Westinghouse SB916WK, SB916SK User manual

Westinghouse SB916WK, SB916SK User manual
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 1
user manual
Dishwasher
SB916
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 2
2 The Thoughtful Design Innovator
The Thoughtful Design Innovator.
Do you remember the last time you opened a gift that made you say
“Oh! How did you know? That’s exactly what I wanted!” That’s the kind of
feeling that the designers at Electrolux seek to evoke in everyone who
chooses or uses one of our products. We devote time, knowledge, and a
great deal of thought to anticipating and creating the kind of appliances that
our customers really need and want.
This kind of thoughtful care means innovating with insight. Not design for
design’s sake, but design for the user’s sake. For us, thoughtful design means
making appliances easier to use and tasks more enjoyable to perform, freeing
our customers to experience that ultimate 21st century luxury, ease of mind.
Our aim is to make this ease of mind more available to more people in more
parts of their everyday lives, all over the world. So when we say we’re thinking
of you, you know we mean just that.
Electrolux. Thinking of you.
Westinghouse. We are part of the Electrolux family.
Share more of our thinking at www.electrolux.com
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 3
contents 3
Contents
Safety information
4
Product description
6
Control panel
7
First use
9
Daily use
10
Washing programmes
20
Care and cleaning
21
Something not working
23
Technical data
26
Hints for test institutes
28
Installation
29
Building-in
31
Environment concerns
33
Warranty
34
The following symbols are used in this manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
General information and tips
Environmental information
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 4
4 safety information
Safety information
●
In the interest of your safety and to
ensure correct use, before
installing and first using the
appliance, read this user manual
carefully, including its hints and
warnings. To avoid unnecessary
mistakes and accidents, it is
important to ensure that all people
using the appliance are thoroughly
familiar with its operation and
safety features. Save these
instructions and make sure that
they remain with the appliance if it
is moved or sold, so that everyone
using it through its life will be
properly informed on appliance use
and safety.
Correct use
● This dishwasher is only intended
for washing household utensils
suitable for machine washing.
● Do not put any solvents in the
dishwasher. This could cause an
explosion.
● Knives and other items with sharp
points must be loaded in the
cutlery basket with their points
down or placed in a horizontal
position in the upper basket.
● Only use products (detergents,
cleaners, rinse aid etc) suitable for
dishwashers.
● Avoid opening the door whilst the
appliance is in operation, hot
steam may escape.
● Do not take any dishes out of the
dishwasher before the end of the
dishwashing cycle.
●
If the supply cord is damaged, it
must be replaced by the
manufacturer or its service agent
or a similarly qualified person in
order to avoid a hazard.
This product should be serviced
only by an authorised service
engineer, and only genuine spare
parts should be used.
General safety
Dishwasher detergents are very
alkaline and extremely dangerous
if swallowed. Be careful to: keep
them away from your eyes and
skin, keep children from the
dishwasher when the door is
opened, and only put detergent in
the dispenser when you are ready
to wash. Otherwise, check that the
detergent receptacle in the
dispenser is empty after the
completion of the wash cycle.
● The water in your dishwasher is
not for drinking. Detergent residues
may still be present in your
machine.
● Ensure that the door of the
dishwasher is always closed when
it is not being loaded or unloaded.
In this way you will avoid anybody
tripping over the open door and
hurting themselves.
● Do not sit or stand on the open
door.
●
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 5
safety information 5
Child safety
● This appliance is not intended for
use by young children or infirm
persons unless they have been
adequately supervised by a
responsible person to ensure that
they can use the appliance safely.
● Young children should be
supervised to ensure that they do
not play with the appliance.
● Keep all packaging well away from
children. There is risk of
suffocation.
● Keep all detergents in a safe place
out of children’s reach.
● Keep children well away from the
dishwasher when the door is open.
Installation
● Check your dishwasher for any
transport damage. Never connect
a damaged machine. If your
dishwasher is damaged contact
your supplier.
● All packaging must be removed
before use.
● Any electrical and plumbing work
required to install this appliance
must be carried out by a qualified
and competent person.
● For safety reasons it is dangerous
to alter the specifications or
attempt to modify this product in
any way.
● Never use the dishwasher if the
electrical supply cable and water
hoses are damaged; or if the
control panel, work top or plinth
area are damaged such that the
inside of the appliance is freely
accessible. Contact your local
Customer Care Centre, in order to
avoid hazard.
● All sides of the dishwasher must
never be drilled to prevent damage
to hydraulic and electric
components.
For electrical and water connection
carefully follow the instructions
given in specific paragraphs.
117994720 15032007.qxp
6
3/16/2007
product description
Product description
1 Upper basket
2 Pressure balancing device
3 Detergent dispenser
4 Rinse aid dispenser
5 Rating plate
6 Filters
7 Lower spray arm
8 Upper spray arm
11:52 AM
Pagina 6
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 7
control panel 7
Control panel
1 POWER light
2 POWER button
The digital display indicates:
3 PROGRAM selection button
-
4 DELAY button
-
5 START / Button LOCK
6 START light
-
7 Indicator lights
-
8 DISPLAY
9 Program lights
the approximate remaining time of
the running program,
the end of a washing program (a
zero will appear in the digital
display),
the countdown of the delay start,
fault codes concerning
malfunction of the dishwasher.
activation of button lock (CL).
117994720 15032007.qxp
8
3/16/2007
11:52 AM
Pagina 8
control panel
Button Lock option
Close the door.
Press the POWER button.
Press the program Button to select a
program.
Press the Delay button if needed.
Press the START button to start the
cycle.
To activate the Button LOCK function,
press the START button for 5
seconds, the button lock light blinks
for 15 seconds, then when it is
permanently on, it indicates the key
lock is active. The button lock key
stops anyone from changing the
selected program.
If any button is pressed, an audible
signal indicates that the key lock
funtion is active.
To cancel the selected program and
select a new one, reset the
dishwasher by:
- pressing the START button for 5
seconds (the keylock light blinks for
15 seconds)
- press and hold simultaneously
Program and DELAY START
buttons (CANCEL) until the program
light indicator switches off, then the
program has been cancelled and
the key lock deactivated and a new
program can be selected.
The button LOCK option is
automatically deactivated at the end
of the selected program by switching
OFF the dishwasher or opening and
closing the door.
Indicator lights
Button Lock
Flashes for 15 seconds when the
START/Button LOCK is pressed for 5 seconds.
Illuminates when the function Button lock is
activated.
Rinse aid
Illuminates when the rinse aid has run out.
Setting mode
The rinse aid indicator light is
never illuminated while a washing
program is running even if filling
with rinse aid is necessary.
To cancel a set program or a
program in progress
Simultaneously press and hold the
two program buttons positioned over
the word Cancel, until only the
POWER light is on. The program has
been cancelled and the machine is
now in setting mode.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 9
first use 9
First use
Before using your dishwasher for the
first time:
● Ensure that the electrical and
water connections comply with the
installation instructions
● Remove all packaging from inside
the appliance
● Fill the rinse aid dispenser
The dispenser holds about 110 ml of
rinse aid, which is sufficient for
between 16 and 40 dishwashing
cycles, depending upon the dosage
setting. According to the finish and
drying results obtained, adjust the
dose of rinse aid by means of the 6
position selector (position 1 minimum
dosage, position 6 maximum dosage).
Filling with rinse aid
Rinse aid ensures thorough rinsing,
and spot and streak free drying.
Rinse aid is automatically added
during the last rinse.
1. Open the container by pressing
the release button (A).
2. Add the rinse aid in the container.
The maximum level for filling is
indicated by "max".
The dose is factory set in position 4.
Increase the dose if there are drops
of water or lime spots on the dishes
after washing.
Reduce it if there are sticky whitish
streaks on the dishes or a bluish film
on glassware or knife blades.
3. Ensure that the lid is closed after
every refill.
Clean up any rinse aid spilt during
filling with an absorbent cloth to
avoid excess foaming during the
next wash.
Only use branded rinse aid for
dishwashers.
Never fill the rinse aid dispenser
with any other substances (e.g.
dishwasher cleaning agent, liquid
detergent). This may damage the
appliance.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 10
10 daily use
Daily use
●
Check if it’s necessary to refill with
rinse aid
●
Load cutlery and dishes into the
dishwasher.
●
Fill with dishwasher detergent .
●
Select a wash program suitable for
the cutlery and dishes.
●
Start the wash program.
Loading cutlery and dishes
Sponges, household cloths and any
object that can absorb water must not
be washed in the dishwasher.
●
Before loading the dishes, you
should:
- Remove all left over food and
debris.
- Soften remnants of burnt food in
pans
●
When loading the dishes and
cutlery, please note:
- Dishes and cutlery must not
impede the rotation of the spray
arms .
- Load hollow items such as cups,
glasses, pans, etc. with the
opening downwards so that water
cannot collect in the container or
a deep base.
- Dishes and items of cutlery must
not lie inside one another, or
cover each other.
- To avoid damage to glasses, they
must not touch.
- Lay small objects in the cutlery
basket.
●
Plastic items and pans with non
stick coatings have a tendency to
retain water drops; these items will
not dry as well as porcelain and
steel items.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 11
daily use 11
For washing in the dishwasher the following cutlery and dishes
are not suitable:
- Cutlery with wooden, horn, china or mother-ofpearls handles.
- Plastic items that are not heat resistant.
- Older cutlery with glued parts that are not
temperature resistant.
- Bonded cutlery items or dishes.
- Pewter or copper items.
- Lead crystal glass.
- Steel items prone to rusting.
- Wooden platters.
- Items made from synthetics fibres.
are of limited suitability:
- Only wash stoneware in the dishwasher if it is
specially marked as being dishwasher-safe by the
manufacturer.
- Glazed patterns may fade if machine washed
frequently.
- Silver and aluminium parts have a tendency to
discolour during washing: Residues, e.g. egg
white, egg yolk and mustard often cause
discolouring and staining on silver. Therefore
always clean left-overs from silver immediately, if it
is not to be washed straight after use.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 12
12 daily use
Open the door and slide out the
baskets to load the dishes.
The lower basket
The lower basket is designed to take
saucepans, lids, plates, salad bowls,
cutlery etc.
Serving dishes and large lids should
be arranged around the edge of the
basket, ensuring that the spray arms
can turn freely.
The rows of prongs on the lower
basket can be easily lowered to allow
you to load pots, pans and bowls.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 13
daily use 13
The cutlery basket
Long bladed knives stored in an
upright position are a potential
hazard.
Long and/or sharp items of cutlery
such as carving knives must be
positioned horizontally in the upper
basket.
Take care when loading or
unloading sharp items such as
knives.
Forks and spoons should be placed in
the removable cutlery basket with the
handles facing downwards and the
knives with their handles facing
upwards .
If the handles protrude from the
bottom of the basket, obstructing the
lower spray arm, load the cutlery with
the handles facing upwards.
Mix spoons with other cutlery to
prevent them from sticking together.
For best results we recommend you
use the cutlery grids.
If the size and dimensions of the
cutlery do not allow the use of the
grids, they can be easily hidden or
removed.
117994720 15032007.qxp
3/16/2007
11:52 AM
14 daily use
The upper basket
The upper basket is designed for
plates (dessert plates, saucers, dinner
plates of up to 24 cm in diameter),
salad bowls, cups and glasses.
Arrange items on and underneath the
cup racks so that water can reach all
surfaces.
Glasses with long stems can be
placed upside down in the cup racks.
For taller items, the cup racks can be
folded upwards.
Light items (plastic bowls etc.) must
be loaded in the upper basket and
arranged so they do not move.
Before closing the door, ensure that
the spray arms can rotate freely.
Pagina 14
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 15
daily use 15
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket after moving
the upper basket to the higher position.
Maximum height of the dishes in the lower basket
upper basket lower basket
With upper basket raised
20 cm
31 cm
With upper basket lowered
24 cm
27 cm
To move to the higher position
proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards
until the mechanism is engaged
and the basket is stable.
Never lift or lower the basket on
one side only
When the upper basket is raised
you will not be able to use the cup
racks.
After loading your machine always
close the door, as an open door
can be a hazard.
To lower the basket to the original
position proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards
and then allow the mechanism to
drop back down slowly, keeping
hold of it.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 16
16 daily use
Use of detergent
20 = approximately 20 g of
detergent
30 = approximately 30 g of
detergent
Only use detergents specifically
designed for use in dishwashers.
Please observe the manufacturer’s
dosing and storage recommendations
as stated on the detergent packaging.
3. All programmes with prewash need
an additional detergent dose (5/10
g) that must be placed in the
prewash detergent chamber (2).
This detergent will take effect
during the prewash phase.
When using detergent tablets;
place the tablet in compartment (1)
Using no more than the correct
amount of detergent contributes to
reducing pollution.
Fill with detergent
1. Open the lid.
4. Close the lid and press until it
locks in place.
2. Fill the detergent dispenser (1)
with detergent. The marking
indicates the dosing levels:
1
2
Detergent tablets
Detergent tablets from different
manufactures dissolve at different
rates. For this reason, some detergent
tablets do not attain their full cleaning
power during short washing
programmes. Therefore, please use
long washing programmes when
using detergent tablets, to ensure the
complete removal of detergent
residuals.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 17
daily use 17
Use of Tablets
These products are detergents with a
combined cleaning, rinsing and salt
functions. They can also contain
different agents depending on the
tablets you choose («3 in 1», «4 in 1»,
«5 in 1» etc...).
1. Check whether these detergents
are suitable for your water
hardness. Follow the
manufacturers instructions.
The refilling of the rinse aid dispenser
is no longer necessary. In this case
the rinse aid indicator light will always
remain illuminated when the machine
is switched on.
2. Before starting the washing
programme put the multi functions
tablet in the detergent dispenser.
If the drying results are not
satisfactory we suggest that you:
1. Fill up the rinse aid dispenser with
rinse aid.
2. Set the rinse aid dosage to
position 2.
If you decide to turn back to the
use of standard detergent system
we advise that you:
1. Fill up the rinse aid dispenser
again.
2. Adjust the rinse aid dosage.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 18
18 daily use
Select and start a washing
programme
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Close the dishwasher’s door.
4. Press the POWER button. The
POWER light is on (setting mode).
5. Press the PROGRAM button
repeatedly to select a washing
program (see "Washing
programmes" chart): the
corresponding light illuminates and
the diplay shows the duration of
the selected programme.
6. Set, if required, the "DELAY"
function
After having selected the washing
program, press the DELAY button
until the flashing number of hours
for the DELAY will appear in the
digital display. You can choose
from 1 to 19 hours of delay.
During the setting of the program the
START light flashes:
7. Press the START button to start
the programme or the countdown.
The START light remains
illuminated during the performance
of the program.
The programme will start
automatically.
With DELAY fuction activated:
● The countdown starts
automatically. The number in the
display is no longer flashing but
fixed with static light.
● The countdown will decrease with
steps of 1 hour.
● The opening of the door will not
modify or interrupt the countdown.
● Once the delay start has elapsed
the programme will start
automatically.
If desired, activate the Button LOCK
function.
Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing program in
progress:
● Open the dishwasher door; the
program will stop. Close the door;
the program will start from the
point at which it was interrupted.
●
Press the POWER button, all lights
will turn off. Press the POWER
button again; the program will start
from the point at which it was
interrupted.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 19
daily use 19
Cancel a delay start or a washing
program in progress
● Simultaneously press and hold the
two program buttons positioned
over the word Cancel, until only
the POWER light is on. The
washing program has been
cancelled.
If a new washing program is to be
selected, check that there is
detergent in the detergent
dispenser.
End of the washing program
● The dishwasher will automatically
stop.
● The light of the program just ended
will remain on.
● Zero appears in the digital display.
1. Switch off the dishwasher by
pressing the POWER button.
2. Open the dishwasher’s door, leave
it ajar and wait a few minutes
before removing the dishes; in this
way they will be cooler and the
drying will be improved.
The dishwasher drying system is
provided with a device that allows air
to circulate inside the dishwasher to
prevent residual steam recondensing
on the dishes as water droplets.
Once the washing programe has
ended this device operates
intermittently for another 20
minutes, as long as the dishwasher
is switched on.
If the On/Off button is pressed or the
door is opened during these 20
minutes, the device will be
automatically cancelled.
Unloading the dishwasher
● Hot dishes are sensitive to knocks.
Dishes should therefore be allowed
to cool down before removing from
the appliance.
● Empty the lower basket first and
then the upper one; this will avoid
water dripping from the upper
basket onto the dishes in the lower
one.
● Water may appear on the sides
and the door of the dishwasher as
the stainless steel will eventually
become cooler than the dishes.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 20
20 washing programmes
Washing programmes
Program
RINSE
FAST_30
60° (1)
NORMAL
ECO (2)
NORMAL
65°
HEAVY
70°
Degree of
soil
Any.
Light soil
Normal soil
Type of load
Program description
Partial load
(to be
completed
later in the
day).
1 cold rinse (to avoid food
scraps from sticking together).
This program does not require
the use of detergent.
Crockery and
cutlery
Main wash up to 60°C
Final rinse
Crockery and
cutlery
Prewash
Main wash up to 50°C
Final rinse
Drying
Normal soil
Crockery,
cutlery, pots
and pans
Heavy soil
Crockery,
cutlery, pots
and pans
(1)
Ideal for washing a partially loaded
dishwasher. This is the perfect daily
program, made to meet the needs of
a family of 4 persons who only wish to
load breakfast and dinner crockery
and cutley.
Prewash
Main wash up to 65°C
2 intermediate rinses
Final rinse
Drying
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
(2)
The “NORMAL ECO” program is
recommended to wash a full 12 place
setting load of normally soiled dishes.
It saves energy and water. Because it
runs at a lower temperature, it is not
suitable for heavily soiled wash loads.
To save energy, dry performance is
reduced so you may have to open the
door at the end of the wash cycle or
even towel dry some dishes.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 21
care and cleaning 21
Care and cleaning
Cleaning the filters
The filters must be checked and
cleaned from time to time. Dirty filters
will degrade the washing result.
Before cleaning the filters ensure
that the machine is switched off.
4. Take hold of the coarse filter (A) by
the handle with the hole and
remove from the microfilter (B).
5. Clean all filters thoroughly under
running water.
6. Remove the flat filter from the
base of the washing compartment
and clean both faces thoroughly.
1. Open the door, remove the lower
basket.
2. The dishwasher filter system
comprises a coarse filter (A), a
microfilter (B) and a flat filter.
Unlock the filter system using the
handle on the microfilter, and
remove.
7. Put the flat filter back in the base
of the washing compartment and
ensure that it fits perfectly.
8. Place the coarse filter (A) in the
microfilter (B) and press together.
3. Turn the handle about 1/4 a turn
anticlockwise and remove.
9. Put the filter combination in place
and lock by turning the handle
clockwise to the stop. During this
process ensure that the flat filter
does not protrude above the base
of the washing compartment.
NEVER use the dishwasher without
filters. Incorrect repositioning and
fitting of the filters will produce
poor washing results and may
result in damage to the appliance.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 22
22 care and cleaning
NEVER try to remove the spray
arms.
If soil residue has clogged the holes
in the spray arms, remove them with a
toothpick.
External cleaning
Clean the external surfaces of the
machine and control panel with a
damp soft cloth. If necessary use only
mild detergents. Never use abrasive
products, scouring pads or solvent
(acetone, trichloroethylene etc....).
Ensure that the seals around the
door, the detergent and rinse aid
dispensers are cleaned regularly with
a damp cloth.
We recommend every 3 months to
run the wash program for heavy
soiled dishes using detergent but
without dishes.
Prolonged periods of nonoperation
If you are not using the machine for
any prolonged period of time you are
advised to:
1. Unplug the appliance and then
turn off the water.
2. Leave the door ajar to prevent the
formation of any unpleasant
smells.
3. Leave the inside of the machine
clean.
Frost precautions
Avoid placing the machine in a
location where the temperature is
below 0°C. If this is unavoidable,
empty the machine, close the
appliance door, disconnect the water
inlet pipe and empty it.
Moving the machine
If you have to move the machine
(moving house etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and
discharge hoses.
4. Pull the machine out together with
the hoses.
Avoid over tilting the machine during
transportation.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 23
care and cleaning 23
23 care and cleaning
Something not working
The dishwasher will not start or stops during operation.
Certain problems are due to the lack of simple maintenance or oversights,
which can be solved with the help of the indications described in the chart,
without calling out a service technician.
Switch off the dishwasher and carry out the following suggested corrective
actions.
Fault code
●
●
Malfunction
continuous flashing The dishwasher
of the light of the
does not fill with
running program●
water
appears in
the digital display
continuous flashing The dishwasher will
of the light of the
not drain
running program
●
appears in
the digital display
●
continuous flashing Anti-flood device is
of the light of the
activated
running program●
appears in
the digital display
Possible cause
Solution
Clean the water
tap
The water tap is
blocked or furred
with limescale
●
The water tap is
turned off
● The filter (where
present) in the
threaded hose
fitting at the water
inlet valve is
blocked
● The water inlet
hose has not been
correctly laid or it
is bent or
squashed
●
●
Check the water
inlet hose
connection
●
The sink spigot is
blocked
●
Clean out the sink
spigot
●
The water drain
hose has not been
correctly laid or it
is bent or
squashed
●
Check the water
drain hose
connection
●
Close the water
tap and contact
your local
Customer Care
Centre.
●
●
Turn the water tap
on
● Clean the filter in
the threaded hose
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 24
24 something not working
Fault code
Malfunction
The programdoes
not start
Once these checks have been carried
out, switch on the appliance. The
program will continue from the point at
which it was interrupted.
If the malfunction or fault code
reappears or for other fault codes not
described in the above chart, please
contact your Customer Care Centre,
quoting the model (Mod.), product
number (PNC) and serial number
(S.N.).
This information can be found on the
rating plate located on the side of the
dishwasher door.
Possible cause
Solution
●
The dishwasher
door has not been
properly closed
●
Close the door
●
The main plug is
not plugged in
●
Insert the main
plug
●
The fuse has
blown out in the
household fuse
box
●
Replace the fuse
●
Delay start has
been set
●
If dishes are to be
washed
immediately,
cancel the delay
start
So that you always have these
numbers at hand, we recommend you
note them here:
Mod. :. . . . . . . . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . . .
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 25
something not working 25
The wash results are not satisfactory
The dishes are not clean
●
The wrong washing program has been selected.
●
The dishes are arranged in such a way as to stop water
reaching all parts of the surface. The baskets must not
be overloaded.
●
The spray arms do not rotate freely due to incorrect
arrangement of the load.
●
The filters in the base of the washing compartment are
dirty or incorrectly positioned.
●
Too little or no detergent has been used.
●
The drain hose connection is not correct.
●
Rinse aid was not used.
●
The rinse aid dispenser is empty.
There are streaks, milky
spots or a bluish coating
on glasses and dishes
●
Decrease rinse aid dosing.
Water drops have dries
onto glasses and dishes
●
Increase rinse aid dosing.
●
The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.
The dishes are wet and
dull
If after all these checks, the problem
persists, contact your local Customer
Care Centre.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 26
26 technical data
Technical data
Dimensions
Width
59,6 cm
Height
82 cm
Depth
58,2 cm
Electrical connection
Voltage - Overall power Fuse
Information on the electrical connection is given
on the rating plate on the inner edge of the
dishwasher’s door
Water supply pressure
Minimum
Maximum cold water
Maximum hot water
Capacity
Max. weight
Subject to change without notice
50 kPa (7 psi)
800 kPa (116 psi)
350 kPa (51psi)
12 place settings
39 kg
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 27
technical data 27
Consumption values
Program
Program
duration
(in minutes)
Energy
consumption
(in kWh)
Water
consumption
(in litres)
Rinse
*
<0,1
4
FAST_30 60°
*
0,9
9
(Test programme
for test institutes)
*
0,82 - 0,92
14 - 16
NORMAL 65°
*
1,3 - 1,5
19 - 21
HEAVY 70°
*
1,8 - 2,0
23 - 25
NORMAL ECO
* The program duration is visible in
the digital display when the
washing program is selected.
The consumption values are intended
as a guide and depends on the
pressure and the temperature of the
water and also by the variations of the
power supply and the amount of
dishes.
117994720 15032007.qxp
28
3/16/2007
11:52 AM
Pagina 28
hints for test institutes
Hints for test institutes
Testing in accordance with AS/NZS
2007 must be carried out with the
appliance fully loaded and using the
test program (see "Consumption
values").
The rinse aid dispenser must be filled
and the door must be opened at the
end of cycle for 30 minutes for drying
assessment.
Full load: 12 standard place settings
Amount of detergent required:
10 g + 20 g (AS/NZS)
Rinse aid setting:
position 4 (AS/NZS)
Cup racks: position A
Arrangement upper basket
(remove the cup racks on the
right side)
Arrangement lower basket
Arrangement cutlery
basket
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 29
installation 29
Installation
Any electrical and/or plumbing
work required to install this
appliance should be carried out by
a qualified electrician and/or
plumber or competent person.
Remove all packaging before
positioning the machine.
If possible, position the machine next
to a water tap and a drain.
During all operations that involve
accessibility to internal components
the dishwasher has to be unplugged.
When inserting the machine, ensure
that the water inlet hose, the drain
hose and the supply cable are not
kinked or squashed.
Water supply connections
This dishwasher may be fed with
either hot (max. 60°) or cold water.
However, a hot water supply is not
always efficient with very soiled crockery
as it shortens the washing programmes
a lot. Therefore we recommend
connection to a cold water supply.
The water coupling nut fitted to the
machine’s supply hose is designed to
screw onto a 3/4" BSP thread spout.
The water pressure must be within the
limits given in the "Technical
specifications". Your local Water
Authority will advise you on the
average mains pressure in your area.
When the dishwasher is likely to be
connected to a solar hot water
system, drip heater, or any other
supply where temperatures in excess
of 60° are anticipated, a water
temperature tempering valve should
be installed. A pressure reducing
valve must be fitted if the hot water
supply pressure can exceed 350 kPa
or the cold supply pressure can
exceed 800 kPa.
The water inlet hose must not be
kinked, crushed, or entangled when it
is being connected.
The dishwasher features fill and drain
hoses which can be turned either to
the left or the right to suit the
installation by means of the locknut.
If the machine is connected to new
pipes or pipes which have not been
used for a long time, you should run
the water for a few minutes before
connecting the inlet hose.
Always use a new hose-set when
connecting the appliance to the
water mains. An old hose-set must
not be reused. The inlet hose
should be inspected every 12
months for deterioration and
replaced if necessary.
This appliance has been fitted with
safety features which will prevent the
water used in the appliance from
returning back into the drinking water
system. This appliance complies with
the applicable plumbing regulations.
117994720 15032007.qxp
30
3/16/2007
11:52 AM
Pagina 30
installation
Drain hose
- Connect drain hose to the sink.
Secure it with the supplied hose
clamp.
- Required height: 30 to 100 cm
above bottom of the dishwasher.
- If you use a drain hose extension
the total length should not be longer
than 4 metres. Likewise the internal
diameter of the couplings used for
connections to the waste outlet
must be no smaller than the
diameter of the hose provided.
Ensure the hose is not bent or
squashed as this could prevent or
slow down the discharge of water.
Likewise the internal diameter of the
couplings used for connections to the
waste outlet must be no smaller than
the diameter of the hose provided.
When connecting the drain hose to an
under sink trap spigot, the entire
plastic membrane must be
removed. Failure to remove all the
membrane will result in food particles
building up over time eventually
blocking the dishwasher drain hose
spigot.
Our appliances are supplied with a
security device to protect against
the return of dirty water back into
the machine.
If the spigot of your sink has a "no
return valve" incorporated this can
prevent the correct draining of your
dishwasher. We therefore advise
you to remove it.
Electrical connection
Safety standards require the
appliance to be earthed. Prior to
using the appliance for the first
time, ensure that the rated voltage
and type of supply on the rating
plate match that of the supply
where the appliance is to be
installed. The fuse rating is also to
be found on the rating plate.
Always plug the mains plug into a
correctly installed approved socket.
Multi-way plugs, connectors and
extension cables must not be used.
This could constitute a fire hazard
through overheating.
If necessary, have the domestic
wiring system socket replaced. If
the electrical supply cord has to be
replaced, contact your local
Customer Care centre.
The plug must be accessible after
the appliance has been installed.
Never unplug the appliance by
pulling on the cable. Always pull
the plug.
The manufacturer accepts no
liability for failure to observe the
above safety precautions.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 31
building-in 31
Building-in
This dishwasher is designed to be
fitted either under a kitchen counter or
a worksurface.
It is essential that the recess
dimensions indicated in the illustration
are followed.
No further openings for venting of the
dishwasher are required, but only to
let the water fill and drain hose and
power supply cable pass through.
The height of the recess where the
dishwasher is to be installed can vary
between 820 and 880 mm from the
floor since the dishwasher is fitted
with adjustable feet (max. 60 mm).
Leave a space of 2 mm between the
top of the dishwasher and the
underside of the kitchen counter.
Adjusting the height of the
dishwasher
To adjust the height proceed as
follows:
1. Loosen or tighten the two front
feet.
2. Loosen and remove the adjustable
plinth.
3. Adjust the rear foot by turning the
screw in the middle of the front
kick plate to the left or to the right.
Good levelling is essential for correct
closure and sealing of the door. When
the appliance is correctly levelled, the
door will not catch on the levelling
spacers on either side of the cabinet.
If the door does not close properly,
loosen or tighten the adjustable feet
until the machine is perfectly level.
Adjusting the height of the plinth
It is important for the dishwasher to
be absolutely horizontal so that the
door seals properly.
The adjustable feet are to be turned
to the left or right until the dishwasher
is horizontal.
If there is a space at the bottom of the
machine,this can be covered by
lowering the plinth.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 32
32 building-in
Fitting the steam protection
Fit the steam protection onto the front
part of the worktop, using the screws
provided.
600 mm
Securing the dishwasher
Secure the dishwasher by screwing it
firmly in position under the bench or
to the cupboard beside it. Use the
angular brackets supplied which are
fitted into the slots on the top of the
dishwasher (see fig.).
Tighten the machine in position
(upwards or sideways) by using the
screws supplied (3.5 x 16 mm).
Tighten the screws so that the
dishwasher cannot tip forward and
cause damage when the door is open
and loaded.
The dishwasher must be secured
to the underside of the worktop or
to adjacent units by using the
brackets supplied.
Neglect to do this can cause injury
or damage.
Under no circumstances may holes
be drilled through the sides of the
dishwasher since this could
damage the hydraulic components.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 33
environment concerns 33
Environment concerns
Packaging material
The packaging materials include
recyclable items. The plastic
components are identified by
markings, e.g. >PE<, >PS<, etc.
Please dispose of the packaging
materials in the appropriate container
at the community waste disposal
facilities.
When a unit is no longer being used:
- Pull the plug out of the socket.
- Cut off the cable and plug and
dispose of them.
- Dispose of the door catch. This
prevents children from trapping
themselves inside and
endangering their lives.
Old appliance
This appliance should be handed over
to the applicable collection point for
recycling. By ensuring this product is
disposed of correctly, you will help
prevent potential negative
consequences for the environment
and human health, which could
otherwise be caused by inappropriate
waste handling of this product.
For more detailed information about
recycling of this product, please
contact your local city office, your
household waste disposal service or
the shop where you purchased the
product.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 34
34 warranty
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: Dishwasher
This document sets out the terms and conditions of
product warranties for Electrolux branded appliances.
It is an important document. Please keep it with your
proof of purchase documents in a safe place for future
reference should you require service for your
Electrolux appliance.
General Terms and Conditions
1. In this warranty
(a) "Electrolux" means Electrolux Home Products Pty
Ltd ABN 51 004 762 341 in respect of Appliances
purchased in Australia and Electrolux (NZ) Limited in
respect of Appliances purchased in New Zealand;
(b) "Appliance" means any Electrolux product
purchased by you accompanied by this document;
(c) "Warranty Period" means
(i) where you use the Appliance for personal,
domestic or household purposes in Australia the
period of 24 months and in New Zealand the
period of 24 months;
(ii) where you use the Appliance for commercial
purposes, in Australia the period of 0 months and
in New Zealand the period of 0 months, (if the
period stated is 0 months you are not covered
by this product warranty) following the date of
original purchase of the Appliance;
(d) "you" means the purchaser of the Appliance not
having purchased the appliance for re-sale, and
"your" has a corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia or New Zealand and is in addition
to (and does not exclude, restrict, or modify in any
way) any non-excludable statutory warranties in
Australia or New Zealand.
3. Electrolux warrants that, when dispatched from an
Electrolux warehouse, the Appliance is free from defects
in materials and workmanship for the Warranty Period.
5. Parts and Appliances not supplied by Electrolux are not
covered by this warranty.
6. Where you are within an Electrolux service area, this
warranty covers the cost of transport of the Appliance
to and from Authorised Service Centres of Electrolux
and travelling costs for representatives of the
Authorised Service Centre to and from your home or
business. If you are outside an Electrolux service area,
you will bear these costs. For information about
whether you are within an Electrolux service area,
please phone 13 13 49 in Australia, or 0800 10 66 10
in New Zealand.
7. Proof of purchase is required before you can make a
claim under this warranty.
8. You may not make a claim under this warranty unless
the defect claimed is due to faulty or defective parts or
workmanship.
Electrolux is not liable in the following situations (which
are not exhaustive):
(a) The Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly
maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or
incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation.
(b) The Appliance is modified without authority from
Electrolux in writing.
(c) The Appliance’s serial number or warranty seal has
been removed or defaced.
(d) The Appliance was serviced or repaired by anyone
other than Electrolux or its Authorised Service
Centres.
9. This warranty, the contract to which it relates and the
relationship between you and Electrolux are governed
by the law applicable in the Australian State where the
4. During the Warranty Period Electrolux or its Authorised
Appliance was purchased or the law applicable in New
Service Centre will, at no extra charge if your appliance
Zealand if the Appliance was purchased in New
is readily accessible without special equipment, and
Zealand. Where the Appliance was purchased in New
subject to these terms and conditions, repair or replace
Zealand for business purposes the Consumer
any parts which it considers to be defective. You agree
Guarantee Act does not apply.
that any replaced Appliances or parts become the
property of Electrolux. This warranty does not apply to
light globes, batteries, filters or similar perishable parts.
117994720 15032007.qxp
3/16/2007
11:52 AM
Pagina 35
warranty 35
Limitation of Liability
10. To the extent permitted by law:
(a) Electrolux excludes all warranties other than as
contained in this document;
(b) Electrolux shall not be liable for any loss or
damage whether direct or indirect or consequential
arising from your purchase, use or non-use of the
Appliance.
11. Provisions of the Trade Practices Act and State
consumer legislation in Australia, and the Consumer
Guarantees Act, the Sale of Goods Act and the Fair
Trading Act in New Zealand, imply warranties or
conditions, or impose obligations, upon Electrolux
which cannot be excluded, restricted or modified. To
the extent permitted by law, the liability of
Electrolux (if any) arising out of or in relation to the
Appliance or any services supplied by Electrolux shall
be limited (where it is fair and reasonable to do so):
(a) in the case of Appliances, at its option, to the
replacement or repair of the Appliances or the
supply of equivalent products or the
payment of the cost of replacing the Appliances or
having the Appliances repaired or of acquiring
equivalent Appliances. Upon being replaced, parts
and Appliances become the property of Electrolux;
or
(b) in the case of services, at its option, to the supply
of the services again or the payment of the cost of
having the services re-supplied;
and in the case of Appliances or services supplied in New
Zealand, loss or damage whether direct or indirect or
consequential that is reasonably foreseeable.
Privacy
You acknowledge that in the event that you make a
warranty claim it will be necessary for Electrolux and its
Authorised Service Centres to exchange information in
relation to you to enable Electrolux to meet its obligations
under this warranty.
Important Notice
Before Calling a Service Technician please check carefully the operating instructions, service booklet and the warranty terms
and conditions.
FOR SERVICE
OR TO FIND THE ADDRESS
OF YOUR NEAREST STATE
SERVICE CENTRE IN
AUSTRALIA
Please call 13 13 49
For the cost of a local call
(Australia only)
FOR SERVICE
OR TO FIND THE ADDRESS
SERVICE AUSTRALIA
FOR SPARE PARTS
OR TO FIND THE ADDRESS OF
YOUR NEAREST STATE SPARE
PARTS CENTRE IN AUSTRALIA
Please call 13 13 50
ELECTROLUX HOME PRODUCTS
For the cost of a local call (Australia only)
NEW ZEALAND SPARE PARTS CENTRE
AUCKLAND Prime Distributors Ltd. 8 Highbrook Drive, East Tamaki . . . . . (09) 273 3580
OF YOUR NEAREST STATE CHRISTCHURCH Prime Distributors Ltd. Unit 1, 127 Montreal Street . . . . (03) 377 1009
SERVICE CENTRE IN NEW
R. Redpath Ltd. 55 Ferry Road . . . . . . . . . . . . . . . . . . (03) 379 0446
ZEALAND
DUNEDIN Appliance Parts Company, 590 Hillside Road . . . . . . . . . . . . . . (03) 455 5443
Free call 0800 10 66 10
(New Zealand only)
ELECTROLUX HOME PRODUCTS
117994720 15032007.qxp
3/16/2007
11:52 AM
www.electrolux.com
www.westinghouse.com.au
117 994 720 -00-15032007
Pagina 36
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement