AEG SCE81816TC User manual

AEG SCE81816TC User manual




EN User Manual

Fridge Freezer



1. SAFETY INFORMATION............................................................................................. 2

2. SAFETY INSTRUCTIONS.............................................................................................4

3. OPERATION.................................................................................................................5

4. DAILY USE.................................................................................................................... 8

5. HINTS AND TIPS........................................................................................................10

6. CARE AND CLEANING.............................................................................................11

7. TROUBLESHOOTING............................................................................................... 12

8. INSTALLATION..........................................................................................................15

9. NOISES.......................................................................................................................17

10. TECHNICAL DATA..................................................................................................18


Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

Register your product for better service:

Buy Accessories, Consumables and Original spare parts for your appliance:


Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.



Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or

ENGLISH usage. Always keep the instructions in a safe and accessible location for future reference.


Children and vulnerable people safety

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.

Do not let children play with the appliance.

Children shall not carry out cleaning and user maintenance of the appliance without supervision.

Keep all packaging away from children and dispose of it appropriately.


General Safety

This appliance is intended to be used in household and similar applications such as:

Farm houses; staff kitchen areas in shops, offices and other working environments

By clients in hotels, motels, bed and breakfast and other residential type environments

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

Do not use water spray and steam to clean the appliance.

Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.



Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.



2.1 Installation


Only a qualified person must install this appliance.

• Remove all the packaging and the transit bolts.

• Do not install or use a damaged appliance.

• Follow the installation instruction supplied with the appliance.

• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.

• Make sure the air can circulate around the appliance.

• At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.

• Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.

• Do not install the appliance close to radiators or cookers, ovens or hobs.

• Do not install the appliance where there is direct sunlight.

• Do not install this appliance in areas that are too humid or too cold, such as the construction appendices, garages or wine cellars.

• When you move the appliance, lift it by the front edge to avoid scratching the floor.

• The appliance contains a bag of desiccant. This is not a toy. This is not food. Please dispose of it immediately.

2.2 Electrical connection


Risk of fire and electrical shock.

• The appliance must be earthed.

• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.

• Always use a correctly installed shockproof socket.

• Do not use multi-plug adapters and extension cables.

• Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor).

Contact the Authorised Service

Centre or an electrician to change the electrical components.

• The mains cable must stay below the level of the mains plug.

• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.




Risk of injury, burns, electrical shock or fire.

• Do not change the specification of this appliance.

• Do not put electrical appliances (e.g.

ice cream makers) in the appliance unless they are stated applicable by the manufacturer.

• Be careful not to cause damage to the refrigerant circuit. It contains

isobutane (R600a), a natural gas with a high level of environmental compatibility. This gas is flammable.

• If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.

• Do not let hot items to touch the plastic parts of the appliance.

• Do not put soft drinks in the freezer compartment. This will create pressure on the drink container.

• Do not store flammable gas and liquid in the appliance.

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

• Do not touch the compressor or the condenser. They are hot.

• Do not remove or touch items from the freezer compartment if your hands are wet or damp.

• Do not freeze again food that has been thawed.

• Obey the storage instructions on the packaging of frozen food.

2.4 Internal light

• The type of lamp used for this appliance is not suitable for household room illumination

2.5 Care and cleaning


Risk of injury or damage to the appliance.



3.1 Control Panel


• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.

• This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.

• Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.




Risk of injury or suffocation.

• Disconnect the appliance from the mains supply.

• Cut off the mains cable and discard it.

• Remove the door to prevent children and pets to be closed inside of the appliance.

• The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.

• The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.

• Do not cause damage to the part of the cooling unit that is near the heat exchanger.



8 7 6 5 4 3 2




Freezer Temperature warmer button


Freezer Temperature colder button







Fridge Temperature warmer button


Fridge Temperature colder button



3.2 Display







It is possible to change predefined sound of buttons by pressing together

Mode and temperature colder button for a few seconds. Change is reversible.


Fridge compartment indicator


Timer indicator

/Temperature indicator


ON/OFF indicator


COOLMATIC function


Holiday function




Temperature indicator


Freezer compartment indicator


Alarm indicator


ChildLock function


MinuteMinder function



3.3 Switching on


Connect the mains plug to the power socket.


Press the appliance ON/OFF if the display is off. The temperature indicators show the set default temperature.

The alarm buzzer could operate after few seconds.

To reset the alarm refer to

"High temperature alarm".

To select a different set temperature refer to "Temperature regulation".

If "dEMo" appears on the display, refer to "Troubleshooting" .

3.4 Switching off


Press the appliance ON/OFF for 5 seconds.

The display switches off.


Disconnect the mains plug from the power socket.


Temperature regulation

Set the temperature of the appliance by pressing the temperature regulators.

Default set temperature:

• +5°C for the fridge

• -18°C for the freezer

The temperature indicators show the set temperature.

The set temperature will be reached within 24 hours.

After a power failure the set temperature remains stored.


Switching on the fridge

To switch on the fridge it is enough to press the fridge temperature regulator.

To switch on the fridge in the other way:


Press Mode until the corresponding icon appears.

The Fridge OFF indicator flashes.


Press OK to confirm.

The fridge OFF indicator goes off.

To select a different set temperature refer to

"Temperature regulation".

3.7 Switching off the fridge


Press Mode until the corresponding icon appears.

The fridge OFF indicator and the fridge compartment indicator flash.

The fridge temperature indicator shows dashes.


Press OK to confirm.

The fridge OFF indicator is shown.

3.8 High temperature alarm

An increase in the temperature in the freezer compartment (for example due to an earlier power failure) is indicated by flashing the alarm icon and freezer temperature indicators, and sounding of buzzer.

Press any button.

The buzzer switches off.

The freezer temperature indicator shows the highest temperature reached for a few seconds, then displays the set temperature again.

The alarm indicator continues to flash until the normal conditions are restored.

3.9 COOLMATIC function

If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the COOLMATIC function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator.


Press the Mode until the corresponding icon appears.

The COOLMATIC indicator flashes.


Press the OK to confirm.

The COOLMATIC indicator is shown.

The COOLMATIC function shuts off automatically after approximately 6 hours.

To switch off the function before its automatic end, repeat the procedure.

The function switches off by selecting a different fridge set temperature.

3.10 Holiday function

This function allows you to keep the appliance closed and empty during a long holiday period without the formation of bad odours.


Press the Mode until the corresponding icon appears.


The Holiday indicator flashes. The temperature indicator shows the set temperature.


Press the OK to confirm.

The Holiday indicator is shown.

The function switches off by selecting a different set temperature.

3.11 FROSTMATIC function

The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming.


To activate this function press the

Mode button until the corresponding icon appears.

The FROSTMATIC indicator flashes.


Press the OK button to confirm.

TheFROSTMATIC indicator is shown.

This function stops automatically after 52 hours.

To switch off the function before its automatic end repeat the procedure until the FROSTMATIC indicator turns off.

The function switches off by selecting a different set temperature.

3.12 Door open alarm

An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by:

• a flashing Alarm indicator;

• an acoustic buzzer.

When normal conditions are restored

(door closed), the alarm will stop. The buzzer can also be switched off by pressing any button.

3.13 ChildLock function

Activate the ChildLock function to lock the buttons from unintentional operation.


Press Mode until the corresponding icon appears.

The ChildLock indicator flashes.


Press OK to confirm.

The ChildLock indicator is shown.



To deactivate the ChildLock function, repeat the procedure until the ChildLock indicator goes off.

3.14 MinuteMinder function

The MinuteMinder function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down food products for a certain period of time.

It is also useful when a reminder is needed in order not to forget the bottles placed in the freezer for fast cooling.


Press Mode until the corresponding icon appears.

The MinuteMinder indicator flashes.

The Timer shows the set value (30 minutes) for a few seconds.


Press the Timer regulator to change the Timer set value from 1 to 90 minutes.


Press OK to confirm.

TheMinuteMinder indicator is shown.

The Timer start to flash (min).

At the end of the countdown the

MinuteMinder indicator flashes and an audible alarm sounds. Press OK to switch off the sound and terminate the function.




Refer to Safety chapters.

4.1 Cleaning the interior

Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brandnew product, then dried thoroughly.


Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.

To switch off the function repeat the procedure until the MinuteMinder goes off.

It is possible to change the time at any time during the countdown and at the end by pressing the Temperature colder button and the

Temperature warmer button.

3.15 DYNAMICAIR function


Press Mode until the corresponding icon appears.

The DYNAMICAIR indicator flashes.


Press the OK to confirm.

The DYNAMICAIR indicator appears.

To switch off the function, repeat the procedure until the DYNAMICAIR indicator goes off.

The activation of the

DYNAMICAIR function increases energy consumption.

If the function is activated automatically the

DYNAMICAIR indicator is not shown (refer to "Daily use").

4.2 Positioning the door shelves

To permit storage of food packages of various sizes, the door shelves can be placed at different heights.


Gradually pull the shelf in the direction of the arrows until it comes free.


Reposition as required.

This model is equipped with a variable storage box which can be moved sideways.

4.3 Movable shelves

The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.



Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.

4.4 Freezing fresh food

The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.


To freeze fresh food activate the

FROSTMATIC function and place the food to be frozen in the freezer compartment.

To freeze fresh food activate the

FROSTMATIC function at least 24 hours before placing the food to be frozen in the freezer compartment.

Place the fresh food to be frozen in the top compartment.

The maximum amount of food that can be frozen in 24 hours is specified on the rating plate , a label located on the inside of the appliance.

The freezing process lasts 24 hours: during this period do not add other food to be frozen.

When the freezing process is completed, return to the required temperature (see

"FROSTMATIC Function").

In this condition, the refrigerator compartment temperature might drop below 0°C. If this occurs reset the temperature regulator to a warmer setting.


Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the compartment let the appliance run at least 2 hours on the higher settings.


In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer than the value shown in the technical characteristics chart under

"rising time", the defrosted food must be consumed quickly or cooked immediately and then refrozen (after cooling).

4.6 Thawing

Deep-frozen or frozen food, prior to being used, can be thawed in the



refrigerator compartment or at room temperature, depending on the time available for this operation.

Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer.


The refrigerator compartment is equipped with a device that allows rapid cooling of food and keeps a more uniform temperature in the compartment.

This device activates automatically when needed, for example for a quick temperature recovery after door opening or when the ambient temperature is high.

It is possible to switch on the device manually when needed (refer to

"DYNAMICAIR function").

The DYNAMICAIR device stops when the door is open and restarts immediately after the door closing.

4.8 Ice-cube production

This appliance is equipped with one or more trays for the production of icecubes.

Do not use metallic instruments to remove the trays from the freezer.


Fill these trays with water


Put the ice trays in the freezer compartment.


Cold accumulators

The freezer contains at least one cold accumulator which increases storage time in the event of a power cut or breakdown.



5.1 Normal operating sounds

The following sounds are normal during operation:

• A faint gurgling and bubbling sound from coils sound when refrigerant is pumped.

• A whirring and pulsating sound from the compressor when refrigerant is pumped.

• A sudden cracking noise from inside appliance caused by thermic dilatation (a natural and not dangerous physical phenomenon).

• A faint click noise from the temperature regulator when the compressor switches on or off.


Hints for energy saving

• Do not open the door frequently or leave it open longer than absolutely necessary.

• If the ambient temperature is high and the Temperature Regulator is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.

• If foreseen, do not remove the cold accumulators from the freezer basket.

5.3 Hints for fresh food refrigeration

To obtain the best performance:

• do not store warm food or evaporating liquids in the refrigerator

• do cover or wrap the food, particularly if it has a strong flavour

• position food so that air can circulate freely around it

5.4 Hints for refrigeration

Useful hints:

• Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer.

Store meat for at most 1-2 days.

• Cooked foods, cold dishes: cover and place on any shelf.

• Fruit and vegetables: clean thoroughly and place in a special drawer. Bananas, potatoes, onions and garlic must not be kept in the refrigerator if not packed.

• Butter and cheese: place in a special airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible.

• Bottles: close with a cap and place on the door bottle shelf, or (if available) on the bottle rack.

5.5 Hints for freezing

To help you make the most of the freezing process, here are some important hints:

• the maximum quantity of food which can be frozen in 24 hours is shown on the rating plate;

• the freezing process takes 24 hours no further food to be frozen should be added during this period;

• freeze only top quality, fresh and thoroughly cleaned, foodstuffs;

• prepare food in small portions to enable it to be rapidly and completely




Refer to Safety chapters.


General warnings


Unplug the appliance before carrying out any maintenance operation.

ENGLISH 11 frozen and to make it possible subsequently to thaw only the quantity required;

• wrap up the food in aluminium foil or polythene and make sure that the packages are airtight;

• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter;

• lean foods store better and longer than fatty ones; salt reduces the storage life of food;

• water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt;

• it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time.

5.6 Hints for storage of frozen food

To obtain the best performance from this appliance, you should:

• make sure that the commercially frozen foodstuffs were adequately stored by the retailer;

• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time;

• not open the door frequently or leave it open longer than absolutely necessary;

• once defrosted, food deteriorates rapidly and cannot be refrozen;

• do not exceed the storage period indicated by the food manufacturer.

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.

The accessories and parts of the appliance are not suitable for washing in a dishwasher.


6.2 Periodic cleaning


Do not pull, move or damage any pipes and/or cables inside the cabinet.


Take care of not to damage the cooling system.


When moving the cabinet, lift it by the front edge to avoid scratching the floor.

The equipment has to be cleaned regularly:


Clean the inside and accessories with lukewarm water and some neutral soap.


Regularly check the door seals and wipe clean to ensure they are clean and free from debris.


Rinse and dry thoroughly.


If accessible, clean the condenser and the compressor at the back of the appliance with a brush.

This operation will improve the performance of the appliance and save electricity consumption.

6.3 Defrosting of the refrigerator

Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use.

The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.

It is important to periodically clean the defrost water drain hole in the middle of




Refer to Safety chapters.

the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside.

6.4 Defrosting the freezer

The freezer compartment is frost free.

This means that there is no build up of frost when it is in operation, neither on the internal walls nor on the foods.

6.5 Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:


Disconnect the appliance from electricity supply.


Remove all food.


Clean the appliance and all accessories.


Leave the door/doors open to prevent unpleasant smells.


If you want to keep the appliance switched on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.

We recommend activating

Holiday mode.


7.1 What to do if...


The appliance does not operate.

Possible cause

The appliance is switched off.


Switch on the appliance.

The mains plug is not connected to the mains socket correctly.

Connect the mains plug to the mains socket correctly.

There is no voltage in the mains socket.

Connect a different electrical appliance to the mains socket.

Contact a qualified electrician.

The appliance is noisy.

The appliance is not supported properly.

Audible or visual alarm is on. The cabinet has been recently switched on or the temperature is still too high.

Check if the appliance stands stable.

Refer to "Door open alarm"or

"High temperature alarm".

The temperature in the appliance is too high.

Refer to "Door open alarm"or

"High temperature alarm".

A square symbol is shown instead of numbers on the

Temperature Display.

Temperature sensor problem.

The lamp does not work.

The lamp does not work.

The door is left open.

Close the door.

The temperature in the appliance is too high.

Contact a qualified electrician or contact the nearest Authorised Service Centre.

The lamp is in stand-by.

The lamp is defective.

Contact the nearest Authorised Service Centre (the cooling system will continue to keep food products cold, but temperature adjustment will not be possible).

Close and open the door.

Contact the nearest Authorised Service Centre.

The compressor operates continually.

Temperature is set incorrectly.

Many food products were put in at the same time.

The room temperature is too high.

Food products placed in the appliance were too warm.

Refer to "Operation".

Wait some hours and then check the temperature again.

Refer to climate class chart on the rating plate.

Allow food products to cool to room temperature before storing.


Problem Possible cause

The door is not closed correctly.


Refer to "Closing the door".

There is too much frost and ice.

The FROSTMATIC is switched on.

The COOLMATIC is switched on.

Refer to "FROSTMATIC function".

Refer to "COOLMATIC function".

Refer to "Closing the door".

The door is not closed correctly or the gasket is deformed/dirty.

The water drainage plug is not correctly positioned.

Food products are not wrapped properly.

Position the water drainage plug in the correct way.

Wrap the food products better.

Refer to "Operation" .

Temperature is set incorrectly.

This is normal, no error has occurred.

The compressor starts after a period of time.

The compressor does not start immediately after pressing the FROSTMATIC, or after changing the temperature.

The compressor does not start immediately after pressing the COOLMATIC, or after changing the temperature.

Water flows on the rear plate of the refrigerator.

This is normal, no error has occurred.

During the automatic defrosting process, frost melts on the rear plate.

Water flows inside the refrigerator.

The water outlet is clogged.

Water flows on the floor.

Food products prevent that water flows into the water collector.

The melting water outlet is not connected to the evaporative tray above the compressor.

The compressor starts after a period of time.

This is correct.

Clean the water outlet.

Make sure that food products do not touch the rear plate.

Attach the melting water outlet to the evaporative tray.


Problem dEMo appears on the display.

The temperature in the appliance is too low/too high.

Possible cause

Temperature cannot be set.


COOLMATIC function is switched on.


Switch off FROSTMATIC or

COOLMATIC manually, or wait until the function resets automatically to set the temperature. Refer to "FROSTMATIC or COOLMATIC function".

The appliance is in demonstration mode.

Keep the OK pressed for approximately 10 seconds until a long sound is heard and display shuts off for a short time.

The temperature regulator is not set correctly.

Set a higher/lower temperature.

The door is not closed correctly.

Refer to "Closing the door".

The food products' temperature is too high.

Many food products are stored at the same time.

Let the food products temperature decrease to room temperature before storage.

Store less food products at the same time.

The door has been opened often.

There is no cold air circulation in the appliance.

Open the door only if necessary.

Make sure that there is cold air circulation in the appliance.

If the advice does not lead to the desired result, contact the nearest Authorised

Service Centre.

7.2 Replacing the lamp

The appliance is equipped with a longlife

LED interior light.

Only service is allowed to replace the lighting device. Contact your Authorised

Service Centre.



8.1 Location

Refer to the assembly instructions for the installation.

7.3 Closing the door


Clean the door gaskets.


If necessary, adjust the door. Refer to assembly instructions.


If necessary, replace the defective door gaskets. Contact the Authorised

Service Centre.

To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet.


8.2 Positioning

Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance.

Climate class





Ambient temperature

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service


8.3 Electrical Connection


Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.


This appliance must be earthed.

The manufacturer declines any liability should these safety measures not be observed.

The wires in the mains lead are coloured in accordance with the following code:





• A - green and yellow: Earth

• C - brown: Live

• D - blue: Neutral

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:


Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow.


Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black.


Connect the wire coloured brown to the terminal either marked with the

“L“ or coloured red.


Check that no cut, or stray strands of wire is present and the cord clamp

( E ) is secure over the outer sheath.

Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.


Switch on the appliance.

The appliance is supplied with a 13 amp fuse ( B ). In the event of having to change the fuse in the plug supplied, a 13 amp

ASTA approved (BS 1362) fuse must be used.


A cut off plug inserted into a

13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

8.4 Ventilation requirements

The airflow behind the appliance must be sufficient.

5 cm min.

200 cm

2 min.

200 cm 2



Refer to the assembly instructions for the installation.



There are some sounds during normal running (compressor, refrigerant circulation).































10.1 Technical data

Dimensions of the recess




Rising time


Frequency mm mm mm










The technical information is situated in the rating plate, on the external or internal side of the appliance and in the energy label.



Recycle the materials with the symbol .

Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic

appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to

ENGLISH 19 your local recycling facility or contact your municipal office.


Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF


Table of contents