Electrolux | EWW12470W | User manual | Electrolux EWW12470W User Manual

Electrolux EWW12470W User Manual
132964080.qxd
14/02/2008
10.50
Pagina
1
User Manual
Washer-dryer
EWW 12470 W
132964080.qxd
14/02/2008
10.50
Pagina
2
132964080.qxd
14/02/2008
10.50
Pagina
3
electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future. The Electrolux ambition is to offer a
wide variety of quality products that make your life more comfortable. You find
some examples on the cover in this manual. Please take a few minutes to study
this manual so that you can take advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering Ease-ofMind. Good luck!
132964080.qxd
14/02/2008
10.50
Pagina
4
4 contents electrolux
Contents
Safety information..............................5
Installation .......................................37
Environment concerns .....................42
Product description ...........................8
Control panel .....................................9
Use..................................................13
Washing .....................................13
Drying.........................................17
Washing and drying hints ................19
International wash code symbol ......22
Washing programmes......................23
Drying programmes .........................25
Programme information ...................26
Care and cleaning ...........................27
What to do if....................................31
Techical data ...................................35
Consumption values ........................36
The following symbols are used in this manual:
Important information concerning your personal safety and information on how
to avoid damaging the appliance.
General information and tips
Environmental information
132964080.qxd
14/02/2008
10.50
Pagina
5
safety information electrolux 5
Safety Information
In the interest of your safety and to
ensure the correct use, before
installing and first using the
appliance, read this user manual
carefully, including its hints and
warnings. To avoid unnecessary
mistakes and accidents, it is
important to ensure that all people
using the appliance are thoroughly
familiar with its operation and safety
features. Save these instructions
and make sure that they remain
with the appliance if it is moved or
sold, so that everyone using it
through its life will be properly
informed on appliance use and
safety.
General safety
● It is dangerous to alter the
specifications or attempt to modify
this product in any way.
● During high temperature washing
and drying programmes the door
glass may get hot. Do not touch it!
● Make sure that small pets do not
climb into the drum. To avoid this,
please check into the drum before
using.
● Any objects such as coins, safety
pins, nails, screws, stones or any
other hard, sharp material can cause
extensive damage and must not be
placed into the machine.
● Only use the advised quantities of
fabric softener and detergent.
Damage to the fabric can ensue if
you over-fill. Refer to the
manufacturer’s recommendations of
quantities.
●
●
●
●
Wash small items such as socks,
laces, washable belts etc in a
washing bag or pillow case as it is
possible for such items to slip down
between the tub and the inner drum.
Do not use your washer-dryer to
wash and dry articles with
whalebones, material without hems
or torn material.
Always unplug the appliance and
turn off the water supply after use,
clean and maintenance.
Under no circumstances should you
attempt to repair the machine
yourself. Repairs carried out by
inexperienced persons may cause
injury or serious malfunctioning.
Contact your local Service Centre.
Always insist on genuine spare parts.
Installation
This appliance is heavy. Care should
be taken when moving it.
● When unpacking the appliance,
check that it is not damaged. If in
doubt, do not use it and contact the
Service Centre.
● All packing and transit bolts must be
removed before use. Serious
damage can occur to the product
and to property if this is not adhered
to. See relevant section in the user
manual.
● After having installed the appliance,
check that it is not standing on the
inlet and drain hose and the worktop
is not pressing the electrical supply
cable.
● If the machine is situated on a
carpeted floor, please adjust the feet
in order to allow air to circulate freely
● Always be sure, that there is no
water leakage from hoses and their
connections after the installation.
●
132964080.qxd
14/02/2008
10.50
Pagina
6
6 safety information electrolux
●
●
●
If the appliance is installed in a
location subject to frost, please read
the “dangers of freezing”chapter.
Any plumbing work required to install
this appliance should be carried out
by a qualified plumber or competent
person.
Any electrical work required to install
this appliance should be carried out
by a qualified electrician or
competent person.
Use
This appliance is designed for
domestic use. It must not be used
for purposes other than those for
which it was designed.
● Only wash and dry fabrics which are
designed to be machine washed
and dried. Follow the instructions on
each garment label.
● Do not overload the appliance. See
the relevant section in the user
manual.
● Before washing, ensure that all
pockets are empty and buttons and
zips are fastened. Avoid washing
frayed or torn articles and treat
stains such as paint, ink, rust, and
grass before washing. Underwired
bras must NOT be machine washed.
● As some duvets and eiderdowns
should be washed/dried in large
commercial machines because of
their bulk, please check with the
manufacturer of the item before
washing in a domestic machine.
● The users should always check that
they have not left their gas lighters
(disposable or otherwise) in their
clothing.
●
●
●
●
●
●
●
Never tumble dry items that have
had contact with chemicals such as
dry cleaning fluid.These are of a
volatile nature and could cause an
explosion.
Only tumble dry items which have
been washed in water or require airing.
Plastic detergent dispensers should
not remain in the drum during the
drying cycle, as the plastic used is
not designed to withstand the heat.
If you wish to wash-through-to-dry
you should use the conventional
detergent dispenser drawer.
Garments which have been in
contact with volatile petroleum
products should not be machine
washed. If volatile cleaning fluids are
used, care should be taken to
ensure that the fluid is removed from
the garment before placing in the
machine.
Never pull the power supply cable to
remove the plug from the socket;
always take hold of the plug itself.
Never use the washer-dryer if the
power supply cable, the control
panel, the working surface or the
base are damaged so that the inside
of the washer-dryer is accessible.
Leave the porthole door slightly ajar
between washes to preserve the
door seal
132964080.qxd
14/02/2008
10.50
Pagina
7
safety information electrolux 7
Child safety
● This appliance is not intended for
use by person (including children)
with reduced physical sensory or
mental capabilities or lack of
experience and knowledge unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
● The packaging components (e.g.
plastic film, polystyrene) can be
dangerous to children - danger of
suffocation! Keep them out of
children’s reach
● Keep all detergents in a safe place
out of children’s reach.
● Make sure that children or pets do
not climb into the drum. To avoid this
the machine incorporates special
feature. To activate this device, rotate
the button (without pressing it) inside
the door clockwise until the groove is
horizontal. If necessary use a coin.
P1131
To disable this device and restore
the possibility of closing the door,
rotate the button anti-clockwise until
the groove is vertical.
132964080.qxd
14/02/2008
10.50
Pagina
8
8 electrolux product description
Product description
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption.
The Eco valve system allows total use of detergent and reduces water
consumption so saving energy.
1
Detergent dispenser drawer
2
Control panel
3
Door opening handle
4
Drain pump
5
Adjustable feet
1
2
3
4
5
Detergent dispenser drawer
Prewash
Wash
Fabric Softener
EN001
132964080.qxd
14/02/2008
10.50
Pagina
9
control panel electrolux 9
Control panel
1
2
3
4
5
6
7
8
9 10
Henceforth, the programme selector dial, the different buttons and the pilot light(s)
will be indicated in all the book with the relevant numbers given in the table
above.
1
Programme selector dial
6
Delay Start button
2
Temperature button
7
Display
3
Spin Reduction button
8
Start/Pause button
4
Autodry button
9
Extra Rinse pilot light
5
Drying Time button
10 Time Manger buttons
Table of symbols
● Cottons
, Synthetics
, Spin
, Drain
, Easy iron
, Delicates
, Handwash
, Wool
Rinses
, Silk
, Cottons Eco
, Special
programmes
●
, No Spin
Drying
, Cold
Drying Time
, Delay Start
, Rinse hold
, Time manager
, Extra rinse
,
, Child safety Lock
,
132964080.qxd
14/02/2008
10.50
Pagina
10
10 electrolux use
Use
First Use
●
●
●
Ensure that the electrical and water
connections comply with the
installation instructions.
Remove the polystryrene block and
any material from the drum.
Pour 2 litres of water into the main
wash compartment
of the
detergent drawer in order to activate
the ECO valve. Then run a cotton
cycle at 95°C or 90°C, without any
laundry in the machine, to remove
any manufacturing residue from the
drum and tub. Pour 1/2 a measure of
detergent into the main compartment
of the dispenser drawer and start the
machine.
Acoustic signals
The machine is provided of an acoustic
device, which sounds in the following
cases:
● at the end of the cycle
● in the event of operating problems
By pressing buttons 4 and 5
simultaneously for about 6 seconds,
the acoustic signal is deactivated
(except for the events of operating
problems).
By pressing these buttons again, the
the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the
appliance not supervised without
having the worry that children might be
injured by or cause damage to the
appliance.
This function remains able also when
the washer-dryer is not working.
There are two different ways to set this
option:
1 before pressing the Start/Pause: it
will be impossible to start the
machine.
2
after pressing the Start/Pause: it
will be impossible to change any
other programme or option.
To enable or disable this option press
simultaneously buttons 5 and 6 for
about 6 seconds until, on the display,
the icon
appears or disappears.
132964080.qxd
14/02/2008
10.50
Pagina
11
use electrolux 11
Display ( 7 )
7.3 7.4 7.1
2.05
7.2
7.1 Duration of selected
programme/
After selecting a programme, the
duration is displayed in hours and
minutes (for example 2.05). The
duration is calculated automatically on
the basis of the maximum
recommended load for each type of
fabric. After the programme has
started, the time remaining is updated
every minute.
/Selected drying time
After selecting a drying programme, the
drying time is displayed in minutes or in
hours and minutes (max 130 mins =
2.10 ).
After the programme has started the
time remaining is updated every
minute.
/Delayed start
The selected delay set by pressing the
relevant button appears on the display
for a few seconds, then the duration of
the previously selected programme is
displayed.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
/Alarm codes
In the event of operating problems,
some alarm codes can be displayed,
for example E20 (see chapter «What to
do if...»).
/Incorrect option selection
If an option, which is not compatible
with the set washing programme, is
selected, the message Err is displayed
for a few seconds and the integrated
red light of button 8 starts blinking.
/End of programme
When the programme has finished, the
programme phase icons desappear
and three blinking zeros «0.00» are
displayed, the pilot light of button 8
go out and the door can be opened.
132964080.qxd
14/02/2008
10.50
Pagina
12 electrolux use
7.2 Washing/Drying programme
phase icons
By selecting the programme, the
washing and/or drying programme
phase icons corresponding to the
various phases making up the
programme are shown in the bottom of
the display.
After you have pressed button 8 and
the machine has started, only the
phase running icon stays on.
7.3 Soil level icons
When selecting a programme on the
display appears an icon indicating the
degree of soilness automatically
proposed by the machine for that
programme.
7.4 Child lock
This device permits you to leave the
appliance unattended during it’s
functioning.
12
132964080.qxd
14/02/2008
10.50
Pagina
13
use electrolux 13
Daily Use
If required, pour fabric softener into the
compartment marked
(the amount
used must not exceed the “MAX” mark
in the drawer). Close the drawer gently.
Load the laundry
Open the door by carefully pulling the
door handle outwards. Place the laundry
in the drum, one item at a time, shaking
them out as much as possible. Close
the door.
C0065
P0004
Measure out the detergent and the
fabric softener
Pull out the dispenser drawer until it
stops. Measure out the amount of
detergent required, pour it into the main
wash compartment
and, if you wish
to carry out a programme with the
prewash
phase, pour it into the
compartment marked
.
C0064
Select the required programme by
turning the programme selector dial
(1)
Turn the programme selector dial to the
required programme.
The green pilot light of button 8 starts
to flash and the display shows the
duration of the selected programme.
The selector dial can be turned either
clockwise or anticlockwise. Position O
corresponds to Reset programme/
Switching OFF of the machine.
At the end of the programme the
selector dial must be turned to
position O, to switch the machine off.
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the red pilot of
button 8 will flash 3 times and the
message Err will appear on the display
to indicate a wrong selection. The
machine will not perform the new
selected programme.
132964080.qxd
14/02/2008
10.50
Pagina
14
14 electrolux use
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before pressing button
8.
Select the temperature by pressing
button 2
Press this button repeatedly to increase
or decrease the temperature, if you
want your laundry to be washed at a
temperature different from the one
proposed by the washer-dryer.
When selecting a programme, the pilot
light corresponding to the temperature
proposed, illuminates.
corresponds to cold wash.
Select the Spin Speed, No Spin or
Rinse Hold option by pressing
button 3
Press this button repeatedly to change
the spin speed, if you want your laundry
to be spun at a speed different from the
one proposed by the washer-dryer. The
relevant light will light up.
When selecting a programme, the pilot
light corresponding to the maximum
speed allowed for that programme,
illuminates.
No Spin
option eliminates all the
spinning phases and increases the
number of the rinses for some
programmes.
Rinse Hold
: by selecting this
option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished, the button 8 light goes off, the
display shows 3 flashing zeros «0.00»
and the door is locked to indicate that
the water must be emptied out.
To empty out the water please see
the paragraph «At the end of the
programme».
Select the Autodry by pressing
button 4
By means of this button you can
choose the required degree of drying for
cottons and synthetics:
Extra dry (Cottons)
Store dry (Cottons and
Synthetics)
Iron dry (Cottons)
The relevant light illuminates.
The drying time is automatically
adjusted by the machine: the laundry
will be dried to the selected dryness
degree.
Select the Drying Time by pressing
button 5
If you wish to carry out a timed drying
programme, press this button until the
drying time you want appears on the
display according to the fabrics (cottons or synthetics) you have to dry.
For Cottons and Synthetics you can
select a drying time from 10 minutes to
130 minutes (2.10).
Every time you press this button the
drying time increases by 5 mins.
132964080.qxd
14/02/2008
10.50
Pagina
15
use electrolux 15
Select the Delay Start by pressing
button 6
Before you start the programme, if you
wish to delay the start, press this
button repeatedly, to select the desired
delay. The relevant light will illuminate.
The washing programme can be
delayed from 30 min - 60 min - 90 min,
2 hours and then by 1 hour up to a
maximum of 20 hours by means of this
button.
The selected delay time value (up to 20
hours) will appear on the display for a
few seconds, then the duration of the
programme will appear again.
You must select this option after you
have set the programme and before
you press button 8 .
If you wish to add laundry in the
machine during the delay time, press
button 8 to set the machine in pause.
Add the laundry, close the door and
press button 8 again.
You can cancel the delay time at any
moment, before you press button 8 .
SELECTING THE DELAYED START
• Select the programme and the
required options.
• Select the delay start by pressing
button 6 .
• Press button 8 : the machine starts
its hourly countdown.
The programme will start after the
selected delay has expired.
CANCELLING THE DELAYED START AFTER
HAVING PRESSED BUTTON 8
• Press button 8 .
• Press button 6 until the symbol 0’ is
displayed.
• Press button 8 again.
The Delay Start cannot be selected
with Drain
programme.
Select an additional rinse
This appliance is designed for saving
water. However, for people with a very
delicate skin (allergic to detergents) it
may be necessary to rinse the laundry
using an extra quantity of water (extra
rinse)
Press simultaneously buttons 4 and
6 for some seconds: the
pilot light 9 will light up.
This function stays permanently on.
To remove this function press the same
buttons again until the pilot light 9
goes off.
Select the Start/Pause by pressing
button 8
To start the selected programme, press
this button; the green pilot light stops
blinking. The appliance starts operating
and the door is locked.
To interrupt a programme which is
running, press button 8 : the green
pilot light starts to flash.
To restart the programme from the point
at which it was interrupted, press
button 8 again.
If you have chosen a delayed start, the
machine will begin the countdown.
If an incorrect option is selected, an
integrated red pilot light of button 8
flashes 3 times and the message Err is
displayed for a few seconds.
Select the “Time Manager” option
by pressing buttons 10
This function allows you to modify the
washing time, automatically proposed
by the washer-dryer.
By pressing these buttons repeatedly,
the duration of the washing cycle can be
increased or decreased.
132964080.qxd
14/02/2008
10.50
Pagina
16
16 electrolux use
A soil level icon will appear on the
display to indicate the choosen degree
of soil.
Soil
Level
Icon
Type of fabric
Intensive
For heavy soiled items
Normal
For normal soiled items
Daily
For daily soiled items
Light
For slightly soiled items
Quick
For very slightly soiled items
Super
Quick (*)
For items used or worn for a
short time
(*) Max. load for cottons: 3 kg.
Max. load for synthetics and
delicates: 2 kg.
Cottons
95°-90°C
60°C
40°C
30°C
(cold)
Synthetics
60°C
40°C
30°C
(cold)
Delicates
40°C
30°C
(cold)
Soil Level
Intensive Normal
X
X
X
X
X
It is possible to change some options
before the programme carries it out.
Before you make any change, you
must pause the washer-dryer by
pressing the button 8 .
(Only the Time Manager option cannot
be modified after the programme has
started).
Changing a running programme is
possible only by resetting it. Turn the
programme selector dial to O and then
to the new programme position. Start
the new programme by pressing the
button 8 again. The washing water in
the tub will be not emptied out.
Interrupting a programme
Attention!
«Time Manager» option cannot be
selected with the Cottons Eco
programmes.
The availability of these soil level icons
changes according to the type of fabric
as shown in the following chart:
Fabric
Altering an option or a running
programme
Daily
Light
Quick S. Quick
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Press button 8 to interrupt a
programme which is running, the
corresponding light starts to flash. Press
the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to O to cancel a
programme which is running. Now, a
new programme can be selected.
Opening the door after the
programme has started
First set the machine to pause by pressing
button 8 . If the door cannot be opened,
this means that the machine is already
heating, that the water level is above the
bottom edge of the door.
If you cannot open the door but you need
to open it you have to switch the machine
off by turning the selector dial to O.
After about a few minutes the door can be
opened (pay attention to the water
level and temperature!).
132964080.qxd
14/02/2008
10.50
Pagina
17
drying electrolux 17
At the end of the programme
The machine stops automatically. The
buzzer sounds. Three flashing zeros
«0.00« will appear on the display, the
light of button 8 goes off: the door
can be opened.
If the Rinse Hold
option has been
selected, the door remains locked to
indicate that the water must be empty
out before opening the door.
To empty out the water:
turn the programme selector dial to
“O”
● Select Drain or Spin programme
● reduce the spin speed if needed, by
pressing the relevant button
● press button 8
● at the end of the programme, the
display shows 3 flashing zeros
«0.00». The door can be opened.
At the end of the cycle, turn the
programme selector dial to O to switch
the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty.
If you do not intend to carry out
another wash, close the water tap.
Leave the door open to prevent the
formation of mildew and unpleasant
smells.
●
Use - Drying
Drying only
Warning! Do not exceed the following
laundry loads:
- 3 kg for linen and cottons
- 2 kg for synthetics
The water tap must be open and
the drain hose must be positioned
in the sink or connected to the
drain pipe.
1. Load the laundry.
2. Select the drying programme (for
Cottons
or Synthetics
in the
Drying
sector).
3. If you wish to select a timed
drying, press button 5 until the
time you want appears on the display (see the drying programmes).
Every time you press this button the
drying time increases by 5 mins.
If you wish to carry out the
electronic drying, press button 4
until the pilot light corresponding to
the required dryness degree lights
up.
Note!
The programme time will automatically
increase by up to 2 minutes, this is
quite normal.
4. Press button 8 to start the programme.
After the programme has started, the
time remaining is updated every minute.
5. At the end of the programme, the
buzzer sounds. Three flashing zeros
«0.00» appear on the display.
132964080.qxd
14/02/2008
10.50
Pagina
18
18 electrolux drying
The last 10 minutes of the drying cycle
correspond to an anti-crease phase.
During this time the door is locked and
the display keeps showing three
flashing zeros «0.00»
Note!
If you whish to open the door before or
during the anti-crease phase or to
interrupt it, press any button or turn the
programme selector dial to any programme position (except «O»), the
door can be immediately opened.
6. Turn the selector dial to the «O»
position to switch the machine off.
Remove the laundry.
Automatic washing and drying
(NON-STOP programme)
For NON-STOP programmes, it is also
essential not to exceed the maximum
load sizes of 3 kg for cotton and 2 kg
for synthetics.
Do not use a dosing device/ball
whe n carrying out a washing &
drying programme.
1. Load the laundry.
2. Add detergent and fabric softener.
3. Switch the machine on by turning
the selector dial to the selected
washing programme/fabric.
4. Select the required options by
pressing the relevant buttons.
Note!
If possible, do not select a spin speed
lower than that proposed by the appliance to avoid a too long drying time so
saving energy.
In any case the reduction of the spin
speed is only possible after selecting
drying.
The lowest values you can select are
the following:
- 900 r.p.m. for cottons and synthetics with electronic drying
- 900 r.p.m. for cottons and 700
r.p.m. for synthetics with timed
drying
5. Select the drying time or dryness
degree by pressing buttons 4 or
5 . The display shows the
entire duration of the washing and
the selected drying cycle.
6. Start the programme by pressing
button 8 . After the programme
has started, the time remaining is
updated every minute.
7. At the end of the programme turn
the selector dial to the «O» position
to switch the machine off.
8. Remove the laundry.
132964080.qxd
14/02/2008
10.50
Pagina
19
washing & drying hints electrolux 19
Washing and Drying hints
Sorting the laundry
Follow the wash code symbols on
each garment label and the
manufacturer’s washing instructions.
Sort the laundry as follows: whites,
coloureds, synthetics, delicates,
woollens.
Temperatures
90°/95°
50°/60°
30°-40°
(cold)
for normally soiled white
cottons and linen (e.g. tea
cloths, towels, tablecloths,
sheets...)
for normally soiled, colour
fast garments (e.g. shirts,
night dresses, pyjamas....) in
linen, cotton or synthetic
fibres and for lightly soiled
white cotton (e.g.
underwear).
for delicate items (e.g. net
curtains), mixed laundry
including synthetic fibres and
woollens bearing the label
«pure new wool, machine
washable, non-shrink».
Before loading the laundry
Never wash whites and coloureds
together. Whites may lose their
“whiteness” in the wash.
New coloured items may run in the first
wash; they should therefore be washed
separately the first time.
Make sure that no metal objects
are left in the laundry (e.g. hair
clips, safety pins, pins).
Button up pillowcases, close zip
fasteners, hooks and poppers. Tie any
belts or long tapes.
Remove persistent stains before
washing.
Rub particularly soiled areas with a
special detergent or detergent paste.
Treat curtains with special care.
Remove hooks or tie them up in a bag
or net.
Avoid drying dark clothes with light
coloured fluffy items such as towels as
these can attract the fluff.
Remove the laundry when the appliance has finished drying.
To avoid a static charge when drying is
completed, use either a fabric softener
when you are washing the laundry or a
fabric conditioner specifically for tumble
dryers.
Particularly delicate items such as synthetic curtains, woollen and silk, garments with metal inserts, nylon stockings, bulky garments such as anoraks,
bedcovers, quilts, sleeping bags and
duvets must not be machine dried.
Garments padded with foam-rubber or
materials similar to foam-rubber must
not be machine dried; they represent a
fire hazard.
Also, fabrics containing residues of setting lotions or hair sprays, nail solvents
or similar solutions must not be
machine dried in order to avoid the formation of harmful vapours.
For drying, follow the indications given
on the manufacturer’s labels.
May be tumble dried
Drying at high temperature
Drying at reduced temperature
Do not tumble dry
132964080.qxd
14/02/2008
10.50
Pagina
20
20 electrolux washing & drying hints
Important
As a dryer, the machine works on the
condensation principle.
Therefore, the water tap must be
open and the drain hose must drain
water into a sink or into the drain
pipe, even during the drying cycle.
Maximum loads
Recommended loads are indicated in
the programme charts.
General rules:
Cotton, linen: drum full but not too
tightly packed;
Synthetics: drum no more than half
full;
Delicate fabrics and woollens: drum
no more than one third full.
Washing a maximum load makes the
most efficient use of water and energy.
For heavily soiled laundry, reduce the
load size.
Laundry weights
The following weights are indicative:
bathrobe
napkin
quilt cover
sheet
pillow case
tablecloth
towelling towel
tea cloth
night dress
ladies’ briefs
man’s work shirt
man’s shirt
man’s pyjamas
blouse
men’s underpants
1200 g
100 g
700 g
500 g
200 g
250 g
200 g
100 g
200 g
100 g
600 g
200 g
500 g
100 g
100 g
Removing stains
Stubborn stains may not be removed
by just water and detergent. It is
therefore advisable to treat them prior
to washing.
Blood: treat fresh stains with cold
water. For dried stains, soak overnight
in water with a special detergent then
rub in the soap and water.
Oil based paint: moisten with benzine
stain remover, lay the garment on a
soft cloth and dab the stain; treat
several times.
Dried grease stains: moisten with
turpentine, lay the garment on a soft
surface and dab the stain with the
fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water
or a rust removing product used cold.
Be careful with rust stains which are
not recent since the cellulose structure
will already have been damaged and
the fabric tends to hole.
Mould stains: treat with bleach, rinse
well (whites and fast coloureds only).
Grass: soap lightly and treat with
bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone (*), lay the garment on a soft
cloth and dab the stain.
Lipstick: moisten with acetone as
above, then treat stains with
methylated spirits. Remove any
residual marks from white fabrics with
bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks
with bleach.
132964080.qxd
14/02/2008
10.50
Pagina
21
washing & drying hints electrolux 21
Ink: depending on the type of ink,
moisten the fabric first with acetone (*),
then with acetic acid; treat any residual
marks on white fabrics with bleach and
then rinse thoroughly.
Tar stains: first treat with stain
remover, methylated spirits or benzine,
then rub with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on
the choice of detergent and use of the
correct quantities to avoid waste and
protect the environment. Although
biodegradable, detergents contain
substances which, in large quantities,
can upset the delicate balance of
nature.
The choice of detergent will depend on
the type of fabric (delicates, woollens,
cottons, etc.), the colour, washing
temperature and degree of soiling.
All commonly available washer-dryer
detergents may be used in this
appliance:
• powder detergents for all types of
fabric,
• powder detergents for delicate
fabrics (60°C max) and woollens,
• liquid detergents, preferably for low
temperature wash programmes
(60°C max) for all types of fabric, or
special for woollens only.
The detergent and any additives must
be placed in the appropriate
compartments of the dispenser drawer
before starting the wash programme.
If using concentrated powder or liquid
detergents, a programme without
prewash must be selected.
Pour liquid detergent into the dispenser
drawer compartment marked
just
before starting the programme.
Any fabric softener or starching
additives must be poured into the
compartment marked
before
starting the wash programme.
Follow the product manufacturer’s
recommendations on quantities to use
and do not exceed the «MAX» mark
in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will
depend on the type of fabric, load size,
degree of soiling and hardness of the
water used.
Water hardness is classified in socalled “degrees” of hardness.
Information on hardness of the water in
your area can be obtained from the
relevant water supply company, or from
your local authority.
Follow the product manufacturers’
instructions on quantities to use.
Use less detergent if:
• you are washing a small load,
• the laundry is lightly soiled,
• large amounts of foam form during
washing
Degrees of water hardness
Degrees
Level Characteristic German French
°dH
°T.H.
1
2
3
4
soft
medium
hard
very hard
0-7
8-14
15-21
> 21
0-15
16-25
26-37
> 37
132964080.qxd
14/02/2008
10.50
Pagina
22
22 electrolux International wash code symbol
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Energetic wash
95
60
40
30
Max. wash
temperature
95°C
Max. wash
temperature
60°C
Max. wash
temperature
40°C
Max. wash
temperature
30°C
Delicate wash
60
Bleaching
Bleach in cold water
40
Hand wash
30
40
Do not
wash
at all
Do not bleach
Ironing
Hot iron
max 200°C
Warm iron
max 150°C
Lukewarm iron
max 110°C
Do not iron
Dry cleaning
Dry cleaning
in all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning
in petrol,
pure alcohol
and R 113
Do not
dry clean
high
temperature
low
temperature
Drying
Flat
On the line
On clothes
hanger
Tumble dry
Do not
tumble dry
132964080.qxd
14/02/2008
10.50
Pagina
23
washing programmes electrolux 23
Washing programmes
Programme/
Temperature
Cottons
90°-
+ Prewash
90°-
Synthetics
60°-
Delicates
40°-
Easy Iron
60°-
Description of
programme
Type of laundry
Options
White and coloured
cotton
Spin Reduction/
/
Extra rinse
Main wash
3 rinses
Long spin at the
maximum speed
Max load: 6 Kg
Heavy soiled cotton
items heavily soiled
Spin Reduction/
/
Extra rinse
Prewash, Main wash
3 rinses
Long spin at the
maximum speed
Max load: 6 Kg
Synthetic or mixed
fabrics
Spin Reduction/
/
Extra rinse
Main wash
3 rinses
Short spin
Max load: 3 Kg
/
Extra rinse
Main wash
3 rinses
Short spin
Max load: 3 Kg
Spin Reduction/
/
Extra rinse
Main wash
4 rinses
Short spin
Max load: 1 Kg
Delicate fabrics, for
example curtains.
Synthetic or mixed
fabrics to be ironed
132964080.qxd
14/02/2008
10.50
Pagina
24
24 electrolux washing programmes
Washing programmes
Programme/
Temperature
Type of laundry
Spin
Separate spin for
cottons.
Drain
For emptying out the
last rinse water in
programmes with the
Rinse Hold option.
Rinse
Separate rinse cycle
for cotton hand
washed items.
Silk
30°
Handwash
40°-
Wool
40°-
Description of
programme
Spin Red.
Drain and long spin
at the maximum
speed
Max load: 6 Kg
Draining of water
Spin Reduction/
/
Extra rinse
3 rinses
Long spin at the
maximum speed
Max load: 6 Kg
Silk items to be
gentle washed and
spun.
/
Main wash
2 rinses
Short spin
Max load: 1 Kg
Special programme
for hand washing
fabrics.
Spin Reduction/
/
Main wash
3 rinses
Short spin
Max load: 2 Kg
Spin Reduction/
/
Main wash
3 rinses
Short spin
Max load: 2 Kg
Spin Reduction/
/
Extra rinse
Main wash, 3 rinses
Long spin at the
maximum speed
Max load: 6 Kg
Specially tested
programme for wool
garments bearing
the “Pure new wool,
non-shrink, machine
washable” label.
White and
Cottons Eco coloured cotton
economy, lightly90°-40°
normally soiled
O
Options
For cancelling the
washing programme
which is running and
for switching the
machine off.
132964080.qxd
14/02/2008
10.50
Pagina
25
drying programmes electrolux 25
Drying programmes
Degree of
drying
Type of fabric
Cotton and linen
Extra dry
(bathrobes, bath towels,
Ideal for
towelling materi- etc
als
Cotton and linen
(bathrobes, bath towels,
etc
Store dry (*)
Suitable for
items to put
away without
ironing
Iron dry
Suitable
for ironing
Synthetics and mixed
fabrics (jumpers, blouses, underwear, household linen)
Cotton and linen
(sheets, tablecloths,
shirts, etc.)
(*) The Store dry drying programme
for «Cottons» is the reference programme for the Energy Label data,
in compliance with EC directive
92/75.
Max Load
Spin
speed
Drying
time mins
3 kg
1200 rpm
95-105
1.5 kg
1200 rpm
55-65
3 kg
1200 rpm
85-95
1.5 kg
1200 rpm
45-55
2 kg
900 rpm
70-80
1 kg
900 rpm
35-45
3 kg
1200 rpm
70-80
1.5 kg
1200 rpm
40-50
132964080.qxd
14/02/2008
10.50
Pagina
26
26 electrolux programme information
Programme information
Eco
This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and
the washing time will be extended. This allows to obtain a
good washing efficiency by saving energy.
Easy Iron
Selecting this programme the laundry is gently washed
and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform some additional
rinses. This programme can be used only for cotton and
synthetic fabrics.
Silk
Handwash and
Wool
Delicate washing programme suitable for silk and mixed
synthetics items. Washing temperature is 30°C. The
maximum spin speed is automatically reduced.
When you select this programme, you obtain a particularly
delicate washing for machine washable wool as well as for
hand washable woollens and suitable for articles of clothing
whose label indicates that they must be hand-washed
.
Rinses
With this programme it is possible to rinse and spin cotton
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final spin at
maximum speed.
The spin speed can be reduced by pressing button 3 .
Drain
For emptying out the water of the last rinse in programmes
with the Rinse Hold option.
Turn first the programme selector dial to «O», then select
programme
Drain and press button 8 .
Spin
Separate spin for hand washed garments and after
programmes with Rinse Hold option. Before selecting this
programme the selector dial must be turned to «O». You
can choose the speed by means of the relevant button to
adapt it to the fabrics to be spun.
To reset a programme and to switch off the machine turn
O = Cancelling/OFF the selector dial to O. Now can a new programme be
selected.
132964080.qxd
14/02/2008
10.50
Pagina
27
care and cleaning electrolux 27
Care and cleaning
You must DISCONNECT the appliance
from the electricity supply, before you
can carry out any cleaning or
maintenance work.
Descaling
The water we use normally contains
lime. It is a good idea to periodically
use a water softening powder in the
machine. Do this separately from any
laundry washing, and according to the
softening powder manufacturer's
instructions. This will help to prevent
the formation of lime deposits.
After each wash
Leave the door open for a while. This
helps to prevent mould and stagnant
smells forming inside the appliance.
Keeping the door open after a wash
will also help to preserve the door seal.
Maintenance Wash
With the use of low temperature
washes it is possible to get a build up
of residues inside the drum.
We recommend that a maintenance
wash be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of
laundry.
• Select the hottest cotton wash
programme.
• Use a normal measure of detergent,
must be a powder with biological
properties.
External cleaning
Clean the exterior cabinet of the
appliance with soap and water only,
and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive
dispenser drawer should be cleaned
regularly.
Remove the drawer by pressing the
catch downwards and by pulling it out.
Flush it out under a tap, to remove any
traces of accumulated powder.
C0066
To aid cleaning, the top part of the
additive compartment should be
removed.
C0067
Cleaning the drawer recess
Having removed the drawer, use a
small brush to clean the recess,
ensuring that all washing powder
residue is removed from the upper and
lower part of the recess.
Replace the drawer and run the rinse
programme without any clothes in the
drum.
132964080.qxd
14/02/2008
10.50
Pagina
28
28 electrolux care and cleaning
P1223
P0038
Cleaning the pump
The pump should be inspected if
• the machine does not empty and/or
spin
• the machine makes an unusual noise
during draining due to objects such
as safety pins, coins etc. blocking
the pump.
Proceed as follows:
• Disconnect the appliance.
• If necessary wait until the water has
cooled down.
• open the pump door levering on the
groove with a coin or with the
suitable tool, if supplied, that you can
find in the bag containing the
instruction booklet (or fitted on the
appropriate recess behind the
detergent dispenser drawer
depending on the model).
• pull out the emergency emptying cap
from the filter cover, using a pliers.
P1224
• when no more water comes out,
unscrew the pump cover, using a
pliers, and remove the filter.
2
1
P1225
1
2
P1222
• place a bowl with a small edge close
to the pump to collect any spillage.
Always keep a rag nearby to dry up
spillage of water when removing the
cover.
• Remove any objects from the pump
impeller by rotating it.
132964080.qxd
14/02/2008
10.50
Pagina
29
care and cleaning electrolux 29
• Close the pump door.
P1226
• replace the filter into the pump
paying attention to insert it properly.
When done, screw it firmly
P1227
P1228
• replace the emergency emptying cap
into the filter cover and fix it firmly
P1230
Warning!
When the appliance is in use and
depending on the programme selected
there can be hot water in the pump.
Never remove the pump cover during a
wash cycle, always wait until the
appliance has finished the cycle, and is
empty. When replacing the cover,
ensure it is securely retightened so as
to stop leaks and young children being
able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged.
It is therefore a good idea to clean it
from time to time.
Turn off the water tap. Unscrew the
water inlet hose. Clean the filter using a
hard bristle brush. Tighten up the inlet
hose.
P1229
P1090
132964080.qxd
14/02/2008
10.50
Pagina
30
30 electrolux care and cleaning
The dangers of freezing
If the machine is exposed to
temperatures below 0°C, certain
precautions should be taken:
• pull out the plug from the power
socket;
• turn off the water tap.
• unscrew the inlet hose.
• place a bowl with a small edge close
to the pump to collect any spillage
from the emergency emptying cap.
Place the end of the inlet hose in a
bowl placed on the floor and let
water drain out.
• screw the water inlet hose back on
and reposition the emergency
emptying cap on again into the filter
cover.
• when you intend to start the machine
up again, make sure that the room
temperature is above 0°C.
Important!
Every time you drain the water through
the emergency emptying hose you
must pour 2 litres of water into the
main wash compartment of the
detergent drawer and then run the
drain programme. This will activate the
ECO VALVE device avoiding that part
of the detergent remains unused at
next washing.
Emergency emptying out
If the water is not discharged, proceed
as follows to empty out the machine:
• pull out the plug from the power
socket;
• close the water tap;
• if necessary, wait until the water has
cooled down;
• open the pump door using the
suitable tool;
• place a bowl with a small edge close
to the pump to collect any spillage.
Remove the emergency emptying
cap from the filter cover. The water
should drain by gravity into the bowl.
When the bowl is full, put the cap
back on filter cover. Empty the bowl.
Repeat the procedure until water
stops flowing out;
• clean the pump if necessary as
previously described;
• replace the filter into the pump and
screw it firmly as previously
described;
• replace the emergency emptying cap
into the filter cover and close the
pump door.
132964080.qxd
14/02/2008
10.50
Pagina
31
What to do if... electrolux 31
What to do if...
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the red pilot light of button 8 flashes,
one of the following alarm codes appears on the display and at the same some
acoustic signals sound every 20 seconds to indicate that the machine is not working:
● E10: problem with the water supply
● E20: problem with water draining
● E40: door open.
Once the problem has been eliminated, press button 8 to restart the programme. If
after all checks, the problem persists, contact your local Service Centre.
Malfunction
The washer-dryer does not
start:
Possible cause
The door has not been
closed. E40
● The plug is not properly
inserted in the power
socket.
● There is no power at the
socket.
● The main fuse or the fuse in
the plug has blown.
●
The selector dial is not
correctly positioned and the
button 8 has not been
pressed.
● The «Delay Start» has been
selected.
● The «Child safety lock»
has been selected.
●
Solution
●
Close firmly the door.
●
Insert the plug into the
power socket.
Please check your domestic
electrical installation.
● Replace the fuse.
●
Please turn the selector dial
and press the «Start/Pause»
button again.
● If the laundry are to be
washed immediately, cancel
the delay start.
● Disable the «Child safety
lock»
option.
●
The machine fills then
empties immediately:
●
The end of the drain hose is
too low.
●
Refer to relevant paragraph
in “water drainage” section.
The machine does not fill:
●
The water tap is closed.
●
Open the water tap.
E10
The inlet hose is squashed
or kinked. E10
● The filter in the inlet hose is
blocked. E10
● The door is not properly
closed. E40
●
Check the inlet hose
connection.
● Clean the water inlet hose
filter.
● Close firmly the door.
●
132964080.qxd
14/02/2008
10.50
Pagina
32
32 electrolux What to do if...
Malfunction
The machine does not
empty and/or does not spin:
Solution
Possible cause
The drain hose is squashed
or kinked.E20
● The drain filter is clogged.
●
Check the drain hose
connection.
● Clean the drain filter.
●
E20
●
The option
or
been selected.
●
The laundry is not evenly
distributed in the drum.
The door will not open:
●
No water is visible in the
drum
●
There is water on the floor:
●
has
The programme is still
running.
● The door lock has not been
released.
● There is water in the drum.
Select the programme Spin
or Drain
.
● Redistribute the laundry.
●
Wait the end of washing
cycle.
● Wait for some minutes until
the door lock is released.
● Select drain or spin
programme to empty out
the water.
●
Machines based on modern
technology operate very
economically using very little
water without affecting
performance.
Too much detergent or
unsuitable detergent
(creates too much foam)
has been used.
● Check whether there are
any leaks from one of the
inlet hose fittings. It is not
always easy to see this as
the water runs down the
hose; check to see if it is
damp.
● The drain hose is damaged.
● The emergency emptying
cap has not been replaced
into the filter cover after
cleaning.
●
Reduce the detergent
quantity or use another one.
●
Check the water inlet hose
connection.
●
Change it with a new one.
Put the emergency
emptying cap back into the
filter cover.
●
132964080.qxd
14/02/2008
10.50
Pagina
33
What to do if... electrolux 33
Malfunction
Unsatisfactory washing
results:
The machine vibrates or is
noisy:
The machine makes an
unusual noise
The machine does not dry or
does not dry properly
Possible cause
Too little detergent or
unsuitable detergent has
been used.
● Stubborn stains have not
been treated prior to
washing.
● The correct temperature
was not selected.
● Excessive laundry load.
●
The transit bolts and
packing have not been
removed.
● The support feet have not
been adjusted.
● The laundry is not evenly
distributed in the drum.
● Maybe there is very little
laundry in the drum.
●
●
●
Increase the detergent
quantity or use another one.
●
Use commercial products to
treat the stubborn stains.
Check if you have selected
the correct temperature.
● Introduce into the drum less
laundry.
● Check the correct
installation of the appliance.
●
Check the correct levelling
of the appliance.
● Redistribute the laundry.
●
●
Load more laundry.
●
Select the drying time or the
dryness degree.
●
Open the water tap.
●
Clean the drain filter.
The machine is fitted with a
type of motor which makes
an unusual noise compared
with other traditional
motors. This new motor
ensures a softer start and
more even distribution of
the laundry in the drum
when spinning, as well as
increased stability of the
machine.
The drying time or the
dryness degree has not
been selected
● The water tap is not turned
on (E10)
● The drain filter is clogged
(E20)
● The machine is overloaded.
●
●
Solution
The selected drying
programme, time or
dryness degree was not
suitable for the laundry
Introduce into the drum less
laundry.
● Select the suitable drying
programme, time or dryness
degree for the laundry.
●
132964080.qxd
14/02/2008
10.50
Pagina
34
34 electrolux What to do if...
Malfunction
Spinning starts late or the
machine does not spin:
Possible cause
●
Solution
The electronic unbalance
detection device has cut in
because the laundry is not
evenly distributed in the
drum. The laundry is
redistributed by reverse
rotation of the drum. This
may happen several times
before the unbalance
disappears and normal
spinning can resume. If,
after 10 minutes, the
laundry is still not evenly
distributed in the drum, the
machine will not spin. In this
case, redistribute the load
manually and select the
spin programme.
●
Redistribute the laundry.
Mo
Pro d. .....
d.
No .....
. .....
If you are unable to identify or solve the
problem, contact our service centre.
Before telephoning, make a note of the
model, serial number and purchase
date of your machine: the Service
Centre will require this information.
.
Ser
. No
.....
. .....
....
Mod. ..........
Prod. No. ...........
P0042 BD
Ser. No. .........
132964080.qxd
14/02/2008
10.50
Pagina
35
technical data electrolux 35
Technical data
Dimensions
Width
60 cm
Height
85 cm
Depth
63 cm
Electrical connection Voltage
- Overall power - Fuse
Information on the electrical connection is given on
the rating plate on the inner edge of the appliance
door
Water supply pressure
Minimum
0,05 MPa
Maximum
0,8 MPa
Maximum Load
Cotton
6
kg
Maximum Dry Load
Cotton
Synthetics
3
2
kg
kg
Spin Speed
Maximum
1200 rpm
132964080.qxd
14/02/2008
10.50
Pagina
36
36 electrolux consumption value
Consumption values
Water
consumption
(in litres)
Energy
consumption
(in kWh)
Cottons 90 °
61
2.0
Cottons + Prewash 60°
68
1.45
Synthetics 60°
54
1.0
Delicates 40°
60
0.55
Wool 40°
53
0.4
Cottons Eco 60°
58
1.14
The consumption data shown on this
chart is to be considered purely
indicative, as it may vary depending on
the quantity and type of laundry, on the
inlet water temperature and on the
ambient temperature.
Programme
duration
(in minutes)
For the duration of
the programmes,
please refer to the
display on the
control panel.
Programme
132964080.qxd
14/02/2008
10.50
Pagina
37
installation electrolux 37
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it’s back to
remove the polystyrene base from the
bottom.
A
HEC00022
4. Unscrew and remove the two large
rear bolts B and the six smaller bolts
C.
C
HEC0003S
HEC0008
C
B
B
5. Remove the bracket D and tighten up
the six smaller bolts C. Slide out the
relevant plastic spacer E.
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
D
HEC0011S
E
HEC0001
3. With a suitable spanner unscrew and
remove the central rear bolt A.
C
HEC0023
C
132964080.qxd
14/02/2008
10.50
Pagina
38
38 electrolux installation
6. Open the porthole, take out the inlet
hose from the drum and remove the
polystyrene block on the door seal.
Accurate levelling prevents vibration,
noise and displacement of the machine
during operation.Never place
cardboard, wood or similar materials
under the machine to compensate for
any unevenness in the floor.
HEC0010
7. Fill the smaller upper hole and the two
large ones with the corresponding
plastic plug caps supplied in the bag
containing the instruction booklet.
HEC0005
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around
the machine is not impeded by
carpets, rugs etc. Check that the
machine does not touch the wall or
other kitchen units. Level the washerdryer by raising or lowering the feet.
The feet may be tight to adjust as they
incorporate a self locking nut, but the
machine MUST be level and stable.
If necessary, check the setting with a
spirit level.
Any necessary adjustment can be
made with a spanner.
HEC007S
Water inlet
An inlet hose is supplied and can been
found inside the machine drum. Do not
use the hose from your previous
machine to connect to the water
supply.
1. Open the porthole and extract the
inlet hose.
2. Connect the hose with the angled
connection to the machine.
Do not place the inlet hose
downwards. Angle the hose to the
left or right depending on the
position of your water tap.
HEC0006QL
132964080.qxd
14/02/2008
10.50
Pagina
39
installation electrolux 39
3. Set the hose correctly by loosening
the ring nut.
After positioning the inlet hose, be
sure to tighten the ring nut again to
prevent leaks.
4. Connect the hose to a tap with a 3/4”
thread. Always use the hose supplied
with the appliance.
In a sink drain pipe branch. This
branch must be above the trap so that
the bend is at least 60 cm above the
ground.
Directly into a drain pipe at a
height of not less than 60 cm and not
more than 90 cm. The end of the drain
hose must always be ventilated, i.e.
the inside diameter of the drain pipe
must be larger than the outside diameter
of the drain hose.
The drain hose must not be kinked.
P1088
The inlet hose must not be lengthened. If
it is too short and you do not wish to
move the tap, you will have to purchase
a new, longer hose specially designed
for this type of use.
Water drainage
The end of the drain hose can be
positioned in three ways:
Hooked over the edge of a sink
using the plastic hose guide
supplied with the machine. In this
case, make sure the end cannot come
unhooked when the machine is
emptying. This could be done by tying it
to the tap with a piece of string or
attaching it to the wall.
P0022
P1118
The drain hose may be extended to a
maximum of 4 metres. An additional
drain hose and joining piece is available
from your local Service Centre.
Electrical connection
Information on the electrical connection
is given on the rating plate on the inner
edge of the appliance door.
Check that your domestic electrical
installation can take the maximum load
required, also taking into account any
other appliances in use.
Connect the machine to an earthed
socket.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the
above safety precaution.
132964080.qxd
14/02/2008
10.50
Pagina
40
40 electrolux installation
The appliance is supplied with a
13amp plug fitted. In the event of
having to change the fuse in the plug
supplied, a 13amp ASTA approved
(BS1363/A) fuse must be used.
Should the plug need to be replaced
for any reason, proceed as described
below.
The wires in the mains lead are
coloured in accordance with the
following code:
Green and Yellow......................- Earth
Blue ..........................................Neutral
Brown ......................................- Live
The wire coloured green and yellow
must be connected to the terminal
marked with the letter «E» or by the
earth symbol
or coloured green
and yellow.
The wire coloured blue must be
connected to the terminal marked «N»
or coloured black.
GREEN & YELLOW
13 A
E
N
L
BROWN
BLUE
P1041
CORD CLAMP
The wire coloured brown must be
connected to the terminal marked «L»
or coloured red.
Upon completion there must be no cut,
or stray strands of wire present and the
cord clamp must be secure over the
outer sheath.
Warning!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard.
Ensure that the cut off plug is
disposed of safely. Should the
appliance power supply cable need
to be replaced, this MUST be
carried out by our Service Force
Centre.
Should the appliance power supply
cable need to be replaced, this
MUST be carried out by our
Service Centre.
Please ensure that when the
appliance is installed the power
supply cable is easily accessible.
132964080.qxd
14/02/2008
10.50
Pagina
41
installation electrolux 41
Fitting under a counter
Before any work to the appliance, you
must disconnect the plug from the
power socket.
Important!
For safety reasons, it is dangerous
to fit the appliance under a counter
without the steel plate, which you
can order in your nearest Service
Force Centre.
The top must be fixed to the cabinet as
follows:Unscrew the screws from the
back panel of the appliance. Push the
worktop to the back and raise it to
remove (see the pictures below).
P1241
600
820
600
820
P1240
595
600
132964080.qxd
14/02/2008
10.51
Pagina
42
42 electrolux environment concerns
Environment concerns
Ecological hints
Packaging materials
The materials marked with the symbol
are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by
disposing of them properly in
appropriate collection containers.
Old machine
Use authorised disposal sites for your
old appliance. Help to keep your country
tidy!
The symbol
on the product or on its
packaging indicates that this product
may not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
To save water, energy and to help
protect the environment, we recommend
that you follow these tips:
• Normally soiled laundry may be
washed without prewashing in order to
save detergent, water and time (the
environment is protected too!).
• The machine works more
economically if it is fully loaded.
• With adequate pre-treatment, stains
and limited soiling can be removed;
the laundry can then be washed at a
lower temperature.
• Measure out detergent according to
the water hardness, the degree of
soiling and the quantity of laundry
being washed.
132964080.qxd
14/02/2008
10.51
Pagina
43
132964080.qxd
14/02/2008
10.51
ANC number: 132 964 080-00-072008
Pagina
44
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising