Yamaha CRX-N470 / CRX-N470D / MCR-N470 / MCR-N470D / MCR-N570 / MCR-N570D Firmware Update Installation Manual

Yamaha CRX-N470 / CRX-N470D / MCR-N470 / MCR-N470D / MCR-N570 / MCR-N570D Firmware Update Installation Manual
Connecting to a network
Note
Updating the firmware
• When Internet speed is not fast enough or the
unit is connected to the wireless network via a
wireless network adapter, network update may
not be possible depending on the condition of
the wireless connection. In this case, try again or
update the firmware using a USB memory device.
The firmware can be downloaded from the
Yamaha Website.
When a new firmware for the unit is released, a message
to update your current firmware will be shown on the
front panel display (when the unit is connected to the
Internet only).
If this message is shown, follow the steps below to
perform the update.
1
2
3
4
Press
.
To update the firmware using a USB memory
device
Select [Firmware Update] with S/T,
and press
.
1
OPTION
Select [Update] with S/T and press
.
Select [Network] with S/T, and press
.
2, 3, 4
/
ENTER
• Press ENTER again to begin the update.
5
• Do not operate the unit or disconnect the power
cable and network cables while updating.
• When the update finishes, messages are shown in
the following order: “UPDATE SUCCESS”, “PLEASE
...”, and “POWER OFF!”
Press A (Power) on the front panel.
• The update is applied.
22
En
You can download the firmware to a USB memory
device, and connect that USB memory device to
the USB jack on the unit.
• Select [USB] in step 4 to start the update.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement