Aeg Arctis2073-4GS User Manual

Add to My manuals
24 Pages

advertisement

Aeg Arctis2073-4GS User Manual | Manualzz
ÖKO ARCTIS SUPER
2073-4 GS
Freezer
Operating Instructions
Dear customer,
Before placing your new refrigerator/freezer into operation please
read these operating instructions carefully. They contain important
information for safe use, for installation and for care of the appliance.
Please keep these operating instructions for future reference. Pass
them on to possible new owners of the appliance.
Notes which are important for your safety or for the proper functioning
of the appliance are stressed with a warning triangle and/or with
signal words (Warning!, Caution!, Attention!). Please observe the following carefully.
Additional information regarding operation and practical applications
of the appliance appear after this symbol.
Tips and notes concerning economical and environmentally sound
use of the appliance are marked with the cloverleaf.
Printed on paper manufactured with environmentally sound processes.
who thinks ecologically acts accordingly ...
2
Contents
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disposal of old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Remove transport safeguard . . . . . . . . . . . . . . . . . . . . . . . .6
Operating and indicator panel . . . . . . . . . . . . . . . . . . . . . . .7
Starting up and temperature regulation . . . . . . . . . . . . . . .8
Ice pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Freezing and storing frozen food . . . . . . . . . . . . . . . . . . . .9
Storage Goods Symbols/ Freezing Calendar . . . . . . . . . .10
Preparation of Ice Cubes . . . . . . . . . . . . . . . . . . . . . . . . . .11
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Something not working . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Service and Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Guarantee Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Electrical Connection . . . .
Installation Location . . . . .
Your refrigerator needs air
Rear spacers . . . . . . . . . .
Levelling the appliance . . .
Reverseing the door . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.18
.19
.19
.20
.20
.20
Regulations, Standards, Guidelines . . . . . . . . . . . . . . . . .22
2222 128-71
3
Safety
Please read this instruction book before using the appliance and retain
for future reference. These warnings are provided in the interests of your
safety, ensure you understand them fully before using the appliance.
Intended use
• The appliance is intended for use in the home. It is suitable for the
cooling, freezing and storing of frozen food, as well as for making
ice. If the appliance is used for purposes other than those intended
or used incorrectly, no liability can be accepted by the manufacturer
for any damage that may be caused.
• Alterations or changes to the freezer are not permitted for reasons
of safety.
Prior to initial start–up
• Check the appliance for transport damage. Under no circumstance
should a damaged appliance be plugged in! In the event of damage,
please contact your retailer.
Refrigerant
The refrigerant isobutane (R600a) is contained within the refrigerant
circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.
• During transportation and installation of the appliance, be certain that
none of the components of the refrigerant circuit become damaged.
• If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition;
– thoroughly ventilate the room in which the appliance is situated.
Safety of children
• Keep packaging material away from children.
• Please make old appliances unusable prior to disposal. Pull out the
mains plug, cut off the mains cable and remove any locks or catches, to prevent young children being trapped inside.
• Do not allow children to tamper with the controls or play with the product.
Daily Operation
• Containers with flammable gases or liquids can leak at low temperatures. There is a risk of an explosion! Do not store any containers
with flammable materials such as, for example, spray cans, fire
4
extinguisher refill cartridges etc in the refrigerator/freezer.
• Bottles and cans must not be placed in the freezer compartment.
They can burst when the contents freeze, high carbonate content
drinks can even explode! Never store lemonade, juices, beer, wine,
sparkling wine etc. in the freezer compartment.
• Ice cream or ice cubes can cause “frost/freezer” burns if consumed
straight from the freezer.
• Do not touch frozen food with wet hands. Your hands could freeze
to the food.
• Do not operate any electrical appliances in the refrigerator/freezer
(e.g. electric ice cream makers, mixers etc.).
• Before cleaning the appliance, always switch off the appliance and
unplug it, or pull the house fuse or switch off the circuit breaker.
• When unplugging always pull the plug from the mains socket, do not
pull on the cable.
Service
• Under no circumstances should you attempt to repair the appliance
yourself. Repairs carried out by inexperienced persons may cause
injury or serious malfunctioning. Contact your local AEG Service
Force Centre.
5
Disposal
Appliance Packaging Information
All materials are environmentally sound.
The plastics can be recycled and are identified as follows:
>PE< for polyethylene, e.g. the outer covering and the bags in the
interior.
>PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluorocarbon.
The carton parts are made from recycled paper and should be disposed of at a waste-paper recycling collection location.
Disposal of old Appliances
For environmental reasons, refrigeration appliances must be disposed of properly. This applies to your old appliance, and - at the end of
its service life - to your new appliance as well.
Warning! Before disposing of old appliances make them inoperable.
Remove plug from mains, sever the power cable, remove or destroy any
snap or latch closures, to prevent small children being trapped inside.
• Information concerning collection schedules or locations can be
obtained from the local disposal authorities or town hall.
Remove transport safeguard
The appliance and the interior fittings are protected for transport.
• Remove all adhesive tape and packing pieces from the interior of the
appliance.
You can remove any remnants of adhesive using white spirit.
6
Operating and indicator panel
A BC
4
1
3
2
D
A
Alarm light (red)
B
Fast feezing light (yellow)
C
Fast feezing knob
D
Operating light (green)
E
Temperature regulator knob
E
The temperature regulator (E), which serves at the same time as the
appliance’s On-/Off switch.
The green pilot lamp (D), which comes on when the panel is switched on and the mains voltage is available. In this switch position, the
refrigerating unit automatically operates by system control.
The temperature regulator
(E), which can be used for continuously variable setting of the
most energy saving storage
temperature for your frozen
food.
The optimum storage condi+10
tons occur at -18°C and can be
°C
0
checked at the thermometer
-18
(fig.).
The yellow pilot light (B)
D008
comes on when the switch
(C) has been operated. The
refrigerating unit then operates
continuously.
The red temperature pilot-lamp (A) comes on when:
– the appliance has been started up but the storage temperature has
not yet been attained;
– the minimum storage temperature is no longer being maintained
(fault);
7
– excessive amounts of fresh food are placed inside; or
– if the appliance door is open for too long.
Important note: if you operate the fast-freeze switch or adjust the
temperature regulator, it may happen that your appliance’s refrigeration motor does not start immediately but only after some time. This
does not mean that your appliance has a fault.
Starting up and temperature regulation
Please clean the appliance interior and all accessories prior to starting the appliance. Plug in the appliance at the mains supply.
• Turn the temperature regulator (E) in the direction of „1“.
• The green lamp (D) and the red lamp (A) come on, the audible warning sounds (if fitted), and the refrigeration motor starts up.
• Additionally operate the fast-freeze knob (C). The yellow pilot lamp
(B) comes on.
• Only when the red lamp (A) has gone out should you reset the fastfreeze knob (C) the yellow light (B) goes out and the audible warning is activated again.
Setting “0”: Off.
Setting “1”: Hightest temperature, (warmest setting).
Setting “4” (end-stop) : Lowest temperature, (coldest setting).
The exact setting should be chosen keeping in mind that the temperature inside the appliance depends on:
- the quantity of food stored
- how often the door is opened
- ambient temperature
Important:
Regularly check on the red temperature pilot lamp (5) and the thermometer that the required storage temperature is being maintained.
8
Ice pack
There is an ice pack in one drawer of the freezer.
In the event of a power failure or malfunction, the ice pack will
lengthen the amount of time it takes for the frozen food to become too
warm by several hours. The ice pack can only fulfil this task optimally if it is placed in the uppermost drawer, at the front, above the frozen
food. You can use the ice pack for cooling cold bags.
Freezing and storing frozen food
You can use your freezer for freezing fresh food yourself.
Important!
• The temperature in the freezer compartment must be –18 °C or colder before freezing food.
• Please observe the freezing capacity given on the rating plate. The
freezing capacity is the maximum quantity of fresh food that can be
frozen within a period of 24 hours. If you wish to freeze food several
days in a row, please observe a maximum capacity of only 2/3 to 3/4
of that on the rating plate. The quality of the food is best preserved
when it is frozen right through to the core as quickly as possible.
• Allow warm food to cool down before freezing. The warmth will cause increased ice formation and increase the power consumption.
• Please note the maximum storage times specified by the manufacturer.
• Thawed foods which have not been processed further (cooked into
meals) may not under any circumstances be frozen a second time.
• Containers with flammable gases or liquids can leak at low temperatures. There is a risk of an explosion! Do not store any containers
with flammable materials such as, for example, spray cans, fire
extinguisher refill cartridges etc in the refrigerator/freezer.
• Bottles and cans must not be placed in the freezer. They can burst
when the contents freeze, high carbonate content drinks can even
explode! Never store lemonade, juices, beer, wine, sparkling wine
etc. in the freezer.
• All foods must be packed air tight prior to freezing, so that they do
not dry out or lose their flavour, and so that no flavour contamination of other frozen goods occurs.
Caution! Do not touch frozen food with wet hands. Your hands could
freeze to the food.
9
1.
Place the packed food in the drawers. Place food to be frozen in the
appliance´s second and third top drawers. Unfrozen food must not
touch items already frozen, otherwise the frozen food could begin to
defrost.
Freezer drawers (4) and (5) should only be used for storage of frozen
food. In order to enlarge the appliance´s volume the two centre
drawers can be removed.
2.
Place frozen foods in the drawers sorted by type, as far as possible.
Riders are supplied for placing on drawers. To mark the contents of
the individual drawers, press the rider over the corresponding symbol
(see "Frozen Food Symbols/Freezer Calendar" section). This will give
you a better overview of the contents, avoid extended door opening
and therefore save electricity.
3.
Once the required storage temperate has been reached, press the
fast freeze button again. The yellow light goes out.
Storage Goods
Calendar
Symbols/Freezing
• The symbols on the drawers show different types of frozen goods.
• The numbers indicate storage times in months for the appropriate
types of frozen goods. Whether the upper or lower value of the indicated storage time is valid depends on the quality of the foods and
pre-treating before freezing. The lower value applies to foods with
high fat content.
• By attaching the included index-tabs to the drawers, they can be
marked according to which type of foods the individual compartments contain.
10
Preparation of Ice Cubes
1.
Fill the ice cube tray 3/4 full with cold water, place it in the freezer
compartment and leave to freeze.
2.
To loosen the frozen cubes, either bend the ice cube tray or hold it
under running water for a few seconds.
Important! Never try to free an ice tray that is frozen to the freezer
compartment using pointed or sharp edged objects. Use the ice scraper supplied.
Defrosting
Freezer
The freezer compartment, however, will become progrssively covered
with frost. This should be removed with the special plastic scraper
provided, whenever the thickness of the frost exceeds 4 mm. During
this operation it is not necessary to switch off the power supply or to
remove the foodstuffs.
However when the ice becomes very thick on the inner liner, complete defrosting should be carried out as follows:
1.
Remove the frozen food from the freezer, wrap it in several layers of
newspaper and put it in a very cool place.
2.
Switch off the appliance and
pull out the plug.
3.
Leave the freezer compartment door open.
4.
Insert the plastic scraper into
the recess provided under the
defrost water channel and place a collecting basin under it.
5.
Once defrosting is completed
keep the scraper for future
use.
6.
Turn the thermostat knob to the required setting and replace the plug
in the power socket.
Warning!
Never use metal tools to scrape off the frost
11
Do not use a mechanical device or any artificial means to speed up
the thawing process.
A temperature rise of the frozen food packs, during defrosting, may
shorten their safe storage life.
Switching off the appliance
1.
2.
3.
4.
5.
To switch off the appliance, turn the temperature regulator to position "0".
If the appliance is not going to be used for an extended period:
Remove all refrigerated and deep-frozen packages as well as ice trays.
Switch off the appliance by turning the temperature regulator to position "0".
Remove the mains plug or switch off or turn out the circuit breaker or fuse.
Defrost freezer compartment and clean thoroughly (see section: “Cleaning and Care”).
Leave the door open to avoid the build up of odours.
Cleaning and Care
For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly.
Warning!
Before carrying out any cleaning or maintenance, disconnect the
appliance from the electricity supply.
• Never clean the appliance with a steam cleaner. Moisture could
accumulate in electrical components, danger of electrical shock!
Hot vapours can lead to the damage of plastic parts.
• The appliance must be dry before it is placed back into service.
Warning!
• Ethereal oils and organic solvents can attack plastic parts, e.g.
– lemon juice or the juice from orange peel,
– butyric acid;
– cleansers which contain acetic acid.
Do not allow such substances to come into contact with appliance parts.
• Do not use any abrasive cleansers.
1.
12
Remove frozen food and the food from the refrigerator. Wrap frozen food
in several layers of newspaper. Store it in a cool place, well covered.
2.
Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse.
3.
Clean the appliance and the
interior accessories with a cloth
and lukewarm water. Commercially available dish washing
detergents may also be used.
4.
After cleaning wipe with fresh
water and rub dry.
5.
Check the water drain hole on
the rear wall of the fridge. Clear
a blocked drain hole with the
aid of the drain cleaning tool
included with the appliance.
6.
After everything is dry place appliance back into service.
Energy Saving Tips
• Do not install the appliance near cookers, radiators or other sources
of warmth. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
• Only leave door open as long as necessary.
• Do not set temperature any colder than necessary.
• Put frozen food in the fridge to defrost. The cold in the frozen food
will then be used to cool the fridge.
Accumulation of dust at the condenser increases energy consumption. For this reason carefully clean the condenser at the back of the
appliance once a year with a soft brush or a vacuum cleaner. Ensure
the appliance is switched off.
13
Something Not Working
If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre.
Warning!
Repairs should only be carried out by qualified service engineers.
Repairs carried out by inexperienced persons may cause injury or
serious malfunctioning.
Malfunction
Possible Cause
Remedy
Appliance is not switched on Switch on the appliance.
Mains plug is not plugged in Insert mains plug.
or is loose.
Appliance does not work.
Fuse has blown or is defec- Check fuse, replace if
tive.
necessary.
Socket is defective.
Appliance cools too much.
Mains malfunctions are to be
corrected by an electrician.
Temperature is set too cold. Turn the temperature regulator to a warmer setting
temporarily..
Temperature is not properly Please look in the "Initial
adjusted.
Start Up" section.
Door was open for an exten- Open the door only as long
ded period.
as necessary.
The food is too warm.
A large quantity of warm food Turn the temperature reguwas placed in the appliance lator to a colder setting temwithin the last 24 hours.
porarily.
The appliance is near a heat Please look in the "Installasource.
tion location" section.
Heavy build up of frost, pos- Door seal is not air tight
sibly also on the door seal. (possibly after changing
over the hinges).
14
Carefully warm the leaking
sections of the door seal
with a hair dryer (not hotter
than approx. 50 °C). At the
same time shape the warmed door seal by hand such
that it sits correctly.
Malfunction
Unusual noises.
Possible Cause
Remedy
Appliance is not level.
Readjust the feet.
The appliance is touching
the wall or other objects.
Move the appliance slightly.
A component, e.g. a pipe,
If necessary, carefully bend
on the rear of the appliance the component out of the
is touching another part of way.
the appliance or the wall.
The compressor does not
This is normal, no error has The compressor starts after
start immediately after chan- occurred.
a period of time.
ging the temperature setting.
15
Service and Spare Parts
If, after carrying out the necessary checks there is still a fault with
your appliance please contact your local AEG Service Force Centre.
In guarantee customers should ensure that the suggested
checks have been made as the engineer will make a charge if the
fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for any in-guarantee
service calls.
Service and Spare Parts
If you require a service engineer or wish to purchase spare parts,
contact your local AEG Service Force Centre by telephoning:
0870 5 929929
Help us to help you
Please determine your type of enquiry before telephoning. When you
contasct us we need to know:
1.Your name, address and post code
2.Your telephone number
3.Clear and concise details of the fault
- What is the fault?
- When does the fault occur?
4.The model, production number and product identification number.
5.Date of purchase
This information can be found on the serial plate in the interior at the
left of the appliance.
• Model Name
• Model Number (PNC)
• Serial Number (S-No.)
Customer Care Department
For general enquiries regarding your AEG appliance, or futher information on AEG products please contact our customer care department.
Customer Care Department
AEG Domestic Appliances
55-77 High Street, Slough, Berkshire SL1 1DZ
Tel: 08 705 350 350
16
Guarantee Conditions
Guarantee Conditions
AEG offer following guarantee to the first purchaser of this appliance.
1. The guarantee is valid for 12 months commencing when the appliance is
handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation.
The guarantee does not cover commercial use.
2. The guarantee covers all parts or components which fail due to faulty workmanship or faulty materials. The guarantee does not cover appliances where defects or poor performance are due to misuse, accidental damage,
neglect, faulty.installation, unauthorised modification or attempted repair,
commercial use or failure to observe requirements and recommendations
set out in the instruction book.
This guarantee does not cover such parts as light bulbs, removable glassware, dust bags or filters.
3. Should guarantee repairs be necessary the purchaser must inform the
nearst customer service office (manufacturer’s
service or authorised
agent). AEG reserves the right to stipulate the place of the repair (i.e. the
customer’s home, place of installation or AEG workshop).
4. The guarantee or free replacement includes both labour and materials.
5. Repairs carried out under guarantee do not extend the guarantee period for
the appliance. Parts removed during guarantee repairs become the proerly
of AEG.
6. The purchaser’s statutory rights are not affected by this guarantee.
European Guarantee
If you should move to another country within Europe then your guarantee
moves with you to your new home subject to the following qualifications:
- The guarantee starts from the date you first purchased your product.
- The guarantee is for the same period and to the same extent for labour and
parts as exist in the new country of use for this brand or range of products.
- This guarantee relates to you and cannot be transferred to another user.
- Your new home is within the European Community (EC) or European Free
Trade Area.
- The product is installed and used in accordance with our instructions and is
only used domestically, i.e. a normal household.
- The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care Centre, listed
below, to give them details of your new home. They will then ensure that the
local Service Organisation is aware of your move and able to look after you
and your appliances.
France
Senlis
+33 (0)3 44 62 29 29
Germany
Nürnberg
+49 (0) 911 323 2600
Italy
Pordenone
+39 (0) 1678 47053
Sweden
Stockholm
+46 (0) 8 738 7910
UK
Slough
+44 (0) 8705 350 350
17
Installation
Electrical Connection
Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
WARNING – THIS APPLIANCE MUST BE EARTHED
The manufacturer declines any liability should these safety measures not be observed.
Before switching on, make sure the electricity supply voltage is the
same as that indicated on the appliance rating plate. The rating plate
is inside, on the left.
The appliance is supplied with a 13 amp plug fitted. In the event of
having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
Important!
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow Earth
Blue Neutral
Brown Live
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings indentifying the terminals in
your plug, proceed as follows:
1.
The wire coloured green and yellow must be connected to the terminal marked with the letter “E” or by the earth symbol or coloured green
and yellow.
2.
The wire coloured blue must be connected to the terminal “N” or
coloured black.
3.
The wire coloured brown must be connected to the terminal marked
“L” or coloured red.
4.
Upon completion there must be not cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.
Warning! A cut-off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut-off plug is disposed of
safely.
18
Installation Location
The appliance should be set up in a well ventilated, dry room.
Energy use is affected by the ambient temperature. The appliance
should therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed.
The climate classification can be found on the serial plate, which is
located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for
each climate classification: each climate classification:
Climate classification
for an ambient temperature of
SN
+10 to +32 °C
N
+16 to +32 °C
ST
+18 to +38 °C
T
+18 to +43 °C
10 mm
10 mm
Air flows in from under the
door, at the front, and flows out
upwards, over the back. For
correct air circulation, it is
important that the ventilation
openings are not covered or
obstructed.
Important If the appliance is
positioned under a kitchen wall
unit, a minimum clearance of
10 cm must be left between
the top of the appliance and
the overhanging wall unit.
100 mm
Your appliance needs air
NP007
19
Rear spacers
In the bag with the documentation, there are two spacers
which must be fitted.
slacken the screws and insert
the spacer under the screw
head, then re-tighten the
screws.
PR153
Levelling the appliance
Place the appliance on a flat
hard floor. Two adjustable feet
on the front of the appliance
enable it to accurately levelled
by screwing them in or out as
required.
AEG70
Reversing the door
The side at which the door opens can be changed from the right side
(factory fitted) to the left side.
Warning! When changing the side at which the door opens, the
appliance must not be connected to the mains. Remove plug from the
mains before reversing the door.
Procced as follow:
20
1.
Remove the clip-in ventilation
grille (D).
2.
Remove the bottom hinge (E)
by unscrewing the two fixing
screws.
3.
Slide the door off pin (A);
unscrew pin (A) and refit it on
the opposite side.
4.
Remove the two plugs, to
reveal the holes for the hinge
pivots, and remount them on
the other side.
5.
Refit the door.
6.
Refit bottom hinge (E) on the
opposite side, using the two
screws previously removed.
7.
G
F
D
F
PR18
Remove blanking cover (F)
from ventilation grille (D) by
pushing it in the direction of the
arrow and refit it on the opposite side.
8.
Refit ventilation grille (D), clipping it into place.
9.
Unscrew the handle. Refit it on
opposite side after having pierced the plugs with a punch.
Cover the holes left open with
the plugs contained in the
documentation pack.
Attention:
After having reversed the opening direction of the doors
check that all the screws are
properly tightened and that the
magnetic seal adheres to the
cabinet. If the ambient temperature is cold (i.e. in Winter),
the gasket may not fit perfectly
to the cabinet. in that case,
wait for the natural fitting of the
gasket or accelerate this process by heating up the part
involved with a normal hairdrier.
E
E
C
B
A
PR19
PR228
21
Regulations, Standards, Guidelines
This appliance was designed for household use and was manufactured in accordance with the appropriate standards. The necessary
measures in accordance with appliance safety legislation regulations
(GSG), accident prevention regulations for refrigeration appliances
(VBG 20) and the regulations of the German Society of Electrical
Engineers (VDE) were observed in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
This appliance is in accordance with the following EU guidelines:
– 73/23/EWG dated 19 February 1973 - low voltage guidelines.
– 89/336/EWG dated 3 May 1989
(including guideline change notice 92/31/EWG) - EMV guideline
22
23
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg.hausgeraete.de
2222 128-71

advertisement

Related manuals

advertisement