AV Receiver Owner's Manual • This unit is a product for enjoying video and music at home. • This manual explains preparations and operations for everyday users of the unit. • Read the supplied booklet “Quick Start Guide” before using the unit. EN CONTENTS BEFORE USING THE UNIT 8 3 Connecting playback devices.......................................................... 30 HDMI connection with a video device such as a BD/DVD player......................................................................... 30 How to use this manual............................................................................ 8 Connection other than HDMI with a playback device............................................................................................. 30 How to use this manual......................................................................................................................................................... 8 Connecting to the jack on the front panel................................................................................................................... 32 4 Checking the accessories.......................................................................... 8 5 Using the remote control......................................................................... 8 Preparing for connecting to a network......................................................................................................................... 33 Operating range of the remote control........................................................................................................................... 8 Connecting a network cable (wired connection)...................................................................................................... 33 Preparing wireless antennas (wireless connection).................................................................................................. 34 9 6 Connecting a device compatible with the trigger function.................................................................................. 35 Part names and functions...................................................................... 11 7 Part names and functions of the front panel............................................................................................................... 11 Plugging in the power cable............................................................ 35 Plugging in the power cable............................................................................................................................................. 35 Part names and functions of the front display............................................................................................................ 13 8 Part names and functions of the rear panel................................................................................................................. 14 Selecting the on-screen menu language........................................ 36 Selecting the on-screen menu language...................................................................................................................... 36 Part names and functions of the remote control....................................................................................................... 15 PREPARATIONS Connecting other devices................................................................ 34 Connecting an external power amplifier...................................................................................................................... 34 What you can do with the unit................................................................. 9 9 16 Configuring the necessary speaker settings.................................. 37 Assigning speaker configuration..................................................................................................................................... 37 Optimizing the speaker settings automatically (YPAO).......................................................................................... 38 Connecting speakers........................................................................ 16 Checking the YPAO measurement results.................................................................................................................... 40 Names and functions of speakers.................................................................................................................................... 16 Reloading the previous YPAO adjustments................................................................................................................. 41 Speaker systems and speakers to be connected....................................................................................................... 17 Error messages from YPAO................................................................................................................................................ 42 Speaker requirements.......................................................................................................................................................... 17 Warning messages from YPAO......................................................................................................................................... 43 Setting the speaker impedance....................................................................................................................................... 18 10 Setting MusicCast............................................................................. 44 Cable requirements.............................................................................................................................................................. 18 What is MusicCast.................................................................................................................................................................. 44 How to connect speakers................................................................................................................................................... 18 Using MusicCast CONTROLLER......................................................................................................................................... 44 How to place speakers (speaker systems).................................................................................................................... 20 Adding the unit to the MusicCast network.................................................................................................................. 44 Advanced speaker systems................................................................................................................................................ 26 2 Preparing for connecting to a network........................................... 33 Insert the batteries in the remote control....................................................................................................................... 8 FEATURES 1 Connecting the FM/AM antennas.................................................... 32 Connecting the FM/AM antennas................................................................................................................................... 32 Checking the accessories...................................................................................................................................................... 8 Connecting a TV................................................................................ 29 HDMI connection with a TV............................................................................................................................................... 29 HDMI connection with another TV or a projector..................................................................................................... 29 2 En ENJOYING SOUND 45 Listening to FM/AM radio....................................................................... 60 Enjoying sound field effects.................................................................. 45 Selecting a frequency for reception............................................................................................................................... 61 Select your favorite sound mode..................................................................................................................................... 45 Selecting a preset station................................................................................................................................................... 62 Enjoying 3D sound fields (CINEMA DSP 3D)................................................................................................................ 45 Registering FM radio stations automatically (FM Auto Preset)............................................................................. 62 Enjoying sound field effects optimized for the type of content........................................................................... 46 Registering a radio station manually.............................................................................................................................. 63 Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)............................................ 46 Clearing preset stations....................................................................................................................................................... 64 Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT).................................... 46 Clearing all preset stations................................................................................................................................................. 64 Enjoying surround sound with headphones (SILENT CINEMA)............................................................................ 46 Displaying the Radio Data System information......................................................................................................... 65 Enjoying unprocessed playback............................................................ 47 Receiving traffic information automatically................................................................................................................ 65 Setting the frequency steps............................................................................................................................................... 60 Enjoying original sound (straight decode)................................................................................................................... 47 Playing back music stored on a Bluetooth® device.............................. 66 Enjoying multichannel playback without sound field effects (surround decoder)....................................... 47 Playback Bluetooth® device music on the unit........................................................................................................... 66 Enjoying pure high fidelity sound (Pure Direct)......................................................................................................... 48 Playing back music with AirPlay............................................................ 67 Enjoying enhanced bass sound............................................................. 49 Playback of iTunes/iPhone music contents with AirPlay........................................................................................ 67 Enhancing the bass (Extra Bass)....................................................................................................................................... 49 Playing back music stored on a USB storage device............................ 68 Enjoying enhanced compressed music................................................. 49 Playback of USB storage device contents..................................................................................................................... 68 Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)......... 49 Playing back music stored on media servers (PCs/NAS)...................... 69 Enjoying Dolby Atmos® and DTS:X™..................................................... 50 Media sharing setup on media servers (PCs/NAS)..................................................................................................... 69 Enjoying Dolby Atmos® and DTS:X™.............................................................................................................................. 50 Playing back music stored on media servers (PCs/NAS)......................................................................................... 69 Enjoying music in multiple rooms......................................................... 51 Listening to Internet radio..................................................................... 71 Playing back music in multiple rooms........................................................................................................................... 51 Selecting an Internet radio station.................................................................................................................................. 71 Connecting Zone2 speakers.............................................................................................................................................. 51 Registering favorite Internet radio stations................................................................................................................. 71 Operating the unit from Zone2 (remote connection).............................................................................................. 53 Listening to music streaming services.................................................. 72 Controlling Zone2................................................................................................................................................................. 54 Listening to a streaming service...................................................................................................................................... 72 Enjoying the same source in multiple rooms (party mode)................................................................................... 55 Useful playback functions...................................................................... 73 PLAYBACK SCENE function....................................................................................................................................................................... 73 56 Shortcut function................................................................................................................................................................... 76 Basic playback procedure...................................................................... 56 Basic procedure for playing back video and music................................................................................................... 56 Selecting an HDMI output jack......................................................................................................................................... 57 Switching information on the front display................................................................................................................. 57 Item names and functions of the playback screen.................................................................................................... 58 Item names and functions of the browse screen....................................................................................................... 59 3 En Configuring playback settings for different playback sources (Option menu)......................................................................................... 78 Configuring the speaker settings.......................................................... 94 Basic operation of the Option menu.............................................................................................................................. 78 Setting the size of the front speakers............................................................................................................................. 94 Option menu items............................................................................................................................................................... 79 Setting the use of a center speaker and its size.......................................................................................................... 95 Adjusting the tone of the audio output........................................................................................................................ 79 Setting the use of surround speakers and their size................................................................................................. 95 Configuring the volume automatically based on the YPAO measurement results...................................... 80 Setting the layout of the surround speakers............................................................................................................... 96 Adjusting the volume or perceive height of dialogue sounds............................................................................. 81 Setting the use of surround back speakers and their size...................................................................................... 96 Adjusting the delay of the Lipsync function................................................................................................................ 82 Setting the use of presence speakers and their size................................................................................................. 97 Setting Compressed Music Enhancer............................................................................................................................ 82 Setting the layout of the presence speakers............................................................................................................... 97 Correcting volume differences during playback........................................................................................................ 82 Setting the crossover frequency of the low-frequency components................................................................. 97 Setting the use of Extra Bass.............................................................................................................................................. 83 Setting the use of a subwoofer......................................................................................................................................... 98 Enabling the video signal processing............................................................................................................................ 83 Setting the phase of the subwoofer............................................................................................................................... 98 Selecting a video source to be output with the selected audio source............................................................ 83 Setting the distance between each speaker and the listening position........................................................... 98 Configuring the shuffle/repeat setting.......................................................................................................................... 84 Adjusting the volume of each speaker.......................................................................................................................... 99 Setting your speaker system............................................................................................................................................. 94 Switching between stereo and monaural for FM radio reception...................................................................... 84 Setting the equalizer............................................................................................................................................................ 99 Setting presets for radio stations..................................................................................................................................... 85 Outputting test tones........................................................................................................................................................ 100 Adding an Internet radio station to the “Favorites” folder..................................................................................... 87 Reloading the previous YPAO adjustments.............................................................................................................. 100 Removing an Internet radio station from the “Favorites” folder.......................................................................... 87 Receiving traffic information automatically................................................................................................................ 87 Checking the current status information...................................................................................................................... 88 CONFIGURATIONS 89 Configuring various functions (Setup menu)....................................... 89 Basic operation of the Setup menu................................................................................................................................ 89 Setup menu items................................................................................................................................................................. 90 4 En Configuring the sound settings........................................................... 101 Configuring the video/HDMI settings................................................. 113 Checking the current audio signal information....................................................................................................... 101 Checking the current video and HDMI signal information.................................................................................. 113 Enabling Lipsync adjustment......................................................................................................................................... 101 Setting the use of the video signal processing........................................................................................................ 113 Setting the adjustment method of the Lipsync function..................................................................................... 102 Setting a resolution to output HDMI video signals................................................................................................ 113 Adjusting the delay of the Lipsync function............................................................................................................. 102 Setting an aspect ratio to output HDMI video signals........................................................................................... 114 Selecting sound programs............................................................................................................................................... 103 Setting the use of HDMI Control.................................................................................................................................... 114 Adjusting the sound field effect level.......................................................................................................................... 104 Setting the audio jack used for TV audio input........................................................................................................ 114 Adjusting the delay between the direct sound and presence sound field generation............................. 104 Setting the use of ARC....................................................................................................................................................... 114 Adjusting the broadening effect of the presence sound field........................................................................... 104 Linking the standby modes of the unit and the TV................................................................................................ 115 Adjusting the loss of the presence sound field........................................................................................................ 105 Setting the output of HDMI audio from the TV speaker....................................................................................... 115 Adjusting the decay time of the rear reverberant sound..................................................................................... 105 Setting the version of HDCP used on the HDMI input jacks................................................................................ 115 Adjusting the delay between the direct sound and reverberant sound generation................................. 105 Setting the use of HDMI Standby Through................................................................................................................ 115 Adjusting the volume of the reverberant sound..................................................................................................... 105 Configuring the network settings....................................................... 116 Adjusting the delay between the direct sound and surround sound field generation............................ 106 Checking the network information on the unit....................................................................................................... 116 Adjusting the broadening effect of the surround sound field........................................................................... 106 Setting the network connection method (Wired/Wireless)................................................................................ 116 Adjusting the loss of the surround sound field........................................................................................................ 106 Setting the network parameters automatically (DHCP)........................................................................................ 116 Adjusting the delay between the direct sound and surround back sound field generation.................. 106 Setting the network parameters manually................................................................................................................ 117 Adjusting the broadening effect of the surround back sound field................................................................. 107 Setting the use of the Network Standby function.................................................................................................. 117 Adjusting the loss of the surround back sound field............................................................................................. 107 Setting the MAC address filter........................................................................................................................................ 118 Selecting the surround decoder used in the program.......................................................................................... 107 Setting the MAC address.................................................................................................................................................. 118 Setting the use of Center Spread.................................................................................................................................. 108 Setting the use of a Digital Media Controller............................................................................................................ 118 Adjusting the center localization (broadening effect) of the front sound field........................................... 108 Setting the use of volume control via AirPlay........................................................................................................... 118 Adjusting the entire volume for “7ch Stereo”........................................................................................................... 108 Setting the network name of the unit......................................................................................................................... 119 Adjusting the front and rear volume balance for “7ch Stereo”.......................................................................... 108 Setting the power interlock from the unit to MusicCast compatible devices.............................................. 119 Adjusting the left and right volume balance for “7ch Stereo”............................................................................ 108 Configuring the Bluetooth® settings.................................................. 120 Adjusting the height volume balance using the presence speakers for “7ch Stereo”............................... 109 Setting the use of Bluetooth®......................................................................................................................................... 120 Setting the use of Monaural Mix for “7ch Stereo”................................................................................................... 109 Terminating the connection between a Bluetooth® device and the unit...................................................... 120 Setting the dynamic range adjustment method..................................................................................................... 109 Setting the use of the Bluetooth® Standby function.............................................................................................. 120 Setting the limit value of the volume.......................................................................................................................... 109 Setting the initial volume for when the unit is turned on.................................................................................... 110 Adjusting the CINEMA DSP 3D effect level automatically.................................................................................... 110 Setting Virtual Surround Back Speaker (VSBS)......................................................................................................... 110 Configuring the scene settings............................................................ 111 Selecting items to be included as the scene assignments................................................................................... 111 Renaming the SCENE name............................................................................................................................................. 112 5 En Configuring the multi zone settings................................................... 121 Configuring the advanced settings (ADVANCED SETUP menu)....... 134 Checking the Zone2 information.................................................................................................................................. 121 Basic operation of the ADVANCED SETUP menu..................................................................................................... 134 Setting the use of volume adjustments for Zone2 output.................................................................................. 121 ADVANCED SETUP menu items..................................................................................................................................... 134 Setting the Zone2 limit value of the volume............................................................................................................ 121 Changing the speaker impedance setting (SP IMP.).............................................................................................. 135 Setting the Zone2 initial volume for when the unit is turned on...................................................................... 122 Selecting the remote control ID (REMOTE ID).......................................................................................................... 135 Adjusting the time deviation in relation to the main zone.................................................................................. 122 Changing the FM/AM tuning frequency setting (TU)............................................................................................ 135 Switching between stereo and monaural for Zone2 output.............................................................................. 122 Switching the video signal type (TV FORMAT)......................................................................................................... 135 Setting the use of Compressed Music Enhancer for Zone2 output.................................................................. 123 Removing the limitation on HDMI video output (MON.CHK)............................................................................. 136 Adjusting the tone for Zone2 output.......................................................................................................................... 123 Selecting the HDMI 4K signal format (4K MODE).................................................................................................... 136 Setting the use of Extra Bass for Zone2 output........................................................................................................ 123 Setting DTS Format Notification (DTS MODE).......................................................................................................... 137 Adjusting the volume balance for Zone2 output.................................................................................................... 123 Backuping and restoring all the settings (BKUP/RSTR)......................................................................................... 137 Renaming the zone name................................................................................................................................................ 124 Restoring the default settings (INIT)............................................................................................................................. 138 Setting the use of switching to the party mode on Zone2.................................................................................. 124 Updating the firmware (UPDATE)................................................................................................................................. 138 Configuring the system settings......................................................... 125 Checking the firmware version (VERSION)................................................................................................................. 138 Checking the system information on the unit.......................................................................................................... 125 TROUBLESHOOTING Setting the on-screen menu language....................................................................................................................... 125 Combining audio of another input source with video of the current input source................................... 126 139 Setting input sources to be skipped when operating the INPUT key.............................................................. 127 When any problem appears................................................................. 139 Automatically changing the input source names displayed on the front display...................................... 128 If trouble occurs, first check the following:................................................................................................................ 139 Manually changing the input source names displayed on the front display................................................ 128 Power, system, or remote control trouble................................................................................................................. 139 Setting the use of Auto Play function.......................................................................................................................... 129 Audio trouble....................................................................................................................................................................... 141 Setting sound programs to skip when operating the PROGRAM key............................................................. 129 Video trouble........................................................................................................................................................................ 144 Setting the function for the PROGRAM key on the remote control................................................................. 129 FM/AM radio trouble......................................................................................................................................................... 145 Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.................. 130 USB trouble........................................................................................................................................................................... 145 Adjusting the brightness of the front display........................................................................................................... 130 Network trouble.................................................................................................................................................................. 146 Setting the scale of the volume display...................................................................................................................... 130 Bluetooth® trouble.............................................................................................................................................................. 148 Setting the use of short messages on the TV............................................................................................................ 130 Error indications on the front display................................................. 149 Setting the image to be used as wallpaper on the TV........................................................................................... 130 Error indications on the front display.......................................................................................................................... 149 Specifying the condition for the TRIGGER OUT jack to function....................................................................... 131 APPENDIX Specifying the output level of the electronic signal transmitted with each input..................................... 131 Switching the output level for electronic signal transmission manually........................................................ 131 151 Updating the unit’s firmware via the network................................... 151 Specifying the zone with which the TRIGGER OUT jack functions are synchronized................................ 131 Setting the amount of time for the auto-standby function................................................................................. 132 Firmware updates............................................................................................................................................................... 151 Setting the use of the eco mode................................................................................................................................... 132 Updating the unit’s firmware via the network......................................................................................................... 152 Preventing accidental changes to the settings........................................................................................................ 132 Updating the firmware via the network..................................................................................................................... 133 6 En Connecting to a network wirelessly.................................................... 153 Default settings.................................................................................... 178 Selecting a wireless network connection method.................................................................................................. 153 Default settings of the Option menu........................................................................................................................... 178 Setting up a wireless connection using the WPS button..................................................................................... 154 Default settings of the Setup menu............................................................................................................................. 178 Setting up a wireless connection using an iOS device.......................................................................................... 154 Default settings of the ADVANCED SETUP menu.................................................................................................... 180 Setting up a wireless connection by selecting from the list of available access points............................ 156 Setting up a wireless connection manually............................................................................................................... 157 Setting up a wireless connection by using the WPS PIN code........................................................................... 159 Input/output jacks and cables............................................................. 160 Video/audio jacks................................................................................................................................................................ 160 Video jacks............................................................................................................................................................................. 160 Audio jacks............................................................................................................................................................................ 161 Using presence speakers...................................................................... 162 Presence speaker layout................................................................................................................................................... 162 Installing the presence speakers in Front Height position.................................................................................. 162 Installing the presence speakers in Overhead position........................................................................................ 162 Using Dolby Enabled speakers as the presence speakers.................................................................................... 163 Glossary................................................................................................. 164 Glossary of audio information........................................................................................................................................ 164 Glossary of HDMI and video information................................................................................................................... 165 Glossary of network information................................................................................................................................... 166 Glossary of Yamaha technologies................................................................................................................................. 166 Supported devices and file formats.................................................... 167 Supported Bluetooth® devices....................................................................................................................................... 167 Supported USB devices..................................................................................................................................................... 167 Supported AirPlay devices............................................................................................................................................... 167 Supported file formats...................................................................................................................................................... 168 Video signal flow.................................................................................. 168 Video signal flow................................................................................................................................................................. 168 Video conversion table..................................................................................................................................................... 169 Additional information on HDMI......................................................... 170 HDMI Control and synchronized operations............................................................................................................ 170 Audio Return Channel (ARC)........................................................................................................................................... 171 HDMI signal compatibility............................................................................................................................................... 172 Trademarks........................................................................................... 173 Trademarks............................................................................................................................................................................ 173 Specifications........................................................................................ 174 Specifications........................................................................................................................................................................ 174 7 En BEFORE USING THE UNIT How to use this manual Checking the accessories Using the remote control How to use this manual Checking the accessories When reading this manual, mind the following items. Check that the following accessories are supplied with the product. Insert the batteries in the remote control • Some features are not available in certain regions. • Due to product improvements, specifications and appearance are subject to change without notice. £ AM antenna Insert the batteries the right way round. £ FM antenna • This manual mainly explains operations using the menu displayed on the TV screen. Operations with the TV screen menu are only available when your TV is connected to the unit via HDMI. • This manual explains operations using the supplied remote control. Operating range of the remote control • This manual describes all the “iPod touch”, “iPhone” and “iPad” as the “iPhone”. “iPhone” refers to “iPod touch”, “iPhone” and “iPad”, unless otherwise specified. * One of the above is supplied depending on the region of purchase. Warning: Indicates precautions for the possibility of death or serious injury. £ YPAO microphone £ Remote control £ Batteries (AAA, R03, UM-4) (x2) Caution: £ Quick Start Guide Indicates precautions for the possibility of minor or moderate injury. Notice: Indicates precautions for use to avoid the possibility of malfunction/damage to the unit. Note: Point the remote control at the remote control sensor on the unit and remain within the operating range shown in the following figure. Note Access the Yamaha Downloads site to download the latest Owner's Manual and Quick Start Guide. http://download.yamaha.com/ Indicates instructions and supplementary explanations for optimum use. 8 En Within 6 m (20 ft) 30° 30° FEATURES What you can do with the unit Supporting 2- to 7.1-channel speaker system Enjoying sound field effects with much presence Wide variety of supported content via network According to the number of speakers that you are using, you can enjoy your favorite acoustic spaces in various styles. The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). When the unit is connected to a network, you can enjoy the various kinds of content via network on the unit. • “Enjoying 3D sound fields (CINEMA DSP 3D)” (p.45) • “Playing back music stored on media servers (PCs/ NAS)” (p.69) • “Using 7.1/5.1.2-channel system” (p.20) • “Using 5.1.2-channel system” (p.21) • “Using 7.1-channel system” (p.22) • “Using 5.1-channel system” (p.23) • “Using 3.1.2-channel system” (p.24) • “Using Virtual CINEMA FRONT” (p.25) • “Playing back music in multiple rooms” (p.51) Automatically optimizing the speaker settings (YPAO) YPAO function detects speaker connections, measures the distances from them to your listening position by using YPAO microphone measurement, and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room (YPAO: Yamaha Parametric room Acoustic Optimizer). • “Optimizing the speaker settings automatically (YPAO)” (p.38) • “Enjoying sound field effects optimized for the type of content” (p.46) • “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.46) • “Enjoying surround sound with headphones (SILENT CINEMA)” (p.46) • “Enjoying original sound (straight decode)” (p.47) • “Enjoying multichannel playback without sound field effects (surround decoder)” (p.47) • “Enjoying pure high fidelity sound (Pure Direct)” (p.48) • “Enhancing the bass (Extra Bass)” (p.49) • “Playback of iTunes/iPhone music contents with AirPlay” (p.67) • “Selecting an Internet radio station” (p.71) • “Listening to a streaming service” (p.72) Playing back content of various devices A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), Bluetooth devices (such as smartphones), game consoles, USB storage devices, and other devices. You can play back content of them. • “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.49) • “Selecting a frequency for reception” (p.61) • “Enjoying Dolby Atmos® and DTS:X™” (p.50) • “Playback of USB storage device contents” (p.68) 9 En • “Playback Bluetooth® device music on the unit” (p.66) Useful functions The unit is equipped with the various useful functions. The SCENE function allows you to select the input source and settings registered to the corresponding scene, such as sound program and Compressed Music Enhancer on/off, with just one touch. When the unit is connected to an HDMI Control-compatible TV with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. • “Selecting the input source and favorite settings with one touch (SCENE)” (p.73) • “Registering a favorite content as shortcut” (p.76) • “HDMI Control and synchronized operations” (p.170) • “Audio Return Channel (ARC)” (p.171) Useful applications Application: “AV SETUP GUIDE” AV SETUP GUIDE is an application that assists you with cable connections between AV Receiver and playback devices as well as AV Receiver setup. This app guides you through the various settings such as speaker connections, TV and playback device connections and selecting the speaker system. For details, search for “AV SETUP GUIDE” on the App Store or Google Play. Application: “AV CONTROLLER” AV CONTROLLER is an application that assists you with various operations of AV Receiver without the remote control. This app allows you not only to control the unit’s power and volume but also to select the input source and start/stop playback. For details, search for “AV CONTROLLER” on the App Store or Google Play. 10 En Application: "MusicCast CONTROLLER" MusicCast CONTROLLER is an application that allows you to link a MusicCast compatible device to other MusicCast compatible devices in other rooms and play them back simultaneously. This app lets you use your smartphone or other mobile device instead of the remote control to easily select music to play back as well as configure the unit and MusicCast compatible devices. For details, search for “MusicCast CONTROLLER” on the App Store or Google Play. Part names and functions Part names and functions of the front panel The part names and functions of the front panel are as follows. 1 3 2 MAIN ZONE 4 5 6 7 8 9 0 A B C YPAO MIC PURE DIRECT ZONE 2 ZONE CONTROL MEMORY INFO (WPS) PRESET FM AM TUNING VOLUME SCENE 1 PHONES INPUT TONE CONTROL 2 3 PROGRAM STRAIGHT (CONNECT) SILENT CINEMA D 1 MAIN ZONE z key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.114) • Standby Through is enabled (p.115) • Network Standby is enabled (p.117) • Bluetooth Standby is enabled (p.120) 3 YPAO MIC jack For connecting the supplied YPAO microphone (p.38). 4 ZONE 2 key Enables/disables the audio output to Zone2 (p.54). 5 Remote control sensor Receives remote control signals (p.8). 4 E FG H I USB 5V 1A J AUX AUDIO K L : FM and AM keys 6 ZONE CONTROL key Changes the zone (main zone or the Zone2) that is controlled by the keys and knobs on the front panel (p.54). 7 INFO (WPS) key Selects the information displayed on the front display (p.57). Enters the wireless LAN connection setup (WPS button configuration) by holding down for a few seconds (p.154). Switch between FM and AM (p.61). A Front display Displays information (p.13). B TUNING keys Select the radio frequency (p.61). C PURE DIRECT key Enables/disables the Pure Direct (p.48). D PHONES jack 8 MEMORY key Registers FM/AM radio stations as preset stations (p.62). Registers Bluetooth, USB, or network content as a shortcut by holding down for a few seconds (p.76). 9 PRESET keys For connecting headphones. E INPUT keys Select an input source. F TONE CONTROL key Select a preset FM/AM radio station (p.62). Recall Bluetooth, USB, or network content that is registered as a shortcut (p.77). 11 En Adjusts the level of high-frequency range (Treble) and lowfrequency range (Bass) individually (p.79). G SCENE keys Switch with one touch between multiple settings set using the SCENE function. Also, turns on the unit when it is in standby mode (p.73). H PROGRAM keys Select a sound program or a surround decoder (p.45). I STRAIGHT (CONNECT) key Enables/disables the straight decode mode (p.47). Enters the MusicCast network addition and the wireless LAN setup by holding down for 5 seconds (p.44). J USB jack For connecting a USB storage device (p.68). K AUX jack For connecting devices, such as portable audio players (p.32). L VOLUME knob Adjusts the volume. 12 En Part names and functions of the front display The part names and functions of the front display are as follows. 2 1 34 6 8 9 0 7 A B STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A - DRC LINK MASTER OUT 5 2 ECO VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR C E D 1 HDMI Lights up when HDMI signals are being input or output. Indicates the HDMI OUT jacks currently outputting an HDMI signal. A Volume indicator 3 Firmware update indicator Lights up when a firmware update is available via the network. 4 Bluetooth indicator Light up while the unit is connected to a Bluetooth device. 5 CINEMA DSP Lights up when CINEMA DSP 3D (p.45) is working. 6 SLEEP Lights up when the sleep timer is on. 7 STEREO Lights up when Adaptive DRC (p.80) is working. D I J Lights up when Compressed Music Enhancer (p.49) is working. H YPAO VOL. Lights up when YPAO Volume (p.80) is enabled. I Speaker indicators Indicates the current volume. Indicate speaker terminals from which signals are output. B VIRTUAL Lights up when the virtual processing is working (p.45) . C ECO Lights up when the eco mode (p.132) is enabled. D Cursor indicators Indicate the remote control cursor keys currently operational. A Front speaker (L) S Front speaker (R) D Center speaker F Surround speaker (L) G Surround speaker (R) H Surround back speaker (L) J Surround back speaker (R) E Information display Displays the current status (such as input name and sound mode name). You can switch the information by pressing INFO (p.57). F Wireless LAN indicator Lights up when the unit is receiving a stereo FM radio signal. Light up while the unit is connected to a wireless network (p.153). TUNED Note Lights up when the unit is receiving an FM/AM radio station signal. This indicator may light up when the unit is added to the MusicCast network. For details, see “Adding the unit to the MusicCast network” (p.44). 8 PARTY H G ENHANCER Lights up when audio output to Zone2 (p.54) is enabled. : A-DRC Lights up when the unit is the master device of the MusicCast network. G 9 ZONE2 OUT1/OUT2 2 LINK MASTER F Lights up when the party mode (p.55) is enabled. 13 En B Presence speaker (L) N Presence speaker (R) L Subwoofer J MUTE Blinks when audio is temporarily muted. Part names and functions of the rear panel The part names and functions of the rear panel are as follows. a b f e cd g c h i TRIGGER OUT 12V 0.1A HDMI (HDCP2.2) HDMI OUT ( HDCP2.2 ) IN NETWORK (4 NET RADIO) (8 SERVER) 2 1 OUT 1 ARC 2 (1 MOVIE) 3 (5 STB) 4 5 (6 GAME) REMOTE ANTENNA AUDIO 1 ( 2 RADIO ) ( 7 TV ) FM OPTICAL AM AUDIO 2 ( 3 MUSIC ) OPTICAL SPEAKERS AUDIO 3 COAXIAL AV 1 AV 2 COMPONENT VIDEO COAXIAL Y PR PB AUDIO 4 PHONO VIDEO SURROUND ZONE OUT AUDIO 5 ZONE 2 EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP FRONT CENTER EXTRA SP1 F.PRESENCE / ZONE2 PRE OUT SUBWOOFER FRONT 1 GND 2 jk ▪ The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections. o l m n 5 HDMI 1–5 jacks A PHONO jacks For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.30). 6 ANTENNA jacks 1 REMOTE IN/OUT jacks For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other devices from another room (p.53). 2 TRIGGER OUT jack For connecting to a device that supports the trigger function (p.35). 3 Wireless antennas For a wireless (Wi-Fi) connection to a network (p.153) and a Bluetooth connection (p.66). 4 HDMI OUT 1–2 jacks For connecting to HDMI-compatible TVs and outputting video/audio signals (p.29). When using ARC, TV audio signal can also be input through the HDMI OUT 1 jack. For connecting to FM and AM antennas (p.32). 7 NETWORK jack For connecting to a turntable (p.31). B ZONE OUT jacks For connecting to the external amplifier used in Zone2 and for outputting audio (p.53). C PRE OUT jacks For a wired connection to a network (p.33). 8 VOLTAGE SELECTOR For connecting to an external power amplifier (p.34). D SUBWOOFER jack (Taiwan, Brazil and Central and South America models only) Selects the switch position according to your local voltage (p.35). 9 Power cable For connecting to an AC wall outlet (p.35). : AV jacks AUDIO jacks For connecting to video/audio playback devices and inputting video/audio signals (p.31). 14 En For connecting to a subwoofer (with built-in amplifier) (p.19). E SPEAKERS terminals For connecting to speakers (p.16). Part names and functions of the remote control The part names and functions of the supplied remote control are as follows. a b c d e 1 Remote control signal transmitter Transmits infrared signals. MAIN ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT o p SCENE f 1 2 3 4 5 6 7 8 TUNER NET RED GREEN h USB 5 PARTY key PRESET YELLOW BLUE Turns on/off the party mode (p.55). Switch with one touch between multiple settings set using the SCENE function. Also, turn on the unit when it is in standby mode (p.73). 7 Input selection keys Select an input source for playback. TOP MENU HOME POP-UP /MENU Note Presses NET repeatedly to select a desired network source. ENHANCER PROGRAM SUR. DECODE VOLUME r BASS s STRAIGHT MEMORY TUNING BAND TUNING In the on-screen menu, the description of a term in the cursor position appears on the TV. This key is enabled when the “?” icon is displayed on the on-screen menu. C Sound mode keys Select a sound mode (p.45). D Playback operation keys Controls playback of the external device. E HDMI OUT key Selects HDMI OUT jacks to be used for video/audio output (p.57). F PURE DIRECT key 6 SCENE keys q n Turns on/off (standby) the unit. 3 MAIN/ZONE 2 switch Pressing this key repeatedly will specify the time (120 min, 90 min, 60 min, 30 min, off), in which the unit switches to the standby mode. BLUETOOTH k m B HELP key 4 SLEEP key i j l Operates the menu. 2 z (receiver power) key Changes the zone that is controlled by the remote control (p.54). INPUT g A ENTER/Cursor, RETURN keys 8ADGHI External device operation keys Let you perform playback operations when “USB” or “NET” is selected as the input source, or control playback of the HDMI Control-compatible playback device. Note The playback devices must support HDMI Control. Some HDMI Control-compatible devices cannot be used. 8 PRESET keys Select a preset FM/AM radio station (p.62). Recall Bluetooth, USB, or network content that is registered as a shortcut (p.77). 9 OPTION key Displays the option menu (p.78). : SETUP key Displays the setup menu (p.89). 15 En Enables/disables the Pure Direct (p.48). H VOLUME keys Adjust the volume. I MUTE key Mutes the audio output. PREPARATIONS 1 Connecting speakers Names and functions of speakers Speaker type Front (L/R) The names and functions of speakers connected to the unit are as follows. E 0.5 to 1 m (1.6 to 3.3 ft) 0.5 to 1 m (1.6 to 3.3 ft) 1 1.8 m (5.9 ft) 9 Center R 2 3 Produce surround channel sounds. Surround speakers also produce surround back channel sounds when no surround back speakers are connected. Surround back (L/R) 6/7 Produce surround back channel sounds. Presence (L/R) E/R Produce CINEMA DSP 3D effect sounds or heights channel sounds of Dolby Atmos and DTS:X contents. ▪ Front Height ▪ Overhead 10° to 30° 6 4/5 9 Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels. The unit provides three layout patterns for presence speakers. You can choose a layout pattern that suits your listening environment. 5 10° to 30° Produces center channel sounds (such as movie dialogue and vocals). Note 9 4 3 Function Produce front channel sounds (stereo sounds). Surround (L/R) Subwoofer 1.8 m (5.9 ft) Abbr. 1/2 ▪ Dolby Enabled SP 7 0.3 m (1 ft) or more Note Use this diagram as a reference for the ideal speaker layout for the unit. Your speaker layout does not need to match the diagram exactly, since the YPAO function can be used to automatically optimize the speaker settings (such as distances) to suit the actual speaker layout. 16 En Speaker systems and speakers to be connected Speaker requirements Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. Speakers and subwoofers to be connected to the unit must meet the following requirements: Speaker type 7.1/5.1.2 5.1 2.1 Front (L/R) 1/2 Center 3 *3 Surround (L/R) 4/5 • Use a subwoofer with built-in amplifier. Note ▪ Prepare the number of speakers according to your speaker system. Surround back (L/R) 6/7 *1 Presence (L/R) E/R *2 *4 Subwoofer 9 • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see the following: – “Setting the speaker impedance” (p.18) Speaker system (the number of channels) ▪ Be sure to connect the front left and right speakers. If you have seven speakers, use two of them as surround back speakers (*1) or presence speakers (*2). If you have five speakers, use two of them as surround speakers (*3) or presence speakers (*4). Note ▪ “5.1.2-channel” denotes “standard 5.1-channel plus 2 for overhead speaker channels”. ▪ When using surround back speakers, be sure to connect the surround back left and right speakers. Using only one surround back speaker was discontinued. ▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. 17 En Setting the speaker impedance How to connect speakers Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to “6 Ω MIN”. n Connecting the speaker 1 2 Connect a speaker cable between the negative (–) terminal of the unit and the negative (–) terminal of the speaker, and between the positive (+) terminal of the unit and the positive (+) unit of the speaker. Before connecting speakers, connect the power cable to an AC wall outlet. Notice While holding down STRAIGHT on the front panel, press MAIN ZONE z. When connecting the speaker cables, take notice of the following: ▪ Prepare speaker cables in a place away from the unit, to avoid accidentally dropping wire strands into the unit's interior which could result in a short circuit or malfunction of the unit. z (MAIN ZONE) ▪ Improper connecting of the speaker cables may cause a short circuit and also damage the unit or the speakers. – Twist the bare wires of the speaker cables firmly together. STRAIGHT 3 Check that “SP IMP.” is displayed on the front display. OUT 2 ECO SP IMP.••8¬MIN 4 5 – Do not let the bare wires of the speaker cable touch one another. STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR Press STRAIGHT to select “6 Ω MIN”. Press MAIN ZONE z to set the unit to standby mode and remove the power cable from the AC wall outlet. – Do not let the bare wires of the speaker cable come into contact with the unit’s metal parts (rear panel and screws). You are now ready to connect the speakers. Cable requirements Use the following types of commercially-available cables to connect speakers to the unit: Speaker cables (the number of speakers required) + – Audio pin cable (for connecting a subwoofer) + – 18 En Note n Connecting the subwoofer ▪ Remove the unit’s power cable from an AC wall outlet before connecting the speakers. ▪ Be sure to connect the front left and right speakers. Use an audio pin cable to connect the subwoofer. ▪ Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see the following: Note Unplug the power cables of the unit and subwoofer from the AC wall outlets before connecting the subwoofer. – “Setting the speaker impedance” (p.18) 1 2 3 4 Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable, and twist the bare wires of the cable firmly together. ZONE OU ZONE Audio pin cable Tighten the terminal. c FR ON T d a - (black) This completes the connection. Note ▪ If “Check SP Wires” appears on the front display when the unit is turned on, turn off the unit, and then confirm that the speaker cables are not short circuited. ▪ (U.S.A., Canada, China, Taiwan, Brazil, Central and South America and General models only) When using a banana plug, tighten the speaker terminal and insert a banana plug into the end of the terminal. a FR ON T Banana plug b 19 R 2 Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the terminal. b PR FRON E OUT T SUB WOOFE 1 Loosen the speaker terminal. + (red) T 2 En How to place speakers (speaker systems) n Using 7.1/5.1.2-channel system This speaker system brings out the full performance of the unit and allows you to enjoy a highly-natural 3-dimensional sound field with any contents. We recommend this speaker system to have a full effect of Dolby Atmos or DTS:X contents. 0.5 to 1 m (1.6 to 3.3 ft) 0.5 to 1 m (1.6 to 3.3 ft) 1 Note 9 ▪ When installing the presence speakers on the ceiling above the listening position, or when using Dolby Enabled speakers as the presence speakers, the presence speaker layout settings must be changed. For details, see the following: 2 3 1.8 m (5.9 ft) ▪ The surround back speakers and presence speakers do not produce sounds simultaneously. The unit automatically changes the speakers to be used, depending on the input signal and CINEMA DSP 3D. R 1.8 m (5.9 ft) 9 4 5 10° to 30° 10° to 30° – “Setting the layout of the presence speakers” (p.97) ▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. 6 7 0.3 m (1 ft) or more SPEAKERS SURROUND ZONE OUT ZONE 2 CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 PRE OUT SUBWOOFER FRONT 1 2 9 9 20 En 5 4 3 2 1 76 RE n For Overhead of the presence speakers layout n Using 5.1.2-channel system To have a full effect of Dolby Atmos or DTS:X contents, we recommend this speaker system. The presence speakers produce a natural 3-dimensional sound field including overhead. E R Note ▪ When installing the presence speakers on the ceiling above the listening position, or when using Dolby Enabled speakers as the presence speakers, the presence speaker layout settings must be changed. For details, see the following: 1 – “Setting the layout of the presence speakers” (p.97) ▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. 3 9 n For Front Height of the presence speakers layout 2 9 4 5 10° to 30° 10° to 30° E 0.5 to 1 m (1.6 to 3.3 ft) 0.5 to 1 m (1.6 to 3.3 ft) 1 1.8 m (5.9 ft) 9 R 2 3 1.8 m (5.9 ft) 9 SPEAKERS 4 5 10° to 30° SURROUND 10° to 30° ZONE OUT ZONE 2 CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 PRE OUT SUBWOOFER FRONT 1 2 9 9 21 En 54321 RE n Using 7.1-channel system This speaker system allows you to enjoy extended surround sound using the surround back speakers. Note You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. 1 2 3 9 9 4 5 10° to 30° 10° to 30° 6 7 0.3 m (1 ft) or more SPEAKERS SURROUND ZONE OUT ZONE 2 CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 PRE OUT SUBWOOFER FRONT 1 2 9 9 22 En 5 4 3 2 1 76 n Using 5.1-channel system This is a basic speaker layout recommended for enjoying surround sound. Note You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. 1 2 3 9 4 5 10° to 30° 10° to 30° SPEAKERS SURROUND ZONE OUT ZONE 2 CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP PRE OUT SUBWOOFER FRONT 1 2 9 23 En 54 3 2 1 EXTRA SP1 F.PRESENCE / ZONE2 n Using 3.1.2-channel system We recommend this speaker layout when you cannot place speakers in the back of the room. You can also enjoy Dolby Atmos or DTS:X content with this speaker system. Note E ▪ When installing the presence speakers to the ceiling above the listening position or using the Dolby Enabled speakers as the presence speakers, configure your presence speaker layout. For details, see the following: 0.5 to 1 m (1.6 to 3.3 ft) 0.5 to 1 m (1.6 to 3.3 ft) 1 – “Setting the layout of the presence speakers” (p.97) 1.8 m (5.9 ft) ▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. 9 R 2 1.8 m (5.9 ft) 3 SPEAKERS SURROUND ZONE OUT ZONE 2 CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 PRE OUT SUBWOOFER FRONT 1 2 9 24 En 321 RE n Using Virtual CINEMA FRONT This speaker layout is recommended if you cannot place speakers in the back of the room. Note ▪ To use Virtual CINEMA FRONT, the speaker configuration settings must be changed. For details, see the following: 1 – “Assigning speaker configuration” (p.37) 2 4 – “Setting the layout of the surround speakers” (p.96) ▪ You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. 5 3 9 SPEAKERS SURROUND ZONE OUT ZONE 2 CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP PRE OUT SUBWOOFER FRONT 1 2 9 25 En 54 3 2 1 EXTRA SP1 F.PRESENCE / ZONE2 n 7.1 + 1Zone Advanced speaker systems n Available configurations for advanced speaker systems using the unit’s internal amplifier In addition to the basic speaker systems, the unit also allows you to apply the following speaker configurations to enhance your system. 1 3 9 • Using the four internal amplifiers for front speakers to have more high-quality sounds (Bi-amp connection) 2 9 4 • Using the excess internal amplifiers for stereo speakers in another room (multi-zone function) 1 2 5 6 7 Zone2 To enjoy following systems, configure the necessary speaker settings in “Power Amp Assign” in the “Setup” menu. For details, see the following: • “Setting your speaker system” (p.94) Main zone Main zone Output channel (max) Bi-amp 7 Surround back/ Presence Multi-zone Power Amp Assign Surround back +1 (Zone2) 7.1 + 1Zone Presence +1 (Zone2) 5.1.2 + 1Zone Speaker Connect to 12 FRONT 3 CENTER 45 SURROUND Note 67 EXTRA SP2 For details on connecting speakers in another room (multi-zone function), see the following: ER (not used) ▪ “Connecting Zone2 speakers using the unit’s internal amplifier” (p.51) 9 SUBWOOFER 1-2 Zone2 speakers EXTRA SP1 7 5 5.1 BI-Amp Note When Zone2 output is enabled, the surround back speakers in the main zone do not output sound. For details on Zone2 output, see the following: ▪ “Controlling Zone2” (p.54) 26 En n 5.1 BI-Amp n 5.1.2 + 1Zone Bi-amp E R 1 1 2 3 9 2 1 2 9 4 9 5 4 3 9 5 Zone2 Main zone Speaker Connect to Speaker Connect to 12 FRONT 12 FRONT and EXTRA SP2 (bi-amp connection) 3 CENTER 3 CENTER 45 SURROUND 45 SURROUND 67 (not used) 67 (not used) ER EXTRA SP1 ER (not used) 9 SUBWOOFER 1-2 9 SUBWOOFER 1-2 Zone2 speakers EXTRA SP2 Note When Zone2 output is enabled, the presence speakers in the main zone do not output sound. For details on Zone2 output, see the following: ▪ “Controlling Zone2” (p.54) 27 En n Connecting front speakers that support bi-amp The unit (rear) connections SPEAKERS SURROUND CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 You can connect the front speakers that support bi-amp connections. To enable the bi-amp function, configure the necessary speaker settings. For details, see the following: 1 2 • “Assigning speaker configuration” (p.37) • “Setting your speaker system” (p.94) Notice ▪ Before making bi-amp connections, remove any brackets or cables that connect a woofer with a tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp connections, make sure that the brackets or cables are connected before connecting the speaker cables. 1 2 Note ▪ The following speakers cannot be connected simultaneously. – Surround back speakers – Bi-amp speakers ▪ The FRONT terminals and EXTRA SP2 terminals output the same signals. 28 En 2 Connecting a TV HDMI connection with a TV HDMI connection with another TV or a projector Connect a TV to the unit with an HDMI cable. If you connect a TV that supports ARC to the unit, you can output video/audio to the TV or input TV audio to the unit. The unit has two HDMI output jacks. If you connect another TV or a projector to the unit with an HDMI cable, you can switch the TV (or projector) to be used for watching videos with the remote control. For details, see the following: The unit (rear) • “Selecting an HDMI output jack” (p.57) HDMI OUT jack TRIGGER OUT 12V 0.1A HDMI input HDMI OUT ( HDCP2.2 ) HDMI OUT ( HDCP2.2 ) IN 2 1 OUT 1 ARC 2 (1 MOVIE) (5 STB) HDMI OUT 2 jack HDMI HDMI OUT ANTENNA AUDIO 1 ( HDCP2.2 ) ( 2 RADIO ) ( 7 TV ) FM OPTICAL TRIGGER OUT 12V 0.1A AM 2 1 AUDIO 2 ( 3 MUSIC ) ARC HDMI OUT ( HDCP2.2 ) IN OPTICAL 2 AUDIO 3 AV 1 1 OUT AV 2 COMPONENT VIDEO COAXIAL 1 ARC (1 MOVIE) VIDEO REMOTE ANTENNA AUDIO 1 ( 2 RADIO ) ( 7 TV ) Y FM OPTICAL PR PB AUDIO 4 PHONO ZONE OUT AUDIO 5 ZONE 2 PRE OUT FRONT AM HDMI COAXIAL TV ARC HDMI REMOTE The unit (rear) HDMI 1 2 AUDIO 2 ( 3 MUSIC ) OPTICAL GND AUDIO 3 AV 1 TV (already connected) AV 2 COMPONENT VIDEO COAXIAL HDMI HDMI input VIDEO HDMI COAXIAL TV Y PR PB AUDIO 4 PHONO AUDIO 5 GND Projector About Audio Return Channel (ARC) ▪ ARC allows audio signals to travel both ways with a single HDMI cable. To use ARC, connect to the TV using an HDMI cable that supports ARC. Note HDMI Control is not available on the HDMI OUT 2 jack. Note ▪ If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s power and volume with the TV’s remote control. ▪ To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the settings, see the following: – “HDMI Control and synchronized operations” (p.170) – “Audio Return Channel (ARC)” (p.171) ▪ If your TV does not support Audio Return Channel (ARC), a digital optical cable connection between the TV and the unit is needed. 29 En 3 Connecting playback devices HDMI connection with a video device such as a BD/DVD player Connection other than HDMI with a playback device n VIDEO (component video) connection with a video Connect a video device to the unit with an HDMI cable. The unit (rear) device HDMI 1–5 jacks Connect a video device to the unit with a component video cable and a digital coaxial cable. HDMI (HDCP2.2) 1 HDMI (HDCP2.2) HDMI OUT ( HDCP2.2 ) 2 (1 MOVIE) 1 1 ARC (1 MOVIE) 2 3 (5 STB) 4 3 (5 STB) 4 5 (6 GAME) Output jacks on video device 5 (6 GAME) Video Audio Composite video Digital coaxial ANTENNA ( 2 RADIO ) FM AM SPEAKERS AV 1 AV 2 COMPONENT VIDEO PR AUDIO 4 VIDEO SURROUND ZONE OUT AUDIO 5 ZONE 2 CENTER FRONT HDMI HDMI OUT jack PRE OUT SUBWOOFER FRONT AV 1 (COMPONENT VIDEO + COAXIAL) HDMI 1 2 Input jacks on the unit Audio output (digital coaxial) HDMI The unit (rear) Video device TRIGGER OUT 12V 0.1A AV 1 (COAXIAL) jack HDMI OUT ( HDCP2.2 ) IN 2 1 OUT 1 ARC (1 MOVIE) 2 (5 STB) C REMOTE ANTENNA AUDIO 1 COAXIAL ( 2 RADIO ) ( 7 TV ) FM OPTICAL AM C AUDIO 2 ( 3 MUSIC ) COAXIAL COMPONENT VIDEO OPTICAL AUDIO 3 COAXIAL AV 1 AV 2 VIDEO COMPONENT VIDEO COAXIAL Y PR PB AUDIO 4 PHONO ZONE OUT AUDIO 5 GND Y PB PR ZONE 2 PR PRE OUT FRONT PR PR PB PB Y Y Video device PB Y AV 1 (COMPONENT VIDEO) jack Video output (component video) Note ▪ This unit supports only the video signals of 480i and 576i (resolution). ▪ If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device. For details, see the following: – “Combining audio of another input source with video of the current input source” (p.126) 30 En n VIDEO (composite video) connection with a video Audio output jacks on audio device Audio input jacks on the unit Digital optical AUDIO 1–2 (OPTICAL) Digital coaxial AUDIO 3 (COAXIAL) AV 1 (COAXIAL) Analog stereo AUDIO 4–5 (AUDIO) AV 2 (AUDIO) Turntable (PHONO) PHONO device Connect a video device to the unit with a video pin cable and a stereo pin cable. Output jacks on video device Input jacks on the unit Video Audio Composite video Analog stereo AV 2 (VIDEO + AUDIO) The unit (rear) The unit (rear) TRIGGER OUT 12V 0.1A HDMI OUT ( HDCP2.2 ) IN 2 1 OUT 1 ARC Video output (composite video) AV 2 (VIDEO) jack TRIGGER OUT 12V 0.1A O VIDEO ANTENNA 1 FM OPTICAL AM Y PR PB AUDIO 4 AUDIO 3 VIDEO L L AV 2 Video device Y PR PB AUDIO 4 PHONO L C R ZONE OUT ZONE 2 AUDIO 5 PRE OUT SUBWOOFER FRONT 1 GND GND R R R Audio device L VIDEO COAXIAL COAXIAL L AV 1 COMPONENT VIDEO COAXIAL ZONE AUDIO 5 COAXIAL O OPTICAL L COAXIAL AM OPTICAL ( 3 MUSIC ) V AV 2 COMPONENT VIDEO 4 (6 GAME) C AUDIO 2 V PHONO FM OPTICAL AUDIO 2 AV 1 3 (5 STB) ( 2 RADIO ) ( 7 TV ) ( 3 MUSIC ) AUDIO 3 2 (1 MOVIE) ANTENNA AUDIO 1 VIDEO OPTICAL COAXIAL 1 ARC REMOTE ( 2 RADIO ) ( 7 TV ) OPTICAL 2 OUT AUDIO 1 HDMI (HDCP2.2) HDMI OUT ( HDCP2.2 ) IN (1 MOVIE) REMOTE Audio output (either digital optical, digital coaxial, or analog stereo) AV 1-2 jacks AUDIO 1-5 jacks L R 2 R R PHONO L PHONO AV 2 (AUDIO) jacks Audio output (analog stereo) L L R R GND R GND Note Turntable PHONO jacks If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device. For details, see the following: Ground lead Audio output (PHONO) Note ▪ “Combining audio of another input source with video of the current input source” (p.126) ▪ The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a low-output MC cartridge, use a boosting transformer. n AUDIO connection with an audio device such as a CD ▪ Connecting the turntable to the GND terminal of the unit may reduce noise in the signal. player ▪ “AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 1 jacks, use “TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the SCENE function, you also need to change the input assignment for SCENE (7). For details, see the following: Connect audio devices such as CD players and MD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. – “Setting the audio jack used for TV audio input” (p.114) – “Registering a scene” (p.75) 31 En Connecting to the jack on the front panel 4 Connecting the FM/AM antennas Use the AUX jack on the front panel to temporarily connect devices such as portable audio players to the unit. Connecting the FM/AM antennas Connect the supplied FM/AM antennas to the unit. Caution Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface. ▪ Before making a connection, stop playback on the device and turn down the volume on the unit. The volume may be unexpectedly loud, and this could result in damage to hearing. FM antenna AM antenna Note You need to prepare the audio cable that matches the output jacks on your device. VOLUME SCENE 1 INPUT TONE CONTROL 2 3 PROGRAM 4 STRAIGHT TRIGGER OUT 12V 0.1A USB AUX HDMI (HDCP2.2) HDMI OUT ( HDCP2.2 ) IN 5V 1A NETWORK (4 NET RADIO) (8 SERVER) 2 1 OUT (CONNECT) 1 ARC (1 MOVIE) 2 3 (5 STB) 4 5 (6 GAME) REMOTE AUDIO ANTENNA AUDIO 1 ( 2 RADIO ) ( 7 TV ) FM OPTICAL AM AUDIO 2 ( 3 MUSIC ) OPTICAL SPEAKERS AUDIO 3 COAXIAL AV 2 COMPONENT VIDEO COAXIAL The unit (front) AV 1 Y PHONO PR PB AUDIO 4 VIDEO SURROUND ZONE OUT AUDIO 5 ZONE 2 CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP PRE OUT SUBWOOFER FRONT The unit (rear) Assembling and connecting the AM antenna Portable audio player If you select “AUX” as the input source by pressing INPUT, the audio played back on the device will be output from the unit. Hold down Insert Note ▪ Unwind only the length of cable needed from the AM antenna unit. ▪ The wires of the AM antenna have no polarity. 32 En Release 5 Preparing for connecting to a network Preparing for connecting to a network Internet Network Attached Storage (NAS) The unit supports wired and wireless connections. Select a connection method according to your network environment. WAN If you are using a router that supports DHCP in the wired connection, you do not need to configure any network settings for the unit. LAN Modem Note You need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters manually. For details, see the following: PC The unit (rear) Network cable ▪ “Setting the network parameters manually” (p.117) Wireless router NETWORK (4 NET RADIO) (8 SERVER) To connect the unit to a wireless network, select one of the following methods to configure the wireless network settings. l Method using the MusicCast setting When adding the unit to the MusicCast network, you can also configure the unit’s wireless network settings at once. If you use MusicCast CONTROLLER, we recommend the wireless connection to MusicCast network. For details, see the following: – “Adding the unit to the MusicCast network” (p.44) SPEAKERS CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 Note l Other methods For details, see the following: – “Selecting a wireless network connection method” (p.153) ▪ If you are using a router that supports DHCP, you do not need to configure any network settings for the unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters manually. For details, see the following: Connecting a network cable (wired connection) – “Setting the network parameters manually” (p.117) ▪ You can check whether the network parameters (such as IP address) are properly assigned to the unit. For details, see the following: Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). – “Checking the network information on the unit” (p.116) You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. 33 En Preparing wireless antennas (wireless connection) 6 Connecting other devices Stand the wireless antennas upright for connecting to the wireless network or a Bluetooth device wirelessly. Connecting an external power amplifier For information on how to connect the unit to a wireless network, see the following: When connecting an external power amplifier (pre-main amplifier) to enhance speaker output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit. The same channel signals are output from the PRE OUT jacks as from their corresponding SPEAKERS terminals. • “Preparing for connecting to a network” (p.33) Caution ▪ To prevent the generation of loud noises or abnormal sounds, make sure the followings before making connections. – Unplug the power cable of the unit and turn off the external power amplifier before connecting them. – When using the PRE OUT jacks, do not connect speakers to the corresponding SPEAKERS terminals. – When using an external amplifier that does not have the volume control bypass, do not connect other devices (except the unit) to the amplifier. Notice The unit (rear) ▪ Do not apply excessive force on the wireless antenna. Doing so may damage the antenna. HDMI (HDCP2.2) NETWORK (4 NET RADIO) (8 SERVER) 1 (1 MOVIE) 2 3 (5 STB) 4 5 (6 GAME) SPEAKERS AV 2 VIDEO SURROUND ZONE OUT ZONE 2 CENTER FRONT EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 PRE OUT SUBWOOFER FRONT 1 2 ab 1 FRONT jacks Output front channel sounds. 2 SUBWOOFER 1–2 jacks For connecting a subwoofer with built-in amplifier. 34 En Connecting a device compatible with the trigger function 7 Plugging in the power cable The trigger function can control an external device in conjunction with operating the unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that supports a system connection or a device with a trigger input jack, you can use the trigger function by connecting the external device to the TRIGGER OUT jack with a monaural mini-jack cable. Plugging in the power cable Warning (Taiwan, Brazil and Central and South America models only) Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential fire hazard. Before plugging in the power cable TRIGGER OUT jack Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110– 120/220–240 V, 50/60 Hz. TRIGGER OUT 12V 0.1A TRIGGER OUT 12V 0.1A HDMI OUT ( HDCP2.2 ) IN 2 1 OUT 1 ARC (1 MOVIE) 2 (5 STB) REMOTE ANTENNA AUDIO 1 ( 2 RADIO ) ( 7 TV ) FM OPTICAL System connector jack The unit (rear) AM AUDIO 2 ( 3 MUSIC ) VOLTAGE SELECTOR OPTICAL AUDIO 3 AV 2 COMPONENT VIDEO COAXIAL COAXIAL AV 1 Y PR PB AUDIO 4 PHONO VIDEO VOLTAGE SELECTOR ZONE OUT AUDIO 5 220V240V ZONE 2 GND 110V120V Yamaha subwoofer that supports a system connection EXTRA SP2 SURROUND BACK / BI-AMP The unit (rear) EXTRA SP1 F.PRESENCE / ZONE2 Note You can configure the trigger function settings. For details, see the following: ▪ “Specifying the zone with which the TRIGGER OUT jack functions are synchronized” (p.131) After all the connections are complete, plug in the power cable. The unit (rear) NETWORK (4 NET RADIO) (8 SERVER) To an AC wall outlet SPEAKERS FRONT 35 En EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 8 Selecting the on-screen menu language Selecting the on-screen menu language 7 This completes the necessary settings. Select the desired on-screen menu language. 1 2 Note Press z (receiver power) to turn on the unit. The information on the front display is provided in English only. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). Note When you turn on the unit for the first time, a message regarding the network setup appears. You can switch the language on this message screen. 3 4 5 6 To exit from the menu, press SETUP. Press SETUP. Use the cursor keys to select “System” and press ENTER. Use the cursor keys to select “Language” and press ENTER. Use the cursor keys to select the desired language. 36 En 9 Configuring the necessary speaker settings Assigning speaker configuration 5 If you use any of the following speaker configurations, perform the following procedure to configure the corresponding speaker settings manually before performing YPAO. • Using the bi-amp connection (playing back more high-quality sounds with bi-amp connections) • Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT) • Using the presence speakers for Dolby Atmos or DTS:X playback ▪ Using the presence speakers for Dolby Atmos or DTS:X playback, select your presence speaker layout in “Configuration”. For details, see the following: – “Setting the layout of the presence speakers” (p.97) Note For details on the speaker configurations, see the following: ▪ “Connecting front speakers that support bi-amp connections” (p.28) ▪ “Playing back music in multiple rooms” (p.51) ▪ “Using Virtual CINEMA FRONT” (p.25) 6 ▪ “Presence speaker layout” (p.162) To exit from the menu, press SETUP. This completes the speaker settings. Press z (receiver power) to turn on the unit. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). Note If you turn on the unit for the first time, the message regarding the network setup appears. For now, press RETURN and proceed to Step 3. 3 4 ▪ Using bi-amp connections or Zone2 speakers, select your speaker system in “Power Amp Assign”. For details, see the following: – “Setting your speaker system” (p.94) ▪ Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT), select your surround speaker layout in “Configuration”. For details, see the following: – “Setting the layout of the surround speakers” (p.96) • Using the Zone2 speakers 1 2 Configure the corresponding speaker settings. Press SETUP. Use the cursor keys to select “Speaker” and press ENTER. 37 En Optimizing the speaker settings automatically (YPAO) The unit (front) The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. 1 2 Note ▪ Use YPAO after connecting a TV and speakers to the unit. 9 3 ▪ Configure the corresponding speaker settings manually before performing YPAO. For details on the settings, see the following: – “Assigning speaker configuration” (p.37) 4 ▪ During the measuring process, test tones are output at high volume, and you cannot adjust the volume. 5 ▪ During the measuring process, keep the room as quiet as possible and do not stand between the speakers and the YPAO microphone for accurate measurement. ▪ Do not connect headphones. 1 2 3 Press z (receiver power) to turn on the unit. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). The following screen appears on the TV. Turn on the subwoofer and set the volume to half. If the crossover frequency is adjustable, set it to maximum. VOLUME MIN 4 Ear height MAX CROSSOVER/ HIGH CUT MIN 9 MAX Place the YPAO microphone at your listening position and connect it to the YPAO MIC jack on the front panel. Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand. You can use the tripod screws to stabilize the microphone. Note ▪ To cancel the operation, disconnect the YPAO microphone before starting the measurement. ▪ To configure the power amplifier assignment setting, press RETURN and select “Speaker” in the “Setup” menu. For details, see the following: – “Setting your speaker system” (p.94) 38 En 5 7 To start the measurement, press ENTER. Use the cursor keys to select “Save” and press ENTER. The measurement will start in 10 seconds. Press ENTER to start the measurement immediately. The following screen appears on the TV when the measurement finishes. 1 The adjusted speaker settings are applied. Note To finish the measurement without applying the result, select “Cancel”. 1 Warning message (if available) 8 Note ▪ To stop the measurement temporarily, press RETURN. ▪ If any error message or warning message appears, see the following: Notice – “Error messages from YPAO” (p.42) ▪ The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). – “Warning messages from YPAO” (p.43) 6 Disconnect the YPAO microphone from the unit. This completes optimization of the speaker settings. Confirm the results displayed on the screen. Note Note To check the measurement results specifically, select “Measurement result” and press ENTER. For details, see the following: ▪ “Checking the YPAO measurement results” (p.40) 39 “YPAO Volume” in the “Option” menu is automatically enabled after the YPAO measurement. Then, the highand low-frequency levels are automatically adjusted according to the volume so that you can enjoy natural sounds even at low volume. For details on “YPAO Volume”, see the following: ▪ “Adjusting the high- and low-frequency levels automatically according to the volume” (p.80) En Checking the YPAO measurement results 3 You can check the YPAO measurement results. 1 After the measurement, use the cursor keys to select “Measurement result” and press ENTER. Note You can also check the previous measurement results in the “Setup” menu. For details, see the following: ▪ “Reloading the previous YPAO adjustments” (p.100) The following screen appears. a b 2 1 Measurement result items 2 Measurement result details Use the cursor keys to select an item. Polarity of each speaker Wiring Reverse: The speaker cable may be connected with the reverse polarity (+/-). Size of each speaker (cross-over frequency of the subwoofer) Size Large: The speaker can reproduce low-frequency signals effectively. Small: The speaker cannot reproduce low-frequency signals effectively. Distance Distance from the listening position to each speaker Level Output level adjustment for each speaker 40 En To finish checking the results and return to the previous screen, press RETURN. Reloading the previous YPAO adjustments 5 This completes the settings. When the speaker settings you have configured manually are not suitable, follow the procedure below to discard the manual settings and reload the previous YPAO adjustments. 1 2 3 4 Press SETUP. Note For details, see the following: ▪ “Reloading the previous YPAO adjustments” (p.100) Press SETUP. Use the cursor keys to select “Speaker” and press ENTER. Use the cursor keys to select “YPAO Result” and press ENTER. Use the cursor keys to select “Setup Reload” and press ENTER. 41 En Error messages from YPAO Error message Remedy ERROR 1 Front speakers are not detected. If any error message is displayed during the measurement, resolve the problem and perform YPAO again. ERROR 2 One of the surround speakers cannot be detected. ERROR 3 Exit YPAO, turn off the unit, and then check the speaker connections. One of the front presence speakers cannot be detected. Error message ERROR 4 One of the surround back speakers cannot be detected. ERROR 5 The noise is too loud. ERROR 6 TV screen Surround back speakers are connected, but no surround speakers are connected. ERROR 7 The YPAO microphone has been removed. ERROR 8 The YPAO microphone cannot detect test tones. ERROR 9 Canceled by user operation Keep the room quiet and retry YPAO. If you select “Proceed”, YPAO takes the measurement again and ignores any noise detected. Surround speakers need to be connected in order to use surround back speakers. Exit YPAO, turn off the unit, and then reconnect the speakers. Connect the YPAO microphone to the YPAO MIC jack firmly and retry YPAO. Connect the YPAO microphone to the YPAO MIC jack firmly and retry YPAO. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service center. Retry or exit YPAO as necessary. To exit the YPAO, use the cursor keys to select “Quit” and press ENTER. Exit YPAO, and turn off and on the unit. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or An internal error has occurred. service center. ERROR 10 Note ▪ To exit the YPAO measurement for resolving the problem, use the cursor keys to select “Quit” and press ENTER. ▪ For the ERROR 5 and ERROR 9 messages only, you can proceed with the current YPAO measurement. Use the cursor keys to select “Proceed” and press ENTER. ▪ To retry the YPAO measurement from beginning, use the cursor keys to select “Retry” and press ENTER. 42 En Warning messages from YPAO Warning message Remedy Use the cursor keys to select “Measurement result” and press ENTER, and then select “Wiring” in “Measurement result”. Check the cable connections (+/-) of the speaker identified by “Reverse”. If a warning message is displayed after the measurement, you can still apply the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. WARNING 1 A speaker cable may be connected with the reverse polarity (+/-). If the speaker is connected incorrectly: Turn off the unit, reconnect the speaker cable. If the speaker is connected correctly: Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. In this case, you can ignore the message. Warning message WARNING 2 A speaker is placed more than 24 m (80 ft) from the listening position. TV screen WARNING 3 There are significant volume differences between the speakers. 43 En Use the cursor keys to select “Measurement result” and press ENTER, and then select “Distance” in “Measurement result”. Check the speaker identified by “>24.00m (>80.0ft)”. Exit YPAO, turn off the unit, and place the problem speaker within 24 m (80 ft) of the listening position. Use the cursor keys to select “Measurement result” and press ENTER, and then select “Level” in “Measurement result”. Check the speaker identified by “>+10.0dB” or “<-10.0dB”. Then, check the usage environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. If there is any problem, exit YPAO, turn off the unit, and then reconnect speaker cable or correct the speaker positions. We recommend using the same speakers or speakers with specifications that are as similar as possible. 10 Setting MusicCast What is MusicCast 2 MusicCast is a brand new wireless musical solution from Yamaha, allowing you to share music among all of your rooms with a variety of devices. You can enjoy music from your smartphone, PC, NAS drive and music streaming service anywhere in your house with one easy-to-use application. For more details and a lineup of MusicCast compatible products, refer to the following site: http://www.yamaha.com/musiccast/ • Seamlessly control all MusicCast compatible devices with the dedicated application “MusicCast CONTROLLER”. CONNECT • Link a MusicCast compatible device to another device in a different room and play them back simultaneously. 3 • Play back music from music streaming services. (The compatible music streaming services may differ depending on your region and product). Operate the “MusicCast CONTROLLER” application following the onscreen instructions to set up the network. This completes adding the unit to the MusicCast network and the network settings. • Configure wireless network settings of MusicCast compatible devices. Note ▪ AirPlay and DSD audio cannot be delivered. Using MusicCast CONTROLLER ▪ When the Pure Direct is enabled, input sources other than the network sources, Bluetooth and USB cannot be delivered. To use the network features on the MusicCast compatible device, you need the dedicated application “MusicCast CONTROLLER” for the operation. Search for the free application “MusicCast CONTROLLER” on the App Store or Google Play and install it to your device. ▪ If you configure the unit's wireless settings with this method, the wireless LAN indicator of the front display lights up when the unit is connecting to a network (even if a wired connection is used). ▪ You can interlock the power of MusicCast devices with the power of the unit (the MusicCast master). For details on the settings, see the following: – “Setting the power interlock from the unit to MusicCast compatible devices” (p.119) Adding the unit to the MusicCast network Perform the following procedure to add the unit to the MusicCast network. You can also configure the unit’s wireless network settings at once. Note The SSID and security key for your network will be needed. 1 Operate the “MusicCast CONTROLLER” application following the on screen instructions, then hold down CONNECT on the front panel of the unit for 5 seconds. Tap the “MusicCast CONTROLLER” application icon on your mobile device and tap “Setup”. Note If you have already connected other MusicCast compatible devices to the network, tap “Settings” and then “Add New Device”. 44 En ENJOYING SOUND Enjoying sound field effects Enjoying 3D sound fields (CINEMA DSP 3D) Select your favorite sound mode The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). MAIN MAI N The unit is equipped with a variety of sound programs that utilize Yamaha's original DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual movie theaters or concert halls in your room and enjoy natural threedimensional sound fields. ZONE 2 SLEEP PARTYY PART MAIN PURE DIRECT HDMI OUT OUT Sound program category PURE DIRECT ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT “CINEMA DSP” lights up SCENE SCENE 1 2 3 4 5 6 7 8 TUNER NET LINK MASTER 1 INPUT USB 2 3 4 OUT 2 ECO BLUETOOTH RED GREEN YELLOW BLUE 5 6 7 8 HOME Note VOLUME ENHANCER BASS STRAIGHT MEMORY BAND FPL FPR SL SW SR SBL SB SBR POP-UP /MENU ENHANCER TUNING VOL. MUTE VIRTUAL Sound program INPUT TOP MENU PROGRAM SUR. DECODE STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC Sci-Fi PRESET TUNING PROGRAM SUR. DECODE VOLUME V VOL VO OLUME OLUME LUME BASS ENHANCER SUR. DECODE BASS STRAIGHT PROGRAM ▪ You can adjust the sound field effect level. For details, see the following: – “Adjusting the sound field effect level” (p.104) ▪ The sound mode can be applied separately to each input source. ▪ We recommend using presence speakers in order to experience the full effect of the stereoscopic sound fields. However, even when no presence speakers are connected, the unit creates Virtual Presence Speaker (VPS) using the front, center, and surround speakers to produce stereoscopic sound fields. STRAIGHT MEM ME MEMORY MORY TUNIN TUNING NINGG BAN BAND AND D TUNIN TUNING NINGG Note ▪ If a multichannel source (6.1/7.1-channel) is input when no surround back speakers are connected, the unit creates Virtual Surround Back Speaker (VSBS) using the surround speakers to add a sense of depth to the rear sound field. ▪ The sound mode can be applied separately to each input source. ▪ When VPS or VSBS is working, “VIRTUAL” lights up in the front display. ▪ You can check which speakers are currently outputting sound by looking at the speaker indicators on the front display. 45 En Enjoying sound field effects optimized for the type of content Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT) The unit is equipped with a variety of sound programs. You can enjoy the surround sound even when the surround speakers are placed in front. You can enjoy playback sources with your favorite sound mode, such as with a sound field effect added or with stereo playback. When “Layout” in “Surround” in the “Setup” menu is set to “Front”, the unit creates the virtual surround speakers in the rear side to allow you to enjoy multichannel surround sound with the 5 speakers placed in the front. • We recommend a sound program in the “MOVIE” category to enjoy video content. • We recommend a sound program in the “MUSIC” category to enjoy music content. For details on the sound programs, see the following: Note • “Selecting sound programs” (p.103) ▪ For details on the settings, see the following: Note ▪ When Virtual CINEMA FRONT is working, “VIRTUAL” lights up on the front display. – “Setting the layout of the surround speakers” (p.96) You can select a sound program by pressing PROGRAM. Enjoying surround sound with headphones (SILENT CINEMA) Enjoying sound field effects without surround speakers (Virtual CINEMA DSP) If you select one of the sound programs (except 2ch Stereo and 7ch Stereo) when no surround speakers are connected, the unit automatically creates the surround sound field using the front speakers. You can enjoy surround or sound field effects, like a multichannel speaker system, with stereo headphones by connecting the headphones to the PHONES jack and selecting a sound program or a surround decoder. Note When Virtual CINEMA DSP is working, “VIRTUAL” lights up on the front display. 46 En Enjoying unprocessed playback Enjoying multichannel playback without sound field effects (surround decoder) Enjoying original sound (straight decode) When STRAIGHT is pressed and the straight decode mode is enabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources. LINK MASTER OUT 2 ECO Press SUR. DECODE to select a surround decoder. The surround decoder enables multichannel playback from 2-channel sources without sound field effects. STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC STRAIGHT MAIN ZONE 2 SLEEP VOL. MUTE VIRTUAL PARTY FPL FPR SL SW SR SBL SB SBR PURE DIRECT HDMI OUT SCENE Each time you press the key, the straight decode mode is enabled or disabled. 1 2 3 5 6 7 TUNER NET 4 8 INPUT ENHAN ENHA ENHANCER NCER USB BLUETOOTH PRESET RED Note GREEN YELLOW BLUE PROG PR PROGRAM OGRA RAM M SUR. DECODE ▪ When surround back speakers are used, the unit produces 7.1-channel sound for 5.1-channel sources. VOLUME V VOL VO OLUME OLUME LUME SUR. DECODE BASS BASS TOP MENU ▪ If “Layout” in “Surround” in the “Setup” menu is set to “Front”, Virtual CINEMA FRONT works when multichannel source is played back. For details, see the following: HOME POP-UP /MENU ENHANCER PROGRAM SUR. DECODE STRAIGHT VOLUME BASS MEM ME MEMORY MORY STRAIGHT – “Setting the layout of the surround speakers” (p.96) MEMORY TUNING BAND TUNING TUNIN TUNING NINGG – “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.46) BAN BAND AND D TUNIN TUNING NINGG “SUR. DECODE” appears LINK MASTER OUT ECO 2 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC †‡ Dsur VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Each time you press the key, the surround decoder changes. 47 En Note Enjoying pure high fidelity sound (Pure Direct) ▪ You can also change the surround decoder in “Surround Decoder” in the “Setup” menu. For details, see the following: When PURE DIRECT is pressed and the direct playback mode is enabled, the unit plays back the selected source with the least circuitry. It allows you to enjoy Hi-Fi sound quality. – “Selecting the surround decoder used in the program” (p.107) ▪ For details on each decoder, see the following: – “Glossary of audio decoding format” (p.164) STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi - Res ENHANCER YPAO VOL. A- DRC LINK MASTER ▪ You can adjust the surround decoder parameters in “Surround Decoder” in the “Setup” menu. For details, see the following: OUT 2 ECO PURE DIRECT – “Adjusting the center localization (broadening effect) of the front sound field” (p.108) VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Each time you press the key, the direct playback mode is enabled or disabled. – “Setting the use of Center Spread” (p.108) Note ▪ The selected surround decoder may not work for some input sources. ▪ We recommend Dolby Surround while network streaming is Dolby contents. When the Pure Direct is enabled, the following functions are not available. ▪ When the Dolby Surround decoder or the Neural:X decoder is selected, virtual surround processing (such as Virtual CINEMA FRONT) does not work. For details, see the following: ▪ Using the multi-zone function ▪ Selecting sound programs – “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.46) ▪ Adjusting the tone control – “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.46) ▪ Operating the on-screen “Setup” and “Option” menus ▪ Viewing information on the front display (when not in operation) 48 En Enjoying enhanced bass sound Enjoying enhanced compressed music Enhancing the bass (Extra Bass) Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer) Press BASS to enable Extra Bass and enjoy enhanced bass sound, regardless of the size of the front speakers and the presence or absence of a subwoofer. Each time you press the key, Extra Bass is enabled or disabled. Press ENHANCER to enable Compressed Music Enhancer and add depth and breadth to the sound, allowing you to enjoy a dynamic sound close to the original sound before it was compressed. This function can be used along with any other sound modes. Note You can also use “Extra Bass” in the “Option” menu to enable/disable Extra Bass. For details, see the following: ▪ “Setting the use of Extra Bass” (p.83) “ENHANCER” lights up STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER OUT 2 ECO Enhancer On VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Each time you press the key, Compressed Music Enhancer is enabled or disabled. Note ▪ Compressed Music Enhancer does not work on the following audio sources. – Signals whose sampling frequency is over 48 kHz – DSD audio ▪ You can also use “Enhancer” in the “Option” menu to enable/disable Compressed Music Enhancer. For details, see the following: – “Setting Compressed Music Enhancer” (p.82) 49 En Enjoying Dolby Atmos® and DTS:X™ Enjoying Dolby Atmos® and DTS:X™ Playing back Dolby Atmos or DTS:X content creates realistic sound that comes from every direction, including overhead. To receive the full effect of Dolby Atmos or DTS:X content, we recommend a speaker system with presence speakers. Note For details on the speaker system with the presence speakers, see the following: ▪ “Using 7.1/5.1.2-channel system” (p.20) ▪ “Using 5.1.2-channel system” (p.21) About Dolby Atmos® ▪ Dolby Atmos contents are decoded as Dolby TrueHD or Dolby Digital Plus in the following situations. (Dolby Atmos PCM format is always decoded as Dolby Atmos.) – Neither surround back nor presence speakers are used. – Headphones are used (2-channel playback). ▪ When the Dolby Atmos decoder is selected, virtual surround processing (such as Virtual CINEMA FRONT) does not work. For details, see the following: – “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.46) – “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.46) About DTS:X™ ▪ When DTS:X contents are played back, you can adjust the volume of dialogue sounds in “DTS Dialogue Control” in the “Option” menu. For details, see the following: – “Adjusting the volume of dialogue sound during DTS:X™ playback” (p.81) ▪ When the DTS:X decoder is selected, virtual surround processing (such as Virtual CINEMA FRONT) does not work. For details, see the following: – “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.46) – “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.46) 50 En Enjoying music in multiple rooms Playing back music in multiple rooms Connecting Zone2 speakers The multi-zone function allows you to play back different input sources in the room where the unit is installed (Main zone) and in another room (Zone2). n Connecting Zone2 speakers using the unit’s internal For example, while you are watching TV in the living room (Main zone), another person can listen to radio in the study room (Zone2). Two methods for connecting the device that will be used in Zone2 to the unit are available; using the unit’s internal amplifier or using an external amplifier. When using an external amplifier, you can select 7.1/5.1.2-channel speaker system in Main zone. amplifier Connect the speakers placed in Zone2 to the unit with a speaker cable. Notice ▪ Unplug the unit’s power cable from an AC wall outlet before connecting the speakers. • “Connecting Zone2 speakers using the unit’s internal amplifier” (p.51) To enable the multi-zone function, configure the necessary speaker settings. For details, see the following: • “Connecting Zone2 speakers using an external amplifier” (p.53) • “Available configurations for advanced speaker systems using the unit’s internal amplifier” (p.26) • “Assigning speaker configuration” (p.37) • “Setting your speaker system” (p.94) Note You can also connect Zone2 speakers using an external amplifier. For details, see the following: ▪ “Connecting Zone2 speakers using an external amplifier” (p.53) Study room (Zone2) Living room (Main zone) Note ▪ Digital and analog audio sources (including FM/AM radio), Bluetooth, USB, and network sources can be output to Zone2. To listen to the playback of an external device in Zone2, you need to connect the device to the AUDIO jacks (AV 1-2, AUDIO 1-5 or PHONO jacks) of the unit. ▪ “Main Zone Sync” allows you to play back the same audio output in Main zone as Zone2. When “Main Zone Sync” is selected as the Zone2 input, the Zone2 input automatically switches in conjunction with the input source selected in the main zone. ▪ The party mode allows you to play back the same audio output in Main zone as Zone2, whatever the input audio signal type. Multichannel sources are mixed down to 2 channels and output to the Zone2. For details on the party mode, see the following: – “Enjoying the same source in multiple rooms (party mode)” (p.55) 51 En n When using surround back speakers in the main zone n When using presence speakers in the main zone Connect Zone2 speakers to the EXTRA SP1 terminals. To utilize the EXTRA SP terminals for Zone2 speakers, set “Power Amp Assign” in the “Setup” menu to “7.1 +1Zone”. For details, see the following: Connect Zone2 speakers to the EXTRA SP2 terminals. To utilize the EXTRA SP terminals for Zone2 speakers, set “Power Amp Assign” in the “Setup” menu to “5.1.2 +1Zone”. For details, see the following: • “Setting your speaker system” (p.94) • “Setting your speaker system” (p.94) The unit (rear) The unit (rear) SPEAKERS SURROUND FRONT CENTER SPEAKERS EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 SURROUND PRE OUT SUBWOOFER FRONT PRE OUT SUBWOOFER FRONT 1 1 2 2 E 1 9 2 1 3 9 4 5 6 EXTRA SP2 SURROUND BACK / ZONE2 / BI-AMP EXTRA SP1 F.PRESENCE / ZONE2 R 1 2 FRONT CENTER 2 1 2 3 4 5 7 Zone2 Zone2 Main zone Main zone 52 En n Connecting Zone2 speakers using an external amplifier Operating the unit from Zone2 (remote connection) Connect the external amplifier placed in Zone2 to the unit with a stereo pin cable. You can operate the unit or external devices from Zone2 using the remote control supplied with each device if you connect an infrared signal receiver/emitter to the unit’s REMOTE IN/OUT jacks. Notice ▪ Unplug the unit’s power cable from the AC wall outlet before connecting an external amplifier. REMOTE IN/OUT jacks Note IN TRIGGER OUT 12V 0.1A You can connect the speakers placed in Zone2 to the unit with speaker cables. For details, see the following: HDMI OUT ( HDCP2.2 ) IN 2 OUT ▪ “Connecting Zone2 speakers using the unit’s internal amplifier” (p.51) OUT 1 1 ARC REMOTE 2 (1 MOVIE) (5 STB) REMOTE ANTENNA AUDIO 1 ( 2 RADIO ) ( 7 TV ) FM OPTICAL AM AUDIO 2 ( 3 MUSIC ) The unit (rear) OPTICAL AUDIO 3 AV 1 AV 2 COMPONENT VIDEO COAXIAL VIDEO TRIGGER OUT 0.1A HDMI HDMI OUT ( HDCP2.2 ) IN 2 1 OUT 1 ARC (1 MOVIE) 2 COAXIAL Y PR PB AUDIO 4 PHONO 3 ZONE OUT AUDIO 5 ZONE 2 (5 STB) GND TE ANTENNA AUDIO 1 ( 2 RADIO ) ( 7 TV ) FM OPTICAL AM AUDIO 2 ( 3 MUSIC ) OPTICAL AUDIO 3 AV 2 Y PR PB AUDIO 4 PHONO ZONE2 OUT jacks VIDEO COMPONENT VIDEO COAXIAL COAXIAL AV 1 ZONE OUT ZONE 2 AUDIO 5 PRE OUT SUBW FRONT ZONE OUT The unit (rear) ZONE 2 L GND R Infrared signal transmitter External amplifier Audio input (analog stereo) Infrared signal receiver L Q W External device (such as a CD player) R 1 9 2 AUDIO Remote control (supplied with each device) 3 Zone2 4 5 6 7 Main zone Zone2 Main zone Note You can adjust the volume for Zone2 output with the unit. When using an external amplifier with volume control, set “Volume” in the “Setup” menu to “Fixed”. For details, see the following: ▪ “Setting the use of volume adjustments for Zone2 output” (p.121) 53 En An infrared signal transmitter is not required if you are using Yamaha products that support remote connections, as the unit does. You can transmit remote control signals by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an infrared signal receiver. REMOTE IN/OUT jacks 3 Note ▪ Presses NET repeatedly to select a desired network source. REMOTE IN/OUT jacks IN IN OUT OUT REMOTE Use the input selection keys to select an input source. ▪ You cannot select Bluetooth, USB and network sources exclusively for each zone. For example, if you select “SERVER” for Zone2 when “USB” is selected for the main zone, the input source for the main zone also switches to “SERVER”. 4 REMOTE Start playback on the external device or select a radio station. Note Infrared signal receiver ▪ The on-screen operations are not available for Zone2. Use the front display to control Zone2. ▪ AirPlay is available in Zone2 only when AirPlay playback is ongoing in the main zone. Yamaha products (up to six, including the unit) ▪ Press SCENE to select the input source and settings with just one touch using the SCENE function. For details on the SCENE function, see the following: – “Selecting the input source and favorite settings with one touch (SCENE)” (p.73) ▪ To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP repeatedly. The Zone2 output will be disabled after a specified period of time. Remote control ▪ To adjust the Zone2 volume, press VOLUME or MUTE (when using the unit’s internal amplifier). ▪ To enable the Compressed Music Enhancer function, press ENHANCER. ▪ The Zone2 input automatically switches in conjunction with the input source selected in the main zone when “Main Zone Sync” is selected as the Zone2 input. Zone2 ▪ To play back DSD audio in Zone2, select “Main Zone Sync” as the Zone2 input or use the party mode. ▪ Depending on the “Remote Key” setting, the PROGRAM Key may be also available in Zone2. Controlling Zone2 Caution Basic procedure for playing back music in Zone2 is as follows. 1 2 ▪ To avoid unexpected noise, never play back DTS-CDs in Zone2. Set MAIN/ZONE 2 to “ZONE 2”. Press z (receiver power). Each time you press the key, Zone2 output is enabled or disabled. When Zone2 output is enabled, “ZONE2” lights up in the front display. 54 En Enjoying the same source in multiple rooms (party mode) Press PARTY, and then the party mode allows you to play back in Zone2 the same music that is being played back in the main zone. During the party mode, stereo playback is automatically selected for all zones. Utilize this function when you want to use main zone music as background music for a house party. Each time you press the key, the party mode is turned on or off. Note If the party mode does not work on Zone2, set “Party Mode Set” in the “Setup” menu to “Enable”. For details, see the following: ▪ “Setting the use of switching to the party mode on Zone2” (p.124) 55 En PLAYBACK Basic playback procedure Basic procedure for playing back video and music 3 4 Basic procedure for playing back video and music is as follows. 1 2 Turn on the external devices (such as a TV or BD/DVD player) connected to the unit. 2 3 4 5 6 7 8 ▪ To mute the audio output, press MUTE. Press MUTE again to unmute. ▪ Refer to the instruction manual for the external device. TUNER NET RED RE D GGREEN GREE REEEN RE INPUT MAIN Input selection keys ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT SCENE 1 2 3 5 6 7 TUNER NET USB BLUETOOTH 4 8 PRESET INPUT USB BLUETOOTH YEL YELLOW ELLLOW BLUE BLUE PRESET RED TOP MENU GREEN YELLOW HOME BLUE POP-UP /MENU ENHANCER PROGRAM SUR. DECODE VOLUME ENHAN ENHA ENHANCER NCER BASS STRAIGHT MEMORY TUNING BAND TUNING UR. DECODE DECOD DEC ODEE PROG PR PROGRAM OGRA RAM M SSUR. VOLUME BASS BASS VOLUME MUTE STRAIGHT MEM ME MEMORY MOR Y TUNIN TUNING NINGG BAN BAND AND D Press VOLUME to adjust the volume. Note Use the input selection keys to select an input source. 1 Start playback on the external device or select a radio station. TUNIN TUNING NINGG 56 En Selecting an HDMI output jack Currently input source Press HDMI OUT to select the HDMI OUT jacks for video/audio output. AV Each time you press the key, the HDMI OUT jack to be used for signal output changes. AUX OUT AUDIO 2 ECO HDMI OUT 1 HDMI OUT 1+2 Input (input source name), DSP Program (sound mode name), Audio Decoder (decoder name*) PHONO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER Displayed item HDMI Frequency (frequency), DSP Program (sound mode name), Audio Decoder (decoder name*) VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Outputs the same signal at both the HDMI OUT 1 and HDMI OUT 2 jacks. HDMI OUT 1 Output the signals at the HDMI OUT 1 jack. HDMI OUT 2 Output the signals at the HDMI OUT 2 jack. HDMI OUT Off Does not output the signals at the HDMI OUT jacks. TUNER (U.K., Europe, Russia and Middle East models only) Radio Data System data is also available when the unit is tuned into a Radio Data System broadcasting station. For details, see the following: • “Displaying the Radio Data System information” (p.65) Bluetooth Note USB ▪ You can also select an HDMI output jack by selecting a scene. For details, see the following: SERVER – “Selecting the input source and favorite settings with one touch (SCENE)” (p.73) AirPlay ▪ When “HDMI OUT 1+2” is selected, the unit outputs video signals at the highest resolution supported by both TVs (or projectors) connected to the unit. (For example, if you have connected a 1080p TV to the HDMI OUT 1 jack and a 720p TV to the HDMI OUT 2 jack, the unit outputs 720p video signals.) Song (song title), Artist (artist name), Album (album name), DSP Program (sound mode name), Audio Decoder (decoder name*) Song (song title), Artist (artist name), Album (album name), DSP Program (sound mode name), Audio Decoder (decoder name*), IP Address, Ethernet MAC, Wi-Fi MAC NET RADIO Song (song title), Album (album name), Station (station name), DSP Program (sound mode name), Audio Decoder (decoder name*), IP Address, Ethernet MAC, Wi-Fi MAC Switching information on the front display MusicCast Link DSP Program (sound mode name), Audio Decoder (decoder name*), IP Address, Ethernet MAC, Wi-Fi MAC Press INFO on the front panel to select between the various display items on the front display, as shown in the following table. * The name of the audio decoder currently activated is displayed. If no audio decoder is activated, “Decoder Off” appears. OUT Note STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER 2 ECO Audio Decoder Available items vary depending on the selected input source. The displayed item can also be applied separately to each input group which is shown in the table and divided by ruled lines. VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Item About 3 seconds after a display item is selected, its corresponding information appears. STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER OUT 2 ECO †‡ Dsur VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Information 57 En Item names and functions of the playback screen External device operation keys The item names and functions of the playback screen, available when your TV is connected to the unit via HDMI, are as follows. a Resumes playback from pause. s Stops playback. d Stops playback temporarily. f 1 Function g Skips forward/backward. Note ▪ Displayed items vary depending on the content of playback. ▪ Press RETURN to display the browse screen. ▪ When “Video Out” in the “Option” menu is set to except “Off”, you can close the playback screen by pressing the left cursor key. To display the playback screen again, press any cursor key. For details on “Video Out”, see the following: 2 – “Selecting a video source to be output with the selected audio source” (p.83) 1 Status indicators Display the current shuffle/repeat settings, playback status (such as play/pause) and elapsed time. 2 Playback information Displays the artist name, song title and album name. Use the following remote control keys to control playback. MAIN ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT SCENE 1 2 3 5 6 7 TUNER NET 4 8 INPUT ENHAN ENHA ENHANCER NCER USB BLUETOOTH PRESET RED GREEN YELLOW BLUE UR. DECODE DECOD DEC ODEE PROG PR PROGRAM OGRA RAM M SSUR. VOLUME V VOL VO OLUME OLUME LUME BASS BASS TOP MENU HOME POP-UP /MENU ENHANCER PROGRAM SUR. DECODE VOLUME STRAIGHT BASS External device operation keys MEMORY STRAIGHT MEMORY TUNING BAND TUNING TUNIN TUNING NINGG BAND TUNIN TUNING NINGG 58 En Item names and functions of the browse screen Icon Function Moves 10 pages backward. The item names and functions of the browse screen, available when your TV is connected to the unit via HDMI, are as follows. The browse screen appears when the next input source is selected. Moves to the previous page of the list. Moves to the playback screen. • USB Moves to the next page of the list. • SERVER Moves 10 pages forward. • NET RADIO Note ▪ Displayed items vary depending on the content of playback. 1 ▪ When “Video Out” in the “Option” menu is set to except “Off”, you can close the browse screen by pressing the left cursor key. To display the browse screen again, press any cursor key. For details on “Video Out”, see the following: – “Selecting a video source to be output with the selected audio source” (p.83) 2 4 3 1 Status indicators Display the current shuffle/repeat settings. 2 Contents list Displays the list of contents. Use the cursor keys to select an item and press ENTER to confirm the selection. 3 Item number/total 4 Operation menu Use the cursor keys to select an item. Press ENTER to confirm the selection. 59 En Listening to FM/AM radio Setting the frequency steps 4 5 (Asia and General models only) At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM. Depending on your country or region, set the frequency steps to 100 kHz for FM and 10 kHz for AM. 1 2 When holding down STRAIGHT on the front panel, press MAIN ZONE z. z (MAIN ZONE) 3 STRAIGHT Press PROGRAM to select “TU”. LINK MASTER OUT ECO 2 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC TU••••FM50/AM9 Press MAIN ZONE z to set the unit to standby mode and turn it on again. This completes the settings. Set the unit to standby mode. PROGRAM Press STRAIGHT to select “FM100/AM10”. VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR 60 En Selecting a frequency for reception 3 You can tune into a radio station by specifying its frequency. Press TUNING to set a frequency. Hold down the key for about a second to search stations automatically. Note MAIN ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT SCENE The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models. 1 2 3 5 6 7 4 8 ENHAN ENHA ENHANCER NCER INPUT TUNER NET RED GREEN USB BLUETOOTH PRESET 1 YELLOW BLUE UR. DECODE DECOD DEC ODEE PROG PR PROGRAM OGRA RAM M SSUR. Press TUNER to select “TUNER” as the input source. VOLUME V VOL VO O OLUME L LUME UME BASS BASS “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. TOP MENU HOME BAND TUNING POP-UP /MENU ENHANCER PROGRAM SUR. DECODE VOLUME STRAIGHT BASS MEM ME MEMORY MORY STRAIGHT MEMORY LINK MASTER OUT ECO 2 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC FM 87.50MHz 2 TUNING BAND TUNING TUNING BAND TUNING VOL. MUTE VIRTUAL Press BAND to select a band (FM or AM). LINK MASTER OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC FM 98.50MHz VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR On the front display, “TUNED” lights up when the unit is receiving an FM/AM radio station signal. “STEREO” lights up when the unit is receiving a stereo FM radio signal. Note You can watch videos input from external devices while listening to radio. For details, see the following: ▪ “Selecting a video source to be output with the selected audio source” (p.83) 61 En Selecting a preset station 1 Tune into a registered radio station by selecting its preset number. 1 “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. Press TUNER to select “TUNER” as the input source. 2 3 “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. 2 Press TUNER to select “TUNER” as the input source. Press PRESET to select the desired radio station. Press OPTION. Use the cursor keys to select “Preset” and press ENTER. STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER OUT 2 ECO MAIN PURE DIRECT HDMI OUT SCENE 1 2 3 5 6 7 TUNER NET 4 1 2 3 4 5 6 7 8 USB BLUETOOTH TUNER NET PRESET RED GREEN YELLOW BLUE Note INPUT TOP MENU HOME USB To specify the preset number from which to start the registration, press cursor keys or PRESET to select a preset number. BLUETOOTH POP-UP /MENU ENHANCER PROGRAM SUR. DECODE FPL FPR SW SR SL SBL SB SBR The preset number from which to start the registration is displayed on the front display. 8 INPUT VOL. MUTE VIRTUAL Preset ZONE 2 SLEEP PARTY PRESET PRESET VOLUME BASS RED RE D STRAIGHT GGREEN GREE REEEN RE YEL YELLOW ELLLOW BLUE BLUE 4 MEMORY TUNING BAND TUNING To start the Auto Preset process, press ENTER. “SEARCH” appears during Auto Preset LINK MASTER OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC 01:FM 98.50MHz STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER OUT 2 ECO VOL. MUTE VIRTUAL 01:FM 87.50MHz FPL FPR SL SW SR SBL SB SBR VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Preset number from which to start the registration Note “No Presets” appears on the front display when no radio stations are registered. The Auto Preset process starts and “SEARCH” appears during Auto Preset. Registering FM radio stations automatically (FM Auto Preset) Note To cancel the Auto Preset process, press RETURN. When the Auto Preset process finishes, “FINISH” appears on the front display and the “Option” menu closes automatically. Automatically register FM radio stations with strong signals. Note LINK MASTER ▪ You can register up to 40 radio stations as presets. OUT ECO 2 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC Auto Preset ▪ To register AM radio stations, see the following: – “Registering a radio station manually” (p.63) ▪ (U.K., Europe, Russia and Middle East models only) Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function. 62 En VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR Registering a radio station manually 4 Select a radio station manually and register it to a preset number. The first time that you do register a station, the selected radio station will be registered to the preset number “01”. Thereafter, each radio station you select will be registered to the next empty (unused) preset number after the most recently registered number. Note You can register up to 40 radio stations as presets. 1 Hold down MEMORY for a few seconds. Press TUNER to select “TUNER” as the input source. MAIN ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT SCENE “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. 1 2 3 5 6 7 4 8 INPUT TUNER NET RED GREEN ENHAN ENHA ENHANCER NCER USB BLUETOOTH PRESET YELLOW BLUE UR. DECODE DECOD DEC ODEE PROG PR PROGRAM OGRA RAM M SSUR. 2 3 Press BAND to select a band (FM or AM). VOLUME V VOL VO OLUME OLUME LUME BASS BASS TOP MENU HOME POP-UP /MENU ENHANCER PROGRAM SUR. DECODE VOLUME STRAIGHT BASS Press TUNING to set a frequency. MEMORY STRAIGHT MEMORY MEMORY TUNING BAND TUNING TUNIN TUNING NINGG Hold down the key for about a second to search stations automatically. LINK MASTER OUT 2 ECO BAN BAND AND D TUNIN TUNING NINGG STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC 01:FM 98.50MHz VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Preset number Note To select a preset number for registering, press MEMORY once after tuning into the desired radio station, press PRESET to select a preset number, and then press MEMORY again. LINK MASTER OUT 2 ECO 02:Empty STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR “Empty” (not in use) or the frequency currently registered This completes the registers. 63 En Clearing preset stations Clearing all preset stations Clear radio stations registered to the preset numbers. Clear all the radio stations registered to the preset numbers. 1 1 Press TUNER to select “TUNER” as the input source. “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. 2 3 2 3 4 5 Use the cursor keys to select “Preset” and press ENTER. OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL Preset 4 5 “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. Press OPTION. LINK MASTER FPL FPR SW SR SL SBL SB SBR Use the cursor keys to select “CLEAR”. LINK MASTER OUT 2 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC 01:FM 98.50MHz VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Preset station to be cleared If the preset station is cleared, “Cleared” appears and then the next in-use preset number is displayed. 01:Cleared 6 7 Press OPTION. Use the cursor keys to select “Preset” and press ENTER. Use the cursor keys to select “CLEAR ALL”. Use the cursor keys to select “Execute” and press ENTER. If all the preset stations are cleared, “CLEAR ALL” appears and the “Option” menu closes automatically. Use the cursor keys to select a preset station to be cleared and press ENTER. ECO Press TUNER to select “TUNER” as the input source. Repeat step 5 until all desired preset stations are cleared. Press OPTION. This completes the clearing preset stations. 64 En Displaying the Radio Data System information Receiving traffic information automatically (U.K., Europe, Russia and Middle East models only) (U.K., Europe, Russia and Middle East models only) Radio Data System is a data transmission system used by FM stations in many countries. The unit can receive various types of Radio Data System data, such as “Program Service”, “Program Type”, “Radio Text” and “Clock Time”, when it is tuned into a Radio Data System broadcasting station. When “TUNER” is selected as the input source, the unit automatically receives traffic information. To enable this function, perform the following procedure to set the traffic information station. 1 1 2 Tune into the desired Radio Data System broadcasting station. Note We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations. For details, see the following: Note ▪ To search upward/downward from the current frequency, press the cursor keys while “READY” is displayed. Press INFO on the front panel to select between the various display items. OUT ▪ To cancel the search, press RETURN. STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER 2 ECO Program Type Use the cursor keys to select “Traffic Program” and press ENTER. The traffic information station search will start in 5 seconds. Press ENTER again to start the search immediately. ▪ “Registering FM radio stations automatically (FM Auto Preset)” (p.62) 2 When “TUNER” is selected as the input source, press OPTION. The following screen appears for about 3 seconds when the search finishes. VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Item name LINK MASTER OUT About 3 seconds after a display item is selected, its corresponding information appears. OUT 2 Classics VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Traffic information station (frequency) VOL. MUTE VIRTUAL Note FPL FPR SL SW SR SBL SB SBR “TP Not Found” appears for about 3 seconds when no traffic information stations are found. Information Program Service STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC TP FM101.30MHz STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER ECO 2 ECO Program service name Program Type Current program type Radio Text Information on the current program Clock Time Current time DSP Program Sound mode name Audio Decoder Decoder name Frequency Frequency Note “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio station does not provide the Radio Data System service. 65 En Playing back music stored on a Bluetooth® device Playback Bluetooth® device music on the unit 3 You can play back music files stored on a Bluetooth device (such as smartphones) on the unit. On the Bluetooth device, select a song and start playback. The playback screen is displayed on the TV. Note ▪ If the unit detects the Bluetooth device previously connected, the unit automatically connects to the Bluetooth device after Step 1. To establish another Bluetooth connection, first terminate the current Bluetooth connection. ▪ To terminate the Bluetooth connection, perform one of the following operations. The unit Bluetooth device (such as smartphones) – Perform the disconnect operation on the Bluetooth device. – Select an input source other than “Bluetooth” on the unit. Note – Select “Disconnect” in “Audio Receive” in the “Setup” menu. ▪ Use the wireless antennas that are standing upright for connecting to a Bluetooth device wirelessly. For details, see the following: – “Preparing wireless antennas (wireless connection)” (p.34) ▪ To use the Bluetooth function, turn on the Bluetooth function of a Bluetooth device. ▪ To use the Bluetooth function, set “Bluetooth” in the “Setup” menu to “On”. For details, see the following: – “Setting the use of Bluetooth®” (p.120) ▪ For details on supported Bluetooth devices, see the following: – “Supported Bluetooth® devices” (p.167) 1 2 Press BLUETOOTH to select “Bluetooth” as the input source. On the Bluetooth device, select the unit (network name of the unit). A connection between the Bluetooth device and the unit will be made. If the pass key is required, enter the number “0000”. 66 En Playing back music with AirPlay Playback of iTunes/iPhone music contents with AirPlay 3 Select a song and start playback. The unit automatically selects “AirPlay” as the input source and starts playback. The AirPlay allows you to play back iTunes or iPhone/iPad/iPod touch music on the unit via network. The playback screen is displayed on the TV. iTunes Caution Router ▪ When you use iTunes/iPhone controls to adjust volume, the volume may be unexpectedly loud. This could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop playback on the iTunes/iPhone immediately. We recommend volume controls from iTunes/iPhone within the limited range by setting “AirPlay Volume Interlock” in the “Setup” menu. The unit PC Note (Wired network or wireless network) ▪ You can turn on the unit automatically when starting playback on iTunes or iPhone. For details on the settings, see the following: – “Setting the use of the Network Standby function” (p.117) iPhone/iPad/iPod touch ▪ You can edit the network name (the unit’s name on the network) displayed on iTunes/iPhone. For details, see the following: – “Setting the network name of the unit” (p.119) Note ▪ You can adjust the unit’s volume from the iTunes/iPhone during playback. To disable volume controls from iTunes/iPhone, see the following: For details on supported iPhone devices, see the following: ▪ “Supported AirPlay devices” (p.167) 1 2 – “Setting the use of volume control via AirPlay” (p.118) Start iTunes on the PC or display the playback screen on the iPhone. On the iTunes/iPhone, click (tap) the AirPlay icon and select the unit (network name of the unit) as the audio output device. iOS 10 (example) iTunes (example) 67 En Playing back music stored on a USB storage device Playback of USB storage device contents 3 You can play back music files stored on a USB storage device on the unit. Use the cursor keys to select an item and press ENTER. If a song is selected, playback starts and the playback screen is displayed. Note For details on playable USB devices and USB file formats, see the following: Note ▪ “Supported USB devices” (p.167) To return to the top level while on the browse screen, hold down RETURN. ▪ “Supported file formats” (p.168) 1 Note ▪ You can configure the shuffle/repeat settings for playback of contents. For details, see the following: Connect the USB storage device to the USB jack. – “Configuring the shuffle setting” (p.84) – “Configuring the repeat setting” (p.84) The unit (front) 1 INPUT TONE CONTROL 2 3 PROGRAM 4 STRAIGHT (CONNECT) ▪ You can register contents as shortcuts and access them directly. For details, see the following: USB 5V 1A – “Registering a favorite content as shortcut” (p.76) AUX AUDIO USB storage device Note ▪ If the USB storage device contains many files, it may take time to load them. In this case, “Loading…” appears on the front display. ▪ Stop playback of the USB storage device before disconnecting it from the USB jack. ▪ Connect a USB storage device directly to the USB jack of the unit. Do not use extension cables. ▪ The unit cannot charge USB devices while it is in standby mode. 2 Press USB to select “USB” as the input source. The browse screen is displayed on the TV. Note If playback is ongoing on your USB storage device, the playback screen is displayed. 68 En Playing back music stored on media servers (PCs/NAS) Playing back music stored on media servers (PCs/ NAS) Media sharing setup on media servers (PCs/NAS) To play back music files stored on your media servers, first you need to configure the media sharing setting on each music server. You can play back music files stored on your media server on the unit. The setting procedure may vary depending on the media server. The following procedure is a setup example for Windows Media Player 12. Note ▪ You need to configure the media sharing setting on each music server in advance. For details, see the following: Note ▪ For a media server with software except Windows Media Player installed, refer to the instruction manual for the device or software and configure the media sharing settings. – “Media sharing setup on media servers (PCs/NAS)” (p.69) ▪ The setting procedure may vary depending on the view setting of Windows Media Player or the settings of PC. 1 2 3 4 5 ▪ To use this function, the unit and your PC must be connected to the same router. You can check whether the network parameters (such as the IP address) are properly assigned to the unit. For details, see the following: – “Checking the network information on the unit” (p.116) Start Windows Media Player 12 on your PC. ▪ The audio may be interrupted while using the wireless network connection. In this case, use the wired network connection. ▪ For details on playable file formats, see the following: Select “Stream”, then “Turn on media streaming”. – “Supported file formats” (p.168) Click “Turn on media streaming”. 1 Press NET to select “SERVER” as the input source. The browse screen is displayed on the TV. Select “Allowed” from the drop-down list next to the unit’s model name. Note If playback of a music file selected from the unit is ongoing on your PC, the playback screen is displayed. Click “OK” to exit. This completes the settings. 2 Note For details on media sharing settings, refer to Windows Media Player help. 69 En Use the cursor keys to select a music server and press ENTER. 3 Use the cursor keys to select an item and press ENTER. If a song is selected, playback starts and the playback screen is displayed. Note To return to the top level while on the browse screen, hold down RETURN. Note ▪ You can configure the shuffle/repeat settings for playback of contents. For details, see the following: – “Configuring the shuffle setting” (p.84) – “Configuring the repeat setting” (p.84) ▪ You can also use the Digital Media Controller (DMC) to control playback. For details, see the following: – “Setting the use of a Digital Media Controller” (p.118) ▪ You can register contents as shortcuts and access them directly. For details, see the following: – “Registering a favorite content as shortcut” (p.76) 70 En Listening to Internet radio Selecting an Internet radio station Registering favorite Internet radio stations Select an Internet radio station and start playback. You can register the Internet radio station in playback at present to the “Favorites” folder. Note 1 2 ▪ To use this function, the unit must be connected to the Internet. You can check whether the network parameters (such as the IP address) are properly assigned to the unit. For details, see the following: – “Checking the network information on the unit” (p.116) ▪ You may not be able to receive some Internet radio stations. ▪ The unit uses the airable.Radio service. airable is a service of Tune In GmbH. ▪ This service may be discontinued without notice. Press NET to select “NET RADIO” as the input source. When the registering process finishes, the “Option” menu closes automatically. The browse screen is displayed on the TV. 2 Use the cursor keys to select “Add to favorites” and press ENTER. On the playback screen, the current station is added to the “Favorites” folder. On the browse screen, the station selected in the list is added to the “Favorites” folder. ▪ Folder names are different depending on the language. 1 While listening to Internet radio, press OPTION. Note Use the cursor keys to select an item and press ENTER. ▪ Radio stations registered to favorites are displayed with “«”. ▪ To remove a station that is registered to favorites, select the station and then select “Remove from favorites”. If an Internet radio station is selected, playback starts and the playback screen is displayed. ▪ You can register Internet radio stations as shortcuts and access them directly. For details, see the following: Note To return to the top level while on the browse screen, hold down RETURN. – “Registering a favorite content as shortcut” (p.76) 71 En Listening to music streaming services Listening to a streaming service You can listen to a streaming service with the MusicCast CONTROLLER on your mobile device. On the MusicCast CONTROLLER screen, select the room name that was specified for the unit, and then select the streaming service to be tuned into by its station name. For details, see the MusicCast CONTROLLER app. Note ▪ Service is limited to certain areas. ▪ Services supported with the unit may not be available depending upon some regions where the unit is purchased. ▪ Service may change or be discontinued without notice. ▪ After registering the unit in the MusicCast CONTROLLER app, you can use the streaming service. For details, see the following: – “Adding the unit to the MusicCast network” (p.44) ▪ To use this function, the unit must be connected to the Internet. You can check whether the network parameters (such as the IP address) are properly assigned to the unit. For details, see the following: – “Checking the network information on the unit” (p.116) ▪ For details on music streaming services, see the supplements for streaming services. Access the Yamaha Downloads site to download the supplement. http://download.yamaha.com/ 72 En Useful playback functions SCENE function 2 MAIN n Selecting the input source and favorite settings with To select a desired SCENE name, press ENTER. ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT SCENE one touch (SCENE) 1 2 3 5 6 7 TUNER NET 4 8 INPUT USB PRESET RED The SCENE function allows you to select the following settings with just one touch. GREEN MAIN MAI N BLUETOOTH YELLOW BLUE ZONE 2 SLEEP PARTYY PART PPURE URE DIRE DIRECT DIR ECT HDMI OUT OUT • Input source TOP MENU • Registered content HOME SCENE POP-UP /MENU ENHANCER PROGRAM SUR. DECODE VOLUME BASS • Sound program 1 2 3 4 5 6 7 8 SCENE STRAIGHT MEMORY TUNING • Pure Direct On/Off • Compressed Music Enhancer On/Off BAND TUNING INPUT • HDMI output jack Note You can register eight SCENE functions that are assigned to eight SCENE keys on the remote control respectively. ▪ To cancel the operation of selecting a registered scene, press RETURN. ▪ The operation is canceled automatically when you have not operated the unit for the 30 seconds. n Selecting a registered scene Press numbered key (1 to 8), and then the input source and settings registered to the corresponding scene are directly selected. The unit turns on automatically when it is in standby mode. Note To control Zone2, set MAIN/ZONE 2 to “ZONE 2”. Alternatively, you can also select a registered scene by pressing SCENE repeatedly. 1 Press SCENE repeatedly. The SCENE name appears on the front display and on the TV. 73 En Zone2 By default, the following settings are registered for each scene. Main Zone SCENE SCENE 1 2 3 4 SCENE name Movie Viewing Radio Listening Music Listening NET Audio Listening Input HDMI1 TUNER NET RADIO HDMI output HDMI OUT 1+2 HDMI OUT 1+2 HDMI OUT 1+2 HDMI OUT 1+2 Sound program Sci-Fi 7ch Stereo STRAIGHT 7ch Stereo Pure Direct Off Off Off Off Compressed Music Enhancer Off On Off On SCENE 5 AUDIO2 6 7 1 2 3 Input AV 1 TUNER AUDIO2 NET RADIO Volume -40.0 dB -40.0 dB -40.0 dB -40.0 dB Tone Control Auto Auto Auto Auto SCENE 5 6 4 7 8 Input AUDIO3 AUDIO4 AUDIO1 SERVER Volume -40.0 dB -40.0 dB -40.0 dB -40.0 dB Tone Control Auto Auto Auto Auto Note ▪ You can also select a registered scene 1 to 4 by pressing SCENE numbered key (1 to 4) on the front panel. 8 SCENE name STB Viewing Game Playing TV Viewing Media Server Listening Input HDMI2 HDMI3 AUDIO1 SERVER HDMI output HDMI OUT 1+2 HDMI OUT 1+2 HDMI OUT 1+2 HDMI OUT 1+2 Sound program Drama Action Game Drama 7ch Stereo Pure Direct Off Off Off Off Compressed Music Enhancer Off Off On On ▪ For details on the settings, see the following: – “Selecting items to be included as the scene assignments” (p.111) 74 En n Registering a scene 2 You can change the default setting and register the function that is assigned to each numbered key (1 to 8). Hold down the desired numbered key (1 to 8) until “SET Complete” appears on the front display or on the TV. STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER OUT 2 ECO Note SET Complete ▪ We recommend registering the scene with playing back the content that you want to register. FPL FPR SL SW SR SBL SB SBR This completes the registers. ▪ To control Zone2, set MAIN/ZONE 2 to “ZONE 2”. 1 VOL. MUTE VIRTUAL Note Perform the following operations to prepare the settings you want to assign to a scene. ▪ For details on the settings, see the following: – “Enjoying sound field effects optimized for the type of content” (p.46) ▪ Select an input source – “Enjoying pure high fidelity sound (Pure Direct)” (p.48) – “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.49) ▪ Select the assigned radio station or content (when “NET”, “USB”, “Bluetooth” or “TUNER” is selected for the input source only) – “Selecting an HDMI output jack” (p.57) ▪ You can configure more detailed scene assignments in “Scene” in the “Setup” menu. For details, see the following: ▪ Select a sound Program, straight decode or Pure Direct – “Selecting items to be included as the scene assignments” (p.111) ▪ Enable/disable Compressed Music Enhancer ▪ You can change the SCENE name displayed on the front display or on the TV. For details, see the following: ▪ Select an HDMI output jack – “Renaming the SCENE name” (p.112) 75 En Shortcut function 2 Hold down MEMORY for a few seconds. MAIN n Registering a favorite content as shortcut ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT SCENE You can register favorite Bluetooth, USB, media server and network content as shortcuts and access them directly by selecting the shortcut numbers. 1 2 3 5 6 7 TUNER NET 4 8 INPUT ENHAN ENHA ENHANCER NCER USB BLUETOOTH PRESET RED GREEN YELLOW BLUE UR. DECODE DECOD DEC ODEE PROG PR PROGRAM OGRA RAM M SSUR. Note ▪ You can register up to 40 contents as shortcuts. TOP MENU HOME POP-UP /MENU ENHANCER PROGRAM SUR. DECODE ▪ You can also use the “Favorites” feature to register Internet radio stations. For details, see the following: VOLUME STRAIGHT BASS MEMORY STRAIGHT MEMORY MEMORY – “Registering favorite Internet radio stations” (p.71) TUNING BAND TUNING TUNIN TUNING NINGG ▪ The unit registers Bluetooth or AirPlay as an input source. No individual content can be registered. 1 VOLUME V VOL VO OLUME OLUME LUME BASS BASS Play back a song or a radio station to be registered. LINK MASTER OUT 2 ECO BAN BAND AND D TUNIN TUNING NINGG STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL 01:Empty FPL FPR SL SW SR SBL SB SBR Shortcut number (flashes) “MEMORY” appears on the front display and the shortcut number to which the item will be registered blinks. Note To change a shortcut number to which the item will be registered, use PRESET to select the shortcut number after step 2. LINK MASTER OUT 2 ECO 02:Empty STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR “Empty” (not in use) or item currently registered 3 Press MEMORY. The registered shortcut number and “Memorized” appear on the front display. This completes the registers. 76 En n Recalling a registered content as shortcut Note Recall a registered content (Bluetooth, USB, media server and network content) by selecting the shortcut number. ▪ The registered item cannot be recalled in the following cases. ▪ “No Presets” appears on the front display when no items are registered. – A USB storage device which contains the registered item is not connected to this unit. – A PC which contains the registered item is turned off or not connected to the network. Note – The registered network content is temporarily unavailable or out of service. You can register up to 40 contents as shortcuts. 1 – The registered item (file) has been deleted or moved to another location. – A Bluetooth connection cannot be established. Press BLUETOOTH, NET or USB. MAIN ▪ When you register music files stored on a USB storage device or a media server (PC/NAS), this unit memorizes the relative position of the music files in the folder. If you have added or deleted any music files to or from the folder, this unit may not recall the music file correctly. In such cases, register the items again. ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT SCENE 1 2 3 5 6 7 4 8 INPUT TUNER NET USB 5 6 7 8 ▪ The registered content (songs and Internet radio stations) can be displayed as a list and easily removed by using MusicCast CONTROLLER on your mobile device. For details, see the following: BLUETOOTH PRESET RED GREEN YELLOW BLUE INPUT TOP MENU TUNER NET RED RE D GGREEN GREE REEEN RE USB BLUETOOTH POP-UP /MENU HOME ENHANCER PROGRAM SUR. DECODE PRESET NET USB BLUETOOTH – “Using MusicCast CONTROLLER” (p.44) VOLUME BASS YEL YELLOW ELLLOW BLUE BLUE STRAIGHT MEMORY TUNING 2 BAND TUNING Press PRESET to select a desired content. MAIN ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT SCENE 1 2 3 4 5 6 7 8 INPUT TUNER NET RED GREEN USB BLUETOOTH 1 2 3 4 5 6 7 8 TUNER NET PRESET YELLOW BLUE INPUT TOP MENU HOME USB BLUETOOTH POP-UP /MENU ENHANCER PROGRAM SUR. DECODE PRESET PRESET VOLUME BASS RED RE D STRAIGHT GGREEN GREE REEEN RE YEL YELLOW ELLLOW BLUE BLUE MEMORY TUNING BAND TUNING LINK MASTER OUT 2 ECO 01:USB STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Playback of the selected content starts. 77 En Configuring playback settings for different playback sources (Option menu) Basic operation of the Option menu 3 4 Perform the following basic procedure to operate the “Option” menu. With the “Option” menu, you can configure different playback settings according to the input source currently being played back. 1 MAIN For details on the default settings, see the following: ZONE 2 SLEEP PURE DIRECT ▪ “Default settings of the Option menu” (p.178) HDMI OUT SCENE 1 2 3 4 5 6 7 8 INPUT TUNER NET RED GREEN USB BLUETOOTH OPTION PRESET TOP MENU YELLOW HOME BLUE POP-UP /MENU ENHANCER PROGRAM SUR. DECODE VOLUME BASS STRAIGHT MEMORY TUNING BAND TUNING TOP MENU POP-UP / /MENU HOME R LINK MASTER OUT 2 STEREO M TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC ECO Tone Control Front display VOL. MUTE VIRTUAL SS FPL FPR SL SW SR SBL SB SBR T Y G G TV screen 2 Press OPTION. This completes the settings. Note Press OPTION. PARTY Use the cursor keys to select a setting. Use the cursor keys to select an item and press ENTER. 78 En Option menu items Item Shuffle / Repeat (Shuffle / Repeat) Use the following table to configure playback settings of the unit. Note FM Mode (FM Mode) ▪ Available items vary depending on the selected input source. ▪ When the input icon is displayed on the upper right of the “Option” menu, the setting is applied to the currently selected input source. Otherwise, the setting is applied to all of the input sources. ▪ Text in parentheses denotes indicators on the front display. ▪ Depending on the region of purchase, some menu items for audio streaming services are also available. Item Function Tone Control (Tone Control) Adjusts the level of high-frequency range and lowfrequency range individually. p.79 Enables/disables YPAO Volume. p.80 Sets whether the dynamic range (from maximum to minimum) is automatically adjusted to the volume. p.80 Dialogue Level (Dialog Lvl) Adjusts the volume of dialogue sounds. p.81 DTS Dialogue Control (DTS Dialog) Adjusts the volume of dialogue sounds for DTS:X contents. p.81 Dialogue Lift (Dialog Lift) Adjusts the perceived height of dialogue sounds for the screen position. p.81 Lipsync (Lipsync) Lipsync (Lipsync) Adjusts the delay between video and audio output manually. p.82 Enhancer (Enhancer) Enhancer (Enhancer) Enables/disables Compressed Music Enhancer. p.82 Input Trim (In.Trim) Corrects volume differences between input sources. p.82 YPAO Volume YPAO Volume (YPAO Vol.) (YPAO Adaptive DRC Volume) (A.DRC) Dialogue (Dialog) Volume Trim (Volume Trim) Subwoofer Trim Fine-adjusts the subwoofer volume. (SW.Trim) Preset (Preset) Enables/disables Extra Bass. p.83 Video Processing (Video Process.) Video Mode (V.M) Enables/disables the video signal processing settings configured in the “Setup” menu. p.83 Video Out (Video Out) Video Out (V.Out) Selects a video to be output with the selected audio source. p.83 Repeat (Repeat) Configures the repeat setting. p.84 FM Mode (Mode) Switches between “Stereo” and “Monaural” for FM radio reception. p.84 FM Auto Preset (AUTO) Automatically registers FM radio stations with strong signals as presets. p.85 Clear Preset (CLEAR) Clears radio stations registered to preset numbers. p.86 p.86 Add to favorites (Add to Fav.) Adds your favorite Internet radio station to the “Favorites” folder. p.87 Remove from favorites (RemovefromFav.) Removes it from the “Favorites” folder. p.87 Traffic Program (TrafficProgram) On-screen Information (U.K., Europe, Russia and Middle East models only) Automatically searches for a traffic information station. p.87 Displays the current status information. p.88 Adjusting the tone of the audio output Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually. Option menu “Tone Control” Choices Treble, Bass p.82 Extra Bass (Extra Bass) Page p.84 Clear All Preset Clears all the radio stations registered to preset (CLEAR ALL) numbers. Page Extra Bass (Extra Bass) Function Shuffle (Shuffle) Configures the shuffle setting. Setting range -6.0 dB to +6.0 dB (0.5 dB increments) Note ▪ When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears. ▪ You can also adjust the tone with the front panel controls. Press TONE CONTROL to select “Treble” or “Bass”, then press PROGRAM to make an adjustment. ▪ If you set an extreme value, sounds may not match those from other channels. 79 En n Adjusting the dynamic range automatically Configuring the volume automatically based on the YPAO measurement results Sets whether the dynamic range (from maximum to minimum) is automatically adjusted to the volume when “YPAO Volume” is set to “On”. When “Adaptive DRC” is set to “On”, it is useful for listening to playback at a low volume at night. n Adjusting the high- and low-frequency levels Option menu automatically according to the volume “YPAO Volume” > “Adaptive DRC” Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and lowfrequency levels are automatically adjusted according to the volume so that you can enjoy natural sounds even at low volume. YPAO Volume works effectively after the YPAO measurement. For details, see the following: Settings • “Optimizing the speaker settings automatically (YPAO)” (p.38) Off The dynamic range is not automatically adjusted. On Automatically adjusts the dynamic range. Note Option menu “YPAO Volume” > “YPAO Volume” We recommend enabling both “YPAO Volume” and “Adaptive DRC” when you are listening at lower volumes or at night. For details on “YPAO Volume”, see the following: Settings ▪ “Adjusting the high- and low-frequency levels automatically according to the volume” (p.80) Off Disables YPAO Volume. On Enables YPAO Volume. Note We recommend enabling both “YPAO Volume” and “Adaptive DRC” when you are listening at lower volumes or at night. For details on “Adaptive DRC”, see the following: ▪ “Adjusting the dynamic range automatically” (p.80) 80 En n Adjusting the perceived height of dialogue sound Adjusting the volume or perceive height of dialogue sounds Adjusts the perceived height of dialogue sounds when the position (height) of dialogue sound is artificial. If the dialogue sounds as if it is coming from below the screen, you can raise its perceived height by increasing this setting. n Adjusting the volume of dialogue sound Note Adjusts the volume of dialogue sounds that are hardly heard. This setting is available only when one of the following conditions is met. ▪ One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when presence speakers are used. Option menu “Dialogue” > “Dialogue Level” ▪ Virtual Presence Speaker (VPS) is working. (You may hear dialogue sounds from the surround speakers depending on the listening position.) Setting range 0 to 3 (higher to strengthen) Option menu Note “Dialogue” > “Dialogue Lift” This setting is not available when one of the following conditions is met. Setting range ▪ Dolby Atmos content or DTS:X content is played back. 0 to 5 (The bigger the value the higher the position) ▪ The Dolby Surround or Neural:X decoder is working. n Adjusting the volume of dialogue sound during DTS:X™ Ideal position playback Adjusts the volume of dialogue sounds that are hardly heard for DTS:X content. Option menu “Dialogue” > “DTS Dialogue Control” Setting range 0 to 6 (higher to strengthen) Note This setting is available only when DTS:X content which supports the DTS Dialogue Control feature is played back. 81 En Adjusting the delay of the Lipsync function Correcting volume differences during playback Adjusts the delay between video and audio output manually when “Delay Enable” in the “Setup” menu is set to “Enable”. n Correcting volume differences between input sources Option menu “Lipsync” > “Lipsync” Corrects volume differences between input sources. If you are bothered by volume differences when switching between input sources, use this function to correct it. Setting range Option menu 0 ms to 500 ms (1 ms increments) “Volume Trim” > “Input Trim” Setting range Note -6.0 dB to +6.0 dB (0.5 dB increments) For details on “Delay Enable” in the “Setup” menu, see the following: ▪ “Enabling Lipsync adjustment” (p.101) Note This setting is applied separately to each input source. Setting Compressed Music Enhancer n Adjusting the subwoofer volume Enables/disables Compressed Music Enhancer. Fine-adjusts the subwoofer volume. Option menu Option menu “Enhancer” > “Enhancer” “Volume Trim” > “Subwoofer Trim” Settings Off Disables Compressed Music Enhancer. On Enables Compressed Music Enhancer. Setting range -6.0 dB to +6.0 dB (0.5 dB increments) Note ▪ This setting is applied separately to each input source. ▪ You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer. ▪ For details on Compressed Music Enhancer, see the following: – “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.49) 82 En Setting the use of Extra Bass Enabling the video signal processing Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. Enables/disables the video signal processing (resolution and aspect ratio) settings configured in “Resolution” and “Aspect” in the “Setup” menu. For details, see the following: Option menu • “Setting a resolution to output HDMI video signals” (p.113) “Extra Bass” > “Extra Bass” • “Setting an aspect ratio to output HDMI video signals” (p.114) Settings Option menu Off Disables Extra Bass. On Enables Extra Bass. “Video Processing” > “Video Mode” Settings Note You can also use BASS on the remote control to enable/disable Extra Bass. Direct Disables the video signal processing. Processing Enables the video signal processing. Selecting a video source to be output with the selected audio source Selects a video source to be output together with the selected audio source. For example, you can watch the video from a different source while listening to the radio. Option menu “Video Out” > “Video Out” Input sources AUX, AUDIO 1-5, PHONO, TUNER, (network sources), AirPlay, MusicCast Link, SERVER, NET RADIO, Bluetooth, USB Settings 83 Off Does not output video. HDMI 1-5, AV 1-2 Outputs video input through the corresponding video input jacks. En Configuring the shuffle/repeat setting Switching between stereo and monaural for FM radio reception n Configuring the shuffle setting Configure the shuffle setting for playback. Switch between stereo and monaural for FM radio reception. When the signal reception for an FM radio station is unstable, switching to monaural may improve it. Option menu Option menu “Shuffle / Repeat” > “Shuffle” “FM Mode” > “FM Mode” Settings Settings Off Turns off the shuffle function. Stereo Enables stereo for FM radio reception. On Plays back songs in the current album (folder) in random order. Monaural Enables monaural for FM radio reception. Note This setting is available only when “USB” or “SERVER” is selected as the input source. n Configuring the repeat setting Configure the repeat setting for playback. Option menu “Shuffle / Repeat” > “Repeat” Settings Off Turns off the repeat function. One Plays back the current song repeatedly. All Plays back all songs in the current album (folder) repeatedly. Note This setting is available only when “USB” or “SERVER” is selected as the input source. 84 En Setting presets for radio stations 4 n Registering FM radio stations automatically “SEARCH” appears during Auto Preset OUT 2 ECO 01:FM 87.50MHz Note ▪ To register AM radio stations, see the following: Note Option menu To cancel the Auto Preset process, press RETURN. “Preset” > “FM Auto Preset” When the Auto Preset process finishes, “FINISH” appears on the front display and the “Option” menu closes automatically. Press TUNER to select “TUNER” as the input source. LINK MASTER OUT ECO “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. Use the cursor keys to select “Preset” and press ENTER. OUT 2 Preset 2 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC Auto Preset Press OPTION. LINK MASTER FPL FPR SL SW SR SBL SB SBR The Auto Preset process starts and “SEARCH” appears during Auto Preset. – “Registering a radio station manually” (p.63) ▪ (U.K., Europe, Russia and Middle East models only) Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function. ECO VOL. MUTE VIRTUAL Preset number from which to start the registration ▪ You can register up to 40 radio stations as presets. 2 3 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER Automatically register FM radio stations with strong signals. 1 To start the Auto Preset process, press ENTER. STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR The preset number from which to start the registration is displayed on the front display. Note To specify the preset number from which to start the registration, press cursor keys or PRESET to select a preset number. 85 En VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR n Clearing preset stations n Clearing all preset stations Clear radio stations registered to the preset numbers. Clear all the radio stations registered to the preset numbers. Option menu Option menu “Preset” > “Clear Preset” “Preset” > “Clear All Preset” 1 1 Press TUNER to select “TUNER” as the input source. “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. “TUNER” is selected as the input source and the frequency currently selected is displayed on the front display. 2 3 Use the cursor keys to select “Preset” and press ENTER. OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC VOL. MUTE VIRTUAL Preset 4 5 2 3 4 5 Press OPTION. LINK MASTER FPL FPR SW SR SL SBL SB SBR Use the cursor keys to select “CLEAR”. LINK MASTER OUT 2 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC 01:FM 98.50MHz VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Preset station to be cleared If the preset station is cleared, “Cleared” appears and then the next in-use preset number is displayed. 01:Cleared 6 7 Press OPTION. Use the cursor keys to select “Preset” and press ENTER. Use the cursor keys to select “CLEAR ALL”. Use the cursor keys to select “Execute” and press ENTER. If all the preset stations are cleared, “CLEAR ALL” appears and the “Option” menu closes automatically. Use the cursor keys to select a preset station to be cleared and press ENTER. ECO Press TUNER to select “TUNER” as the input source. Repeat step 5 until all desired preset stations are cleared. Press OPTION. This completes the clearing preset stations. 86 En Receiving traffic information automatically Adding an Internet radio station to the “Favorites” folder (U.K., Europe, Russia and Middle East models only) When “TUNER” is selected as the input source, the unit automatically searches for a traffic information station. Register the currently playing Internet radio station to the “Favorites” folder. Option menu Option menu “Add to favorites” 1 2 “Traffic Program” While listening to Internet radio, press OPTION. 1 2 Use the cursor keys to select “Add to favorites” and press ENTER. Note Removing an Internet radio station from the “Favorites” folder ▪ To search upward/downward from the current frequency, press the cursor keys while “READY” is displayed. ▪ To cancel the search, press RETURN. Remove an Internet radio station from the “Favorites” folder. The following screen appears for about 3 seconds when the search finishes. Option menu “Remove from favorites” 2 3 Use the cursor keys to select “Traffic Program” and press ENTER. The traffic information station search will start in 5 seconds. Press ENTER again to start the search immediately. When the registering process finishes, the “Option” menu closes automatically. 1 When “TUNER” is selected as the input source, press OPTION. LINK MASTER OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC TP FM101.30MHz Use the cursor keys to select the station to be removed from the “Favorites” folder. VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Traffic information station (frequency) Note Press OPTION. “TP Not Found” appears for about 3 seconds when no traffic information stations are found. Use the cursor keys to select “Remove from favorites” and press ENTER. When the removing process finishes, the “Option” menu closes automatically. 87 En Checking the current status information Displays the current status information as follows. Option menu “On-screen Information” 1 2 Press OPTION. Use the cursor keys to select “On-screen Information” and press ENTER. The following information is displayed on the TV. Input source/Party mode status Audio format 3 CINEMA DSP status Decoder Volume/YPAO Volume status Sound mode To close the information display, press RETURN. Note ▪ You can use the PROGRAM key on the remote control for displaying the status information on the TV. For details, see the following: – “Setting the function for the PROGRAM key on the remote control” (p.129) ▪ Use the left/right cursor keys to display other informations in the “Setup” menu on the TV. 88 En CONFIGURATIONS Configuring various functions (Setup menu) Basic operation of the Setup menu 2 Use the cursor keys to select a menu and press ENTER. Perform the following basic procedure to operate the “Setup” menu. You can configure the unit’s various functions with the “Setup” menu. Note ▪ If new firmware is available, the message screen appears. ▪ If new firmware is available, the envelope icon (p) appears in the screen. ▪ For details on firmware updating, see the following: – “Firmware updates” (p.151) 1 Press SETUP. MAIN ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT SCENE 1 2 3 5 6 7 4 8 3 4 5 INPUT TUNER NET RED GREEN USB BLUETOOTH SETUP PRESET TOP MENU YELLOW HOME BLUE POP-UP /MENU ENHANCER PROGRAM SUR. DECODE VOLUME BASS STRAIGHT MEMORY TUNING BAND TUNING TOP MENU POP-UP /MENU / HOME Use the cursor keys to select a setting and press ENTER. Press SETUP. This completes the settings. R Note For details on the default settings, see the following: M ▪ “Default settings of the Setup menu” (p.178) SS T Y G Use the cursor keys to select an item and press ENTER. G 89 En Setup menu items Use the following table to configure various functions of the unit. Menu Item Function Power Amp Assign Selects a speaker system. Page p.94 Front Selects the size of the front speakers. p.94 Center Selects whether or not a center speaker is connected and its size. p.95 Surround Selects whether or not surround speakers are connected and their size. p.95 Surround Back Selects whether or not surround back speakers are connected and their size. p.96 Front Presence Selects whether or not presence speakers are connected and their size. p.97 Subwoofer Selects whether or not a subwoofer is connected. p.98 Sets the distance between each speaker and listening position. p.98 Level Adjusts the volume of each speaker. p.99 Parametric EQ Adjusts the tone with an equalizer. p.99 Test Tone Enables/disables the test tone output. p.100 Configuration Speaker Distance YPAO Result Checks and Reloades the previous YPAO adjustments. p.100 Information Displays information about the current audio signal. p.101 Delay Enable Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select”. p.101 Auto/Manual Select Selects the method to adjust the delay between video and audio output. p.102 Adjustment Adjusts the delay between video and audio output manually. p.102 p.104 Lipsync Sound DSP Parameter DSP Level Adjusts the sound field effect level. Initial Delay Adjusts the delay between the direct sound and presence sound field generation. p.104 Room Size Adjusts the broadening effect of the presence sound field. p.104 Liveness Adjusts the loss of the presence sound field. p.105 Reverb Time Adjusts the decay time of the rear reverberant sound. p.105 Reverb Delay Adjusts the delay between the direct sound and reverberant sound generation. p.105 Reverb Level Adjusts the volume of the reverberant sound. p.105 Surround Initial Delay Adjusts the delay between the direct sound and surround sound field generation. p.106 Surround Room Size Adjusts the broadening effect of the surround sound field. p.106 Surround Liveness Adjusts the loss of the surround sound field. p.106 Surround Back Initial Delay Adjusts the delay between the direct sound and surround back sound field generation. p.106 Surround Back Room Size Adjusts the broadening effect of the surround back sound field. Surround Back Liveness Adjusts the loss of the surround back sound field. 90 En p.107 p.107 Menu Item Surround Decoder 7ch Stereo Sound Function Selects a surround decoder to be used in combination with the selected sound program. p.107 Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played. p.108 Center Image Adjusts the center localization (broadening effect) of the front sound field. p.108 Level Adjusts the entire volume for “7ch Stereo”. p.108 p.108 Front / Rear Balance Adjusts the front and rear volume balance for “7ch Stereo”. Left / Right Balance Adjusts the left and right volume balance for “7ch Stereo”. p.108 Height Balance Adjusts the height volume balance using the presence speakers for “7ch Stereo”. p.109 Enables/disables monaural sound output for “7ch Stereo”. p.109 Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. p.109 Max Volume Sets the limit value of the volume. p.109 Initial Volume Sets the initial volume for when this receiver is turned on. p.110 Monaural Mix Dynamic Range Volume Adaptive DSP Level Virtual Speaker Scene VSBS Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted. p.110 Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. p.110 Scene Setting Selects items to be included as the scene assignments. p.111 Scene Rename Renames the scene name displayed on the front display or TV screen. p.112 Information Video Mode Video Mode Video/HDMI Page Decode Type HDMI Control Displays information about the current video signal and the TVs connected to the HDMI OUT jacks. p.113 Enables/disables the video signal processing. p.113 Resolution Selects a resolution to output HDMI video signals. p.113 Aspect Selects an aspect ratio to output HDMI video signals. p.114 p.114 HDMI Control Enables/disables HDMI Control. TV Audio Input Selects an audio input jack of the unit to be used for TV audio input. p.114 ARC Enables/disables ARC. p.114 Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit. p.115 HDMI Audio Output Enables/disables the audio output from a TV. p.115 HDCP Version Selects the version of HDCP used on the HDMI input jacks. p.115 HDMI Standby Through Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. p.115 91 En Menu Network Bluetooth Item Function Information Displays the network information on the unit. p.116 Network Connection Selects the network connection method. p.116 IP Address Configures the network parameters (such as IP address). p.117 Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. p.117 MAC Address Filter Filter Sets the MAC address filter to limit access to the unit from other network devices. p.118 MAC Address Sets the MAC address of the network device that is permitted to access the unit. p.118 DMC Control Selects whether to allow a Digital Media Controller (DMC) to control playback. p.118 AirPlay Volume Interlock Enables/disables volume controls from iTunes/iPhone via AirPlay. p.118 Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. p.119 MusicCast Link Power Interlock Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the power of other devices of the network. p.119 Bluetooth Audio Receive Enables/disables the Bluetooth functions. p.120 Disconnect Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. p.120 Bluetooth Standby Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). p.120 Displays information about Zone2. p.121 Information Multi Zone Page Zone2 Volume Enables/disables volume adjustments for Zone2 output. p.121 Max Volume Sets the Zone2 limit value of the volumes. p.121 Initial Volume Sets the Zone2 initial volume for when the unit is turned on. p.122 Audio Delay Adjusts the audio output timing for Zone2. p.122 Monaural Switches between stereo and monaural for Zone2 output. p.122 Enhancer Enables/disables Compressed Music Enhancer for Zone2 output. p.123 Tone Control Adjusts the level of high-frequency range and low-frequency range for Zone2 output. p.123 Extra Bass Enables/disables Extra Bass for Zone2 output. p.123 Left / Right Balance Adjusts the volume balance for Zone2 output. p.123 Changes the zone name displayed on the TV screen. p.124 Enables/disables switching to the party mode. p.124 Zone Rename Party Mode Set Target : Zone2 92 En Menu Item Function Information Displays the system information on the unit. p.125 Language Selects an on-screen menu language. p.125 Audio In Combines the video jack of the selected input source with an audio jack of others. p.126 Input Skip Sets which input source is skipped when operating the INPUT key. p.127 Input Rename Changes the input source name displayed on the front display. p.128 Auto Play Enables/disables Auto Play function in streaming services, Internet radio, media servers (PCs/NAS), Bluetooth and USB. p.129 Sets which sound programs are skipped when operating the PROGRAM key. p.129 PROGRAM Key Sets the function for the PROGRAM key on the remote control. p.129 Color Key Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control. p.130 Dimmer (Front Display) Adjusts the brightness of the front display. p.130 Volume Switches the scale of the volume display. p.130 DSP Skip Remote Key System Display Set Trigger Output ECO Page Short Message Selects whether to display short messages on the TV screen when the unit is operated. p.130 Wallpaper Selects the image to be used as wallpaper on the TV screen. p.130 p.131 Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. p.131 Auto Power Standby Sets the amount of time for the auto-standby function. p.132 ECO Mode Enables/disables the eco mode (power saving mode). p.132 Memory Guard Prevents accidental changes to the settings. p.132 Firmware Update Updates the firmware via the network. p.133 93 En Configuring the speaker settings Setting your speaker system Setting the size of the front speakers Select the setting according to the speakers that are connected. Selects the setting according to the size of your front speakers. Setup menu Setup menu “Speaker” > “Power Amp Assign” “Speaker” > “Configuration” > “Front” Settings Settings Select this option for small speakers. Basic Select this option when you use a normal speaker system (not using Zone2 speakers or a bi-amp connection). 7.1 +1Zone Select this option when you use Zone2 speakers in addition to the 7.1 system in the main zone. 5.1.2 +1Zone Select this option when you use Zone2 speakers in addition to the 5.1.2 system in the main zone. Large 5.1 BI-Amp Select this option when you connect speakers that support bi-amp connections. Note Small The subwoofer will produce front channel low-frequency components (configurable in “Crossover”). Select this option for large speakers. The front speakers will produce all of the front channel frequency components. ▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your speaker is 16 cm (6‑1/4”) or larger, or “Small” if it is smaller than 16 cm (6‑1/4”). Note For details on the speaker system, see the following: ▪ “Front” is automatically set to “Large” when “Subwoofer” is set to “None”. For details on “Subwoofer” in the “Setup” menu, see the following: ▪ “Connecting front speakers that support bi-amp connections” (p.28) ▪ “Connecting Zone2 speakers using the unit’s internal amplifier” (p.51) – “Setting the use of a subwoofer” (p.98) 94 En Setting the use of a center speaker and its size Setting the use of surround speakers and their size Selects the setting according to the use and size of your center speaker. Selects the setting according to the use and size of your surround speakers. Setup menu Setup menu “Speaker” > “Configuration” > “Center” “Speaker” > “Configuration” > “Surround” Settings Settings Select this option for small speakers. Small Select this option for small speakers. Small The subwoofer or front speakers will produce center channel lowfrequency components (configurable in “Crossover”). Select this option for large speakers. Large None The subwoofer or front speakers will produce surround channel lowfrequency components (configurable in “Crossover”). Select this option for large speakers. Large The center speaker will produce all of the center channel frequency components. Select this option when no center speaker is connected. The surround speakers will produce all of the surround channel frequency components. Select this option when no surround speakers are connected. None The front speakers will produce center channel audio. Note The front speakers will produce surround channel audio. Virtual CINEMA DSP works in this case. Note When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”). ▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”). ▪ For details on Virtual CINEMA DSP, see the following: – “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.46) 95 En Selects a surround speaker layout when surround speakers are used. Setting the use of surround back speakers and their size Setup menu Selects the setting according to the use and size of your surround back speakers. Setting the layout of the surround speakers “Speaker” > “Configuration” > “Surround” > “Layout” Setup menu Settings “Speaker” > “Configuration” > “Surround Back” Rear Select this option when surround speakers are placed on the rear side of the room. Front Select this option when surround speakers are placed on the front side of the room. Virtual CINEMA FRONT works in this case. Settings Select this option for small speakers. Small Note The subwoofer or front speakers will produce surround back channel lowfrequency components (configurable in “Crossover”). Select this option for large speakers. Large ▪ This setting is not available when “Surround” is set to “None”. For details, see the following: – “Setting the use of surround speakers and their size” (p.95) ▪ For details on Virtual CINEMA FRONT, see the following: The surround back speakers will produce all of the surround back channel frequency components. Select this option when no surround back speakers are connected. None – “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.46) The surround speakers and subwoofer (or front speakers) will produce surround back channel audio. Note ▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”). ▪ When using surround back speakers, be sure to connect the surround back left and right speakers. Using only one surround back speaker was discontinued. ▪ “Surround Back” is not available when “Surround” is set to “None”, or when “Layout (Surround)” is set to “Front”. For details, see the following: – “Setting the use of surround speakers and their size” (p.95) – “Setting the layout of the surround speakers” (p.96) 96 En Setting the use of presence speakers and their size Setting the layout of the presence speakers Selects the setting according to the use and size of your presence speakers. Selects a presence layout when presence speakers are used. This setting facilitates the optimization of the sound field effect. Setup menu Setup menu “Speaker” > “Configuration” > “Front Presence” “Speaker” > “Configuration” > “Front Presence” > “Layout” Settings Settings Select this option for small speakers. Small The subwoofer or front speakers will produce presence channel lowfrequency components (configurable in “Crossover”). Select this option for large speakers. Large None The presence speakers will produce all of the presence channel frequency components. Front Height Select this option when presence speakers are installed on the front wall. Overhead Select this option when presence speakers are installed to the ceiling. Dolby Enabled SP Select this option when using the Dolby Enabled speakers as the presence speakers. Note Select this option when no presence speakers are connected. ▪ This setting is not available when “Front Presence” is set to “None”. For details on “Front Presence” in the “Setup” menu, see the following: The front speakers will produce presence channel audio. – “Setting the use of presence speakers and their size” (p.97) Note ▪ For details on the layouts of the presence speakers, see the following: When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”). – “Presence speaker layout” (p.162) Setting the crossover frequency of the low-frequency components Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to “Small”. A frequency sound lower than the specified value will be produced from the subwoofer or front speakers. Setup menu “Speaker” > “Configuration” > (speaker) > “Crossover” Settings 40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz Note If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and crossover frequency to maximum. 97 En Setting the distance between each speaker and the listening position Setting the use of a subwoofer Selects the setting according to the use of your subwoofer. Setup menu Sets the distance between each speaker and the listening position so that sounds from the speakers reach the listening position at the same time. “Speaker” > “Configuration” > “Subwoofer” Setup menu Settings “Speaker” > “Distance” Select this option when a subwoofer is connected. Use Choices The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Presence L, Presence R, Subwoofer Select this option when no subwoofer is connected. None The front speakers will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. Setting range 0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments Setting the phase of the subwoofer Note Select the unit of distance from “Meter” or “Feet” in “Unit”. Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the subwoofer phase. Setup menu “Speaker” > “Configuration” > “Subwoofer” > “Phase” Settings Normal Does not reverse the subwoofer phase. Reverse Reverses the subwoofer phase. Note This setting is not available when “Subwoofer” is set to “None”. For details on “Subwoofer” in the “Setup” menu, see the following: ▪ “Setting the use of a subwoofer” (p.98) 98 En Adjusting the volume of each speaker Setting the equalizer Adjusts the volume of each speaker to suit your listening position. Selects the type of equalizer to be used and adjusts the tone. Setup menu Setup menu “Speaker” > “Level” “Speaker” > “Parametric EQ” > “Parametric EQ” Choices Settings Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Presence L, Presence R, Subwoofer Manual Select this option when you want to adjust the equalizer manually. YPAO:Flat Adjusts individual speakers to achieve the same characteristics. YPAO:Front Adjusts individual speakers to achieve the same characteristics as the front speakers. YPAO:Natural Adjusts all speakers to achieve a natural sound. Through Does not use the equalizer. Setting range -10.0 dB to +10.0 dB (0.5 dB increments) Note Test tone output helps you to adjust the speaker balance while confirming its effect. For details, see the following: Note ▪ “Outputting test tones” (p.100) “YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the YPAO measurement results have already been saved. Press ENTER again to view the YPAO measurement results. For details on the YPAO, see the following: ▪ “Optimizing the speaker settings automatically (YPAO)” (p.38) When selecting “Manual” 1 2 3 Set “Parametric EQ” to “Manual” and press ENTER. Press ENTER again to enter the edit screen. Use the cursor keys to select a speaker and press ENTER. Note ▪ To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”. ▪ To copy the parametric equalizer values acquired with the YPAO measurement results to the “Manual” fields for fine adjustment, select “PEQ Data Copy” and then an equalizer type. 99 En 4 Use the cursor keys to select a center frequency from the 7 preset bands (4 for subwoofer). Outputting test tones Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Setup menu “Speaker” > “Test Tone” Settings Off Does not output test tones. On Outputs test tones automatically when you adjust the speaker balance or equalizer. Reloading the previous YPAO adjustments 5 When the speaker settings you have configured manually are not suitable, you can discard the manual settings and reload the previous YPAO adjustments. To fine-adjust the center frequency, Q factor (bandwidth) or gain, use the cursor keys to select an item. Setup menu “Speaker” > “YPAO Result” Freq.: Use the cursor keys to adjust the center frequency of the selected band. 1 2 Q: Use the cursor keys to adjust the Q factor (bandwidth) of the selected band. Gain: Use the cursor keys to adjust the gain of the selected band. Press SETUP. This completes the settings. Setting range Note Center frequency: 15.6 Hz to 16.0 kHz (15.6 Hz to 250.0 Hz for subwoofer) You can check the previous YPAO adjustments (“Wiring”, “Size”, “Distance”, and “Level”) in “YPAO Result”. Q factor: 0.500 to 10.080 Gain: -20.0 dB to +6.0 dB 6 Use the cursor keys to select “Setup Reload” and press ENTER. Press SETUP. This completes the settings. 100 En Configuring the sound settings Checking the current audio signal information Enabling Lipsync adjustment Displays information about the current audio signal. Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select” in the “Setup” menu. Setup menu Note “Sound” > “Information” Format For details on “Auto/Manual Select” in the “Setup” menu, see the following: Audio format of the input signal ▪ “Setting the adjustment method of the Lipsync function” (p.102) The number of source channels in the input signal (front/ surround/LFE) Channel Input Output Setup menu For example, “5.1 (3/2/0.1)” means 5.1ch in total (3 front channels, 2 surround channels, and LFE). “Sound” > “Lipsync” > “Delay Enable” (When DTS:X content is played back) Disable Disables the “Lipsync” adjustment. For example, “7.1.4” denotes “standard 7.1-channel plus 4 for overhead speaker channels”. Enable Enables the “Lipsync” adjustment. Settings Note Sampling The number of samples per second of the input digital signal Dialogue The dialogue normalization level of the input bitstream signal Channel The number of signal output channels (for example, “5.1.2” denotes “standard 5.1-channel plus 2 for overhead speaker channels”) and the speaker terminals from which signals are output This setting is applied separately to each input source. Note ▪ Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the specifications and settings of the playback device. ▪ Use the left/right cursor keys to display other informations in the “Setup” menu. 101 En Adjusting the delay of the Lipsync function Setting the adjustment method of the Lipsync function Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set to “Manual”. You can fine-adjust the audio output timing when “Auto/ Manual Select” is set to “Auto”. Selects the method for adjusting the delay between video and audio output. Setup menu Setup menu “Sound” > “Lipsync” > “Auto/Manual Select” “Sound” > “Lipsync” > “Adjustment” Settings Manual Setting range 0 ms to 500 ms (1 ms increments) Select this option when you want to adjust the delay between video and audio output manually. Note Adjust the audio output timing in “Adjustment”. Auto For details on “Auto/Manual Select” in the “Setup” menu, see the following: Adjusts the delay between video and audio output automatically when a TV that supports an automatic lipsync function is connected to the unit via HDMI. ▪ “Setting the adjustment method of the Lipsync function” (p.102) If necessary, you can fine-adjust the audio output timing in “Adjustment”. Note ▪ You can enable/disable the Lipsync function by input sources in “Delay Enable” in the “Setup” menu. For details, see the following: – “Enabling Lipsync adjustment” (p.101) ▪ For details on “Adjustment” in the “Setup” menu, see the following: – “Adjusting the delay of the Lipsync function” (p.102) 102 En MOVIE Selecting sound programs Sports This program allows listeners to enjoy the rich vividness of sport broadcasts and light entertainment programs. In sports broadcasts, the commentators’ voices are positioned clearly at the center, while the atmosphere inside the stadium is realistically conveyed by the peripheral delivery of the sounds of the fans in a suitable space. Action Game This program is suitable for action games, such as car racing and fighting games. The reality of, and emphasis on, various effects makes the player feel like they are right in the middle of the action, allowing for greater concentration. Use this program in combination with Compressed Music Enhancer for a more dynamic and strong sound field. Roleplaying Game This program is suitable for role-playing and adventure games. This program adds depth to the sound field for natural and realistic reproduction of background music, special effects, and dialogue from a wide variety of scenes. Use this program in combination with Compressed Music Enhancer for a clearer and more spatial sound field. Music Video This program allows you to enjoy videos of pop, rock, and jazz concerts, as if you were there yourself. Immerse yourself in the hot concert atmosphere thanks to the vividness of the singers and solos on stage, a presence sound field that emphasizes the beat of rhythm instruments, and a surround sound field that reproduces the space of a big live hall. Standard This program creates a sound field that emphasizes the surround feeling without disturbing the original acoustic positioning of multichannel audio. Its design is based on the concept of the ideal movie theater, in which the audience is surrounded by beautiful reverberations from the left, right, and rear. Spectacle This program delivers the scale and grandeur of spectacular movie productions. It delivers an expansive sound space to match the cinemascope wide-screen, and boasts a broad dynamic range, providing everything from small delicate sounds to powerful loud booms. Sci-Fi This program clearly reproduces the finely elaborated sound design of the latest Sci-Fi and SFX movies. You can enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between dialogue, sound effects, and background music. Adventure This program is ideal for reproducing the sound design of action and adventure movies precisely. The sound field restrains reverberations, but puts emphasis on reproducing a sensation of expansiveness on both sides, powerful space expanded widely to the left and right. The restrained depth creates a clear and powerful space, while also maintaining the articulation of the sounds and the separation of the channels. Drama This program features stable reverberations that match a wide range of movie genres, from serious dramas to musicals and comedies. The reverberations are modest, but suitably stereophonic. The sound effects and background music are reproduced with a gentle echo that does not impinge on the articulation of the dialogue. You’ll never get tired listening for long periods. Selects the sound program to change the settings of the sound program. Note You can select a sound program by pressing PROGRAM. Setup menu “Sound” > “DSP Parameter” MUSIC Hall in Munich This program simulates a Munich concert hall with approximately 2,500 seats that uses stylish wood for the interior finishing. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena. Hall in Vienna This program simulates a 1700-seat, middle-sized concert hall with a shoebox shape that is traditional in Vienna. Pillars and ornate carvings create extremely complex reverberations from all around the audience, producing a very full, rich sound. Chamber This program creates a relatively wide space with a high ceiling, like an audience hall in a palace. It offers pleasant reverberations that are suitable for courtly music and chamber music. Cellar Club This program simulates an intimate concert venue with a low ceiling and homey atmosphere. A realistic, live sound field delivers powerful sounds that make you feel as if you are sitting in the front row in front of a small stage. The Roxy Theatre This program creates the sound field of a 460-seat rock music concert venue in Los Angeles. The listener’s virtual seat is at the center left of the hall. The Bottom Line This program creates the sound field at stage front in The Bottom Line, a famous New York jazz club once. The floor can seat 300 people to the left and right in a sound field offering real and vibrant sound. 2ch Stereo Use this program to mix down multichannel sources to 2 channels. When multichannel signals are input, they are down mixed to 2 channels and output from the front speakers (this program does not utilize CINEMA DSP). 7ch Stereo Use this program to output sound from all speakers. When you play back multichannel sources, the unit mixes down the source to 2 channels, and then outputs the sound from all speakers. This program creates a larger sound field and is ideal for background music at parties. 103 En Mono Movie Adjusting the delay between the direct sound and presence sound field generation This program reproduces monaural video sources, such as classic movies, in an atmosphere of a good old movie theater. The program creates a pleasant space with depth, by adding breadth and the appropriate reverberation to the original audio. Adjusts the delay between the direct sound and presence sound field generation. Higher to enhance the delay effect, and lower to reduce it. Adjusting the sound field effect level Adjusts the sound field effect level. Higher to enhance the sound field effect, and lower to reduce it. Setup menu “Sound” > “DSP Parameter” > (sound program) > “Initial Delay” Setting range Setup menu 1 ms to 99 ms “Sound” > “DSP Parameter” > (sound program) > “DSP Level” Setting range Note -6 dB to +3 dB ▪ Available items vary depending on the selected sound program. ▪ To restore the default settings for the selected sound program, select “Reset”. Note Adjusting the broadening effect of the presence sound field ▪ Available items vary depending on the selected sound program. ▪ To restore the default settings for the selected sound program, select “Reset”. Adjusts the broadening effect of the presence sound field. Setup menu “Sound” > “DSP Parameter” > (sound program) > “Room Size” Setting range 0.1 to 2.0 (higher to enhance the broadening effect) Note ▪ Available items vary depending on the selected sound program. ▪ To restore the default settings for the selected sound program, select “Reset”. 104 En Adjusting the loss of the presence sound field Adjusting the delay between the direct sound and reverberant sound generation Adjusts the loss of the presence sound field. Setup menu Adjusts the delay between the direct sound and reverberant sound generation. Higher to enhance the delay effect, and lower to reduce it. “Sound” > “DSP Parameter” > (sound program) > “Liveness” Setting range Setup menu 0 to 10 (higher to enhance the reflectivity) “Sound” > “DSP Parameter” > (sound program) > “Reverb Delay” Note Setting range ▪ Available items vary depending on the selected sound program. 0 ms to 250 ms ▪ To restore the default settings for the selected sound program, select “Reset”. Note ▪ Available items vary depending on the selected sound program. Adjusting the decay time of the rear reverberant sound ▪ To restore the default settings for the selected sound program, select “Reset”. Adjusts the decay time of the rear reverberant sound. Higher to enrich the reverberant sound and lower to have clear sound. Setup menu Adjusting the volume of the reverberant sound Adjusts the volume of the reverberant sound. Higher to strengthen the reverberant sound, and lower to weaken it. Setup menu “Sound” > “DSP Parameter” > (sound program) > “Reverb Time” Setting range “Sound” > “DSP Parameter” > (sound program) > “Reverb Level” 1.0 s to 5.0 s Setting range 0 % to 100 % Note ▪ Available items vary depending on the selected sound program. Note ▪ To restore the default settings for the selected sound program, select “Reset”. ▪ Available items vary depending on the selected sound program. ▪ To restore the default settings for the selected sound program, select “Reset”. 105 En Adjusting the delay between the direct sound and surround sound field generation Adjusts the loss of the surround sound field. Adjusts the delay between the direct sound and surround sound field generation. Higher to enhance the delay effect, and lower to reduce it. “Sound” > “DSP Parameter” > (sound program) > “Surround Liveness” Adjusting the loss of the surround sound field Setup menu Setup menu Setting range “Sound” > “DSP Parameter” > (sound program) > “Surround Initial Delay” 0 to 10 (higher to enhance the reflectivity) Setting range Note 1 ms to 49 ms ▪ Available items vary depending on the selected sound program. ▪ To restore the default settings for the selected sound program, select “Reset”. Note ▪ Available items vary depending on the selected sound program. Adjusting the delay between the direct sound and surround back sound field generation ▪ To restore the default settings for the selected sound program, select “Reset”. Adjusting the broadening effect of the surround sound field Adjusts the delay between the direct sound and surround back sound field generation. Higher to enhance the delay effect, and lower to reduce it. Adjusts the broadening effect of the surround sound field. Setup menu Setup menu “Sound” > “DSP Parameter” > (sound program) > “Surround Back Initial Delay” “Sound” > “DSP Parameter” > (sound program) > “Surround Room Size” Setting range Setting range 1 ms to 49 ms 0.1 to 2.0 (higher to enhance the broadening effect) Note Note ▪ Available items vary depending on the selected sound program. ▪ To restore the default settings for the selected sound program, select “Reset”. ▪ Available items vary depending on the selected sound program. ▪ To restore the default settings for the selected sound program, select “Reset”. 106 En Settings Adjusting the broadening effect of the surround back sound field Auto Uses the decoder automatically selected by input source. The DTS Neural:X decoder is selected for DTS sources and the Dolby Surround decoder is selected for other sources. bDsur Dolby Surround decoder. Expands the sound using a method optimized for the layout of the installed speakers. It produces the extended surround sound optimized for your speaker system. A real acoustic space (including overhead) will be created especially when objectbased audio (such as Dolby Atmos content) is played. Neural:X DTS Neural:X decoder. Expands the sound using a method optimized for the layout of the installed speakers. It produces the extended surround sound optimized for your speaker system. A real acoustic space (including overhead) will be created especially when objectbased audio (such as DTS:X content) is played. Neo:6 Cinema Uses the DTS Neo:6 decoder (or DTS-ES Matrix decoder) suitable for movies. Sounds will be output from the surround/surround back speakers. Neo:6 Music Uses the DTS Neo:6 decoder (or DTS-ES Matrix decoder) suitable for music. Sounds will be output from the surround/surround back speakers. Adjusts the broadening effect of the surround back sound field. Setup menu “Sound” > “DSP Parameter” > (sound program) > “Surround Back Room Size” Setting range 0.1 to 2.0 (higher to enhance the broadening effect) Note ▪ Available items vary depending on the selected sound program. ▪ To restore the default settings for the selected sound program, select “Reset”. Adjusting the loss of the surround back sound field Adjusts the loss of the surround back sound field. Setup menu “Sound” > “DSP Parameter” > (sound program) > “Surround Back Liveness” Note Setting range ▪ For details on each decoder, see the following: 0 to 10 (higher to enhance the reflectivity) – “Glossary of audio decoding format” (p.164) ▪ You can adjust the surround decoder parameters in “Surround Decoder” in the “Setup” menu. For details, see the following: Note ▪ Available items vary depending on the selected sound program. – “Adjusting the center localization (broadening effect) of the front sound field” (p.108) ▪ To restore the default settings for the selected sound program, select “Reset”. – “Setting the use of Center Spread” (p.108) ▪ The selected surround decoder may not work for some input sources. Selecting the surround decoder used in the program ▪ We recommend Dolby Surround while network streaming is Dolby contents. ▪ The Neural:X decoder does not work for Dolby Digital Plus or Dolby TrueHD signals. Select “Auto” or “bDsur” for these signals. Selects a surround decoder to be used in combination with the selected sound program. ▪ When the Dolby Surround decoder or the Neural:X decoder is selected, virtual surround processing (such as Virtual CINEMA FRONT) does not work. For details, see the following: Setup menu – “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.46) “Sound” > “Surround Decoder” > “Decode Type” – “Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)” (p.46) 107 En Setting the use of Center Spread Adjusting the entire volume for “7ch Stereo” Selects whether to spread the center channel signals to left and right when a 2channel source is played. This setting is effective when “bDsur” is selected. Adjusts the entire volume. This setting is effective when “7ch Stereo” is selected. Setup menu “Sound” > “7ch Stereo” > “Level” “Sound” > “Surround Decoder” > “Center Spread” Setting range Settings -5 to +5 Off Disables Center Spread. On Enables Center Spread. Setup menu Adjusting the front and rear volume balance for “7ch Stereo” Note ▪ If you feel the center sound is too strong, set this function to “On”. Adjusts the front and rear volume balance. Higher to enhance the front side, and lower to enhance the rear side. This setting is effective when “7ch Stereo” is selected. ▪ For details on the surround decoder, see the following: – “Selecting the surround decoder used in the program” (p.107) Setup menu “Sound” > “7ch Stereo” > “Front / Rear Balance” Adjusting the center localization (broadening effect) of the front sound field Setting range -5 to +5 Adjusts the center localization (broadening effect) of the front sound field. Adjust this higher to strengthen the center localization (less broadening effect) or lower to weaken it (more broadening effect). This setting is effective when “Neo:6 Music” is selected. Setup menu Adjusting the left and right volume balance for “7ch Stereo” Adjusts the left and right volume balance. Higher to enhance the right side, and lower to enhance the left side. This setting is effective when “7ch Stereo” is selected. “Sound” > “Surround Decoder” > “Center Image” Setting range Setup menu 0.0 to 1.0 “Sound” > “7ch Stereo” > “Left / Right Balance” Note Setting range For details on the surround decoder, see the following: -5 to +5 ▪ “Selecting the surround decoder used in the program” (p.107) 108 En Adjusting the height volume balance using the presence speakers for “7ch Stereo” Setting the dynamic range adjustment method Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. Adjusts the height volume balance using the presence speakers. Higher to enhance the upside, and lower to enhance the downside. This setting is effective when “7ch Stereo” is selected. “Sound” > “Dynamic Range” Setup menu Settings Setup menu “Sound” > “7ch Stereo” > “Height Balance” Setting range Maximum Produces audio without adjusting the dynamic range. Standard Optimizes the dynamic range for regular home use. 0 to 10 Sets the dynamic range for clear sound even at night or at low volumes. Minimum/Auto Note The presence speakers do not produce sounds when “Height Balance” is set to “0”. Setting the limit value of the volume Setting the use of Monaural Mix for “7ch Stereo” Enables/disables monaural sound output. This setting is effective when “7ch Stereo” is selected. Setup menu On Enables monaural sound output. Setup menu Setting range Settings Disables monaural sound output. Sets the limit value of the volume adjusted by using such as VOLUME keys on the remote control. “Sound” > “Volume” > “Max Volume” “Sound” > “7ch Stereo” > “Monaural Mix” Off When playing back Dolby TrueHD signals, the dynamic range is automatically adjusted based on the input signal information. -60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.5 to 95.5 (5.0 increments), 97.0] Note For details on the scale of the volume display (dB unit or numeric value), see the following: ▪ “Setting the scale of the volume display” (p.130) 109 En Setting the initial volume for when the unit is turned on Setting Virtual Surround Back Speaker (VSBS) Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. Sets the initial volume when the unit is turned on. When VSBS is enabled, the unit creates VSBS when no surround back speakers are connected. Setup menu “Sound” > “Volume” > “Initial Volume” Setup menu Settings “Sound” > “Virtual Speaker” > “VSBS” Off Mute On Settings Sets the level to the volume level of the unit when it last entered standby mode. Sets the unit to mute the audio output. -80.0 dB to +16.5 dB (0.5 dB increments) [0.5 to 97.0 (0.5 increments)] Off Disables Virtual Surround Back Speaker (VSBS). On Enables Virtual Surround Back Speaker (VSBS). Note Sets the level to the specified volume level. ▪ VSBS is effective only when 6.1/7.1-channel content is played back. ▪ VSBS, that is working with CINEMA DSP 3D, is not available when the straight decode mode or the direct playback mode is enabled. Note ▪ This setting works only when the volume level is set lower than “Max Volume”. For details on “Max Volume” in the “Setup” menu, see the following: – “Setting the limit value of the volume” (p.109) ▪ For details on the scale of the volume display (dB unit or numeric value), see the following: – “Setting the scale of the volume display” (p.130) Adjusting the CINEMA DSP 3D effect level automatically Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted. Setup menu “Sound” > “Adaptive DSP Level” Settings Off Does not adjust the effect level automatically. On Adjusts the effect level automatically. 110 En Configuring the scene settings Choices Selecting items to be included as the scene assignments HDMI Control Control Sync (HDMI Control (p.114)) Input Input (p.56) [Input sources: TUNER, (network sources), SERVER, NET RADIO, Bluetooth, USB] Selects items to be included as the scene assignments. You can also view the settings currently assigned to the selected scene. Registered Content Note [Input sources: others] The scene assignments can include radio stations, or the content on a selected USB storage device, Bluetooth device, and network device. --- Setup menu “Scene” > “Scene Setting” 1 2 Station, Music Content Use the cursor keys to select the SCENE name and press ENTER. To include items as the scene assignments, use the cursor keys to select an item and press ENTER to check the box (or uncheck the box to exclude). Check or uncheck HDMI Output HDMI Output (p.57) Mode DSP Program (p.45), Enhancer (p.82) Sound Tone Control (p.79), YPAO Volume (p.80), Adaptive DRC (p.80), Extra Bass (p.83) Surround Dialogue Lift (p.81), Dialogue Level (p.81), Subwoofer Trim (p.82) Video Video Mode (p.113) Volume Master Volume (p.56) Lipsync Lipsync (p.102) Speaker Setup PEQ Select (p.99) Zone Interlock Power (p.54), Input (p.54), Volume (p.121) Note To restore the default settings for the selected scene, select “Reset” and press ENTER. 111 En Renaming the SCENE name Changes the SCENE name displayed on the front display or on the TV. Setup menu “Scene” > “Scene Rename” 1 2 Use the cursor keys to select the SCENE name and press ENTER to enter the name edit screen. Use the cursor keys and ENTER to rename. Note ▪ To clear the entry, select “CLEAR”. ▪ To restore the default name, select “RESET”. 3 4 Use the cursor keys to select “SAVE” and press ENTER. Press SETUP. This completes the settings. 112 En Configuring the video/HDMI settings Checking the current video and HDMI signal information Setting a resolution to output HDMI video signals Selects a resolution to output HDMI video signals when “Video Mode” is set to “Processing”. Displays information about the current video signal and the TVs connected to the HDMI OUT jacks. Note For details on “Video Mode” in the “Setup” menu, see the following: Setup menu ▪ “Setting the use of the video signal processing” (p.113) “Video/HDMI” > “Information” HDMI Signal Presence or absence of HDMI signal input/output HDMI Resolution Resolutions of input signal (analog or HDMI) and output signal (HDMI) Video Resolution Resolutions supported by the TV Setup menu “Video/HDMI” > “Video Mode” > “Resolution” Settings Note Use the left/right cursor keys to display other informations in the “Setup” menu. Setting the use of the video signal processing Selects a resolution automatically in accordance with TV resolution. 480p/576p, 720p, 1080i, 1080p, 4K Output video signals with a selected resolution. (Only the resolutions supported by your TV are selectable.) If you need to select a resolution that is not supported by your TV, set “MON.CHK” in the “ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on your TV normally.) For details, see the following: Setup menu “Video/HDMI” > “Video Mode” > “Video Mode” ▪ “Removing the limitation on HDMI video output (MON.CHK)” (p.136) Settings Processing Does not convert the resolution. Auto Note Enables/disables the video signal processing (resolution and aspect ratio). Direct Through Disables the video signal processing. Enables the video signal processing. Configure the settings in “Resolution” and “Aspect”. Note ▪ When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to reduce video output delay. ▪ When “Video Mode” is set to “Processing” and the resolution is being converted, short messages are not displayed on the TV screen. 113 En Setting an aspect ratio to output HDMI video signals Setting the audio jack used for TV audio input Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to “Processing”. Selects an audio input jack of the unit to be used for TV audio input when “HDMI Control” is set to “On”. The unit’s input source automatically switches to TV audio when the TV input is switched to its built-in tuner. Note For details on “Video Mode” in the “Setup” menu, see the following: Note ▪ “Setting the use of the video signal processing” (p.113) For details on “HDMI Control” in the “Setup” menu, see the following: ▪ “Setting the use of HDMI Control” (p.114) Setup menu Setup menu “Video/HDMI” > “Video Mode” > “Aspect” “Video/HDMI” > “HDMI Control” > “TV Audio Input” Settings Through Does not convert the aspect ratio. 16:9 Normal Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the screen. Settings AV 1–2, AUDIO 1–5 Note When using ARC to input TV audio to the unit, the input jacks selected here will be used for TV Audio Input. Note This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p (4K) signals. Setting the use of ARC Setting the use of HDMI Control Select whether to output TV audio to the speakers connected to the unit when “HDMI Control” is set to “On”. Enables/disables HDMI Control. HDMI Control allows you to operate external devices via HDMI. Note For details on “HDMI Control” in the “Setup” menu, see the following: Setup menu ▪ “Setting the use of HDMI Control” (p.114) “Video/HDMI” > “HDMI Control” > “HDMI Control” Setup menu Settings “Video/HDMI” > “HDMI Control” > “ARC” Off On Disables HDMI Control. Settings Enables HDMI Control. Off Disables ARC. Configure the settings in “TV Audio Input”, “ARC” and “Standby Sync”. On Enables ARC. Note Note To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Controlcompatible devices. For details, see the following: You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use the TV’s speakers. ▪ “HDMI Control and synchronized operations” (p.170) 114 En Linking the standby modes of the unit and the TV Setting the version of HDCP used on the HDMI input jacks Select whether to use HDMI control to link the unit's standby mode to the TV's power when “HDMI Control” is set to “On”. Selects the HDCP version of the HDMI input jacks for watching 4K video content. Note Setup menu For details on “HDMI Control” in the “Setup” menu, see the following: “Video/HDMI” > “HDCP Version” ▪ “Setting the use of HDMI Control” (p.114) Input sources Setup menu HDMI 1–5 “Video/HDMI” > “HDMI Control” > “Standby Sync” Settings Settings Off Does not set the unit to standby mode when the TV is turned off. On Sets the unit to standby mode when the TV is turned off. Auto Sets the unit to standby mode when the TV is turned off only when the unit is receiving TV audio or HDMI signals. Auto Automatically sets the version of HDCP according to content. 1.4 Sets the version of HDCP to always be 1.4. Setting the use of HDMI Standby Through Select whether to output video/audio (input through HDMI jacks) to the TV when the unit is in standby mode. Setting the output of HDMI audio from the TV speaker Note If this function is set to “On” or “Auto”, you can use the input selection keys (HDMI 1–5) to select an HDMI input even when the unit is in standby mode (the standby indicator on the unit blinks). Enables/disables audio output from a TV connected to the HDMI OUT jack. Note Setup menu ▪ The “HDMI OUT1” setting is available only when “HDMI Control” is set to “Off”. “Video/HDMI” > “HDMI Standby Through” ▪ For details on “HDMI Control” in the “Setup” menu, see the following: Settings – “Setting the use of HDMI Control” (p.114) Setup menu Off Does not output video/audio to the TV. “Video/HDMI” > “HDMI Audio Output” > “HDMI OUT1”/“HDMI OUT2” Auto Automatically selects whether to output video/audio depending on the status of the connected device. On Outputs video/audio to the TV. (The unit consumes more power than when “Off” or “Auto” is selected.) Settings Off Disables audio output from the TV. On Enables audio output from the TV. Note ▪ “Off” is not selectable when “HDMI Control” is set to “On”. ▪ For details on “HDMI Control” in the “Setup” menu, see the following: – “Setting the use of HDMI Control” (p.114) 115 En Configuring the network settings Checking the network information on the unit Displays the network information on the unit. Setting the network connection method (Wired/ Wireless) Setup menu Selects the network connection method. “Network” > “Information” Setup menu IP Address IP address “Network” > “Network Connection” Subnet Mask Subnet mask Choices Default Gateway The IP address of the default gateway DNS Server (P) The IP address of the primary DNS server DNS Server (S) The IP address of the secondary DNS server MAC Address (Ethernet) MAC Address (Wi-Fi) Select this option when you want to connect the unit to a network with a commercially-available network cable. Wireless(Wi-Fi) Select this option when you want to connect the unit to a network via the wireless router (access point). MAC address Network Name Network name (the unit’s name on the network) MusicCast Network The status of the MusicCast network connection. Wired/Wireless The status of the wired or wireless connection SSID Wired Note For details on the network connection, see the following: ▪ “Preparing for connecting to a network” (p.33) Setting the network parameters automatically (DHCP) (When using wireless [Wi-Fi] network connection) The SSID of the wireless network Note Set the network parameters (such as IP address, Subnet Mask, and Default Gateway) automatically using a DHCP server. Use the left/right cursor keys to display other informations in the “Setup” menu. Setup menu “Network” > “IP Address” > “DHCP” Settings 116 Off Does not use a DHCP server. Configure the network parameters manually. On Uses a DHCP server to automatically obtain the unit’s network parameters (such as IP address). En Setting the network parameters manually Setting the use of the Network Standby function Set the network parameters (such as IP address, Subnet Mask, and Default Gateway) manually. Selects whether the unit can be turned on from other network devices (network standby). Setup menu Setup menu “Network” > “IP Address” “Network” > “Network Standby” 1 2 3 5 6 7 Off Use the cursor keys to select “IP Address” and press ENTER. On Use the cursor keys to select a parameter type and press ENTER. IP Address 4 Settings Set “DHCP” to “Off”. Specifies an IP address. Disables the network standby function. Enables the network standby function. (The unit consumes more power than when “Off” is selected.) Enables the network standby function. Auto (If “Network Connection” is set to “Wired”, the unit is set to the power saving mode when the network cable is disconnected.) Subnet Mask Specifies a subnet mask. Note Default Gateway Specifies the IP address of the default gateway. If you set “Network Standby” to “Off”, “Bluetooth Standby” will be disabled. DNS Server (P) Specifies the IP address of the primary DNS server. DNS Server (S) Specifies the IP address of the secondary DNS server. With an advanced energy saving design, this product achieves a low power consumption of not more than two watts when in Network Standby mode. Use the cursor keys to move the edit position and to select a value. To confirm the setting, press ENTER. To set another parameter, repeat steps 3 to 5. Press SETUP. This completes the settings. 117 En Setting the MAC address filter Setting the use of a Digital Media Controller Sets the MAC address filter to limit access to the unit from other network devices. Selects whether to allow a Digital Media Controller (DMC) to control playback. A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on the same network. Note ▪ Operation of the AirPlay function or the DMC is not limited by this setting. ▪ You can specify up to 10 network devices that are permitted to access the unit. For details, see the following: Setup menu “Network” > “DMC Control” – “Setting the MAC address” (p.118) Setup menu Settings “Network” > “MAC Address Filter” > “Filter” Disable Does not allow DMCs to control playback. Settings Enable Allows DMCs to control playback. Off Disables the MAC address filter. On Enables the MAC address filter. Specify the MAC addresses of the network devices that will be permitted access to the unit. Setting the use of volume control via AirPlay Enables/disables volume control from iTunes/iPhone via AirPlay. When other than “Off” is set, you can adjust the unit’s volume from the iTunes/iPhone during playback. Setting the MAC address Setup menu “Network” > “AirPlay Volume Interlock” Sets the MAC address of the network device that is permitted to access the unit. You can specify up to 10 network devices. Settings Setup menu “Network” > “MAC Address Filter” > “MAC Address” 1 2 3 4 5 Use the cursor keys to select an MAC address number and press ENTER. Off Disables volume control from iTunes/iPhone. Limited Enables volume control from iTunes/iPhone within the limited range (-80 dB to -20 dB and mute). Full Enables volume control from iTunes/iPhone in the full range (-80 dB to +16.5 dB and mute). Use the cursor keys to move the edit position and to select a value. To confirm the setting, press ENTER. To specify another MAC address, repeat steps 1 to 3. Press SETUP. This completes the settings. 118 En Setting the network name of the unit Edits the network name (the unit’s name on the network) displayed on other network devices. Setup menu “Network” > “Network Name” 1 2 Press ENTER to enter the name edit screen. Use the cursor keys and ENTER to edit the name. Note ▪ To clear the entry, select “CLEAR”. ▪ To restore the default name, select “RESET”. 3 4 Use the cursor keys to select “SAVE” and press ENTER. Press SETUP. This completes the settings. Setting the power interlock from the unit to MusicCast compatible devices Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the power of other devices of the network. Setup menu “Network” > “MusicCast Link Power Interlock” Settings Off Disables the power interlock from the unit (MusicCast master). On Enables the power interlock from the unit (MusicCast master). 119 En Configuring the Bluetooth® settings Setting the use of Bluetooth® Setting the use of the Bluetooth® Standby function Enables/disables the Bluetooth function. Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). If this function is set to “On”, the unit automatically turns on when a connect operation is performed on the Bluetooth device. Setup menu “Bluetooth” > “Bluetooth” Setup menu Settings “Bluetooth” > “Audio Receive” > “Bluetooth Standby” Off Disables the Bluetooth function. On Enables the Bluetooth function. Settings Terminating the connection between a Bluetooth® device and the unit Off Disables the Bluetooth standby function. On Enables the Bluetooth standby function. (The unit consumes more power than when “Off” is selected.) Note This setting is not available when “Network Standby” is set to “Off”. For details, see the following: Terminates the Bluetooth connection between a Bluetooth device (such as a smartphone) and the unit. ▪ “Setting the use of the Network Standby function” (p.117) Setup menu “Bluetooth” > “Audio Receive” > “Disconnect” Select “Disconnect” and press ENTER to terminate the Bluetooth connection. Note This setting is not available when no Bluetooth devices are connected. 120 En Configuring the multi zone settings Checking the Zone2 information Setting the Zone2 limit value of the volume Displays information about Zone2. Sets the Zone2 limit value of the volumes. Setup menu Setup menu “Multi Zone” > “Information” “Multi Zone” > “Zone2” > “Max Volume” On/Off The power on/off for Zone2 Setting range Input The input source selected for Zone2 -60.0 dB to +10.0 dB (5.0 dB increments) [20.5 to 90.5 (5.0 increments)] Volume The volume setting for Zone2 Note Tone Control The tone control setting (the level of Treble and Bass) for Zone2 ▪ This setting is not available when “Volume” is set to “Fixed”. For details, see the following: – “Setting the use of volume adjustments for Zone2 output” (p.121) Note ▪ For details on the scale of the volume display (dB unit or numeric value), see the following: Use the left/right cursor keys to display other informations in the “Setup” menu. – “Setting the scale of the volume display” (p.130) Setting the use of volume adjustments for Zone2 output Enables/disables volume adjustments for Zone2 output. If you have connected an external amplifier with volume control to the unit, disable volume adjustments for Zone2. Setup menu “Multi Zone” > “Zone2” > “Volume” Settings Fixed Disables volume adjustments for Zone2 output. Variable Enables volume adjustments for Zone2 output. Note “Volume” is automatically set to “Variable” when “Power Amp Assign” is set to “7.1 +1Zone” or “5.1.2 +1Zone”. For details on “Power Amp Assign” in the “Setup” menu, see the following: ▪ “Setting your speaker system” (p.94) 121 En Setting the Zone2 initial volume for when the unit is turned on Adjusting the time deviation in relation to the main zone Sets the Zone2 initial volume for when the unit is turned on. Adjusts the time deviation in relation to the main zone. Setup menu Setup menu “Multi Zone” > “Zone2” > “Initial Volume” “Multi Zone” > “Zone2” > “Audio Delay” Settings Setting range Mute On 0 ms to 100 ms (1 ms increments) Sets the level at the volume level of the unit when it last entered standby mode. Off -80.0 dB to +10.0 dB (0.5 dB increments) [0.5 to 90.5 (0.5 increments)] Switching between stereo and monaural for Zone2 output Sets the unit to mute the audio output. Sets the level to the specified volume level. Switches between stereo and monaural for Zone2 output. Setup menu Note “Multi Zone” > “Zone2” > “Monaural” ▪ This setting is not available when “Volume” is set to “Fixed”. For details, see the following: Settings – “Setting the use of volume adjustments for Zone2 output” (p.121) ▪ This setting works only when the volume level is set lower than “Max Volume” in “Zone2”. For details, see the following: – “Setting the Zone2 limit value of the volume” (p.121) Off Produces stereo sounds in Zone2. On Produces monaural sounds in Zone2. ▪ For details on the scale of the volume display (dB unit or numeric value), see the following: – “Setting the scale of the volume display” (p.130) 122 En Setting the use of Compressed Music Enhancer for Zone2 output Setting the use of Extra Bass for Zone2 output Enables/disables Extra Bass for Zone2 output. When Extra Bass is enabled, you can enjoy enhanced bass sounds, regardless of the size of speakers. Enables/disables Compressed Music Enhancer for Zone2 output. Setup menu Setup menu “Multi Zone” > “Zone2” > “Extra Bass” “Multi Zone” > “Zone2” > “Enhancer” Settings Settings Off Disables Compressed Music Enhancer. On Enables Compressed Music Enhancer. Off Disables Extra Bass. On Enables Extra Bass. Adjusting the volume balance for Zone2 output Adjusting the tone for Zone2 output Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for Zone2 output. Setup menu Adjusts the volume balance for Zone2 output. Higher to enhance the right side, and lower to enhance the left side. Setup menu “Multi Zone” > “Zone2” > “Left / Right Balance” “Multi Zone” > “Zone2” > “Tone Control” Setting range Choices -20 to +20 Treble, Bass Settings Auto Adjusts the levels of the high-frequency range (Treble) and low-frequency range (Bass) automatically in synchronization with the main volume, with correction for the auditory response of the human ear. Manual Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) manually (-6.0 to +6.0 dB, 0.5 dB increments). Bypass Does not adjust the level of high-frequency range (Treble) and lowfrequency range (Bass). 123 En Changes the zone name displayed on the TV screen. Setting the use of switching to the party mode on Zone2 Setup menu Enables/disables switching to the party mode. Renaming the zone name “Multi Zone” > “Zone Rename” 1 Setup menu “Multi Zone” > “Party Mode Set” > “Target : Zone2” Use the cursor keys to select a zone name to be renamed and press ENTER. Settings The cursor moves to the name edit screen. 2 Use the cursor keys and ENTER to rename. Disable Disables switching to the party mode. Enable Enables switching to the party mode. You can turn on/off the party mode by pressing PARTY on the remote control. Note For details on party mode, see the following: ▪ “Enjoying the same source in multiple rooms (party mode)” (p.55) Note ▪ To clear the entry, select “CLEAR”. ▪ To restore the default name, select “RESET”. 3 4 Use the cursor keys to select “SAVE” and press ENTER. Press SETUP. This completes the settings. 124 En Configuring the system settings Checking the system information on the unit Setting the on-screen menu language Displays the system information on the unit. Select the on-screen menu language. Setup menu Setup menu “System” > “Information” “System” > “Language” Remote ID The unit’s remote control ID setting Settings TV Format The unit’s video signal type English English Speaker Impedance The speaker impedance setting of the unit 日本語 Japanese (Asia and General models only) Français French The FM/AM tuning frequency setting of the unit Deutsch German System ID System ID number Español Spanish Firmware Version The version of firmware installed on the unit Русский Russian Note Italiano Italian Use the left/right cursor keys to display other informations in the “Setup” menu. 中文 Chinese Tuner Frequency Step Note The information on the front display is provided in English only. 125 En Necessary setting Combining audio of another input source with video of the current input source For example, if you have connected a video device to AV 1 (COMPONENT VIDEO) and AV 2 (AUDIO) jack of the unit, change the combination setting as follows. Select the audio of a different input source to play back together with the video of the currently selected input source. For example, use this function in the following cases. Video output (component video) • Connecting a playback device that supports HDMI video output, but not HDMI audio output COMPONENT VIDEO The unit (rear) TRIGGER OUT 12V 0.1A Setup menu HDMI OUT ( HDCP2.2 ) IN 2 “System” > “Audio In” 1 OUT 1 ARC 2 PR AV 1 (COMPONENT VIDEO) jacks PR (1 MOVIE) ANTENNA AUDIO 1 Input sources PR ( 2 RADIO ) ( 7 TV ) FM OPTICAL PB AUDIO 2 HDMI 1-5, AV 1-2 PB OPTICAL PR AUDIO 3 Settings COAXIAL Y VIDEO AUDIO ZONE OUT AUDIO 5 ZONE 2 L L L R Video/audio input jacks available on the unit Output jacks on video device Video Audio Digital coaxial AV 2 (AUDIO) jacks Input jacks on the unit Video Digital optical Analog stereo Digital optical Composite video Digital coaxial Audio AUDIO 1 (OPTICAL) AUDIO 2 (OPTICAL) HDMI 1-5 AV 1 (COAXIAL) AUDIO 3 (COAXIAL) AV 2 (AUDIO) Analog stereo Component video R Set-top box R Digital optical HDMI Y Y AV 2 PR PB AUDIO 4 GND AV 1-2, AUDIO 1-5 AV 1 COMPONENT VIDEO COAXIAL PHONO Y AM ( 3 MUSIC ) Y PB PB REMOTE AUDIO 4-5 AUDIO 1 (OPTICAL) AV1 (COMPONENT VIDEO) AUDIO 2 (OPTICAL) AV 2 (AUDIO) AUDIO 4-5 (AUDIO) AUDIO 1 (OPTICAL) AV2 (COMPOSITE VIDEO) AUDIO 2 (OPTICAL) AV 1 (COAXIAL) AUDIO 3 (COAXIAL) 126 En Audio output (analog stereo) 1 2 Press INPUT to select “AV 1” (video input jack to be used) as the input source. Setting input sources to be skipped when operating the INPUT key Press SETUP. Set which input sources are skipped when operating the INPUT key. MAIN You can select the desired input source quickly by using this function. ZONE 2 SLEEP PARTY PURE DIRECT HDMI OUT Setup menu SCENE 1 2 3 4 5 6 7 8 “System” > “Input Skip” INPUT TUNER NET RED GREEN USB SETUP BLUETOOTH PRESET TOP MENU YELLOW HOME Input sources BLUE POP-UP /MENU Cursor keys HDMI 1-5, AV 1-2, AUX, AUDIO 1-5, PHONO, TUNER, NET, Bluetooth, USB ENTER Settings ENHANCER PROGRAM SUR. DECODE VOLUME BASS STRAIGHT MEMORY TUNING BAND TUNING TOP MENU HOME POP-UP / /MEN /MENU Off Does not skip the selected input source. On Skips the selected input source. Note 3 4 5 6 When using AV CONTROLLER, you cannot select the input sources set to “On” in this function. Use the cursor keys to select “System” and press ENTER. Use the cursor keys to select “Audio In” and press ENTER. Use the cursor keys to select “AV 1” and then select “AV 2” (audio input jack to be used). Press SETUP. This completes the necessary settings. 127 En Automatically changing the input source names displayed on the front display Manually changing the input source names displayed on the front display Automatically changes the input source names displayed on the front display. You can select a name created by the Auto Rename function. Allows the input source names displayed on the front display to be set manually. Setup menu “System” > “Input Rename” “System” > “Input Rename” Input sources Input sources HDMI 1-5, AV 1-2, AUX, AUDIO 1-5, PHONO, TUNER, MusicCast Link, SERVER, NET RADIO, Bluetooth, USB HDMI 1-5, AV 1, AUDIO 1-3 1 2 3 4 Setup menu 1 Use the cursor keys to select an input source to be renamed. Use the cursor keys to select an input source to be renamed. Note Use the cursor keys to select “Auto”. If the input source is set to “Auto”, use the cursor keys to select “Manual”. 2 To change another input source name, repeat steps 1 to 2. Press ENTER. The cursor moves to the name edit screen. Press SETUP. 3 This completes the settings. Note Use the cursor keys and ENTER to edit the name. Note When “Auto” is selected, the created name is saved even after the external device is disconnected. To reset to the default setting, switch the setting to “Manual” and then back to “Auto”. ▪ To cancel the entry, select “CLEAR”. ▪ To restore the default name, select “RESET”. 4 5 6 Use the cursor keys to select “SAVE” and press ENTER. To change another input source name, repeat steps 1 to 4. Press SETUP. This completes the settings. 128 En Setting the use of Auto Play function Enables/disables Auto Play function in Internet streaming services and following input sources. Setup menu Setting the function for the PROGRAM key on the remote control Sets the function that is assigned to the PROGRAM key on the remote control. You can use the PROGRAM key for other than DSP program selection. “System” > “Auto Play” Setup menu Input sources “System” > “Remote Key” > “PROGRAM Key” (network sources), SERVER, NET RADIO, Bluetooth, USB Settings Settings Assign1 Off Disables Auto Play function. On Starts automatically to play back the last content which you played back. Auto Starts automatically to play back the content which only you played back at setting the unit to standby mode. Enables selecting the DSP Programs. Enables selecting just the DSP Movie/Music Programs. Assign2 Note In some input sources or content, you might not enable Auto Play function. Setting sound programs to skip when operating the PROGRAM key The up key of the PROGRAM keys: toggle between the Movie Programs The down key of the PROGRAM keys: toggle between the Music Programs Assign3 Enables selecting the NETWORK sources. Assign4 Enables moving to the previous/next page of the Browse Screen. Assign5 Enables fine-adjusting the subwoofer volume. Assign6 Enables adjusting the volume of dialogue sounds. Enables selecting shuffle/repeat settings. Assign7 The up key of the PROGRAM keys: repeat The down key of the PROGRAM keys: shuffle Set which sound programs are skipped when operating the PROGRAM key. Displays the front/on-screen display information. You can select the desired sound program quickly by using this function. Assign8 Setup menu The up key of the PROGRAM keys: front display information The down key of the PROGRAM keys: on-screen display information “System” > “DSP Skip” Note Settings This setting does not change the function of the PROGRAM key on the front panel. Off Does not skip the selected sound program. On Skips the selected sound program. 129 En Setting the unit's functions for the RED/GREEN/ YELLOW/BLUE keys of the remote control Setting the scale of the volume display Switches the scale of the volume display. Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control. Setup menu Setup menu “System” > “Display Set” > “Volume” “System” > “Remote Key” > “Color Key” Settings Settings dB Displays the volume in the “dB” unit. 0-97 Displays the volume in the numeric value (0-97). Default Assigns the functions of devices connected to the unit with an HDMI cable. Setting the use of short messages on the TV This setting is effective when “HDMI Control” is set to “On”. Assigns the functions of TV Control to each key. Selects whether to display short messages on the TV screen when the unit is operated (such as input selection and volume adjustment). RED: EXIT (closes the menu on the TV) TV Control GREEN: INFO (displays information about the TV such as the resolution) YELLOW: BROADCAST (switches the TV broadcast type) Setup menu BLUE: INPUT (switches the TV input) “System” > “Display Set” > “Short Message” This setting is effective when “HDMI Control” is set to “On”. Settings Note Off Does not display short messages on the TV screen. ▪ For details on “HDMI Control” in the “Setup” menu, see the following: On Displays short messages on the TV screen. – “Setting the use of HDMI Control” (p.114) Setting the image to be used as wallpaper on the TV ▪ To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Controlcompatible devices. For details, see the following: – “HDMI Control and synchronized operations” (p.170) Selects the image to be used as wallpaper on the TV. ▪ HDMI Control might not work properly. Setup menu Adjusting the brightness of the front display “System” > “Display Set” > “Wallpaper” Settings Adjusts the brightness of the front display. Setup menu “System” > “Display Set” > “Dimmer (Front Display)” Piano Displays the piano image on the TV screen when there is no video signal. Gray Displays a gray background on the TV screen when there is no video signal. Setting range -4 to 0 (higher to brighten) Note The front display may become dark when “ECO Mode” is set to “On”. For details, see the following: ▪ “Setting the use of the eco mode” (p.132) 130 En Specifying the condition for the TRIGGER OUT jack to function Switching the output level for electronic signal transmission manually Specifies the condition for the TRIGGER OUT jack to function. Switches the output level for electronic signal transmission manually when “Trigger Mode” is set to “Manual”. This setting can also be used to confirm proper function of the external device connected via the TRIGGER OUT jack. Setup menu “System” > “Trigger Output” > “Trigger Mode” Setup menu Settings Power Source Manual “System” > “Trigger Output” > “Trigger Mode” > “Manual” The TRIGGER OUT jack functions in sync with the power status of the zone specified with “Target Zone.” Settings The TRIGGER OUT jack functions in sync with the input switching in the zone specified with “Target Zone.” Low Stops the electronic signal transmission. High Transmits the electronic signal. An electronic signal is transmitted according to the setting made in “Source.” Specifying the zone with which the TRIGGER OUT jack functions are synchronized Select this to manually switch the output level for electronic signal transmission with “Manual.” Note Specifies the zone with which the TRIGGER OUT jack functions are synchronized. For details on “Target Zone” in the “Setup” menu, see the following: Setup menu ▪ “Specifying the zone with which the TRIGGER OUT jack functions are synchronized” (p.131) “System” > “Trigger Output” > “Target Zone” Specifying the output level of the electronic signal transmitted with each input Settings Specifies the output level of the electronic signal transmitted with each input, switching when “Trigger Mode” is set to “Source”. Main Setup menu Zone2 “System” > “Trigger Output” > “Trigger Mode” > “Source” When “Trigger Mode” is set to “Power,” electronic signal transmission is synchronized with the power status of the main zone. When “Trigger Mode” is set to “Source,” electronic signal transmission is synchronized with the input switching in the main zone. When “Trigger Mode” is set to “Power,” electronic signal transmission is synchronized with the power status of Zone2. Choices When “Trigger Mode” is set to “Source,” electronic signal transmission is synchronized with the input switching in Zone2. HDMI 1-5, AV 1-2, AUX, AUDIO 1-5, TUNER, PHONO, (network sources), Bluetooth, USB, AirPlay, MusicCast Link, SERVER, NET RADIO When “Trigger Mode” is set to “Power,” electronic signal transmission is synchronized with the power status of the main zone or Zone2. All Settings When “Trigger Mode” is set to “Source,” electronic signal transmission is synchronized with the input switching in the main zone or Zone2. Low Stops the electronic signal transmission when you switch to the input source specified in this option. Note High Transmits the electronic signal when you switch to the input source specified in this option. ▪ “Specifying the condition for the TRIGGER OUT jack to function” (p.131) For details on “Trigger Mode” in the “Setup” menu, see the following: 131 En Setting the amount of time for the auto-standby function Setting the use of the eco mode You can reduce the unit’s power consumption by setting the eco mode to “On”. After changing the setting, be sure to press ENTER to restart the unit. Set the amount of time for the auto-standby function. When the eco mode is enabled, you can reduce the unit’s power consumption. Setup menu Setup menu “System” > “ECO” > “Auto Power Standby” “System” > “ECO” > “ECO Mode” Settings Settings Off Does not set the unit to standby mode automatically. 5 minutes, 20 minutes Sets the unit to standby mode when you have not operated the unit and the unit has not detected any input signal for the specified time. 2 hours, 4 hours, 8 hours, 12 hours Sets the unit to standby mode when you have not operated the unit for the specified time. Note Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front display. Off Disables the eco mode. On Enables the eco mode. Note ▪ When “ECO Mode” is set to “On”, the front display may become dark. ▪ If you want to play audio at high volume, set “ECO Mode” to “Off”. Preventing accidental changes to the settings Prevents accidental changes to the settings. Setup menu “System” > “Memory Guard” Settings Off Does not protect the settings. On Protects the settings until “Off” is selected. Note When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen. 132 En Updating the firmware via the network Updates the firmware via the network. You can also check the firmware version and system ID. Setup menu “System” > “Firmware Update” Choices Firmware Update Starts the process to update the unit’s firmware. USB Update Displays how to update the firmware using a USB memory device in the “ADVANCED SETUP” menu. Note ▪ “Firmware Update” is not selectable when firmware update is in preparation. ▪ Firmware update takes about 20 minutes or more. ▪ If the Internet connection speed is slow, or the unit is connected to the wireless network, network update may not be possible depending on the condition of the network. In this case, wait until firmware update is ready, or update the firmware using the USB memory device. For details on using the USB memory device, see the following: – “Updating the firmware (UPDATE)” (p.138) 133 En Configuring the advanced settings (ADVANCED SETUP menu) Basic operation of the ADVANCED SETUP menu ADVANCED SETUP menu items Perform the following basic procedure to operate the “ADVANCED SETUP” menu while viewing the front display. Use the following table to configure system settings of the unit. 1 2 Set the unit to standby mode. While holding down STRAIGHT on the front panel, press z (power). STRAIGHT The top item and its setting of the “ADVANCED SETUP” menu appear on the front display. 3 4 5 Function SP IMP. Changes the speaker impedance setting. p.135 REMOTE ID Selects the unit’s remote control ID. p.135 TU z (MAIN ZONE) PROGRAM Item Changes the FM/AM tuning frequency setting. p.135 TV FORMAT Switches the video signal type of HDMI output. p.135 MON.CHK Removes the limitation on HDMI video output. p.136 4K MODE Selects the HDMI 4K signal format. p.136 DTS MODE Selects the information to be sent to the BD player connected to the unit about the DTS formats that the unit supports. p.137 BKUP/RSTR Backups and restores all the settings for the unit. p.137 INIT Restores the default settings. p.138 UPDATE Updates the firmware. p.138 VERSION Checks the version of firmware currently installed on the unit. p.138 Press PROGRAM to select an item. Press STRAIGHT to select a setting. Press z (power) to set the unit to standby mode and turn it on again. This completes the settings. Note For details on the default settings, see the following: ▪ “Default settings of the ADVANCED SETUP menu” (p.180) 134 (Asia and General models only) Page En Changing the speaker impedance setting (SP IMP.) LINK MASTER OUT 2 ECO Changing the FM/AM tuning frequency setting (TU) (Asia and General models only) STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC SP IMP.••8¬MIN VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR LINK MASTER OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC TU••••FM50/AM9 Change the unit’s speaker impedance settings depending on the impedance of the speakers connected. VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR ADVANCED SETUP menu Change the FM/AM tuning frequency setting of the unit depending on your country or region. “SP IMP.” ADVANCED SETUP menu “TU” Settings Settings 6 Ω MIN Select this option when you connect 6-ohm speakers to the unit. 8 Ω MIN Select this option when you connect 8-ohm or higher speakers to the unit. Selecting the remote control ID (REMOTE ID) LINK MASTER OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC REMOTE ID••ID1 FM100/AM10 Select this when you want to adjust the FM frequency by 100-kHz steps and AM by 10-kHz steps. FM50/AM9 Select this when you want to adjust the FM frequency by 50-kHz steps and AM by 9-kHz steps. Switching the video signal type (TV FORMAT) VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR Change the unit’s remote control ID so that it matches the remote control’s ID (default: ID1). When using multiple Yamaha AV receivers, you can set each remote control with a unique remote control ID for its corresponding receiver. LINK MASTER OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC TV FORMAT•NTSC VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR ADVANCED SETUP menu Switch the video signal type of HDMI output so that it matches to the format of your TV. “REMOTE ID” Since the unit automatically selects the video signal type so that it matches to the TV, it is unnecessary to change the setting normally. Change the setting only when images on the TV screen do not appear correctly. Settings ID1, ID2 ADVANCED SETUP menu Changing the remote control ID of the remote control “TV FORMAT” • To select ID1, while holding down the left cursor key, hold down SCENE (1) for 5 seconds. Settings NTSC, PAL • To select ID2, while holding down the left cursor key, hold down SCENE (2) for 5 seconds. 135 En Removing the limitation on HDMI video output (MON.CHK) Selecting the HDMI 4K signal format (4K MODE) LINK MASTER OUT 2 ECO LINK MASTER OUT 2 ECO 4K MODE•MODE 1 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC MON.CHK••••YES VOL. MUTE VIRTUAL The unit automatically detects resolutions supported by a TV connected to the HDMI OUT jack. ADVANCED SETUP menu “MON.CHK” Settings SKIP Disables the monitor check function. (Outputs video signals with a specified resolution regardless of compatibility with the TV.) FPL FPR SW SR SL SBL SB SBR ADVANCED SETUP menu Disable the monitor check function if you want to specify a resolution in “Resolution” when the unit cannot detect the TV’s resolution or when you want to specify a different resolution than the detected resolution. Enables the monitor check function. (Outputs video signals with a resolution supported by the TV only.) VOL. MUTE VIRTUAL Selects the format of signals input/output at the unit when HDMI 4K compatible TV and playback device are connected to the unit. FPL FPR SW SR SL SBL SB SBR YES STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC “4K MODE” Settings MODE 1 Inputs/outputs 4K signals shown in the following table. Depending on the connected device or HDMI cables, video may not be displayed correctly. In this case, select “MODE 2”. MODE 2 Inputs/outputs 4K signals shown in the following table. Note When “MODE 1” is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with Ethernet. Format Note MODE 1 ▪ For details on “Resolution” in the “Setup” menu, see the following: 8 bit – “Setting a resolution to output HDMI video signals” (p.113) ▪ Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV after “MON.CHK” has been set to “SKIP”. 4K/60, 50 Hz 4K/30, 25, 24 Hz 136 En RGB 4:4:4 4 YCbCr 4:4:4 4 MODE 2 10 bit 12 bit 8 bit 10 bit – – – – 12 bit YCbCr 4:2:2 4 YCbCr 4:2:0 4 4 – RGB 4:4:4 4 4 – YCbCr 4:4:4 4 4 – YCbCr 4:2:2 4 – 4 Setting DTS Format Notification (DTS MODE) OUT ECO 4 STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER 2 DTS MODE•MODE1 When “Complete” appears on the front display, press z (power) to set the unit to standby mode and turn it on again. If “Failed” appears on the front display, check the following and start the process again. VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR This setting informs the BD player about the DTS formats that the unit supports. ADVANCED SETUP menu In case of “BKUP”: “DTS MODE” • You cannot overwrite save. When you save the settings repeatedly, please move the file in different folder. Settings MODE 1 MODE 2 • The file is stored by the name of “MC_backup_(model name).dat” in the route of the USB memory device. This mode conforms to the DTS:X standard. Use this setting under normal circumstances. Use this setting if the BD player fails to properly output a DTS signal even when it is playing back DTS-HD or DTS:X content. Backuping and restoring all the settings (BKUP/RSTR) OUT 2 ECO BKUP/RSTR•BKUP • Check that the file is stored in the route of the USB memory device. Note ▪ “RSTR” is effective after backuping all the settings. VOL. MUTE VIRTUAL ▪ Do not turn off the unit during the backuping and restoring process. Otherwise, the settings may not be restored correctly. FPL FPR SW SR SL SBL SB SBR ▪ The user information (such as account, password) is not saved. STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC LINK MASTER In case of “RSTR”: Backups and restores all the unit's setting to a USB memory device. Prepare a USB memory device using FAT16 or FAT32 format in advance. ADVANCED SETUP menu “BKUP/RSTR” Settings BKUP Backups all the settings. RSTR Restores all the previous backuped settings. 1 2 3 Connect the USB memory device to the USB jack on the front panel. To start the process, press STRAIGHT to select “BKUP” or “RSTR” and then press INFO on the front panel. Press INFO again after the confirmation message appears on the front display. 137 En Restoring the default settings (INIT) LINK MASTER OUT 2 ECO Checking the firmware version (VERSION) STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC INIT••••CANCEL LINK MASTER OUT 2 ECO VOL. MUTE VIRTUAL STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC VERSION••xx.xx FPL FPR SW SR SL SBL SB SBR VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR Restores the default settings for the unit. Check the version of firmware currently installed on the unit. ADVANCED SETUP menu ADVANCED SETUP menu “INIT” “VERSION” Choices VIDEO Restores the default settings for video configurations. ALL Restores the default settings for the unit. CANCEL Does not perform an initialization. Updating the firmware (UPDATE) LINK MASTER OUT 2 ECO STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi -Res ENHANCER YPAO VOL. A- DRC UPDATE•••••USB VOL. MUTE VIRTUAL FPL FPR SW SR SL SBL SB SBR New firmware that provides additional features or product improvements will be released as needed. Updates can be downloaded from our website to a USB memory device. You can update the firmware using this USB memory device. For details, refer to the information supplied with updates. ADVANCED SETUP menu “UPDATE” Choices USB Update the firmware using a USB memory device. NETWORK Update the firmware via the network. Note Do not perform this menu unless firmware update is necessary. Also, make sure you read the information supplied with updates before updating the firmware. 138 En TROUBLESHOOTING When any problem appears n The power does not turn on in synchronization with the If trouble occurs, first check the following: TV Make sure of the following when the unit does not function properly. • The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely. • The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on. l HDMI Control on the unit is disabled. If turning off the unit is not synchronized to the TV either, check the setting of HDMI Control on the unit. For details on HDMI Control, see the following: – “Setting the use of HDMI Control” (p.114) l HDMI Control on the TV is disabled. If only turning on the unit is not synchronized to the TV, check the setting on the TV. For details, refer to the instruction manual for the TV and set HDMI Control on the TV. • The connectors of each cable are securely inserted in to jacks on each device. If there is no problem with the power and cables, refer to the instructions shown in “When any problem appears” corresponding to the trouble of the unit. If the problem you are experiencing is not listed or if the instructions do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. l Because of a power failure, the unit's power is no longer synchronized. Disconnect the HDMI cables and power cables, and after five minutes, reconnect the cables of playback devices first, then the unit, and then the TV. Then, check that the power is synchronized. Power, system, or remote control trouble n The power does not turn off n The power does not turn on l The protection circuitry has been activated three times consecutively. If the standby indicator on the unit blinks when you try to turn on the power, as a safety precaution, capability to turn on the power is disabled. Contact your nearest Yamaha dealer or service center to request repair. 139 l The internal microcomputer has frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 15 seconds to reboot the unit. If the problem persists, disconnect the power cable from the AC wall outlet and plug it again. En n The power turns off (standby mode) immediately n The unit is not reacting l The unit was turned on while a speaker cable was shorted. Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers. For details, see the following: – “Connecting the speaker” (p.18) l The internal microcomputer is frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 15 seconds to reboot the unit. If the problem persists, disconnect the power cable from the AC wall outlet and plug it again. n The unit enters standby mode automatically n The unit cannot be controlled using the remote control l The sleep timer worked. Turn on the unit and start playback again. l The unit is out of the operating range. Use the remote control within the operating range. For details, see the following: – “Operating range of the remote control” (p.8) l The auto-standby function activated because the unit was not used for the specified time. To disable the auto-standby function, set “Auto Power Standby” in the “Setup” menu to “Off”. For details, see the following: – “Setting the amount of time for the auto-standby function” (p.132) l The batteries are weak. Replace with new batteries. l The speaker impedance setting is incorrect. Set the speaker impedance to match your speakers. For details, see the following: – “Changing the speaker impedance setting (SP IMP.)” (p.135) l The unit’s remote control sensor is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit. l The protection circuitry has been activated because of a short circuit. Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers. For details, see the following: – “Connecting the speaker” (p.18) l The remote control IDs of the unit and the remote control are not identical. Change the remote control ID of the unit or the remote control. For details, see the following: – “Selecting the remote control ID (REMOTE ID)” (p.135) l The remote control is set to the Zone2 operation mode. Set the remote control to the Main zone operation mode. For details, see the following: – “Part names and functions of the remote control” (p.15) 140 En n Cannot select the desired input source even if “INPUT” Audio trouble is pressed n No sound l The function which skips some input sources is set. Set “Input Skip” of the desired input source in the “Setup” menu to “Off”. For details, see the following: – “Setting input sources to be skipped when operating the INPUT key” (p.127) l Another input source is selected. Select an appropriate input source with the input selection keys. For details, see the following: – “Basic procedure for playing back video and music” (p.56) n The RED/GREEN/YELLOW/BLUE keys of the remote l Signals that the unit cannot reproduce are being input. Some digital audio formats cannot be played back on the unit. Ensure that the signals are types that the unit is able to play back. For details on supported file formats, HDMI audio formats or compatible decoding format, see the following: – “Supported file formats” (p.168) – “Specifications” (p.174) control do not operate l The device which is connected to the unit via HDMI does not support the operation of the RED/GREEN/YELLOW/BLUE keys. Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE keys. l The power of Zone2 is not turned on. Slide the Zone switch to “ZONE 2”, and then press z (receiver power) to the power of Zone2 turns on. For details, see the following: – “Controlling Zone2” (p.54) l The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's remote control have been changed. Set the “Color Key” settings in the “Setup” menu to “Default”. For details, see the following: – “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control” (p.130) l The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable. n The volume cannot be increased l The maximum volume is set too low. Use “Max Volume” in the “Setup” menu to adjust the maximum volume. For details, see the following: – “Setting the limit value of the volume” (p.109) l A device connected to the output jacks of the unit is not turned on. Turn on all devices connected to the output jacks of the unit. 141 En n No sound is coming from a specific speaker n No sound is coming from the subwoofer l The playback source does not contain a signal for the channel. To check it, display information about the current audio signal on the TV. For details, see the following: – “Checking the current audio signal information” (p.101) l The playback source does not contain Low Frequency Effect (LFE) or lowfrequency signals. To check it, set “Extra Bass” in the “Option” menu to “On”, in order to output the front channel low-frequency components from the subwoofer. For details, see the following: – “Setting the use of Extra Bass” (p.83) l The currently selected sound program/decoder does not use the speaker. To check it, use “Test Tone” in the “Setup” menu. For details, see the following: – “Outputting test tones” (p.100) l Subwoofer output is disabled. Perform YPAO or set “Subwoofer” in the “Setup” menu to “Use”. For details, see the following: – “Optimizing the speaker settings automatically (YPAO)” (p.38) – “Setting the use of a subwoofer” (p.98) l Audio output of the speaker is disabled. Perform YPAO or use “Configuration” in the “Setup” menu to change the speaker settings. For details, see the following: – “Optimizing the speaker settings automatically (YPAO)” (p.38) – “Setting the use of a subwoofer” (p.98) – “Setting the size of the front speakers” (p.94) – “Setting the use of a center speaker and its size” (p.95) – “Setting the use of surround speakers and their size” (p.95) – “Setting the use of surround back speakers and their size” (p.96) – “Setting the use of presence speakers and their size” (p.97) l The volume of the subwoofer is too low. Adjust the volume on the subwoofer. l The subwoofer has been turned off by its auto-standby function. Disable the auto-standby function of the subwoofer or adjust its sensitivity level. l The volume of the speaker is set too low. Perform YPAO or use “Level” in the “Setup” menu to adjust the speaker volume. For details, see the following: – “Optimizing the speaker settings automatically (YPAO)” (p.38) – “Adjusting the volume of each speaker” (p.99) l The speaker cable connecting the unit and the speaker is defective. Check the unit’s SPEAKERS terminals and the speaker’s terminals. If there is no problem with the connection, replace a breaking speaker cable with another speaker cable. l The speaker is malfunctioning. To check it, replace with another speaker. If the problem persists with using another speaker, the unit may be malfunctioning. 142 En n No sound from the playback device connected to the n Only the front speakers work on multichannel audio l The TV does not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications. l The playback device is set to output 2-channel audio (such as PCM) only. To check it, display information about the current audio signal on the TV. If necessary, change the digital audio output setting on the playback device. For details, see the following: – “Checking the current audio signal information” (p.101) unit with HDMI l The number of devices connected to the HDMI OUT jack exceeds the limit. Disconnect some of the HDMI devices. n No sound from the playback device when HDMI Control is used n Noise/hum is heard l The unit is too close to another digital or radio frequency device. Move the unit further away from the device. l The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the playback device audio is output from the speakers connected to the unit. l The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable. l TV audio is selected as the input source. Select an appropriate input source with the input selection keys. n The sound is distorted n No sound from the TV when HDMI Control is used l The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the TV audio is output from the speakers connected to the unit. l A TV that does not support ARC is connected to the unit only with an HDMI cable. Use a digital optical cable to make an audio connection. For details, see the following: – “HDMI connection with a TV” (p.29) l The volume of the unit is too high. Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to “Off”. For details, see the following: – “Setting the use of the eco mode” (p.132) l A device (such as an external power amplifier) connected to the unit’s audio output jacks is not turned on. Turn on all devices connected to the unit’s audio output jacks. l If the TV is connected to the unit with an audio cable, the TV audio input setting does not match the actual connection. Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack. For details, see the following: – “Setting the audio jack used for TV audio input” (p.114) l If you are trying to use ARC, ARC is disabled on the unit or TV. Set “ARC” in the “Setup” menu to “On”, and enable ARC on the TV. For details, see the following: – “Setting the use of ARC” (p.114) 143 En n No image (contents required the HDCP 2.2 - compatible Video trouble HDMI device) from the playback device n No video l Another input source is selected on the unit. Select an appropriate input source with the input selection keys. l The TV (HDMI input jack) does not support HDCP 2.2. Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2. (The Warning message can be displayed on the TV screen.) l Another input source is selected on the TV. Switch the TV input to display the video from the unit. n The menu of the unit is not displayed on the TV l The video signal output from the unit is not supported by the TV. Check the video output setting of the playback device. For information about video signals supported by the TV, refer to the instruction manuals for the TV. l Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack). l The cable connecting the unit and TV (or playback device) is defective. If there is no problem with the connection, replace with another cable. n The video is interrupted l If you are using two TVs in the Main zone, another TV is turned off when “HDMI OUT 1+2” is selected. Select “HDMI OUT 1” or “HDMI OUT 2” to output the signals only to the TV you are using. For details on selecting HDMI output, see the following: – “Selecting an HDMI output jack” (p.57) n No video from the playback device connected to the unit with HDMI l The input video signal (resolution) is not supported by the unit. To check the information about the current video signal (resolution) and video signals supported by the unit, see the following: – “Checking the current video and HDMI signal information” (p.113) – “HDMI signal compatibility” (p.172) l The TV does not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications. l The number of devices connected to the HDMI OUT jack is over the limit. Disconnect some of the HDMI devices. 144 En FM/AM radio trouble USB trouble n FM radio reception is weak or noisy n The unit does not detect the USB device l There is multi-path interference. Adjust the FM antenna height or orientation, or place it in a different location. l The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. l Your area is too far from the FM station transmitter. To select monaural FM radio reception, set “FM Mode” in the “Option” menu to “Monaural”. Or use an outdoor FM antenna. For details on “FM Mode”, see the following: – “Switching between stereo and monaural for FM radio reception” (p.84) l The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format. n Folders and files in the USB device cannot be viewed l The data in the USB device is protected by the encryption. Use a USB device without an encryption function. n AM radio reception is weak or noisy l The noises may be caused by fluorescent lamps, motors, thermostats, or other electrical equipment. It is difficult to completely eliminate noise. It may be reduced by using an outdoor AM antenna. n Radio stations cannot be selected automatically l Your area is too far from the FM station transmitter. Select the station manually. Or use an outdoor antenna. We recommend using a sensitive multi-element antenna. For details on selecting the station manually, see the following: – “Selecting a frequency for reception” (p.61) n The unit does not perform continuous playback on files of USB device l When the unit detects a series of unsupported files during playback, playback stops automatically. Do not save unsupported files (such as images and hidden files) in folders for playback. l The AM radio signal is weak. Adjust the AM antenna orientation. Select the station manually. Use an outdoor AM antenna. For details on selecting the station manually, see the following: – “Selecting a frequency for reception” (p.61) n AM radio stations cannot be registered as presets l Auto Preset has been used. Auto Preset is for registering FM radio stations only. Register AM radio stations manually. For details, see the following: – “Registering a radio station manually” (p.63) 145 En n The unit does not detect the media server (PC/NAS) Network trouble l The media sharing setting is not correct. Configure the sharing setting and select the unit as a device to which music contents are shared. For details, see the following: – “Media sharing setup on media servers (PCs/NAS)” (p.69) n The network feature does not function l The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on your router and set “DHCP” in the “Setup” menu to “On” on the unit. If you want to configure the network parameters manually, check that you are using an IP address which is not used by other network devices in your network. For details, see the following: – “Setting the network parameters automatically (DHCP)” (p.116) – “Setting the network parameters manually” (p.117) l Some security software installed on your media server is blocking the access of the unit to your media server. Check the settings of security software installed on your media server. l The unit and media server are not in the same network. Check the network connections and your router settings, and then connect the unit and the media server to the same network. l The unit does not support IPv6 network. Connect IPv4 network. l The MAC address filter is enabled on the unit. In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or specify the MAC address of your media server to allow it to access to the unit. For details, see the following: – “Setting the MAC address filter” (p.118) n The unit cannot connect to the Internet via a wireless router (access point) l The wireless router (access point) is turned off. Turn on the wireless router. n The files in the media server (PC/NAS) cannot be viewed or played back l The unit and the wireless router (access point) are too far apart. Place the unit and the wireless router (access point) closer to each other. l The files are not supported by the unit or the media server. Use the file format supported by both the unit and the media server. For information about the file formats supported by the unit, see the following: – “Supported file formats” (p.168) l There is an obstacle between the unit and the wireless router (access point). Move the unit and the wireless router (access point) in a location where there are no obstacles between them. l The wireless router (access point) is set to use the wireless channel 14. Change settings of the wireless router (access point) to use one of the wireless channels from 1 to 13. n Wireless network is not found l Microwave ovens or other wireless devices in your neighborhood might disturb the wireless communication. Turn off these devices. l Access to the network is restricted by the firewall settings of the wireless router (access point). Check the firewall setting of the wireless router (access point). 146 En n The Internet radio cannot be played n The application for mobile devices does not detect the unit l The selected Internet radio station is currently not available. There may be a network problem at the radio station, or the service may have been stopped. Try the station later or select another station. l The unit and mobile device are not in the same network. Check the network connections and your router settings, and then connect the unit and mobile device to the same network. l The selected Internet radio station is currently broadcasting silence. Some Internet radio stations broadcast silence at certain of times of the day. Try the station later or select another station. l Access to the network is restricted by the firewall settings of your network devices (such as the router). Check the firewall settings of your network devices. The Internet radio can be played only when it passes through the port designated by each radio station. The port number varies depending on the radio station. n The iPhone does not recognize the unit when using AirPlay l The MAC address filter is enabled on the unit. In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or specify the MAC address of your mobile device to allow it to access to the unit. For details, see the following: – “Setting the MAC address filter” (p.118) l The unit is connected to a multiple SSID router. Access to the unit might be restricted by the network separation function on the router. Connect the iPhone to the SSID which can access the unit. (Connect it to the Primary SSID at the top of the list.) n Firmware update via the network is failed l The unit is connected to a multiple SSID router. Access to the unit might be restricted by the network separation function on the router. Connect the iPhone to the SSID which can access the unit. (Connect it to the Primary SSID at the top of the list.) l It may not be possible depending on the condition of the network. Update the firmware via the network again or use a USB memory device. For details, see the following: – “Updating the firmware via the network” (p.133) 147 En n No sound is produced, or the sound is interrupted Bluetooth® trouble during playback with Bluetooth® connection n A Bluetooth® connection cannot be established l The volume of the Bluetooth device is set too low. Turn up the volume of the Bluetooth device. l The Bluetooth function of the unit is disabled. Enable the Bluetooth function. For details, see the following: – “Setting the use of Bluetooth®” (p.120) l The Bluetooth device is not set to send audio signals to the unit. Switch the audio output of the Bluetooth device to the unit. l Another Bluetooth device is already connected to the unit. Terminate the current Bluetooth connection and then establish a new connection. For details, see the following: – “Playback Bluetooth® device music on the unit” (p.66) l The Bluetooth connection has been terminated. Establish a Bluetooth connection between the Bluetooth device and the unit again. For details, see the following: – “Playback Bluetooth® device music on the unit” (p.66) l The unit and the Bluetooth device are too far apart. Move the Bluetooth device closer to the unit. l The unit and the Bluetooth device are too far apart. Move the Bluetooth device closer to the unit. l There is a device (such as microwave oven and wireless LAN) that outputs signals in the 2.4 GHz frequency band nearby. Move the unit and the Bluetooth device away from those devices. l There is a device (such as microwave oven and wireless LAN) that outputs signals in the 2.4 GHz frequency band nearby. Move the unit and the Bluetooth device away from those devices. l The Bluetooth device does not support A2DP. Use a Bluetooth device that supports A2DP. l The connection information registered on the Bluetooth device is not working for some reason. Delete the connection information on the Bluetooth device, and then establish a connection between the Bluetooth device and the unit again. For details, see the following: – “Playback Bluetooth® device music on the unit” (p.66) 148 En Error indications on the front display Error indications on the front display Refer to the following table when the error message is indicated on the front display. Message Cause Remedy Access denied Access to the media servers (PCs/NAS) is denied. Configure the sharing settings and select the unit as a device to which music contents are shared. For details, see the following: The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. • “Media sharing setup on media servers (PCs/NAS)” (p.69) Access error There is a problem with the signal path from the network to the unit. Make sure your router and modem are turned on, and check the connection between the unit and your router (or hub). For details, see the following: • “Connecting a network cable (wired connection)” (p.33) • “Preparing wireless antennas (wireless connection)” (p.34) Check SP Wires The speaker cables are short circuited. Twist the bare wires of the cables firmly and connect to the unit and speakers properly. For details, see the following: Internal Error An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center. No content There are no playable files in the selected folder. Select a folder that contains files supported by the unit. No device The unit cannot detect the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The network cable is not connected. Connect the network cable properly. The wireless router (access point) is not found. Make sure the wireless router (access point) is turned on. Please wait The unit is preparing for connecting to the network. Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn it on again. RemID Mismatch The remote control IDs of the unit and the remote control are not identical. • “Connecting the speaker” (p.18) Not connected Change the remote control ID of the unit or the remote control. For details, see the following: • “Selecting the remote control ID (REMOTE ID)” (p.135) The unit cannot play back the songs stored on the iPhone for some Check the song data. If it cannot be played on the iPhone itself, the song data or storage area may be reason. defective. The unit cannot play back the songs stored on the media servers (PCs/NAS) for some reason. Ensure that the files are types that the unit is able to play back. If the unit supports the file format, but still cannot play back any files, the network may be overloaded with heavy traffic. For information about the formats supported by the unit, see the following: USB Overloaded An overcurrent is flowing through the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. Version error Firmware update failed. Unable to play • “Supported file formats” (p.168) Update the firmware again. For details, see the following: • “Updating the firmware (UPDATE)” (p.138) • “Updating the unit’s firmware via the network” (p.152) 149 En Message Cause Update failed. Firmware update failed. FILE NOT READY Preparation for firmware update is not finish yet. Remedy Press STRAIGHT and select a firmware updating method, then press INFO to update the firmware again. For details, see the following: • “Updating the firmware (UPDATE)” (p.138) • “Updating the unit’s firmware via the network” (p.152) Wait a while before updating the firmware again. 150 En APPENDIX Updating the unit’s firmware via the network Firmware updates Notice New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, new firmware is downloaded via the network. When a firmware update is ready, the following message appears after SETUP is pressed. ▪ Do not operate the unit or disconnect the power cable or network cable during firmware update. If the firmware update is interrupted, there is a possibility that the unit will malfunction. In this case, contact your nearest authorized Yamaha dealer or service center to request repair. Note ▪ The firmware update indicator on the front display lights up when a firmware update is ready. This indicator might not light up when the network connection speed is too slow or a later firmware update is available. ▪ Firmware update takes about 20 minutes or more. ▪ You might not get the message or the lighting up firmware update indicator on the front display depending on the condition of the network connection. In this case, update the firmware using the USB memory device. For details, see the following: – “Updating the firmware (UPDATE)” (p.138) ▪ For details on firmware updates, visit the Yamaha website. For details on the firmware update, see the following: • “Updating the unit’s firmware via the network” (p.152) 151 En Updating the unit’s firmware via the network Confirm the on-screen description displayed after SETUP is pressed, and start the firmware update. 1 2 Read the on-screen description. Use the cursor keys to select “START” and press ENTER. The on-screen display turns off and the firmware update begins. 3 If “UPDATE SUCCESS PLEASE POWER OFF!” appears on the front display, press MAIN ZONE z on the front panel. The firmware update is complete. Note ▪ Firmware update takes about 20 minutes or more. ▪ You might not get the message or the lighting up firmware update indicator on the front display depending on the condition of the network connection. In this case, update the firmware using the USB memory device. For details on using the USB memory device, see the following: – “Updating the firmware (UPDATE)” (p.138) ▪ For details on update, visit the Yamaha website. ▪ If you want to perform update when turning off the unit, use the cursor keys to select “LATER” and press ENTER in step 2. When you turn off the unit, a screen asking you to confirm the firmware update is displayed, and press ENTER to start the firmware update. After the firmware update is complete, the unit will turn off automatically. ▪ To perform update when turning off the unit, refer to the following instructions and supplementary explanations. – The firmware update can be started by pressing INFO on the front panel. – The unit turns off automatically without performing the firmware update if two minutes pass after the screen to confirm the firmware update is displayed. – To cancel the firmware update process, press RETURN, and the unit will turn off. – The unit turns off without performing the firmware update if you turn off the unit with AV CONTROLLER or MusicCast CONTROLLER. 152 En Connecting to a network wirelessly Selecting a wireless network connection method 1 2 Select a wireless connection method according to your network environment. Note ▪ You need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters manually. For details, see the following: 3 4 5 – “Setting the network parameters manually” (p.117) ▪ When the unit is added to a MusicCast network, the network settings can be configured at the same time. If you use MusicCast, this method is recommended. For details, see the following: – “Adding the unit to the MusicCast network” (p.44) Internet Wireless router 6 7 Modem Press z (receiver power) to turn on the unit. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). Press SETUP. Use the cursor keys to select “Network” and press ENTER. Use the cursor keys to select “Network Connection” and press ENTER. Use the cursor keys to select “Wireless(Wi-Fi)” and press ENTER. Use the cursor keys to select “OK” and press ENTER. The following connection methods are available. • “Setting up a wireless connection using the WPS button” (p.154) • “Setting up a wireless connection using an iOS device” (p.154) • “Setting up a wireless connection by selecting from the list of available access points” (p.156) Mobile device (such as iPhone) The unit • “Setting up a wireless connection manually” (p.157) • “Setting up a wireless connection by using the WPS PIN code” (p.159) 153 En Setting up a wireless connection using the WPS button Setting up a wireless connection using an iOS device You can set up a wireless connection by applying the connection settings on iOS devices (iPhone/iPad/iPod touch). You can easily set up a wireless connection with one push of the WPS button. Before proceeding, confirm that your iOS device is connected to a wireless router. Setup menu Note “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 3 4 ▪ This process will restore the default settings for the following. – Network settings Use the cursor keys to select “WPS Button” and press ENTER. – Bluetooth settings – Bluetooth, USB, media server and network content registered as shortcuts Use the cursor keys to select “NEXT” and press ENTER. – Internet radio stations registered to “Favorites” – Account information for the network services Read the on-screen description and push the WPS button on the wireless router (access point). ▪ You need iOS device with iOS 7 or later. (The following procedure is a setup example for iOS 10.) Use the cursor keys to select “CONNECT” and press ENTER. Setup menu When the connection process finishes, “Completed” appears on the front display. “Network” > “Network Connection” > “Wireless(Wi-Fi)” ▪ This configuration does not work if the security method of your wireless router (access point) is WEP. In this case, use other connection method. If “Not connected” appears, repeat from step 1 or try another connection method. This completes the network settings. Note ▪ The unit may not connect to the wireless router (access point) using WEP as the encryption method. In this case, try another connection method. ▪ You can use INFO (WPS) on the front panel. Hold down INFO (WPS) for a few seconds to set up a wireless connection and then “Press WPS button on Access Point” appears on the front display, push the WPS button. About WPS ▪ WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy establishment of a wireless home network. 154 En 1 2 3 5 Use the cursor keys to select “Share Wi-Fi Settings (iOS)” and press ENTER. Select the network (access point) of which you want to share the settings with the unit. Tap here to start setup Use the cursor keys to select “NEXT” and press ENTER. Read the on-screen description and select “NEXT” and then, press ENTER. The network currently selected Note When you use wired network connection, a warning message is displayed on the screen. Disconnect the network cable from the unit, and then press ENTER. 4 When the sharing process finishes, the unit is automatically connected to the selected network (access point) and “Completed” appears on the front display. On the iOS device, select the unit as the AirPlay speaker in the WiFi screen. If “Not shared” or “Not connected” appears, press ENTER to repeat from step 1 or try another connection method. iOS 10 (example of English version) 6 Press SETUP. This completes the network settings. The name of the unit 155 En Setting up a wireless connection by selecting from the list of available access points 2 After searching for access points, the list of available access points appears on the TV. You can set up a wireless connection by selecting an access point from the list of wireless LAN routers (access points) found by the unit. You need to manually enter the security key. 3 Setup menu Use the cursor keys to select the desired access point and press ENTER. A check mark is put on the desired access point. “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 Use the cursor keys to select “NEXT” and press ENTER. 4 Use the cursor keys to select “Access Point Scan” and press ENTER. Use the cursor keys to select “NEXT” and press ENTER. The edit screen appears. 5 156 En Use the cursor keys and ENTER to enter the security key. 6 Setting up a wireless connection manually When finished entering the key, use the cursor keys to select “NEXT” and press ENTER. You can set up a wireless connection by entering the required information manually. You need to set up the SSID (network name), encryption method and security key for your network. The wireless connection setting screen appears on the TV. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Access Point X Use the cursor keys to select “Manual Setting” and press ENTER. Use the cursor keys to select “NEXT” and press ENTER. The edit screen appears. 3 7 Use the cursor keys to select “CONNECT” and press ENTER to start the connection process. When the connection process finishes, “Completed” appears on the TV screen. If “Not connected” appears, repeat from step 1 or try another connection method. 8 Press SETUP. This completes the network settings. 157 En Use the cursor keys and ENTER to enter the SSID of the access point. 4 5 9 When finished entering the key, use the cursor keys to select “NEXT” and press ENTER. When the connection process finishes, “Completed” appears on the TV screen. Use the cursor keys to select the encryption method. Choices If “Not connected” appears, check that all the information is entered correctly, and repeat from step 1. None, WEP, WPA-PSK(AES), Mixed Mode 10 Note If you select “None”, the connection may be insecure since the communication is not encrypted. 6 Press SETUP. This completes the network settings. Use the cursor keys to select “NEXT” and press ENTER. The edit screen appears. Note If you select “None” in step 5, this item is not available. 7 8 Use the cursor keys to select “CONNECT” and press ENTER to start the connection process. Use the cursor keys and ENTER to enter the security key. When finished entering the key, use the cursor keys to select “NEXT” and press ENTER. The manual setting screen appears on the TV. 158 En Setting up a wireless connection by using the WPS PIN code You can set up a wireless connection by entering the unit’s PIN code into the wireless router (access point). The method is available if the wireless router (access point) supports the WPS PIN code method. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 2 Use the cursor keys to select “PIN Code” and press ENTER. Use the cursor keys to select “NEXT” and press ENTER. The list of available access points appears on the TV. 3 4 Use the cursor keys to select the desired access point and press ENTER. Use the cursor keys to select “NEXT” and press ENTER. The PIN code of the unit appears on the TV screen. 5 Enter the unit’s PIN code into the wireless router (access point). For details on settings, refer to the instruction manual of the wireless router (access point). 6 Use the cursor keys to select “CONNECT” and press ENTER to start the connection process. When the connection process finishes, “Completed” appears on the TV screen. If “Not connected” appears, repeat from step 1 or try another connection method. 7 Press SETUP. This completes the network settings. 159 En Input/output jacks and cables Video/audio jacks Video jacks n HDMI jacks n COMPONENT VIDEO jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit video signals separated into three components: luminance (Y), chrominance blue (Pb), and chrominance red (Pr). Use a component video cable with three plugs. 1 ( 1 MOVIE) 2 (5 STB) HDMI cable Component video cable Note ▪ Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m (16.4 ft) long to prevent signal quality degradation. ▪ The unit’s HDMI jacks support the HDMI Control, Audio Return Channel (ARC), and 3D and 4K Ultra HD video transmission (through output) features. n VIDEO jacks Transmit analog video signals. Use a video pin cable. ▪ Use a Premium High Speed HDMI Cable or Premium High Speed Cable with Ethernet to enjoy 3D or 4K Ultra HD videos. AV 2 160 En Video pin cable Audio jacks n OPTICAL jack Transmit digital audio signals. Use a digital optical cable. If there is a protective cap on the tip of the cable, remove it before using the cable. AUDIO 1 Digital optical cable (7 TV ) OPTICAL n COAXIAL jacks Transmit digital audio signals. Use a digital coaxial cable. Digital coaxial cable AUDIO 3 COAXIAL n AUDIO jacks Transmit analog stereo audio signals. (Stereo L/R jacks) Use a stereo pin cable (RCA cable). AUDIO 4 Stereo pin cable (Stereo mini jack) Use a stereo mini-plug cable. Stereo mini-plug cable AUDIO 161 En Using presence speakers Presence speaker layout The following three layout patterns are available for the presence speakers. Choose a layout pattern that suits your listening environment. • Front Height Installing the presence speakers in Overhead position Install the presence speakers to the ceiling above the listening position (Overhead). It delivers realistic overhead sound effects and sound field with excellent linkage of front and rear sound spaces effectively. • Overhead • Dolby Enabled SP Note Caution ▪ Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified contractor or dealer personnel for installation works. ▪ You can enjoy Dolby Atmos, DTS:X or Cinema DSP 3D with any layout pattern. ▪ When using presence speakers, configure the “Layout” setting in the “Setup” menu before automatically optimizing the speaker settings (YPAO). For details, see the following: – “Setting the layout of the presence speakers” (p.97) Installing the presence speakers in Front Height position Install the presence speakers on the front wall (Front Height). It delivers a natural sound field with excellent linkage of left, right, top and bottom sound spaces, and sound extensity effectively. Note When installing presence speakers to a ceiling, install them just above the listening position, or the ceiling between the extensions of the front speakers and listening position. 162 En Using Dolby Enabled speakers as the presence speakers Use Dolby Enabled speakers as the presence speakers. This utilizes sound reflected from ceiling and lets you enjoy overhead sound only from speakers that are placed at the same level as traditional speakers. Note ▪ Place the Dolby Enabled speakers on top of or near the traditional front speakers. ▪ A Dolby Enabled speaker unit may be integrated into a traditional speaker. For details, refer to the instruction manual of the Dolby Enabled speakers. 163 En Glossary Glossary of audio information Dolby TrueHD Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray Disc). n Glossary of audio decoding format This is a glossary of the technical terms related to audio decoding format used in this manual. DTS 96/24 DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit audio. This format remains fully compatible with the existing multichannel audio systems that support DTS Digital Surround. This technology is used for music DVDs, etc. Dolby Atmos Introduced first in the cinema, Dolby Atmos brings a revolutionary sense of dimension and immersion to the Home Theater experience. Dolby Atmos is an adaptable and scalable object based format that reproduces audio as independent sounds (or objects) that can be accurately positioned and move dynamically throughout the 3 dimensional listening space during playback. A key ingredient of Dolby Atmos is the introduction of a height plane of sound above the listener. DTS Dialog Control DTS Dialog Control allows you to boost the dialog. This can be useful in noisy environments to help make the dialog more intelligible. People with impaired hearing may also benefit. Note that the content creator may disable the use of this feature in the mix, so that DTS Dialog Control may not always be available. Note that updates to your AVR may add more functionality to DTS Dialog Control or increase the range of the feature. Dolby Atmos Stream Dolby Atmos content will be delivered to your Dolby Atmos enabled AV receiver via Dolby Digital Plus or Dolby TrueHD on Blu-ray Disc, downloadable files and streaming media. A Dolby Atmos stream contains special metadata that describes the positioning of sounds within the room. This object audio data is decoded by a Dolby Atmos AV receiver and scaled for optimum playback through Home Theater speaker systems of every size and configuration. DTS Digital Surround DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. DTS-ES Dolby Digital DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a surround back sound is recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a discrete surround back channel is recorded. Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD disc. Dolby Digital Plus Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems that support Dolby Digital. This technology is used for audio streaming services on the Internet and audio on BD (Blu-ray Disc). Dolby Enabled Speaker A convenient alternative to speakers built into the ceiling, products utilizing Dolby speaker technology employ the ceiling above you as a reflective surface for reproducing audio in the height plane above the listener. Dolby enabled speakers feature a unique upward firing driver and special signal processing that can be built into a conventional speaker, or a standalone speaker module, minimally impacting the overall speaker system footprint while providing an immersive listening experience during Dolby Atmos and Dolby surround playback. Dolby Surround DTS Express DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray Disc). DTS-HD High Resolution Audio DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports 7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on most BD (Blu-ray Disc). DTS-HD Master Audio DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray Disc). Dolby surround is a next generation surround technology that intelligently up mixes stereo; 5.1 and 7.1 content for playback through your surround speaker system. Dolby surround is compatible with traditional speaker layouts, as well as Dolby Atmos enabled playback systems that employ in-ceiling speakers or products with Dolby speaker technology. DTS Neo: 6 DTS Neo: 6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music mode” for music sources and “Cinema mode” for movie sources. This technology provides discrete full-bandwidth matrix channels of surround sound. 164 En DTS:X WAV DTS:X is the next generation object-based, multi-dimensional audio technology from DTS. Unbound from channels, DTS:X conveys the fluid movement of sound to create an incredibly rich, realistic and immersive soundscape - in front of, behind, beside and above the audience - more accurately than ever before. DTS:X offers the ability to automatically adapt the audio to the speaker layout that best fits the space, from a television’s built-in speakers to a home surround theater system to a dozen or more speakers in a commercial cinema. Immerse yourself at www.dts.com/dtsx Windows standard audio file format, which defines the method of recording the digital data obtained by converting audio signals. By default, the PCM method (no compression) is used, but you can also use other compression methods. DSD (Direct Stream Digital) DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super Audio CDs). The signals are stored at a high-frequency sampling rate (such as 11.2 MHz). The highest frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology offers better audio quality than that used for CDs. FLAC WMA (Windows Media Audio) One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing data quantity by about 1/20 maintaining a certain level of audio quality. n Glossary of audio information other than audio decoding format This is a glossary of the technical terms related to audio information used in this manual. FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio formats in compression rate but provides higher audio quality. MP3 Bi-amplification connection (Bi-amp) One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing data quantity by about 1/10 maintaining a certain level of audio quality. A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a consequence, the tweeter and woofer provide clear audio signal without the interference. MPEG-4 AAC LFE (Low Frequency Effects) 0.1 channel An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming services on Internet because it allows a high compression rate of data while maintaining better audio quality than MP3. This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio effects. This channel is labeled 0.1 because it is limited to only low frequency audio. Neural:X Neural:X is the latest downmixing/upmixing and spatial remapping technology from DTS. It is built in to DTS:X to provide upmix of Neural:X-encoded and non-encoded (PCM) data. In DTS:X for AVRs and Sound Bars, Neural:X can produce up to 11.x channels. PCM (Pulse Code Modulation) Lip sync Video output sometimes lags behind audio output due to the complexity of signal processing caused by an increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag between audio and video output. PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This technology is the basis of all other audio format. This technology is used as a lossless audio format called Linear PCM for audio on a variety of media, including CDs. Glossary of HDMI and video information Sampling frequency/Quantization bit This is a glossary of the technical terms related to HDMI and video information used in this manual. Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. Component video signal • Sampling frequency Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate. When the sampling frequency is higher, the range of frequencies that can be played back are wider. With the component video signal system, the video signal is separated into the Y signal for luminance and the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. • Quantization bit The number of quantization bits indicate the degree of accuracy when converting the sound level into a numeric value. When the number of quantized bits is higher, the expression of the sound level is more accurate. With the composite video signal system, color, brightness, and synchronization data signals are combined and transmitted with a single cable. Composite video signal 165 En Deep Color Glossary of network information Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate on-screen color banding for smooth tonal transitions and subtle gradations between colors. This is a glossary of the technical terms related to network information used in this manual. HDCP Wi-Fi HDCP (High-bandwidth Digital Content Protection) is a digital copy protection form that prevents copying of digital contents as it travels across connections (such as HDMI). Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or connect to the Internet wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the complexity of making connections with LAN cables by using wireless connection. Only products that complete Wi-Fi Alliance interoperability tests can carry the “Wi-Fi Certified” trademark. HDMI HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/ video signal transmission. This interface transmits both digital audio and digital video signals using a single cable without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a secure audio/video interface. For further information on HDMI, visit the HDMI website at “http://www.hdmi.org/”. x.v.Color SSID SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point. WPS WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy establishment of a wireless home network. Glossary of Yamaha technologies “x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid, natural images. This is a glossary of the technical terms related to Yamaha technologies used in this manual. CINEMA DSP (Digital Sound Field Processor) Since the surround sound systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP, Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own home. CINEMA DSP 3D The actually measured sound field data contain the information of the height of the sound images. CINEMA DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the accurate and intensive 3D sound fields in a listening room. Compressed Music Enhancer The Compressed Music Enhancer feature compensates for missing harmonics in compression music formats (such as MP3). As a result, this technology provides improved performance for the overall sound system. SILENT CINEMA Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound program, so that accurate representations of all the sound programs can be enjoyed on headphones. Virtual CINEMA DSP Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with front left and right speakers. Even if the surround speakers are not connected, the unit creates the realistic sound field in a listening room. 166 En Virtual CINEMA FRONT Supported devices and file formats Virtual CINEMA FRONT allows the system to virtually reproduce the sound field of the surround speakers with front surround speakers. Even if the surround speakers placed in the front, the unit creates the realistic sound field in a listening room. Supported Bluetooth® devices Virtual Presence Speaker (VPS) Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without presence speakers. Even if the presence speakers are not connected, the unit creates the 3D sound field in your room. The following Bluetooth devices can be used by the unit. Virtual Surround Back Speaker (VSBS) • Operation of all Bluetooth devices cannot be guaranteed. Virtual Surround Back Speaker allows the system to virtually reproduce the sound field of the surround back speakers with surround speaker. Even if the surround back speakers are not connected, the unit adds a sense of depth to the rear sound filed of CINEMA DSP. Supported USB devices YPAO (Yamaha Parametric room Acoustic Optimizer) • Bluetooth devices that support A2DP can be used. The following USB devices can be used by the unit. The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. • This unit is compatible with USB memory devices that are in FAT16 or FAT32 format. Do not connect any other type of USB devices. • USB devices with encryption cannot be used. • Operation of all USB devices cannot be guaranteed. Supported AirPlay devices AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and PC with iTunes 10.2.2 or later. Made for. iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s iPad Pro (10.5″), iPad Pro (12.9″) 2nd Generation, iPad Pro (12.9″) 1st Generation, iPad Pro (9.7″), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad (5th generation), iPad (4th generation), iPad (3rd generation), iPad 2 iPod touch (6th generation), iPod touch (5th generation) (as of February 2018) 167 En Supported file formats Video signal flow The following file formats can be used by the unit. File Sampling frequency (kHz) WAV * 32/44.1/48/ 88.2/96/ 176.4/192 Quantization bit (bit) 16/24/32 Bitrate (kbps) - Number of channels 2 Video device 32/44.1/48 - 8 to 320 2 - WMA 32/44.1/48 - 8 to 320 2 - MPEG-4 AAC 32/44.1/48 - 8 to 320 2 - FLAC 32/44.1/48/ 88.2/96/ 176.4/192 16/24 - 2 4 ALAC 32/44.1/48/ 88.2/96 16/24 - 2 4 AIFF 32/44.1/48/ 88.2/96/ 176.4/192 2.8 MHz/ 5.6 MHz/ 11.2 MHz Video signals input from a video device to the unit are output to a TV as follows. The unit HDMI in 16/24/32 1 - - 2 2 TV 4 MP3 DSD Video signal flow Support for gapless playback HDMI HDMI HDMI COMPONENT VIDEO in 4 Y - AV 1 AV 1 COMPONENT VIDEO COMPONENT VIDEO PB PR * Linear PCM format only. 32 bit-float files cannot be played back. Y PB PR VIDEO in • The playable file formats differ depending on the software installed on media servers (PCs/NAS). Refer to the instruction manual of the server software for details. VIDEO • Digital Rights Management (DRM) contents cannot be played back. 168 En VIDEO HDMI out HDMI Video conversion table Video conversion table is shown as follows. Note ▪ You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” in the “Setup” menu. For details, see the following: – “Setting the use of the video signal processing” (p.113) ▪ The unit does not convert 480-line and 576-line video signals interchangeably. HDMI out Resolution 480i/ 576i 480p/ 576p 720p 1080i 1080p 4K m m m m m m m m m m m 720p m m m m 1080i m m m m 1080p/50, 60 Hz m m 480i/576i 480p/576p HDMI in 1080p/24 Hz m m m m 4K m COMPONENT VIDEO in 480i/576i m m m m m m VIDEO in 480i/576i m m m m m m m: Available 169 En Additional information on HDMI (Example) HDMI Control and synchronized operations HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. You can also control external devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable. HDMI Control Playback starts Turns on and displays video from the playback device Press SCENE1 Operations available from the TV’s remote control Note • Standby ▪ HDMI Control might not work properly. • Volume control including mute ▪ For details on the scene selection, see the following: • Switching to input audio from the TV when the TV input is switched to its built-in tuner – “Selecting a registered scene” (p.73) ▪ For details on TV audio input, see the following: • Switching to input video/audio from the selected playback device – “Setting the audio jack used for TV audio input” (p.114) • Switching between audio output devices (the unit or TV speaker) ▪ For details on the functions for the RED/GREEN/YELLOW/BLUE keys, see the following: – “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control” (p.130) (Example) HDMI Control To use HDMI Control, you need to perform the following HDMI Control link setup after connecting the TV and playback devices. HDMI Control For details on settings and operating your TV, refer to the instruction manual for the TV. Playback device also turns off Note The unit turns off (standby) This setup is required every time you add a new HDMI Control-compatible device to your system. Turn off the TV 1 2 Operations available from the unit’s remote control • Starting playback on the playback device and turning on the TV with a scene selection • Switching the TV input to display the “Setup” menu (when SETUP is pressed) Turn on the unit, TV, and playback devices. Enable the HDMI Control function on the unit, TV and HDMI Control-compatible playback devices (such as BD/DVD players). In order to enable the HDMI Control function on the unit, set “HDMI Control” in the “Setup” menu to “On”, and then configure the settings in related items (“TV Audio Input”, “Standby Sync” and “ARC”). For details, see the following: ▪ “Setting the use of HDMI Control” (p.114) • Controlling the external device from which video is displayed on the TV (playback and menu operations) • Controlling the TV when you select TV audio input that is set in “TV Audio Input” in the “Setup” menu • Controlling the TV with the color (RED/GREEN/YELLOW/BLUE) keys of the remote control when “TV Control” is set for the color keys 3 170 En Turn off the main power of the TV and then turn off the unit and playback devices. 4 5 6 Turn on the unit and playback devices and then turn on the TV. Audio Return Channel (ARC) Switch the TV input to display the video from the unit. ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal to the TV. Check the following after the HDMI Control settings. Check that the input, to which the playback device is connected on the unit, is selected. Note For details on the HDMI Control settings, see the following: If not, select the input source manually. 7 8 ▪ “HDMI Control and synchronized operations” (p.170) 1 2 Check that the video from the playback device is displayed on the TV. Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. Select a TV program with the TV remote control. Check that the input source of the unit will be automatically switched to “AUDIO1” and the TV audio will be played back on the unit. If you cannot hear the TV audio, check the following: Note ▪ If HDMI Control does not work properly, the problem may be solved by turning the playback device off and on again, or by unplugging the power plug and plugging it in again. Also, HDMI Control may not work properly if the number of connected devices exceeds the limit. In this case, disable HDMI Control on devices not in use. • “ARC” in the “Setup” menu is set to “On”. For details, see the following: – “Setting the use of ARC” (p.114) • The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked “ARC”) on the TV. ▪ If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on the TV. Some HDMI jack on the TV is not compatible with ARC. For details, refer to the instruction manual for the TV. ▪ We recommend using TV and playback devices from the same manufacturer so that HDMI Control works more effectively. Note ▪ If the audio is interrupted while using ARC, set “ARC” in the “Setup” menu to “Off” and use a digital optical cable to input TV audio to the unit. For details, see the following: – “Setting the use of ARC” (p.114) – “OPTICAL jack” (p.161) ▪ When using ARC, connect a TV with an HDMI cable that supports ARC. ▪ “AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 1 jacks, use “TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the SCENE function, you also need to change the input assignment for SCENE (7). For details, see the following: – “Setting the audio jack used for TV audio input” (p.114) – “Registering a scene” (p.75) 171 En HDMI signal compatibility Confirm the following HDMI signal used by the unit. • When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending on the type of the DVD player. • The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction manual for each device. • To decode audio bitstream signals on the unit, set the playback device appropriately so that the device outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device). For details, refer to the instruction manual for the playback device. • If the playback device can decode the bitstream audio signals of audio commentaries, you can play back the audio sources with the audio commentaries mixed down by using digital audio input (OPTICAL or COAXIAL jacks). For details, refer to the instruction manual for the playback device. The unit is not compatible with audio commentaries for BD, such as audio content downloaded from the internet. 172 En Trademarks Trademarks The trademarks used in this manual are as follows. x.v.Color™ Google Noto Fonts “x.v.Color” is a trademark of Sony Corporation. This product uses the following fonts. Windows™ Copyright © June 2015, Google (https://www.google.com/get/noto/#sans-lgc), with Reserved Font Name Noto Sans Version 1.004. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Dolby Vision, and the double-D symbol are trademarks of Dolby Laboratories. Internet Explorer, Windows Media Audio and Windows Media Player are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. This Font Software is licensed under the SIL Open Font License, Version1.1. This license is available with a FAQ at: http://scripts.sil.org/OFL Android™ Google Play™ Android and Google Play are trademarks of Google Inc. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. Copyright © June 2015, Google (https://www.google.com/get/noto/help/cjk/), with Reserved Font Name Noto Sans CJK Version 1.004. The Wi-Fi CERTIFIED™ Logo and Wi-Fi Protected Setup are certification marks of Wi-Fi Alliance®. Wi-Fi, Wi-Fi CERTIFIED, Wi-Fi Protected Setup and WPA2 are registered trademarks or trademarks of Wi-Fi Alliance®. Explanations regarding GPL This product utilizes GPL/LGPL open-source software in some sections. You have the right to obtain, duplicate, modify, and redistribute this open-source code only. For information on GPL/ LGPL open source software, how to obtain it, and the GPL/LGPL license, refer to the Yamaha Corporation website (http://download.yamaha.com/sourcecodes/musiccast/). Licenses For information on the licenses of the third-party software in this product, refer to the following. http://(IP address of this product*)/licenses.html Supports iOS 7 or later for setup using Wireless Accessory Configuration. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. * IP address of this product is checked with MusicCast CONTROLLER. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. “SILENT CINEMA” is a trademark of Yamaha Corporation. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iTunes, AirPlay, iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air and iPad mini are trademarks of Apple Inc. MusicCast is a trademark or registered trademark of Yamaha Corporation. App Store is a service mark of Apple Inc. The terms HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Yamaha Eco-Label is a mark that certifies products of high environmental performance. 173 En Specifications Other jacks Specifications • • • • The specifications of this unit are as follows. Input jacks HDMI Analog Audio • Audio x 5 (including PHONO, AUX) HDMI Features: • 4K UltraHD Video (include 4K/60, 50Hz 10/12bit), 3D Video, ARC (Audio Return Channel), HDMI Control (CEC), Auto Lip Sync, Deep Color, “x.v.Color”, HD audio playback, Selectable HDMI input in HDMI standby mode, 21:9 Aspect Ratio, BT.2020 Colorimetry, HDR Compatible Digital Audio (Supported frequencies: 32 kHz to 96 kHz) • Optical x 2 • Coaxial x 2 Video Format (Repeater Mode) • VGA • 480i/60 Hz • 576i/50 Hz • 480p/60 Hz • 576p/50 Hz • 720p/60 Hz, 50 Hz • 1080i/60 Hz, 50 Hz • 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz • 4K/60Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz Video • Component x 1 • Composite x 1 HDMI Input • HDMI x 5 Other jacks • USB x 1 (USB2.0) • NETWORK (Wired) x 1 (100Base-TX/10Base-T) Output jacks Analog Audio • Speaker Out x 9 (7 ch) (FRONT L/R, CENTER, SURROUND L/R, EXTRA SP 1 L/R*1, EXTRA SP 2 L/R*2) *1 YPAO MIC x 1 REMOTE IN x 1 REMOTE OUT x 1 TRIGGER OUT x 1 Note: Assignment is possible [F.PRESENCE, ZONE2] *2 Note: Assignment is possible [SURROUND BACK, ZONE2, BI-AMP] • Pre Out x 2 (FRONT L/R) • Subwoofer Out x 2 (mono x 2) • ZONE2 OUT x 2 (L/R) • Headphone x 1 HDMI Output • HDMI OUT x 2 Audio Format • Dolby Atmos • Dolby TrueHD • Dolby Digital Plus • Dolby Digital • DTS:X • DTS-HD Master Audio • DTS-HD High Resolution Audio • DTS Express • DTS • DSD 2-ch to 6-ch (2.8 MHz) • PCM 2-ch to 8-ch (Max. 192 kHz/24-bit) Content Protection: HDCP 2.2 compatible Link Function: CEC supported 174 En TUNER Compatible Decoding Formats Analog Tuner • [U.K., Europe, Russia and Middle East models] FM/AM with Radio Data System x 1 (TUNER) • [Other models] FM/AM x 1 (TUNER) Decoding Format • Dolby Atmos • Dolby TrueHD, Dolby Digital Plus • Dolby Digital • DTS:X • DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express • DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 USB Capable of Mass Storage Class USB Memory Post Decoding Format • Dolby Surround • DTS Neo: 6 Music, DTS Neo: 6 Cinema • Neural:X Current Supply Capacity: 1.0 A Bluetooth Audio Section Sink Function • Source Device to AVR (ex. Smartphone/Tablet) • Supported profile – A2DP, AVRCP • Supported codec – SBC, AAC Rated Output Power (2-channel driven) • [All models] (20 Hz to 20 kHz, 0.06% THD, 8 Ω) – Front L/R 90 W+90 W • [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω) – Front L/R Bluetooth version • Ver. 4.2 – Center Wireless output • Bluetooth Class 2 105 W+105 W 105 W – Surround L/R 105 W+105 W – Surround Back L/R 105 W+105 W Rated Output Power (1-channel driven) Maximum communication distance • 10 m (33 ft) without interference • [All models] (1 kHz, 0.9% THD, 8 Ω) – Front L/R, Center, Surround L/R, Surround Back L/R Network 125 W/ch • [U.K., Europe, Russia and Middle East models] (1 kHz, 0.9% THD, 4 Ω) – Front L/R PC Client Function 150 W/ch Maximum Effective Output Power (1-channel driven) AirPlay supported Internet Radio Wi-Fi function • Capable of WPS by PIN Method and Push-Button-Method • Capable of sharing with iOS devices by wireless connection • Available Security Method: WEP, WPA2-PSK (AES), Mixed Mode, None • Wireless LAN Standards: IEEE 802.11 a/b/g/n/ac* * 20 MHz channel bandwidth only (1 kHz, 10% THD, 8 Ω) – Front L/R, Center, Surround L/R, Surround Back L/R 150 W/ch (1 kHz, 10% THD, 6 Ω) – Front L/R, Center, Surround L/R, Surround Back L/R 130 W/ch Dynamic Power (IHF) • Front L/R (8/6/4/2 Ω) 125/165/190/235 W Damping Factor • Front L/R, 20 Hz to 20 kHz, 8 Ω 175 En 100 or more Input Sensitivity / Input Impedance Volume Control • PHONO (1 kHz, 100 W/8 Ω) 3.5 mV/47 kΩ • Main Zone MUTE, -80 dB to +16.5 dB (0.5 dB Step) • AV 2 etc. (1 kHz, 100 W/8 Ω) 200 mV/47 kΩ • Zone2 MUTE, -80 dB to +10.0 dB (0.5 dB Step) Tone Control Characteristics Maximum Input Signal • PHONO (1 kHz, 0.1% THD) • AV 2 etc. (1 kHz, 0.5% THD, Effect On) 60 mV • Bass Boost/Cut 2.3 V • Bass Turnover • Treble Boost/Cut Output Level / Output Impedance • Treble Turnover ±6 dB/0.5 dB Step at 50 Hz 350 Hz ±6 dB/0.5 dB Step at 20 kHz 3.5 kHz • PRE OUT – Front L/R 1 V/2.7 kΩ Filter Characteristics • SUBWOOFER 1 V/1.2 kΩ (fc=40/60/80/90/100/110/120/160/200 Hz) • ZONE2 OUT 470 mV/1.7 kΩ • H.P.F. (Front, Center, Surround, Surround Back) 12 dB/oct. • L.P.F. (Subwoofer) 24 dB/oct. Maximum Output Level • PRE OUT 1.6 V Video Signal Type Headphone Jack Rated Output / Impedance • AV 2 etc. (1 kHz, 50 mV, 8 Ω) NTSC/PAL/SECAM 100 mV/560 Ω Video Signal Level Frequency Response • AV 2 etc. to Front (10 Hz to 100 kHz) Video Section +0/-3 dB • Composite 1 Vp-p/75 Ω • Component RIAA Equalization Deviation • PHONO –Y 0±0.5 dB Total Harmonic Distortion – Pb/Pr 1 Vp-p/75 Ω 0.7 Vp-p/75 Ω Video Maximum Input Level • PHONO to Front (20 Hz to 20 kHz, 10 V) 0.02% or less • AV 2 etc. to Front (Pure Direct) (20 Hz to 20 kHz, 50 W, 8 Ω) 0.06% or less 1.5 Vp-p or more FM Section Signal to Noise Ratio (IHF-A Network) • PHONO (Input Shorted 35 mV, Front Speaker Out) • AV 2 etc. (Pure Direct) (Input 1 kΩ Shorted, Speaker Out) 96 dB or more 110 dB or more Residual Noise (IHF-A Network) • Front L/R (Speaker Out) 150 μV or less Channel Separation • PHONO (Input Shorted, 1 kHz/10 kHz) 60 dB/55 dB or more • AV 2 etc. (Input 1 kΩ Shorted, 1 kHz/10 kHz) 70 dB/50 dB or more 176 Tuning Range • [U.S.A. and Canada models] • [Asia, Taiwan, Brazil, General, and Central and South America models] 87.5 MHz to 107.9 MHz 87.5/87.50 MHz to 108.0/108.00 MHz • [U.K. and Europe models] 87.50 MHz to 108.00 MHz • [Other models] 87.50 MHz to 108.00 MHz 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) • Monaural En 3 μV (20.8 dBf) Signal to Noise Ratio (IHF) Standby Power Consumption • Monaural 69 dB • HDMI Control Off, Standby Through Off 0.1 W • Stereo 67 dB • HDMI Control On, Standby Through On (No Signals) 0.8 W • HDMI Control On, Standby through AUTO (HDMI no signal and no CEC for 8 hours) 0.4 W Harmonic Distortion (IHF, 1 kHz) • Monaural 0.5% • Stereo 0.6% • Network Standby On Antenna Input 75 Ω unbalanced 530 kHz to 1710 kHz 530/531 kHz to 1710/1611 kHz • [U.K. and Europe models] 531 kHz to 1611 kHz • [Other models] 531 kHz to 1611 kHz 2.0 W • [Asia, Taiwan, Brazil, Central and South America and General models] 590 W Dimensions (W x H x D) 435 x 171 x 378 mm (17-1/8” x 6-3/4” x 14-7/8”) Reference Dimensions (with wireless antenna upright) * Including legs and protrusions General 435 x 248 x 378 mm (17-1/8” x 9-3/4” x 14-7/8”) Power Supply • [U.S.A. and Canada models] AC 120 V, 60 Hz AC110 to 120/220 to 240 V, 50/60 Hz AC110 to 120 V, 50/60 Hz • [China model] AC 220 V, 50 Hz • [Korea model] AC 220 V, 60 Hz • [Australia model] AC 240 V, 50 Hz • [UK, Europe, Russia and Middle East models] AC 230 V, 50 Hz • [Asia and General models] 1.4 W Maximum Power Consumption • [U.S.A. and Canada models] • [Taiwan model] 1.4 W – Bluetooth – Wireless (Wi-Fi) Tuning Range • [Brazil and Central and South America models] 1.3 W • HDMI Control On, Standby Through On, Network Standby On AM Section • [Asia, Taiwan, Brazil, General, and Central and South America models] – Wired – Wireless (Wi-Fi) Weight 10.5 kg (23.1 lbs) * The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file. AC 220 to 240 V, 50/60 Hz Power Consumption • [U.S.A. and Canada models] 400 W • [Asia, Taiwan, Brazil, Central and South America and General models] 270 W • [Other models] 300 W 177 En Default settings Default settings of the Option menu Video Processing YPAO Result Off Treble, Bass Bypass (0.0 dB) YPAO Volume • YPAO Volume Off • Adaptive DRC Off • Result - Sound Shuffle / Repeat * When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears. • Shuffle Off • Repeat Off FM Mode Stereo Default settings of the Setup menu Information - Lipsync • Delay Enable Enable • Auto/Manual Select Auto • Adjustment 0 ms DSP Parameter - The default settings of the “Setup” menu are as follows. Dialogue • Dialogue Level 0 • DTS Dialogue Control 0 • Dialogue Lift 0 (This setting is available only when one of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when presence speakers are used, or Virtual Presence Speaker (VPS) is working.) Lipsync 0 ms Surround Decoder Speaker • Decode Type Power Amp Assign Basic Configuration • Front Small • Center Small • Surround Small – Layout Rear • Surround Back Small • Front Presence Enhancer Small – Layout – TUNER, (network sources), AirPlay, SERVER, NET RADIO, Bluetooth, USB On • Crossover – Others Off • Subwoofer Front Height 80 Hz Use – Phase Normal Volume Trim • Input Trim 0.0 dB • Subwoofer Trim 0.0 dB Extra Bass Off Direct Video Out The default settings of the “Option” menu are as follows. Tone Control Test Tone • Video Mode Off Distance 3.00 m (10.0 ft) Level 0.0 dB Parametric EQ Through 178 En Auto • Center Spread Off • Center Image 0.3 7ch Stereo • Level 0 • Front / Rear Balance 0 • Left / Right Balance 0 • Height Balance 5 • Monaural Mix Off Dynamic Range Maximum Volume • Max Volume +16.5 dB • Initial Volume Off Adaptive DSP Level On Virtual Speaker • VSBS On Scene Scene Setting - Scene Rename - Video/HDMI Information • Resolution • Aspect - Direct • TV Audio Input • ARC • Standby Sync Language AirPlay Volume Interlock Limited Audio In Network Name Off Auto Audio Receive • Disconnect Off On Auto Off Off • Initial Volume - HDMI Standby Through Off Variable +10.0 dB Off Information Network Connection Wired Network Standby On Auto • Enhancer On • Tone Control Auto • Extra Bass Off 0 Auto Play On DSP Skip • PROGRAM Key • Color Key Off • Main Zone - • Zone2 - Assign1 Default Display Set • Dimmer (Front Display) • Volume • Short Message • Wallpaper 0 dB On Piano Trigger Output • Trigger Mode Zone Rename • Target Zone Power All ECO • Auto Power Standby • Target : Zone2 Enable System Information MAC Address Filter • Filter Off Party Mode Set IP Address • DHCP 0 ms • Left / Right Balance Network (For AV 2, AUX, AUDIO 4-5, PHONO, TUNER, MusicCast Link, SERVER, NET RADIO, Bluetooth, USB only “Manual” can be selected.) Remote Key • Monaural Auto Auto Manual (Default setting may be different depending on the input source.) • Audio Delay • HDMI 1-5 Input Rename On Zone2 • HDMI OUT1 Off On Information • Max Volume HDCP Version Input Skip Multi Zone • Volume - • Others • Bluetooth Standby AUDIO1 English • HDMI 1-5 Bluetooth HDMI Audio Output • HDMI OUT2 - Bluetooth Through HDMI Control • HDMI Control Enable MusicCast Link Power Interlock Video Mode • Video Mode DMC Control - Off 179 En – U.K., Europe, Russia and Korea models – Other models 20 minutes Off • ECO Mode Off Memory Guard Off Firmware Update - Default settings of the ADVANCED SETUP menu The default settings of the “ADVANCED SETUP” menu are as follows. SP IMP. REMOTE ID TU (Asia and General models only) 8 Ω MIN ID1 FM50/AM9 TV FORMAT • U.S.A., Canada, Korea and General models NTSC • Other models PAL MON.CHK YES 4K MODE MODE 1 DTS MODE MODE 1 BKUP/RSTR INIT UPDATE VERSION BKUP CANCEL USB - 180 En Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads http://download.yamaha.com/ Manual Development Group © 2018 Yamaha Corporation Published 02/2018 NV-A0 AV17-0164
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement