Aeg-Electrolux | BE7614000M | User manual | Aeg-Electrolux BE7614000M User Manual

BE7614000
BE7714000
EN OVEN
USER MANUAL
2
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have
created it to give you impeccable performance for many
years, with innovative technologies that help make life
simpler – features you might not find on ordinary
appliances. Please spend a few minutes reading to get the
very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to
keep all your AEG appliances looking spotless and
working perfectly. Along with a wide range of accessories
designed and built to the high quality standards you
would expect, from specialist cookware to cutlery baskets,
from bottle holders to delicate laundry bags…
Visit the webshop at:
www.aeg-electrolux.com/shop
Contents
3
CONTENTS
4
8
9
11
12
14
16
17
19
21
26
27
29
Safety information
Product description
Control panel
Before first use
Daily use
Clock functions
Automatic programmes
Using the accessories
Additional functions
Care and cleaning
What to do if…
Installation
Environment concerns
The following symbols are used in this user
manual:
Important information concerning your
personal safety and information on how to
avoid damaging the appliance.
General information and tips
Environmental information
Subject to change without notice
4
Safety information
SAFETY INFORMATION
Before the installation and use, read this manual carefully:
• For your personal safety and the safety of your property
• For the respect of the environment
• For the correct operation of the appliance.
Always keep these instructions with the appliance also if you move or sell it.
The manufacturer is not responsible if incorrect installation or use results in damage.
Children and vulnerable people safety
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in safe
way and understand the hazards involved. Children shall not play with the appliance.
• Keep all packaging away from children. There is the risk of suffocation or physical injury.
• Keep children and animals away from the appliance when the door is open or the appliance is in operation. There is the risk of injury or other permanent disability.
• If the appliance has Child Lock or Key Lock (Control Lock) function, use it. It prevents
children and animals from accidental operation of the appliance.
General safety
• Do not change the specifications of this appliance. There is the risk of injury and damage
to the appliance.
• Do not let the appliance stay unattended during operation.
• Switch off the appliance after each use.
Installation
• Only an approved electrician can install and connect the appliance. Contact an approved
service centre. This is to prevent the risks of structural damage or physical injury.
• Make sure that the appliance is not damaged because of transport. Do not connect a
damaged appliance. If necessary, contact the supplier.
• Remove all packaging, stickers and layers from the appliance before first use. Do not remove the rating plate. It can invalidate the guarantee.
• Fully obey the laws, ordinances, directives and standards in force in the country where
you use the appliance (safety regulations, recycling regulations, electrical or gas safety
rules etc.).
• Make sure that the appliance is disconnected from the power supply during the installation.
• Be careful when you move the appliance. The appliance is heavy. Always use safety
gloves. Do not pull the appliance by the handle.
• The electrical installation must have an isolation device which lets you disconnect the
appliance from the mains at all poles. The isolation device must have a contact opening
width of minimum 3 mm.
Safety information
5
• You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
• The shock protection parts must be fixed in such a way that they cannot be undone
without tools.
• Some parts of the appliance carry current. Close the appliance with furniture and make
sure that there are no free spaces. It prevents electrical shock because you cannot accidentally touch dangerous parts.
• Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable.
• Make sure that the appliance is installed below and adjacent safe structures.
• Keep the minimum distances to the other appliances and units.
• Install the appliance with its back and one side close to the higher appliance. The other
side must be close to appliance with the same height.
• The appliance cannot be positioned on a base.
• Built in ovens and built in cooking surfaces are attached with special connection system.
To prevent damage to the appliance, only use an appliance with the appliances from the
same manufacturer.
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical data on the rating plate agree with your domestic power
supply.
• Information on the voltage is on the rating plate.
• Always use a correctly installed shockproof socket.
• When you connect electrical appliances to mains sockets, do not let cables touch or
come near the hot appliance door.
• Do not use multi-way plugs, connectors and extension cables. There is the risk of fire.
• Do not replace or change the mains cable. Contact the service centre.
• Make sure not to squash or cause damage to the mains plug (if applicable) and cable
behind the appliance.
• Make sure that the mains connection is accessible after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug – if
applicable.
Use
• The appliance is only for domestic use. Do not use the appliance for commercial and industrial use.
• Only use the appliance for domestic cooking tasks. This is to prevent physical injury to
persons or prevent damage to property.
• Do not use the appliance as a work surface or storage surface.
• Do not put flammable products or items that are wet with flammable products, and/or
fusible objects (made of plastic or aluminium) in, near or on the appliance. There is the
risk of explosion or fire.
6
Safety information
• The interior of the appliance becomes hot during use. There is the risk of burns. Use
gloves when you insert or remove the accessories or pots.
• Be careful when you remove or install the accessories to prevent damage to the oven
enamel.
• Always stay away from the appliance when you open the door while the appliance is in
operation. Hot steam can release. There is the risk of skin burns.
• Discoloration of the enamel has no effect on the performance of the appliance so it is
not a defect in the sense of the warranty law.
• To prevent damage or discoloration to the enamel:
– do not put any objects directly on the appliance floor and do not cover it with aluminium foil;
– do not put hot water directly into the appliance;
– do not keep moist dishes and food in the appliance after you finish the cooking.
• Do not use this appliance if it is in contact with water. Do not operate the appliance with
wet hands.
• Do not apply pressure on the open door.
• Always close the appliance door when you cook, even while grilling.
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the appliance from the
power supply.
• Before maintenance, make sure that the appliance is cold. There is the risk of burns.
There is the risk that the glass panels can break.
• Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a
fire.
• Regular cleaning prevents the surface material from deteriorating
• Use a deep baking tray for very moist cakes to prevent that fruit juices cause stains that
can be permanent.
• For your personal safety and the safety of your property, only clean the appliance with
water and a soap. Do not use flammable products or products that can cause corrosion.
• Do not clean the appliance with steam cleaners, high-pressure cleaners, sharp objects,
abrasive cleaning agents, abrasive sponges and stain removers
• If you use an oven spray, follow the instructions from the manufacturer.
• Do not clean the glass door with abrasive cleaning agents or metal scraper. Heat resistant surface of the inner glass can break and shatter.
• When the door glass panels are damaged they become weak and can break. You must
replace them. Contact the service centre.
• Be careful when you remove the door from the appliance. The door is heavy!
• Do not clean catalytic enamel (if applicable).
Risk of fire
• Open the door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air. There is the risk of fire.
Safety information
7
• Do not let sparks or open flames come near the appliance when you open the door.
• Do not put flammable products or items that are wet with flammable products, and/or
fusible objects (made of plastic or aluminium) in, near or on the appliance.
Oven lamp
• Bulb lamps used in this appliance are special lamps selected for household appliances use
only. They cannot be used for the full or partial illumination of a household room.
• If it becomes necessary to replace the lamp use one of the same power and specifically
designed for household appliances only.
• Disconnect the appliance from the power supply before the replacement of the oven
lamp. There is the risk of electrical shock.
Service centre
• Only an approved engineer can repair or work on the appliance. Contact an approved
service centre.
• Use only original spare parts.
Disposal of the appliance
• To prevent the risk of physical injury or damage
– Disconnect the appliance from the power supply.
– Cut off the mains cable and discard it.
– Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.
8
Product description
PRODUCT DESCRIPTION
General overview
1
2
3
7
4
5
6
1
2
3
4
5
6
7
Control panel
Electronic programmer
Grill
Oven lamp
Fan
Rating plate
Socket for the core temperature sensor
Oven accessories
• Wire shelf
For cookware, cake tins, roasts.
• Flat baking tray
For cakes and biscuits.
• Deep roasting pan
To bake and roast or as pan to collect fat.
• Core Temperature Sensor
To measure how far the food is cooked.
• Telescopic runners
To put the shelves or trays on it.
Control panel
9
CONTROL PANEL
Electronic programmer
1
2
3
4
5
6
7
8
9
10
Use the sensor fields to operate the appliance.
Sensor Field
Function
-
DISPLAY
Shows the current settings of the appliance.
