Advertisement
Advertisement
152960 73/0en 4-10-2004 17:07 Pagina 1 FAVORIT AUTO Dishwasher Instruction book PERFEKT IN FORM UND FUNKTION 152960 73/0en 4-10-2004 17:07 Pagina 2 Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass it on to any subsequent owner of the appliance. The following symbols are used in the text: Safety instructions Warning! Notes that concern your personal safety. Attention! Notes that show how to avoid damage to the appliance. Useful tips and hints Environmental information Your dishwasher has the new washing system ”IMPULSE WASHING”. With this dishwashing system the motor speed and spray pressure are varied during the wash cycle to achieve better cleaning of the dishes. It is for this reason that the noise level varies during the dishwashing cycle. 2 152960 73/0en 4-10-2004 17:07 Pagina 3 Contents CONTENTS Operating instructions Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Prior to using for the first time Setting the water softener Filling with dishwasher salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different kinds of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters What to do, when... Service Technical specifications Installation instructions Fitting under a counter Levelling Water supply connections Water inlet hose with safety valve Water outlet hose connection Electrical connection Hints for test centres 4 4 6 6 7 8 10 10 12 13 16 16 18 19 20 21 22 23 25 26 30 30 33 36 37 38 38 38 39 40 41 42 43 3 152960 73/0en 4-10-2004 17:07 Pagina 4 Operating instructions OPERATING INSTRUCTIONS Safety instructions The safety of AEG electrical appliances conforms to accepted rules of technology and the Appliance Safety Act. We as manufacturers, however, see ourselves as being obliged to familiarise you with the following safety instructions. It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance. Installation ● ● ● ● ● Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged, you should contact your supplier. For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. Any electrical and plumbing work required to install this appliance should be carried out by a qualified and competent person. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. The sides of the dishwasher must never be drilled to prevent damage to hydraulic components. Child safety ● ● ● 4 This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product. Packaging parts may be dangerous for children, who could even be suffocated! You should therefore keep all packaging well away from children. 152960 73/0en 4-10-2004 17:07 Pagina 5 Operating instructions ● ● The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. Keep children well away from your dishwasher when the door is open. Keep all detergents in a safe place out of children’s reach. Your dishwasher in day-to-day use ● ● ● ● ● ● ● ● ● ● ● Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher. Under no circumstances should you open the door whilst the appliance is in operation, especially during the washing phase, hot water may escape. However, if the door is opened, a safety device ensures that the machine stops. Only use products (detergent, salt and rinse aid) specifically designed for use in dishwashers. Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves. When finishing loading or unloading close the door, as an open door can be a hazard. Do not sit or stand on the open door. Isolate the appliance from the power supply and turn off the water supply after use. This product should be serviced by an authorised service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts. 5 152960 73/0en 4-10-2004 17:07 Pagina 6 Operating instructions Disposal Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled. Plastic parts are marked with standard international abbreviations: >PE< for polyethylene, e.g. sheet wrapping material. >PS< for polystyrene, e.g. padding material (always CFC-free). >POM< for polyoxymethylene, e.g. plastic clips. Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling. As and when you cease to use your dishwasher and withdraw it from service, your should render it unserviceable before having it disposed of. Warning! Children at play could lock themselves in your dishwasher or otherwise endanger their lives. Therefore cut off the power supply cable and make the door closing device unusable to prevent children from being trapped inside. For the disposing of the appliance please take it to a recycling centre or to your dealer who will, for a small contribution to the costs, dispose it for you. Economical and ecological dishwashing ● ● ● ● 6 Ensure that the water softener is correctly adjusted. Do not pre-wash under running water. Select the wash programme to suit the nature and degree of the soiling on the dishes. Do not use more detergent, special salt and rinse aid than is recommended in these operating instructions and by the manufacturer of the respective product. 152960 73/0en 4-10-2004 17:07 Pagina 7 Operating instructions Description of the appliance IN144 1. Upper basket stop 7. Rinse aid dispenser 2. Water hardness dial 8. Filters 3. Salt container 9. Lower spray arm 4. Detergent dispenser 10. Upper spray arm 5. Control panel 11. Upper basket 6. Rating plate 12. Worktop 7 152960 73/0en 4-10-2004 17:07 Pagina 8 Operating instructions The control panel “Delay start” button Digital display Function buttons Indicator lights On/Off Indicator light 1 2 3 Programme selection buttons Door handle On/Off button “3 in 1” button Function buttons: in addition to the dishwashing programme selected, the following functions can also be set with the help of these buttons: - water softener setting, - deactivation/activation of the rinse aid dispenser, - the cancelling of a washing programme. Programme selection buttons: the selection of a washing programme occurs by pressing one of these buttons (see "Washing programmes" chart). "Delay start" button: this option allows the start of the programme to be delayed from 1 to 19 hours. The digital display indicates: - 8 the level of hardness to which the water softener is set, if the rinse aid dispenser is activated/deactivated, the countdown of the delay start, the approximative remaining time of the running programme, fault codes concerning malfunction of the dishwasher. 152960 73/0en 4-10-2004 17:07 Pagina 9 Operating instructions Indicator lights: have the following meanings: Salt refilling indicator light, illuminates when the salt has run out Rinse aid refilling indicator light, illuminates when the rinse aid has run out The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary. Phase indicator lights: have the following meanings: illuminates when the washing/rinsing phases are running illuminates when the drying phase is running illuminates when the washing programme has ended As soon as you select a washing programme, the phase indicator lights for that programme will illuminate. As the programme starts, the phase indicator lights turn off except for the indicator light of the phase in progress. "3 in 1" button: This appliance is equipped with the function 3 in 1, that allows the use of the "3 in 1" combi detergent tablets. This function can be selected with all washing programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated. Once selected this function (button indicator light illuminated ) it will remain active also for the following washing programmes, to deactivate the function, press the button (button indicator light off). 9 152960 73/0en 4-10-2004 17:07 Pagina 10 Operating instructions Prior to using for the first time Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher salt 5. Fill the rinse aid dispenser. Setting the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is. Water hardness is measured in equivalent scales, German degrees, French degrees and mmol/l (millimol per litre). The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area. The water softener must be set in both ways: manually, using the water hardness switch and electronically, using the function push buttons on the control panel. Water hardness °dH °TH mmol/l (german degrees) (french degrees) (millimol per litre, international unit for the hardness of water) Range Adjusting the water hardness setting Manually Electronically 51 - 70 43 - 50 37 - 42 29 - 36 23 - 28 91 - 125 76 - 90 65 - 75 51 - 64 40 - 50 9,0 - 12,5 7,6 - 8,9 6,5 - 7,5 5,1 - 6,4 4,0 - 5,0 IV 19 - 22 15 - 18 33 - 39 26 - 32 3,3 - 3,9 2,6 - 3,2 III 5 4 11 - 14 19 - 25 1,9 - 2,5 II 3 4 - 10 7 - 18 0,7 - 1,8 I/II <4 <7 < 0,7 I 2 1 10 9 8 7 6 2 1 10 no salt necessary Level indicated in the digital display 152960 73/0en 4-10-2004 17:07 Pagina 11 Operating instructions a) Setting manually 1. Open the dishwasher door. 2. Remove the lower basket from the dishwasher. 3. Turn the water hardness dial to position 1 or 2 (see table). 4. Replace the lower basket. The dishwasher is factory set at position 2. AA07 b) Setting electronically 1. 2. 3. 4. 5. (The dishwasher must be switched off) The dishwasher is factory set at level 5. Press the On/Off button. The On/Off indicator light illuminates (setting mode). If other indicator lights are on, this means that a wash programme has been selected. The programme must be cancelled: press simultaneously the function buttons 2 and 3 for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode. Press simultaneously function buttons 2 and 3, until the indicator lights of the function buttons 1, 2 and 3 start flashing. Press the function button 1, the indicator lights of function buttons 2 and 3 turn off while the indicator light of the button 1 goes on flashing, the digital display indicates the current level. Example: = level 5. To change the level, press button 1. Each time the button is pressed the level changes. (For the selection of the new level see the chart). Examples: if the current level is 5, by pressing button 1 once, level 6 is selected. if the current level is 10, by pressing button 1 once, level 1 is selected. To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode. 11 152960 73/0en 4-10-2004 17:07 Pagina 12 Operating instructions Filling with dishwasher salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1. Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise. 2. Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time). 3. Using the funnel provided, pour in the LE SA UT salt until the container is full. ZO LT SA LZ 4. Replace the cap making sure that SA L SE there is no trace of salt on the screw thread or on the gasket. 5. Screw on the cap tightly turning it clockwise until it stops with a click. SR14 The salt container will require topping up periodically. You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished. The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected. Do not worry if water over flows from the unit when filling with salt, this is quite normal. 12 152960 73/0en 4-10-2004 17:07 Pagina 13 Operating instructions Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with rinse aid 1. Open the container by pressing the release button (A). 2. Add the rinse aid until the container is completely full. The maximum level for filling is indicated by “max”. Ensure that the lid is closed after every refill. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash. Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. 13 152960 73/0en 4-10-2004 17:07 Pagina 14 Operating instructions Adjusting the dose According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage). The dose is factory set in position 4. Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades. Top up the rinse aid when the indicator light on the control panel illuminates. 14 152960 73/0en 4-10-2004 17:07 Pagina 15 Operating instructions If you are using dishwasher detergent that includes the rinse aid function, it is necessary to deactivate the rinse aid dispenser, in order to avoid a double dosage. Deactivation/activation of the rinse aid dispenser (The dishwasher must be switched off) Factory setting: rinse aid dispenser activated When the rinse aid dispenser has been deactivated, also the rinse aid indicator light on the control panel is automatically deactivated. 1. Press the On/Off button. The On/Off indicator light illuminates (setting mode). If other indicator lights are on, this means that a wash programme has been selected. The programme must be cancelled: press simultaneously the function buttons 2 and 3 for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode. 2. Press simultaneously function buttons 2 and 3, until the indicator lights of the function buttons 1, 2 and 3 start flashing. 3. Press the function button 2, the indicator lights of function buttons 1 and 3 turn off while the indicator light of the function button 2 goes on flashing, the digital display indicates the current setting. Rinse aid dispenser deactivated Rinse aid dispenser activated (factory setting) 4. To change the setting, press the function button 2 again, the digital display indicates the new setting. 5. To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode. 15 152960 73/0en 4-10-2004 17:07 Pagina 16 Operating instructions In daily use • Check if it’s necessary to refill with dishwasher salt or rinse aid. • Load cutlery and dishes into the dishwasher. • Fill with dishwasher detergent. • Select a wash programme suitable for the cutlery and dishes. • Start the wash programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. • Before loading the dishes, you should: - Remove large left-overs. - Soften remnants of burnt food in pans. • When loading the dishes and cutlery, please note: - Dishes and cutlery must not impede the rotation of the spray arms. - Load hollow items such as cups, glasses, pans etc, with the opening downwards so that water cannot collect in the container or a deep base. - Dishes and items of cutlery must not lie inside one another, or cover each other. - To avoid damage to glasses, they must not touch. - Lay small objects in the cutlery basket. • Plastic items and pans with teflon have a tendency to retain water drops; these items will not dry as well as porcelain and steel items. 16 152960 73/0en 4-10-2004 17:07 Pagina 17 Operating instructions For washing in the dishwasher the following cutlery/dishes are not suitable: •Cutlery with wooden, horn, china or mother-of-pearl handles •Plastic items that are not heat resistant are of limited suitability: •Only wash stoneware in the dishwasher if it is specifically marked as being dishwashersafe by the manufacturer. •Glazed patterns may fade if machine •Older cutlery with glued parts that is washed frequently. not temperature resistant •Silver and aluminium parts have a tendency to discolour during washing. Residues, e.g. •Bonded cutlery items or dishes egg white, egg yolk and mustard often •Pewter or copper items cause discolouring and staining on silver. •Lead crystal glass Therefore always clean left-overs from silver immediately, if it is not to be washed •Steel items subject to rusting straight after use. •Wooden platters •Items made from synthetic fibres •Some types of glass can become dull after a large number of washes. 17 152960 73/0en 4-10-2004 17:07 Pagina 18 Operating instructions Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the spray arms can turn freely. UI94 UI95 The two rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls. UI87 18 152960 73/0en 4-10-2004 17:07 Pagina 19 Operating instructions The cutlery basket Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. Removable knife basket Long and/or sharp items of cutlery such as carving knives must be placed horizontally in the removable knife basket, which is positioned at the rear of the upper basket. UI53 Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. Mix spoons with other cutlery to prevent them from sticking together. For best results we recommend you to use the cutlery grids provided (if the size and dimensions of the cutlery allow it). 2 1 UI80 19 152960 73/0en 4-10-2004 17:07 Pagina 20 Operating instructions The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the cup racks so that water can reach all surfaces. Glasses with long stems can be placed upside down in the cup racks. For teller items, the cup racks can be folded upwards. Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move. US47 US73 Before closing the door, ensure that the spray arms can rotate freely. 20 152960 73/0en 4-10-2004 17:07 Pagina 21 Operating instructions Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Maximum height of the dishes in upper basket lower basket With upper basket raised 20 cm 31 cm With upper basket lowered 24 cm 27 cm To move to the higher position proceed as follows: 1. Move the front runner stops (A) of the upper basket outwards and slide the basket out. 2. Refit the basket in the higher position and replace the stops (A) in their original position. When the basket is in the higher position you will not be able to use the cup rack(s). RC01 After loading your machine always close the door, as an open door can be a hazard. 21 152960 73/0en 4-10-2004 17:07 Pagina 22 Operating instructions Use of detergent Only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Please observe the manufacturer’s dosing and storage recommendations as stated on the detergent packaging. Fill with detergent 1. If the lid is closed: press release button (1). The lid springs open. 2. Fill the detergent dispenser (2) with detergent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent DE19 DE22 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (3). This detergent will take effect during the prewash phase. 4. Close the lid and press until it locks in place. 22 152960 73/0en 4-10-2004 17:07 Pagina 23 Operating instructions Different kinds of detergent Detergent tablets Detergent tablets of different brands dissolve at different speeds. For this reason some detergent tablets cannot dissolve and develop their full cleaning power during short programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of detergent residuals. Do not place the tablets in the tub or in the cutlery basket as this will result in poorer wash results. The tablets should be placed in the detergent dispenser. Concentrated detergent Based on their chemical composition, dishwasher detergents can be split into two basic types: - conventional, alkaline detergents with caustic components. - low alkaline concentrated detergents with natural enzymes. The use of 50°C washing programmes in conjunction with concentrated detergents reduces pollution and is good for your dishes; these wash programmes are specially matched to the dirt-dissolving properties of the enzymes in the concentrated detergent. For this reason 50°C wash programmes in which concentrated detergents are used can achieve the same results that can otherwise only be achieved using 65°C programmes. Combi detergents If you are using dishwasher detergent that includes the rinse aid function, this must be placed in the detergent compartment. In this case it is necessary to deactivate the rinse aid dispenser, in order to avoid a double dosage. 23 152960 73/0en 4-10-2004 17:07 Pagina 24 Operating instructions Use of "3 in 1" combi detergents General advice These products are detergents with integrated and combined detergent/rinse-aid and salt functions. 1. Before using these products you should first check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers (on the product packaging). 2. These products should be strictly used according to the detergent manufacturers instructions. 3. If you encounter problems when using 3 in 1 products for the first time then please contact the detergent manufacturers care line (the telephone number is given on the product packaging). Special advice When using combination 3 in 1 products, we recommend the use of the “3 in 1” function. If you decide to turn back to the use of the standard detergent system we advise that you: ● Refill both the salt container and rinse aid dispenser. ● Switch the water hardness setting to the highest possible position and run from 1 to 3 normal washing programmes without a load. ● Readjust the water hardness setting again according to the hardness of the water in your area. 24 152960 73/0en 4-10-2004 17:07 Pagina 25 Operating instructions Washing programmes 110 1,70 23 bis bis bis 120 1,90 25 AUTOMATIC (50° - 65°) Crockery and cutlery Normal soil • • • • • 1/2x 92 1,10 12 bis bis bis 115 1,50 25 30 MIN 1 Crockery and cutlery Fresh soil - • - • - 30 0,8 ECO 50° 2 Crockery and cutlery Normal soil • • • • • 155 0,95 13 bis bis bis 165 1,05 15 Water (litres) • • • • • 2x Energy (kWh) Heavy soil Drying Crockery, cutlery, pots and pans Final rinse INTENSIV 70° Intermediate Type of load Main wash Programme Pre-rinse Degree of soil Duration (minutes) Consumption values3 Cycle description 9 (1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). Characterised by a short duration. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (2) Testing programme for EN 50242 (see "Hints for Test Centres). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been extended. (3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. "AUTOMATIC" washing programme During the "AUTOMATIC" washing programme the amount of soil on the dishes is determined by how cloudy the water is. If the appliance is partially loaded and the dishes lightly soiled, the "prewash"", main wash", and "rinse" phases of the programme are shorter and the water consumption level is lower. If the appliance is fully loaded and the dishes heavily soiled, the "prewash"", main wash", and "rinse" phases of the programme are longer and the water consumption level is higher. For this reason the programme duration, water and energy consumption levels can vary within the stated range for AUTOMATIC programme (see "Washing programmes chart"). During the "AUTOMATIC" programme the temperature of the main wash water is also automatically adjusted between 50°C and 65°C depending on the amount of soil on the dishes. 25 152960 73/0en 4-10-2004 17:07 Pagina 26 Operating instructions Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Close the dishwasher door 4. Press the On/Off button The On/Off indicator light illuminates. 5. Setting and starting the programme To select a programme, press the button of the programme you wish to select, the indicator light of the button illuminates and in the digital display will appear, flashing, the running time of the programme that has been set (in minutes). The phase indicator lights foreseen for that programme will illuminate. After about 3 seconds from the last pressure of a button the programme starts automatically. In the digital display the running time of the programme is no longer flashing and the indicator lights of the phases will turn off except for the phase underway. Setting and starting the programme with the delay start The setting of the delay start occurs before selecting the programme Press the delay start button until the flashing number of the hours for the delay start will appear in the digital display (from 1h to 19h). Select a washing programme. In the digital display will appear, for a moment, the running time of the programme and then again appears the selected delay start time. As soon as the number of hours is displayed without flashing, the countdown for the delay start is active. The countdown will decrease with steps of 1 hour. The opening of the door during the countdown will not modify the delay start. 26 152960 73/0en 4-10-2004 17:07 Pagina 27 Operating instructions Once the delay start has elapsed the programme will start automatically. Note: it is possible to select a washing programme and the delay start also with the door slightly opened. In this case the start of the programme or of the countdown for the delay start will start automatically after the closure of the door. Until this moment it is possible to change or modify the setting made. a) Press the On/Off button. b) Select a washing programme and if required the delay start. c) Close the door. 6. To interrupt or cancel a washing programme in progress Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary Attention! Hot steam may escape when the door is opened. Open the door carefully. To interrupt a washing programme a) Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. b) Press the On/Off button, in this case all the indicator lights turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted. To cancel a washing programme To cancel a washing programme you have to reset the dishwasher; press simultaneously the function buttons 2 and 3 for about 2 seconds, the indicator light of the running programme starts flashing for about 2 seconds. After about 2 seconds all the indicator lights will turn off (except for the On/Off indicator light and eventually the rinse aid and salt indicator lights) indicating that the running programme has been cancelled. If a new washing programme will be selected, check that there is detergent in the detergent dispenser. 27 152960 73/0en 4-10-2004 17:07 Pagina 28 Operating instructions 7. To cancel a "delay start" To cancel a delay start you have to reset the dishwasher; follow the same instructions given in "To cancel a washing programme". Cancelling a delay start involves also the cancelling of the set washing programme. In this case you have to set the washing programme again. 8. End of the washing programme The dishwasher will automatically stop. The end of programme indicator light is illuminated. In the digital display appears 0 (remaining programme time), only in this case the programme has ended. Switch off the dishwasher by pressing the On/Off button. Hot steam may escape from the appliance when opening the door immediately after the end of the programme, therefore, open the door carefully. Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. 9. Unloading the dishwasher Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler then the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 28 152960 73/0en 4-10-2004 17:07 Pagina 29 Operating instructions "3 in 1" function This function can be selected together with all programmes. Place the "3 in 1" combi detergent tablet in the detergent dispenser. Close the dishwasher’s door and press the "On/Off" button, the On/Off indicator light illuminates. Press the "3 in 1" function button, the correspondent indicator light illuminates. Remember that if this function is selected, it will remain active also for the following programmes, until it will be deactivated by pressing the "3 in 1" function button (indicator light off). Select the required washing programme, after about 3 seconds the programme will start automatically. Once the programme is running, the "3 in 1" function can NO longer be changed. If you want to exclude the "3 in 1" function you have to cancel the programme setting (see "To cancel a washing programme in progress") and then deactivate the "3 in 1" function by pressing the "3 in 1" button. In this case you have to set a washing programme again. With the use of "3 in 1" combi detergent tablets, the cycle durations given in the "Washing programmes" chart may change. 29 152960 73/0en 4-10-2004 17:07 Pagina 30 Operating instructions Maintenance and cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°C wash programme without dishes using detergent. Cleaning the filters The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result. 1. Open the door, remove the lower basket. 2. The dishwasher filter system comprises a coarse filter (A), a microfilter (B) and a flat filter (C). Unlock the filter system using the handle on the microfilter, and remove. 3. Turn the handle about 1/4 a turn anticlockwise and remove. MA36 30 152960 73/0en 4-10-2004 17:07 Pagina 31 Operating instructions 4. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). 5. Clean all filters thoroughly under running water. 6. Remove the flat filter (C) from the base of the washing compartment and clean both faces thoroughly. 7. Put the flat filter (C) back in the base of the washing compartment. 8. Place the coarse filter (A) in the microfilter (B) and press together. 9. Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment. Attention! Under no circumstances may the dishwasher be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. NEVER try to remove the upper spray arm. If residues of soil have clogged the holes in the upper spray arm, remove them with a toothpick. MA40 31 152960 73/0en 4-10-2004 17:07 Pagina 32 Operating instructions Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: 1. Unplug the appliance and then turn off the water. 2. Leave the door ajar to prevent the formation of any unpleasant smells. 3. Leave the inside of the machine clean. Frost precautions Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it. Moving the machine If you have to move the machine (moving house etc....): 1. Unplug it. 2. Turn the water tap off. 3. Remove the water inlet and discharge hoses. 4. Pull the machine out together with the hoses. Avoid over tilting the machine during transportation. 32 152960 73/0en 4-10-2004 17:07 Pagina 33 Operating instructions What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...a flashing fault code appears The intervention of an alarm is indicated by: - indicator light of the programme in progress is flashing - a fault code visible in the digital display. Open the door and carry out the following suggested corrective actions (see following chart). Fault code / Malfunction - Indicator light of the programme in progress is flashing - in the digital display appears The machine does not fill with water - Indicator light of the programme in progress is flashing - in the digital display appears Possible cause Solutions The water tap is blocked or furred with limescale. Clean the water tap. The water tap is turned off. Turn the water tap on. The filter (where present) in the threaded hose fitting at the water inlet valve is blocked. Clean the filter in the threaded hose fitting. The water inlet hose has not been correctly laid or it is bent or squashed. Check the water inlet hose connection. The siphon is blocked. Clean out the siphon. The water drain hose has not been correctly laid or it is bent or squashed. Check the water drain hose connection. The dishwasher will not drain - Indicator light of the programme in progress is flashing Protection against flooding is active. Close the water tap and contact the Service Force Centre. - in the digital display appears Once the checks have been carried out, to continue the programme, close the door and press the button of the programme that was running before the intervention of the alarm. The programme will continue from the point in which it was interrupted. If the fault code reappears contact your local Service Force Centre. For other fault codes not described in the above chart will appear, please contact your Service Force Centre. 33 152960 73/0en 4-10-2004 17:07 Pagina 34 Operating instructions ...there are problems when operating the dishwasher Fault The programme does not start There is a whistling noise during washing 34 Possible cause Solutions The dishwasher door has not been properly closed. Close the door. The main plug is not plugged in. Insert the mains plug. The fuse has blown in the household fuse box. Replace the fuse. For dishwasher models with delay start option: Delay start has been selected. If dishes are to be washed immediately, cancel the delay start. The whistling is not a cause for concern. Use a different brand of detergent. 152960 73/0en 4-10-2004 17:07 Pagina 35 Operating instructions ...the wash results are not satisfactory The dishes are not clean ● ● ● ● ● ● ● ● The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used. Where there are limescale deposits on the dishes; the salt container is empty or the wrong level of the water softener has been selected. The drain hose connection is not correct. The salt container cap is not properly closed. The dishes are wet and dull ● ● Rinse aid was not used. The rinse aid dispenser is empty. There are streaks, milky spots or a bluish coating on glasses and dishes ● Decrease rinse aid dosing. Water drops have dried onto glasses and dishes ● ● Increase rinse aid dosing. The detergent may be the cause. Contact the detergent manufacturer’s consumer care line. 35 152960 73/0en 4-10-2004 17:07 Pagina 36 Service Service If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.). This information can be found on the rating plate located on the side of the dishwasher door (see picture). RA07 Mod. . Prod.N ....... o. ....... . Ser. No. ....... .. So that you always have these numbers at hand, we recommend you to make a note of them here: Mod. :. . . . . . . . . . . . . . . . . . . . . . . . . PNC : . . . . . . . . . . . . . . . . . . . . . . . . . S.N. :. . . . . . . . . . . . . . . . . . . . . . . . . . Service and spare parts This product should be serviced by an authorised service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts. 36 152960 73/0en 4-10-2004 17:07 Pagina 37 Operating instructions Technical specifications Dimensions: Width Height with worktop Height without worktop Max depth Max depth with open door Electrical connection: Voltage Overall power Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher’s door. Water supply pressure: Minimum Maximum Capacity: 60 cm 85 cm 82 cm 61 cm 118.5 cm 50 kPa (0.5 bar) 800 kPa (8 bar) 12 place settings This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications. 37 152960 73/0en 4-10-2004 17:07 Pagina 38 Installation instructions Installation instructions Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture. Proceed as follows: 570 - 600 820 Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop. 600 Insert the machine after adjusting height and levelling with the adjustable feet. IN05 When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged. Be sure that once the appliance has been installed, it is easily accessible for the consumer service department. If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted. The plinth on free-standing appliances is not adjustable. Levelling Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level. 38 152960 73/0en 4-10-2004 17:07 Pagina 39 Installation instructions Water supply connections This dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout or to a purpose made quick-coupling tap such as the Press-block. The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area. The water inlet hose must not be kinked, crushed, or entangled when it is being connected up. The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible). If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Do not use, for connection, old hoses which have been used in another appliance. The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations. 39 152960 73/0en 4-10-2004 17:07 Pagina 40 Installation instructions Water inlet hose with safety valve After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water. Please take care when installing the water inlet hose: - The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water. - If water inlet hose or the safety valve is damaged, remove the mains plug immediately. - A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. - Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve. 40 152960 73/0en 4-10-2004 17:07 Pagina 41 Installation instructions Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine). 3. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. CS18 Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. Attention! Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it. 41 152960 73/0en 4-10-2004 17:07 Pagina 42 Installation instructions Electrical connection Information concerning the electrical connection is given on the rating plate on the edge of the dishwasher’s door. Before plugging the appliance into the wall socket, make sure that: 1. The mains voltage and current rating at the site of installation match the nominal voltage and current rating given on the rating plate. 2. The meter, fuses, mains power supply and wall socket can all take the maximum load required. Make sure that the socket and plug are compatible without having to use any type of adaptor. If necessary, have the domestic wiring system socket replaced. To isolate the dishwasher from mains, remove the mains plug. Important! The plug must still be accessible after the appliance has been installed. In case that the electrical cable has to be replaced, please contact your local Service Force Centre. The appliance should not be connected to the electrical supply by means of an extension cable. Safety standards require the appliance to be earthed. The manufacture accepts no liability for failure to observe the above safety precautions. 42 152960 73/0en 4-10-2004 17:08 Pagina 43 Hints for test centres Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Testing in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart). Load: 12 standard place settings Rinse aid setting Position 4 (type III) Detergent dosage: 5 g + 25 g (type B) Arrangement upper basket Arrangement lower basket Arrangement knife basket Cup racks: position A Arrangement cutlery basket 43 152960 73/0en 4-10-2004 17:08 Pagina 44 From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG 152 960 73/0 Subject to change without notice 10/04 ">

Public link updated
The public link to your chat has been updated.
Advertisement