AEG | SCT71900S0 | User manual | Aeg SCT71900S0 User Manual

SCT71900S0
EN User manual
2
www.aeg.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
WHAT TO DO IF… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
NOISES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
ENVIRONMENT CONCERNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading to get
the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.aeg.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
In the interest of your safety and to ensure the correct use, before installing
and first using the appliance, read this
user manual carefully, including its hints
and warnings. To avoid unnecessary mistakes and accidents, it is important to
ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these
instructions and make sure that they remain with the appliance if it is moved or
sold, so that everyone using it through
its life will be properly informed on appliance use and safety.
For the safety of life and property keep
the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission.
1.1 Children and vulnerable
people safety
• This appliance is not intended for use
by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging well away from
children. There is risk of suffocation.
• If you are discarding the appliance
pull the plug out of the socket, cut the
connection cable (as close to the appliance as you can) and remove the
door to prevent playing children to
suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic
door seals is to replace an older appliance having a spring lock (latch) on
the door or lid, be sure to make that
spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for
a child.
1.2 General safety
WARNING!
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• The appliance is intended for keeping
foodstuff and/or beverages in a normal household as explained in this instruction booklet.
• Do not use a mechanical device or any
artificial means to speed up the thawing process.
• Do not use other electrical appliances
(such as ice cream makers) inside of
refrigerating appliances, unless they
are approved for this purpose by the
manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is
contained within the refrigerant circuit
of the appliance, a natural gas with a
high level of environmental compatibility, which is nevertheless flammable.
During transportation and installation
of the appliance, be certain that none
of the components of the refrigerant
circuit become damaged.
If the refrigerant circuit should become damaged:
– avoid open flames and sources of
ignition
– thoroughly ventilate the room in
which the appliance is situated
• It is dangerous to alter the specifications or modify this product in any
way. Any damage to the cord may
cause a short-circuit, fire and/or electric shock.
WARNING!
Any electrical component (power
cord, plug, compressor) must be
replaced by a certified service
agent or qualified service personnel to avoid hazard.
1.
Power cord must not be lengthened.
4
www.aeg.com
2.
•
•
•
•
Make sure that the power plug is
not squashed or damaged by the
back of the appliance. A squashed
or damaged power plug may
overheat and cause a fire.
3. Make sure that you can come to
the mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose,
do not insert the power plug.
There is a risk of electric shock or
fire.
6. You must not operate the appliance without the lamp cover (if
foreseen) of interior lighting.
This appliance is heavy. Care should
be taken when moving it.
Do not remove nor touch items from
the freezer compartment if your hands
are damp/wet, as this could cause skin
abrasions or frost/freezer burns.
Avoid prolonged exposure of the appliance to direct sunlight.
Bulb lamps (if foreseen) used in this
appliance are special purpose lamps
selected for household appliances use
only. They are not suitable for household room illumination.
1.3 Daily Use
• Do not put hot pot on the plastic parts
in the appliance.
• Do not store flammable gas and liquid
in the appliance, because they may
explode.
• Do not place food products directly
against the air outlet on the rear wall.
(If the appliance is Frost Free)
• Frozen food must not be re-frozen
once it has been thawed out.
• Store pre-packed frozen food in accordance with the frozen food manufacturer's instructions.
• Appliance's manufacturers storage
recommendations should be strictly
adhered to. Refer to relevant instructions.
• Do not place carbonated or fizzy
drinks in the freezer compartment as it
creates pressure on the container,
which may cause it to explode, resulting in damage to the appliance.
• Ice lollies can cause frost burns if consumed straight from the appliance.
1.4 Care and cleaning
• Before maintenance, switch off the appliance and disconnect the mains plug
from the mains socket.
• Do not clean the appliance with metal
objects.
• Do not use sharp objects to remove
frost from the appliance. Use a plastic
scraper.
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is
blocked, water will collect in the bottom of the appliance.
1.5 Installation
For electrical connection carefully follow the instructions given in
specific paragraphs.
• Unpack the appliance and check if
there are damages on it. Do not connect the appliance if it is damaged.
Report possible damages immediately
to the place you bought it. In that case
retain packing.
• It is advisable to wait at least four
hours before connecting the appliance to allow the oil to flow back in
the compressor.
• Adequate air circulation should be
around the appliance, lacking this
leads to overheating. To achieve sufficient ventilation follow the instructions
relevant to installation.
• Wherever possible the back of the
product should be against a wall to
avoid touching or catching warm parts
(compressor, condenser) to prevent
possible burn.
• The appliance must not be located
close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.
• Connect to potable water supply only
(If a water connection is foreseen).
ENGLISH
5
ant circuit or insulation materials.
The appliance shall not be discarded together with the urban
refuse and rubbish. The insulation foam contains flammable
gases: the appliance shall be disposed according to the applicable regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, especially at the rear near the heat exchanger. The materials used on
this appliance marked by the
are recyclable.
symbol
1.6 Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.
1.7 Environment Protection
This appliance does not contain
gasses which could damage the
ozone layer, in either its refriger-
2. CONTROL PANEL
1 2
3
4
5
6 7
8 9
10
11
12 13 14 15 16
1 Fridge Pilot light
2.1 Switching on
2 Fridge ON/OFF switch
1.
3 Fridge temperature regulator, + but-
ton
4 Fridge temperature indicator
5 Fridge temperature regulator, - but-
ton
2.
3.
4.
6 DYNAMICAIR indicator
7 DYNAMICAIR button
5.
8 Appliance Pilot light
9 Appliance ON/OFF switch
10 Freezer temperature regulator, +
button
11 Freezer temperature indicator
12 Freezer temperature regulator, button
13 FROSTMATIC indicator
14 FROSTMATIC button
15 Alarm indicator
16 Alarm reset button
Insert the plug into the mains socket.
Press ON/OFF switch .
The Pilot Light will light up.
The alarm indicator light flashes
since the temperature is reached.
The acoustic alarm sounds.
Press the alarm reset button to reset
the alarm.
2.2 Switching off the fridge
Keep ON/OFF switch pressed for
more than 5 seconds.
2. A countdown on the temperature indicator, from -3 -2 -1 will be shown.
When “1” appears the fridge is
turned off. The temperature indicator switches off. The Pilot light
switches off.
1.
6
www.aeg.com
2.3 Switching off the
appliance
1.
Keep ON/OFF switch pressed for
more than 5 seconds.
2. A countdown on the temperature indicators, from -3 -2 -1 will be shown.
When “1” appears the appliance is
turned off. The temperature indicators switch off. The Pilot lights switch
off.
2.4 High temperature alarm
In the event of an abnormal temperature
rise inside the freezer (e.g. power cut)
alarm indicator light will start to flash
and a buzzer will sound.
Push the alarm reset button to stop the
buzzer sound, while the alarm indicator
light will continue to flash.
The buzzer will stop automatically when
the temperature has returned to normal
while the alarm indicator light will continue to flash.
Press the alarm reset button. The alarm
indicator light goes out and at the same
time the freezer temperature indicator
show for about 5 seconds the warmest
temperature reached in the freezer compartment.
2.5 Temperature setting
buttons
The temperature is adjusted using the
temperature setting buttons. These buttons are connected to the temperature
indicator.
• Each time one of the two buttons is
pressed again the temperature is adjusted by 1°C. The set temperature
will be reached within 24 hours.
2.6 Temperature indicators
The temperature indicators show several
information:
• During normal operation, the temperature currently set for fridge and freezer are displayed.
• When the temperature is being adjusted a flashing display indicates the
fridge/freezer temperature currently
set.
2.7 Temperature regulation
To operate the appliance, proceed as
follows:
1. Set the required temperature by
pressing the corresponding temperature regulator. The temperature indicator will immediately show the
changed setting and the temperature indicator flashes.
2. Each time the temperature regulator
is pressed the temperature is adjusted by 1 °C. The set temperature will
be reached within 24 hours.
3. The temperature indicator will
change from flashing to continuous
illumination.
For a correct storage of the food the following temperatures should be set:
• +5 °C in the fridge
• -18 °C in the freezer.
When the setting is changed, the
compressor does not start immediately if automatic defrosting is
currently taking place. As the
storage temperature within the
fridge is reached quickly you can
store food immediately after
switching on.
2.8 DYNAMICAIR function
To switch on the function:
1. Press the DYNAMICAIR button.
2. The DYNAMICAIR indicator is
shown.
To switch off the function:
1. Press the DYNAMICAIR button.
2. The DYNAMICAIR indicator goes
off.
If the function is activated automatically the DYNAMICAIR indicator is not shown (refer to "Daily
use").
The activation of the DYNAMICAIR function increases the energy consumption.
2.9 COOLMATIC function
The COOLMATIC function is suitable for
quick cooling of large quantities of
goods in the refrigerator.
To activate the function, do these steps:
ENGLISH
1.
Press the Fridge Temperature - button (several times if necessary) until
the word “SC” appears in the display.
A temperature of +2°C is automatically selected.
To deactivate the function, do these
steps:
1. Press the Fridge Temperature + button .
The COOLMATIC function stops
automatically after about 6 hours.
If the COOLMATIC function is switched
on the temperature setting may not be
changed.
2.10 Holiday function
This function allows you to keep the refrigerator shut and empty during a long
holiday period (e.g. the summer holidays) without the formation of a bad
smell.
The fridge compartment must be
empty when the holiday function
is on.
To activate the function:
7
1.
press continuously the temperature
regulator (+ button) until the letter
"H" (Holiday) appears on the temperature indicator. The Holiday function sets the temperature approx
+15°C. The refrigerator is in the energy-saving mode.
To deactivate the function:
1. set the required temperature by
pressing the fridge temperature regulator.
2.11 FROSTMATIC function
The FROSTMATIC function accelerates
the freezing of fresh food and, at the
same time, protects foodstuffs already
stored from undesirable warming.
To activate the function, do these steps:
1. Press the FROSTMATIC button.
2. The FROSTMATIC indicator switches
on.
The FROSTMATIC function is ended automatically after a period of 52 hours.
You can deactivate the function at any
time:
1. Press the FROSTMATIC button.
2. The FROSTMATIC indicator switches
off.
3. DAILY USE
3.1 Before first use
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.
3.2 Freezing fresh food
The freezer compartment is suitable for
freezing fresh food and storing frozen
and deep-frozen food for a long time.
To freeze fresh food activate the FROSTMATIC function at least 24 hours before
placing the food to be frozen in the
freezer compartment.
Place the fresh food to be frozen in the
upper compartment.
The maximum amount of food that can
be frozen in 24 hours is specified on the
rating plate, a label located on the inside of the appliance.
The freezing process lasts 24 hours: during this period do not add other food to
be frozen.
3.3 Storage of frozen food
When first starting-up or after a period
out of use, before putting the products
in the compartment let the appliance run
at least 2 hours on the higher settings.
If large quantities of food are to be stored, remove all drawers and baskets from
appliance and place food on cooling
shelves to obtain the best performance.
8
www.aeg.com
WARNING!
Make sure that foods do not exceed the load limit stated on the
side of the upper section (where
applicable)
In the event of accidental defrosting, for example due to a
power failure, if the power has
been off for longer that the value
shown in the technical characteristics chart under "rising time",
the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after
cooling).
3.4 Thawing
Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available
for this operation.
Small pieces may even be cooked still
frozen, directly from the freezer: in this
case, cooking will take longer.
3.5 Ice-cube production
This appliance is equipped with one or
more trays for the production of icecubes. Fill these trays with water, then
put them in the freezer compartment.
Do not use metallic instruments
to remove the trays from the
freezer.
3.6 Cold accumulators
One or more cold accumulators are supplied in the freezer; these increase the
length of time for which food will keep in
the event of a power failure or breakdown.
3.7 Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the
shelves can be positioned as desired.
For better use of space, the front halfshelves can lie over the rear ones.
3.8 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
ENGLISH
9
3.9 Positioning the sliding box
The sliding box can be placed at different heights.
Do make these adjustments proceed as
follow:
1. lift the shelf with the sliding box upwards and out of the holders in the
door
2. remove the retaining bracket out of
the guide under the shelf
3. Reverse the above operation to insert the sliding box at a different
height.
3.10 MAXIBOX drawer
The drawer is suitable for storing fruit
and vegetables.
There is a separator inside the drawer
that can be placed in different positions
to allow for the subdivision best suited
to personal needs.
There is a grille (if foreseen) on the bottom of the drawer to separate the fruit
and vegetables from any humidity that
may form on the bottom surface.
Remove all parts inside the drawer for
cleaning purposes.
3.11 DYNAMICAIR
The refrigerator compartment is equipped with a device that allows for rapid
cooling of foods and more uniform temperature in the compartment.
This device activates by itself when needed, for example for a quick temperature recovering after door opening or
when the ambient temperature is high.
Allows you to switch on the device manually when needed (refer to "DYNAMICAIR Function").
The DYNAMICAIR device stops when
the door is open and restarts immediately after the door closing.
10 www.aeg.com
4. HELPFUL HINTS AND TIPS
4.1 Hints for energy saving
4.4 Hints for freezing
• Do not open the door frequently or
leave it open longer than absolutely
necessary.
• If the ambient temperature is high and
the Temperature Regulator is set to
low temperature and the appliance is
fully loaded, the compressor may run
continuously, causing frost or ice on
the evaporator. If this happens, set the
Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.
To help you make the most of the freezing process, here are some important
hints:
• the maximum quantity of food which
can be frozen in 24 hrs. is shown on
the rating plate;
• the freezing process takes 24 hours.
No further food to be frozen should
be added during this period;
• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;
• prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required;
• wrap up the food in aluminium foil or
polythene and make sure that the
packages are airtight;
• do not allow fresh, unfrozen food to
touch food which is already frozen,
thus avoiding a rise in temperature of
the latter;
• lean foods store better and longer
than fatty ones; salt reduces the storage life of food;
• water ices, if consumed immediately
after removal from the freezer compartment, can possibly cause the skin
to be freeze burnt;
• it is advisable to show the freezing in
date on each individual pack to enable
you to keep tab of the storage time.
4.2 Hints for fresh food
refrigeration
To obtain the best performance:
• do not store warm food or evaporating liquids in the refrigerator
• do cover or wrap the food, particularly
if it has a strong flavour
• position food so that air can circulate
freely around it
4.3 Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags
and place on the glass shelf above the
vegetable drawer.
For safety, store in this way only one or
two days at the most.
Cooked foods, cold dishes, etc..: these
should be covered and may be placed
on any shelf.
Fruit and vegetables: these should be
thoroughly cleaned and placed in the
special drawer(s) provided.
Butter and cheese: these should be
placed in special airtight containers or
wrapped in aluminium foil or polythene
bags to exclude as much air as possible.
Milk bottles: these should have a cap
and should be stored in the bottle rack
on the door.
Bananas, potatoes, onions and garlic, if
not packed, must not be kept in the refrigerator.
4.5 Hints for storage of frozen
food
To obtain the best performance from
this appliance, you should:
• make sure that the commercially frozen foodstuffs were adequately stored
by the retailer;
• be sure that frozen foodstuffs are
transferred from the foodstore to the
freezer in the shortest possible time;
• not open the door frequently or leave
it open longer than absolutely necessary;
• once defrosted, food deteriorates rapidly and cannot be refrozen;
ENGLISH
11
• do not exceed the storage period indicated by the food manufacturer.
5. CARE AND CLEANING
CAUTION!
Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must
therefore only be carried out by
authorized technicians.
5.1 Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with
lukewarm water and some neutral
soap.
• regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
• rinse and dry thoroughly.
Do not pull, move or damage
any pipes and/or cables inside
the cabinet.
Never use detergents, abrasive
powders, highly perfumed cleaning products or wax polishes to
clean the interior as this will damage the surface and leave a
strong odour.
Clean the condenser (black grill) and the
compressor at the back of the appliance
with a brush. This operation will improve
the performance of the appliance and
save electricity consumption.
Take care of not to damage the
cooling system.
Many proprietary kitchen surface cleaners contain chemicals that can attack/
damage the plastics used in this appliance. For this reason it is recommended
that the outer casing of this appliance is
only cleaned with warm water with a little
washing-up liquid added.
After cleaning, reconnect the equipment
to the mains supply.
12 www.aeg.com
5.2 Defrosting of the refrigerator
Frost is automatically eliminated from
the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough
into a special container at the back of
the appliance, over the motor compressor, where it evaporates.
Periodically clean the defrost water drain
hole in the middle of the refrigerator
compartment channel to prevent the water overflowing and dripping onto the
food inside. Use the special cleaner provided, which you will find already inserted into the drain hole.
5.3 Defrosting of the freezer
The freezer compartment of this model,
on the other hand, is a "no frost" type.
This means that there is no buildup of
frost when it is in operation, neither on
the internal walls nor on the foods.
The absence of frost is due to the continuous circulation of cold air inside the
compartment, driven by an automatically
controlled fan.
• disconnect the appliance from electricity supply
• remove all food
• defrost (if foreseen) and clean the appliance and all accessories
• leave the door/doors ajar to prevent
unpleasant smells.
If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in
case of a power failure.
5.4 Periods of non-operation
When the appliance is not in use for
long periods, take the following precautions:
6. WHAT TO DO IF…
WARNING!
Before troubleshooting, disconnect the mains plug from the
mains socket.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.
There are some sounds during
normal use (compressor, refrigerant circulation).
Problem
Possible cause
Solution
The appliance is
noisy
The appliance is not supported properly
Check if the appliance
stands stable (all the four
feet should be on the
floor)
ENGLISH
Problem
Possible cause
The appliance does
not operate. The
lamp does not operate.
The appliance is switched Switch on the appliance.
off.
13
Solution
The mains plug is not
connected to the mains
socket correctly.
Connect the mains plug to
the mains socket correctly.
The appliance has no
power. There is no voltage in the mains socket.
Connect a different electrical appliance to the mains
socket.
Contact a qualified electrician.
The lamp is in stand-by.
Close and open the door.
The lamp is defective.
Refer to "Replacing the
lamp".
The Pilot light flashes.
The appliance is not
working properly.
Contact a qualified electrician.
The buzzer sounds.
The Alarm light
flashing.
The temperature in the
freezer is too high.
Refer to "High Temperature Alarm".
The compressor operates continually.
The temperature is not
set correctly.
Set a higher temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The door has been
opened too frequently.
Do not keep the door
open longer than necessary.
The product temperature
is too high.
Let the product temperature decrease to room
temperature before storage.
The room temperature is
too high.
Decrease the room temperature.
The lamp does not
work.
The compressor
This is normal, no error
does not start imme- has occurred.
diately after pressing the FROSTMATIC or COOLMATIC
button, or after
changing the temperature.
The compressor starts after a period of time.
Water flows on the
rear plate of the refrigerator.
This is correct.
During the automatic defrosting process, frost defrosts on the rear plate.
14 www.aeg.com
Problem
Possible cause
Solution
Water flows into the
refrigerator.
The water outlet is clogged.
Clean the water outlet.
Products prevent that wa- Make sure that products
ter flows into the water
do not touch the rear
collector.
plate.
Temperature cannot
be set .
FROSTMATIC or COOL- Switch off FROSTMATIC or
MATIC functions switched COOLMATIC manually, or
on.
wait to set the temperature
until the function has reset
automatically. Refer to
"FROSTMATIC or COOLMATIC function"..
The temperature in
the appliance is too
low/high.
The temperature regulator is not set correctly.
Set a higher/lower temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The product temperature
is too high.
Let the product temperature decrease to room
temperature before storage.
Many products are stored Store less products at the
at the same time.
same time.
The temperature in
the refrigerator is
too high.
There is no cold air circulation in the appliance.
Make sure that there is
cold air circulation in the
appliance.
The temperature in
the freezer is too
high.
Products are too near to
each other.
Store products so that
there is cold air circulation.
6.1 Replacing the lamp
The appliance is equipped with a longlife LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service
Center.
6.2 Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer
to "Installation".
3. If necessary, replace the defective
door gaskets. Contact the Service
Center.
ENGLISH
15
7. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and correct operation of the appliance
before installing the appliance.
1
2
7.1 Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Climate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
7.2 Electrical Connection
CAUTION!
Any electrical work required to
install this appliance should be
carried out by a qualified electrician or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
3
5
4
The wires in the mains lead are
coloured in accordance with the
following code:
1 Green and Yellow:
Earth
3 Brown:
Live
5 Blue:
Neutral
As the colours of the wires in the mains
lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
1. Connect the wire coloured green
and yellow to the terminal marked
either with the letter “E“ or by the
or coloured green
earth symbol
and yellow.
2. Connect the wire coloured blue to
the terminal either marked with the
letter “N“ or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
“L“ or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
4 is secure over the outer sheath.
5. Make sure the electricity supply voltage is the same as that indicated on
the appliance rating plate.
16 www.aeg.com
6.
Switch on the appliance.
The appliance is supplied with a 13 amp
plug fitted 2 . In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse
must be used.
WARNING!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that it is
disposed of safely.
7.3 Door reversibility
The door of the appliance opens to the
right. If you want to open the door to the
left, do these steps before you install the
appliance:
• Loosen the upper pin and remove the
spacer.
• Remove the upper pin and the upper
door.
• Unscrew the pins (B) and spacers (C).
C
B
C
• Remove the lower door.
• Loosen the lower pin.
On the opposite side:
• Install the lower pin.
• Install the lower door.
• Refit the pins (B) and the spacers (C)
on the middle hinge on the opposite
side.
• Install the upper door.
• Tighten the spacer and the upper pin.
ENGLISH
17
7.4 Ventilation requirements
5 cm
The airflow behind the appliance must
be sufficient.
min.
200 cm2
min.
200 cm2
7.5 Installing the appliance
Do these steps.
CAUTION!
Make sure that the mains cable
can move freely.
If necessary cut the adhesive sealing strip
and then apply it to the appliance as
shown in figure.
x
x
Drill the hinge cover A, as shown in figure.
Apply the covers A and A1 (in the accessories bag) in to the middle hinge.
A
A1
18 www.aeg.com
2
Install the appliance in the niche.
Push the appliance in the direction of the
arrow (1) until the upper gap cover stops
against the kitchen furniture.
Push the appliance in the direction of the
arrow (2) against the cupboard on the opposite side of the hinge.
1
Adjust the appliance in the niche.
Make sure that the distance between the
appliance and the cupboard front-edge is
44 mm.
The lower hinge cover (in the accessories
bag) makes sure that the distance between the appliance and the kitchen furniture is correct.
Make sure that the clearance between the
appliance and the cupboard is 4 mm.
Open the door. Put the lower hinge cover
in position.
4 mm
44 mm
Attach the appliance to the niche with 4
screws.
I
I
ENGLISH
19
Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in opposite case.
Attach the covers (C, D) to the lugs and
the hinge holes.
Install the vent grille (B).
Attach the hinge covers (E) to the hinge.
C
D
E
E
B
If the appliance must connect laterally to
the kitchen furniture door:
1. Slacken the screws in fixing brackets
(H).
2. Move the brackets (H).
3. Retighten the screws.
H
H
20 www.aeg.com
Disconnect the parts (Ha), (Hb), (Hc) and
(Hd).
Install the part (Ha) on the inner side of
the kitchen furniture.
ca. 50 mm
90°
21 mm
90°
ca. 50 mm
21 mm
Push the part (Hc) on the part (Ha).
Ha
Hc
Open the appliance door and the kitchen
furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and the
furniture door and mark the holes.
8 mm
Ha
Hb
ENGLISH
21
Remove the brackets and mark a distance
of 8 mm from the outer edge of the door
where the nail must be fitted (K).
8 mm
K
Ha
Place the small square on the guide again
and fix it with the screws supplied.
Align the kitchen furniture door and the
appliance door by adjusting the part (Hb).
Hb
Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
8. NOISES
There are some sounds during normal
running (compressor, refrigerant circulation).
• The sealing strip is attached tightly to
the cabinet.
• The door opens and closes correctly.
22 www.aeg.com
SSS
RRR
!
HISSS!
OK
BL
SSSRRR!
HISSS!
BLUBB!
SSSRRR!
HISSS!
BLUBB!
UB
B!
CLICK!
BRRR!
CRACK!
IC
CL
K!
BRRR!
CR
AC
K!
CLICK!
BRRR!
CRACK!
ENGLISH
9. TECHNICAL DATA
Dimension of the recess
Height
1850 mm
Width
560 mm
Depth
560 mm
Rising Time
21 h
Voltage
230-240 V
Frequency
50 Hz
The technical information are situated in
the rating plate on the internal left side
of the appliance and in the energy label.
10. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
23
222356013-A-142012
www.aeg.com/shop
Download PDF

advertising