Electrolux EWN1020 User Manual

Add to My manuals
22 Pages

advertisement

Electrolux EWN1020 User Manual | Manualzz
132987171_cop.qxd
5-5-2005
16:21
Pagina 1
WASHING MACHINE
TVÄTTMASKIN
PYYKINPESUKONE
STIRALWNAÅ MAfiINA
INSTRUCTION BOOKLET
BRUKSANVISNING
KÄYTTÖOHJE
RUKOVODSTVO PO ÈKSPLUATACII
EWN 820
EWN 1020
GB
S
FIN
132 987 171
RUS
132987171.qxd
05/05/2005
17.23
Pagina
2
Dear customer,
Transport damages
Please read these operating instructions carefully
and pay particular attention to the safety notes
indicated in the first pages. We recommend that you
keep this instruction booklet for future reference and
pass it on to any future owners.
When unpacking the appliance, check that it is not
damaged. If in doubt, do not use it and contact the
Service Centre.
Contents
Warnings
3
Disposal
4
Tips for environmental protection
4
Technical specifications
Before loading the laundry
11
Maximum loads
11
Laundry weights
11
Removing stains
11-12
Detergents and additives
International wash code symbols
4
Operating sequence
12
13
14-16
Installation
5
Unpacking
5
Positioning
5
Water inlet
5
Door seal
18
Water drainage
6
Bodywork
18
Electrical connection
6
Detergent dispenser drawer
Programme Chart
Maintenance
Drain pump
Your new washing machine
7
Description of the appliance
7
Detergent dispenser drawer
Use
7
17
18
18
18-19
Water inlet filter
19
Emergency emptying out
19
Frost precautions
19
Something not working?
20-21
8
Control panel
Controls
Washing hints
8
8-10
11
Sorting the laundry
11
Temperatures
11
The symbols you will see on some paragraphs of this booklet have the following meaning:
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is
particularly important for your safety or correct functioning of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use
of the appliance.
Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the
environment: we use recycled paper.
2
132987171.qxd
05/05/2005
17.23
Pagina
3
The following warnings are provided in the interests of overall safety. You must read them carefully before
installing or using the appliance.
• Leave the porthole door slightly ajar when the
appliance is not in use. This preserves the door
seal and prevents the formation of musty smells.
Installation
• All internal packing must be removed before using
the appliance. Serious damage may be caused to
the machine or adjacent furniture if the protective
transit devices are not removed or are not
completely removed. Refer to the relevant
paragraph in the instruction book.
• Always check that water has emptied out before
opening the door. If not, drain the water following
the instructions in the instruction book.
• Always unplug the appliance and shut the water
tap after use.
• Any electrical work required to install this
appliance must be carried out by a qualified
electrician.
General safety
• Any plumbing work required to install this
appliance must be carried out by a qualified
plumber.
• Repairs to the machine must be carried out only
by qualified personnel. Repairs carried out by
inexperienced persons could cause serious
danger. Contact your local Service Centre.
• After having installed the machine, check that it is
not standing on its electrical supply cable.
• Never pull the power supply cable to remove the
plug from the socket; always take hold of the plug
itself.
• If the appliance is placed on a carpeted floor,
ensure that air can circulate freely between the
feet and the floor.
• During high temperature wash programmes the
door glass may get hot. Do not touch it!
Use
• This appliance is designed for domestic use. It
must not be used for purposes other than those
for which it was designed.
Child safety
• Children are often not aware of how dangerous
electrical appliances can be. When the machine is
working, children should be carefully supervised
and not be allowed to play with the appliance.
• Only wash fabrics which are designed to be
machine washed. Follow the instructions on each
garment label.
• The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children danger of suffocation! Keep them out of children’s
reach.
• Do not overload the appliance. Follow the
instructions in the instruction book.
• Make sure that all pockets are empty. Objects
such as coins, safety pins, pins and screws can
cause extensive damage.
• Keep all detergents in a safe place out of
children’s reach.
• Do not machine wash garments saturated with
petroleum, methylated spirits, trichlorethylene, etc.
If such fluids have been used to remove stains
prior to washing, wait until they have completely
evaporated from the fabric before placing
garments in the appliance.
• Make sure that children or pets do not climb into
the drum.
• When the appliance is to be scrapped, cut off the
electrical supply cable and destroy the plug with
the remaining cable. Disable the door catch in
order to prevent children from becoming trapped
inside while playing.
• Place small items such as socks, belts, etc. in a
cloth bag or pillowcase to prevent them getting
trapped between the drum and the tub.
• Use only the recommended quantities of fabric
softener. An excessive amount could damage the
laundry.
3
ENGLISH
Warnings
132987171.qxd
05/05/2005
17.23
Pagina
4
Disposal
Packaging materials
The materials marked with the symbol
recyclable.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
are
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing
of them properly in appropriate collection
containers.
Machine
Use authorised disposal sites for your old appliance.
Help to keep your country tidy!
Tips for environmental protection
To save water, energy and to help protect the
environment, we recommend that you follow these
tips:
• With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature, so saving energy.
• Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
• Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
• The machine works more economically if it is fully
loaded, but do not overload it.
Technical specifications
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
62 cm
MAXIMUM LOAD
Cotton
Synthetics
Delicates
Woollens/hand wash
5.0 kg
2.5 kg
2.5 kg
2.0 kg
SPIN SPEED
800 rpm max. (EWN 820)
1000 rpm max. (EWN 1020)
POWER SUPPLY VOLTAGE/FREQUENCY
TOTAL POWER ABSORBED
MINIMUM FUSE PROTECTION
220-230 V/50 Hz
2200 W
10 A
WATER PRESSURE
0.05 MPa
0.8 MPa
Minimum
Maximum
This appliance complies with the following EEC Directives:
73/23/EEC of 19/02/73 relating to low voltage
89/336/EEC of 03/05/89 relating to electromagnetic compatibility.
4
132987171.qxd
05/05/2005
17.23
Pagina
5
Unpacking
5. Set the machine upright and remove the
remaining rear screw. Slide out the relevant pin.
All transit bolts and packing must be
removed before using the appliance.
6. Plug all the holes with the plugs which you will
find in the envelope containing the instruction
booklet.
You are advised to keep all transit devices so that
they can be refitted if the machine ever has to be
transported again.
1. Using a spanner, unscrew and remove the two
rear bottom screws. Slide out the two plastic
pins. Lay the machine on its back, taking care
not to squash the hoses. This can be avoided by
placing one of the corner packing pieces
between the machine and the floor.
P1128
P0002
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is
not impeded by carpets, rugs etc. Check that the
machine does not touch the wall or other kitchen
units.
Carefully level by screwing the adjustable feet in or
out. Never place cardboard, wood or similar
materials under the machine to compensate for any
unevenness in the floor.
P0001
P1129
2. Remove the polystyrene block from the bottom
of the machine and release the two plastic bags.
3. Very carefully slide out the left polythene bag,
removing it towards the right and then
downwards.
1
2
3
P1124
P1051
Water inlet
P1126
Connect the water inlet hose to a tap with a 3/4"
thread. Do not use already employed hoses.
4. Very carefully slide out the right polythene bag,
removing it towards the left and then upwards.
The other end of the inlet hose which connects to
the machine can be turned in any direction. Simply
loosen the fitting, rotate the hose and retighten the
fitting, making sure there are no water leaks.
P1127
P1088
5
P0021
ENGLISH
Installation
132987171.qxd
05/05/2005
17.23
Pagina
6
Electrical connection
The inlet hose must not be lengthened. If it is too
short and you do not wish to move the tap, you will
have to purchase a new, longer hose specially
designed for this type of use.
This machine is designed to operate on a 220-230
V, single-phase, 50 Hz supply.
Check that your domestic electrical installation can
take the maximum load required (2.2 kW), also
taking into account any other appliances in use.
Water drainage
Connect the machine to an earthed socket.
The end of the drain hose can be positioned in three
ways:
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
Should the appliance power supply cable
need to be replaced, this must be carried out
by our Service Centre.
Hooked over the edge of a sink using the plastic
hose guide supplied with the machine. In this
case, make sure the end cannot come unhooked
when the machine is emptying.
This could be done by tying it to the tap with a piece
of string or attaching it to the wall.
The power supply cable must be easily
accessible after installing the appliance.
P0022
In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm
above the ground.
Directly into a drain pipe at a height of not less
than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain pipe
must be larger than the outside diameter of the drain
hose.
The drain hose must not be kinked. Run it along the
floor; only the part near the drainage point must be
raised.
P0023
6
132987171.qxd
05/05/2005
17.23
Pagina
7
This new washing machine meets all modern needs for effective treatment of laundry with low water, energy
and detergent consumption.
• The possibility of selecting the temperature, spin speed and all the options offered by this washing machine
gives you truly “customised” washing.
• The programme progress display shows the programme steps selected and the programme phase which
is running.
• The special wool programme with its new delicate wash system treats your woollens with extreme care.
• The balance control device ensures the machine is stable during the spin.
• Automatic cooling of the wash water to 60°C before draining, with the 95°C programme. This reduces
thermal shock to fabrics, helping to prevent creasing.
Description of the appliance
1 Detergent dispenser drawer
1
2
2 Control panel
3 Door handle
4 Drain filter
95°C
60°C
40°C
30°C
800
700
600
500
/
EWN 820
5 Adjustable feet
3
4
5
Detergent dispenser drawer
Prewash
Main wash
Fabric softener, starch
C0063
7
ENGLISH
Your new washing machine
132987171.qxd
05/05/2005
17.23
Pagina
8
Use
Control panel
1 2
3
95°C
60°C
40°C
30°C
800
700
600
500
4
5
/
7
6
8
9
10
By selecting position
the machine will wash with
cold water. To be used for extremely delicate items,
such as curtains.
1 ON/OFF button
Press this button to switch the washing machine on.
Press the ON/OFF button
again to switch the
machine off.
Important!
By depressing TEMPERATURE
and SPIN
SPEED
buttons simultaneously, the acoustic
signal is switched off in the following cases:
2 MAINS-ON light
• when depressing the buttons
This light is connected to the ON/OFF button
. It
lights up when you press the button, and goes out
when you press it again.
• when an incorrect option selection is made
• at the end of the programme.
3 FABRIC button
5 SPIN SPEED button
Press this button repeatedly to select the programme
on the basis of the type of laundry to be washed. The
light relevant to the selected programme will light up.
The washing machine will propose a temperature and
automatically select the maximum spin value provided for the programme you have chosen. You can
change these values by operating buttons 4 and 5.
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine. The relevant light will light up.
Maximum speeds are:
EWN 820
Hand wash
When you select this programme, you obtain a
particularly delicate washing, suitable for articles of
clothing whose label indicates that they must be
hand-washed
.
• for cottons, synthetics, wool and handwash: fo
800 rpm;
• for delicate fabrics: 700 rpm.
EWN 1020
• for cottons::1000 rpm;
4 TEMPERATURE button
• for synthetics, wool and handwash: 900 rpm;
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be washed
at a temperature different from the one proposed by
the washing machine. The relevant light will light up.
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be handwashed.
• for delicate fabrics: 700 rpm.
8
05/05/2005
17.23
Pagina
9
8 START/PAUSE button
RINSE HOLD position
: when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
This button has two functions:
• Start: after you have selected the desired
programme and options, press this button to start
the washing machine. The light above the button
will stop flashing and remain lit.
At the end of the cycle the door is locked, the light
of the START/PAUSE button goes off, the pilot
lights
and
remain lit, to indicate that the
water must be drained.
To complete the cycle, choose one of the following
options:
• Pause: when you press this button again, the
programme in progress is interrupted. The light
above the button will start flashing. To restart the
programme, press the button again.
• Drain
:
Press the SKIP/RESET button once, all the leds are
off, then press
button in order to select the
desired programme. If you wish to drain
or to
spin
press SKIP/RESET button until the led of
the desired function remains lit.
You can change the spin speed by means of
button and then depress START/PAUSE button.
Important! You must set the washing machine to
PAUSE before you make any change in the
programme in progress.
9 SKIP/RESET button
At the end of a programme, you must press this
button once or repeatedly, in order to clear the
contents of the memory; otherwise, the next time
you switch the washing machine on, the pilot lights
relevant to the end of the previous cycle will go on.
Important! If you accidentally press the RESET
button more than once, the programme is cancelled.
To cause the washing machine to drain the water,
select any washing programme by means of the
FABRIC button
, then press RESET three times
in order to select the DRAIN
position (only the
DRAIN light
will light up).
You can also press the RESET button to exclude
one or several phases of the programme which is
running, as indicated below.
- set the washing machine to PAUSE by pressing
the START/PAUSE button (the relevant light will
flash);
6-7 OPTIONS buttons
Press these buttons to select the following options:
- press the RESET button once or several
times, until the required phase(s) is(are) cancelled
(the light next to the symbol of the phase(s) will go
out).
• PREWASH
: select this option if you wish your
laundry to be prewashed before the main wash
(not available for wool and handwash).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained.
Example:
/
• QUICK WASH
: for laundry that is only slightly
soiled (not for wool and HAND WASH
programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
The PREWASH and QUICK WASH options
cannot be selected together.
• ECONOMY
: this option can be selected only
for cottons and synthetics lightly or normally
soiled with a temperature 40°C or higher. The
washing time will be prolonged and the washing
temperature will be reduced.
In this case, the spin
(at the speed provided
for the selected type of
fabric) will be
performed.
This button allows you also to select special
programmes, such as RINSES, SPIN and DRAIN.
• If the machine is already switched on because it
has just performed a washing programme, proceed
as follows:
9
ENGLISH
132987171.qxd
132987171.qxd
05/05/2005
17.23
Pagina
10
- depress RESET once or repeatedly to cancel the
previously performed programme (all the phase
indicator lights must be off);
10 Programme phase indicator lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
- select the type of fabric by means of the relevant
button;
- select the special programme:
• RINSES
PREWASH/ WASH
AND SPIN
/
RINSES
Depress RESET once, the pilot light
(PREWASH/WASH) goes out.
SPIN
/
DRAIN
END
• SPIN
Depress RESET twice, the pilot lights
/
(PREWASH/WASH) and RINSES
go out.
After you have started the programme, only the light
relevant to the phase that is currently being carried
out will remain lit.
•DRAIN
Depress RESET three times, the pilot lights
/
(PREWASH/WASH), RINSES
and
SPIN
go out and
goes on.
At the end of the programme the pilot light
illuminates.
Example:
The END light
problems:
/
flashes in the event of operating
1 flash = the machine does not fill
In this case the
machine will perform
the rinses and spin.
2 flashes = the machine does not empty
4 flashes = the door has not been closed
To eliminate the problem, see paragraph
“Something not working”.
• If the machine is switched off:
- depress ON/OFF button
to switch it on;
- select the type of fabric by means of the relevant
button:
- select the special programme as previously
described.
10
05/05/2005
17.23
Pagina
11
ENGLISH
132987171.qxd
Maximum loads
Washing hints
Recommended loads are indicated in the
programme charts.
Sorting the laundry
General rules:
Follow the wash code symbols on each garment
label and the manufacturer’s washing instructions.
Sort the laundry as follows:
whites, coloureds, synthetics, delicates, woollens.
Cotton, linen: drum full but not too tightly packed;
Temperatures
Washing a maximum load makes the most efficient
use of water and energy.
95°
for normally soiled white cottons and linen
(e.g. tea cloths, towels, tablecloths,
sheets...)
For heavily soiled laundry, reduce the load size.
60°
for normally soiled, colour fast garments
(e.g. shirts, night dresses, pyjamas....) in
linen, cotton or synthetic fibres and for
lightly soiled white cotton (e.g.
underwear).
Laundry weights
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more than
one third full.
The following weights are indicative:
bathrobe
(cold) for delicate items (e.g. net curtains), mixed
30°-40° laundry including synthetic fibres and
woollens.
The wool wash cycle of this machine has
been approved by Woolmark for the
washing of machine washable Woolmark
products provided that the garments are
washed according to the instructions on
the garment label and those issued by the
manufacturer of this washing machine.
Licence No. M9604.
1200 g
napkin
100 g
quilt cover
700 g
sheet
500 g
pillow case
200 g
tablecloth
250 g
towelling towel
200 g
tea cloth
100 g
night dress
200 g
ladies’ briefs
100 g
man’s work shirt
600 g
man’s shirt
200 g
Before loading the laundry
man’s pyjamas
500 g
Never wash whites and coloureds together. Whites
may lose their “whiteness” in the wash.
blouse
100 g
men’s underpants
100 g
New coloured items may run in the first wash; they
should therefore be washed separately the first time.
Removing stains
Make sure that no metal objects are left in the
laundry (e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks
and poppers. Tie any belts or long tapes.
Stubborn stains may not be removed by just water
and detergent. It is therefore advisable to treat them
prior to washing.
Remove persistent stains before washing. Rub
particularly soiled areas with a special detergent or
detergent paste.
Blood: treat fresh stains with cold water. For dried
stains, soak overnight in water with a special
detergent then rub in the soap and water.
Treat curtains with special care. Remove hooks or
tie them up in a bag or net.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and dab the
stain; treat several times.
Dried grease stains: moisten with turpentine, lay
the garment on a soft surface and dab the stain with
the fingertips and a cotton cloth.
11
132987171.qxd
05/05/2005
17.23
Pagina
12
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with rust
stains which are not recent since the cellulose
structure will already have been damaged and the
fabric tends to hole.
The detergent and any additives must be placed in
the appropriate compartments of the dispenser
drawer before starting the wash programme.
Mould stains: treat with bleach, rinse well (whites
and fast coloureds only).
Pour liquid detergent into the dispenser drawer
compartment marked
just before starting the
programme.
If using concentrated powder or liquid detergents, a
programme without prewash must be selected.
Grass: soap lightly and treat with bleach (whites and
fast coloureds only).
Any fabric softener or starching additives must be
poured into the compartment marked
before
starting the wash programme.
Ball point pen and glue: moisten with acetone (*),
lay the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat
stains with methylated spirits. Remove any residual
marks from white fabrics with bleach.
Follow the product manufacturer’s
recommendations on quantities to use and do not
exceed the «MAX» mark in the detergent
dispenser drawer.
Red wine: soak in water and detergent, rinse and
treat with acetic or citric acid, then rinse. Treat any
residual marks with bleach.
Quantity of detergent to be used
Ink: depending on the type of ink, moisten the fabric
first with acetone (*), then with acetic acid; treat any
residual marks on white fabrics with bleach and then
rinse thoroughly.
The type and quantity of detergent will depend on
the type of fabric, load size, degree of soiling and
hardness of the water used.
Water hardness is classified in so-called “degrees”
of hardness. Information on hardness of the water in
your area can be obtained from the relevant water
supply company, or from your local authority.
Tar stains: first treat with stain remover, methylated
spirits or benzine, then rub with detergent paste.
(*) do not use acetone on artificial silk.
Follow the product manufacturers’ instructions on
quantities to use.
Detergents and additives
Use less detergent if:
Good washing results also depend on the choice of
detergent and use of the correct quantities to avoid
waste and protect the environment. Although
biodegradable, detergents contain substances
which, in large quantities, can upset the delicate
balance of nature.
– you are washing a small load,
– the laundry is lightly soiled,
– large amounts of foam form during washing.
The choice of detergent will depend on the type of
fabric (delicates, woollens, cottons, etc.), the colour,
washing temperature and degree of soiling.
All commonly available washing machine detergents
may be used in this appliance:
– powder detergents for all types of fabric,
– powder detergents for delicate fabrics (60°C max)
and woollens,
– liquid detergents, preferably for low temperature
wash programmes (60°C max) for all types of
fabric, or special for woollens only.
12
05/05/2005
17.23
Pagina
13
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Energetic wash
95
60
40
30
Max. wash
temperature
95°C
Max. wash
temperature
60°C
Max. wash
temperature
40°C
Max. wash
temperature
30°C
Delicate wash
60
Bleaching
Bleach in cold water
40
Hand wash
30
40
Do not
wash
at all
Do not bleach
Ironing
Hot iron
max 200°C
Warm iron
max 150°C
Lukewarm iron
max 110°C
Do not iron
Dry cleaning
Dry cleaning
in all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning
in petrol,
pure alcohol
and R 113
Do not
dry clean
high
temperature
low
temperature
Drying
Flat
On the line
On clothes
hanger
13
Tumble dry
Do not
tumble dry
ENGLISH
132987171.qxd
132987171.qxd
05/05/2005
17.23
Pagina
14
4. Switch the machine on
Operating sequence
To switch the machine on, press the ON/OFF button
: the mains-on light comes on.
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 95°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
5. Select the desired programme/
fabric
Press the FABRIC button
repeatedly, in order to
select the desired programme/fabric. The relevant
light will light up.
The lights relevant to the phases that form the
programme will light up.
The light of START/PAUSE button will start flashing.
P1084
COTTONS
SYNTHETICS
2. Measure out the detergent
DELICATES
/
WOOL
HANDWASH
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
.
6. Select the temperature
Press the TEMPERATURE button
if you wish to
select a temperature value different from the one
proposed by the washing machine.
The relevant light will light up.
3. Measure out the additives
If required, pour fabric softener into the
compartment marked
without exceeding the
«MAX» mark.
95°C
60°C
40°C
30°C
C0064
C0065
14
05/05/2005
17.23
Pagina
15
7. Select the SPIN SPEED
RINSE HOLD option
10. How to change a programme
during its cycle
or the
Press the SPIN SPEED button
repeatedly, in
order to select the desired spin speed or the RINSE
HOLD option
. The relevant light will light up.
If you select the RINSE HOLD option
, the
machine will stop at the end of the programme with
the water still in the tub.
EWN 820
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any option before the
programme carries it out.
Changing the type of fabric or temperature is
possible, obviously, only by resetting it. When you
make a change in these two parameters, the
washing machine will resume the cycle from the
beginning. The washing water in the tub will not
emptied out.
EWN 1020
800
700
600
500
1000
900
700
500
If it is necessary to drain the water in order to
change the programme in progress, proceed as
follows:
• PAUSE the machine by pressing the
START/PAUSE button;
• press the SKIP/RESET button
repeatedly, until
only the DRAIN light
remains lit;
8. Select the desired options
Depress the relevant button to select the required
options. The relevant light illuminates.
• press the START/PAUSE button again.
When the water has been drained, you may select a
new programme and press the START/PAUSE
button to start it.
11. How to cancel a programme
during its cycle
To cancel a programme that is being carried out,
first pause the washing machine by pressing the
START/PAUSE button, then press the SKIP/RESET
button repeatedly, until the phase indicator lights go
out.
9. Start the programme
Press the START/PAUSE button. The relevant light
will stop flashing and only the light relevant to the
phase that is in progress will remain lit.
12. How to open the door during
a programme
You can open the door, after having set the washing
machine to PAUSE, provided the following
conditions exist:
• the washing machine is not in the heating phase;
• the level of the water is not high;
• the drum is not turning.
If these requirements are met, when you pause the
washing machine, the door can be opened.
Should it not be possible to open the door, and
should it be absolutely necessary to do so, switch
the machine off by pressing the ON/OFF button.
After approximately 3 minutes, you can open the
door.
15
ENGLISH
132987171.qxd
132987171.qxd
05/05/2005
17.23
Pagina
16
Pay attention to the level and temperature of the
water in the washing machine!
When you close the door and press the ON/OFF
button again, the washing machine will resume the
programme from the point where it had been
interrupted.
13. End of programme
The machine stops automatically.
If the RINSE HOLD
has been selected, the
porthole is blocked, the light of the START/PAUSE
button goes off, the pilot lights
and
remain
lit, to indicate that the water must be drained.
When the programme has been completed, the pilot
light
will go on again.
Press the SKIP/RESET button repeatedly to
erase the programme that has just been carried
out. If you omit to do this, the next time you
switch the washing machine on, the pilot lights
relevant to the end of the previous cycle will go
on.
Note: when you switch the machine on, if you must
erase the previously performed programme, it is
also sufficient to press the FABRIC button
and
select a new programme.
Press the ON/OFF button
to switch the machine
off. The relevant light will go out.
Remove the laundry from the washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get
damaged in a subsequent wash (e.g. by shrinking)
or bleed colour into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the washing
machine.
16
132987171.qxd
05/05/2005
17.23
Pagina
17
Type of
laundry and
symbols on
labels
60
Programme/
temperature
5 kg
Cottons
60°-95°C
95
White cotton:
e.g. sheets,
tablecloths,
household
linen
60
Consumption*
Max
load
40
30
Coloured
cotton: e.g.
shirts,blouses,
underwear,
towels, household linen
5 kg
**
5 kg
Cottons+
40
30
Synthetic
fabrics and
blends: e.g.
shirts,blouses,
underwear
40
2.5 kg
30
Delicate fab- 2.5 kg
rics: e.g.
acrylic fabrics,
viscose, polyester, synthetic blends
40
30
2 kg
Wool
2 kg
Main wash at
60°-95°C
3 rinses
Long spin
Main wash at
Cottons
60°-40°-30° or
60°-40°-30°C
cold wash
or
3 rinses
Long spin
Cottons
60°C +
60
Description of
Available options
programme
Main wash at
60°
3 rinses
Long spin
Main wash at
Synthetics
60°-40°-30° or
60°-40°-30°C
cold wash
or
3 rinses
Short spin
Delicates
40°-30°C
or
Wool
40°-30°C
or
Hand wash
40°-30°C
or
Energy
kWh
Water
litres
Time
min.
2.3
66
160
1.4
63
130
1.06
58
150
1.0
58
95
Main wash at
40°-30°C or
cold wash
3 rinses
Short spin
0.55
58
65
Main wash at
40°-30°C or
cold wash
3 rinses
Short spin
0.45
60
55
Main wash at
40°-30°C or
cold wash
3 rinses
Short spin
0.45
60
56
*
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending
on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers
to the highest temperature for each wash programme.
** In compliance with EC directive 92/75 the consumption figures indicated on the Energy label refer to this
programme at 60°C +
.
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable
Woolmark products provided that the garments are washed according to the instructions on the garment label
and those issued by the manufacturer of this machine. Licence No. M9604.
17
ENGLISH
Washing programmes
132987171.qxd
05/05/2005
17.23
Pagina
18
Maintenance
Detergent can also accumulate inside the drawer
recess: clean it with an old toothbrush. Refit the
drawer after cleaning.
Door seal
Check from time to time the door seal and eliminate
eventual possible objects that could be trapped in
the fold.
P0038
P1050 n
Drain filter
Bodywork
The drain filter collects threads and small objects
inadvertently left in the laundry. Check regularly that
the filter is clean.
Clean the outside of the machine with warm water
and a neutral, non-abrasive household detergent.
Rinse with clean water and dry with a soft cloth.
Important: do not use methylated spirits, solvents
or similar products to clean the bodywork.
Open the filter door by pulling it towards the right.
Place a container under the filter to catch any
spillage.
Detergent dispenser drawer
Release the emergency emptying hose, place it in
the container, and remove its cap by unscrewing it.
After a while, detergents and fabric softeners leave
deposits in the drawer.
Clean the drawer from time to time by rinsing it
under a running tap. To remove the drawer from the
machine, press the button in the rear left-hand
corner.
To facilitate cleaning, the top part of the additive
compartment can be removed.
P1062
P1085
When no more water comes out, unscrew the filter
and remove it.
C0066
C0067
P1061
P0040
Clean the filter under a running tap, then refit it,
screwing it fully in.
Put the cap back on the emergency emptying hose,
place the latter back in its seat. Close the filter door.
C0068
P1086
18
05/05/2005
17.23
Pagina
19
ENGLISH
132987171.qxd
Water inlet filter
If you notice that the machine is taking longer to fill,
check that the filter in the water inlet hose is not
blocked.
Turn off the water tap.
Unscrew the hose from the tap.
Clean the filter with a stiff brush.
Screw the hose back onto the tap.
P1090
Emergency emptying out
If the water is unable to drain, proceed as follows to
empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• Place a bowl on the floor under the filter and place
the end of the emergency emptying hose into the
bowl. The water should drain by gravity into the
bowl. When the bowl is full, screw the cap on
again. Empty the bowl. Repeat the procedure until
water stops flowing out.
• Clean the filter if necessary.
• At the end screw the filter again.
The dangers of freezing
If the machine is exposed to temperatures below
0°C, certain precautions should be taken.
• Turn off the water tap.
• Unscrew the inlet hose.
• Place the end of the inlet hose and that of the
emergency emptying hose in a bowl placed on the
floor and let the water drain out.
• Screw the water inlet hose back on and put the
emergency emptying hose back in its place after
having screwed the cap on again.
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
19
132987171.qxd
05/05/2005
17.23
Pagina
20
Something not working?
Problems which you can resolve yourself.
During machine operation it is possible that the END pilot light
working:
flashes to indicate that the machine is not
1 flash = the machine does not fill
2 flashes = the machine does not empty
4 flashes = the door has not been closed
At the same time the buzzer sounds.
Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
Problem
Possible cause
• The machine does not start up:
• The door is not firmly closed.
• The machine is not plugged in or there is no power
at the socket.
• The main fuse has blown.
• The START/PAUSE button has not been
depressed.
• The machine does not fill:
•
•
•
•
• The machine fills then empties
immediately:
• The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage” section.
• The machine does not empty and/or
does not spin:
• The drain hose is squashed or kinked.
• The RINSE HOLD
option has been selected.
• The drain filter is clogged.
• There is water on the floor:
• Too much detergent or unsuitable detergent
(creates too much foam) has been used.
• Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
• The drain hose is damaged.
• The cover of the drain filter has not been correctly
screwed in after cleaning.
• The cap on the emergency emptying hose has not
been replaced after cleaning the filter.
• Unsatisfactory washing results:
• Too little detergent or unsuitable detergent has
been used.
• Stubborn stains have not been treated prior to
washing.
• The correct temperature was not selected.
• Excessive laundry load.
20
The water tap is closed.
The inlet hose is squashed or kinked.
The filter in the inlet hose is blocked.
The door is not properly closed.
05/05/2005
17.23
Pagina
21
Problem
Possible cause
• The machine vibrates or is noisy:
• The transit bolts and packing have not been
removed.
• The support feet have not been adjusted.
• The laundry is not evenly distributed in the drum.
• Maybe there is very little laundry in the drum.
• The machine is in contact with the wall or
furniture.
• The door will not open:
• The programme is still running, the drum is
turning.
• The door lock has not yet released.
• The water level is above the bottom edge of the door.
• The machine is heating the water.
• Spinning starts late or the laundry is
not spun enough:
• The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and
normal spinning can resume. If, after 5 minutes,
the laundry is still not evenly distributed in the
drum, the machine will spin at a lower speed or
will not spin. If at the end of the programme the
laundry is not spun enough, redistribute the load
manually and select the spin programme.
• The machine makes an unusual noise
• The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a
softer start and more even distribution of the
laundry in the drum when spinning, as well as
increased stability of the machine.
• No water is visible in the drum
• Machines based on modern technology operate
very economically using very little water without
affecting performance.
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.
Mod. ..........
Prod. No. ...........
Ser. No. .........
.....
..... .....
d. No.
Mo d.
Pro
P0042•N
21
.....
.
. No
Ser
. .....
....
ENGLISH
132987171.qxd
132987171•rus.qxd
5-5-2005
16:42
Pagina 88
The Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million
Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of
approx.14 billion USD in more than 150 countries around the world.
MADE IN EEC

advertisement

Related manuals

Download PDF

advertisement