Progress | PES6060E | User manual | Progress PES6060E User Manual

user manual
Ceramic glass hob
2 progress
Safety Information
Description of the Appliance
Operating the hob
Tips on Cooking and Frying
Cleaning and Care
What to do if ...
Installation Instructions
Subject to change without notice
Safety Information
Warning! Please comply with these
instructions. If you do not, any damage
resulting is not covered by the warranty.
Correct use
• This appliance is not intended for use by
children or other persons whose physical,
sensory or mental capabilities or lack of
experience and knowledge prevents them
from using the appliance safely without supervision or instruction by a responsible
person to ensure that they can use the appliance safely.
• Do not leave the appliance unattended
during operation.
• This appliance should be used only for
normal domestic cooking and frying of
• The appliance must not be used as a work
surface or as a storage surface.
• Additions or modifications to the appliance
are not permitted.
• Do not place or store flammable liquids,
highly inflammable materials or fusible objects (e.g. plastic film, plastic, aluminium)
on or near the appliance.
Children’s safety
• Small children must be kept away from the
• Only let bigger children work on the appliance under supervision.
General safety
• The appliance may only be installed and
connected by trained, registered service
• Built-in appliances may only be used after
they have built in to suitable built-in units
and work surfaces that meet standards.
• In the event of faults with the appliance or
damage to the glass ceramic (cracks,
scratches or splits), the appliance must be
switched off and disconnected from the
electrical supply, to prevent the possibility
of an electric shock.
• Repairs to the appliance must only be carried out by trained registered service engineers.
Safety during use
• Remove stickers and film from the glass
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not
touch the hot surface of the appliance or
hot cookware.
• Overheated fats and oils can ignite very
quickly. Warning! Fire hazard!
• Switch the cooking zones off after each
• Risk of burns! Do not place objects made
of metal, such as knives, forks, spoons
and saucepan lids on the cooking surface,
as they can get hot.
Safety when cleaning
• For cleaning, the appliance must be
switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or high-pressure
cleaning equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by
objects falling onto it.
• The edge of the glass ceramic can be
damaged by being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
scratch the glass ceramic if pushed across
the surface.
• Objects that melt and things that boil over
can burn onto the glass ceramic and
should be removed straightaway.
progress 3
• Do not use the cooking zones with empty
cookware or without cookware.
• To avoid damaging cookware and glass
ceramics, do not allow saucepans or frying
pans to boil dry.
Description of the Appliance
265/170 mm
Single cooking zone 1200W
Multi-purpose zone 1500/2400W
Single cooking zone 1800W
Residual heat indicator
Double ring cooking zone 750/2200W
Residual heat indicator
The residual heat indicator lights up, as soon
as the corresponding cooking zone is hot.
Warning! Risk of burns from residual
heat. After being switched off, the
cooking zones need some time to cool
down. Look at the residual heat
Residual heat can be used for melting
and keeping food warm.
Operating the hob
You operate the appliance with the combination appliance’s ring switches. The
operation and the function of the ring
switches is described in the Operating
Instructions for the combination appliance.
Switching the outer rings on and off is
also described there.
When a cooking zone is switched on, it
may hum briefly. This is a characteristic
of all ceramic glass cooking zones and
does not impair either the function or the
life of the appliance.
Tips on Cooking and Frying
Information on acrylamides
According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can
constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures
and not browning foods too much.
• You can recognise good cookware from
the bottoms of the pans. The bottom
should be as thick and flat as possible.
• Cookware made of enamelled steel or with
aluminium or copper bottoms can leave
discolorations on the glass ceramic surface which are difficult or impossible to remove.
4 progress
Always place cookware on the cooking
zone before it is switched on.
Energy saving
If possible, always place lids on the
Switch cooking zones off before the end
of the cooking time, to take advantage
of residual heat.
Bottom of pans and cooking zones
should be the same size.
Cleaning and Care
Warning! Risk of burns from residual
Warning! Sharp objects and abrasive
cleaning materials will damage the
appliance. Clean with water and
washing up liquid.
Warning! Residues from cleaning
agents will damage the appliance.
Remove residues with water and
washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place a scraper on the glass ceramic surface at an angle.
2. Remove residues by sliding the blade
over the surface.
3. Wipe the appliance with a damp cloth
and a little washing up liquid.
4. Rub the appliance dry using a clean cloth.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth
and a little washing up liquid.
Type of dirt
when the appliance
has cooled down
sugar, food containing
a scraper *
plastics, tin foil
a scraper *
limescale and water
cleaner for glass ceramic
or stainless steel *
fat splashes
cleaner for glass ceramic
or stainless steel *
shiny metallic discoloration
cleaner for glass ceramic
or stainless steel *
progress 5
* Scrapers and cleaners for glass ceramic
and stainless steel can be purchased in specialist shops
Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
Scratches or dark stains on the glass
ceramic that cannot be removed do not
however affect the functioning of the appliance.
What to do if ...
The cooking zones are not functioning.
Possible cause
The desired heat setting is not
Set the heat setting.
The fuse in the house’s electrical Check the fuse. If the fuses trip
wiring (fuse box) has been trip- a number of times, please call an
authorised electrician.
The residual heat indicator is not
displaying anything
The cooking zone was only on
for a short time and is therefore
not hot
If you are unable to remedy the problem
by following the above suggestions,
please contact your dealer or the Customer Care Department.
Warning! Repairs to the appliance are
only to be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.
If the cooking zone is supposed
to be hot, call the Customer
Service Department.
If the appliance has been wrongly operated, the visit from the customer service
technician or dealer may not take place
free of charge, even during the warranty
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Installation Instructions
Safety instructions
Warning! This must be read!
The laws, ordinances, directives and standards in force in the country of use are to be
followed (safety regulations, proper recycling
in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to
other appliances and units are to be observed. Anti-shock protection must be provided by the installation, for example drawers
may only be installed with a protective floor
directly underneath the appliance. The cut
surfaces of the worktop are to be protected
against moisture using a suitable sealant.
The sealant seals the appliance to the work
top with no gap. When building in, protect the
underside of the appliance from steam and
moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors
and under windows. Otherwise hot cookware may be knocked off the rings when
doors and windows are opened.
6 progress
Warning! Risk of injury from electrical
• The electrical mains terminal is live.
• Make electrical mains terminal free of
• Follow connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection by installing correctly.
• The appliance must be connected to
the electrical supply by a qualified
Warning! Risk of injury from electrical
• Loose and inappropriate plug and
socket connections can make the terminal overheat.
• Have the clamping connections correctly installed by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or twophase connection, the appropriate
mains cable of type H05BB-F Tmax
90°C (or higher) must be used.
• If this appliance’s mains cable is damaged, it must be replaced by a special
cable (type H05BB-F Tmax 90°C; or
higher). The latter is available from the
Customer Care Department
A device must be provided in the electrical
installation which allows the appliance to be
disconnected from the mains at all poles with
a contact opening width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are
to be removed from the holder), earth leakage trips and contractors.
min. 500mm
progress 7
PES 6060 E
949 592 997
230 V
50 Hz
7,6 kW
In the event of technical faults, please first
check whether you can remedy the problem
yourself with the help of the operating instructions (section “What to do if…”).
If you were not able to remedy the problem
yourself, please contact the Customer Care
Department or one of our service partners.
In order to be able to assist you quickly, we
require the following information:
8 progress
– Model description
– Product number (PNC)
– Serial number
(S No. - see rating plate)
– Type of fault
– Any error messages displayed by
the appliance
– three digit letter-number combination
for glass ceramic
progress 9
10 progress
progress 11
Download PDF