advertisement
WASL6IE300
EN
Washing Machine User Manual
2 www.electrolux.com
CONTENTS
5. THE WATER SOFTENER (SOFTWATER TECHNOLOGY)............................13
9. WI-FI CONNECTIVITY SETUP................................................................... 20
21. PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION
1369/2017.............................................................................................................55
electrolux.com/app
GET IT ON
ENGLISH
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
3
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
•
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
4 www.electrolux.com
•
•
•
•
•
•
•
Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away unless continuously supervised.
Children of less than 3 years of age should be kept away unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance when the door is open.
Children shall not carry out cleaning and user maintenance of the appliance without supervision.
•
•
•
•
•
•
•
•
1.2 General Safety
Do not change the specification of this appliance.
This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other
–
– working environments; by clients in hotels, motels, bed & breakfast and other residential type environments; areas for communal use in blocks of flats or in launderettes.
Do not exceed the maximum load of 9 kg (refer to the
"Programme chart" chapter).
The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering.
The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised
•
•
•
ENGLISH
Service Centre or similarly qualified persons to avoid an electrical hazard.
Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
Do not use high pressure water sprays and/or steam to clean the appliance.
Clean the appliance with a moist cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply with relevant national regulations.
• Do not spray water on the appliance and do not expose it to excessive humidity.
• Do not install the appliance where the appliance door cannot be fully opened.
• Do not put a closed container to collect possible water leakage under the appliance. Contact the Authorised
Service Centre to ensure which accessories can be used.
5
• Remove all the packaging and the transit bolts including rubber bush with plastic spacer.
• Keep the transit bolts in a safe place.
If the appliance is to be moved in the future they must be reattached to lock the drum to prevent an internal damage.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance.
• Do not install or use the appliance where the temperature can be less than 0°C or where it is exposed to the weather.
• The floor area on which the appliance is to be installed must be flat, stable, heat resistant and clean.
• Make sure that there is air circulation between the appliance and the floor.
• When the appliance is in its permanent position, check if it is levelled correctly with the aid of a spirit level. If it is not, adjust the feet accordingly.
• Do not install the appliance directly above a floor drain.
2.2 Electrical connection
WARNING!
Risk of fire and electric shock.
• The appliance must be earthed.
• Always use a correctly installed shockproof socket.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
6 www.electrolux.com
• Do not touch the mains cable or the mains plug with wet hands.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• This appliance complies with the
E.E.C. Directives.
2.3 Water connection
• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
• Ensure that there are no visible water leaks during and after the first use of the appliance.
• Do not use an extension hose if the inlet hose is too short. Contact the
Authorised Service Centre for the replacement of the inlet hose.
• It is possible to see water flowing from the drain hose. This is due to the testing of the appliance with the use of water in the factory.
• You can extend the drain hose to maximum 400 cm. Contact the
Authorised Service Centre for the other drain hose and the extension.
2.4 Use
WARNING!
Risk of injury, electric shock, fire, burns or damage to the appliance.
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Unpacking
WARNING!
Remove all the packaging and the transit bolts before installing the appliance.
• Follow the safety instructions on the detergent packaging.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Make sure that all metal objects are removed from the laundry.
• Do not wash fabrics which are heavily soiled with oil, grease or other greasy substances. It can damage rubber parts of the washing machine.
Prewash such fabrics by hand before loading them into the washing machine.
• Do not touch the glass door while a programme is in operation. The glass can get hot.
2.5 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains electrical and water supplies.
• Cut off the mains electrical cable close to the appliance and dispose of it.
• Remove the door catch to prevent children or pets from becoming trapped in the drum.
• Dispose of the appliance in accordance with local requirements for the disposal of Waste Electrical and Electronic Equipment (WEEE).
WARNING!
Use the gloves.
1. Remove the external film. If necessary, use a cutter.
ENGLISH 7
2. Remove the cardboard top and the polystyrene packaging materials.
Make sure not to damage the hoses.
7. Remove the polystyrene protection from the bottom.
1
3. Remove the internal film.
2
8. Fully clean and dry the bottom of the appliance.
4. Open the door and remove the polystyrene piece from the door seal and all the items from the drum.
5. Carefully put the appliance down on its rear side.
6. Put the front polystyrene packaging element on the floor under the appliance.
CAUTION!
Do not use alcohol, solvents or chemical products.
9. Make sure to identify the different sizes and the positions of the sound barriers. Refer to the illustration:
8 www.electrolux.com
A
B
• A (FRONT) = Front of the appliance
• B (BACK) = Rear of the appliance
10. Remove the adhesive strip from the silent barriers.
11. Attach the four barriers to bottom of the appliance.
12. Refer to the illustration. Make sure that the barriers are securely attached.
It is possible to see water flowing from the drain hose.
This is due to the testing with water of the appliance in factory.
15. Remove the three bolts by using the spanner supplied with the appliance.
x4
A
16. Pull out the plastic spacers.
17. Put the plastic caps, that you find in the user manual bag, in the holes.
B
Attach the sound barriers at a room temperature.
13. Pull up the appliance in vertical position.
14. Remove the power supply cable and the drain hose from the hose holders.
We recommend that you keep the packaging and the transit bolts for any movement of the appliance.
3.2 Positioning and levelling
1. Install the appliance on a flat hard floor.
Make sure that the appliance does not touch the wall or other units.
2. Loosen or tighten the feet to adjust the level.
WARNING!
Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level.
ENGLISH
3.3 The inlet hose
1. Connect the water inlet hose to the back of the appliance.
2. Position it toward left or right depending on the position of the water tap.
9 x4
The appliance must be level and stable.
A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation.
When the machine is installed on a plinth or if a washer dryer is stacked on the washing machine, use the accessories described in chapter 'Accessories'. Read carefully the instructions supplied with the appliance and with the accessory.
Make sure that the inlet hose is not in vertical position.
3. If necessary, loose the ring nut to set it in the correct position.
4. Connect the water inlet hose to the cold water tap with 3/4" thread.
CAUTION!
Make sure that there are no leaks from the couplings.
Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replacement of the inlet hose.
3.4 Water-stop device
The inlet hose has a water stop device.
This device prevents water leaks in the hose because of its natural ageing.
10 www.electrolux.com
The red sector in the window «A» shows this fault.
A
If this occurs, close the water tap and contact the authorized service centre to replace the hose.
3.5 Water drainage
The drain hose should be positioned at a height of not less than 60 cm and not more than 100 cm from the floor.
You can extend the drain hose to maximum 400 cm.
Contact the authorized service centre for the other drain hose and the extension.
It is possible to connect the drain hose in different ways:
1. Make a U shape with the drain hose and put it around the plastic hose guide.
2. On the edge of a sink - Fasten the guide to the water tap or to the wall.
Make sure that the plastic guide cannot move when the appliance drains.
Make sure that the drain hose end is not immersed in the water. There may be a return of dirty water into the appliance.
3. To a stand pipe with vent-hole -
Insert the drain hose directly into a drain pipe. Refer to the illustration.
The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm min. 1.5") must be larger than the external diameter of the drain hose.
4. If the end of the drain hose looks like this (see the picture), you can push it directly into the stand pipe.
5. Without the plastic hose guide, to
a sink spigot - Put the drain hose in the spigot and tighten it with a clamp.
Refer to the illustration.
ENGLISH 11
6. Position the hose directly to a built-
in drain pipe in the room wall and tighten it with a clamp.
Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink.
4. PRODUCT DESCRIPTION
4.1 Special features
Your new washing machine meets all modern requirements for an effective treatment of laundry with low water, energy and detergent consumption and proper care of fabric.
• The interactive touch screen
display makes the setting and the use of the appliance more immediate and agreeable.
• The Wi-Fi connection enables you to start and check your washing cycle status in remote control.
• The SoftWater Technology acts as
water softener and removes harsh minerals from the inlet water and supplies soft water for the washing.
Wash after wash, fabric stiffness, shrinkage and colour fading are prevented.
• The Oko-Mix technology has been designed to protect the fabric fibres thanks to different pre-mixing phases that dissolves first the detergent and then fabric softener in the water before they are distributed in the laundry. So every fibre is reached and cared for.
• Thanks to the Weight Sensors the appliance can detect the weight of your load and advise on how much detergent you need to achieve the best results without waste.
• The ProSense technology adjusts automatically the programme duration to the laundry in the drum to achieve perfect washing results in the minimum possible time.
• The steam has a quick and easy way to refresh the clothes. The gentle steam programmes remove odours and reduce creases in dry fabrics so they need little ironing.
The Plus Steam option, finishes every cycle with gentle steam that relaxes the fibres and reduces fabric creasing. Ironing will be easier!
• The Stains option pre-treats stubborn stains optimizing the effectiveness of the stain remover.
• Thanks to the Soft Plus option, the fabric softener is uniformly spread out in the laundry and deeply penetrates the fabric fibres favouring a perfect softness.
12 www.electrolux.com
4.2 Appliance overview
1 2 3 8 9
4
5
10
11 12
6
1
Worktop
2 Detergent dispenser and salt compartment
3
Control panel
4
Door handle
5
Rating plate
6
Drain pump filter
7
Feet for levelling the appliance
8
Drain hose
9
Inlet hose connection
10
Mains cable
11
Transit bolts
12
Hose support
4.3 Detergent dispenser and salt compartment
Always follow the instructions that you find on the packaging of the detergent products. Anyway, we recommend not to exceed the maximum indicated level in each compartment ( ).
7
Salt
Max
▼
M ax
▼
t
Sal
Ma x ▼
Compartment for washing phase: powder detergent, stain remover.
When using liquid detergent, make sure that the special container for liquid detergent is inserted.
Refer to 'Filling the detergent and additives' in 'Daily
Use' chapter.
Compartment for liquid additives
(fabric conditioner, starch).
Salt
Compartment for salt.
Read carefully 'The
Water Softener technology ( Soft
Water)'.
Maximum level for detergent/ additives quantity.
When selecting a prewash phase, put the detergent/ additive in a dosing ball inside the drum.
ENGLISH 13
After a washing cycle, if necessary, remove any detergent residue from the detergent dispenser.
5.1 Introduction
The water contains harsh minerals. The higher the content of these minerals the harder the water is.
Hard water can reduce the effectiveness of the detergent, reduce the softness of fabrics and contribute towards shrinkage and colour fading.
This appliance is equipped with a water softener able to provide the right degree of water softening to preserve the fabric integrity, colour brightness and ensuring good wash performances at low temperature.
The water softener should be adjusted according to the water hardness of your inlet water. A correct setting allows to achieve the best washing results and the maximum garments protection.
To set the water softener correctly, please refer to 'How to set the water hardness level'.
The first time you turn the appliance on, the touch screen proposes different settings: one on this is water hardness level.
5.2 How to set the water hardness level
The appliance allows you to chose between 7 levels corresponding to 7 different ranges of water hardness.
Depending on the country, the water hardness is expressed in equivalent scales: e.g. French degrees (°f), German degrees (°d), English degrees (°e), mmol/l and ppm.
If necessary, please contact your local water authority to check the water hardness in your area.
Check in the "Water hardness levels" table which is the proper level.
To set the water hardness level:
1. Press the On/Off button for a few seconds to activate the appliance.
2. Wait until the programme screen appears and scroll up and down the list to find Settings.
3. Tap on to enter the setting list.
14 www.electrolux.com
Spin
Machine Clean
Settings
OKOPower
ColourPro
8. Scroll up and down the setting list to find the Water Softener bar and tap on it to enter.
<Programmes Info
Water Softener Wash
1
2
3
4. Scroll the list up and down to find
Water Hardness.
5. Tap on the Water Hardness bar.
6. Scroll the level list right and left to chose the proper level.
<Programmes
Buzzer
Water Hardness
Info
OFF
6
< Wash >
9. Scroll the bar right and left to chose:
• Wash: the water softener acts during washing phase only. This setting satisfies most of the use condition.
• Wash & Rinse: if the inlet water is particularly hard (6 and 7 levels), we suggest to set the water softener also during rinsing phase to preserve the fabric softness.
This setting increases the salt consumption.
• OFF: to deactivate the water softener.
<5 6 7>
7. Tap on the Water Hardness bar to exit and to confirm the chosen level.
Water hardness levels
Levels
Levels as in‐ dicated on the tester1)
Water hardness range
42)
5
6
C01
C02
C03
C04
C05
C06
°f
(French degrees)
≤5
6 - 13
14 - 21
22 - 29
30 - 37
38 - 45
°d
(German degrees)
≤3
4 - 7
8 - 11
12 - 16
17 - 20
21 -25
°e
(English degrees)
≤ 4
5 - 9
10 -15
mmol/l ppm
≤0.5
≤ 50
0.6 - 1.3
60 - 130
1.4 - 2.1 140 - 210
16 - 20 2.2 - 2.9 220 - 290
21 - 26 3.0 - 3.7 300 - 370
27 - 32 3.8 - 4.5 380 - 450
ENGLISH 15
Levels
Levels as in‐ dicated on the tester1)
Water hardness range
°f
(French degrees)
°d
(German degrees)
°e
(English degrees)
7 C07 ≥46 ≥26 ≥33
1) If supplied with the appliance.
2) Factory setting, able to satisfy most of the use conditions.
5.3 Pouring salt
The water softener function acts through special resins present in the appliance.
To regenerate the resins and make them ready to soften the water pour a special
Salt
salt in the compartment :
1. Open the detergent dispenser.
SALT
x▼
Ma
mmol/l
≥4.6
Max
▼
Max
▼
ppm
≥460
Max
▼
M ax
▼
2. Open the compartment
Salt
.
Ma x▼
Sal t
Ma x
▼
Max
▼
Ma x
▼
3. Pour the special salt.
4. Close the salt compartment and the detergent dispenser.
Regularly check if there is enough salt.
Salt
The compartment can contain about
600 gr of salt that are sufficient for about
20 - 300 washing cycles (or 4 - 70 weeks) depending on the set water hardness level and whether the water softener is activated during wash phase only. If the water softener is activated also during rinse phase, the salt refilling lasts 5 - 80 washing cycles (or 1 - 18 weeks) depending on the set water hardness level. Refer to 'How to set the water hardness level'.
The display shows the message Top up
salt at the end of a cycle when compartment needs to be refilled with salt, even if a little salt still remains.
WARNING!
Pour the salt in the
Salt
compartment only.
16 www.electrolux.com
WARNING!
Do not put anything but salt
Salt
in the compartment . If any other detergent/additive is poured inadvertently in this compartment, please refer to 'Eliminating detergent or other additives from salt compartment' in
'Troubleshooting' chapter.
Only use special salt for dishwasher and/or washing machine. The proper salt can be ordered form the web site!
Other types of salts are less efficient and over time could damage the water softener technology permanently. Do
not use fine salt!
6. CONTROL PANEL
6.1 Control panel description
2
The appliance works normally even without salt, but without exploiting its full potential. If you use the appliance without salt for a long time, once the salt is finally refilled, the water softener function is completely restored after a few long washing cycles.
3
1
On/Off button (On/Off)
2
Programme dial
3
Touch screen
7. FIRST TIME START-UP
Each time you turn the appliance on, the
Start-up Screen appears on the touch screen.
1
4
Start/Pause button (Start/Pause)
4
13.45
The first time you turn the appliance on, after the Start-up Screen you are guided through the initial setup procedure.
7.1 Language setup
1. Scroll the language list to find the desired language and hold the desired language pressed to set it.
1/4 Language
Svenska
Deutch
English
Italiano
Francais
2. The following screen pops up:
• tap on OK to confirm the language:
• tap on Change to change it.
2/4 Language
SV
DE
EN
IT
FR
You’ve selected:
English
Change OK
7.2 Time setup
1. Scroll the hour and minute bars to the right or to the left to set the current time.
3/4 Info
Set Clock 13:45
<12
13 h
14>
<44
45 min
46>
ENGLISH
2. Tap on the Set Clock bar to set the time.
17
3/4 Info
Set Clock 13:45
<12
13 h
14>
45 min
<44 46>
3. The following screen pops up:
• tap on OK to confirm the set time.
• tap on Change to change it.
4/4 Set Clock
Current time:
13:45
Change OK
7.3 More settings
After you set the time, the More settings screen pops up.
More Settings
More settings to get the best results from this machine will follow. Set them now?
Later Set
If you tap on Later, the programme list screen appears and you can set the desired programme.
3h01min
OKOPower
ColourPro
Cottons
40
1200
Cottons Eco
Synthetics
More
If you tap on Set, proceed with next settings.
18 www.electrolux.com
7.4 Water Hardness
The display suggests to set the proper water hardness level to improve the washing results.
The following window pops up.
Water Hardness
Select water hardness for best results.
Keep default setting?
Change OK
• Tap on OK to confirm the default setting.
1. Tap on Change to enter the Water
Hardness submenu.
Info
Buzzer Long
Water Hardness
4
Detergent advice
Advise on detergent level for best results. Set now or later?
Later Set
1. Tap on Set. The following window pops up.
Detergent advice
Set detergent dose for full load in
9 kg machine. Refer to detergent packaging for recommended dosage
Later OK
2. Tap on OK to enter the Detergent
Dosing menu.
3. Tap on the Detergent Type 1 or
Detergent Type 2 bar.
Info
OFF Detergent Dosing
Detergent Type 1
Detergent Type 2
<3 4 5>
2. Scroll the level list right or left to set the desired water hardness level.
3. Tap on the Water Hardness bar.
The following window pops up.
Water Hardness
Water hardness is set to
4
Change OK
4. Tap on OK to confirm or on Change to change the level.
7.5 Detergent Dosing
You can set the average quantity of detergent suggested on the detergent packaging.
4. Scroll the submenu bar right or left to set the detergent dosage in ml that matches with the average dosage suggested on the detergent packaging.
Info
Detergent Type 1 OFF
<40 50 ml
60>
5. Tap on the Detergent Type 1 bar.
The following window pops up. Tap on OK to confirm your choice.
Detergent advice
You’ve selected:
50
Change OK
7.6 Wi-Fi
The startup ends with following dialog window.
8. TOUCH SCREEN
Each time you turn the appliance on, the
Start-up Screen appears on the touch screen.
ENGLISH 19
OK
Settings complete. To connect your machine to WiFi, see instructions in user manual
OK
Refer to the "Wi-Fi Connectivity setup" section in the "Settings" chapter.
13.45
After a few seconds, the programme list screen appears proposing Cottons as default programme.
3h01min
OKOPower
ColourPro
Cottons
Cottons Eco
Synthetics
40
1200
More
If you don't scroll the programme list up and down, in a few seconds the programme summary screen appears.
To return to the programme list screen just tap on the programme name (e.g.
Cottons).
1h07min
Max 9.0 Kg
Cottons
40
1200
More
The summary screen shows:
• Programme maximum load, programme name.
1h07min
Max 9.0 Kg
Cottons
40
1200
More
• Programme duration. If selected, this area can also show the delayed start or the Time Save symbol.
1h07min
Max 9.0 Kg
Cottons
40
1200
More
20 www.electrolux.com
• The currently selected options. The shortcut allows to enter the additional option menu.
1h07min
Max 9.0 Kg
Cottons
40
1200
More
When a shortcut is visible on the summary screen, it is possible to enter an option/ setting menu by just tapping on the relevant shortcut.
The different option/setting menus can be scrolled:
• up and down, or
• right or left.
To set some options or settings it is sufficient to change the status from OFF to ON just tapping on the relevant bar.
Programmes, options and settings can also be set by turning the programme dial and in horizontal submenus the desired choice can be set just tapping on the arrows < or >.
9. WI-FI CONNECTIVITY SETUP
This chapter describes how to connect the smart appliance to the Wi-Fi network and to link it to mobile devices.
By this functionality you can receive notifications, control and monitor your washing machine from your mobile devices.
To connect the appliance to enjoy the full range of features and services you need:
• Wireless network at home with internet connection enabled.
• Mobile device connected to wireless network.
Max Power
Frequency
Protocol
2.412 - 2.472 GHz for European mar‐ ket
IEEE 802.11b/g/n two stream radio
<20dBm
9.1 Installing and configuring
"My Electrolux"
When connecting the washing machine to the application, stand near it with your smart device.
Make sure that your smart device is connected to the wireless network.
1. Go to the App Store on your smart device.
2. Download and install the App "My
Electrolux".
3. Make sure you started a Wi-fi connection in the washing machine.
If not, read the next paragraph
'Configuring the washing machine wireless connection'.
4. Start the application. Select the country and language and login with
Your email and password. If you do not have an account, create a new one following the instructions in "My
Electrolux".
5. Follow the instructions on the App for the washing machine registration and configuration.
A message appears on the washing machine display to confirm that the configuration was successful.
9.2 Configuring the washing machine wireless connection
1. In the programme list screen, tap on the shortcut to enter the setting menu.
2. Tap on the Wi-Fi bar to switch the connection on .
A pop-up message will appear, the icon
starts flashing and wireless module begins starting up. It may take about 2 minutes before it is ready.
Wi-Fi
Starting up
This might take up to 2 minutes.
Have your App ready
Cancel
When the wireless module is ready, a pop-up message will appear to inform you, that the access point will be open for about 3 minutes.
Wi-Fi
Trying to connect to App
Access point will be open for 3 minutes.
Cancel
3. Configure the "My Electrolux" app on your smart device.
4. If the connectivity is configured, a message appears on the washing machine display to confirm that the configuration was successful.
ENGLISH 21
Wi-Fi
Connected!
Signal strenght is good, 4/5
OK
5. Tap on OK to get back to the machine settings list.
6. Tap on Programmes to get back to the programme list screen.
9.3 Remote Start Mode
You can start and stop a washing programme remotely.
When the App is installed and the wireless connection is complete, the
Remote Start Mode option will appear among the available options of each programme.
To activate the remote start:
1. In the programme list screen, select the desired programme.
2. When the programme summary screen appears, tap on More to enter the option list.
3. Tap on the Remote Start Mode bar to activate it (ON status). The following message pops up:
<Back Remote Start Mode
Please press Start
To activate Remote Start Mode
Cancel
4. Press the Start/Pause button to activate the Remote Start Mode.
The indicators and appear on the programme summary screen and the door is locked.
22 www.electrolux.com
If the door is open, the
Remote Start Mode is deactivated.
If you pause or stop the cycle remotely, the door remains locked. To unlock the door, you should be in front of the appliance and press the Start/Pause. To avoid accidental unlocking of the doors, the Child Lock option can be activated.
10. BEFORE FIRST USE
During installation or before first use you may observe some water in the appliance.
This is a residual water left in the appliance after a full functional test in the factory to ensure the appliance is delivered to customers in perfect working order and is no cause for concern.
1. Make sure that all transit bolts have been removed from the appliance.
2. Make sure that the electrical power is available and the water tap is open.
3. Make sure that there is salt in the
Salt
compartment marked by and set
11. PROGRAMMES
11.1 Programme Chart
WARNING!
If the temperature and level of the water in the drum are too high and/or the drum still rotates you cannot open the door.
the proper water hardness level.
Refer to "How to set the water hardness level".
4. Pour 2 litres of water into the detergent compartment marked by
.
This action activates the drain system.
5. Pour a small quantity of detergent into the compartment marked by .
6. Set and start a programme for cotton at the highest temperature without any laundry in the drum.
This removes all possible dirt from the drum and the tub.
All washing programmes benefit from the softened water, if the water softener is active.
Washing programmes
Programme
Washing programmes
OKOPower
Programme description
Cotton and fast-coloured synthetic items. Complete washing programme that, in only 59 minutes, washes the daily soiled laundry intensively and ensures a good wash‐ ing performance in a short time.
Programme
ColourPro
Cottons
Cottons Eco
Synthetics
Delicates
ENGLISH 23
Programme description
Coloured cottons and synthetics. Low-temperature cycle for a greater colour protection keeping good cleaning re‐ sults thanks to softened water. To get the best care of your fabrics, we recommend not to fill the drum completely.
White cotton and coloured cotton. Normal, heavy and light soil.
White cotton and coloured cotton. Normal, heavy and light soil.
Standard programmes for the Energy Label consump‐
tion values. According to regulation 1061/2010, the pro‐ grammes Cottons Eco at 60 °C and the programme
Cottons Eco at 40 °C are respectively the «Standard
60°C cotton programme» and the «Standard 40°C cotton programme». They are the most efficient programmes in terms of combined energy and water consumption for washing normally soiled cotton laundry.
The water temperature of the washing phase may differ from the temperature declared for the selected programme.
If you set any option, the indicator disap‐ pears to indicate that the programme doesn't correspond to the energy label data anymore.
Synthetic items or mixed fabric items. Normal soil.
Delicate fabrics such as acrylics, viscose and mixed
fabrics requiring gentler washing. Normal soil.
24 www.electrolux.com
Programme
Wool/Silk
Programme description
Machine washable wool, hand washable wool and oth‐
er fabrics with «hand washing» care symbol1).
Woolmark Apparel Care - Green
The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool gar‐ ments labelled as «hand wash» provided that the garments are washed according to the instructions issued by the manufacturer of this washing machine. Follow the garment care label for drying and other laundry instructions. M1361
In UK, Eire, Hong Kong and India the Woolmark symbol is a certification trademark.
Steam programme
Steam
Steam programme for cotton and synthetic items.
Steam can be used for dried2), washed or worn once laun‐ dry. This programme reduce creases and odours3) and re‐ laxes the fibres. When the programme is completed, quick‐ ly remove the laundry from the drum. After a steam pro‐ gramme, ironing becomes effortless. Do not use any deter‐ gent. If necessary, remove stains by washing or using lo‐ calized stain removal. Steam programmes do not perform any hygienic cycle. Do not set a Steam programme with these types of items:
• Items that are not suitable for tumble drying.
• All items with plastic, metal, wooden parts or alike.
Washing programmes
20min 3kg Cotton and synthetic items lightly soiled or once worn.
Programme
Outdoor
Jeans
Anti-Allergy
Rinse
Drain
ENGLISH 25
Programme description
Do not use fabric softener and make sure that there is no softener residue in the detergent dispenser.
Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable
fleece or inner insulation. The recommended laundry load is 2.5 kg.
This programme can also be used as water-repellent re‐ storing cycle, specifically tailored for treating clothes with a hydrophobic coating. To perform the water-repellent restor‐ ing cycle, proceed as follows:
• Pour the washing detergent in the compartment .
• Pour a special water-repellent restorer for fabric in the drawer compartment for fabric softener .
• Reduce the laundry load to 1 kg.
To further improve the water-repellent restor‐ ing action, dry the laundry in a tumble dryer by setting the Outdoor drying programme (if avail‐ able and if the garment care label permits tum‐ ble drying).
Denim clothing and jersey items. Normal soil. This pro‐ gramme performs a gentle rinsing phase, designed for den‐ im, that reduces fading and does not cause washing pow‐ der residues on the fibres.
White cotton items. This programme removes micro-or‐ ganisms thanks to a washing phase with the temperature maintained above 60°C for several minutes. This helps re‐ move germs, bacteria, micro-organism and particles. An additional rinsing phase ensures a proper removal of deter‐ gent residues and pollens/allergenic items. In this way the wash is more effective.
All fabrics, except woollens and very delicate fabrics.
Programme for rinsing and spinning the laundry. The de‐ fault spin speed is the one used for cotton programmes.
Reduce the spin speed accordingly to the type of laundry. If necessary, set the Extra Rinse option to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin.
All fabrics, except woollens and very delicate fabrics.
Programme for draining the water left in the drum.
26 www.electrolux.com
Programme
Spin
Machine Clean
Programme description
All fabrics, except woollens and very delicate fabrics.
Programme for spinning the laundry and draining the water left in the drum. The default spin speed is the one used for cotton programmes. Reduce the spin speed accordingly to the type of laundry.
Maintenance cycle with hot water to clean and freshen the drum and to remove residue that may cause odour. For the best result use this cycle once a month. Before running this cycle, remove all items from the drum. Pour a cup of chlor‐ ine bleach or a washing machine cleaner in the washing phase compartment. DO NOT use both together.
After the drum cleaning, run a further rinse cy‐ cle with empty drum and no detergent to re‐ move any residue of bleach.
Run this programme especially when the mes‐ sage Cleaning cycle recommended pops up.
If the cleaning programme is postponed, the message keeps on popping up during next uses until it is run.
1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.
2) If you set a Steam programme with dried laundry, at the end of the cycle the laundry can be humid. Line dry the items for about 10 minutes.
3) Steam programme doesn't remove particularly intense odour.
Programme temperature, maximum spin speed and maximum load
Programme Default tempera‐ ture
Temperature range
Reference spin speed
Spin speed range
Maximum load
OKOPower
ColourPro
Cottons
Cottons Eco
30 °C
60 °C - 30 °C
30 °C
30 °C - Cold
40 °C
95 °C - Cold
40 °C
60 °C - 40 °C
1600 rpm
1600 rpm - 400 rpm 5 kg
1200 rpm
1200 rpm - 400 rpm 9 kg
1600 rpm
1600 rpm - 400 rpm 9 kg
1600 rpm
1600 rpm - 400 rpm 9 kg
Synthetics
Delicates
40 °C
60 °C - Cold
40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm 4 kg
1200 rpm
1200 rpm - 400 rpm 4 kg
ENGLISH 27
Programme
Wool/Silk
Steam
20min 3kg
Default tempera‐ ture
Temperature range
40 °C
40 °C - Cold
-
30 °C
40 °C - 30 °C
Reference spin speed
Spin speed range
Maximum load
1200 rpm
1200 rpm - 400 rpm 2 kg
1.5 kg
1200 rpm
1200 rpm - 400 rpm 3 kg
Outdoor
Jeans
30 °C
40 °C - Cold
40 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm
2.5 kg1)
1 kg2)
1200 rpm
1200 rpm - 400 rpm 9 kg
Anti-Allergy
Rinse
-
60 °C
-
1600 rpm
1600 rpm - 400 rpm 9 kg
1600 rpm
1600 rpm - 400 rpm 9 kg
9 kg Drain -
Spin
-
1600 rpm
1600 rpm - 400 rpm 9 kg
Machine Clean
60 °C
1200 rpm
1200 rpm - 400 rpm -
1) Washing programme.
2) Washing programme and waterproofing phase.
Programme options compatibility
When you set a washing programme and enter the menu , the dis‐ play shows the available options only.
Child Lock, Delay Start and Memory are selectable with all programmes.
OKOPower ■ ■ ■ ■ ■
28 www.electrolux.com
ColourPro
Cottons
Cottons Eco ■
Synthetics ■
Delicates ■
■
■
Wool/Silk
Steam
20min 3kg
Outdoor
Jeans
Anti-Allergy
■
Rinse
Drain
Spin
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Machine
Clean
■
1) If you set the shortest duration, we recommend that you decrease the load size. It is pos‐ sible to fully load the appliance, however the washing results can be less satisfactory.
2) This option is not available with a temperature lower than 30 °C.
3) This option is not available with temperature lower than 40 °C.
12. OPTIONS
12.1 Introduction
1h07min
When you enter the menu
More, the display will show only the options available for the programme set.
Max 9.0 Kg
Cottons
40
1200
More
■
■
■
■
■
■
■
■
■
■
■
When an option shortcut is on the programme summary screen, just tap on it to enter the relevant option submenu directly.
To turn an option on/off or to enter the option submenu, tap on the option bar.
To exit the option submenu, tap on the option bar again.
<Cottons 40
Stain Remover
Extra Rinse
2h24min
1/2
+1
<OFF
To return to the programme summary screen, tap on the programme bar.
<Cottons 40
Child Lock
Delay Start
Time Save
Temperature
Spin Speed
+1 +2>
1h07min
OFF
00h00min
OFF
40
1200
12.2 Child Lock
With this option you can prevent the children from accidentally operating the appliance.
To activate this option:
• Tap on the Child Lock bar, the appliance goes back to programme summary screen automatically and the shortcut comes on.
You can activate this option:
• After you have pressed the Start/
Pause button: Start/Pause button and the touch screen are deactivated. It is possible to turn the appliance off by means of the On/Off button.
ENGLISH
• Before pressing the Start/Pause button: the appliance cannot start.
The appliance keeps the selection of this option after you switch it off.
To deactivate this option:
• Keep the shortcut pressed for 3 seconds until it goes off.
29
If the shortcut is on, you can activate this option by tapping on the shortcut without entering the More menu. Refer to "Shortcuts" in chapter "Settings".
12.3 Delay Start
With this option you can delay the start of a programme to a more convenient time.
1. Tap on the Delay Start bar to enter the submenu.
2. Scroll left or right the hour and/ minute bars to set the desired delay start.
When you return to programme summary screen, the indicator and the set delay time appear alternating with the indicator and the programme duration.
After touching the Start/Pause button, the appliance begins the countdown and the door is locked.
12.4 Time Save
With this option you can decrease the programme duration (OFF= normal programme duration).
1. Tap on the Time Save bar to enter the submenu.
2. Scroll the submenu bar right to set:
• Quick option (Mid): if your laundry is normally or lightly soiled, it may be advisable to shorten the washing programme.
• Extra Quick option (Max): in case of smaller load.
When you return to programme summary screen, the indicator Quick or
30 www.electrolux.com
Extra Quick appears replacing the indicator and the programme duration is updated.
12.5 Temperature
When you select a washing programme, the appliance automatically proposes a default temperature.
1. Tap on the Temperature bar to enter the submenu.
2. Scroll the submenu bar to set the desired temperature. Cold= Cold wash.
When you return to programme summary screen, the set temperature will be shown.
12.6 Spin Speed
When you set a programme, the appliance automatically selects the maximum spin speed.
1. Tap on the Spin Speed bar to enter the submenu.
2. Scroll the submenu bar right or left to:
• Decrease the spin speed;
The display shows only the spin speeds available for the set programme.
• or activate the Rinse & Hold
option ;
When you return to programme summary screen, the indicator shows up.
The water of the last rinse is not drained out to prevent the fabrics from creasing. The washing programme ends with water in the drum and the final spin phase is not performed.
The door stays locked.
The drum turns regularly to reduce creasing. You must drain the water to unlock the door.
Touch the Start/Pause button: the appliance performs the spinning phase and drains the water.
• or activate the Extra Silent option.
When you return to programme summary screen, the indicator will be on.
All spinning phases (intermediate spin and final spin) are suppressed and the programme ends with water in the drum. This helps to reduce creasing.
As the programme is very quiet, it is suitable for use at night time when cheaper electricity tariffs are available. In some programmes the rinses are performed with more water.
The door stays locked.
The drum turns regularly to reduce creasing. You must drain the water to unlock the door.
Touch the Start/Pause button: the appliance performs the draining phase only.
The appliance empties the water out automatically after approximately 18 hours.
12.7
Eco
Set this option for slightly or normally soiled items washed at 30°C or higher temperatures.
Tap on the Eco bar to turn the option on.
The appliance decreases the washing temperature and extends the washing time to obtain a good washing efficiency by saving energy.
When you return to programme summary screen, the shortcut will be on.
12.8 Stains
1. Tap on the Stains bar to enter the submenu.
2. Tap on the bar of the option you want to set:
• Stains
Select this option to pre-treat heavily soiled or stained laundry using stain remover.
Pour the stain remover into compartment . The stain remover is pre-mixed and heated with detergent in order to improve its effectiveness.
This option can increase the programme duration.
This option is not available with a temperature lower than
40 °C.
• Prewash
Use this option to add a prewash phase at 30 °C before the washing phase.
This option is recommended for heavily soiled laundry, especially if containing sand, dust , mud and other solid particles.
Put the detergent for prewash in a dosing ball inside the drum.
This option can increase the programme duration.
• Soak
Use this function for heavy soiled garments. The appliance soaks the laundry at 30°C for about half an hour before washing.
When you return to programme summary screen, the shortcut will be on.
12.9 Extra Rinse
With this option you can add up to 3 rinses accordingly to the selected washing programmes.
Useful for people allergic to detergents and with sensitive skin.
1. Tap on the Extra Rinse bar to enter the option submenu.
2. Scroll the bar right to add from 1, 2 or
3 additional rinses (OFF= no additional rinse).
When you return to programme summary screen, the shortcut will be on. The dots indicate the number of additional rinses selected.
This option increases the programme duration.
ENGLISH 31
If the Extra Rinse is set as a default option and you select a compatible washing programme, the touch screen will show . In this case, by setting the Extra
Rinse option , it is possible to add just one rinse .
12.10 Plus Steam
This option adds a steam phase followed by a short anti-crease phase at the end of the washing programme.
The steam phase reduces fabric creasing and facilitates the fabric ironing.
Tap on the Plus Steam bar to activate the option (ON status).
This option can increase the programme duration.
A small laundry load helps to reach better results.
When you return to programme summary screen, the shortcut will be on.
12.11 Soft Plus
Set the Soft Plus option to optimise the fabric softener distribution and improve the fabric softness.
It is suggested when using the fabric softener and especially when the drum is full and the laundry is very soiled.
This option increases slightly the programme duration.
Tap on the Soft Plus bar to activate the option (ON status).
When you return to programme summary screen, the shortcut will be on.
12.12 Anti-crease
When this option is set, at the end of the cycle the drum performs smooth movements for about 30 minutes to favour the garments softness.
32 www.electrolux.com
Tap on the Anti-crease bar to activate the option (ON status).
When you return to programme summary screen, the shortcut will be on.
12.13 Steam Level
With this option you can change the steam level depending on the laundry size.
1. Tap on the Steam Level bar to enter the submenu.
2. Scroll the list right or left to set one of the following levels:
• Minimum
• Medium
• Maximum
This is available with the
Steam programme only.
12.14 Memory
With this option it is possible to save the two most used washing programmes.
To save your favourite programmes:
1. First set the washing programme and the desired options.
2. Tap on the Memory bar to enter the submenu.
3. Tap on the Memory 1 or Memory 2 to save the set programme. The status will change from Empty to In
Use .
When you return to programme list screen, the M1 or M2 will be on next to the programme name when you set it.
Afterwards, each time you turn the appliance on, the
M1 and/or M2 programmes appear among the first five programmes automatically proposed by the appliance and you can set them in the programme list screen directly.
1h07min
Settings
Cottons
Cottons
Cottons Eco
Synthetics
M1
40
1200
More
To change a saved programme:
1. First set the washing programme and the desired options.
2. Tap on the Memory bar to enter the submenu.
3. Tap on the Memory 1 or Memory 2 bar with In Use status. A message pops up asking if you want to empty or replace the saved programme.
4. Tap on Replace.
To cancel a saved programme:
1. Tap on the Memory bar to enter the submenu.
2. Tap on the Memory 1 or Memory 2 bar. A message pops up asking if you want to empty or replace the saved programme.
3. Tap on Empty. M1 or M2 will disappear in the programme list screen.
12.15 Remote Start Mode
The remote start is available after you have completed the App installing and downloading and washing machine wireless connection. Refer to "Wi-Fi
Connectivity setup" chapter.
With this option you can start a washing programme remotely.
Tap on the Remote Start Mode bar to activate it.
When you return to programme summary screen, the shortcut will be on and the door will be locked.
If Remote Start Mode is activated, the Stand-by function doesn't deactivate the appliance.
ENGLISH 33
13. DAILY USE
WARNING!
Refer to Safety chapters.
13.1 Using weight sensors
For a correct use of the weight sensor, the drum must be empty when activating the appliance.
Set the programme
BEFORE you put the laundry in the drum.
13.2 Before activating the appliance
1. Make sure that the mains plug is connected to the mains socket.
2. Make sure that the water tap is open.
13.3 Activating the appliance and setting a programme
Press the On/Off button to turn the appliance on.
Press the On/Off button to activate the appliance again.
The display shows the end of the last set programme.
Turn the programme dial to set a new cycle.
If you set a programme or an option that ends with water in the drum, the Stand-by function doesn't deactivate the appliance to remind you to drain the water.
If Remote Start Mode is activated, the Stand-by function doesn't deactivate the appliance.
13.5 Setting a programme
1. Turn the programme dial to set the desired programme.
OKOPower
ColourPro
Cottons
Cottons Eco
Synthetics
3h01min
40
1200
More
A short tune sounds (if activated). The appliance proposes Cottons as default programme.
The led of Start/Pause button flashes.
13.4 Stand-by function
The Stand-by function automatically deactivates the appliance to decrease the energy consumption when:
• You do not use the appliance for 5 minutes before pressing the Start/
Pause button and turning the appliance on.
Press the On/Off button to activate the appliance again.
• After 5 minutes from the end of the washing programme.
Or just tap on the programme name in the programme summary window to return to the programme list window and scroll the programme list up or down to set the desired programme.
2. After a few seconds the display shows programme summary screen indicating the maximum load, the default temperature, the maximum spin speed and the programme duration.
3. You can tap on the Temperature bar to change the water temperature.
34 www.electrolux.com
4. You can tap on the Spin Speed bar to change the spin speed or to set
Rinse & Hold or Extra Silent option.
5. You can tap on More to enter the menu of the additional available options and set one or more of them.
Afterwards, the shortcuts of the set options show up on the programme summary screen.
13.6 Loading the laundry
1. Open the appliance door.
The weight sensor window pops up.
Cottons 40
9 kg
Ready to start
2. Shake the garments before you put them in the drum.
3. Put the laundry in the drum, one item at time.
On the display the weight of the laundry is updated by steps of 0.5 kg and the programme duration is updated accordingly when you return to the programme summary screen.
If you put in the drum more laundry than the maximum load, the display tells that the suggested load has been exceeded.
You can wash your laundry anyway, but the water and energy consumption increase.
To have the best consumption and washing performance remove the excess items.
The overload indication is shown only in programmes with a maximum load lower than the appliance maximum load.
4. Close the door. Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry.
5. If you have already set Detergent
Type 1 or Detergent Type 2 with average suggested dosage for the type of detergent you are using , the appliance recommends the detergent quantity to pour.
Cottons 40
Detergent advice:
60ml / 50ml
Type 1 / Type 2
Ready to start
Refer to the "Detergent Dosing" section in the chapter "Settings".
If you change the washing programme after closing the door, the display may tell you that the laundry is now exceeding the maximum recommended load for the new programme: open the door and remove a few garments.
13.7 Filling the detergent and additives
We recommend that you do not exceed the maximum indicated level ( ).
1. Open the detergent dispenser.
ENGLISH 35
Max
▼
M ax
▼
Sal t
Ma x
▼
M ax
▼
t
Sal
Max
▼
Ma x
▼
2. Put the powder detergent in the compartment . If using liquid detergent, refer to 'Filling the liquid detergent'.
Filling the liquid detergent
1. Insert the proper container for liquid detergent.
Max
▼
Ma x
▼
Max
▼
M ax
▼
Sal t
Ma x ▼
M ax
▼
Ma x▼
Salt
Ma x▼
Ma x▼
t
Sal
3. If desired, pour the fabric softener in the compartment .
2. Pour the liquid detergent in the compartment .
M ax
▼
Max
▼
Max
▼
Li qu id
Ma x
▼
t
Sal
4. Close the detergent dispenser.
3. Close the detergent dispenser.
13.8 Starting a programme
1. Touch the Start/Pause button to start the programme.
The related led stops flashing and stays on.
The door is locked.
The window describing the running programme pops up, showing:
36 www.electrolux.com
• The programme name.
• The remaining time to programme end.
• The progress bar.
• The ProSense phase first and then the running programme phase.
• The indicator . When it is on, it is still possible to stop the cycle and add clothes.
• The door locked indicator , when the indicator goes off.
• The estimated cycle end time.
• The shortcut .
Cottons 40
3h01min
Washing
Finished at 15:42
The drain pump can operate shortly before the appliance fills water.
2. If necessary, tap on to enter the option list and activate the Child
Lock option. Refer to "Child Lock" section in the "Options" chapter.
The shortcut shows up. Keep pressed for about three seconds to deactivate the Child Lock.
Starting a programme with delay start
1. Touch the Start/Pause button to start the programme.
The related led stops flashing and stays on.
The door is locked.
The appliance starts the countdown and the door is locked.
Cottons 40
Starts in
1h29min
Reset
Finished at 15:36
2. Tap on Reset to cancel the delay start and then touch the Start/Pause button or wait until the countdown is completed.
The programme will start normally.
The ProSense detection starts at the end of the countdown.
During the cycle, the display will inform you about each running phase (e.g. washing, rinsing and so on).
13.9 The ProSense load detection
After touching the Start/Pause button:
1. The ProSense starts the laundry load detection to calculate the real programme duration. The display shows the message Adjusting
programme to current load.
The appliance adjusts automatically the programme duration to the load to achieve perfect washing results in the minimum possible time. The programme duration could increase or decrease.
2. After about 20 minutes the display shows the new programme duration, the expected programme time and advise you about the running phase.
The ProSense detection is carried out with complete washing programmes only.
13.10 Interrupting a programme and changing the options
When the programme is running, you can change only some options:
1. Touch the Start/Pause button .
The related led start flashing.
2. Tap on to change the options.
In the option list only the available options will be active.
3. Touch the Start/Pause button again.
The washing programme continues and the programme duration can change.
13.11 Cancelling a running programme
1. Press the On/Off button to cancel the programme and to deactivate the appliance.
2. Press the On/Off button again to activate the appliance.
Now, you can set a new washing programme.
If the ProSense phase is already carried out and the water filling is already started, the new programme starts without repeating the
ProSense phase. The water and the detergent are not drained out in order to avoid waste.
13.12 Opening the door
If the temperature and level of the water in the drum are too high and/or the drum still rotates you cannot open the door.
If is on: the water temperature and level are not high and it is still possible to open the door and add clothes.
While a programme or the delay start operates, the appliance door is locked.
1. Touch the Start/Pause button .
In the display the related door lock indicator goes off.
2. Open the appliance door. If necessary, add or remove the items.
3. Close the door and touch the Start/
Pause button.
The programme or the delay start continues.
ENGLISH
13.13 End of the programme
37
When the programme has finished, the appliance stops automatically. The acoustic signals operate (if they are active).
The display tells that the cycle is finished and shows 0h00min.
The Start/Pause button goes off.
The door unlocks and the indicator goes off.
1. Press the On/Off button to deactivate the appliance.
After five minutes after the end of the programme, the energy saving function automatically deactivates the appliance.
When you activate the appliance again, the display shows the end of the last selected programme. Turn the programme dial to set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent dispenser slightly ajar to prevent mildew and odours.
5. Close the water tap.
13.14 Draining water out after end of cycle
If you have chosen a programme or an option that does not empty out the water of the last rinse, the programme is completed, but:
• The display shows 0 min and the
Start/Pause button starts flashing.
• The drum still turns at regular intervals to prevent the creases in the laundry.
• The indicator is still on and the door stays locked.
• You must drain the water to open the door:
1. Touch the Start/Pause button:
• If you have set , the appliance drains the water and spins.
38 www.electrolux.com
• If you have set , the appliance only drains the water.
2. If necessary, change the spin speed proposed by the appliance: touch the
Start/Pause button to pause the programme; tap on and then on the Spin Speed bar.
3. When the programme is completed and the door locked indicator goes off, you can open the door.
14. SETTINGS
14.1 Introduction
1. In the programme summary screen, just tap on the screen to return to the programme list screen.
2. Scroll the list up or down to find
Settings.
Spin
Machine Clean
Settings
OKOPower
ColourPro
3. Tap on the shortcut to enter the setting menu.
4. Scroll the setting list up or down to find the setting you want to change.
14.2 Set Clock
To change the time:
1. Tap on the Set Clock bar to enter the submenu.
2. Scroll the minute and the hour bars right or left to set the current time.
<Programmes Info
Set Clock 01h00min
4. Press the On/Off button for a few seconds to deactivate the appliance.
In any case, the appliance empties the water out automatically after approximately 18 hours.
14.3 Set Language
To change the language:
1. Tap on the Language bar.
2. Scroll the language list up or down to find the desired language and hold it pressed.
Back
Svenska
Deutch
English
Italiano
Francais
Language
SV
DE
EN
IT
FR
3. The screen returns to the setting list automatically. Tap on the
Programmes bar to return to the programme summary screen.
14.4 Display Brightness
You can regulate the display brightness through 5 brightness levels.
To change the display brightness:
1. Tap on the Display Brightness bar.
2. Scroll the brightness level bar right or left to find the desired level.
<Programmes Info
4 < 24 01 h 02 >
< 59 00 min
01 >
3. Tap on the Set Clock bar to return to the machine setting list or tap on the
Programmes bar to return to the programme summary screen.
< 3 4 5 >
3. Tap on the Display Brightness bar to return to the machine setting list or tap on the Programmes bar to return to the programme summary screen.
14.5 Cycle End Buzzer
A buzzer sounds at the end of a cycle.
To deactivate the buzzer or to change its duration:
1. Tap on the Cycle End Buzzer bar.
2. Scroll the bar right or left to set the desired set:
• OFF
• Short
• Mid
• Long
3. Tap on the Cycle End Buzzer bar and then to the Programmes bar to return to the programme summary screen.
If the Cycle End Buzzer is on, the screen shows the shortcut (buzzer on) or
(buzzer off). Refer to "Shortcuts" section in this chapter.
14.6 Water Hardness
To set the proper water hardness level, read the
"The Water Softener
(SoftWater Technology)" chapter carefully.
To change the water hardness:
1. Tap on the Water Hardness bar.
2. Scroll right or left to set the proper water level.
<Programmes Info
Buzzer
Water Hardness
OFF
6
<5 6 7>
3. Tap on the Set Clock bar to return to the machine setting list or tap on the
Programmes bar to return to the programme summary screen.
ENGLISH 39
14.7 Extra Rinse Default
With this option you can permanently have two additional rinses each time you switch the appliance on and if you set a compatible programme.
To activate/deactivate this option:
1. Tap on the Extra Rinse Default bar
(ON status).
2. Tap on the Programmes bar to return to the programme summary screen.
If the Extra Rinse Default is active, the screen will show and by setting the
Extra Rinse option, it will be possible to add just one rinse .
If the Extra Rinse Default is activated, the screen will also show the shortcut .
Refer to "Shortcuts" section in this chapter.
14.8 Soft Plus Default
Set the Soft Plus Default to optimise the fabric softener distribution and improve the fabric softness. The Soft Plus option remains permanently on.
It is suggested when using the fabric softener and especially when the drum is full and the laundry is very soiled.
This option increases slightly the programme duration.
To activate/deactivate this option:
1. Tap on the Soft Plus Default bar
(ON status).
2. Tap on the Programmes bar to return to the programme summary screen.
If Soft Plus Default is active, the shortcut will be on if you set a compatible programme.
14.9 Detergent Dosing
Through this setting you can save the average detergent dosage suggested in the detergent packaging, so the appliance will advise you about the
40 www.electrolux.com
necessary detergent dosage for your cycles.
It is possible to set two types of detergent: e.g., the value entered in
Detergent Type 1 could refer to powder detergent and the value entered in
Detergent Type 2 could refer to liquid detergent.
1. Tap on the Detergent Dosing.
2. Tap on the Detergent Type 1 or
Detergent Type 2 bar.
Info
OFF
Detergent Dosing
Detergent Type 1
Detergent Type 2
3. Scroll the bar right or left to set the average detergent dosage in ml as suggested on the detergent packaging.
Info
Detergent Type 1
OFF
<40 50 ml
60>
4. Tap on the Detergent Dosing bar to return to the machine setting list or tap on the Programmes bar to return to the programme summary screen.
14.10 Water Softener
Read the "The Water
Softener (SoftWater
Technology)" chapter carefully.
With this setting you can decide when the water softener function should operate:
1. Tap on the Water Softener bar.
<Programmes
Water Softener
Info
Wash
< Wash >
2. Scroll the submenu bar right or left to set:
• OFF: the water softener function is deactivated.
• Wash: the water softener function is active during washing phase only (factory setting).
• Wash & Rinse: the water softener function is active during washing and rinsing phase.
This setting increases the salt consumption.
3. Tap on the Water Softener bar to return to the machine setting list or tap on the Programmes bar to return to the programme summary screen.
14.11 Service
This area is reserved for the Authorized
Service.
Back Services
Reserved for service
0 1 2 3 4
5 6 7 8 9
< OK
14.12 Shortcuts
This setting allows to bring the shortcuts shown in the next drawing visible on the summary screen.
To activate the shortcuts:
1. Tap on the Shortcuts bar to open the list of the available shortcuts.
<Back Shortcuts
Child Lock
Extra Rinse Shortcut
Buzzer Shortcut
OFF
OFF
OFF
2. Tap on the bar of the desired shortcut/shortcuts by changing the status to ON.
3. Tap on <Back to return to machine setting list and on Programmes to return to summary screen.
The shortcut shows up on bottom.
3h01min
ENGLISH 41
To find the desired description, e.g.:
1. Tap on the Machine Information bar.
2. Tap on 1. Programmes bar.
3. Tap on Cottons bar and the relevant description will appear.
14.14
DEFAULT
Factory Reset
Factory Reset restores the original factory settings.
To return to the factory settings:
1. Tap on the Factory Reset bar.
The following window pops up.
Max 9.0 Kg
Cottons
40
1200
More
The shortcut appears when the relevant option is set.
14.13 Machine Information
Here you can find a short description about all programmes, options and settings.
15. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
15.1 The laundry load
• Divide the laundry into: white, coloured, synthetics, delicates and wool.
• Follow the washing instructions on the laundry care labels.
• Do not wash white and coloured items together.
• Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first couple of times.
• Button up pillowcases, close zippers, hooks and poppers. Tie up belts.
Do you want to clear all your programmed settings?
Cancel OK
2. Tap on OK to return to factory settings or on Cancel to keep the current settings.
• Empty pockets and unfold.
• Turn multilayered fabrics, wool and items with printed illustrations inside out.
• Pre-treat tough stains.
• Wash heavy soil stains with a special detergent.
• Be careful with curtains. Remove the hooks and put the curtains in a washing bag or pillowcase.
• Do not wash laundry without hems or with cuts.
• Use a washing bag to wash small and/or delicate items (e.g. underwired bras, belts, tights, etc. ).
• A very small load can cause balance problems with the spin phase leading to excessive vibration. If this occurs:
42 www.electrolux.com
a. interrupt the programme and open the door (refer to "Daily
Use" chapter);
b. manually redistribute the load so that the items are spaced evenly around the tub;
c. press the Start/Pause button.
The spin phase continues.
15.2 Stubborn stains
For some stains, water and detergent is not sufficient.
We recommend that you pre-treat these stains before you put the items in the appliance.
Special stain removers are available.
Use the special stain remover that is applicable to the type of stain and fabric.
15.3 Detergents and other treatments
• Only use detergents and other treatments specially made for washing machines:
– powder detergents for all types of fabric, excluding delicate. Prefer powder detergents containing bleach for whites and laundry sanitization
– liquid detergents, preferably for low temperature wash
16. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
16.1 External cleaning
Clean the appliance with mild soap and warm water only. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents or chemical products.
CAUTION!
Do not clean the metal surfaces with chlorine-based detergent.
programmes (60 °C max) for all types of fabric, or special ones for woollens only.
• Do not mix different types of detergents.
• To help the environment, do not use more than the recommended quantity of detergent.
• Follow the instructions that you find on packaging of the detergents or other treatments without exceeding the indicated maximum level ( ).
• Use the recommended detergents for the type and colour of the fabric, the programme temperature and the level of soil.
15.4 Ecological hints
• Set a programme without the prewash phase to wash laundry with normal soil.
• Always start a washing programme with the maximum load of laundry allowed.
• If you pre-treat the stains, you can use a stain remover when you set a programme with a low temperature.
• To use the correct quantity of detergent, refer to the quantity suggested by the detergent producer.
16.2 Descaling
If you use the salt regularly to activate the
SoftWater Technology, the descaling procedure described in this paragraph is not necessary.
If the water hardness in your area is high or moderate, we recommend that you use a water descaling product for washing machines.
Regularly examine the drum to check for limescale.
The regular detergents already contain water softening agents, but we recommend to run a cycle with empty drum and a descaling product occasionally.
Always follow the instructions that you find on the packaging of the product.
16.3 Maintenance wash
The repeated and prolonged use of low temperature and short programmes can cause detergent deposits, fluff residues and bacterial growth inside the drum and the tub. This could generate bad odours and mildew.
To eliminate these deposits and hygienize the inner part of the appliance, run a maintenance wash after about 60 cycles, especially when the message
Cleaning cycle recommended pops up on the display:
1. Remove all laundry from the drum.
2. Run the Machine Clean programme as described in the ‘Programmes’ chapter.
If the cleaning programme is postponed, the message keeps on popping up during next uses until it is run.
16.4 Door seal
ENGLISH 43
Rust deposits in the drum may occur due to rusting foreign body in the washing or tap water containing iron.
Clean the drum with special products for stainless steel.
Always follow the instructions that you find on the packaging of the product.
Do not clean the drum with acidic descaling products, scouring products containing chlorine or iron or steel.
For a thorough clean:
1. Clean the drum with special products for stainless steel.
Always follow the instructions that you find on the packaging of the product.
2. Run a short cotton programme at high temperature with empty drum and with a small quantity of powder detergent or, if available, run the
Machine Clean programme.
16.6 Cleaning the detergent dispenser and the salt compartment
Before cleaning, make sure that the all compartments are empty.
To prevent possible deposits of dried detergent, clotted fabric softener, formation of mould in the dispenser drawer and/or salt fouling in the salt compartment, once in a while carry out the following cleaning procedure:
1. Open the drawer. Press the catch as indicated in the picture and pull the drawer out.
Regularly examine the seal and remove all objects from the inner part.
16.5 Cleaning the drum
Regularly examine the drum to prevent unwanted deposits.
44 www.electrolux.com
Max
4. Make sure that all detergent residue is removed from the detergent conveyor. Use a cloth.
Ma
Max
▼
Salt
Max
▼
2. Remove the insert for the softener and, if inserted, the container for liquid detergent.
Max
▼
Ma x▼
Max
▼
Salt
Max
▼
Max
▼
Max
▼
Salt
5. Make sure that all detergent residue is removed from the upper and lower part of the recess. Use a small brush to clean the recess.
Max
▼
Ma x
▼
M ax
▼
t
Sal
3. Wash the drawer and all inserts under running water.
Max
▼
Max
▼
6. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum.
Max
▼
Ma x
▼ ax
M
▼
Sal t
16.7 Cleaning the drain pump
WARNING!
Disconnect the mains plug from the mains socket.
ENGLISH 45
Regularly check the drain pump filter and make sure that it is clean.
Clean the drain pump if:
• The appliance does not drain the water.
• The drum does not turn.
• The appliance makes an unusual noise because of the blockage of the drain pump.
• The message Check that the drain filter is not clogged pops up.
WARNING!
• Do not remove the filter while the appliance operates.
• Do not clean the pump if the water in the appliance is hot. Wait until the water cools down
Proceed as follows to clean the pump:
1. Open the pump cover.
4. Turn the filter 180 degrees in anticlockwise direction to open it, without removing. Let the water flow out.
2
1
2. Place a suitable bowl below the drain pump access to collect the water that flows out.
3. Open the chute downwards. Always keep a rag nearby to dry up any water spillages when removing the filter.
5. When the bowl is full of water, turn the filter back and empty the container.
6. Repeat the steps 4 and 5 until the water stops to flow out.
7. Turn the filter anti-clockwise to remove it.
1
2
8. If it is necessary, remove fluff and objects from the filter recess.
9. Make sure that the impeller of the pump can rotate. If it does not rotate,
46 www.electrolux.com
contact the Authorised Service
Centre.
10. Clean the filter under the water tap.
11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages.
2
2
1
When you drain the water with the emergency drain procedure, you must activate the drain system again:
a. Put 2 litres of water in the main wash compartment of the detergent dispenser.
b. Start the programme to drain the water.
16.8 Cleaning the inlet hose and the valve filter
It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time:
1. Remove the inlet hose from the tap and clean the filter.
1
1
12. Close the pump cover.
2
3
2. Remove the inlet hose from the appliance by loosening the ring nut.
3. Clean the valve filter on the back of the appliance with a toothbrush.
4. When you reconnect the hose to the back of the appliance, turn it left or right (not in vertical position) depending on the position of your water tap.
20°
45°
16.9 Emergency drain
ENGLISH 47
If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump.
When you drain the water with the emergency drain procedure, you must activate the drain system again:
1. Put 2 litres of water in the main wash compartment of the detergent dispenser.
2. Start the programme to drain the water.
16.10 Frost precautions
If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump.
1. Disconnect the mains plug from the mains socket.
2. Close the water tap.
3. Put the two ends of the inlet hose in a container and let the water flow out of the hose.
4. Empty the drain pump. Refer to the emergency drain procedure.
5. When the drain pump is empty, install the inlet hose again.
WARNING!
Make sure that the temperature is higher than 0
°C before you use the appliance again.
The manufacturer is not responsible for damages caused by low temperatures.
17. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
17.1 Introduction
WARNING!
Deactivate the appliance before carrying out any check.
48 www.electrolux.com
The appliance does not start or it stops during operation.
First try to find a solution to the problem
(refer to the "Possible failures" table). If the problem persists, contact the
Authorised Service Centre.
In case of major problems, the buzzer operates, an alarm message pops and
the Start/Pause button may flash
continuously, e.g.:
• Check that the water inlet tap is
open - The appliance does not fill with water properly.
• Check that the drain filter is not
clogged - The appliance does not drain the water.
• Check that the door is properly
closed - The appliance door is open or not closed correctly. Please check the door!
If the appliance is overloaded, remove some items from the drum and/or keep the door pressed while pressing the Start/Pause button until the indicator
stops flashing (see the picture below).
• Programme will continue when
electricity supply is stable - The mains supply is unstable. Wait until the mains supply is stable.
• A water leak has been detected -
The anti-flood device is on.
Disconnect the appliance and close the water tap. Contact the Authorised
Service Centre.
• Cleaning cycle recommended - Run the Machine Clean programme as described in ‘Programmes’ chapter. If the cleaning programme is postponed, the message keeps on popping up during next uses until it is run.
If the cleaning programme is postponed, the message keeps on popping up during next uses until it is run.
ENGLISH 49
17.2 Possible failures
Problem
The programme does
The appliance fills with water and drains imme‐ diately
The spin phase does not operate or the washing cycle lasts lon‐ ger than usual.
There is water on the floor.
not start.
The appliance does not fill with water properly.
The appliance does not drain the water.
Possible solution
• Make sure that the mains plug is connected to the mains socket.
• Make sure that the appliance door is closed.
• Make sure that there is no damaged fuse in the fuse box.
• Make sure that the Start/Pause has been touched.
• If the delay start is set, cancel the setting or wait for the end of countdown.
• Deactivate the Child Lock function if it is on.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the inlet hose has no kinks, damages or bends.
• Make sure that the connection of the water inlet hose is correct.
• Make sure that the filter of the inlet hose and the filter of the valve are not clogged. Refer to 'Care and cleaning'.
• Make sure that the drain hose is in the correct position.
The hose may be positioned too low. Refer to "Installa‐ tion instruction".
• Make sure that the sink spigot is not clogged.
• Make sure that the drain hose has no kinks or bends.
• Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to "Care and cleaning".
• Make sure that the connection of the drain hose is cor‐ rect.
• Set the drain programme if you set a programme with‐ out drain phase.
• Set the drain programme if you set an option which ends with water in the tub.
• Set the spin programme.
• Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to "Care and cleaning".
• Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems.
• Make sure that the couplings of the water hoses are tight and there is not water leakages.
• Make sure that the water inlet hose and the drain hose have no damages.
• Make sure you use the correct detergent and the correct quantity of it.
50 www.electrolux.com
Problem
You cannot open the appliance door.
The message "Failed to connect to your WiFi" appears on the screen.
The App cannot con‐ nect to the appliance.
The App cannot fre‐ quently connect to the appliance.
The appliance makes an unusual noise and vibrates.
The programme dura‐ tion increases or de‐ creases during pro‐ gramme execution.
Possible solution
• Make sure that a washing programme that ends with water in tub, has been selected.
• Make sure that the washing programme is finished.
• Set the drain or the spin programme if there is water in the drum.
• Make sure that the appliance receives electrical power.
• This problem may be caused by a failure of the appli‐ ance. Contact the Authorised Service Centre.
If you need to open the door, please read carefully
"Emergency door opening".
• Make sure that the Remote Start Mode is not activated.
Deactivate it.
• Check the wireless signal.
• Check your home network and router.
• Restart the router.
• Contact your wireless service provider if there are fur‐ ther problems with the wireless network.
• Check the wireless signal.
• Check if your smart device is connected to the wireless network.
• Check your home network and router.
• Restart the router.
• Contact your wireless service provider if there are prob‐ lems with the wireless network.
• The appliance, the smart device, or both, need to be configured again because a new router has been instal‐ led or the router configuration has been changed.
• Make sure that the wireless signal reaches the appli‐ ance. Try to move the home router as near the appli‐ ance as possible or consider purchasing a wireless range extender.
• Make sure the wireless signal is not disrupted by micro‐ wave. Turn the microwave off. Avoid using the micro‐ wave and the remote control at the same time.
• Make sure the levelling of the appliance is correct. Refer to "Installation instruction".
• Make sure that the packaging and/or the transit bolts are removed. Refer to "Installation instruction".
• Add more laundry in the drum. The load may be too small.
• The ProSense function is able to adjust the programme duration according to the type and the laundry load size.
Refer to "The ProSense load detection" in "Daily Use" chapter.
ENGLISH 51
Problem
The washing results are not satisfactory.
Too much foam in the drum during the wash‐ ing cycle.
Possible solution
• Increase the detergent quantity or use a different deter‐ gent.
• Use special products to remove the stubborn stains be‐ fore you wash the laundry.
• Make sure that you set the correct temperature.
• Decrease the laundry load.
• Make sure that no other type of detergent has been
Salt
poured the compartment . In this case, refer to "Elimi‐ nating detergent or other additives from salt compart‐ ment'.
• Make sure that no salt has been poured in the compart‐ ment . If it happens, run a rinse cycle or run the washing cycle again.
• Reduce the quantity of detergent.
Excessive consumption of salt.
The drum is empty and the display shows there is some weight in.
• Check if the water softener has been set to act also dur‐ ing rinse phase. Refer to "How to set the water hard‐ ness level" in "The Water Softener (SoftWater Technol‐ ogy)" chapter.
• Press the On/Off button to deactivate the appliance and activate it again to set a tare.
The drum is full but the display shows 0.0 kg.
• You loaded the laundry before activating the appliance.
Press the On/Off button to deactivate the appliance.
• Empty the drum and follow the necessary steps. (Refer to "Loading the laundry")
After the check, activate the appliance. The programme continues from the point of interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre.
17.3 Emergency door opening
In case of power failure or functioning failure the appliance door remains locked. The washing programme continues when the power is restored. If the door remains locked in case of failure, it is possible to open it using the emergency unlock function.
Before opening the door:
CAUTION!
Risk of burns! Make sure that the water temperature is not too high and the laundry is not hot. If necessary, wait until they cool down.
52 www.electrolux.com
CAUTION!
Risk of injury! Make sure that the drum is not rotating. If necessary, wait until the drum stops rotating.
Make sure that the water level inside the drum is not too high. If necessary, proceed with an emergency drain (refer to
«Emergency drain» in
«Care and cleaning» chapter).
To open the door, proceed as follows:
1. Press the On/Off button to switch the appliance off.
2. Disconnect the mains plug from the mains socket.
3. Open the filter flap.
4. Pull the emergency unlock trigger downward once. Pull it downward once again, keep it tensed and, in the meanwhile, open the appliance door.
5. Take out the laundry and then close the appliance door.
6. Close the filter flap.
17.4 Eliminating detergent or other additives from salt compartment
Salt
Any type of detergent and additives inadvertently poured in the compartment
Salt
must be eliminated completely.
If this happens, please proceed as follows:
1. Pull the drawer out.
Max
Max
▼
Salt
Ma x ▼
Max
▼
2. Eliminate any trace of detergent or additive and clean the compartment thoroughly.
3. Insert the drawer back and pour salt
Salt
in the compartment
4. Close the drawer.
.
5. Run a cotton or synthetic cycle, without reducing time, to restore the water softener function.
18. CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant stand‐ ards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply voltage and the temperature of inlet water may also affect the washing pro‐ gramme duration.
Technical specifications may be changed without prior notice to improve the quality of product.
ENGLISH 53
During the washing programme, the Prosense technology can vary the wash duration and the consumption values. For more details see 'The
Prosense load detection' paragraph in 'Daily Use' chapter.
Programmes
Cottons 60°C
Cottons 40°C
Synthetics 40°C
Delicates 40°C
Wool/Silk 30°C
Load
(kg)
9
9
4
4
2
Energy con‐ sumption
(kWh)
Water con‐ sumption
(litre)
1.65
1.20
0.72
0.60
0.35
90
90
55
60
58
Approxi‐ mate pro‐ gramme duration
(minutes)
220
210
160
120
60
Remain‐ ing mois‐ ture (%)1)
44
44
35
35
30
Standard cotton programmes2)
Standard 60°C cotton
9 0.33
54 268 44
Standard 60°C cotton
4.5
0.30
40 247 44
Standard 40°C cotton
4.5
0.31
40 234 44
1) At the end of spin phase.
2) The performance results and low energy consumption are guaranteed by the use of soft‐ ened water. To maintain this achievement over time, it is essential to set the right water hardness level by following the user manual instructions and use salt regularly for regener‐ ating the resins .
Off Mode (W)
0.30
Left On Mode (W)
Power consumption in networked standby (W)
Time to networked standby (min.)
0.30
2.00
15
The information given in the chart above is compliant with the EU Commission regu‐ lation 1015/2010 implementing directive 2009/125/EC and EU commission regulation
No. 1275/2008.
19. TECHNICAL DATA
Dimension Width/ Height/ Depth/
Total depth
600 mm/ 850 mm/ 630 mm/ 660 mm
54 www.electrolux.com
Electrical connection Voltage
Overall power
Fuse
Frequency
Level of protection against ingress of solid parti‐ cles and moisture ensured by the protective cov‐ er, except where the low voltage equipment has no protection against moisture
Water supply pressure Minimum
Maximum
230 V
2200 W
10 A
50 Hz
IPX4
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Cold water
Water supply 1)
Maximum Load Cotton
20.1 Available in www.electrolux.com/shop or from authorised dealer
9 kg
Energy Efficiency Class A+++
Spin Speed Maximum spin speed 1551 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
20. ACCESSORIES
20.3 Stacking kit
Only appropriate accessories approved by
ELECTROLUX ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated.
20.2 Fixing plate kit
If you install the appliance on a plinth, secure the appliance with the fixing plates.
Read carefully the instructions supplied with the accessory.
The tumble dryer can be stacked on the top of the washing machine only by
using the correct stacking kit manufactured and approved by
ELECTROLUX.
Verify the compatible stacking kit by checking the depth of your appliances.
The stacking kit can be used only with the appliances specified in the leaflet provided with the accessory.
Read carefully the instructions supplied with the appliance and with the accessory.
WARNING!
Do not put the tumble dryer under the washing machine.
20.4 Pedestal with the drawer
ENGLISH
To raise your appliance and make loading and unloading laundry easier.
The drawer can be used for laundry storage e.g.: towels, cleaning products and more.
Read carefully the instructions supplied with the accessory.
55
21. PRODUCT INFORMATION SHEET IN REFERENCE
TO E.U. REGULATION 1369/2017
Product Information Sheet
Trade Mark
Model
ELECTROLUX
WASL6IE300,
PNC914550917
9
A+++
Rated capacity in kg
Energy efficiency class
Energy consumption in kWh per year, based on 220 standard washing cycles for cotton programmes at 60
°C and 40 °C at full and partial load, and the con‐ sumption of the low-power modes. Actual energy con‐ sumption will depend on how the appliance is used.
Energy consumption of the standard 60°C cotton pro‐ gramme at full load in kWh
Energy consumption of the standard 60°C cotton pro‐ gramme at partial load in kWh
Energy consumption of the standard 40°C cotton pro‐ gramme at partial load kWh
76
0.33
0.30
0.31
56 www.electrolux.com
Power consumption of the off-mode in W
Power consumption in left-on mode in W
Water consumption in litres per year, based on 220 standard washing cycles for cotton programmes at 60
°C and 40 °C at full and partial load. Actual water con‐ sumption will depend on how the appliance is used.
Spin-drying efficiency class on a scale from G (least efficient) to A (most efficient)
Maximum spin speed in rpm
Remaining moisture content in %
The 'standard 60 °C cotton programme' and the
'standard 40 °C cotton programme' are the standard washing programmes to which the information in the label and the fiche relates, these programmes are suitable to clean normally soiled cotton laundry and they are the most efficient in terms of combined ener‐ gy and water consumption.
Programme time of the standard 60°C cotton pro‐ gramme at full load in minutes
Programme time of the standard 60°C cotton pro‐ gramme at partial load in minutes
Programme time of the "standard 40°C cotton pro‐ gramme at partial load in minutes
Duration of the left on mode in minutes
Airborne acoustical noise emission in db(A) washing
Airborne acoustical noise emission in db(A) spinning
Built in appliance Y/N
0.30
0.30
10499
A
1551
44
-
268
247
234
5
47
75
No
The information given in the chart above is compliant with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC .
22.
CH
GUARANTEE
Customer Service Centres
Industriestrasse 10
5506 Mägenwil
Point of Service
Le Trési 6
1028 Préverenges
Via Violino 11
6928 Manno
ENGLISH 57
Point of Service
Morgenstrasse 131
3018 Bern
Zürcherstrasse 204E
9000 St. Gallen
Seetalstrasse 11
6020 Emmenbrücke
Schlossstrasse 1
4133 Pratteln
Comercialstrasse 19
7000 Chur
Spare parts service Industriestrasse 10,
5506 Mägenwil, Tel. 0848 848 111
Specialist advice/Sale Badenerstrasse
587, 8048 Zürich, Tel. 044 405 81 11
Warranty For each product we provide a two-year guarantee from the date of purchase or delivery to the consumer
(with a guarantee certificate, invoice or sales receipt serving as proof). The
23. ENVIRONMENTAL CONCERNS
guarantee covers the costs of materials, labour and travel. The guarantee will lapse if the operating instructions and conditions of use are not adhered to, if the product is incorrectly installed, or in the event of damage caused by external influences, force majeure, intervention by third parties or the use of non-genuine components.
Recycle materials with the symbol .
Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
For Switzerland:
Where should you take your old equipment?
Anywhere that sells new equipment or hand it in to official SENS collection points or official SENS recycling firms.
The list of official SENS collection points can be found at www.erecycling.ch
*
58 www.electrolux.com
ENGLISH 59
www.electrolux.com/shop
electrolux.com/app
The software included in this product contains copyrighted software that is licensed under the BSD, GPL-2.0, LGPL-
2.0, LGPL-2.1, zLib, MIT, ISC, Apache 2.0 and others. It is possible to display the complete copy of the licenses in the Electrolux App that can be downloaded from the corresponding App store from the License menu section.
It is possible to download the source code of the open source software used in the product by searching for Wi-Fi
Module Software version in NIUX subfolder at the following website:
http://electrolux.opensoftwarerepository.com
.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement