Tiba | EL10GK553 | User manual | Tiba EL10GK553 User Manual

Tiba EL10GK553 User Manual
User manual
Hob
EL10GK553
2
CONTENTS
Safety information
Safety instructions
Product description
Daily use
Helpful hints and tips
Care and cleaning
2
3
5
6
8
8
Troubleshooting
Installation instructions
Technical information
Environment concerns
Garantie, Garanzia, Guarantee
9
10
11
12
12
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Children and vulnerable people safety
Warning! Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they are supervised by an adult or a person who is responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot.
• If the appliance has a child safety device, we recommend
that you activate it.
• Cleaning and user maintenance shall not be made by children without supervision.
General Safety
• The appliance and its accessible parts become hot during
use. Do not touch the heating elements.
• Do not operate the appliance by means of an external timer
or separate remote-control system.
• Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
3
• Never try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they can get
hot.
• If the glass ceramic surface is cracked, switch off the appliance to avoid the possibility of electric shock.
SAFETY INSTRUCTIONS
Installation
Warning! Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied
with the appliance.
• Keep the minimum distance from the
other appliances and units.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance from
steam and moisture.
• Do not install the appliance adjacent to a
door or under a window. This prevents
hot cookware to fall from the appliance
when the door or the window is opened.
• If the appliance is installed above drawers
make sure that the space, between the
bottom of the appliance and the upper
drawer, is sufficient for air circulation.
• The bottom of the appliance can get hot.
We recommend to install a non-combustile separation panel under the appliance
to prevent access to the bottom.
Electrical connection
Warning! Risk of fire and electrical
shock.
• All electrical connections must be made
by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets
• Make sure the appliance is installed correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.
• Make sure that a shock protection is installed.
• Use the strain relief clamp on cable.
• Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact the Service or an electrician to change a damaged mains cable.
• The electrical installation must have an
isolation device which lets you disconnect the appliance from the mains at all
poles. The isolation device must have a
contact opening width of minimum 3
mm.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
4
Use
Warning! Risk of injury, burns or
electric shock.
• Use this appliance in a household environment.
• Do not change the specification of this
appliance.
• Do not use an external timer or a separate remote-control system to operate
the appliance.
• Do not let the appliance stay unattended
during operation.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not put cutlery or saucepan lids on
the cooking zones. They become hot.
• Set the cooking zone to “off” after use.
• Do not use the appliance as a work surface or as a storage surface.
• If the surface of the appliance is cracked,
disconnect immediately the appliance
from the power supply. This to prevent
an electrical shock.
Warning! Risk of fire or explosion.
• Fats and oil when heated can release
flammable vapours. Keep flames or heated objects away from fats and oils when
you cook with them.
• The vapours that very hot oil releases can
cause spontaneous combustion.
• Used oil, that can contain food remnants,
can cause fire at a lower temperature
than oil used for the first time.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
• Do not try to extinguish a fire with water.
Disconnect the appliance and cover the
flame with a lid or a fire blanket.
Warning! Risk of damage to the
appliance.
• Do not keep hot cookware on the control
panel.
• Do not let cookware to boil dry.
• Be careful not to let objects or cookware
fall on the appliance. The surface can be
damaged.
• Do not activate the cooking zones with
empty cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron, aluminium
or with a damaged bottom can cause
scratches on the glass ceramic. Always
lift these objects up when you have to
move them on the cooking surface.
Care and Cleaning
Warning! Risk of damage to the
appliance.
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
Disposal
Warning! Risk of injury or suffocation.
• Contact your municipal authority for information on how to discard the appliance
correctly.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
5
PRODUCT DESCRIPTION
General overview
1
2
145 mm
1
2
3
4
140/210 mm
180 mm
4
Cooking zone
Cooking zone
Control panel
Cooking zone
3
Control panel layout
1
2
3
4
9
5
6
7
8
Use the sensor fields to operate the appliance. The displays, indicators and
sounds tell which functions operate.
sensor field
function
1
To activate and deactivate the appliance.
2
To lock / unlock the control panel.
3
A heat setting display
To show the heat setting.
4
Timer indicators of cooking zones
To show for which zone you set the time.
5
The timer display
To show the time in minutes.
6
/
To activate and deactivate the outer ring.
7
8
To increase or decrease the heat setting.
/
To increase or decrease the time.
6
sensor field
function
To select a cooking zone.
9
To activate and deactivate the outer ring.
10
Heat setting displays
Display
Description
The cooking zone is deactivated.
-
The cooking zone operates.
The Keep Warm function operates.
The Automatic Heat Up function operates.
There is a malfunction.
The cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
The Automatic Switch Off operates.
Residual heat indicator
Warning!
The risk of burns from
residual heat!
DAILY USE
Activation and deactivation
Touch
for 1 second to activate or deactivate the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 seconds, (a pan, a cloth, etc.). An acoustic
signal sound some time and the appliance deactivates. Remove the object or
clean the control panel.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deactivates. See below.
• The relation between heat setting and
times of the Automatic Switch Off function:
•
,
— 6 hours
•
— 5 hours
•
— 4 hours
•
-
— 1.5 hours
The heat setting
Touch
to increase the heat setting.
to decrease the heat setting. The
Touch
display shows the heat setting. Touch
and
at the same time to deactivate the
cooking zone.
Activation and deactivation of
the outer ring
You can adjust the surface you cook to the
dimension of the cookware.
To activate the outer ring touch the sensor
field
. The indicator comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.
Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the necessary heat setting.
7
To start the Automatic Heat Up function the
cooking zone must be cold (no
in the
display). Touch
of the cooking zone
again and again until the necessary heat
setting comes on. After 3 seconds
comes on in the display.
To stop the function, touch
.
11
10
9
Minute Minder
You can use the Timer as a Minute Minder while the cooking zones do not operate.
. Touch
or
to set the time.
Touch
When the time comes to an end, the sound
operates and 00 flashes
• To stop the sound: touch
Lock
8
7
6
5
4
3
2
1
0
When the time comes to an end, the sound
operates and 00 flashes. The cooking zone
deactivates.
• To stop the sound: touch
1
2
3
4
5
6
7
8
9
Timer
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
or
of the timer to set the
touch
time ( 00 - 99 minutes). When the indicator of the cooking zone starts to flash
slow, the time counts down.
• To deactivate the Timer: set the cookand touch
to deactiing zone with
vate the Timer. The remaining time
counts back to 00 . The indicator of the
cooking zone goes out.
• To see the remaining time: set the
. The indicator of
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
When the cooking zones operate, you can
. It prelock the control panel, but not
vents an accidental change of the heat setting.
First set the heat setting.
. The symbol
To start this function touch
comes on for 4 seconds.
The Timer stays on.
. The heat
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also stop
this function.
The Child Safety Device
This function prevents an accidental operation of the appliance.
To activate The Child Safety Device
• Activate the appliance with
. Do not
set the heat settings.
• Touch
for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
.
To deactivate The Child Safety Device
• Activate the appliance with
. Do not
for 4
set the heat settings. Touch
seconds. The symbol
comes on.
• Deactivate the appliance with
.
To override The Child Safety Device for
only one cooking time
• Activate the appliance with
. The symbol
comes on.
• Touch
for 4 seconds. Set the heat
setting in 10 seconds. You can operate
the appliance.
8
• When you deactivate the appliance with
, The Child Safety Device operates
again.
HELPFUL HINTS AND TIPS
Cookware
Information about the cookware
• The bottom of the cookware must be as
thick and flat as possible.
• Cookware made of enamelled steel and
with aluminium or copper bottoms can
cause the colour change on the glass-ceramic surface.
Energy saving
• If it is possible, always put the lids on the
cookware.
• Put cookware on a cooking zone before
you start it.
• Stop the cooking zones before the end of
the cooking time to use residual heat.
• The bottom of pans and cooking zones
must have the same dimension.
The Examples of cooking
applications
The data in the table is for guidance only.
How to save energy
Heat
setting
Use to:
Time
Hints
1
Keep warm the food you cooked
as required
Put a lid on a cookware
1-2
Hollandaise sauce, melt: butter, chocolate, gelatine
5-25
min
Mix from time to time
1-2
Solidify: fluffy omelettes, baked eggs
10-40
min
Cook with a lid on
2-3
Simmer rice and milkbased dishes,
heating up ready-cooked meals
25-50
min
Add the minimum twice as much
liquid as rice, mix milk dishes part
procedure through
3-4
Steam vegetables, fish, meat
20-45
min
Add some tablespoons of liquid
4-5
Steam potatoes
20-60
min
Use max. ¼ l water for 750 g of potatoes
4-5
Cook larger quantities of food, stews
and soups
60-150
min
Up to 3 l liquid plus ingredients
6-7
Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
as necessary
Turn halfway through
7-8
Heavy fry, hash browns, loin steaks,
steaks
5-15
min
Turn halfway through
9
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus,
we recommend that you cook at the lowest
temperatures and do not brown food too
much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
9
Scratches or dark stains on the glassceramic cause no effect on how the
appliance operates.
