Electrolux TY38TSICN User Manual

Profiline
TY38TSICN
................................................ .............................................
EN INDUCTION - TEPPAN YAKI
USER MANUAL
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information
Safety instructions
Product description
Daily use
Helpful hints and tips
2
3
5
7
9
Care and cleaning
Troubleshooting
Installation
Environment concerns
11
12
12
15
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
CHILDREN AND VULNERABLE PEOPLE SAFETY
Warning! Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they are supervised by an adult or a person who is responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot.
• If the appliance has a child safety device, we recommend
that you activate it.
• Cleaning and user maintenance shall not be made by children without supervision.
GENERAL SAFETY
• The appliance and its accessible parts become hot during
use. Do not touch the heating elements.
• Do not operate the appliance by means of an external timer
or separate remote-control system.
electrolux 3
• Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
• Never try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they can get
hot.
• If the glass ceramic surface is cracked, switch off the appliance to avoid the possibility of electric shock.
• After use, switch off the hob element by its control and do
not rely on the pan detector.
SAFETY INSTRUCTIONS
INSTALLATION
Warning! Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied
with the appliance.
• Keep the minimum distance from the
other appliances and units.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance from
steam and moisture.
• Do not install the appliance adjacent to a
door or under a window. This prevents
hot cookware to fall from the appliance
when the door or the window is opened.
• If the appliance is installed above drawers
make sure that the space, between the
bottom of the appliance and the upper
drawer, is sufficient for air circulation.
• Make sure that the ventilation space of 2
mm, between the worktop and the front
of the below unit, is free. The warranty
does not cover damages caused by the
lack of an adequate ventilation space.
• The bottom of the appliance can get hot.
We recommend to install a non-combustile separation panel under the appliance
to prevent access to the bottom.
Electrical connection
Warning! Risk of fire and electrical
shock.
• All electrical connections must be made
by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets
• Make sure the appliance is installed correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.
4 electrolux
• Make sure that a shock protection is installed.
• Use the strain relief clamp on cable.
• Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact the Service or an electrician to change a damaged mains cable.
• The electrical installation must have an
isolation device which lets you disconnect the appliance from the mains at all
poles. The isolation device must have a
contact opening width of minimum 3
mm.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
USE
Warning! Risk of injury, burns or
electric shock.
• Use this appliance in a household environment.
• Do not change the specification of this
appliance.
• Do not let the appliance stay unattended
during operation.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
• Set the cooking zone to “off” after each
use. Do not rely on the pan detector.
• Do not use the appliance as a work surface or as a storage surface.
• If the surface of the appliance is cracked,
disconnect immediately the appliance
from the power supply. This to prevent
an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the induction cooking zones when the appliance is in operation.
• When you place food into a hot oil, it may
splash.
Warning! Risk of fire or explosion.
• Fats and oil when heated can release
flammable vapours. Keep flames or heated objects away from fats and oils when
you cook with them.
• The vapours that very hot oil releases can
cause spontaneous combustion.
• Used oil, that can contain food remnants,
can cause fire at a lower temperature
than oil used for the first time.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
Warning! Risk of damage to the
appliance.
• Do not keep hot cookware on the control
panel.
• Do not let cookware to boil dry.
• Be careful not let objects or cookware fall
on the appliance. The surface can be
damaged.
• Do not activate the cooking zones with
empty cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron, aluminium
or with a damaged bottom can cause
scratches on the glass ceramic. Always
lift these objects up when you have to
move them on the cooking surface.
Teppan Yaki Grill
• Noises during the operation of the appliance are normal. They are not an indication of malfunction.
• A frequent use of the appliance can
cause unevenness of the surface. This
does not have an unwanted effect on the
performance of the appliance.
CARE AND CLEANING
Warning! Risk of damage to the
appliance.
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
DISPOSAL
Warning! Risk of injury or suffocation.
electrolux 5
• Contact your municipal authority for information on how to discard the appliance
correctly.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
SERVICE
• Contact the Service to repair the appliance. We recommend only the use of
original spare parts.
PRODUCT DESCRIPTION
THE MOST IMPORTANT FEATURES OF
YOUR APPLIANCE
• The cooking surface has 2 layers of stainless steel with a layer of aluminium between them. It has a high thermal capacity, which prevents temperatures from
quickly decreasing (e.g. when you prepare meat directly from the refrigerator).
• Each Teppan Yaki grill surface is unique
because they are made by hand and
grounded by grinding specialists. Differences in the grinding pattern are normal
and do not cause problems in how the
appliance operates. Also, the more you
use your grill, the more valuable it looks.
