Aeg-Electrolux HM634200MB User Manual

Add to my manuals
16 Pages

advertisement

Aeg-Electrolux HM634200MB User Manual | Manualzz
HM634200MB
User manual
Ceramic glass induction
hob
2
Contents
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we recommend
you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
Contents
Safety information
2
Installation
Description of the appliance
3
7
Operating the appliance
8
Automatic Switch Off
8
Switching the Power function on and off
9
Using the Timer
10
Starting the STOP+GO
11
Locking / unlocking the control panel
11
The child safety device
11
OffSound Control (Switching off and on the
sounds)
11
Helpful hints and tips
12
Care and cleaning
13
What to do if...
Environment concerns
Packaging material
13
14
14
Subject to change without notice
Safety information
For your safety and correct operation of the appliance, read this manual carefully before
installation and use. Always keep these instructions with the appliance even if you move
or sell it. Users must fully know the operation and safety features of the appliance.
General safety
WARNING!
Persons (including children) with reduced physical sensory, mental capabilities or lack of
experience and knowledge must not use the appliance. They must have supervision or
instruction for the operation of the appliance by a person responsible for their safety.
Child safety
• Only adults can use this appliance. Children must get supervision to make sure that they
do not play with the appliance.
• Keep all packaging away from children. There is a risk of suffocation.
• Keep children away from the appliance when it is on.
WARNING!
Start the child safety device to prevent small children and pets from an accidental activation
of the appliance.
Installation
3
Safety during operation
• Remove all packaging, stickers and layers from the appliance before the first use.
• Set the cooking zones to "off" after each use.
• Risk of burns! Do not put metallic objects, for example cutlery or saucepan lids, on the
cooking surface, as they can become hot.
• Users with an implanted pacemaker must keep their upper body minimum 30 cm from
induction cooking zones that are switched on.
WARNING!
Fire danger! Overheated fats and oils can catch fire very quickly.
Correct operation
•
•
•
•
Always monitor the appliance during operation.
Only use the appliance for domestic cooking tasks!
Do not use the appliance as a work or a storage surface.
Do not put or keep very flammable liquids and materials, or fusible objects (made of
plastic or aluminium) on or near the appliance.
• Be careful when you connect the appliance to the near sockets. Do not let electricity
bonds touch the appliance or hot cookware. Do not let electricity bonds tangle.
How to prevent a damage to the appliance
• If the objects or cookware fall on the glass ceramic, the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the
glass ceramic if you move them on the surface.
• Do not let cookware boil dry to prevent the damage to cookware and glass ceramics.
• Do not use the cooking zones with empty cookware or without cookware.
• Do not cover the parts of the appliance with aluminium foil.
• Do not cover the ventilation space of 5 mm between the worktop and front of the unit
below it.
WARNING!
If there is a crack on the surface, disconnect power supply to prevent the electric
shock.
Installation
Before the installation , note down this data from the rating plate:
• Model description (Modell)................
• Product number (Prod. Nr.) ............. ....
• Serial number (Ser. Nr.) ...............
You find the rating plate of the appliance on its lower casing.
949 593 220 00
HM634200M-B
58 GAD C7 AU 220-240 V 50-60-Hz Induction 7,4 kW
7,4 kW
AEG-ELECTROLUX
4
Installation
Safety instructions
WARNING!
You must read these!
Fully obey the laws, ordinances, directives and standards in force in the country where you
use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!
Only a qualified electrician must install the appliance!
Keep the minimum distances to other appliances and units!
Install anti-shock protection, for example install the drawers only with a protective floor
directly below the appliance!
Protect the cut surfaces of the worktop against moisture with a correct sealant!
Seal the appliance to the work top with no space left with a correct sealant!
Protect the bottom of the appliance from steam and moisture, e.g. from a dishwasher or
oven!
Do not install the appliance adjacent to doors and below windows! If not, hot cookware
can be hit off the hob when you open doors or windows.
WARNING!
Risk of injury from electrical current.
The combination appliance is live.
• Observe electrical safety rules.
• Rated voltage of the combined appliances must match.
• Fit plug and socket connections together properly.
• Install correctly to give anti-shock protection.
• Loose and incorrect plug and socket connections can make the terminal become too hot.
• A qualified electrician must install the clamping connections correctly.
The appliance must have the electrical installation which lets you disconnect the appliance
from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
Assembly
min. 500 mm
min.
50 mm
600
min.
50 mm
560+1
min.
5 mm
490+1
R5
Installation
min.
38 mm
min.
5 mm
5
6
Installation
Removal
Description of the appliance
7
Description of the appliance
Cooking surface layout
1
2
6
mm
180 mm
mm
210
180 mm
140
3
5
4
1 Induction cooking zone 1400 W, with
the Power function 2500 W
2 Induction cooking zone 1800 W, with
the Power function 2800 W
3 Induction cooking zone 1800 W, with
Power function 2800 W
4 Control panel
5 Induction cooking zone 2300 W, with
the Power function 3700 W
6 Steam outlet
Control panel layout
1
2
3
4
7
6
5
Use the sensor fields to operate the appliance.
sensor field
1
the timer display
function
shows the time in minutes
selects the cooking zone
2
3
/
increases or decreases the time
4
a lock
starts and stops the key lock or child lock
5
activates power function
6
starts and stops STOP+GO
7
a heat setting display
shows the heat setting
8
Operating the appliance
Heat setting displays
Displays show which functions operate
Display
Description
The cooking zone is off
The cooking zone operates
-
Keep Warm
The automatic heat-up function is on
Power function
+ digit
There is a malfunction
/
OptiHeat Control (3 step Residual heat indicator): still cooking / keep
warm / residual heat
/
Lock/Child safety function is on
Cookware unsuitable or too small or no cookware on the heating zone
The automatic switch off is on
OptiHeat Control (3 step Residual heat indicator)
WARNING!
\ \ Risk of burns from residual heat!
OptiHeat Control indicates the level of the residual heat. The induction cooking zones make
the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic
is slightly heated by the residual heat of the cookware.
Operating the appliance
Use the induction cooking zones with suitable cookware.
You operate the hob with the knobs of the oven and control panel of the hob. The
Operating Instructions chapter for the oven tells how to operate the knobs.
When a cooking zone operates, it hums for a short time. This is typical of all ceramic glass
cooking zones and does not show that the appliance operates incorrectly.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off .
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.
The sound operates until you remove the object.
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, the
cooking zone must be cool.
Operating the appliance
9
• you use incorrect cookware. comes on in the display and after 2 minutes the cooking
zone stops automatically.
• you do not stop a cooking zone or change the heat setting. After some time comes
on and the hob stops. See the table.
Automatic Switch Off times
Heat setting
Stops after
6 hours
-
-
5 hours
4 hours
1.5 hours
The automatic heat up
Automatic heat up function sets the highest heat setting for some time, and then decreases
to the necessary level. To switch it on turn the cooking zone knob to the right until you see
in the display. After that set the heat setting immediately.
11
10
9
8
7
6
5
4
3
2
1
0
1
2 2. 3 3. 4 4. 5 5. 6 6. 7
8
Switching the Power function on and off
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After that the induction cooking zone automatically switches back to heat setting 9. To switch on, select heat setting with knobs, than
touch , comes on. To switch off, change the heat setting.
10
Operating the appliance
Power management
The power management divides the power between two cooking zones in a pair (see the figure).
The power function increases the power to the
maximum level for one cooking zone in the pair
and automatically decreases in the second cooking zone to a lower power level. The display for
the reduced zone alternates.
Using the Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for one cooking
session.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• Selection of the cooking zone: touch again and again until the indicator of a
necessary cooking zone comes on.
• Starting the Count Down Timer: touch of the timer to set the time ( 00 - 99
minutes). When the indicator of the cooking zone flashes slower, the time counts down.
• Checking the remaining time: select the cooking zone with . The indicator of the
cooking zone flashes faster. Display shows the remaining time.
• Changing the Count Down Timer: select the cooking zone with touch or .
• Stopping the timer: select the cooking zone with . Touch . The remaining time
counts backwards to 00 . The indicator of the cooking zone goes out. To switch off You
can also touch and at the same time.
When the time elapses, the sound operates and 00 flashes. The cooking zone switches
off.
• Stopping the sound: touch
CountUp Timer (Count up timer)
Use the CountUp Timer to monitor how long the cooking zone operates.
• Selection of the cooking zone (if more than 1 cooking zone operate): touch
again and again until the indicator of a necessary cooking zone comes on.
• Starting the CountUp Timer: touch of the timer comes on. When the indicator
of the cooking zone flashes slower, the time counts up, display switches between and
time elapsed (minutes)
• Checking the elapsed time: select the cooking zone with . The indicator of the
cooking zone flashes faster. Display shows the elapsed time.
• Stopping the CountUp Timer: select the cooking zone with and touch or to
switch off the timer. The indicator of the cooking zone goes out.
Operating the appliance
11
Minute Minder
You can use the timer as a Minute Minder while cooking zones do not operate. Touch
. Touch or of the timer to select the time. When the time elapses, the sound operates
and 00 flashes.
Starting the STOP+GO
The
function sets all cooking zones that operate to a keep warm setting.
• Touch
to start this function. The symbol comes on.
• Touch
to stop this function. The heat setting that you set before comes on.
does not stop the timer function.
fully locks the control panel.
Locking / unlocking the control panel
You can lock the control panel. You can stop the appliance.
Touch the symbol . The symbol comes on for 4 seconds.
The Timer still operates.
Touch the symbol to switch off this function. The heat setting that you set before comes
on.
When you switch off the appliance, you also switch off this function.
The child safety device
This function prevents an accidental operation of the hob.
Starting the child safety device
• Do not set the heat settings .
• Touch for 4 seconds. The symbol comes on.
Switching off the child safety device
• Set the heat settings . The symbol comes on. Touch until the symbol comes
on.
.
• Touch
Overriding the child safety device for one cooking session
• Set the heat settings . The symbol comes on. Touch until the symbol comes
on. Set the heat setting in less than 10 seconds. You can operate the hob.
• The child safety stays active after switch off the hob.
OffSound Control (Switching off and on the sounds)
Switching off the sounds
Switch off the appliance.
Touch for 3 seconds, sound operates. Touch , sound operates. Touch for 3 seconds.
comes on, the appliance is in standard mode. Touch , comes on, the sound is off.
When the sound is off, you hear only when Minute Minder or Count Down Timer come
down or when you cover the control panel.
Switching on the sounds
Switch off the appliance.
Touch for 3 seconds. Touch . Touch for 3 seconds. . comes on, because the
sound is off. Touch , comes on, the appliance is in standard mode. The sound is on.
12
Helpful hints and tips
Helpful hints and tips
Cookware for induction cooking zones
In induction cooking a powerful electromagnetic field generates an almost instant heat
inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless steel, a multi-layer bottom (marked
as correct by a manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is correct for an induction hob if …
• ... some water boils very quickly on a zone set to the highest heat setting..
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and flat as possible.
Cookware dimensions : induction cooking zones adapt to the dimension of the bottom
of the cookware automatically to some limit. But, the magnetic part of the bottom of the
cookware must have a minimum diameter of approximately 3/4 of the cooking zones.
Energy saving
•
•
•
•
If possible, always put the lids on the cookware.
Put cookware on a cooking zone before you start it.
Stop the cooking zones before the end of the cooking time to use residual heat.
The bottom of pans and cooking zones must have the same dimension.
Öko Timer (Eco Timer)
To save the energy, the heater of the cooking zone switches itself off earlier than count
down timer signal. The heating time reduction depends on cooking level and cooking time.
Information on acrylamides
According to the newest scientific knowledge, if you brown food (specially the one which
contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at
the lowest temperatures and do not brown food too much.
Operating noises
If you can hear
• cracking noise: cookware is made of different materials (Sandwich construction).
• whistling: you use one or more cooking zones with high power levels and the cookware
is made of different materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to any defects.
Care and cleaning
13
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
WARNING!
Sharp objects and abrasive cleaning agents will damage the appliance.
For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.
Scratches or dark stains on the glass ceramic have no effect on how the appliance operates.
Removing the dirt:
1. – Remove immediately: melting plastic, plastic foil, and food containing sugar. Use
a special glass ceramic scraper. Put the scraper on the glass ceramic surface at an
acute angle and slide the blade on the surface.
– Stop the appliance and let it cool down before you clean: limescale rings, water
rings, fat stains, shiny metallic discolorations. Use a special cleaner for glass ceramic
or stainless steel.
2. Clean the appliance with a damp cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
What to do if...
Problem
Possible cause and remedy
You cannot start the appliance
or operate it.
• Start the appliance again and set the heat setting in 10 seconds.
• The child safety device operates
. Stop child safety device.
See the section “Child safety device”.
• "STOP+GO" operates. Stop function "STOP+GO". See section
"STOP+GO"
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel
A sound operates when the ap- You covered one or more sensor fields. Uncover the sensor fields.
pliance is off.
The residual heat indicator does The cooking zone is not hot because it operated only for a short
not come on.
time. If the cooking zone is supposed to be hot, speak to the after
sales service.
Heat setting alternates
The Power management is active. See the section Power management.
A sound operates and appliance Uncover the sensor field.
starts and stops again. After 5
seconds one more sound operates.
14
Environment concerns
Problem
Possible cause and remedy
comes on
• The automatic switch-off operates. Stop the appliance and
start it again.
Overheating protection for the cooking zone operates. Switch
off the cooking zone. Switch on the cooking zone again.
comes on
• Not correct cookware. Use the correct cookware.
• No cookware on the cooking zone. Put cookware on the cooking zone.
• The diameter of the bottom of the cookware is too small for
the cooking zone. Move cookware to a smaller cooking zone.
and number come on.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If
comes on again, speak to the after sales
service.
come on
The cooking zone is overheated e.g. pot boiled out
Switch the appliance off. Remove the pot. Wait approx. 30 seconds. Switch the appliance on
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
Customer Care Department. Give the data from the rating plate, three-digit-letter code for
the glass ceramic (it is in the corner of the cooking surface) and an error message that
comes on.
If you operated the appliance incorrectly, the servicing by a customer service technician or
dealer will not be free of charge, even during the warranty period. The instructions about
the customer service and conditions of guarantee are in the guarantee booklet.
Environment concerns
The symbol
on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact
your local council, your household waste disposal service or the shop where you purchased
the product.
Packaging material
The packaging materials are friendly to the environment and can be recycled. The plastic
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as
household waste at the waste disposal facilities in your municipality.
15
www.electrolux.com
892935927-A-102009
To buy accessories, consumables and spare parts at our online shop please visit:
www.aeg-electrolux.co.uk

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement