Zanussi | FL1014V1 | User manual | ZANUSSI FL1014V1 User Manual

ZANUSSI FL1014V1 User Manual
INSTRUCCIONES PARA INSTALACION Y USO
INSTALLATION AND INSTRUCTION MANUAL
LAVADORA
WASHING MACHINE
FL 1014 V1
124977820
YOUR NEW WASHING MACHINE
This new washing machine meets all
requirements for a modern washing of laundry
with reduced consumption of water, energy and
detergent.
■
The temperature selector dial allows you to
choose personally the suitable washing
temperature for your laundry.
■
The automatic cooling of the washing water
from 90°C to 60°C before draining will prevent
plastic pipes of your drainage system from
being deformed.
Ecological hints
In order to obtain water and energy savings and
to protect the environment, we advice you to
follow these instructions:
■
Always wash full loads for maximum savings.
Do not overload the appliance.
■
Use a programme with prewash only for heavy
soiled items.
■
Measure out detergent according to the water
hardness, degree of soiling and quantity of
laundry being washed.
The appliance which you have just bought is
supplied not only with this instruction book, but
also with a Guarantee Card, on the back of which
are written the relative conditions.
Please fill in the necessary details on the Card
and send it to the ZANUSSI Centre relative to
the area in which the appliance is to be installed,
within twenty days of the date of purchase. (See
list of Zanussi network centres).
We congratulate you on your choice.
Carefully read this instruction book and follow
attentively the recommendations it provides, and
thus benefit from years of excellent service.
The appliance which you have just purchased
has been very accurately controlled throughout
the entire manufacturing process. Nevertheless,
should any problem arise during usage, whether
it be during the warranty period, or when such
period has expired, please directly contact your
nearest ZANUSSI Service Centre.
The address and telephone number of said
Centre can be easily found in the enclosed List.
Our ZANUSSI Service Network is at your
complete disposal, to serve you with maximum
speed and efficiency, all you have to do is call.
Protection of the environment
■
Materials marked with the
symbol are
recyclable.
To enable them to be recycled, they must be
placed in the appropriate collection areas (or
containers). Check with your local authorities.
>PE<= polyethylene
>PS<= polystyrene
>PP<=polypropylene
■
When the appliance is to be scrapped, cut off
the power supply cable and make the door
closing device inoperative to avoid it becoming
a death trap for a child.
21
ENGLISH
i
CONTENTS
Important information
. . . . . . . . . . . .23
■
Bodywork . . . . . . . . . . . . . . . . . . . . . . . . . .36
■
Detergent dispenser drawer . . . . . . . . . . . .36
Detergent dispenser drawer . . . . . . . . . . .24
■
Water inlet filter . . . . . . . . . . . . . . . . . . . . .36
■
Drain filter . . . . . . . . . . . . . . . . . . . . . . . . .37
■
The dangers of freezing . . . . . . . . . . . . . . .37
Technical specifications . . . . . . . . . .24
Installation
. . . . . . . . . . . . . . . . . . . . . . .25
■
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . .25
■
Positioning . . . . . . . . . . . . . . . . . . . . . . . . .25
■
Water inlet . . . . . . . . . . . . . . . . . . . . . . . . .26
■
Water drainage . . . . . . . . . . . . . . . . . . . . .26
■
Electrical connection . . . . . . . . . . . . . . . . .26
■
Door reversal & Fitting a door panel . . . . .27
Use
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
■
Control panel
■
Washing hints . . . . . . . . . . . . . . . . . . . . . .29
. . . . . . . . . . . . . . . . . . . . . .28
Sorting the laundry . . . . . . . . . . . . . . . . . .29
Temperatures . . . . . . . . . . . . . . . . . . . . . .29
Before loading the laundry . . . . . . . . . . . .29
Maximum loads . . . . . . . . . . . . . . . . . . . .29
Laundry weights . . . . . . . . . . . . . . . . . . . .29
Removing stains . . . . . . . . . . . . . . . . . . .29
Detergents and additives . . . . . . . . . . . . .30
■
International wash code symbols . . . . . . . .31
■
Washing programmes . . . . . . . . . . . . . .32-33
■
Operating sequence . . . . . . . . . . . . . . .34-35
22
. . . . . . . . . . . . . . . . . . . . . .36
. . . . .24
Description of the appliance
■
Maintenance
Something not working
. . . . . . . .38-39
IMPORTANT INFORMATION
Installation
■
When unpacking the appliance, check that it
is not damaged. If in doubt, do not use it and
contact the Service Centre.
■
All internal packing must be removed before
using the appliance. Serious damage may be
caused to the machine or adjacent furniture if
the protective transit devices are not removed
or are not completely removed. Refer to the
relevant paragraph in the instruction book.
■
■
Any electrical work required to install this
appliance must be carried out by a qualified
electrician.
Any plumbing work required to install this
appliance must be carried out by a qualified
plumber.
■
After having installed the machine, check that
it is not standing on its electrical supply cable.
■
If the appliance is placed on a carpeted floor,
ensure that air can circulate freely between
the adjustable feet and the floor.
Use
■
This appliance is designed for domestic use.
It must not be used for purposes other than
those for which it was designed.
■
Do not overload the appliance. Follow the
instructions in the instruction book.
■
■
■
Only wash fabrics which are designed to be
machine washed. Follow the instructions on
each garment label.
Make sure that all pockets are empty. Objects
such as coins, safety pins, pins and screws
can cause extensive damage.
■
Place small items such as socks, belts, etc. in
a cloth bag or pillowcase to prevent them
getting trapped between the drum and the
tub.
■
Use only the recommended quantities of
fabric softener. An excessive amount could
damage the laundry.
■
Leave the porthole door slightly ajar when the
appliance is not in use. This preserves the
door seal and prevents the formation of musty
smells.
■
Always check that water has emptied out
before opening the door. If not, drain the
water following the instructions in the
instruction book.
■
Always unplug the appliance and shut the
water tap after use.
Service/repair
■
In the event of a fault, do not attempt to repair
the appliance yourself. Repairs carried out by
inexperienced persons may cause damage.
■
If repairs are needed, contact an authorised
service centre and ask for genuine spare
parts.
Safety
■
This appliance is designed to be used by
adults. Children must not be allowed to touch
the controls or play with the product.
■
During high temperature wash cycles the
glass door becomes very hot. Do not touch it.
■
Pets sometimes climb into washing machines.
Check the drum before each use.
Do not machine wash garments saturated
with petroleum, methylated spirits,
trichlorethylene, etc. If such fluids have been
used to remove stains prior to washing, wait
until they have completely evaporated from
the fabric before placing garments in the
appliance.
23
ENGLISH
It is important that this instruction book be kept with the appliance for future reference. If you sell or
give the appliance away, make sure that the book is passed to the new owners so that they can
familiarise themselves with its operation and relevant warnings.
The following warnings are provided in the interests of overall safety. You must read them carefully
before installing or using the appliance.
i
DESCRIPTION OF THE APPLIANCE
01 Detergent dispenser drawer
1
3 4 5
6 7 8
02 Programme chart
03 Spin speed selector dial
04 ON/OFF button
05 Option buttons
2
06 Temperature selector dial
07 Operating pilot light
08 Programme selector dial
9
09 Door handle
10 Drain filter
10
11 Adjustable feet
11
Detergent dispenser drawer
Symbols
Prewash
Main wash
Bleaching agent
Cl
Cl
Fabric softener
P0259
i
TECHNICAL SPECIFICATIONS
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
57 cm
POWER SUPPLY VOLTAGE/FREQUENCY
TOTAL POWER ABSORBED
MINIMUM FUSE PROTECTION
220-230V/50 Hz
2200 W
10 A
WATER PRESSURE
Minimum
Maximum
5 N/cm2
80 N/cm2
MAXIMUM LOAD
Cotton
Synthetics, delicate fabrics
Woollens
4.5 kg
2.0 kg
1.0 kg
SPIN SPEED
1000 rpm
This appliance complies with the following EEC Directives:
73/23/EEC of 19/02/73 relating to low voltage
89/336/EEC of 03/05/89 relating to electromagnetic compatibility
24
INSTALLATION
Unpacking
All transit bolts and packing must be
removed before using the appliance.
ENGLISH
You are advised to keep all transit devices so that
they can be refitted if the machine ever has to be
transported again.
1. Using a spanner, unscrew and remove the rear
right-hand bolt and lay the machine on its
back, taking care not to squash the hoses.
This can be avoided by placing one of the
corner packing pieces between the machine
and the floor.
P0255
2. Remove the polystyrene block from the bottom
of the machine and release the two plastic
bags by removing the adhesive strip.
3. Carefully remove the right-hand bag (1) then
the left-hand bag (2) by pulling them towards
the centre of the machine.
2
P0234
P0233
P0256
P0020
P0254
P0509
1
4. Set the machine upright and remove the two
remaining bolts from the back.
5. Pull out the three plastic spacers from the
holes into which the bolts were fitted.
6. Plug the open holes with the plugs which you
will find at the back of the appliance.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine
is not impeded by carpets, rugs etc. Check that
the machine does not touch the wall or other
kitchen units.
Carefully level by screwing the adjustable feet in
or out. Never place cardboard, wood or similar
materials under the machine to compensate for
any unevenness in the floor.
After having levelled the machine, tighten the lock
nuts.
25
Water inlet
Connect the water inlet hose to a tap with a 3/4"
thread after having inserted the small filter “A”
supplied with the machine.
The inlet hose must not be lengthened. If it is too
short and you do not wish to move the tap, you
will have to purchase a new, longer hose
specially designed for this type of use.
The other end of the inlet hose which connects to
the machine can be turned in any direction.
Simply loosen the fitting, rotate the hose and
retighten the fitting, making sure there are no
water leaks.
A
P0003
Water drainage
The end of the drain hose can be positioned in
three ways:
Hooked over the edge of a sink using the
plastic hose guide supplied with the machine.
In this case, make sure the end cannot come
unhooked when the machine is emptying.
This could be done by tying it to the tap with a
piece of string or attaching it to the wall.
P0022
In a sink drain pipe branch. This branch must
be above the trap so that the bend is at least
60 cm above the ground.
Directly into a drain pipe at a height of not less
than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain
pipe must be larger than the outside diameter of
the drain hose.
The drain hose must not be kinked. Run it along
the floor; only the part near the drainage point
must be raised.
Electrical connection
This machine is designed to operate on a 220230 V, single-phase, 50 Hz supply.
Check that your domestic electrical installation
can take the maximum load required (2.2 kW),
also taking into account any other appliances in
use.
Connect the machine to an earthed socket.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the above
safety precaution.
26
P0023
P0021
Door reversal
6
2
5
7
8
4
A
1 93
P0534
ENGLISH
The opening direction of the outer door on this
washing machine can be reversed. To carry out
this operation, proceed as follows:
1) Disengage the end of the catch (1) from the
door and turn it through 90° to remove it from
its seat (Fig. A).
2) Using a screwdriver, turn plastic plug (2)
through 90° to remove it from its seat (Fig.
A).
3) Fit plug (2) in the hole left free by catch (1)
and turn it through 90° to lock it in place
(Fig. B).
4) Fit catch (1) into the hole from which plug (2)
was removed and turn it through 90°, making
sure that the latching tooth is facing towards
the right (Fig. B).
5) Remove the door by unscrewing the screws
securing it to the bottom hinge (3 - Fig. A).
6) Unscrew the two plastic screws (4 - Fig. A)
and fit them on the opposite side (4 - Fig. B).
7) Remove the catch hook (5 - Fig. A) by
inserting a screwdriver into the upper hole
and pushing downwards.
8) Remove plate (6) by inserting a screwdriver
into the bottom hole and pushing upwards
(Fig. A).
9) Refit the catch hook (5) and plate (6) on the
opposite sides (Fig. B).
10) Remove the door catch (7) and plate (8) as
explained in paragraph 7.
11) Turn the door through 180°.
12) Refit the door catch (7) and plate (8),
reversing their position and pressing firmly to
engage the hook (Fig. B).
13) Fit the door onto the washing machine. Insert
the top pin first, then the bottom pin into the
hinge (3- Fig. B); finally screw the hinge onto
the washing machine.
14) Check that the door is aligned with the
appliance. To do this, loosen screw (9 - Fig.
B) by a couple of turns and re-tighten when
alignment is correct.
15) Fit the flexible end of the door catch
(1 - Fig. B) into the location provided in the
door.
1
5
6
2
4
P0535
7
8
3 9
B
Fitting a door panel
The door of this washing machine has mouldings
to allow fitting of a decorative panel (stainless
steel sheet, laminated plastic, wood etc.) to
match with the existing kitchen units.
The dimensions of the panel must be as follows:
Width
588 mm
Height
588 mm
Maximum thickness 004 mm
To fit the panel, remove the moulding by
unscrewing its fixing screws. Position the panel,
then refit the moulding, making sure that it comes
into contact with and firmly clamps the panel.
27
USE
Control panel
1
2
3 4 5 6
7
8
9
1 Programme chart
5 Half load button
There is a programme guide in Spanish language
on the handle of the detergent dispenser drawer.
Select this button to reduce water consumption
on the rinse cycle when washing a smaller load
of cottons or linens (max. load size=2.25 kg).
2 Spin speed selector dial
This dial has the following positions:
■ 1000 = MAX to 300 = MIN
■
= no spin
For linen and cotton items you can select a spin
speed from 1000 to 300 rpm. For synthetics,
delicates and wool from 550 (MAX) to 300 rpm
(MIN). In the intermediate positions the machine
will spin at decreasing speeds.
3 On/Off button
Press this button to start the machine: the «pilot»
light will come on. The same button is used to
switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the same button.
4 Intensive rinse button
By depressing this button on programmes for
cotton and linen the machine will rinse with more
water.
To be used in areas where the water is very soft
or for people allergic to detergents or who have
very delicate skin.
28
6 Rinse hold button
Press this button to make the machine stop with
water in the drum after the synthetic or delicate
wash cycles.
This prevents any creasing which may take place
if the clothes are left damp in the drum. When it
is convenient for you to empty the machine,
simply press this button again so that the
machine can proceed to drain and spin, or turn
the dial to the drain programme "N".
7 Temperature selector dial
Turn this dial to select the washing temperature.
Position
= cold wash.
8 Operating pilot light
This light is on whilst the machine is operating
and goes out at the end of the programme.
9 Programme selector dial
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
Washing hints
Sorting the laundry
Follow the wash code symbols on each garment
label and the manufacturer’s washing
instructions.
Sort the laundry as follows:
whites, coloureds, synthetics, delicates, woollens.
Temperatures
90°
for normally soiled white cottons and
linen (e.g. tea cloths, towels,
tablecloths, sheets...)
60°
for normally soiled, colour fast
garments (e.g. shirts, night dresses,
pyjamas....) in linen, cotton or
synthetic fibres and for lightly soiled
white cotton (e.g. underwear).
(cold)
30°-40°
for delicate items (e.g. net curtains),
mixed laundry including synthetic
fibres and woollens bearing the label
«pure new wool, machine washable,
non-shrink»
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their “whiteness” in the wash.
New coloured items may run in the first wash;
they should therefore be washed separately the
first time.
Make sure that no metal objects are left in the
laundry (e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks
and poppers. Tie any belts or long tapes.
Remove persistent stains before washing. Rub
particularly soiled areas with a special detergent
or detergent paste.
Treat curtains with special care. Remove hooks
or tie them up in a bag or net.
Maximum loads
Recommended loads are indicated in the
programme charts.
General rules:
cotton, linen: drum full but not too tightly packed
synthetics: drum no more than half full
delicate fabrics and woollens: drum no more
than one third full
Washing a maximum load makes the most
efficient use of water and energy.
For heavily soiled laundry, reduce the load size.
Laundry weights
The following weights are indicative:
bathrobe
napkin
quilt cover
sheet
pillow case
tablecloth
towelling towel
tea cloth
night dress
ladies’ briefs
man’s work shirt
man’s shirt
man’s pyjamas
blouse
men’s underpants
1200 g
100 g
700 g
500 g
200 g
250 g
200 g
100 g
200 g
100 g
600 g
200 g
500 g
100 g
100 g
ENGLISH
i
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable to
treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a
special detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and dab
the stain; treat several times.
Dried grease stains: moisten with turpentine,
lay the garment on a soft surface and dab the
stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with rust
stains which are not recent since the cellulose
structure will already have been damaged and
the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites
and fast coloureds only).
Ball point pen and glue: moisten with acetone
(*), lay the garment on a soft cloth and dab the
stain.
29
Lipstick: moisten with acetone as above, then
treat stains with methylated spirits. Remove any
residual marks from white fabrics with bleach.
Red wine: soak in water and detergent, rinse
and treat with acetic or citric acid, then rinse.
Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the
fabric first with acetone (*), then with acetic acid;
treat any residual marks on white fabrics with
bleach and then rinse thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub with
detergent paste.
(*) do not use acetone on artificial silk
Detergents and additives
Good washing results also depend on the choice
of detergent and use of the correct quantities to
avoid waste and protect the environment.
Although biodegradable, detergents contain
substances which, in large quantities, can upset
the delicate balance of nature.
The choice of detergent will depend on the type
of fabric (delicates, woollens, cottons, etc.), the
colour, washing temperature and degree of
soiling.
All commonly available washing machine
detergents may be used in this appliance:
– powder detergents for all types of fabric,
– powder detergents for delicate fabrics (60°C
max) and woollens,
– liquid detergents, preferably for low
temperature wash programmes (60°C max) for
all types of fabric, or special for woollens only.
The detergent and any additives must be placed
in the appropriate compartments of the dispenser
drawer before starting the wash programme.
If using concentrated powder or liquid detergents,
a programme without prewash must be selected.
Pour liquid detergent into the dispenser drawer
compartment marked
just before starting the
programme.
Any fabric softener or starching additives must be
poured into the compartment marked
before
starting the wash programme.
The bleaching agent (chlorine) can be used only
for white or fast coloured cotton and linen items.
Pour it into the compartment marked
.
Follow the product manufacturer’s
recommendations on quantities to use.
30
Quantity of detergent to be used
The type and quantity of detergent will depend on
the type of fabric, load size, degree of soiling and
hardness of the water used.
Water hardness is classified in so-called
“degrees” of hardness. Information on hardness
of the water in your area can be obtained from
the relevant water supply company, or from your
local authority.
Follow the product manufacturers’ instructions on
quantities to use.
Use less detergent if:
– you are washing a small load
– the laundry is lightly soiled
– large amounts of foam form during washing.
Degrees of water hardness
Degrees
Level
Characteristic
1
2
3
4
soft
medium
hard
very hard
German
°dH
French
°T.H.
0,0-15
00-07
16-25
08-14
26-37
15-21
more than 21 more than 37
i
Wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Energetic wash
95
60
40
30
Max. wash
temperature
95°C
Max. wash
temperature
60°C
Max. wash
temperature
40°C
Max. wash
temperature
30°C
Hand wash
Delicate wash
60
Bleaching
Bleach in cold water
Ironing
Dry cleaning
40
Do not
wash
at all
30
40
Do not bleach
Hot iron
max 200°C
Warm iron
max 150°C
Lukewarm iron
max 110°C
A
P
F
Dry cleaning
in all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning
in petrol,
pure alcohol
and R 113
Do not iron
Do not
dry clean
high
temperature
low
temperature
Drying
Flat
On the line
On clothes
hanger
Tumble dry
Do not
tumble dry
31
Energetic programmes for cotton and linen
Maximum load: 4.5 kg
Progr.
A
Temp.
60°-90°
B(•) 60°-90°
Type of laundry
Cycle description
Whites
with prewash
(heavy soiled)
Prewash
Wash at 60°-90°C
Rinses
Spin
Whites
without prewash
(normally soiled)
Wash at 60°-90°C
Rinses
Spin
B
40°-60°
Fast coloureds
without prewash
(normally soiled)
Wash at 40°-60°C
Rinses
Spin
C
30°-40°
No fast coloureds
(normally soiled)
Wash at 30°-40°C
Rinses
Spin
D
Rinses/Bleaching
Rinses with liquid
additives, if required
Spin
F
Spin
Drain and spin
Possible
options
The temperatures indicated are the optimum temperatures for each programme and depend on the
type of laundry and degree of soiling.
(•) This programme at 60°C is the reference programme for the Energy label according to the EEC
Directive 92/75.
32
Gentle programmes for synthetics, mixed fibres, delicates and woollens
Maximum load: 2 kg, woollens: 1kg
Progr.
Temp.
Type of laundry
Cycle description
Prewash
Wash at 40°-60°C
Rinses
Short spin
G
40°-60°
Synthetics
with prewash
(heavy soiled)
H
40°-60°
Synthetics
without prewash
(normally soiled)
Wash at 40°-60°C
Rinses
Short spin
J
30°-40°
Delicate fabrics - Silk
Wash at 30°-40°C
Rinses
Short spin
K
40°
Woollens
Wash at 40°C
Rinses
Short spin
L
Rinses
Rinses with fabric softener
Short spin
M
Short spin
N
Drain
Possible
option
The temperatures indicated are the optimum temperatures for each programme and depend on the
type of laundry and degree of soiling.
33
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main
wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
P0178
P0004
P0266
P0222
2. Measure out the detergent
3. Measure out the additives
Cl
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent
recommended by the manufacturer in a
graduated cup and pour it into the main wash
compartment
. If you wish to carry out a
prewash, pour detergent into the appropriate
compartment marked
.
If required, pour fabric softener into the
compartment marked
and the bleaching agent
into the compartment marked
without
exceeding the «MAX» mark.
4. Select the desired option(s) and
the spin speed
90
5. Select the temperature
Turn the selector dial to the required temperature
setting.
P0416
34
6. Select the programme and start it
Turn the programme selector dial clockwise to
the required wash programme and press the
start/stop button : the operating pilot light
comes on and the machine starts to operate.
B
P0218
P0412
ENGLISH
7. At the end of the programme
The machine stops automatically, the operating
pilot light goes out.
If you have selected a gentle programme with the
anticrease option
, drain the water before
opening the door.
It is normal to have to wait for about 2 minutes
before being able to open the door to allow the
safety lock to release.
Press the start/stop button again.
Remove the laundry.
Turn the drum by hand to make sure it is
completely empty, so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of
whites.
Release any buttons which have been pressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
35
MAINTENANCE
1. Bodywork
Clean the outside of the machine with warm
water and a neutral, non-abrasive household
detergent. Rinse with clean water and dry with a
soft cloth.
Important: do not use methylated spirits,
solvents or similar products to clean the
bodywork.
2. Detergent dispenser drawer
After a while, detergents and fabric softeners
leave deposits in the drawer.
Clean the drawer from time to time by rinsing it
under a running tap. To remove the drawer from
the machine, press the button in the rear lefthand corner.
Cl
l
C
To facilitate cleaning, the top part of the additive
compartments can be removed.
P0220
Detergent can also eventually accumulate inside
the drawer recess: clean it with an old
toothbrush. Refit the drawer after cleaning.
P0038
3. Water inlet filter
If you notice that the machine is taking longer to
fill, check that the filter in the water inlet hose is
not blocked.
Turn off the water tap.
Unscrew the hose from the tap and remove the
filter.
Clean it with a stiff brush.
Refit the filter and screw the hose back onto the
tap.
36
P0041
P0221
4. Drain filter
The drain filter collects threads and small objects
inadvertently left in the laundry. Check regularly
that the filter is clean.
Open the door of the machine.
Place a container under the filter and unscrew it.
P0178
P0083
P0084
P0040
ENGLISH
Pull out the filter.
Clean the filter under a running tap, then refit it,
screwing it fully in.
5. The dangers of freezing
If the machine is exposed to temperatures below
0°C, certain precautions should be taken.
■ Turn off the water tap.
■ Unscrew the inlet hose.
■ Unhook the drain hose from the rear support
and position the end of this hose and that of
the inlet hose in a bowl. Run the draining
programme until the selector dial is in the
“Stop” position.
■ Disconnect the appliance.
■ Screw the inlet hose and reposition the drain
hose.
■ When you intend to start the machine up
again, make sure that the room temperature is
above 0°C.
37
SOMETHING NOT WORKING
Problems which you can resolve yourself
■
Problem
■
The machine does not start up:
Possible cause
■
■
■
■
■
The machine does not fill:
■
■
■
■
■
■
■
■
The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage”
section.
The machine does not empty
and/or does not spin:
■
Check that the drain hose is not squashed or
kinked.
The drain filter is blocked. Clean it.
The anticrease or no spin option has been
selected.
The wash load is unbalanced.
Redistribute the clothes inside the drum to
allow the machine to spin.
■
■
There is water on the floor:
■
■
■
■
■
Unsatisfactory washing results
■
■
■
38
Check that the water tap is open.
Check that water is coming out of the tap.
Check that the inlet hose is not squashed or
kinked.
Check that the filter in the inlet hose is not
blocked.
Check that the door is closed.
The machine fills then empties
immediately
■
■
Check that the door is firmly closed.
Check that the machine is plugged in and
that there is power at the socket.
Check that the main fuse has not blown.
Check that the programme selector dial is
positioned correctly and that the start/stop
button has been depressed.
Too much detergent or unsuitable detergent
(creates too much foam) has been used.
Check whether there are any leaks from one
of the inlet hose fittings. It is not always easy
to see this as the water runs down the hose;
check to see if it is damp.
Check that the drain hose is not damaged.
Check that the drain filter has been refitted
correctly after cleaning.
Too little detergent or unsuitable detergent
has been used.
Stubborn stains have not been treated prior
to washing.
The correct temperature or programme was
not selected.
Problem
■
The machine vibrates or is noisy:
Possible cause
■
■
■
■
■
■
The door will not open:
■
■
Check that all the transit bolts and packing
have been removed.
Check that the machine is not resting against
anything.
Check that the support feet are resting firmly
on the ground and that the lock nuts are
securely tightened.
Check that the laundry is evenly distributed in
the drum.
Maybe there is very little laundry in the drum.
The programme is still running.
The door lock has not yet been released.
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service
Centre will require this information.
Mod.
..........
Ser.
Mod. ..........
Prod. No. ...........
P0042
Ser. No. .........
39
ENGLISH
■
Z
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising