IKEA | DAGLIG | User manual | IKEA DAGLIG User Manual

AU
LEVERERA
ENGLISH
4
4
ENGLISH
Contents
Safety information
Conditions of Use
Safety Instructions
Product description
Daily Use
Hints and tips
4
5
5
8
9
11
Care and cleaning
Troubleshooting
Installation
Technical information
IKEA GUARANTEE
12
12
14
15
16
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible if
an incorrect installation and use causes injuries and damages.
Always keep the instructions with the appliance for future
reference.
Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, we recommend you
activate it.
Cleaning and user maintenance shall not be made by
children without supervision.
Children of less than 3 years should be kept away unless
continuously supervised.
ENGLISH
5
General Safety
•
•
•
•
•
•
•
•
•
The appliance and its accessible parts become hot during
use. Do not touch the heating elements.
Do not operate the appliance by means of an external timer
or separate remote-control system.
Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
Never try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire
blanket.
Do not store items on the cooking surfaces.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
Do not use a steam cleaner to clean the appliance.
If the glass ceramic surface/ glass surface is cracked, switch
off the appliance to avoid the possibility of electric shock
If the supply cord is damaged, it must be replaced by the
manufacturer, the Service or similarly qualified persons in
order to avoid a hazard.
Conditions of Use
This appliance is intended to be used in
household and similar applications such as:
• Farm houses
• By clients in serviced apartments, holiday
apartments and other residential type
environments
Safety Instructions
Installation
Warning! Only a qualified
person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Obey the installation instruction supplied
with the appliance.
• Keep the minimum distance from the
other appliances and units.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
6
ENGLISH
• Protect the bottom of the appliance from
steam and moisture.
• Do not install the appliance adjacent to
a door or under a window. This prevents
hot cookware to fall from the appliance
when the door or the window is opened.
• If the appliance is installed above
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for air
circulation.
• The bottom of the appliance can get hot.
Make sure to install a non-combustile
separation panel under the appliance to
prevent access to the bottom.
Refer to the Assembly Instructions.
Electrical Connection
Warning! Risk of fire and
electrical shock.
• All electrical connections should be made
by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
• Make sure that the electrical information
on the rating plate agrees with the
power supply. If not contact an
electrician.
• Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable
tangle.
• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact an Authorised Service
Centre or an electrician to change a
damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in such
a way that it cannot be removed without
tools.
• Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
Use
Warning! Risk of injury, burns
and electrical shock.
• Remove all the packaging, labelling and
protective film (if applicable) before first
use.
• Use this appliance in a household
environment.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended
during operation.
• Set the cooking zone to “off” after each
use.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become hot.
7
ENGLISH
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is cracked,
disconnect immediately the appliance
from the power supply. This to prevent
an electrical shock.
• When you place food into hot oil, it may
splash.
Warning! Risk of fire and
explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food remnants,
can cause fire at a lower temperature
than oil used for the first time.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
Warning! Risk of damage to the
appliance.
• Do not keep hot cookware on the control
panel.
• Do not let cookware to boil dry.
• Be careful not to let objects or cookware
fall on the appliance. The surface can be
damaged.
• Do not activate the cooking zones with
empty cookware or without cookware.
• Do not put aluminium foil on the
appliance.
• Cookware made of cast iron, aluminium
or with a damaged bottom can cause
scratches on the glass / glass ceramic.
Always lift these objects up when you
have to move them on the cooking
surface.
• This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
Care and cleaning
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Deactivate the appliance and let it cool
down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
Disposal
Warning! Risk of injury or
suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
ENGLISH
8
Product description
Cooking surface layout
1
1 Single cooking zone 1200 W
2 Multi-purpose oval zone 1500 / 2400
W
3 Single cooking zone 1200 W
4 Control panel
5 Triple ring cooking zone 800 / 1600 /
2300 W
2
145 mm
120/175/210 mm
170/265 mm
145 mm
3
5
4
Control panel layout
1
2
3
10
1
2
To switch the hob on or off.
To activate and deactivate the Lock
or the Child Safety Device.
3
To activate the function STOP+GO.
4 Timer indicators of cooking zones.
5 Timer display: 00 - 99 minutes.
6
To activate the multi-purpose oval
zone.
7 A heat setting display: ,
- .
8 Control bar to select heat settings.
4
5
9
9
10
6
8
7
/
To increase, or to decrease the
Timer.
To activate the outer rings.
Touch Control sensor fields and displays
You operate the hob by touching sensor
fields. Displays and acoustic signals (short
beep) confirm the selection of a function.
ENGLISH
9
Heat setting display
Description
Heat setting display
Cooking zone is
switched off.
-
Heat setting is set.
A malfunction occurred.
A cooking zone is
still hot.
The Child Safety
Device or the Lock
is on.
Description
STOP+GO is on.
Residual heat indicator
Warning! Risk of burns from
residual heat! After you switch
the appliance off, the cooking
zones need some time to cool
down. Look at the residual heat
indicator
.
Use residual heat for melting and keeping
food warm.
The Automatic
Switch Off is on
Daily Use
Switching on and off
Touch
for 2 seconds to switch the
appliance on or off.
Adjusting the heat setting
Touch the control bar at a desired heat
setting. Correct to the left or the right, if
necessary. Do not release before you reach
a desired heat setting.
Before an outside oval can be
switched on, the inside ring must
be switched on.
Switching the outside rings on and off
Switch on the inside ring before you switch
for 1 - 2
on the outside rings by touching
seconds. For more outer rings touch the
same sensor field again. The subsequent
indicator comes on. Repeat the procedure
to switch off the outside rings.
Using the Timer
Activating and deactivating the outer
rings
Switching the oval zone on and off
Switch the oval zone on by touching
for
1 - 2 seconds. Repeat the procedure to
switch off the outside ring.
Touch
repeatedly until the pilot light of a
desired cooking zone displays. For example
for the front left zone.
10
ENGLISH
First set the heat setting.
To start this function touch
on.
Touch
or
of the Timer to set the time
between 00 and 99 minutes. When the
pilot light flashes more slowly, the time
counts down. Set the heat settings.
If the heat setting is set and the time set has
elapsed, acoustic signal appears, 00
flashes, and cooking zone switches off. If
cooking zone is not in use and the time set
has elapsed acoustic signal appears and
00 flashes.
Select
for a cooking zone to switch off
the function, and the pilot light of the
cooking zone selected flashes faster. Touch
and the remaining time counts
backwards to 00. The pilot light goes out.
STOP+GO
The function sets all cooking zones that
operate to the lowest heat setting . When
the function operates, you cannot change
the heat setting. The function does not stop
the timer function.
. The symbol
comes on for 4 seconds. The Timer stays
To stop this function touch . The heat
setting that you set before comes on.
When you stop the appliance, you also stop
this function.
The Child Safety Device
This function prevents an accidental
operation of the appliance.
To activate the Child Safety Device
• Activate the appliance with . Do not
set the heat settings.
• Touch
for 4 seconds. The symbol
comes on.
• Deactivate the appliance with .
To deactivate the Child Safety Device
• Activate the appliance with . Do not
set the heat settings. Touch
for 4
comes on.
seconds. The symbol
• Deactivate the appliance with .
To override the Child Safety Device for
only one cooking time
Lock
• Activate the appliance with . The
comes on.
symbol
for 4 seconds. Set the heat
• Touch
setting in 10 seconds. You can operate
the appliance.
• When you deactivate the appliance with
, the Child Safety Device operates
again.
When the cooking zones operate, you can
Automatic Switch off
lock the control panel, but not . It
prevents an accidental change of the heat
setting.
The function switches the hob off
automatically if:
• To activate this function touch . The
comes on.
symbol
• To deactivate this function touch . The
heat setting that you set before comes
on.
• all cooking zones are switched off.
ENGLISH
11
• you do not set the heat setting after
switching on the hob.
• you cover any sensor field with objects (a
pan, a cloth, etc.) for longer than approx.
10 seconds.
• you do not switch a cooking zone off
after a certain time, or you do not modify
the heat setting, or if the overheating
occurs (e.g. when a pan boils dry). The
symbol
lights up. Before using again,
you must set the cooking zone to .
Heat setting
Automatic switch off
after
-
6 hours
-
5 hours
Touch
for 3 seconds. The displays come
on and go out. Touch
for 3 seconds.
comes on, the sound is on. Touch
comes on, the sound is off.
,
When this function operates, you can hear
the sounds only when:
• you touch
• you put something on the control panel.
Activation of the sounds
Deactivate the appliance.
Touch
for 3 seconds. The displays come
on and go out. Touch
for 3 seconds.
comes on, because the sound is off. Touch
,
comes on. The sound is on.
4 hours
-
1.5 hours
OffSound Control (Deactivation and
activation of the sounds)
Deactivation of the sounds
Deactivate the appliance.
Hints and tips
Noises during operation
When a cooking zone is switched
on, it may hum briefly. This is a
characteristic of all ceramic glass
cooking zones and does not
impair either the function or the
life of the appliance.
How to avoid damage to the appliance
• The glass ceramic can be damaged by
objects falling onto it, or knocked by the
cookware.
• Cookware made of cast iron, cast
aluminum or with damaged bottoms can
scratch the glass ceramic if slid on the
surface.
• To avoid damaging cookware and glass
ceramics, do not allow saucepans or
frying pans to boil dry.
• Do not use the cooking zones with empty
cookware or without cookware.
• Never line any part of the appliance with
aluminium foil. Never place plastic or any
other material which may melt in or on
the appliance.
Energy saving
• If possible, always place lids on the pans.
• Place cookware on the cooking zone
before you switch it on.
ENGLISH
• The bottom of the cookware should be
as thick and flat as possible.
• Switch cooking zones off before the end
of the cooking time, to take advantage
of residual heat
12
• Bottom of pans and cooking zones
should be the same size.
Care and cleaning
General information
Warning! Switch the appliance
off and let it cool down before
you clean it.
Warning! For safety reasons, do
not clean the appliance with
steam blasters or high-pressure
cleaners.
Warning! Sharp objects and
abrasive cleaning agents will
damage the appliance. Clean
the appliance and remove the
residues with water and washing
up liquid after each use. Remove
also the remnants of the cleaning
agents!
Scratches or dark stains on the
glass ceramic that cannot be
removed do not affect the
functioning of the appliance.
Troubleshooting
Warning! Refer to Safety
chapters.
Removing the residues and stubborn
residues
1. Food containing sugar, plastics, tin foil
residues should be removed at once,
best tool for cleaning glass surface is a
scraper (not included with the
appliance). Place a scraper on the glass
ceramic surface at an angle and remove
residues by sliding the blade over the
surface. Wipe the appliance with a
damp cloth and a little washing up
liquid. Finally, rub the appliance dry
using a clean cloth.
2. Limescale rings, water rings, fat
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for glass
ceramic or stainless steel.
ENGLISH
13
What to do if…
Problem
Possible cause
Remedy
The appliance cannot be
The appliance is not connec- Check if the appliance is corswitched on or is not operat- ted to an electrical supply or rectly connected to the elecing.
it is connected incorrectly.
trical supply (refer to connection diagram).
More than 10 seconds
passed since you switched
on the hob.
Switch the appliance on
again.
The Child Safety Device or
Deactivate the Child Safety
Device (See the section
“Child Safety Device" or
"Lock").
the Lock is on
Acoustic signal sounds, appliance switches off.
.
Several sensor fields were
touched at the same time.
Only touch one sensor field.
One or more sensor fields
have been covered for longer than 10 seconds.
Uncover sensor field.
The residual heat indicator is The cooking zone was only
not displaying anything.
on for a short time and is
therefore not hot.
If the cooking zone is supposed to be hot, call the After Sales Service.
There is no signal when you The signals are deactivated.
touch the panel sensor fields.
Activate the signals. Refer to
OffSound Control.
symbol plus a number
appears on the heat setting
display.
Electronics fault.
Disconnect the appliance
from the electrical supply for
a few minutes. Take the fuse
out of the house’s electric
system. If after switching on
again,
is displayed
again, call the After Sales
Service.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a
solution to the problem yourself, contact
your dealer or the After Sales Service.
14
ENGLISH
If you operated the appliance
wrongly, or the installation was
not carried out by a registered
engineer, the visit from the After
Sales Service technician or
dealer may not take place free
of charge, even during the
warranty period.
Installation
General information
Manufacturer is not responsible for any
injury to persons and pets or damage to
property caused by failure to comply
following requirements.
Caution! To proceed with the
installation refer to the assembly
instructions.
Warning! Installation process
must follow the laws, ordinances,
directives and standards
(electrical safety rules and
regulations, proper recycling in
accordance with the regulations,
etc.) in force in the country of use!
Warning! The appliance must be
earthed!
Warning! Risk of injury from
electrical current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Loose and inappropriate plug and
socket connections can make the
terminal overheat.
• Have the clamping connections correctly
installed.
• Use strain relief clamp on cable.
• Follow the connection diagram (it is
located on the underneath surface of the
casting of the hob).
Important!
• You must observe the minimum distances
to other appliances and furniture
cabinets or other units according to
Assembly Instruction.
• If there is no oven beneath the hob insert
a dividing panel at a minimum distance
of 20 mm from the bottom of the hob.
• Do not use silicon sealant between the
appliance and the worktop. Avoid
installing the appliance next to doors
and under windows as hot cookware
may be knocked off the rings when doors
and windows are opened.
• Only an authorized service engineer can
install, connect or repair this appliance.
Use only original spare parts.
Electrical connection
• Before connecting, check that the
nominal voltage of the appliance stated
on the rating plate, corresponds to the
available supply voltage. Also, check the
power rating of the appliance and
ensure that the wire is suitably sized to
suit the appliance power rating (refer to
the Technical information chapter). The
rating plate is located on the lower
casing of the hob.
• The appliance is not provided with mains
cable. Buy the right one from specialized
dealer. Single-phase or two-phase
ENGLISH
15
connection requires the mains cable of
type H05BB-F/H05V2V2-F Tmax 90°C
(equal or higher).
• The appliance works perfectly on AC
230 V, AC 220 V~ or AC 240 V~ 50 Hz
electrical network.
• You must have the means for
disconnection incorporated in the fixed
wiring. Have the appliance connected to
the mains using a device that allows the
appliance to be disconnected from the
mains at all poles with a contact opening
width of at least 3 mm, eg. automatic line
protecting cut-out, earth leakage trips or
fuse.
• You must have the connection and the
connecting links carried out as shown in
the connection diagram (it is located on
the underneath surface of the casing of
the hob). The earth lead is connected to
terminal marked with the symbol and
must be longer than leads carrying
electric current. Tighten the terminal
screws securely! Finally, secure the
connecting cable with the mains cable
cleat and the covering closed by
pressing firmly (lock into place).
Warning! Once connected to the
mains supply check that all
cooking zones are ready for use
by briefly setting each to
maximum power.
Technical information
Rating Plate
Made in Germany
© Inter IKEA Systems B.V.
602.847.22
21552
IKEA of Sweden AB
SE - 343 81 Älmhult
The graphic above represents the rating
plate of the appliance (without serial
number which is generated dynamically
during the production process), which is
located at its underneath surface of the
casing.
Dear Customer, please apply here aside
the sticker you can find in the dedicate
Model DAGLIG Typ 58 HAD 56 AO 7,1kW
PNC 949 594 369 00 S NO ............... 220V-240V AC 50-60 Hz
230 V
DGT
plastic bag inserted inside the hob
packaging. This will allow us to assist you
better, by identifying precisely your hob, in
case you will need in future our assistance.
Thank you for your help!
16
ENGLISH
IKEA GUARANTEE
How long is the IKEA guarantee valid?
This guarantee is valid for five (5) years
from the original date of purchase of Your
appliance at IKEA Pty Ltd, ABN
84006270757 or at Cebas Pty Ltd, ABN 15
009 156 003 (Both Trading as IKEA) unless
the appliance is named LAGAN in which
case two (2) years of guarantee apply. The
original sales receipt is required as proof of
purchase. If service work is carried out
under guarantee, this will not extend the
guarantee period for the appliance.
Which appliances are not covered by the
IKEA five (5) years guarantee?
The range of appliances named LAGAN .
Who will execute the service?
IKEA service provider will provide the service through its own service operations or
authorized service partner network. Contact
IKEA for further information.
If you encounter any trouble with the
appliance and wish to register a service call
or make a claim, please refer to
www.ikea.com.au for your local store after
sales customer service center phone
number, online email and opening times.
The principal address and contact details in
Australia are:
For Queensland, New South Wales, and
Victorian customers please contact:
IKEA Pty Ltd
IKEA Pty Ltd
IKEA Service Office
L1 Clock Tower, 630 Princes Highway
Tempe, NSW 2044
Contact - IKEA Customer Service at
www.IKEA.com.au
For Western Australian and South
Australian customers please contact:
Cebas Pty Ltd
8c Sunray Drive, Innaloo WA 6018
Australia
Contact - IKEA Customer Service at
www.IKEA.com.au
What does this guarantee cover?
The guarantee covers faults of the appliance, which have been caused by faulty
construction or material faults from the date
of purchase from IKEA. This guarantee applies to domestic use only. The products
have been designed and tested for
domestic purposes only and this guarantee
does not cover damage arising from use of
the Product in a commercial environment.
The exceptions are specified under the
headline "What is not covered under this
guarantee?" Within the guarantee period,
the costs to remedy the fault e.g. repairs,
parts, labour and travel will be covered,
provided that the appliance is accessible
for repair without special expenditure.
Replaced parts become the property of
IKEA.
The guarantee exists only if the appliance
complies and is installed in accordance
with:
• The technical specifications.
• The Assembly Instructions and user
manual Safety Information.
ENGLISH
IKEA's guarantee is subject to Australian
Consumer Law - see Schedule 2 to
Competition and Consumer Act, 2010. This
guarantee is in addition to (and does not
exclude, restrict or modify in any way) any
non-excludable statutory warranties in
Australia.
What will IKEA do to correct the problem?
IKEA appointed service provider will examine the product and decide, at its sole discretion, if it is covered under this guarantee.
They will notify you as to whether your
claim is covered under this guarantee. If
your claim is approved, the IKEA service
provider or its authorized service partner,
will then, at its sole discretion, either repair
the defective product or replace it with the
same or a comparable product.
What is not covered under this
guarantee?
• Normal wear and tear.
• Deliberate or negligent damage, damage caused by failure to observe operating instructions, incorrect installation or
by connection to the wrong voltage, damage caused by chemical or electro-chemical reaction, rust, corrosion or water
damage including but not limited to damage caused by excessive lime in the water supply, damage caused by abnormal
environmental conditions.
• Consumable parts including batteries
and lamps.
• Non-functional and decorative parts
which do not affect normal use of the appliance, including any scratches and possible colour differences.
• Accidental damage caused by foreign
objects including insect or vermin
infestation or substances and cleaning or
unblocking of filters, drainage systems or
soap drawers.
• Damage to the following parts: ceramic
glass, accessories, crockery and cutlery
baskets, feed and drainage pipes, seals,
17
lamps and lamp covers, screens, knobs,
casings and parts of casings. Unless such
damages can be proved to have been
caused by production faults.
• Cases where no fault could be found during a technician's visit.
• Repairs not carried out by our appointed
service providers and/or an authorized
service contractual partner or where
non-original parts have been used.
• Repairs caused by installation which is
faulty or not according to specification.
• The use of the appliance in a non-domestic environment i.e. professional use.
• Transportation damages. If a customer
transports the product to their home or
other address, IKEA is not liable for any
damage that may occur during transport.
However, if IKEA delivers the product to
the customer's delivery address, then
damage to the product that occurs
during this delivery will be covered by
this guarantee.
• Cost for carrying out the initial
installation of the IKEA appliance.
However, if an IKEA service provider or
its authorized service partner repairs or
replaces the appliance under the terms
of this guarantee, the service provider or
its authorized service partner will reinstall the repaired appliance or install
the replacement, if necessary.
• The appliance's serial number or
warranty seal has been removed or
defaced.
How country law applies
Our goods come with guarantees that
cannot be excluded under the Australian
Consumer Law (ACL). You are entitled to a
replacement or refund for a major failure
and compensation for any other reasonably
foreseeable loss or damage.
You are also entitled to have the goods
repaired or replaced if the goods fail to be
of acceptable quality and the failure does
not amount to a major failure.
ENGLISH
This guarantee is not intended in any way
to limit or exclude such rights and remedies
that you may have under law.
You can find out more information about
the Australian Consumer Law on the ACCC
website: www.accc.gov.au
18
sembly Instructions and/or the User Manual
section of this booklet before contacting us.
How to reach us if you need our service
Area of validity
This IKEA guarantee applies only to
products purchased and installed in
AUSTRALIA .
What you must do to make a claim under
the guarantee:
To make a claim under the guarantee
contact IKEA after sales customer service
center at the above address, the IKEA
catalogue or refer to www.ikea.com.au for
your local store customer service phone
number, online email and opening times.
Please describe the problem that you are
facing with the appliance in detail along
with your product article number (8 digit
code) and date of purchase at the time of
call registration.
Please do not hesitate to contact the
dedicated after sales customer service
center for IKEA appliances to:
1. Make a service request under this guarantee;
2. Ask for clarification on installation of the
IKEA appliance in the dedicated IKEA
kitchen furniture.
3. Ask for clarification on user manual contents and specifications of the IKEA appliance.
The IKEA after sales customer service centre
will assist you on the phone with basic
trouble shooting for your appliance at the
time of service call request. Please refer to
the IKEA catalogue or www.ikea.com.au
and select your local store for local store
phone numbers and opening times.
Please describe the problem that
you are facing with the
appliance in detail along with
your product article number ( 8
digit code ) and date of purchase
at the time of call registration .
SAVE THE SALES RECEIPT!
Kindly keep all these details and
original invoice of purchase
handy during the service
technician's visit to enable him to
carry out the job. It is your proof
of purchase and required for the
guarantee to apply. Note that
the receipt reports also the IKEA
article name and number (8 digit
code) for each of the appliances
you have purchased.
To ensure that we provide you with the best
assistance, please read carefully the As-
ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol .
Put the packaging in applicable containers
to recycle it. Help protect the environment
and human health and to recycle waste of
ENGLISH
19
electrical and electronic appliances. Do not
dispose appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
*
892965436-A-112014
© Inter IKEA Systems B.V. 2014
21552
AA-1070064-1
Download PDF

advertising