Electrolux EW7W4742HS User Manual

EW7W4742HS
EN
Washer Dryer
User Manual
2
www.electrolux.com
CONTENTS
1. SAFETY INFORMATION....................................................................................3
2. SAFETY INSTRUCTIONS..................................................................................5
3. INSTALLATION.................................................................................................. 7
4. PRODUCT DESCRIPTION.............................................................................. 10
5. CONTROL PANEL........................................................................................... 10
6. DIAL AND BUTTONS....................................................................................... 12
7. PROGRAMMES............................................................................................... 15
8. SETTINGS........................................................................................................22
9. BEFORE FIRST USE....................................................................................... 23
10. DAILY USE - WASHING ONLY......................................................................23
11. DAILY USE - WASHING & DRYING.............................................................. 27
12. DAILY USE - DRYING ONLY......................................................................... 29
13. FLUFF IN THE FABRICS............................................................................... 30
14. HINTS AND TIPS........................................................................................... 30
15. CARE AND CLEANING..................................................................................32
16. TROUBLESHOOTING....................................................................................36
17. CONSUMPTION VALUES..............................................................................41
18. TECHNICAL DATA.........................................................................................41
19. ACCESSORIES..............................................................................................42
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
ENGLISH
3
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the
result of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety- Gulf
Market
WARNING!
Risk of suffocation, injury or permanent
disability.
•
•
•
•
•
•
•
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
Do not change the specification of this appliance.
4
www.electrolux.com
•
•
•
•
•
•
•
•
•
•
•
•
•
The appliance shall be installed as a freestanding
product or below the kitchen worktop if space margins
permit.
Do not install the appliance behind a lockable door, a
sliding door or a door with a hinge on the opposite
side, that would prevent the appliance door from being
fully open.
Connect the mains plug to the mains socket only at
the end of the installation process. Make sure that the
mains plug is accessible after installation.
The ventilation opening in the base must not be
covered by a carpet, mat, or any floor covering.
Ensure good air ventilation in the room where the
appliance is installed to avoid the backflow of
unwanted gases into the room from appliances
burning gas or other fuels, including open fires.
Exhaust air must not be discharged into a flue which is
used for exhausting fumes from any appliances
burning gas or other fuels.
The operating water pressure at the water entry point
from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
Do not exceed the maximum load of 7 kg (refer to the
"Programme chart" chapter).
The appliance must be connected to the water mains
using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Wipe away lint or packaging debris that has
accumulated around the appliance.
Items that have been soiled with substances such as
vegetable or mineral oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes and wax
ENGLISH
•
•
•
•
•
•
•
•
•
•
5
removers should be washed separately with an extra
amount of detergent before being dried in the washer
dryer.
Do not use the appliance if items have been soiled
with industrial chemicals.
Do not dry unwashed items in the wash dryer.
Items such as foam rubber (latex foam), shower caps,
waterproof textiles, and rubber backed articles and
clothes, or pillows fitted with foam rubber pads should
not be dried in the washer dryer.
Fabric softeners, or similar products, should only be
used as specified by the product manufacturer’s
instructions.
Remove all objects from items that could be a source
of fire ignition such as lighters or matches.
Never stop the washer dryer before the end of the
drying cycle unless all items are quickly removed and
separated so that residual heat can dissipate.
The final part of the washer dryer cycle takes place
without heat (cool down cycle) to ensure that items
reach a temperature that will not cause damage to
them.
Do not use high pressure water sprays and/or steam
to clean the appliance.
Clean the appliance with a moist cloth. Use only
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply
with relevant national
regulations.
•
Follow the installation instructions
supplied with the appliance.
•
•
•
Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
Always keep the appliance vertical
when it is being moved.
Make sure that there is air circulation
between the appliance and the floor.
6
www.electrolux.com
•
•
•
•
•
•
•
•
Remove all the packaging and the
transit bolts.
The floor area on which the appliance
is to be installed must be flat, stable,
heat resistant and clean.
Keep the transit bolts in a safe place.
If the appliance is to be moved in the
future they must be reattached to lock
the drum to prevent an internal
damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not install or use a damaged
appliance.
Do not install the appliance where the
appliance door cannot be fully
opened.
Adjust the feet to have the necessary
space between the appliance and the
flooring.
When the appliance is in its
permanent position, check if it is
levelled correctly with the aid of a
spirit level. If it is not, adjust the feet
accordingly.
2.2 Electrical Connection
WARNING!
Risk of fire and electric
shock.
•
•
•
•
•
•
The appliance must be earthed.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Do not touch the mains cable or the
mains plug with wet hands.
This appliance complies with the
E.E.C. Directives.
2.3 Water Connection
•
•
Do not cause damage to the water
hoses.
Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
•
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
2.4 Use
WARNING!
Risk of injury, electric shock,
fire, burns or damage to the
appliance.
•
•
•
•
•
•
•
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not touch the glass door while a
programme is in operation. The glass
can get hot.
Do not dry damaged (torn, frayed)
items that contain padding or fillings.
If laundry has been washed with a
stain remover, carry out an additional
rinse cycle before starting a drying
cycle.
Make sure that all metal objects are
removed from the laundry.
Only dry fabrics that are suitable to
dry in the washer dryer. Follow the
cleaning instruction on the item label.
Plastic items are not heat resistant.
– If a detergent ball is used, remove
it before starting a drying
programme.
– Do not use a detergent ball if
setting a non-stop programme.
WARNING!
Risk of injury or damage to
the appliance.
•
•
Do not sit or stand on the open door.
Do not dry dripping wet clothes in the
appliance.
2.5 Disposal
•
•
•
•
Disconnect the appliance from the
mains electrical and water supplies.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
ENGLISH
7
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Unpacking
1. Remove the external film. If necessary,
use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Open the door. Remove all the items
from the drum .
4. Put the front polystyrene packaging
element on the floor under the appliance.
Carefully put down the appliance onto its
rear side.
5. Remove the polystyrene protection from
the bottom. Put the appliance back into an
upright position.
6. Remove the power supply cable and the
drain hose from the hose holders.
1
2
It is possible to see water flowing from the
drain hose. This is because the washing
machine has been tested at the factory.
8
www.electrolux.com
7. Remove the three transit bolts and pull
out the plastic spacers.
8. Put the plastic caps, that you find in the
user manual bag, in the holes.
3.2 Information for installation
1. Connect the water inlet hose to the
back of the appliance.
Positioning and levelling
Adjust the appliance correctly to prevent
vibration, noise and movement of the
appliance when it operates.
1. Install the appliance on a flat hard
floor. The appliance must be levelled and
stable. Make sure that the appliance
does not touch the wall or other units and
there is air circulation below the
appliance.
45
20
O
O
2. Loosen or tighten the feet to adjust the
level. All feet must rest firmly on the floor.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
The inlet hose
CAUTION!
Make sure there is no
damage to hoses and there
are no leaks from the
couplings. Do not use an
extension hose if the inlet
hose is too short. Contact
the service centre for a
replacement inlet hose.
2. Position it toward left or right
depending on the positon of the water
tap. Make sure that the inlet hose is not
in vertical position.
3. If necessary, loosen the ring nut to set
it in the correct position.
4. Connect the water inlet hose to the
cold water tap with 3/4'' thread.
Water drainage
The drain hose should stay at a height of
no less than 60 cm and not more than
100 cm.
You can extend the drain
hose to maximum 400 cm.
Contact the authorised
service centre for the other
drain hose and the
extension.
ENGLISH
It is possible to connect the drain hose in
different ways:
Refer to the illustration.
1. Make a U shape with the drain hose
and put it around the plastic hose guide.
2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm min. 1.5") must be larger
than the external diameter of
the drain hose.
5.Without the plastic hose guide, to a
sink spigot- Put the drain hose in the
spigot and tighten it with a clamp. Refer
to the illustration.
Make sure that the plastic
guide cannot move when the
appliance drains and the
drain hose end is not
immersed in the water.
There may be a return of
dirty water into the
appliance.
3. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
4. To a stand pipe with vent-hole - Insert
the drain hose directly into a drain pipe.
Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.
6. Position the hose directly to a built-in
drain pipe in the room wall and tighten it
with a clamp.
9
10
www.electrolux.com
4. PRODUCT DESCRIPTION
4.1 Appliance overview
1
2
8
3
9
10
4
5
11 12
6
7
1
2
3
4
5
6
7
Worktop
Detergent dispenser
Control panel
Door handle
Rating plate
Drain pump filter
Feet for levelling the appliance
8
9
10
11
12
Drain hose
Inlet hose connection
Mains cable
Transit bolts
Hose support
5. CONTROL PANEL
5.1 Special features
Your new washer-dryer meets all modern
requirements for effective treatment of
laundry with low water, energy and
detergent consumption and detergent
consumption and proper care of fabric.
•
•
•
FreshScent System, thanks to new
FreshScent steam programme, offers
the perfect solution for refreshing
even the most delicate garments
without washing. Use the delicate
fragrance exclusively developed by
ELECTROLUX to add a pleasant
feeling of "just-washed" garment to
the removing odours and wrinkles
action.
Thanks to the Soft Plus option, the
fabric softener is uniformly spread out
in the laundry and deeply penetrates
the fabric fibres favouring a perfect
softness.
The SensiCare System detects the
laundry load size defining the
programme duration in 30 seconds.
The washing programme is tailored to
the laundry load and the type of fabric
without consuming more time, energy
and water than necessary.
ENGLISH
5.2 Control panel description
12
The permanent options are
set by holding pressed the
relative button for at least 3
seconds.
1
2
3
4
5
3
2
1
Programme dial
Display
Auto Dry touch button
Time Dry touch button
Start/Pause touch button
Delay
Start touch button
6
7 Time Manager touch button and
permanent Child Lock option
5.3 Display
Door locked indicator.
11 10
9
8
4
5
7
6
8 Prewash touch button and
permanent Extra Rinse option
9 Spin touch button
10 Temp. touch button
11 Mode touch button:
•
Wash
•
Dry
12 On/Off push button
11
12
www.electrolux.com
The digital indicator can show:
• Programme duration (e. g.
phase).
•
Delay time (e. g.
•
Cycle end (
•
Warning code (e.g.
•
Error indicator (
, washing and/or drying
).
).
).
).
Time Manager indicator.
Extra Rinse indicator.
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
Rinse Hold indicator.
After the SensiCare System detection, it flashes when the
laundry load exceeds the maximum declared load of the selec‐
ted programme. Refer to "The SensiCare System load detec‐
tion " paragraph.
Auto Dry indicator:
Iron dry
Cupboard dry
Extra dry
Child safety lock indicator.
Time Dry indicator.
6. DIAL AND BUTTONS
6.1 Introduction
The options/functions are
not available with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set incompatible options/
functions.
6.2 On/Off
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy
consumption, you may need to activate
the appliance again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
ENGLISH
6.3 Mode
Thanks to this button, a cycle can
perform:
• Only washing: Wash indicator is on
(default mode).
• Washing and drying: Wash and Dry
indicators are on.
• Only drying: Dry indicator is on.
6.4 Temp.
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Tap on this button to change the water
temperature.
The indicator of the set temperature
comes on.
The indicator Cold corresponds to cold
water.
6.5 Spin
13
If you touch the Start/Pause
button, the appliance performs the
spinning phase and drains the water.
The appliance empties
the water out
automatically after 18
hours approximately.
6.6 Prewash
With this option you can add a prewash
phase to a washing programme.
The corresponding indicator above the
touch button illuminates.
•
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust, mud and other
solid particles.
The options can increase the
programme duration.
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed, except for
programme Denim. With this option you
can decrease the default spin speed.
6.7 Permanent Extra Rinse
Touch repeatedly this button to:
• Decrease the spin speed. The
display shows only the spin speeds
available for the set programme.
• Additional spin options No Spin
To activate/deactivate this option, hold
the Prewash button pressed for 3
.
Set this option to deactivate all spin
phases. The appliance performs the
only draining phase of the selected
washing programme. Set this option
for very delicate fabrics. The rinses
phase uses more water for some
washing programmes
•
Activate the Rinse Hold
option.
The final spin is not performed. The
water of the last rinse is not drained
out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum.
The indicator
is on display. The
door stays locked and the drum turns
regularly to reduce creasing. You
must drain the water to unlock the
door.
With this option you can permanently
have an extra rinse when you set a new
programme.
seconds until the indicator
goes off on the display.
comes on/
When it is activated, the appliance will
default to this option after you switch it
off or change/reset the programme.
This option increases the
programme duration.
6.8 Time Manager
With this option you can reduce the
programme duration depending on the
load size and the degree of soiling.
When you set a washing programme, the
display shows the default duration and
dashes.
Touch Time Manager button to reduce
the programme duration according to
www.electrolux.com
your needs. The display shows the new
programme duration and a number of
dashes will decrease accordingly:
suitable for a full load of normally
soiled garments.
a quick cycle for a full load of lightly
soiled garments.
very quick cycle for a smaller lightly
soiled load (max. half load
recommended).
the shortest cycle to freshen up a
small amount of laundry.
The Time Manager is available only with
the programmes in the table.
To activate/deactivate this option, hold
the Time Manager button pressed until
the indicator
the display.
comes on/goes off on
When it is activated, the appliance will
default to this option after you switch it
off or change/reset the programme. If
you press any button, the indicator
blinks to indicate that the buttons are
disabled.
6.10 Time Dry
Touch this button to set the time that
suits the fabrics you have to dry (refer to
"Timed drying" table). The display shows
the set value.
Each time you touch this button the time
value increases by 5 minutes.
Cotton Eco
Synthetics
indicator
Cotton
14
■
■
■
■
■
■
■
■
■
On the display the relevant dryness
indicator goes on:
■
■
■
•
Iron dry: laundry to be ironed.
■
■
■
•
Cupboard dry: laundry to be put
in store.
1)
1) Default duration for all programmes.
Time Manager with steam
programmes
When setting a steam programme, this
button allows to chose three steam levels
and the programme duration is reduced
accordingly:
•
: maximum.
•
: medium.
•
: minimum.
6.9 Child Lock
With this option you can prevent children
from playing with the control panel.
You cannot set all time
values for different types of
fabrics.
6.11 Auto Dry
Touch this button to set one the
automatic dryness levels proposed by
the appliance.
•
Extra dry: laundry to be fully dried.
You can not set all
automatic levels for each
type of fabrics.
6.12 Delay Start
With this option you can delay the start of
a programme to a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases in
steps of 1 hour up to 20 hours.
The corresponding indicator above the
touch button illuminates.
The display shows the selected delay
time. After touching the Start/Pause
ENGLISH
button, the appliance begins the
countdown and the door is locked.
15
6.13 Start/Pause
Touch the Start/Pause
button to
start, pause the appliance or interrupt a
running programme.
7. PROGRAMMES
7.1 Programme Chart
Programme
Default tempera‐
ture
Temperature
range
Refer‐
ence spin
speed
Spin
speed
range
Maxi‐
mum
load
Programme description
(Type of load and soil level)
Washing programmes
Cotton
40 °C
90 °C - Cold
Cotton Eco1)
40 °C
60 °C - 40 °C
Synthetics
40 °C
60 °C - Cold
Delicates
40 °C
40 °C - Cold
Wool
40 °C
40 °C - Cold
1400 rpm
(1400400 rpm)
7 kg
White cotton and coloured cotton. Nor‐
mal, heavy and light soil.
1400 rpm
(1400400 rpm)
7 kg
White cotton and fast-coloured cotton.
Normal soil. The energy consumption de‐
creases and the time of the washing pro‐
gramme is extended, ensuring good wash‐
ing results.
1200 rpm
(1200 400 rpm)
3 kg
Synthetic items or mixed fabric items.
Normal soil.
1200 rpm
(1200400 rpm)
3 kg
Delicate fabrics such as acrylics, vis‐
cose and mixed fabrics requiring gentler
washing. Normal soil.
1.5 kg
Machine washable wool, hand washable
wool and other fabrics with «hand wash‐
ing» care symbol2).
1200 rpm
(1200 400 rpm)
16
www.electrolux.com
Programme
Default tempera‐
ture
Temperature
range
Refer‐
ence spin
speed
Spin
speed
range
Maxi‐
mum
load
Programme description
(Type of load and soil level)
Steam programme
with FreshScent System
Steam programme can be used for reducing wrinkles and odours3) of garments that
just need to be refreshed, avoiding washing. The fabric fibres are relaxed and after‐
wards ironing becomes effortless. When the programme is completed, quickly re‐
move the laundry from the drum4). Steam programmes do not perform any hygienic
cycle. Do not set one of these programmes with the following type of items:
• Items that are not suitable for tumble drying.
• All items with plastic, metal, wooden parts or alike.
ELECTROLUX fragrance. If you use this special gentle fragrance, your laundry will
scent as just washed: pour a single dose bottle in the compartment
and simply
start a steam programme. Reduce the fragrance dosage when treating smaller load.
By means of the Time Manager button, you can reduce the programme duration
when treating items labeled to be washed at low temperature.
DO NOT:
• Tumble dry the garments treated with fragrance. Its benefit would evaporate.
• Use the fragrance with different purposes than those here described.
• Use the fragrance on new garments. New garments may contain residual finishing
compounds which are not compatible with it.
The fragrance dose bottles are available on ELECTROLUX web shop or
by authorised dealer.
1 kg
FreshScent
-
Cottons, Synthetics, Delicates. Short and
gentle steam programme to refresh even
your very delicate garments, including very
delicate garments with sequins, lace etc.
When treating smaller loads, the pro‐
gramme duration can be further reduced by
means of the Time Manager option.
WARNING!
Do not use this programme
with wool and garments label‐
led as dry-clean only.
Spin/Drain
1400 rpm
(1400 400 rpm)
7 kg
To spin the laundry and to drain the water in
the drum. All fabrics, except woollens
and delicate fabrics.
ENGLISH
Programme
Default tempera‐
ture
Temperature
range
Rinse
Machine Clean
60 °C
Refer‐
ence spin
speed
Spin
speed
range
1400 rpm
(1400400 rpm)
Maxi‐
mum
load
7 kg
1200 rpm
(1200 400 rpm)
-
17
Programme description
(Type of load and soil level)
All fabrics, except woollens and very
delicate fabrics. Programme for rinsing
and spinning the laundry. The default spin
speed is the one used for cotton pro‐
grammes. Reduce the spin speed accord‐
ingly to the type of laundry. If necessary, set
the Extra Rinse option to add rinses. With a
low spin speed, the appliance performs deli‐
cate rinses and a short spin.
Maintenance cycle with hot water to clean
and freshen the drum and to remove resi‐
due that may cause odour. For the best re‐
sult use this cycle once a month. Before
running this cycle, remove all items from the
drum. In the washing phase compartment of
the detergent dispenser, put the flap of the
compartment in upward position. Pour a
cup of chlorine bleach or a washing ma‐
chine cleaner in the washing phase com‐
partment. DO NOT use both together.
After the drum cleaning, run a
further rinse cycle with empty
drum and no detergent to re‐
move any residue of bleach.
If you set this programme with the Dry, the
appliance performs the anti-fluff action. Re‐
fer to chapter 'Fluff in the fabrics'.
Anti-Allergy
60 °C
Sportswear
30 °C
40 °C - Cold
1400 rpm
(1400 400 rpm)
7 kg
White cotton items. This programme re‐
moves micro-organisms thanks to a wash‐
ing phase with the temperature maintained
above 60°C for several minutes. This helps
remove germs, bacteria, micro-organism
and particles. An additional rinsing phase
ensures a proper removal of detergent resi‐
dues and pollens/allergenic items. In this
way the wash is more effective.
1200 rpm
(1200400 rpm)
3 kg
Synthetic sport items. This programme is
designed to gently wash modern outdoor
sportswear and is also suitable for gym, cy‐
cling or jogging clothes or similar.
18
www.electrolux.com
Programme
Default tempera‐
ture
Temperature
range
Outdoor
30 °C
40 °C - Cold
Refer‐
ence spin
speed
Spin
speed
range
1200 rpm
(1200400 rpm)
Maxi‐
mum
load
2 kg
Programme description
(Type of load and soil level)
Do not use fabric softener and
make sure that there is no soft‐
ener residue in the detergent
dispenser.
Outdoor clothing, technical, sport fab‐
rics, waterproof and breathable jackets,
shell jackets with a removable fleece or
inner insulation.
By performing a non-stop wash
and dry programme, the drying
phase also acts as water-repel‐
lent restorer. Make sure that
the garment care label permits
tumble drying.
Denim
30 °C
40 °C - Cold
OneGo 1h 1kg
30 °C
40 °C - 30 °C
1200 rpm
(1200 400 rpm)
3 kg
Special programme for Denim clothing
with delicate washing phase to minimize
colour fading and marks. For better care
a reduced load size is recommended.
1200 rpm
(1200 400 rpm)
1 kg
Mixed fabrics (cotton and synthetic
items). Complete short programme to wash
and dry laundry loads up to 1 kg in one go.
It only lasts 1 hour.
Reset position. The display shows dashes only.
1) This programme at 60 °C with a load of 7 kg is the reference programme for energy label
data, in compliance with UAE. S 5010 2:2013.
2) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the
drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.
3) Steam programme doesn't remove particularly intense odour.
4) After the steam treatment the laundry can be humid. Hang items out for a few minutes.
ENGLISH
19
Programme options compatibility
Delicates
Wool
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Prewash
Delay Start
Synthetics
Time Manager
Cotton Eco
No Spin
Cotton
Spin
Programme
■
■
FreshScent
Spin/Drain
Rinse
Machine Clean
Anti-Allergy
Sportswear
Outdoor
Denim
■
■
■
■1)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
OneGo 1h 1kg
1) If you set the No Spin option, the appliance performs draining only.
■
20
www.electrolux.com
7.2 Woolmark Apparel Care Blue
•
The wool wash cycle of this machine
has been approved by The Woolmark
Company for the washing of wool
garments labelled as "hand wash"
provided that the products are
washed according to the instructions
on the garment label and those issued
by the manufacturer of this washing
machine. M1664
• The wool drying cycle of this machine
has been tested and approved by The
Woolmark Company. The cycle is
suitable to dry wool garments which
are labelled "hand wash" provided
that the garments are washed in a
Woolmark endorsed hand washing
cycle and dried according to the
instructions issued by the
manufacturer. M1664
In UK, Eire, Hong Kong and India the
Woolmark symbol is a certification
trademark.
7.3 Automatic drying
Dryness Level
1)
Extra Dry
For towelling materials
Type of fabric
Load
Cottons and Linen
(bathrobes, bath towels,
etc)
up to 4 kg
Denim garments
up to 3 kg
ENGLISH
Dryness Level
1)
Cupboard Dry
For items to be stored
Iron Dry
Suitable for ironing
Type of fabric
Load
Cottons and Linen
(bathrobes, bath towels,
etc)
up to 4 kg
Synthetics and mixed
fabrics
(jumpers, blouses, under‐
wear, household and bed
linen)
up to 3 kg
Delicate fabrics
(acrylics, viscose and deli‐
cate mixed fabrics)
up to 2 kg
Wool items
(woollen jumpers)
up to 1 kg
Outdoor sporting gar‐
ments
(Outdoor clothing, techni‐
cal, sport fabrics, water‐
proof and breathable jack‐
ets, shell jackets)
up to 2 kg
Denim garments
up to 3 kg
Sportswear
up to 3 kg
Cottons and Linen
(sheets, tablecloths, shirts,
etc)
up to 4 kg
1) Also available with Anti-Allergy and Cotton Eco programme.
7.4 Timed drying
Dryness Level Type of fabric
Extra Dry
For towelling
materials
Cottons and Linen
(bathrobes, bath towels, etc)
Denim garments
Load Spin Suggested
(kg)
spee duration
d
(mins)
(rpm)
4
1400
190 - 210
2
1400
105 - 120
1
1400
60 - 70
3
1200
155
21
22
www.electrolux.com
Dryness Level Type of fabric
Load Spin Suggested
(kg)
spee duration
d
(mins)
(rpm)
Cupboard Dry Cottons and Linen
For items to be (bathrobes, bath towels, etc)
stored
Iron Dry
Suitable for
ironing
4
1400
180 - 200
2
1400
95 - 110
1
1400
50 - 60
Synthetics and mixed fabrics
(jumpers, blouses, underwear,
household and bed linen)
3
1200
130 - 145
1
1200
45 - 55
Delicates
(acrylics, viscose and delicate mixed
fabrics)
2
1200
150
Wool
(woollen jumpers)
1
1200
170 - 190
Outdoor sporting garments
(Outdoor clothing, technical, sport
fabrics, waterproof and breathable
jackets, shell jackets)
2
1200
160
Denim garments
3
1200
145
Sportswear
3
1200
140
Cottons and Linen
(sheets, tablecloths, shirts, etc)
4
1400
115 - 130
2
1400
65 - 75
1
1400
40 - 50
8. SETTINGS
8.1 Acoustic signals
This appliance has different acoustic
signals, that operate when:
•
•
•
•
•
•
You activate the appliance (special
short tune).
You deactivate the appliance (special
short tune).
You touch the buttons (click sound).
You make an invalid selection (3 short
sounds).
The programme is completed
(sequence of sounds for about 2
minutes).
The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To activate/deactivate the acoustic
signals when the programme is
completed, touch the Mode and the
Temp. buttons simultaneously for about
2 seconds. The display shows On or Off.
If you deactivate the
acoustic signals, they
continue to operate when
the appliance has a
malfunction.
ENGLISH
23
9. BEFORE FIRST USE
1. Make sure that the electrical power is
available and the water tap is open.
2. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
3. Pour a small quantity of detergent
into the compartment marked by
4. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
.
10. DAILY USE - WASHING ONLY
WARNING!
Refer to Safety chapters.
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds.
10.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Do not put too much laundry in the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
gets caught between the
seal and the door to avoid
risk of water leakage and
damage to the laundry.
Washing heavily oiled,
greasy stains could cause
damage to rubber parts of
the washing machine.
10.3 Filling the detergent and
additives
- Compartment for prewash
phase, soak programme or stain re‐
mover.
- Compartment for washing
phase.
24
www.electrolux.com
- Compartment for fabric softener
and other liquid treatments(fabric condi‐
tioner, starch).
- Maximum level for quantity of
liquid additives.
gent.
- Flap for powder or liquid deter‐
Always follow the
instructions that you find on
the packaging of the
detergent products, but we
recommend that you do not
exceed the maximum
indicated level (
). This
quantity will however
guarantee the best washing
results.
After a washing cycle, if
necessary, remove any
detergent residue from the
detergent dispenser.
With the flap in the position DOWN:
• Do not use gelatinous or thick
liquid detergents.
• Do not exceed to liquid detergent
dose indicated on the flap.
• Do not set the prewash phase.
• Do not set the delay start function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
10.4 Check the position of the
detergent flap
1. Pull out the detergent dispenser until
it stops.
Make sure that the flap does not cause a
blockage when you close the drawer.
10.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme.
The indicator of Wash button illuminates.
2. Press the lever down to remove the
dispenser.
3. To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the flap
down.
The indicator of the Start/Pause
button flashes.
The display shows an indicative
programme duration and the maximum
load.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators illuminate on the
ENGLISH
display and the given information
changes accordingly.
If a selection is not possible
an acoustic signal sounds
and the display shows
.
10.6 Starting a programme
Touch the Start/Pause
button to start
the programme. It is not possible to start
the programme when the indicator of the
button is off and doesn't flash (e.g. the
door is open).
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
10.7 Starting a programme with
the delay start
1. Touch the Delay Start button
repeatedly until the display shows the
desired delay time. The related
indicator comes on.
2. Touch the Start/Pause
button.
The appliance door locks and starts
the countdown of the delay start. The
25
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pause
button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows the
desired delay time.
3. Touch the Start/Pause
button
again to start the new countdown.
10.8 The SensiCare System
load detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Start/Pause
button, the SensiCare System starts the
laundry load detection:
1. The appliance detects the load in the
first 30 seconds. During this phase
placed
the Time Manager bars
below the time digits play a simple
animation, the drum rotates shortly.
2. The programme duration will be
adjusted accordingly and could
increase or decrease. After further 30
seconds, the water filling starts.
At the end of the load detection, in case
display shows the indicator
.
When the countdown is completed, the
programme starts automatically.
of drum overload, the indicator
flashing in the display:
Cancelling the delay start after
the countdown has started
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
To cancel the delay start:
Once removed the exceeding garments,
1. Touch the Start/Pause
button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows .
3. Touch the Start/Pause
button
again to start the programme
immediately.
is
touch the Start/Pause
button to start
the programme again. The SensiCare
phase can be repeated up to three times
(see point 1).
Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
this case, it will be not possible to
guarantee the best washing results.
26
www.electrolux.com
About 20 minutes after the
programme start, the
programme duration could
be adjusted again depending
on the capacity of water
absorption of the fabrics.
The SensiCare detection is
carried out with complete
washing programmes only
and if the programme
duration has not been
reduced by means of the
Time Manager button.
If the SensiCare System has
completed and the water
filling has already started,
the new programme starts
without repeating the
SensiCare System. The
water and the detergent are
not drained out in order to
avoid waste. The display
shows the maximum
duration of the programme,
updating it about 20 minutes
after the starting of the new
programme.
10.9 Interrupting a programme
and changing the options
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the "Reset"
When the programme is running, you
can change only some options:
position .
2. Wait for 1 second. The display shows
button.
1. Touch the Start/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause
button
again.
The washing programme continues.
To start the programme
again make sure that the
programme dial is correctly
positioned on the interrupted
programme and the indicator
of the Start/Pause
is flashing.
button
10.10 Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to
activate the appliance.
.
Now, you can set a new washing
programme.
10.11 Opening the door Adding garments
If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you should not
open the door.
While a programme or the delay start
operates, the appliance door is locked.
The display shows the indicator
.
1. Touch the button Start/Pause
.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
Close the door and touch the Start/
button.
Pause
The programme or the delay start
continues.
10.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
ENGLISH
2. Press the Start/Pause
button: the
appliance drains the water and spins.
The indicator of the Start/Pause
button goes off.
The option indicator Rinse Hold
disappears.
The door unlocks and the indicator
goes off.
1. Press button On/Off to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
2.
3.
4.
5.
When you activate the
appliance again, the display
shows the end of the
previous programme. Turn
the programme dial to set a
new cycle.
Remove the laundry from the
appliance.
Make sure that the drum is empty.
Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
Close the water tap.
10.13 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
•
The time area shows
and the
display shows the door locked
•
•
•
•
.
The indicator of the Start/Pause
button starts flashing.
The drum still turns at regular
intervals to prevent creases in the
laundry.
The door stays locked.
You must drain the water to open the
door:
If you have selected No Spin
, the appliance will
only drain the water.
3. When the programme is completed
and the door locked indicator
goes off, you can open the door.
4. Press the On/Off button for a few
seconds to deactivate the appliance.
10.14 Stand-by function
The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption when:
•
You do not use the appliance for 5
minutes when no programme is
running.
Press the button On/Off to activate
the appliance again.
• 5 minutes after the end of the washing
programme.
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
programme.
Turn the programme dial to set a new
cycle.
If the dial is rotated to the "Reset"
position , the appliance automatically
turns off in 30 seconds.
If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
1. If necessary, touch the Spin button to
decrease the spin speed proposed
by the appliance.
11. DAILY USE - WASHING & DRYING
WARNING!
Refer to Safety chapters.
27
This appliance is an
automatic washer dryer.
28
www.electrolux.com
11.1 NON-STOP programme Wash and dry
Not all programmes are
compatible with drying
function. The OneGo 1h 1kg
programme is already a
complete wash&dry
programme.
You can wash and dry your laundry
setting a «non stop-programme».
Proceed as follows:
1. Press the On/Off button for some
seconds to activate the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The appliance
defaults to the washing only mode
and the indicator of the Wash button
is on. The display shows the default
temperature and spin. If necessary,
change them according to your
laundry.
5. Set the desired options, if there are
available.
6. Tap on the Mode button once to
activate also the drying function. Both
indicators of the Wash and Dry
buttons are on. The indicator
appears on the display.
11.2 Washing and Drying Automatic levels
1. Tap on the Auto Dry button
repeatedly until the display shows the
required dryness level. The indicators
in the display illuminate accordingly:
a.
Iron dry: for cotton items;
b.
Cupboard dry: for cotton and
synthetic items;
c.
Extra dry: for cotton items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pause
to start
the programme. The SensiCare
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
11.3 Washing and Timed
Drying
1. Tap on the Time Dry button
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator
goes off and
the indicator
comes on.
Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Start/Pause
button to
start the programme. The SensiCare
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
11.4 At the end of the drying
programme
•
•
The appliance stops automatically.
The acoustic signals operate (if they
are active).
•
In the display
•
The indicator of the Start/Pause
•
comes on.
button goes off. The door locked
indicator goes off and the door
unlocks.
Press the On/Off button for some
seconds to deactivate the appliance.
ENGLISH
After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.
1. Remove the laundry from the
appliance.
29
2. Make sure that the drum is empty.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
12. DAILY USE - DRYING ONLY
WARNING!
Refer to Safety chapters.
2. Touch the Start/Pause
start the programme.
This appliance is an
automatic washer dryer.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
12.1 Preparation to drying
1. Press the On/Off button for some
seconds to activate the appliance.
2. Load the laundry one item at a time.
3. Turn the programme dial to the
programme suitable for the items to
dry. The appliance defaults to the
washing only mode and the indicator
of the Wash button is on.
4. Tap on the Mode button twice to
perform drying only. The indicator of
Dry button illuminates and the
indicator of Wash button goes off.
When drying a big amount of
laundry, to have good drying
performances, make sure
that the laundry itself is not
rolled up and that is
uniformly distributed in the
drum.
12.2 Drying - Automatic levels
1. Tap on the Auto Dry button
repeatedly until the display shows the
required dryness level. The indicators
in the display illuminate accordingly:
a.
Iron dry: for cotton items;
b.
Cupboard dry: for cotton and
synthetic items;
c.
Extra dry: for cotton items.
The display shows the drying
programme duration.
button to
12.3 Timed Drying
1. Tap on the Time Dry button
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator
goes off and
the indicator
comes on.
Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Start/Pause
the programme.
to start
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
12.4 At the end of the drying
programme
•
•
The appliance stops automatically.
The acoustic signals operate (if they
are active).
•
In the display
•
The indicator of the Start/Pause
•
comes on.
button goes off. The door locked
indicator goes off and the door
unlocks.
Press the On/Off button for some
seconds to deactivate the appliance.
30
www.electrolux.com
After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
13. FLUFF IN THE FABRICS
During the washing and/or drying phase,
some types of fabric, (sponge, wool,
sweatshirt) could release fluff.
The released fluff could stick to the
fabrics during the next cycle.
This inconvenient increases with
technical fabrics.
To prevent the fluff in your laundry, we
recommend that you:
•
•
•
•
To remove the fluff inside the drum,
set a special programme:
• Empty the drum.
• Clean the drum, the gasket and the
door with a wet cloth.
• Set the Machine Clean programme
and the Dry together to activate the
anti-fluff action.
•
To do not wash dark fabrics after you
washed and dried light coloured
fabrics (hand towel, wool, sweatshirt )
and the contrary.
To dry this type of fabrics at open air
when they are washed the first time.
To clean the drain filter.
After the drying phase, clean the
empty drum, the gasket and the door
with a wet cloth.
Touch the Start/Pause
start the programme.
button to
If the appliance is frequently
used, carry out the cleaning
programme regularly.
14. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
14.1 The laundry load
•
•
•
•
•
•
Divide the laundry into: white,
coloured, synthetics, delicates and
wool.
Follow the washing instructions on the
laundry care labels.
Do not wash white and coloured items
together.
Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first couple of times.
Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
Empty pockets and unfold.
•
•
•
•
•
•
•
Turn multilayered fabrics, wool and
items with printed illustrations inside
out.
Pre-treat tough stains.
Wash heavy soil stains with a special
detergent.
Be careful with curtains. Remove the
hooks and put the curtains in a
washing bag or pillowcase.
Do not wash laundry without hems or
with cuts.
Use a washing bag to wash small
and/or delicate items (e.g. underwired
bras, belts, tights, etc. ).
A very small load can cause balance
problems with the spin phase leading
to excessive vibration. If this occurs:
a. interrupt the programme and
open the door (refer to "Daily
Use" chapter);
ENGLISH
b. manually redistribute the load so
that the items are spaced evenly
around the tub;
c. press the Start/Pause button.
The spin phase continues.
14.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you pre-treat these
stains before you put the items in the
appliance.
Special stain removers are available.
Use the special stain remover that is
applicable to the type of stain and fabric.
14.3 Detergents and other
treatments
•
•
•
•
•
Only use detergents and other
treatments specially made for
washing machines:
– powder detergents for all types of
fabric, excluding delicate. Prefer
powder detergents containing
bleach for whites and laundry
sanitization
– liquid detergents, preferably for
low temperature wash
programmes (60 °C max) for all
types of fabric, or special ones for
woollens only.
Do not mix different types of
detergents.
To help the environment, do not use
more than the recommended quantity
of detergent.
Follow the instructions that you find
on packaging of the detergents or
other treatments without exceeding
the indicated maximum level (
).
Use the recommended detergents for
the type and colour of the fabric, the
programme temperature and the level
of soil.
14.4 Ecological hints
•
•
Set a programme without the prewash
phase to wash laundry with normal
soil.
Always start a washing programme
with the maximum load of laundry
allowed.
•
•
31
If you pre-treat the stains or use a
stain remover, set a programme with
a low temperature.
To use the correct quantity of
detergent, check the water hardness
of your domestic system. Refer to
"Water hardness".
14.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you
use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to use
a water softener.
To find out the water hardness in your
area, contact your local water authority.
Use the correct quantity of water
softener. Follow the instructions that you
find on the packaging of the product.
14.6 Drying hints
Prepare the drying cycle
• Open the water tap.
• Check if the drain hose is connected
properly. Refer to installation chapter
for more information.
• For the maximum laundry load of the
drying programmes, refer to the
drying programmes table.
14.7 Items not suitable for
drying
Do not set a drying programme for
this laundry:
• Synthetic curtains.
• Pieces of clothing with metal inserts.
• Nylon stockings.
• Quilts.
• Bed covers.
• Duvets.
• Anoraks.
• Sleeping bags.
• Fabrics with residue of hair sprays,
nail solvents or similar.
• Garments with foam-rubber or
materials similar to foam-rubber.
32
www.electrolux.com
14.8 Garment labels
When you dry the laundry, obey the
indications on the labels of the
manufacturers:
•
= The item can be tumble dried
•
= The drying cycle is at high
temperature
•
= The drying cycle is at reduced
temperature
•
= The item can not be tumble
dried.
14.9 Drying cycle duration
The drying time can change depending
on:
• speed of the last spin
• dryness level
• type of laundry
• weight of the load
WARNING!
To avoid creasing and
shrinkage do not overdry
the laundry.
14.11 General Tips
Refer to the «Drying programmes» table
to find the average drying times.
Experience will help you to dry the
laundry better. Take note of the duration
of the cycles done before.
To avoid the static charge at the end of
the drying cycle:
1. Use fabric conditioner in the washing
cycle.
2. Use special fabric conditioner for
tumble dryers.
When the drying programme is
completed remove the laundry promptly.
14.10 Additional drying
If, at the end of the drying programme,
the laundry is still damp, set a short
drying cycle again.
15. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
15.1 External cleaning
Clean the appliance with mild soap and
warm water only. Fully dry all the
surfaces.
CAUTION!
Do not use alcohol, solvents
or chemical products.
CAUTION!
Do not clean the metal
surfaces with chlorine-based
detergent.
15.2 Descaling
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check for
limescale.
Regular detergents already contain water
softening agents, but we recommend to
run a cycle with an empty drum and a
descaling product occasionally.
Always follow the
instructions that you find on
the packaging of the
product.
15.3 Maintenance wash
The repeated and prolonged use of low
temperature programmes can cause
ENGLISH
detergent deposits, fluff residues,
bacterial growth inside the drum and the
tub. This could generate bad odours and
mildew. To eliminate these deposits and
clean the inner part of the appliance, run
a maintenance wash regularly (at least
once a month).
Refer to Cleaning the drum
chapter.
15.4 Door seal with double lip
trap
This appliance is designed with a self
cleaning draining system, allowing light
fluff fibers that fall off the clothes to be
drained out with the water, in such a way
that there is no need by the customer to
access this area for regular maintenance
and cleaning.
•
•
33
Remove all laundry from the
drum.
Run the Machine Clean
programme . For more details,
refer to washing programme
table.
15.6 Cleaning the detergent
dispenser
To prevent possible deposits of dried
detergent or clotted fabric softener
and/or formation of mould in the
detergent dispenser drawer, once in a
while carry out the following cleaning
procedure:
1. Open the drawer. Press the catch
downwards as indicated in the
picture and pull it out.
1
2
Regularly examine the seal and remove
all objects from the inner part. Coins,
buttons, other small items forgotten in
the pockets of your clothes are deposited
during the washing cycle in the special
double lip trap in the porthole seal, where
they can be conveniently recovered at
the end of the cycle.
15.5 Cleaning the drum
Regularly examine the drum to prevent
rust forming.
Clean the drum with special products for
stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
For a thorough clean:
2. Remove the top part of the additive
compartment to aid cleaning and
flush it out under running warm
water, to remove any traces of
accumulated detergent. After
cleaning, put the top part back into
position.
34
www.electrolux.com
3. Make sure that all detergent residue
is removed from the upper and lower
part of the recess. Use a small brush
to clean the recess.
WARNING!
• Do not remove the filter
while the appliance
operates.
• Do not clean the pump if
the water in the appliance
is hot. Wait until the water
cools down
Proceed as follows to clean the pump:
1. Open the pump cover.
4. Insert the detergent drawer into the
guide rails and close it. Run the
rinsing programme without any
clothes in the drum.
2
1
2. Place a suitable bowl below the drain
pump access to collect the water that
flows out.
3. Open the chute downwards. Always
keep a rag nearby to dry up any
water spillages when removing the
filter.
15.7 Cleaning the drain pump
WARNING!
Disconnect the mains plug
from the mains socket.
Regularly check the drain
pump filter and make sure
that it is clean.
Clean the drain pump if:
• The appliance does not drain the
water.
• The drum does not turn.
• The appliance makes an unusual
noise because of the blockage of the
drain pump.
• The display shows the alarm code
.
4. Turn the filter 180 degrees in anticlockwise direction to open it, without
removing. Let the water flow out.
ENGLISH
35
10. Clean the filter under the water tap.
5. When the bowl is full of water, turn
the filter back and empty the
container.
6. Repeat the steps 4 and 5 until the
water stops to flow out.
7. Turn the filter anti-clockwise to
remove it.
11. Put the filter back into the special
guides by turning it clockwise. Make
sure that you tighten the filter
correctly to prevent leakages.
2
1
1
2
8. If it is necessary, remove fluff and
objects from the filter recess.
9. Make sure that the impeller of the
pump can rotate. If it does not rotate,
contact the Authorised Service
Centre.
12. Close the pump cover.
2
1
When you drain the water with the
emergency drain procedure, you must
activate the drain system again:
a. Put 2 litres of water in the main
wash compartment of the
detergent dispenser.
b. Start the programme to drain the
water.
36
www.electrolux.com
15.8 Cleaning the inlet hose and the valve filter
1
2
3
45°
20°
15.9 Emergency drain
If the appliance cannot drain the water,
carry out the same procedure, described
in 'Cleaning the drain pump' paragraph. If
necessary, clean the pump.
When you drain the water with the
emergency drain procedure, you must
activate the drain system again:
1. Put 2 litres of water in the main wash
compartment of the detergent
dispenser.
2. Start the programme to drain the
water.
15.10 Frost precautions
If the appliance is installed in an area
where the temperature can reach values
around 0° C or drop below, remove the
16. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
remaining water from the inlet hose and
the drain pump.
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Put the two ends of the inlet hose in
a container and let the water flow out
of the hose.
4. Empty the drain pump. Refer to the
emergency drain procedure.
5. When the drain pump is empty,
install the inlet hose again.
WARNING!
Make sure that the
temperature is higher than 0
°C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
ENGLISH
37
16.1 Introduction
The appliance does not start or it stops during operation.
First try to find a solution to the problem (refer to the table). If the problem persists,
contact the Authorised Service Centre.
WARNING!
Deactivate the appliance before carrying out any check.
In case of major problems, the acoustic signals operate, the display shows an
alarm code and the Start/Pause
•
•
•
button may flash continuously:
- The mains supply is unstable. Wait until the mains supply is stable.
- No communication between electronic elements of the appliance. Switch it
off and switch on again. The programme was not finished properly or the appliance
stopped too early. If the alarm code appears again, contact the Authorised Service
Centre.
- The appliance does not fill with water properly. After the proper check, start
button the appliance tries to
the appliance again by pressing Start/Pause
resume the cycle . If the error persists the alarm code will appear again.
•
•
- The appliance does not drain the water.
- The appliance door is open or not closed correctly. Please check the door!
If the appliance is overloaded, remove some items from the drum
and/or hold the door shut while touching the Start/Pause
until the indicator
stops flashing (see the picture below).
button
38
www.electrolux.com
16.2 Possible failures
Problem
Possible solution
•
•
•
The programme does
not start.
•
•
•
•
•
•
•
The appliance does not
•
fill with water properly.
•
•
Make sure that the mains plug is connected to the
mains socket.
Make sure that the appliance door is closed.
Make sure that there is no damaged fuse in the fuse
box.
Make sure that the Start/Pause
has been touched.
If the delay start is set, cancel the setting or wait for the
end of countdown.
Deactivate the Child Lock function if it is on.
Check the position of the knob on the selected pro‐
gramme.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not
too low. For this information, contact your local water
authority.
Make sure that the water tap is not clogged.
Make sure that the inlet hose has no kinks, damages or
bends.
Make sure that the connection of the water inlet hose is
correct.
Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to 'Care and cleaning'.
The appliance fills with •
water and drains imme‐
diately
Make sure that the drain hose is in the correct position.
The hose may be positioned too low. Refer to "Installa‐
tion instruction".
•
•
•
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the
filter, if necessary. Refer to "Care and cleaning".
Make sure that the connection of the drain hose is cor‐
rect.
Set the drain programme if you set a programme with‐
out drain phase.
Set the drain programme if you set an option which
ends with water in the tub.
The appliance does not •
drain the water.
•
•
•
The spin phase does
•
not operate or the
washing cycle lasts lon‐ •
ger than usual.
Set the spin programme.
Make sure that the drain filter is not clogged. Clean the
filter, if necessary. Refer to "Care and cleaning".
Adjust manually the items in the tub and start the spin
phase again. This problem may be caused by balance
problems.
ENGLISH
Problem
Possible solution
•
There is water on the
floor.
•
•
•
You cannot open the
appliance door.
•
•
•
•
•
The appliance makes
an unusual noise and
vibrates.
The programme dura‐
tion increases or de‐
creases during pro‐
gramme execution.
•
•
Make sure that the couplings of the water hoses are
tight and there is not water leakages.
Make sure that the water inlet hose and the drain hose
have no damages.
Make sure you use the correct detergent and the correct
quantity of it.
Make sure that a washing programme that ends with
water in tub, has been selected.
Make sure that the washing programme is finished.
Set the drain or the spin programme if there is water in
the drum.
Make sure that the appliance receives electrical power.
This problem may be caused by a failure of the appli‐
ance. Contact the Authorised Service Centre.
If you need to open the door, please read carefully
"Emergency door opening".
Make sure the levelling of the appliance is correct. Refer
to "Installation instruction".
Make sure that the packaging and/or the transit bolts
are removed. Refer to "Installation instruction".
Add more laundry in the drum. The load may be too
small.
•
The SensiCare System is able to adjust the programme
duration according to the type and the laundry load size.
Refer to "The SensiCare System load detection" in "Dai‐
ly Use" chapter.
•
Increase the detergent quantity or use a different deter‐
gent.
Use special products to remove the stubborn stains be‐
fore you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
The washing results are •
not satisfactory.
•
•
Too much foam in the
drum during the wash‐
ing cycle.
39
•
Reduce the quantity of detergent.
After the washing cycle, •
there are some deter‐
gent residues in the dis‐ •
penser drawer.
Make sure that the flap is in the correct position (UP for
powder detergent - DOWN for liquid detergent).
Make sure you have used the detergent dispenser ac‐
cording the indications given in this user manual.
•
The appliance does not •
dry or does not dry cor‐ •
rectly.
•
Turn the water tap on.
Make sure the drain filter is not clogged.
Reduce the laundry load.
Make sure you have set the correct cycle. if necessary,
set again a short drying time.
40
www.electrolux.com
Problem
Possible solution
The fabrics washed in the previous cycle released fluff of a
different colour:
• The drying phase helps to eliminate some fluff.
The laundry is full of dif‐
• Clean the clothes with a fluff remover.
ferent colours fluff.
In case of an excessive amount of fluff in the drum run the
special programme to clean it (refer to “Fluff in the fabrics"
for more details).
After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes, deactivate and activate the appliance. If the problem
continues, contact the Authorised Service Centre.
16.3 Emergency door opening
In case of power failure or functioning
failure the appliance door remains
locked. The washing programme
continues when the power is restored. If
the door remains locked in case of
failure, it is possible to open it using the
emergency unlock function.
Before opening the door:
To open the door, proceed as follows:
1. Press the On/Off button to switch the
appliance off.
2. Disconnect the mains plug from the
mains socket.
3. Open the filter flap.
4. Pull twice the emergency unlock
trigger downward and open the
appliance door.
CAUTION!
Risk of burns! Make sure
that the water temperature
is not too high and the
laundry is not hot. If
necessary, wait until they
cool down.
CAUTION!
Risk of injury! Make sure
that the drum is not
rotating. If necessary, wait
until the drum stops
rotating.
Make sure that the water
level inside the drum is
not too high. If necessary,
proceed with an
emergency drain (refer to
«Emergency drain» in
«Care and cleaning»
chapter).
5. Take out the laundry and then close
the appliance door.
6. Close the filter flap.
ENGLISH
41
17. CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant stand‐
ards. Different causes can change the data: the quantity and type of
laundry and ambient temperature. Water pressure, the supply voltage
and the temperature of inlet water may also affect the washing pro‐
gramme duration.
Technical specifications may be changed without prior notice to improve
the quality of product.
During the washing programme, the ProSense technology can vary the
wash duration and the consumption values. For further details see 'The
ProSense load detection' paragraph in 'Daily Use' chapter.
Programmes
Load
(kg)
Energy
Water con‐
con‐
sumption
sumption (litre)
(kWh)
Approximate pro‐
gramme duration
(minutes)
Cottons 60°C
7
1.30
80
220
Cotton Eco
60 °C
Cottons energy saving
programme1)
7
0.59
52
262
Cottons 40°C
7
1.20
80
210
Synthetics 40°C
3
0.80
60
140
Delicates 40°C
3
0.60
60
120
1.5
0.30
60
75
Wool/Handwash 30°C
1) This programme at 60 °C with a load of 7 kg is the reference programme for energy label
data, in compliance with UAE. S 5010 2:2013.
18. TECHNICAL DATA
Dimension
Width/ Height/ Depth/
Total depth
597 mm/ 848 mm/ 547 mm/ 576
mm
Electrical connection
Voltage
Overall power
Fuse
Frequency
220-240 V
2200 W
13 A
50 Hz
Level of protection against ingress of solid parti‐ IPX4
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture
42
www.electrolux.com
Water supply 1)
Cold water
Water supply pressure Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Maximum wash load
Cotton
7 kg
Maximum dry load
Cotton
Synthetics
4 kg
3 kg
Spin Speed
Maximum
1350 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
19. ACCESSORIES
19.1 Available in www.electrolux.com/shop or from authorised
dealer
Only appropriate accessories approved by ELECTROLUX ensure the
safety standards of the appliance. If unapproved parts are used, any
claims will be invalidated.
19.2 Fixing plate kit
(4055171146)
Read carefully the instructions supplied
with the accessory.
Available from your authorised dealer.
If you install the appliance on a plinth,
secure the appliance in the fixing plates.
20. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
*
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH
43
157019810-A-192018
www.electrolux.com/shop