Tricity Bendix | DH086 | User manual | Tricity Bendix DH086 User Manual

Tricity Bendix DH086 User Manual
OPERATING & INSTALLATION
INSTRUCTIONS
Dishwasher
DH 086
Contents
For the user
For the installer
Important safety information
3
Description of the appliance
4
The control panel
4
Before use
Setting the water softener
Rinse aid
5
5
7
Using your appliance
Loading your appliance
Adjusting the height of the upper basket
Use of detergent
8
8
9
10
Hints and tips
11
Washing programmes
12
Operating sequence
13
Maintenance and cleaning
Cleaning the filters
External cleaning
Prolonged periods of non-operation
Frost precautions
Moving the machine
14
14
14
14
14
14
14
Something not working
15
Hints for test centres
Technical specifications
16
16
Internal cleaning
Installation instructions
Water supply connections
Water outlet hose connection
Electrical connection
Adjusting the worktop
Fitting under a counter
Levelling
Guide to use the instruction book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
1. 2. 3.
Step by step
Hints and tips
Environmental information
2
17
17
17
18
19
19
19
Important safety information
It is most important that this instruction book should be retained with the appliance for future reference. Should
the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always
ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the
appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or
using the appliance.
Installation
●
This appliance is heavy. Care should be taken when
moving it.
●
It is dangerous to alter the specifications or attempt to
modify this product in any way.
●
Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
●
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
●
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
●
Care should be taken when cleaning the bottom
door seal and hinge area as any exposed metal
edges may cut if care is not taken.
●
This product should be serviced by an authorised
Service engineer, and only genuine spare parts
should be used.
●
Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Force
Centre. Always insist on genuine spare parts.
Conservation
In the interest of the environment:
Child Safety
●
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
●
Keep all packaging well away from children.
●
Keep all detergents in a safe place out of children's
reach.
During Use
●
Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be
washed in this dishwasher.
●
Under no circumstances should you open the door whilst
the appliance is in operation. Always turn off the
appliance before opening the door.
●
Only use detergent specifically designed for use in
dishwashers.
●
Long bladed knives stored in an upright position are
a potential hazard.
●
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
●
When finishing loading or unloading close the door, as an
open door can be a hazard.
●
Do not sit or stand on the open door.
●
Isolate the appliance from the power supply and turn off
the water supply after use.
3
●
Materials marked with the symbol
are recyclable.
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
●
When the appliance is to be scrapped, cut off the
power supply cable and make the door closing device
unusable to prevent young children from being
trapped inside.
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
Description of the appliance
1.
Water hardness adjustment
2.
Levelling spacers
3.
Upper basket stop
4.
Large filter
5.
Salt container
6.
Rinse aid dispenser
12
2
3
7.
Detergent dispenser
8.
Control panel
9.
13
1
11
4
10
5
Central filters
9
6
10. Lower spray arm
11. Upper spray arm
7
12. Upper basket
13. Worktop
8
IN88
The control panel
MAINS ON
RINSE & HOLD
POWER WASH
NORMAL WASH
ECO WASH
1
2
1
2
3
4
65°
65°
65°
3
4
5
6
7
7. Wash programme phase indicator
1. On/Off push button
As the programme progresses, the programme
selector dial turns, to show the phase in the wash
programme the appliance has reached.
2. Mains on indicator light
3. Programme guide
Prewash / Rinse and Hold
4. Door handle
Wash
5. Programme marker
Cold rinse
Hot rinse
6. Programme selector dial
Drying
4
Before use
Before using your dishwasher for the first
time:
1. Ensure that the electrical and water connections comply
with the installation instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour half a litre of water inside the salt container and
then fill with salt.
5. Fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener designed
to remove minerals and salts from the water supply, which
would have a detrimental or adverse effect on the operation
of the appliance.
The higher the content of these salts, the harder your water
is.
Water hardness is measured in equivalent scales, Clarke,
French degrees and PPM (parts per Million).
Water hardness
Clarke
PPM
French
Use
degrees degrees (Parts per Level
of
Million)
(°TH)
salt
The softener should be adjusted according to the hardness
of the water in your area. Your local Water Authority can
advise you on the hardness of the water in your area.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener should
be adjusted.
0 - 10
0 - 14
0 - 140
1
NO
NO
NO
11 - 27
15 - 39
141 - 390
2
YES
NO
NO
28 - 35
40 - 50
400 - 500
3
YES
YES
NO
36 - 49
51 - 70
501 - 700
4
YES
NO
YES
50 - 63
71 - 90
701 - 900
5
YES
YES
YES
To adjust the water softener
Level 1
If your water is "level 1" it is already soft and therefore there
is no need to use salt.
Levels 3 and 5 (water softener adjustment)
If your water is level 3 or 5, proceed as follows:
- slide out the lower basket and unscrew the cap of
the salt container;
- turn the two-position selector anticlockwise from
position - to position + with the aid of a blunt knife or
screwdriver.
AA01
Levels 4 and 5 (adjustment on the machine)
If your water is level 4 or 5, open the door and drill
membrane (A) on the upper left-hand corner of the machine.
A
With a water hardness of level 5 both adjustments must
be made.
AA04
5
Water
Adjustment
softener
on the
adjustment machine
Filling with salt
Only use salt specifically designed for use
in dishwashers.
All other types of salt not specifically designed
for use in a dishwasher, especially table salt, will
damage the water softener.
Only fill with salt just before starting one of
the complete washing programmes (not the
Rinse and Hold programme). This will prevent any
grains of salt or salty water, which may have been
spilled, remaining on the bottom of the machine
for any period of time, which may cause
corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt container.
2. Pour half a litre of water inside the container
(this is necessary only before filling with salt for
the first time).
LE
SA LT
SA LZ
SA L
SE
3. Using the funnel provided, pour in the salt until the
container is full.
Do not worry if water over flows from the unit when
filling with salt, this is quite normal.
4. Replace the cap making sure that there is no trace of salt
on the screw thread or on the gasket.
SR06
5. Screw on the cap tightly.
The salt container will require topping up periodically.
The salt cap has a refill indicator window in the centre.
A green float is clearly visible when there is salt inside the
container, and almost disappears when the salt has finished
reminding you to add salt.
SR11
6
Rinse aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, and spot and streak free drying.
The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40
dishwashing programmes, depending upon the dosage
setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is completely
full. The indicator (B) will be completely dark.
3. Top up the rinse aid when the indicator (B)
becomes clear.
A
BR01
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid compartment.
Clean up any rinse aid spilt during filling with an absorbent
cloth to avoid excess foaming during the next wash.
B
According to the finish and drying results obtained, adjust
the dose of rinse aid by means of the 6 position selector (C)
(position 1 minimum dosage, position 6 maximum dosage).
Start from position 3.
x 6 5 4 3
2 1
m
a
Adjusting the dose
BR03
Gradually increase the dose if there are drops of water or
lime spots on the dishes after washing. Reduce it if there are
sticky whitish streaks on the dishes.
BR02
7
x
6 5 4 3
2 1
m
a
C
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any scraps of
food, to avoid clogging the filters and consequently reducing
the performance.
Do not load very small items which can fall
through the baskets.
Open the door and slide out the baskets to load the dishes.
UI57
The lower basket
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can
turn freely.
UI12
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard.
Long and/or sharp items of cutlery such as
carving knives must be positioned
horizontally in the upper basket.
Take care when loading or unloading sharp
items such as knives.
Cutlery should be placed in the removable cutlery basket
with the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
Silver cutlery tends to go black if mixed with steel cutlery.
Place it in the cutlery basket separate from the others.
Arrange spoons, dessert spoons, knives and other small
items of cutlery in the rack on the side of the cutlery basket.
UI08
8
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
Larger plates (dinner plates up to 24 cm in diameter) must
be loaded in the front part of the upper basket.
Arrange items on and underneath the fold-down cup rack so
that water can reach all surfaces.
Glasses with long stems can be placed upside down in the
raised cup racks.
Light items (plastic bowls etc.) should be loaded in the upper
basket and arranged so they do not move.
US20
Before closing the door, ensure that the
spray arms can rotate freely.
When loading the dishes, ensure that you do
not cover the water inlet funnel in the middle
of the upper basket.
US16
US16
Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to 31 cm in
diameter) you can load them in the lower basket after
moving the upper basket to the higher position.
A
To move to the higher position proceed as follows:
1. Move the front runner stops (A) of the upper basket
outward and slide the basket out.
2. Refit the basket in the higher position and replace
the stops (A) in their original position.
When the top basket is in the higher
position it will only take plates up to 20 cm
in diameter and you will not be able to use
the raised cup racks.
RC01
After loading your machine always close
the door, as an open door can be a hazard.
9
Use of detergent
Only use detergents specifically designed
for use in dishwashers.
We recommend the use of Finish detergents which are
available in the following options:
Finish Double Action Tablets. Each tablet has the exact
amount of detergent required, simply place in the dispenser.
Finish Powder recommended for every day use.
Finish Liquid Gel ideal for every day use. As the gel is extra
gentle it is recommended for fine bone china.
Min = 15 g
Max = 30 g D
If using powder detergents proceed as follows:
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent according to the recommended
quantity given in the "Washing programmes" chart.
As all detergents are not the same, you should also
consult the instructions on the packet.
M
M IN
AX
3. Always close the lid.
DE17
4. If the programme has a prewash add a little amount of
detergent over the lid of the dispense, according to the
recommended quantity given in the "Washing
programmes" chart.
If using detergent in tablets proceed as follows:
1. For all programmes; place 1 tablet inside the detergent
dispenser.
2. Always close the lid.
3. For all programmes with prewash; place a portion of a
further tablet on the lid of the detergent dispenser.
DE02
Insufficient quantities of detergent will
produce poor washing results, whereas an
excessive amount of detergent will not
improve washing results and is also
wasteful.
Using no more than the correct amount also
contributes to reducing pollution.
Compact detergents with enzymes
In these low-alkaline compact powders the environmentally
unfriendly components have been replaced by natural
enzymes and other more biodegradable substances.
These new compact powders are generally phosphate-free.
10
Hints and tips
To save energy
Items not suitable for dishwashers
Place dishes in the machine immediately after every meal
and wait until the dishwasher is full before washing.
The following items should not be washed in the
dishwasher (unless they are sold as dishwasher
proof):
If necessary run the Rinse and Hold programme (see
"Washing Programmes" chart) so that any food scraps do
not become caked on the dishes while you are waiting to run
the complete wash programme.
- Cutlery with wooden or horn handles or
glued parts
- bronze cutlery
Do not prewash dishes under running water.
- saucepans with wooden handles
- aluminium ware
- crystal ware
For best washing and drying results
- leaded glass
Before loading, remove all scraps of food and soak very
heavily soiled pots and pans.
- antique or fine decorated china
Arrange saucepans, cups and glasses etc. upside-down.
Certain types of decoration can discolour when washed
in a dishwasher.
- plastic items
Tilt items with convex or concave surfaces so that the water
drains off easily.
Crystal-ware and plastic objects, if not guaranteed
dishwasher proof should be washed by hand.
Avoid contact between the dishes as far as possible.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
A chemical reaction can occur between silver cutlery
and stainless steel cutlery. As a precaution, do not wash
together.
Iron and cast iron objects can rust and stain other items.
Aluminium tends to go black, copper, pewter and
brass tend to stain.
If in doubt check with manufacturer of
the item.
When buying new dishes, ensure that
they are dishwasher proof.
For best results we recommend the use of Finish detergents, rinse aid and salt.
EASY
POURING
PACK
N EW
TION
DOUBLE AC
FOR A
BRILLIANT
SHINE
L I Q U I D
G E L
P O W D E R
RINSE
C O N C E N T R AT E D D I S H WA S H E R D E T E R G E N T
DE15
11
Washing programmes
Programme
RINSE
&
HOLD
* POWER
WASH 65°C
Degree of soil
Any.
Partial load (to be
completed later in the
day).
Heavy soil.
Crockery, cutlery,
pots and pans
Starting position
of the
programmer
Required
push
button
1
On/Off
Recommended
quantity of detergent
wash
/
Cycle
description
prewash
/
1 cold rinse, (to avoid
food scraps from
sticking together).
2
On/Off
20 g
5g
Cold prewash
Main wash up to 65°C
2 cold rinses
1 hot rinse
25 g
/
Main wash up to 65°C
1 cold rinse
2 hot rinses
25 g
/
Main wash up to 65°C
2 cold rinses
NORMAL
WASH 65°C
Normal soil.
Crockery and cutlery
3
On/Off
** ECO
WASH 65°C
Light soil.
Crockery and cutlery
4
On/Off
* Testing programme for EN 50242 (see "Hints for test centres").
** This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery
(except pots) so that you may re-use them promptly.
12
Operating sequence
1. Check the filters
10. Switch off the dishwasher
Ensure they are clean and properly positioned
(see "Maintenance and cleaning").
Switch off the dishwasher by pressing the On/Off
push button and open the door.
Wait a few minutes before removing the dishes; in
this way they will be cooler and the drying will be
improved.
2. Check that there is rinse aid and
salt
Empty the lower basket first and then the upper
one; this will avoid water dripping from the upper
basket onto the dishes in the lower one.
3. Load the dishes
Remove any scraps of food.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the water
tap turned off.
Pull the lower basket out and arrange the saucepans,
plates and cutlery in it.
Pull the upper basket out and arrange the plates,
saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
In general it is not advisable to open the
door while the machine is working; if the
door is opened however, a safety device
ensures that the machine stops.
4. Ensure that the spray arms can
rotate freely.
5. Measure out detergent
Important!
Care must be taken if the door is opened
during the hot phase or immediately
after a programme has finished, as
steam may escape.
Add the required amount of detergent into the
dispenser according to the indications in the "Washing
programmes" chart.
Close the detergent dispenser lid.
6. Close the dishwasher door
7. Set the programme
Turn the programme selector dial clockwise until the
number of the programme you wish to select
corresponds with the programme marker.
8. Start the programme
Depress the On/Off push button.
The "Mains On" indicator light will come on and the
machine will start.
If you wish to interrupt the washing programme at any
time press this button again.
9. At the end of the washing
programme
At the end of the programme the dishwasher will
automatically stop.
The "Mains On" indicator light remains on until the
On/Off push button is depressed.
13
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent and
rinse aid dispensers are cleaned regularly with a damp
cloth.
We recommend the use of Finish Dishwasher Cleaner
every 3 months or run a 65°C wash without dishes using
detergent. Regular use of Finish Dishwasher Cleaner cleans
inaccessible parts, eliminates unpleasant food odours and
helps prevent the build-up of limescale.
Cleaning the central filters (After each wash)
Inspect the central filters (B) and (C) and remove any scraps
of food with a brush, under running water.
Filters (B) and (C) are both removed by lifting up the outer
one (B) (pulling the central funnel upwards); the smaller filter
(C) can be removed by pressing the two tongues (D).
D
C
B
Once cleaned, refit the filters by pressing them down until
they click into place.
MA13
MA08
Cleaning the large filter (every week)
Clean the large filter (A) on both sides under running water,
using a brush.
E
To take it out, remove the spray arm by pressing the two
tongues (E), turn the ring (F) anticlockwise and then slide
the whole part out. Refit the filter following the above
instructions in reverse order.
A
F
External cleaning
MA01
Clean the external surfaces of the machine and control
panel with a damp soft cloth. If necessary use only neutral
detergents. Never use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....).
Prolonged periods of non-operation
If you are not using the machine for any period of time
you are advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of any
unpleasant smells.
4. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable, empty the
machine, close the appliance door, disconnect the water
inlet pipe and empty it.
The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the
filters will produce poor washing results.
Cleaning the filters is vital to ensure correct
operation of the machine.
Moving the machine
If you have to move the machine (moving house etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
14
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an
engineer.
Before contacting your local Service Force Centre, please carry out the checks listed below.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a
charge will be made even if the appliance is in guarantee.
Symptom
Solution
The machine will not start
●
The door has not been properly closed.
●
The plug is not properly inserted in the power socket.
There is a power failure.
●
●
Ensure the water tap is open.
Ensure the mains water supply has not been cut off.
The inlet hose may be squashed or bent. Reposition the hose.
The inlet hose may be blocked. Switch off the water supply and clean the filter.
The filters are blocked
●
Clean the filters (refer to "Maintenance and cleaning").
The spray arms are not rotating
●
Ensure the crockery is loaded correctly.
The dishwasher will not drain
●
The drain hose may be squashed or bent. Reposition the hose.
The sink may be blocked. Clear any blockages.
The drain hose extension is not correct. Follow the instructions for connecting to the waste.
There is no vent in the end of the drain hose.
The machine does not fill
with water
●
●
●
●
●
●
The machine is noisy
●
Dishes are rattling against each other, refer to “Loading your machine”.
The spray arms are knocking against the dishes. Refer to "Loading your machine".
The door is difficult to close
●
The dishwasher is not level, or not properly built-in.
Visible lime deposits or white
film on the dishes
●
●
Check that there is salt and that the salt cap is tight.
Check that the right level of the water softener is set.
The dishes are not quite dry
●
The rinse aid has run out or too little is being used.
The dishes are not clean
(poor wash)
●
The baskets are too full.
The dishes have not been arranged properly.
The spray arms do not rotate
The spray arms are clogged.
The filters are clogged.
The filters are not in the correct position.
Not enough detergent has been used or it is unsuitable.
The detergent is old or has gone hard.
The salt container cap is not properly closed.
The washing programme selected is too gentle.
●
●
●
●
●
●
●
●
●
●
If after all these checks, the problem persists, contact your local
Service Force Centre, quoting the model and serial number.
This information can be found on the rating plate located on the
right hand side of the dishwasher door (see picture).
Service and spare parts
This product should be serviced by an authorised
Service engineer, and only genuine spare parts
should be used. Under no circumstances should
you attempt to repair the machine yourself.
Repairs carried out by inexperienced persons may
cause injury or serious malfunctioning. Contact
your local Service Force Centre.
Always insist on genuine spare parts.
15
Prod.No. ........ Ser. No. .........
RA01
Mod. ........
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid
dispenser.
Test standard
EN 50242
Reference programme:
POWER WASH 65°C
Load:
8 standard place settings
Rinse aid selector:
position 4
Detergent dosage :
20 g in the dispenser
5 g on the dispenser lid
UI57
US56
Arrangement
lower basket
Arrangement
upper basket
Technical specifications
DIMENSIONS
Width
Height with worktop
Height without worktop
Max depth
Max depth with open door
ELECTRICAL CONNECTION
POWER OF HEATING ELEMENT
OVERALL POWER
Voltage
WATER SUPPLY PRESSURE
Minimum
Maximum
CAPACITY
45 cm
85 cm
82 cm
60 cm
115.9 cm
220/240 V - 50 Hz
2570 W
2770 W
50 kPa (0.5 bar)
800 kPa (8 bar)
8 place settings
16
Installation instructions
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a
drain.
Water supply connections
This dishwasher must be plumbed into a cold water supply.
The water pressure must be within the limits given in the
technical specifications.
Your local Water Authority will advise you on the average
mains pressure in your area.
The dishwasher features fill and drain hoses which can be
turned either to the left or the right to suit the installation.
The locknut must be correctly fitted to avoid water
leaks.
Avoid bends or kinks in the hose which could prevent or slow
down the water supply.
If the machine is connected to new pipes or pipes which
have not been used for a long time, you should run the water
for a few minutes before connecting the inlet hose. This will
prevent deposits of sand or rust clogging the inlet hose filter.
Water outlet hose connection
The end of the drain hose can be connected in the following
ways:
1
3
Ø
Ø
18
21
2. Hooked over the edge of the sink using the special
curved plastic guide provided.
2
min 4 cm
1. To the sink outlet siphon, securing it if necessary with a
clip.
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
min 30 cm
max 100 cm
max 100 cm
3. To a stand pipe provided with vent-hole, minimum internal
diameter 4 cm.
CS09
The drain hose can face either to the right or left of the
dishwasher
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than the
diameter of the hose provided.
+ 2 m max
CS10
The sink plug must not be in place when the machine is
draining as this could cause the water to siphon back
into the machine.
17
min 30 cm
max 100 cm
If you use a drain hose extension it must be no longer than 2
metres and its internal diameter must be no smaller than the
diameter of the hose provided.
max 100 cm
Ø 18
Ø 21
Ensure the hose is not bent or squashed as this could
prevent or slow down the discharge of water.
Electrical connection
This appliance must be earthed.
The manufacturer declines any responsibility
should this safety measure not be observed.
If the plug that is fitted to your appliance is not suitable for
the socket, it must be cut off and the appropriate plug fitted.
Important
The wires on the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
Brown
-Earth
-Neutral
-Live
If you fit your own plug, the colours of the wires in the mains
lead of your appliance may not correspond with the
markings identifying the terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter "E" or
the earth symbol
or coloured green and yellow.
CE03
2. Connect the Blue (neutral) wire to the terminal in the plug
which is marked with the letter "N" or coloured black.
3. Connect the Brown (live) wire to the terminal in the plug
which is marked with the letter "L" or coloured red.
The plug moulded onto the lead incorporates a 13amp
BSI362 fuse. Only ASTA or BSI fuses should be used.
The plug must not be used if the fuse cover/carrier is lost.
The cover/carrier is indicated by the coloured insert at the
base of the product.
A replacement cover/carrier must be obtained from your
local Service Force Centre.
This appliance complies with the following E.E.C.
Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility
Directive) and subsequent modifications.
18
Adjusting the worktop
You can move the worktop forward or backward by 25 mm in
order to align the machine with other kitchen units.
Simply unscrew the two front retaining screws, move the top
to the required position and then retighten the screws.
Fitting under a counter
(kitchen worktop or sink)
IN02
By removing the machine’s worktop, you can install it under
a close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.
570-
600
Proceed as follows:
820
- Remove the machine’s worktop by unscrewing the
two front retaining screws, pull from the front and
slide out the rear slots, lifting the worktop.
Insert the machine after adjusting height and levelling with
the adjustable feet. When inserting the machine, ensure that
the water inlet and drain hoses are not kinked or squashed.
450
IN04
Levelling
Good levelling is essential for correct closure and sealing of
the door.
When the appliance is correctly levelled, the door will not
catch on the levelling spacers on either side of the cabinet.
If the door does not close correctly, loosen or tighten the
adjustable feet until the machine is perfectly level.
IN06
19
IN07
Tricity Bendix, 55-77 High Street, Slough, Berkshire, SL1 1DZ
Customer care telephone number...
08705 950 950
152995 62/2
© Electrolux Household Appliances Limited 2000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising