Zanussi | ZBA32050SA | User manual | ZANUSSI ZBA32050SA User Manual

User Manual
GETTING
STARTED?
EASY.
ZBA32050SA
EN User Manual
Refrigerator
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible
location for future reference.
CHILDREN AND VULNERABLE PEOPLE SAFETY
•
•
•
•
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Do not let children play with the appliance.
Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
Keep all packaging away from children and dispose of it
appropriately.
GENERAL SAFETY
•
•
•
•
•
•
2
This appliance is intended to be used in household and similar
applications such as:
– Farm houses; staff kitchen areas in shops, offices and other
working environments
– By clients in hotels, motels, bed and breakfast and other
residential type environments
Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
Do not use water spray and steam to clean the appliance.
•
•
•
Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
SAFETY INSTRUCTIONS
INSTALLATION
WARNING! Only a qualified person
must install this appliance.
•
•
•
•
•
•
•
•
•
•
•
•
Remove all the packaging and the transit bolts.
Do not install or use a damaged appliance.
Follow the installation instruction supplied with
the appliance.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Make sure the air can circulate around the
appliance.
At first installation or after reversing the door
wait at least 4 hours before connecting the
appliance to the power supply. This is to allow
the oil to flow back in the compressor.
Before carrying out any operations on the
appliance (e.g. reversing the door), remove the
plug from the power socket.
Do not install the appliance close to radiators or
cookers, ovens or hobs.
Do not install the appliance where there is direct
sunlight.
Do not install this appliance in areas that are too
humid or too cold, such as the construction
appendices, garages or wine cellars.
When you move the appliance, lift it by the front
edge to avoid scratching the floor.
The appliance contains a bag of desiccant. This
is not a toy. This is not food. Please dispose of it
immediately.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electrical
shock.
•
The appliance must be earthed.
•
•
•
•
•
•
•
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Always use a correctly installed shockproof
socket.
Do not use multi-plug adapters and extension
cables.
Make sure not to cause damage to the electrical
components (e.g. mains plug, mains cable,
compressor). Contact the Authorised Service
Centre or an electrician to change the electrical
components.
The mains cable must stay below the level of the
mains plug.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
USE
WARNING! Risk of injury, burns,
electrical shock or fire.
•
•
•
•
•
Do not change the specification of this
appliance.
Do not put electrical appliances (e.g. ice cream
makers) in the appliance unless they are stated
applicable by the manufacturer.
Be careful not to cause damage to the
refrigerant circuit. It contains isobutane (R600a),
a natural gas with a high level of environmental
compatibility. This gas is flammable.
If damage occurs to the refrigerant circuit, make
sure that there are no flames and sources of
ignition in the room. Ventilate the room.
Do not let hot items to touch the plastic parts of
the appliance.
3
•
•
•
Do not store flammable gas and liquid in the
appliance.
Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
Do not touch the compressor or the condenser.
They are hot.
INTERNAL LIGHT
• The type of lamp used for this appliance is not
suitable for household room illumination
WARNING! Risk of injury or damage
to the appliance.
•
Before maintenance, deactivate the appliance
and disconnect the mains plug from the mains
socket.
This appliance contains hydrocarbons in the
cooling unit. Only a qualified person must do the
maintenance and the recharging of the unit.
Regularly examine the drain of the appliance and
if necessary, clean it. If the drain is blocked,
defrosted water collects in the bottom of the
appliance.
DISPOSAL
WARNING! Risk of injury or
suffocation.
•
•
•
CARE AND CLEANING
•
•
•
•
•
Disconnect the appliance from the mains
supply.
Cut off the mains cable and discard it.
Remove the door to prevent children and pets
to be closed inside of the appliance.
The refrigerant circuit and the insulation
materials of this appliance are ozone-friendly.
The insulation foam contains flammable gas.
Contact your municipal authority for information
on how to discard the appliance correctly.
Do not cause damage to the part of the cooling
unit that is near the heat exchanger.
OPERATION
CONTROL PANEL
1
2
1 Temperature indicator LED
2 QuickChill indicator
3 QuickChill button
4 Temperature regulator
ON/OFF button
4
3
SWITCHING ON
1. Insert the plug into the wall socket.
2. Touch the temperature regulator button if all
LED are off.
SWITCHING OFF
Keep touching the temperature regulator button for
3 seconds.
All indicators light off.
4
TEMPERATURE REGULATION
To operate the appliance, touch the temperature
regulator until the LED corresponding to the
required temperature lights up. Selection is
progressive, varying from 2°C to 8°C.
Coldest setting: +2°C.
Warmest setting: +8°C.
A medium setting is generally the most
suitable.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
• room temperature
• frequency of opening the door
• quantity of food stored
• appliance location.
1. Touch temperature regulator.
Current temperature indicator blinks. Any time you
touch the temperature regulator, the setting moves
by one position. The corresponding LED blinks for
a while.
2. Touch the temperature regulator until the
required temperature is selected.
QUICKCHILL FUNCTION
You can activate QuickChillfunction by pressing the
QuickChill button.
The LED corresponding to the symbol QuickChill
indicator lights up.
You can deactivate QuickChillfunction by pressing
the button again.
The QuickChill indicator will light off.
This function stops automatically after
6 hours.
DAILY USE
WARNING! Refer to Safety chapters.
CLEANING THE INTERIOR
Before using the appliance for the first time, the
interior and all internal accessories should be
washed with lukewarm water and some neutral
soap to remove the typical smell of a brand-new
product, then dried thoroughly.
MOVABLE SHELVES
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
CAUTION! Do not use detergents,
abrasive powders, chlorine or oilbased cleaners as they will damage
the finish.
Do not move the glass shelf above the
vegetable drawer to ensure correct air
circulation.
POSITIONING THE DOOR SHELVES
To permit storage of food packages of various
sizes, the door shelves can be placed at different
heights.
1. Gradually pull the shelf in the direction of the
arrows until it comes free.
2. Reposition as required.
1
2
3
HINTS AND TIPS
NORMAL OPERATING SOUNDS
The following sounds are normal during operation:
•
A faint gurgling and bubbling sound from coils
sound when refrigerant is pumped.
5
•
•
•
A whirring and pulsating sound from the
compressor when refrigerant is pumped.
A sudden cracking noise from inside appliance
caused by thermic dilatation (a natural and not
dangerous physical phenomenon).
A faint click noise from the temperature
regulator when the compressor switches on or
off.
HINTS FOR ENERGY SAVING
• Do not open the door frequently or leave it open
longer than absolutely necessary.
• If the ambient temperature is high and the
Temperature Regulator is set to low temperature
and the appliance is fully loaded, the
compressor may run continuously, causing frost
or ice on the evaporator. If this happens, set the
Temperature Regulator toward warmer settings
to allow automatic defrosting and so a saving in
electricity consumption.
HINTS FOR FRESH FOOD REFRIGERATION
To obtain the best performance:
• do not store warm food or evaporating liquids in
the refrigerator
•
•
do cover or wrap the food, particularly if it has a
strong flavour
position food so that air can circulate freely
around it
HINTS FOR REFRIGERATION
Useful hints:
• Meat (all types): wrap in a suitable packaging
and place it on the glass shelf above the
vegetable drawer. Store meat for at most 1-2
days.
• Cooked foods, cold dishes: cover and place on
any shelf.
• Fruit and vegetables: clean thoroughly and
place in a special drawer. Bananas, potatoes,
onions and garlic must not be kept in the
refrigerator if not packed.
• Butter and cheese: place in a special airtight
container or wrap in an aluminium foil or a
polythene bag to exclude as much air as
possible.
• Bottles: close with a cap and place on the door
bottle shelf, or (if available) on the bottle rack.
CARE AND CLEANING
WARNING! Refer to Safety chapters.
GENERAL WARNINGS
CAUTION! Unplug the appliance
before carrying out any maintenance
operation.
This appliance contains hydrocarbons
in its cooling unit; maintenance and
recharging must therefore only be
carried out by authorized technicians.
The accessories and parts of the
appliance are not suitable for washing
in a dishwasher.
PERIODIC CLEANING
CAUTION! Do not pull, move or
damage any pipes and/or cables
inside the cabinet.
CAUTION! Take care of not to
damage the cooling system.
6
CAUTION! When moving the cabinet,
lift it by the front edge to avoid
scratching the floor.
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe clean
to ensure they are clean and free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser and the
compressor at the back of the appliance with a
brush.
This operation will improve the performance of
the appliance and save electricity consumption.
DEFROSTING OF THE REFRIGERATOR
Frost is automatically eliminated from the
evaporator of the refrigerator compartment every
time the motor compressor stops, during normal
use. The defrost water drains out through a trough
into a special container at the back of the
appliance, over the motor compressor, where it
evaporates.
It is important to periodically clean the defrost water
drain hole in the middle of the refrigerator
compartment channel to prevent the water
overflowing and dripping onto the food inside.
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Clean the appliance and all accessories.
4. Leave the door/doors open to prevent
unpleasant smells.
WARNING! If you want to keep the
appliance switched on, ask somebody
to check it once in a while to prevent
the food inside from spoiling in case of
a power failure.
PERIODS OF NON-OPERATION
When the appliance is not in use for long periods,
take the following precautions:
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
Possible cause
The appliance does not operate.
The appliance is switched
off.
Switch on the appliance.
The mains plug is not connected to the mains socket
correctly.
Connect the mains plug to the
mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electrical appliance to the mains socket.
Contact a qualified electrician.
The appliance is not supported properly.
Check if the appliance stands
stable.
The appliance is noisy.
Solution
The lamp does not work.
The lamp is in stand-by.
Close and open the door.
The lamp does not work.
The lamp is defective.
Contact the nearest Authorised
Service Centre.
The compressor operates continually.
Temperature is set incorrectly.
Refer to "Operation".
Many food products were
put in at the same time.
Wait some hours and then check
the temperature again.
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before storing.
7
Problem
Solution
The door is not closed correctly.
Refer to "Closing the door".
The QuickChill is switched
on.
Refer to "QuickChill ".
The door is not closed correctly or the gasket is deformed/dirty.
Refer to "Closing the door".
The water drainage plug is
not correctly positioned.
Position the water drainage plug
in the correct way.
Food products are not wrapped properly.
Wrap the food products better.
Temperature is set incorrectly.
Refer to "Operation" .
The compressor does not start
immediately after pressing the
QuickChill, or after changing
the temperature.
This is normal, no error has
occurred.
The compressor starts after a period of time.
Water flows on the rear plate
of the refrigerator.
During the automatic defrosting process, frost melts
on the rear plate.
This is correct.
Water flows inside the refrigerator.
The water outlet is clogged.
Clean the water outlet.
Food products prevent that
water flows into the water
collector.
Make sure that food products do
not touch the rear plate.
Water flows on the floor.
The melting water outlet is
not connected to the evaporative tray above the compressor.
Attach the melting water outlet to
the evaporative tray.
The temperature in the appliance is too low/too high.
The temperature regulator is
not set correctly.
Set a higher/lower temperature.
The door is not closed correctly.
Refer to "Closing the door".
The food products' temperature is too high.
Let the food products temperature decrease to room temperature before storage.
Many food products are stored at the same time.
Store less food products at the
same time.
The door has been opened
often.
Open the door only if necessary.
There is no cold air circulation in the appliance.
Make sure that there is cold air
circulation in the appliance.
There is too much frost and
ice.
8
Possible cause
If the advice does not lead to the
desired result, contact the nearest
Authorised Service Centre.
REPLACING THE LAMP
The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Authorised Service Centre.
CLOSING THE DOOR
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to assembly
instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
INSTALLATION
WARNING! Refer to Safety chapters.
LOCATION
Refer to the assembly instructions for
the installation.
To ensure best performance, install the appliance
well away from sources of heat such as radiators,
boilers, direct sunlight etc. Make sure that air can
circulate freely around the back of the cabinet.
POSITIONING
Install the appliance in a dry, well ventilated indoors
where the ambient temperature corresponds to the
climate class indicated on the rating plate of the
appliance.
Climate
class
ELECTRICAL CONNECTION
CAUTION! Any electrical work
required to install this appliance
should be carried out by a qualified
electrician or competent person.
WARNING! This appliance must be
earthed.
The manufacturer declines any liability
should these safety measures not be
observed.
The wires in the mains lead are coloured in
accordance with the following code:
A
B
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Some functional problems might occur
for some types of models when
operating outside of that range. The
correct operation can only be
guaranteed within the specified
temperature range. If you have any
doubts regarding where to install the
appliance, please turn to the vendor,
to our customer service or to the
nearest Authorised Service Centre.
C
D
E
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
9
1. Connect the wire coloured green and yellow to
the terminal marked either with the letter “E“ or
supplied, a 13 amp ASTA approved (BS 1362)
fuse must be used.
by the earth symbol
or coloured green and
yellow.
2. Connect the wire coloured blue to the terminal
either marked with the letter “N“ or coloured
black.
3. Connect the wire coloured brown to the
terminal either marked with the “L“ or coloured
red.
4. Check that no cut, or stray strands of wire is
present and the cord clamp (E) is secure over
the outer sheath.
Make sure the electricity supply voltage is the
same as that indicated on the appliance rating
plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse (B).
In the event of having to change the fuse in the plug
WARNING! A cut off plug inserted
into a 13 amp socket is a serious
safety (shock) hazard. Ensure that it is
disposed of safely.
VENTILATION REQUIREMENTS
The airflow behind the appliance must be sufficient.
5 cm
min. 200cm2
min.
200cm2
TECHNICAL DATA
TECHNICAL DATA
Dimensions of the recess
Height
mm
1780
Width
mm
560
Depth
mm
550
Voltage
Volts
230-240
Frequency
Hz
50
The technical information is situated in the rating
plate, on the external or internal side of the
appliance and in the energy label.
ENVIRONMENTAL CONCERNS
the symbol with the household waste. Return the
product to your local recycling facility or contact
your municipal office.
Recycle the materials with the symbol
. Put the
packaging in applicable containers to recycle it.
Help protect the environment and human health
and to recycle waste of electrical and electronic
appliances. Do not dispose appliances marked with
10
*
11
222373224-A-032017
WWW.ZANUSSI.COM/SHOP
Download PDF

advertising