Electrolux WAGL4E300 User Manual

WAGL4E300
EN
Washing Machine
User Manual
2
www.electrolux.com
CONTENTS
1. SAFETY INFORMATION....................................................................................3
2. SAFETY INSTRUCTIONS..................................................................................4
3. INSTALLATION.................................................................................................. 5
4. PRODUCT DESCRIPTION................................................................................ 9
5. CONTROL PANEL........................................................................................... 11
6. KNOB AND BUTTONS.....................................................................................13
7. PROGRAMMES .............................................................................................. 16
8. SETTINGS........................................................................................................20
9. BEFORE FIRST USE....................................................................................... 20
10. DAILY USE..................................................................................................... 21
11. HINTS AND TIPS........................................................................................... 26
12. CARE AND CLEANING..................................................................................27
13. TROUBLESHOOTING....................................................................................31
14. CONSUMPTION VALUES..............................................................................35
15. TECHNICAL DATA.........................................................................................36
16. ACCESSORIES..............................................................................................37
17. GUARANTEE ................................................................................................ 38
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the
result of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Do not let children play with the appliance.
Children aged 3 years and under must be kept away
from this appliance when it is in operation at all times.
Keep all packaging away from children and dispose of
it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance door
when it is open.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
•
•
•
Do not change the specification of this appliance.
Do not exceed the maximum load of 9 kg (refer to the
"Programme chart" chapter).
The operating water pressure at the water entry point
from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
The ventilation opening in the base (if applicable) must
not be covered by a carpet, mat, or any floor covering.
4
www.electrolux.com
•
•
•
•
•
•
The appliance must be connected to the water mains
using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
Clean the appliance with a moist cloth. Use only
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
2. SAFETY INSTRUCTIONS
2.1 Installation
•
•
•
•
•
•
•
•
•
Remove all the packaging and the
transit bolts.
Keep the transit bolts in a safe place.
If the appliance is to be moved in
future they must be reattached to lock
the drum to prevent internal damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not install or use a damaged
appliance.
Follow the installation instruction
supplied with the appliance.
Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
The floor area where the appliance is
to be installed must be flat, stable,
heat resistant and clean.
Make sure that there is air circulation
between the appliance and the floor.
Adjust the feet to have the necessary
space between the appliance and the
flooring.
•
•
Do not install the appliance where the
appliance door cannot be fully
opened.
Do not put a container to collect
possible water leakage under the
appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.
2.2 Electrical connection
•
•
•
•
•
•
The appliance must be earthed.
Always use a correctly installed
shockproof socket.
Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need to
be replaced, this must be carried out
by our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
ENGLISH
•
•
•
access to the mains plug after the
installation.
Do not touch the mains cable or the
mains plug with wet hands.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
This appliance complies with the
E.E.C. Directives.
2.3 Water connection
•
•
•
Do not cause damage to the water
hoses.
Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
2.4 Use
WARNING!
Risk of injury, electrical
shock, fire, burns or damage
to the appliance.
•
•
This appliance is for household use
only.
Follow the safety instructions on the
detergent packaging.
•
•
•
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Make sure that all metal objects are
removed from the laundry.
Do not touch the glass door while a
programme is in operation. The glass
can get hot.
2.5 Service
•
•
To repair the appliance contact an
Authorised Service Centre.
Use original spare parts only.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
•
•
•
•
Disconnect the appliance from the
mains electrical and water supplies.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
Use the gloves.
1. Remove the external film. If
necessary, use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
5
6
www.electrolux.com
3. Remove the internal film.
7. Remove the polystyrene protection
from the bottom.
1
4. Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.
5. Carefully put down the appliance with
the rear side on it.
6. Put the front polystyrene packaging
element on the floor under the
appliance.
Make sure not to
damage the hoses.
2
8. Pull up the appliance in vertical
position.
9. Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see
water flowing from the
drain hose. This is due
to the testing with water
of the appliance in
factory.
ENGLISH
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
10. Remove the three bolts by using the
key supplied with the appliance.
x4
11. Pull out the plastic spacers.
12. Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
3.2 Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that carpets do
not stop the air circulation
below the appliance.
Make sure that the appliance
does not touch the wall or
other units.
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
3.3 The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
2. Position it toward left or right
depending on the position of the
water tap.
7
8
www.electrolux.com
A
45
20
O
O
If this occur, close the water tap and
contact the authorized service centre to
replace the hose.
3.5 Water drainage
Make sure that the inlet hose
is not in vertical position.
3. If necessary, loose the ring nut to set
it in the correct position.
4. Connect the water inlet hose to the
cold water tap with 3/4" thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension
hose if the inlet hose is too
short. Contact the service
centre for the replacement of
the inlet hose.
3.4 Water-stop device
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing.
The red sector in the window «A» shows
this fault.
The drain hose should stay at a height of
not less than 60 cm and not more than
100 cm.
It is possible to connect the drain hose in
different ways:
1. Make a U shape with the drain hose
and put it around the plastic hose
guide.
2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.
Make sure that the plastic
guide cannot move when the
appliance drains.
ENGLISH
Make sure that the drain
hose end is not immersed in
the water. There may be a
return of dirty water into the
appliance.
3. To a stand pipe with vent-hole Insert the drain hose directly into a
drain pipe. Refer to the illustration.
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm min. 1.5") must be larger
than the external diameter of
the drain hose.
4. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
9
5. Without the plastic hose guide: Put
the drain hose in the spigot and
tighten it with a clip. Refer to the
illustration.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
6. Position the hose directly to a built-in
drain pipe in the room wall and
tighten it with a clip.
You can extend the drain hose to
maximum 400 cm. Contact the
authorized service centre for the other
drain hose and the extension.
4. PRODUCT DESCRIPTION
4.1 Special features
Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
energy and detergent consumption and
respectful of fabric care.
•
The Oko-Mix technology has been
thought to protect the fabric fibres
•
thanks to different pre-mixing phases
that dissolves first the detergent and
then fabric softener in the water
before they are distributed in the
laundry. So every fibre is reached and
cared of.
The ProSense technology detects
the laundry amount defining the
programme duration in 30 seconds.
10
www.electrolux.com
•
The washing programme is tailored to
the laundry load and the type of fabric
without consuming more time, energy
and water than necessary.
The steam as a quick and easy way
to refresh the clothes. The gentle
steam programmes remove odours
and reduce creases in dry fabrics so
they need little ironing.
The Plus Steam option, finishes
every cycle with gentle steam that
relaxes the fibres and reduces fabric
creasing. Ironing will be easier!
•
•
The Stains option pre-treats
stubborn stains optimizing the
effectiveness of the stain remover.
Thanks to the Soft Plus option, the
fabric softener is uniformly spread out
in the laundry and deeply penetrates
the fabric fibres favouring a perfect
softness.
4.2 Appliance overview
1
2
8
3
9
10
4
5
11 12
6
7
1
2
3
4
5
6
7
Worktop
Detergent dispenser
Control panel
Door handle
Rating plate
Drain pump filter
Feet for levelling the appliance
8
9
10
11
12
Drain hose
Inlet hose connection
Mains cable
Transit bolts
Hose support
ENGLISH
11
5. CONTROL PANEL
5.1 Control panel description
3
2
1
P r o g ra m m e
Eco
Baumwolle
Pflegeleicht
Fe i n w ä s c h e
Wolle/S eide
Dampf
ÖKOPower
Anti-Allergie
2 0 m i n . - 3 kg
O u td o o r
M a s c h i n e n re i n i g u n g
4
5
Soft Plus
11 10 9
12
1 Programme dial
2 Display
3 Eco touch button (Eco)
4 Time saving touch button (Time
Save)
5 Rinse touch button (Rinse)
• Extra rinse option (Extra Rinse)
•
Skipping wash phase - Only
Rinse option (Only Rinse)
6 Start/Pause touch button (Start/
Pause)
7 Stain/Prewash touch button (Stains/
Prewash)
•
Stain option (Stains)
•
Prewash option (Prewash)
8
7
6
8 Delay start touch button (Delay Start)
9 Steam Plus touch button (Plus
Steam)
10 Spin reduction touch button (Spin)
•
Rinse Hold option
•
•
Extra Silent option
Skipping wash and rinse phases -
•
Only Spin option (Only Spin)
Skipping wash, rinse and spin
phases - Only Drain option (Only
drain)
11 Temperature touch button
(Temperature)
12 On/Off push button (On/Off)
12
www.electrolux.com
5.2 Display
MIX
Maximum load indicator. The
indicator flashes during the laun‐
dry load estimation (refer to ProSense load detection paragraph) .
Maximum laundry indicator. It blinks if the laundry amount exceeds
the declared load.
Door locked indicator.
Delay start indicator.
The digital indicator can show:
• Programme duration (e. g.
•
Delay time (e. g.
•
Cycle end ( ).
•
Warning code (e.g.
or
).
).
).
Washing phase indicator. It flashes during pre-wash and wash
phase.
Rinsing phase indicator. It flashes during rinse phase.
When the Soft Plus option is activated, the
indicator appears.
Spinning and draining phase indicator. It flashes during spin and
drain phase.
MIX
OKO-Mix indicator.
Steam phase indicator.
Anti-crease phase indicator.
Child safety lock indicator.
Energy saving indicators. The
indicator appears by selecting a
programme for cotton at 40 °C or 60 °C.
ENGLISH
13
Time saving indicator.
Spin speed indicator.
Rinse hold indicator.
Extra silent indicator.
Temperature indicator. The
is set.
indicator appears when a cold wash
5.3 Multilingual badges
Adhesive badges in different languages
are supplied with the appliance.
Program
Koge-/Kulørt
Syntetisk
Finvask
Uld/Silke
The desired badge can be glued around
the programme dial.
Damp
Antiallergi
20 min. - 3 kg
Motionstøj
Vattæpper
Jeans
6. KNOB AND BUTTONS
6.1 On/Off
6.3 Temperature
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
When you select a washing programme,
the appliance automatically proposes a
default temperature.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
6.2 Introduction
The options/functions are
not selectable with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allowed
you to set the incompatible
options/functions together.
Touch this button repeatedly until the
desired temperature value appears on
the display.
When the display shows the indicators
and
the water.
, the appliance does not heat
6.4 Spin
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed.
Touch repeatedly this button to:
• Decrease the spin speed.
•
The display shows only
the spin speeds available
for the set programme.
Activate the Rinse Hold option.
The final spin is not performed. The
water of the last rinse is not drained
out to prevent the fabrics from
14
www.electrolux.com
creasing. The washing programme
ends with water in the drum.
The display shows the indicator
.
The door stays locked and the drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
If you touch the Start/Pause button,
the appliance performs the spinning
phase and drains the water.
•
The appliance empties
the water out
automatically after 18
hours approximately.
Activate the Extra Silent option.
The intermediate and the final
spinning phases are suppressed and
the programme ends with water in the
drum. This helps to reduce creasing.
The display shows the indicator .
The door stays locked. The drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are
available. In some programmes the
rinses are performed with more water.
If you touch the Start/Pause button,
the appliance performs the only
draining phase.
•
•
The appliance empties
the water out
automatically after 18
hours approximately.
Only drain option (Skipping the
wash, rinse and spin phases) .
The appliance performs the only
draining phase of the selected
washing programme.
The display shows the indicator
(cold), the phase indicator
spin speed.
and the
If it is necessary to
reduce the spin speed,
select a programme with
a lower spin speed as
default.
6.5 Stains/Prewash
Press this button repeatedly to activate
one of the two options or both.
The relevant indicator goes on in the
display.
•
Stains
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
Pour the stain remover into
compartment
. The stain remover
is pre-mixed and heated with
detergent in order to improve its
effectiveness.
•
This option is not
available with a
temperature lower than
40 °C.
Prewash
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
The display shows the indicator
6.6 Plus Steam
(cold), and the indicator
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
(no
spin) and the indicator .
Only Spin option (Skipping the wash
and rinse phases) .
The appliance performs only the
spinning phase of the selected
washing programme.
The steam phase reduces fabric
creasing and facilitates the fabric ironing.
The indicator
flashes on the display
during steam phase.
ENGLISH
This option increases the
programme duration slightly.
When the programme stops the display
shows a zero
, the indicator
is
starts
steady on and the indicator
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks.
A small laundry load helps to
reach better results.
6.7 Delay Start
With this option you can delay the start of
a programme in a more convenient time.
Touch repeatedly the button to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching theStart/Pause button, the
display shows the indicator
and the
selected delay time and the appliance
begins the countdown.
6.8 Rinse
With this button you can select one of the
following options:
•
•
Extra Rinse option
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
Skipping wash phase - Only Rinse
option
The appliance performs only the
rinsing phase , the spinning and the
draining phases of the selected
programme.
15
The corresponding indicator above the
touch button illuminates.
6.9 Time Save
With this option you can decrease the
programme duration.
•
•
If your laundry is normally soiled, it
may be advisable to shorten the
washing programme. Touch this
button once to decrease the duration.
In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator
.
This option can also be used
to shorten the Dampf
programme duration.
6.10 Eco
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
The appliance decreases the washing
temperature and extends the washing
time to obtain a good washing efficiency
by saving energy. The display shows the
indicator
.
If you select the Cotton
programme at 40°C or 60°C,
the display shows the
indicator
; these are
the standard cotton
programmes, the most
efficient programmes in
terms of combined energy
and water consumption.
6.11 Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a
running programme.
16
www.electrolux.com
7. PROGRAMMES
7.1 Programme Chart
Washing programmes
Programme
Programme description
Washing programmes
Cottons
Baumwolle
White cotton and coloured cotton. Normal soil and light
soil.
Standard programmes for the Energy Label consump‐
tion values. According to regulation 1061/2010, the pro‐
gramme Baumwolle at 60 °C and the programme Baum‐
wolle at 40 °C with the
option are respectively the
«Standard 60°C cotton programme» and the «Standard
40°C cotton programme». They are the most efficient pro‐
grammes in terms of combined energy and water con‐
sumption for washing normally soiled cotton laundry.
The water temperature of the washing phase
may differ from the temperature declared for
the selected programme.
Synthetics
Pflegeleicht
Synthetic items or mixed fabric items. Normal soil.
Delicates
Feinwäsche
Delicate fabrics such as acrylics, viscose, polyester
items. Normal soil.
Wool/Silk
Wolle/Seide
Machine washable wool, hand washable wool and deli‐
cate fabrics with «hand washing» care symbol.1)
Steam programme
Steam
Dampf
Steam programme for cotton and synthetic items.
Steam can be used for dried2), washed or worn once laun‐
dry. This programme reduce creases and odours3) and re‐
laxes the fibres. When the programme is completed, quick‐
ly remove the laundry from the drum. After a steam pro‐
gramme, ironing becomes effortless. Do not use any deter‐
gent. If necessary, remove stains by washing or using lo‐
calized stain removal. Steam programmes do not perform
any hygienic cycle. Do not set a Steam programme with
these types of items:
• Items that are not suitable for tumble drying.
• All items with plastic, metal, wooden parts or alike.
Washing programmes
OKOPower
ÖKOPower
Cotton and fast-coloured synthetic items. Complete
washing programme that, in only 59 minutes, washes the
daily soiled laundry intensively and ensures a good wash‐
ing performance in a short time.
ENGLISH
17
Programme
Programme description
Anti-allergy
Anti-Allergie
White cotton items. This programme removes micro-or‐
ganisms thanks to a washing phase with the temperature
maintained above 60°C for some minutes. This helps in re‐
moving germs, bacteria, micro-organism and particles. An
additional rinsing phase ensures a proper removal of deter‐
gent residues and pollens/allergenic items. In this way the
wash is more effective.
20 min.-3 kg
20 min. - 3 kg
Cotton and synthetic items with light soil level or worn
only once.
Outdoor
Outdoor
Synthetic sport items. This programme is designed to
gently wash modern sports clothes such as gym, cycling or
jogging clothes and similar outdoor items. The recommen‐
ded laundry load is 2.5 kg.
To reach better results, do not use fabric soft‐
ener and make sure that there is no softener
residue in the detergent dispenser.
Waterproof, waterproof-breathable fabrics. This pro‐
gramme can also be used as waterproof reviving cycle,
specifically tailored for treating clothes with a hydrophobic
coating, making them waterproof or more water resistant
thanks to its impregnation action. To perform the proofing
cycle, proceed as follows:
• Pour a special waterproof cloth restorer in the drawer
•
compartment for fabric softener .
Reduce the laundry load to 1 kg.
To reach the best result with the waterproof re‐
viving action, dry the laundry in a tumble dryer
by setting the Outdoor drying programme.
Machine Clean
Maschinenreinigung
Maintenance cycle with hot water to clean and freshen the
drum and to remove residue that may cause odour. For the
best result use this cycle once a month. Before run this cy‐
cle, remove all items from the drum. In the washing phase
compartment of the detergent dispenser, put the flap of the
compartment in upward position. Pour a cup of chlorine
bleach or a washing machine cleaner in the washing phase
compartment. DO NOT use both together.
After the drum cleaning, run a further rinse cy‐
cle with empty drum and no detergent to re‐
move any residue of bleach.
1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the
drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.
2) If you set a Steam programme with dried laundry, at the end of the cycle the laundry can
be humid. Line dry the items for about 10 minutes.
3) Steam programme doesn't remove particularly intense odour.
www.electrolux.com
Programme temperature, maximum spin speed and maximum load
Programme
Default temper‐
ature
Temperature
range
Maximum spin speed
Spin speed range
Maximum
load
Cottons
40 °C
95 °C - Cold
1400 rpm
1400 rpm - 400 rpm
9 kg
Synthetics
40 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Delicates
40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Wool/Silk
40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
2 kg
Washing programmes
Steam programme
Steam
-
-
1.5 kg
Washing programmes
OKOPower
30 °C
60 °C - 30 °C
1400 rpm
1400 rpm - 400 rpm
5 kg
60 °C
1400 rpm
1400 rpm - 400 rpm
9 kg
20 min.-3 kg
30 °C
40 °C - 30 °C
1200 rpm
1200 rpm - 400 rpm
3 kg
Outdoor
30 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
2.5 kg1)
1 kg2)
60 °C
1200 rpm
1200 rpm - 400 rpm
-
Anti-allergy
Machine Clean
1) Washing programme.
2) Washing programme and waterproofing phase.
■
■
■
■
Machine Clean
Outdoor
■
20 min.-3 kg
■
Anti-allergy
■
OKOPower
Wool/Silk
■
Steam
Delicates
Spin
Synthetics
Programme options compatibility
Cottons
18
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Prewash
■
■
■
■
Extra Rinse
■
■
■
Only Rinse
■
■
■
Eco 2)
■
■
■
Time Save3)
■
■
■
Delay Start
■
■
■
Plus Steam
■
■
Soft Plus
■
■
■
Extra Silent
■
■
■
Only drain
■
■
Only Spin
■
Stains1)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
19
Machine Clean
Anti-allergy
■
■
Outdoor
OKOPower
■
Rinse Hold
Steam
Wool/Silk
■
Synthetics
■
Cottons
Delicates
20 min.-3 kg
ENGLISH
■
■
■
1) This option is not available with temperature lower than 40 °C.
2) This option is not available with a temperature lower than 30 °C.
3) If you set the shortest duration, we recommend that you decrease the load size. It is pos‐
sible to fully load the appliance, however the washing results can be less satisfactory.
7.2 Woolmark Apparel Care Green
The wool wash cycle of this machine has
been approved by The Woolmark
Company for the washing of wool
garments labelled as «hand wash»
provided that the garments are washed
according to the instructions issued by
the manufacturer of this washing
machine. Follow the garment care label
for drying and other laundry instructions.
M1361
In UK, Eire, Hong Kong and India the
Woolmark symbol is a certification
trademark.
20
www.electrolux.com
8. SETTINGS
8.1 Child Lock
To deactivate/activate the acoustic
With this option you can prevent that the
children play with the control panel.
•
To activate/deactivate this option,
touch the
and the
signals, touch the
and the
buttons simultaneously for about 6
seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
buttons
simultaneously until the indicator
comes on/goes off on the display.
You can activate this option:
•
•
After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
8.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
•
•
•
•
•
•
You activate the appliance (special
short tune).
You deactivate the appliance (special
short tune).
You touch the buttons (click sound).
You make a wrong selection (3 short
sounds).
The programme is completed
(sequence of sounds for about 2
minutes).
The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
8.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
•
To activate/deactivate this option
button and the
touch the
button simultaneously until the
indicator of the Extra Rinse button
comes on/goes off.
8.4 Soft Plus
Set the Soft Plus option to optimise the
fabric softener distribution and improve
the fabric softness.
This option increases slightly
the programme duration.
To activate/deactivate this option touch
the
button and the
button
simultaneously until the
indicator
comes on/goes off above the
indicator.
9. BEFORE FIRST USE
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by
.
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
ENGLISH
21
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.3 Filling the detergent and
additives
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Cotton programme .
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the cycle
duration.
10.2 Loading the laundry
1. Open the appliance door.
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
Compartment for prewash phase
an soak programme.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Compartment for stain remover.
Flap for powder or liquid detergent.
Always follow the
instructions that you find on
the packaging of the
detergent products, but we
recommend that you do not
exceed the maximum
indicated level (
). This
quantity will however
guarantee the best washing
results.
After a washing cycle, if
necessary, remove any
detergent residue from the
detergent dispenser.
10.4 Check the position of the
flap
1. Pull out the detergent dispenser until
it stops.
22
www.electrolux.com
2. Press the lever down to remove the
dispenser.
1
2
3. To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the flap
down.
With the flap in the
position DOWN:
• Do not use gelatinous
or thick liquid
detergents.
• Do not put more
liquid detergent than
the limit shown on in
the flap.
• Do not set the
prewash phase.
• Do not set the delay
start function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
10.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The
related programme indicator comes
on.
The indicator of the Start/Pause button
flashes.
The display shows the maximum
declared load for the programme, the
default temperature, the maximum spin
speed, the washing phase indicators
(when available) and an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators come on in the
ENGLISH
display and the given information
changes accordingly.
In case a selection is not
possible, no indicator
comes on and an acoustic
signal sounds.
10.6 Starting a programme
Touch the Start/Pause button to start the
programme.
The related indicator stops flashing and
stays on.
In the display, the indicator of the
operating phase starts flashing and the
maximum load indicator goes off.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
10.7 Starting a programme with
the delay start
1. Touch the Delay Start button
repeatedly until the display shows the
desired delay time. The indicator
comes on.
2. Touch the Start/Pause button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts.
The PROSENSE estimation
starts at the end of the
countdown.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows .
3. Touch the Start/Pause button again
to start the programme immediately.
23
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows the
desired delay time.
3. Touch the Start/Pause button again
to start the new countdown.
10.8 The ProSense load
detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Start/Pause button,
the maximum declared load indicator
goes off, the indicator
flashes, the
ProSense starts the laundry load
detection:
1. The appliance detects the load in the
and
first 30 seconds: the indicator
the time dots flash, the drum rotates
shortly.
2. At the end of the load detection, the
indicator
goes off and the time
dots stop flashing. The programme
duration will be adjusted accordingly
and could increase or decrease. After
further 30 seconds, the water filling
starts.
At the end of the load detection, in case
of drum overload, the indicator
flashing in the display:
is
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause button to start the
programme again. The ProSense phase
can be repeated up to three times (see
point 1).
Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
24
www.electrolux.com
10.10 Interrupting a programme
and changing the options
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
programme start, the
programme duration could
be adjusted depending on
the capacity of water
absorption of the fabrics.
When the programme is running, you
can change only some options:
1. Touch the button Start/Pause.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pause again.
The washing programme continues.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).
10.11 Cancelling a running
programme
10.9 Programme phase
indicators
When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
.
running:
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
.
During the washing cycle, the appliance
mixes the detergent, the stain removal
for fabric treatment and/or the fabric
softener with water before introducing
them into the drum; the indicator
appears and disappears on the display
according to the different programme
phases (the arrows flash alternatively).
MIX
If you select the Plus Steam the steam
phase indicators come on.
The steam phase is running:
The anti-crease phase is running:
.
.
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste. The display shows
the maximum duration of the
programme, updating it
about 20 minutes after the
starting of the new
programme.
10.12 Opening the door
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the button Start/Pause.
In the display the related door lock
indicator goes off.
2. Open the appliance door. if
necessary, add or remove the items.
ENGLISH
3. Close the door and touch the button
Start/Pause.
The programme or the delay start
continues.
10.13 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
•
•
•
1. If necessary, touch the Spin button to
decrease the spin speed proposed
by the appliance.
2. Touch the Start/Pause button:
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start/Pause button
goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off button to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
2.
3.
4.
5.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
Remove the laundry from the
appliance.
Make sure that the drum is empty.
Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
Close the water tap.
10.14 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
•
The display shows the indicator , the
option indicator
or
door locked indicator
and the
. The
indicator of the running phase
flashes.
25
The drum still turns at regular
intervals to prevent the creases in the
laundry.
The door stays locked.
You must drain the water to open the
door:
•
If you have set
, the appliance
drains the water and spins.
•
If you have set , the appliance
only drains the water.
The option indicator
or
goes out,
while the indicator
flashes and then
goes off.
3. When the programme is completed
and the door locked indicator
goes off, you can open the door.
4. Press the On/Off button a few
seconds to deactivate the appliance.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
10.15 Stand-by option
The Stand-by function automatically
deactivates the appliance to decrease
the energy consumption when:
•
•
You do not use the appliance for 5
minutes before you touch the Start/
Pause button.
Press the button On/Off to activate
the appliance again.
After 5 minutes from the end of the
washing programme
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
set programme.
Turn the programme dial to set a new
cycle.
If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
26
www.electrolux.com
11. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
11.1 The laundry load
•
•
•
•
•
•
•
•
•
•
•
•
Divide the laundry into: white,
coloured, synthetics, delicates and
wool.
Follow the washing instructions on the
laundry care labels.
Do not wash white and coloured items
together.
Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first couple of times.
Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
Empty pockets and unfold.
Turn multilayered fabrics, wool and
items with printed illustrations inside
out.
Pre-treat tough stains.
Wash heavy soil stains with a special
detergent.
Be careful with curtains. Remove the
hooks and put the curtains in a
washing bag or pillowcase.
Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights, etc. ).
A very small load can cause balance
problems with the spin phase leading
to excessive vibration. If this occurs:
a. interrupt the programme and
open the door (refer to "Opening
the door when a programme or
the delay start operates");
b. manually redistribute the load so
that the items are spaced evenly
around the tub;
c. press the Start/Pause button.
The spin phase continues.
11.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you pre-treat these
stains before you put the items in the
appliance.
Special stain removers are available.
Use the special stain remover that is
applicable to the type of stain and fabric.
11.3 Detergents and other
treatments
•
•
•
•
•
Only use detergents and other
treatments specially made for
washing machines:
– powder detergents for all types of
fabric,
– powder detergents for delicate
fabrics (40 °C max) and woollens,
– liquid detergents, preferably for
low temperature wash
programmes (60 °C max) for all
types of fabric, or special ones for
woollens only.
Do not mix different types of
detergents.
To help the environment, do not use
more than the recommended quantity
of detergent.
Follow the instructions that you find
on packaging of the detergents or
other treatments without exceeding
the indicated maximum level (
).
Use the recommended detergents for
the type and colour of the fabric, the
programme temperature and the level
of soil.
11.4 Ecological hints
•
•
•
•
Set a programme without the prewash
phase to wash laundry with normal
soil.
Always start a washing programme
with the maximum load of laundry
allowed.
If you pre-treat the stains, you can
use a stain remover when you set a
programme with a low temperature.
To use the correct quantity of
detergent, check the water hardness
of your domestic system. Refer to
"Water hardness".
11.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you
ENGLISH
use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to use
a water softener.
27
Use the correct quantity of water
softener. Follow the instructions that you
find on the packaging of the product.
To find out the water hardness in your
area, contact your local water authority.
12. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
12.1 External cleaning
Clean the appliance with mild soap and
warm water only. Fully dry all the
surfaces.
run a maintenance wash regularly (at
least once a month):
1. Remove all laundry from the drum.
2. Run a cotton programme with the
highest temperature with a small
quantity of powder detergent.
12.4 Door seal
CAUTION!
Do not use alcohol, solvents
or chemical products.
12.2 Descaling
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check
any limescale.
The regular detergents already contain
water softening agents, but we
recommend to run a cycle with empty
drum and a descaling product
occasionally.
Always follow the
instructions that you find on
the packaging of the
product.
12.3 Maintenance wash
The repeated and prolonged use of low
temperature programmes can cause
detergent deposits, fluff residues,
bacterial growth and biofilm formation
inside the drum and the tub. This could
generate bad odours and mildew.
To eliminate these deposits and
hygienize the inner part of the appliance,
Regularly examine the seal and remove
all objects from the inner part.
12.5 Cleaning the drum
Regularly examine the drum to prevent
rust particles.
For a complete cleaning:
1. Clean the drum with special products
for stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
2. Run a short cotton programme at
high temperature with empty drum
and with a small quantity of powder
detergent , in order to rinse out any
left residues.
12.6 Cleaning the detergent
dispenser
To prevent possible deposits of dried
detergent or clotted fabric softener
28
www.electrolux.com
and/or formation of mould in the
detergent dispenser drawer, once in a
while carry out the following cleaning
procedure:
1. Open the drawer. Press the catch
downwards as indicated in the
picture and pull it out.
1
2
4. Insert the detergent drawer into the
guide rails and close it. Run the
rinsing programme without any
clothes in the drum.
2. Remove the top part of the additive
compartment to aid cleaning and
flush it out under running warm
water, to remove any traces of
accumulated detergent. After
cleaning, replace the top part in its
position.
12.7 Cleaning the drain pump
WARNING!
Disconnect the mains plug
from the mains socket.
Regularly check the drain
pump filter and make sure
that it is clean.
3. Make sure that all detergent residue
is removed from the upper and lower
part of the recess. Use a small brush
to clean the recess.
Clean the drain pump if:
• The appliance does not drain the
water.
•
The drum does not turn.
•
The appliance makes an unusual
noise because of the blockage of the
drain pump.
The display shows the alarm code
•
.
ENGLISH
29
WARNING!
• Do not remove the filter
while the appliance
operates.
• Do not clean the pump if
the water in the appliance
is hot. Wait until the water
cools down
Proceed as follows to clean the pump:
1. Open the pump cover.
5. When the bowl is full of water, close
the drainage duct back and empty
the container.
6. Repeat the steps 4 and 5 until the
water stops to flow out.
2
2
1
1
2. Place a suitable bowl below the drain
pump access to collect the water that
flows out.
3. Squeeze the two levers and pull the
drainage duct forward to open it.
1
7. Close the drainage duct and turn the
filter anti-clockwise to remove it.
2
1
2
1
4. Let the water flow out.
8. If it is necessary, remove fluff and
objects from the filter recess.
9. Make sure that the impeller of the
pump can rotate. If it does not rotate,
contact the Authorised Service
Centre.
30
www.electrolux.com
2
1
10. Clean the filter under the water tap.
When you drain the water with the
emergency drain procedure, you must
activate the drain system again:
a. Put 2 litres of water in the main
wash compartment of the
detergent dispenser.
b. Start the programme to drain the
water.
12.8 Cleaning the inlet hose
and the valve filter
11. Put the filter back into the special
guides by turning it clockwise. Make
sure that you tighten the filter
correctly to prevent leakages.
2
It is recommended to clean both the
filters of the inlet hose and valve
occasionally to remove any deposit,
collected over the time:
1. Remove the inlet hose from the tap
and clean the filter.
1
1
2
3
12. Close the pump access.
2. Remove the inlet hose from the
appliance by loosening the ring nut.
ENGLISH
31
12.9 Emergency drain
If the appliance cannot drain the water,
carry out the same procedure, described
in 'Cleaning the drain filter' paragraph. If
necessary, clean the pump.
When you drain the water with the
emergency drain procedure, you must
activate the drain system again:
3. Clean the valve filter on the back of
the appliance with a toothbrush.
1. Put 2 litres of water in the main wash
compartment of the detergent
dispenser.
2. Start the programme to drain the
water.
12.10 Frost precautions
If the appliance is installed in an area
where the temperature can reach the
values around 0° C or drop below,
remove the remaining water from the
inlet hose and the drain pump.
4. When you reconnect the hose to the
back of the appliance, turn it left or
right (not in vertical position)
depending on the position of your
water tap.
45°
20°
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Put the two ends of the inlet hose in
a container and let the water flow out
of the hose.
4. Empty the drain pump. Refer to the
emergency drain procedure.
5. When the drain pump is empty,
install the inlet hose again.
WARNING!
Make sure that the
temperature is higher than 0
°C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 Introduction
The appliance does not start or it stops
during operation.
First try to find a solution to the problem
(refer to the table). If the problem
persists, contact the Authorised Service
Centre.
In case of major problems, the
acoustic signals operate, the display
shows an alarm code and the Start/
Pause button may flash continuously:
32
www.electrolux.com
•
- The appliance does not fill with
water properly.
•
- The mains supply is unstable.
Wait until the mains supply is stable.
•
- The appliance does not drain
the water.
•
•
- The appliance door is open or
not closed correctly. Please check the
door!
- No communication between
electronic elements of the appliance.
Switch it off and switch on again.
•
- The anti-flood device is on.
Disconnect the appliance and close
the water tap. Contact the Authorised
Service Centre.
If the appliance is
overloaded, remove
some items from the
drum and/or keep
pressed the door while
touching the Start/Pause
button until the indicator
WARNING!
Deactivate the appliance
before carrying out any
check.
stops flashing (see
the picture below).
13.2 Possible failures
Problem
Possible solution
The programme does
not start.
Make sure that the mains plug is connected to the mains
socket.
Make sure that the appliance door is closed.
Make sure that there is not a damaged fuse in the fuse
box.
Make sure that the Start/Pause has been touched.
If the delay start is set, cancel the setting or wait for the
end of countdown.
Deactivate the Child Lock function, if it is on.
The appliance does not Make sure that the water tap is open.
fill with water properly.
Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
ENGLISH
Problem
33
Possible solution
Make sure that the water tap is not clogged.
Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to 'Care and cleaning'.
Make sure that the water inlet hose has no kinks, damages
or bends.
Make sure that the connection of the water inlet hose is
correct.
The appliance fills with Make sure that the drain hose is in the correct position. The
water and drains imme‐ hose may be positioned too low (see 'Water drainage' para‐
diately.
graph).
The appliance does not Make sure that the sink spigot is not clogged.
drain the water.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the fil‐
ter, if necessary. Refer to 'Care and cleaning'.
Make sure that the connection of the drain hose is correct.
Set the drain programme if you set a programme without
drain phase.
Set the drain programme if you set an option which ends
with water in the tub.
The spin phase does
Set the spin programme.
not operate or the
washing cycle lasts lon‐
ger than usual.
Make sure that the drain filter is not clogged. Clean the fil‐
ter, if necessary. Refer to 'Care and cleaning'.
Adjust manually the items in the tub and start the spin
phase again. This problem may be caused by balance
problems.
There is water on the
floor.
Make sure that the couplings of the water hoses are tight
and there is not water leakages.
Make sure that the drain hose have no damages.
Make sure you use the correct detergent and the correct
quantity of it.
You cannot open the
appliance door.
Make sure that a washing programme that ends with water
in tub, has been selected.
Make sure that the washing programme is finished.
34
www.electrolux.com
Problem
Possible solution
Set the drain or the spin programme if there is water in the
drum.
Make sure that the appliance receives electrical power.
This problem may be caused by a failure of the appliance.
Contact the Authorised Service Centre. If you need to open
the door, please read carefully «Emergency door opening».
The appliance makes
an unusual noise and
vibrates.
Make sure the levelling of the appliance is correct. Refer to
'Installation'.
Make sure that the packaging and/or the transit bolts are
removed. Refer to 'Installation'.
Add more laundry in the drum. The load may be too small.
The programme dura‐
tion increases or de‐
creases during pro‐
gramme execution.
The ProSense function is able to adjust the programme du‐
ration according to the type and the amount of the laundry.
Refer to 'The ProSense load detection' in 'Daily Use' chap‐
ter.
The washing results are Increase the detergent quantity or use a different deter‐
not satisfactory.
gent.
Use special products to remove the stubborn stains before
you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
Too much foam in the
drum during the wash‐
ing cycle.
Reduce the quantity of detergent.
After the washing cycle,
there are some deter‐
gent residues in the dis‐
penser drawer.
Make sure that the flap is in the correct position (UP for
powder detergent - DOWN for liquid detergent).
Make sure you have used the detergent dispenser accord‐
ing the indications given in this user manual.
After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes. Deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.
13.3 Emergency door opening
In case of power failure or functioning
failure the appliance door remains
locked. The washing programme
continues when the power is restored. If
the door remains locked in case of
failure, it is possible to open it using the
emergency unlock function.
Before opening the door:
ENGLISH
35
1. Press the On/Off button to switch the
appliance off.
2. Disconnect the mains plug from the
mains socket.
3. Open the filter flap.
4. Keep the emergency unlock trigger
pulled downward and, at the same
time, open the appliance door.
CAUTION!
Risk of burns! Make sure
that the water temperature
is not too high and the
laundry is not hot. If
necessary, wait until they
cool down.
CAUTION!
Risk of injury! Make sure
that the drum is not
rotating. If necessary, wait
until the drum stops
rotating.
Make sure that the water
level inside the drum is
not too high. If necessary,
proceed with an
emergency drain (refer to
«Emergency drain» in
«Care and cleaning»
chapter).
5. Take out the laundry and then close
the appliance door.
6. Close the filter flap.
To open the door, proceed as follows:
14. CONSUMPTION VALUES
The data in this table are approximate. Different variables can affect the
data: the quantity and type of laundry, the water and ambient tempera‐
ture.
During the washing programme, the Prosense technology can vary the
wash duration and the consumption values. For more details see 'The
Prosense load detection' paragraph in 'Daily Use' chapter.
Programmes
Load
(kg)
Energy
con‐
sumption
(kWh)
Water
con‐
sumption
(litre)
Approxi‐ Remain‐
mate pro‐ ing mois‐
gramme ture (%)1)
duration
(minutes)
Baumwolle 60°C
9
1.55
87
220
52
Baumwolle 40°C
9
0.97
87
205
52
Pflegeleicht 40°C
4
0.72
55
155
35
Feinwäsche 40°C
4
0.60
59
89
35
Wolle/Seide 30°C
2
0.35
58
60
30
36
www.electrolux.com
Programmes
Load
(kg)
Energy
con‐
sumption
(kWh)
Water
con‐
sumption
(litre)
Approxi‐ Remain‐
mate pro‐ ing mois‐
gramme ture (%)1)
duration
(minutes)
Standard cotton programmes
Standard 60°C cotton
9
0.60
54
238
52
Standard 60°C cotton
4.5
0.37
39
191
52
Standard 40°C cotton
4.5
0.36
40
190
52
1) At the end of spin phase.
Off Mode (W)
Left On Mode (W)
0.30
0.30
The information given in the chart above is compliant with the EU Commission regu‐
lation 1015/2010 implementing directive 2009/125/EC.
15. TECHNICAL DATA
Dimension
Width/ Height/ Depth/
Total depth
600 mm/ 850 mm/ 630 mm/ 660
mm
Electrical connection
Voltage
Overall power
Fuse
Frequency
230 V
2200 W
10 A
50 Hz
Level of protection against ingress of solid parti‐ IPX4
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture
Water supply pressure Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply 1)
Cold water
Maximum Load
Cotton
Energy Efficiency Class
Spin Speed
9 kg
A+++
Maximum
1400 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
ENGLISH
37
16. ACCESSORIES
16.1 Available in
www.aeg.com/shop or from
authorised dealer
Only appropriate
accessories approved by
AEG ensure the safety
standards of the appliance. If
unapproved parts are used,
any claims will be
invalidated.
16.2 Connectivity
This washing machine has been
prepared upgradable by the Authorised
Service Centre for connectivity. Register
your washing machine at
www.registeraeg.com to receive
information when it will be possible to
enable the connectivity functionality.
The tumble dryer can be stacked on the
top of the washing machine only by
using the correct stacking kit
manufactured and approved by AEG.
Verify the compatible
stacking kit by checking the
depth of your appliances.
The stacking kit can be used only with
the appliances specified in the leaflet
provided with the accessory.
Read carefully the instructions supplied
with the appliance and with the
accessory.
WARNING!
Do not put the tumble dryer
under the washing machine.
16.5 Pedestal with the drawer
16.3 Fixing plate kit
If you install the appliance on a plinth,
secure the appliance in the fixing plates.
Read carefully the instructions supplied
with the accessory.
16.4 Stacking kit
To raise your appliance and makes
loading and unloading laundry easier.
The drawer can be used for laundry
storage e.g.: towels, cleaning products
and more.
Read carefully the instructions supplied
with the accessory.
38
17.
www.electrolux.com
CH
GUARANTEE
Customer Service Centres
Point of Service
Industriestrasse 10
5506 Mägenwil
Le Trési 6
1028 Préverenges
Via Violino 11
6928 Manno
Morgenstrasse 131
3018 Bern
Zürcherstrasse 204E
9000 St. Gallen
Seetalstrasse 11
6020 Emmenbrücke
St. Jakob-Turm Birsstrasse 320B
4052 Basel
Comercialstrasse 19
7000 Chur
Spare parts service Industriestrasse 10,
5506 Mägenwil, Tel. 0848 848 111
Specialist advice/Sale Badenerstrasse
587, 8048 Zürich, Tel. 044 405 81 11
Warranty For each product we provide a
two-year guarantee from the date of
purchase or delivery to the consumer
(with a guarantee certificate, invoice or
sales receipt serving as proof). The
guarantee covers the costs of materials,
labour and travel. The guarantee will
lapse if the operating instructions and
conditions of use are not adhered to, if
the product is incorrectly installed, or in
the event of damage caused by external
influences, force majeure, intervention by
third parties or the use of non-genuine
components.
18. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
marked with the symbol with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
*
For Switzerland:
Where should you take your
old equipment?
Anywhere that sells new
equipment or hand it in to
official SENS collection
points or official SENS
recycling firms.
The list of official SENS
collection points can be
found at www.erecycling.ch
ENGLISH
39
157005000-A-312016
www.electrolux.com/shop