2
ON/OFF
To activate and deactivate the appliance.
3
OPTIONS
To set an oven function or programme.
Straight access to the oven function when the
appliance is off.
4
MY FAVOURITE PROGRAMME
You can store your favourite programme. Use it
to access your favourite programme directly, also
when the appliance is off.
5
TEMPERATURE / FAST
HEAT UP
To set and examine cavity temperature or core
temperature sensor temperature. If you press it
and hold for three seconds, it turns Fast heat up
function ON and OFF.
Straight access to the temperature setting of
the first oven function when the appliance is
off.
6
UP, DOWN
To choose an oven function, clock function and
to set the minute minder, temperature or time of
day.
7
OK
8
OVEN LIGHT
9
CLOCK
To set the clock function.
10
MINUTE MINDER
To set the minute minder.
1
Description
To confirms the selection or setting.
To set the oven lamp on or off.
10
Control panel
Display
1
2
7
1
2
3
4
5
6
7
3
6
5
4
Oven function symbol
Temperature/Time display
Clock/Residual heat display (also Minute minder and Time of day)
Residual heat indicator
Indicators for the clock functions (refer to the table "Clock functions")
Heat up indicator
Number of oven function/programme
Other indicators of display
Symbols
/
/
Name
Description
Options
You can choose an oven function.
Automatic programme
You can choose an oven programme.
My favourite programme
The favourite programme operates.
kgr/gr
An oven programme with weight input operates.
h/min
A clock function operates.
Temperature / fast heat up
The function operates.
Temperature
You can examine or change the temperature.
Core temperature sensor
The core temperature sensor is in the core temperature
sensor socket.
Oven light
The light is off.
Minute minder
The minute minder function operates.
Heat up indicator
If you set an oven function, the bars in the display come on one by one. The bars show
that the temperature in the appliance increases or decreases.
When the appliance is at the set temperature, an acoustic signal sounds and the Heat up
indicator goes off the display.
Before first use
11
Residual heat indicator
Display shows the residual heat indicator (residual heat symbol) after end of every cooking
sessions when the temperature inside oven cavity is more then 40°C. Display also shows the
oven temperature.
BEFORE FIRST USE
WARNING!
Refer to "Safety information" chapter.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
First connection to the mains
After first connection to the mains all symbols in the display are on for some seconds. For
the subsequent few seconds the display shows software version.
First setting the time of day
After the software version goes off, the display shows "h" and "12:00".
Setting the time of day:
or
to set hours.
1. Touch
or .
2. Touch
or
to set minutes.
3. Touch
or .
4. Touch
The Temperature/Time display shows new time.
Changing the time of day
You can change the time of day only if the appliance is off.
Touch . flashes in the display. To set new time of day use the above procedure.
Pre-heating
1. Set function and maximum temperature.
2. Let the appliance operate without the food for approximately 1 hour.
3. Set function and maximum temperature.
4. Let the appliance operate without the food for approximately 10 minutes.
5. Set function and maximum temperature.
6. Let the appliance operate without the food for approximately 10 minutes.
This is to burn off the residue in the appliance. The accessories can become more hot than
usually. When you pre-heat the appliance for the first time, the appliance can make an
odour and smoke. This is the usual effect. Make sure the airflow is sufficient.
12
Daily use
DAILY USE
WARNING!
Refer to "Safety information" chapter.
To operate the appliance you can use:
• manual mode -to set an oven function, the temperature and the cooking time manually.
• automatic programmes -to prepare a dish when you do not have a knowledge or experience in cooking.
Setting the oven function
1. Touch .
The display shows a preset temperature, symbol and number of the oven function.
flashes in the display.
or
to set an oven function.
2. Touch
or the appliance starts automatically after five seconds.
3. Touch
If you activate the appliance with or and do not set any oven function or programme
the appliance will deactivate automatically after 20 seconds.
Oven function
Application
1
True Fan Cooking
2
Pizza Setting
3
Slow Cook
4
Conventional
Cooking
To bake and roast food on one shelf position.
5
Turbo Grilling
To roast larger meat joints or poultry with bones on one
shelf position. Also to gratinate and to brown.
6
Fast Grilling
7
Grilling
8
Keep Warm
To keep the food warm.
The set temperature is 80 °C and you cannot change it.
9
Defrost
To defrost frozen food.
The set temperature is 30 °C and you cannot change it.
10
Bottom Heat
To bake cakes with a crispy base, and to preserve food.
To bake maximum on two shelf positions at the same time.
Decrease the oven temperatures (20-40 °C) compared with
Conventional. And to dry food.
To bake on one shelf position food with a more intensive
browning and a crispy base. Decrease the oven temperatures
(20-40 °C) compared with Conventional cooking.
To prepare very lean, tender roasted food.
You can set the temperature between 80 °C -150 °C.
To grill flat food in large quantities. To toast bread.
To grill flat food in the middle of the grill. To toast bread.
13
Daily use
Changing the oven temperature
Touch
/
to change the temperature in steps of 5 °C.
When the appliance is at the set temperature, an acoustic signal operates three times and
the Heat up indicator goes off.
Examining the oven temperature
You can examine the temperature in the appliance when the function or programme operates.
.
1. Touch
The Temperature/Time display shows the temperature in the appliance.
If you want to change the oven temperature, touch
one more time and use
or
.
to go back to the set temperature or the display will show it automatically
2. Touch
after five seconds.
Fast heat up function
The fast heat up function decreases the heat up time.
Do not put food in the oven when the fast heat up function operates.
for more then three seconds.
Activating the fast heat up function : Touch and hold
If you activate the fast heat up function, the bars on the display flash one by one to
show that the function operates.
The fast heat up does not start with automatic programmes.
Error code
If some parameters are not correct, the control unit stops the functions which operate and
the display shows the related error code. Refer to "What to do if" chapter.
In case of a power cut, most of the settings are cancelled. Reset the settings when the power supply is restored.
Energy saving
The appliance has same features that help you save energy during everyday cooking:
• Residual heat:
– the oven function or programme operates: the heating elements are deactivated 10%
time earlier (the lamp and fan continue to operate). The condition: the cooking time is
longer then 30 minutes or you use the clock functions (Duration, End, Time delay).
– the oven is off: you can use the heat to keep the food warm. The indication: the clock/
Residual heat display shows the remaining temperature, the bars show the decreasing
temperature.
• Oven lamp off - touch to deactivate the oven lamp during cooking;
at the same time
• Display off - if necessary, deactivate the appliance. Touch and
until the display goes out (or on).
14
Clock functions
CLOCK FUNCTIONS
SYMBOL
FUNCTION
DESCRIPTION
COUNT UP TIMER
To set count up. It shows how long the appliance operates.
This function has no effect on the operation of the appliance.
TIME OF DAY
To examine the time of day. For changing the time of day refer to 'Setting the time of day'.
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates. You can use Duration
and End at the same time (Time delay), if the appliance is to
be activate and deactivate automatically later.
SET+GO
To start the appliance with necessary settings with only one
touch of the sensor field, any time later.
Count Up Timer
Use the Count Up Timer to monitor how long the appliance operates. It is on immediately
when the appliance starts to heat.
Reset the Count Up Timer: touch again and again until flashes in the display. Touch
until the display shows "00:00" and the Count Up Timer starts to count up again.
You can not use Count Up Timer when Duration or End is set.
Setting the DURATION
1. Activate the appliance and set an oven function and temperature.
2. Touch again and again until the display shows .
flashes in the display.
or
to set minutes for DURA3. Use
TION.
to confirm
4. Touch
or
to set hours for DURATION. After 5 seconds the appliance starts.
5. Use
If you touch or
during setting hours for DURATION, the appliance goes to setting of
the END function.
6. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
Touch any sensor field or open the oven door to stop an acoustic signal.
7. Deactivate the appliance.
Setting the END
1. Activate the appliance and set an oven function and temperature.
2. Touch again and again until the display shows .
Clock functions
flashes in the display.
or
to set END (first you set minutes and then hours) and
or
3. Use
firm.
4. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
5. Touch any sensor field or open the oven door to stop an acoustic signal.
6. Deactivate the appliance.
15
to con-
Setting the SET+GO
To start of the appliance with necessary settings with only one touch of the sensor field,
any time later.
1. Set an oven function (or programme) and temperature (refer to "Setting the oven function" and "Changing the oven temperature").
2. Set DURATION (refer to "Setting the DURATION").
3. Touch again and again until will flash in the display.
to set the SET+GO function.
4. Touch
The display shows and with a dot. This dot shows which clock function is activated.
5. Touch any sensor field (apart from ON/OFF) to start the SET+GO function.
You can use SET+GO function only if DURATION is set.
Setting the Time delay function
DURATION and END can be used at the same time, if the oven is to be switched on
and off automatically later. In this case first set DURATION and then END function
(refer to "Setting the DURATION" and "Setting the END ").
When the Time delay function is activated the display shows static symbol of the oven
function, with a dot and . The dot shows which clock function is on in the Clock/
Residual heat display.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This function has no
effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the
appliance is off.
1. Touch .
and "00" flash in the display.
or
to set MINUTE MINDER.
2. Use
First you set seconds and then minutes
and hours.
or the MINUTE MINDER starts
3. Touch
automatically after five seconds.
4. When set time ends, an acoustic signal
operates for two minutes and "00:00" and
flash in the display.
16
Automatic programmes
5. Touch any sensor field or open the oven door to stop an acoustic signal.
AUTOMATIC PROGRAMMES
WARNING!
Refer to "Safety information" chapter.
There are 20 automatic programmes and recipes. Use an automatic programme or recipe
when you do not have a knowledge or experience how to prepare a dish. You can find the
recipes for the automatic programmes in the "Recipe book".
There are three types of automatic programmes:
• Automatic recipes;
• Automatic programmes with weight input;
• Automatic programmes with core temperature sensor;
Automatic recipes
Setting an automatic recipe:
1. Touch two times until the display shows .
The display shows symbol and number of the automatic programme.
or
to choose the automatic recipes.
2. Touch
or the automatic recipe activates automatically after five seconds.
3. Touch
4. When set time ends, an acoustic signal operates for two minutes. Symbol flashes.
The appliance deactivates.
5. Touch any sensor field or open the oven door to stop an acoustic signal.
Automatic programmes with weight input
If you set the weight of the meat, the appliance calculates the roasting time.
1. Touch again and again until the display shows .
or
to set the weight programme (refer to "Recipe book").
2. Touch
The display shows: cooking time, duration symbol , a default weight, a unit of measurement (kg, g).
or the settings save automatically after five seconds.
3. Touch
4. The appliance starts. A symbol of the weight unit flashes in the display. During this time
or
. Touch
.
you can change the default weight value with
5. When set time ends, an acoustic signal operates for two minutes. flashes.
The appliance deactivates.
6. Touch any sensor field or open the oven door to stop an acoustic signal.
Automatic programmes with core temperature sensor
The core temperature of the food is default and fixed in programmes with core temperature
sensor. The programme ends when the appliance is at the set core temperature.
1. Touch again and again until the display shows .
Using the accessories
17
2. Install the core temperature sensor (refer to "The core temperature sensor").
or
to set the core temperature sensor programme.
3. Touch
When a core temperature sensor programme is set, the display shows the cooking time,
and
.
or the settings save automatically after five seconds.
4. Touch
5. When the food is at the set core temperature, the core temperature and
flash. An
acoustic signal sounds for two minutes.
The appliance deactivates.
6. Touch any sensor field or open the oven door to stop an acoustic signal.
My favourite programme function
Use this function to save your favourite settings of temperature and time for oven function
or programme.
1. Set the temperature and time for an oven function or programme.
2. Touch and hold for more then three seconds.
An acoustic signal sounds.
3. Deactivate the appliance.
Using the my favourite programme function:
• Activating the my favourite programme function: Touch . The appliance activates
your favourite programme.
• Deactivating the my favourite programme function: Touch .
When the my favourite programme function operates, you can change the time and temperature.
USING THE ACCESSORIES
WARNING!
Refer to "Safety information" chapter.
The core temperature sensor
The core temperature sensor measures the core temperature of the meat. When the meat is
at the set temperature, the cooking programme deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table for roasting in the recipe book.
• The core temperature: refer to the table for the core temperature sensor in the recipe
book.
Only use the core temperature sensor supplied or original replacement parts.
1. Activate the appliance.
18
Using the accessories
2. Put the point of the core temperature
sensor in the centre of the meat.
3. Put the plug of the core temperature sensor in the socket at the side wall of the
appliance.
The display shows a flashing symbol
and the default set core temperature. The
temperature is 60 °C during the first use,
and the last set value during each subsequent use.
or
to set the core tempera4. Touch
ture.
or the settings save automatically after 5 seconds.
5. Touch
You can set the core temperature only when the symbol
flashes. If the display shows a
before you set the core temperature, use
and
or
to set a new
static symbol
value.
6. Set the oven function and, if necessary, the oven temperature.
The display shows the current core temperature and (which shows the relation between the set oven temperature and the current oven temperature).
The core temperature sensor must stay in the meat and in the socket during the cooking.
While the appliance calculates the approximate duration time, the value of the Count Up
Timer function shows in the Timer/Residual heat display. When the first calculation ends,
the Timer/Residual heat display shows " - ", and then the approximate duration of the cooking.
The appliance continues to calculate the duration during the cooking. The display updates
at intervals with the new duration value.
7. When the meat is at the set core temperature, the core temperature and
flash. The
appliance deactivates. An acoustic signal sounds for two minutes.
Touch on/off sensor field to deactivate the acoustic signal.
WARNING!
Be careful when you remove the core temperature sensor. The core temperature sensor and
the appliance are hot. There is a risk of burns.
8. Remove the core temperature sensor from the socket and remove the meat from the
appliance.
When you put the core temperature sensor in the socket, you cancel the settings for the
clock functions.
Additional functions
19
When you cook with the core temperature sensor, you can change the temperature shown
in the Temperature/Time display. After you put the core temperature sensor in the socket
and set an oven function and temperature, the display shows the current core temperature.
Touch
again and again to see three other temperatures:
• The current core temperature
• The oven set temperature
• The current oven temperature.
Telescopic runners
With telescopic runners you can put and remove the shelves more easily.
1. Pull out the right and left hand telescopic
runners.
2. Put the oven shelf on the telescopic runners and carefully push them in the appliance.
Make sure you push back the telescopic
runners fully in the appliance before you
close the oven door.
CAUTION!
Do not clean the telescopic runners in the
dishwasher. Do not lubricate the telescopic
runners.
ADDITIONAL FUNCTIONS
Child safety
You cannot activate the appliance on if the child safety device operates.
Activating/Deactivating the child safety device:
1. Deactivate the appliance . Do not set any oven function.
at the same time for minimum 2 seconds.
2. Touch and hold and
°C
°C
20
Additional functions
3. An acoustic signal sounds.
SAFE goes on in the display when you touch any key.
If the oven has "Pyro Cleaning" function, the door is locked.
Control Lock
The Control Lock prevents you to accidentally change the oven functions.
You can activate the Control Lock only when the appliance operates.
Activate the Control Lock:
1. If necessary, activate the appliance.
2. Do the necessary settings.
at the same time.
3. Touch and hold and
Loc goes on in the display. The Control Lock is on.
To deactivate the Control Lock, touch and hold and
at the same time.
The Control Lock does not prevent you accidentally deactivate the appliance. If you deactivate the appliance, the Control Lock is off.
Settings menu
The settings menu lets you to add or remove functions from the main menu (for example:
you can set on or off the Residual heat indicator). Settings menu has maximum eight settings (from SET1 to SET7). The number of the settings is different for different models. Look
into the table below to see the possible value of each setting.
Settings menu
Indicator of the setting menu
Description
Value to set
SET1
SET+GO
ON/OFF
SET2
RESIDUAL HEAT INDICATOR
ON/OFF
SET3
KEY TONE
CLIC/BEEP/OFF
SET4
FAULTY TONE
ON/OFF
SET5
SERVICE MENU
ON/OFF
SET6
RESTORE SETTINGS
YES/NO
SET71)
TIME EXTENSION
ON/OFF
1) Selected models only
You can set the settings menu only when the appliance is off.
Activate the Settings menu:
1. If necessary, deactivate the appliance .
2. Touch and hold for three seconds.
The display shows "SET1" and "1" flashes.
/
to set the setting.
3. Touch
Care and cleaning
4. Touch
5. Touch
6. Touch
.
/
.
21
to change the value of the setting.
Automatic switch-off
The appliance deactivates after some time:
• if you do not deactivate the appliance;
• if you do not change the oven temperature.
Oven temperature
Switch-off time
30°C - 115°C
12,5 h
120°C - 195°C
8.5 h
200°C - 245°C
5.5 h
250°C
3.0 h
To operate the appliance after an automatic switch-off, first deactivate the appliance fully.
Brightness of the display
There are two modes of display's brightness:
• Night brightness - when the appliance is off, the brightness of the display is lower between 22:00 and 06:00;
• Day brightness:
– when the appliance is on;
– if you touch any of the sensor fields during night brightness (apart from ON/OFF), the
display goes back to day brightness mode for next 10 seconds;
– if the appliance is off and you set the minute minder. When the minute minder function ends, the display goes back to night brightness;
Cooling fan
When the appliance operates, the cooling fan activates automatically to keep the surfaces
of the appliance cool. If you deactivate the appliance, the cooling fan can continue to operate until the appliance cools down.
CARE AND CLEANING
WARNING!
Refer to "Safety information" chapter.
Notes on cleaning:
• Clean the front of the appliance with a soft cloth with warm water and cleaning agent.
• To clean metal surfaces use a usual cleaning agent
• Clean the oven interior after each use. Thus you can remove dirt more easily and it does
not burn on.
• Clean stubborn dirt with a special oven cleaner.
22
Care and cleaning
• Clean all oven accessories (with a soft cloth with warm water and cleaning agent) after
each use and let them dry.
• If you have nonstick accessories, do not clean them using an aggressive agents, sharp
edged objects or dishwasher. It can cause a damage to the nonstick coating.
Cleaning the door gasket
• Regularly do a check of the door gasket. The door gasket is around the frame of the oven
cavity. Do not use the appliance if the door gasket is damaged. Contact the Service Centre.
• To clean the door gasket refer to the general information about the cleaning.
Telescopic shelf runners
You can remove the telescopic runners to clean the side walls.
Removing the telescopic runners
1. Pull the front of the telescopic runners
away from the side wall.
2. Pull the telescopic runners from the rear
side of the wall and remove the telescopic
runners.
2
1
Installing the telescopic runners
Install the telescopic runners in the opposite sequence.
The retaining pins on the telescopic shelf runners must point to the front!
CAUTION!
Do not clean the telescopic runners in the dishwasher. Do not lubricate the telescopic runners.
Oven ceiling
You can remove the heating element on the oven ceiling to clean the oven ceiling easily.
Care and cleaning
23
WARNING!
Before you remove the heating element switch off the appliance. Make sure that the appliance is cold. There is a risk of burns!
1. Remove the screw which holds the heating element. At first time, use a screwdriver.
2. Carefully pull the heating element down.
At this time you can clean the oven ceiling.
Clean the oven ceiling with a soft cloth with
warm water and cleaning agent and let it dry.
Installing the heating element
1. Install the heating element in opposite sequence.
WARNING!
Make sure that the heating element is correctly installed and it does not fall down.
Oven lamp
WARNING!
Be careful! There is the risk of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the circuit breaker.
Put a cloth on the bottom of the oven for protection of the oven light and glass cover.
1. Turn the glass cover anti-clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with applicable 300°C heat-resistant oven light bulb.
Use the same oven lamp type.
24
Care and cleaning
4. Install the glass cover.
Cleaning the oven door
The oven door has three panels of glass installed one behind the other. You can remove the
glass panels to clean them.
The oven door is not reversible.
Removing the glass panels
1. Hold the door trim on the top edge of the
door (A) at the two sides and pull it upwards to remove it. Be careful with the
glass panels and make sure that they do
not fall.
2. Hold the door glass with one hand and
remove the first glass panel (B) with the
other hand.
A
B
Care and cleaning
Do the same with the second glass panel
(C).
Clean the glass panels with water and soap.
Dry the glass panels carefully.
25
C
Installing the glass panels
After you clean the door, install the glass panels in the opposite sequence.
Make sure that you put the middle panel of glass in the correct seats and in the rubber
distance holders (D). Refer to the illustration.
D
D
D
BE7714000
D
BE7614000
The middle panel has a dot in one of the corners. When you install this panel, make sure
that the dot is in the top left corner of the glass panel.
The first glass panel has a decorative frame. When you install this panel, make sure that the
screen-printing is on the outer side. Make sure that the surface of the glass panel frame is
not rough when you touch it.
26
What to do if…
WHAT TO DO IF…
WARNING!
Refer to "Safety information" chapter.
Problem
The appliance
does not heat
up
Possible cause
Solution
The appliance is deactivated
Activate the appliance
The time of day is not set.
Set the clock. Refer to "First setting the time of day"
The necessary settings are
not set
Make sure, the settings are correct
The automatic switch-off
is activated
Refer to „Automatic switch-off“
The fuse is released
Make sure, if the fuse is the cause for the malfunction. If the fuse releases again and again, refer to an
authorized electrician
The "Demo" function is on.
Deactivate the "Demo" function.
1. Deactivate the appliance.
2. Touch and hold
until an acoustic signal
sounds (for minimum 5 seconds).
3. Touch and hold
and
at the same time
for 2 seconds until an acoustic signal sounds.
The oven lamp
does not operate
The oven lamp is defective
Replace the oven lamp.
The display
shows C2
You want to start the Keep Remove the core temperature sensor plug from the
warm or Defrost function socket.
but you did not remove
core temperature sensor
plug from the socket.
The display
shows an error
code.
There is an electronic fault
• Deactivate the appliance with the house fuse or
the safety switch in the fuse box and activate it
again
• If the display shows the error code again, refer to
the Customer Care Department
Steam and
You left the dish in the ap- Do not let the dishes stay in the appliance for loncondensation
pliance for too long.
ger than 15-20 minutes after the cooking is comcollect on the
pleted.
food and in the
appliance.
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
Installation
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
27
.........................................
.........................................
.........................................
INSTALLATION
WARNING!
Refer to "Safety information" chapter.
Building In
Overall oven dimensions
1 Spacers to be removed.
540
560
576
20
590
594
1
7
In column building-in
50
580
min. 550
560-570
28
Installation
Building-in under kitchen counter
593
min. 550
560-570
80-100
Securing the appliance to the cabinet
A
B
Electrical installation
WARNING!
Only a qualified and competent person must do the electrical installation.
The manufacturer is not responsible if you do not follow safety precautions from chapter
"Safety information".
This appliance is supplied with a main plug and a main cable.
The cable
Cable types applicable for installation or replacement: H07 RN-F, H05 RN-F, H05 RRF, H05
VV-F, H05 V2V2-F (T90), H05 BB-F.
For the section of the cable refer to the total power (on the rating plate) and to the table:
Environment concerns
Total power
29
Section of the cable
maximum 1380 W
3 x 0,75 mm²
maximum 2300 W
3 x 1 mm²
maximum 3680 W
3 x 1,5 mm²
The hearth cord (green/yellow cable) must be 2 cm longer than phase and neutral cables
(blue and brown cables).
ENVIRONMENT CONCERNS
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging material is environmentally-friendly and recyclable. Plastic parts are marked
with international abbreviations such as PE, PS, etc. Dispose of the packaging material in
the containers provided for this purpose at your local waste management facility.
30
31
www.aeg-electrolux.com/shop
892940809-A-352010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising