AEG | S73400CTS1 | User manual | Aeg S73400CTS1 User Manual

6&76 (1 8VHU0DQXDO
6&7:
2
www.aeg.com
CONTENTS
4
7
8
9
12
13
15
17
21
22
SAFETY INFORMATION
PRODUCT DESCRIPTION
CONTROL PANEL
DAILY USE
HELPFUL HINTS AND TIPS
CARE AND CLEANING
TROUBLESHOOTING
INSTALLATION
TECHNICAL DATA
NOISES
ENVIRONMENT CONCERNS
Recycle the materials with the symbol . Put the packaging in applicable containers to
recycle it.
Help protect the environment and human health and to recycle waste of electrical and
electronic appliances. Do not dispose appliances marked with the symbol with the
household waste. Return the product to your local recycling facility or contact your
municipal office.
VISIT OUR WEBSITE FOR:
- Products
- Brochures
- User manuals
- Trouble shooter
- Service information
www.aeg.com
LEGEND
Warning - Important Safety information.
General information and tips
Environmental information
Subject to change without notice.
(1*/,6+
3
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please spend
a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect, from
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…
Visit the webshop at:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available. The
information can be found on the rating plate.
Model
PNC
Serial Number
4
www.aeg.com
SAFETY INFORMATION
In the interest of your safety and to ensure
the correct use, before installing and first
using the appliance, read this user manual
carefully, including its hints and warnings.
To avoid unnecessary mistakes and accidents, it is important to ensure that all
people using the appliance are thoroughly familiar with its operation and safety
features. Save these instructions and
make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.
For the safety of life and property keep
the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission.
CHILDREN AND VULNERABLE
PEOPLE SAFETY
• This appliance is not intended for use
by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging well away from children. There is risk of suffocation.
• If you are discarding the appliance pull
the plug out of the socket, cut the connection cable (as close to the appliance
as you can) and remove the door to
prevent playing children to suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic
door seals is to replace an older appliance having a spring lock (latch) on the
door or lid, be sure to make that spring
lock unusable before you discard the
old appliance. This will prevent it from
becoming a death trap for a child.
GENERAL SAFETY
WARNING!
Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction.
• The appliance is intended for keeping
foodstuff and/or beverages in a normal
household as explained in this instruction booklet.
• Do not use a mechanical device or any
artificial means to speed up the thawing process.
• Do not use other electrical appliances
(such as ice cream makers) inside of refrigerating appliances, unless they are
approved for this purpose by the manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is
contained within the refrigerant circuit
of the appliance, a natural gas with a
high level of environmental compatibility, which is nevertheless flammable.
During transportation and installation
of the appliance, be certain that none
of the components of the refrigerant
circuit become damaged.
If the refrigerant circuit should become
damaged:
– avoid open flames and sources of ignition
– thoroughly ventilate the room in
which the appliance is situated
• It is dangerous to alter the specifications or modify this product in any way.
Any damage to the cord may cause a
short-circuit, fire and/or electric shock.
WARNING!
Any electrical component (power
cord, plug, compressor) must be
replaced by a certified service
agent or qualified service personnel to avoid hazard.
1.
Power cord must not be lengthened.
2. Make sure that the power plug is
not squashed or damaged by the
back of the appliance. A squashed
or damaged power plug may overheat and cause a fire.
3. Make sure that you can come to
the mains plug of the appliance.
(1*/,6+
Do not pull the mains cable.
If the power plug socket is loose,
do not insert the power plug. There
is a risk of electric shock or fire.
6. You must not operate the appliance without the lamp cover (if
foreseen) of interior lighting.
This appliance is heavy. Care should be
taken when moving it.
Do not remove nor touch items from
the freezer compartment if your hands
are damp/wet, as this could cause skin
abrasions or frost/freezer burns.
Avoid prolonged exposure of the appliance to direct sunlight.
Bulb lamps (if foreseen) used in this appliance are special purpose lamps selected for household appliances use
only. They are not suitable for household room illumination.
4.
5.
•
•
•
•
DAILY USE
• Do not put hot pot on the plastic parts
in the appliance.
• Do not store flammable gas and liquid
in the appliance, because they may explode.
• Do not place food products directly
against the air outlet on the rear wall. (If
the appliance is Frost Free)
• Frozen food must not be re-frozen once
it has been thawed out.
• Store pre-packed frozen food in accordance with the frozen food manufacturer's instructions.
• Appliance's manufacturers storage recommendations should be strictly adhered to. Refer to relevant instructions.
• Do not place carbonated or fizzy drinks
in the freezer compartment as it creates
pressure on the container, which may
cause it to explode, resulting in damage to the appliance.
• Ice lollies can cause frost burns if consumed straight from the appliance.
CARE AND CLEANING
• Before maintenance, switch off the appliance and disconnect the mains plug
from the mains socket.
• Do not clean the appliance with metal
objects.
5
• Do not use sharp objects to remove
frost from the appliance. Use a plastic
scraper.
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is
blocked, water will collect in the bottom of the appliance.
INSTALLATION
For electrical connection carefully
follow the instructions given in
specific paragraphs.
• Unpack the appliance and check if
there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to
the place you bought it. In that case retain packing.
• It is advisable to wait at least four hours
before connecting the appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be
around the appliance, lacking this leads
to overheating. To achieve sufficient
ventilation follow the instructions relevant to installation.
• Wherever possible the back of the
product should be against a wall to
avoid touching or catching warm parts
(compressor, condenser) to prevent
possible burn.
• The appliance must not be located
close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.
• Connect to potable water supply only
(If a water connection is foreseen).
SERVICE
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• Do not remove the LED light cover.
Contact the nearest After Sales Service
Force to replace the LED light board, if
it is necessary.
6
www.aeg.com
• This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used.
ENVIRONMENT PROTECTION
This appliance does not contain
gasses which could damage the
ozone layer, in either its refrigerant circuit or insulation materials.
The appliance shall not be discarded together with the urban refuse and rubbish. The insulation
foam contains flammable gases:
the appliance shall be disposed
according to the applicable regulations to obtain from your local
authorities. Avoid damaging the
cooling unit, especially at the rear
near the heat exchanger. The materials used on this appliance
are remarked by the symbol
cyclable.
(1*/,6+
PRODUCT DESCRIPTION
1
2
3
4
5
6
7
8
16 15 14 13 12
1 Maxibox drawer
2 Freshbox drawer
3 Glass shelf
4 Glass shelf
5 Bottle rack
6 Glass shelf
7 Dynamicair Control
8 Control unit
9 Butter shelf
10 Door shelf
11 Bottle shelf
12 Freezer basket
13 Maxibox basket
14 Frostfree basket
15 Cold module
16 Rating plate
9
10
11
7
8
www.aeg.com
CONTROL PANEL
1
2
5
1 Temperature indicator LED
2 Fast Freeze indicator
3 Door sensor
4 Fast Freeze button
5 Temperature regulator
SWITCHING ON
Insert the plug into the wall socket.
4
3
FAST FREEZE FUNCTION
You can activate the Fast Freeze function
by pressing the Fast Freeze button.
The LED corresponding to the symbol
Fast Freeze indicator lights up.
You can deactivate the Fast Freeze function by pressing the Fast Freeze button
again.
The Fast Freeze indicator will light off.
TEMPERATURE REGULATION
To operate the appliance, proceed as follows:
• touch the temperature regulator button
until the LED corresponding to the required temperature lights up. Selection
is progressive, varying from 2 to 8°C.
At first button touch actual setting LED
keeps blinking.
Any time the button is touch the set
temperature is moved to 1 position .
Corresponding LED will blink for a
while.
Touch the setting button until the required temperature is selected. The set
will be fixed
coldest setting: +2°C
warmest setting: +8°C
A medium setting is generally the
most suitable.
However, the exact setting should be
chosen keeping in mind that the temperature inside the appliance depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• appliance location.
This function stops automatically after 52
hours.
DOOR SENSOR
The appliance is equipped with an optical
sensor to detect door open.
Do not put anything in front of the corresponding window, to maintain proper
functioning.
(1*/,6+
9
DAILY USE
DYNAMICAIR FUNCTION
1
2
The DYNAMICAIR function let food cool
quickly and a more constant temperature
in the refrigerator.
To activate the DYNAMICAIR device push
the switch (1). The green indicator (2)
comes on.
Activate the device when the ambient temperature more than
25°C.
MOVABLE SHELVES
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
BOTTLE RACK
Place the bottles (with the opening facing
front) in the pre-positioned shelf.
If the shelf is positioned horizontally,
place only closed bottles.
This bottle holder shelf can be tilted in order to store previously opened bottles. To
obtain this result, pull the shelf up so it
can rotate upwards and be placed on the
next higher level.
10 www.aeg.com
POSITIONING THE DOOR SHELVES
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
To make these adjustments proceed as
follows:
gradually pull the shelf in the direction of
the arrows until it comes free, then reposition as required.
1
2
3
FRESHBOX DRAWER
The drawer is suitable for storing fresh
food like fish, meat, seafood, because the
temperature is lower here than in the rest
of the fridge
REMOVAL OF FREEZING BASKETS FROM THE FREEZER
2
1
STORAGE OF FROZEN FOOD
When first starting-up or after a period
out of use, before putting the products in
the compartment let the appliance run at
least 2 hours on the higher settings.
The freezing baskets have a limit stop to
prevent their accidental removal or falling
out. At the time of its removal from the
freezer, pull the basket towards yourself
and, upon reaching the end point, remove the basket by tilting its front upwards.
At the time of putting it back, slightly lift
the front of the basket to insert it into the
freezer. Once you are over the end points,
push the baskets back in their position.
In the event of accidental defrosting, for example due to a power
failure, if the power has been off
for longer than the value shown in
the technical characteristics chart
under "rising time", the defrosted
food must be consumed quickly
or cooked immediately and then
re-frozen (after cooling).
(1*/,6+
THAWING
Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature,
depending on the time available for this
operation.
Small pieces may even be cooked still frozen, directly from the freezer: in this case,
cooking will take longer.
11
12 www.aeg.com
HELPFUL HINTS AND TIPS
NORMAL OPERATING
SOUNDS
• You may hear a faint gurgling and a
bubbling sound when the refrigerant is
pumped through the coils or tubing.
This is correct.
• When the compressor is on, the refrigerant is being pumped around and you
will hear a whirring sound and a pulsating noise from the compressor. This is
correct.
• The thermic dilatation might cause a
sudden cracking noise. It is natural, not
dangerous physical phenomenon. This
is correct.
• When the compressor switches on or
switches off, you will hear a faint "click"
of the temperature regulator. This is
correct.
HINTS FOR ENERGY SAVING
• Do not open the door frequently or
leave it open longer than absolutely
necessary.
• If the ambient temperature is high and
the Temperature Regulator is set to low
temperature and the appliance is fully
loaded, the compressor may run continuously, causing frost or ice on the
evaporator. If this happens, set the
Temperature Regulator toward warmer
settings to allow automatic defrosting
and so a saving in electricity consumption.
HINTS FOR FRESH FOOD
REFRIGERATION
To obtain the best performance:
• do not store warm food or evaporating
liquids in the refrigerator
• do cover or wrap the food, particularly
if it has a strong flavour
• position food so that air can circulate
freely around it
HINTS FOR REFRIGERATION
Useful hints:
Meat (all types) : wrap in polythene bags
and place on the glass shelf above the
vegetable drawer.
For safety, store in this way only one or
two days at the most.
Cooked foods, cold dishes, etc..: these
should be covered and may be placed on
any shelf.
Fruit and vegetables: these should be
thoroughly cleaned and placed in the
special drawer(s) provided.
Butter and cheese: these should be
placed in special airtight containers or
wrapped in aluminium foil or polythene
bags to exclude as much air as possible.
Milk bottles: these should have a cap and
should be stored in the bottle rack on the
door.
Bananas, potatoes, onions and garlic, if
not packed, must not be kept in the refrigerator.
(1*/,6+
13
CARE AND CLEANING
CLEANING THE INTERIOR
• rinse and dry thoroughly.
Do not pull, move or damage any
pipes and/or cables inside the
cabinet.
Never use detergents, abrasive
powders, highly perfumed cleaning products or wax polishes to
clean the interior as this will damage the surface and leave a strong
odour.
Before using the appliance for the first
time, wash the interior and all internal accessories with lukewarm water and some
neutral soap so as to remove the typical
smell of a brand-new product, then dry
thoroughly.
Do not use detergents or abrasive
powders, as these will damage
the finish.
CAUTION!
Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.
PERIODIC CLEANING
The equipment has to be cleaned regularly:
• clean the inside and accessories with
lukewarm water and some neutral soap.
• regularly check the door seals and wipe
clean to ensure they are clean and free
from debris.
Clean the condenser (black grill) and the
compressor at the back of the appliance
with a brush. This operation will improve
the performance of the appliance and
save electricity consumption.
Take care of not to damage the
cooling system.
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage
the plastics used in this appliance. For this
reason it is recommended that the outer
casing of this appliance is only cleaned
with warm water with a little washing-up
liquid added.
After cleaning, reconnect the equipment
to the mains supply.
DEFROSTING THE REFRIGERATOR
Frost is automatically eliminated from the
evaporator of the refrigerator compartment every time the motor compressor
stops, during normal use. The defrost water drains out through a drain hole into a
special container at the back of the appliance, over the motor compressor, where
it evaporates.
It is important to periodically clean the
defrost water drain hole in the middle of
the refrigerator compartment channel to
prevent the water overflowing and dripping onto the food inside.
Use the special cleaner provided, which
you will find already inserted into the
drain hole.
14 www.aeg.com
DEFROSTING OF THE
FREEZER
The freezer compartment of this model,
on the other hand, is a "no frost" type.
This means that there is no buildup of
frost when it is in operation, neither on
the internal walls nor on the foods.
The absence of frost is due to the continuous circulation of cold air inside the
compartment, driven by an automatically
controlled fan.
(1*/,6+
15
TROUBLESHOOTING
CAUTION!
Before troubleshooting, disconnect the power supply.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.
There are some sounds during
normal use (compressor, refrigerant circulation).
Problem
Possible cause
The appliance is
noisy.
The appliance is not instal- Check if the appliance
led properly.
stands stable (all the feet
should be on the floor).
Solution
The appliance does
not operate.
The plug is not connected
to the mains socket correctly.
Connect the plug to the
mains socket correctly.
The appliance has no
Connect a different electripower. There is no voltage cal appliance to the mains
in the mains socket.
socket.
Contact a qualified electrician.
The light device does The light device is in
not work.
stand-by.
The unit is defective.
The compressor operates continually.
Close and open the door.
Refer to "Replacing the
control unit".
The temperature is not set Set a higher temperature.
correctly.
The door is not closed cor- Refer to "Closing the
rectly.
door".
The door has been
opened too frequently.
Do not keep the door open
longer than necessary.
The food temperature is
too high.
Let the food temperature
decrease to room temperature before storage.
The room temperature is
too high.
Decrease the room temperature.
Water flows on the
rear plate of the refrigerator.
During the automatic defrosting process, frost defrosts on the rear plate.
This is correct.
Water flows into the
refrigerator.
The water outlet is clogged.
Clean the water outlet.
Products prevent that water flows into the water
collector.
Make sure that products do
not touch the rear plate.
16 www.aeg.com
Problem
Possible cause
Solution
Water flows on the
ground.
The melting water outlet
does not flow in the evaporative tray above the
compressor.
Attach the melting water
outlet to the evaporative
tray.
The temperature in
the appliance is too
low/high.
The temperature regulator Set a higher/lower temperis not set correctly.
ature.
If your appliance is still not working properly after making the above checks, contact the After Sales Centre. You can find
the list at the end of this manual.
REPLACING THE CONTROL
UNIT
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the control unit. Contact your Service Center.
CLOSING THE DOOR
1.
2.
Clean the door gaskets.
If necessary, replace the defective
door gaskets. Contact the After Sales
Service.
(1*/,6+
INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and correct operation of the appliance
before installing the appliance.
POSITIONING
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Climate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
17
18 www.aeg.com
ELECTRICAL CONNECTION
A
B
CAUTION!
Any electrical work required to install this appliance should be carried out by a qualified electrician
or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
E
C
D
The wires in the mains lead are
coloured in accordance with the
following code:
A-Green and Yellow: Earth
C- Brown: Live
E- Blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either
with the letter “E“ or by the earth
or coloured green and yelsymbol
low.
2. Connect the wire coloured blue to
the terminal either marked with the
letter “N“ or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
“L“ or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp D
is secure over the outer sheath.
5. Make sure the electricity supply voltage is the same as that indicated on
the appliance rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp
plug fitted B. In the event of having to
change the fuse in the plug supplied, a 13
amp ASTA approved (BS 1362) fuse must
be used.
WARNING!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that it is
disposed of safely.
(1*/,6+
19
LOCATION
100 mm
min
The appliance should be installed well
away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure
that air can circulate freely around the
back of the cabinet. To ensure best performance, if the appliance is positioned
below an overhanging wall unit, the minimum distance between the top of the
cabinet and the wall unit must be at least
100 mm . Ideally, however, the appliance
should not be positioned below overhanging wall units. Accurate levelling is
ensured by one or more adjustable feet at
the base of the cabinet.
B
20 mm
A
WARNING!
It must be possible to disconnect
the appliance from the mains
power supply; the plug must
therefore be easily accessible after installation.
REAR SPACERS
2
1
4
3
You can find the two spacers in the bag
with documentation.
Do these steps to install the spacers:
1. Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
LEVELLING
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
20 www.aeg.com
DOOR REVERSIBILITY
A
E
WARNING!
Before carrying out any operations, remove the plug from the
power socket.
B
To carry out the following operations, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the operations.
F
C
D
• Remove the spacer (A) and move to the
other side of the hinge pivot (B).
• Remove the doors.
• Remove the left-hand cover pin of the
middle hinge (C,D) and move to the
other side.
• Fit the pin of the middle hinge (B) into
the left-hand hole of the lower door.
• Remove using a tool the cover (A). Unscrew the lower hinge pivot (B) and the
spacer (C) and place them on the opposite side.
A
B
C
1
• Re-insert the cover (1) on the opposite
side.
(1*/,6+
21
• Remove the plugs on the upper side of
both doors and move them to the other
side
• Re-insert the lower door on the lower
hinge pivot .
• Insert the middle hinge into the left drill
of the lower door.
• Unscrew the upper hinge pivot and
place it on the opposite side.
• Fit the upper door on the upper door
pivot.
• Re-insert the upper door on the middle
hinge pivot slightly tilting both doors.
• Re-screw the middle hinge . Do not forget the plastic spacer .
2
1
B
C
A
• Remove the covers (B). Remove the
cover pins (A).
• Unscrew the handles (C) and fix them
on the opposite side.
• Re-insert the cover pins (A) on the opposite side.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After Sales Service specialist will carry out
the reversibility of the doors at your cost.
TECHNICAL DATA
Dimension of the recess
Height
1850 mm
Width
595 mm
Depth
658 mm
Rising Time
18 h
Voltage
230 - 240 V
Frequency
50 Hz
The technical information are situated in
the rating plate on the internal left side of
the appliance and in the energy label.
22 www.aeg.com
NOISES
There are some sounds during normal
running (compressor, refrigerant circulation).
SSS
RRR
!
HISSS!
OK
BRRR!
!
BB
U
BL
CLICK!
BRRR!
BLUBB!
!
ICK
CL
CR
AC
K!
CLICK!
BRRR!
BLUBB!
(1*/,6+
HISSS!
SSSRRR!
CRACK!
HISSS!
SSSRRR!
CRACK!
23
-A-
www.aeg.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising