Zanussi | ZDB1500U | User manual | ZANUSSI ZDB1500U User Manual

Ste am iron
O pe rating
ins tructions
822 9 49 462 - 01 - 822 9 49 462 - 01 - 0109
Ope rating ins tructions
Z DB1500U
Z DB1550U
Englis h
D
E
F
DEAR CUSTOM ER
G H J
L
C
M
B
P
A
N
1
a
b
c
• Th e appliance m ay only be ope rate d us ing th e voltage and
curre ntrating indicate d on th e rating plate (Figure 1/A).
• Th e appliance s h ould only be plugge d into a s ock e tins talled
according to re gulations .
• Th is appliance is notinte nde d for us e by pe rs ons (including
ch ildre n) w ith re duce d ph ys ical,s e ns ory or m e ntal
capabilitie s or lack ofe xpe rie nce and k now ledge unles s th e y
h ave be e n give n initials upe rvis ion or ins truction conce rning
us e ofth e appliance by a pe rs on re s pons ible for th e ir s afe ty.
FEATURES (FIGURE 1)
K
O
SAFETY INSTRUCTIONS
Pleas e re ad th e s e ope rating ins tructions care fully. Above all
pleas e obs e rve th e s afe ty ins tructions on th e initialpage s ofth e s e
ope rating ins tructions ! Pleas e k e e p th e s e ope rating ins tructions
for future re fe re nce . Pas s th e m on to any s ubs e q ue ntow ne r ofth e
appliance .
A
Rating plate
B
Stainles s s te e ls oleplate
C
Ste am e xith oles
D
Spray nozzle
E
Filling ape rture
F
Ste am s e lector
G
Je tbutton
H
Spray function button
J
Pow e r indicator
K
M ains cord
L
H eel
M
Cord s torage
N
Te m pe rature s e lector
• Th e iron m us tnotbe leftunatte nde d w h ile itis conne cte d to
th e s upply m ains .
O
Trans pare ntw ate r re s e rvoir
• Ne ve r im m e rs e th e s te am iron in w ate r!
P
M e as uring be ak e r
• Alw ays s tand th e s te am iron on its h e e l.W h e n placing th e
iron on its s tand, e ns ure th atth e s urface on w h ich th e s tand
is place d is s table.
“Cold” s e tting
b
Synth e tics
c
Silk/w ool
d
Cotton/line n
• D o notleave th e appliance alone w h e n s w itch e d on. Eve n
w h e n leaving th e room for a s h ortpe riod re m ove th e plug.
Ke e p ch ildre n aw ay from th e appliance .
C
4
5
6/A
6/B
7
8
• Ch ildre n s h ould be s upe rvis e d to e ns ure th atth e y do not
play w ith th e appliance .
W h e n s te am ironing, s te am is e m itte d from th e h oles in th e
s oleplate – w h e re ifcare is nottak e n, th e re is a ris k ofburns !
• Alw ays re m ove th e m ains plug be fore cleaning th e s te am
iron, filling w ith w ate r or e m ptying.
• Th e iron m us tbe us e d and re s te d on a s table s urface .
• D o nottw is tor be nd th e m ains cord or w rap itround th e
s te am iron w h ile itis s tillh ot. Only s tore th e appliance once
itis cooland afte r e m ptying any re m aining w ate r.
• Th e iron is notto be us e d ifith as be e n droppe d, ifth e re are
vis ible s igns ofdam age or ifitis leak ing.
d
2
B
• Caution! W h e n in us e , th e s oleplate and cove r ofth e s te am
iron re ach h igh ope rating te m pe rature s !
TEM PERATURE SELECTOR (FIGURE 2)
a
A
3
1
English
•
Please check the mains cord from time to time for damage!
Special tools are required to repair a damaged mains cord. If
the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
Repairs to this appliance may only be carried out by
qualified service engineers. Considerable danger
may result from improper repairs. If repairs become
necessary, please contact the Customer Care
Department or your authorised dealer.
STEAM IRONING
Filling the Steam Iron (Figure 3)
The water reservoir should only be filled when the plug has
been removed from the socket.
0 Set the steam selector to position "○" = dry iron (Figure 4/A)
and hold the appliance upright.
0 Fill the water reservoir at most to the “MAX” mark. To do this,
you can use the measuring beaker supplied (Figure 1/P).
USING FOR THE FIRST TIME
Water Quality
You can use tap water up to 3 mmol/I 17° dH water hardness
level. Your local Water Authority can advise you on the
hardness of the water in your area. If the water from your tap is
harder than the above, please use distilled water available from
a chemist or a 50:50 mixture of tap water and distilled water.
Setting the Temperature (Figure 2)
Please note the internationally applicable care symbols on
garment labels.
On good quality garments they will indicate the correct ironing
temperatures.
The ironing table indicates which temperature is most
appropriate for a particular type of fabric. We recommend
sorting the washing first. Start with materials that require low
temperature ironing (e.g. PERLON). Follow on by ironing
materials that require progressively higher temperatures. In
this way you avoid damaging sensitive fabrics by using too
high a temperature. When switched on, the power indicator
lamp lights up (Figure 1/J); it goes out when the temperature
set has been reached.
However, if the temperature selector (Figure 1/N) is turned
back, please note that it takes a while for the soleplate to cool
down. Only when the power indicator light comes on again
has the soleplate reached the cooler temperature.
When using for the first time, please note:
0 Fill the reservoir with water; set the steam selector (Figure 1/F)
to maximum position (Figure 4/B).
0 Heat the appliance and place it with the soleplate facing
downwards on an iron rest or plate (Figure 5) to allow the
water to steam through and activate the steam chamber.
1 You will obtain optimal steaming results and the noise
produced by the steaming will be steadier after the water
reservoir has been filled and drained three times.
Ironing with Steam
To steam iron, set the temperature selector (Figure 1/N) to the
required fabric type and wait until the power indicator (Figure
1/J) goes out - only then set the steam selector (Figure 1/F) to
the desired position (Figure 4/B). You will find which
temperature setting (fabric type) matches which steam setting
in the ironing table. As soon as the steam iron is held
horizontally steam begins to form. When the steam iron is set
upright again the steam supply stops automatically.
DRY IRONING
0 Set the steam selector (Figure 1/F) to position "○" (Figure
4/A).
0 Turn the temperature selector (Figure 1/N) to the desired
temperature.
2
English
STORAGE
Spray Function (Figure 6/A)
The first time you use the appliance, or if you have not used it
for a long time, you will need to press the spray function
button (Figure 1/H) several times before water comes out of
the spray nozzle (Figure 1/D). You can also use the spray
function when dry ironing.
Remove the plug from the socket!
Set the temperature selector (Figure 1/N)
to the “Cold” position 0 (Figure 2/a) and
the steam selector (Figure 1/F) to position "○" (Figure
„0“4/A).
Super Steam Jet Function (Figure 6/B)
Empty out remaining water (Figure 7).
Store the appliance standing upright.
The super steam jet function is of valuable assistance when
ironing, for example, creases, embroidery etc. You can trigger
the additional steam jet both when steam ironing and when dry
ironing.
Once the iron has cooled down, to store properly, wrap the
mains cord around the cord storage (Figures 1/M and 8).
0 Set the temperature selector (Figure 1/N) to the “MAX”
position and wait until the correct temperature has been
reached, i.e., until the power indicator (Figure 1/J) goes out.
0 Raise the steam iron a little away from the material and press
the steam jet button
(Figure 1/G).
Always wait another 5 seconds before pressing the steam jet
button again.
CARE AND MAINTENANCE
The steam iron has an automatic decalcification feature, which
significant slows down the deposit of limescale in the steam
chamber.
2 The steam iron must not be descaled! Neither vinegar nor
proprietary brands of descaler must be filled into the water
reservoir!
CLEANING
STEAMING HANGING ITEMS OF CLOTHING
0 Turn the temperature selector (Figure 1/N) to the “MAX”
position and wait until the power indicator (Figure 1/J) goes
out.
0 Hang the article concerned on a hanger and hold the steam
iron at a distance of 10 – 20 cm from the material.
0 Now press the steam jet button (Figure 1/G). Wait at least 5
seconds before pressing the button again.
2 Warning: Do not attempt to freshen up clothing whilst it is
still being worn.
Risk of burning!
Drip Stop
The steam iron has an automatic drip stop function. The drip
stop immediately interrupts the creation of steam if the
temperature selected is too low.
As a precaution we recommend cleaning every three months.
0 Unplug from the mains.
0 Set the steam selector (Figure 1/F) to position "○" (Figure
4/A).
0 Fill the water reservoir (Figure 1/O) with clear water to the
“MAX” mark.
0 Set the temperature selector (Figure 1/N) to “MAX”.
0 Insert the plug into the socket.
0 Wait until the power indicator (Figure 1/J) goes out.
0 Set the steam selector (Figure 1/F) to position 5 (Figure 4/
C).
0 Place the appliance horizontally over a sink.
0 Press the steam selector (Figure 1/F) for at least 1 minute.
0 Water is flowing out of the steam exit holes. Your steam iron is
now ready for use again.
3
English
WHAT TO DO, IF …
•
no “steam” appears when using on a steam setting?
DISPOSAL
3 Packaging material
– In warm, dry air (e.g. when the heating is on during the
winter), reduced amounts of vapour are normal because it is
absorbed by the dry air before condensing.
– Emptying the filled water reservoir can wash out fluff.
Remove the mains cord and tip the filled appliance forwards at
an angle (Figure 7) so that the water can run out of the filling
aperture.
•
The packaging materials are environmentally friendly and can
be recycled.
The plastic components are identified by markings, e.g. >PE<,
>PS<, etc.
Please dispose of the packaging materials in the appropriate
container at the community waste disposal facilities.
3 Old appliance
drops of water are coming out of the steam exit holes?
The symbol R on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product, please
contact your local city office, your household waste disposal
service or the shop where you purchased the product.
– Do not set the steam selector to another position than „0“
until the temperature for steam ironing has been reached. If the
temperature has been set too low for steam ironing increase
the setting.
•
stains appear on the washing whilst ironing
– Clean the steam iron. Rub the soleplate while still warm with
a mixture of water and vinegar or with a non-abrasive cleaning
agent.
– When dry ironing fluff can enter the steam chambers and
carbonise. This can lead to stains as the water passes through.
Therefore also clean the inside of the water reservoir. Fill it
with water and gently shake the steam iron. Then pour the
water out.
•
the soleplate is rough or furred?
– The iron temperature was set too high.
– Select the correct ironing temperature for the fabric (see
ironing table).
TECHNICAL DATA
Power consumption: 1600W - 2000W (ZDB1500U)
1600W - 2100W (ZDB1550U)
Mains voltage: 220 - 240 V
4
English
Ironing table - Recommendations for use
Fabric
Temperature
Selector
Steam
Selector
Comments
Synthetics
Acrylan, Dralon, Lycra, Orlon, Vonnel
Polyacrilic
Steam off
"○ "
Polyamide
Polyester
Enkalon, Grilon, Nylon, Perlon, Rilsan
Dacron, Diolen, Kodel, Trevira, Vestan
Steam off
"○ "
Cellulose
Cellulose fibres, acetate, cupro, viscose such as:
Cuprama, Colvera, Phyron, Rayon, Tricell
Natural fibres
Steam off
Silk
"○ "
Silk, wool and synthetic fibres can be dry-ironed by
covering with a damp cloth and ironing over the cloth
Woollens
Steam on
Steam ironing can be used in the low to medium setting
of the steam selector .
Cotton
Steam on
Constant steam possible from ••• position
Linen
Steam on
Super steam jet from ••• position for stubborn
creases
Setting when
not in use
0 = Cold
Steam off
"○ "
Remove plug
For mixed fibres we recommend ironing at the lower temperature (that of the more sensitive fibre), e.g., polyester-cotton at the polyester
setting.
Varied ironing speeds and fabric dampness can mean that the optimal setting can differ from that recommended in the table!
822 949 4 62 - 01 - 0109
5
6
7
8
9
Download PDF

advertising