programme».
Easy Iron
By selecting this option the laundry is gently
washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine
will perform some additional rinses in some programmes. On cotton programmes the maximum
spin speed is reduced automatically.
Extra Rinse
This appliance is designed to save energy. If it
necessary to rinse the laundry using an extra
quantity of water (extra rinse), select this option.
Some additional rinses will be performed. This
option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
Start Pause
This button allows you to start or to interrupt the
selected programme.
Indicator pilot light (7)
A
B
C
The light 7.A illuminates after pressing
button 6.
The light 7.B is on
when the machine is
rinsing or spinning
phase.
The light 7.C illuminates at the end of
the washing cycle.
Super Quick
Short cycle for lightly soiled items or for laundry
which needs only freshening up. We recommend you to reduce the fabrics loading.
www.zanussi.com
7
First use
• Ensure that the electrical and water connections comply with the installation instructions.
• Remove the polystyrene block and any
material from the drum.
• Pour 2 litres of water into the main wash
of the detergent drawer
compartment
in order to activate the ECO valve. Then
run a cotton cycle at the highest temperature without any laundry in the machine,
to remove any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the main wash
compartment and start the machine.
Daily use
Load the laundry
Open the door by
carefully pulling the
door handle outwards. Place the
laundry in the drum,
one item at a time,
shaking them out as
much as possible.
Close the door.
Make sure that no
laundry stays between the seal and
the door. There is a
risk of water leakage
or damage to the
laundry.
Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it into the main wash compartor in the appropriate compartment if
ment
the selected programme/option it requires
(see more details in "Detergent dispenser
drawer").
If required, pour fabric softener into the com(the amount used must
partment marked
not exceed the «MAX» mark in the drawer).
Close the drawer gently.
Select the required programme by turning
the programme selector dial (1)
Turn the programme selector dial to the required programme. The washing machine will
automatically select the maximum spin value
provided for the programme you have chosen.
You can change this value by pressing the corresponding button. The green pilot light of the
button 6 starts to flash.
The selector dial can be turned either clockwise
to reor counterclockwise. Turn to position
set programme/Switching the machine off.
At the end of the programme the selector
, to
dial must be turned to position
switch the machine off.
Caution! If you turn the programme
selector dial to another programme when
the machine is working, the red pilot light of
button 6 will blink 3 times to indicate a wrong
selection. The machine will not perform the new
selected programme.
8
www.zanussi.com
Select the required temperature by
turning the temperature selector dial (2)
Turn clockwise this dial to select the more convenient to your laundry washing temperature.
Select the available options by pressing
buttons 3, 4 and 5
Depending on the programme, different functions can be combined. These must be selected
after choosing the desired programme and before starting the programme.
When these buttons are pressed, the corresponding pilot lights illuminate. When they are
pressed again, the pilot lights go out. If an incorrect option is selected, the integrated red pilot
light of the button 6 flashes for 3 times.
For the compatibility among the washing
programmes and the options see chapter
«Washing Programmes».
Start the programme by pressing button 6
To start the selected programme, press the button 6, the corresponding green pilot light stops
blinking. The appliance starts operating and the
only pilot light corresponding to the running
phase stays on.
To interrupt a programme which is running,
press the button 6: the corresponding green pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 6
again.
If an incorrect option is selected, the red pilot
light of the button 6 blinks 3 times.
Altering an option or a running
programme
It is possible to change some options before the
programme carries them out.
Before you make any change, you must PAUSE
the appliance by pressing the button 6.
Changing a running programme is possible only
by resetting it. Turn the programme selector dial
and then to the new programme position.
to
Start the new programme by pressing the button 6 again. The washing water in the tub will be
not emptied out.
Interrupting a programme
Press the button 6 to interrupt a programme
which is running, the corresponding green pilot
light starts blinking.
Press the button again to restart the programme.
Cancelling a programme
to cancel a proTurn the selector dial to
gramme which is running. Now you can select a
new programme.
Opening the door
After the programme has started the door is
locked. If, for any reason, you need to open it,
set firstly the machine to PAUSE by pressing
the button 6. After a few minutes it will be possible to open the door.
If the door remains locked, this means that the
machine is already heating or that the water level is too high. In any case, do not try to force the
door!
If you cannot open the door but you need to
open it you have to switch the machine off by
. After a few miturning the selector dial to
nutes the door can be opened (pay attention
to the water level and temperature!).
After closing the door, it is necessary to select
the programme and options again and to press
button 6.
At the end of the programme
The machine stops automatically. The pilot light
of button 6 and the pilot light corresponding to
the just finished washing phase go off. The light
7.C illuminates.
If a programme or an option that ends with water left in the tub has been selected, the light
7.C illuminates but the door remains locked to
indicate that the water must be emptied out before opening the door.
Follow the below instructions to empty out the
water:
1. Turn the programme selector dial to
.
2.
3.
4.
www.zanussi.com
Select the draining or spinning programme.
Reduce the spin speed if needed, by pressing the relevant button.
Press button 6.
9
At the end of the programme, the door can be
now opened. Turn the programme selector dial
to switch the machine off.
to
Remove the laundry from the drum and carefully
check that the drum is empty. If you do not in-
tend to carry out another wash, close the water
tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
Helpful hints and tips
Sorting out the laundry
Follow the wash code symbols on each garment
label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the wash.
New coloured items may run in the first wash;
they should therefore be washed separately the
first time.
Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks
or tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable to
treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a special detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and dab
the stain; treat several times.
Dried grease stains: moisten with turpentine,
lay the garment on a soft surface and dab the
stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with
rust stains which are not recent since the cellulose structure will already have been damaged
and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with acetone1), lay the garment on a soft cloth and dab
the stain.
Lipstick: moisten with acetone as above, then
treat stains with methylated spirits. Treat any residual marks with bleach.
Red wine: soak in water and detergent, rinse
and treat with acetic or citric acid, then rinse.
Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the
fabric first with acetone1), then with acetic acid;
treat any residual marks on white fabrics with
bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent
paste.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the environment.
Although biodegradable, detergents contain
substances which, in large quantities, can upset
the delicate balance of nature.
The choice of detergent will depend on the type
of fabric (delicates, woollens, cottons, etc.), the
colour, washing temperature and degree of soiling.
All commonly available washing machine detergents may be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics (60°C
max) and woollens
• liquid detergents, preferably for low temperature wash programmes (60°C max) for all
types of fabric, or special for woollens only.
1) do not use acetone on artificial silk
10
www.zanussi.com
The detergent and any additives must be placed
in the appropriate compartments of the dispenser drawer before starting the wash programme.
If using liquid detergents, a programme without
prewash must be selected.
Your appliance incorporates a recirculation system which allows an optimal use of the concentrated detergent.
Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend
on the type of fabric, load size, degree of soiling
and hardness of the water used.
Follow the product manufacturers’ instructions
on quantities to use.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during washing.
Degrees of water hardness
Water hardness is classified in so-called “degrees” of hardness. Information on hardness of
the water in your area can be obtained from the
relevant water supply company, or from your local authority. If the water hardness degree is
medium or high we suggest you to add a water
softener following always the manufacturer’s instructions. When the degree of hardness is soft,
readjust the quantity of the detergent.
Washing programmes
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Options
COTTONS NORMAL
(Cottons Normal)
90°-Cold
Main wash - Rinses
Maximum spin speed 1000 rpm
Max. load 6 kg - Reduced load 3 kg 1)
White and coloured cotton (normally soiled items).
SPIN, RINSE HOLD,
EASY IRON 2), SUPER
QUICK, EXTRA RINSE
COTTONS NORMALS + PREWASH
Cottons Normal + Prewash
90°-Cold
Prewash - Main wash - Rinses
Maximum spin speed 1000 rpm
Max. load 6 kg - Reduced load 3 kg 1)
White and coloured cotton (heavy soiled items).
SPIN, RINSE HOLD,
EASY IRON 2), SUPER
QUICK, EXTRA RINSE
www.zanussi.com
Detergent
Compartment
3)
11
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Options
COTTONS ECO
Cottons Eco4)
90°-40°
Main wash - Rinses
Maximum spin speed 1000 rpm
Max. load 6 kg
White and coloured cotton. This programme can be selected for slightly or normally soiled cotton items. The temperature will decrease and the washing time will be extended. This allows to obtain a good washing efficiency by
saving energy.
SPIN, RINSE HOLD,
EASY IRON 2), EXTRA
RINSE
COTTONS ECO + PREWASH
Cottons Eco + Prewash4)
90°-40°
Prewash - Main wash - Rinses
Maximum spin speed 1000 rpm
Max. load 6 kg
White and coloured cotton. This programme can be selected for normally soiled cotton items. The temperature will
decrease and the washing time will be extended. This allows to obtain a good washing efficiency by saving energy.
SPIN, RINSE HOLD,
EASY IRON 2), EXTRA
RINSE
SYNTHETICS NORMAL
Synthetics Normal
60°-Cold
Main wash - Rinses
Maximum spin speed 700 rpm
Max. load 3 kg - Reduced load 1.5 kg 1)
Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses.
SPIN, RINSE HOLD,
EASY IRON 2), SUPER
QUICK, EXTRA RINSE
SYNTHETICS NORMAL + PREWASH
Synthetics Normal + Prewash
60°-Cold
Prewash - Main wash - Rinses
Maximum spin speed 700 rpm
Max. load 3 kg - Reduced load 1.5 kg 1)
Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses.
SPIN, RINSE HOLD,
EASY IRON 2), SUPER
QUICK, EXTRA RINSE
DELICATES
Delicates
40°-Cold
Main wash - Rinses
Maximum spin speed 700 rpm
Max. load kg 3 - Reduced load 1.5 kg1)
Delicate fabrics: acrylics, viscose, polyester.
12
Detergent
Compartment
3)
SPIN, RINSE HOLD,
SUPER QUICK, EXTRA RINSE
www.zanussi.com
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Options
WOOL
Wool
40°-Cold
Main wash - Rinses
Maximum spin speed 1000 rpm
Max. load 2 kg
Washing programme for machine washable wool as well as
for hand washable woollens and delicate fabrics. Note: A
single or bulky item may cause imbalance. If the appliance
doesn’t perform the final spin phase, add more items, redistribute the load manually and then select the spinning programme.
SPIN, RINSE HOLD
HANDWASH
Handwash
30°-Cold
Main wash - Rinses
Maximum spin speed 1000 rpm
Max. load 2 kg
Special programme for delicate fabrics with «hand washing» care symbol.
SPIN, RINSE HOLD
JEANS
Jeans
60°-Cold
Main wash - Rinses
Maximum spin speed 1000 rpm
Max. load 3 kg
With this programme it is possible to wash items like pants,
shirts or jackets in denim and also jersey realized with hitech materials. (The Extra Rinse option will be activated automatically).
SPIN, RINSE HOLD,
EASY IRON 2)
SPORT INTENSIVE
Sport Intensive
40°-Cold
Prewash - Main wash - Rinses
Maximum spin speed 700 rpm
Max. load 3 kg
This programme is suitable for washing heavily soiled sport
items. The machine will add automatically a prewash phase
before the main wash to eliminate mud stains.
SPIN, RINSE HOLD,
EXTRA RINSE
www.zanussi.com
Detergent
Compartment
13
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Options
RINSES
Rinses
Rinses
Maximum spin speed 1000 rpm
Max. load 6 kg
With this programme it is possible to rinse and spin cotton
garments which have been washed by hand. The machine
performs 3 rinses, followed by a final long spin. The spin
speed can be reduced.
Detergent
Compartment
SPIN, RINSE HOLD,
EASY IRON 2), EXTRA
RINSE
DRAIN
Drain
Draining of water
Max. load 6 kg
For emptying out the water of the last rinse in programmes
with the Rinse Hold option selected.
SPIN
Spin
Drain and long spin
Maximum spin speed 1000 rpm
Max. load 6 kg
Separate spin for hand washed garments and after programmes with the Rinse Hold option selected. You can
choose the spin speed by pressing the relevant button to
adapt it to the fabrics to be spun.
SPIN
O = OFF
For cancelling the programme which is running or to switch the machine off .
1) If you select the Super Quick option by pressing button 4, we recommend that you reduce the maximum load
as indicated. Full loading is possible however with somewhat reduced cleaning results.
2) Max. load with Easy iron option 1 kg
3) If using liquid detergents, a programme without PREWASH must be selected.
4) This programme is not active at a temperature lower than 40°C.
What to do if…
Certain problems are due to lack of simple
maintenance or oversights, which can be solved
easily without calling out an engineer. Before
contacting your local Service Centre, please
carry out the checks listed below.
During machine operation it is possible that the
red pilot light of button 6 blinks to indicate that
the machine is not working.
14
Once the problem has been eliminated, press
the button 6 to restart the programme. If after all
checks, the problem persists, contact your local
Service Centre.
www.zanussi.com
Problem
Possible cause/Solution
The washing machine does
not start:
The door has not been closed (the button 6 red light blinks).
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The programme selector dial is not correctly positioned and the button 6
has not been pressed.
• Please turn the selector dial and press the button 6 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The machine does not fill:
The water tap is closed (the button 6 red light blinks).
• Open the water tap.
The inlet hose is squashed or kinked (the button 6 red light blinks).
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked (the button 6
red light blinks).
• Clean the water inlet filters. (See "Cleaning the water inlet filters" for
more details).
The door is not properly closed (the button 6 red light blinks).
• Close the door firmly.
The machine does not empty
and/or does not spin:
The drain hose is squashed or kinked (the button 6 red light blinks).
• Check the drain hose connection.
The drain filter is clogged (the button 6 red light blinks).
• Clean the drain filter.
An option or a programme that ends with the water still in the tub or a
that eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
There is water on the floor:
Too much detergent or unsuitable detergent (creates too much foam) has
been used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It is
not always easy to see this as the water runs down the hose; check to
see if it is damp.
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Replace it with a new one.
The emergency emptying cap has not been replaced into the filter cover
or the filter has not been properly screwed in after cleaning action.
• Refit the emergency emptying cap into the filter cover or screw the filter fully in.
www.zanussi.com
15
Problem
Possible cause/Solution
Unsatisfactory washing results:
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait a few minutes before opening the door.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The machine vibrates is noisy:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Spinning starts late or the
machine does not spin:
The electronic unbalance detection device has cut in because the laundry
is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes,
the laundry is still not evenly distributed in the drum, the machine will not
spin. In this case, redistribute the load manually and select the spin programme.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually and then select the
spinning programme.
Mod
Prod . ...
. No.
...
...
...
...
..
Ser.
No.
...
...
...
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the
Service Centre will require this information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
16
www.zanussi.com
Technical data
Dimensions
Width
Height
Depth
Electrical connection
Information on the electrical connection is given on the rating plate, on
the inner edge of the appliance door.
Water supply pressure
Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load
Cotton
6 kg
Spin Speed
Maximum
1000 rpm
Programme
60 cm
85 cm
44 cm
Energy consumption
(KWh)
Water consumption
(litres)
Programme duration
(Minutes)
Cottons 60°
1.30
59
130
Cottons ECO 60° 1)
1.02
45
155
Cottons 40°
0.75
59
125
Synthetics 40°
0.50
45
80
Delicates 40°
0.55
55
70
Wool/ Handwash 30°
0.30
50
60
1) «Cottons Eco» at 60°C with a load of 6 kg is the reference programme for the data entered in the energy
label, in compliance with EEC 92/75 standards.
Off Mode (W)
Left On Mode (W)
0.10
0.98
The information given in the charts above are in compliance with the EU Commission regulation 1015/2010
implementing directive 2009/125/EC.
The consumption data shown on this chart is to be considered purely indicative, as it may vary
depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
Care and cleaning
Warning! You must DISCONNECT the
appliance from the electricity supply,
before you can carry out any cleaning or
maintenance work.
Descaling
The water we use normally contains lime. It is a
good idea to periodically use a water softening
powder in the machine. Do this separately from
any laundry washing, and according to the softening powder manufacturer's instructions. This
www.zanussi.com
will help to prevent the formation of lime deposits.
External cleaning
Clean the exterior cabinet of the appliance with
soap and water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser
drawer should be cleaned regularly.
17
must be cold before you clean the drain
pump.
Proceed as follows:
Remove the drawer
by pressing the catch
downwards and by
pulling it out. Flush it
out under a tap, to remove any traces of
accumulated powder.
To aid cleaning, the
top part of the additive compartment
should be removed.
Open the pump door.
Put a container below the recess of the drain
pump to collect the water that flows out.
Cleaning the drawer recess
Having removed the
drawer, use a small
brush to clean the recess, ensuring that all
washing powder residue is removed from
the upper and lower
part of the recess.
Press the two levers and pull forward the
drainage duct to let the water flow out.
Replace the drawer and run the rinse programme without any clothes in the drum.
Cleaning the pump
The pump should be inspected regularly and
particularly if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise during
draining due to objects such as safety pins,
coins etc. blocking the pump;
• a problem with water draining is detected
(see chapter “What to do if...” for more details).
1.
2.
18
Warning!
Disconnect the mains plug from the mains
socket.
Do not remove the filter while the appliance
operates. Do not clean the drain pump if
the water in the appliance is hot. The water
When the container is full of water, put the
drainage duct back again and empty the container. Do steps 3 and 4 again and again until
no more water flows out from the drain pump.
1
2
www.zanussi.com
Pull back the drainage duct.
Unscrew the filter and remove it.
Caution! When the appliance is in use
and depending on the programme selected
there can be hot water in the pump.
Never remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When refitting
the pump cover, ensure it is securely retightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filters
Remove fluff and objects from the pump.
Important! If the appliance doesn't fill, takes
long to fill with water, the starting button blinks
yellow or the display (if available) shows the
relevant alarm (see chapter "What to do if..." for
more details), check if the water inlet filters are
blocked .
To clean the water inlet filters:
Make sure that the impeller of the pump can
turn. If this does not occur, contact the service
centre.
1
2
• Turn off the water
tap.
• Unscrew the hose
from the tap.
• Clean the filter in
the hose with a stiff
brush.
• Screw the hose back onto the tap. Make
sure the connection is tight.
Clean the filter under the water tap and put it
back in the pump into the special guides.
Make sure that you tighten correctly the filter
to prevent leakages.
• Unscrew the hose from the machine. Keep
a rag nearby because some water may flow.
• Clean the filter in the valve with a stiff brush
or with the piece of cloth.
Close the pump door.
www.zanussi.com
19
Make sure that the temperature is more than 0
°C before you use the appliance again.
The manufacturer is not responsible for damages caused by low temperatures.
35°
45°
• Screw the hose back to the machine and
make sure the connection is tight.
• Turn on the water tap.
Frost precautions
If the machine is installed in a place where the
temperature could drop below 0°C, remove the
remaining water from the inlet hose and the
drain pump.
1. disconnect the mains plug from the mains
socket.
2. close the water tap
3. unscrew the water inlet hose from the tap;
4. put the two ends of the inlet hose in a container and let the water flow out of the
hose.
5. empty the drain pump as described in the
‘Emergency emptying out’ section.
6. when the drain pump is empty, install the
water inlet hose again.
Warning!
Emergency emptying out
If the appliance cannot drain the water, proceed
as follows to empty out the machine:
1. pull out the plug from the power socket;
2. close the water tap;
3. if necessary, wait until the water has cooled
down;
4. open the pump door;
5. place a container on the floor below the recess of the drain pump;
6. press the two levers and pull forward the
drainage duct to let the water flow out;
7. when the container is full of water, put the
drainage duct back again and empty the
container;
repeat this operation until water stops flowing out;
8. if necessary clean the pump (refer to the
section ‘Cleaning the pump’ );
9. close the drain pump door.
When you drain the water with the emergency
drain procedure, you must activate again the
drain system:
1. Put 2 litres of water in the main wash compartment of the detergent dispenser.
2. Start the programme to drain the water.
Installation
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever has
to be transported again.
20
www.zanussi.com
After removing all the
packaging, carefully
lay machine on it's
back to remove the
polystyrene base from
the bottom.
Remove the power
supply cable and the
drain hose from the
hose holders on the
rear of the appliance.
raising or lowering the feet. The feet may be
tight to adjust as they incorporate a self locking
nut, but the machine MUST be level and stable.
Any necessary adjustment can be made with a
spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
Never place cardboard, wood or similar materials under the machine to compensate for any
unevenness in the floor.
If necessary, check
the setting with a spirit level.
Water inlet
Unscrew the three
bolts.
Slide out the relevant
plastic spacers.
Open the porthole
and remove the polystyrene block fitted on
the door seal and all
objects inside the
drum.
Fill the smaller upper
hole and the two
large ones with the
corresponding plastic
plug caps supplied in
the bag containing
the instruction booklet.
Caution!
• This appliance must be connected to a
cold water supply
• Before connecting up the appliance to
new pipework or to pipework that has
not been used for some time, run off a
reasonable amount of water to flush out
any debris that may have collected
• Do not use the hose from your previous
appliance to connect to water supply.
The inlet hose is supplied with the appliance
and can be found inside the machine drum.
Positioning
Install the machine on a flat hard floor. Make
sure that air circulation around the machine is
not impeded by carpets, rugs etc. Check that
the machine does not touch the wall or other
kitchen units. Level the washing machine by
www.zanussi.com
21
Hooked over the
edge of a sink using the plastic
hose guide.
35°
45°
Open the porthole and extract the inlet hose.
Connect the hose with the angled connection
to the machine. Do not place the inlet hose
downwards. Angle the hose to the left or right
depending on the position of your water tap.
Set the hose correctly by loosening the ring
nut.
In this case, make sure the end cannot come
unhooked when the machine is emptying. This
could be done by tying it to the tap with a
piece of string or attaching it to the wall.
Connect the hose to
a tap with a 3/4”
thread.
• After positioning the inlet hose, be sure to
tighten the ring nuts again to prevent leaks.
• The inlet hose must not be lengthened. If it
is too short and you do not wish to move
the tap, you will have to purchase a new,
longer hose specially designed for this type
of use.
In a sink drain pipe branch. This branch
must be above the trap so that the bend is at
least 60 cm above the ground.
Directly into a drain pipe at a height of
not less than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the
drain pipe must be larger than the outside diameter of the drain hose. The drain hose must
not be kinked.
Water drainage
The end of the drain hose can be positioned in
three ways:
Environment concerns
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
22
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
www.zanussi.com
Packaging materials
The materials marked with the symbol
are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them properly in appropriate collection containers.
Ecological hints
To save water, energy and to help protect the
environment, we recommend that you follow
these tips:
www.zanussi.com
• Normally soiled laundry may be washed without prewashing in order to save detergent,
water and time (the environment is protected
too!).
• The machine works more economically if it is
fully loaded.
• With adequate pre-treatment, stains and limited soiling can be removed; the laundry can
then be washed at a lower temperature.
• Measure out detergent according to the water hardness, the degree of soiling and the
quantity of laundry being washed.
23
132952721-A - 082013
www.zanussi.com/shop

advertisement

Related manuals

Download PDF

advertisement