Electrolux EWP126100W User Manual

Add to my manuals
28 Pages

advertisement

Electrolux EWP126100W User Manual | Manualzz
EWP 86100 W
EWP 106100 W
EWP 126100 W
................................................ .............................................
EN WASHING MACHINE
USER MANUAL
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information
Frost precaution
Environment concerns
Product description
Technical data
Installation
Special accessories
2
4
4
5
5
6
10
First use
Daily use
Washing programmes
Consumption values
Care and cleaning
What to do if…
10
10
18
21
21
24
Subject to change without notice.
SAFETY INFORMATION
Important! Read carefully and keep for
future reference.
• The safety of your appliance complies
with the industry standards and with legal
requirements on the safety of appliances.
However, as manufacturers, we feel it is
our duty to provide the following safety
notes.
• It is most important that this instruction
book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another
owner, or should you move house and
leave the appliance, always ensure that
the book is supplied with the appliance in
order that the new owner can get to
know the functioning of the appliance
and the relevant warnings.
• You MUST read them carefully before installing or using the appliance.
• Before first starting up, check the appliance for any damage incurred during
transport. Never connect up a damaged
appliance . If parts are damaged, contact
your supplier.
• If the appliance is delivered in the winter
months when there are minus temperatures. Store it at room temperature for 24
hours before using for the first time.
• This appliance is made for use in a normal domestic situation. The manufacturer
is not responsible for freezing damages.
Read "Frost precaution".
GENERAL SAFETY
• It is dangerous to alter the specifications
or attempt to modify this product in any
way.
• During high temperature wash programmes the door glass may get hot. Do
not touch it!
• Make sure that small children and pets
do not climb into the drum. To avoid this,
please check inside the drum before using.
• Any objects such as coins, safety pins,
nails, screws, stones or any other hard,
sharp material can cause extensive damage and must not be placed into the appliance.
• Only use the advised quantities of fabric
softener and detergent. Damage to the
fabric can ensue if you over-fill. Refer to
the manufacturer’s recommendations of
quantities.
• Wash small items such as socks, laces,
washable belts etc in a washing bag or
pillow case as it is possible for such
items to slip down between the tub and
the inner drum.
• Do not use your appliance to wash articles with whalebones, material without
hems or torn material.
• Always unplug the appliance and turn off
the water supply after use, cleaning and
maintenance.
• Under no circumstances should you attempt to repair the appliance yourself.
Repairs carried out by inexperienced
people may cause injury or serious malfunctioning. Contact your local Service
electrolux 3
Centre. Always insist on genuine spare
parts.
INSTALLATION
• This appliance is heavy. Care should be
taken when moving it.
• All packing and transit bolts must be removed before use. Serious damage can
occur to the product and to property if
this is not adhered to. See relevant section in the user manual.
• This appliance is free standing only. DO
NOT build it in under a counter and DO
NOT remove the worktop for any reason.
• After having installed the appliance,
check that it is not standing on the inlet
and drain hose and the worktop is not
pressing the electrical supply cable
against the wall.
• Install the appliance on a flat hard floor.
• Never place cardboard, wood or similar
materials under the appliance to compensate for any unevenness in the floor.
• If the appliance is situated on a carpeted
floor, please adjust the feet in order to allow air to circulate freely under the appliance.
• Check that the appliance does not touch
the wall or other kitchen units.
• This appliance must be connected to
a cold water supply.
• Do not use the hose from your previous
appliance to connect to water supply. Always use the hose supplied with the appliance.
• The inlet hose must not be lengthened. If
it is too short and you do not wish to
move the tap, you will have to purchase a
new, longer hose specially designed for
this type of use.
• Always be sure, that there is no water
leakage from hoses and their connections after the installation.
• If the appliance is installed in a location
subject to frost, please read the “Frost
precaution” chapter. Manufacturer decline any responsibility for freezing damages.
• Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
• Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
USE
• This appliance is designed for domestic
use. It must not be used for purposes
other than those for which it was designed.
• Only wash fabrics which are designed to
be machine washed. Follow the instructions on each garment label.
• Do not overload the appliance. See the
"Washing Programme Chart".
• Before washing, ensure that all pockets
are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink,
rust, and grass before washing. Underwired bras must NOT be machine washed.
• The detergent dispenser drawer is provided with an insert for liquid detergent. Do
not use the insert downwards for gelatinous detergents, with programmes including prewash, with the delay start option. In all these cases you can use metering balls or sachets provided with the
detergent, Take out the metering aid at
the end of the washing cycle.
• Garments which have been in contact
with volatile petroleum products should
not be machine washed. If volatile cleaning fluids are used, care should be taken
to ensure that the fluid is removed from
the garment before placing in the appliance.
• Never pull the power supply cable to remove the plug from the socket; always
take hold of the plug itself.
• Never use the appliance if the power
supply cable, the control panel, the working surface or the base are damaged so
that the inside of the appliance is accessible.
CHILD SAFETY
• This appliance is not intended for use by
persons (including children) with reduced
physical sensory or mental capabilities or
lack of experience and knowledge unless
they have been given supervision or in-
4 electrolux
•
•
•
•
struction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
The packaging components (e.g. plastic
film, polystyrene) can be dangerous to
children - danger of suffocation! Keep
them out of children’s reach.
Keep all detergents in a safe place out of
children’s reach.
Make sure that children or pets do not
climb inside the drum. To prevent children and pets becoming trapped inside
the drum this appliance incorporates a
special feature. To activate this device,
rotate the button (without pressing it) in-
side the door clockwise until the groove
is horizontal. If necessary use a coin.
To disable this device and restore the
possibility of closing the door, rotate the
button anti-clockwise until the groove is
vertical.
FROST PRECAUTION
If the appliance is installed in a place where
the temperature could drop below 0°C,
proceed as follows to remove any water remaining inside the appliance:
1. unplug the appliance;
2. turn off the water tap;
3. unscrew the water inlet hose from the
tap;
4. unfasten the drain hose from the rear
support and unhook it from sink or spigot;
5. place a bowl on the floor;
6. let the drain hose run along the floor,
place the external extremities of the
drain and inlet hoses in the bowl placed
on the floor and let water drain out
completely;
7. screw the water inlet hose back on and
reposition drain hose again;
When you intend to start the appliance up
again, make sure that the room temperature is above 0°C.
ENVIRONMENT CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
PACKAGING MATERIALS
The materials marked with the symbol
are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
electrolux 5
This means that they can be recycled by
disposing of them properly in appropriate
collection containers.
ECOLOGICAL HINTS
To save water, energy and to help protect
the environment, we recommend that you
follow these tips:
• Normally soiled laundry may be washed
without prewashing in order to save detergent, water and time (the environment
is protected too!).
• The machine works more economically if
it is fully loaded.
• With adequate pre-treatment, stains and
limited soiling can be removed; the laundry can then be washed at a lower temperature.
• Measure out detergent according to the
water hardness, the degree of soiling and
the quantity of laundry being washed.
PRODUCT DESCRIPTION
1
2
7
3
8
4
9
5
10
11
6
1
2
3
4
5
6
Detergent dispenser drawer
Worktop
Control panel
Door opening handle
Rating plate (on the inner edge)
Front adjustable feet
12
7
8
9
10
11
12
Water drain hose
Drain hose support
Hose holders
Water inlet hose
Mains cable
Back feet
TECHNICAL DATA
Dimensions
Width / Height / Depth
600 / 850 / 540 mm
Electrical connection
Voltage
Overall power
Fuse
Frequency
230 V
2100 W
10 A
50 Hz
Water supply pressure
Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Level of protection against ingress of solid particles and moisture
Water supply
1)
Maximum Load
IPX4
Cold water
Cotton
6 kg
6 electrolux
Spin Speed
Maximum
800 rpm (EWP86100W)
1000 rpm (EWP106100W)
1200 rpm (EWP126100W)
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
INSTALLATION
UNPACKING
Warning!
• Read carefully the "Safety information" chapter before installing the appliance.
sure that no hoses are crushed in the
process.
Warning! Remove and keep all
transit devices so that they can be
refitted if the appliance ever has to be
transported again.
x3
A
C
B
• Remove the polystyrene base from the
bottom.
x3
x1
1
x2
Necessary tools 1)
10 mm
30 mm
2
• Return appliance to the upright position.
• Remove the external film. Use a cutter, if
necessary.
• Remove the cardboard top.
• Remove the polystyrene packaging materials.
• Spread the front piece on the floor behind the appliance and then lay the appliance carefully rear side down on it. Make
1) These tools are not provided with the appliance.
• Open the door and remove the plastic
hose guide, the bag containing the instruction booklet and the plastic plug
caps from the drum.
electrolux 7
• Remove the power supply cable and the
draining and inlet hose from the hose
holders on the rear of the appliance.
• Plug the smaller upper hole and the two
large ones with the corresponding plastic
plug caps.
• Unscrew the three bolts and remove the
hose holders.
• Slide out the relevant plastic spacers.
POSITIONING AND LEVELLING
Level the appliance by raising or lowering
the feet. Depending on the model, the appliance can have four adjustable feet, or
two front-adjustable feet and two back
fixed feet.
The appliance MUST be level and stable on
a flat hard floor. If necessary, check the setting with a spirit level. Any necessary adjustment can be made with a spanner.
Warning! Do not remove the drain
hose from the rear support.
Remove this hose only if it is
necessary to drain the water. Refer
to "Frost precaution" and "What to
do if".
8 electrolux
45°
35°
• After positioning the inlet hose, be sure to
tighten the ring nut again to prevent
leaks.
Accurate levelling prevents vibration, noise
and displacement of the appliance during
operation.
Repeat the levelling action, if the appliance
is not level and stable.
WATER DRAINAGE
Form a hook at the end of the drain hose
using the plastic hose guide, if necessary.
The end of the drain hose can be positioned in four ways:
• Hooked over the edge of a sink using
the plastic hose guide.
WATER INLET
• Connect the hose to a tap with a 3/4”
thread.
• Loosen the ring nut to angle the hose to
the left or right depending on the position
of your water tap. Do not place the inlet hose downwards.
Tie the plastic hose guide to the tap with
a string to prevent that the drain hose unhooks when the appliance is emptying.
• Onto a sink outlet spigot.
electrolux 9
• Directly to a built-in drain pipe in the
room wall.
Push the drain hose onto the spigot and
secure with a clip, ensure a loop is
formed in the drain hose to prevent
waste from the sink entering the appliance.
If the outlet spigot has not been used before, remove any blanking plug that may
be in place.
• Directly into a drain pipe at a height
of not less than 60 cm and not more than
100 cm. The end of the drain hose must
always be ventilated, i.e. the inside diameter of the drain pipe must be larger
than the outside diameter of the drain
hose. The drain hose must not be kinked.
The drain hose may be extended to a
maximum of 4 metres. An additional
drain hose and joining piece is available
from your Local Centre.
CONNECTIONS OVERVIEW
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
max.
100 cm
min. 60 cm
max. 100 cm
~max.400 cm
min.
60 cm
10 electrolux
ELECTRICAL CONNECTION
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agree with your domestic power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-way plugs, connectors
and extension cables. There is a risk of
fire.
• Do not replace or modify the mains cable
yourself. Contact the After Sales Service.
• Make sure that the mains plug and cable
is not squashed or damaged by the back
of the appliance.
• Make sure that the mains plug is accessible after installation.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.
• This appliance complies with the E.E.C.
Directives.
SPECIAL ACCESSORIES
RUBBER FEET KIT (4055126249)
Available from your authorized dealer.
The rubber feet are particularly recommended on floating, slippery and wooden floors.
Mount the rubber feet to prevent vibration,
noises and displacement of the appliance
during operation.
Read carefully the instructions supplied with
the kit.
FIRST USE
• Ensure that the electrical and water
connections comply with the installation instructions.
• Ensure that the drum is empty.
• Before the first wash, run a cotton
cycle at the highest temperature
without any laundry in the machine,
to remove any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the main
wash compartment and start the
machine.
DAILY USE
SORT OUT THE LAUNDRY
Follow the wash code symbols on each
garment label and the manufacturer’s
washing instructions. Sort the laundry as
follows: whites, coloureds, synthetics, delicates, woollens.
BEFORE LOADING THE LAUNDRY
Important! Make sure that no metal
objects are left in the laundry (e.g. hair clips,
safety pins, pins). Button up pillowcases,
close zip fasteners, hooks and poppers. Tie
any belts or long tapes. Remove any hooks
(e.g curtains).
• Never wash whites and coloureds together. Whites may lose their «whiteness»
in the wash.
• New coloured items may run in the first
wash; they should therefore be washed
separately the first time.
• Rub particularly soiled areas with a special detergent or detergent paste.
• Treat curtains with special care.
• Wash the socks and the gloves inside the
bag or a net.
Remove stubborn stains before washing:
electrolux 11
Blood: treat fresh stains with cold water.
For dried stains, soak overnight in water
with a special detergent then rub in the
soap and water.
Oil based paint: moisten with benzine
stain remover, lay the garment on a soft
cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and
dab the stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since
the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone2), lay the garment on a soft cloth
and dab the stain.
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with
bleach.
Ink: depending on the type of ink, moisten
the fabric first with acetone2), then with
acetic acid; treat any residual marks on
white fabrics with bleach and then rinse
thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub with
detergent paste.
OPEN THE DOOR BY CAREFULLY
PULLING THE DOOR HANDLE
OUTWARDS
LOAD THE LAUNDRY
Place the laundry in the drum, one item at a
time, shaking them out as much as possible.
2) do not use acetone on artificial silk.
MAXIMUM LOADS
Recommended loads are indicated in the
«Washing Programmes».
General rules:
• Cotton, linen: drum full but not too
tightly packed;
• Synthetics: drum no more than half full;
• Delicate fabrics and woollens: drum
no more than one third full.
CLOSE THE DOOR GENTLY
Warning! Make sure that any fabrics
were not trapped when closing the
door.
DETERGENTS AND ADDITIVES
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the
environment.
Although biodegradable, detergents contain
substances which, in large quantities, can
upset the delicate balance of nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
12 electrolux
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washing machine
detergents may be used in this appliance:
• powder detergents for all types of fabric,
• powder detergents for delicate fabrics
(40°C max) and woollens,
• liquid detergents, preferably for low temperature wash programmes (60°C max)
for all types of fabric, or special for woollens only.
OPEN THE DETERGENT DISPENSER
DRAWER
Compartment for powder or liquid detergent used for main wash.
Compartment for liquid additives (fabric softener,
starch).
Warning! Depending on the type
detergent you use (powder of liquid),
ensure that the flap, placed in the main
wash compartment, is in the desired
position.
FLAP FOR POWDER OR LIQUID
DETERGENT
UP- Flap position if using POWDER detergent
PU
SH
DEGREES OF WATER HARDNESS
Water hardness is classified in so-called
“degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority.
If the water hardness degree is medium or
high we suggest you to add a water softener following always the manufacturer’s instructions.
When the degree of hardness is soft, readjust the quantity of the detergent.
Warning! If you wish to carry out the
prewash, pour the detergent among
washing items into the drum.
RE
TO MOV
CL E
EA
N
QUANTITY OF DETERGENT TO BE
USED
The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water
used.
For the quantity of detergent, refer always
to what is written on the product packing.
Use less detergent if:
• you are washing a small load,
• the laundry is lightly soiled,
• large amounts of foam form during washing.
DOWN - Flap position if using LIQUID
detergent during main wash
electrolux 13
PU
SH
RE
TO MOV
CL E
EA
N
• Measure out the detergent.
• Pour the powder detergent into the main
.
wash compartment
If the flap is not in the desired position:
The flap is up and you wish to use liquid detergent:
• Rotate the flap downwards.
• Carefully put the drawer back.
D
UID
LIQ
NT
R GE l
ETE 120m l
60m
• Measure out the detergent.
• Remove the drawer. Push the drawer
edge outwards where indicated by the
arrow (PUSH) to facilitate drawer removal.
The flap is down and you wish to use
powder detergent:
• Rotate the flap upwards. Ensure to fit the
flap completely in.
• Carefully put the drawer back.
DER
POW
ER
DET
T
GEN
For the quantity of detergent, refer always to what is written on the product
packing and ensure that the detergent
can be poured in the drawer.
• Pour the liquid detergent in the compartwithout exceeding the limit indiment
cated in the flap. The detergent must be
placed in the appropriate compartments
of the dispenser drawer before starting
the wash programme.
14 electrolux
MEASURE OUT THE FABRIC
SOFTENER
Pour fabric softener or any additives into
(do not exthe compartment marked
ceed the «MAX» mark in the drawer). Any
additives must be placed in the appropriate
compartments of the dispenser drawer just
before starting the wash programme.
Warning! Do not use the flap in
"DOWN" position with:
• Gelatinous detergent or thick detergent.
• Powder detergent.
• With programmes with prewash.
• Do not use liquid detergent if the
washing programme doesn't start
immediately.
In all above listed cases, use the flap in
"UP" position .
CLOSE THE DETERGENT DISPENSER
DRAWER
SET YOUR WASHING PROGRAMME
The control panel permits to select a washing programmes and different options.
When an option button is selected, the corresponding pilot light is on. Otherwise it is off.
For compatibility among washing programmes and options, see the "Washing Programme Chart". If an incorrect option is selected, the integrated red pilot light of the
button 6 flashes 3 times.
7
1
2
3
4
5
6
electrolux 15
1
Programme selector
dial
Turn the programme selector dial to the required
programme. The selector dial can be turned either
clockwise or counter-clockwise. The green pilot light
of the button 6 starts flashing: the appliance is now
switched on.
If you turn the programme selector dial to another
programme when the appliance is working, the red
pilot light of the button 6 will flash 3 times to indicate
a wrong selection. The appliance will not perform the
new selected programme.
• To switch the appliance off, turn the programme se.
lector dial to the position
• To cancel or change a running programme, switch
the appliance off by turning the programme selector
. Select the new programme by
dial to the position
turning the selector to the desired programme. Start
the new programme by pressing the button 6 again.
The water in the tub will be not emptied out.
2
Temperature button
Push the temperature button to select the most
suitable temperature for washing your laundry .
: Cold wash.
3
Spin reduction and
Rinse Hold
By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a different speed.
The relevant light illuminates.
Rinse Hold
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing. Before
opening the door it will be necessary to empty out the
water.
To empty out the water, please read the paragraph
«At the end of the programme».
4
Super Quick
By pressing this button the corresponding pilot light illuminates.
Short cycle for lightly soiled items or for laundry which
needs only freshening up.
With this option, a reduced load of laundry is recommended:
• Cottons 3 kg
• Synthetics and delicates 1,5 kg
16 electrolux
3
Extra Rinse
This appliance is designed for saving water. However, for
people with very delicate skin (allergic to detergents) it
may be necessary to rinse the laundry using an extra
quantity of water.
Press simultaneously the buttons 3 and 4 for some seconds: the pilot light 7.2 comes on. This function stays
permanently on. To remove it press the same buttons
again until the pilot light 7.2 goes off.
Delay Start
The start of the programme can be delayed by 3, 6 or 9
hours by means of this button. The relevant light illuminates.
You must select this option after you have set the programme and before you start the programme.
+
4
5
Select a delayed start:
• select the programme and the required options;
• select the delay start by pressing the button 5;
• press the button 6:
– the appliance starts its hourly countdown.
– The programme will start after the selected delay
has expired.
Cancelling the delayed start after having started
the programme:
• set the appliance to PAUSE by pressing the button 6;
• press the button 5 once, the light relevant to the selected delay goes off;
• press the button 6 again to start the programme.
The DELAY START cannot be selected with the drain
programme.
Important! The selected delay can be changed only after selecting the washing programme again. The door will be locked throughout the delay time. If you need to open
the door, you must set the appliance to PAUSE (by pressing the button 6) and then wait
a few minutes. After you have closed the door, press the button 6 again.
6
Start/Pause
Start the programme by pressing the button 6
• To start the selected programme, press the button 6,
the corresponding green pilot light stops flashing. The
pilot light 7.1 illuminates to indicate that the appliance
starts operating and the door is locked. If you have
chosen a delayed start, the appliance will begin the
countdown.
• To interrupt a programme which is running, press the
button 6: the corresponding green pilot light starts
flashing. It is possible to change some options of a
running programme before the programme carries
them out.
• To restart the programme from the point at which it
was interrupted, press the button 6.
electrolux 17
• After the programme has started the door is locked. If,
for any reason, you need to open the door, set firstly
the appliance to PAUSE by pressing the button 6. After a few minutes it will be possible to open the door.
If the door remains locked, this means that the appliance is already heating or that the water level is too
high. In any case, do not try to force the door!
If you cannot open the door but you need to open it
you have to switch the appliance off by turning the se. After a few minutes the door can be
lector dial to
opened (pay attention to the water level and temperature!). After closing the door, it is necessary to
select the programme and options again and to press
the button 6.
Indicator pilot lights
7.1
7.2
7.3
• When you start the programme by pressing the button
6, the washing phase pilot light (7.1) illuminates. This
means that the appliance is operating.
• The additional rinses pilot light (7.2) illuminates when
the appliance performs an extra rinse.
• When the programme has finished the end cycle pilot
light (7.3) comes on.
AT THE END OF THE PROGRAMME
The appliance stops automatically. The pilot
light of the button 6 and the pilot light corresponding to the just finished washing
phase go off. The light 7.3 illuminates.
If a programme or an option that ends with
water left in the tub has been selected and
the door remains locked to indicate that the
water must be emptied out before opening
the door.
Follow the below instructions to empty out
the water:
• Turn the programme selector dial to
.
• Select the draining or spinning programme.
• Reduce the spin speed if needed, by
pressing the relevant button.
• Press the button 6.
At the end of the programme, the door can
be now opened. Turn the programme seto switch the appliance off.
lector dial to
Remove the laundry from the drum and
carefully check that the drum is empty. If
you do not intend to carry out another
wash, close the water tap. Leave the door
open to prevent the formation of mildew
and unpleasant smells.
Warning! If there are children or pets
in the house, activate the child safe-
ty device in the inner side of the door
frame (for more details read " Child
safety" in the chapter "Safety Information").
Stand by: during programme setting
up and once the programme has finished, if the programme selector dial and
any button are not touched, after a few
minutes the energy saving system is
enabled. The pilot lights go off. The
green pilot light of the button 6 flashes
with a low frequency. By pressing any
button the appliance will come out of
the energy saving status.
DOOR SEAL
At the end of every cycle, check from the
door seal and remove objects that could be
trapped in the fold.
18 electrolux
WASHING PROGRAMMES
Programme - Maximum and Minimum Temperature
- Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry
Options
COTTON
(Cold)
95°Main wash - Rinses - Maximum spin speed: 800 rpm for
EWP86100W, 1000 rpm for EWP106100W, 1200 rpm
for EWP126100W
Max. load 6 kg - Reduced load 3 kg
White, coloured cotton and linen. Normally soiled
items.
SPIN REDUCTION,
RINSE HOLD,
SUPER QUICK1),
EXTRA RINSE,
DELAY START
+
COTTON WITH PREWASH
(Cold)
95° Prewash - Main wash - Rinses - Maximum spin speed:
800 rpm for EWP86100W, 1000 rpm for EWP106100W,
1200 rpm for EWP126100W
Max. load 6 kg - Reduced load 3 kg
White, coloured cotton and linen. Heavy soiled items.
SPIN REDUCTION,
RINSE HOLD,
SUPER QUICK1),
EXTRA RINSE,
DELAY START
COTTON ECONOMY2)
60° - 40°
Main wash - Rinses - Maximum spin speed: 800 rpm for
EWP86100W, 1000 rpm for EWP106100W, 1200 rpm
for EWP126100W
Max. load 6 kg
White and coloured cotton. This programme can be
selected for slightly or normally soiled cotton items. The
temperature will decrease and the washing time will be
extended. This allows to obtain a good washing efficiency by saving energy.
SPIN REDUCTION,
RINSE HOLD,
EXTRA RINSE,
DELAY START
SYNTHETIC
60° (Cold)
Main wash - Rinses - Maximum spin speed: 800 rpm
EWP86100W, 1000 rpm for EWP106100W, 1200 rpm
EWP126100W
Max. load 3 kg - Reduced load 1,5 kg
Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses . Normally soiled items.
SPIN REDUCTION,
RINSE HOLD,
SUPER QUICK1),
EXTRA RINSE,
DELAY START
Detergent
Compartment
electrolux 19
Programme - Maximum and Minimum Temperature
- Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry
Options
MIXED FABRICS
Cold
Main wash - Rinses - Maximum spin speed: 800 rpm
EWP86100W, 1000 rpm for EWP106100W, 1200 rpm
EWP126100W
Max. load 3 kg
Highly energy efficient cold wash programme for lightly
soiled laundry. This programme requires a detergent
which is active in cold water.
SPIN REDUCTION,
RINSE HOLD,
EXTRA RINSE,
DELAY START
DELICATES
40°(Cold)
Main wash - Rinses - Maximum spin speed: 700 rpm
Max. load kg 3 - Reduced load 1,5 kg1)
Delicate fabrics: acrylics, viscose, polyester . Normally
soiled items.
RINSE HOLD,
SUPER QUICK1),
EXTRA RINSE,
DELAY START
WOOL/ HANDWASH
40°(Cold)
Main wash - Rinses - Maximum spin speed: 800 rpm for
EWP86100W, 1000 rpm for EWP106100W, 1200 rpm
for EWP126100W
Max. load 2 kg
Machine washable wool, hand washable woollens
and delicate fabrics with «hand washing» care symbol. Note: A single or bulky item may cause imbalance.
If the appliance doesn’t perform the final spin phase, add
more items, redistribute the load manually and then select the spinning programme.
RINSE
Rinse - Short spin speed 700 rpm. If a spin speed higher
than 700 rpm is selected, by pressing the relevant button, the appliance performs a long spin. (Maximum spin
speed: 800 rpm for EWP86100W, 1000 rpm for
EWP106100W, 1200 rpm for EWP126100W)
Max. load 6 kg
To rinse and spin cotton garments which have been
washed by hand. Select the EXTRA RINSE option to intensify the rinsing action. The appliance adds additional
rinses.
DRAIN
Draining of water
For emptying out the water left in the drum.
SPIN REDUCTION,
RINSE HOLD,
DELAY START
SPIN REDUCTION,
RINSE HOLD,
EXTRA RINSE,
DELAY START
Detergent
Compartment
20 electrolux
Programme - Maximum and Minimum Temperature
- Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry
SPIN
Drain and long spin at maximum spin speed: 800 rpm for
EWP86100W, 1000 rpm for EWP106100W, 1200 rpm
for EWP126100W
Max. load 6 kg
Separate spin for hand washed garments and after programmes with the No Spin option selected. You can
choose the spin speed by pressing the relevant button to
adapt it to the fabrics to be spun.
If a spin speed at 700 rpm or lower is selected, by pressing the relevant button, the appliance performs a short
spin.
Options
Detergent
Compartment
SPIN REDUCTION,
DELAY START
Special programmes
EASY IRON
40°(Cold)
Main wash - Rinses - Maximum spin speed: 800 rpm for
EWP86100W, 700 rpm for EWP106100W and
EWP126100W
In order to obtain the best anti-creasing result, reduce
the load of synthetic items. (Recommended load 1 kg)
Synthetic or mixed fabrics. Gentle wash and spin to
avoid any creasing. The appliance performs additional
rinses.
SPIN REDUCTION3),
RINSE HOLD,
EXTRA RINSE,
DELAY START
5 SHIRTS
30°
Main wash - Rinses - Maximum spin speed: 800 rpm for
EWP86100W, 700 rpm for EWP106100W and
EWP126100W
Synthetics and mixed fabrics. Suitable for 5 - 6 shirts
lightly soiled.
SPIN REDUCTION3),
DELAY START
MINI 30
30°
Main wash - Rinses - Maximum spin speed 700 rpm
Max. load 3 kg
Synthetics and delicates. Lightly soiled items or which
only needs freshening up.
JEANS
(Cold)
60°Main wash - Rinses - Maximum spin speed: 800 rpm for
EWP86100W, 1000 rpm for EWP106100W, 1200 rpm
for EWP126100W
Max. load 3 kg
Trousers, shirts or jackets in denim and jersey realized
with hi-tech materials. The Extra Rinse option is activated
automatically.
DELAY START
SPIN REDUCTION,
RINSE HOLD,
DELAY START
1) If you select the SUPER QUICK option by pressing button 4, we recommend that you reduce the maximum load
as indicated. Full loading is possible however with somewhat reduced cleaning results.
2) Standard programmes for the Energy Label consumption values
According to regulation 1061/2010, the “COTTON ECONOMY 60 °C” and “COTTON ECONOMY 40 °C” are
respectively the “standard 60 °C cotton programme” and the “standard 40 °C cotton programme”. They are the
most efficient programmes in terms of combined energy and water consumptions for washing normally soiled
cotton laundry.
electrolux 21
The water temperature of the washing phase may differ from the temperature declared for the selected programme.
3) Available with EWP86100W only.
CONSUMPTION VALUES
Energy consumption
(kWh)
Water consumption
(litre)
Approximate programme
duration (minutes)
Remaining moisture (%)1)
EWP86100W
Remaining moisture (%)1)
EWP106100W
Remaining moisture (%)1)
EWP126100W
Cottons 60
°C
6
1.2
72
170
66
60
53
Cottons 40
°C
6
0.75
72
145
66
60
53
Synthetics
40 °C
3
0.6
57
95
37
37
35
Delicates 40
°C
3
0.6
65
75
37
37
35
Wool/Hand
wash 30 °C
2
0.3
48
55
37
32
30
Programmes
Load
(kg)
The data of this table are approximate. Different causes can change the data: the
quantity and type of laundry, the water and ambient temperature.
Standard cotton programmes
Standard 60
°C cotton
6
1.07
54
194
66
60
53
Standard 60
°C cotton
3
0.79
43
172
66
60
53
Standard 40
°C cotton
3
0.61
43
167
66
60
53
1) At the end of spin phase.
Off Mode (W)
Left On Mode (W)
0.65
0.65
CARE AND CLEANING
Warning! Switch the appliance off and
remove the mains plug from the socket
before any cleaning action.
MAINTENANCE WASH
With the use of low temperature washes it
is possible to get a build up of residues inside the drum.
We recommend that a maintenance wash
be performed on a regular basis.
To run a maintenance wash:
22 electrolux
• The drum should be empty of laundry.
• Select the hottest cotton wash programme.
• Use a normal measure of detergent,
must be a powder with biological properties.
CLEANING THE DISPENSER DRAWER
The washing powder and additive dispenser drawer should be cleaned regularly.
• Remove the drawer.
• Use the previous brush to clean the recess, ensuring that upper and lower part
of it is well cleaned.
After having cleaned the dispenser and the
drawer recess, replace it.
• To aid cleaning, the top part of the additive compartment should be removed.
CLEANING THE DRAIN FILTER
The filter permits to hold fluff or foreign bodies left unawares in the laundry.
The pump must be cleaned regularly.
To clean the filter, proceed as follows:
• Tturn programme selector dial to position
.
• Unplug the appliance.;
• Open the door.
• Turn the drum and align the filter cover
(FILTER) with the arrow on the door
seal.;
• Use a stiff brush to clean and remove all
washing powder residue.
• Clean all the removed parts of the dispenser drawer under a tap to remove any
traces of accumulated powder.
• Open the filter cover by pressing the special hook and by rotating the cover upwards.;
electrolux 23
Warning! Keep the filter cover open
until the filter removal.
• Before removing the filter, remove any
fluff or small objects from around the filter.
• If necessary, place the filter cover in the
right position again.
• Open the filter cover and insert the filter
again.
• Remove the filter and clean it under the
tap.
• The filter is inserted correctly when
the indicator on its top is visible and
blocked.
24 electrolux
available) shows the relevant alarm (see
chapter "What to do if..." for more details),
check if the water inlet filters are blocked .
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose from the tap.
• Clean the filter in the hose with a stiff
brush.
• Close the filter cover.
• Insert the mains plug again.
• Screw the hose back onto the tap. Make
sure the connection is tight.
• Unscrew the hose from the appliance.
Keep a towel nearby because some water may flow.
• Clean the filter in the valve with a stiff
brush or with the piece of cloth.
CLEANING THE WATER INLET
FILTERS
Important! If the appliance doesn't fill, it
takes a long time to fill with water, the
starting button flashes red or the display (if
• Screw the hose back to the appliance
and make sure the connection is tight.
• Turn on the water tap.
WHAT TO DO IF…
The appliance does not start or stops during operation. Certain problems are due to
lack of simple maintenance or oversights,
which can be solved with the help of the indications described in the charts, without
calling out an engineer.
During appliance operation it is possible
that the red pilot light of the button 6 flashFault code and malfunction
es and one of the indicator pilot lights illuminates to indicate that the appliance is not
working.
Before contacting your local Service Centre, please carry out the checks listed below.
Possible cause - Solution
electrolux 25
The light of button 6 flashes and the light 7.1 illuminates: Problem with the water
supply
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked
• Clean the water inlet filters (read "Cleaning the water inlet filters" for more details).
The light of button 6 flashes and the light 7.2 illuminates: Problem with the water
drainage
The drain hose is squashed or kinked.
• Check the drain hose connection.
The drain filter is clogged
• If the appliance stops working without discharging the water ,
first carry out an emergency drain:
– Turn the programme selector dial to
;
– Unplug the appliance;
– Close the water tap;
– If necessary, wait until the water has cooled down;
– Unscrew the drain hose from the rear support (see "Frost
precaution") and unhook it from the sink or spigot;
– Let it run along the floor;
– Place a bowl on the floor and place the end of the draining
hose into the bowl. The water should drain by gravity into
the bowl. When the bowl is full, empty it. Repeat the procedure until water stops flowing out ;
– Screw the draining hose to the rear support and reposition
it;
– Open the door and remove the laundry;
– Carry out the drain filter cleaning as described in "Cleaning
the drain filter";
– At the end of cleaning action, close the door and insert the
mains plug again;
– Run a drain programme to check if the appliance works
now.
The light of button 6 flashes and the light 7.3 illuminates: Door open
The door has not been closed or is not closed properly.
• Close firmly the door.
The appliance does not start or stops during operation without any visible alarm.
Before contacting your local Service Centre, please carry out the checks listed below.
26 electrolux
Malfunction
The appliance does
not start:
The appliance fills
then empties immediately:
Possible cause / Solution
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The programme selector dial is not correctly positioned and the button 6
has not been pressed.
• Please turn the selector dial and press the button 6 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The end of the drain hose is too low.
• Refer to paragraph in "Water drainage" in chapter "Installation".
The appliance does
not empty and/or does
not spin:
An option or a programme that ends with the water still in the tub or a
that eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
There is water on the
floor:
Too much detergent or unsuitable detergent (creates too much foam)
has been used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It
is not always easy to see this as the water runs down the hose; check
to see if it is damp.
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Replace it with a new one.
The door will not
open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the door lock is released.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The appliance vibrates
noisily:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The appliance is not levelled correctly.
• Adjust the feet.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Spinning starts late or
the appliance does not
spin:
The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen several times before the
unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the appliance will not spin. In this case, redistribute the load manually and select
the spin programme.
• Load more laundry.
The load is too small.
• Add more items, redistribute the load manually and then select the
spinning programme.
No water is visible in
the drum:
Appliances based on modern technology operate very economically using very little water without affecting performance.
electrolux 27
Malfunction
Possible cause / Solution
Unsatisfactory washing results
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The appliance makes
an unusual noise
The appliance is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures a
softer start and more even distribution of the laundry in the drum when
spinning, as well as increased stability of the appliance.
After completing these checks, switch on
the appliance and press the button 6 to restart the programme.
If the malfunction shows again, contact
your Service Centre.
The necessary data for the service centre is
on the rating plate. We recommend that
you write the data here:
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
Model description ...............................
(MOD.)
Product number
(PNC)
...............................
Serial number
(S.N.)
...............................
www.electrolux.com/shop
192988041-C-152012

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Questions and Answers

What safety precautions should be taken when using the appliance?
Ensure it's properly installed, grounded, and not overloaded. Keep children and pets away during operation. Avoid washing items with whalebones, unhemmed materials, or torn fabrics. Always unplug the appliance and turn off the water supply after use.
How do I prevent freezing damage to the appliance?
If installed in a location prone to frost, remove any remaining water inside the appliance during freezing temperatures by following the steps outlined in the manual.
How can I save water and energy while using the appliance?
Avoid prewashing lightly soiled laundry, fully load the machine, use adequate detergent based on water hardness and soil level, and pretreat stains for effective cleaning at lower temperatures.
What is the purpose of the insert in the detergent dispenser drawer?
The insert is designed for liquid detergent. Avoid using it downwards for gelatinous detergents, prewash programs, or with the delay start option. Use metering balls or sachets provided with the detergent instead.
How do I activate the child safety feature?
Rotate the button inside the door clockwise until the groove is horizontal. Use a coin if necessary. To disable the feature, rotate the button counterclockwise until the groove is vertical.

Related manuals

Download PDF

advertisement