Zanussi | FL984CN | User manual | ZANUSSI FL984CN User Manual

TVÄTTMASKIN
PYYKINPESUKONE
ЫЕШКФДЦТФÅ ЬФfiШТФ
WASHING MACHINE
FL 984 CN
A
B
B
C
40º- 95º
30º- 60º
30º- 40º
D
F
G
H
J
K
L
30º- 60º
30º- 40º
30º- 40º
M
N
P
FL
984CN
BRUKSANVISNING
KÄYTTÖOHJE
КГЛЩМЩВЫЕМЩ ЗЩ ÈЛЫЗДГФЕФСШШ
124974570
INSTALLATION AND INSTRUCTION MANUAL
Your new washing machine
Environment protection
■
Materials marked with the
symbol are recyclable.
To enable them to be recycled, they must be placed in
the appropriate collection areas (or containers). Check
with your local authorities.
>PE<= polyethylene
>PS<= polystyrene
>PP<= polypropylene
Ecological hints
In order to obtain water and energy savings and to
protect the environment, we advice you to follow these
instructions:
■ Whenever possible, wash the maximum load for the
selected programme, without overloading the drum.
■ Use a programme with prewash only for heavy
soiled items.
■ Measure out detergent according to the water
hardness, degree of soiling and quantity of laundry
being washed.
■ Select the Quick Wash programme for lighly soiled
laundry.
Packaging recycling
■
Washing machine scrapping
When the appliance is to be scrapped, cut off the
power supply cable and make the door closing device
inoperative to avoid it becoming a death trap for a
child.
Use an authorised disposal site.
ENGLISH
This new washing machine meets all requirements for
a modern washing of laundry with reduced
consumption of water, energy and detergent.
■ The temperature selector dial allows you to
choose personally the suitable washing temperature
for your laundry.
■ The automatic cooling of the washing water from
95°C to 60°C before draining will prevent plastic
pipes of your drainage system from being
deformed.
53
Contents
Important information
55
Maintenance
Description of the appliance
56
■
56
■
■
■
Detergent dispenser drawer
■
Technical specifications
56
Installation
57
■
■
■
■
■
Unpacking
Positioning
Water inlet
Water drainage
Electrical connection
Use
■
■
■
■
■
54
Control panel
Washing hints
Sorting the laundry
Temperatures
Before loading the laundry
Maximum loads
Laundry weights
Removing stains
Detergents and additives
Quantity of detergent to be used
Washing programmes
Operating sequence
International wash code symbols
57
57
58
58
58
59
59
60
60
60
60
60
60
60
61
61
62-63
64-65
66
■
Bodywork
Detergent dispenser drawer
Water inlet filter
Drain pump
The dangers of freezing
Something not working
67
67
67
67
68
68
69-70
Important information
It is important that this instruction book be kept with the appliance for future reference. If you sell or give the
appliance away, make sure that the book is passed to the new owners so that they can familiarise themselves with
its operation and relevant warnings.
The following warnings are provided in the interests of overall safety. You must read them carefully before
installing or using the appliance.
■
■
■
■
■
■
When unpacking the appliance, check that it is not
damaged. If in doubt, do not use it and contact the
Service Centre.
All internal packing must be removed before using
the appliance. Serious damage may be caused to
the machine or adjacent furniture if the protective
transit devices are not removed or are not
completely removed. Refer to the relevant
paragraph in the instruction book.
Any electrical work required to install this
appliance must be carried out by a qualified
electrician.
Any plumbing work required to install this
appliance must be carried out by a qualified
plumber.
After having installed the machine, check that it is
not standing on its electrical supply cable.
If the appliance is placed on a carpeted floor,
ensure that air can circulate freely between the
adjustable feet and the floor.
■
■
■
■
Service/repair
■
■
Use
■
■
■
■
■
This appliance is designed for domestic use. It
must not be used for purposes other than those for
which it was designed.
Do not overload the appliance. Follow the
instructions in the instruction book.
Only wash fabrics which are designed to be
machine washed. Follow the instructions on each
garment label.
Make sure that all pockets are empty. Objects such
as coins, safety pins, pins and screws can cause
extensive damage.
Do not machine wash garments saturated with
petroleum, methylated spirits, trichlorethylene, etc.
If such fluids have been used to remove stains prior
to washing, wait until they have completely
evaporated from the fabric before placing garments
in the appliance.
Place small items such as socks, belts, etc. in a
cloth bag or pillowcase to prevent them getting
trapped between the drum and the tub.
In the event of a fault, do not attempt to repair the
appliance yourself. Repairs carried out by
inexperienced persons may cause damage.
If repairs are needed, contact an authorised service
centre and ask for genuine spare parts.
Safety
■
■
Use only the recommended quantities of fabric
softener. An excessive amount could damage the
laundry.
Leave the porthole door slightly ajar when the
appliance is not in use. This preserves the door seal
and prevents the formation of musty smells.
Always check that water has emptied out before
opening the door. If not, drain the water following
the instructions in the instruction book.
Always unplug the appliance and shut the water tap
after use.
■
■
This appliance is designed to be used by adults.
Children must not be allowed to touch the controls
or play with the product.
During high temperature wash cycles the glass door
becomes very hot. Do not touch it.
Pets sometimes climb into washing machines.
Check the drum before each use.
55
ENGLISH
Installation
Description of the appliance
1
2
3
4
5
6
7
8
Detergent dispenser drawer
Programme chart
Option buttons
Door opening button
Temperature selector dial
Operating pilot light
Programme selector dial
Adjustable feet
2
A
B
B
C
3 4 5 67
H
40º- 95º
30º- 60º
30º- 40º
J
K
L
30º- 60º
30º- 40º
30º- 40º
M
N
P
D
F
G
F L
1
8
Detergent dispenser drawer
Symbols
Prewash
Main wash
Fabric softener
C0006
Technical specifications
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
32 cm
POWER SUPPLY VOLTAGE/FREQUENCY
TOTAL POWER ABSORBED
MINIMUM FUSE PROTECTION
220-230V/50 Hz
1750 W
10 A
WATER PRESSURE
Minimum
Maximum
5 N/cm2
80 N/cm2
MAXIMUM LOAD
Cotton
Synthetics, delicate fabrics
Woollens
3 kg
1.0 kg
0.7 kg
SPIN SPEED
This appliance complies with the following EEC Directives:
73/23/EEC of 19/02/73 relating to low voltage
89/336/EEC of 03/05/89 relating to electromagnetic compatibility
56
900 rpm
984CN
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit devices so that they
can be refitted if the machine ever has to be
transported again.
1. Using a spanner, unscrew and remove the rear
right-hand bolt and lay the machine on its back,
taking care not to squash the hoses. This can be
avoided by placing one of the corner packing pieces
between the machine and the floor.
2. Release the two plastic bags by removing the
adhesive strip.
3. Carefully remove the right-hand bag (1) then the
left-hand bag (2) by pulling them towards the
centre of the machine.
2
P0648
P0233
P0256
P0020
ENGLISH
P0255
1
4. Set the machine upright and remove the two
remaining bolts from the back.
5. Pull out the three plastic spacers from the holes into
which the bolts were fitted.
6. Plug the open holes with the plugs which you will
find in the plastic bag containing the instruction
booklet.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is
not impeded by carpets, rugs etc. Check that the
machine does not touch the wall or other kitchen units.
Carefully level by screwing the adjustable feet in or
out. Never place cardboard, wood or similar materials
under the machine to compensate for any unevenness
in the floor.
P1051
57
Water inlet
Connect the water inlet hose to a tap with a 3/4" thread
after having inserted the small filter “A” supplied with
the machine.
The other end of the inlet hose which connects to the
machine can be turned in any direction. Simply loosen
the fitting, rotate the hose and retighten the fitting,
making sure there are no water leaks.
The inlet hose must not be lengthened. If it is too short
and you do not wish to move the tap, you will have to
purchase a new, longer hose specially designed for this
type of use.
A
P0003
P0021
Water drainage
The end of the drain hose can be positioned in three
ways:
Hooked over the edge of a sink using the plastic
hose guide supplied with the machine. In this case,
make sure the end cannot come unhooked when the
machine is emptying.
This could be done by tying it to the tap with a piece of
string or attaching it to the wall.
In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least
60 cm above the ground.
Directly into a drain pipe at a height of not less than
60 cm and not more than 90 cm.
The end of the drain hose must always be ventilated,
i.e. the inside diameter of the drain pipe must be larger
than the outside diameter of the drain hose.
The drain hose must not be kinked. Run it along the floor;
only the part near the drainage point must be raised.
P0022
P0023
Electrical connection
This machine is designed to operate on a
220-230 V, single-phase, 50 Hz supply.
Check that your domestic electrical installation can
take the maximum load required (1.75 kW), also
taking into account any other appliances in use.
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to
comply with the above safety precaution.
58
In the event of replacing the electric cable,
please contact our nearest Service Centre.
Use
Control panel
B
B
C
40º- 95º
30º- 60º
30º- 40º
H
D
F
G
J
K
L
30º- 60º
30º- 40º
30º- 40º
M
N
P
F L
1 2 3
4
5
6
9 8 4 C N
7
1 Spin speed reduction button
4 Door opening button
By depressing this button the spin speed is reduced
from 900 to 500 rpm in the cotton programmes and
from 550 to 400 rpm in the gentle programme.
Depress it to open the door.
2 Half-load button
Turn this dial to select the washing temperature.
Position
= cold wash.
By depressing this button when washing a small load
of cottons or linens (max 1.5 kg) you will obtain a
reduction of the water consumption on the rinse cycle.
The machine will carry out 3 rinses instead of 4.
6 Operating pilot light
3 Anti-crease button
By depressing this button on programmes H-J-K-L-M
the water of the last rinse is not emptied out, to prevent
the fabrics from creasing. To drain the water, depress
this button again (the laundry will be gently spun) or
select drain programme “P”.
5 Temperature selector dial
ENGLISH
A
This light is on whilst the machine is operating and
goes out at the end of the programme.
7 Programme selector dial
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
To start the programme, pull the dial outwards, to
switch off the machine, push the dial inwards.
59
i
Washing hints
Sorting the laundry
Follow the wash code symbols on each garment label
and the manufacturer’s washing instructions.
Sort the laundry as follows:
whites, coloureds, synthetics, delicates, woollens.
Temperatures
for normally soiled white cottons and
95°
60°
linen (e.g. tea cloths, towels, tablecloths,
sheets...)
for normally soiled, colour fast garments
(e.g. shirts, night dresses, pyjamas....) in
linen, cotton or synthetic fibres and for
lightly soiled white cotton (e.g.
underwear)
(cold) for delicate items (e.g. net curtains),
30°-40° mixed laundry including synthetic fibres
and woollens bearing the label «pure new
wool, machine washable, non-shrink».
Before loading the laundry
Never wash whites and coloureds together. Whites
may lose their “whiteness” in the wash.
New coloured items may run in the first wash; they
should therefore be washed separately the first time.
Make sure that no metal objects are left in the
laundry (e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks and
poppers. Tie any belts or long tapes.
Remove persistent stains before washing. Rub
particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie
them up in a bag or net.
Maximum loads
Recommended loads are indicated in the programme
charts.
General rules:
cotton, linen: drum full but not too tightly packed
synthetics: drum no more than half full
delicate fabrics and woollens: drum no more than one
third full.
Washing a maximum load makes the most efficient use
of water and energy.
For heavily soiled laundry, reduce the load size.
60
Laundry weights
The following weights are indicative:
bathrobe
1200 g
napkin
100 g
quilt cover
700 g
sheet
500 g
pillow case
200 g
tablecloth
250 g
towelling towel
200 g
tea cloth
100 g
night dress
200 g
ladies’ briefs
100 g
man’s work shirt
600 g
man’s shirt
200 g
man’s pyjamas
500 g
blouse
100 g
men’s underpants
100 g
Removing stains
Stubborn stains may not be removed by just water and
detergent. It is therefore advisable to treat them prior to
washing.
Blood: treat fresh stains with cold water. For dried
stains, soak overnight in water with a special detergent
then rub in the soap and water.
Oil based paint: moisten with benzine stain remover,
lay the garment on a soft cloth and dab the stain; treat
several times.
Dried grease stains: moisten with turpentine, lay the
garment on a soft surface and dab the stain with the
fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with rust stains
which are not recent since the cellulose structure will
already have been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and
fast coloureds only).
Grass: soap lightly and treat with bleach (whites and
fast coloureds only).
Ball point pen and glue: moisten with acetone (*), lay
the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat
stains with methylated spirits. Remove any residual
marks from white fabrics with bleach.
Red wine: soak in water and detergent, rinse and treat
with acetic or citric acid, then rinse. Treat any residual
marks with bleach.
Ink: depending on the type of ink, moisten the fabric
first with acetone (*), then with acetic acid; treat any
residual marks on white fabrics with bleach and then
rinse thoroughly.
Detergents and additives
Good washing results also depend on the choice of
detergent and use of the correct quantities to avoid
waste and protect the environment. Although
biodegradable, detergents contain substances which, in
large quantities, can upset the delicate balance of
nature.
The choice of detergent will depend on the type of
fabric (delicates, woollens, cottons, etc.), the colour,
washing temperature and degree of soiling.
All commonly available washing machine detergents
may be used in this appliance:
– powder detergents for all types of fabric,
– powder detergents for delicate fabrics (60°C max)
and woollens,
– liquid detergents, preferably for low temperature
wash programmes (60°C max) for all types of
fabric, or special for woollens only.
The detergent and any additives must be placed in the
appropriate compartments of the dispenser drawer
before starting the wash programme.
If using concentrated powder or liquid detergents, a
programme without prewash must be selected.
Pour liquid detergent into the dispenser drawer
compartment marked
just before starting the
programme.
Any fabric softener or starching additives must be
poured into the compartment marked
before
starting the wash programme.
Follow the product manufacturer’s recommendations
on quantities to use.
Quantity of detergent to be used
The type and quantity of detergent will depend on the
type of fabric, load size, degree of soiling and hardness
of the water used.
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in your
area can be obtained from the relevant water supply
company, or from your local authority.
Follow the product manufacturers’ instructions on
quantities to use.
Use less detergent if:
– you are washing a small load,
– the laundry is lightly soiled,
– large amounts of foam form during washing.
Degrees of water hardness
Degrees
Level
1
2
3
4
Characteristic
soft
medium
hard
very hard
German
°dH
French
°T.H.
00-07
08-14
15-21
more than 21
00-15
16-25
26-37
more than 37
61
ENGLISH
Tar stains: first treat with stain remover, methylated
spirits or benzine, then rub with detergent paste.
(*) do not use acetone on artificial silk.
Energetic programmes for cotton and linen
Maximum load: 3 kg
Progr.
Temp.
Type of laundry
Cycle description
Prewash
Wash at 40°-95°C
4 rinses
Long spin
A
40°-95°
Whites
with prewash
(heavy soiled)
B
40°-95°
Whites
without prewash
(normally soiled)
Wash at 40°-95°C
4 rinses
Long spin
B
30°-60°
Coloureds without prewash
(normally soiled)
Wash at 30°-60°C
4 rinses
Long spin
C
30°-40°
Quick wash
(lightly soiled laundry)
Wash at 30°-40°C
4 rinses
Long spin
D
Rinses
4 rinses with liquid
additives, if required
Long spin
F
Rinse
1 rinse
Long spin
G
Spin
Drain and long spin
Possible
options
The temperatures indicated are the optimum temperatures for each programme and depend on the type of laundry
and degree of soiling.
Consumptions for washing 3 kg cotton items at 60°C (programme B):
Water
54 litres
Energy 0.92 kWh
Time
130 mins
This data has been calculated with a temperature of incoming water of 15°C.
62
Gentle programmes for synthetics, mixed fibres, delicates
woollens
and
Maximum load: 1 kg, woollens: 0.7 kg
Progr.
Temp.
Type of laundry
Cycle description
Prewash
Wash at 30°-60°C
3 rinses
Short spin
H
30°-60°
Synthetics
with prewash
(heavy soiled)
J
30°-60°
Synthetics without prewash
(normally soiled)
Wash at 30°-60°C
3 rinses
Short spin
K
30°-40°
Delicate fabrics - Silk
Wash at 30°-40°C
3 rinses
Short spin
L
30°-40°
Woollens
Wash at 30°-40°C
3 rinses
Short spin
M
Rinses
3 rinses with fabric softener
Short spin
N
Short spin
Drain and short spin
P
Drain
Draining of water
Possible
options
The temperatures indicated are the optimum temperatures for each programme and depend on the type of laundry
and degree of soiling.
63
i
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door by depressing button
.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into
the main wash compartment
. If you wish to carry
out a prewash, pour detergent into the appropriate
compartment marked
.
C0005
3. Measure out the additive
If required, pour fabric softener into the compartment
marked
without exceeding the «MAX» mark.
C0004
4. Select the desired option(s)
Depress the required button(s).
60
5. Select the temperature
Turn the selector dial to the required temperature
setting.
M0027
64
6. Select the programme and start it
Turn the programme selector dial clockwise to the
required wash programme and pull it outwards: the
operating pilot light comes on and the machine starts
to operate.
B
P0215
B
P0216
7. At the end of the programme
ENGLISH
The machine stops automatically, the operating pilot
light goes out.
It is normal to have to wait for about 2 minutes before
being able to open the door to allow the safety lock to
release.
Depress the programme selector dial to switch the
machine off.
Remove the laundry.
Turn the drum by hand to make sure it is completely
empty, so as to avoid any forgotten items being
damaged in a subsequent wash (e.g. shrinking) or their
colour running into a load of whites.
Release any button which has been depressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
65
i
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
ENERGETIC
WASH
95
60
40
30
Max. wash
temperature
95°C
Max. wash
temperature
60°C
Max. wash
temperature
40°C
Max. wash
temperature
30°C
Hand wash
60
DELICATE
WASH
BLEACHING
IRONING
DRY
CLEANING
40
40
30
Bleach in cold water
Do not wash
at all
Do not bleach
Hot iron
max 200°C
Warm iron
max 150°C
Lukewarm iron
max 110°C
A
P
F
Dry cleaning
in all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning
in petrol,
pure alcohol
and R 113
Do not iron
Do not
dry clean
high
temperature
low
temperature
DRYING
66
Flat
On the line
On clothes
hanger
Tumble dry
Do not
tumble dry
Maintenance
1. Bodywork
Clean the outside of the machine with warm water and
a neutral, non-abrasive household detergent. Rinse
with clean water and dry with
a soft cloth.
Important: do not use methylated spirits, solvents or
similar products to clean the bodywork.
2. Detergent dispenser drawer
After a while, detergents and fabric softeners leave
deposits in the drawer.
Clean the drawer from time to time by rinsing it under
a running tap. To remove the drawer from the machine,
press the button in the rear left-hand corner.
To facilitate cleaning, the top part of the additive
compartments can be removed.
C0002
C0003
ENGLISH
Detergent can also eventually accumulate inside the
drawer recess: clean it with an old toothbrush. Refit the
drawer after cleaning.
P0038
3. Water inlet filter
If you notice that the machine is taking longer to fill,
check that the filter in the water inlet hose is not
blocked.
Turn off the water tap.
Unscrew the hose from the tap and remove the filter.
Clean it with a stiff brush.
Refit the filter and screw the hose back onto the tap.
P0041
67
4. The drain pump
The machine is equipped with a self-cleaning pump
which does not need any maintenance.
5. The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
■
Turn off the water tap.
■
Unscrew the inlet hose.
■
Unhook the drain hose from the rear support and
position the end of this hose and that of the inlet
hose in a bowl. Run the draining programme until
the selector dial is in the “Stop” position.
■
Switch the machine off.
■
Screw the inlet hose and reposition the drain hose.
■
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
68
Something not working
Problems which you can resolve yourself:
Problem
■
■
The machine does not start up:
■
■
■
■
■
The machine does not fill:
■
■
■
■
■
■
■
■
Check that the door is firmly closed.
Check that the machine is plugged in and that there
is power at the socket.
Check that the main fuse has not blown.
Check that the programme selector dial is
positioned correctly and pulled out.
Check that the water tap is open.
Check that water is coming out of the tap.
Check that the inlet hose is not squashed or kinked.
Check that the filter in the inlet hose is not blocked.
Check that the door is closed.
The machine fills then empties
immediately:
■
The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage” section.
The machine does not empty and/or does
not spin:
■
Check that the drain hose is not squashed or kinked.
A gentle programme with anti-crease option
has
been performed.
There is water on the floor:
■
■
■
■
■
Possible cause
Unsatisfactory washing results:
■
■
■
Too much detergent or unsuitable detergent (creates
too much foam) has been used.
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it is
damp.
Check that the drain hose is not damaged.
Too little detergent or unsuitable detergent has been
used.
Stubborn stains have not been treated prior to
washing.
The correct temperature or programme was not
selected.
69
ENGLISH
■
■
Problem
■
■
The machine vibrates or is noisy:
■
■
■
■
■
■
The door will not open:
■
■
■
■
■
Possible cause
Check that all the transit bolts and packing have
been removed.
Check that the machine is not resting against
anything.
Check that the support feet are resting firmly on the
ground.
Check that the laundry is evenly distributed in the drum.
Maybe there is very little laundry in the drum.
The programme is still running.
The door lock has not yet been released, the door
locked light is on.
There is water in drum.
Spinning starts late or the machine does
not spin:
■
The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after 6 minutes, the
laundry is still not evenly distributed in the drum,
the machine will not spin. In this case, redistribute
the load manually and reselect the spin programme.
Water is not visible in the machine:
■
The machine, which is the result of modern
technology, runs in a very economical way with
low water consumption. Performance is
nevertheless excellent.
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make a
note of the model, serial number and purchase date of
your machine: the Service Centre will require this
information.
Mod.
..........
Ser.
Mod. ..........
Prod. No. ...........
P0042
70
Ser. No. .........
Made in EEC
Download PDF

advertising