Yamaha Owner's Manual

Yamaha Owner's Manual
AV Receiver
Owner’s Manual
Read the supplied booklet “Safety Brochure” before using the unit.
English
CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FEATURES
6
7 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
8 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 37
9 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . . 38
Measuring at one listening position (single measure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Measuring at multiple listening positions (multi measure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Checking the measurement results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Reloading the previous YPAO adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
10 Connecting to a network device wirelessly . . . . . . . . . . . . . . . . . . . . 46
Selecting the connection method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
PREPARATIONS
14
General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting the unit to a wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Connecting a mobile device to the unit directly (Wireless Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
PLAYBACK
54
1 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic speaker configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Advanced speaker configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Selecting an HDMI output jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Selecting the input source and favorite settings with one touch
(SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Selecting setting items to be included as scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Connecting to the jacks on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Enjoying stereoscopic sound fields (CINEMA DSP 3D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4 Connecting the FM/AM antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
5 Connecting a network cable or the wireless antenna . . . . . . . . . . . . . 34
Connecting the network cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Connecting the wireless antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Enjoying pure high fidelity sound (Pure Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . 62
Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Registering favorite radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Connecting recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Operating the radio on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Connecting a device with analog multi-channel output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Connecting a device compatible with the trigger function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
En
2
Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
CONFIGURATIONS
97
Playback of iPod content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 70
Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Configuring input sources (Input menu) . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Input menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Configuring the SCENE function (Scene menu) . . . . . . . . . . . . . . . . . . . . 99
Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 73
Scene menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Configuring sound programs/surround decoders
(Sound Program menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Sound Program menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Playback of Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . 105
Registering favorite Internet radio stations (bookmarks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Playing back music with AirPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Speaker (Manual Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Playing back music in multiple rooms (multi-zone) . . . . . . . . . . . . . . . . 82
Multi-zone configuration examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Preparing Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Controlling Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Controlling the unit from a web browser (web control) . . . . . . . . . . . . 89
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Multi Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
Viewing the current status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Viewing information about the unit (Information menu) . . . . . . . . . 123
Viewing the status information on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Types of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Configuring playback settings for different playback sources
(Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Configuring the system settings (ADVANCED SETUP menu) . . . . . . 125
Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Changing the speaker impedance setting (SPEAKER IMP.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Turning on/off the remote control sensor (REMOTE SENSOR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Selecting the remote control ID (REMOTE CON AMP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
Removing the limitation on HDMI video output (MONITOR CHECK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
Backing up/recovering the settings (RECOV./BACKUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
Restoring the default settings (INITIALIZE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
Updating the firmware (FIRM UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Updating the unit’s firmware via the network . . . . . . . . . . . . . . . . . . . 129
En
3
APPENDIX
130
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Network information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Yamaha technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Supported devices and file formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Multi-zone output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Audio Return Channel (ARC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Reference diagram (rear panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
En
4
Accessories
Operating range of the remote control
Check that the following accessories are supplied with the product.
• Point the remote control at the remote control sensor on the unit and remain within the operating range
shown below.
 Remote control
 Batteries (AAA, R03, UM-4) (x2)
Within
6 m (20 ft)
30°
30°
Insert the batteries the right
way round.
 AM antenna
 FM antenna
*One of the above is supplied depending on the region
of purchase.
 YPAO microphone
 Wireless antenna
• The illustrations of the remote control used in this manual are of the Australia model, unless otherwise
specified.
• (China model only)
For information on how to control external devices with the remote control, refer to “Supplement for
Remote Control” on the supplied CD-ROM.
 Power cable
 CD-ROM (Owner’s Manual)
 Easy Setup Guide
 Safety Brochure
• Some features are not available in certain regions.
• Due to product improvements, specifications and appearance are subject to change without notice.
• This manual explains operations using the supplied remote control.
• This manual describes all the “iPod”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod”, “iPhone”
and “iPad”, unless otherwise specified.
*The supplied power cable varies depending on the region
of purchase.
•
indicates precautions for use of the unit and its feature limitations.
•
indicates supplementary explanations for better use.
Accessories
En
5
FEATURES
What you can do with the unit
Wide variety of supported content
• iPod/iPhone/iPad
. p.67
• USB
. p.70
• Media server (PC/NAS)
. p.73
• Internet radio
. p.77
• AirPlay
. p.80
Supports 2- to 7-channel (plus front presence) speaker
system and up to 2 subwoofer connections. Allows
you to enjoy favorite acoustic spaces in various styles.
• Automatically optimizing the speaker . p.38
settings to suit your room (YPAO)
• Reproducing stereo or multichannel . p.58
sounds with the sound fields like
actual movie theaters and concert halls
(CINEMA DSP)
• Enjoying compressed music with
. p.62
enhanced sound (Compressed Music
Enhancer)
Control
Network contents
Speakers
iPod/iPhone/iPad
Audio
• Bi-amp connections, channel
expansion (with external power-amp)
and multi-zone configurations to
enhance your system
. p.20
Audio
USB device
HDMI Control
3D and 4K Ultra HD signals supported
Audio
HDMI Control
Audio/Video
BD/DVD player
Audio/Video
TV
AV receiver (the unit)
Control
Audio/Video
(via HDMI/MHL)
Smartphone/Tablet
Sequential operation of a TV,
AV receiver, and BD/DVD
player (HDMI Control)
Change the input source
and favorite settings with
one touch (SCENE)
. p.55
TV remote control
. p.144
FEATURES ➤ What you can do with the unit
En
6
Full of useful functions!
Useful tips
❑ Connecting various devices (p.28)
❑ Creating 3-dimensional sound fields (p.58)
A number of HDMI jacks and various input/output jacks
on the unit allow you to connect video devices (such as
BD/DVD players), audio devices (such as CD players),
game consoles, camcorders, and other devices.
Connecting front presence speakers allows you to
create a natural 3-dimensional sound field in your own
room (CINEMA DSP 3D). Even when no front presence
speakers are connected, the Virtual Presence Speaker
(VPS) function produces 3D surround sound.
❑ Playing back TV audio in surround sound
with a single HDMI cable connection
(Audio Return Channel: ARC) (p.26)
I want to connect a playback device using HDMI for
video and non-HDMI for audio...
Use “Audio Select” in the “Option” menu to specify the
type of an audio input jack to be used for the
corresponding input source (p.96).
Video and audio are not synchronized...
Use “Lipsync” in the “Setup” menu to adjust the delay
between video and audio output (p.111).
I want to hear audio from the TV speakers...
When using an ARC-compatible TV, you only need one
HDMI cable to enable video output to the TV, audio
input from the TV, and the transmission of HDMI Control
signals.
Use “Audio Output” in the “Setup” menu to select the
output destination of signals input into the unit (p.115).
Your TV speakers may be selected as an output
destination.
I want to get more bass sounds…
HDMI Control
TV audio
Set “Extra Bass” in the “Option” menu to “On” to enjoy
enhanced bass sounds (p.95).
Video from
external device
I want to change the on-screen menu language...
❑ Various wireless connection methods
(p.46)
The unit supports the Wi-Fi feature that allows the unit to
connect to your wireless router (access point) without a
network cable connection. In addition, Wireless Direct
enables connecting a mobile device to the unit directly
without router.
Wi-Fi or
Wireless Direct
❑ Surround playback with 5 speakers placed
in front (p.60)
If you have surround speakers but there is no space to
place them in the rear of your room, you can place them in
the front and enjoy multi-channel surround sound with the
5 speakers placed in the front (Virtual CINEMA FRONT).
Use “Language” in the “Setup” menu to select a
language from English, Japanese, French, German,
Spanish, Russian, Italian and Chinese (p.37).
I want to update the firmware...
Use “FIRM UPDATE” in the “ADVANCED SETUP” menu
to update the unit’s firmware (p.128). If the unit is
connected to the Internet, a message will be displayed
on the TV when a firmware update is available (p.129).
❑ Low power consumption (p.123)
Many other settings are available that let you to
customize the unit. For details, see the following pages.
The ECO mode (power saving function) reduces the
unit’s power consumption.
• Input settings (p.97)
❑ Easy operation and wireless music
playback from iPhone or Android™ device
• Sound program and surround decoder settings
(p.102)
By using the application for smartphone/tablet “AV
CONTROLLER”, you can control the unit from an
iPhone, iPad, iPod touch or Android devices. Visit the
Yamaha website for details.
• SCENE settings (p.99)
• Various function settings (p.106)
• Information view (such as audio signal and video
signal) (p.124)
• System settings (p.126)
FEATURES ➤ What you can do with the unit
En
7
Part names and functions
Front panel
1
2
6
1 MAIN ZONE z key
Turns on/off (standby) the unit.
2 Standby indicator
Lights up when the unit is in standby mode under any of the
following conditions.
• HDMI Control is enabled (p.114)
• Standby Through is enabled (p.115)
• Network Standby is enabled (p.116)
• An iPod is being charged (p.67)
3
7
5 PURE DIRECT key
Enables/disables Pure Direct (p.62).
6 INPUT knob
Selects an input source.
7 Front panel door
4
5
8
Opening the front panel door
• To use controls or jacks behind the front panel door, gently
press the bottom of the door to open it. Keep the door closed
when not using controls or jacks behind the front panel door.
(Be careful not to trap your fingers.)
For protecting controls and jacks (p.9).
8 VOLUME knob
Adjusts the volume.
3 Front display
Displays information (p.10).
4 Remote control sensor
Receives remote control signals (p.5).
FEATURES ➤
Part names and functions
En
8
■ Inside of the front panel door
9
0
M
9 ON SCREEN key
Displays the on-screen menu on the TV.
0 Menu operations keys
Cursor keys Select a menu or a parameter.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen.
A OPTION key
Displays the option menu (p.93).
B DISPLAY key
AB C
N
DE
O
Adjusts the high-frequency range and low-frequency range
of output sounds (p.94).
Adjusts the left/right channel volume balance for Zone2
(p.88).
D STRAIGHT key
Enables/disables the straight decode mode (p.61).
GH
IJ
F SCENE keys
Switch between FM and AM (p.63).
K PRESET keys
Select the registered input source, sound program, and
various settings with one touch. Also, turns on the unit when
it is in standby mode (p.55).
G MULTI ZONE keys
ZONE CONTROL
L
J FM and AM keys
Select a sound program or a surround decoder (p.57).
ZONE 2
K
P
E PROGRAM keys
Displays status information on the TV (p.92).
C TONE/BALANCE key
F
Enables/disables the audio output to
Zone2 (p.87).
Changes the zone (main zone or Zone2)
that is controlled by the keys and knobs
on the front panel (p.87).
H INFO (WPS) key
Selects the information displayed on the front display (p.92).
Enters the wireless network connection setup (WPS push
button configuration) by holding down for 3 seconds (p.48).
I MEMORY key
Registers FM/AM radio stations as preset stations (p.64).
Select a preset FM/AM radio station (p.64).
L TUNING keys
Select the radio frequency (p.63).
M USB jack
For connecting a USB storage device (p.70) or an iPod
(p.67).
N YPAO MIC jack
For connecting the supplied YPAO microphone (p.38).
O PHONES jack
For connecting headphones.
P VIDEO AUX jacks
For connecting a device, such as a camcorder and a game
console (p.31, 32) or a smartphone (p.31).
FEATURES ➤
Part names and functions
En
9
Front display (indicators)
1 23
4
6
5
7
8
9
ECO
MUTE VOLUME
ZONE ZONE ZONE SLEEP
3
4
IN OUT 1 2 3 2
ENHANCER
PARTY
STEREO TUNED
3
0A
B
C
Lights up when HDMI signals are being input or output.
IN
Lights up when HDMI signals are being input.
OUT1/OUT2
Indicates the HDMI OUT jacks currently outputting an HDMI
signal.
2 ECO
Lights up when the unit is in the eco mode (p.123).
3 Signal strength indicator
Indicates the strength of the wireless network signal (p.46).
4 ZONE2
Lights up when Zone2 is enabled (p.87).
5 SLEEP
Lights up when the sleep timer is on.
6 Information display
Displays the current status (such as input name and sound
mode name). You can switch the information by pressing
INFO (p.92).
Blinks when audio is muted.
FPL L C R FPR
SL
SW
SR
SBL SB SBR
D
1 HDMI
7 MUTE
ADAPTIVE DRC VIRTUAL
DE
8 Volume indicator
Indicates the current volume.
9 VIRTUAL
Lights up when the Virtual Presence Speaker (VPS) (p.58) or
the virtual surround processing (p.60) is working.
0 ENHANCER
Lights up when Compressed Music Enhancer (p.62) is
working.
A STEREO
Lights up when the unit is receiving a stereo FM radio signal.
TUNED
Lights up when the unit is receiving an FM/AM radio station
signal.
F
F Speaker indicators
Indicate speaker terminals from which signals are output.
A Front speaker (L)
S Front speaker (R)
D Center speaker
F Surround speaker (L)
G Surround speaker (R)
H Surround back speaker (L)
J Surround back speaker (R)
K Surround back speaker
B Front presence speaker (L)
N Front presence speaker (R)
L Subwoofer
B CINEMA DSP
Lights up when CINEMA DSP (p.58) is working. “CINEMA
DSP n” lights up when CINEMA DSP 3D (p.58) is activated.
C PARTY
Lights up when the unit is in the party mode. (p.88)
D Cursor indicators
Indicate the remote control cursor keys currently operational.
E ADAPTIVE DRC
Lights up when Adaptive DRC (p.94) is working.
FEATURES ➤
Part names and functions
En
10
Rear panel
1 2
3
4
5
6
7
8
9
:
A B
C
D
* The area around the video/audio output jacks is
marked in white on the actual product to
prevent improper connections.
1 PHONO jacks
For connecting to a turntable (p.30).
2 DC OUT jack
For connecting to an optional accessory.
3 AV 1–4 jacks
For connecting to video/audio playback devices and
inputting video/audio signals (p.28).
4 HDMI OUT 1 jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.26). When using ARC, TV audio signal
can also be input through the HDMI OUT 1 jack.
HDMI OUT 2 (ZONE OUT) jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.28), or for connecting to an
HDMI-compatible device used in Zone2 (p.85).
5 AV OUT jacks
For outputting video/audio to a recording device (such as a
VCR) (p.35).
6 MONITOR OUT/ZONE OUT
component/composite video jacks
For connecting to a TV that supports component or
composite video and outputting video signals (p.27) or for
connecting to a Zone2 video monitor (p.84).
7 COMPONENT VIDEO (AV 1–3) jacks
For connecting to video playback devices that support
component video and inputting video signals (p.29).
B RS-232C terminal
This is a control expansion terminal for custom installation.
Consult your dealer for details.
C WIRELESS jack
For connecting the supplied wireless antenna (p.34).
D AC IN jack
For connecting the supplied power cable (p.36).
8 HDMI (AV 1–7) jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.28).
9 TRIGGER OUT 1–2 jacks
For connecting to devices that support the trigger function
(p.36).
0 REMOTE IN/OUT jacks
For connecting to an infrared signal receiver/emitter that
allows you to operate the unit and other devices from another
room (p.86).
A NETWORK jack
For connecting to a network with a network cable (p.34).
FEATURES ➤
Part names and functions
En
11
E F
E ANTENNA jacks
For connecting to FM and AM antennas (p.33).
F AUDIO 1–4 jacks
For connecting to audio playback devices and inputting
audio signals (p.30).
G
H
I
K
* The area around the video/audio output jacks is
marked in white on the actual product to
prevent improper connections.
I SPEAKERS terminals
For connecting to speakers (p.15).
J PRE OUT jacks
For connecting to a subwoofer with built-in amplifier (p.18) or
to an external power amplifier (p.24).
G MULTI CH INPUT jacks
For connecting to a device that supports multi-channel
output and inputting audio signals (p.35).
H ZONE OUT jacks
For connecting to the external amplifier used in Zone2 and
for outputting audio (p.84).
FEATURES ➤
Part names and functions
En
12
Remote control
1 Remote control signal transmitter
1
Transmits infrared signals.
2 z (receiver power) key
2
Turns on/off (standby) the unit.
3 Input selection keys
3
4
F
G
5
Select an input source for playback.
AV 1–7
AV 1–7 jacks
V-AUX
VIDEO AUX jacks (on the front panel)
AUDIO 1–4 AUDIO 1–4 jacks
PHONO
PHONO jacks
MULTI
MULTI CH INPUT jacks
USB
USB jack (on the front panel)
NET
NETWORK sources (press repeatedly to select
a desired network source)
TUNER
FM/AM radio
4 MAIN/ZONE2 switch
6
7
8
H
I
J
Select the registered input source, sound program, and
various settings with one touch. Also, turns on the unit when
it is in standby mode (p.55).
Select a sound program (p.57).
K
B
C
D
E
5 SCENE keys
6 PROGRAM keys
9
:
A
Changes the zone (main zone or Zone2) that is controlled by
the remote control (p.87).
7 External device operation keys
Displays menus for the HDMI Control-compatible playback
device (p.144).
8 ON SCREEN key
Displays the on-screen menu on the TV.
9 Menu operation keys
Cursor keys Select a menu or a parameter.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen.
0 MODE key
Switches the iPod operation modes (p.69).
A Radio keys
Operate the FM/AM radio when “TUNER” is selected as the
input source (p.63).
BAND
Switches between FM and AM radio.
PRESET
Select a preset station.
TUNING
Select the radio frequency.
External device operation keys
Let you perform playback operations when “USB” or “NET” is
selected as the input source, or control playback of the
HDMI Control-compatible playback device (p.144).
B Sound mode keys
Select a sound mode (p.57).
C INFO key
Selects the information displayed on the front display (p.92).
D SLEEP key
Switches the unit to standby mode automatically after a
specified period of time has elapsed (sleep timer). Press
repeatedly to set the time (120 min, 90 min, 60 min, 30 min, off).
E Numeric keys
Let you enter numerical values, such as radio frequencies.
MEMORY key
Registers FM/AM radio stations as presets (p.64).
F HDMI OUT key
Selects HDMI OUT jacks to be used for video/audio output
(p.54).
G PARTY key
Turns on/off the party mode (p.88).
H VOLUME keys
Adjust the volume.
I MUTE key
Mutes the audio output.
J OPTION key
Displays the option menu (p.93).
K DISPLAY key
Displays status information on the TV (p.92).
• (China model only)
For information on the keys other than those above, refer to
“Supplement for Remote Control” on the supplied CD-ROM.
FEATURES ➤
Part names and functions
En
13
PREPARATIONS
General setup procedure
1 Connecting speakers (p.15)
Basic speaker configuration (p.16)
Select the speaker layout and connect the speakers to the unit.
Advanced speaker configuration (p.20)
Apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone
configurations to enhance the system.
2 Connecting a TV (p.26)
Connect a TV to the unit.
3 Connecting playback devices (p.28)
Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.
4 Connecting the FM/AM antennas (p.33)
Connect the supplied FM/AM antennas to the unit.
5
Connecting a network cable or the
wireless antenna (p.34)
Connect the unit to a router (access point) with a network cable, or connect the supplied wireless antenna
for establishing a wireless network connection.
6 Connecting other devices (p.35)
Connect external devices such as recording devices.
7 Connecting the power cable (p.36)
After all the connections are complete, plug in the power cable.
8 Selecting an on-screen menu language (p.37)
Select the desired on-screen menu language (default: English).
9
Optimizing the speaker settings
automatically (YPAO) (p.38)
Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room
(YPAO).
10
Connecting to a network device wirelessly
(p.46)
Connect the unit to a wireless router (access point) or a mobile device by establishing a wireless connection.
This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!
PREPARATIONS
➤ General setup procedure
En
14
1 2 3 4 5 6 7 8 9 10
1 Connecting speakers
The unit has 7 built-in amplifiers. You can connect 2 to 9 speakers and up to 2 subwoofers to create the favorite acoustic space in your room.
You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system (p.20).
Caution
• Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6  MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
For details, see “Setting the speaker impedance” (p.18).
Ideal speaker layout
Functions of each speaker
Speaker type
Abbr.
Front (L)
1
Function
Front (R)
2
Center
3
Produces center channel sounds (such as movie dialogues and vocals).
Surround (L)
4
Surround (R)
5
Produce surround left/right channel sounds. Surround speakers also
produce surround back channel sounds when no surround back
speakers are connected.
Surround
back (L)
6
E
Produce front left/right channel sounds (stereo sounds).
1.8 m
(5.9 ft)
7
Front
presence (L)
E
Front
presence (R)
R
Subwoofer
9
1
9
Produce surround back left/right channel sounds.
Surround
back (R)
R
0.5 to 1 m
(1.6 to 3.3 ft)
0.5 to 1 m
(1.6 to 3.3 ft)
1.8 m
(5.9 ft)
2
3
9
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP
3D (p.58), the front presence speakers create a natural 3-dimensional
sound field in your room.
Produces LFE (low-frequency effect) channel sounds and reinforces
bass parts of other channels.
This channel is counted as “0.1”. You can connect 2 subwoofers to the
unit and place them on the left/right (or front/rear) sides of the room.
4
5
10°~30°
10°~30°
6
• We recommend using front presence speakers to have a full effect of the 3-dimensional sound fields.
However, the unit creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to
produce 3-dimensional sound fields even when no front presence speakers are connected (p.58).
7
0.3 m (1 ft) or more
• Use “Ideal speaker layout” (diagram on the right) as reference. You do not need to exactly adjust the
speaker layout to this diagram since the YPAO function of the unit will automatically optimize the speaker
settings (such as distances) to suit the speaker layout.
• When using only one surround back speaker, place it straight behind the listening position (middle of “SBL”
and “SBR” in the diagram).
PREPARATIONS ➤ Connecting speakers
En
15
1 2 3 4 5 6 7 8 9 10
Basic speaker configuration
■ Placing speakers in your room
Depending on the number of speakers, place the speakers and subwoofer in your room. This section describes the representative speaker layout examples.
❑ 7.1+2-channel system
(using both surround back and front presence speakers)
❑ 7.1-channel system
(using front presence speakers)
This speaker system brings out the full performance of the unit and allows you to enjoy
a highly-natural 3-dimensional sound field with any contents.
This speaker system uses the front presence speakers to produce a highly-natural
3-dimensional sound field, and is suited for enjoying 5.1-channel contents.
❑ 7.1-channel system (using surround back speakers)
• The surround back speakers and front presence speakers do not produce sounds simultaneously. The unit
automatically changes the speakers to be used, depending on the selected CINEMA DSP (p.58).
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a 3-dimensional sound field, and also allows you to
enjoy extended surround sounds using the surround back speakers.
PREPARATIONS ➤ Connecting speakers
En
16
1 2 3 4 5 6 7 8 9 10
❑ 5.1-channel system
❑ Front 5.1-channel system (using front presence speakers)
E
R
1
9
2
3
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a 3-dimensional sound field, and is suited for enjoying
5.1-channel contents.
This speaker system uses the front presence speakers to produce a natural
3-dimensional sound field, and creates the virtual surround speakers using the front
speakers to allow you to enjoy multi-channel surround sound (Virtual CINEMA DSP).
❑ Front 5.1-channel system (using surround speakers)
❑ 2.1-channel system
1
2
4
9
5
3
Even when surround speakers are placed in the front side, the unit creates the virtual
surround speakers in the rear side to allow you to enjoy multi-channel surround sound (Virtual
CINEMA FRONT) when “Layout (Surround)” (p.110) in the “Setup” menu is set to “Front”.
Even when no surround speakers are connected, the unit creates the virtual surround
speakers using the front speakers to allow you to enjoy multi-channel surround sound
(Virtual CINEMA DSP).
• You can enjoy surround sound even without the center speaker (front 4.1-channel system).
• Add the center speaker to configure a 3.1-channel system.
PREPARATIONS ➤ Connecting speakers
En
17
1 2 3 4 5 6 7 8 9 10
■ Setting the speaker impedance
■ Connecting speakers
Under its default settings, the unit is configured for 8-ohm speakers. When using a
6-ohm speaker for any channel, set the speaker impedance to “6  MIN”. In this case,
you can also use 4-ohm speakers as the front speakers.
Connect the speakers placed in your room to the unit.
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press
MAIN ZONE z.
MAIN ZONE z
Caution
• Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the
speakers.
• Ensure that the core wires of the speaker cable do not touch one another or come into contact with the
unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit,
“Check SP Wires” will appear on the front display when the unit is turned on.
Speakers to be connected
STRAIGHT
Room
3
Check that “SPEAKER IMP.” is displayed on the front display.
SPIMP.-
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
HD 3
4
5
SPEAKERIMP.
8MIN
Speaker system
(the number of channels)
Speaker type
Abbr.
7+2
7
5
2
Front (L)
1
●
●
●
●
Front (R)
2
●
●
●
●
Center
3
●
●
●
Surround (L)
4
●
●
*3
Surround (R)
5
●
●
*3
Surround
back (L)
6
●
*1
Surround
back (R)
7
●
*1
Front
presence (L)
E
●
*2
*4
Front
presence (R)
R
●
*2
*4
Power Amp
Assign
(p.108)
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Press STRAIGHT to select “6  MIN”.
Press MAIN ZONE z to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
Main zone
Basic (default)
If you have seven speakers, use two of them as surround back speakers (*1) or front
presence speakers (*2).
If you have five speakers, use two of them as surround speakers (*3) or front presence
speakers (*4).
• You can also connect up to 2 subwoofers (with built-in amplifier) to the unit.
• To use an external power amplifier (Hi-Fi amplifier, etc.) to enhance speaker output, see “Connecting an
external power amplifier” (p.24).
PREPARATIONS ➤ Connecting speakers
En
18
1 2 3 4 5 6 7 8 9 10
Cables necessary for connection (commercially available)
❑ Connecting speaker cables
Speaker cables (x the number of speakers)
Speaker cables have two wires. One is for connecting the negative (-) terminal of the
unit and the speaker, and the other is for the positive (+) terminal. If the wires are
colored to prevent confusion, connect the black wire to the negative and the other wire
to the positive terminal.
+
–
+
–
Audio pin cable (two for connecting two subwoofers)
a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable, and
twist the bare wires of the cable firmly together.
Connection diagram
b Loosen the speaker terminal.
Refer to the following diagram and connect the speakers to the unit.
c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the
terminal.
d Tighten the terminal.
The unit (rear)
+ (red)
+
b
FR
c
ON
T
-
a
d
– (black)
Using a banana plug
a Tighten the speaker terminal.
b Insert a banana plug into the end of the terminal.
E
R
1
9
3
a
Banana plug
2
9
+
FR
ON
T
b
❑ Connecting the subwoofer (with built-in amplifier)
4
5
6
7
Use an audio pin cable to connect the subwoofer.
Audio pin cable
PRE
OUT
(SING
LE)
1
2
SURR
UND
SUR.
BA
CK
SUBW
OOFE
R
CENT
ER
CENT
ER
FRO
NT
• When using only one surround back speaker, connect it to the SINGLE jack (L side).
PREPARATIONS ➤ Connecting speakers
En
19
1 2 3 4 5 6 7 8 9 10
Advanced speaker configuration
In addition to the basic speaker configuration (p.16), the unit also allows you to apply the following speaker configurations to enhance your system.
Using the four internal
amplifiers for front speakers to
have more high-quality sounds
Bi-amp connection
Combining with an external
power amplifier (Hi-Fi
amplifier, etc.) to build an
extended system
Using the excess internal
amplifiers for stereo speakers
in another room
Power-amp channel expansion
(Example)
Multi-zone configuration
(Example)
(Example)
External power
amplifier
Bi-amp
connection
Zone2
Main zone
PREPARATIONS ➤ Connecting speakers
En
20
1 2 3 4 5 6 7 8 9 10
■ Available speaker configurations
❑ 5ch BI-AMP
Main zone
Output
channel
(max)
Bi-amp
5

7

7
Bi-amp
External
power
amplifier
(required)
Multi-zone
Surround
back
+1 (Zone2)
Power Amp Assign
(p.108)
Page
5ch BI-AMP
21
5ch BI-AMP +SB
22
7ch +1ZONE
22
1
2
3
9
4
9
5
• When applying one of these configurations, you need to configure the “Power Amp Assign” setting (p.108)
in the “Setup” menu.
Speaker
Connect to
12
FRONT and EXTRA SP (bi-amp connection)
3
CENTER
45
SURROUND
67
(not used)
ER
(not used)
9
SUBWOOFER 1–2
PREPARATIONS ➤ Connecting speakers
En
21
1 2 3 4 5 6 7 8 9 10
❑ 5ch BI-AMP +SB
❑ 7ch +1ZONE
Bi-amp
1
9
1
2
3
9
9
4
1
5
6
7
2
9
3
4
5
6
2
7
Zone2
Main zone
via external amp
Speaker
Connect to
Speaker
Connect to
12
FRONT and EXTRA SP (bi-amp connection)
12
FRONT
3
CENTER
3
CENTER
45
SURROUND
45
SURROUND
67
SUR.BACK (PRE OUT) via external power amplifier
67
SURROUND BACK
ER
(not used)
ER
(not used)
9
SUBWOOFER 1–2
9
SUBWOOFER 1–2
Zone2 speakers
EXTRA SP
• When Zone2 output is enabled (p.87), the surround back speakers in the main zone do not output sound.
PREPARATIONS ➤ Connecting speakers
En
22
1 2 3 4 5 6 7 8 9 10
■ Connecting front speakers that support bi-amp connections
■ Connecting Zone2 speakers
When using front speakers that support bi-amp connections, connect them to the
FRONT terminals and EXTRA SP terminals.
When using Zone2 speakers, connect them to the EXTRA SP terminals.
To enable the bi-amp function, configure the “Power Amp Assign” setting (p.108) in the
“Setup” menu after connecting the power cable to an AC wall outlet.
To utilize the EXTRA SP terminals for Zone2 speakers, configure the “Power Amp
Assign” setting (p.108) in the “Setup” menu after connecting the power cable to an AC
wall outlet.
The unit (rear)
The unit (rear)
1
1
9
2
4
3
FL
9
FR
9
4
3
9
2
5
6
7
Zone2
5
Main zone
• You can also connect Zone2 speakers using an external amplifier (p.84).
• The FRONT terminals and EXTRA SP terminals output the same signals.
Caution
• Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
PREPARATIONS ➤ Connecting speakers
En
23
1 2 3 4 5 6 7 8 9 10
■ Connecting an external power amplifier
When connecting an external power amplifier to enhance speaker output, connect the
input jacks of the power amplifier to the PRE OUT jacks of the unit. The same channel
signals are output from the PRE OUT jacks as from their corresponding SPEAKERS
terminals.
(Example)
Connecting front speakers via an external power amplifier
PRE OUT (FRONT) jacks
Main input jack
Caution
MAIN IN
PR
• To prevent the generation of loud noises or abnormal sounds, make sure the followings before making
connections.
– Remove the power cable of the unit and turn off the external power amplifier before connecting them.
– When using the PRE OUT jacks, do not connect speakers to the corresponding SPEAKERS
terminals.
– When using a pre-main amplifier that does not have the volume control bypass, turn up the volume of
the pre-main amplifier enough and fix it. In this case, do not connect other devices (except the unit) to
the pre-main amplifier.
FRONT
L
L
R
R
Amplifier with
volume control
bypass
(such as A-S3000)
SUR
The unit (rear)
The unit (rear)
1 23
4
1 FRONT jacks
Output front channel sounds.
2 SURROUND jacks
Output surround channel sounds.
3 SUR. BACK jacks
About external power amplifiers
We recommend using power amplifiers that meet the following conditions.
• With unbalanced inputs
• With volume control bypass (or without volume control circuit)
• Output power: 100 W or more (6 to 8 )
Output surround back channel sounds. When using only one surround back speaker, connect
the external amplifier to the SINGLE jack (L side).
4 CENTER jack
Outputs center channel sounds.
PREPARATIONS ➤ Connecting speakers
En
24
Input/output jacks and cables
■ Video/audio jacks
■ Video jacks
■ Audio jacks
❑ HDMI jacks
❑ COMPONENT VIDEO jacks
❑ OPTICAL jacks
Transmit digital video and digital sound through a single
jack. Use an HDMI cable.
Transmit video signals separated into three
components: luminance (Y), chrominance blue (PB),
and chrominance red (PR). Use a component video
cable with three plugs.
Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.
AV 1
HDMI cable
Digital optical cable
EN
PON
COM
Component video cable
AV 1
A
• Use a 19-pin HDMI cable with the HDMI logo. We recommend using
a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.
❑ COAXIAL jacks
❑ VIDEO jacks
• The unit’s HDMI jacks support the HDMI Control, Audio Return
Channel (ARC), and 3D and 4K Ultra HD video transmission
features.
Transmit analog video signals. Use a video pin cable.
AV 1
Transmit digital audio signals. Use a digital coaxial
cable.
Digital coaxial cable
Video pin cable
• Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos.
❑ HDMI/MHL jack
Transmits digital video and digital sound. Use an MHL
or HDMI cable.
❑ AUDIO jacks
Transmit analog stereo audio signals. Use a stereo pin
cable (RCA cable).
MHL or HDMI cable
Stereo pin cable
• The VIDEO AUX jack on the front panel of the unit supports both
MHL and HDMI connections. Use a cable that matches the jack on
your MHL-compatible mobile device. For details on an MHL
connection, see “MHL connection” (p.31). When connecting an
HDMI-compatible playback device to the VIDEO AUX jack, use an
HDMI cable.
PREPARATIONS ➤
Input/output jacks and cables
En
25
1 2 3 4 5 6 7 8 9 10
2 Connecting a TV
Connect a TV to the unit so that video input to the unit can be output to the TV.
You can also enjoy playback of TV audio on the unit.
To maximize the performance of the unit, we recommend connecting a TV with an HDMI
cable.
■ HDMI connection
Connect the TV to the unit with an HDMI cable and an audio cable (digital optical or
stereo pin cable).
• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
• When using ARC, connect a TV with an HDMI cable that supports ARC.
■ Component/composite video connection
When connecting any video device with a component video cable, connect the TV to
the MONITOR OUT (COMPONENT VIDEO) jacks.
When connecting any video device with a video pin cable, connect the TV to the
MONITOR OUT (VIDEO) jack.
• You can connect another TV or a projector by using the HDMI OUT 2 jack (p.28).
The unit (rear)
About Audio Return Channel (ARC)
HDMI OUT jack
HDMI OUT
2
1
(ZONE OUT)
HDMI input
ARC
HDMI
• If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
• Operations with TV screen are available only when your TV is connected to the unit via HDMI.
HDMI
HDMI
• If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable
connection between the TV and the unit.
AUDIO
AUDIO 1
(2 TV)
L
L
L
R
R
R
TV
5 OPTICAL
OPTICAL
O
AUDIO 1
(OPTICAL or AUDIO) jacks
O
Audio output
(digital optical or analog stereo)
• You do not make an audio cable connection between the TV and the unit in the following cases:
– If your TV supports Audio Return Channel (ARC)
– If you will receive TV broadcasts only from the set-top box
• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
details on the settings, see “Information on HDMI” (p.144).
PREPARATIONS ➤ Connecting a TV
En
26
1 2 3 4 5 6 7 8 9 10
❑ COMPONENT VIDEO connection (with a component video cable)
MONITOR OUT (VIDEO) jack
MONITOR OUT
(COMPONENT VIDEO) jacks
The unit
(rear)
MONITOR OUT/
ZONE OUT
Y
PB
PR
❑ VIDEO (composite video) connection (with a video pin cable)
The unit (rear)
MONITOR OUT/
ZONE OUT
Video input (composite video)
PR
VIDEO
PB
Video input
(component video)
Y
V
V
COMPONENT VIDEO
PR
Y
PB
PR
AUDIO
AUDIO 1
(2 TV)
L
PB
L
L
R
R
Y
R
AUDIO
AUDIO 1
(2 TV)
TV
L
L
L
R
R
5 OPTICAL
OPTICAL
R
O
O
TV
5 OPTICAL
OPTICAL
O
AUDIO 1
(OPTICAL or AUDIO) jacks
O
AUDIO 1
(OPTICAL or AUDIO)
jacks
Audio output
(digital optical or analog stereo)
Audio output
(digital optical or analog stereo)
PREPARATIONS ➤ Connecting a TV
En
27
1 2 3 4 5 6 7 8 9 10
■ Connecting another TV or a projector
HDMI
The unit has two HDMI output jacks. If you connect another TV or a projector to the unit
with an HDMI cable, you can switch the TV (or projector) to be used for watching
videos with the remote control (p.54).
The unit
(rear)
(ZONE OUT)
The unit is equipped with a variety of input jacks including HDMI input jacks to allow
you to connect different types of playback devices. For information on how to connect
an iPod or a USB storage device, see the following pages.
• Connecting an iPod (p.67)
HDMI OUT 2 jack
HDMI OUT
2
3 Connecting playback devices
• Connecting a USB storage device (p.70)
1
ARC
TV
Connecting video devices (such as BD/DVD players)
Connect video devices such as BD/DVD players, set-top boxes (STBs) and game
consoles to the unit. Depending on the video/audio output jacks available on your video
device, choose one of the following connections. We recommend using an HDMI
connection if the video device has an HDMI output jack.
HDMI
HDMI input
HDMI
• Videos input to the unit via HDMI cannot be output to a TV connected to the unit with a cable other than
HDMI. For details, refer to “Video signal flow” (p.143).
TV (already connected)
Projector
• HDMI Control is not available on the HDMI OUT 2 jack.
• If you set “HDMI OUT2 Assign” (p.119) in the “Setup” menu to “Zone2”, you can connect a video monitor for
Zone2 to the HDMI OUT 2 jack and enjoy videos and audio using the video monitor (p.85).
• The following explanation is based on the assumption that you have not changed the “Input Assignment”
setting (p.120) in the “Setup” menu. As necessary, you can assign the COMPONENT VIDEO (A , B , C ),
COAXIAL (a, b, f) and OPTICAL (c, d, e) jacks to another input source.
• If you make more than one audio connection for one input source, an audio signal played back on the unit
will be determined according to the “Audio Select” setting (p.96) in the “Option” menu.
■ HDMI connection
Connect a video device to the unit with an HDMI cable.
The unit (rear)
HDMI (AV 1–7) jacks
HDMI output
HDMI
HDMI
HDMI
Video device
If you select the input source by pressing AV 1–7 on the remote control, the video/audio
played back on the video device will be output from the unit.
PREPARATIONS ➤ Connecting playback devices
En
28
1 2 3 4 5 6 7 8 9 10
■ Component video connection
■ Composite video connection
Connect a video device to the unit with a component video cable and an audio cable
(digital coaxial, digital optical or stereo pin cable). Choose a set of input jacks (on the
unit) depending on the audio output jacks available on your video device.
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit)
depending on the audio output jacks available on your video device.
Output jacks on video device
Output jacks on video device
Input jacks on the unit
Video
Audio
Component video
Digital coaxial
AV 1–2 (COMPONENT VIDEO + COAXIAL)
Digital optical
AV 3 (COMPONENT VIDEO + OPTICAL)
Analog stereo
AV 1–3 (COMPONENT VIDEO + AUDIO)
AV 1–3
(COMPONENT VIDEO) jacks
Y
The unit (rear)
PB
Input jacks on the unit
Video
PR
Audio
Composite video
Digital coaxial
AV 1–2 (VIDEO + COAXIAL)
Digital optical
AV 3–4 (VIDEO + OPTICAL)
Analog stereo
AV 1–4 (VIDEO + AUDIO)
The unit (rear)
AV 1–4 (VIDEO) jacks
PR
Video output
(composite video)
PB
Y
V
VIDEO
Video output
(component video)
PR
Y
PB
V
PR
PB
C
C
Y
COAXIAL
O
C
C
L
COAXIAL
O
Video device
Video device
O
L
L
R
R
OPTICAL
O
R
L
L
L
R
R
OPTICAL
R
Any of AV 1–2 (COAXIAL),
AV 3 (OPTICAL),
AV 1–3 (AUDIO) jacks
Audio output
(any of digital coaxial, digital optical,
analog stereo)
Any of AV 1–2 (COAXIAL),
AV 3–4 (OPTICAL),
AV 1–4 (AUDIO) jacks
Audio output
(any of digital coaxial, digital optical,
analog stereo)
If you select the input source by pressing AV 1–4 on the remote control, the video/audio
played back on the video device will be output from the unit.
If you select the input source by pressing AV 1–3 on the remote control, the video/audio
played back on the video device will be output from the unit.
PREPARATIONS ➤ Connecting playback devices
En
29
1 2 3 4 5 6 7 8 9 10
Connecting audio devices (such as CD players)
PHONO jacks
PHONO
Connect audio devices such as CD players, MD players, and a turntable to the unit.
Depending on the audio output jacks available on your audio device, choose one of the
following connections.
• The following explanation is based on the assumption that you have not changed the “Input Assignment”
setting (p.120) in the “Setup” menu. As necessary, you can assign the COAXIAL (a, b, f) and OPTICAL
(c, d, e) jacks to another input source.
Audio output
(PHONO)
Ground lead
GND
The unit
(rear)
GND
PHONO
L
L
L
L
R
R
R
R
Turntable
• If you make more than one audio connection for one input source, an audio signal played back on the unit
will be determined according to the “Audio Select” setting (p.96) in the “Option” menu.
Audio output jacks on audio device
Audio output jacks on the unit
Digital coaxial
AV 1–2 (COAXIAL)
AUDIO 2 (COAXIAL)
Digital optical
AV 3–4 (OPTICAL)
AUDIO 1 (OPTICAL)
C
COAXIAL
O
Analog stereo
Turntable (PHONO)
C
Audio device
O
AV 1–4 (AUDIO)
AUDIO 1–4 (AUDIO)
L
L
L
R
R
PHONO
OPTICAL
R
Any of AV 1–4, AUDIO 1–4
(COAXIAL, OPTICAL, AUDIO) jacks
Audio output
(any of digital coaxial, digital optical,
analog stereo)
If you select the input source by pressing AV 1–4, AUDIO 1–4 or PHONO on the remote
control, the audio played back on the audio device will be output from the unit.
When connecting a turntable
• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a
low-output MC cartridge, use a boosting transformer.
• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
PREPARATIONS ➤ Connecting playback devices
En
30
1 2 3 4 5 6 7 8 9 10
Connecting to the jacks on the front panel
Use the VIDEO AUX jack to temporarily connect a playback device to the unit.
Use the USB jack to connect an iPod or a USB storage device. For details, see
“Connecting an iPod” (p.67) or “Connecting a USB storage device” (p.70).
❑ MHL connection
Connect an MHL-compatible mobile device (such as smartphones) to the unit with an
MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the
mobile device. The VIDEO AUX (HDMI/MHL IN) jack of the unit enables you to input
videos and audio directly from the mobile device to the unit.
Before making a connection, stop playback on the device and turn down the volume on the unit.
❑ HDMI connection
Connect an HDMI-compatible device (such as game consoles and camcorders) to the
unit with an HDMI cable.
MHL
The unit (front)
MHL output
HDMI
The unit (front)
MHL
Mobile device
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the mobile device will be output from the unit.
Game console
• To watch videos input to the VIDEO AUX (HDMI/MHL IN) jack, you need to connect your TV to the HDMI
OUT jack of the unit (p.26).
• You need to prepare an MHL cable that matches the jack on your mobile device.
• If you cannot hear sounds played on the mobile device, check the volume of the mobile device.
Camcorder
If you select “V-AUX” as the input source by pressing V-AUX on the remote control, the
video/audio played back on the device will be output from the unit.
• You can operate the mobile device using the menu operation keys, external device operation keys and
numeric keys on the remote control. However, some features may not be compatible, depending on the
mobile device or its application. In this case, operate the mobile device itself.
• If “Standby Through” (p.115) in the “Setup” menu is set to “On”, you can output mobile device videos/audio
to the TV or operate the mobile device using the remote control of the unit even when the unit is in standby
mode.
• To watch videos input to the VIDEO AUX (HDMI/MHL IN) jack, you need to connect your TV to the HDMI
OUT jack of the unit (p.26).
• You need to prepare an HDMI cable that matches the output jacks on your device.
• The unit supplies power to the mobile device in the following conditions.
– The unit is turned on.
– The unit is in standby mode while “Standby Through” (p.115) in the “Setup” menu is set to “On”.
• When “USB” is selected as the input source, video signals input to the VIDEO AUX jacks are output from
the HDMI OUT and MONITOR OUT (VIDEO) jacks by default. You can change the video out setting in
“Video Out” (p.96) in the “Option” menu.
PREPARATIONS ➤ Connecting playback devices
En
31
1 2 3 4 5 6 7 8 9 10
❑ Composite video/analog stereo connection
Connect a playback device (such as game consoles and camcorders) to the unit with a
video pin cable and a stereo pin cable.
V
L
R
The unit (front)
Game console
Camcorder
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the device will be output from the unit.
• If you connect video devices to both the VIDEO AUX (HDMI/MHL IN) jack and VIDEO AUX
(VIDEO/AUDIO) jacks, the unit outputs video/audio input through the VIDEO AUX (HDMI/MHL IN) jack.
PREPARATIONS ➤ Connecting playback devices
En
32
1 2 3 4 5 6 7 8 9 10
4 Connecting the FM/AM antennas
Connect the supplied FM/AM antennas to the unit.
Assembling the AM antenna
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
• The location of the antenna jacks varies depending on the region of purchase.
FM antenna
AM antenna
Connecting the AM antenna
Hold down
The unit (rear)
Insert
Release
• Unwind only the length of cable needed from the AM antenna unit.
• The wires of the AM antenna have no polarity.
PREPARATIONS ➤ Connecting the FM/AM antennas
En
33
1 2 3 4 5 6 7 8 9 10
5 Connecting a network cable or the wireless antenna
Connect the unit to a router (access point) with a network cable, or connect the
supplied wireless antenna for establishing a wireless network connection.
Connecting the wireless antenna
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
Connect the supplied wireless antenna to the unit for establishing a wireless network
connection.
For information on how to connect the unit to a network device wirelessly, see
“Connecting to a network device wirelessly” (p.46).
Connecting the network cable
Connect the unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
Internet
Network Attached Storage
(NAS)
WAN
b
ESS
WIREL
LAN
a
Modem
PC
a Rotate the antenna clockwise.
Network cable
Router
b Stand the antenna up straight.
The unit (rear)
Mobile device
(such as iPod touch
and iPhone)
• Do not connect the antenna other than the supplied one.
• Do not apply excessive force on the antenna. Doing so may damage it.
• When packing the unit, remove the antenna to prevent damage.
• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit,
as the network parameters (such as the IP address) will be assigned automatically to it. You only need to
configure the network settings if your router does not support DHCP or if you want to configure the network
parameters manually (p.116).
• You can check whether the network parameters (such as IP address) are properly assigned to the unit in
“Network” (p.124) in the “Information” menu.
• Some security software installed on your PC or the firewall settings of network devices (such as a router)
may block the access of the unit to the network devices or the Internet. In these cases, configure the
security software or firewall settings appropriately.
• Each server must be connected to the same subnet as the unit.
• To use the service via the Internet, broadband connection is strongly recommended.
PREPARATIONS ➤ Connecting a network cable or the wireless antenna
En
34
1 2 3 4 5 6 7 8 9 10
6 Connecting other devices
Connecting recording devices
Connecting a device with analog multi-channel output
You can connect video/audio recording devices to the AV OUT jacks. These jacks
output video/audio signals selected as the input.
You can connect an analog multi-channel output device such as a DVD player and an
SACD player to the MULTI CH INPUT jacks.
The unit (rear)
• The AV OUT jacks cannot output video/audio signals input through the HDMI or COMPONENT VIDEO
jacks.
• Be sure to use the AV OUT jacks only for connecting recording devices.
AV OUT jacks
The unit (rear)
AV OUT
Video/audio input
VIDEO
V
MULTI CH INPUT
Channel output
(Center)
CENTER
V
(Subwoofer)
AUDIO
L
L
R
R
L
R
Video/audio
recording device
FRONT
MULTI CH
INPUT jacks
SURROUND
SUR. BACK
SUBWOOFER
L
(Surround
back)
R
OPTICAL
O
L
(Surround)
Device with analog
multi-channel output
O
R
L
(Front)
R
If you select “MULTI CH” as the input source by pressing MULTI on the remote control,
the audio played back on the device will be output from the unit.
• You can select a video source to be displayed when “MULTI CH” is selected as the input source using
“Video Out” (p.96) in the “Option” menu. When connecting a video device (such as a DVD player) to the
MULTI CH INPUT jacks, use the input jack specified in “Video Out” for the video connection.
• Since the unit does not redirect signals input to the MULTI CH INPUT jacks to accommodate for missing
speakers, make appropriate settings on the external device (such as a DVD player) that suit to the speaker
configuration.
• When “MULTI CH” is selected as the input source, sound mode selection and tone control adjustment are
not available.
PREPARATIONS ➤ Connecting other devices
En
35
1 2 3 4 5 6 7 8 9 10
Connecting a device compatible with the trigger function
The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to one of the TRIGGER OUT jacks.
7 Connecting the power cable
After all the connections are complete, connect the supplied power cable to the unit
and then to an AC wall outlet.
The unit (rear)
TRIGGER OUT
1–2 jacks
The unit (rear)
TRIGGER
OUT
To an AC wall outlet
1
2
12V
0.1AMAX. TOTAL
System connection
input
Yamaha subwoofer that
supports a system connection
• You can configure the trigger function settings in “Trigger Output1” and “Trigger Output2” (p.121) in the
“Setup” menu.
PREPARATIONS ➤ Connecting the power cable
En
36
1 2 3 4 5 6 7 8 9 10
z
8 Selecting an on-screen menu language
Select the desired on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese.
ON SCREEN
1
2
Press z (receiver power) to turn on the unit.
3
4
Press ON SCREEN.
5
Use the cursor keys (e/r) to select “Language” and
the cursor keys (q/w) to select the desired
language.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
6
7
To confirm the setting, press ENTER.
To exit from the menu, press ON SCREEN.
• The information on the front display is provided in English only.
Use the cursor keys to select “Setup” and press
ENTER.
Cursor keys
ENTER
PREPARATIONS ➤ Selecting an on-screen menu language
En
37
1 2 3 4 5 6 7 8 9 10
z
9 Optimizing the speaker settings automatically (YPAO)
The Yamaha Parametric room Acoustic Optimizer (YPAO) function
detects speaker connections, measures the distances from them to
your listening position(s), and then automatically optimizes the
speaker settings, such as volume balance and acoustic
parameters, to suit your room.
4
According to your speaker configuration, configure
the “Power Amp Assign” setting (p.108) in the
“Setup” menu.
For the basic speaker configuration (p.16): set to “Basic”
(default).
For any of the advanced speaker configurations (p.20): set
to the appropriate setting.
• The YPAO function of the unit adopts the YPAO-R.S.C. (Reflected Sound Control)
technology that enables to create natural sound fields like a room specifically
designed for acoustic perfection.
5
• Note the following regarding YPAO measurement.
– Test tones are output at high volume and may surprise or frighten small children.
Place the YPAO microphone at your listening
position and connect it to the YPAO MIC jack on the
front panel.
– Test tone volume cannot be adjusted.
– Keep the room as quiet as possible.
– Stay in a corner of the room behind the listening position so that you do not
become an obstacle between speakers and the YPAO microphone.
• Place the YPAO microphone at your listening position (same height as your
ears). We recommend the use of a tripod as a microphone stand. You can
use the tripod screws to stabilize the microphone.
– Do not connect headphones.
1
2
Press z (receiver power) to turn on the unit.
3
Turn on the subwoofer and set the volume to half. If
the crossover frequency is adjustable, set it to
maximum.
YPAO MIC
jack
The unit (front)
YPAO MIC
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
1
9
VOLUME
CROSSOVER/
HIGH CUT
MAX
MIN
3
9
4
MIN
2
MAX
YPAO
5
microphone
Ear height
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
38
1 2 3 4 5 6 7 8 9 10
The following screen appears on the TV.
• If you perform the multi measure, the speaker settings will be optimized for you to
enjoy surround sound in a wider space.
• If you perform the multi measure, first place the YPAO microphone at the listening
position you will be seated most frequently.
Single measure
• To cancel the operation, disconnect the YPAO microphone before starting
the measurement.
6
Cursor keys
ENTER
a
If desired, change the measuring method
(multi/single).
Multi measure
(5 listening positions)
d
e
bac
a Use the cursor keys to select “Multi Position” and press ENTER.
b Use the cursor keys to select a setting and then press ENTER.
Multi measure
Multi measure
(1 listening position + front/back/left/right) (2 listening positions + front/back)
b
c a e
d
c
a b
d
Settings
Yes
Select this option if you will have several listening
positions or if you want others to enjoy surround sound.
You can take measurements at up to 8 different
positions in the room. The speaker settings will be
optimized to suit the area defined by those positions
(multi measure).
No (default)
Select this option if your listening position will always be
fixed. Take the measurements at only one position. The
speaker settings will be optimized to suit that position
(single measure).
This completes the preparations. See the following page to start the
measurement.
When “Multi Position” is set to “Yes”:
“Measuring at multiple listening positions (multi measure)” (p.41)
When “Multi Position” is set to “No”:
“Measuring at one listening position (single measure)” (p.40)
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
39
1 2 3 4 5 6 7 8 9 10
Measuring at one listening position
(single measure)
3
To save the measurement results, use the cursor
keys (e/r) to select “SAVE” and press ENTER.
When “Multi Position” is set to “No”, follow the procedure below for
measurement. It takes about 3 minutes to perform the
measurement.
1
To start the measurement, use the cursor keys to
select “Measure” and press ENTER.
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
The adjusted speaker settings are applied.
• To cancel the measurement temporarily, press RETURN.
The following screen appears on the TV when the
measurement finishes.
Cursor keys
ENTER
RETURN
• To finish the measurement without saving the result, select “CANCEL”.
4
Use the cursor keys (e/r) to select “YES” or “NO”
to enable/disable YPAO Volume and press ENTER.
• If any error message (such as E-1) or warning message (such as W-1)
appears, see “Error messages” (p.44) or “Warning messages” (p.45).
• To check the measurement results, select “Result”. For details, see
“Checking the measurement results” (p.43).
2
Use the cursor keys to select “Save/Cancel” and
press ENTER.
PREPARATIONS ➤
• If YPAO Volume is enabled, the high- and low-frequency levels are
automatically adjusted according to the volume so that you can enjoy
natural sounds even at low volume.
• You can also enable/disable YPAO Volume in “YPAO Volume” (p.94) in the
“Option” menu.
Optimizing the speaker settings automatically (YPAO)
En
40
1 2 3 4 5 6 7 8 9 10
5
Disconnect the YPAO microphone from the unit.
Measuring at multiple listening positions
(multi measure)
This completes optimization of the speaker settings.
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
When “Multi Position” is set to “Yes”, follow the procedure below for
measurement. It takes about 10 minutes to measure 8 listening
positions.
• If any error message (such as E-1) or warning message (such as W-1) appears,
see “Error messages” (p.44) or “Warning messages” (p.45).
1
To start the measurement, use the cursor keys to
select “Measure” and press ENTER.
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
Cursor keys
ENTER
RETURN
• To cancel the measurement temporarily, press RETURN.
The following screen appears on the TV when the
measurement at the first position finishes.
2
Move the YPAO microphone to the next listening
position and press ENTER.
Repeat step 2 until measurements at all listening positions
(up to 8) have been taken.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
41
1 2 3 4 5 6 7 8 9 10
3
When the measurements at the positions you want
to measure are completed, use the cursor keys to
select “CANCEL” and press ENTER.
6
Use the cursor keys (e/r) to select “YES” or “NO”
to enable/disable YPAO Volume and press ENTER.
When you have taken measurements at 8 listening
positions, the following screen appears automatically.
• If YPAO Volume is enabled, the high- and low-frequency levels are
automatically adjusted according to the volume so that you can enjoy
natural sounds even at low volume.
Cursor keys
ENTER
• You can also enable/disable YPAO Volume in “YPAO Volume” (p.94) in the
“Option” menu.
• To check the measurement results, select “Result”. For details, see
“Checking the measurement results” (p.43).
4
Use the cursor keys to select “Save/Cancel” and
press ENTER.
5
To save the measurement result, use the cursor
keys to select “SAVE” and press ENTER.
7
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
The adjusted speaker settings are applied.
• To finish the measurement without saving the result, select “CANCEL”.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
42
1 2 3 4 5 6 7 8 9 10
Checking the measurement results
Reloading the previous YPAO adjustments
You can check the YPAO measurement results.
When the speaker settings you have configured manually are not
suitable, follow the procedure below to discard the manual settings
and reload the previous YPAO adjustments.
1
After the measurement, use the cursor keys to
select “Result” and press ENTER.
• You can also select “Result” from “Auto Setup” (p.106) in the “Setup” menu,
which displays the previous measurement results.
The following screen appears.
1
In the “Setup” menu, select “Speaker”, “Auto
Setup”, and then “Result” (p.105).
2
Use the cursor keys to select “Setup Reload” and
press ENTER.
3
To exit from the menu, press ON SCREEN.
ON SCREEN
1
2
Cursor keys
ENTER
RETURN
3
1 Measurement result items
2 Measurement result details
3 The number of measured positions (when multi
measure is performed)
2
3
Use the cursor keys to select an item.
Wiring
Polarity of each speaker
Reverse: The speaker cable may be connected with the
reverse polarity (+/-).
Size
Size of each speaker (cross-over frequency of the
subwoofer)
Large: The speaker can reproduce low-frequency
signals effectively.
Small: The speaker cannot reproduce low-frequency
signals effectively.
Distance
Distance from the listening position to each speaker
Level
Output level adjustment for each speaker
To finish checking the results and return to the
previous screen, press RETURN.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
43
1 2 3 4 5 6 7 8 9 10
Error messages
If any error message is displayed during the measurement, resolve the problem and perform YPAO again.
Error message
Cause
E-1:No Front SP
Front speakers are not detected.
E-2:No Sur. SP
One of the surround speakers cannot be detected.
E-3:No F.PRNS SP
One of the front presence speakers cannot be detected.
E-4:SBR → SBL
A surround back speaker is connected to the R side only.
When using only one surround back speaker, you need to connect it to the SINGLE jack (L side). Follow the
on-screen instructions to exit YPAO, turn off the unit, and then reconnect the speaker.
E-5:Noisy
The noise is too loud.
Keep the room quiet and follow the on-screen instructions to start the measurement again. If you select
“PROCEED”, YPAO takes the measurement again and ignores any noise detected.
E-6:Check Sur.
Surround back speakers are connected, but no surround
speakers are connected.
Surround speakers need to be connected in order to use surround back speakers. Follow the on-screen
instructions to exit YPAO, turn off the unit, and then reconnect the speakers.
E-7:No MIC
The YPAO microphone has been removed.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the
measurement again.
E-8:No Signal
The YPAO microphone cannot detect test tones.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the
measurement again. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service
center.
E-9:User Cancel
The measurement has been canceled.
Follow the on-screen instructions to start the measurement again. To cancel the measurement, select “EXIT”.
An internal error has occurred.
Follow the on-screen instructions to exit YPAO, turn off and on the unit. If this error occurs repeatedly, contact
the nearest authorized Yamaha dealer or service center.
E-10:Internal Err.
Remedy
Follow the on-screen instructions to exit YPAO, turn off the unit, and then check the speaker connections.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
44
1 2 3 4 5 6 7 8 9 10
Warning messages
If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.
Warning message
Cause
Remedy
W-1:Out of Phase
A speaker cable may be connected with the reverse polarity
(+/-).
Select “Wiring” in “Result” (p.43) and check the cable connections (+/-) of the speaker identified by
“Reverse”.
If the speaker is connected incorrectly:
Turn off the unit and then reconnect the speaker cable.
If the speaker is connected correctly:
Depending on the type of speakers or room environment, this message may appear even if the speakers are
connected correctly. In this case, you can ignore the message.
W-2:Over Distance
A speaker is placed more than 24 m (80 ft) from the listening
position.
Select “Distance” in “Result” (p.43) and move the speaker identified by “>24.00m (>80.0ft)” within 24 m
(80 ft) of the listening position.
W-3:Level Error
There are significant volume differences between the
speakers.
Select “Level” in “Result” (p.43) and check the speaker identified by “Over ±10.0dB”, then check the usage
environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. We recommend
using the same speakers or speakers with specifications that are as similar as possible.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
45
1 2 3 4 5 6 7 8 9 10
10 Connecting to a network device wirelessly
Connect the unit to a wireless router (access point) or a mobile device by establishing a
wireless connection.
■ Connecting without a wireless router (access point)
Connect a mobile device to the unit directly.
You can use the application for smartphone / tablet “AV CONTROLLER” to control the
unit from mobiles devices or enjoy music files stored on mobiles devices on the unit.
Selecting the connection method
Select a connection method according to your network environment.
■ Connecting with a wireless router (access point)
Connect the unit to a wireless router (access point).
You can enjoy Internet radio, AirPlay, or music files stored on media servers (PC/NAS)
on the unit.
The unit
Mobile device
(such as iPhone)
Internet
For details on connection, see “Connecting a mobile device to the unit directly
(Wireless Direct)” (p.52).
Wireless router
• You cannot use Wireless Direct simultaneously with the wired (network cable) connection (p.34) or the
wireless network connection (p.47).
Modem
• When Wireless Direct is enabled, the following functions are not available.
– Internet radio
– Network services
– Playback of music stored on media servers (PC/NAS)
Mobile device
(such as iPhone)
The unit
• For details on “AV CONTROLLER”, visit the Yamaha website.
For details on connection, see “Connecting the unit to a wireless network” (p.47).
• You cannot use the wireless network connection simultaneously with the wired (network cable) connection
(p.34) or Wireless Direct (p.52).
• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
46
1 2 3 4 5 6 7 8 9 10
Connecting the unit to a wireless network
There are several methods to connect the unit to a wireless
network.
Select a connection method according to your environment.
Do you own iOS devices
(iPhone/iPad/iPod touch)?
Yes
A (p.47)
No
Does your wireless router
(access point) has a WPS
button?
4
Use the cursor keys to select “Setup” and press
ENTER.
5
6
Use the cursor keys (e/r) to select “Network”.
7
Use the cursor keys (q/w) and ENTER to check
“Wireless (Wi-Fi)” and select “OK”.
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
Yes
B (p.48)
ON SCREEN
No
Cursor keys
ENTER
C (p.49)
■ A: Sharing the iOS device setting
You can easily setup a wireless connection by applying the
connection settings on iOS devices (iPhone/iPad/iPod touch).
Before proceeding, confirm that your iOS device is connected to a
wireless router.
• The checkmark indicates the current setting.
8
Use the cursor keys (q/w) and ENTER to check
“Share Wi-Fi Settings (iOS)” and select “NEXT”.
• You need iOS device with iOS 5.0 or later. For details on supported devices, see
“Supported devices and file formats” (p.142).
1
2
Press z (receiver power) to turn on the unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
Press ON SCREEN.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
47
1 2 3 4 5 6 7 8 9 10
9
Connect the iOS device to the USB jack, and disable
the screen lock on the iOS device.
The unit (front)
■ B: Using the WPS push button
configuration
You can easily set up a wireless connection with one push of the
WPS button.
• This configuration does not work if the security method of your wireless router
(access point) is WEP. In this case, use other connection method.
ON SCREEN
Cursor keys
ENTER
10 Use the cursor keys (e/r) to select “NEXT” and
1
2
device.
When the connection process finishes, “Completed”
appears on the TV screen.
12 To exit from the menu, press ON SCREEN.
Hold down INFO (WPS) on the front panel for 3
seconds.
“Press WPS button on Access Point” appears on the front
display.
press ENTER.
11 Tap “Allow” in the message appeared on the iOS
Press z (receiver power) to turn on the unit.
3
Push the WPS button on the wireless router (access
point).
When the connection process finishes, “Completed”
appears on the front display.
If “Not connected” appears, repeat from Step 1 or try
another connection method.
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance,
which allows easy establishment of a wireless home network.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
48
1 2 3 4 5 6 7 8 9 10
■ C: Using other connection methods
If your wireless router (access point) does not support WPS push
button configuration method, follow the procedure below to
configure the wireless network settings.
1
2
Cursor keys
ENTER
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
3
4
Press ON SCREEN.
5
6
Use the cursor keys (e/r) to select “Network”.
7
Use the cursor keys (q/w) and ENTER to select the
desired connection method and select “NEXT”.
Press z (receiver power) to turn on the unit.
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
ON SCREEN
8
Use the cursor keys to select “Setup” and press
ENTER.
The following connection methods are available.
WPS Button
You can set up a wireless connection with the
WPS button while viewing the TV screen. Follow
the instructions displayed on the TV screen.
Share Wi-Fi
Settings (iOS)
See “Sharing the iOS device setting” (p.47).
Access Point
Scan
You can set up a wireless connection by
searching for an access point. For details on
settings, see “Searching for an access point”
(p.50).
Manual Setting
You can setup a wireless connection by entering
the required information (such as SSID)
manually. For details on settings, see “Setting up
the wireless connection manually” (p.50).
PIN Code
You can set up a wireless connection by entering
the unit’s PIN code into the wireless router
(access point). The method is available if the
wireless router (access point) supports the WPS
PIN code method. For details on settings, see
“Using the PIN code” (p.51).
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
Use the cursor keys (q/w) and ENTER to check
“Wireless (Wi-Fi)” and select “OK”.
• The checkmark indicates the current setting.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
49
1 2 3 4 5 6 7 8 9 10
❑ Searching for an access point
❑ Setting up the wireless connection manually
If you select “Access Point Scan” as the connection method, the
unit starts searching for access points. After a while, the list of
available access points appears on the TV screen.
If you select “Manual Setting” as the connection method, the
wireless connection setting screen appears on the TV.
1
Use the cursor keys and ENTER to check the
desired access point and select “NEXT”.
You need to setup the SSID (network name), encryption method
and security key for your network.
1
Use the cursor keys and ENTER to enter the SSID of
the access point and select “NEXT”.
2
Use the cursor keys (q/w) and ENTER to check the
security method of the access point and select
“NEXT”.
The wireless connection setting screen appears on the TV.
2
Use the cursor keys and ENTER to enter the
security key and select “NEXT”.
ON SCREEN
Cursor keys
ENTER
3
Use the cursor keys (e/r) to select “CONNECT”
and press ENTER to start the connection process.
When the connection process finishes, “Completed”
appears on the TV screen.
If “Not connected” appears, repeat from Step 1 or try
another connection method.
4
To exit from the menu, press ON SCREEN.
Settings
None, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (AES),
Mixed Mode
PREPARATIONS
➤ Connecting to a network device wirelessly
En
50
1 2 3 4 5 6 7 8 9 10
3
Use the cursor keys and ENTER to enter the
security key and select “NEXT”.
If you select “None” in Step 2, this setting is not available.
Proceed to Step 4.
❑ Using the PIN code
If you select “PIN Code” as the connection method, the list of
available access points appears on the TV screen.
1
If you select “WEP”, enter either 5 or 13 character string, or
10 or 26 hexadecimal digits.
If you select other method, enter either 8 to 63 character
string, or 64 hexadecimal digits.
Use the cursor keys and ENTER to check the
desired access point and select “NEXT”.
The PIN code of the unit appears on the TV screen.
2
Enter the unit’s PIN code into the wireless router
(access point).
For details on settings, refer to the instruction manual of the
wireless router (access point).
3
ON SCREEN
Use the cursor keys (e/r) to select “CONNECT”
and press ENTER to start the connection process.
When the connection process finishes, “Completed”
appears on the TV screen.
Cursor keys
ENTER
4
Use the cursor keys (e/r) to select “CONNECT”
and press ENTER to start the connection process.
When the connection process finishes, “Completed”
appears on the TV screen.
If “Not connected” appears, repeat from Step 1 or try
another connection method.
4
To exit from the menu, press ON SCREEN.
If “Not connected” appears, check that all the information is
entered correctly, and repeat from Step 1.
5
To exit from the menu, press ON SCREEN.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
51
1 2 3 4 5 6 7 8 9 10
Connecting a mobile device to the unit
directly (Wireless Direct)
7
Use the cursor keys (q/w) and ENTER to check
“Wireless Direct” and select “OK”.
Follow the procedure below to connect a mobile device to the unit
directly.
• Wireless Direct connection may be insecure since the communication is not
strongly encrypted. The unit may operate by playback operation on wireless
devices connected to the unit without permission.
1
2
ON SCREEN
Cursor keys
ENTER
Press z (receiver power) to turn on the unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
4
Press ON SCREEN.
5
6
Use the cursor keys (e/r) to select “Network”.
• The checkmark indicates the current setting.
8
Use the cursor keys (q/w) and ENTER to check the
desired security method and select “NEXT”.
Use the cursor keys to select “Setup” and press
ENTER.
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
Settings
None, WEP
• If you select “None”, the connection may be insecure since the
communication is not encrypted.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
52
1 2 3 4 5 6 7 8 9 10
9
Use the cursor keys and ENTER to enter the
security key and select “NEXT”.
If you select “None” in Step 8, this setting is not available.
Proceed to Step 10.
Otherwise, enter either 5 or 13 character string.
11 Configure the Wi-Fi settings of a mobile device.
For details on settings of your mobile device, refer to the
instruction manual of the mobile device.
a Enable the Wi-Fi function on the mobile device.
b Select the SSID displayed in Step 10 from the list of available
access points.
c When you are prompted for a password, enter the security key
displayed in Step 10.
12 To exit from the menu, press ON SCREEN.
ON SCREEN
Cursor keys
ENTER
10 Use the cursor keys (e/r) to select “OK” and press
ENTER to save the setting.
The settings made appear on the TV screen.
The SSID and security key information is required for setup
of a mobile device.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
53
PLAYBACK
Input selection keys
Basic playback procedure
1
Turn on the external devices (such as a TV or
BD/DVD player) connected to the unit.
2
Use the input selection keys to select an input
source.
3
Start playback on the external device or select a
radio station.
HDMI OUT
MUTE
VOLUME
ON SCREEN
Selecting an HDMI output jack
1
Press HDMI OUT to select an HDMI OUT jack.
Each time you press the key, the HDMI OUT jack to be
used for signal output changes.
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
HD 3
HDMIOUTSel.
OUT1+2
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Refer to the instruction manual for the external device.
For details on the following operations, see the
corresponding pages.
Cursor keys
ENTER
• Listening to FM/AM radio (p.63)
• Playing back iPod music (p.67)
• Playing back music stored on a USB storage device
(p.70)
• Playing back music stored on media servers (PCs/NAS)
(p.73)
Outputs the same signal at both the HDMI OUT 1
and HDMI OUT 2 jacks.
OUT 1
Output the signals at the selected HDMI OUT jack.
OUT 2
Off
Does not output the signals at the HDMI OUT jacks.
• You can also select an HDMI output jack by selecting a scene (p.55).
• Playing back music with AirPlay (p.80)
• When “OUT 1+2” is selected, the unit outputs video signals at the highest
resolution supported by both TVs (or projectors) connected to the unit. (For
example, if you have connected a 1080p TV to the HDMI OUT 1 jack and a 720p
TV to the HDMI OUT 2 jack, the unit outputs 720p video signals.)
Press VOLUME to adjust the volume.
• If the HDMI OUT 2 jack is assigned to Zone2 (“HDMI OUT2 Assign” (p.119)), you
can turn on/off each zone by pressing HDMI OUT repeatedly.
• Listening to Internet radio (p.77)
4
OUT 1+2
• To mute the audio output, press MUTE. Press MUTE again to unmute.
• To adjust the treble/bass settings, use the “Option” menu or
TONE/BALANCE on the front panel (p.94).
On-screen input selection
a Press ON SCREEN.
b Use the cursor keys to select “Input” and press ENTER.
c Use the cursor keys to select the desired input source and
press ENTER.
PLAYBACK ➤ Basic playback procedure
En
54
Selecting the input source and favorite settings with one touch (SCENE)
The SCENE function allows you to select the assigned input source, sound program, HDMI output and various settings with just one touch.
You can use up to 12 scenes to register your favorite settings and switch them depending on a playback source.
1
SCENE
Press SCENE.
The input source and settings registered to the
corresponding scene are selected. The unit turns on
automatically when it is in standby mode.
By default, the following settings are registered for each scene.
SCENE (SCENE key)
ON SCREEN
1 (BD/DVD)
2 (TV)
3 (NET)
4 (RADIO)
Input (p.54)
AV 1
AUDIO 1
NET RADIO
TUNER
Audio Select (p.96)
Auto
Auto
—
—
HDMI Output (p.54)
OUT 1+2
OUT 1+2
OUT 1+2
OUT 1+2
Sound Program (p.57)
Sci-Fi
STRAIGHT
7ch Stereo
7ch Stereo
Pure Direct Mode (p.112)
Auto
Auto
Auto
Auto
Enhancer (p.62)
Off
On
On
On
Input
Cursor keys
ENTER
HDMI Output
Mode
• You can select SCENE 1–4 by pressing SCENE on the remote control.
Additionally, you can create 8 scenes (SCENE 5–12) and select those scenes
from the “Scene” menu (p.99).
On-screen scene selection
a Press ON SCREEN.
b Use the cursor keys to select “Scene” and press ENTER.
c Use the cursor keys to select a desired scene and press
ENTER.
PLAYBACK ➤ Selecting the input source and favorite settings with one touch (SCENE)
En
55
Configuring scene assignments
1
Set the unit to the condition (such as input source
and sound program) that you want to assign to a
scene.
2
Hold down the desired SCENE key until “SET
Complete” appears on the front display.
SCENE
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
HD 3
SCENE1
SETComplete
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
• The SCENE link playback function allows you to start playback of an external
device connected to the unit via HDMI. To enable SCENE link playback, specify
the device type in “Device Control” (p.100) in the “Scene” menu.
Selecting setting items to be included as
scene assignments
In addition to the default scene assignments (Input, HDMI Output
and Mode), you can also include the following setting items as the
scene assignments in “Detail” (p.100) in the “Scene” menu.
Sound
Tone Control, YPAO Volume, Adaptive DRC,
Extra Bass
Surround
CINEMA DSP 3D Mode, Dialogue Lift, Dialogue
Level, Subwoofer Trim, Extended Surround
Video
Video Mode
Volume
Master Volume
Lipsync
Lipsync, Delay
Speaker Setup
Setting Pattern, PEQ Select
• (China model only)
To control your playback device after selecting a scene with the remote control of
the unit, change the external device assigned to the SCENE keys. For details,
refer to “Supplement for Remote Control” in the supplied CD-ROM.
PLAYBACK ➤ Selecting the input source and favorite settings with one touch (SCENE)
En
56
Selecting the sound mode
The unit is equipped with a variety of sound programs and
surround decoders that allow you to enjoy playback sources with
your favorite sound mode (such as sound field effect or stereo
playback).
❑ Selecting a sound program suitable for movies
• Press MOVIE repeatedly.
On-screen sound program/surround decoder selection
a Press ON SCREEN.
b Use the cursor keys to select “Sound Program” and press
ENTER.
c Use the cursor keys to select a sound program/surround
decoder and press ENTER.
This mode lets you enjoy sound field effects optimized for viewing
video sources, such as movies, TV programs, and games (p.58).
PROGRAM
ON SCREEN
Cursor keys
ENTER
❑ Selecting a sound program suitable for music or
stereo playback
• You can change the settings of the surround programs and surround decoders in
the “Sound Program” menu (p.101).
• Press MUSIC repeatedly.
• The sound mode can be applied separately to each input source.
This mode lets you enjoy sound field effects optimized for listening
music sources or stereo playback (p.59).
• When you play back audio signals with a sampling rate of higher than 96 kHz, the
straight decode mode (p.61) is automatically selected.
❑ Selecting a surround decoder
MOVIE
MUSIC
SUR.DECODE
STRAIGHT
ENHANCER
PURE DIRECT
• You can also switch the sound programs and surround decoder by pressing
PROGRAM.
• You can check which speakers are currently outputting sound by looking at the
speaker indicators on the unit’s front panel (p.10) or at the “Audio Signal” screen in
the “Information” menu (p.123).
• Press SUR.DECODE repeatedly.
This mode lets you enjoy unprocessed multichannel playback from
2-channel sources (p.61).
❑ Switching to the straight decode mode
• Press STRAIGHT.
This mode lets you enjoy unprocessed sounds in original channels
(p.61).
❑ Switching to the Pure Direct mode
• Press PURE DIRECT.
This mode lets you enjoy pure high fidelity sound by reducing the
electrical noise from other circuitry (p.62).
❑ Enabling Compressed Music Enhancer
• Press ENHANCER.
This mode lets you enjoy compressed music with additional depth
and breadth (p.62).
PLAYBACK ➤ Selecting the sound mode
En
57
Enjoying stereoscopic sound fields (CINEMA DSP 3D)
■ Sound programs suitable for movies (MOVIE)
The following sound programs are optimized for viewing video sources, such as
movies, TV programs, and games.
The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP
technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual
movie theaters or concert halls in your room and enjoy natural stereoscopic sound
fields.
❑ MOVIE THEATER
Standard
This program creates a sound field that emphasizes the surround feeling
without disturbing the original acoustic positioning of multichannel audio,
such as Dolby Digital and DTS. Its design is based on the concept of the
ideal movie theater, in which the audience is surrounded by beautiful
reverberations from the left, right, and rear.
Spectacle
This program delivers the scale and grandeur of spectacular movie
productions. It delivers an expansive sound space to match the
cinemascope wide-screen, and boasts a broad dynamic range, providing
everything from small delicate sounds to powerful loud booms.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the
latest Sci-Fi and SFX movies. You can enjoy a variety of
cinematographically created virtual spaces reproduced with clear
separation between dialogue, sound effects, and background music.
Adventure
This program is ideal for reproducing the sound design of action and
adventure movies precisely. The sound field restrains reverberations, but
puts emphasis on reproducing a sensation of expansiveness on both sides,
powerful space expanded widely to the left and right. The restrained depth
creates a clear and powerful space, while also maintaining the articulation
of the sounds and the separation of the channels.
Drama
This program features stable reverberations that match a wide range of
movie genres, from serious dramas to musicals and comedies. The
reverberations are modest, but suitably stereophonic. The sound effects
and background music are reproduced with a gentle echo that does not
impinge on the articulation of the dialogue. You’ll never get tired listening for
long periods.
Mono Movie
This program reproduces monaural video sources, such as classic movies,
in an atmosphere of a good old movie theater. The program creates a
pleasant space with depth, by adding breadth and the appropriate
reverberation to the original audio.
Sound program category
MUSIC
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
3
CLASSICAL
HallinVienna
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
“CINEMA DSP n” lights up
Sound program
• To use the conventional CINEMA DSP, set “CINEMA DSP 3D Mode” (p.112) in the “Setup” menu to “Off”.
• We recommend using front presence speakers in order to experience the full effect of the stereoscopic
sound fields. However, even when no front presence speakers are connected, the unit creates Virtual
Presence Speaker (VPS) using the front, center, and surround speakers to produce stereoscopic sound
fields. When VPS is working, “VIRTUAL” lights up in the front display.
PLAYBACK ➤ Selecting the sound mode
En
58
❑ ENTERTAINMENT
Sports
This program allows listeners to enjoy the rich vividness of sport broadcasts
and light entertainment programs. In sports broadcasts, the commentators’
voices are positioned clearly at the center, while the atmosphere inside the
stadium is realistically conveyed by the peripheral delivery of the sounds of
the fans in a suitable space.
Action Game
This program is suitable for action games, such as car racing and fighting
games. The reality of, and emphasis on, various effects makes the player
feel like they are right in the middle of the action, allowing for greater
concentration. Use this program in combination with Compressed Music
Enhancer for a more dynamic and strong sound field.
Roleplaying Game
This program is suitable for role-playing and adventure games. This
program adds depth to the sound field for natural and realistic reproduction
of background music, special effects, and dialogue from a wide variety of
scenes. Use this program in combination with Compressed Music
Enhancer for a clearer and more spatial sound field.
Music Video
This program allows you to enjoy videos of pop, rock, and jazz concerts, as
if you were there yourself. Immerse yourself in the hot concert atmosphere
thanks to the vividness of the singers and solos on stage, a presence
sound field that emphasizes the beat of rhythm instruments, and a surround
sound field that reproduces the space of a big live hall.
■ Sound programs suitable for music/stereo playback
(MUSIC)
The following sound programs are optimized for listening to music sources.
You can also select stereo playback.
❑ CLASSICAL
Hall in Munich
This program simulates a Munich concert hall with approximately 2,500
seats that uses stylish wood for the interior finishing. Fine, beautiful
reverberations spread richly, creating a calming atmosphere. The listener’s
virtual seat is at the center left of the arena.
Hall in Vienna
This program simulates a 1,700-seat, middle-sized concert hall with a
shoebox shape that is traditional in Vienna. Pillars and ornate carvings
create extremely complex reverberations from all around the audience,
producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling, like an
audience hall in a palace. It offers pleasant reverberations that are suitable
for courtly music and chamber music.
❑ LIVE/CLUB
Cellar Club
This program simulates an intimate concert venue with a low ceiling and
homey atmosphere. A realistic, live sound field delivers powerful sounds
that make you feel as if you are sitting in the front row in front of a small
stage.
The Roxy Theatre
This program creates the sound field of a 460-seat rock music concert
venue in Los Angeles. The listener’s virtual seat is at the center left of the
hall.
The Bottom Line
This program creates the sound field at stage front in The Bottom Line, a
famous New York jazz club once. The floor can seat 300 people to the left
and right in a sound field offering real and vibrant sound.
❑ STEREO
2ch Stereo
Use this program to mix down multichannel sources to 2 channels. When
multichannel signals are input, they are down mixed to 2 channels and
output from the front speakers (this program does not utilize CINEMA DSP).
7ch Stereo
Use this program to output sound from all speakers. When you play back
multichannel sources, the unit mixes down the source to 2 channels, and
then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties.
• CINEMA DSP 3D (p.58) and Virtual CINEMA DSP (p.60) do not work when “2ch Stereo” or “7ch Stereo” is
selected.
PLAYBACK ➤ Selecting the sound mode
En
59
■ Enjoying sound field effects without surround speakers
(Virtual CINEMA DSP)
If you select one of the sound programs (except 2ch Stereo and 7ch Stereo) when no
surround speakers are connected, the unit utilizes Yamaha’s original virtual surround
technology to reproduce up to 7-channel surround sound and enable you to enjoy the
well-oriented sound field only with the front-side speakers. We recommend using
presence speakers in order to enjoy more effective stereoscopic sound field.
• When Virtual CINEMA DSP is working, “VIRTUAL” lights up in the front display.
■ Enjoying surround sound with 5 speakers placed in
front (Virtual CINEMA FRONT)
If you have surround speakers but there is no space to place them in the rear of your
room, you can place them in the front (p.17) and enjoy multi-channel surround sound
using Virtual CINEMA FRONT.
When “Layout (Surround)” (p.110) in the “Setup” menu is set to “Front”, the unit creates
the virtual surround speakers in the rear side to allow you to enjoy multi-channel
surround sound with the 5 speakers placed in the front.
• When Virtual CINEMA FRONT is working, “VIRTUAL” lights up in the front display.
■ Enjoying surround sound with headphones
(SILENT CINEMA)
You can enjoy surround or sound field effects, like a multichannel speaker system, with
stereo headphones by connecting the headphones to the PHONES jack and selecting
a sound program or a surround decoder.
PLAYBACK ➤ Selecting the sound mode
En
60
Enjoying unprocessed playback
You can play back input sources without any sound field effect
processing.
■ Playing back in original channels
(straight decode)
When the straight decode mode is enabled, the unit produces
stereo sound from the front speakers for 2-channel sources such as
CDs, and produces unprocessed multichannel sounds for
multichannel sources.
1
The surround decoder enables unprocessed multichannel
playback from 2-channel sources. When a multichannel source is
input, it works the same way as the straight decode mode.
For details on each decoder see “Glossary” (p.139).
1
Press SUR.DECODE to select a surround decoder.
Each time you press the key, the surround decoder
changes.
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
Press STRAIGHT.
HD 3
Each time you press the key, the straight decode mode is
enabled or disabled.
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
HD 3
STRAIGHT
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
SUR.DECODE
ProLogic
bPro Logic
bPLIIx Movie
bPLII Movie
bPLIIx Music
SUR.DECODE
STRAIGHT
■ Playing back 2-channel sources in
multichannel (surround decoder)
bPLII Music
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Uses the Dolby Pro Logic decoder suitable for all
sources.
Use the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for movies.
Use the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for music.
• To enable 6.1/7.1-channel playback from 5.1-channel sources when surround
back speakers are used, set “Extended Surround” (p.113) in the “Setup” menu to
a setting other than “Off”.
bPLIIx Game
Use the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for games.
• If “Layout (Surround)” (p.110) in the “Setup” menu is set to “Front”, Virtual
CINEMA FRONT (p.60) works when multi-channel source is played back.
bPLII Game
Neo:6 Cinema
Uses the DTS Neo:6 decoder suitable for movies.
Neo:6 Music
Uses the DTS Neo:6 decoder suitable for music.
• You cannot select the Dolby Pro Logic IIx decoders when headphones are
connected or when “Surround Back” (p.109) in the “Setup” menu is set to
“None”.
PLAYBACK ➤ Selecting the sound mode
En
61
Enjoying pure high fidelity sound (Pure Direct)
When the Pure Direct mode is enabled, the unit plays back the
selected source with the least circuitry in order to reduce the
electrical noise from other circuitry (such as the front display). It
allows you to enjoy Hi-Fi sound quality.
1
Press PURE DIRECT.
Each time you press the key, the Pure Direct mode is
enabled or disabled.
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
HD
PUREDIRECT
3
MUTE VOLUME
ADAPTIVE DRC
Enjoying compressed music with enhanced
sound (Compressed Music Enhancer)
Compressed Music Enhancer adds depth and breadth to the
sound, allowing you to enjoy a dynamic sound close to the original
sound before it was compressed. This function can be used along
with any other sound modes.
1
Press ENHANCER.
Each time you press the key, Compressed Music Enhancer
is enabled or disabled.
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
EnhancerOn
• When the Pure Direct mode is enabled, the following functions are not available.
VOLUME
ENHANCER
– Some settings for the speakers or sound programs
SL
L C R
SW
SR
SBL SB SBR
– Operating the on-screen menu and some items in the “Option” menu
– Using the multi-zone function
“ENHANCER” lights up
– Output from the AV OUT jacks
– Viewing information on the front display (when not in operation)
PURE DIRECT
• Compressed Music Enhancer does not work on signals whose sampling
rate is over 48 kHz.
ENHANCER
• You can also use “Enhancer” (p.95) in the “Option” menu to enable/disable
Compressed Music Enhancer.
PLAYBACK ➤ Selecting the sound mode
En
62
Listening to FM/AM radio
You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
TUNER
• The radio frequencies differ depending on the country or region where the unit is
being used. The explanation of this section uses a display with frequencies used
in Australia model.
• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM
antennas.
Selecting a frequency for reception
1
Press TUNER to select “TUNER” as the input
source.
2
Press BAND to select a band (FM or AM).
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
SLEEP
FM87.50MHz
3
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
HD 3
Use the following keys to set a frequency.
TUNING: Increase/decrease the frequency. Hold down the
key for about a second to search stations automatically.
BAND
Numeric keys: Enter a frequency directly. For example, to
select 98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).
TUNING
FM98.50MHz
STEREO TUNED
Numeric keys
VOLUME
SL
L C R
SW
SR
SBL SB SBR
“TUNED” lights up when a signal is received from a radio
station.
“STEREO” also lights up when a stereo signal is received.
• “Wrong Station!” appears when you enter a frequency that is out of
reception range.
• You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM
radio reception in “FM Mode” (p.96) in the “Option” menu. When the signal
reception for an FM radio station is unstable, switching to monaural may
improve it.