To remove the dirt:
1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If
not, the dirt can cause damage to
the appliance. Use a special scraper
for the glass . Put the scraper on the
glass surface at an acute angle and
move the blade on the surface .
– Remove after the appliance is
sufficiently cool: limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic or stainless
steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
TROUBLESHOOTING
Problem
Possible cause
Remedy
You cannot activate or operate
the appliance.
The appliance is not connected to an electrical supply or it
is connected incorrectly.
Check if the appliance is correctly connected to the electrical
supply (refer to connection diagram).
Activate the appliance again and
set the heat setting in less than
10 seconds.
You touched 2 or more sensor
fields at the same time.
Touch only one sensor field.
There is water or fat stains on
the control panel.
Clean the control panel.
An acoustic signal sounds and
the appliance deactivates.
An acoustic signal sounds
when the appliance is deactivated.
You put something on one or
more sensor fields.
Remove the object from the
sensor fields.
The appliance deactivates.
You put something on the sensor field
.
Remove the object from the
sensor field.
The residual heat indicator
does not come on.
The cooking zone is not hot
because it operated only for a
short time.
If the cooking zone operated
sufficiently long to be hot, speak
to the service centre.
The Automatic Heat Up function does not operate.
The cooking zone is hot.
Let the cooking zone become
sufficiently cool.
The highest heat setting is set.
The highest heat setting has the
same power as the Automatic
Heat Up function.
You decreased the heat setting Start from
and only increase
the heat setting.
from
.
The sensor fields become hot.
The cookware is too large or
you put it too near to the controls.
Put large cookware on the rear
cooking zones if necessary.
comes on.
The Automatic Switch Off operates.
Deactivate the appliance and
activate it again.
comes on.
The Child Safety Device or the
Lock function operates.
Refer to the chapter “Daily Use”.
10
Problem
and a number come on.
Possible cause
There is an error in the appliance.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the customer service. Give the data from
the rating plate, three digit letter code for
the glass ceramic (it is in the corner of the
glass surface) and an error message that
comes on.
Remedy
Disconnect the appliance from
the electrical supply for some
time. Disconnect the fuse from
the electrical system of the
house. Connect it again. If
comes on again, speak to the
service center.
Make sure, you operated the appliance correctly. If not the servicing by a customer
service technician or dealer will not be free
of charge, also during the warranty period.
The instructions about the customer service
and conditions of guarantee are in the guarantee booklet.
INSTALLATION INSTRUCTIONS
Warning! Refer to "Safety information"
chapter.
Before the installation
Before the installation of the appliance, record the information below from the rating
plate. The rating plate is on the bottom of
the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................
Warning! During installation in
combustible matter, NIN SEV 1000 and
fire protection guidelines and
regulations of the Association of
Cantonal Fire Insurance shall be strictly
adhered to.
Built-in appliances
• Only use the built-in appliances after you
assemble the appliance into correct builtin units and work surfaces that align to
the standards.
Connection cable
• The appliance is supplied with the connection cable.
• Replace the damaged mains cable with a
special cable (type H05VV-F or higher).
Speak to your local Service Centre.
Electrical connection
• Install the appliance with a socket supply
line. If there is no socket supply line, the
fixed home electrical system must include
an isolating device with at least a 3 mmcontact separation to enable a simultaneous and all-pole cut off from the mains
(according to NIN SEV 1000).
1
2
3
1
2
3
1
2
3
1
2
3
11
Assembly
475 x 510
471 x 506
min.
500mm
min.
50mm
40
445 x 485
456 x 498
Zwischenboden / Fond / Fondo
min. 20
471
506
1.6 m
90
37.5
512
max. R6
498
463
600
477
52.5
7+0.5
498
463
7
TECHNICAL INFORMATION
Model EL10GK553
Prod.Nr. 941 689 019 01
Typ 240.7
400 V 50 Hz
Made in Switzerland
Ser.Nr. ..........
TIBA
Cooking zones power
5.2 kW
12
Cooking zone
Nominal Power (Max heat setting) [W]
Middle rear —140 / 210 mm
1000 / 2200 W
Left rear — 145 mm
1200 W
Left front — 180 mm
1800 W
ENVIRONMENT CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
CH
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging materials are friendly to
the environment and can be recycled.
The plastic components are identified
by marking: >PE<,>PS<, etc. Discard
the packaging materials as household
waste at the waste disposal facilities in
your municipality.
GARANTIE, GARANZIA, GUARANTEE
Kundendienst, service-clientèle, Servizio clienti, Customer Service
Centres
Servicestellen
5506 Mägenwil/Zürich Industriestrasse 10
Points de Service
3018 Bern Morgenstrasse 131
Servizio dopo
vendita
Point of Service
1028 Préverenges
Le Trési 6
6916 Grancia Zona Industriale E
9000 St. Gallen Zürcherstrasse
204e
4052 Basel St. Jakob-Turm
Birsstrasse 320B
6020 Emmenbrücke Seetalstrasse 11
7000 Chur Comercialstrasse 19
Ersatzteilverkauf/Points de vente de rechange/Vendita pezzi di ricambio/
spare parts service:
5506 Mägenwil, Industriestrasse 10, Tel.
0848 848 111
Fachberatung/Verkauf/Demonstration/
Vente/Consulente (cucina)/Vendita
8048 Zürich, Badenerstrasse 587, Tel. 044
405 81 11
Garantie Für jedes Produkt gewähren wir
ab Verkauf bzw. Lieferdatum an den Endverbraucher eine Garantie von 2 Jahren.
(Ausweis durch Garantieschein, Faktura
oder Verkaufsbeleg). Die Garantieleistung
umfasst die Kosten für Material, Arbeitsund Reisezeit. Die Garantieleistung entfällt
bei Nichtbeachtung der Gebrauchsanweisung und Betriebs-vorschriften, unsachgerechter Installation, sowie bei Beschädigung
durch äussere Einflüsse, höhere Gewalt,
Eingriffe Dritter und Verwendung von NichtOriginal Teilen.
Garantie Nous octroyons sur chaque produit 2 ans de garantie à partir de la date de
livraison ou de la mise en service au consommateur (documenté au moyen d’une
13
facture, d’un bon de garantie ou d’un justificatif d’achat). Notre garantie couvre les frais
de mains d’œuvres et de déplacement, ainsi que les pièces de rechange. Les conditions de garantie ne sont pas valables en
cas d’intervention d’un tiers non autorisé,
de l’emploi de pièces de rechange non
originales, d’erreurs de maniement ou d’installation dues à l’inobser-vation du mode
d’emploi, et pour des dommages causés
par des influences extérieures ou de force
majeure.
Garanzia Per ogni prodotto concediamo
una garanzia di 2 anni a partire dalla data di
consegna o dalla sua messa in funzione. (fa
stato la data della fattura, del certificato di
garanzia o dello scontrino d’acquisto) Nella
garanzia sono comprese le spese di manodopera, di viaggio e del materiale. Dalla co-
pertura sono esclusi il logoramento ed i
danni causati da agenti esterni, intervento di
terzi, utilizzo di ricambi non originali o dalla
inosservanza delle prescrizioni d’istallazione
ed istruzioni per l’uso.
Warranty For each product we provide a
two-year guarantee from the date of purchase or delivery to the consumer (with a
guarantee certificate, invoice or sales receipt serving as proof). The guarantee covers the costs of materials, labour and travel.
The guarantee will lapse if the operating instructions and conditions of use are not adhered to, if the product is incorrectly installed, or in the event of damage caused by
external influences, force majeure, intervention by third parties or the use of non-genuine components.
14
15
Impressum
TIBA AG, CH-Bubendorf
Technische und optische Änderungen sowie Satz- und Druckfehler vorbehalten!
©
Dokumentenversion 892955155-A-282012
TIBA AG
Hauptstrasse 147
4416 Bubendorf
Telefon 061 935 17 10
Telefax 061 931 11 61
www.tiba.ch
info@tiba.ch
TIBA SA
Rue des Tunnels 38
2000 Neuchâtel
Téléphone 032 737 74 74
Téléfax 032 737 74 80
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising