AEG | LAVAMAT135EL | User manual | Aeg LAVAMAT135EL User Manual

Aeg LAVAMAT135EL User Manual
LAVAMAT 135 EL
Ekolojik Otomatic Çamaçır Makinesi
The environmentally friendly washing-machine
Kullanım kılavuzu
Instruction booklet
LAVAMAT 135 EL
AÇMA
KAPAMA
IPTAL
GECIKTIRME
TUSU
500 700 900
1250
SIKMA
ÖN YIKAMA
K
ANA YIKAMA
ÖN
EK
SUDA
START
YIKAMA DURULAMA BEKLETME ARA VERME
BOSALTMA
AUS ERFAHRUNG GUT
PROGRAM SONU
E
A
H
G
F
SUDA BEKLETME
SIKMA
L
J
DURULAMA
KISA
YIKAMA
D
C
B
Dear customer,
Please read these operating instructions carefully and pay particular
attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and
pass it on to any future owners.
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct
functioning of the appliance.
This symbol guides you, step by step, in the operation of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use of the appliance.
Tips and information about economical and ecological use of the
machine are marked with the clover symbol.
Should any problems arise, this booklet provides instructions on how to
solve them by yourself; see section “Something not working?”.
If this information is not sufficient, please contact our nearest Service
centre (address and telephone numbers are indicated on the enclosed
leaflet).
Printed on recycled paper.
People who think ecologically, act accordingly....
44
Contents
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Discarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Tips for environmental protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Main features of your washing machine . . . . . . . . . . . . . . . . . . . . . . . . . 51
Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
A Mains on light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
B ON/OFF button (AÇMA KAPAMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Buttons and corresponding functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
C DELAY START button (GECIKTIRME TUÇU) . . . . . . . . . . . . . . . . . . . . . . . 54
D Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
E QUICK WASH button (KISA YIKAMA) . . . . . . . . . . . . . . . . . . . . . . . . . . 55
F PREWASH (ÖN YIKAMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
G EXTRA RINSE button (EK DURULAMA) . . . . . . . . . . . . . . . . . . . . . . . . . 55
H Anticrease button (stop with water in drum) (SUDA BEKLETME) . . . . . . 55
J START/PAUSE button (START ARA VERME) . . . . . . . . . . . . . . . . . . . . . . 56
K SPIN SPEED button (SIKMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
L Programme phase indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
M Programme selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Modification of a programme which is running. . . . . . . . . . . . . . . . . . . . . . 57
Opening the door after the programme has started . . . . . . . . . . . . . . . . . . 58
Detergent and additive dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Before the first wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Preparing the wash cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Sorting out and preparing the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Weight of laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Types of fabric and care labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Detergents and additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Which detergent and additive? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
How much detergent? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Liquid detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Adding a water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Information on water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
45
Contents
How to wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Load the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Add detergent and additive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Switching the machine on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Selection of the desired wash programme . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Selection of the spin speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Selection of the PREWASH (ÖN YIKAMA) or QUICK WASH (KISA YIKAMA)
option, depending on the degree of soil of the laundry and on the type of
fabric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Selection of the EXTRA RINSE (EK DURULAMA) or ANTICREASE
(SUDA BEKLETME) option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Selection of the DELAY START option (GECIKTIRME TUÇU) . . . . . . . . . . . . . . . . 66
Starting the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
At the end of the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Programme charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68-69
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
After each wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Periodical cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Bodywork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Drain filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Emergency emptying out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Frost precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Something not working? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Unsatisfactory washing results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Instructions for installation and electrical connection . . . . . . . . . . . . . . 80
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Front view and side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Levelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Water drainage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Permanent connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
46
Safety instructions
The safety of AEG appliances complies with the industry standards and
with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.
General notes
• Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious
danger. Contact our Service Centre or your AEG dealer.
• Never start the machine if the electrical supply cable is damaged or
the control panel or worktop are so damaged that inner components
can be reached.
• Unplug the appliance before carrying out any cleaning or maintenance operations.
• Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
• Never spray the washing machine with a jet of water. Danger of electrocution!
• During high temperature wash programmes the door glass may get
hot. Do not touch it!
• Let the water cool down before carrying out emergency emptying or
before opening the door in an emergency.
• Small animals can gnaw electric wires and water hoses causing electrocution hazard and damage due to water leaks.
Positioning, connection, starting up
• Follow the instructions for positioning and connection.
• Carry out a first wash without laundry (COTTONS 60, with half the
amount of detergent) in order to remove any manufacturing residue
from the tub and the drum.
• Should the machine be purchased in winter, when temperatures can
be below 0°, leave the appliance for 24 hours at ambient temperature
before starting it.
47
Safety instructions
Child safety
• Children are often not aware of how dangerous electrical appliances
can be. When the machine is working, they should be carefully supervised and not be allowed to play with the appliance - there is a risk
that they could become trapped inside.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.
• Make sure that children or pets do not climb into the drum.
• When the appliance is disposed of, pull the plug out of the socket,
cut off the electrical supply cable and destroy the plug with the
remaining cable. Disable the door catch in order to prevent children
from becoming trapped inside while playing.
Proper use
• This appliance is designed for domestic use only. If the machine is
used for any other purposes or is not used correctly, the manufacturer accepts no responsibility for any possible damage that might occur.
• For safety reasons, the appliance must not be modified.
• Use only detergents suitable for washing machines and follow the
manufacturer’s instructions.
• Laundry must not have any trace of inflammable solvents; be particularly careful when washing items that have been previously dry
cleaned.
• Dyes and bleaching agents may only be used if specifically permitted
by the manufacturer of these products. We cannot be held responsible for any damage.
• Use only water supplied from the rising mains. Rainwater or industrial water may only be used if the requirements of standards DIN 1986
and DIN 1988 are complied with.
48
Discarding
Packaging materials
The materials marked with the symbol
are recyclable.
This means that they can be recycled by disposing of them properly in
appropriate collection containers.
For information regarding waste collection points, please contact your
local authorities.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
Machine
To dispose of the appliance correctly, contact the local body responsible for collection.
49
Tips for environmental protection
• Lightly soiled laundry may be washed without prewashing in order to
save detergent, water and time (the environment is protected too!).
• The machine works more economically if it is fully loaded.
• When small loads are washed, use only half to two thirds of the recommended amount of detergent.
• With adequate pre-treatment, stains and limited soiling can be
removed; the laundry can then be washed at a lower temperature.
• Try not to use fabric softeners. If the laundry is machine dried, it will
remain soft even without using fabric softeners.
• If the water has a medium or high degree of hardness (starting from
degree of hardness II, see “Detergents and additives”) water softeners
must be added.
• The amount of detergent can then be adjusted to degree of hardness
I (= soft).
50
Main features of your washing machine
• Selection of the programme and temperature by means of the same
selector knob.
• The Programme phase indicator shows the wash cycle progress.
• The DELAY START option allows you to delay starting of the wash
programme to the desired time of day.
• The ANTICREASE function (stop with water in drum) can be selected
for all fabrics: the laundry is left immersed in the final rinse water to
avoid the formation of creases.
• Because of its gentle washing action, the special wool cycle washes
your garments with extreme care, without felting them.
• 3-compartment drawer for detergent and fabric softener.
• Unbalance detection device: secure position and silent operation of
the appliance.
51
Description of the appliance
Front view
Detergent dispenser drawer
Control panel
LAVAMAT 135 EL
AÇMA
GECIKTIRME
TUSU
KAPAMA
IPTA
500
700 900
1250
SIKMA
ÖN YIKAMA
ANA YIKAMA
J
ÖN
EK
SUDA
START
YIKAMA DURULAMA BEKLETME ARA VERME
SUDA BEKLETME
BOSALTMA
SIKMA
PROGRAM SONU
K
L
H
G
F
DURULAMA
KISA
YIKAMA
D
C
B
Door locked
pilot light
Door
Filter
Adjustable feet
52
Description of the appliance
Control panel
LAVAMAT 135 EL
A
B
C
D
F
BEYAZLAR / RENKLILER
SENTETIKLER
HASSAS ÇAMASIRLAR
YÜNLÜLER
SADECE ÖN YIKAMA
30º- 95º
40º- 60º
30º- 40º
30º- 40º
G
H
J
K
L
HASSAS DURULAMA
KOLALAMA
BOSALTMA
SIKMA
HASSAS SIKMA
AÇMA
KAPAMA
IPTAL
GECIKTIRME
TUSU
500
700
900
1250
SIKMA
ÖN YIKAMA
ANA YIKAMA
J
ÖN
YIKAMA
EK
DURULAMA
SUDA
BEKLETME
START
ARA VERME
SUDA BEKLETME
BOSALTMA
PROGRAM SONU
A =
B =
C =
D =
E =
F =
G =
H =
J =
K =
L =
M=
D
E F G H J K
A
D
SIKMA
A B C
L
H
G
F
DURULAMA
KISA
YIKAMA
K
C
L
B
M
Mains on light
ON/OFF button (AÇMA KAPAMA)
DELAY START button (GECIKTIRME TUÇU)
Display
QUICK WASH button (KISA YIKAMA)
PREWASH button (ÖN YIKAMA)
EXTRA RINSE button (EK DURULAMA)
Anticrease button (stop with water in drum) (SUDA BEKLETME)
START/PAUSE button (START ARA VERME)
SPIN SPEED button (SIKMA)
Programme phase indicator
Programme selector
A Mains on light
This light comes on when the ON/OFF (AÇMA KAPAMA) button is
pressed, and goes out when it is pressed again.
B ON/OFF button (AÇMA KAPAMA)
Press this button to switch the machine on. Press it again to switch the
machine off.
Buttons and corresponding functions
When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the pilot lights flash for about 3 seconds and
the message Err is displayed.
The different options must be selected after choosing the desired programme
and before pressing the START/PAUSE (START ARA VERME) button.
53
Description of the appliance
C DELAY START button (GECIKTIRME TUÇU)
This button allows starting of the machine to be delayed from 1 hour
up to a maximum of 19 hours.
The button must be pressed before pressing the START/PAUSE
(START ARA VERME) button.
The figures indicating the required delay appear for about 2 seconds in
the display next to the button. The duration of the selected wash programme is then displayed. After one minute, the machine starts its
countdown (every hour).
During the last hour, the remaining time is displayed every 5 minutes.
The delayed start function cannot be used with the SPIN (SIKMA) (K)
DELICATE SPIN (HASSAS SIKMA) (L) and EMPTY (BOÇALTMA) (J) programmes.
To modify or cancel the preset delay, press the START/PAUSE (START
ARA VERME) button, then press the DELAY START (GECIKTIRME TUÇU)
button until the required value is displayed or, if you wish to cancel the
delay, until the symbol
h is displayed.
Then press the START/PAUSE (START ARA VERME) button again.
When the delay is cancelled, the display shows the duration of the wash
programme previously selected.
D Display
The display shows the following information:
• if the programme selector knob is on the CANCEL (IPTAL) position,
three flashing dashes appear immediately after pressing the ON/OFF
(AÇMA KAPAMA) button to indicate that the machine is ready to
receive instructions for the required wash programme;
• duration of the selected wash programme, calculated automatically on the basis of the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining is updated every
10 minutes, and every 5 minutes during the last 20 minutes.
• When the programme has finished, three flashing zeros are
displayed;
• delayed start, programmed using the special button (C).
The selected delay (19 hours max.) is indicated in the display. The
countdown is updated every hour, and every 5 minutes during the last
hour.
54
Description of the appliance
• Machine heating phase. A dot to the right of the figures in the
display indicates that the machine is heating the water. During this
phase the user can therefore decide whether to use other electrical
appliances simultaneously.
• incorrect option selection. If an option which is not compatible with
the set wash programme is selected, the message Err is displayed.
E QUICK WASH button (KISA YIKAMA)
By pressing this button the washing time is reduced. For use when
washing lightly soiled laundry.
This option is not available with the wool programme (D).
F PREWASH button (ÖN YIKAMA)
The machine performs a prewash cycle at 40°C max. The prewash cycle
ends with a short spin in programmes for Whites and Coloured cottons
(Beyazlar/Renkliler) (A) and Synthetics (Sentetikler) (B), and with emptying of the water only for Delicate programme (Hassas Çamaçirlar) (C).
This option is not available with the wool programme (D).
For use when washing heavily soiled laundry.
Important: the PREWASH (ÖN YIKAMA) and QUICK WASH (KISA YIKAMA) options cannot be selected together: one automatically disables
the other.
G EXTRA RINSE button (EK DURULAMA)
Can be used with all programmes except the wool programme. The
machine performs 4 rinses instead of 3.
This option is recommended for people who are allergic to detergents
and in areas where the water is very soft.
H Anticrease button (stop with water in drum)
(SUDA BEKLETME)
When this button is pressed, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished,
the corresponding pilot lights (on the programme phase indicator) and
above the button flash to indicate that the water must be emptied out.
To empty out water:
• press the START/PAUSE (START ARA VERME) button: after emptying,
the machine performs the spin cycle required for the type of wash
selected;
55
Description of the appliance
• select the empty programme J to empty out the water without spinning.
Warning! The programme selector knob must be turned first to CANCEL (IPTAL) and then to programme J.
This option can also be selected for the wool programme: the last
rinse water is emptied out but the machine does not spin.
If the water is not emptied out, the machine automatically empties
itself after 18 hours.
J START/PAUSE button (START ARA VERME)
This button has three functions:
a) Start
After having selected the required wash programme, press this button
to start the machine; the corresponding pilot light stops flashing.
b) Pause
To interrupt a programme which is running, press the START/PAUSE
(START ARA VERME) button: the corresponding pilot light and the light
of the programme phase which is running will start to flash.
To restart the programme from the point at which it was interrupted,
press the START/PAUSE (START ARA VERME) button again.
c) Empty out water
At the end of a programme which ends with water in the drum (ANTICREASE option - SUDA BEKLETME), or after the soak programme F,
press the START/PAUSE (START ARA VERME) button to empty out the
water: after a soak programme, the machine will empty only; after
ANTICREASE (SUDA BEKLETME) programmes, the machine will empty
and spin.
K SPIN SPEED button (SIKMA)
Press this button to select the required spin speed, remembering that:
• for cottons (Programmes A) the maximum spin speed is 1250 rpm;
• for synthetics (Progr. B) and wool (Progr. D) the maximum spin speed
is 900 rpm;
• for delicate fabrics (Progr. C) the maximum spin speed is 700 rpm.
56
Description of the appliance
L Programme phase indicator
By selecting the wash programme, the pilot
lights corresponding to the various phases
making up the programme come on.
After the machine has started, only the running phase pilot light stays on. When the
programme has finished, the END (PROGRAM SONU) pilot light comes on.
ÖN YIKAMA
PREWASH
ANA YIKAMA
WASH
DURULAMA
RINSES
SUDA BEKLETME
RINSE HOLD
BOSALTMA
DRAIN
SIKMA
SPIN
PROGRAM SONU
END
M Programme selector
IPTAL
The selector is divided into 5 sectors:
L
K
• Cotton and linen (Beyazlar/Renkliler) (proJ
A
H
grammes A)
G
F
• Synthetics (Sentetikler) (programmes B)
D
• Delicate fabrics (Hassas Çamaçirlar) (proC
B
grammes C)
• Wool (Yünlüler) (programme D)
• Special programmes (programmes F to L)
The selector knob can be turned either clockwise or anticlockwise.
Symbols on the programme selector
• Position E corresponds to the ECONOMY programme.
• The SOGUK position is for a wash with cold water.
Cancelling a programme
To cancel a programme which is running, turn the programme selector
knob to the CANCEL (IPTAL) position: three flashing dashes will be displayed.
Warning! After a programme which ends with water in the drum
(ANTICREASE option - SUDA BEKLETME), turn the selector knob first to
CANCEL (IPTAL) and then to the empty programme J.
Modification of a programme which is running
To modify a programme, first set the machine to PAUSE by pressing the
START/PAUSE (START ARA VERME) button.
Before the machine starts the heating phase, i.e. within the first 15
minutes for cotton programmes, 10 minutes for synthetic and delicate
programmes and 5 minutes for the wool programme, the selected wash
cycle can be modified.
57
Description of the appliance
Warning! If the programme selector knob is turned first to CANCEL
(IPTAL) and then to the new programme, the programme which is running is cancelled, the water is emptied out and the machine re-starts
from water filling. To simply modify the programme which is running,
turn the programme selector knob to the desired position (avoiding the
CANCEL position): when the START/PAUSE (START ARA VERME) button
is pressed again, the machine restarts with the newly selected programme from the point at which it was interrupted.
Opening the door after the programme has started
The door can only be opened before the machine starts the heating
phase (within the first 15, 10 or 5 minutes, depending on the programme selected - see paragraph above) and during the rinse phase.
Set the machine to PAUSE (by pressing the START/PAUSE - START ARA
VERME button).
If the door does not open, this means that the machine is already heating, or that the water level is above the bottom edge of the door.
This prevents large quantities of water from gushing out when the door
is opened.
The door cannot be opened until the pilot light has gone out.
58
Description of the appliance
Detergent and additive dispenser drawer
Compartment for prewash detergent. It is emptied at the beginning of
the wash programme.
Compartment for powder or liquid detergent used for main wash.
It is emptied at the beginning of the wash cycle.
Compartment for liquid additives (fabric softener, starch).
It is emptied at the last rinse.
The quantity of additives must not exceed the «MAX» mark in the
drawer.
Before the first wash
Before your first wash, we recommend that you run a cotton cycle at
60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the
machine.
59
Preparing the wash cycle
Sorting out and preparing the laundry
• Sort out the laundry according to type of fabrics and care labels (see
“Types of fabric and care labels”).
• Empty pockets.
• Remove any metal parts (safety pins, clips, etc.).
• To prevent the laundry from getting damaged and forming bundles,
it is advisable to close zips, button up pillowcases and quilt covers and
tie up loose straps such as those of aprons.
• Turn double faced items inside out (sleeping bags, anoraks, etc.)
• Turn coloured knitted fabrics, woollens and fabrics with trim inside
out.
• Wash small and delicate items (baby socks, tights) inside a laundry net
or in a pillow case closed with a zip, or in larger socks.
• Treat curtains with special care. Remove all metal or plastic hooks or
put them in a net or a bag. We decline any responsibility in case of
damage.
• Whites and coloureds must be washed separately: white items can
loose their whiteness.
• New coloured fabrics often have excess dyes; it is advisable to wash
them separately for the first time.
• Wash small and large items together; this improves the washing result
and the laundry is better distributed during spinning.
• Shake out garments before putting them into the machine.
• Insert each garment separately.
60
Preparing the wash cycle
Weight of laundry
Sort of laundry
Approximate
dry weights
Bathrobes
1200 g
Work shirts
300-600 g
Quilt covers
700 g
Sheets
500 g
Blouses
100 g
Hand towels
200 g
Tea towels
100 g
Shirts
200 g
Pillowcases
200 g
Night-gowns/Pyjamas
200-250 g
Tablecloths
200-300 g
Underwear
250 g
Types of fabric and care labels
The labels on garments help you to select the most suitable wash programme. The laundry should be sorted out according to the type of fabric and the instructions indicated on care labels.
Temperatures indicated on labels are always maximum temperatures.
Whites 95
Linen and cottons marked with this symbol can be washed at high temperatures.
Coloureds 60
Linen and cottons marked with this symbol are colourfast and can be
washed at 60°C.
Coloureds 40 30
Garments marked with these symbols have delicate colours, therefore
the washing temperature must not exceed these values.
Synthetics 40 60
Mixed and synthetic fabrics marked with these symbols require a delicate wash programme and they must therefore be washed using the
specific programme.
61
Preparing the wash cycle
Delicates 40 30
Microfibres, synthetics or curtains marked with these symbols require a
particularly delicate treatment.
The DELICATES programme (HASSAS ÇAMAÇIRLAR) is suitable for this
type of fabric.
Woollens and particularly delicate items 40
Fabrics such as wool, wool mix or silk marked with this symbol are particularly sensitive to machine washing.
The WOOLLENS programme (YÜNLÜLER) is suitable for this type of fabric.
Fabrics marked with the
symbol (wool) can be machine washed only
if the label indicates “does not felt” or “machine washable”.
If the label has the symbol
(hand wash) or
(do not wash), garments must not be machine washed!
62
Preparing the wash cycle
Detergents and additives
Which detergent and additive?
Use only detergents and additives for washing machines. Follow the
manufacturer’s instructions.
How much detergent?
The quantity depends on:
• the load:
if the manufacturer does not provide any indications on the amount of
detergent for small loads, use about one third less than the suggested
amount for half loads and half the amount for very small loads;
• the degree of soil:
use a small amount of detergent for lightly soiled garments. Judge
the amount according to the detergent manufacturer’s instructions
and size of the load;
• the water hardness:
the harder the water, the more detergent required. Instructions
according to water hardness are given on the detergent pack.
Liquid detergent
Liquid detergent can be poured directly into the main wash compartment
of the dispenser drawer immediately before starting the programme, or
a special dispenser can be used that is placed directly in the drum. Measure the detergent according to the manufacturer’s instructions.
Adding a water softener
A water softener must be added when water has a medium-high degree
of hardness (from degree of hardness II). Follow the manufacturer’s
instructions. The quantity of detergent can then always be adjusted to
degree of hardness I (= soft). Information on water hardness can be
obtained from your local water supply authority.
Information on water hardness
Degree of hardness
German degrees °dH French degrees °TH
I=Soft
0-7
0-15
II=Medium
7-14
16-25
III=Hard
14-21
26-37
more than 21
more than 37
IV=Very hard
63
How to wash
Load the laundry
Open the door.
Place the laundry in the drum, one item at a time. Distribute laundry as
evenly as possible. Close the door.
Add detergent and additive
Pull the drawer
out till it stops.
Pour the main
wash detergent
into compartment .
If you wish to
perform a prewash, pour detergent also into compartment .
Pour the fabric softener into compartment
“MAX” mark.
Close the drawer, pushing it fully in.
without exceeding the
Switching the machine on
To switch the
AÇMA
KAPAMA
machine on, press
the ON/OFF
(AÇMA KAPAMA)
button: if the
programme selector knob is on the
CANCEL (IPTAL)
position, three
flashing dashes
will be displayed. If the programme selector knob is positioned on a
wash programme, the duration of that programme will be displayed.
64
How to wash
Selection of the desired wash programme
Turn the programme selector
knob to the
desired position:
the lights corresponding to the
different phases
making up the
selected programme light on.
IPTAL
J
K
ÖN YIKAMA
ANA YIKAMA
L
DURULAMA
A
H
G
F
SUDA BEKLETME
BOSALTMA
D
C
PREWASH
WASH
RINSES
RINSE HOLD
DRAIN
SIKMA
SPIN
PROGRAM SONU
END
B
Selection of the spin speed
To select the desired spin speed, press the
SPIN SPEED (SIKMA) button: the corresponding light comes on.
Selection of the PREWASH
(ÖN YIKAMA) or QUICK WASH
(KISA YIKAMA) option, depending on the
500
700
900
1250
SIKMA
KISA
YIKAMA
ÖN
YIKAMA
EK
DURULAMA
SUDA
BEKLETME
degree of soil of the laundry and on the type of fabric.
The corresponding light comes on.
Selection of the EXTRA RINSE
(EK DURULAMA) or ANTICREASE
(SUDA BEKLETME) option
The corresponding light(s) come on.
65
How to wash
Selection of the DELAY START option (GECIKTIRME TUÇU)
To delay starting of a programme, press the
GECIKTIRME
TUSU
DELAY START (GECIKTIRME TUÇU) button
before starting the machine. The figures
corresponding to the selected delay will be
displayed for about 2 seconds, after which
the duration of the selected programme will appear on the display.
When the START/PAUSE (START ARA VERME) button is pressed, the
selected delay will again appear on the display and the machine starts
its countdown.
Starting the programme
To start the selected programme, press the
START/PAUSE (START ARA VERME) button; the
corresponding light stops flashing and the door
locked pilot light comes on to indicate that the
door locking safety device is in operation.
The pilot light corresponding to the wash phase
which is running also comes on.
After about 30 seconds the programme starts.
66
START
ARA VERME
How to wash
At the end of the programme
The machine stops automatically and three flashing zeros are displayed.
The END (PROGRAM SONU) and spin speed pilot lights, as well as the
pilot light(s) corresponding to the selected option(s), stay on.
If the ANTICREASE (SUDA BEKLETME) option has been selected, the
corresponding pilot light on the programme phase indicator flashes to
indicate that the water must be emptied out before opening the door.
The pilot light of the START button flashes and tree flashing zeros are
displayed.
Release of the lock is indicated by an audible signal as well as the
pilot light going out.
Switch the machine off by pressing the ON/OFF (AÇMA KAPAMA) button.
Turn the programme selector knob to CANCEL (IPTAL).
Remove the laundry from the drum
Check that the drum is empty so as to avoid a subsequent wash being
damaged by any forgotten items.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleasant smells.
67
Programme chart
Wash programmes
Wash
Temp.
programme
Fabrics
Cotton and linen,
for example norA
mally soiled work
Whites 95°-60°
garments, sheets,
(Beyazlar)
household linen,
underwear, towels.
A E
Whites
ECONOMY
(Beyazlar
Ekonomik)
A
Coloured
cottons
(Renkliler)
Additional
functions
Consumption*
Max.
Energy
Water Duration
load
Kwh
lt.
min.
KISA YIKAMA
ÖN YIKAMA
EK DURULAMA 5 kg
SUDA BEKLETME
SIKMA
1.9
44
155
Cotton and linen, for
EK DURULAMA
example normally to
SUDA BEKLETME 5 kg
lightly soiled sheets
SIKMA
and household linen.
1.7
41
155
KISA YIKAMA
60°-50°
Coloured cotton or ÖN YIKAMA
40°-30°
linen fabric, shirts, EK DURULAMA 5 kg
COLD
underwear, towels. SUDA BEKLETME
(SOGUK)
SIKMA
1.07
41
128
1.0
55
85
0.5
50
60
0.4
47
60
60°
Synthetic fabrics,
60°-50°
underwear,
B
40°-30°
coloured garments,
Synthetics
COLD
non-shrink shirts,
(Sentetikler)
(SOGUK)
blouses.
KISA YIKAMA
ÖN YIKAMA
EK DURULAMA 2 kg
SUDA BEKLETME
SIKMA
KISA YIKAMA
C
ÖN YIKAMA
Delicates
Delicate fabrics, for
EK DURULAMA 2 kg
40°-30°
(Hassas
example curtains.
SUDA BEKLETME
Çamaçirlar)
SIKMA
Wool garments bearing
D
40°-30
the “Pure new wool,
SUDA BEKLETME
Wool
COLD
1 kg
non-shrink, machine
SIKMA
(Yünlüler) (SOGUK) washable” label.
ECONOMY
Select the economy programme “E” instead of the 95°C programme when washing normally soiled whites; the wash is carried out at about 60°C, with consequent energy saving. The washing time will be slightly longer.
In compliance with EC directive 92/75, the consumption figures indicated on the
energy label refer to the 60°C wash programme for coloured cottons (A).
* The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet
water temperature and on the ambient temperature. It corresponds to the highest temperature for each wash programme.
68
Programme chart
Special programmes
Programme
Type of
laundry
Programme phases
Consumption*
Additional Max.
Energy
Water Duration
functions load
Kwh
lt.
min.
Soak at 40°C.
Stop with water in drum.
To empty only: press the
START/PAUSE button.
F
Heavily soiled To empty and spin:
Soak
select the desired spin
fabrics,
(Sadece ön
except wool. speed and press the
yıkama)
START/PAUSE button.
The machine automatically empties itself after
18 hours.
G
Delicate
rinses
(Hassas
durulama)
H
Starch, fabric
softener
(Kolalama
yumuçatıcı)
5 kg
0.6
23
25
EK DURULAMA
SUDA BEKLETME 5 kg
SIKMA
0.02
40
20
Hand washed
1 rinse with liquid addigarments to
SUDA BEKLETME
tive.
5 kg
be starched
SIKMA
Spin.
or softened.
0.03
15
20
/
-
-
2
5 kg
-
-
4
2 kg
-
-
1.30
This programme can
be used for
rinsing hand
washed garments.
3 rinses with liquid
additive.
Short spin.
(700 rpm max)
For emptying
out the last
J
rinse water in The water is emptied
Empty
programmes out.
(Boçaltma)
with the Anticrease option.
K
Spin
(Sıkma)
Separate spin
Spin.
for all fabrics.
SIKMA
Separate spin
L
for synthetics Short spin.
Short spin
SIKMA
and delicate (700 rpm max)
(Hassas sıkma)
fabrics.
For cancelling the wash proCancel (Iptal) Cancel.
gramme which is running.
* The consumption data shown on this chart is to be considered purely
indicative, as it may vary depending on the quantity and type of laundry,
on the inlet water temperature and on the ambient temperature.
69
Cleaning and maintenance
After each wash
At the end of the wash programme, pull the dispenser drawer out a little to let it dry.
Leave the door ajar to allow air to circulate.
If the machine is not used for a prolonged period:
Close the water tap(s) and unplug the appliance.
Periodical cleaning
Bodywork
Clean the outside of the machine with warm water and a neutral, nonabrasive household detergent. Rinse with clean water and dry with a
soft cloth.
Important: do not use methylated spirits, solvents or similar products
to clean the bodywork.
Detergent dispenser drawer
After a while,
detergents and
fabric softeners
leave deposits in
the drawer.
Clean the drawer,
from time to
time, by rinsing it
under a running
tap. To remove
the drawer from the machine, press the button in the rear left-hand
corner.
To facilitate cleaning, the top part of the additive compartment can
be removed.
Detergent can also accumulate inside the
drawer recess: clean it with an old toothbrush. Refit the drawer after cleaning.
70
Cleaning and maintenance
Drain filter
The drain filter
collects threads
and small objects
inadvertently left
in the laundry.
Check regularly
that the filter is
clean.
Open the filter
door.
Place a container under the filter and unscrew it; some water will come
out of the filter.
Pull out the filter.
Clean the filter
under a running
tap, then refit it,
screwing it fully in.
Water inlet filter
If you notice that the machine is taking
longer to fill, check that the filter in the
water inlet hose is not blocked.
Turn off the water tap.
Unscrew the hose from the tap and remove
the filter.
Clean it with a stiff brush.
Refit the filter and screw the hose back onto
the tap.
71
Cleaning and maintenance
Emergency emptying out
If the water is not discharged (pump is blocked, filter or drain hose are
clogged), proceed as follows to empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled;
• place a bowl on the floor;
• put the drain hose end into the bowl and let the water come out.
Should it not be possible to have access to the drain hose because, for
example the appliance is built in the kitchen furniture, slightly loosen
the drain filter after placing a bowl on the floor to let the water come
out slowly.
At the end screw the filter again.
Frost precautions
If the machine is installed in a place where the temperature could drop
below 0°C, proceed as follows:
• Close the water tap and unscrew the water inlet hose from the tap.
• Place the end of the drain hose and the inlet hose in a bowl placed
on the floor.
• Select the “empty” programme J and run it until the machine stops.
• Turn the programme selector to CANCEL (IPTAL).
• Press the ON/OFF (AÇMA KAPAMA) button.
• Remove the plug from the power socket.
• Screw the water inlet hose back on and put the drain hose back in its
place.
By doing this, any water remaining in the machine is removed, avoiding the formation of ice and, consequently, breakage of the parts
involved.
When you use the machine again, make sure that the ambient temperature is above 0°C.
72
Something not working?
If, during the spin cycle, the machine makes an unusual
whistling noise, different from the noise made
by traditional washing machines, this is due to
a new type of motor.
If water is not visible in the drum, this is due to
the modern technology of new washing
machines that use less water than traditional
machines.
Troubleshooting
If a problem arises, you can try to solve it yourself following the
instructions below. If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the callout will be charged even if requested within the guarantee period.
During machine operation the following alarm codes may be displayed:
- E00: problem with the water supply
- E10: problem with water draining
- E20: door open
Once the problem has been eliminated, press the START/PAUSE button
to restart the programme. If after all checks, the problem persists, contact your local Service Centre.
Problem
Possible cause
The ON/OFF (AÇMA
KAPAMA button) has not
been depressed.
The main electrical fuse
has blown.
The door is not properly
closed (E20).
The machine does not work
The plug is not connected.
The START ARA VERME
button has not been pressed.
The programme selector
has not been set correctly.
The GECIKTIRME TUÇU
option has been selected.
Solution
Depress the button.
Replace the fuse.
Close the door; the click
of the lock should be heard.
Insert the plug.
Press the button.
Set the selector to the
chosen programme.
Check the selected delay on
the display.
73
Something not working?
Problem
Possible cause
Solution
The water tap is closed (E00). Open the water tap.
The water inlet hose is
squashed or kinked (E00).
The machine does not fill
The machine fills then
empties immediately
Check the whole length of the
hose and remove the kink.
The small filter of the water Clean the filter.
inlet hose is clogged (E00).
The door is not properly
closed (E20).
Close the door.
The end of the drain hose
is too low.
Place the hose at the right
height (see Installation
section).
The drain hose is
squashed or kinked (E10).
Check the whole length of
the hose and remove the
kink.
The drain filter or the
Clean the filter or check
drain hose are clogged (E10). the hose.
The machine does not
empty and/or does not spin The SUDA BEKTLEME option
(stop with water in drum)
has been selected.
There is water on the floor
74
Empty out the water by
pressing the START ARA
VERME button or selecting
the empty programme.
The laundry is not evenly
distributed inside the drum.
Too much detergent has
been used.
Redistribute the laundry
manually in the drum.
Measure detergent
according to the
manufacturer’s instructions.
An unsuitable detergent
has been used that
creates too much foam.
Use a suitable washing
machine detergent.
One of the connectors on
the water inlet hose is
leaking.
Check that the hose is
firmly screwed on at both
ends.
The drain filter has not
been properly screwed on
after cleaning.
Fully screw the filter into
place.
Something not working?
Problem
The machine vibrates or is
noisy
Possible cause
Solution
The transit bolts have
not been removed.
Check that the machine
has been unpacked as
described in the Installation
section.
The feet have not been
adjusted.
Carefully level the machine.
There is little laundry in
the drum.
Correct operation of the
machine is not affected.
The machine is in contact
with the wall or furniture.
Move the machine slightly
away from the wall or
furniture.
The programme is still
running.
Wait until the end of the
programme before opening
the door.
The door lock has not yet
released.
Wait about 2 minutes for
the door lock to release.
The door cannot be opened
until the pilot light located
next to the door handle
has gone out.
The water level is above the
bottom edge of the door.
Before opening the door,
the water must be emptied
out.
The door will not open
The machine is heating the Wait until the end of the
water.
heating phase.
75
Something not working?
Problem
Spinning starts late or the
machine does not spin
76
Possible cause
Solution
The unbalance detection
device that prevents
excessive vibration during
spinning and ensures a
stable position has cut in.
If the laundry is not evenly
distributed inside the drum
at the beginning of the
spin cycle, the machine
detects this and tries to
redistribute it more evenly
by means of a few drum
rotations.
Only when the laundry is
more evenly distributed
will the spin cycle be
performed, eventually at a
lower speed, if the laundry is
not yet evenly distributed.
If, after about 15 minutes,
the laundry is still tangled,
the machine will not spin.
Therefore, if the laundry is
still wet at the end of the
cycle, it is advisable to
redistribute it manually
inside the drum and to
select the spin programme
again.
Something not working?
Unsatisfactory washing results
If the laundry looks grey and lime scale is found in the drum
• Too little detergent has been used.
• An unsuitable detergent has been used.
• Stubborn stains have not been treated prior to washing.
• The programme/temperature have not been correctly selected.
If grey stains remain on the laundry
• Laundry stained with ointments, grease or oil has been washed with
an insufficient amount of detergent.
• The temperature selected for the wash programme was too low.
• Fabric softener - especially the concentrated type - has come into
direct contact with the laundry. Wash these stains immediately and
pour fabric softener carefully.
Foam is still visible even after the last rinse
• Modern detergents often produce foam, even in the last rinse. However the laundry has been completely rinsed.
White residue is left on the laundry
• This is due to insoluble components in modern detergents and is
therefore not the result of insufficient rinsing. Shake or brush the
laundry. In future, it may be better to turn garments inside out before
washing them. Check the choice of detergent; try using liquid detergents.
77
Technical data
Height x Width x Depth
Depth with door opened
Height adjustment
Net weight
Load (depending on programme)
Use
Drum speed during washing
Drum speed during spinning
Water pressure
85x60x60 cm
93 cm
± 13 mm approx.
71 kg approx.
5 kg max.
domestic
max. 55 rpm
1250/900/700 rpm max.
1 - 10 bar
2
(=10-100N/cm = 0.1-1.0Mpa)
This appliance complies with the following EC directives:
- 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive
93 / 68 / EEC
- 89/336/EEC of 3.5.1989 “Electromagnetic Compatibility Directive”.
78
Service
In the section “Something not working?” some problems that can be
solved by yourself are listed. Read this section in the event of problems.
If you are not able to find a solution, contact the Service centre.
(Addresses and telephone numbers are given on the enclosed leaflet).
In all cases, set your speech before calling, in order to facilitate troubleshooting: the engineer will be able to decide whether a service call
is necessary.
Take note of the serial number (F-Nr.) and the product number (Prod.
No.) indicated on the rating plate.
F-Nr. . . . . . . . . . . . . . . . . . . . . . . . .
Prod. No. . . . . . . . . . . . . . . . . . . . . .
Mod. LAVAMAT 135 EL Type P6327608
Prod. No 914849525 00
10 A
220-230V~ 50Hz 2200 W
F-Nr.
Furthermore, try to specify, as precisely as possible:
- The symptoms of the fault
- When the fault occurs
When can a service visit be charged during the guarantee period?
- when it should have been possible to solve the problem by yourself,
with the help of the troubleshooting chart (see section “Something
not working?”)
- when the engineer has to come out several times because he has
not been given all the relevant information he needs and so, for
example, has to fetch spare parts. Repeated trips can be avoided if
you prepare your call to the Service centre as described above.
79
Instructions for installation and electrical connection
Safety instructions
• When unpacking the appliance, check that it is not damaged. If in
doubt, do not use it and contact the retailer.
• All internal packing must be removed before using the appliance.
Serious damage may be caused to the machine or adjacent furniture
if the protective transit devices are not removed or are not completely
removed. Refer to the relevant paragraph.
• Any electrical work required to install this appliance must be carried
out by a qualified electrician.
• Any plumbing work required to install this appliance must be carried
out by a qualified plumber.
• After having installed the machine, check that it is not standing on
its electrical supply cable.
• If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the adjustable feet and the floor.
• The power supply cable must be replaced only by our Service Centre.
80
Dimensions of the appliance
Front view and side view
600
935
606
LAVAMAT 135 EL
AÇMA
KAPAM
IPTA
GECIK
TIRME
50
70
900
125
SIKM
ÖN YIKAMA
ANA YIKAMA
DURULAMA
KISA
YIKAMA
ÖN
EX
SUDA
START
YIKAMA DURULAMA BEKLETME ARA VERME
SUDA
BEKLETME
J
K
L
H
G
F
BOSALTMA
SIKMA
C
B
10
90
835
25
566
Rear view
335
40
170
50
Cold water
Power supply
cable
Drain hose
45
85
81
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
Using a spanner, unscrew and remove the
rear right-hand bolt and lay the machine on
its back, taking care not to squash the hoses.
This can be avoided by placing one of the
corner packing pieces between the machine
and the floor.
Remove the
polystyrene
block from the
bottom of the
2
machine and
1
release the two
plastic bags by
removing the
adhesive strip.
Carefully remove
the right-hand bag (1) then the left-hand bag (2) by pulling them towards
the centre of the machine.
Set the machine
upright and
remove the two
remaining bolts
from the back.
Pull out the
three plastic
spacers from the
holes into which
the bolts were fitted.
Plug the open holes with the plugs which you will find at the back of the
appliance.
You are advised to keep all transit devices so that they can be refitted
if the machine ever has to be transported again.
82
Installation
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by
carpets, rugs etc. Check that the machine does not touch the wall or
other kitchen units.
• The floor surface must be clean and dry, without any wax or polish
residue to avoid any possibility of sliding. Do not use viscous substances to move the appliance into place by sliding it across the floor.
• It is inadvisable to place the machine on long-haired rugs or carpet
or on layers of foam-rubber as this would affect its stability.
• Before placing it on small tiles, apply a rubber coating.
• If the appliance is positioned on flexible floors, especially wooden
beams with flexible floorboards, use a 15 mm thick, water resistant
panel of wood, screwed to at least two of the floor beams. If possible, position the machine in a corner of the room, where the beams
are more solidly fixed and tend to be more stable.
• Never try to correct any unevenness in the floor by putting pieces of
wood, cardboard or similar materials under the machine.
• If it is impossible to avoid positioning the machine next to a gas
cooker or coal-burning stove, an insulating panel (85x57 cm) covered
with aluminium foil on the side facing the cooker or stove, must be
inserted between the two appliances;
• The machine must not be installed in rooms where the temperature
can drop below 0.
• The water inlet hose and the drain hose must not be kinked.
Levelling
Carefully level by
screwing the
adjustable feet in
or out. Never
place cardboard,
wood or similar
materials under
the machine to
compensate for
any unevenness in the floor.
After having levelled the machine, tighten the lock nuts.
83
Installation
Directly into a
drain pipe at a
height of not less
than 60 cm and
not more than
90 cm.
The end of the
drain hose must always be ventilated, i.e. the inside diameter of the
drain pipe must be larger than the outside diameter of the drain hose.
The drain hose must not be kinked. Run it along the floor; only the part
near the drainage point must be raised.
Electrical connection
This machine is designed to operate on a 220-230 V, single-phase,
50 Hz supply.
Check that your domestic electrical installation can take the maximum
load required (2.2 kW), also taking into account any other appliances in
use.
Connect the machine to an earthed socket.
The manufacturer declines any responsibility for damage or injury
through failure to comply with the above safety precaution.
Permanent connection
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3 mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any
point.
This operation has only to be performed by a qualified electrician.
85
Installation
Water inlet
Connect the
water inlet hose
to a separate tap
with a 3/4"
thread after havA
ing inserted the
small filter “A”
supplied with the
machine.
The other end of the inlet hose which connects to the machine can be
turned in any direction. Simply loosen the fitting, rotate the hose and
retighten the fitting, making sure there are no water leaks.
The inlet hose must not be lengthened. If it is too short and you do not
wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.
Water drainage
The end of the drain hose can be positioned
in three ways:
Hooked over the edge of a sink using the
plastic hose guide supplied with the
machine. In this case, make sure the end
cannot come unhooked when the machine
is emptying.
This could be done by tying it to the tap
with a piece of string or attaching it to the
wall.
In a sink drain pipe branch. This branch must be above the trap so that
the bend is at least 60 cm above the ground.
84
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising