Casio | fx-CG500 App | Mode d'emploi | Casio fx-CG500 App Mode d'emploi

Pour fx-CG500
CASIO fx-CG500 App
(pour Android, pour iOS)
Mode d’emploi
URL du site web CASIO Education
https://edu.casio.com
Des manuels sont disponibles en plusieurs langues à
https://world.casio.com/manual/calc/
FR
Informations préliminaires
• Vous pouvez utiliser votre fx-CG500 App pour développer des programmes et eActivity en
utilisant les mêmes commandes que celles de la fx-CG500. Les programmes et les eActivity
peuvent être enregistrés sur votre dispositif mobile.
• La fx-CG500 App présente les fonctionnalités suivantes.
· Emulation de la fx-CG500, permettant d’effectuer des opérations de la fx-CG500 sur votre
dispositif mobile
· Capture d’écran d’émulation de la fx-CG500 (dans le presse-papiers)
· Copie et collage de données (texte, valeurs, expressions, etc.) entre la fx-CG500 App et
d’autres applications
Remarque
• Reportez-vous au mode d’emploi de la fx-CG500 pour le détail sur le fonctionnement de
l’émulateur de la fx-CG500.
• Les exemples d’écran dans ce mode d’emploi servent à titre illustratif seulement. Dans la
pratique, le texte et les valeurs affichés pourront être différents des exemples figurant dans ce
mode d’emploi.
Configuration système requise
Android
Systèmes d’exploitation : Android 5.0, Android 6.0, Android 7.0, Android 8.0
iOS
Systèmes d’exploitation : iOS 11, iOS 12
Remarque
• Pour obtenir les dernières informations sur la configuration requise, visitez le site Internet à l’URL
ci-dessous : https://edu.casio.com/requirements/app/
• Android, Gmail et Chrome sont des marques commerciales ou des marques déposées de Google
LCC.
• iOS est une marque commerciale ou une marque déposée de Cisco Systems, Inc. aux ÉtatsUnis.
• Les noms de sociétés et de produits mentionnés ici sont des marques commerciales de leurs
détenteurs respectifs.
• Notez que la marque commerciale ™ et la marque déposée ® ne sont pas utilisées dans le texte
de ce mode d’emploi.
FR-1
Sommaire
Chapitre 1 Aperçu de la fx-CG500 App .................................................... FR-3
Différences entre la fx-CG500 App et les fonctions des applications de la
fx-CG500 ......................................................................................................... FR-3
Données de la fx-CG500 App ......................................................................... FR-3
Mode d’affichage de la fx-CG500 App ............................................................ FR-4
Chapitre 2 Opérations de la fx-CG500 App ............................................. FR-6
Copier et Coller ............................................................................................... FR-6
Enregistrement de l’image de capture d’écran................................................ FR-7
Opérations sur les fichiers vcp (Nouveau, Ouvrir, Enregistrer,
Enregister sous) .............................................................................................. FR-7
Effacement de la mémoire principale (Réinitialisation) ................................... FR-8
Génération de données MathML..................................................................... FR-8
Copie d’expressions algébriques et de texte sous forme de texte Unicode.... FR-9
Écran d’informations ..................................................................................... FR-10
Commandes du menu tiroir ........................................................................... FR-12
FR-2
Chapitre 1
Aperçu de la fx-CG500 App
La fx-CG500 App représente, sur l’écran de votre dispositif mobile, une fx-CG500 virtuelle que
vous pouvez utiliser pour effectuer presque toutes les opérations disponibles sur votre fx-CG500.
Les différences entre les opérations effectuées sur la fx-CG500 App et celles effectuées sur
la fx-CG500 proprement dit, et les différences parmi les deux modes de la fx-CG500 App sont
expliquées dans ce qui suit.
Différences entre la fx-CG500 App et les fonctions des
applications de la fx-CG500
Les différences entre la fx-CG500 App et les fonctions des applications de la fx-CG500 sont les
suivantes.
• Certains réglages et certaines fonctions de la fx-CG500 qui sont inutiles lorsque vous utilisez la
fx-CG500 sur un dispositif mobile (par exemple le réglage du panneau tactile) sont désactivés sur
la fx-CG500 App. Le message « Unavailable » s’affiche sur l’écran si vous essayez d’accéder à
un réglage ou à une fonction désactivé.
• L’application E-CON3 n’est pas prise en charge par la fx-CG500 App.
Données de la fx-CG500 App
Les données eActivity de la fx-CG500 sont enregistrées dans une zone de la mémoire et toutes
les autres données (données d’application et variables) sont enregistrées dans une autre zone
de la mémoire. Les données eActivity se trouvent dans la « zone eActivity » tandis que les autres
données se trouvent dans la « mémoire principale ». Pour des détails, voir le mode d’emploi de la
fx-CG500.
La fx-CG500 App enregistre les deux types de données sur votre dispositif mobile dans des fichiers
de format « Fichier virtuel » (.vcp). Par défaut, le fichier nommé « default.vcp » utilisé comme
« document actif » de la fx-CG500 App est créé automatiquement.
FR-3
Mode d’affichage de la fx-CG500 App
La fx-CG500 App possède deux modes d’affichage : le mode mobile et le mode calculatrice.
• Le mode calculatrice affiche une fx-CG500 virtuelle qui semble presque identique à votre unité
fx-CG500.
1
43
1
4
2
Mode mobile
1 Bouton de menu (
Mode calculatrice
) … Affiche le menu tiroir.
2 Barre d’onglets
,
,
,
… Identiques aux icônes suivantes sur le panneau d’icônes de la fx-CG500 :
m, M, r, S.
… Bascule entre l’affichage et le masquage d’un clavier tactile en bas de l’écran.
3 Bouton Échap (
) … Identique à l’icône suivante sur le panneau d’icônes de la fx-CG500 : l.
4 Bouton d’informations (
) … Affiche un écran d’informations.
Q Pour entrer en mode mobile ou en mode calculatrice
1. Appuyez sur
- [Window].
2. Appuyez sur [Mobile Mode] ou [Calculator Mode].
FR-4
Q Pour utiliser le clavier tactile (mode mobile uniquement)
Dans la barre d’onglets, appuyez sur
dessous.
pour afficher un clavier tactile comme celui affiché ci-
Touches de curseur
• Les touches de curseur correspondent à celles de la fx-CG500.
• Vous pouvez modifier le groupe de touches actuel de la même manière qu’avec le clavier tactile
de la fx-CG500.
[Number]
[Math1]
[Math2]
[Math3]
[Trig]
[Var]
[Catalog]
[abc]
[Advance]
FR-5
Chapitre 2
Opérations de la fx-CG500 App
Cette section explique les opérations pouvant être effectuées sur les écrans du mode mobile et du
mode calculatrice de la fx-CG500 App.
Copier et Coller
Q Pour copier un texte alphanumérique affiché sur l’écran dans le presse-papiers
1. Sur la fx-CG500 App, sélectionnez le texte que vous souhaitez copier.
2. Appuyez sur
- [Edit] - [Copy Special] - [Unicode].
• Le texte sélectionné à l’étape 1 dans le presse-papiers est copié (sous forme de texte
Unicode).
• Vous pouvez ensuite coller le texte copié dans une autre application (sous forme de texte
Unicode).
Q Pour coller du texte copié dans le presse-papiers dans la fx-CG500 App
1. Dans d’autres applications, copiez le texte que vous voulez dans le presse-papiers.
2. Dans la fx-CG500 App, ouvrez l’application de la fx-CG500 dans laquelle vous voulez coller le
texte copié dans le presse-papiers.
3. Appuyez sur
- [Edit] - [Paste Special].
• Le texte copié dans le presse-papiers est collé dans la fx-CG500 App.
Remarque
« Paste Special » détecte ce qui est dans le presse-papiers et le colle sous forme de texte ou de
données MathML.
Vous pouvez utiliser « Paste Special » pour coller du texte ou des données MathML créées par
d’autres applications.
Avertissement important
Lorsque la fx-CG500 détecte des données MathML dans le presse-papiers, il essaie de les coller
sous forme math 2D (forme de saisie naturelle) sans vous avertir. Il n’est pas garanti que le format
des données collées sera identique à celui des données copiées d’autres applications.
FR-6
Enregistrement de l’image de capture d’écran
Q Pour enregistrer une image de capture d’écran
1. Affichez l’écran dont vous souhaitez enregistrer l’image.
2. Appuyez sur
- [Edit] - [Capture Screen].
Astuce
• Si vous souhaitez enregistrer la fenêtre active uniquement, appuyez sur ce qui suit à l’étape 2 :
- [Edit] - [Capture Current Panel].
Opérations sur les fichiers vcp (Nouveau, Ouvrir,
Enregistrer, Enregister sous)
Cette section explique comment effectuer les opérations suivantes avec les fichiers vcp sur la
fx-CG500 App : Nouveau, Ouvrir, Enregistrer et Enregistrer sous.
Q Pour créer un nouveau fichier vcp
1. Appuyez sur
- [File] - [New].
2. Tapez le nom du nouveau fichier dans la case « File Name ».
3. Appuyez sur [Save].
• Le nouveau fichier vcp est créé et devient le document actif.
Q Pour ouvrir un fichier vcp existant
1. Appuyez sur
- [File] - [Open].
2. Sélectionnez le fichier que vous voulez ouvrir et appuyez sur [Open].
• Le fichier sélectionné s’ouvre et devient le document actif.
Q Pour enregistrer un fichier vcp ouvert
Appuyez sur
- [File] - [Save].
Remarque
Le document actif est automatiquement enregistré lorsque vous fermez la fx-CG500 App. La
prochaine fois que vous ouvrirez la fx-CG500 App, le document actif qui était ouvert lors de la
dernière session s’ouvrira automatiquement.
Q Pour enregistrer un fichier vcp ouvert sous un autre nom
1. Appuyez sur
- [File] - [Save As].
2. Tapez le nouveau nom dans la case « File Name ».
FR-7
3. Appuyez sur [Save].
• Le fichier vcp actuellement ouvert est enregistré sous son nouveau nom et le nouveau fichier
devient le document actif.
Q Pour joindre un fichier vcp à un e-mail
1. Appuyez sur
- [File] - [Send].
• Ceci affiche la boîte de dialogue d’envoi.
2. Sélectionnez le fichier que vous souhaitez envoyer et puis appuyez sur [Open].
• Ceci démarre la messagerie avec le fichier joint.
Remarque
• Si le dispositif mobile qui reçoit l’e-mail possède la fx-CG500 App installée, ouvrir le fichier
démarre la fx-CG500 App. Toutefois, cette opération est limitée aux messageries ci-dessous.
iOS : messagerie standard
Android : Gmail via Chrome
Effacement de la mémoire principale (Réinitialisation)
Q Pour effacer toutes les données, sauf les fichiers eActivity
1. Appuyez sur
- [File] - [Reset].
• Une boîte de dialogue contenant le message « Reset Memory? Are your sure? » vous
demande de confirmer l’effacement.
2. Pour effacer la mémoire, appuyez sur [Yes]. Pour annuler l’opération sans rien effacer,
appuyez sur [No].
Génération de données MathML
La fx-CG500 App peut fournir sous forme de fichier MathML (.mml) des expressions algébriques
et du texte saisis dans l’application Principale, l’application eActivity ou d’autres applications. Vous
pouvez aussi copier des expressions algébriques et du texte sous forme de données MathML
(contenu, présentation ou format combiné) dans le presse-papiers.
Q Pour exporter l’expression algébrique sélectionnée dans un fichier MathML
Exemple : Exporter une expression algébrique saisie dans l’application Principale sous forme de
fichier MathML
1. Appuyez sur
- [Application] - [Main] pour démarrer l’application Principale.
2. Entrez l’expression algébrique que vous souhaitez ajouter au fichier MathML.
FR-8
3. Sélectionnez l’expression.
4. Appuyez sur
- [File] - [Export MathML].
5. Tapez le nom de fichier et appuyez sur [Save].
• L’expression sélectionnée à l’étape 3 est enregistrée sous forme de fichier mml.
Q Pour copier l’expression algébrique sélectionnée dans le presse-papiers sous
forme de données MathML
1. Sélectionnez l’expression que vous souhaitez copier.
2. Appuyez sur
- [Edit] - [Copy Special] - [MathML].
3. Appuyez sur l’élément souhaité du sous-menu.
Pour copier des données en utilisant ce type de balisage MathML :
Contenu
• Le balisage de contenu capture la structure mathématique.
Présentation
• Le balisage de présentation capture la structure de la notation.
Combiné
• Utilise si possible le balisage de contenu. Sinon, le balisage de
présentation est utilisé.
Sélectionnez cette
option :
Content
Presentation
Combined
• Veuillez consulter Internet ou d’autres publications pour le détail complet sur le balisage de
contenu MathML et le balisage de présentation.
Copie d’expressions algébriques et de texte sous forme
de texte Unicode
Vous pouvez copier de la façon suivante du texte ou des expressions algébriques sélectionnés sur
l’application de la fx-CG500 dans le presse-papiers sous forme de texte Unicode.
Q Pour copier des expressions algébriques ou du texte sous forme de texte Unicode
1. Sélectionnez l’expression ou le texte que vous souhaitez copier.
2. Appuyez sur
- [Edit] - [Copy Special] - [Unicode].
• L’expression ou le texte sélectionné est copié dans le presse-papiers sous forme de texte Unicode.
• Vous pouvez coller le texte copié dans n’importe quelle autre application avec éditeur de texte.
FR-9
Écran d’informations
Appuyer sur le bouton d’informations (
) affiche un écran comme celui indiqué ci-dessous.
Ferme l’écran
d’informations.
Pour faire ceci :
Sélectionnez ceci :
Manuels utilisateur
Ouvrir le manuel de la fx-CG500
fx-CG500 Manual
Ouvrir le manuel de la fx-CG500 App
fx-CG500 App Manual
À propos de l’app
Afficher la version de la fx-CG500 App et
d’autres informations
Version
Afficher des informations concernant les
conditions d’utilisation
Terms of Use
Afficher des informations concernant la politique Privacy Policy
de confidentialité
Afficher des informations concernant la licence
OSS
OSS License
Abonnement
Afficher l’écran Adhésion
Membership
Compte ClassPad.net
Afficher l’écran de connexion
Log in
Assistance
Afficher la FAQ de la fx-CG500 App
Help
Démarrer votre navigateur et aller sur le CASIO CASIO WorldWide Education Website
WorldWide Education Website
FR-10
Informations (Android uniquement)
Configurer les réglages de Google Analytics*
Auto send usage information
* Pour iOS, sélectionnez l’application « Réglages » sur l’écran d’accueil, puis configurez les
réglages « Envoi automatique des informations d’utilisation ».
Q Fonction Connexion
Appuyer sur [Log in] sur l’écran d’informations permet d’afficher un écran comme celui affiché cidessous.
(1)
(2)
(1) Après avoir saisi les informations de votre compte ClassPad.net (adresse e-mail et mot de
passe), appuyez sur [Log in]. Cela appliquera le statut de votre abonnement fx-CG500 App à
votre compte ClassPad.net.
• Vous pourrez utiliser les fonctions du programme ClassPad.net PLUS dès votre première
connexion à un compte ClassPad.net après avoir souscrit à l’abonnement avec la fx-CG500
App.
(2) Si vous vous êtes déjà connecté à ClassPad.net à l’aide de votre compte Google ou Microsoft,
vous pourrez vous connecter à ClassPad.net en appuyant sur [Google] (pour un compte
Google) ou [Microsoft] (pour un compte Microsoft) sous « Log In Using ». Après avoir saisi
les informations de votre compte ClassPad.net (adresse e-mail et mot de passe) pour vous
connecter à la fx-CG500 App, vous pouvez associer votre compte ClassPad.net à votre compte
Google ou compte Microsoft en appuyant sur le bouton correspondant.
FR-11
Commandes du menu tiroir
Pour faire ceci :
Sélectionnez cet élément de menu :
Créer un nouveau fichier vcp
File
New
Ouvrir un fichier vcp existant
Open
Enregistrer les modifications dans le
fichier vcp actuel
Save
Enregistrer le fichier vcp actuel sous
un nouveau nom
Save As
Joindre un fichier vcp à un e-mail
Send
Effacer la mémoire principale
Reset
Exporter des expressions
mathématiques et du texte
sélectionnés dans un fichier mml
Export MathML
Rouvrir un des quatre fichiers ouverts
le plus récemment
1 <nom du fichier>
2 <nom du fichier>
3 <nom du fichier>
Copier l’expression mathématique
sélectionnée avec un balisage de
contenu
Edit
Copy Special
MathML Content
Copier l’expression mathématique
sélectionnée avec un balisage de
présentation
Presentation
Copier l’expression mathématique
sélectionnée avec un balisage de
contenu et de présentation combiné
Combined
Copier le texte sélectionné en
Unicode
Unicode
Coller du texte copié dans le pressepapiers
Paste Special
Enregistrer une capture d’écran de
l’écran de la fx-CG500 virtuelle
Capture Screen
Enregistrer une capture d’écran du
panneau actif actuel
Capture Current Panel
Lancer une application
Applications Applicable menu item
Passer en mode calculatrice*1
Window
Passer en mode mobile*2
Calculator Mode
Mobile Mode
*1 Mode mobile uniquement *2 Mode calculatrice uniquement
FR-12
Expat, Release 1.95.8 (MIT/X license)
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
Copyright © 2001, 2002, 2003 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the “Software”), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is furnished to do so, subject
to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial
portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Cocoa Platform Plugin
Copyright (C) 2007-2008, Apple, Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials provided with the
distribution.
Neither the name of Apple, Inc. nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The qtmain Library
Copyright (C) 2015 The Qt Company Ltd.
Contact: http://www.qt.io/licensing/
You may use this file under the terms of the BSD license as follows:
“Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met: * Redistributions of source code must retain the
above copyright notice, this list of conditions and the following disclaimer. * Redistributions in
binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution. * Neither the
name of The Qt Company Ltd nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.”
Shift-JIS Text Codec
Shift JIS (Shift Japanese Industrial Standards, also SJIS, MIME name Shift_JIS) is a character
encoding for Japanese. It was originally developed by ASCII Corporation in conjunction with
Microsoft.
Copyright (C) 1999 Serika Kurusugawa. All rights reserved. Redistribution and use in source and
binary forms, with or without modifica- tion, are permitted provided that the following conditions
are met: 1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY
THE AUTHOR AND CONTRIBUTORS “AS IS”. ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ISO 2022-JP (JIS) Text Codec
ISO/IEC 2022 is an ISO standard specifying: - a technique for including multiple character sets in a
single character encoding system, and - a technique for representing these character sets in both 7
and 8 bit systems using the same encoding.
ISO-2022-JP is a widely used encoding for Japanese.
Copyright (C) 1999 Serika Kurusugawa. All rights reserved. Redistribution and use in source and
binary forms, with or without modifica- tion, are permitted provided that the following conditions
are met: 1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY
THE AUTHOR AND CONTRIBUTORS “AS IS”. ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Unicode
Copyright (c) 1991-2009 Unicode, Inc. All rights reserved. Distributed under the Terms of Use in
http://www.unicode.org/copyright.html.
Permission is hereby granted, free of charge, to any person obtaining a copy of the Unicode data
files and any associated documentation (the “Data Files”) or Unicode software and any associated
documentation (the “Software”) to deal in the Data Files or Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of
the Data Files or Software, and to permit persons to whom the Data Files or Software are furnished
to do so, provided that (a) the above copyright notice(s) and this permission notice appear with all
copies of the Data Files or Software, (b) both the above copyright notice(s) and this permission
notice appear in associated documentation, and (c) there is clear notice in each modified Data File
or in the Software as well as in the documentation associated with the Data File(s) or Software that
the data or software has been modified.
THE DATA FILES AND SOFTWARE ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR
CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THE DATA FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising
or otherwise to promote the sale, use or other dealings in these Data Files or Software without prior
written authorization of the copyright holder.
Included in util/unicode/data, tests/auto/qtextboundaryfinder/data and tests/auto/qchar
Parts of the makeqpf tool
Macros for building Qt files
Copyright 2005-2011 Kitware, Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials provided with the
distribution.
* Neither the name of Kitware, Inc. nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
qtbase/src/corelib/Qt5CoreMacros.cmake
qtbase/src/dbus/Qt5DBusMacros.cmake
qtbase/src/widgets/Qt5WidgetsMacros.cmake
qttools/src/linguist/Qt5LinguistToolsMacros.cmake
Android GNU C++ Run-time Licensing
The Android platform does not provide a full implementation of the C++ run-time. Instead, apps that
depend on features such as STL, exceptions, or RTTI, must include an additional native run-time
library that provides the features they need.
Qt will by default use the GNU libstdc++ library which is distributed as part of the Google Android
NDK. Qt Creator will copy this library into the .APK for any Qt-based Android app. The library will
then be loaded by the app on start-up to meet the run-time requirements of Qt.
The GNU C++ run-time is licensed under the GNU General Public License version 3 with an
exception which grants permission for run-time linking and usage of the library by an application
which would otherwise violate the terms of the main license. For more information about this
exception, see the official license page.
QImage
Copyright (C) 2004, 2005 Daniel M. Duley
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials provided with the
distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS’’ AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
PNG Reference Library (libpng) version 1.6.17
This copy of the libpng notices is provided for your convenience. In case of any discrepancy
between this copy and the notices in the file png.h that is included in the libpng distribution, the
latter shall prevail.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately following this sentence.
This code is released under the libpng license.
libpng versions 1.2.6, August 15, 2004, through 1.6.17, March 26, 2015, are Copyright (c) 2004,
2006-2015 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and
license as libpng-1.2.5 with the following individual added to the list of Contributing Authors
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002
Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as
libpng-1.0.6 with the following individuals added to the list of Contributing Authors
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the library or against infringement.
There is no warranty that our efforts or the library will fulfill any of your particular purposes or
needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance,
accuracy, and effort is with the user.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999
Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as
libpng-0.96, with the following individuals added to the list of Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas
Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following
individuals added to the list of Contributing Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric
Schalnat, Group 42, Inc.
For the purposes of this copyright and license, “Contributing Authors” is defined as the following set
of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc.
disclaim all warranties, expressed or implied, including, without limitation, the warranties of
merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc.
assume no liability for direct, indirect, incidental, special, exemplary, or consequential damages,
which may result from the use of the PNG Reference Library, even if advised of the possibility of
such damage.
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions
hereof, for any purpose, without fee, subject to the following restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not be misrepresented as being the
original source.
3. This Copyright notice may not be removed or altered from any source or altered source
distribution.
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the
use of this source code as a component to supporting the PNG file format in commercial products.
If you use this source code in a product, acknowledgment is not required but would be appreciated.
A “png_get_copyright” function is available, for convenient use in “about” boxes and the like:
printf(“%s”,png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of course) is supplied in the files “pngbar.png” and “pngbar.jpg
(88x31) and “pngnow.png” (98x31).
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of
the Open Source Initiative.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
March 26, 2015
Pixman (pixman) version 0.17.11
Copyright © 2009 Nokia Corporation
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the “Software”), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is furnished to do so, subject
to the following conditions:
The above copyright notice and this permission notice (including the next paragraph) shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
Author: Siarhei Siamashka (siarhei.siamashka@nokia.com)
Drag and Drop
Copyright 1996 Daniel Dardailler. Permission to use, copy, modify, distribute, and sell this software
for any purpose is hereby granted without fee, provided that the above copyright notice appear
in all copies and that both that copyright notice and this permission notice appear in supporting
documentation, and that the name of Daniel Dardailler not be used in advertising or publicity
pertaining to distribution of the software without specific, written prior permission. Daniel Dardailler
makes no representations about the suitability of this software for any purpose. It is provided “as
is” without express or implied warranty. Modifications Copyright 1999 Matt Koss, under the same
license as above.
ANGLE (angle)
Copyright (c) 2002, NVIDIA Corporation.
NVIDIA Corporation(“NVIDIA”) supplies this software to you in consideration of your agreement to
the following terms, and your use, installation, modification or redistribution of this NVIDIA software
constitutes acceptance of these terms. If you do not agree with these terms, please do not use,
install, modify or redistribute this NVIDIA software.
In consideration of your agreement to abide by the following terms, and subject to these terms,
NVIDIA grants you a personal, non-exclusive license, under NVIDIA’s copyrights in this original
NVIDIA software (the “NVIDIA Software”), to use, reproduce, modify and redistribute the NVIDIA
Software, with or without modifications, in source and/or binary forms; provided that if you
redistribute the NVIDIA Software, you must retain the copyright notice of NVIDIA, this notice and
the following text and disclaimers in all such redistributions of the NVIDIA Software. Neither the
name, trademarks, service marks nor logos of NVIDIA Corporation may be used to endorse or
promote products derived from the NVIDIA Software without specific prior written permission from
NVIDIA. Except as expressly stated in this notice, no other rights or licenses express or implied,
are granted by NVIDIA herein, including but not limited to any patent rights that may be infringed
by your derivative works or by other works in which the NVIDIA Software may be incorporated. No
hardware is licensed hereunder.
THE NVIDIA SOFTWARE IS BEING PROVIDED ON AN “AS IS” BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ITS USE AND
OPERATION EITHER ALONE OR IN COMBINATION WITH OTHER PRODUCTS.
IN NO EVENT SHALL NVIDIA BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL,
EXEMPLARY, CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST
PROFITS; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) OR ARISING IN ANY WAY OUT OF THE USE,
REPRODUCTION, MODIFICATION AND/OR DISTRIBUTION OF THE NVIDIA SOFTWARE,
HOWEVER CAUSED AND WHETHER UNDER THEORY OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, EVEN IF NVIDIA HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
Parts of ANGLE in qtbase/src/3rdparty/angle/src/compiler/preprocessor
Copyright (C) 2002-2010 The ANGLE Project Authors. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of TransGaming Inc., Google Inc., 3DLabs Inc. Ltd., nor the names of their
contributors may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The ANGLE project in qtbase/src/3rdparty/angle
Easing Equations
Easing Equations is a collection of swappable functions that add flavor to motion.
Disclaimer for Robert Penner’s Easing Equations license:
TERMS OF USE - EASING EQUATIONS
Open source under the BSD License.
Copyright © 2001 Robert Penner All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution. * Neither the name of the author nor the names of contributors may
be used to endorse or promote products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -- quoted from
qtbase/src/3rdparty/easing/easing.cpp
OpenGL ES 2.0 Headers
Copyright (c) 2013 The Khronos Group Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and/
or associated documentation files (the “Materials”), to deal in the Materials without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Materials, and to permit persons to whom the Materials are furnished to do
so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial
portions of the Materials.
THE MATERIALS ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE MATERIALS OR THE USE OR
OTHER DEALINGS IN THE MATERIALS.
This document is licensed under the SGI Free Software B License Version 2.0. For details, see
http://oss.sgi.com/projects/FreeB/ .
OpenGL ES 3.1 Headers
Copyright (c) 2013-2014 The Khronos Group Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and/
or associated documentation files (the “Materials”), to deal in the Materials without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Materials, and to permit persons to whom the Materials are furnished to do
so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial
portions of the Materials.
THE MATERIALS ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE MATERIALS OR THE USE OR
OTHER DEALINGS IN THE MATERIALS.
This document is licensed under the SGI Free Software B License Version 2.0. For details, see
http://oss.sgi.com/projects/FreeB/ .
JavaScriptCore Macro Assembler
Copyright (C) 2012 Apple Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials provided with the
distribution.
THIS SOFTWARE IS PROVIDED BY APPLE INC. ``AS IS’’ AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL APPLE INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
LICENSE ISSUES
==============
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License
and the original SSLeay license apply to the toolkit.
See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses.
In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
OpenSSL License
------------------------/* =========================================================================
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*/
Copyright (C) 1998-2016 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or
promote products derived from this software without prior written permission. For written
permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL"
appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
========================================================================
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This
product includes software written by Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License
---------------------------------/*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*/
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions
are aheared to. The following conditions apply to all code found in this distribution, be it the
RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with
this distribution is covered by the same copyright terms except that the holder is Tim Hudson
(tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be
removed.
If this package is used in a product, Eric Young should be given attribution as the author of the
parts of the library used.
This can be in the form of a textual message at program startup or in documentation (online or
textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement:
"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"
The word 'cryptographic' can be left out if the rouines from the library being used are not
cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory
(application code) you must include an acknowledgement: "This product includes software
written by Tim Hudson (tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code
cannot be changed. i.e. this code cannot simply be copied and put under another distribution
licence [including the GNU Public Licence.]
The following software is included in this product: Android Support Library v4. This software
contains the following license and notice below:
Copyright (c) 2005-2013, The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the “License”);
you may not use this file except in compliance with the License.
Unless required by applicable law or agreed to in writing, software distributed under the License
is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
either express or implied. See the License for the specific language governing permissions and
limitations under the License.
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
“License” shall mean the terms and conditions for use, reproduction, and distribution as defined
by Sections 1 through 9 of this document.
“Licensor” shall mean the copyright owner or entity authorized by the copyright owner that is
granting the License.
“Legal Entity” shall mean the union of the acting entity and all other entities that control, are
controlled by, or are under common control with that entity. For the purposes of this definition,
“control” means (i) the power, direct or indirect, to cause the direction or management of such
entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.
“You” (or “Your”) shall mean an individual or Legal Entity exercising permissions granted by this
License.
“Source” form shall mean the preferred form for making modifications, including but not limited to
software source code, documentation source, and configuration files.
“Object” form shall mean any form resulting from mechanical transformation or translation of a
Source form, including but not limited to compiled object code, generated documentation, and
conversions to other media types.
“Work” shall mean the work of authorship, whether in Source or Object form, made available
under the License, as indicated by a copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).
“Derivative Works” shall mean any work, whether in Source or Object form, that is based on (or
derived from) the Work and for which the editorial revisions, annotations, elaborations, or other
modifications represent, as a whole, an original work of authorship. For the purposes of this
License, Derivative Works shall not include works that remain separable from, or merely link (or
bind by name) to the interfaces of, the Work and Derivative Works thereof.
“Contribution” shall mean any work of authorship, including the original version of the Work
and any modifications or additions to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or
Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this
definition, “submitted” means any form of electronic, verbal, or written communication sent to
the Licensor or its representatives, including but not limited to communication on electronic
mailing lists, source code control systems, and issue tracking systems that are managed by, or
on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding
communication that is conspicuously marked or otherwise designated in writing by the copyright
owner as “Not a Contribution.”
“Contributor” shall mean Licensor and any individual or Legal Entity on behalf of whom a
Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform,
sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made, use, offer to sell, sell,
import, and otherwise transfer the Work, where such license applies only to those patent claims
licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by
combination of their Contribution(s) with the Work to which such Contribution(s) was submitted.
If You institute patent litigation against any entity (including a cross-claim or counterclaim in a
lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct
or contributory patent infringement, then any patent licenses granted to You under this License
for that Work shall terminate as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof
in any medium, with or without modifications, and in Source or Object form, provided that You
meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy of this License;
and
(b) You must cause any modified files to carry prominent notices stating that You changed the
files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright,
patent, trademark, and attribution notices from the Source form of the Work, excluding those
notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a “NOTICE” text file as part of its distribution, then any Derivative Works
that You distribute must include a readable copy of the attribution notices contained within such
NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in
at least one of the following places: within a NOTICE text file distributed as part of the Derivative
Works; within the Source form or documentation, if provided along with the Derivative Works;
or, within a display generated by the Derivative Works, if and wherever such third-party notices
normally appear. The contents of the NOTICE file are for informational purposes only and do
not modify the License. You may add Your own attribution notices within Derivative Works that
You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that
such additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or
different license terms and conditions for use, reproduction, or distribution of Your modifications,
or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of
the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally
submitted for inclusion in the Work by You to the Licensor shall be under the terms and
conditions of this License, without any additional terms or conditions. Notwithstanding the above,
nothing herein shall supersede or modify the terms of any separate license agreement you may
have executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks,
service marks, or product names of the Licensor, except as required for reasonable and
customary use in describing the origin of the Work and reproducing the content of the NOTICE
file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor
provides the Work (and each Contributor provides its Contributions) on an “AS IS” BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT,
MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible
for determining the appropriateness of using or redistributing the Work and assume any risks
associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including
negligence), contract, or otherwise, unless required by applicable law (such as deliberate and
grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages,
including any direct, indirect, special, incidental, or consequential damages of any character
arising as a result of this License or out of the use or inability to use the Work (including but not
limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any
and all other commercial damages or losses), even if such Contributor has been advised of the
possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works
thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty,
indemnity, or other liability obligations and/or rights consistent with this License. However,
in accepting such obligations, You may act only on Your own behalf and on Your sole
responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend,
and hold each Contributor harmless for any liability incurred by, or claims asserted against, such
Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
The following software is included in this product: Android Support Library Customtabs. This
software contains the following license and notice below:
Copyright (c) 2005-2013, The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in
compliance with the License.
Unless required by applicable law or agreed to in writing, software distributed under the License
is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
either express or implied. See the License for the specific language governing permissions and
limitations under the License.
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
“License” shall mean the terms and conditions for use, reproduction, and distribution as defined
by Sections 1 through 9 of this document.
“Licensor” shall mean the copyright owner or entity authorized by the copyright owner that is
granting the License.
“Legal Entity” shall mean the union of the acting entity and all other entities that control, are
controlled by, or are under common control with that entity. For the purposes of this definition,
“control” means (i) the power, direct or indirect, to cause the direction or management of such
entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.
“You” (or “Your”) shall mean an individual or Legal Entity exercising permissions granted by this
License.
“Source” form shall mean the preferred form for making modifications, including but not limited to
software source code, documentation source, and configuration files.
“Object” form shall mean any form resulting from mechanical transformation or translation of a
Source form, including but not limited to compiled object code, generated documentation, and
conversions to other media types.
“Work” shall mean the work of authorship, whether in Source or Object form, made available
under the License, as indicated by a copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).
“Derivative Works” shall mean any work, whether in Source or Object form, that is based on (or
derived from) the Work and for which the editorial revisions, annotations, elaborations, or other
modifications represent, as a whole, an original work of authorship. For the purposes of this
License, Derivative Works shall not include works that remain separable from, or merely link (or
bind by name) to the interfaces of, the Work and Derivative Works thereof.
“Contribution” shall mean any work of authorship, including the original version of the Work
and any modifications or additions to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or
Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this
definition, “submitted” means any form of electronic, verbal, or written communication sent to
the Licensor or its representatives, including but not limited to communication on electronic
mailing lists, source code control systems, and issue tracking systems that are managed by, or
on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding
communication that is conspicuously marked or otherwise designated in writing by the copyright
owner as “Not a Contribution.”
“Contributor” shall mean Licensor and any individual or Legal Entity on behalf of whom a
Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform,
sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made, use, offer to sell, sell,
import, and otherwise transfer the Work, where such license applies only to those patent claims
licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by
combination of their Contribution(s) with the Work to which such Contribution(s) was submitted.
If You institute patent litigation against any entity (including a cross-claim or counterclaim in a
lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct
or contributory patent infringement, then any patent licenses granted to You under this License
for that Work shall terminate as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof
in any medium, with or without modifications, and in Source or Object form, provided that You
meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy of this License;
and
(b) You must cause any modified files to carry prominent notices stating that You changed the
files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright,
patent, trademark, and attribution notices from the Source form of the Work, excluding those
notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a “NOTICE” text file as part of its distribution, then any Derivative Works
that You distribute must include a readable copy of the attribution notices contained within such
NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in
at least one of the following places: within a NOTICE text file distributed as part of the Derivative
Works; within the Source form or documentation, if provided along with the Derivative Works;
or, within a display generated by the Derivative Works, if and wherever such third-party notices
normally appear. The contents of the NOTICE file are for informational purposes only and do
not modify the License. You may add Your own attribution notices within Derivative Works that
You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that
such additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or
different license terms and conditions for use, reproduction, or distribution of Your modifications,
or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of
the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally
submitted for inclusion in the Work by You to the Licensor shall be under the terms and
conditions of this License, without any additional terms or conditions. Notwithstanding the above,
nothing herein shall supersede or modify the terms of any separate license agreement you may
have executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks,
service marks, or product names of the Licensor, except as required for reasonable and
customary use in describing the origin of the Work and reproducing the content of the NOTICE
file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor
provides the Work (and each Contributor provides its Contributions) on an “AS IS” BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT,
MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible
for determining the appropriateness of using or redistributing the Work and assume any risks
associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including
negligence), contract, or otherwise, unless required by applicable law (such as deliberate and
grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages,
including any direct, indirect, special, incidental, or consequential damages of any character
arising as a result of this License or out of the use or inability to use the Work (including but not
limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any
and all other commercial damages or losses), even if such Contributor has been advised of the
possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works
thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty,
indemnity, or other liability obligations and/or rights consistent with this License. However,
in accepting such obligations, You may act only on Your own behalf and on Your sole
responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend,
and hold each Contributor harmless for any liability incurred by, or claims asserted against, such
Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
SA1810-B
© 2017 CASIO COMPUTER CO., LTD.
Download PDF

advertising