ZANUSSI ZDI6896QX Instruction book

Add to my manuals
24 Pages

advertisement

ZANUSSI ZDI6896QX Instruction book | Manualzz
DISHWASHER
ZDI 6896 QX
152962 37/0
INSTRUCTION BOOK
UK
Contents
Safety instructions
3
Disposal
3
Economical and ecological dishwashing
3
Description of the appliance
4
The control panel
First use
4
6
Prior to using for the first time
The water softener
Filling with dishwasher salt
Rinse aid
7
7
8
9
In daily use
Loading cutlery and dishes
The lower basket
The cutlery basket
The upper basket
Adjusting the height of the upper basket
Use of detergent
10
10
10
11
11
12
12
Different kinds of detergent
13
Washing programmes
14
Starting a washing programme
15
Maintenance and cleaning
Cleaning the filters
Prolonged periods of non-operation
Frost precautions
Moving the machine
16
16
16
16
16
What to do, when...
17
Service and Spare Parts
19
Customer Care Department
19
Guarantee Conditions
20
Installation instructions
Building-in
Levelling
Fixing to adjacent units
Water supply connections
Water outlet hose connection
Electrical connection
21
21
21
21
21
22
22
Hints for test centres
23
Technical specifications
Dimensions
Width
Height
Max depth
Max depth with open door
Electrical connection:
Voltage
Overall power
Fuse
Information on the electrical connection is given on the rating plate on the
inner edge of the dishwasher’s door.
Water supply pressure
Minimum
Maximum
Capacity
59.6 cm
81.8 - 87.8 cm
57.5 cm
114 cm
50 kPa (0.5 bar)
800 kPa (8 bar)
12 place settings
This appliance complies with the following E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
2
Safety instructions
It is most important that this instruction book should be retained with the appliance for future reference. Should the
appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that
the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the
relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the
appliance.
Installation
●
Check your dishwasher for any transport damage. Never
connect a damaged machine. If your dishwasher is
damaged, you should contact your supplier.
●
For safety reasons it is dangerous to alter the specifications
or attempt to modify this product in any way.
●
Any electrical and plumbing work required to install this
appliance should be carried out by a qualified and
competent person.
●
Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
●
The sides of the dishwasher must never be drilled to
prevent damage to hydraulic components.
Disposal
Dispose of the dishwasher packaging material correctly.
All packaging materials can be recycled.
Plastic parts are marked with standard international
abbreviations:
>PE<
for polyethylene, e.g. sheet wrapping material.
>PS<
for polystyrene, e.g. padding material (always CFCfree).
>POM< for polyoxymethylene, e.g. plastic clips.
Cardboard packaging is manufactured from recycled paper
and should be deposited in the waste paper collection for
recycling.
As and when you cease to use your dishwasher and withdraw
it from service, your should render it unserviceable before
having it disposed of.
Child safety
●
This appliance is designed to be operated by adults.
●
Children should not be allowed to tamper with the controls
or play with the product.
Warning! Children at play could lock themselves in your
dishwasher or otherwise endanger their lives. Therefore cut off
the power supply cable and make the door closing device
unusable to prevent children from being trapped inside.
●
Packaging parts may be dangerous for children, who could
even be suffocated! You should therefore keep all
packaging well away from children.
For the disposing of the appliance please take it to a recycling
centre or to your dealer who may, for a small contribution to
the costs, dispose it for you.
●
The water in your dishwasher is not for drinking. Detergent
residues may still be present in your machine. Keep
children well away from your dishwasher when the door is
open.
●
Economical and
ecological dishwashing
Keep all detergents in a safe place out of children's reach.
Your dishwasher in day-to-day use
●
Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be
washed in this dishwasher.
●
Under no circumstances should you open the door whilst
the appliance is in operation, especially during the washing
phase, hot water may escape. However, if the door is
opened, a safety device ensures that the machine stops.
●
Only use products (detergent, salt and rinse aid) specifically
designed for use in dishwashers.
●
Long bladed knives stored in an upright position are a
potential hazard.
●
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
●
When finishing loading or unloading close the door, as an
open door can be a hazard.
●
Do not sit or stand on the open door.
●
Isolate the appliance from the power supply and turn off the
water supply after use.
●
This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
●
Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning.
Contact your local Service Force Centre. Always insist on
genuine spare parts.
3
●
Ensure that the water softener is correctly adjusted.
●
Do not pre-wash under running water.
●
Select the wash programme to suit the nature and degree of
the soiling on the dishes.
●
Do not use more detergent, dishwasher salt and rinse aid
than is recommended in these operating instructions and by
the manufacturer of the respective product.
Description of the appliance
1.
Upper basket stop
2.
Water hardness switch
3.
Salt container
4.
Detergent dispenser
5.
Control panel
6.
Rating plate
7.
Rinse aid dispenser
8.
Filters
9.
Lower spray arm
10. Upper spray arm
11. Upper basket
IN153
The control panel
Display
On/Off button
Confirm/start button
Programme selection button
Cancel button
Delay start button
Option selection button
Programme selection button: press this button until is
Delay start selection button: allows the start of the
displayed the desired washing programme (see "Washing
programmes" chart for the selection of the programme).
washing programme to be delayed from 1 hour up to 19 hours.
To activate this function:
Confirm/start button: is necessary for:
- press this button until in the display are visualised the
number of hours desired and the corresponding symbol,
- the confirm / memorise any option,
- press the confirm/start button.
- start a washing programme.
4
Cancel button: This function allows to:
Option selection button: allows you to enter a menu of
- cancel a washing programme in progress,
options with relative submenu.
- cancel the setting of an option.
How to set the several options:
1. Press more times the option selection button, until the
desired option is displayed.
It is also possible to return to the factory setting for the
following options:
2. To modify the current setting of the option press the
confirm/start button.
LANGUAGE (factory setting: english).
BRIGHTNESS (factory setting: level 10).
3. Press more times the option selection button until the
selection of the desired submenu is displayed.
CONTRAST (factory setting: level 6).
In setting mode press for about 6 seconds this button, in the
display will appear LANGUAGE ENGLISH.
4. Press again the confirm/start button: the option is
memorised. Automatically the dishwasher will return to
setting mode or to the washing programme previously
selected.
The options can be set only before the start of a washing
programme.
Once set, these options will remain activated also for the
following cycles, until they will be deactivated.
MENU
DETERGENT
SUBMENU
Sets the dishwasher for the use of conventional, concentrated detergents or combi detergents
(3in1).
- DETERGENT 3-IN-1
function activated; allows the use of the 3in1 combi detergents,which incorporate detergent,
rinse aid and salt functions.
will appear in the display.
With the activation of this function, the rinse aid dispenser and salt container are automatically
deactivated and consequently also the display indications for the refilling of salt and rinse aid
are deactivated.
- DETERGENT REGULAR
- for conventional, alkaline detergents with caustic components,
- for low alkaline concentrated detergents with natural enzymes.
RINSE AID
Allows you to deactivate or activate the dosage of rinse aid:
- YES rinse aid dosage activated,
- NO rinse aid dosage deactivated.
ECO DRY
Allows you to shorten the drying phase to only 15 minutes. It is not available with all washing
programmes (see "Washing programmes" chart)
- YES option activated, in the display appears the symbol
- NO option deactivated.
EXTRA RINSE
Allows you to add another rinse phase to the washing programme. It is not available with all
washing programmes (see "Washing programmes" chart).
- YES option activated, in the display appears the symbol
- NO option deactivated.
WATER HARDNESS
Allows you to set electronically the water softener according to the hardness of the local area
water: water hardness is measured in 10 levels.
LANGUAGE ENGLISH
Allows you to view messages that appear in the display in the required language.
(Factory setting: english).
SOUND VOLUME
Allows you to adjust the volume of the alarm signals and of the end of programme signal (from 0
to 5).
Level 0 means the deactivation of the volume of all signals and the symbol
display.
appears in the
BRIGHTNESS
Allows you to increase or decrease the brightness of the background of the display, 10 different
levels can be selected.
CONTRAST
Allows you to increase or decrease the contrast between the background and the visualised
messages in the display, 10 different levels can be selected.
5
Symbols: indicate the various options.
In this row several details are displayed:
- setting mode, guide to the selection of the washing programmes, duration time of the
programme, options, (when together with the washing programme one or more options
are set, the update of the programme duration will occur automatically).
- Once the programme has started, indicates the sequence of the running phases and
the running time of the programme in progress.
Washing phases: during the progress of the programme these little bars indicate the
phases of the washing programme: prewash, main wash, rinses, drying.
The symbols have the following meaning:
Delay start: fixed in setting mode; flashing when in progress.
Extra rinse option: is illuminated when this option is active.
3 in 1 detergent option: is illuminated when the function for the use of 3 in 1 combi detergents is active.
Eco dry option: is illuminated when this option is active.
Exclusion of the volume for alarm and end of programme audible signals.
First use
The first time the dishwasher is switched on, it is possible to
select a different language in which the machine will visualise
the messages on the display.
The factory setting is in english therefore the message
LANGUAGE ENGLISH will appear in the display; the word
ENGLISH flashes.
Press the option selection button until the language required
appears in the display.
To confirm the selection press the confirm/start button.
if, instead of a different language, the confirm/start button or
the cancel button are pressed, the dishwasher will memorise
the display of the messages in english.
It will be always possible to select another language another
time, simply follow the instructions given for the setting of the
options (see: "Option selection button").
6
Prior to using for the first time
Before using your dishwasher for the first time:
a) Setting manually
1. Ensure that the electrical and water connections comply
with the installation instructions
1. Open the dishwasher’s door.
2. Remove all packaging from inside the appliance
3. Turn the water hardness switch to position 1 or 2 (see
table).
2. Remove the lower basket from the dishwasher.
3. Set the water softener
4. Replace the lower basket.
4. Pour 1 litre of water inside the salt container and then fill
with dishwasher salt
The dishwasher is factory set
at position 2.
5. Fill the rinse aid dispenser
The water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these minerals and salts, the harder
your water is.
Water hardness is measured in equivalent scales, Clarke
degrees, French degrees and mmol/l (millimol per litre).
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
AA07
b) Setting electronically
The water softener must be set in both ways: manually, using
the water hardness switch and electronically, using the option
selection push button: option WATER HARDNESS.
Follow the instructions given in the paragraph "The control
panel", how to set the various options.
Press more times the option selection button until WATER
HARDNESS is displayed; with the help of the below chart, set
the level corresponding to hardness of the water in your area.
The dishwasher is factory set al level 5.
Adjusting the
water hardness
setting
Water hardness
Range
Level
indicated in
the digital
display
Use
of
salt
Clarke
°TH
mmol/l
(degrees)
(french degrees)
(millimol per litre,
international unit for
the hardness of water)
manually
electronically
64 - 88
91 - 125
9,0 - 12,5
IV
2
level 10
10
yes
53 - 63
76 - 90
7,6 - 8,9
IV
2
level 9
9
yes
46 - 52
65 - 75
6,5 - 7,5
IV
2
level 8
8
yes
36 - 45
51 - 64
5,1 - 6,4
IV
2
level 7
7
yes
28 - 35
40 - 50
4,0 - 5,0
IV
2
level 6
6
yes
23 - 27
33 - 39
3,3 - 3,9
III
2
level 5
5
yes
18 - 22
26 - 32
2,6 - 3,2
III
1
level 4
4
yes
13 - 17
19 - 25
1,9 - 2,5
II
1
level 3
3
yes
5 - 12
7 - 18
0,7 - 1,8
I/II
1
level 2
2
yes
<5
<7
< 0,7
I
1
level 1
1
no
7
Filling with dishwasher salt
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed for use in
a dishwasher, especially table salt, will damage the water
softener.
Only fill with salt just before starting one of the complete
washing programmes.
This will prevent any grains of salt or salty water, which
may have been spilt, remaining on the bottom of the
machine for any period of time, which may cause
corrosion.
To fill:
1. Open the door, remove the lower basket and unscrew the
cap of the salt container by turning it anticlockwise.
2. Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
3. Using the funnel provided,
pour in the salt until the
container is full.
LE
SA UT
ZO LT
SA LZ
SA L
SE
4. Replace the cap making
sure that there is no trace
of salt on the screw
thread or on the gasket.
5. Screw on the cap tightly
turning it clockwise until it
stops with a click.
SR14
The salt container will require topping up periodically.
The salt refilling is indicated by a flashing message in the
display REFILL SALT.
This occurs only during the setting mode and at the end of the
washing programme, during the progress of the washing
programme the indication for salt refilling is not active.
The salt refilling indication can remain active from 2 to 6
hours after the salt has been replenished, assuming the
dishwasher remains switched on. If you are using salts
that take longer to dissolve then this can take longer. The
function of the machine is not affected.
Do not worry if water over flows from the unit when filling with
salt, this is quite normal.
8
Rinse aid
●
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, and spot and streak free drying.
The dispenser, which is positioned inside the door, holds about
110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing
programmes, depending upon the dosage setting.
If you are using dishwasher detergent that already contains
rinse aid, the detergent including the rinse aid must be
placed in the detergent compartment. In this case the
rinse aid dispenser must be deactivated in order to avoid a
double dosage.
Deactivation/activation of the rinse aid
dispenser
Filling with rinse aid
Factory setting: rinse aid dispenser activated.
1. Open the container by pressing the release button (A).
Follow the instructions given in the paragraph "The control
panel", how to set the various options.
2. Add the rinse aid until the container is completely full. The
maximum level for filling is indicated by "max".
Press more times the option selection button until the
message RINSE AID is displayed; to deactivate the dosage
select NO.
Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foaming during the next
wash.
Only use branded rinse aid for dishwashers. Never fill the
rinse aid dispenser with any other substances (e.g.
dishwasher cleaning agent, liquid detergent). This would
damage the appliance.
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (position
1 minimum dosage, position 6 maximum dosage).
The dose is factory set in
position 4.
Increase the dose if there are
drops of water or lime spots
on the dishes after washing.
Reduce it if there are sticky
whitish streaks on the dishes
or a bluish film on glassware
or knife blades.
Top up the rinse aid when REFILL RINSE AID appears in the
display.
This occurs only during the setting mode and at the end of the
washing programme, during the progress of the washing
programme the indication for rinse aid refilling is not active.
9
In daily use
●
Check if it’s necessary to refill with dishwasher salt or rinse
aid
●
Load cutlery and dishes into the dishwasher.
●
Fill with dishwasher detergent .
●
Select a wash programme suitable for the cutlery and
dishes.
●
Start the wash programme.
Loading cutlery and dishes
Sponges, household cloths and any object that can
absorb water may not be washed in the dishwasher.
●
Before loading the dishes, you should:
- Remove large left-overs.
- Soften remnants of burnt food in pans
●
When loading the dishes and cutlery, please note:
- Dishes and cutlery must not impede the rotation of the
spray arms .
- Load hollow items such as cups, glasses, pans, etc. with
the opening downwards so that water cannot collect in the
container or a deep base.
- Dishes and items of cutlery must not lie inside one
another, or cover each other.
- To avoid damage to glasses, they must not touch.
- Lay small objects in the cutlery basket.
●
Plastic items and pans with teflon have a tendency to
retain water drops; these items will not dry as well as
porcelain and steel items.
For washing in the dishwasher the following cutlery/dishes
are of limited suitability:
are not suitable:
- Cutlery with wooden, horn, china or
mother-of-pearl handles
- Only wash stoneware in the dishwasher if it is specifically
marked as being dishwasher-safe by the manufacturer.
- Plastic items that are not heat resistant
- Glazed patterns may fade if machine washed frequently
- Older cutlery with glued parts that is not
temperature resistant
- Silver and aluminium parts have a tendency to discolour
during washing. Residues, e.g. egg white, egg yolk and
mustard often cause discolouring and staining on silver.
Therefore always clean left-overs from silver immediately, if
it is not to be washed straight after use.
- Bonded cutlery items or dishes
- Pewter or copper items
- Lead crystal glass
- Some types of glass can become dull after a large number
of washes
- Steel items subject to rusting
- Wooden platters
- Items made from synthetic fibres
The rows of prongs on the lower basket can be easily lowered
to allow you to load pots, pans and bowls.
Open the door and slide out the baskets to load the dishes.
The lower basket
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the spray arms can turn
freely.
UI88
UI94
UI96
10
The cutlery basket
The upper basket
Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up
to 24 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and
underneath the cup racks so
that water can reach all
surfaces.
Glasses with long stems can
be placed upside down in the
cup racks.
US47
For taller items, the cup racks
can be folded upwards.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
Removable knife basket
Long and/or sharp items of cutlery such as carving knives must
be placed horizontally in the removable knife basket, which is
positioned at the rear of the upper basket.
UI53
Forks and spoons should be placed in the removable cutlery
basket with the handles facing downwards and the knives with
their handles facing upwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
US73
Mix spoons with other cutlery to prevent them from sticking
together.
In case that plates are loaded in the upper
basket:
For best results we
recommend you to use the
cutlery grids provided (if the
size and dimensions of the
cutlery allow it).
The cutlery basket is in two
parts which can be
separated to give greater
loading flexibility. To separate
the two parts, slide them
horizontally in opposite
directions and pull them
apart. To reassemble,
reverse the procedure.
load them starting from the
rear positions of the
basket; tilting them slightly
forwards and avoiding the
front positions near the
door.
US71
UI63
Before closing the door, ensure that the spray arms can
rotate freely.
UI62
11
Adjusting the height of the upper basket
Use of detergent
If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position.
Only use detergents specifically designed for use in
dishwashers.
We recommend the use of Finish detergents.
Maximum height of the dishes in
upper basket
lower basket
With upper basket raised
20 cm
31 cm
With upper basket lowered
24 cm
27 cm
Using no more then the correct amount of detergent
contributes to reducing pollution.
Please observe the manufacturer’s dosing and storage
recommendations as stated on the detergent packaging.
To move to the higher position proceed as
follows:
Fill with detergent
1. If the lid is closed: press release button (1). The lid springs
open.
1. Pull out the basket until it stops.
2. Fill the detergent dispenser (2) with detergent.
The marking indicates the dosing levels:
20 = approximately 20 g of detergent
30 = approximately 30 g of detergent
2. Carefully lift both sides upwards until the mechanism is
engaged and the basket is stable.
Attention!
Never lift or lower the
basket on one side only
When the basket is in the
higher position you will not
be able to use the cup
rack(s).
RC08
DE19
To lower the basket to the original position
proceed as follows:
DE22
3. All programmes with prewash need an additional detergent
dose (5/10 g) that must be placed in the prewash detergent
chamber (3). This detergent will take effect during the
prewash phase.
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and then allow the
mechanism to drop back down slowly, keeping hold of it.
4. Close the lid and press until it locks in place.
After loading your machine always close the door, as an
open door can be a hazard.
12
Different kinds of detergent
Detergent tablets
Use of "3 in 1" combi detergents
Detergent tablets of different brands dissolve at different
speeds. For this reason some detergent tablets cannot
dissolve and develop their full cleaning power during short
programmes. Therefore please use long programmes when
using detergent tablets, to ensure the complete removal of
detergent residuals.
Do not place the tablets in the tub or in the cutlery basket
as this will result in poorer wash results. The tablets
should be placed in the detergent dispenser.
General advice
These products are detergents with integrated and combined
detergent/rinse-aid and salt functions.
1. Before using these products you should first check that the
water hardness in your supply is compatible with the use of
these products as per the detergent manufacturers (on the
product packaging).
2. These products should be strictly used according to the
detergent manufacturers instructions.
3. If you encounter problems when using 3 in 1 products for
the first time then please contact the detergent
manufacturers care line (the telephone number is given on
the product packaging).
Concentrated detergent
Based on their chemical composition, dishwasher detergents
can be split into two basic types:
- conventional, alkaline detergents with caustic components.
- low alkaline concentrated detergents with natural enzymes.
The use of 50°C washing programmes in conjunction with
concentrated detergents reduces pollution and is good for your
dishes; these wash programmes are specially matched to the
dirt-dissolving properties of the enzymes in the concentrated
detergent. For this reason 50°C wash programmes in which
concentrated detergents are used can achieve the same
results that can otherwise only be achieved using 65°C
programmes.
Special advice
When using combination 3 in 1 products select the "3 in 1"
function.
If you decide to turn back to the use of the standard detergent
system we advise that you:
Combi detergents
●
Refill both the salt container and rinse aid dispenser.
●
Switch the water hardness setting to the highest possible
position and run from 1 to 3 normal washing programmes
without a load.
●
Readjust the water hardness setting again according to the
hardness of the water in your area.
If you are using dishwasher detergent that includes the rinse
aid function, this must be placed in the detergent compartment.
In this case the rinse aid dispenser must be deactivated, in
order to avoid a double dosage.
For best results we recommend the use of Finish detergents, rinse aid and salt.
EASY
POURING
PACK
N EW
TION
DOUBLE AC
FOR A
BRILLIANT
RILLIANT
SHINE
L I Q U I D
G E L
P O W D E R
RINSE
C O N C E N T R AT E D D I S H WA S H E R D E T E R G E N T
DE15
13
Washing programmes
Programme
Automatic
(1) 60° Quick
70° Intensive
Degree of soil
and
type of load
Options available
with the
programme
Cycle description
Water
consumption
(in litres)
1,1 - 1,5
12 - 25
ECO DRY
EXTRA RINSE
Cold prewash
Main wash up to 65° or 50°C
1 or 2 cold rinses
1 hot rinse
Drying
Fresh soil.
Crockery and cutlery
EXTRA RINSE
Main wash up to 60°C
1 hot rinse
0,8
9
EXTRA RINSE
Hot prewash
Main wash up to 70°C
2 warm rinses
1 hot rinse
Drying
1,7 - 1,9
23 - 25
0,95 - 1,05
13 - 15
0,8 - 0,9
14 - 16
Heavy soil.
Crockery, cutlery, pots
and pans
(2) 50° Eco
Normal soil.
Crockery and cutlery
ECO DRY
EXTRA RINSE
45° Glass
Normal soil.
Delicate china, delicate
crockery and glassware
ECO DRY
EXTRA RINSE
Main wash up to 45°C
1 warm rinse
1 hot rinse
Drying
Prewash
Energy
consumption
(in kWh)
Normal / light soil.
Crockery, cutlery, pots
and pans
Cold prewash
Main wash up to 50°C
1 cold rinse
1 hot rinse
Drying
Plate warmer
(3) Consumption values
This is a programme both
designed to heat plates
before serving or remove
dust from dishes which
have not been used for a
long time.
1 hot rinse
0,7
5
Any.
Partial load (to be
completed later in the
day).
1 cold rinse (to avoid food
scraps from sticking
together). This programme
does not require the use of
detergent.
0,1
4
(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the
needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
(2) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes,
allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the
65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been
extended.
(3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the
variations of the power supply.
The programme duration is visible in the display when the setting of the programme occurs. The setting of the various options may
modify the duration of the programme that will be automatically updated in the display.
"Automatic" washing programme
During the "Automatic" washing programme the amount of soil on the dishes is determined by how cloudy the water is.
If the appliance is partially loaded and the dishes lightly soiled, the "prewash", "main wash", and "rinse" phases of the programme are
shorter and the water consumption level is lower.
If the appliance is fully loaded and the dishes heavily soiled, the "prewash", "main wash", and "rinse" phases of the programme are longer
and the water consumption level is higher.
During the "Automatic" programme the temperature of the main wash water is also automatically adjusted between 50°C and 65°C
depending on the amount of soil on the dishes.
14
Starting a washing programme
1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
8. To cancel a wash programme in
progress
Press cancel button.
The message CONFIRM CANCEL? appears in the
display.
Press the confirm/start button.
The dishwasher returns to setting mode and in the display
will appear the message CHOOSE PROGRAMME.
(If a new washing programme will be selected, check that
there is detergent in the detergent dispenser).
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off button
Attention! Hot steam may escape when the door is
opened. Open the door carefully.
5. Setting and starting the programme
9. End of washing programme
a) Press the programme selection button until the
name of the desired programme is displayed (see
"Washing programmes" chart for the selection of the
washing programme). The details concerning the set
programme (programme name, duration, etc...) are
displayed.
Select options and/or "delay start", if required.
Press the confirm/start button, the set programme will
start automatically.
If refilling with salt and/or rinse aid has been postponed
or if the salt has not yet dissolved completely, in the
display will appear salt and rinse aid refilling
messages.
In this case it is necessary to press the confirm/start
button twice to start the wash programme.
The dishwasher will automatically stop and an audible
signal informs you of the end of the washing programme.
If the door is not immediately opened at the end of the
programme, air will circulate inside the dishwasher to
prevent residual steam recondensing on the dishes as
water droplets.
This device operates intermittently for about 20
minutes, as long as the dishwasher is switched on.
If the On/Off button is pressed or the door is opened
during these 20 minutes, the device will be automatically
cancelled.
The message PROGRAMME END alternated with
PLEASE SWITCH OFF is displayed.
In case refilling with salt and/or rinse aid is necessary, the
message PLEASE SWITCH OFF is replaced with the salt
and rinse aid refilling messages. If refilling is postponed, it
is possible, however, to switch off the appliance.
b) If "delay start" has been set, the countdown will start
automatically and will decrease with steps of 1 hour.
Only in the last hour the decrease will occur from
minute to minute.
Switch off the dishwasher by pressing the On/Off button.
In the display is visualised the hours before the start of
the wash programme and the delay start symbol is
flashing.
Open the door and wait a few minutes before removing
the dishes: in this way they will be cooler and the drying
will be improved.
Opening the door will not modify or interrupt the
countdown. Once the delay start has elapsed the
programme will start automatically.
10. Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should
therefore be allowed to cool down before removing from
the appliance.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
Water may appear on the sides and the door of the
dishwasher as the stainless steel will eventually become
cooler than the dishes.
6. To interrupt a wash programme in
progress
Interrupt a wash programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape when the door is
opened. Open the door carefully.
a) Open the dishwasher’s door; the programme will stop.
The message PLEASE CLOSE DOOR is displayed.
Close the door; the programme will start from the point
in which it was interrupted.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
b) Press the On/Off push button, in this case all the
indicator lights turn off. Press the On/Off push button
again; the programme will start from the point in which
it was interrupted.
7. To cancel a delay start in progress
Press cancel button.
The message CONFIRM CANCEL? appears in the
display.
Press the confirm/start button.
The wash programme will start automatically.
15
Maintenance and cleaning
Clean the external surfaces of the machine and control panel
with a damp soft cloth. If necessary use only neutral
detergents. Never use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....).
Ensure that the seals around the door, the detergent and rinse
aid dispensers are cleaned regularly with a damp cloth.
We recommend the use of Finish Dishwasher Cleaner every
3 months or run a 65°C wash programme without dishes using
detergent.
Regular use of Finish Dishwasher Cleaner cleans
inaccessible parts, eliminates unpleasant food odours and
helps prevent the build-up of limescale.
Attention!
Under no circumstances may the dishwasher be used without
filters.
Incorrect repositioning and fitting of the filters will produce
poor washing results.
NEVER try to remove the
upper spray arm.
If residues of soil have
clogged the holes in the
upper spray arm, remove
them with a toothpick.
Cleaning the filters
The filters must be checked and cleaned from time to time.
Dirty filters will degrade the washing result.
MA40
1. Open the door, remove the lower basket.
2. The dishwasher filter system comprises a coarse filter (A),
a microfilter (B) and a flat filter (C).
Unlock the filter system using the handle on the microfilter,
and remove.
Prolonged periods of non-operation
If you are not using the machine for any period of time you are
advised to:
1. Unplug the appliance and then turn off the water.
2. Leave the door ajar to prevent the formation of any
unpleasant smells.
3. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the temperature
is below 0°C. If this is unavoidable, empty the machine, close
the appliance door, disconnect the water inlet pipe and empty
it.
3. Turn the handle about 1/4 a turn anticlockwise and remove.
Moving the machine
If you have to move the machine (moving house etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
MA36
4. Take hold of the coarse filter (A) by the handle with the hole
and remove from the microfilter (B).
5. Clean all filters thoroughly under running water.
6. Remove the flat filter (C) from the base of the washing
compartment and clean both faces thoroughly.
7. Put the flat filter (C) back in the base of the washing
compartment.
8. Place the coarse filter (A) in the microfilter (B) and
press together.
9. Put the filter combination in place and lock by turning the
handle clockwise to the stop. During this process ensure
that the flat filter does not protrude above the base of the
washing compartment.
16
What to do, when...
Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions
given here, without calling out an engineer.
...alarm messages or codes are displayed
The dishwasher will not start or stops during operation.
The intervention of an alarm is indicated by a continuous sequence of intermittent audible signals,
A message or a code (as indicated in the following chart) is displayed.
Open the dishwasher’s door and carry out the following suggested corrective actions.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will
be made, even if the appliance is in guarantee.
Fault code / message
Possible cause
Solutions
- In the digital display appears
the message
"OPEN THE TAP"
The water tap is blocked or furred with
limescale.
Clean the water tap.
The water tap is turned off.
Turn the water tap on.
The machine does not fill with
water.
The filter (where present) in the threaded hose
fitting at the water inlet valve is blocked.
Clean the filter in the threaded hose
fitting.
The water inlet hose has not been correctly laid
or it is bent or squashed.
Check the water inlet hose connection.
The sink spigot is blocked.
Clean out the sink spigot.
The water drain hose has not been correctly laid
or it is bent or squashed.
Check the water drain hose connection.
Protection against flooding is active.
Close the water tap and contact your
local Service Force Centre.
- In the digital display appears
the message "DRAIN
BLOCKED"
The dishwasher will not drain.
- In the digital display appears
the code
Once the checks have been carried out, to continue the programme, close the door and press the confirm/start button. The
programme will continue from the point in which it was interrupted. If the fault code reappears contact your local Service Force
Centre.
For other combinations of fault codes not described in the above chart will appear, please contact your local Service Force Centre.
Fault
Possible cause
Solutions
The dishwasher door has not been properly
closed.
Close the door.
The main plug is not plugged in.
Insert the mains plug.
The fuse has blown in the household fuse box.
Replace the fuse.
For dishwasher models with delay start
option:
Delay start has been selected.
If dishes are o be washed immediately,
cancel the delay start.
The whistling is not a cause for concern.
Use a different brand of detergent.
The programme does not start
There is a whistling noise during
washing
17
...the wash results are not satisfactory
The dishes are not clean
●
●
●
●
●
●
●
●
The wrong washing programme has been selected.
The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.
The spray arms do not rotate freely due to wrong arrangement of the load.
The filters in the base of the washing compartment are dirty or incorrectly positioned.
Too little or no detergent has been used.
Where there are limescales deposits on the dishes; the salt container is empty or the wrong level of the water softener has been
selected.
The drain hose connection is not correct.
The salt container cap is not properly closed.
The dishes are wet and dull
●
●
Rinse aid was not used.
The rinse aid dispenser is empty.
There are streaks, milky spots or a bluish coating on glasses and dishes
●
Decrease rinse aid dosing.
Water drops have dried onto glasses and dishes
●
●
Increase rinse aid dosing.
The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.
If after all these checks, the problem persists, contact your
local Service Force Centre, quoting the model (Mod.), product
number (PNC) and serial number (S.N.).
This information can be found on the rating plate located on
the side of the dishwasher door (see picture).
So that you always have these numbers at hand, we
recommend you to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . .
RA08
This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the
machine yourself.
Repairs carried out by inexperienced persons may cause injury
or serious malfunctioning. Contact your local Service Force
Centre.
Always insist on genuine spare parts.
18
Service and Spare Parts
In the event of your appliance requiring service, or if you wish
to purchase spare parts please contact your local Service
Force Centre by telephoning:
08705 929929
Your telephone call will be automatically routed to the Service
Force Centre covering your post code area.
For the address of your local Service Force Centre and further
information about Service Force, please visit the website at
www.serviceforce.co.uk
Before calling out an engineer, please ensure you read the
details under the heading "What to do, when...".
When you contact the Service Force Centre you will need to
give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number of the appliance (found on the
rating plate)
5. The purchase date
Please note that a valid purchase receipt or guarantee
documentation is required for in-guarantee service calls.
For Customer Service in Ireland please contact us at the
address below:
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
Republic of Ireland
Tel: + 353 (0)1 4090753
Email: [email protected]
Customer Care
Department
For general enquiries concerning your Electrolux appliance or
for further information on Electrolux products, please contact
our Customer Care Department by letter or telephone at the
address below or visit our website at:
www.electrolux.co.uk
Customer Care Department
Electrolux
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 950950 (*)
* calls to this number may be recorded for training purposes
19
Guarantee Conditions
Standard Guarantee Conditions
European Guarantee
We, Electrolux, undertake that if within 12 months of the date
of purchase this Electrolux appliance or any part thereof is
proved to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the same
FREE OF CHARGE for labour, materials or carriage on
condition that:
If you should move to another country within Europe then your
guarantee moves with you to your new home subject to the
following qualifications:
●
The appliance has been correctly installed and used only on
the electricity supply stated on the rating plate.
●
The appliance has been used for normal domestic purposes
only, and in accordance with the manufacturer’s instructions.
●
The appliance has not been serviced, maintained repaired,
taken apart or tampered with by any person not authorised
by us.
●
All service work under this guarantee must be undertaken by
a Service Force Centre.
●
Any appliance or defective part replaced shall become the
Company’s property.
●
This guarantee is in addition to your statutory and other legal
rights.
Exclusions
This guarantee does not cover:
Damage or calls resulting from transportation, improper use
or neglect, the replacement of any light bulbs or removable
parts of glass or plastic.
●
Costs incurred for calls to put right an appliance which is
improperly installed or calls to appliances outside the United
Kingdom.
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
●
Products of Electrolux manufacture which are not marketed
by Electrolux.
The guarantee starts from the date you first purchased your
product.
●
The guarantee is for the same period and to the same extent
for labour and parts as exists in the new country of use for
this brand or range of products.
●
This guarantee relates to you and cannot be transferred to
another user.
●
Your new home is within the European Community (EC) or
European Free Trade Area.
●
The product is installed and used in accordance with our
instructions and is only used domestically, i.e. a normal
household.
●
The product is installed taking into account regulations in
your new country.
Before you move please contact your nearest Customer Care
centre, listed below, to give them details of your new home.
They will then ensure that the local Service Organisation is
aware of your move and able to look after you and your
appliance.
Home visits are made between 8.30am and 5.30pm Monday
to Friday. Visits may be available outside these hours in which
case a premium will be charged.
●
●
20
France
Senlis
Germany
Nurenberg
+33 (0) 344 62 20 13
+49 (0) 800 234 7378
Italy
Pordenone
+39 (0) 800 11 7511
Sweden
Stockholm
+46 (0) 20 78 77 50
UK
Slough
+44 (0) 1753 219898
Ireland
Dublin
+353 (0)1 4090753
Installation instructions
Any electrical and/or plumbing work required to install
this appliance should be carried out by a qualified
electrician and/or plumber or competent person.
Water supply connections
Remove all packaging before positioning the machine.
For making the connection itself, the coupling nut fitted to the
machine’s supply hose is designed to screw onto either a 3/4"
inch gas thread spout or to a purpose made quick-coupling tap
such as the Press-block.
This dishwasher must be plumbed into a cold water supply.
If possible, position the machine next to a water tap and a
drain.
Building-in
The water pressure must be within the limits given in the
"Technical specifications". Your local Water Authority will
advise you on the average mains pressure in your area.
This dishwasher is designed to be fitted under a kitchen
counter or worksurface.
The water inlet hose must not be kinked, crushed, or entangled
when it is being connected up.
Attention!
Carefully follow the instructions on the enclosed template for
building in the dishwasher and fitting the furniture panel.
The dishwasher features fill and drain hoses which can be
turned either to the left or the right to suit the installation by
means of the locknut. The locknut must be correctly fitted
to avoid water leaks. (Attention! NOT all models of
dishwashers have fill and drain hoses provided with locknut. In
this case, this kind of facility is not possible).
No further openings for the venting of the dishwasher are
required, but only to let the water fill and drain hose and power
supply cable pass through.
If the machine is connected to new pipes or pipes which have
not been used for a long time, you should run the water for a
few minutes before connecting the inlet hose.
The dishwasher incorporates adjustable feet to allow the
adjustment of the height.
During all operations that involve accessibility to internal
components the dishwasher has to be unplugged.
Do not use, for connection, old hoses which have been
used in another appliance.
When inserting the machine, ensure that the water inlet hose,
the drain hose and the supply cable are not kinked or
squashed.
The dishwasher is fitted with safety devices that prevent the
wash water returning into the drinking water system and
comply with the applicable plumbing regulations.
Levelling
Good levelling is essential for correct closure and sealing of
the door.
When the appliance is correctly levelled, the door will not catch
on either side of the cabinet.
If the door does not close correctly, loosen or tighten the
adjustable feet until the machine is perfectly level.
Fixing to the adjacent units
The dishwasher must be secured against tilting.
Therefore make sure that the counter it is fixed under, is
suitably secured to a fixed structure (adjacent kitchen units
cabinets, wall).
21
Water outlet hose connection
Electrical connection
The end of the drain hose can be connected in the following
ways:
This appliance must be earthed.
The manufacturer declines any responsibility should this
safety measure not be observed.
1. To the sink outlet spigot, securing it to the underside of the
work surface. This will prevent waste water from the sink
running into the machine.
If the plug that is fitted to your appliance is not suitable for the
socket, it must be cut off and the appropriate plug fitted.
2. Hooked over the edge of the sink using the special curved
plastic guide (if provided with the machine).
Important
The wires on the mains lead are coloured in accordance with
the following code:
3. To a stand pipe provided with vent-hole, minimum internal
diameter 4 cm.
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
Green and Yellow
- Earth
Blue
- Neutral
Brown
- Live
If you fit your own plug, the colours of the wires in the mains
lead of your appliance may not correspond with the markings
identifying the terminals in your plug.
The drain hose can face either to the right or left of the
dishwasher
Ensure the hose is not bent or squashed as this could prevent
or slow down the discharge of water.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the terminal
in the plug which is marked with the letter "E" or the earth
symbol
or coloured green and yellow.
The sink plug must not be in place when the machine is
draining as this could cause the water to siphon back into the
machine.
2. Connect the Blue (neutral) wire to the terminal in the plug
which is marked with the letter "N" or coloured black.
If you use a drain hose extension it must be no longer than 2
metres and its internal diameter must be no smaller than the
diameter of the hose provided.
3. Connect the Brown (live) wire to the terminal in the plug
which is marked with the letter "L" or coloured red.
13 A
E
N
L
CS18
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than the
diameter of the hose provided.
CE04
Attention!
Our appliances are supplied with a security device to protect
against the return of dirty water back into the machine.
If the spigot of your sink has a "no return valve" incorporated
this can prevent the correct draining of your dishwasher.
We advise you therefore to remove it.
The plug moulded onto the lead incorporates a 13amp BSI362
fuse. Only ASTA or BSI fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The
cover/carrier is indicated by the coloured insert at the base of
the plug.
A replacement cover/carrier must be obtained from your local
Service Force Centre.
To isolate the dishwasher from mains, remove the mains plug.
Important!
The plug must still be accessible after the appliance
has been installed.
The appliance should not be connected to the
electrical supply by means of an extension cable.
In case that the electrical cable has to be replaced,
please contact your local Service Force Centre.
22
Hints for test centres
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing
programmes" chart).
Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and
rinse aid respectively and using the test programme (see "Washing programmes" chart).
Load:
12 standard place settings
Rinse aid setting:
position 4 (Type III)
Detergent dosage :
5 g + 25 g (Type B)
Arrangement upper basket
Arrangement lower basket
Arrangement cutlery basket
Arrangement knife basket
Cup racks: position A
23
From the Electrolux Group. The World’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such
as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the
world.
05/04
Subject to change without notice
© Electrolux plc 2004

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement