Aeg-Electrolux | LTH57810 | User manual | Aeg-Electrolux LTH57810 User Manual

LAVATHERM 57810
Condenser dryer
User information
Dear Customer,
Please read this user information carefully and keep it to refer to later.
Please pass the user information on to any future owner of the appliance.
1
3
2
2
The following symbols are used in the text:
Safety instructions
Warning! Information that affects your personal safety.
Important! Information that prevents damage to the appliance.
Useful tips and hints
Environmental information
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Environmental tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Description of machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Operating screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Before the first drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Sorting and preparing laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Overview of programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching machine on / switching light on . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening loading door / filling laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTENSITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AUDIBLE SIGNAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIAL CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SENSITIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting time delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing laundry or loading laundry when necessary . . . . . . . . . . . . . . . . .
Drying cycle complete / removing laundry . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
12
12
12
12
12
13
13
13
13
14
14
14
14
Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning lint filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the door seal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Emptying the water reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning heat exchanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clean operating screen and housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
15
16
17
18
19
19
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting by yourself . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing bulb for interior light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Programming options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Consumption values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation and connection instructions. . . . . . . . . . . . . . . . .
24
Installation safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Removing transport safety packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Door reversal instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Special accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service and Spare Parts
4
29
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Operating Instructions
1 Safety
Prior to initial start up
• Note the ”Installation and connection instructions”
• Before first starting up, check the machine for any damage incurred
during transport. Never connect a damaged machine. If parts are
damaged, contact your supplier.
Intended use
• The dryer is intended for drying standard laundry in domestic environments.
• Conversions or modifications to the dryer are not permitted.
• The laundry must not contain flammable solvents (benzene,
alcohol, stain remover, etc.) . Risk of fire and/or explosion! Laundry
which has come into contact with such substances must be rinsed
thoroughly by hand before drying.
• When using dry-cleaning sets: Only use those products which are declared as suitable for the dryer by the manufacturer.
• Do not place items of laundry in the dryer which contain foam rubber
or materials similar to rubber. Risk of fire!
• Do not place heavily worn laundry items in the dryer. Risk of fire!
• Do not place laundry items with loose fillings (e.g. cushions) in the
dryer. Risk of fire!
• Parts with rigid components (e.g. door mats) may cover the air slots.
Risk of fire! Do not place such items in the dryer.
• Do not overfill the dryer. Risk of fire! Observe max. loading volume of
6 kg.
• Ensure that explosive objects (e.g. cigarette lighters, spray cans, etc.)
do not enter the dryer with the laundry. Risk of fire and/or explosion!
• Clean the micro-fine filter and fine strainer after each drying cycle.
• Do not use the machine if there are no lint filters or if these are damaged. Risk of fire!
• Clean the heat exchanger regularly.
• With stacked washer and dryer: Do not place objects on the dryer.
These may fall off during operation.
• The lampcover for the interior light must be screwed down tightly.
5
Child safety
• Keep packaging away from children. Risk of suffocation!
• Children can often not see the dangers associated with electrical appliances. Never leave unsupervised children near the dryer.
• Ensure that children and small animals cannot climb into the dryer’s
drum. Risk of death! Keep the dryer door shut whenever it is not being used.
General safety
• Only our qualified engineers may undertake repairs on the dryer.
• Never start up the dryer if the mains cable is damaged or if the operating screen, operating plate or base area are damaged so that the inside of the machine is open and accessible.
• Switch off the dryer before all cleaning, care or maintenance work.
Also disconnect the mains plug from the socket or – with permanent
connections – switch off the LS switch in the fuse box and/or remove
the fuse.
• Disconnect the machine from the power supply when it is not in use.
• When removing from the socket, never pull the mains plug by the cable, instead take a hold of the plug.
• Adapter plugs, couplings and extension cables must not be used. Risk
of fire from overheating!
• Do not spray down the dryer with jets of water. Risk of electric shock!
• Do not lean on the open door. The machine may tip over.
• Once the drying cycle has been interrupted, the laundry and drum
may be hot. Risk of burns! Take care when removing the laundry.
Disposal
2
6
Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at your local waste disposal facilities.
2
Old appliance
W
1
The symbol
on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
Warning! When your appliance has finished it's working life, remove
the plug from the mains socket. Cut off the cable and plug and dispose
of them.
Destroy the door lock. This prevents children from trapping themselves
inside and endangering their lives.
2 Environmental tips
• Your dryer will function most economically if you:
– always keep the ventilation slots on the base of the dryer unobstructed;
– use the loading volumes specified in the programme overview;
– ensure you have good ventilation in the installation room;
– clean the micro-fine filter and fine strainer after each drying cycle;
– spin the laundry well before drying. Example: Consumption data –
depending on spinning speed – for 6kg of laundry, dried using the
COTTONS STORAGE DRY programme.
Pre-draining
Revolutions per
minute
Drying cycle
Residual dampness
Energy
in kWh
in litres
as a %
800
4.2
70
3,84
1200
3.2
53
3,10
1400
3.0
50
3,00
1800
2.5
42
2,60
7
Description of machine
Display panel
Water reservoir
Fine strainer
(lint filter)
Lamp for interior
illumination
Large mesh filter
(lint filter)
Micro-fine filter
(lint filter)
Rating plate
Loading door
(reversible)
Base door
upstream of
heat exchanger
Screwed feet
(with height
adjustment)
Air slots
Operating screen
INTENSITY button
Multi-display
Display showing DELAY TIMER
button
level of dryness
Programme progress display
Block of buttons and displays
8
Programme selector
Maintenance displays
– HEAT EXCHANGER (clean!)
– EMPTY WATER (empty!)
– CLEAN FILTER (clean lint filter!)
Before the first drying cycle
In order to remove any residue which may have been produced during
production, wipe the dryer drum with a damp cloth or undertake a
brief drying cycle (30 MIN) with damp cloths.
Sorting and preparing laundry
Sorting laundry
• Sort by fabric type:
– Cotton/linen for programmes in COTTONS programme group.
– Mixtures and synthetics for programmes in EASY CARES programme group.
• Sorting by care label. The care labels mean:
n
m
l
k
Basic drying
in tumble
dryer possible
Drying
at normal
temperature
Drying
at reduced temperature
(press SPECIAL CARE
button!)
Drying
in tumble dryer
not possible
• Do not dry new, coloured textiles together with light-coloured laundry items. Textile colours may bleed.
• Do not dry tricot or knitted items with the EXTRA DRY programme.
Items may become stuck!
• Do not dry wool in the dryer. May become entangled! After air-drying, wool may be dried with the WOOL CARE programme.
Preparing laundry
• To avoid laundry becoming tangled: Close zips, button up coverings
and tie loose bands or ribbons (e.g. of aprons).
• Empty pockets. Remove metallic items (paperclips, safety pins etc).
• Turn items with double-layered fabrics inside out (e.g. with cottonlined anoraks, the cotton layer should be outermost). These fabrics
will then dry better.
9
Overview of programmes
max. loading volume
(weight when dry)
AUDIBLE SIGNAL
SPECIAL CARE1)
SENSITIVE 1)
INTENSITY
EXTRA DRY
6kg
•
•
•
•
Drying thick or multi-layered textiles, e.g. terry towelling items
mn
INTENSIVE
DRY
6kg
•
•
•
•
Drying thick textiles, e.g. terry
towelling items, towels.
mn
STORAGE
DRY
6kg
•
•
•
•
Drying textiles of even thicknesses, e.g. terry towelling items, knitted items, towels.
mn
DAMP
6kg
•
•
•
•
For thin textiles which are still to
be ironed, e.g. knitted items, cotton shirts.
mn
HAND
IRON
6kg
•
•
•
•
For normal thickness cotton or
linen laundry, e.g. bedding, table
linen.
mn
MACHINE
IRON
6kg
•
•
•
•
For cotton or linen laundry which
are still to be put through a machine, e.g. bedding, table linen.
mn
EXTRA DRY
3kg
•
•
•
•
Drying thick or multi-layered textiles, e.g. pullovers, bedding, table
linen.
m l2)
n
m l2)
n
m l2)
n
COTTONS
Programme
EASY CARES
Additional
functions
Application/properties
STORAGE
DRY
3kg
•
•
•
•
For thin textiles which are not
ironed, e.g. easy care shirts, table
linen, baby’s clothes, socks, underwear.
DAMP
3kg
•
•
•
•
For thin textiles which are still to
be ironed, e.g. knitted items, cotton shirts.
1) SPECIAL CARE and SENSITIVE cannot both be selected at the same time.
2) Press the SPECIAL CARE button!
10
Care
symbols
max. loading volume
(weight when dry)
AUDIBLE SIGNAL
SPECIAL CARE1)
SENSITIVE 1)
INTENSITY
Additional
functions
30 MIN
1kg
•
•
-
-
For drying individual items of laundry
or for small volumes of less than 1kg.
6kg
•
•
•
•
Special programme for leisure clothing, such as jeans, sweat-shirts, etc.,
of different material thicknesses (e.g.
at the cuffs and seams).
mn
LEISURE
m l2)
n
-
Special programme with anti-crease
feature for easy care textiles such
shirts and blouses; for minimum ironing effort. The result depends on the
type and quality of textiles. (The loading volume corresponds to approx. 5
to 7 shirts.)
Recommendation: Place textiles in the
dryer straight after spinning. Once
dried, immediately remove textiles
and place on clothes hanger.
-
Special programme for briefly treating
woollens with warm air after they
have been dried naturally, worn or
stored for long periods. Wool fibres
are aligned and the wool becomes
soft and snugly.
Recommendation: Remove textiles
immediately after drying.
-
Special programme, lasting around 35
minutes, for refreshing or gently
cleaning textiles with commercially
available dry cleaning sets.
(Only use those products which are
declared as suitable for the drier by
the manufacturer; please observe the
manufacturer’s instructions for use.)
Programme
EASY IRON
WOOL CARE
REFRESH
1kg
1kg
1kg
•
•
•
•
•
•
-
-
-
Application/properties
Care
symbols
m l2)
n
1) SPECIAL CARE and SENSITIVE cannot both be selected at the same time.
2) Press the SPECIAL CARE button!
11
Drying
Switching machine on / switching light on
Turn the programme selector to any programme or turn it to LIGHT. The
machine has been switched on. When the door is opened, the drum is
illuminated.
Opening loading door / filling laundry
1. Open loading door:
– Either press against the loading door push point
– or if the machine is switched on: Press the DOOR button.
2. Load your laundry (do not force it in/over load the machine).
1
Caution! Be careful not to trap laundry in between the loading door
and rubber seal.
3. Close loading door securely. Lock must audibly lock.
Selecting the programme
Use the programme selector to set
the programme you require.
The probable programme run time
is displayed (in minutes) on the
multi-display.
Selecting additional functions
INTENSITY
Precise setting of humidity content
of laundry. Laundry becomes dryer
from + to +++.
1. Press the INTENSITY button as
many times as necessary until the
small light at the level of residual
dampness required is illuminated.
12
If required, press the AUDIBLE
SIGNAL, SPECIAL CARE or SENSITIVE buttons.
AUDIBLE SIGNAL
When the drying cycle has finished, an intermittent audible signal will
sound.
SPECIAL CARE
For especially gentle drying of sensitive fabrics with the l care label
and for temperature-sensitive textiles (e.g. acrylic, viscose). Programme
is executed with reduced heat.
SPECIAL CARE is only suitable for use with loads of up to 3kg!
SENSITIVE
3
For gentle drying of frequently-worn textiles. Programme starts on full
heat setting, which is then reduced towards the end of the programme
to ensure gentle care of laundry.
SPECIAL CARE and SENSITIVE cannot be selected together.
Setting time delay
3
3
3
With the DELAY TIMER button, you can delay the start of a programme
by between 30 minutes (30' and a maximum of 23 hours (23h).
1. Select the programme
2. Press the DELAY TIMER button as many times as necessary until the required start delay appears on the multi display, e.g. 12h if the programme is to be started in 12 hours. The DELAY TIMER display is
illuminated.
If 23h is displayed and you press the button again, the time delay will
be cancelled. The display will show 0' and then the duration of the selected programme.
3. To activate the delay timer, press the START/PAUSE button. The amount
of time remaining until the programme is set to start is continuously
displayed (e.g. 12h, 11h, 10h, … 30' etc).
Until the start of the programme the drum is moved at longish intervals
to loosen the laundry.
13
Starting the programme
Press the START/PAUSE button. The programme is started.
The programme progress display and the display showing the level of
dryness show drying progress.
Changing programme
To change a programme which has been selected by mistake once the
programme has started, first turn the programme selector to OFF and
then reset the programme.
3
The programme can no longer be changed directly once the programme
has started. If nevertheless there is an attempt to change the programme on the programme knob, the programme progress display and
the maintenance indicators flash. If an option button (excluding the
AUDIBLE SIGNAL button) is pressed, Err appears in the multidisplay.
The drying programme is not however affected by this (laundry protection).
Removing laundry or loading laundry when necessary
1. Open loading door
1
Warning! Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close the door securely. Lock must audibly lock.
4. Press the START/PAUSE button to continue the drying cycle.
Drying cycle complete / removing laundry
3
14
Once the drying cycle is complete, the END and CREASE GUARD displays light up. If the AUDIBLE SIGNAL button has been pressed, an audible signal sounds intermittently.
The drying cycle is automatically followed by a crease guard phase
which lasts around 30 minutes. The drum rotates in intervals during
this phase. The laundry thereby remains relaxed and free of creases. The
laundry can be removed at any time during the crease guard phase.
(The laundry should be taken out towards the end of the crease guard
phase at the latest to prevent creases from forming.)
1. Open loading door
2. Before removing the laundry, remove lint from the micro-fine filter. It is
best to use a damp hand for this purpose (refer to “Cleaning and maintenance” section).
3. Remove laundry.
4. Turn the programme selector to OFF.
Important! After each drying cycle
– clean the micro-fine filter and fine strainer,
– drain the condensate tank
(refer to the “Cleaning and maintenance” section).
5. Close loading door.
Cleaning and maintenance
Cleaning lint filter
1
To ensure that the dryer works efficiently, the lint filters (micro-fine filter and fine strainer) must be cleaned after every drying cycle.
Caution! Never operate the dryer without fluff filters or with damaged
or blocked fluff filters.
1. Open door
2. Use a damp hand to clean the micro-fine filter, which is built into
the lower part of the loading aperture.
3. Push down unlock button on large
mesh filter.
Large mesh filter elevates.
15
4. Take out fine strainer.
5. Remove fluff from fine strainer. It
is best to use a damp hand for this
purpose.
3
Clean the entire filter area
The strainer area does not have to be cleaned after every drying cycle,
but should be checked regularly and cleaned of fluff if necessary.
6. To do this, grip the top of the large
mesh filter and pull it forwards until it comes loose from the two
brackets.
7. Remove fluff from the entire filter
area. It is best to use a vacuum
cleaner for this purpose.
8. Press both lugs of the large mesh
filter into the brackets on the loading door until they snap into place.
9. Re-insert fine strainer.
10. Press against the large mesh filter
until it locks into the interlock.
3
If the fine strainer is not fitted, the
large mesh filter will not snap into
place and the door cannot be
closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cycle has finished.
16
Emptying the water reservoir
1
Empty water reservoir after every drying cycle.
If the water reservoir is full, an active programme will be interrupted
automatically and the EMPTY WATER display will light up. In order to
continue the programme, the water reservoir must be emptied.
Warning! The condensed water is not suitable for drinking or for preparing foodstuffs.
1. Take out drawer containing water
reservoir completely (1) and pull up
the water reservoir’s drainage pipe
as far as it will go (2).
3
3
2. Pour condensed water out into a
sink or other suitable container.
3. Slide outlet connections in and refit water reservoir.
If the programme has been interrupted as a result of the water reservoir being full:
Press the START/PAUSE button to
continue the drying cycle.
The water reservoir has a volume of approx. 4 litres. This is sufficient for
around 6kg of laundry which has previously been spun at 800 revolutions/minute.
The condensed water can be used as distilled water, e.g. for steam ironing. However first filter it (e.g. with a coffee filter) to remove any residue and small pieces of fluff.
17
Cleaning heat exchanger
1
If the HEAT EXCHANGER display is illuminated, the heat exchanger
needs to be cleaned.
Caution! Operating when the heat exchanger is clogged with lint can
damage the dryer. This also increases energy consumption.
1. Open loading door
2. Open base door. To do this, press
the release button located beneath
the loading aperture and open the
base door to the left.
3. Remove lint from the inside of the
door and the heat exchange chamber. Wipe the door seal with a
damp cloth.
4. Turn both lock washers inwards.
5. Use the handle to pull the heat exchanger out of the base and carry
it horizontally to prevent any remaining water from spilling.
6. To empty the heat exchanger, hold
vertically over a washing-up bowl.
1
Caution! Do not use sharp objects
to clean the heat exchanger. You
could damage it an cause leaks.
7. Clean heat exchanger.
It is best to use a brush or to rinse thoroughly with a shower head.
8. Replace heat exchanger and lock into place (turn both lock washers
outwards until they snap into place).
9. Close base door.
3
1
18
The dryer will not operate if the HEAT EXCHANGER indicator is still lit.
Caution! Never operate the dryer without the heat exchanger.
Cleaning the drum
1
3
Caution! Do not use abrasives or steel wool to clean the drum.
Lime in the water or cleaning agents may form a barely visible lining on
the inside of the drum. The degree to which the laundry has been dried
is then no longer detected reliably. The laundry is damper than expected when removed from the dryer.
Use a damp cloth, which has been soaked in water and a little vinegar,
to wipe the inside of the drum and drum ribs.
Clean operating screen and housing
1
Caution! Do not use furniture cleaners or aggressive cleaning agents to
clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if …
Troubleshooting by yourself
If, during operation, the error code (E plus number or letter) appears on
the multi-display: Switch the machine off and on again. Reset programme. Press the START/PAUSE button
If the error is still displayed, please inform your local Service Force Centre and quote the error code.
Problem
Possible cause
Remedy
Mains plug is not plugged in Plug in at mains socket. Check
or fuse is not working cor- fuse in fuse box (domestic inrectly.
stallation).
Dryer does not work.
Loading door is open.
Close loading door.
Have you pressed the START/ Press the START/PAUSE button
PAUSE button?
again.
19
Problem
Possible cause
Remedy
Select a different programme
the next time you dry (see
Wrong programme selected.
“Overview of programmes”
section).
Lint filter clogged.
Clean lint filter.
Heat exchanger clogged
with lint.
Clean heat exchanger.
Observe recommended loadDrying results unsatis- Overloading of laundry.
ing volumes.
factory.
Ventilation slots in base area Uncover ventilation slots in
covered up.
base area.
Residue on inside surface of Clean inside surface of drum
drum or drum ribs.
and drum ribs.
Make an adjustment using the
INTENSITY function (see chapter ”Drying, Selecting additional functions”).
Mains plug disconnected.
Loading door does not
open with DOOR but- Programme selector in OFF
ton.
position.
Plug in at mains socket.
Set programme. Loading door
can be opened at any time by
exerting pressure on the door.
Fine strainer not in place
Install fine strainer and/or
Loading door does not
and/or large mesh filter not snap large mesh filter into
close.
locked in place.
place.
When a button is
pressed, Err appears
in the multi-display.
Drum light does not
work.
20
Washing protection. After
the start of the programme, Turn the programme knob to
the option can no longer be OFF. Set the programme again.
set.
Programme selector in OFF
position.
Turn programme selector to
LIGHT or to any programme.
Defective light bulb.
Replace light bulb (see next
section).
PROGRAMME TIME
display changes erratically or stays unchanged for a long
time.
Programme time is corrected automatically depending
Automatic process; this is not
on type and volume of
a machine fault.
laundry and level of dampness.
Programme inactive,
EMPTY WATER display
illuminated.
Condensate tank is full.
Empty condensate tank, then
start programme with START/
PAUSE button.
Problem
Drying cycle ends
shortly after programme starts. END
display illuminated.
Drying cycle lasts an
unusually long time.
Note:
After around 5 hours
the drying cycle ends
automatically (see
„Drying cycle complete“).
Possible cause
Remedy
Select time programme or
Not enough washing loadhigher drying level (e.g. INTENed or washing loaded is too
SIVE DRY instead of STORAGE
dry for selected programme.
DRY).
Lint filter clogged.
Clean lint filter.
Heat exchanger clogged
with lint.
Clean heat exchanger.
SPECIAL CARE button
SPECIAL CARE is only suitable
pressed and load volume too for use with loads of up to
big.
3kg!
Load volume too big.
Reduce load volume.
Laundry insufficiently spun.
Laundry must be adequately
spun.
Changing bulb for interior light
1
1
Only use a special bulb which is designed specially for dryers. The special bulb is available from the local Service Force Centre.
Warning! Do not use standard bulbs! These develop too much heat and
may damage the machine!
Warning! Before replacing the bulb, disconnect the mains plug; with a
permanent connection: fully remove the fuse.
1. Unscrew the lampcover (this can be found directly behind the loading
aperture, at the top; refer to “Description of machine” section.)
2. Replace defective bulb.
3. Replace the lampcover.
1
Warning! For reasons associated with safety, the lampcover must be
screwed down tightly. If this is not done, the dryer must not be operated.
21
Programming options
Objective
Implementation
1. Turn the programme selector to any programme.
Permanently programme 2. Press the AUDIBLE SIGNAL button and hold down for
in the audible signal
approx. 5 seconds.
which reminds you that
A brief signal sounds several times. The AUDIBLE SIGNAL
the programme is comdisplay flashes several times.
plete.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
22
Adjust “level of dryness”
detection:
If the laundry is slightly
drier or slightly damper
at the end of the programme than with the
standard setting.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the
same time and hold down for approx. 5 seconds.
The current setting appears on the multi-display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting required
appears on the multi-display.
4. Turn the programme selector to OFF.
The setting is permanently programmed.
To deactivate the EMPTY
WATER display when using an external drain for
the condensed water.
1. Turn the programme selector to any programme.
2. Press the DOOR and SPECIAL CARE buttons at the same
time and hold down for approx. 5 seconds. The multidisplay briefly displays ”0”
The EMPTY WATER display is permanently deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays ”1” (rather than
”0”).
Technical data
5
This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Height x width x depth
85 x 60 x 60 cm
Depth with loading door open
109 cm
Height can be adjusted by
1.5 cm
Weight when empty
approx. 42kg
Loading volume (depends on programme) 1)
max. 6kg
Energy consumption in accordance with IEC 1121 s. e.
(6kg of cotton, pre-drained at 800 rpm,
3,84kWh
COTTONS STORAGE DRY programme)
Use
Domestic
permissible ambient temperature
+ 5°C to + 35°C
1) Different loading volume data may be needed in some countries as a result of different measuring methods.
Consumption values
The consumption values have been established under standard conditions. They may deviate when the machine is operated in domestic circumstances.
Programme
COTTONS STORAGE DRY 1)
COTTONS HAND IRON
1)
EASY CARES STORAGE DRY
2)
Loading volume
in kg
Energy
consumption
in kWh
6
3,84
6
3,10
3
1,55
1) pre-drained at 800 rpm
2) pre-drained at 1000 rpm
23
Installation and connection instructions
1 Installation safety instructions
• Before first starting up, all parts of the transport safety devices must
be removed. The machine may otherwise be damaged.
• Before using for the first time, ensure that the nominal voltage and
type of current specified on the machine rating plate match the
nominal voltage and type of current at the installation site. The electrical fuses required can also be found on the rating plate.
• Always connect the plug into a protection contact socket which has
been installed as specified.
• With permanent connections: A permanent connection may only be
established by an authorised specialist electrician.
• Do not install machine in rooms at risk of frost.
• Ensure that the door of the machine cannot be blocked by interior
doors of the house or the doors of other appliances.
• Do not install on deep pile carpets. Air circulation will be hindered at
the ventilation slots.
• Ensure that the machine is not placed on its mains cable.
• The tumble dryer must be level when installed.
• Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
Removing transport safety packaging
1
Caution! Before first using all
parts of the transport packaging
must be removed.
1. Open loading door
2. Pull off adhesive strips from inside
machine on top of drum.
24
3. Remove foil hose and polystyrene
padding from the machine.
Electrical connection
1
1
Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
WARNING – THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should these safety measures
not be observed.
Before switching on, make sure the electricity supply voltage is the
same as that indicated on the appliance rating plate.
The appliance is supplied with a 13 amp plug fitted. In the event of
having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1363) fuse must be used.
Should the plug need to be replaced
for any reason, proceed as described
below.
The wires in the mains lead are
coloured in accordance with the
following code:
Green and Yellow:
Earth
Blue:
Neutral
Brown:
Live
• The wire coloured green and yellow
must be connected to the terminal
marked with the letter “E“ or by the
earth symbol E or coloured green and yellow.
• The wire coloured blue must be connected to the terminal “N“ or
coloured black.
• The wire coloured brown must be connected to the terminal marked
“L“ or coloured red.
• Upon completion there must be no cut, or stray strands of wire
present and the cord clamp must be secure over the outer sheath.
WARNING! A cut off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut off plug is disposed of safely.
25
Permanent Connection
1
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any
point.
This appliance complies with the requirements laid out in the EEC Directive 76/899.
Voltage 240 V AC: Fuse rating 13amps
See rating plate for further information.
This appliance meets VDE requirements.
Particular regulations of local electricity authorities must be observed.
This appliance conforms to EEC Directive No. 82/499/EWG on radio interference.
WARNING! Repairs to electrical appliances must only be carried out by
trained personnel. Improper repairs may lead to serious risks for the user.
Door reversal instructions
1
26
Warning! The door may only be reversed by a specialist.
If necessary, please contact your local Service Force Centre.
Warning! Before reversing the door, disconnect the mains plug; with a
permanent connection: remove the fuse.
1. Open door.
2. Unscrew hinge A from the front of
the machine and take off the loading door.
3. Carefully pry off cover plates B and
C. To do this, insert a thin screwdriver into the slots as shown in the
illustration, press downwards
slightly and pry out the cover
plates.
4. Unfasten locking block D from the
snap-on fixture, take out and reinsert on the other side having rotated the block through 180°.
5. Unscrew hinge A from the loading
door, rotate through 180°, reinsert
on the opposite side and screw
down.
6. Reinsert cover plates B and C on the opposite site having first rotated
them through 180°.
7. Unscrew cover plates E from the
front of the machine, rotate
through 180°, screw on the
opposite side.
8. Unscrew door lock F, push down
slightly and remove from the front
of the machine.
9. Disconnect cable connector from
door lock F.
10. Press snap-in button G in and
down, press cover down slightly
and remove from front of the machine.
11. Disconnect cable connector from
cover G.
12. Change door lock F over to the opposite side, insert the cable connector and screw down the door
interlock.
13. On the other side, insert the cable connector in cover G, insert cover
and allow snap-in button to lock into place.
27
14. Insert door and hinges into recesses on the front of the machine and
screw down.
15. Once the door has been reversed, check the function of the DOOR button.
Note regarding contact protection: The machine is only secure for
operations again once all plastic parts have been inserted.
Special accessories
The following special accessories are available from your Service Force
Centre or your specialist dealer:
Intermediate installation kits for stacked washer and
dryer:
These intermediate installation kits can be used to arrange the dryer
and an automatic AEG-Electrolux washing machine (60cm wide, front
loading) as a space-saving washer/dryer stack. The automatic washing
machine is at the bottom and the dryer is at the top.
Two versions can be supplied:
– without stacker plate
916.018 902
– with extractable stacker plate
916.018 903
Installation kit for external condensate drain
Installation kit (125 122 510) for direct draining of condensate into a
basin, siphon, gully, etc. The condensate tank then no longer has to be
drained, it must however remain in its intended position in the machine. Refer to the “Programme options” section for how to deactivate
the EMPTY WATER display.
Max. displacement height: 1m from the base of the dryer; max. displacement length: 3m
28
Warranty conditions
Great Britain
Standard guarantee conditions
We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or
any part thereof is proved to be defective by reason only of faulty workmanship or materials, we
will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage
on condition that:
• The appliance has been correctly installed and used only on the electricity or gas supply stated
on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the
manufacturer's operating and maintenance instructions.
• The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any
person not authorised by us.
• All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company's property.
• This guarantee is in addition to your statutory and other legal rights.
• Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available
outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject
to rental agreements.
• Products of AEG manufacture which are not marketed by AEG.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to
your new home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in
the new country of use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within the European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.
• The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your
move and able to look after you and your appliances.
France
Germany
Italy
Sweden
UK
Senlis
Nürnberg
Pordenone
Stockholm
Slough
+33 (0) 3 44 62 29 29
+49 (0) 800 234 7378
+39 (0) 800 117511
+46 (0) 8 672 5360
+44 (0) 1753 219899
29
30
Service and Spare Parts
If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning:
0870 5 929 929
Your telephone call will be automatically routed to the Service Force
Centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the website at
www. serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details
under the heading „What to do if...“
When you contact the Service Force Centre you will need to give the
following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model and serial number of the appliance (found on the rating
plate)
5. The purchase date.
Please note that a valid purchase receipt or guarantee documentation is
required for in-guarantee service
calls.
Customer Care
For general enquiries concerning
your AEG-Electrolux appliance, or
for further information on AEGElectrolux products please contact
our Customer Care Department by
letter or telephone at the address below or visit our website at
www.aeg.co.uk.
Customer Care Department For Customer Service in the Republic
of Ireland please contact us at the adAEG-Electrolux
dress below:
Domestic Appliances
AEG/ Electrolux Group (Ire) Ltd
55-77 High Street
Long Mile Road/ Dublin 12
Slough
Republic of Ireland
Berkshire, SL1 1DZ
Tel: +353 (0) 1 4090754
Tel: 08705 350350 (*)
Email: service.eid@electrolux.ie
(*) Calls may be recorded for training purposes
31
From the Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg-electrolux.de
© Copyright by AEG
822 944 811-01-220605-01
Subject to change without notice
Download PDF

advertising