• The groove around the edge:
– Decreases the temperature of the installation surfaces, which lets you install the cooking surface into different
types of kitchen worktops.
– Absorbs some of the expansion of the
heated cooking surface through its indentation.
•
•
•
•
– Collects small food remnants and liquids which you can easily remove after
the operation.
The necessary temperature can be kept
constant by the thermostat with a readable temperature setting. This prevents
overheating of the food and permits lowfat cooking that keeps the nutritional values of the food.
The food is heated directly on the cooking surface, with or without oil. There is
also the option of cooking with pots or
pans.
The grill surface heats to a temperature
of 180 °C in approximately 4 minutes.
The temperature of the grill surface decreases from 180 °C to 100 °C in approximately 25 minutes, and to 60 °C in
approximately 60 minutes.
You must always preheat the cooking
surface before an operation.
GENERAL OVERVIEW
1
2
3
1 Rear roasting zone 1400W
2 Front roasting zone 1400W
3 Control panel
6 electrolux
CONTROL PANEL LAYOUT
1
2
3
4
12
5
6
11
7 8
10 9
Use the sensor fields to operate the appliance. The displays, indicators and
sounds tell which functions operate.
Sensor field
Function
1
To activate and deactivate the appliance.
2
To lock / unlock the control panel.
3
To activate and deactivate the cleaning function.
4
Temperature display
To show the temperature.
5
Timer indicators of cooking zones
To show for which of the roasting zones you set
the time
6
Timer display
To show the time in minutes.
7
To show that the Count Up operates (1 to 59 minutes).
8
To show that the Count Down Timer (1 to 99 minutes) or Minute Minder function operates.
9
To increase or decrease the time.
/
10
To set the roasting zone. .
11
To set the Timer functions.
12
Control bar
To set the heat temperature.
HEAT SETTING DISPLAYS
Display
Description
The roasting zone is off.
60 - 220
The roasting zone operates.
+ digit
There is a malfunction.
/
3 step residual heat indicator: continue cooking / keep warm / residual
heat.
/
The Lock / The Child Safety Device operates.
The Automatic Switch-Off operates.
3 STEP RESIDUAL HEAT INDICATOR
Warning!
\
\
from residual heat!
Risk of burns
electrolux 7
ACCESSORIES
noodles. If you bake or roast under the
domed lid, everything stays fresh and
crispy. Undesirable steam or spitting is
largely prevented.
Important!
Turning spoon TY WS (spatula)
The ergonomic spoon serves as a multipurpose tool for turning food or for removing
burnt-on food remnants.
2 items supplied.
Additional accessories (not supplied):
The domed lid’s handle can get hot. Please
use oven gloves.
Cover/Chopping board TY SB58 (B 600/
T 605)
Important!
Stainless steel domed lid TY GG24 (255
x 140mm)
The domed lid is particularly suitable for
steaming vegetables, for keeping cooked
food warm or re-heating foods, e.g. rice,
The chopping board can only be placed
over the appliance or roasting surface when
it has cooled down completely.
Wood is a natural product. As a result,
warping and cracks can arise, as can colour variations.
DAILY USE
ON AND OFF
Touch
for 1 second to start or stop the
appliance.
THE HEAT SETTING
AUTOMATIC SWITCH OFF
The function deactivates the appliance
automatically if:
• All roasting zones are deactivated
.
• You do not set the temperature after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 seconds, (a pan, a cloth, etc.). The sound
operates some time and the appliance
deactivates. Remove the object or clean
the control panel.
• You do not deactivate a roasting zone or
change the temperature. After 90 micomes on and the appliance
nutes
deactivates. Before next use, set the
.
roasting zone to
Touch the control bar at the heat setting.
Change to the left or the right, if it is necessary. Do not release before you have a correct heat setting. The display shows the
heat setting.
If you set the temperature, the display flashes until the roasting zone reaches the temperature. Then a signal sounds and the display shows the temperature.
8 electrolux
THE TIMER
The Count Down Timer.
Use the Count Down Timer to set how long
the roasting zone operates for only this one
time.
Set the Count Down Timer after the selection of the roasting zone.
The selection of Timer function is possible for roasting zones that are active
and the heat setting is set.
• To set the roasting zone: touch
again and again until the indicator of a
necessary roasting zone comes on.
comes
When this function is activated,
on.
• To activate the Count Down Timer:
of the timer to set the time ( 00
touch
- 99 minutes). When the indicator of the
roasting zone starts to flash slow, the
time counts down.
• To see the remaining time: set the
. The indicator of
roasting zone with
the roasting zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer: set
touch
or
the roasting zone with
.
• To deactivate the Count Down Timer:
. Touch
set the roasting zone with
. The remaining time counts back to 00 .
The indicator of the roasting zone goes
out.
When the timer countdown comes to an
end, the sound operates and 00 flashes.
The roasting zone deactivates.
• To deactivate the sound: touch
The Count Up Timer
Use the Count Up Timer to monitor how
long the roasting zone operates.
• The selection of the roasting zone (if
more than 1 roasting zone operates) :
again and again until the indicatouch
tor of a necessary roasting zone comes
on.
When this function is activated,
comes
on.
• To activate the Count Up Timer:
Touch
The symbol
goes out and
comes
on.
• To see how long the roasting zone
.
operates: set the roasting zone with
The indicator of the roasting zone starts
to flash quickly. The display shows the
time that the zone operates. The display
shows the time of the roasting zone that
operates for longer period of time.
• To deactivate the Count Up Timer:
and touch
set the roasting zone with
. The symbol
goes out and
comes on.
• To reset the Count Up Timer: touch
. The time counts back to 00 .
When the two Timer functions operate
at the same time, the display shows
the Count Up Timer first.
The Minute minder.
You can use the timer as a minute minder
while the roasting zones do not operate.
.
Touch
Touch
or
of the timer to set the time.
When the time comes to an end, the sound
operates and 00 flashes.
• To stop the sound: touch
LOCK
.
You can lock the control panel, but not
It prevents an accidental change of the heat
setting.
First set the heat setting.
. The symbol
To start this function touch
comes on for 4 seconds.
The Timer stays on.
. The heat
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also stop
this function.
THE CHILD SAFETY DEVICE
This function prevents an accidental operation of the appliance.
Starting the child safety device
• Start the appliance with
. Do not set
the temperature.
• Touch
for 4 seconds. The symbol
comes on.
• Stop the appliance with
.
electrolux 9
Switching off the child safety device
• Start the appliance with
. Do not set
the temperature.. Touch
for 4 seccomes on.
onds. The symbol
• Stop the appliance with
.
Overriding the child safety device for
one cooking session
• Start the appliance with
. The symbol
comes on.
• Touch
for 4 seconds. Set the temperature in less than 10 seconds. You
can operate the appliance.
• When you stop the appliance with
,
the child safety device operates again.
DEACTIVATION AND ACTIVATION OF
THE SOUNDS
Deactivate the appliance.
for 3 seconds, sound operates.
Touch
, sound operates. Touch
for 3
Touch
seconds.
comes on, the sound is on.
,
comes on, the sound is off.
Touch
Touch
again to activate the sounds.
When the sounds are off, you can hear
sounds only when:
• the Minute Minder comes down
• The Count Down Timer comes down
• you put something on the control panel.
HELPFUL HINTS AND TIPS
PREPARING FOOD WITH THE TEPPAN
YAKI
You prepare the food directly on the roasting surface, with or without oil. You can also use pots or pans, but the cookware
does not heat up as quickly as it does on a
glass-ceramic hob or a gas hob
You can cook or keep warm side dishes or
sauces in pots or pans. Put them directly
on the cooking surface.
The manufacturer does not recommend
that you boil large quantities of water on the
roasting surface (e.g. for spaghetti).
Do not put cookware in the middle of
the cooking surface between the
zones, as the unevenness can make
them unsteady. Frying on the surface,
where the zones touch, can cause in
uneven browning (e. g. with pancakes).
EXAMPLES OF COOKING
APPLICATIONS
Using fats and oils
When the temperature is too high, the fat
begins to produce smoke. This temperature
is called the smoke point.
The noises are normal and are not
the result of an appliance malfunction.
Fats/Oils
Max. temperature (°C)
Smoke point (°C)
Butter
130
150
Pork fat
170
200
Beef fat
180
210
Olive oil
180
200
Sunflower oil
200
220
Groundnut oil
200
235
Coconut oil
200
240
Always preheat the appliance.
Food to be cooked
Temperature (°C)
Time / Tips
Fish and shellfish
140–160
Preheat the appliance.
Salmon fillets
160
8 minutes, turn after 4 minutes.
King prawns (without shell)
140
6 minutes, turn after 3 minutes.
10 electrolux
Food to be cooked
Temperature (°C)
Time / Tips
Shark steaks, approx. 2.5 cm
thick
160
10 minutes, turn after 5 minutes.
Sole, Müllerin Art (fried in butter)
140
8 minutes, turn after 4 minutes,
light side first.
Plaice filets
140
6 minutes, turn after 3 minutes.
Veal
140–180
Preheat the appliance.
Veal chop
180
10 minutes, turn after 5 minutes.
Veal medallions, 4 cm thick
160
10 minutes, turn after 5 minutes.
Veal steaks, 3 - 4 cm thick
160
6 minutes, turn after 3 minutes.
Veal escalopes, natural
180
5 minutes, turn after 2½ minutes.
Veal fricasee in cream sauce
180
6 minutes, turn after 3 minutes.
The meat strips must not be
stuck to each other.
Beef
160–180
Preheat the appliance.
Beef steak blau, very rare
180
2 minutes, turn after 1 minute.
Beef steak blutig, rare
180
6 minutes, turn after 3 minutes.
Beef steak rosa, medium
180
8 minutes, turn after 2 minutes.
Beef steak durch, well done
180
8 minutes, turn after 4 minutes.
Without fatty substances, the
roasting time increases by approximately 20%.
Hamburger
160
6 - 8 minutes, turn after 3 - 4
minutes.
Châteaubriand
160 then 100
Sauté the meat in oil on all
sides (turn only when the meat
does not stick to the pan). Finish off on one side for 10 minutes (100 °C).
Pork
160–180
Preheat the appliance.
Pork medallions
160
8 minutes, turn after 4 minutes
(depending on the thickness).
Pork steaks
180
8 minutes, turn after 4 minutes.
Pork escalopes
160
6 minutes, turn after 3 minutes.
Spare ribs
160
8 - 10 minutes, turn several
times.
Pork skewer
160
6 - 8 minutes, sauté well on all
sides.
Lamb
160–180
Preheat the appliance.
Lamb chops
180
10 minutes, turn after 5 minutes.
Filet of lamb
160
10 minutes, turn after 5 minutes. The filet must be fried on
both sides.
electrolux 11
Food to be cooked
Temperature (°C)
Time / Tips
Lamb steaks
160
6 - 8 minutes, turn after 3 - 4
minutes.
Poultry
140–160
Preheat the appliance.
Chicken supreme
140
8 - 10 minutes, turn after 4 - 5
minutes.
Turkey breast strips
160
6 minutes, turn several times.
Sausages
160
Preheat the appliance.
Fried egg
140
Preheat the appliance.
Crepes/Omelettes
140-160
Preheat the appliance.
Fruits
140-160
Preheat the appliance.
Vegetables
140-160
10 – 20 minutes, turn several
times.
Vegetables
140-160
10 - 15 minutes, under a cooking lid (turn halfway through).
Cooking precooked rice
140-160
10 – 15 minutes, turn several
times.
Cooking precooked noodles
140-160
15 - 20 minutes, turn halfway
through.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.
CLEANING FUNCTION
1. Touch
. Each zone is set to 80°C.
The display flashes until the temperature is 80°C. The function locks the
.
control panel, but not
2. When the temperature is 80°C, an
acoustic signal sounds, and the control
panel becomes unlocked.
3. Put ice cubes one by one on the roasting zone (you can use also cold water).
At the same time, use a spatula to remove the remaining roasting pieces
and push all pieces into the trough.
4. Dry the appliance with a clean cloth.
CLEANING WHEN THE APPLIANCE IS
COLD
1. Apply a usual cleaning agent to the
roasting surface and let it set for 5 minutes.
2. Remove the cooking residue with a
spatula.
3. Clean the appliance with a moist cloth
4. Dry the appliance with a clean cloth.
5. When the appliance is dry, rub the
roasting surface with some cooking oil.
12 electrolux
TROUBLESHOOTING
Problem
Possible cause and remedy
You cannot activate the appliance or operate it.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the control panel
• Activate the appliance again and set the heat setting in 7 seconds.
• The Child Safety Device or the lock operates. See the chapter
Daily use.
A sound operates when the appliance is deactivated.
You put something on one or more sensor fields. Remove the object from the sensor fields.
The residual heat indicator
does not come on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the service centre.
A sound operates and appliance activates and deactivates
again. After 5 seconds one
more sound operates.
You put something
. Remove the object from the sensor field.
comes on
The Automatic Switch Off operates. Deactivate the appliance and
activate it again.
and number come on.
There is an error in the appliance.
Disconnect the fuse from the electrical system of the house in order to disconnect the appliance from the electrical supply for
some time. Connect again. If
comes on again, speak to the
service centre.
There is no signal when you
touch the panel sensor fields.
The signals are deactivated.
Activate the signals (see OffSound Control ).
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the Customer Care Department. Give the
data from the rating plate, three-digit-letter
code for the glass ceramic (it is in the corner of the cooking surface) and an error
message that comes on.
If you operated the appliance incorrectly,
the servicing by a customer service technician or dealer will not be free of charge,
even during the warranty period. The instructions about the customer service and
conditions of guarantee are in the guarantee booklet.
INSTALLATION
Warning! Refer to the Safety chapters.
Before the installation, note down
the serial number (Ser. Nr.) from the
rating plate.The rating plate of the
appliance is on its lower casing.
ELECTROLUX
Made in Switzerland
PNC: 941 560 814 / 00
Serie:
220-240 V 50/60 Hz
2,8 kW / Induction 2,8 kW
TY38TSICN
Typ: 55TEP00AU
Warning! During installation in
combustible matter, NIN SEV 1000 and
fire protection guidelines and
regulations of the Association of
Cantonal Fire Insurance shall be strictly
adhered to.
BUILT-IN APPLIANCES
• Only use the built-in appliances after you
assemble the appliance into correct builtin units and work surfaces that align to
the standards.
CONNECTION CABLE
• The appliance is supplied with the connection cable.
electrolux 13
• Replace the damaged mains cable with a
special cable (type H05VV-F or higher).
Speak to your local Service Centre.
ELECTRICAL CONNECTION
• Install the appliance with a socket supply
line. If there is no socket supply line, the
fixed home electrical system must include
an isolating device with at least a 3 mmcontact separation to enable a simultaneous and all-pole cut off from the mains
(according to NIN SEV 1000).
• You can use the fixing clamps supplied
with the appliance to install it in a worktop with a minimum thickness of 42 mm.
With thinner worktops you must use a
spacer (not supplied with the appliance).
TO ATTACH THE SEAL.
• If installing proud of the work surface, use
the sealing tape with dimensions 12x2
mm.
• Clean the worktop in the area of the cut
out section.
• Cut the one-sided self-adhesive sealing
tape supplied into four parts according to
the edge length of the cut-out and stick
to the worktop along the edge of the cutout. In doing so, the sealing tape should
ASSEMBLY
min.
500mm
min.
50mm
min.
2mm
protrude by approx. 3 mm over the edge
of the appliance on all sides.
• Do not stretch the sealing tapes when
sticking. Do not stick the ends on top of
each other, these should be pushed
against each other.
• After fitting the Teppan Yaki (using the
provided fitting material), the overlaying
sealing tape must be cut away on all
sides using a sharp knife. Take care not
to damage the worktop.
TO ATTACH THE SEAL TO THE
RABBET
• Clean the rabbet in the work surface.
• Bond the seal stripe supplied on the upper surface of the rabbet along the edges
of the cut out section.
• Cut the seal stripe into four pieces in relation to the length of the edges of the rabbet.
• For the four corners of the rabbet the
ends of the seal stripes must be cut into
mitres. Do not bond the ends over one
another.
• Bond the seal stripe flush into the corner
of the rabbet. Make sure that no silicon
compound can get below the appliance
when grouting.
14 electrolux
B
A
min. 2 mm
< 20 mm
B
A
min. 2 mm
> 20 mm
min. 500 mm
B
A
12 mm 57 mm
28 mm 41 mm
38 mm 31 mm
min
30 mm
min. 500 mm
B
A
12 mm 57 mm
28 mm 41 mm
38 mm 31 mm
R 5mm
55mm
490+1mm 360+1mm
50 mm
50 mm
min.
12 mm
min.
2 mm
min.
38 mm
min.
2 mm
electrolux 15
BUILT-IN INSTALLATION
R10mm
min.
12 mm
R5mm
8mm
min.
2 mm
13mm
55mm
360+1
mm
490+1
516+1mm
mm
386+1mm
min.
38 mm
min.
2 mm
ENVIRONMENT CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
PACKAGING MATERIAL
The packaging materials are friendly to
the environment and can be recycled.
The plastic components are identified
by marking: >PE<,>PS<, etc. Discard
the packaging materials as household
waste at the waste disposal facilities in
your municipality.
www.electrolux.com/shop
892952050-B-042013