PLAYBACK ➤ Listening to FM/AM radio
En
63
Registering favorite radio stations (presets)
You can register up to 40 radio stations as presets. Once you have
registered stations, you can easily tune into them by selecting their
preset numbers.
TUNER
• You can automatically register FM radio stations that have strong signals by using
“Auto Preset” (p.66).
Tune into a registered radio station by selecting its preset number.
1
Press TUNER to select “TUNER” as the input
source.
2
Press PRESET repeatedly to select the desired radio
station.
You can also enter a preset number (01 to 40) directly by
using the numeric keys after pressing PRESET once.
■ Registering a radio station
Select a radio station manually and register it to a preset number.
PRESET
■ Selecting a preset station
Preset
01:FM98.50MHz
VOLUME
1
Follow “Selecting a frequency for reception” (p.63)
to tune into the desired radio station.
2
Hold down MEMORY for more than 2 seconds.
• “No Presets” appears when no radio stations are registered.
The first time that you do register a station, the selected
radio station will be registered to the preset number “01”.
Thereafter, each radio station you select will be registered
to the next empty (unused) preset number after the most
recently registered number.
• “Wrong Num.” appears when an invalid number is entered.
STEREO TUNED
SL
L C R
SW
SR
SBL SB SBR
• “Empty” appears when a preset number not in use is entered.
• To clear preset stations, use “Clear Preset” or “Clear All Preset” (p.66).
Preset number
Numeric keys
MEMORY
Preset
STEREO TUNED
01:FM98.50MHz
PresetOK
VOLUME
SL
L C R
SW
SR
SBL SB SBR
• To select a preset number for registering, press MEMORY once after tuning
into the desired radio station, use PRESET or numeric keys to select a
preset number, and then press MEMORY again.
“Empty” (not in use) or the frequency currently registered
Preset
STEREO TUNED
01:Empty
FM98.50MHz
VOLUME
SL
L C R
SW
SR
SBL SB SBR
PLAYBACK ➤ Listening to FM/AM radio
En
64
Operating the radio on the TV
Menu
You can view the radio information or select a radio station on the
TV.
1
TUNER
Submenu
Tuning (+/-)
Selects a frequency.
Auto (+/-)
Selects a radio station automatically.
Memory
Registers the selected station as
presets.
Direct
Enters a frequency directly.
Manual Tuning
Press TUNER to select “TUNER” as the input
source.
The playback screen is displayed on the TV.
■ Playback screen
1
3
Function
Browse
Moves to the browse screen (preset
station list).
Screen Off
Closes the screen display and shows
the background. Press one of the
menu operation keys to redisplay it.
2
4
Menu operation keys
Cursor keys
ENTER
RETURN
1 Radio station information
Displays the information of the selected radio station such as the selected
band (FM/AM) and frequency.
2 Band icon
Select this icon and press ENTER to switch between FM and AM.
3 TUNED/STEREO indicators
“TUNED” lights up when a signal is received from a radio station.
“STEREO” lights up when a stereo signal is received.
4 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
PLAYBACK ➤ Listening to FM/AM radio
En
65
■ Browse screen
1
3
2
1 Preset station list
Displays the list of preset stations. Use the cursor keys (q/w) to select a
preset station and press ENTER to tune into it.
2 Preset number
3 Operation menu
Menu operation keys
Cursor keys
ENTER
RETURN
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
Submenu
Function
Memory
Registers the current station to the
preset number selected in the list.
Auto Preset
Automatically registers FM radio
stations with strong signals (up to 40
stations).
Clear Preset
Clear the preset station selected in the
list.
Clear All Preset
Clear all the preset stations.
Utility
1 Page Up
1 Page Down
Moves to the previous/next page of the
list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows
the background. Press one of the
menu operation keys to redisplay it.
PLAYBACK ➤ Listening to FM/AM radio
En
66
Playing back iPod music
You can play back iPod music on the unit using a USB cable
supplied with the iPod.
Playback of iPod content
Follow the procedure below to operate the iPod contents and start
playback.
USB
• For details on playable iPod devices, see “Supported devices and file formats”
(p.142).
You can control the iPod with the menu displayed on the TV screen.
1
Connecting an iPod
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
Connect your iPod to the unit with the USB cable supplied with the
iPod.
Cursor keys
ENTER
RETURN
1
2
Connect the USB cable to the iPod.
Connect the USB cable to the USB jack.
The unit (front)
• If playback is ongoing on your iPod, the playback screen is displayed.
2
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
DOCK
TAG
HD
IN OUT 1 OUT 2
PRE AMP PARTY
ZONE ZONE ZONE
2
3
4
SLEEP
HD 3
USB
Connected
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
• The iPod charges while it is connected to the unit. If you set the unit to standby
mode while the iPod is charging, the iPod continues to charge up to 4 hours. If
“Network Standby” (p.116) in the “Setup” menu is set to “On”, it continues to
charge without limit.
• Disconnect the iPod from the USB jack when it is not in use.
• To return to the previous screen, press RETURN.
• To operate the iPod manually to select content or control playback, switch to the
simple play mode (p.69).
PLAYBACK ➤ Playing back iPod music
En
67
■ Browse screen
■ Playback screen
1
2
3
1
2
3
5
4
1 Status indicators
Display the current shuffle/repeat settings (p.69) and playback status
(such as play/pause).
3 Contents list
External device
operation keys
Displays the list of iPod content. Use the cursor keys (q/w) to select an
item and press ENTER to confirm the selection.
4 Item number/total
5 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
Menu
Display the current shuffle/repeat settings (p.69) and playback status
(such as play/pause).
2 Playback information
2 List name
Menu operation keys
Cursor keys
ENTER
RETURN
1 Status indicators
Displays the artist name, album name, song title, and elapsed/remaining
time.
Use the cursor keys (q/w) to select scrollable information.
3 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
Function
1 Page Up
Moves to the previous/next page of the list.
1 Page Down
10 Pages Up
Moves 10 pages forward/backward.
Play Control
10 Pages Down
Submenu
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
f
g
Return
Returns to the higher-level list.
h
Now Playing
Moves to the playback screen.
j
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
Skips forward/backward.
Searches forward/backward (by holding
down).
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
• You can also use the external device operation keys on the remote control to
control playback.
PLAYBACK ➤ Playing back iPod music
En
68
■ Operating the iPod itself or remote control
(simple play)
1
You can configure the shuffle/repeat settings of your iPod.
Press MODE to switch to the simple play mode.
The TV menu screen turns off and iPod operations are
enabled.
2
■ Shuffle/repeat settings
• During simple play, configure the shuffle/repeat settings directly on your iPod or
press MODE to display the TV menu screen and then follow the procedure below.
To display the TV menu screen, press MODE again.
1
When “USB” is selected as the input source, press
OPTION.
Operate your iPod itself or the remote control to
start playback.
2
Use the cursor keys to select “Shuffle” (Shuffle) or
“Repeat” (Repeat) and press ENTER.
Operational remote control
Function
keys
OPTION
Cursor keys
ENTER
RETURN
Cursor keys
Select an item.
• To return to the previous screen during menu operations, press RETURN.
ENTER
Confirms the selection.
• Texts in parentheses denote indicators on the front display.
RETURN
Returns to the previous screen.
a
External device
operation keys
MODE
External device
operation keys
d
Starts playback or stops playback
temporarily.
s
Stops playback.
f
g
h
j
Skips forward/backward.
3
Use the cursor keys (e/r) to select a setting.
Item
Shuffle
(Shuffle)
Searches forward/backward (by holding
down).
Repeat
(Repeat)
4
Setting
Function
Off (Off)
Turns off the shuffle function.
Songs (Songs)
Plays back songs in random order.
“x” appears in the TV screen.
Albums
(Albums)
Plays back albums in random order.
“x” appears in the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears in the TV screen.
All (All)
Plays back all songs repeatedly.
“v” appears in the TV screen.
To exit from the menu, press OPTION.
PLAYBACK ➤ Playing back iPod music
En
69
Playing back music stored on a USB storage device
You can play back music files stored on a USB storage device on
the unit.
USB
The unit supports USB mass storage class devices (FAT16 or
FAT32 format).
• Connect a USB memory device directly to the USB jack of the unit. Do not use
extension cables.
Playback of USB storage device contents
• For details on playable file formats, see “Supported devices and file formats”
(p.142).
Follow the procedure below to operate the USB storage device
contents and start playback.
Connecting a USB storage device
1
You can control the USB memory device with the menu displayed
on the TV screen.
Connect the USB storage device to the USB jack.
1
The unit (front)
IN OUT 1 OUT 2
PRE AMP PARTY
ZONE ZONE ZONE
2
3
4
SLEEP
HD 3
USB
Connected
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
• If playback is ongoing on your USB storage device, the playback screen is
displayed.
USB storage device
DOCK
TAG
HD
• Stop playback of the USB storage device before disconnect it from the USB jack.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
• If the USB storage device contains many files, it may take time to load the them. In
this case, “Loading...” appears in the front display.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
70
2
■ Browse screen
Use the cursor keys to select an item and press
ENTER.
1
2
3
If a song is selected, playback starts and the playback
screen is displayed.
5
4
1 Status indicators
Display the current shuffle/repeat settings (p.72) and playback status
(such as play/pause).
2 List name
3 Contents list
Menu operation keys
Cursor keys
ENTER
RETURN
Displays the list of USB storage device contents. Use the cursor keys
(q/w) to select an item and press ENTER to confirm the selection.
• To return to the previous screen, press RETURN.
• Files not supported by the unit cannot be selected.
• If the unit detects a series of unsupported files (such as images and hidden
files) during playback, playback stops automatically.
4 Item number/total
5 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
Menu
Function
1 Page Up
Moves to the previous/next page of the list.
1 Page Down
10 Pages Up
Moves 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
71
■ Playback screen
■ Shuffle/repeat settings
You can configure the shuffle/repeat settings for playback of USB
storage device contents.
1
2
3
1
When “USB” is selected as the input source, press
OPTION.
2
Use the cursor keys to select “Shuffle” (Shuffle) or
“Repeat” (Repeat) and press ENTER.
1 Status indicators
• To return to the previous screen during menu operations, press RETURN.
Display the current shuffle/repeat settings (p.72) and playback status
(such as play/pause).
• Texts in parentheses denote indicators on the front display.
2 Playback information
OPTION
Menu operation keys
Cursor keys
ENTER
RETURN
External device
operation keys
3
Displays the artist name, album name, song title, and elapsed time.
Use the cursor keys (q/w) to select scrollable information.
Item
3 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
Play Control
Submenu
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
Shuffle
(Shuffle)
Repeat
(Repeat)
f
g
Use the cursor keys (e/r) to select a setting.
Skips forward/backward.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
4
Setting
Function
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order.
“x” appears on the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly.
“v” appears on the TV screen.
To exit from the menu, press OPTION.
• You can also use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
72
Playing back music stored on media servers (PCs/NAS)
You can play back music files stored on your PC or DLNA-compatible NAS on the unit.
• To use this function, the unit and your PC must be connected to the same router (p.34). You can check
whether the network parameters (such as the IP address) are properly assigned to the unit in “Network”
(p.124) in the “Information” menu.
• The audio may be interrupted while using the wireless network connection. In this case, use the wired
network connection.
• For details on playable file formats, see “Supported devices and file formats” (p.142).
❑ For Windows Media Player 11
1
2
3
Start Windows Media Player 11 on your PC.
4
Click “OK” to exit.
Select “Library”, then “Media Sharing”.
Check the “Share my media to” box, select the unit’s icon, and click
“Allow”.
Media sharing setup
To play back music files stored on your PC or DLNA-compatible NAS, first you need to
configure the media sharing setting on each music server.
■ For a PC with Windows Media Player installed
❑ For Windows Media Player 12
1
2
3
4
Start Windows Media Player 12 on your PC.
5
Click “OK” to exit.
• For details on media sharing settings, refer to Windows Media Player help.
■ For a PC or a NAS with other DLNA server software
installed
Refer to the instruction manual for the device or software and configure the media
sharing settings.
Select “Stream”, then “Turn on media streaming”.
Click “Turn on media streaming”.
Select “Allowed” from the drop-down list next to the unit’s model
name.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
73
Playback of PC music contents
3
Follow the procedure below to operate the PC music contents and
start playback.
NET
You can control the PC/NAS with the menu displayed on the TV
screen.
1
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
Press NET repeatedly to select “SERVER” as the
input source.
The browse screen is displayed on the TV.
• To return to the previous screen, press RETURN.
Cursor keys
ENTER
RETURN
• Files not supported by the unit cannot be selected.
• If the unit detects a series of unsupported files (such as images and hidden
files) during playback, playback stops automatically.
• If playback of a music file selected from the unit is ongoing on your PC, the
playback screen is displayed.
2
Use the cursor keys to select a music server and
press ENTER.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
74
■ Browse screen
■ Playback screen
1
2
3
1
2
3
5
4
1 Status indicators
1 Status indicators
Display the current shuffle/repeat settings (p.76) and playback status
(such as play/pause).
2 Playback information
2 List name
Displays the artist name, album name, song title, and elapsed time.
Use the cursor keys (q/w) to select scrollable information.
3 Contents list
Menu operation keys
Cursor keys
ENTER
RETURN
External device
operation keys
Displays the list of PC content. Use the cursor keys (q/w) to select an
item and press ENTER to confirm the selection.
3 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
4 Item number/total
5 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
Menu
Display the current shuffle/repeat settings (p.76) and playback status
(such as play/pause).
Menu
Function
1 Page Up
Moves to the previous/next page of the list.
Play Control
1 Page Down
Submenu
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
f
10 Pages Up
g
Moves 10 pages forward/backward.
Skips forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
• You can also use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
• You can also use a DLNA-compatible Digital Media Controller (DMC) to control
playback. For details, see “DMC Control” (p.98).
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
75
■ Shuffle/repeat settings
You can configure the shuffle/repeat settings for the playback of PC
music content.
1
When “SERVER” is selected as the input source,
press OPTION.
2
Use the cursor keys to select “Shuffle” (Shuffle) or
“Repeat” (Repeat) and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
• Text in parentheses denotes indicators on the front display.
OPTION
Cursor keys
ENTER
RETURN
3
Use the cursor keys (e/r) to select a setting.
Item
Shuffle
(Shuffle)
Repeat
(Repeat)
4
Setting
Function
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order.
“x” appears on the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly.
“v” appears on the TV screen.
To exit from the menu, press OPTION.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
76
Listening to Internet radio
You can listen to Internet radio stations from all over the world.
NET
• To use this function, the unit must be connected to the Internet (p.34). You can
check whether the network parameters (such as the IP address) are properly
assigned to the unit in “Network” (p.124) in the “Information” menu.
Playback of Internet radio
1
Press NET repeatedly to select “NET RADIO” as the
input source.
The browse screen is displayed on the TV.
• You may not be able to receive some Internet radio stations.
• The unit uses the vTuner Internet radio station database service.
• This service may be discontinued without notice.
Cursor keys
ENTER
RETURN
2
Use the cursor keys to select an item and press
ENTER.
If an Internet radio station is selected, playback starts and
the playback screen is displayed.
• To return to the previous screen, press RETURN.
PLAYBACK ➤
Listening to Internet radio
En
77
■ Browse screen
■ Playback screen
1
2
3
1
2
3
5
4
1 Playback indicator
1 Playback indicator
2 List name
2 Playback information
Displays the station name, album name, song title, and elapsed time.
Use the cursor keys (q/w) to select scrollable information.
3 Contents list
Displays the list of Internet radio content. Use the cursor keys (q/w) to
select an item and press ENTER to confirm the selection.
Menu operation keys
Cursor keys
ENTER
RETURN
External device
operation keys
4 Item number/total
5 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
Menu
Function
Bookmark On
(Bookmark Off)
Adds/removes the station selected in the list to/from
the “Bookmarks” folder (p.79).
3 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
Submenu
Adds the current station to the
“Bookmarks” folder (p.79).
Bookmark On
Play Control
Function
s
Stops playback.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
1 Page Up
Moves to the previous/next page of the list.
1 Page Down
10 Pages Up
Moves 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
• You can also use the external device operation key (s) on the remote control to
stop playback.
• Some information may not be available depending on the station.
PLAYBACK ➤
Listening to Internet radio
En
78
Registering favorite Internet radio stations (bookmarks)
By registering your favorite Internet radio stations to “Bookmarks”,
you can quickly access to them from the “Bookmarks” folder in the
browse screen.
3
■ Registering the station on the
browse/playback screen
1
Select the desired Internet radio station in the
browse screen or start playback of it to display the
playback screen.
2
Press the cursor key (r) to select “Bookmark On”
and press ENTER.
Access the vTuner website
(http://yradio.vtuner.com/) with the web browser on
your PC and enter the vTuner ID.
You can switch the language.
The selected station is added to the “Bookmarks” folder.
Cursor keys
ENTER
Enter the vTuner ID in this area.
• To remove stations from the “Bookmarks” folder, select the station in the
“Bookmarks” folder and then “Bookmark Off”.
■ Registering the station on the vTuner
website
1
Select any of Internet radio stations on the unit.
This operation is necessary to register the radio station for
the first time.
2
Check the vTuner ID of the unit.
• To use this feature, you need to create your personal account. Create your
account using your e-mail address.
4
Register your favorite radio stations.
Click the “Add” icon (❤+) next to the station name.
• To remove the station from the “Bookmarks” folder, select “Bookmarks” in
the Home screen, and then click the “Remove” icon (❤–) next to the station
name.
You can find the vTuner ID (MAC address of the unit) in
“Network” (p.124) in the “Information” menu.
PLAYBACK ➤
Listening to Internet radio
En
79
Playing back music with AirPlay
The AirPlay function allows you to play back iTunes/iPod music on the unit via network.
iTunes
Playback of iTunes/iPod music contents
Follow the procedure below to play back iTunes/iPod music contents on the unit.
PC
1
Router
The unit
Turn on the unit, and start iTunes on the PC or display the playback
screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay icon (
iTunes (example)
(wired or wireless)
) appears.
iPod (example)
iPhone/iPad/
iPod touch
• If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.
• To use this function, the unit and your PC or iPod must be connected to the same router. You can check
whether the network parameters (such as the IP address) are properly assigned to the unit in “Network”
(p.124) in the “Information” menu.
2
• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to
connect. Connect the iPod to the SSID which can access the unit.
On the iTunes/iPod, click (tap) the AirPlay icon and select the unit
(network name of the unit) as the audio output device.
iTunes (example)
iPod (example)
• For details on supported iPod devices, see “Supported devices and file formats” (p.142).
Network name of the unit
3
Select a song and start playback.
The unit automatically selects “AirPlay” as the input source and starts playback.
The playback screen is displayed on the TV.
PLAYBACK ➤
Playing back music with AirPlay
En
80
Menu
• You can turn on the unit automatically when starting playback on iTunes or iPod by
setting “Network Standby” (p.116) in the “Setup” menu to “On”.
• You can edit the network name (the unit’s name on the network) displayed on
iTunes/iPod in “Network Name” (p.117) in the “Setup” menu.
Play Control
• If you select the other input source on the unit during playback, playback on the
iTunes/iPod stops automatically.
• You can adjust the unit’s volume from the iTunes/iPod during playback. To disable
volume controls from iTunes/iPod, set “Volume Interlock” (p.98) in the “Input” menu
to “Off”.
Submenu
Function
a
Resumes playback from pause.
d
Stops playback temporarily.
f
g
Skips forward/backward.
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
Screen Off
Caution
• When you use iTunes/iPod controls to adjust volume, the volume may be
unexpectedly loud. This could result in damage to the unit or speakers. If the
volume suddenly increases during playback, stop playback on the iTunes/iPod
immediately.
Menu operation keys
Cursor keys
ENTER
RETURN
External device
operation keys
• You can also use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
• To control iTunes playback with the remote control of the unit, you need to
configure the iTunes preferences to enable iTunes control from remote speakers
in advance.
■ Playback screen
1
2
iTunes (example of English version)
3
1 Playback indicator
2 Playback information
Displays the artist name, album name, song title, and elapsed/remaining
time.
Use the cursor keys (q/w) to select scrollable information.
Check this box
3 Operation menu
Press the cursor keys (r) and then use the cursor keys (q/w) to select
an item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
PLAYBACK ➤
Playing back music with AirPlay
En
81
Playing back music in multiple rooms (multi-zone)
The multi-zone function allows you to play back different input sources in the room
where the unit is installed (main zone) and in another room (Zone2).
For example, while you are watching TV in the living room (main zone), another person
can listen to radio in the study room (Zone2).
■ Enjoying videos/music in another room
You can enjoy videos/music using a TV placed in another room.
❑ Enjoying videos/music using a TV and speakers
• Video/audio signals that can be output to Zone2 vary depending on how you connect the device in
Zone2 to the unit’s output jacks. For details, see “Multi-zone output” (p.144).
Video
(ZONE OUT)
• Since there are many possible ways to use the unit in a multi-zone configuration, we recommend that
you consult with your nearest authorized Yamaha dealer or service center about the multi-zone
connections that best meet your requirements.
Audio
(SPEAKERS or
ZONE OUT)
Multi-zone configuration examples
Study room
(Zone2)
■ Enjoying music in another room
You can enjoy music using speakers placed in another room.
Living room (main zone)
Connections
TV (for analog video playback): p.84
Speakers (connecting to the unit directly): p.23
Speakers (using an external amplifier): p.84
Audio
(SPEAKERS or
ZONE OUT)
Study room
(Zone2)
• Analog video/audio sources (including FM/AM radio), and USB and network sources can be output to
Zone2. To enjoy the playback of an external device in Zone2, you need to connect the device to analog
video/audio jacks of the unit.
Living room (main zone)
Connections
Speakers (connecting to the unit directly): p.23
Speakers (using an external amplifier): p.84
• Analog audio sources (including FM/AM radio), and USB and network sources can be output to Zone2. To
enjoy the playback of an external device in Zone2, you need to connect the device to analog audio jacks of
the unit.
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
82
❑ Enjoying videos/music using only a TV
Preparing Zone2
Connect the device that will be used in Zone2 to the unit.
Caution
• Remove the unit’s power cable from the AC wall outlet before connecting speakers or an external
amplifier.
Video/audio
(HDMI)
• Ensure that the core wires of the speaker cable do not touch one another or come into contact with the
unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit,
“Check SP Wires” will appear on the front display when the unit is turned on.
Study room
(Zone2)
Living room (main zone)
Connection
TV: p.85
• Only HDMI video/audio sources can be output to Zone2. To enjoy the playback of an external device in
Zone2, you need to connect the device to an HDMI jack of the unit.
■ Connecting speakers to play back audio
Connect speakers to play back audio in Zone2. The connection method varies
depending on the amplifier being used (the unit or an external amplifier).
❑ Using the unit’s internal amplifier
Connect the speakers placed in Zone2 to the unit with speaker cables. For details, see
“Connecting Zone2 speakers” (p.23).
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
83
❑ Using an external amplifier
■ Connecting a video monitor to play back analog videos
Connect the external amplifier (with volume control) placed in Zone2 to the unit with a
stereo pin cable and connect speakers to the external amplifier.
Connect a video monitor to watch analog videos at Zone2. Depending on the video
input jacks available on your video monitor, choose one of the video connection
methods.
The unit (rear)
ZONE OUT
(ZONE 2) jacks
• The video conversion between the analog video jacks does not work for Zone2 video output. To watch
videos played back on a video device on the Zone2 video monitor, you need to connect the video monitor to
the unit in the same way as the video device. For example, if you want to watch videos input from the DVD
player via a component video cable, connect the video monitor to the MONITOR OUT/ZONE OUT
(COMPONENT VIDEO) jacks with a component video cable.
ZONE OUT
L
R
The unit (rear)
ZONE 2
External amplifier
Audio input
(analog stereo)
Video input
(component video or
composite video)
L
MONITOR OUT/
ZONE OUT
R
PB
Y
PR
PR
COMPONENT VIDEO
PB
AUDIO
Y
Y
PR
PB
PR
PB
V
Y
ZONE OUT jacks
(COMPONENT VIDEO or VIDEO)
VIDEO
V
Zone2
Main zone
Zone2
Main zone
To assign the MONITOR OUT/ZONE OUT jacks to the Zone2 video monitor, set “Monitor
Out Assign” (p.119) in the “Setup” menu to “Zone2”.
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
84
■ Connecting an HDMI-compatible device to play back
videos/audio
Connect an HDMI-compatible device (such as a TV) to play back videos/audio at
Zone2. If you connect an AV amplifier, you can enjoy multi-channel playback in another
room (Zone2).
• Videos/audio interruptions may happen in another zone when any of the following operations is
performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings (such as “Extended Surround”)
• To watch videos played back on a video device at Zone2, you need to connect the video device to the unit
with an HDMI cable (p.28).
• We recommend that you disable HDMI Control on the playback devices connected to the unit.
• On-screen operations are not available for Zone2.
The unit (rear)
HDMI OUT 2
(ZONE OUT) jack
(Example: using a TV)
HDMI input
HDMI OUT
2
HDMI
(ZONE OUT)
HDMI
HDMI
Zone2
(Example: using an AV amplifier)
HDMI input
HDMI
HDMI
Main zone
Zone2
To assign the HDMI OUT 2 (ZONE OUT) jack to Zone2, set “HDMI OUT2 Assign”
(p.119) in the “Setup” menu to “Zone2”.
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
85
■ Operating the unit from Zone2 (remote connection)
You can operate the unit or external devices from Zone2 using the remote control
supplied with each device if you connect an infrared signal receiver/emitter to the unit’s
REMOTE IN/OUT jacks.
Remote connections between Yamaha products
An infrared signal transmitter is not required if you are using Yamaha products that
support remote connections, as the unit does. You can transmit remote control signals
by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an
infrared signal receiver.
REMOTE IN/OUT jacks
• (China model only)
You can operate external devices with the supplied remote control if you register a remote control code for
each device. For details, refer to “Supplement for Remote Control” on the supplied CD-ROM.
REMOTE
REMOTE IN/OUT jacks
REMOTE
IN
IN
OUT
OUT
REMOTE IN/OUT jacks
Infrared signal
receiver
The unit (rear)
Yamaha products
(up to six, including the unit)
REMOTE
IN
OUT
Remote control
Zone2
Infrared signal
transmitter
Infrared signal
receiver
External device
(such as a CD player)
Remote control
(supplied with each device)
Zone2
Main zone
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
86
z
Input selection keys
Controlling Zone2
1
2
MAIN/ZONE2
3
4
Start playback on the external device or select a
radio station.
Set MAIN/ZONE2 to “ZONE2”.
Refer to the instruction manual for the external device.
Press z (receiver power).
For details on the following operations, see the
corresponding pages.
Each time you press the key, Zone2 is enabled or disabled.
• Listening to FM/AM radio (p.63)
When Zone2 is enabled, “ZONE2” lights up in the front
display.
• Playing back iPod music (p.67)
• Playing back music stored on a USB storage device
(p.70)
Use the input selection keys to select an input
source.
• Playing back music stored on media servers (PCs/NAS)
(p.73)
• Listening to Internet radio (p.77)
• Video/audio signals that can be output to Zone2 vary depending on how you
connect the device in Zone2 to the unit’s output jacks. For details, see
“Multi-zone output” (p.144).
• You cannot select USB and network sources exclusively for each zone. For
example, if you select “SERVER” for Zone2 when “USB” is selected for the
main zone, the input source for the main zone also switches to “SERVER”.
• Playing back music with AirPlay (p.80)
• The on-screen operations are not available for Zone2. Use the front display
or web control (p.89) to control Zone2.
• AirPlay is available in Zone2 only when AirPlay playback is ongoing in the
main zone.
Caution
• To avoid unexpected noise, never play back DTS-CDs in Zone2.
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
87
■ Other operations for Zone2
The following functions are also available when Zone2 is enabled.
The party mode allows you to play back in Zone2 the same music
that is being played back in the main zone. During the party mode,
stereo playback is automatically selected for all zones. Utilize this
function when you want to use main zone music as background
music for a house party.
Adjusting the volume
Press VOLUME or MUTE.
Selecting the input source and settings at once (SCENE)
Press SCENE.
PARTY
SCENE
1
Press PARTY.
• To register the current settings (input source, volume and tone control) to a scene,
hold down the desired SCENE key until “SET Complete” appears on the front
display.
Each time you press the key, the party mode is turned on or
off.
Setting the sleep timer
When the party mode is turned on, “PARTY” lights up in the
front display.
VOLUME
MUTE
■ Enjoying the same source in multiple
rooms (party mode)
Press SLEEP repeatedly to set the time (120 min, 90 min, 60 min, 30
min, off).
Adjusting the high-/low-frequency range of sounds
a Press ZONE CONTROL on the front panel.
b Press TONE/BALANCE repeatedly to select “Treble” or “Bass”.
• If the party mode does not work on Zone2, set “Party Mode Set” (p.119) in
the “Setup” menu to “Enable” (default).
• If “HDMI OUT2 Assign” (p.119) in the “Setup” menu is set to “Zone2”, Zone2
output is available only when an HDMI input is selected in the main zone.
c Press PROGRAM to make an adjustment.
SLEEP
Setting range
-10.0 dB to +10.0 dB (2.0 dB increments)
Default
0.0 dB
Adjusting the Zone2 front speaker balance
a Press ZONE CONTROL on the front panel.
b Press TONE/BALANCE repeatedly to select “Balance”.
c Press PROGRAM to make an adjustment.
• When “HDMI OUT2 Assign” (p.119) in the “Setup” menu is set to “Zone2”, the
following functions are not available.
– Adjusting the volume, high/low-frequency sound and front speaker balance
– Registering the volume and tone control settings to a scene
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
88
Controlling the unit from a web browser (web control)
You can control the unit with the web control screen displayed in a web browser.
Web browser
• You can check the IP address of the unit in “Network” (p.124) in the “Information” menu.
• You can bookmark the unit’s IP address in the browser or create a shortcut link (p.91) to access the
web control screen quickly in the future. However, if you are using a DHCP server, the IP address of
the unit may change each time the unit is turned on.
Web control
• If you have enabled the MAC address filter (p.116), you need to specify the MAC address of your PC
to allow the PC to access the unit. For information on how to check the MAC address of your PC,
refer to its instruction manual.
Web control
• If you are using Windows 8, we recommend you start Internet Explorer in the following way.
PC
Router
The unit
– Select “Desktop” in the Start screen and click the Internet Explorer icon at the bottom left of the
screen.
• By using the application for smartphone/tablet “AV CONTROLLER”, you can control the unit from an
iPhone, iPad, iPod touch or Android devices. Visit the Yamaha website for details.
• To use this function, the unit and your PC must be connected to the same router.
• Some security software installed on your PC may block the access of the unit to your PC. In these
cases, configure the security software appropriately.
• To display the web control screen or turn on the unit from the web control when the unit is in standby
mode, set “Network Standby” (p.91) to “On”.
• We recommend using one of the following web browsers.
– Internet Explorer 9.x, 10.x or 11.x
– Safari 6.x
1
2
Start the web browser.
Enter the IP address of the unit in the address bar of the web browser.
(Example)
PLAYBACK ➤ Controlling the unit from a web browser (web control)
En
89
■ Top menu screen
■ Control screen
3
1
5
1
6
2
3
4
5
7
1 CONTROL
Moves to the control screen for the selected zone.
2 STATUS
Turns on/off the power for each zone or displays the input source and volume set for each zone.
3 SETTINGS
Moves to the settings screen.
4 PARTY MODE
Turns on/off the party mode (p.88).
5 SYSTEM POWER
Turns on/off the power for all zones.
6 MAIN VOLUME
Adjusts the volume or mutes the audio output for the main zone. You can also select the
increments used for volume adjustment.
4
2
6
1 PLAY INFO
Selects an input source or controls playback for the selected zone.
2 TOP MENU
Moves to the top menu screen.
3 SCENE
Selects a scene for the selected zone.
4 POWER
Turns on/off the power for the selected zone.
5 VOLUME
Adjusts the volume or mutes the audio output for the selected zone. You can also select the
increments used for volume adjustment.
6 RELOAD
Reloads the current status of the unit.
7 RELOAD
Reloads the current status of the unit.
• Multi-zone volume adjustment is not available when an external amplifier is used.
PLAYBACK ➤ Controlling the unit from a web browser (web control)
En
90
■ Settings screen
Note
• If the network settings are changed, you may need to restart the browser or regain access to the unit.
• When using the MAC address filter, make sure you specify the MAC addresses of your network
devices correctly. Otherwise, the unit will be inaccessible from your network devices such as PCs and
other external devices.
1
• Do not operate the unit during the recovery process, as this may result in the incorrect recovery of the
settings. When the recovery finishes, click “OK” to set the unit to standby mode.
• The backup does not contain user information (such as user account and password) or unit-specific
information (such as MAC address and IP address).
• Some characters entered with a PC may not appear correctly on the unit.
2
3
1 Rename
Edits the network name (the unit’s name on the network) (p.117) or the name of each zone
(p.118). Click “APPLY” to apply the changes to the unit.
Network
Selects the network connection method (p.116) or configures the network parameters (such as
IP address) (p.116). Click “APPLY” to apply the changes to the unit.
MAC Filter
Sets the MAC address filter (p.116) to limit access to the unit from the network devices. Click
“APPLY” to apply the changes to the unit.
Auto Reload
Enables/disables automatic reloading. When “Auto Reload” is “On” (enabled), the web control
screen reloads the status of the unit every 5 seconds.
Network Standby
Enables/disables the network standby function (p.116).
Backup/Recovery
Creates a backup of the unit’s settings on the PC or restores the settings from the backup.
Firmware Update
Updates the firmware of the unit by using the firmware you have downloaded on the PC.
Follow the on-screen instructions to start the firmware update.
Create Link
Creates a shortcut link to the desired control screen.
Tips
Displays tips for use of the web control.
2 BACK
Moves to the top menu screen.
3 RELOAD
Reloads the current status of the unit.
PLAYBACK ➤ Controlling the unit from a web browser (web control)
En
91
Viewing the current status
Switching information on the front display
Viewing the status information on the TV
1
1
Press INFO.
Each time you press the key, the displayed item changes.
DOCK
TAG
HD
IN OUT 1 OUT 2
PRE AMP PARTY
ZONE ZONE ZONE
2
3
4
SLEEP
HD 3
Info
AudioDecoder
Press DISPLAY.
The following information is displayed on the TV.
Compressed Music Enhancer status
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Item name
Input source/
Party mode
status
Volume/
YPAO
Volume
status
Audio format/
Decoder
Sound
mode
About 3 seconds later, the corresponding information for
the displayed item appears.
DOCK
TAG
HD
DISPLAY
IN OUT 1 OUT 2
PRE AMP PARTY
ZONE ZONE ZONE
2
3
4
SLEEP
HD 3
AV1
ProLogic
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Information
INFO
• Available items vary depending on the selected input source. The displayed
item can also be applied separately to each input source group.
Input source group
Item
AV 1–7
V-AUX
AUDIO 1–4
PHONO
DSP Program (sound mode name), Audio Decoder
(decoder name*)
TUNER
DSP Program (sound mode name),
Audio Decoder (decoder name*)
USB
SERVER
AirPlay
NET RADIO
CINEMA DSP status
2
To close the information display, press DISPLAY.
Song (song title), Artist (artist name),
Album (album name), DSP Program (sound mode
name), Audio Decoder (decoder name*)
* During simple playback of iPod:
DSP Program (sound mode name),
Audio Decoder (decoder name*)
Song (song title), Album (album name), Station
(station name), DSP Program (sound mode name),
Audio Decoder (decoder name*)
* The name of the audio decoder currently activated is displayed. If no audio
decoder is activated, “Decoder Off” appears.
PLAYBACK ➤ Viewing the current status
En
92
Configuring playback settings for different playback sources (Option menu)
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
Option menu items
• Available items vary depending on the selected input source.
• Text in parentheses denotes indicators on the front display.
DOCK
TAG
HD
IN OUT 1 OUT 2
PRE AMP PARTY
ZONE ZONE ZONE
2
3
4
SLEEP
HD 3
Option
ToneControl
• Default settings are underlined.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Front display
Item
Function
Tone Control
(Tone Control)
Adjusts the high-frequency range and low-frequency
range of sounds.
94
Enables/disables YPAO Volume.
94
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the volume
is adjusted.
94
YPAO Volume
(YPAO Vol.)
YPAO Volume
(YPAO Volume) Adaptive DRC
(A.DRC)
Dialogue
(Dialog)
TV screen
2
3
4
Use the cursor keys to select an item and press ENTER.
Page
Dialogue Level
Adjusts the volume of dialogue sounds.
(Dialog Lvl)
95
Dialogue Lift
(Dialog Lift)
95
Adjusts the perceived height of dialogue sounds.
Subwoofer Trim
Fine-adjusts the subwoofer volume.
Subwoofer/Bass (SW.Trim)
(Subwoofer/Bass) Extra Bass
Enables/disables Extra Bass.
(Extra Bass)
95
95
• To return to the previous screen during menu operations, press RETURN.
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer.
95
Use the cursor keys (e/r) to select a setting.
Video Processing
(Video Process.)
Enables/disables the video signal processing
settings configured in the “Setup” menu.
96
Corrects volume differences between input sources.
96
Selects the audio input jack to use when more than
one audio connection is made for one input source.
96
Selects a video to be output with the audio input
source.
96
Switches between stereo and monaural for FM radio
reception.
96
Input Trim
(In.Trim)
To exit from the menu, press OPTION.
Input Settings Audio Select
(Input Settings) (A.Sel)
Video Out
(V.Out)
FM Mode
(FM Mode)
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
93
Item
Function
Page
Shuffle
(Shuffle)
Configures the shuffle setting for the iPod (p.69),
USB storage device (p.72), or media server (p.76).
—
Repeat
(Repeat)
Configures the repeat setting for the iPod (p.69),
USB storage device (p.72), or media server (p.76).
—
■ YPAO Volume (YPAO Volume)
Enables/disables YPAO Volume or Adaptive DRC.
YPAO Volume (YPAO Vol.)
■ Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and
low-frequency levels are automatically adjusted according to the volume so that
you can enjoy natural sounds even at low volume.
Settings
Off (Off)
Disables YPAO Volume.
On (On)
Enables YPAO Volume.
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments
• YPAO Volume works effectively after the measurement results of “Auto Setup” have been already
saved (p.38).
• If you set an extreme value, sounds may not match those from other channels.
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower
volumes or at night.
• You can also adjust the “Tone Control” setting with the front panel controls by pressing TONE/BALANCE
repeatedly to select “Treble” or “Bass”, and PROGRAM to make an adjustment.
Adaptive DRC (A.DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically
adjusted when the volume level is adjusted. When it is set to “On”, it is useful for
listening to playback at a low volume at night.
Settings
Off (Off)
The dynamic range is not automatically adjusted.
On (On)
Automatically adjusts the dynamic range when YPAO Volume is
enabled.
If “On” is selected, the dynamic range becomes narrow at a low volume and wide
at a high volume.
On
Off
Input level
Volume: high
Output level
Output level
Volume: low
On
Off
Input level
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
94
■ Dialogue (Dialog)
■ Subwoofer/Bass (Subwoofer/Bass)
Adjusts the volume or perceive height of dialogue sounds.
Adjust the subwoofer volume or bass sound.
Dialogue Level (Dialog Lvl)
Subwoofer Trim (SW.Trim)
Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard
clearly, you can turn up its volume by increasing this setting.
Setting range
0 to 3
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Extra Bass (Extra Bass)
Dialogue Lift (Dialog Lift)
Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is
coming from below the TV screen, you can raise its perceived height by increasing
this setting.
• This setting is available only when one of the following conditions is met.
Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy
enhanced bass sounds, regardless of the size of the front speakers and the
presence or absence of the subwoofer.
Settings
Off (Off)
Disables Extra Bass.
On (On)
Enables Extra Bass.
– One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when front
presence speakers are used.
– Virtual Presence Speaker (VPS) (p.58) is working.
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
Setting range
0 to 5 (The bigger the value the higher the position)
■ Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer (p.62).
• This setting is applied separately to each input source.
Ideal position
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer
(p.62).
Settings
Off (Off)
Disables Compressed Music Enhancer.
On (On)
Enables Compressed Music Enhancer.
Default
TUNER, USB, (network sources): On (On)
Others: Off (Off)
• Compressed Music Enhancer does not work on signals whose sampling rate is over 48 kHz.
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
95
■ Video Processing (Video Process.)
Video Out (V.Out)
Enables/disables the video signal processing (resolution and aspect ratio) settings
configured in “Processing” (p.113) in the “Setup” menu.
Selects a video to be output with the audio input source.
Settings
Settings
Direct (Direct)
Processing
(Processing)
Off (Off)
Does not output video.
AV 1–7 (AV1–7),
V-AUX (V-AUX)
Outputs video input through the corresponding video input jacks.
Disables the video signal processing.
Enables the video signal processing.
Default
USB: V-AUX (V-AUX)
Others: Off (Off)
■ Input Settings (Input Settings)
Configures the input settings.
■ FM Mode (FM Mode)
Switches between stereo and monaural for FM radio reception.
• This setting is applied separately to each input source.
Settings
Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Stereo (Stereo)
Receives FM radio in stereo sounds.
Mono (Mono)
Receives FM radio in monaural sounds.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Audio Select (A.Sel)
Selects the audio input jack to use when more than one audio connection is made
for one input source.
Settings
Auto (Auto)
Automatically selects the audio input jack in the following priority order.
1. HDMI input
2. Digital input (COAXIAL or OPTICAL)
3. Analog input (AUDIO)
HDMI (HDMI)
Always selects HDMI input. No sounds are produced when no signals
are input through the HDMI jack.
Coax/Opt
(Coax/Opt)
Always selects digital input (COAXIAL or OPTICAL). No sounds are
produced when no signals are input through the COAXIAL or
OPTICAL jack.
Analog (Analog)
Always selects analog input (AUDIO). No sounds are produced when
no signals are input through the AUDIO jacks.
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
96
CONFIGURATIONS
Configuring input sources (Input menu)
4
Use the cursor keys (q/w) to select an item and press ENTER.
You can change the input source settings using the TV screen.
1
2
Press ON SCREEN.
Use the cursor keys to select “Input” and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
5
6
Use the cursor keys (e/r) to select an input source to be configured
and press the cursor key (q).
Use the cursor keys to select a setting and press ENTER.
To exit from the menu, press ON SCREEN.
Input menu items
• Available items vary depending on the selected input source.
• Default settings are underlined.
The input source of the unit also changes.
• You can still switch the input source by using cursor keys (e/r) after Step 3.
Item
Function
Rename/Icon Select
Changes the input source name and icon.
98
Decoder Mode
Sets the format of digital audio playback to DTS.
98
Volume Interlock
Enables/disables volume controls from iTunes/iPod via
AirPlay.
98
DMC Control
Selects whether to allow a DLNA-compatible Digital Media
Controller (DMC) to control playback.
98
CONFIGURATIONS
Page
➤ Configuring input sources (Input menu)
En
97
■ Rename/Icon Select
■ Decoder Mode
Changes the input source name and icon displayed on the front display or TV screen.
Sets the format of digital audio playback to “DTS”.
Input sources
AV 1–7, V-AUX, AUDIO 1–4, PHONO, USB, MULTI CH
■ Setup procedure
1
Use the cursor keys (e/r) to select a template and press the cursor key (w).
For example, if the unit does not detect DTS audio and outputs noise, set “Decoder
Mode” to “DTS”.
Input sources
AV 1–7, V-AUX, AUDIO 1–4 (available only when any audio digital input jack is assigned)
Settings
Auto
Automatically selects an audio format to match the input audio signal.
DTS
Selects DTS only. (Other audio signals are not reproduced.)
■ Volume Interlock
Enables/disables volume controls from iTunes/iPod via AirPlay.
Input sources
AirPlay
Settings
2
3
4
• You cannot change the template or icon for “USB” when an iPod is connected.
Off
Disables volume controls from iTunes/iPod.
Use the cursor keys (e/r) to select an icon and press the cursor key (w).
Limited
Enables volume controls from iTunes/iPod within the limited range
(-80 dB to 0 dB and mute).
Full
Enables volume controls from iTunes/iPod in the full range (-80 dB to
+16.5 dB and mute).
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.
■ DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Input source
SERVER
Settings
Disable
Does not allow DMCs to control playback.
Enable
Allows DMCs to control playback.
• To clear the entry, select “CLEAR”.
5
Use the cursor keys to select “OK” and press ENTER.
• A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media
Player 12) on the same network.
• To restore the default setting, select “RESET”.
6
To exit from the menu, press ON SCREEN.
CONFIGURATIONS
➤ Configuring input sources (Input menu)
En
98
Configuring the SCENE function (Scene menu)
4
Use the cursor keys (q/w) to select an item and press ENTER.
5
6
Use the cursor keys and ENTER to change the setting.
You can change the settings of the SCENE function (p.55) using the TV screen.
1
2
3
Press ON SCREEN.
Use the cursor keys to select “Scene” and press ENTER.
To exit from the menu, press ON SCREEN.
Scene menu items
Use the cursor keys (e/r) to select a scene to be configured and
press the cursor key (q).
Item
Function
Save
Registers the current settings in the selected scene.
Page
99
Load
Loads the settings registered for the selected scene. You can
also configure the SCENE link playback setting, select items
to be included as the scene assignments, or view the settings
currently assigned to the selected scene.
100
Rename/Icon Select
Changes the scene name and icon.
101
Reset
Restores the default settings for the selected scene.
101
■ Save
• You can still switch the scene by using cursor keys (e/r) after Step 3.
Registers the unit’s current settings (such as input source and sound program) in the
selected scene.
• If you have changed the input assignment for a scene, you also need to change the external device
assigned to the corresponding SCENE key (p.56).
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu)
En
99
■ Load
Detail
Loads the settings registered for the selected scene.
Select “DETAIL” to configure the SCENE link playback setting or view the scene
assignments.
Device Control
Recalls a selected scene and starts its playback on an external device connected
to the unit via HDMI. (SCENE link playback)
Selects items to be included as the scene assignments. You can also view the
settings currently assigned to the selected scene.
To include items as the scene assignments, use the cursor keys to select an item
and press ENTER to check the box (or uncheck the box to exclude).
For example, if you often adjust the volume while watching TV but listen to radio
with low volume at night, exclude “Volume” from the assignments for SCENE2 (TV)
and include “Volume” in the assignments for SCENE4 (RADIO).
Settings
Off
Disables the SCENE link playback function.
HDMI Control
Enables SCENE link playback using HDMI Control signals. Select this
if an HDMI Control-compatible device (such as a BD/DVD player) is
connected to the unit via HDMI. It also turns on the TV if it supports
HDMI Control.
Check or uncheck
Default
SCENE1 (BD/DVD), SCENE2 (TV): HDMI Control
SCENE3 (NET), SCENE4 (RADIO), SCENE5–12: Off
Choices
• To control playback of an HDMI Control-compatible device by SCENE link playback, you need to set
“HDMI Control” in the “Setup” menu to “On” and perform the HDMI Control link setup (p.144).
Input
Input (p.54), Audio Select (p.96)
HDMI Output
HDMI Output (p.54)
Mode
Sound Program (p.57), Pure Direct Mode (p.112), Enhancer (p.62)
Sound
Tone Control (p.94), YPAO Volume (p.94), Adaptive DRC (p.94),
Extra Bass (p.95)
Surround
CINEMA DSP 3D Mode (p.112), Dialogue Lift (p.95), Dialogue Level
(p.95), Subwoofer Trim (p.95), Extended Surround (p.113)
Video
Video Mode (p.113)
Volume
Master Volume (p.54)
Lipsync
Lipsync (p.111), Delay (p.112)
Speaker Setup
Setting Pattern (p.108), PEQ Select (p.110)
Default
Input, HDMI Output, Mode: selected
Sound, Surround, Video, Volume, Lipsync, Speaker Setup: not selected
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu)
En
100
■ Rename/Icon Select
Changes the scene name and icon displayed on the front display or TV screen.
■ Setup procedure
1
2
3
Use the cursor keys (e/r) to select an icon and press the cursor key (w).
Configuring sound programs/surround
decoders (Sound Program menu)
You can change the settings of the sound programs and surround decoders using the
TV screen.
1
2
Press ON SCREEN.
3
Use the cursor keys (e/r) to select a sound program to be
configured and press the cursor key (q).
Use the cursor keys to select “Sound Program” and press ENTER.
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
• To clear the entry, select “CLEAR”.
4
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
5
• You can still switch the sound program by using cursor keys (e/r) after Step 3.
To exit from the menu, press ON SCREEN.
■ Reset
Restores the default settings (p.55) for the selected scene.
CONFIGURATIONS ➤
Configuring sound programs/surround decoders (Sound Program menu)
En
101
4
Use the cursor keys (q/w) to select an item and press ENTER.
Sound Program menu items
• Available items vary depending on the selected sound program or surround decoder.
• Default settings are underlined.
■ Settings for sound programs
• To return to the previous screen during menu operations, press RETURN.
Item
Function
Decode Type
bPro Logic*, bPLIIx Movie
(bPLII Movie), bPLIIx
Music* (bPLII Music*),
Selects a surround decoder to be used bPLIIx Game* (bPLII
in combination with the selected sound Game*), Neo:6 Cinema,
Neo:6 Music*
program.
(* Available only when
“SURROUND DECODER” is
selected)
DSP Level
Adjusts the sound field effect level.
-6 dB to 0 dB to +3 dB
Higher to enhance the sound
field effect, and lower to
reduce it.
Initial Delay
Adjusts the delay between the direct
sound and presence sound field
generation.
1 ms to 99 ms
Higher to enhance the delay
effect, and lower to reduce it.
Surround Initial Delay
Adjusts the delay between the direct
sound and surround sound field
generation.
• To restore the default settings for the selected sound program, select “Reset”.
5
6
Use the cursor keys to select a setting and press ENTER.
To exit from the menu, press ON SCREEN.
Surround Back Initial
Delay
Adjusts the delay between the direct
sound and surround back sound field
generation.
Room Size
Adjusts the broadening effect of the
presence sound field.
Surround Room Size
Adjusts the broadening effect of the
surround sound field.
Surround Back Room
Size
Adjusts the broadening effect of the
surround back sound field.
CONFIGURATIONS ➤
Settings
1 ms to 49 ms
Higher to enhance the delay
effect, and lower to reduce it.
0.1 to 2.0
Higher to enhance the
broadening effect, and lower
to reduce it.
Configuring sound programs/surround decoders (Sound Program menu)
En
102
Item
Function
Liveness
Adjusts the loss of the presence sound
field.
The following items are available when you select “2ch Stereo” or “7ch Stereo”.
Settings
Sound program
0 to 10
Higher to enhance the
reflectivity, and lower to
reduce it.
Surround Liveness
Adjusts the loss of the surround sound
field.
Surround Back
Liveness
Adjusts the loss of the surround back
sound field.
Reverb Time
Adjust the decay time of the rear
reverberant sound.
1.0 s to 5.0 s
Higher to enrich the
reverberant sound and lower
to have clear sound.
Adjusts the delay between the direct
sound and reverberant sound
generation.
0 ms to 250 ms
Higher to enhance the delay
effect, and lower to reduce it.
Adjusts the volume of the reverberant
sound.
0% to 100%
Higher to strengthen the
reverberant sound, and lower
to weaken it.
Reverb Delay
Reverb Level
2ch Stereo
Item
Function
Settings
Direct
Selects whether to
automatically bypass the
DSP circuit when an
analog audio source is
played back.
Auto, Off
Level
Adjusts the entire volume. -5 to 0 to +5
Front / Rear Balance
Adjusts the front and rear
volume balance.
-5 to 0 to +5
Higher to enhance the front
side, and lower to enhance
the rear side.
Left / Right Balance
Adjusts the left and right
volume balance.
-5 to 0 to +5
Higher to enhance the right
side, and lower to enhance
the left side.
Height Balance
Adjust the height volume
balance using the front
presence speakers.
0 to 5 to 10
Higher to enhance the
upside, and lower to
enhance the downside. (The
front presence speakers do
not produce sounds when
“Height Balance” is set to
“0”.)
Monaural Mix
Enables/disables
monaural sound output.
Off, On
7ch Stereo
• Available items in “7ch Stereo” vary depending on the speaker system being used.
CONFIGURATIONS ➤
Configuring sound programs/surround decoders (Sound Program menu)
En
103
■ Settings for decoders
The following items are available when you set “Decode Type” of “SURROUND
DECODER” to “bPLIIx Music” (bPLII Music) or “Neo:6 Music”.
Decode Type
Item
Function
Settings
Panorama
Adjusts the broadening
effect of the front sound
field.
Off, On
Select “On” to wrap front left/right
channel sounds around the field
and generate a spacious sound
field in combination with the
surround sound field.
Center Width
Adjusts the broadening
effect of the center
sound field.
0 to 3 to 7
Higher to enhance the broadening
effect, and lower to reduce it
(closer to center).
Dimension
Adjusts the difference in
level between the front
and surround sound
fields.
-3 to 0 to +3
Higher to strengthen the front
sound field and lower to strengthen
the surround sound field.
Center Image
Adjusts the center
orientation level
(broadening effect) of
the front sound field.
0.0 to 0.3 to 1.0
Higher to strengthen the center
orientation level (less broadening
effect) and lower to weaken (more
broadening effect).
bPLIIx Music
(bPLII Music)
Neo:6 Music
CONFIGURATIONS ➤
Configuring sound programs/surround decoders (Sound Program menu)
En
104
Configuring various functions (Setup menu)
4
Use the cursor keys (q/w) to select an item and press ENTER.
You can configure the unit’s various function with the menu displayed on the TV screen.
1
2
Press ON SCREEN.
Use the cursor keys to select “Setup” and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
5
6
Use the cursor keys to select a setting and press ENTER.
To exit from the menu, press ON SCREEN.
Use the cursor keys (e/r) to select a menu.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
105
Setup menu items
Menu
Item
Function
Automatically optimizes the speaker settings (YPAO).
38
Setting Pattern
Registers two speaker setting patterns and switches between them.
108
Setting Data Copy
Copies the “Setting Pattern” parameters in the specified direction.
108
Power Amp Assign
Selects a speaker system.
108
Front
Selects the size of the front speakers.
109
Center
Selects whether or not a center speaker is connected and its size.
109
Surround
Selects whether or not surround speakers are connected and their size.
109
Surround Back
Selects whether or not surround back speakers are connected and their size.
109
Front Presence
Selects whether or not front presence speakers are connected.
109
Subwoofer
Selects whether or not a subwoofer is connected and its phase.
110
Layout
Selects a surround speaker layout when surround speakers are used.
110
Bass Cross Over
Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”.
110
Auto Setup
Speaker
Page
Configuration
Manual Setup
Lipsync
Distance
Sets the distance between each speaker and listening position.
110
Level
Adjusts the volume of each speaker.
110
Parametric EQ
Adjusts the tone with an equalizer.
110
Test Tone
Enables/disables the test tone output.
111
Delay Enable
Enables/disables the Lipsync adjustment for each input source.
111
Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
111
Adjusts the delay between video and audio output manually.
112
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
112
Max Volume
Sets the maximum volume to prevent excessive loudness.
112
Initial Volume
Sets the initial volume for when this receiver is turned on.
112
Pure Direct Mode
Selects whether to output video signals during the Pure Direct mode.
112
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level.
112
Adjustment
Sound
Video
CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D.
112
Extended Surround
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used.
113
Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
113
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
106
Menu
Item
HDMI Control
Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).
114
HDMI
Audio Output
Selects a device to output audio.
115
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
115
Network Connection
Selects the network connection method.
116
IP Address
Configures the network parameters (such as IP address).
116
Network Standby
Selects whether to enable/disable the function that turns on the unit from other network devices.
116
MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
116
Network Name
Edits the network name (the unit’s name on the network) displayed on other network devices.
117
Network
Main Zone Set
Function
Page
Zone Rename
Changes the zone name (for main zone) displayed on the front display or TV screen.
118
Volume
Enables/disables volume adjustments for Zone2 output.
118
Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness in the second zone.
118
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
118
Mono
Switches between stereo and monaural for Zone2 output.
119
Zone Scene Rename
Changes the scene names (for Zone2) displayed on the front display.
119
Zone Rename
Zone2 Set
Multi Zone
Changes the zone name (for Zone2) displayed on the front display or TV screen.
119
Monitor Out Assign
Select the zone for which the MONITOR OUT/ZONE OUT jacks are used.
119
HDMI OUT2 Assign
Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used.
119
Party Mode Set
Enables/disables switching to the party mode.
119
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source.
120
Dimmer (Front Display)
Adjusts the brightness of the front display.
120
Short Message
Selects whether to display short messages on the TV screen when the unit is operated.
120
Wallpaper
Selects the image to be used as wallpaper on the TV.
120
Input Assignment
Display Set
Function
Trigger Output1 Trigger Mode
Trigger Output2 Target Zone
Specifies the condition for the TRIGGER OUT jack to function.
121
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
121
DC OUT
Selects how to supply power through the DC OUT jack.
121
Memory Guard
Prevents accidental changes to the settings.
122
Auto Power Standby
Sets the amount of time for the auto-standby function.
122
ECO Mode
Enables/disables the eco mode (power saving mode).
123
Select an on-screen menu language.
123
Power Mode
ECO
Language
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
107
Speaker (Manual Setup)
Configures the speaker settings manually.
■ Setting Data Copy
Copies the “Setting Pattern” parameters in the specified direction.
Choices
Pattern1 > 2
Copies the “Pattern1” parameters to “Pattern2”.
Pattern2 > 1
Copies the “Pattern2” parameters to “Pattern1”.
• Some speaker settings are not available depending on the selected “Power Amp Assign” setting.
• Default settings are underlined.
■ Power Amp Assign
Selects a speaker system.
The unit has 7 built-in amplifiers. You can connect 2 to 9 speakers and up to 2
subwoofers (with built-in amplifier) to create the favorite acoustic space in your room.
You can also apply bi-amp connections, channel expansion (using an external power
amplifier) or multi-zone configurations to enhance your system.
Settings
■ Setting Pattern
Basic
Select this option when you use the basic speaker configuration (up to
7-channel plus front presence speakers) (p.16).
Registers two speaker setting patterns and switches between them.
7ch +1ZONE
Select this option when you use 7-channel speakers in the main zone
and Zone2 speakers (p.22).
When you configure the following speaker settings, the settings will be memorized in
the selected pattern.
5ch BI-AMP
Select this option when you use 5-channel speakers (including
bi-amp front speakers) (p.21).
5ch BI-AMP +SB
Select this option when you use 5-channel speakers (including
bi-amp front speakers) plus surround back channel expansion using
an external amplifier (p.22).
• Measurement results (Auto Setup)
• Power Amp Assign
• Configuration
• Distance
■ Configuration
• Level
Configures the output characteristics of the speakers.
• Parametric EQ
Settings
Pattern1, Pattern2
• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm
(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
• The setting pattern currently selected is shown at the top of the “Manual Setup” screen.
• This function is useful when you want to save certain settings according to the varying conditions of your
listening environment. For example, if you want to switch the settings when curtains are open or closed,
you can save the settings suited for each condition and switch between them.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
108
Front
Surround Back
Selects the size of the front speakers.
Selects whether or not surround back speakers are connected and their sizes.
Settings
Settings
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
Large x1
Select this option when one large speaker is connected.
The surround back speaker will produce all of the surround back
channel frequency components.
Small
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Bass Cross Over”).
Large x2
Select this option when two large speakers are connected.
The surround back speakers will produce all of the surround back
channel frequency components.
Small x1
Select this option when one small speaker is connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Bass Cross Over”).
Small x2
Select this option when two small speakers are connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Bass Cross Over”).
None
Select this option when no surround back speakers are connected.
The surround speakers will produce surround back channel audio.
• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
Center
Selects whether or not a center speaker is connected and its size.
Settings
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
Small
Select this option for small speakers.
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in “Bass Cross Over”).
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
• This setting is not available when “Surround" is set to "None", or when “Layout (Surround)" is set to
"Front".
Front Presence
Selects whether or not front presence speakers are connected.
Settings
Surround
Selects whether or not surround speakers are connected and their sizes.
Use
Select this option when front presence speakers are connected.
None
Select this option when no front presence speakers are connected.
Settings
Large
Select this option for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
Small
Select this option for small speakers.
The subwoofer or front speakers will produce surround channel
low-frequency components (configurable in “Bass Cross Over”).
None
Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
109
■ Distance
Subwoofer
Selects whether or not a subwoofer is connected and its phase.
Settings
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Normal
Select this option when a subwoofer is connected (phase not
reversed). The subwoofer will produce LFE (low-frequency effect)
channel audio and low-frequency components from other channels.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
Reverse
Select this option when a subwoofer is connected (phase reversed).
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Setting range
0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
Use
None
Select this option when no subwoofer is connected. The front
speakers will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
■ Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
• When the bass sound is lacking or unclear, switch the subwoofer phase.
Setting range
-10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)
Layout
Selects a surround speaker layout when surround speakers are used.
■ Parametric EQ
Choices
Surround
Adjusts the tone with an equalizer.
Settings
Settings
Rear
Select this option when surround speakers are placed on the rear side
of the room.
Front
Select this option when surround speakers are placed on the front
side of the room. Virtual CINEMA FRONT (p.60) works in this case.
• This setting is not available when “Surround” is set to “None”.
Bass Cross Over
Sets the lower limit of the low-frequency components that can be output from a
speaker whose size is set to “Small”. A frequency sound lower than the specified
value will be produced from the subwoofer or front speakers.
Settings
40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
Manual
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
YPAO:Flat
Adjusts individual speakers to achieve the same characteristics.
YPAO:Front
Adjusts individual speakers to achieve the same characteristics as
the front speakers.
YPAO:Natural
Adjusts all speakers to achieve a natural sound.
Through
Does not use the equalizer.
• “YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto
Setup” have already been saved (p.38). Press ENTER again to view the measurement results.
■ Manual equalizer adjustment
1
2
3
Set “Parametric EQ” to “Manual” and press ENTER.
Press ENTER again to enter the edit screen.
Use the cursor keys to select a speaker and press ENTER.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
110
Sound
• To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.
• To copy the parametric equalizer values acquired with “Auto Setup” (p.38) to the “Manual” fields for
fine adjustment, select “PEQ Data Copy” and then an equalizer type.
4
Configures the audio output settings.
Use the cursor keys (e/r) to select a center frequency from the 7 preset bands
and the cursor keys (q/w) to adjust the gain.
■ Lipsync
Adjusts the delay between video and audio by holding up the audio output.
Setting range
Gain: -20.0 dB to +6.0 dB
5
To fine-adjust the center frequency or Q factor (bandwidth), press ENTER
repeatedly to select an item.
Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected
band and the cursor keys (q/w) to adjust the gain.
Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and
the cursor keys (q/w) to adjust the gain.
Setting range
Center frequency: 31.3 Hz to 16.0 kHz
Q factor: 0.500 to 10.080
6
To exit from the menu, press ON SCREEN.
Delay Enable
Enables/disables the Lipsync adjustment for each input source.
Choices
AV 1–7, V-AUX, AUDIO 1–4
Settings
Disable
Disable the Lipsync adjustment for the selected input source.
Enable
Enables the Lipsync adjustment for the selected input source.
Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
Setting range
■ Test Tone
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Auto
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in
“Adjustment”.
Manual
Select this option when you want to adjust the delay between video
and audio output manually.
Adjust the audio output timing in “Adjustment”.
Settings
Off
Does not output test tones.
On
Outputs test tones automatically when you adjust the speaker balance
or equalizer.
• Even if “Auto/Manual Select” is set to “Auto”, the automatic adjustment does not work depending on
the TV connected to the unit. In this case, adjust the delay manually in “Adjustment”.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
111
■ Initial Volume
Adjustment
Adjusts the delay between video and audio output manually when “Auto/Manual
Select” is set to “Manual”. You can fine-adjust the audio output timing when
“Auto/Manual Select” is set to “Auto”.
Sets the initial volume when the receiver is turned on.
Settings
Off
Sets the level to the volume level of the unit when it last entered
standby mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max
Volume”.)
■ Pure Direct Mode
Selects whether to output video signals during the Pure Direct mode (p.62).
Setting range
0 ms to 500 ms (1 ms increments)
Settings
Auto
Automatically outputs video signals when any videos are input from
the selected input source or an input source that can be operated with
the on-screen display is selected. When no video signals are input,
the wall paper is displayed.
Video Off
Does not output video signals including the wall paper.
• “Offset” shows the difference between automatic adjustment and fine adjustment.
■ Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
■ Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level.
Settings
Maximum
Produces audio without adjusting the dynamic range.
Standard
Optimizes the dynamic range for regular home use.
Minimum/Auto
Sets the dynamic range for clear sound even at night or at low
volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
■ Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Off
Does not adjust the effect level automatically.
On
Adjusts the effect level automatically according to the YPAO
measurement results and the volume level.
■ CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D (p.58). If this function is set to “On”, CINEMA DSP
3D functions with the selected sound programs (except 2ch Stereo and 7ch Stereo).
Settings
Off
Disables CINEMA DSP 3D.
On
Enables CINEMA DSP 3D.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
112
■ Extended Surround
Video
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers
are used.
Configures the video output settings.
Settings
Auto
Automatically selects the most suitable decoder if signals that contain
surround back channel signals are input, and reproduces the signals
in 6.1- or 7.1-channel. If two surround back speakers are connected,
the unit reproduces the 5.1-channel signals in 7.1-channel.
bPLIIx Movie
Always reproduces signals in 7.1-channel using the Dolby Pro Logic
IIx Movie decoder. This setting is available only when two surround
back speakers are connected.
bPLIIx Music
Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
Logic IIx Music decoder. This setting is available only when one or two
surround back speakers are connected.
EX/ES
Automatically selects the Dolby EX or DTS-ES decoder, and
reproduces signals in 6.1- or 7.1-channel.
Off
Always reproduces signals in their original channels. (Even when
DTS-ES or Dolby Digital Surround EX signal is input, the unit
reproduces the signal in 5.1-channel.)
■ Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
Settings
Direct
Disables the video signal processing.
Processing
Enables the video signal processing.
Select a resolution and an aspect ratio in “Resolution” and “Aspect”.
• Some early Dolby Digital Surround EX or DTS-ES sources do not contain a flag for reproducing surround
back channel. We recommend you set “Extended Surround” to “bPLIIx Movie” or “EX/ES” when playing
back those sources.
• When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to
reduce video output delay.
• When “Video Mode” is set to “Processing” and the resolution is being converted, short messages are not
displayed on the TV screen.
Resolution
Selects a resolution to output HDMI video signals when “Video Mode” is set to
“Processing”.
Settings
Through
Does not convert the resolution.
Auto
Selects a resolution automatically in accordance with TV resolution.
480p/576p, 720p,
1080i, 1080p, 4K
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)
• If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” (p.127) in
the “ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be
displayed on your TV normally.)
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
113
Aspect
HDMI
Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to
“Processing”.
Configures the HDMI settings.
Settings
Through
Does not convert the aspect ratio.
16:9 Normal
Outputs 4:3 video signals to a 16:9 TV with black bands on either side
of the screen.
• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i,
1080p, or 2160p (4K) signals.
■ HDMI Control
Enables/disables HDMI Control (p.144).
Settings
Off
Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “ARC” and “Standby
Sync”.
• To use HDMI control, you need to perform the HDMI Control link setup (p.144) after connecting HDMI
Control-compatible devices.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.
Settings
AUDIO 1–4
Default
AUDIO 1
• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for
connecting an external device because the input will be used for TV audio input.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
114
ARC
HDMI OUT1, HDMI OUT2
Enables/disables ARC (p.146) when “HDMI Control” is set to “On”.
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or
HDMI OUT 2 jack.
Settings
Off
Disables ARC.
On
Enables ARC.
• You do not need to change this setting normally. In case noises are produced from the speakers
connected to the unit because TV audio signals input to the unit via ARC are not supported by the
unit, set “ARC” to “Off” and use the TV’s speakers.
Settings
Off
Disables the audio output from the TV.
On
Enables the audio output from the TV.
• The HDMI OUT 1–2 jacks output 2-channel audio signals when the unit is turned on.
Standby Sync
■ Standby Through
Select whether to use HDMI control to link the standby behavior of the TV and the
unit when “HDMI Control” is set to “On”.
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to “On”, you can use the input selection
keys (AV 1–7 and V-AUX) to select an HDMI input even when the unit is in standby
mode (the standby indicator on the unit blinks).
Settings
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Auto
Sets the unit to standby mode when the TV is turned off only when the
unit is receiving TV audio or HDMI signals.
Settings
Off
Does not output videos/audio to the TV.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
■ Audio Output
Selects a device to output audio.
• This setting is available only when “HDMI Control” is set to “Off”.
• The “Amp” and “HDMI OUT1” settings are available only when “HDMI Control” is set to “Off”.
• The “HDMI OUT2” setting is available only when “HDMI OUT2 Assign” (p.119) is set to “Main”.
Amp
Enables/disables the audio output from the speakers and headphones connected
to the unit.
Settings
Off
Disables the audio output from the speakers and headphones.
On
Enables the audio output from the speakers and headphones.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
115
Network
2
Configures the network settings.
IP Address
Specifies an IP address.
Subnet Mask
Specifies a subnet mask.
Default Gateway
Specifies the IP address of the default gateway.
DNS Server (P)
Specifies the IP address of the primary DNS server.
DNS Server (S)
Specifies the IP address of the secondary DNS server.
■ Network Connection
Selects the network connection method.
Use the cursor keys (q/w) to select a parameter type and press ENTER.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
4
5
6
7
To confirm the setting, press ENTER.
To configure another network parameter, repeat steps 2 to 4.
To save the changes, use the cursor keys to select “OK” and press ENTER.
To exit from the menu, press ON SCREEN.
Settings
Wired
Select this option when you want to connect the unit to a network with
a commercially-available network cable (p.34)
Wireless (Wi-Fi)
Select this option when you want to connect the unit to a network via
the wireless router (access point). For details on settings, see
“Connecting the unit to a wireless network” (p.47).
Wireless Direct
Select this option when you want to connect a mobile device to the
unit directly. For details on settings, see “Connecting a mobile device
to the unit directly (Wireless Direct)” (p.52).
■ IP Address
Configures the network parameters (such as IP address).
DHCP
■ Network Standby
Selects whether the unit can be turned on from other network devices (network
standby).
Settings
Off
Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
■ MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
Filter
Select whether to use a DHCP server.
Enables/disables the MAC address filter.
Settings
Settings
Off
Does not use a DHCP server. Configure the network parameters
manually. For details, see “Manual network settings”.
Off
Disables the MAC address filter.
On
Uses a DHCP server to automatically obtain the unit’s network
parameters (such as IP address).
On
Enables the MAC address filter. In “MAC Address 1–10”, specify the
MAC addresses of the network devices that will be permitted access
to the unit.
■ Manual network settings
1
Set “DHCP” to “Off”.
• AirPlay (p.80) and DMC (p.98) operations are not subject to the MAC address filter.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
116
MAC Address 1–10
Specifies the MAC addresses (up to 10) of the network devices that will be
permitted access to the unit when “Filter” is set to “On”.
• To restore the default setting, select “RESET”.
4
To exit from the menu, press ON SCREEN.
■ Procedure
1
Use the cursor keys (q/w) to select “MAC Address 1–5” or “MAC Address
6–10” and press ENTER.
2
Use the cursor keys (q/w) to select an MAC address number and press
ENTER.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
4
5
6
To confirm the setting, press ENTER.
To save the changes, use the cursor keys to select “OK” and press ENTER.
To exit from the menu, press ON SCREEN.
■ Network Name
Edits the network name (the unit’s name on the network) displayed on other network
devices.
■ Procedure
1
2
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
• To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
117
Multi Zone
Configures the multi zone settings.
4
To exit from the menu, press ON SCREEN.
■ Zone2 Set
Configures the Zone2 settings.
Volume
Enables/disables volume adjustments for Zone2 output.
If you have connected an external amplifier with volume control to the unit, disable
volume adjustments for Zone2.
Settings
■ Main Zone Set
Fixed
Disables volume adjustments for Zone2 output.
Variable
Enables volume adjustments for Zone2 output.
Configures the main zone setting.
Zone Rename
Changes the zone name (for main zone) displayed on the front display or TV
screen.
• This setting is not available when “Power Amp Assign” (p.108) is set to “7ch +1ZONE”.
Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness.
■ Procedure
1
2
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
• This setting is available only when “Volume” is set to “Variable”.
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
Settings
Off
Sets the level at the volume level of the unit when it last entered standby
mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max Volume”.)
• To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
• This setting is available only when “Volume” is set to “Variable”.
• To restore the default setting, select “RESET”.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
118
Mono
■ Monitor Out Assign
Switches between stereo and monaural for Zone2 output.
Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VIDEO and
VIDEO) jacks are used.
Settings
Off
Produces stereo sounds in Zone2.
On
Produces monaural sounds in Zone2.
Zone Scene Rename
Changes the scene names (for Zone2) displayed on the front display.
■ Procedure
1
2
3
Use the cursor keys to select a scene to be renamed and press ENTER.
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
Settings
Main, Zone2
• To watch videos played back on a video device on the Zone2 video monitor, you need to connect the video
monitor to the unit in the same way as the video device. For example, if you want to watch videos input from
the DVD player via a component video cable, connect the video monitor to the COMPONENT VIDEO jacks
with a component video cable.
■ HDMI OUT2 Assign
Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used.
Settings
Main, Zone2
• For details on video/audio signals that can be output to Zone2, see “Multi-zone output” (p.144).
■ Party Mode Set
Enables/disables switching to the party mode (p.88).
Choice
Target: Zone2
Settings
• To clear the entry, select “CLEAR”.
4
Disable
Disables switching to the party mode.
Enable
Enables switching to the party mode. You can turn on/off the party
mode by pressing PARTY on the remote control.
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
5
To exit from the menu, press ON SCREEN.
Zone Rename
Changes the zone name (for Zone2) displayed on the front display or TV screen.
You can change the zone name in the same manner as “Zone Rename” in “Main
Zone Set” (p.118).
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
119
Function
3
To exit from the menu, press ON SCREEN.
Configures the functions that make the unit easier to use.
• You cannot assign both COAXIAL and OPTICAL jacks to the same input source.
■ Display Set
Configures the settings related to the front display and TV screen display.
Dimmer (Front Display)
Adjusts the brightness of the front display.
■ Input Assignment
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input
source.
■ Procedure
Example: assigning the OPTICAL (e) jack to the input source “AV 2”
1
Use the cursor keys to select the cell at the intersection of “AV 2” and “Optical”,
and press ENTER.
Setting range
-4 to 0 (higher to brighten)
• The front display may become dark when “ECO Mode” (p.123) is set to “On”.
Short Message
Selects whether to display short messages on the TV screen when the unit is
operated (such as input selection and volume adjustment).
Settings
On
Displays short messages on the TV screen.
Off
Does not display short messages on the TV screen.
Wallpaper
Selects the image to be used as wallpaper on the TV.
Settings
2
Use the cursor keys to select “e” and press ENTER.
Picture1, Picture2,
Picture3
Displays the selected image on the TV screen when there is no video
signal.
Gray
Displays a gray background on the TV screen when there is no video
signal.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
120
■ Trigger Output1, Trigger Output2
Target Zone
Sets the TRIGGER OUT 1–2 jacks to function in sync with the power status of each zone
or input switching.
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
Main
When “Trigger Mode” is set to “Power”, electronic signal transmission
is synchronized with the power status of the main zone.
When “Trigger Mode” is set to “Source”, electronic signal transmission
is synchronized with the input switching in the main zone.
Settings
Power
The TRIGGER OUT jack functions in sync with the power status of the
zone specified with “Target Zone”.
Zone2
Source
The TRIGGER OUT jack functions in sync with the input switching in
the zone specified with “Target Zone”.
An electronic signal is transmitted according to the setting made in
“Source.”
When “Trigger Mode” is set to “Power”, electronic signal transmission
is synchronized with the power status of Zone2.
When “Trigger Mode” is set to “Source”, electronic signal transmission
is synchronized with the input switching in Zone2.
All
When “Trigger Mode” is set to “Power”, electronic signal transmission
is synchronized with the power status of the main zone or Zone2.
When “Trigger Mode” is set to “Source”, electronic signal transmission
is synchronized with the input switching in the main zone or Zone2.
Manual
Select this to manually switch the output level for electronic signal
transmission with “Manual”.
Source
■ DC OUT
Specifies the output level of the electronic signal transmitted with each input,
switching when “Trigger Mode” is set to “Source”.
Configures the DC OUT jack setting.
Choices
AV 1–7, V-AUX, AUDIO 1–4, PHONO, TUNER, (network sources), USB, MULTI CH
Settings
Low
Stops the electronic signal transmission when you switch to the input
source specified in this option.
High
Transmits the electronic signal when you switch to the input source
specified in this option.
Manual
Power Mode
Selects how to supply power to the Yamaha AV accessory connected to the DC
OUT jack.
Settings
Continuous
Supplies power through the DC OUT jack continuously regardless of
the power state (on/standby) of the unit.
Main Zone Power
Sync.
Supplies power through the DC OUT jack only when the main zone is
turned on.
(This setting may not work properly on some accessories.)
Switches the output level for electronic signal transmission manually when “Trigger
Mode” is set to “Manual”. This setting can also be used to confirm proper function
of the external device connected via the TRIGGER OUT jack.
Choices
Low
Stops the electronic signal transmission.
High
Transmits the electronic signal.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
121
■ Memory Guard
ECO
Prevents accidental changes to the settings.
Configures the power supply settings.
Settings
Off
Does not protect the settings.
On
Protects the settings until “Off” is selected.
• When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.
Icon
■ Auto Power Standby
Sets the amount of time for the auto-standby function. If you do not operate the unit or if
no input signals are detected for the specified time, the unit will automatically go into
standby mode.
Settings
Off
Does not set the unit to standby mode automatically.
20 Minutes
Sets the unit to standby mode when you have not operated the unit
and no input signals are detected (or the unit is muted) for 20 minutes.
2 Hours, 4 Hours,
8 Hours, 12 Hours
Sets the unit to standby mode when you have not operated the unit for
the specified time. For example, when “2 Hours” is selected, the unit
will switch to standby mode if you do not operate it for 2 hours.
• Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the
front display.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
122
■ ECO Mode
Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit’s power consumption.
Settings
Viewing information about the unit
(Information menu)
You can view information about the unit using the TV screen.
Off
Disables the eco mode.
On
Enables the eco mode.
1
2
Press ON SCREEN.
3
Use the cursor keys (e/r) to select an information type.
4
To exit from the menu, press ON SCREEN.
Use the cursor keys to select “Information” and press ENTER.
• The new setting will take effect after the unit is restarted.
• When “ECO Mode” is set to “On”, the front panel display may become dark.
• If you want to play audio at high volume, set “ECO Mode” to “Off”.
Language
Select an on-screen menu language.
Settings
English
English
日本語
Japanese
Français
French
Deutsch
German
Español
Spanish
Russian
Italiano
Italian
Chinese
• The information on the front display is provided in English only.
CONFIGURATIONS
➤ Viewing information about the unit (Information menu)
En
123
■ Network
Types of information
Displays the network information on the unit.
■ Audio Signal
(When using wired or wireless [Wi-Fi] network connection)
Displays information about the current audio signal.
Format
Audio format of the input signal
Channel
The number of source channels in the input signal
(front/surround/LFE)
For example, “5.1 (3/2/0.1)” means 5.1ch in total
(3 front channels, 2 surround channels, and LFE).
Input
IP Address
IP address
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
MAC address
Network name (the unit’s name on the network) (p.117)
Sampling
The number of samples per second of the input digital signal
MAC Address
Bitrate
The amount of data per second of the input bitstream signal
Network Name
The dialogue normalization level of the input bitstream signal
Wired/Wireless
The status of the wired or wireless connection
SSID
(When using wireless [Wi-Fi] network connection)
The SSID of the wireless network
Dialogue
Output
The speaker terminals from which signals are output
(When using Wireless Direct)
• Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the
specifications and settings of the playback device.
■ Video Signal
Displays information about the current video signal.
SSID
The SSID of the wireless network
Security
Security method
Security Key
Security key
IP Address
IP address
Subnet mask
HDMI Signal
Presence or absence of HDMI signal input/output
Subnet Mask
HDMI Resolution
Resolutions of input signal (analog or HDMI) and output signal (HDMI)
MAC Address
MAC address
Resolutions of input signal (analog) and signal output at the MONITOR OUT
jacks (analog)
Network Connection
“Wireless Direct” indication
Analog Resolution
■ HDMI Monitor
Displays information about the TVs connected to the HDMI OUT jacks.
Use the cursor keys (q/w) to switch between “OUT1” and “OUT2”.
Interface
TV interface
Video Resolution
Resolutions supported by the TV
CONFIGURATIONS
➤ Viewing information about the unit (Information menu)
En
124
■ System
Displays the system information on the unit.
Remote ID
The unit’s remote control ID setting (p.126)
Configuring the system settings
(ADVANCED SETUP menu)
TV Format
The unit’s video signal type (p.127)
Configure the system settings of the unit while viewing the front display.
Speaker Impedance
The speaker impedance setting of the unit (p.126)
System ID
System ID number
Firmware Version
The version of firmware installed on the unit
1
2
Set the unit to standby mode.
While holding down STRAIGHT on the front panel, press MAIN ZONE z.
MAIN ZONE z
STRAIGHT
• If the unit detects a newer firmware over the network, “!” (exclamation mark) appears at the upper right of
the “Information” and “System” icons, and the corresponding message will be displayed in this screen. You
can update the unit’s firmware by pressing ENTER in this screen and following the procedure in “Updating
the unit’s firmware via the network” (p.129).
■ Multi Zone
PROGRAM
Displays information about Zone2.
Input
The input source selected for Zone2
Volume
The volume for Zone2
3
4
5
Press PROGRAM to select an item.
Press STRAIGHT to select a setting.
Press MAIN ZONE z to set the unit to standby mode and turn it on
again.
The new settings take effect.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
125
ADVANCED SETUP menu items
Turning on/off the remote control sensor
(REMOTE SENSOR)
• Default settings are underlined.
Item
SPIMP.-
Function
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
Page
HD 3
SPEAKER IMP.
Changes the speaker impedance setting.
126
REMOTE SENSOR
Turns on/off of the remote control sensor on the main unit.
126
REMOTE CON AMP
Selects the unit’s remote control ID.
126
TV FORMAT
Switches the video signal type.
127
MONITOR CHECK
Removes the limitation on HDMI video output.
127
RECOV./BACKUP
Creates backup of the settings of the unit, or recovers the settings
from the backup.
127
INITIALIZE
Restores the default settings.
127
FIRM UPDATE
Updates the firmware.
128
VERSION
Checks the version of firmware currently installed on the unit.
128
HD 3
SPEAKERIMP.
8MIN
ON
Turns on the remote control sensor.
OFF
Turns off the remote control sensor.
Selecting the remote control ID (REMOTE CON AMP)
SPIMP.-
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
6  MIN
Select this option when you connect 6-ohm speakers to the unit. You
can also use 4-ohm speakers as the front speakers.
8  MIN
Select this option when you connect 8-ohm or higher speakers to the
unit.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Settings
ID1, ID2
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Settings
REMOTECONAMP
ID1
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
MUTE VOLUME
ADAPTIVE DRC
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Settings
Changing the speaker impedance setting (SPEAKER IMP.)
SPIMP.-
MUTE VOLUME
ADAPTIVE DRC
Turn on/off the remote control sensor on the main unit. While the remote control sensor
is turned off, you cannot control the unit from the remote control.
HD 3
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
REMOTESENSOR
ON
■ Changing the remote control ID of the remote control
1
To select ID1, hold down the cursor key (e) and SCENE (BD/DVD) together for
3 seconds.
To select ID2, hold down the cursor key (e) and SCENE (TV) together for 3
seconds.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
126
Switching the video signal type (TV FORMAT)
SPIMP.-
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
HD 3
TVFORMAT
NTSC
SPIMP.-
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Switch the video signal type of the unit so that it matches to the format of your TV.
Settings
NTSC, PAL
HD 3
HD 3
RECOV./BACKUP
BACKUP
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Creates backup of the settings of the unit, or recovers the settings from the backup.
1
Press STRAIGHT repeatedly to select “BACKUP” or “RECOVERY” and press INFO
to start the process.
Choices
Removing the limitation on HDMI video output
(MONITOR CHECK)
SPIMP.-
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
■ Backup/recovery procedure
Default
Canada model: NTSC
Other models: PAL
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
Backing up/recovering the settings (RECOV./BACKUP)
MONITORCHECK
YES
BACKUP
Creates backup of the settings of the unit in the internal memory.
RECOVERY
Recovers the settings of the unit from the backup (available only when
backup has been created).
Note
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in “Resolution”
(p.113) when the unit cannot detect the TV’s resolution or when you want to specify a
different resolution than the detected resolution.
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).
Restoring the default settings (INITIALIZE)
SPIMP.-
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
Settings
YES
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
• Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after “MONITOR CHECK” has been set to “SKIP”.
HD 3
INITIALIZE
CANCEL
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Restores the default settings for the unit.
Choices
VIDEO
Restores the default settings for video configurations.
ALL
Restores the default settings for the unit.
CANCEL
Does not perform an initialization.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
127
Updating the firmware (FIRM UPDATE)
SPIMP.-
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
HD 3
FIRMUPDATE
USB
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from the Yamaha website. If the unit
is connected to the Internet, you can download the firmware via the network. For
details, refer to the information supplied with updates.
■ Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to
start firmware update.
Choices
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
• If the unit detects newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the unit’s firmware by following the procedure in
“Updating the unit’s firmware via the network” (p.129).
Checking the firmware version (VERSION)
SPIMP.-
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
3
4
IN OUT 1 OUT 2 2
ENHANCER SLEEP
HD 3
VERSION
x.xx
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in “System” (p.125) in the “Information” menu.
• It may take a while until the firmware version is displayed.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
128
Updating the unit’s firmware via the network
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
3
If “UPDATE SUCCESS PLEASE POWER OFF!”
appears on the front display, press MAIN ZONE z
on the front panel.
The firmware update is complete.
Note
• Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
• If the unit is connected to the wireless network, network update may not be
possible depending on the condition of the wireless connection. In this case,
update the firmware using the USB memory device (p.128).
• If you want to update the firmware later, select “CLOSE” in Step 2. “!” (exclamation
mark) appears at the upper right of the “Information” and “System” icons, and a
message will be displayed in the “System” screen (p.125). You can update the
unit’s firmware by pressing ENTER in the “System” screen.
• For details on update, visit the Yamaha website.
Cursor keys
ENTER
• You can also update the firmware using the USB memory device from the
“ADVANCED SETUP” menu (p.128).
Information
icon
A firmware update is available if the following message is displayed
after ON SCREEN is pressed.
Message
System Icon
1
2
Read the on-screen description.
To start the firmware update, use the cursor keys to
select “START” and press ENTER.
The on-screen display turns off.
CONFIGURATIONS ➤
Updating the unit’s firmware via the network
En
129
APPENDIX
Frequently asked questions
The new speaker system does not provide an ideal sound
balance...
If you have changed speakers or have a new speaker system, use “Auto Setup” to
optimize the speaker settings again (p.38). If you want to adjust the speaker settings
manually, use “Manual Setup” in the “Setup” menu (p.108).
Since we have small children, we want to set limitations on the
volume control...
If a small child accidentally operates the controls on the main unit or remote control, the
volume may suddenly increase. This may also cause injury or damage the unit or
speakers. We recommend using “Max Volume” in the “Setup” menu to set the maximum
volume level for the unit in advance (p.112). You can also set the maximum volume for
Zone2 (p.118).
I am occasionally startled by a sudden loud sound when turning
on the unit...
By default, the volume level when the unit last entered standby mode is automatically
applied. If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the
volume to be applied when the receiver is turned on (p.112). You can also set the initial
volume for Zone2 (p.118).
We are bothered by volume differences when switching
between input sources…
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time you add a new HDMI Control-compatible device to your
system. For information on how HDMI Control works between your TV and playback
devices, refer to the instruction manuals for each device.
I want to turn off the on-screen messages displayed during
operations...
By default, short messages are displayed on the TV screen when the unit is operated
(such as input selection and volume adjustment). If the short messages bother you
when you are watching movies or sports, configure “Short Message” (p.120) in the
“Setup” menu to turn off the short messages.
I want to prevent accidental changes to the settings...
You can protect the settings configured on the unit (such as speaker settings) by
utilizing “Memory Guard” in the “Setup” menu (p.122).
The unit’s remote control is simultaneously controlling another
Yamaha product as well as the unit...
When using multiple Yamaha products, the remote control may work on another
Yamaha product or another remote control may work on the unit. If this happens,
register different remote control IDs for the devices that you want to control with each
remote control (p.126).
You can correct volume differences between input sources by utilizing “Input Trim” in
the “Option” menu (p.96).
I want to enjoy videos/audio played back on the video device
even when the unit is in standby mode...
I made HDMI connections but HDMI Control does not work at
all...
If you have connected a video device to the unit with HDMI, you can output
videos/audio played back on the video device to the TV even when the unit is in
standby mode. To use this function, set “Standby Through” (p.115) in the “Setup” menu
to “On”. You can also switch the input source using the remote control of the unit when
this function is enabled.
To use HDMI Control, you need to perform the HDMI Control link setup (p.144). After
connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,
APPENDIX
➤ Frequently asked questions
En
130
Troubleshooting
Refer to the table below when the unit does not function properly.
If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
First, check the following:
a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets
securely.
b The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on.
c The connectors of each cable are securely inserted in to jacks on each device.
Power, system and remote control
Problem
Cause
Remedy
The power does not turn on.
The protection circuitry has been activated three times
consecutively. When the unit is in this condition, the standby
indicator on the unit blinks if you try to turn on the power.
As a safety precaution, capability to turn on the power is disabled. Contact your
nearest Yamaha dealer or service center to request repair.
The power does not turn off.
The internal microcomputer has frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down MAIN ZONE z on the front panel for more than 10 seconds to
initialize and reboot the unit. (If the problem persists, disconnect the power cable
from the AC wall outlet and plug it again.)
The power turns off (standby mode) immediately.
The unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.19).
The unit enters standby mode automatically.
The unit is not reacting.
The sleep timer worked.
Turn on the unit and start playback again.
The auto-standby function kicked in because the unit was not used
for the specified time.
To disable the auto-standby function, set “Auto Power Standby” in the “Setup”
menu to “Off” (p.122).
The speaker impedance setting is incorrect.
Set the speaker impedance to match your speakers (p.126).
The protection circuitry has been activated because of a short
circuit.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.19).
The protection circuitry has been activated because the volume of
the unit is too high.
Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to
“Off” (p.123).
The internal microcomputer is frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down MAIN ZONE z on the front panel for more than 10 seconds to
initialize and reboot the unit. (If the problem persists, disconnect the power cable
from the AC wall outlet and plug it again.)
APPENDIX ➤ Troubleshooting
En
131
Problem
The unit cannot be controlled using the remote
control.
The MHL-compatible mobile device cannot be
controlled using the remote control.
Cause
Remedy
The unit is out of the operating range.
Use the remote control within the operating range (p.5).
The batteries are weak.
Replace with new batteries.
The unit’s remote control sensor is exposed to direct sunlight or
strong lighting.
Adjust the lighting angle, or reposition the unit.
(China model only)
The remote control is set to control external devices.
Press RECEIVER to set the remote control to control the unit (the key lights up in
orange).
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.126).
The mobile device or its application is not externally controllable.
Directly operate the mobile device itself.
APPENDIX ➤ Troubleshooting
En
132
Audio
Problem
No sound.
Cause
Remedy
Another input source is selected.
Select an appropriate input source with the input selection keys.
Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. To check the audio
format of the input signal, use “Audio Signal” in the “Information” menu (p.124).
The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
The maximum volume is set.
Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.112).
The volume cannot be increased.
A device connected to the output jacks of the unit is not turned on. Turn on all devices connected to the output jacks of the unit.
The playback source does not contain a signal for the channel.
To check it, use “Audio Signal” in the “Information” menu (p.124).
The currently selected sound program/decoder does not use the
speaker.
To check it, use “Test Tone” in the “Setup” menu (p.111).
Audio output of the speaker is disabled.
Perform “Auto Setup” (p.38) or use “Configuration” in the “Setup” menu to change
the speaker settings (p.108).
The volume of the speaker is set too low.
Perform “Auto Setup” (p.38) or use “Level” in the “Setup” menu to adjust the
speaker volume (p.110).
The speaker cable connecting the unit and the speaker is
defective.
If there is no problem with the connection, replace with another speaker cable.
The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists, the unit may be
malfunctioning.
The extended surround is disabled.
Use “Extended Surround” in the “Setup” menu to select a decoder to be used
(p.113).
The playback source does not contain LFE or low-frequency
signals.
To check if the subwoofer is working properly, use “Test Tone” in the “Setup” menu
(p.111).
Subwoofer output is disabled.
Perform “Auto Setup” (p.38) or set “Subwoofer” in the “Setup” menu to “Use”
(p.110).
The volume of the subwoofer is too low.
Adjust the volume on the subwoofer.
The subwoofer has been turned off by its auto-standby function.
Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The unit is set not to output audio input through HDMI jacks from
the SPEAKERS terminals.
In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.115).
The number of devices connected to the HDMI OUT jack exceeds
the limit.
Disconnect some of the HDMI devices.
No sound is coming from a specific speaker.
No sound is coming from the surround back
speaker.
No sound is coming from the subwoofer.
No sound from the playback device (connected to
the unit with HDMI).
APPENDIX ➤ Troubleshooting
En
133
Problem
No sound from the TV (when HDMI Control is
used).
Only the front speakers work on multichannel
audio.
Cause
Remedy
The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
A TV that does not support ARC is connected to the unit only with
an HDMI cable.
Use a digital optical cable to make an audio connection (p.26).
(If the TV is connected to the unit with an audio cable)
The TV audio input setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
(p.114).
(If you are trying to use ARC)
ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On” (p.115). Also, enable ARC on the TV.
The playback device is set to output 2-channel audio (such as
PCM) only.
To check it, use “Audio Signal” in the “Information” menu (p.124). If necessary,
change the digital audio output setting on the playback device.
The unit is too close to another digital or radio frequency device.
Move the unit further away from the device.
Noise/hum is heard.
The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
The volume of the unit is too high.
Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to
“Off” (p.123).
A device connected to the unit’s output jacks is not turned on.
Turn on all devices connected to the unit’s output jacks.
If the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, HDMI
audio output may be interrupted during some zone operations due
to internal circuitry switching.
For details, see “Connecting an HDMI-compatible device to play back
videos/audio” (p.85).
Cause
Remedy
Another input source is selected on the unit.
Select an appropriate input source with the input selection keys.
Another input source is selected on the TV.
Switch the TV input to display the video from the unit.
The video signal output from the unit is not supported by the TV.
Set “MONITOR CHECK” in the “ADVANCED SETUP” menu to “YES” (p.127).
The cable connecting the unit and TV (or playback device) is
defective.
If there is no problem with the connection, replace with another cable.
The input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution), use “Video
Signal” in the “Information” menu (p.124). For information about video signals
supported by the unit, see “HDMI signal compatibility” (p.146).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The number of devices connected to the HDMI OUT jack is over
the limit.
Disconnect some of the HDMI devices.
The TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them (p.26).
Another input source is selected on the TV.
Switch the TV input to display the video from the unit (HDMI OUT jack).
The sound is distorted.
The sound is interrupted.
Video
Problem
No video.
No video from the playback device (connected to
the unit with HDMI).
The menu of the unit is not displayed on the TV.
APPENDIX ➤ Troubleshooting
En
134
Problem
The video is interrupted.
Cause
Remedy
(If you are using 2 TVs in the main zone)
Another TV is turned off when “HDMI OUT 1+2” is selected.
Select “HDMI OUT 1” or “HDMI OUT 2” to output the signals only to the TV you
are using (p.54).
(If the HDMI OUT 2 jack is assigned to Zone2)
HDMI audio output may be interrupted during some zone
operations due to internal circuitry switching.
For details, see “Connecting an HDMI-compatible device to play back
videos/audio” (p.85).
Cause
Remedy
There is multi-path interference.
Adjust the FM antenna height or orientation, or place it in a different location.
FM/AM radio
Problem
Set “FM Mode” in the “Option” menu to “Mono” to select monaural FM radio
reception (p.96).
FM radio reception is weak or noisy.
Your area is too far from the FM station transmitter.
Use an outdoor FM antenna. We recommend using a sensitive multi-element
antenna.
AM radio reception is weak or noisy.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Select the station manually (p.63).
Your area is too far from the FM station transmitter.
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
Adjust the AM antenna orientation.
Radio stations cannot be selected automatically.
The AM radio signal is weak.
Select the station manually (p.63).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
AM radio stations cannot be registered as
presets.
Auto Preset has been used.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.64).
APPENDIX ➤ Troubleshooting
En
135
USB and network
Problem
Cause
Remedy
The USB device is not connected to the USB jack securely.
Turn off the unit, reconnect your USB device, and turn the unit on again.
The file system of the USB device is not FAT16 or FAT32.
Use a USB device with FAT16 or FAT32 format.
Folders and files in the USB device cannot be
viewed.
The data in the USB device is protected by the encryption.
Use a USB device without an encryption function.
The files in the USB device cannot be played back
continuously.
Files not supported by the unit exist in the selected folder.
If the unit detects a series of unsupported files (such as images and hidden files)
during playback, playback stops automatically. Do not store the unsupported files
in the playback folder.
The network feature does not function.
The network parameters (IP address) have not been obtained
properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup”
menu to “On” on the unit (p.116). If you want to configure the network parameters
manually, check that you are using an IP address which is not used by other
network devices in your network (p.116).
The unit does not detect the USB device.
The wireless router (access point) is turned off.
Turn on the wireless router.
The unit and the wireless router (access point) are too far apart.
Place the unit and the wireless router (access point) closer to each other.
There is an obstacle between the unit and the wireless router
(access point).
Move the unit and the wireless router (access point) in a location where there are
no obstacles between them.
Microwave ovens or other wireless devices in your neighborhood
might disturb the wireless communication.
Turn off these devices.
Access to the network is restricted by the firewall settings of the
wireless router (access point).
Check the firewall setting of the wireless router (access point).
The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared (p.73).
Some security software installed on your PC is blocking the access
of the unit to your PC.
Check the settings of security software installed on your PC.
The unit and PC are not in the same network.
Check the network connections and your router settings, and then connect the
unit and the PC to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your PC to allow it to access to the unit (p.116).
The files in the PC cannot be viewed or played
back.
The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server. For
information about the file formats supported by the unit, see “Playing back music
stored on media servers (PCs/NAS)” (p.73).
The files in the PC cannot be played back
continuously.
Files not supported by the unit exist in the selected folder.
If the unit detects a series of unsupported files (such as images and hidden files)
during playback, playback stops automatically. Do not store the unsupported files
in the playback folder.
The unit cannot connect to the Internet via a
wireless router (access point).
Wireless network is not found.
The unit does not detect the PC.
APPENDIX ➤ Troubleshooting
En
136
Problem
The Internet radio cannot be played.
The iPod does not recognize the unit when using
AirPlay.
Cause
Remedy
The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may have
been stopped. Try the station later or select another station.
The selected Internet radio station is currently broadcasting
silence.
Some Internet radio stations broadcast silence at certain of times of the day. Try
the station later or select another station.
Access to the network is restricted by the firewall settings of your
network devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station.
The port number varies depending on the radio station.
The unit is connected to a multiple SSID router.
Access to the unit might be restricted by the network separation function on the
router. Connect the iPod to the SSID which can access the unit.
The unit and smartphone/tablet are not in the same network.
Check the network connections and your router settings, and then connect the
unit and smartphone/tablet to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your smartphone/tablet to allow it to access to the
unit (p.116).
It may not be possible depending on the condition of the network.
Update the firmware via the network again or use a USB memory device (p.128).
The application for smartphone/tablet “AV
CONTROLLER” does not detect the unit.
Firmware update via the network is failed.
APPENDIX ➤ Troubleshooting
En
137
Error indications on the front display
Message
Cause
Remedy
Access denied
Access to the PC is denied.
Configure the sharing settings and select the unit as a device to which music contents are shared
(p.73).
Access error
The unit cannot access the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot access the iPod.
Turn off the iPod and turn it on again.
The connected iPod is not supported by the unit.
Use an iPod supported by the unit (p.67).
Make sure your router and modem are turned on.
There is a problem with the signal path from the network to the unit.
Check the connection between the unit and your router (or hub) (p.34).
Check SP Wires
The speaker cables short circuit.
Twist the bare wires of the cables firmly and connect to the unit and speakers properly.
Internal Error
An internal error has occurred.
Contact the nearest authorized Yamaha dealer or service center.
MHL Overloaded
An overcurrent is flowing through the MHL-compatible mobile
device.
Turn off the unit and check the connection between the unit and mobile device.
No content
There are no playable files in the selected folder.
Select a folder that contains files supported by the unit.
The unit cannot detect the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot detect the iPod.
Turn off the iPod and then turn it on again.
Please wait
The unit is preparing for connecting to the network.
Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn
it on again.
RemID Mismatch
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.126).
Remote Off
The unit cannot be operated from remote control because the
remote control sensor on the main unit is turned off.
Use the controls on the front panel. To use the remote control, set “REMOTE SENSOR” in the
“ADVANCED SETUP” menu to “ON” (p.126).
The unit cannot play back the songs stored on the USB device for
some reasons.
Check the song data. If it cannot be played on another device, the song data may be defective.
The unit cannot play back the songs stored on the iPod for some
reason.
Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
defective.
The unit cannot play back the songs stored on the PC for some
reason.
Check if the format of files you are trying to play is supported by the unit. For information about the
formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.73). If
the unit supports the file format, but still cannot play back any files, the network may be overloaded with
heavy traffic.
No device
Unable to play
USB Overloaded
An overcurrent is flowing through the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
Version error
Firmware update is failed.
Update the firmware again.
APPENDIX ➤
Error indications on the front display
En
138
Glossary
Audio information
■ Audio decoding format
Dolby Digital
Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
Dolby Digital EX
Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby
Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound.
Dolby Digital Plus
Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems
that support Dolby Digital. This technology is used for audio on BD (Blu-ray discs).
Dolby Pro Logic II
Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources.
Dolby Pro Logic IIx
DTS Express
DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher
compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is
developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray discs).
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports
7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the
existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on
BD (Blu-ray discs).
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home
theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
DTS Neo:6
DTS Neo:6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music
mode” for music sources and “Cinema mode” for movie sources. This technology provides discrete
full-bandwidth matrix channels of surround sound.
DSD (Direct Stream Digital)
Dolby Pro Logic IIx enables 7-channel playback from 2-channel or multichannel sources. There are three
modes available: “Music mode” for music sources, “Movie mode” for movie sources and “Game mode” for
game sources (for 2-channel sources only).
DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super
Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224 MHz. The highest
frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology
offers better audio quality than that used for CDs.
Dolby TrueHD
FLAC
Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a
high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio
formats in compression rate but provides higher audio quality.
DTS 96/24
DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit audio. This
format remains fully compatible with the existing multichannel audio systems that support DTS Digital
Surround. This technology is used for music DVDs, etc.
DTS Digital Surround
DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
DTS-ES
DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This
decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a
surround back sound is recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a
discrete surround back channel is recorded.
MP3
One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this
compression method achieves a high compression rate. Reportedly, it is capable of compressing data
quantity by about 1/10 maintaining a certain level of audio quality.
MPEG-4 AAC
An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming
services on Internet because it allows a high compression rate of data while maintaining better audio quality
than MP3.
PCM (Pulse Code Modulation)
PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This
technology is the basis of all other audio format. This technology is used as a lossless audio format called
Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray discs).
APPENDIX ➤ Glossary
En
139
Sampling frequency/Quantization bit
Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal
is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
• Sampling frequency
Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate.
When the sampling frequency is higher, the range of frequencies that can be played back are wider.
• Quantization bit
The number of quantization bits indicate the degree of accuracy when converting the sound level into a
numeric value. When the number of quantized bits is higher, the expression of the sound level is more
accurate.
WAV
Windows standard audio file format, which defines the method of recording the digital data obtained by
converting audio signals. By default, the PCM method (no compression) is used, but you can also use other
compression methods.
WMA (Windows Media Audio)
One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic
technologies, this compression method achieves a high compression rate. Reportedly, it is capable of
compressing data quantity by about 1/20 maintaining a certain level of audio quality.
■ Others
Bi-amplification connection (Bi-amp)
A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification
connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a
consequence, the tweeter and woofer provide clear audio signal without the interference.
LFE (Low Frequency Effects) 0.1 channel
This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This
channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio
effects. This channel is labeled 0.1 because it is limited to only low frequency audio.
Lip sync
Video output sometimes lags behind audio output due to the complexity of signal processing caused by an
increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag
between audio and video output.
HDMI and video information
Component video signal
With the component video signal system, the video signal is separated into the Y signal for luminance and
the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because
each of these signals is independent.
Composite video signal
With the composite video signal system, color, brightness, and synchronization data signals are combined
and transmitted with a single cable.
Deep Color
Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available
colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems
process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology
allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate
on-screen color banding for smooth tonal transitions and subtle gradations between colors.
HDMI
HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video
signal transmission. This interface transmits both digital audio and digital video signals using a single cable
without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a
secure audio/video interface. For further information on HDMI, visit the HDMI website at
“http://www.hdmi.org/”.
MHL
MHL (Mobile High-definition Link) is the interface standard for high-speed digital video signal transmission
that is developed for mobile devices. This interface transmits both digital audio and digital video signals
from mobile devices (such as smartphones) using a single cable with any loss. As with HDMI, MHL
complies with HDCP (High-bandwidth Digital Content Protection).
x.v.Color
“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than
sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with
the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid,
natural images.
APPENDIX ➤ Glossary
En
140
Network information
Yamaha technologies
SSID
CINEMA DSP (Digital Sound Field Processor)
SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.
Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is
best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions
(such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are
differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP,
Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own
home.
Wi-Fi
Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or connect to the
Internet wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the complexity of making
connections with network cables by using wireless connection. Only products that complete Wi-Fi Alliance
interoperability tests can carry the “Wi-Fi Certified” trademark.
WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy
establishment of a wireless home network.
CINEMA DSP 3D
The actually measured sound field data contain the information of the height of the sound images. CINEMA
DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the
accurate and intensive 3D sound fields in a listening room.
Compressed Music Enhancer
The Compressed Music Enhancer feature compensates for missing harmonics in compression music
formats (such as MP3). As a result, this technology provides improved performance for the overall sound
system.
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for
headphones have been set for each sound program, so that accurate representations of all the sound
programs can be enjoyed on headphones.
Virtual CINEMA DSP
Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with
front left and right speakers. Even if the surround speakers are not connected, the unit creates the realistic
sound field in a listening room.
Virtual CINEMA FRONT
Virtual CINEMA FRONT allows the system to virtually reproduce the sound field of the surround speakers
with front surround speakers. Even if the surround speakers placed in the front, the unit creates the realistic
sound field in a listening room.
Virtual Presence Speaker (VPS)
Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without
front presence speakers. Even if the front presence speakers are not connected, the unit creates the 3D
sound field in your room.
APPENDIX ➤ Glossary
En
141
Supported devices and file formats
■ Supported devices
About HTC Connect
This receiver features “HTC Connect”, a simple way to enjoy all music content from
your HTC Connect certified smartphone.
❑ USB devices
1. HTC Connect music streaming provided on this product has been developed based on
interoperability testing as defined by the HTC Connect program with the HTC Connect
compatible smartphones.
• This unit supports USB mass storage class devices (e.g., flash memories or portable
audio players) using FAT16 or FAT32 format.
2. HTC Connect has been tested with MP3, AAC, WMA and WAV encoding formats. Other
formats may not be compatible.
• Do not connect devices other than USB mass storage class devices (such as USB
chargers or USB hubs), PCs, card readers, an external HDD, etc.
3. High network congestion may interfere with the operation of HTC Connect.
• USB devices with encryption cannot be used.
• Some features may not be compatible, depending on the model or manufacturer of
the USB storage device.
❑ iPod
Made for.
iPod touch (2nd, 3rd, 4th and 5th generation)
iPod nano (2nd, 3rd, 4th, 5th, 6th and 7th generation)
iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G
iPad (4th generation), iPad mini, iPad (3rd generation), iPad 2, iPad
(as of April 2014)
4. Music navigation via the music progress bar is not currently supported with HTC
Connect.
Please check HTC website for up to date information about features, compatible
devices and audio format support: http://www.htc-connect.com/certified-devices
■ File formats
❑ USB
• The unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC,
FLAC and ALAC (Apple Lossless Audio Codec) files (1- or 2-channel audio only).
• The unit is compatible with sampling rate of up to 192 kHz for WAV and FLAC files,
96 kHz for ALAC files, and 48 kHz for other files.
• The unit supports gapless playback of WAV, FLAC and ALAC files.
• An iPod may not be detected by the unit or some features may not be compatible,
depending on the model or software version of the iPod.
❑ AirPlay
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X
Mountain Lion, and Mac and PC with iTunes 10.2.2 or later.
(as of April 2014)
• Digital Rights Management (DRM) contents cannot be played back.
❑ PC/NAS
• The unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC,
FLAC and ALAC (Apple Lossless Audio Codec) files.
• The unit is compatible with sampling rate of up to 192 kHz for WAV and FLAC files,
96 kHz for ALAC files, and 48 kHz for other files.
• The unit supports gapless playback of WAV, FLAC and ALAC files.
• To play back FLAC files, you need to install server software that supports sharing of
FLAC files via DLNA on your PC or use a NAS that supports FLAC files.
• Digital Rights Management (DRM) contents cannot be played back.
APPENDIX ➤ Supported devices and file formats
En
142
Video signal flow
Video signals input from a video device to the unit are
output to a TV as shown below.
■ Video conversion table
• You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” (p.113) in the “Setup” menu.
• The unit does not convert 480-line and 576-line video signals interchangeably.
Video device
The unit
HDMI out
TV
Resolution
480i/
576i
480p/
576p
720p
1080i
1080p
4K
480i/576i
m
m
m
m
m
m
m
m
m
m
m
720p
m
m
m
m
1080i
m
m
m
m
1080p/
50, 60 Hz
m
m
m
m
m
m
480p/576p
HDMI in
HDMI out
HDMI
HDMI
HDMI
HDMI
HDMI in
1080p/24 Hz
COMPONENT
VIDEO
COMPONENT
VIDEO
m
m
m
m
m
m
m
m
m
m
COMPONENT
720p
VIDEO in
m
m
m
m
1080i
m
m
m
m
480i/576i
COMPONENT
VIDEO out
COMPONENT
VIDEO
COMPONENT
VIDEO
PR
PR
PR
PR
PB
PB
PB
PB
Y
Y
Y
Y
m
480p/576p
VIDEO
VIDEO
480p/
576p
720p
1080i
1080p
480i/
576i
m
m
m
m
m
1080p
VIDEO in
480i/
576i
m
4K
COMPONENT
VIDEO in
VIDEO
out
COMPONENT VIDEO out
VIDEO out
VIDEO
VIDEO
VIDEO in
480i/576i
m
m
m
m
m
m
m
m: Available
APPENDIX ➤ Supported devices and file formats
En
143
Multi-zone output
Information on HDMI
■ Audio output
Using the unit’s
internal amplifier (p.23)
HDMI Control
Using an external amplifier (p.84)
Zone2 Out
EXTRA SP jacks
ZONE OUT jacks
In
HDMI OUT 2
(ZONE OUT) jack (*1)
m (*2)
Digital audio (HDMI)
Analog audio
(AUDIO)
m
m
USB (including iPod)
m
m
Network sources
m
m
TUNER
m
m
HDMI Control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations. You can also control playback
devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with
an HDMI cable.
For details on connections, see “Connecting a TV” (p.26) and “Connecting video
devices (such as BD/DVD players)” (p.28).
Operations available from the TV’s remote control
• Standby synchronization
m: Available
*1 Available when “HDMI OUT2 Assign” (p.119) in the “Setup” menu is set to “Zone2”
*2 Stereo output [down mixed to 2-channels] when the input source selected in the main zone is selected
• Volume control including mute
• Switching to input audio from the TV when the TV input is switched to its built-in tuner
• Switching to input video/audio from the selected playback device
• Switching between audio output devices (the unit or TV speaker)
(Example)
■ Video output
Zone2 Out
In
MONITOR OUT/ZONE OUT jacks (*3)
COMPONENT VIDEO
VIDEO
m
HDMI video
Component video
Composite video
m
HDMI Control
HDMI Control
HDMI OUT 2 (ZONE OUT)
jack (*4)
Playback device
also turns off
The unit turns off
(standby)
Turn off the TV
m
m: Available
*3 Available when “Monitor Out Assign” (p.119) in the “Setup” menu is set to “Zone2”
*4 Available when “HDMI OUT2 Assign” (p.119) in the “Setup” menu is set to “Zone2”
Operations available from the unit’s remote control
• Starting playback on the playback device and turning on the TV with a scene
selection (p.55)
• Switching the TV input to display the on-screen menu (when ON SCREEN is pressed)
• Controlling the playback device (playback and menu operations) using the external
device operation keys
APPENDIX
➤ Information on HDMI
En
144
d Use the cursor keys (e/r) to select “HDMI”.
(Example)
HDMI Control
HDMI Control
Turns on and displays
video from the playback
device
Playback starts
Press SCENE (BD/DVD)
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
e Use the cursor keys (q/w) to select “HDMI Control” and press ENTER.
For details on settings and operating your TV, refer to the instruction manual for the TV.
f Use the cursor keys to select “On”.
g Press ON SCREEN.
• This setup is required every time you add a new HDMI Control-compatible device to your system.
1
2
3
Enable HDMI Control on the TV and playback devices (such as HDMI
Control-compatible BD/DVD players).
4
Turn off the main power of the TV and then turn off the unit and
playback devices.
5
6
7
Turn on the unit and playback devices and then turn on the TV.
Turn on the unit, TV, and playback devices.
Configure the settings of the unit.
a Switch the TV input to display video from the unit.
b Press ON SCREEN.
ON SCREEN
Cursor keys
ENTER
Switch the TV input to display the video from the unit.
Check the followings.
On the unit: The input to which the playback device is connected is selected.
If not, select the input source manually.
c Use the cursor keys to select “Setup” and press ENTER.
On the TV: The video from the playback device is displayed.
8
Check that the unit is properly synchronized with the TV by turning
off the TV or adjusting the TV volume with the TV remote control.
• If HDMI Control does not work properly, try unplugging the TV in Step 3 and plugging in the TV again in
Step 4. It may solve the problem. Also, HDMI Control may not work if the number of connected devices
exceeds the limit. In this case, disable HDMI Control on the devices not in use.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
• We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
• We do not assure the operation of all HDMI Control-compatible devices.
APPENDIX
➤ Information on HDMI
En
145
Audio Return Channel (ARC)
HDMI signal compatibility
ARC allows you to input TV audio to the unit with the HDMI cable which transmits video
signal to the TV.
Audio signals
Check the following after the HDMI Control settings.
Audio signal type
Audio signal format
Compatible media (example)
1
2
2ch Linear PCM
2ch, 32 to 192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio
Multichannel Linear PCM
8ch, 32 to 192 kHz, 16/20/24 bit
DVD-Audio, BD (Blu-ray disc),
HD DVD
Select a TV program with the TV remote control.
Check that the input source of the unit will be automatically switched
to “AUDIO 1” and the TV audio will be played back on the unit.
If you cannot hear the TV audio, check the following:
– “ARC” (p.115) in the “Setup” menu is set to “On”.
– The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack
marked “ARC”) on the TV.
Some HDMI jack on the TV is not compatible with ARC. For details, refer to the
instruction manual for the TV.
• If the audio is interrupted while using ARC, set “ARC” (p.115) in the “Setup” menu to “Off” and use an
audio cable (digital optical or stereo pin cable) to input TV audio to the unit (p.26).
• When using ARC, connect a TV with an HDMI cable that supports ARC.
• “AUDIO 1” is set as TV audio input at the factory. If you have connected any external device to the
AUDIO 1 jacks, use “TV Audio Input” (p.114) in the “Setup” menu to change the TV audio input
assignment. To use the SCENE function (p.56), you also need to change the input assignment for
SCENE (TV).
DSD
2 to 5.1ch, 2.8224 MHz, 1 bit
SACD
Bitstream
Dolby Digital, DTS
DVD-Video
Bitstream
(High definition audio)
Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio, DTS-HD
BD (Blu-ray disc), HD DVD
High Resolution Audio, DTS
Express
Video signals
The unit is compatible with the video signals of the following resolutions:
• VGA
• 720p/60 Hz, 50 Hz
• 480i/60 Hz
• 1080i/60 Hz, 50 Hz
• 576i/50 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 480p/60 Hz
• 4K/60 Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz
• 576p/50 Hz
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
on the type of the DVD player.
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction
manual for each device.
• To decode audio bitstream signals on the unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.
APPENDIX
➤ Information on HDMI
En
146
Reference diagram (rear panel)
• The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections.
APPENDIX
➤ Reference diagram (rear panel)
En
147
Trademarks
Manufactured under license from Dolby Laboratories. Dolby, Pro
Logic, Surround EX and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195;
7,272,567 & other U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio is a trademark of
DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
This receiver supports network connections.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi
Alliance.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Ubiquitous WPS2.0
Copyright © 2013 Ubiquitous Corp.
MHL and the MHL logo are a trademark, registered trademark or
service mark of MHL, LLC in the United States and/or other countries.
x.v.Color™
HTC, HTC Connect and the HTC Connect Logo are either registered
trademarks or trademarks of HTC Corporation.
“x.v.Color” is a trademark of Sony Corporation.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that
an electronic accessory has been designed to connect specifically
to iPod, iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or iPad
may affect wireless performance.
iTunes, AirPlay, iPad, iPhone, iPod, iPod nano, iPod touch, and Safari
are trademarks of Apple Inc., registered in the U.S. and other
countries.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
DLNA™ and DLNA CERTIFIED™ are trademarks or registered
trademarks of Digital Living Network Alliance. All rights reserved.
Unauthorized use is strictly prohibited.
Windows™
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
Internet Explorer, Windows Media Audio and Windows Media Player
are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Android™
Android is a trademark of Google Inc.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
APPENDIX
➤ Trademarks
En
148
Specifications
Input jacks
• Analog Audio
Audio x 10 (AV 1–4, AUDIO 1–4, PHONO, V-AUX)
MULTI CH INPUT x 1 (8 ch)
(FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER)
• Digital Audio (Supported frequencies: 32 kHz to 96 kHz)
Optical x 3 (AV 3–4, AUDIO 1)
Coaxial x 3 (AV 1–2, AUDIO 2)
• Video
Composite x 5 (AV 1–4, V-AUX)
Component x 3 (AV 1–3)
• HDMI Input
HDMI x 8 (AV 1–7, V-AUX*)
* V-AUX: MHL input compatible
• Video
- Dolby TrueHD
- Composite x 1
- Dolby Digital Plus
- Component x 1
- Dolby Digital
AV OUT
- DTS-HD Master Audio
- Composite x 1
- DTS-HD High Resolution Audio
• HDMI Output
NETWORK x 1 (100Base-TX/10Base-T)
Output jacks
• Analog Audio
- Speaker Out x 9 (7 ch) (FRONT L/R, CENTER,
- DTS
* barter to ZONE OUT (ZONE2)
- DSD 2-ch to 6-ch
Other jacks
• YPAO MIC x 1
• REMOTE OUT x 1
MHL
• TRIGGER OUT x 2
• Video Format (Repeater Mode)
• RS-232C x 1
HDMI
• HDMI features: Deep Color, “x.v.Color,” Auto Lip Sync, ARC
(Audio Return Channel), 3D, 4K Ultra HD
- 576i/50 Hz
- 480p/60 Hz
- 576p/50 Hz
- 720p/60 Hz, 50 Hz
- 1080i/60 Hz, 50 Hz
• Video Format (Repeater Mode)
- 480i/60 Hz
- 576i/50 Hz
- 1080p/30 Hz, 25 Hz, 24 Hz
• Audio Format
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
- 480p/60 Hz
• Current Supply Capacity: 1.0 A
- 576p/50 Hz
TUNER
- Subwoofer Out x 2 (SUBWOOFER 1–2, mono)
- 720p/60 Hz, 50 Hz
- Audio x 1 (AV OUT)
- 1080i/60 Hz, 50 Hz
- ZONE OUT x 1 (ZONE 2)
- 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• Digital Audio
- VGA
- 480i/60 Hz
• DC OUT x 1
*1 Note: Assignment is possible [ZONE2, F.PRESENCE,
SURROUND BACK L/R)
• Content Protection: HDCP compatible
• Link Function: CEC supported
- VGA
- Pre Out x 7 (FRONT L/R, CENTER, SURROUND L/R,
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
• REMOTE IN x 1
SURROUND L/R, SURROUND BACK L/R, EXTRA SP L/R*1)
BI-AMP (FRONT L/R)]
- DTS Express
HDMI OUT x 2 (HDMI OUT 1–2*)
• Others
USB x 1 (USB2.0)
• Audio Format
MONITOR OUT/ZONE OUT
• Analog Tuner
FM/AM x 1 (TUNER)
- 4K/60 Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz
Optical x 1 (AV OUT)
APPENDIX ➤ Specifications
En
149
USB
Audio Section
• Capable of iPod, Mass Storage Class USB Memory
• Rated Output Power (2-channel driven)
• Current Supply Capacity: 2.1 A
(20 Hz to 20 kHz, 0.06% THD, 8 )
Front L/R ............................................................. 110 W+110 W
Network
Center..............................................................................110 W
• PC Client Function
Surround L/R ...................................................... 110 W+110 W
• Compatible with DLNA ver. 1.5
• AirPlay supported
Surround Back L/R ............................................. 110 W+110 W
(1 kHz, 0.9% THD, 8 )
Front L/R ............................................................. 120 W+120 W
• Internet Radio
Center..............................................................................120 W
• HTC Connect supported
Surround L/R ...................................................... 120 W+120 W
• WiFi function
- Capable of WPS by PIN Method and Push-Button-Method
Surround Back L/R ............................................. 120 W+120 W
• Rated Output Power (1-channel driven)
• Output Level / Output Impedance
AV OUT ............................................................. 200 mV/1.2 k
HEADPHONE OUT............................................. 150 mV/100 
PRE OUT
SUBWOOFER (50 Hz)........................................ 1.0 V/1.2 k
Except SUBWOOFER (1 kHz)............................ 1.0 V/1.2 k
ZONE OUT ............................................................ 1.0 V/1.2 k
• Frequency Response
AUDIO 2 etc. (10 Hz to 100 kHz)................................ +0/-3 dB
• RIAA Equalization Deviation
PHONO (20 Hz to 20 kHz) ......................................... 0±0.5 dB
• Total Harmonic Distortion
PHONO to AV OUT ............................................. 0.02% or less
- Capable of Direct Connection with Mobile Device
(1 kHz, 0.9% THD, 8 )
MULTI CH INPUT to Speaker Out (Pure Direct, 70 W, 8 )
- Available Security Method: WEP, WPA-PSK (TKIP), WPA-PSK
Front L/R .....................................................................135 W/ch
............................................................................ 0.04% or less
(AES), WPA2-PSK (AES), Mixed Mode
Center ........................................................................135 W/ch
- Radio Frequency: 2.4GHz
Surround L/R ..............................................................135 W/ch
- Wireless Network Standard: IEEE 802.11 b/g
Surround Back L/R .....................................................135 W/ch
Compatible Decoding Formats
• Decoding Format
- Dolby TrueHD, Dolby Digital Plus
- Dolby Digital, Dolby Digital EX
- DTS-HD Master Audio, DTS-HD High Resolution Audio,
DTS Express
- DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
- DTS Digital Surround
• Post Decoding Format
- Dolby Pro Logic
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,
Dolby Pro Logic II Game
- Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie,
Dolby Pro Logic IIx Game
- DTS Neo:6 Music, DTS Neo:6 Cinema
• Maximum Effective Output Power (1-channel driven)
(JEITA, 1 kHz, 10% THD, 8 )
[China model]
Front L/R .....................................................................165 W/ch
Center.........................................................................165 W/ch
• Signal to Noise Ratio (IHF-A Network)
(Pure Direct, Input 1 k Shorted, Speaker Out)
PHONO .............................................................. 95 dB or more
AUDIO2 etc...................................................... 110 dB or more
• Residual Noise (IHF-A Network)
Speaker Out ....................................................... 150 µV or less
• Channel Separation
Surround L/R ..............................................................165 W/ch
(Input 1 k Shorted, 1 kHz/10 kHz)
Surround Back L/R .....................................................165 W/ch
PHONO ....................................................75 dB/60 dB or more
• Dynamic Power (IHF)
Front L/R (8/6/4/2 )...................................135/165/210/280 W
• Damping Factor
Front L/R, 1 kHz, 8  ............................................. 150 or more
AUDIO2 etc..............................................75 dB/60 dB or more
• Volume Control
Main Zone ................ MUTE, -80 dB to +16.5 dB (0.5 dB Step)
Zone2 ....................... MUTE, -80 dB to +16.5 dB (0.5 dB Step)
• Input Sensitivity / Input Impedance
PHONO (1 kHz, 100 W/8 ) ................................ 3.5 mV/47 k
AUDIO 2 etc. (1 kHz, 100 W/8 ) ...................... 200 mV/47 k
• Maximum Input Signal
PHONO (1 kHz, 0.5% THD) .............................. 60 mV or more
AUDIO 2 etc. (1 kHz, 0.5% THD) ........................ 2.4 V or more
APPENDIX ➤ Specifications
En
150
• Tone Control Characteristics
Main Zone
Bass Boost/Cut .........................±6.0 dB/50 Hz (0.5 dB Step)
Bass Turnover............................................................. 350 Hz
Treble Boost/Cut ..................... ±6.0 dB/20 kHz (0.5 dB Step)
Treble Turnover .......................................................... 3.5 kHz
Zone2
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono .................................................................3 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
Mono/Stereo ..........................................................71 dB/70 dB
• Harmonic Distortion (IHF, 1 kHz)
Mono/Stereo ............................................................ 0.5%/0.6%
Bass Boost/Cut .............................±10 dB/50 Hz (2 dB Step)
• Antenna Input................................................ 75  unbalanced
Bass Turnover............................................................. 350 Hz
AM section
Treble Boost/Cut ...........................±10 dB/50 Hz (2 dB Step)
Treble Turnover .......................................................... 3.5 kHz
• Filter Characteristics
• Tuning Range
[Canada model] ...................................... 530 kHz to 1710 kHz
[Other models] ........................................ 531 kHz to 1611 kHz
(fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround Back: Small)
General
.................................................................................. 12 dB/oct.
• Power Supply
L.P.F. (Subwoofer)..................................................... 24 dB/oct.
Video Section
• Video Signal Type
[Canada model]............................................................... NTSC
[Other models].................................................................... PAL
• Video Signal Type (Video Conversion) .....................NTSC/PAL
• Video Signal Level
Composite ............................................................. 1 Vp-p/75 
Component
Y.......................................................................... 1 Vp-p/75 
Pb/Pr ................................................................ 0.7 Vp-p/75 
• Video Maximum Input Level .......................... 1.5 Vp-p or more
• Signal to Noise Ratio ..........................................60 dB or more
• Monitor Out Frequency Response
Component (MONITOR OUT/ZONE OUT)
............................................................5 Hz to 100 MHz, ±3 dB
[Canada model] ..............................................AC 120 V, 60 Hz
[China model]..................................................AC 220 V, 50 Hz
[Australia model] .............................................AC 240 V, 50 Hz
• Power Consumption
[Canada model] ..............................................................380 W
[Other models] ................................................................420 W
• Standby Power Consumption
HDMI Control Off, Standby Through Off ..........................0.1 W
HDMI Control On, Standby Through On (No Signals)......2.4 W
Network Standby On
Wired .............................................................................3.1 W
Wi-Fi ..............................................................................3.8 W
Wireless Direct ..............................................................3.9 W
HDMI Control On, Standby Through On (No Signals),
Network Standby On (Wireless Direct).............................5.5 W
• Dimensions (W x H x D)
..................... 435 x 182 x 430 mm (17-1/8” x 7-1/8” x 16-7/8”)
* Including legs and protrusions
FM Section
• Tuning Range
[Canada model]...................................87.5 MHz to 107.9 MHz
• Reference Dimensions (W x H x D) (with wireless antenna)
..................... 435 x 242 x 437 mm (17-1/8” x 9-1/2” x 17-1/4”)
• Weight ...........................................................14.7 kg (32.4 lbs)
[Other models].................................87.50 MHz to 108.00 MHz
* Specifications are subject to change without notice.
APPENDIX ➤ Specifications
En
151
Index
Symbols
Exclamation mark (!)
Lock icon (o) 122
125, 129
Numerics
16:9 Normal (Aspect, Setup menu) 114
2.1-channel system 17
2ch Stereo (sound program) 59
3.1-channel system 17
4K Ultra HD 146
5.1-channel system 17
5ch BI-AMP (Power Amp Assign, Setup menu) 108
5ch BI-AMP (speaker configuration) 21
5ch BI-AMP +SB
(Power Amp Assign, Setup menu) 108
5ch BI-AMP +SB (speaker configuration) 22
7.1+2-channel system 16
7.1-channel system 16
7ch +1ZONE (Power Amp Assign, Setup menu) 108
7ch +1ZONE (speaker configuration) 22
7ch Stereo (sound program) 59
A
A.DRC (YPAO Volume, Option menu) 94
A.Sel (Input Settings, Option menu) 96
Access denied (error indication) 138
Access error (error indication) 138
Access Point Scan (Wireless (Wi-Fi), Setup menu)
Action Game (sound program) 59
Adaptive DRC (YPAO Volume, Option menu) 94
Adaptive DSP Level (Sound, Setup menu) 112
Adjustment (Lipsync, Setup menu) 112
ADVANCED SETUP menu 125
Advanced speaker configuration 20
Adventure (sound program) 58
AirPlay 80
AM radio listening 63
Amp (Audio Output, Setup menu) 115
50
ARC (Audio Return Channel) 146
ARC (HDMI Control, Setup menu) 115
Aspect (Video Mode, Setup menu) 114
Audio Decoder (front display information) 92
Audio file format (PC/NAS) 142
Audio file format (USB storage device) 142
Audio Output (HDMI, Setup menu) 115
Audio Return Channel (ARC) 146
Audio Select (Input Settings, Option menu) 96
Audio Signal (Information menu) 124
Auto Power Standby (ECO, Setup menu) 122
Auto Preset (FM radio) 66
Auto Setup (Speaker, Setup menu) 38
Auto/Manual Select (Lipsync, Setup menu) 111
Automatic station preset (FM radio) 66
AutoPowerStdby (ECO, Setup menu) 122
B
Backup/recovery of the settings 127
Banana plug 19
Basic playback operation 54
Basic speaker configuration 16
Bass (Tone Control, Option menu) 94
Bass Cross Over (Speaker, Setup menu) 110
Bitrate (Audio Signal, Information menu) 124
Bitstream 146
Bookmark Off (Internet radio, Option menu) 79
Bookmark On (Internet radio, Option menu) 79
C
Cellar Club (sound program) 59
Center (Speaker, Setup menu) 109
Center Image (Sound Program menu) 104
Center Width (Sound Program menu) 104
Chamber (sound program) 59
Channel (Audio Signal, Information menu) 124
Check SP Wires (error indication) 138
Check Sur. (YPAO error message) 44
CINEMA DSP 58
CINEMA DSP 3D 58
CINEMA DSP 3D Mode (Sound, Setup menu) 112
CLASSICAL (sound program subcategory) 59
Clear Preset (FM/AM radio) 66
Compressed Music Enhancer 62
Configuration (Speaker, Setup menu) 108
Crossover frequency setting (subwoofer) 38
D
DC OUT (Function, Setup menu) 121
Decode Type (Sound Program menu) 102
Decoder Mode (Input menu) 98
Decoder Off (front display information) 92
Default Gateway (IP Address, Setup menu) 116
Default Gateway (Network, Information menu) 124
Default setting restoration 127
Delay Enable (Lipsync, Setup menu) 111
Detail (Load, Scene menu) 100
Device Control (Load, Scene menu) 100
DHCP (IP Address, Setup menu) 116
Dialog (Option menu) 95
Dialog Lift (Dialogue, Option menu) 95
Dialog Lvl (Dialogue, Option menu) 95
Dialogue (Audio Signal, Information menu) 124
Dialogue (Option menu) 95
Dialogue Level (Dialogue, Option menu) 95
Dialogue Lift (Dialogue, Option menu) 95
Dialogue normalization level 124
Digital Media Controller (DMC) 98
Dimension (Sound Program menu) 104
Dimmer (Front Display) (Display Set, Setup menu) 120
Direct (Sound Program menu) 103
Direct Stream Digital (DSD) 139
Display Set (Function, Setup menu) 120
Distance (Speaker, Setup menu) 110
Distance (YPAO measurement result) 43
DLNA 73
APPENDIX
➤ Index
En
152
DMC (Digital Media Controller) 98
DMC Control (Input menu) 98
DNS Server (IP Address, Setup menu) 116
DNS Server (Network, Information menu) 124
Dolby Digital EX (Extended Surround) 113
Dolby Pro Logic (surround decoder) 61
Dolby Pro Logic II (surround decoder) 61
Dolby Pro Logic IIx (surround decoder) 61
Dolby Pro Logic IIx Movie (Extended Surround)
Dolby Pro Logic IIx Music (Extended Surround)
Drama (sound program) 58
DSD (Direct Stream Digital) 139
DSP Level (Sound Program menu) 102
DSP Program (front display information) 92
DTS Neo:6 (surround decoder) 61
DTS-ES (Extended Surround) 113
Dynamic Range (Sound, Setup menu) 112
113
113
G
Ground lead
30
H
E
ECO (Setup menu) 122
ECO Mode (ECO, Setup menu) 123
Enhancer (Option menu) 95
ENHANCER (sound mode) 62
ENTERTAINMENT (sound program subcategory)
Error indication (front display) 138
EX/ES (Extended Surround, Setup menu) 113
Extended Surround (Sound, Setup menu) 113
External power amplifier 24
Extra Bass (Subwoofer/Bass, Option menu) 95
Format (Audio Signal, Information menu) 124
Frequency (FM/AM radio) 63
Front (Speaker, Setup menu) 109
Front / Rear Balance (Sound Program menu) 103
Front 5.1-channel system 17
Front display (part names and functions) 10
Front display brightness 120
Front display information 92
Front panel (part names and functions) 8
Front panel door (front panel) 8
Front Presence (Speaker, Setup menu) 109
Function (Setup menu) 120
59
F
Filter (MAC Address Filter, Setup menu) 116
FIRM UPDATE (ADVANCED SETUP menu) 128
Firmware update 128
Firmware update (network) 128
Firmware update (USB) 128
Firmware Version (System, Information menu) 125
Firmware version check 128
FM Mode (Option menu) 96
FM radio listening 63
FM/AM radio tuning 63
Hall in Munich (sound program) 59
Hall in Vienna (sound program) 59
HDMI (Setup menu) 114
HDMI Control (HDMI, Setup menu) 114
HDMI Monitor (Information menu) 124
HDMI OUT1 (Audio Output, Setup menu) 115
HDMI OUT2 (Audio Output, Setup menu) 115
HDMI OUT2 Assign (Multi Zone, Setup menu) 119
HDMI output selection 54
HDMI signal compatibility 146
Headphones 60
Height Balance (Sound Program menu) 103
High definition audio 146
HTC Connect 142
I
In.Trim (Input Settings, Option menu) 96
Indicator (part names and functions) 10
Information display (front display) 10
Information menu 123
Information switching (front display) 92
Initial Delay (Sound Program menu) 102
Initial Volume (Sound, Setup menu) 112
Initial Volume (Zone2 Set, Setup menu) 118
INITIALIZE (ADVANCED SETUP menu) 127
Input (Audio Signal, Information menu) 124
Input Assignment (Function, Setup menu) 120
Input jack assignment 120
Input menu 97
Input Settings (Option menu) 96
Input Trim (Input Settings, Option menu) 96
Internal Error (error indication) 138
Internal Error (YPAO error message) 44
Internet radio listening 77
IP Address (Network, Information menu) 124
IP Address (Network, Setup menu) 116
iPod charge 67
iPod content playback 67
iPod content playback (AirPlay) 80
iTunes content playback (AirPlay) 80
L
Language (Setup menu) 123
Layout (Speaker, Setup menu) 110
Left / Right Balance (Sound Program menu) 103
Level (Sound Program menu) 103
Level (Speaker, Setup menu) 110
Level (YPAO measurement result) 43
Level Error (YPAO warning message) 45
LFE (Low Frequency Effects) 140
Lipsync 140
Lipsync (Sound, Setup menu) 111
LIVE/CLUB (sound program subcategory) 59
Liveness (Sound Program menu) 103
Load (Scene menu) 100
Low Frequency Effects (LFE) 140
M
MAC Address (MAC Address Filter, Setup menu) 117
MAC Address (Network, Information menu) 124
MAC Address Filter (Network, Setup menu) 116
Main Zone Set (Multi Zone, Setup menu) 118
Manual Setting (Wireless (Wi-Fi), Setup menu) 50
Manual Setup (Speaker, Setup menu) 108
Manual speaker configuration 108
APPENDIX
➤ Index
En
153
Manual station preset (FM/AM radio) 64
Max Volume (Sound, Setup menu) 112
Max Volume (Zone2 Set, Setup menu) 118
Measurement result (YPAO) 43
Media sharing setup 73
Memory Guard (Function, Setup menu) 122
Menu language selection 37
MHL Overloaded (error indication) 138
MHL-compatible mobile device 31
Monaural Mix (Sound Program menu) 103
Monitor check 127
MONITOR CHECK (ADVANCED SETUP menu) 127
Monitor Out Assign (Multi Zone, Setup menu) 119
Mono (Zone2 Set, Setup menu) 119
Mono Movie (sound program) 58
MOVIE (sound program category) 58
MOVIE THEATER (sound program subcategory) 58
Multi measurement (YPAO) 41
Multi Zone (Information menu) 125
Multi Zone (Setup menu) 118
Multiple room playback 82
Multi-zone 82
Multi-zone output 144
MUSIC (sound program category) 59
Music Video (sound program) 59
Muting 54
N
NAS (Network Attached Storage) 34
NAS content playback 74
Network (Information menu) 124
Network (Setup menu) 116
Network Attached Storage (NAS) 34
Network Connection (Network, Information menu) 124
Network Connection (Network, Setup menu) 116
Network information 124
Network Name (Network, Information menu) 124
Network Name (Network, Setup menu) 117
Network Standby (Network, Setup menu) 116
No content (error indication) 138
No device (error indication) 138
No F.PRNS SP (YPAO error message) 44
No Front SP (YPAO error message) 44
No MIC (YPAO error message) 44
No Signal (YPAO error message) 44
No Sur. SP (YPAO error message) 44
Noisy (YPAO error message) 44
NTSC (TV FORMAT, ADVANCED SETUP menu)
127
O
Option menu 93
Out of Phase (YPAO warning message) 45
Output (Audio Signal, Information menu) 124
Over Distance (YPAO warning message) 45
P
PAL (TV FORMAT, ADVANCED SETUP menu) 127
Panorama (Sound Program menu) 104
Parametric EQ (Speaker, Setup menu) 110
Party mode 88
Party Mode Set (Multi Zone, Setup menu) 119
PC content playback 74
PIN Code (Wireless (Wi-Fi), Setup menu) 51
Please wait (error indication) 138
Power Amp Assign (Speaker, Setup menu) 108
Power management 122
Power Mode (DC OUT, Setup menu) 121
Preset station selection (FM/AM radio) 64
Pure Direct 62
PURE DIRECT (sound mode) 62
Pure Direct Mode (Sound, Setup menu) 112
Q
Q factor
111
R
Rear panel (part names and functions) 11
RECOV./BACKUP (ADVANCED SETUP menu) 127
RemID Mismatch (error indication) 138
REMOTE CON AMP (ADVANCED SETUP menu) 126
Remote control (part names and functions) 13
Remote control ID setting 126
Remote control sensor setting 126
Remote ID (System, Information menu) 125
Remote Off (error indication) 138
REMOTE SENSOR (ADVANCED SETUP menu) 126
Rename (input name) 98
Rename (network name) 117
Rename (scene name) 101
Rename/Icon Select (Input menu) 98
Rename/Icon Select (Scene menu) 101
Repeat (iPod, Option menu) 69
Repeat (PC/NAS, Option menu) 76
Repeat (USB storage device, Option menu) 72
Reset (Scene menu) 101
Resolution (Video Mode, Setup menu) 113
Reverb Delay (Sound Program menu) 103
Reverb Level (Sound Program menu) 103
Reverb Time (Sound Program menu) 103
Reverse (Wiring, YPAO measurement result) 43
Roleplaying Game (sound program) 59
Room Size (Sound Program menu) 102
S
Sampling (Audio Signal, Information menu) 124
Save (Scene menu) 99
SBR → SBL (YPAO error message) 44
Scene configuration 56
SCENE function 55
SCENE link playback 56
Scene menu 99
Sci-Fi (sound program) 58
Security (Network, Information menu) 124
Security Key (Network, Information menu) 124
Setting Data Copy (Speaker, Setup menu) 108
Setting Pattern (Speaker, Setup menu) 108
Setup menu 105
Share Wi-Fi Settings (iOS)
(Wireless (Wi-Fi), Setup menu) 47
Short Message (Display Set, Setup menu) 120
Shuffle (iPod, Option menu) 69
Shuffle (PC/NAS, Option menu) 76
Shuffle (USB storage device, Option menu) 72
Signal information 124
APPENDIX
➤ Index
En
154
SILENT CINEMA 60
Simple play (iPod) 69
Single measurement (YPAO) 40
Size (YPAO measurement result) 43
Sleep timer 13
Sleep timer (Zone2) 88
Sound (Setup menu) 111
Sound field effect 58
Sound mode selection 57
Sound program 58, 59
Sound Program menu 101
Speaker (Setup menu) 108
SPEAKER IMP. (ADVANCED SETUP menu) 126
Speaker impedance 15
Speaker Impedance (System, Information menu) 125
Speaker impedance setting 18, 126
Speaker placement 16
Spectacle (sound program) 58
Sports (sound program) 59
SSID 141
SSID (Network, Information menu) 124
Standard (sound program) 58
Standby Sync (HDMI Control, Setup menu) 115
Standby Through (HDMI, Setup menu) 115
Station preset (FM/AM radio) 64
STEREO (sound program subcategory) 59
Stereo reception (FM radio) 63
STRAIGHT (sound mode) 61
Straight decode 61
Subnet Mask (IP Address, Setup menu) 116
Subnet Mask (Network, Information menu) 124
Subwoofer (Speaker, Setup menu) 110
Subwoofer Trim (Subwoofer/Bass, Option menu) 95
Subwoofer/Bass (Option menu) 95
SUR.DECODE (sound mode) 61
Surround (Speaker, Setup menu) 109
Surround Back (Speaker, Setup menu) 109
Surround Back Initial Delay
(Sound Program menu) 102
Surround Back Liveness (Sound Program menu) 103
Surround Back Room Size
(Sound Program menu) 102
Surround decoder 61
Surround Initial Delay (Sound Program menu) 102
Surround Liveness (Sound Program menu) 103
Surround Room Size (Sound Program menu) 102
SW.Trim (Subwoofer/Bass, Option menu) 95
System (Information menu) 125
System ID (System, Information menu) 125
T
Target Zone (Trigger Output, Setup menu) 121
Test Tone (Speaker, Setup menu) 111
The Bottom Line (sound program) 59
The Roxy Theatre (sound program) 59
Tone Control (Option menu) 94
Treble (Tone Control, Option menu) 94
Trigger function 36
Trigger Mode (Trigger Output, Setup menu) 121
Trigger Output1 (Function, Setup menu) 121
Trigger Output2 (Function, Setup menu) 121
TV Audio Input (HDMI Control, Setup menu) 114
TV FORMAT (ADVANCED SETUP menu) 127
TV Format (System, Information menu) 125
U
Unable to play (error indication) 138
USB Overloaded (error indication) 138
USB storage device content playback 70
User Cancel (YPAO error message) 44
V
V.Out (Input Settings, Option menu) 96
VERSION (ADVANCED SETUP menu) 128
Version error (error indication) 138
Video (Setup menu) 113
Video Mode (Video, Setup menu) 113
Video Out (Input Settings, Option menu) 96
Video Process. (Option menu) 96
Video Processing (Option menu) 96
Video Signal (Information menu) 124
Video signal flow 143
Video signal type setting 127
Virtual CINEMA DSP 60
Virtual CINEMA FRONT 60
Virtual Presence Speaker (VPS) 7
Volume (Zone2 Set, Setup menu) 118
Volume Interlock (Input menu) 98
VPS (Virtual Presence Speaker) 7
W
Wallpaper (Display Set, Setup menu) 120
Web control 89
Wi-Fi 141
Wired (Network Connection, Setup menu) 116
Wired/Wireless (Network, Information menu) 124
Wireless (Wi-Fi)
(Network Connection, Setup menu) 47, 116
Wireless Direct
(Network Connection, Setup menu) 52, 116
Wiring (YPAO measurement result) 43
WPS 141
WPS Button (Wireless (Wi-Fi), Setup menu) 49
WPS button configuration 48
Y
Yamaha Parametric room Acoustic Optimizer
(YPAO) 38
YPAO
(Yamaha Parametric room Acoustic Optimizer)
YPAO error message 44
YPAO microphone 38
YPAO Vol. (YPAO Volume, Option menu) 94
YPAO Volume (Option menu) 94
YPAO Volume (YPAO Volume, Option menu) 94
YPAO warning message 45
38
Z
Zone Rename (Main Zone Set, Setup menu) 118
Zone Rename (Zone2 Set, Setup menu) 119
Zone Scene Rename (Zone2 Set, Setup menu) 119
Zone2 Set (Multi Zone, Setup menu) 118
APPENDIX
➤ Index
En
155
© 2014 Yamaha Corporation YG259B0/EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement