Aeg-Electrolux HC652600EB User Manual

Add to my manuals
24 Pages

advertisement

Aeg-Electrolux HC652600EB User Manual | Manualzz
EN
User Manual
Teppan yaki grill plate
HC652600EB
2
www.aeg.com
CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2. CONDITIONS OF USE....................................................................................................4
3. SAFETY INSTRUCTIONS................................................................................................ 4
4. PRODUCT DESCRIPTION.............................................................................................. 6
5. DAILY USE........................................................................................................................8
6. HINTS AND TIPS........................................................................................................... 11
7. CARE AND CLEANING................................................................................................ 14
8. TROUBLESHOOTING...................................................................................................14
9. INSTALLATION............................................................................................................. 16
10. TECHNICAL INFORMATION.....................................................................................19
11. WARRANTY ................................................................................................................ 20
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler
features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.registeraeg.com
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always
keep the instructions with the appliance for future
reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
If the appliance has a child safety device, we
recommend you activate it.
Cleaning and user maintenance shall not be made by
children without supervision.
Children of less than 3 years should be kept away
unless continuously supervised.
1.2 General Safety
•
•
•
•
The appliance and its accessible parts become hot
during use. Do not touch the heating elements.
Do not operate the appliance by means of an external
timer or separate remote-control system.
Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
Never try to extinguish a fire with water, but switch off
the appliance and then cover flame e.g. with a lid or a
fire blanket.
4
www.aeg.com
•
•
•
•
•
•
Do not store items on the cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control
and do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance to avoid the possibility of
electric shock.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
2. CONDITIONS OF USE
This appliance is intended to be used in
household and similar applications such
as:
• By clients in serviced apartments,
holiday apartments and other
residential type environments.
• Farm houses
3. SAFETY INSTRUCTIONS
3.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Obey the installation instruction
supplied with the appliance.
• Keep the minimum distance from the
other appliances and units.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware to fall from the
appliance when the door or the
window is opened.
• If the appliance is installed above
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
• The bottom of the appliance can get
hot. Make sure to install a noncombustile separation panel under
the appliance to prevent access to the
bottom.
• Make sure that the ventilation space
of 2 mm, between the worktop and
the front of the below unit, is free.
The warranty does not cover damages
caused by the lack of an adequate
ventilation space.
3.2 Electrical Connection
WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
ENGLISH
• Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
• Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains
cable.
• Do not let the electricity mains cable
tangle.
• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the
cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
5
3.3 Use
WARNING!
Risk of injury, burns and
electrical shock.
• Remove all the packaging, labelling
and protective film (if applicable)
before first use.
• Use this appliance in a household
environment.
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
• Do not let the appliance stay
unattended during operation.
• Set the cooking zone to “off” after
each use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
• Do not operate the appliance with
wet hands or when it has contact with
water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it
may splash.
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
6
www.aeg.com
WARNING!
Risk of damage to the
appliance.
• Do not keep hot cookware on the
control panel.
• Do not let cookware to boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones
with empty cookware or without
cookware.
• Do not put aluminium foil on the
appliance.
• Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
3.4 Care and cleaning
• Clean regularly the appliance to
prevent the deterioration of the
surface material.
• Deactivate the appliance and let it
cool down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal
objects.
3.5 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
3.6 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
4. PRODUCT DESCRIPTION
4.1 The most important
features of your hob
• The cooking surface has 2 layers of
stainless steel with a layer of
aluminium between them. It has a
high thermal capacity, which prevents
temperatures from quickly decreasing
(e.g. when you prepare meat directly
from the refrigerator).
• Each Teppan Yaki grill surface is
unique because they are made by
hand and grounded by grinding
specialists. Differences in the grinding
pattern are normal and do not cause
problems in how the hob operates.
The more you use your grill, the more
valuable it looks.
• The groove around the edge:
– Decreases the temperature of the
installation surfaces, which lets
you install the cooking surface
into different types of kitchen
worktops.
– Absorbs some of the expansion of
the heated cooking surface
through its indentation.
– Collects small food remnants and
liquids which you can easily
remove after cooking.
• The necessary temperature can be
kept constant by the thermostat with
a readable temperature setting. This
prevents overheating of the food and
permits low-fat cooking that keeps
the nutritional values of the food.
• The food is heated directly on the
cooking surface, with or without oil.
There is also the option of cooking
with pots or pans.
• The grill surface heats to a
temperature of 180 °C in
approximately 4 minutes. The
ENGLISH
temperature of the grill surface
decreases from 180 °C to 100 °C in
approximately 25 minutes, and to 60
°C in approximately 60 minutes.
7
• Always preheat the cooking surface
before cooking.
4.2 Cooking surface layout
1 Roasting zone
2 Glass bar
3 Control panel
1
1
2
3
4.3 Control panel layout
1 2
3
4
12
5
6
11
7
10
8
9
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
Sensor Function
field
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Lock / The Child Safety
Device
To lock / unlock the control panel.
3
Cleaning
To activate and deactivate the function.
-
Temperature display
To show the temperature.
-
Timer indicators of roasting zones
To show for which zone you set the time.
-
Timer display
To show the time in minutes.
4
5
6
8
www.aeg.com
Sensor Function
field
Comment
7
CountUp Timer
To show that the function operates.
8
Count Down Timer / Minute Minder
To show that the function operates.
9
-
To select the Timer function.
10
-
To select the roasting zone.
-
To increase or decrease the time.
Control bar
To set the temperature.
/
11
12
-
4.4 Heat setting displays
Display
Description
The roasting zone is deactivated.
The roasting zone operates.
+ digit
There is a malfunction.
/
OptiHeat Control (3 step Residual heat indicator) : continue cooking / keep warm / residual heat.
/
Lock / The Child Safety Device function operates.
Automatic Switch Off function operates.
4.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/
/
There is a risk of
burns from residual heat.
The indicator shows the level
of the residual heat.
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and
deactivating
Touch
for 1 second to activate or
deactivate the hob.
ENGLISH
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• All roasting zones are deactivated.
• You do not set the temperature after
you activate the hob.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• You do not deactivate a roasting zone
or change the temperature. After 90
minutes
comes on and the hob
deactivates. Before next use, set the
roasting zone to
.
5.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
The display flashes until the roasting
zone reaches the temperature. Then a
signal sounds and the display shows the
temperature.
9
To set the roasting zone: touch
again and again until the indicator of a
necessary roasting zone comes on. When
this function is active,
comes on.
To activate the function: touch
of
the timer to set the time (00 - 99
minutes). When the indicator of the
roasting zone starts to flash slowly the
time counts down.
To see the remaining time: set the
. The indicator of
roasting zone with
the roasting zone starts to flash quickly.
The display shows the remaining time.
To change the time: set the roasting
zone with
. Touch
or
.
To deactivate the function: set the
and touch .
roasting zone with
The remaining time counts back to 00.
The indicator of the roasting zone goes
out.
When the time comes to an
end, the sound operates and
00 flashes. The roasting
zone deactivates.
To stop the sound: touch
.
CountUp Timer (The count up
timer)
You can use this function to monitor how
long the roasting zone operates.
To set the roasting zone (if more than
1 roasting zone operates): touch
again and again until the indicator of a
necessary roasting zone comes on. When
this function is active,
comes on.
5.4 Timer
To activate the function: touch
Count Down Timer
You can use this function to set how long
the roasting zone should operate for a
single cooking session.
symbol
First set the roasting zone then set the
function. The selection of the Timer
function is possible for roasting zones
that are active and after the temperature
is set.
goes out and
. The
comes on.
To see how long the roasting zone
.
operates: set the roasting zone with
The indicator of the roasting zone starts
to flash quickly. The display shows how
long the zone operates. During the first
minute the display shows the time in
seconds. After the first minute the
display shows the time in minutes.
10
www.aeg.com
To activate the function: activate the
To deactivate the function: set the
roasting zone with
The symbol
on.
and touch
goes out and
.
comes
Touch
. Do not set the heat setting.
for 4 seconds.
Deactivate the hob with
To reset the function: touch
time counts back to 00.
. The
Touch
. Do not set the heat setting.
comes on.
.
To override the function for only one
).
To activate the function: touch
for 4 seconds.
Deactivate the hob with
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the roasting zones do not operate (the
temperature display shows
comes on.
.
To deactivate the function: activate the
hob with
If two functions operate at
the same time, the display
shows the CountUp Timer
function first.
.
Touch
or
of the timer to set the
time. When the time comes to an end,
the sound operates and 00 flashes.
To stop the sound: touch
hob with
.
The function has no effect
on the operation of the
roasting zones.
5.5 Lock
cooking time: activate the hob with
deactivate the hob with
operates again.
the function
5.7 OffSound Control
(Deactivating and activating
the sounds)
Deactivate the hob. Touch
for 3
seconds. The display comes on and goes
out. Touch
for 3 seconds.
or
comes on. Touch
of the timer to
choose one of the following:
•
- the sounds are off
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
•
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
Set the heat setting first.
When the function is set to
hear the sounds only when:
To activate the function: touch .
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch .
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.6 The Child Safety Device
This function prevents an accidental
operation of the hob.
.
comes on. Touch
for 4 seconds.
Set the heat setting in 10 seconds. You
can operate the hob. When you
•
•
•
•
you can
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control
panel.
ENGLISH
11
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
The manufacturer does not recommend
that you boil large quantities of water on
the roasting surface (e.g. for spaghetti).
6.1 Öko Timer (Eco Timer)
To save energy, the heater of the
roasting zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
temperature setting and the length of
the roasting.
6.2 Preparing food with the
Teppan Yaki
You prepare the food directly on the
roasting surface, with or without oil. You
can also use pots or pans, but the
cookware does not heat up as quickly as
it does on a glass-ceramic hob or a gas
hob.
You can cook or keep warm side dishes
or sauces in pots or pans. Put them
directly on the cooking surface.
The noises are normal and
do not refer to hob
malfunction.
Do not put cookware in the middle of
the cooking surface between the zones,
as the unevenness can make them
unsteady. Frying on the surface, where
the zones touch, can cause in uneven
browning (e. g. with pancakes).
6.3 Examples of cooking
applications
Using fats and oils
When the temperature is too high, the
fat begins to produce smoke. This
temperature is called the smoke point.
Fats / Oils
Max. temperature (°C)
Smoke point (°C)
Butter
130
150
Pork fat
170
200
Beef fat
180
210
Olive oil
180
200
Sunflower oil
200
220
Groundnut oil
200
235
Coconut oil
200
240
Always preheat the hob.
Food to be cooked
Temperature (°C)
Time / Tips
Fish and shellfish
140 – 160
Preheat the hob.
Salmon fillets
160
8 minutes, turn after 4 minutes.
12
www.aeg.com
Food to be cooked
Temperature (°C)
Time / Tips
King prawns (without shell)
140
6 minutes, turn after 3 minutes.
Shark steaks, approximately
2.5 cm thick
160
10 minutes, turn after 5 minutes.
Sole, Müllerin Art (fried in
butter)
140
8 minutes, turn after 4 minutes, light side first.
Plaice filets
140
6 minutes, turn after 3 minutes.
Veal
140 – 180
Preheat the hob.
Veal chop
180
10 minutes, turn after 5 minutes.
Veal medallions, 4 cm thick
160
10 minutes, turn after 5 minutes.
Veal steaks, 3 - 4 cm thick
160
6 minutes, turn after 3 minutes.
Veal escalopes, natural
180
5 minutes, turn after 2,5 minutes.
Veal fricasee in cream sauce
180
6 minutes, turn after 3 minutes. The meat strips must
not be stuck to each other.
Beef
160 – 180
Preheat the hob.
Beef steak blau, very raw
180
2 minutes, turn after 1 minute.
Beef steak blutig, raw
180
6 minutes, turn after 3 minutes.
Beef steak rosa, medium
180
8 minutes, turn after 2 minutes.
Beef steak durch, well done
180
8 minutes, turn after 4 minutes. Without fatty substances, the roasting time increases by approximately 20%.
Hamburger
160
6 - 8 minutes, turn after 3 - 4
minutes.
Châteaubriand
160 then 100
Sauté the meat in oil on all
sides (turn only when the
meat does not stick to the
pan). Finish off on one side
for 10 minutes (100 °C).
ENGLISH
13
Food to be cooked
Temperature (°C)
Time / Tips
Pork
160 – 180
Preheat the hob.
Pork medallions
160
8 minutes, turn after 4 minutes (depending on the
thickness).
Pork steaks
180
8 minutes, turn after 4 minutes.
Pork escalopes
160
6 minutes, turn after 3 minutes.
Spare ribs
160
8 - 10 minutes, turn several
times.
Pork skewer
160
6 - 8 minutes, sauté well on
all sides.
Lamb
160 – 180
Preheat the hob.
Lamb chops
180
10 minutes, turn after 5 minutes.
Filet of lamb
160
10 minutes, turn after 5 minutes. The filet must be fried
on both sides.
Lamb steaks
160
6 - 8 minutes, turn after 3 - 4
minutes.
Poultry
140 – 160
Preheat the hob.
Chicken supreme
140
8 - 10 minutes, turn after 4 5 minutes.
Turkey breast strips
160
6 minutes, turn several
times.
Sausages
160
Preheat the hob.
Fried egg
140
Preheat the hob.
Crepes / Omelettes
140 - 160
Preheat the hob.
Fruits
140 - 160
Preheat the hob.
Vegetables
140 - 160
10 - 20 minutes, turn several
times.
Vegetables
140 - 160
10 - 15 minutes, under a
cooking lid (turn halfway
through).
Cooking precooked rice
140 - 160
10 - 15 minutes, turn several
times.
14
www.aeg.com
Food to be cooked
Temperature (°C)
Cooking precooked noodles 140 - 160
Time / Tips
15 - 20 minutes, turn halfway
through.
7. CARE AND CLEANING
Clean the hob after each use.
2. Remove the cooking residue with a
spatula.
3. Clean the hob with a moist cloth.
4. Dry the hob with a clean cloth.
5. When the hob is dry, rub the roasting
surface with some cooking oil.
Always use cookware with clean bottom.
7.4 Glass bar
WARNING!
Refer to Safety chapters.
7.1 General information
WARNING!
Sharp objects and abrasive
cleaning agents will damage
the appliance.
7.2 Cleaning function
1. Touch . Each zone is set to 80°C.
The display flashes until the
temperature is 80°C. The function
locks the control panel, but not .
2. When the temperature reaches 80°C
an acoustic signal sounds, and the
control panel becomes unlocked.
3. Put ice cubes one by one on the
roasting zone (you can use also cold
water). At the same time, use a
spatula to remove the remaining
roasting pieces and push all pieces
into the trough.
4. Dry the hob with a clean cloth.
7.3 Cleaning when the hob is
cold
1. Apply a usual cleaning agent to the
roasting surface and let it set for 5
minutes.
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
• Do not use the scraper or sharp
objects to clean the glass bar and the
space between it and glass ceramic.
Glass bar is attached to the ceramic
plate.
• Do not put the pots on the glass bar.
• Make sure that the pans and pots do
not touch the glass bar.
ENGLISH
15
8.1 What to do if...
Problem
Possible cause
You cannot activate or oper- The hob is not connected to
ate the hob.
an electrical supply or it is
connected incorrectly.
The fuse is released.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
Make sure that the fuse is
the cause of the malfunction.
If the fuse releases again
and again, contact a qualified electrician.
Activate the hob again and
set the heat setting in less
than 10 seconds.
You touched 2 or more sensor fields at the same time.
Touch only one sensor field.
There is water or fat stains
on the control panel.
Clean the control panel.
An acoustic signal sounds
You put something on one
and the hob deactivates.
or more sensor fields.
An acoustic signal sounds
when the hob is deactivated.
Remove the object from the
sensor fields.
The hob deactivates.
Remove the object from the
sensor field.
You put something on the
sensor field
.
Residual heat indicator does
not come on.
The zone is not hot because If the zone operated suffiit operated only for a short
ciently long to be hot, speak
time.
to an Authorised Service
Centre.
Automatic Heat Up function
does not operate.
The zone is hot.
Let the zone become sufficiently cool.
The highest heat setting is
set.
The highest heat setting has
the same power as the function.
The signals are deactivated.
Activate the signals.
Refer to "Daily use" chapter.
comes on.
Automatic Switch Off operates.
Deactivate the hob and activate it again.
comes on.
The Child Safety Device or
the Lock function operates.
Refer to "Daily use" chapter.
There is no signal when you
touch the panel sensor
fields.
16
www.aeg.com
Problem
and a number come on.
Possible cause
Remedy
There is an error in the hob.
Disconnect the hob from the
electrical supply for some
time. Disconnect the fuse
from the electrical system of
the house. Connect it again.
If
comes on again, speak
to an Authorised Service
Centre.
comes on.
The electrical connection is
Speak to a qualified electriincorrect. The supply voltage cian to check the installation.
is out of range.
comes on.
There is an error in the hob
because a cookware boils
dry. Automatic Switch Off
and the overheating protection for the zones operate.
Deactivate the hob. Remove
the hot cookware. After approximately 30 seconds, activate the zone again. If the
cookware was the problem,
the error message goes out.
Residual heat indicator can
stay on. Let the cookware
become sufficiently cool.
Check if your cookware is
compatible with the hob.
Refer to “Hints and tips”
chapter.
comes on.
The cooling fan is blocked.
Check if objects block the
cooling fan. If
comes on
again, speak to an Authorised Service Centre.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
9. INSTALLATION
WARNING!
Refer to Safety chapters.
9.1 Before the installation
Before you install the hob, write down
the information bellow from the rating
plate. The rating plate is on the bottom
of the hob.
Serial number ...........................
ENGLISH
17
9.2 Built-in hobs
9.4 Attaching the seal
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
1. Clean the worktop around the cut
out area.
2. Attach the supplied seal stripe to the
lower edge of the hob along the
outer edge of the glass ceramic. Do
not extend it. Make sure that the
ends of the seal stripe are located in
the middle of one side of the hob.
3. Add some mm when you cut the seal
stripe to the length.
4. Push the two ends of seal stripe
together.
9.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable
use the following (or higher) mains
cable type: H05BB-F T min 90°C.
Speak to your local Service Centre.
9.5 Assembly
min.
500mm
min.
50mm
min.
2mm
R5 mm
490+1 mm 560+1 mm
min.
55mm
www.aeg.com
50 mm
50 mm
min.
25 mm
min.
2 mm
9.6 Installation of more than
one hob
Supplied accessories: connection bar,
heat-resistant silicone, rubber shape,
sealing stripe.
Use only a special heatresistant silicone.
The worktop cutout
Distance
from the
wall
minimum 50 mm
Depth
490 mm
Width
sum of all widths of hobs that
you install minus 20 mm
Example:
580 mm
+
360 mm
-
20 mm
=
920 mm
490 mm
• Seal the gap between the worktop
and glass ceramic with silicone.
• Put some soapy water on the silicone.
• Pull off the excess silicone with the
scraper.
520 mm
18
Assembly
1. Calculate correct cutout dimensions.
2. Prepare cutout in the worktop.
3. One by one place the hobs on a soft
surface (for example on a blanket)
with the bottom side up.
4. Attach the supplied seal stripe to the
lower edge of the hob along the
outer edge of the glass ceramic.
5. Loosely screw the fixing plates into
the correct holes in the protective
casing.
6. Insert first hob into the worktop
cutout. Than insert the connection
bar into the worktop cutout. Push it
half of its width under the hob.
ENGLISH
9. Tighten the fixing plates / retaining
grip screws.
10. Use silicone to seal the gaps
between the hobs and between the
hobs and the worktop.
11. Put some soapy water on the
silicone.
12. Press the rubber shape with some
strength against the glass ceramic
and move it slowly along the space.
7. Loosely screw in the fixing plates
from below to the worktop and to
the connection bar.
13. Do not touch the silicone until it
becomes hard, it can last about a
day.
14. Carefully remove the silicone that
came out with a shaving blade.
15. Clean the glass surface.
8. Insert next hob into the worktop
cutout. Make sure that the front
edges of the hobs are on the same
level.
10. TECHNICAL INFORMATION
10.1 Rating plate
Modell HC652600EB
Typ 55 TEP 01 AU
Induction 5.6 kW
Ser.Nr. .................
AEG
PNC 941 560 808 00
220 - 240 V 50 - 60 Hz
5.6 kW
10.2 Roasting zones specification
Roasting zone
Nominal power (maximum heat setting)
[W]
Front
2800
Rear
2800
The power of the roasting zones can be
different in some small range from the
data in the table. It changes with the
19
material and dimensions of the
cookware.
20
www.aeg.com
11. WARRANTY
FOR SALES IN AUSTRALIA AND NEW
ZEALAND
ALL AEG BRANDED APPLIANCES
This document sets out the terms and
conditions of the product warranties
for AEG Appliances. It is an important
document. Please keep it with your
proof of purchase documents in a safe
place for future reference should you
require service for your Appliance.
1. In this warranty
a) ‘acceptable quality’ as referred to
in clause 10 of this warranty has
the same meaning referred to in
the ACL;
b) ‘ACL’ means Schedule 2 to the
Competition and Consumer Act
2010;
c) ‘Appliance’ means any AEG
product purchased by you and
accompanied by this document;
d) ‘ASC’ means AEG authorised
service centres;
e) AEG is the brand controlled by
Electrolux Home Products Pty
Ltd of 163 O’Riordan Street,
Mascot NSW 2020, ABN 51 004
762 341 in respect of Appliances
purchased in Australia and
Electrolux (NZ) Limited
(collectively ‘Electrolux’) of 3-5
Niall Burgess Road, Mount
Wellington, in respect of
Appliances purchased in New
Zealand;
f) ‘major failure’ as referred to in
clause 10 of this warranty has the
same meaning referred to in the
ACL and includes a situation
when an Appliance cannot be
repaired or it is uneconomic for
Electrolux, at its discretion, to
repair an Appliance during the
Warranty Period;
g) ‘Warranty Period’ means the
Appliance is warranted against
manufacturing defects in
Australia and New Zealand for 60
months, following the date of
2.
3.
4.
5.
original purchase of the
Appliance;
h) ‘you’ means the purchaser of the
Appliance not having purchased
the Appliance for re-sale, and
‘your’ has a corresponding
meaning.
This warranty only applies to
Appliances purchased and used in
Australia or New Zealand in normal
domestic applications and is in
addition to (and does not exclude,
restrict, or modify in any way) any
non-excludable statutory warranties
in Australia or New Zealand.
During the Warranty Period
Electrolux or its ASC will, at no extra
charge if your Appliance is readily
accessible for service, without special
equipment and subject to these
terms and conditions, repair or
replace any parts which it considers
to be defective. Electrolux or its ASC
may use remanufactured parts to
repair your Appliance. You agree that
any replaced Appliances or parts
become the property of Electrolux.
This warranty does not apply to light
globes, batteries, filters or similar
perishable parts.
Parts and Appliances not supplied by
Electrolux are not covered by this
warranty.
To the extent permitted by law, you
will bear the cost of transportation,
travel and delivery of the Appliance
to and from Electrolux or its ASC. If
you reside outside of the service
area, you will bear the cost of:
a) travel of an authorised
representative;
b) transportation and delivery of the
Appliance to and from Electrolux
or its ASC.
In all instances, unless the Appliance
is transported by Electrolux or an
AEG authorised representative, the
Appliance is transported at the
ENGLISH
6.
7.
8.
9.
owner’s cost and risk while in transit
to and from Electrolux or its ASC.
Proof of purchase is required before
you can make a claim under this
warranty.
You may not make a claim under this
warranty unless the defect claimed is
due to faulty or defective parts or
workmanship. Electrolux is not liable
in the following situations (which are
not exhaustive):
a) the Appliance is damaged by:
– accident
– misuse or abuse, including
failure to properly maintain or
service
– normal wear and tear
– power surges, electrical storm
damage or incorrect power
supply
– incomplete or improper
installation
– incorrect, improper or
inappropriate operation
– insect or vermin infestation
– failure to comply with any
additional instructions
supplied with the Appliance;
b) the Appliance is modified
without authority from Electrolux
in writing;
c) the Appliance’s serial number or
warranty seal has been removed
or defaced;
d) the Appliance was serviced or
repaired by anyone other than
Electrolux, an authorised repairer
or ASC.
This warranty, the contract to which it
relates and the relationship between
you and Electrolux are governed by
the law applicable where the
Appliance was purchased. Where the
Appliance was purchased in New
Zealand for commercial purposes the
Consumer Guarantee Act does not
apply.
To the extent permitted by law and
subject to your non-excludable
statutory rights and warranties, AEG
excludes all warranties and liabilities
(other than as contained in this
21
document) including liability for any
loss or damage whether direct or
indirect arising from your purchase,
use or non use of the Appliance.
10. For AEG Appliances and services in
Australia, the Appliances come with a
guarantee that cannot be excluded
under the ACL. You are entitled to a
replacement or refund for a major
failure and for compensation for any
other reasonably foreseeable loss or
damage. You are also entitled to
have the Appliance repaired or
replaced if the Appliance fails to be
of acceptable quality and the failure
does not amount to a major failure.
The benefits to you given by this
warranty are in addition to your other
rights and remedies under a law in
relation to the Appliances or services
to which the warranty relates.
11. At all times during the Warranty
Period, Electrolux shall, at its
discretion, determine whether repair,
replacement or refund will apply if an
Appliance has a valid warranty claim
applicable to it.
12. For Appliances and services provided
in New Zealand, the Appliances
come with a guarantee pursuant to
the provisions of the Consumer
Guarantees Act, the Sale of Goods
Act and the Fair Trading Act.
13. To enquire about claiming under this
warranty, please follow these steps:
a) carefully check the operating
instructions, user manual and the
terms of this warranty;
b) have the model and serial
number of the Appliance
available;
c) have the proof of purchase (e.g.
an invoice) available;
d) telephone the numbers shown
below.
14. You accept that if you make a
warranty claim, Electrolux and its
ASC may exchange information in
relation to you to enable Electrolux
to meet its obligations under this
warranty.
22
www.aeg.com
Important Notice
Before calling for service, please ensure that the steps listed in clause 13 above have been
followed.
SERVICE AUSTRALIA
www.aeg.com/au
FOR SERVICE
or to find the address of your nearest state service centre in Australia
PLEASE CALL 1300 363 664
OR EMAIL [email protected]
For the cost of a local call (Australia only)
FOR SPARE PARTS
or to find the address of your nearest state spare parts centre in Australia
PLEASE CALL 13 13 50
OR EMAIL [email protected]
For the cost of a local call (Australia only)
SERVICE NEW ZEALAND
www.aeg.co.nz
FOR SERVICE
or to find the address of your nearest authorised service centre in New Zealand
FREE CALL 0800 10 66 10
OR EMAIL [email protected]
(New Zealand only)
FOR SPARE PARTS
or to find the address of your nearest state spare parts centre in New Zealand
FREE CALL 0800 10 66 20
OR EMAIL [email protected]
(New Zealand only)
12. ENVIRONMENT CONCERNS
Recycle the materials with the symbol .
Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
*
marked with the symbol with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
ENGLISH
23
867322282-A-152015
www.aeg.com/au

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement